- Alsa-devel - mailman.alsa-project.org

[PATCH] Add support for 2024 ROG Strix G634JZR
by Daniel Berlin via B4 Relay 01 Apr '24

01 Apr '24

From: Daniel Berlin <dberlin(a)dberlin.org> The windows driver inf says it uses the exact same tunings and setup as the older G634, and then reuses the data for ID 1043:1CAF. We do the same here. Tested on an actual laptop, sound works fine with this patch plus default fallback firmware. Signed-off-by: Daniel Berlin <dberlin(a)dberlin.org> --- sound/pci/hda/cs35l41_hda_property.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/cs35l41_hda_property.c b/sound/pci/hda/cs35l41_hda_property.c index 72ec872afb8d..25c117db3317 100644 --- a/sound/pci/hda/cs35l41_hda_property.c +++ b/sound/pci/hda/cs35l41_hda_property.c @@ -108,6 +108,7 @@ static const struct cs35l41_config cs35l41_config_table[] = { { "10431F12", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 }, { "10431F1F", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, -1, 0, 0, 0, 0 }, { "10431F62", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 0, 0, 0 }, + { "10433A60", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 }, { "17AA386F", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, -1, -1, 0, 0, 0 }, { "17AA38A9", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 2, -1, 0, 0, 0 }, { "17AA38AB", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 2, -1, 0, 0, 0 }, @@ -496,6 +497,7 @@ static const struct cs35l41_prop_model cs35l41_prop_model_table[] = { { "CSC3551", "10431F12", generic_dsd_config }, { "CSC3551", "10431F1F", generic_dsd_config }, { "CSC3551", "10431F62", generic_dsd_config }, + { "CSC3551", "10433A60", generic_dsd_config }, { "CSC3551", "17AA386F", generic_dsd_config }, { "CSC3551", "17AA38A9", generic_dsd_config }, { "CSC3551", "17AA38AB", generic_dsd_config }, --- base-commit: 39cd87c4eb2b893354f3b850f916353f2658ae6f change-id: 20240401-add-rog-strix-16-g634jzr-9e5490cadc2b Best regards, -- Daniel Berlin <dberlin(a)dberlin.org>

1 0

[PATCH] ALSA: soc/au1x: declare that FIFO is reported in frames
by Oswald Buddenhagen 01 Apr '24

01 Apr '24

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen(a)gmx.de> --- Is this right? The comment on the field says "fifo entries of AC97/I2S PSC", which suggests frames, but that may mean whatever. Cc: Manuel Lauss <mano(a)roarinelk.homelinux.net> --- sound/soc/au1x/dbdma2.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/soc/au1x/dbdma2.c b/sound/soc/au1x/dbdma2.c index ea01d6490cec..2c8c01a5fb8f 100644 --- a/sound/soc/au1x/dbdma2.c +++ b/sound/soc/au1x/dbdma2.c @@ -66,7 +66,8 @@ struct au1xpsc_audio_dmadata { /* PCM hardware DMA capabilities - platform specific */ static const struct snd_pcm_hardware au1xpsc_pcm_hardware = { .info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BATCH, + SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BATCH | + SNDRV_PCM_INFO_FIFO_IN_FRAMES, .period_bytes_min = AU1XPSC_PERIOD_MIN_BYTES, .period_bytes_max = 4096 * 1024 - 1, .periods_min = 2, -- 2.42.0.419.g70bf8a5751

2 1

[PATCH 00/18] ALSA: emu10k1 & emux: fixes related to wavetable playback
by Oswald Buddenhagen 01 Apr '24

01 Apr '24

this fixes the regression i introduced (though arguably, i just made it broken in a different way), and then some more. Oswald Buddenhagen (18): ALSA: emux: fix /proc teardown at module unload ALSA: emux: prune unused parameter from snd_soundfont_load_guspatch() ALSA: emux: fix validation of snd_emux.num_ports ALSA: emux: fix init of patch_info.truesize in load_data() ALSA: emu10k1: prune vestiges of SNDRV_SFNT_SAMPLE_{BIDIR,REVERSE}_LOOP support ALSA: emux: centralize & improve patch info validation ALSA: emux: improve patch ioctl data validation ALSA: emu10k1: move patch loader assertions into low-level functions ALSA: emu10k1: fix sample signedness issues in wavetable loader ALSA: emu10k1: fix playback of 8-bit wavetable samples ALSA: emu10k1: make wavetable sample playback start position exact ALSA: emu10k1: shrink blank space in front of wavetable samples ALSA: emu10k1: merge conditions in patch loader ALSA: emu10k1: fix wavetable offset recalculation ALSA: emu10k1: de-duplicate size calculations for 16-bit samples ALSA: emu10k1: improve cache behavior documentation ALSA: emu10k1: fix playback of short wavetable samples ALSA: emux: simplify snd_sf_list.callback handling include/sound/emu10k1.h | 32 +++-- include/sound/soundfont.h | 2 +- sound/isa/sb/emu8000_patch.c | 13 -- sound/pci/emu10k1/emu10k1_callback.c | 10 +- sound/pci/emu10k1/emu10k1_patch.c | 207 +++++++++++---------------- sound/pci/emu10k1/memory.c | 55 +++++-- sound/synth/emux/emux.c | 6 +- sound/synth/emux/emux_hwdep.c | 3 +- sound/synth/emux/emux_oss.c | 3 +- sound/synth/emux/emux_proc.c | 1 + sound/synth/emux/emux_seq.c | 6 +- sound/synth/emux/soundfont.c | 73 +++++++--- 12 files changed, 216 insertions(+), 195 deletions(-) -- 2.42.0.419.g70bf8a5751

2 21

[PATCH v6 0/2] ASoC: nau8325: Modify driver code and dtschema.
by Seven Lee 01 Apr '24

01 Apr '24

Revise properties description and use standard units in dtschema. The unit conversion driver based on the attribute must also be changed accordingly. Change: V1 -> V2: - Revise the driver description part for the C++ comment. - In the nau8325_clkdet_put function, modify the max variable to hard code. - Removed "Clock Detection" switch control. - modify the "ALC Enable" switch name. - Revise the dtschema for "nuvoton,dac-vref". V2 -> V3: - Properties use standard unit suffixes. - Modify the enum definition. - Driver code should be used dev_dbg(). V3 -> V4: - Properties use standard unit suffixes. - Modify the enum definition. V4 -> V5: - Properties use standard unit suffixes for vref-impedance and dac-vref. - Revise the enum definition. - Modify the code related to properties usage in the NAU8325 codec driver. - Re-arrange header files in alphabetical order. V5 -> V6: - Revise the nau8325_dac_oversampl_enum structure definition. Seven Lee (2): ASoC: dt-bindings: Added schema for "nuvoton,nau8325" ASoC: nau8325: new driver .../bindings/sound/nuvoton,nau8325.yaml | 80 ++ sound/soc/codecs/nau8325.c | 900 ++++++++++++++++++ sound/soc/codecs/nau8325.h | 391 ++++++++ 3 files changed, 1371 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml create mode 100644 sound/soc/codecs/nau8325.c create mode 100644 sound/soc/codecs/nau8325.h -- 2.25.1

3 4

Segmentation fault on Python 3.12
by GitHub issues - opened 30 Mar '24

30 Mar '24

alsa-project/alsa-python issue #9 was opened from FrancescoCeruti: When using Python 3.12, I'm getting a segmentation fault, by simply importing the `alsasq` module (`from pyalsa import alsaseq`) Not sure if this it's the same as #8, here's the backtrace: ``` (gdb) bt #0 __memset_avx512_unaligned_erms () at ../sysdeps/x86_64/multiarch/memset-vec-unaligned-erms.S:216 #1 0x00007ffff79e6122 in _PyType_AllocNoTrack (nitems=1, type=0x7ffff7f571c0 <ConstantType>) at Objects/typeobject.c:1708 #2 PyType_GenericAlloc (type=0x7ffff7f571c0 <ConstantType>, nitems=1) at Objects/typeobject.c:1722 #3 0x00007ffff79b0a0e in long_subtype_new (obase=<optimized out>, x=<optimized out>, type=0x7ffff7f571c0 <ConstantType>) at Objects/longobject.c:5616 #4 long_new_impl (obase=<optimized out>, x=<optimized out>, type=0x7ffff7f571c0 <ConstantType>) at Objects/longobject.c:5555 #5 long_new (type=0x7ffff7f571c0 <ConstantType>, args=<optimized out>, kwargs=<optimized out>) at Objects/clinic/longobject.c.h:65 #6 0x00007ffff7f49963 in Constant_create (name=name@entry=0x7ffff7f4e47c "SEQ_OPEN_INPUT", value=value@entry=2) at pyalsa/alsaseq.c:387 #7 0x00007ffff7f4abce in PyInit_alsaseq () at pyalsa/alsaseq.c:3337 #8 0x00007ffff7ac1ed1 in _PyImport_LoadDynamicModuleWithSpec (spec=spec@entry=0x7ffff71fe840, fp=fp@entry=0x0) at ./Python/importdl.c:169 #9 0x00007ffff7abee8a in _imp_create_dynamic_impl (module=<optimized out>, file=0x0, spec=0x7ffff71fe840) at Python/import.c:3775 #10 _imp_create_dynamic (module=<optimized out>, args=<optimized out>, nargs=<optimized out>) at Python/clinic/import.c.h:506 #11 0x00007ffff79cac88 in cfunction_vectorcall_FASTCALL (func=0x7ffff71972e0, args=0x7ffff71fe6c8, nargsf=<optimized out>, kwnames=0x0) at Objects/methodobject.c:422 #12 0x00007ffff790c8bf in _PyEval_EvalFrameDefault (tstate=<optimized out>, frame=<optimized out>, throwflag=<optimized out>) at Python/bytecodes.c:3254 #13 0x00007ffff7972487 in _PyObject_VectorcallTstate (kwnames=0x0, nargsf=2, args=0x7fffffffbae0, callable=0x7ffff71a4040, tstate=0x7ffff7ec3988 <_PyRuntime+459656>) at ./Include/internal/pycore_call.h:92 #14 object_vacall (tstate=tstate@entry=0x7ffff7ec3988 <_PyRuntime+459656>, base=base@entry=0x0, callable=0x7ffff71a4040, vargs=vargs@entry=0x7fffffffbb70) at Objects/call.c:850 #15 0x00007ffff79726e7 in PyObject_CallMethodObjArgs (obj=0x0, name=0x7ffff7e5c0b8 <_PyRuntime+35512>) at Objects/call.c:911 #16 0x00007ffff7ac076b in import_find_and_load (abs_name=0x7ffff7028eb0, tstate=0x7ffff7ec3988 <_PyRuntime+459656>) at Python/import.c:2779 #17 PyImport_ImportModuleLevelObject (name=name@entry=0x7ffff7028eb0, globals=globals@entry=0x0, locals=locals@entry=0x0, fromlist=fromlist@entry=0x0, level=0) at Python/import.c:2862 #18 0x00007ffff7a82496 in builtin___import___impl (level=<optimized out>, fromlist=0x0, locals=0x0, globals=0x0, name=0x7ffff7028eb0, module=<optimized out>) at Python/bltinmodule.c:275 #19 builtin___import__ (module=<optimized out>, args=<optimized out>, nargs=<optimized out>, kwnames=<optimized out>) at Python/clinic/bltinmodule.c.h:107 #20 0x00007ffff79ca9fd in cfunction_vectorcall_FASTCALL_KEYWORDS (func=0x7ffff71959e0, args=0x7ffff719ad28, nargsf=<optimized out>, kwnames=0x0) at Objects/methodobject.c:438 #21 0x00007ffff790c8bf in _PyEval_EvalFrameDefault (tstate=<optimized out>, frame=<optimized out>, throwflag=<optimized out>) at Python/bytecodes.c:3254 #22 0x00007ffff7972487 in _PyObject_VectorcallTstate (kwnames=0x0, nargsf=3, args=0x7fffffffbf60, callable=0x7ffff71a4180, tstate=0x7ffff7ec3988 <_PyRuntime+459656>) at ./Include/internal/pycore_call.h:92 #23 object_vacall (tstate=tstate@entry=0x7ffff7ec3988 <_PyRuntime+459656>, base=base@entry=0x0, callable=0x7ffff71a4180, vargs=vargs@entry=0x7fffffffbff0) at Objects/call.c:850 #24 0x00007ffff79726e7 in PyObject_CallMethodObjArgs (obj=0x0, name=name@entry=0x7ffff7e5c190 <_PyRuntime+35728>) at Objects/call.c:911 #25 0x00007ffff7ac0326 in PyImport_ImportModuleLevelObject (name=name@entry=0x7ffff71fd7d0, globals=<optimized out>, locals=locals@entry=0x7ffff71f9880, fromlist=fromlist@entry=0x7ffff71fc2e0, level=0) at Python/import.c:2931 #26 0x00007ffff791562e in import_name (level=0x7ffff7e542c8 <_PyRuntime+3272>, fromlist=0x7ffff71fc2e0, name=0x7ffff71fd7d0, frame=<optimized out>, tstate=0x7ffff71959e0) at Python/ceval.c:2482 #27 _PyEval_EvalFrameDefault (tstate=tstate@entry=0x7ffff7ec3988 <_PyRuntime+459656>, frame=<optimized out>, frame@entry=0x7ffff7f9b020, throwflag=throwflag@entry=0) at Python/bytecodes.c:2135 #28 0x00007ffff7a89247 in _PyEval_EvalFrame (throwflag=0, frame=0x7ffff7f9b020, tstate=0x7ffff7ec3988 <_PyRuntime+459656>) at ./Include/internal/pycore_ceval.h:89 #29 _PyEval_Vector (args=0x0, argcount=0, kwnames=0x0, locals=0x7ffff71f9880, func=0x7ffff71da160, tstate=0x7ffff7ec3988 <_PyRuntime+459656>) at Python/ceval.c:1683 #30 PyEval_EvalCode (co=co@entry=0x7ffff70183f0, globals=globals@entry=0x7ffff71f9880, locals=locals@entry=0x7ffff71f9880) at Python/ceval.c:578 #31 0x00007ffff7ae3506 in run_eval_code_obj (tstate=tstate@entry=0x7ffff7ec3988 <_PyRuntime+459656>, co=co@entry=0x7ffff70183f0, globals=globals@entry=0x7ffff71f9880, locals=locals@entry=0x7ffff71f9880) at Python/pythonrun.c:1722 #32 0x00007ffff7ae3619 in run_mod (mod=<optimized out>, filename=filename@entry=0x7ffff712f450, globals=globals@entry=0x7ffff71f9880, locals=locals@entry=0x7ffff71f9880, flags=flags@entry=0x7fffffffc520, arena=arena@entry=0x7ffff711be30) at Python/pythonrun.c:1743 #33 0x00007ffff7ae650c in pyrun_file (flags=0x7fffffffc520, closeit=1, locals=0x7ffff71f9880, globals=0x7ffff71f9880, start=257, filename=0x7ffff712f450, fp=0x55555555a590) at Python/pythonrun.c:1643 #34 _PyRun_SimpleFileObject (fp=fp@entry=0x55555555a590, filename=filename@entry=0x7ffff712f450, closeit=closeit@entry=1, flags=flags@entry=0x7fffffffc520) at Python/pythonrun.c:433 #35 0x00007ffff7ae6afc in _PyRun_AnyFileObject (fp=0x55555555a590, filename=filename@entry=0x7ffff712f450, closeit=closeit@entry=1, flags=flags@entry=0x7fffffffc520) at Python/pythonrun.c:78 #36 0x00007ffff7b0d72c in pymain_run_file_obj (skip_source_first_line=0, filename=0x7ffff712f450, program_name=0x7ffff7148880) at Modules/main.c:360 #37 pymain_run_file (config=0x7ffff7e66568 <_PyRuntime+77672>) at Modules/main.c:379 #38 pymain_run_python (exitcode=exitcode@entry=0x7fffffffc634) at Modules/main.c:629 #39 0x00007ffff7b0db66 in Py_RunMain () at Modules/main.c:709 #40 0x00007ffff7b0dd1a in pymain_main (args=0x7fffffffc660) at Modules/main.c:739 #41 Py_BytesMain (argc=<optimized out>, argv=<optimized out>) at Modules/main.c:763 #42 0x00007ffff7557cd0 in __libc_start_call_main (main=main@entry=0x555555555040 <main>, argc=argc@entry=2, argv=argv@entry=0x7fffffffc7e8) at ../sysdeps/nptl/libc_start_call_main.h:58 #43 0x00007ffff7557d8a in __libc_start_main_impl (main=0x555555555040 <main>, argc=2, argv=0x7fffffffc7e8, init=<optimized out>, fini=<optimized out>, rtld_fini=<optimized out>, stack_end=0x7fffffffc7d8) at ../csu/libc-start.c:360 #44 0x0000555555555075 in _start () ``` Issue URL : https://github.com/alsa-project/alsa-python/issues/9 Repository URL: https://github.com/alsa-project/alsa-python

1 0

[PATCH] ALSA: hda/realtek: Add quirks for ASUS Laptops using CS35L56
by Simon Trimmer 30 Mar '24

30 Mar '24

These ASUS laptops use the Realtek HDA codec combined with a number of CS35L56 amplifiers. The SSID of the GA403U matches a previous ASUS laptop - we can tell them apart because they use different codecs. Signed-off-by: Simon Trimmer <simont(a)opensource.cirrus.com> --- sound/pci/hda/patch_realtek.c | 53 ++++++++++++++++++++++++++++++++++- 1 file changed, 52 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index a17c36a36aa5..7d229f4a8aa6 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6875,11 +6875,38 @@ static void alc287_fixup_legion_16ithg6_speakers(struct hda_codec *cdc, const st comp_generic_fixup(cdc, action, "i2c", "CLSA0101", "-%s:00-cs35l41-hda.%d", 2); } +static void cs35l56_fixup_i2c_two(struct hda_codec *cdc, const struct hda_fixup *fix, int action) +{ + comp_generic_fixup(cdc, action, "i2c", "CSC3556", "-%s:00-cs35l56-hda.%d", 2); +} + +static void cs35l56_fixup_i2c_four(struct hda_codec *cdc, const struct hda_fixup *fix, int action) +{ + comp_generic_fixup(cdc, action, "i2c", "CSC3556", "-%s:00-cs35l56-hda.%d", 4); +} + +static void cs35l56_fixup_spi_two(struct hda_codec *cdc, const struct hda_fixup *fix, int action) +{ + comp_generic_fixup(cdc, action, "spi", "CSC3556", "-%s:00-cs35l56-hda.%d", 2); +} + static void cs35l56_fixup_spi_four(struct hda_codec *cdc, const struct hda_fixup *fix, int action) { comp_generic_fixup(cdc, action, "spi", "CSC3556", "-%s:00-cs35l56-hda.%d", 4); } +static void alc285_fixup_asus_ga403u(struct hda_codec *cdc, const struct hda_fixup *fix, int action) +{ + /* + * The same SSID has been re-used in different hardware, they have + * different codecs and the newer GA403U has a ALC285. + */ + if (cdc->core.vendor_id == 0x10ec0285) + cs35l56_fixup_i2c_two(cdc, fix, action); + else + alc_fixup_inv_dmic(cdc, fix, action); +} + static void tas2781_fixup_i2c(struct hda_codec *cdc, const struct hda_fixup *fix, int action) { @@ -7436,6 +7463,10 @@ enum { ALC256_FIXUP_ACER_SFG16_MICMUTE_LED, ALC256_FIXUP_HEADPHONE_AMP_VOL, ALC245_FIXUP_HP_SPECTRE_X360_EU0XXX, + ALC285_FIXUP_CS35L56_SPI_2, + ALC285_FIXUP_CS35L56_I2C_2, + ALC285_FIXUP_CS35L56_I2C_4, + ALC285_FIXUP_ASUS_GA403U, }; /* A special fixup for Lenovo C940 and Yoga Duet 7; @@ -9643,6 +9674,22 @@ static const struct hda_fixup alc269_fixups[] = { .type = HDA_FIXUP_FUNC, .v.func = alc245_fixup_hp_spectre_x360_eu0xxx, }, + [ALC285_FIXUP_CS35L56_SPI_2] = { + .type = HDA_FIXUP_FUNC, + .v.func = cs35l56_fixup_spi_two, + }, + [ALC285_FIXUP_CS35L56_I2C_2] = { + .type = HDA_FIXUP_FUNC, + .v.func = cs35l56_fixup_i2c_two, + }, + [ALC285_FIXUP_CS35L56_I2C_4] = { + .type = HDA_FIXUP_FUNC, + .v.func = cs35l56_fixup_i2c_four, + }, + [ALC285_FIXUP_ASUS_GA403U] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc285_fixup_asus_ga403u, + }, }; static const struct snd_pci_quirk alc269_fixup_tbl[] = { @@ -10096,7 +10143,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1a83, "ASUS UM5302LA", ALC294_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x1043, 0x1a8f, "ASUS UX582ZS", ALC245_FIXUP_CS35L41_SPI_2), SND_PCI_QUIRK(0x1043, 0x1b11, "ASUS UX431DA", ALC294_FIXUP_ASUS_COEF_1B), - SND_PCI_QUIRK(0x1043, 0x1b13, "Asus U41SV", ALC269_FIXUP_INV_DMIC), + SND_PCI_QUIRK(0x1043, 0x1b13, "ASUS U41SV/GA403U", ALC285_FIXUP_ASUS_GA403U), SND_PCI_QUIRK(0x1043, 0x1b93, "ASUS G614JVR/JIR", ALC245_FIXUP_CS35L41_SPI_2), SND_PCI_QUIRK(0x1043, 0x1bbd, "ASUS Z550MA", ALC255_FIXUP_ASUS_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1043, 0x1c03, "ASUS UM3406HA", ALC287_FIXUP_CS35L41_I2C_2), @@ -10104,6 +10151,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1c33, "ASUS UX5304MA", ALC245_FIXUP_CS35L41_SPI_2), SND_PCI_QUIRK(0x1043, 0x1c43, "ASUS UX8406MA", ALC245_FIXUP_CS35L41_SPI_2), SND_PCI_QUIRK(0x1043, 0x1c62, "ASUS GU603", ALC289_FIXUP_ASUS_GA401), + SND_PCI_QUIRK(0x1043, 0x1c63, "ASUS GU605M", ALC285_FIXUP_CS35L56_SPI_2), SND_PCI_QUIRK(0x1043, 0x1c92, "ASUS ROG Strix G15", ALC285_FIXUP_ASUS_G533Z_PINS), SND_PCI_QUIRK(0x1043, 0x1c9f, "ASUS G614JU/JV/JI", ALC285_FIXUP_ASUS_HEADSET_MIC), SND_PCI_QUIRK(0x1043, 0x1caf, "ASUS G634JY/JZ/JI/JG", ALC285_FIXUP_ASUS_SPI_REAR_SPEAKERS), @@ -10115,11 +10163,14 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1d42, "ASUS Zephyrus G14 2022", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x1d4e, "ASUS TM420", ALC256_FIXUP_ASUS_HPE), SND_PCI_QUIRK(0x1043, 0x1da2, "ASUS UP6502ZA/ZD", ALC245_FIXUP_CS35L41_SPI_2), + SND_PCI_QUIRK(0x1043, 0x1df3, "ASUS UM5606", ALC285_FIXUP_CS35L56_I2C_4), SND_PCI_QUIRK(0x1043, 0x1e02, "ASUS UX3402ZA", ALC245_FIXUP_CS35L41_SPI_2), SND_PCI_QUIRK(0x1043, 0x1e11, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA502), SND_PCI_QUIRK(0x1043, 0x1e12, "ASUS UM3402", ALC287_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x1043, 0x1e51, "ASUS Zephyrus M15", ALC294_FIXUP_ASUS_GU502_PINS), SND_PCI_QUIRK(0x1043, 0x1e5e, "ASUS ROG Strix G513", ALC294_FIXUP_ASUS_G513_PINS), + SND_PCI_QUIRK(0x1043, 0x1e63, "ASUS H7606W", ALC285_FIXUP_CS35L56_I2C_2), + SND_PCI_QUIRK(0x1043, 0x1e83, "ASUS GA605W", ALC285_FIXUP_CS35L56_I2C_2), SND_PCI_QUIRK(0x1043, 0x1e8e, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x1ee2, "ASUS UM6702RA/RC", ALC287_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x1043, 0x1c52, "ASUS Zephyrus G15 2022", ALC289_FIXUP_ASUS_GA401), -- 2.34.1

2 1

[PATCH v18 00/41] Introduce QC USB SND audio offloading support
by Wesley Cheng 30 Mar '24

30 Mar '24

Several Qualcomm based chipsets can support USB audio offloading to a dedicated audio DSP, which can take over issuing transfers to the USB host controller. The intention is to reduce the load on the main processors in the SoC, and allow them to be placed into lower power modes. There are several parts to this design: 1. Adding ASoC binding layer 2. Create a USB backend for Q6DSP 3. Introduce XHCI interrupter support 4. Create vendor ops for the USB SND driver USB | ASoC -------------------------------------------------------------------- | _________________________ | |sm8250 platform card | | |_________________________| | | | | ___V____ ____V____ | |Q6USB | |Q6AFE | | |"codec" | |"cpu" | | |________| |_________| | ^ ^ ^ | | |________| | ___V____ | | |SOC-USB | | ________ ________ | | | |USB SND |<--->|QC offld|<------------>|________| | |(card.c)| | |<---------- | |________| |________|___ | | | ^ ^ | | | ____________V_________ | | | | | |APR/GLINK | __ V_______________V_____ | | | |______________________| |USB SND (endpoint.c) | | | | ^ |_________________________| | | | | ^ | | | ___________V___________ | | | |->|audio DSP | ___________V_____________ | | |_______________________| |XHCI HCD |<- | |_________________________| | Adding ASoC binding layer: soc-usb: Intention is to treat a USB port similar to a headphone jack. The port is always present on the device, but cable/pin status can be enabled/disabled. Expose mechanisms for USB backend ASoC drivers to communicate with USB SND. Create a USB backend for Q6DSP: q6usb: Basic backend driver that will be responsible for maintaining the resources needed to initiate a playback stream using the Q6DSP. Will be the entity that checks to make sure the connected USB audio device supports the requested PCM format. If it does not, the PCM open call will fail, and userpsace ALSA can take action accordingly. Introduce XHCI interrupter support: XHCI HCD supports multiple interrupters, which allows for events to be routed to different event rings. This is determined by "Interrupter Target" field specified in Section "6.4.1.1 Normal TRB" of the XHCI specification. Events in the offloading case will be routed to an event ring that is assigned to the audio DSP. Create vendor ops for the USB SND driver: qc_audio_offload: This particular driver has several components associated with it: - QMI stream request handler - XHCI interrupter and resource management - audio DSP memory management When the audio DSP wants to enable a playback stream, the request is first received by the ASoC platform sound card. Depending on the selected route, ASoC will bring up the individual DAIs in the path. The Q6USB backend DAI will send an AFE port start command (with enabling the USB playback path), and the audio DSP will handle the request accordingly. Part of the AFE USB port start handling will have an exchange of control messages using the QMI protocol. The qc_audio_offload driver will populate the buffer information: - Event ring base address - EP transfer ring base address and pass it along to the audio DSP. All endpoint management will now be handed over to the DSP, and the main processor is not involved in transfers. Overall, implementing this feature will still expose separate sound card and PCM devices for both the platorm card and USB audio device: 0 [SM8250MTPWCD938]: sm8250 - SM8250-MTP-WCD9380-WSA8810-VA-D SM8250-MTP-WCD9380-WSA8810-VA-DMIC 1 [Audio ]: USB-Audio - USB Audio Generic USB Audio at usb-xhci-hcd.1.auto-1.4, high speed This is to ensure that userspace ALSA entities can decide which route to take when executing the audio playback. In the above, if card#1 is selected, then USB audio data will take the legacy path over the USB PCM drivers, etc... This feature was validated using: - tinymix: set/enable the multimedia path to route to USB backend - tinyplay: issue playback on platform card Changelog -------------------------------------------- Changes in v18: - Rebased to usb-next, which merged in part of the series. Removed these patches. - Reworked Kconfigs for the ASoC USB related components from QCOM Q6DSP drivers to keep dependencies in place for SoC USB and USB SND. - Removed the repurposing of the stop ep sync API into existing XHCI operations. This will be solely used by the XHCI sideband for now. Changes in v17: - Fixed an issue where one patch was squashed into another. - Re-added some kconfig checks for helpers exposed in USB SND for the soc usb driver, after running different kconfigs. Changes in v16: - Modified some code layer dependencies so that soc usb can be split as a separate module. - Split the kcontrols from ASoC QCOM common layer into a separate driver - Reworked SOC USB kcontrols for controlling card + pcm offload routing and status so that there are individual controls for card and pcm devices. - Added a kcontrol remove API in SOC USB to remove the controls on the fly. This required to add some kcontrol management to SOC USB. - Removed the disconnect work and workqueue for the QC USB offload as it is not required, since QMI interface driver ensures events are handled in its own WQ. Changes in v15: - Removed some already merged XHCI changes - Separated SOC USB driver from being always compiled into SOC core. Now configurable from kconfig. - Fixed up ASoC kcontrol naming to fit guidelines. - Removed some unnecessary dummy ifdefs. - Moved usb snd offload capable kcontrol to be initialized by the platform offloading driver. Changes in v14: - Cleaned up some USB SND related feedback: - Renamed SNDUSB OFFLD playback available --> USB offload capable card - Fixed locking while checking if stream is in use - Replaced some mutex pairs with guard(mutex) Changes in v13: - Pulled in secondary/primary interrupter rework from Mathias from: https://git.kernel.org/pub/scm/linux/kernel/git/mnyman/xhci.git/log/drivers… - Did some cleanup and commit message updates, and tested on current code base. - Added mutex locking to xhci sideband to help prevent any race conditions, esp. for when accessing shared references. - Addresed concerns from Hillf about gfp_flags and locking used in qc_usb_audio_offload. - Rebased onto usb-next Changes in v12: - Updated copyright year to 2024. Happy new years! - Fixed newline format on mixer offload driver. Changes in v11: - Modified QMI format structures to be const Changes in v10: - Added new mixer for exposing kcontrol for sound card created by USB SND. This allows for applications to know which platform sound card has offload support. Will return the card number. - Broke down and cleaned up some functions/APIs within qc_audio_offload driver. - Exported xhci_initialize_ring_info(), and modified XHCI makefile to allow for the XHCI sideband to exist as a module. - Reworked the jack registration and moved it to the QCOM platform card driver, ie sm8250. - Added an SOC USB API to fetch a standard component tag that can be appended to the platform sound card. Added this tag to sm8250 if any USB path exists within the DT node. - Moved kcontrols that existed in the Q6USB driver, and made it a bit more generic, so that naming can be standardized across solutions. SOC USB is now responsible for creation of these kcontrols. - Added a SOC USB RST document explaining some code flows and implementation details so that other vendors can utilize the framework. - Addressed a case where USB device connection events are lost if usb offload driver (qc_audio_offload) is not probed when everything else has been initialized, ie USB SND, SOC USB and ASoC sound card. Add a rediscover device call during module init, to ensure that connection events will be propagated. - Rebased to usb-next. Changes in v9: - Fixed the dt binding check issue with regards to num-hc-interrupters. Changes in v8: - Cleaned up snd_soc_usb_find_priv_data() based on Mark's feedback. Removed some of the duplicate looping code that was present on previous patches. Also renamed the API. - Integrated Mathias' suggestions on his new sideband changes: https://git.kernel.org/pub/scm/linux/kernel/git/mnyman/xhci.git/log/?h=feat… - Addressed some of Mathias' fixme tags, such as: - Resetting transfer ring dequeue/enqueue pointers - Issuing stop endpoint command during ep removal - Reset ERDP properly to first segment ring during interrupter removal. (this is currently just being cleared to 0, but should be pointing to a valid segment if controller is still running. Changes in v7: - Fixed dt check error for q6usb bindings - Updated q6usb property from qcom,usb-audio-intr-num --> qcom,usb-audio-intr-idx - Removed separate DWC3 HC interrupters num property, and place limits to XHCI one. - Modified xhci_ring_to_sgtable() to use assigned IOVA/DMA address to fetch pages, as it is not ensured event ring allocated is always done in the vmalloc range. Changes in v6: - Fixed limits and description on several DT bindings (XHCI and Q6USB) - Fixed patch subjects to follow other ALSA/ASoC notations. USB SND - Addressed devices which expose multiple audio (UAC) interfaces. These devices will create a single USB sound card with multiple audio streams, and receive multiple interface probe routines. QC offload was not properly considering cases with multiple probe calls. - Renamed offload module name and kconfig to fit within the SND domain. - Renamed attach/detach endpoint API to keep the hw_params notation. Changes in v5: - Removed some unnescessary files that were included - Fixed some typos mentioned - Addressed dt-binding issues and added hc-interrupters definition to usb-xhci.yaml XHCI: - Moved secondary skip events API to xhci-ring and updated implementation - Utilized existing XHCI APIs, such as inc_deq and xhci_update_erst_dequeue() USB SND - Renamed and reworked the APIs in "sound: usb: Export USB SND APIs for modules" patch to include suggestions to utilize snd_usb_hw_params/free and to avoid generic naming. - Added a resume_cb() op for completion sake. - Addressed some locking concerns with regards to when registering for platform hooks. - Added routine to disconnect all offloaded devices during module unbind. ASoC - Replaced individual PCM parameter arguments in snd_soc_usb_connect() with new snd_soc_usb_device structure to pass along PCM info. - Modified snd_jack set report to notify HEADPHONE event, as we do not support record path. Changes in v4: - Rebased to xhci/for-usb-next - Addressed some dt-bindings comments XHCI: - Pulled in latest changes from Mathias' feature_interrupters branch: https://git.kernel.org/pub/scm/linux/kernel/git/mnyman/xhci.git/log/?h=feat… - Fixed commit text and signage for the XHCI sideband/interrupter related changes - Added some logic to address the FIXME tags mentioned throughout the commits, such as handling multi segment rings and building the SGT, locking concerns, and ep cleanup operations. - Removed some fixme tags for conditions that may not be needed/addressed. - Repurposed the new endpoint stop sync API to be utilized in other places. - Fixed potential compile issue if XHCI sideband config is not defined. ASoC: - Added sound jack control into the Q6USB driver. Allows for userpsace to know when an offload capable device is connected. USB SND: - Avoided exporting _snd_pcm_hw_param_set based on Takashi's recommendation. - Split USB QMI packet header definitions into a separate commit. This is used to properly allow the QMI interface driver to parse and route QMI packets accordingly - Added a "depends on" entry when enabling QC audio offload to avoid compile time issues. Changes in v3: - Changed prefix from RFC to PATCH - Rebased entire series to usb-next - Updated copyright years XHCI: - Rebased changes on top of XHCI changes merged into usb-next, and only added changes that were still under discussion. - Added change to read in the "num-hc-interrupters" device property. ASoC: - qusb6 USB backend - Incorporated suggestions to fetch iommu information with existing APIs - Added two new sound kcontrols to fetch offload status and offload device selection. - offload status - will return the card and pcm device in use tinymix -D 0 get 1 --> 1, 0 (offload in progress on card#1 pcm#0) - device selection - set the card and pcm device to enable offload on. Ex.: tinymix -D 0 set 1 2 0 --> sets offload on card#2 pcm#0 (this should be the USB card) USB SND: - Fixed up some locking related concerns for registering platform ops. - Moved callbacks under the register_mutex, so that - Modified APIs to properly pass more information about the USB SND device, so that the Q6USB backend can build a device list/map, in order to monitor offload status and device selection. Changes in v2: XHCI: - Replaced XHCI and HCD changes with Mathias' XHCI interrupter changes in his tree: https://git.kernel.org/pub/scm/linux/kernel/git/mnyman/xhci.git/log/?h=feat… Adjustments made to Mathias' changes: - Created xhci-intr.h to export/expose interrupter APIs versus exposing xhci.h. Moved dependent structures to this file as well. (so clients can parse out information from "struct xhci_interrupter") - Added some basic locking when requesting interrupters. - Fixed up some sanity checks. - Removed clearing of the ERSTBA during freeing of the interrupter. (pending issue where SMMU fault occurs if DMA addr returned is 64b - TODO) - Clean up pending events in the XHCI secondary interrupter. While testing USB bus suspend, it was seen that on bus resume, the xHCI HC would run into a command timeout. - Added offloading APIs to xHCI to fetch transfer and event ring information. ASoC: - Modified soc-usb to allow for multiple USB port additions. For this to work, the USB offload driver has to have a reference to the USB backend by adding a "usb-soc-be" DT entry to the device saved into XHCI sysdev. - Created separate dt-bindings for defining USB_RX port. - Increased APR timeout to accommodate the situation where the AFE port start command could be delayed due to having to issue a USB bus resume while handling the QMI stream start command. USB SND: - Added a platform ops during usb_audio_suspend(). This allows for the USB offload driver to halt the audio stream when system enters PM suspend. This ensures the audio DSP is not issuing transfers on the USB bus. - Do not override platform ops if they are already populated. - Introduce a shared status variable between the USB offload and USB SND layers, to ensure that only one path is active at a time. If the USB bus is occupied, then userspace is notified that the path is busy. Mathias Nyman (2): xhci: add helper to stop endpoint and wait for completion xhci: sideband: add initial api to register a sideband entity Wesley Cheng (39): usb: host: xhci: Export enable and disable interrupter APIs usb: host: xhci: Repurpose event handler for skipping interrupter events xhci: export XHCI IMOD setting helper for interrupters usb: host: xhci-sideband: Expose a sideband interrupter enable API usb: host: xhci-mem: Cleanup pending secondary event ring events usb: host: xhci-mem: Allow for interrupter clients to choose specific index ASoC: Add SOC USB APIs for adding an USB backend ASoC: dt-bindings: qcom,q6dsp-lpass-ports: Add USB_RX port ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp ASoC: qdsp6: q6afe: Increase APR timeout ASoC: qcom: qdsp6: Add USB backend ASoC driver for Q6 ALSA: usb-audio: Introduce USB SND platform op callbacks ALSA: usb-audio: Export USB SND APIs for modules ALSA: usb-audio: Save UAC sample size information usb: dwc3: Specify maximum number of XHCI interrupters usb: host: xhci-plat: Set XHCI max interrupters if property is present ALSA: usb-audio: qcom: Add USB QMI definitions ALSA: usb-audio: qcom: Introduce QC USB SND offloading support ALSA: usb-audio: Check for support for requested audio format ASoC: usb: Add PCM format check API for USB backend ASoC: qcom: qdsp6: Ensure PCM format is supported by USB audio device ALSA: usb-audio: Prevent starting of audio stream if in use ALSA: usb-audio: Do not allow USB offload path if PCM device is in use ASoC: dt-bindings: Update example for enabling USB offload on SM8250 ALSA: usb-audio: qcom: Populate PCM and USB chip information ASoC: qcom: qdsp6: Add support to track available USB PCM devices ASoC: Introduce SND kcontrols to select sound card and PCM device ASoC: qcom: qdsp6: Add SOC USB offload select get/put callbacks ASoC: Introduce SND kcontrols to track USB offloading state ASoC: qcom: qdsp6: Add PCM ops to track current state ASoC: usb: Create SOC USB SND jack kcontrol ASoC: qcom: qdsp6: Add headphone jack for offload connection status ASoC: usb: Fetch ASoC sound card information ALSA: usb-audio: Add USB offloading capable kcontrol ALSA: usb-audio: Allow for rediscovery of connected USB SND devices ALSA: usb-audio: qcom: Use card and PCM index from QMI request ASoC: usb: Rediscover USB SND devices on USB port add ASoC: qcom: Populate SoC components string ASoC: doc: Add documentation for SOC USB .../bindings/sound/qcom,sm8250.yaml | 15 + Documentation/sound/soc/index.rst | 1 + Documentation/sound/soc/usb.rst | 611 ++++++ drivers/usb/dwc3/core.c | 12 + drivers/usb/dwc3/core.h | 2 + drivers/usb/dwc3/host.c | 3 + drivers/usb/host/Kconfig | 9 + drivers/usb/host/Makefile | 2 + drivers/usb/host/xhci-mem.c | 37 +- drivers/usb/host/xhci-plat.c | 2 + drivers/usb/host/xhci-ring.c | 50 +- drivers/usb/host/xhci-sideband.c | 439 ++++ drivers/usb/host/xhci.c | 48 +- drivers/usb/host/xhci.h | 18 +- .../sound/qcom,q6dsp-lpass-ports.h | 1 + include/linux/usb/xhci-sideband.h | 70 + include/sound/q6usboffload.h | 20 + include/sound/soc-usb.h | 182 ++ sound/soc/Kconfig | 10 + sound/soc/Makefile | 2 + sound/soc/qcom/Kconfig | 15 + sound/soc/qcom/Makefile | 2 + sound/soc/qcom/qdsp6/Makefile | 1 + sound/soc/qcom/qdsp6/q6afe-dai.c | 60 + sound/soc/qcom/qdsp6/q6afe.c | 193 +- sound/soc/qcom/qdsp6/q6afe.h | 36 +- sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c | 23 + sound/soc/qcom/qdsp6/q6dsp-lpass-ports.h | 1 + sound/soc/qcom/qdsp6/q6routing.c | 9 + sound/soc/qcom/qdsp6/q6usb.c | 408 ++++ sound/soc/qcom/sm8250.c | 15 +- sound/soc/qcom/usb_offload_utils.c | 51 + sound/soc/qcom/usb_offload_utils.h | 26 + sound/soc/soc-usb.c | 660 ++++++ sound/usb/Kconfig | 25 + sound/usb/Makefile | 2 +- sound/usb/card.c | 109 + sound/usb/card.h | 15 + sound/usb/endpoint.c | 1 + sound/usb/format.c | 1 + sound/usb/helper.c | 1 + sound/usb/pcm.c | 104 +- sound/usb/pcm.h | 11 + sound/usb/qcom/Makefile | 6 + sound/usb/qcom/mixer_usb_offload.c | 65 + sound/usb/qcom/mixer_usb_offload.h | 17 + sound/usb/qcom/qc_audio_offload.c | 1914 +++++++++++++++++ sound/usb/qcom/usb_audio_qmi_v01.c | 892 ++++++++ sound/usb/qcom/usb_audio_qmi_v01.h | 162 ++ 49 files changed, 6306 insertions(+), 53 deletions(-) create mode 100644 Documentation/sound/soc/usb.rst create mode 100644 drivers/usb/host/xhci-sideband.c create mode 100644 include/linux/usb/xhci-sideband.h create mode 100644 include/sound/q6usboffload.h create mode 100644 include/sound/soc-usb.h create mode 100644 sound/soc/qcom/qdsp6/q6usb.c create mode 100644 sound/soc/qcom/usb_offload_utils.c create mode 100644 sound/soc/qcom/usb_offload_utils.h create mode 100644 sound/soc/soc-usb.c create mode 100644 sound/usb/qcom/Makefile create mode 100644 sound/usb/qcom/mixer_usb_offload.c create mode 100644 sound/usb/qcom/mixer_usb_offload.h create mode 100644 sound/usb/qcom/qc_audio_offload.c create mode 100644 sound/usb/qcom/usb_audio_qmi_v01.c create mode 100644 sound/usb/qcom/usb_audio_qmi_v01.h

2 47

Sending 0xFx events causes libasound to segfault
by GitHub issues - edited 29 Mar '24

29 Mar '24

alsa-project/alsa-lib issue #392 was edited from human222: ALSA 1.1.9. This issue breaks DOSBox-X MIDI playback. Discovered through this thread: https://github.com/joncampbell123/dosbox-x/issues/4873 In particular, this comment: https://github.com/joncampbell123/dosbox-x/issues/4873#issuecomment-2026694… Issue URL : https://github.com/alsa-project/alsa-lib/issues/392 Repository URL: https://github.com/alsa-project/alsa-lib

1 0

Sending 0xFx events causes libasound to segfault
by GitHub issues - opened 29 Mar '24

29 Mar '24

alsa-project/alsa-lib issue #392 was opened from human222: ALSA 1.1.9. This issue breaks DOSBox-X MIDI playback. Discovered through this thread: https://github.com/joncampbell123/dosbox-x/issues/4873 Issue URL : https://github.com/alsa-project/alsa-lib/issues/392 Repository URL: https://github.com/alsa-project/alsa-lib

1 0

[PATCH V2] ASoC: amd: acp: fix for acp_init function error handling
by Vijendar Mukunda 29 Mar '24

29 Mar '24

If acp_init() fails, acp pci driver probe should return error. Add acp_init() function return value check logic. Fixes: e61b415515d3 ("ASoC: amd: acp: refactor the acp init and de-init sequence") Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda(a)amd.com> --- changes from v1->v2: - handle clean up sequence instead of returning error directly sound/soc/amd/acp/acp-pci.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/sound/soc/amd/acp/acp-pci.c b/sound/soc/amd/acp/acp-pci.c index 440b91d4f261..5f35b90eab8d 100644 --- a/sound/soc/amd/acp/acp-pci.c +++ b/sound/soc/amd/acp/acp-pci.c @@ -115,7 +115,10 @@ static int acp_pci_probe(struct pci_dev *pci, const struct pci_device_id *pci_id goto unregister_dmic_dev; } - acp_init(chip); + ret = acp_init(chip); + if (ret) + goto unregister_dmic_dev; + res = devm_kcalloc(&pci->dev, num_res, sizeof(struct resource), GFP_KERNEL); if (!res) { ret = -ENOMEM; -- 2.34.1

2 1