- Alsa-devel - mailman.alsa-project.org

ucm2: Qualcomm: x1e80100: add recording via DMIC01
by GitHub pull_request - opened 08 May '24

08 May '24

alsa-project/alsa-ucm-conf pull request #414 was opened from krzk: Add support for Digital Microphones DMIC01 on Qualcomm X1E80100 CRD board. Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/414 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/414.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH] ALSA: hda: cs35l56: Fix lifetime of cs_dsp instance
by Richard Fitzgerald 08 May '24

08 May '24

The cs_dsp instance is initialized in the driver probe() so it should be freed in the driver remove(). Also fix a missing call to cs_dsp_remove() in the error path of cs35l56_hda_common_probe(). The call to cs_dsp_remove() was being done in the component unbind callback cs35l56_hda_unbind(). This meant that if the driver was unbound and then re-bound it would be using an uninitialized cs_dsp instance. It is best to initialize the cs_dsp instance in probe() so that it can return an error if it fails. The component binding API doesn't have any error handling so there's no way to handle a failure if cs_dsp was initialized in the bind. Signed-off-by: Richard Fitzgerald <rf(a)opensource.cirrus.com> Fixes: 73cfbfa9caea ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier") --- sound/pci/hda/cs35l56_hda.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/sound/pci/hda/cs35l56_hda.c b/sound/pci/hda/cs35l56_hda.c index 558c1f38fe97..11b0570ff56d 100644 --- a/sound/pci/hda/cs35l56_hda.c +++ b/sound/pci/hda/cs35l56_hda.c @@ -732,8 +732,6 @@ static void cs35l56_hda_unbind(struct device *dev, struct device *master, void * if (cs35l56->base.fw_patched) cs_dsp_power_down(&cs35l56->cs_dsp); - cs_dsp_remove(&cs35l56->cs_dsp); - if (comps[cs35l56->index].dev == dev) memset(&comps[cs35l56->index], 0, sizeof(*comps)); @@ -1035,7 +1033,7 @@ int cs35l56_hda_common_probe(struct cs35l56_hda *cs35l56, int hid, int id) ARRAY_SIZE(cs35l56_hda_dai_config)); ret = cs35l56_force_sync_asp1_registers_from_cache(&cs35l56->base); if (ret) - goto err; + goto dsp_err; /* * By default only enable one ASP1TXn, where n=amplifier index, @@ -1061,6 +1059,8 @@ int cs35l56_hda_common_probe(struct cs35l56_hda *cs35l56, int hid, int id) pm_err: pm_runtime_disable(cs35l56->base.dev); +dsp_err: + cs_dsp_remove(&cs35l56->cs_dsp); err: gpiod_set_value_cansleep(cs35l56->base.reset_gpio, 0); @@ -1078,6 +1078,8 @@ void cs35l56_hda_remove(struct device *dev) component_del(cs35l56->base.dev, &cs35l56_hda_comp_ops); + cs_dsp_remove(&cs35l56->cs_dsp); + kfree(cs35l56->system_name); pm_runtime_put_noidle(cs35l56->base.dev); -- 2.39.2

2 1

[PATCH] ALSA: hda: hda_component: Initialize shared data during bind callback
by Richard Fitzgerald 08 May '24

08 May '24

Move the initialization of the shared struct hda_component array into hda_component_manager_bind(). The purpose of the manager bind() callback is to allow it to perform initialization before binding in the component drivers. This is the correct place to initialize the shared data. The original implementation initialized the shared data in hda_component_manager_init(). This is only done once during probe() of the manager driver. So if the component binding was unbound and then rebound, the shared data would not be re-initialized. Signed-off-by: Richard Fitzgerald <rf(a)opensource.cirrus.com> Fixes: fd895a74dc1d ("ALSA: hda: realtek: Move hda_component implementation to module") --- sound/pci/hda/hda_component.c | 16 +++++++++++++++- sound/pci/hda/hda_component.h | 7 ++----- sound/pci/hda/patch_realtek.c | 2 +- 3 files changed, 18 insertions(+), 7 deletions(-) diff --git a/sound/pci/hda/hda_component.c b/sound/pci/hda/hda_component.c index cd299d7d84ba..d02589014a3f 100644 --- a/sound/pci/hda/hda_component.c +++ b/sound/pci/hda/hda_component.c @@ -123,6 +123,21 @@ static int hda_comp_match_dev_name(struct device *dev, void *data) return !strcmp(d + n, tmp); } +int hda_component_manager_bind(struct hda_codec *cdc, + struct hda_component *comps, int count) +{ + int i; + + /* Init shared data */ + for (i = 0; i < count; ++i) { + memset(&comps[i], 0, sizeof(comps[i])); + comps[i].codec = cdc; + } + + return component_bind_all(hda_codec_dev(cdc), comps); +} +EXPORT_SYMBOL_NS_GPL(hda_component_manager_bind, SND_HDA_SCODEC_COMPONENT); + int hda_component_manager_init(struct hda_codec *cdc, struct hda_component *comps, int count, const char *bus, const char *hid, @@ -143,7 +158,6 @@ int hda_component_manager_init(struct hda_codec *cdc, sm->hid = hid; sm->match_str = match_str; sm->index = i; - comps[i].codec = cdc; component_match_add(dev, &match, hda_comp_match_dev_name, sm); } diff --git a/sound/pci/hda/hda_component.h b/sound/pci/hda/hda_component.h index c80a66691b5d..c70b3de68ab2 100644 --- a/sound/pci/hda/hda_component.h +++ b/sound/pci/hda/hda_component.h @@ -75,11 +75,8 @@ int hda_component_manager_init(struct hda_codec *cdc, void hda_component_manager_free(struct hda_codec *cdc, const struct component_master_ops *ops); -static inline int hda_component_manager_bind(struct hda_codec *cdc, - struct hda_component *comps) -{ - return component_bind_all(hda_codec_dev(cdc), comps); -} +int hda_component_manager_bind(struct hda_codec *cdc, + struct hda_component *comps, int count); static inline void hda_component_manager_unbind(struct hda_codec *cdc, struct hda_component *comps) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 8c157158f1cb..8c39bbdc6c5e 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6785,7 +6785,7 @@ static int comp_bind(struct device *dev) struct alc_spec *spec = cdc->spec; int ret; - ret = hda_component_manager_bind(cdc, spec->comps); + ret = hda_component_manager_bind(cdc, spec->comps, ARRAY_SIZE(spec->comps)); if (ret) return ret; -- 2.39.2

2 1

[PATCH] ALSA: hda/cs_dsp_ctl: Use private_free for control cleanup
by Richard Fitzgerald 08 May '24

08 May '24

Use the control private_free callback to free the associated data block. This ensures that the memory won't leak, whatever way the control gets destroyed. The original implementation didn't actually remove the ALSA controls in hda_cs_dsp_control_remove(). It only freed the internal tracking structure. This meant it was possible to remove/unload the amp driver while leaving its ALSA controls still present in the soundcard. Obviously attempting to access them could cause segfaults or at least dereferencing stale pointers. Signed-off-by: Richard Fitzgerald <rf(a)opensource.cirrus.com> Fixes: 3233b978af23 ("ALSA: hda: hda_cs_dsp_ctl: Add Library to support CS_DSP ALSA controls") --- This replaces my earlier "keep it simple" attempt at cleanup. I decided that implementing private_free is the only sensible way to fix the cleanup. --- sound/pci/hda/hda_cs_dsp_ctl.c | 47 ++++++++++++++++++++++------------ 1 file changed, 31 insertions(+), 16 deletions(-) diff --git a/sound/pci/hda/hda_cs_dsp_ctl.c b/sound/pci/hda/hda_cs_dsp_ctl.c index 463ca06036bf..9db45d7c17e5 100644 --- a/sound/pci/hda/hda_cs_dsp_ctl.c +++ b/sound/pci/hda/hda_cs_dsp_ctl.c @@ -8,6 +8,7 @@ #include <linux/module.h> #include <sound/soc.h> +#include <linux/cleanup.h> #include <linux/firmware/cirrus/cs_dsp.h> #include <linux/firmware/cirrus/wmfw.h> #include "hda_cs_dsp_ctl.h" @@ -97,11 +98,23 @@ static unsigned int wmfw_convert_flags(unsigned int in) return out; } -static void hda_cs_dsp_add_kcontrol(struct hda_cs_dsp_coeff_ctl *ctl, const char *name) +static void hda_cs_dsp_free_kcontrol(struct snd_kcontrol *kctl) { + struct hda_cs_dsp_coeff_ctl *ctl = (struct hda_cs_dsp_coeff_ctl *)snd_kcontrol_chip(kctl); struct cs_dsp_coeff_ctl *cs_ctl = ctl->cs_ctl; + + /* NULL priv to prevent a double-free in hda_cs_dsp_control_remove() */ + cs_ctl->priv = NULL; + kfree(ctl); +} + +static void hda_cs_dsp_add_kcontrol(struct cs_dsp_coeff_ctl *cs_ctl, + const struct hda_cs_dsp_ctl_info *info, + const char *name) +{ struct snd_kcontrol_new kcontrol = {0}; struct snd_kcontrol *kctl; + struct hda_cs_dsp_coeff_ctl *ctl __free(kfree) = NULL; int ret = 0; if (cs_ctl->len > ADSP_MAX_STD_CTRL_SIZE) { @@ -110,6 +123,13 @@ static void hda_cs_dsp_add_kcontrol(struct hda_cs_dsp_coeff_ctl *ctl, const char return; } + ctl = kzalloc(sizeof(*ctl), GFP_KERNEL); + if (!ctl) + return; + + ctl->cs_ctl = cs_ctl; + ctl->card = info->card; + kcontrol.name = name; kcontrol.info = hda_cs_dsp_coeff_info; kcontrol.iface = SNDRV_CTL_ELEM_IFACE_MIXER; @@ -117,20 +137,22 @@ static void hda_cs_dsp_add_kcontrol(struct hda_cs_dsp_coeff_ctl *ctl, const char kcontrol.get = hda_cs_dsp_coeff_get; kcontrol.put = hda_cs_dsp_coeff_put; - /* Save ctl inside private_data, ctl is owned by cs_dsp, - * and will be freed when cs_dsp removes the control */ kctl = snd_ctl_new1(&kcontrol, (void *)ctl); if (!kctl) return; - ret = snd_ctl_add(ctl->card, kctl); + kctl->private_free = hda_cs_dsp_free_kcontrol; + ctl->kctl = kctl; + + /* snd_ctl_add() calls our private_free on error, which will kfree(ctl) */ + cs_ctl->priv = no_free_ptr(ctl); + ret = snd_ctl_add(info->card, kctl); if (ret) { dev_err(cs_ctl->dsp->dev, "Failed to add KControl %s = %d\n", kcontrol.name, ret); return; } dev_dbg(cs_ctl->dsp->dev, "Added KControl: %s\n", kcontrol.name); - ctl->kctl = kctl; } static void hda_cs_dsp_control_add(struct cs_dsp_coeff_ctl *cs_ctl, @@ -138,7 +160,6 @@ static void hda_cs_dsp_control_add(struct cs_dsp_coeff_ctl *cs_ctl, { struct cs_dsp *cs_dsp = cs_ctl->dsp; char name[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; - struct hda_cs_dsp_coeff_ctl *ctl; const char *region_name; int ret; @@ -163,15 +184,7 @@ static void hda_cs_dsp_control_add(struct cs_dsp_coeff_ctl *cs_ctl, " %.*s", cs_ctl->subname_len - skip, cs_ctl->subname + skip); } - ctl = kzalloc(sizeof(*ctl), GFP_KERNEL); - if (!ctl) - return; - - ctl->cs_ctl = cs_ctl; - ctl->card = info->card; - cs_ctl->priv = ctl; - - hda_cs_dsp_add_kcontrol(ctl, name); + hda_cs_dsp_add_kcontrol(cs_ctl, info, name); } void hda_cs_dsp_add_controls(struct cs_dsp *dsp, const struct hda_cs_dsp_ctl_info *info) @@ -203,7 +216,9 @@ void hda_cs_dsp_control_remove(struct cs_dsp_coeff_ctl *cs_ctl) { struct hda_cs_dsp_coeff_ctl *ctl = cs_ctl->priv; - kfree(ctl); + /* ctl and kctl may already have been removed by ALSA private_free */ + if (ctl && ctl->kctl) + snd_ctl_remove(ctl->card, ctl->kctl); } EXPORT_SYMBOL_NS_GPL(hda_cs_dsp_control_remove, SND_HDA_CS_DSP_CONTROLS); -- 2.39.2

2 1

[PATCH v1 1/1] ASoC: atmel: tse850-pcm5142: Remove unused of_gpio.h
by Andy Shevchenko 08 May '24

08 May '24

of_gpio.h is deprecated and subject to remove. The driver doesn't use it, simply remove the unused header. Signed-off-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> --- sound/soc/atmel/tse850-pcm5142.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/sound/soc/atmel/tse850-pcm5142.c b/sound/soc/atmel/tse850-pcm5142.c index 611da23325d3..5d208e0b4b90 100644 --- a/sound/soc/atmel/tse850-pcm5142.c +++ b/sound/soc/atmel/tse850-pcm5142.c @@ -35,10 +35,9 @@ // of the (filtered) output from the PCM5142 codec. #include <linux/clk.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/module.h> #include <linux/of.h> -#include <linux/of_gpio.h> #include <linux/regulator/consumer.h> #include <sound/soc.h> -- 2.43.0.rc1.1336.g36b5255a03ac

2 1

[PATCH v2 0/4] ASoC: qcom: x1e80100: Correct channel mapping
by Krzysztof Kozlowski 08 May '24

08 May '24

Hi, First patch is a build dependency. Changes in v2: - Re-work most of the idea according to Srini comments: set channel mapping for backend DAIs, not frontend. - Patch #1: no changes - Patch #2 is entirely replaced - now channel mapping is implemented in q6apm-lpass-dais. - Patch #3: rework to new approach, but most of the code stays. - Patch #4: rework significantly, because only backend DAIs is now affected. - Link to v1: https://lore.kernel.org/r/20240507-asoc-x1e80100-4-channel-mapping-v1-0-b12… Description =========== X1E80100 CRD is the first board, which comes with four speakers, so we still keep fixing and adding missing pieces. The board has speaker arranged as left front+back and then right front+back. Using default channel mapping causes front right speaker to play left back stream. Adjust the channel maps for frontend DAIs to fix stereo and four-channel playback. Best regards, Krzysztof --- Krzysztof Kozlowski (4): ASoC: Constify channel mapping array arguments in set_channel_map() ASoC: qcom: q6apm-lpass-dais: Implement proper channel mapping ASoC: qcom: qdsp6: Set channel mapping instead of fixed defaults ASoC: qcom: x1e80100: Correct channel mapping include/sound/cs35l41.h | 4 ++-- include/sound/soc-dai.h | 8 ++++---- sound/soc/codecs/adau7118.c | 6 ++++-- sound/soc/codecs/cs35l41-lib.c | 4 ++-- sound/soc/codecs/cs35l41.c | 3 ++- sound/soc/codecs/max98504.c | 6 ++++-- sound/soc/codecs/wcd9335.c | 6 ++++-- sound/soc/codecs/wcd934x.c | 6 ++++-- sound/soc/qcom/qdsp6/audioreach.c | 30 +++++++----------------------- sound/soc/qcom/qdsp6/audioreach.h | 2 +- sound/soc/qcom/qdsp6/q6afe-dai.c | 16 ++++++++++------ sound/soc/qcom/qdsp6/q6apm-dai.c | 2 ++ sound/soc/qcom/qdsp6/q6apm-lpass-dais.c | 21 +++++++++++++-------- sound/soc/qcom/x1e80100.c | 18 ++++++++++++++++++ sound/soc/soc-dai.c | 4 ++-- 15 files changed, 79 insertions(+), 57 deletions(-) --- base-commit: 2b84edefcad14934796fad37b16512b6a2ca467e change-id: 20240507-asoc-x1e80100-4-channel-mapping-ea5f02b9e678 Best regards, -- Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org>

1 5

[PATCH v1] ALSA: hda/realtek: Add support for ASUS Zenbook 2024 HN7306W
by Stefan Binding 08 May '24

08 May '24

This laptop uses CS35L41 HDA with 2 amps using I2C and Internal Boost. Signed-off-by: Stefan Binding <sbinding(a)opensource.cirrus.com> --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 8502b30d5d5d..8c157158f1cb 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -10276,6 +10276,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1e63, "ASUS H7606W", ALC285_FIXUP_CS35L56_I2C_2), SND_PCI_QUIRK(0x1043, 0x1e83, "ASUS GA605W", ALC285_FIXUP_CS35L56_I2C_2), SND_PCI_QUIRK(0x1043, 0x1e8e, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA401), + SND_PCI_QUIRK(0x1043, 0x1ed3, "ASUS HN7306W", ALC287_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x1043, 0x1ee2, "ASUS UM6702RA/RC", ALC287_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x1043, 0x1c52, "ASUS Zephyrus G15 2022", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x1f11, "ASUS Zephyrus G14", ALC289_FIXUP_ASUS_GA401), -- 2.34.1

2 1

[PATCH 0/4] ASoC: Constify static snd_pcm_hardware
by Krzysztof Kozlowski 08 May '24

08 May '24

No dependencies. Static 'struct snd_pcm_hardware' is not modified by few drivers and its copy is passed to the core, so it can be made const for increased code safety. Best regards, Krzysztof --- Krzysztof Kozlowski (4): ASoC: qcom: Constify static snd_pcm_hardware ASoC: fsl: Constify static snd_pcm_hardware ASoC: meson: Constify static snd_pcm_hardware ASoC: uniphier: Constify static snd_pcm_hardware sound/soc/fsl/imx-pcm-rpmsg.c | 2 +- sound/soc/meson/aiu-fifo-i2s.c | 2 +- sound/soc/meson/aiu-fifo-spdif.c | 2 +- sound/soc/meson/aiu-fifo.h | 2 +- sound/soc/meson/axg-fifo.c | 2 +- sound/soc/qcom/qdsp6/q6apm-dai.c | 4 ++-- sound/soc/qcom/qdsp6/q6asm-dai.c | 2 +- sound/soc/uniphier/aio-dma.c | 2 +- 8 files changed, 9 insertions(+), 9 deletions(-) --- base-commit: ebbaba914053d8bcadd7d64eb8d2555299509a27 change-id: 20240429-n-asoc-const-snd-pcm-hardware-f0a5ade885ca Best regards, -- Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org>

2 5

[PATCH AUTOSEL 6.1 01/25] ASoC: Intel: bytcr_rt5640: Apply Asus T100TA quirk to Asus T100TAM too
by Sasha Levin 08 May '24

08 May '24

From: Hans de Goede <hdegoede(a)redhat.com> [ Upstream commit e50729d742ec364895f1c389c32315984a987aa5 ] The Asus T100TA quirk has been using an exact match on a product-name of "T100TA" but there are also T100TAM variants with a slightly higher clocked CPU and a metal backside which need the same quirk. Sort the existing T100TA (stereo speakers) below the more specific T100TAF (mono speaker) quirk and switch from exact matching to substring matching so that the T100TA quirk will also match on the T100TAM models. Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Link: https://msgid.link/r/20240407191559.21596-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/intel/boards/bytcr_rt5640.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index 094445036c20f..d6ef8e850412b 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -636,28 +636,30 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { BYT_RT5640_USE_AMCR0F28), }, { + /* Asus T100TAF, unlike other T100TA* models this one has a mono speaker */ .matches = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), - DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TA"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TAF"), }, .driver_data = (void *)(BYT_RT5640_IN1_MAP | BYT_RT5640_JD_SRC_JD2_IN4N | BYT_RT5640_OVCD_TH_2000UA | BYT_RT5640_OVCD_SF_0P75 | + BYT_RT5640_MONO_SPEAKER | + BYT_RT5640_DIFF_MIC | + BYT_RT5640_SSP0_AIF2 | BYT_RT5640_MCLK_EN), }, { + /* Asus T100TA and T100TAM, must come after T100TAF (mono spk) match */ .matches = { - DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), - DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TAF"), + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "T100TA"), }, .driver_data = (void *)(BYT_RT5640_IN1_MAP | BYT_RT5640_JD_SRC_JD2_IN4N | BYT_RT5640_OVCD_TH_2000UA | BYT_RT5640_OVCD_SF_0P75 | - BYT_RT5640_MONO_SPEAKER | - BYT_RT5640_DIFF_MIC | - BYT_RT5640_SSP0_AIF2 | BYT_RT5640_MCLK_EN), }, { -- 2.43.0

1 0

[PATCH AUTOSEL 6.6 01/43] ASoC: Intel: bytcr_rt5640: Apply Asus T100TA quirk to Asus T100TAM too
by Sasha Levin 08 May '24

08 May '24

From: Hans de Goede <hdegoede(a)redhat.com> [ Upstream commit e50729d742ec364895f1c389c32315984a987aa5 ] The Asus T100TA quirk has been using an exact match on a product-name of "T100TA" but there are also T100TAM variants with a slightly higher clocked CPU and a metal backside which need the same quirk. Sort the existing T100TA (stereo speakers) below the more specific T100TAF (mono speaker) quirk and switch from exact matching to substring matching so that the T100TA quirk will also match on the T100TAM models. Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Link: https://msgid.link/r/20240407191559.21596-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/intel/boards/bytcr_rt5640.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index e609249cc38d5..651408c6f399d 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -636,28 +636,30 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { BYT_RT5640_USE_AMCR0F28), }, { + /* Asus T100TAF, unlike other T100TA* models this one has a mono speaker */ .matches = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), - DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TA"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TAF"), }, .driver_data = (void *)(BYT_RT5640_IN1_MAP | BYT_RT5640_JD_SRC_JD2_IN4N | BYT_RT5640_OVCD_TH_2000UA | BYT_RT5640_OVCD_SF_0P75 | + BYT_RT5640_MONO_SPEAKER | + BYT_RT5640_DIFF_MIC | + BYT_RT5640_SSP0_AIF2 | BYT_RT5640_MCLK_EN), }, { + /* Asus T100TA and T100TAM, must come after T100TAF (mono spk) match */ .matches = { - DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), - DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TAF"), + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "T100TA"), }, .driver_data = (void *)(BYT_RT5640_IN1_MAP | BYT_RT5640_JD_SRC_JD2_IN4N | BYT_RT5640_OVCD_TH_2000UA | BYT_RT5640_OVCD_SF_0P75 | - BYT_RT5640_MONO_SPEAKER | - BYT_RT5640_DIFF_MIC | - BYT_RT5640_SSP0_AIF2 | BYT_RT5640_MCLK_EN), }, { -- 2.43.0

1 2