- Alsa-devel - mailman.alsa-project.org

[PATCH v1] ALSA: hda/realtek: Add support for ASUS Zenbook 2024 HN7306W
by Stefan Binding 08 May '24

08 May '24

This laptop uses CS35L41 HDA with 2 amps using I2C and Internal Boost. Signed-off-by: Stefan Binding <sbinding(a)opensource.cirrus.com> --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 8502b30d5d5d..8c157158f1cb 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -10276,6 +10276,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1e63, "ASUS H7606W", ALC285_FIXUP_CS35L56_I2C_2), SND_PCI_QUIRK(0x1043, 0x1e83, "ASUS GA605W", ALC285_FIXUP_CS35L56_I2C_2), SND_PCI_QUIRK(0x1043, 0x1e8e, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA401), + SND_PCI_QUIRK(0x1043, 0x1ed3, "ASUS HN7306W", ALC287_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x1043, 0x1ee2, "ASUS UM6702RA/RC", ALC287_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x1043, 0x1c52, "ASUS Zephyrus G15 2022", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x1f11, "ASUS Zephyrus G14", ALC289_FIXUP_ASUS_GA401), -- 2.34.1

2 1

[PATCH 0/4] ASoC: Constify static snd_pcm_hardware
by Krzysztof Kozlowski 08 May '24

08 May '24

No dependencies. Static 'struct snd_pcm_hardware' is not modified by few drivers and its copy is passed to the core, so it can be made const for increased code safety. Best regards, Krzysztof --- Krzysztof Kozlowski (4): ASoC: qcom: Constify static snd_pcm_hardware ASoC: fsl: Constify static snd_pcm_hardware ASoC: meson: Constify static snd_pcm_hardware ASoC: uniphier: Constify static snd_pcm_hardware sound/soc/fsl/imx-pcm-rpmsg.c | 2 +- sound/soc/meson/aiu-fifo-i2s.c | 2 +- sound/soc/meson/aiu-fifo-spdif.c | 2 +- sound/soc/meson/aiu-fifo.h | 2 +- sound/soc/meson/axg-fifo.c | 2 +- sound/soc/qcom/qdsp6/q6apm-dai.c | 4 ++-- sound/soc/qcom/qdsp6/q6asm-dai.c | 2 +- sound/soc/uniphier/aio-dma.c | 2 +- 8 files changed, 9 insertions(+), 9 deletions(-) --- base-commit: ebbaba914053d8bcadd7d64eb8d2555299509a27 change-id: 20240429-n-asoc-const-snd-pcm-hardware-f0a5ade885ca Best regards, -- Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org>

2 5

[PATCH AUTOSEL 6.1 01/25] ASoC: Intel: bytcr_rt5640: Apply Asus T100TA quirk to Asus T100TAM too
by Sasha Levin 08 May '24

08 May '24

From: Hans de Goede <hdegoede(a)redhat.com> [ Upstream commit e50729d742ec364895f1c389c32315984a987aa5 ] The Asus T100TA quirk has been using an exact match on a product-name of "T100TA" but there are also T100TAM variants with a slightly higher clocked CPU and a metal backside which need the same quirk. Sort the existing T100TA (stereo speakers) below the more specific T100TAF (mono speaker) quirk and switch from exact matching to substring matching so that the T100TA quirk will also match on the T100TAM models. Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Link: https://msgid.link/r/20240407191559.21596-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/intel/boards/bytcr_rt5640.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index 094445036c20f..d6ef8e850412b 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -636,28 +636,30 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { BYT_RT5640_USE_AMCR0F28), }, { + /* Asus T100TAF, unlike other T100TA* models this one has a mono speaker */ .matches = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), - DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TA"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TAF"), }, .driver_data = (void *)(BYT_RT5640_IN1_MAP | BYT_RT5640_JD_SRC_JD2_IN4N | BYT_RT5640_OVCD_TH_2000UA | BYT_RT5640_OVCD_SF_0P75 | + BYT_RT5640_MONO_SPEAKER | + BYT_RT5640_DIFF_MIC | + BYT_RT5640_SSP0_AIF2 | BYT_RT5640_MCLK_EN), }, { + /* Asus T100TA and T100TAM, must come after T100TAF (mono spk) match */ .matches = { - DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), - DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TAF"), + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "T100TA"), }, .driver_data = (void *)(BYT_RT5640_IN1_MAP | BYT_RT5640_JD_SRC_JD2_IN4N | BYT_RT5640_OVCD_TH_2000UA | BYT_RT5640_OVCD_SF_0P75 | - BYT_RT5640_MONO_SPEAKER | - BYT_RT5640_DIFF_MIC | - BYT_RT5640_SSP0_AIF2 | BYT_RT5640_MCLK_EN), }, { -- 2.43.0

1 0

[PATCH AUTOSEL 6.6 01/43] ASoC: Intel: bytcr_rt5640: Apply Asus T100TA quirk to Asus T100TAM too
by Sasha Levin 08 May '24

08 May '24

From: Hans de Goede <hdegoede(a)redhat.com> [ Upstream commit e50729d742ec364895f1c389c32315984a987aa5 ] The Asus T100TA quirk has been using an exact match on a product-name of "T100TA" but there are also T100TAM variants with a slightly higher clocked CPU and a metal backside which need the same quirk. Sort the existing T100TA (stereo speakers) below the more specific T100TAF (mono speaker) quirk and switch from exact matching to substring matching so that the T100TA quirk will also match on the T100TAM models. Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Link: https://msgid.link/r/20240407191559.21596-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/intel/boards/bytcr_rt5640.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index e609249cc38d5..651408c6f399d 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -636,28 +636,30 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { BYT_RT5640_USE_AMCR0F28), }, { + /* Asus T100TAF, unlike other T100TA* models this one has a mono speaker */ .matches = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), - DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TA"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TAF"), }, .driver_data = (void *)(BYT_RT5640_IN1_MAP | BYT_RT5640_JD_SRC_JD2_IN4N | BYT_RT5640_OVCD_TH_2000UA | BYT_RT5640_OVCD_SF_0P75 | + BYT_RT5640_MONO_SPEAKER | + BYT_RT5640_DIFF_MIC | + BYT_RT5640_SSP0_AIF2 | BYT_RT5640_MCLK_EN), }, { + /* Asus T100TA and T100TAM, must come after T100TAF (mono spk) match */ .matches = { - DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), - DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TAF"), + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "T100TA"), }, .driver_data = (void *)(BYT_RT5640_IN1_MAP | BYT_RT5640_JD_SRC_JD2_IN4N | BYT_RT5640_OVCD_TH_2000UA | BYT_RT5640_OVCD_SF_0P75 | - BYT_RT5640_MONO_SPEAKER | - BYT_RT5640_DIFF_MIC | - BYT_RT5640_SSP0_AIF2 | BYT_RT5640_MCLK_EN), }, { -- 2.43.0

1 2

[PATCH AUTOSEL 6.8 01/52] ASoC: Intel: bytcr_rt5640: Apply Asus T100TA quirk to Asus T100TAM too
by Sasha Levin 08 May '24

08 May '24

From: Hans de Goede <hdegoede(a)redhat.com> [ Upstream commit e50729d742ec364895f1c389c32315984a987aa5 ] The Asus T100TA quirk has been using an exact match on a product-name of "T100TA" but there are also T100TAM variants with a slightly higher clocked CPU and a metal backside which need the same quirk. Sort the existing T100TA (stereo speakers) below the more specific T100TAF (mono speaker) quirk and switch from exact matching to substring matching so that the T100TA quirk will also match on the T100TAM models. Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Link: https://msgid.link/r/20240407191559.21596-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/intel/boards/bytcr_rt5640.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index 05f38d1f7d824..b41a1147f1c34 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -636,28 +636,30 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { BYT_RT5640_USE_AMCR0F28), }, { + /* Asus T100TAF, unlike other T100TA* models this one has a mono speaker */ .matches = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), - DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TA"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TAF"), }, .driver_data = (void *)(BYT_RT5640_IN1_MAP | BYT_RT5640_JD_SRC_JD2_IN4N | BYT_RT5640_OVCD_TH_2000UA | BYT_RT5640_OVCD_SF_0P75 | + BYT_RT5640_MONO_SPEAKER | + BYT_RT5640_DIFF_MIC | + BYT_RT5640_SSP0_AIF2 | BYT_RT5640_MCLK_EN), }, { + /* Asus T100TA and T100TAM, must come after T100TAF (mono spk) match */ .matches = { - DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), - DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TAF"), + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "T100TA"), }, .driver_data = (void *)(BYT_RT5640_IN1_MAP | BYT_RT5640_JD_SRC_JD2_IN4N | BYT_RT5640_OVCD_TH_2000UA | BYT_RT5640_OVCD_SF_0P75 | - BYT_RT5640_MONO_SPEAKER | - BYT_RT5640_DIFF_MIC | - BYT_RT5640_SSP0_AIF2 | BYT_RT5640_MCLK_EN), }, { -- 2.43.0

1 3

[PATCH 0/4] ASoC: qcom: x1e80100: Correct channel mapping
by Krzysztof Kozlowski 07 May '24

07 May '24

Hi, First patch is a build dependency. Description =========== X1E80100 CRD is the first board, which comes with four speakers, so we still keep fixing and adding missing pieces. The board has speaker arranged as left front+back and then right front+back. Using default channel mapping causes front right speaker to play left back stream. Adjust the channel maps for frontend DAIs to fix stereo and four-channel playback. Best regards, Krzysztof --- Krzysztof Kozlowski (4): ASoC: Constify channel mapping array arguments in set_channel_map() ASoC: qcom: q6dsp: Implement proper channel mapping in Audioreach ASoC: qcom: q6dsp: Set channel mapping instead of fixed defaults ASoC: qcom: x1e80100: Correct channel mapping include/sound/cs35l41.h | 4 ++-- include/sound/soc-dai.h | 8 +++---- sound/soc/codecs/adau7118.c | 6 ++++-- sound/soc/codecs/cs35l41-lib.c | 4 ++-- sound/soc/codecs/cs35l41.c | 3 ++- sound/soc/codecs/max98504.c | 6 ++++-- sound/soc/codecs/wcd9335.c | 6 ++++-- sound/soc/codecs/wcd934x.c | 6 ++++-- sound/soc/qcom/qdsp6/audioreach.c | 14 +++++-------- sound/soc/qcom/qdsp6/audioreach.h | 1 + sound/soc/qcom/qdsp6/q6afe-dai.c | 16 ++++++++------ sound/soc/qcom/qdsp6/q6apm-dai.c | 12 +++++++++++ sound/soc/qcom/qdsp6/q6apm-lpass-dais.c | 6 ++++-- sound/soc/qcom/qdsp6/q6apm.c | 28 ++++++++++++++++++++++++- sound/soc/qcom/qdsp6/q6apm.h | 8 +++++++ sound/soc/qcom/qdsp6/topology.c | 12 +++++++++++ sound/soc/qcom/x1e80100.c | 37 +++++++++++++++++++++++++++++++-- sound/soc/soc-dai.c | 4 ++-- 18 files changed, 142 insertions(+), 39 deletions(-) --- base-commit: c5e512ffe106f751c61e5a036560f522e58eadcd change-id: 20240507-asoc-x1e80100-4-channel-mapping-ea5f02b9e678 Best regards, -- Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org>

3 9

[PATCH 0/3] ASoC: samsung: midas-audio: Add GPIO-based headset jack detection
by Artur Weber 07 May '24

07 May '24

Many of Samsung's Exynos 4 devices share the same midas-audio driver to handle the codec setup. While most of these devices, including the Midas itself, use the jack detection provided by the WM8994 driver, other devices such as the Samsung Galaxy Tab 3 8.0 (lt01) use two GPIOs and an ADC channel to determine jack insertion, the jack's type, and button presses (for headsets with volume up/down/play buttons). In the downstream kernel, this behavior is implemented in the sec-jack driver[1], and the per-device settings are configured in *-jack.c files in the mach folder (see e.g. the Tab 3's implementation[2]). This patchset implements this mechanism in the midas_wm1811.c driver, and adds new DTS options to allow for its configuration. It also enables jack detection for the Samsung Galaxy Tab 3 8.0. A very similar mechanism was already present in the aries_wm8994.c driver[3]; this implementation heavily borrows from it, though there are a few extra cleanups as well. Signed-off-by: Artur Weber <aweber.kernel(a)gmail.com> [1] https://github.com/gr8nole/android_kernel_samsung_smdk4x12/blob/lineage-14.… [2] https://github.com/gr8nole/android_kernel_samsung_smdk4x12/blob/lineage-14.… [3] https://github.com/torvalds/linux/blob/master/sound/soc/samsung/aries_wm899… --- Artur Weber (3): ASoC: dt-bindings: samsung,midas-audio: Add GPIO-based headset jack detection ASoC: samsung: midas_wm1811: Add GPIO-based headset jack detection ARM: dts: samsung: exynos4212-tab3: Fix headset mic, add jack detection .../bindings/sound/samsung,midas-audio.yaml | 30 +++ arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi | 23 +- sound/soc/samsung/Kconfig | 2 +- sound/soc/samsung/midas_wm1811.c | 265 ++++++++++++++++++++- 4 files changed, 305 insertions(+), 15 deletions(-) --- base-commit: e67572cd2204894179d89bd7b984072f19313b03 change-id: 20240502-midas-wm1811-gpio-jack-b10226b17ecc Best regards, -- Artur Weber <aweber.kernel(a)gmail.com>

2 8

[PATCH v2] ASoC: Intel: avs: boards: Properly name input device
by Amadeusz Sławiński 07 May '24

07 May '24

Machine boards expose input device for use with userspace. Current name in some cases is incorrect, fix it. Reviewed-by: Cezary Rojewski <cezary.rojewski(a)intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski(a)linux.intel.com> --- v2: - Rebase on top of correct tree. --- sound/soc/intel/avs/boards/es8336.c | 2 +- sound/soc/intel/avs/boards/nau8825.c | 2 +- sound/soc/intel/avs/boards/rt274.c | 3 ++- sound/soc/intel/avs/boards/rt286.c | 4 ++-- sound/soc/intel/avs/boards/rt298.c | 4 ++-- 5 files changed, 8 insertions(+), 7 deletions(-) diff --git a/sound/soc/intel/avs/boards/es8336.c b/sound/soc/intel/avs/boards/es8336.c index ff3bd15132694..f4919a6abc278 100644 --- a/sound/soc/intel/avs/boards/es8336.c +++ b/sound/soc/intel/avs/boards/es8336.c @@ -113,7 +113,7 @@ static int avs_es8336_codec_init(struct snd_soc_pcm_runtime *runtime) if (!pins) return -ENOMEM; - ret = snd_soc_card_jack_new_pins(card, "Headset", SND_JACK_HEADSET | SND_JACK_BTN_0, + ret = snd_soc_card_jack_new_pins(card, "Headset Jack", SND_JACK_HEADSET | SND_JACK_BTN_0, &data->jack, pins, num_pins); if (ret) return ret; diff --git a/sound/soc/intel/avs/boards/nau8825.c b/sound/soc/intel/avs/boards/nau8825.c index 3164745b15167..eef718c6b8ad9 100644 --- a/sound/soc/intel/avs/boards/nau8825.c +++ b/sound/soc/intel/avs/boards/nau8825.c @@ -96,7 +96,7 @@ static int avs_nau8825_codec_init(struct snd_soc_pcm_runtime *runtime) * 4 buttons here map to the google Reference headset. * The use of these buttons can be decided by the user space. */ - ret = snd_soc_card_jack_new_pins(card, "Headset", SND_JACK_HEADSET | SND_JACK_BTN_0 | + ret = snd_soc_card_jack_new_pins(card, "Headset Jack", SND_JACK_HEADSET | SND_JACK_BTN_0 | SND_JACK_BTN_1 | SND_JACK_BTN_2 | SND_JACK_BTN_3, jack, pins, num_pins); if (ret) diff --git a/sound/soc/intel/avs/boards/rt274.c b/sound/soc/intel/avs/boards/rt274.c index e3aa28780df5a..51ebc790c6b4d 100644 --- a/sound/soc/intel/avs/boards/rt274.c +++ b/sound/soc/intel/avs/boards/rt274.c @@ -102,7 +102,8 @@ static int avs_rt274_codec_init(struct snd_soc_pcm_runtime *runtime) if (!pins) return -ENOMEM; - ret = snd_soc_card_jack_new_pins(card, "Headset", SND_JACK_HEADSET, jack, pins, num_pins); + ret = snd_soc_card_jack_new_pins(card, "Headset Jack", SND_JACK_HEADSET, jack, pins, + num_pins); if (ret) return ret; diff --git a/sound/soc/intel/avs/boards/rt286.c b/sound/soc/intel/avs/boards/rt286.c index d24316fc4db9c..67fd362962c40 100644 --- a/sound/soc/intel/avs/boards/rt286.c +++ b/sound/soc/intel/avs/boards/rt286.c @@ -63,8 +63,8 @@ static int avs_rt286_codec_init(struct snd_soc_pcm_runtime *runtime) if (!pins) return -ENOMEM; - ret = snd_soc_card_jack_new_pins(card, "Headset", SND_JACK_HEADSET | SND_JACK_BTN_0, jack, - pins, num_pins); + ret = snd_soc_card_jack_new_pins(card, "Headset Jack", SND_JACK_HEADSET | SND_JACK_BTN_0, + jack, pins, num_pins); if (ret) return ret; diff --git a/sound/soc/intel/avs/boards/rt298.c b/sound/soc/intel/avs/boards/rt298.c index 7fd28544f7869..1003e8689eacc 100644 --- a/sound/soc/intel/avs/boards/rt298.c +++ b/sound/soc/intel/avs/boards/rt298.c @@ -74,8 +74,8 @@ static int avs_rt298_codec_init(struct snd_soc_pcm_runtime *runtime) if (!pins) return -ENOMEM; - ret = snd_soc_card_jack_new_pins(card, "Headset", SND_JACK_HEADSET | SND_JACK_BTN_0, jack, - pins, num_pins); + ret = snd_soc_card_jack_new_pins(card, "Headset Jack", SND_JACK_HEADSET | SND_JACK_BTN_0, + jack, pins, num_pins); if (ret) return ret; -- 2.34.1

2 1

[PATCH 0/4] ASoC: use 'time_left' instead of 'timeout' with wait_for_*() functions
by Wolfram Sang 07 May '24

07 May '24

There is a confusing pattern in the kernel to use a variable named 'timeout' to store the result of wait_for_*() functions causing patterns like: timeout = wait_for_completion_timeout(...) if (!timeout) return -ETIMEDOUT; with all kinds of permutations. Use 'time_left' as a variable to make the code obvious and self explaining. This is part of a tree-wide series. The rest of the patches can be found here (some parts may still be WIP): git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git i2c/time_left Because these patches are generated, I audit them before sending. This is why I will send series step by step. Build bot is happy with these patches, though. No functional changes intended. Wolfram Sang (4): ASoC: codecs: wm8962: use 'time_left' variable with wait_for_completion_timeout() ASoC: codecs: wm8993: use 'time_left' variable with wait_for_completion_timeout() ASoC: codecs: wm8994: use 'time_left' variable with wait_for_completion_timeout() ASoC: codecs: wm8996: use 'time_left' variable with wait_for_completion_timeout() sound/soc/codecs/wm8962.c | 12 ++++++------ sound/soc/codecs/wm8993.c | 12 ++++++------ sound/soc/codecs/wm8994.c | 8 ++++---- sound/soc/codecs/wm8996.c | 14 +++++++------- 4 files changed, 23 insertions(+), 23 deletions(-) -- 2.43.0

3 6

[PATCH 00/13] ASoC: Use snd_soc_substream_to_rtd() for accessing private_data
by Krzysztof Kozlowski 07 May '24

07 May '24

Hi, Do not open-code snd_soc_substream_to_rtd() when accessing snd_pcm_substream->private_data. This makes code more consistent with rest of ASoC and allows in the future to move the field to any other place or add additional checks in snd_soc_substream_to_rtd(). Best regards, Krzysztof --- Krzysztof Kozlowski (13): ASoC: qcom: Use snd_soc_substream_to_rtd() for accessing private_data ASoC: tegra: Use snd_soc_substream_to_rtd() for accessing private_data ASoC: ti: Use snd_soc_substream_to_rtd() for accessing private_data ASoC: arm: Use snd_soc_substream_to_rtd() for accessing private_data ASoC: amd: Use snd_soc_substream_to_rtd() for accessing private_data ASoC: fsl: Use snd_soc_substream_to_rtd() for accessing private_data ASoC: img: Use snd_soc_substream_to_rtd() for accessing private_data ASoC: kirkwood: Use snd_soc_substream_to_rtd() for accessing private_data ASoC: loongson: Use snd_soc_substream_to_rtd() for accessing private_data ASoC: mediatek: Use snd_soc_substream_to_rtd() for accessing private_data ASoC: meson: Use snd_soc_substream_to_rtd() for accessing private_data ASoC: samsung: Use snd_soc_substream_to_rtd() for accessing private_data ASoC: sunxi: Use snd_soc_substream_to_rtd() for accessing private_data sound/arm/pxa2xx-pcm-lib.c | 4 ++-- sound/soc/amd/acp/acp-mach-common.c | 2 +- sound/soc/amd/acp3x-rt5682-max9836.c | 2 +- sound/soc/amd/ps/ps-sdw-dma.c | 2 +- sound/soc/fsl/fsl-asoc-card.c | 2 +- sound/soc/fsl/imx-card.c | 6 +++--- sound/soc/fsl/imx-hdmi.c | 2 +- sound/soc/fsl/imx-pcm-rpmsg.c | 6 +++--- sound/soc/img/img-i2s-in.c | 2 +- sound/soc/img/img-i2s-out.c | 2 +- sound/soc/kirkwood/kirkwood-dma.c | 2 +- sound/soc/loongson/loongson_card.c | 2 +- sound/soc/loongson/loongson_dma.c | 2 +- sound/soc/mediatek/mt7986/mt7986-afe-pcm.c | 4 ++-- sound/soc/mediatek/mt8186/mt8186-afe-pcm.c | 14 +++++++------- sound/soc/mediatek/mt8186/mt8186-mt6366.c | 2 +- sound/soc/mediatek/mt8188/mt8188-afe-pcm.c | 8 ++++---- sound/soc/mediatek/mt8188/mt8188-mt6359.c | 6 +++--- sound/soc/mediatek/mt8195/mt8195-afe-pcm.c | 10 +++++----- sound/soc/mediatek/mt8195/mt8195-mt6359.c | 4 ++-- sound/soc/meson/aiu-fifo.c | 2 +- sound/soc/meson/axg-fifo.c | 2 +- sound/soc/qcom/apq8016_sbc.c | 4 ++-- sound/soc/qcom/qdsp6/q6apm-dai.c | 2 +- sound/soc/qcom/sc7180.c | 10 +++++----- sound/soc/qcom/sc7280.c | 12 ++++++------ sound/soc/qcom/sc8280xp.c | 8 ++++---- sound/soc/qcom/sdw.c | 8 ++++---- sound/soc/qcom/sm8250.c | 10 +++++----- sound/soc/qcom/x1e80100.c | 8 ++++---- sound/soc/samsung/midas_wm1811.c | 2 +- sound/soc/sunxi/sun50i-dmic.c | 2 +- sound/soc/tegra/tegra_asoc_machine.c | 2 +- sound/soc/tegra/tegra_pcm.c | 6 +++--- sound/soc/ti/omap-hdmi.c | 2 +- 35 files changed, 82 insertions(+), 82 deletions(-) --- base-commit: 82415cf72c7e224be7a6496f3a53c0b365c2fe9d change-id: 20240430-asoc-snd-substream-clean-924b717d8f54 Best regards, -- Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org>

3 15