- Alsa-devel - mailman.alsa-project.org

[PATCH v2] ASoC: rt1318: Add RT1318 audio amplifier driver
by Jack Yu 20 Jun '24

20 Jun '24

This is the initial i2s-based amplifier driver for rt1318. Signed-off-by: Jack Yu <jack.yu(a)realtek.com> --- include/sound/rt1318.h | 16 + sound/soc/codecs/Kconfig | 5 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/rt1318.c | 1347 +++++++++++++++++++++++++++++++++++++ sound/soc/codecs/rt1318.h | 342 ++++++++++ 5 files changed, 1712 insertions(+) create mode 100644 include/sound/rt1318.h create mode 100644 sound/soc/codecs/rt1318.c create mode 100644 sound/soc/codecs/rt1318.h diff --git a/include/sound/rt1318.h b/include/sound/rt1318.h new file mode 100644 index 000000000000..fe6bff06036c --- /dev/null +++ b/include/sound/rt1318.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * linux/sound/rt1318.h -- Platform data for RT1318 + * + * Copyright 2024 Realtek Semiconductor Corp. + */ + +#ifndef __LINUX_SND_RT1318_H +#define __LINUX_SND_RT1318_H + +struct rt1318_platform_data { + unsigned int init_r0_l; + unsigned int init_r0_r; +}; + +#endif diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 4afc43d3f71f..d846bfbeeb79 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -221,6 +221,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_RT722_SDCA_SDW imply SND_SOC_RT1308_SDW imply SND_SOC_RT1316_SDW + imply SND_SOC_RT1318 imply SND_SOC_RT1318_SDW imply SND_SOC_RT9120 imply SND_SOC_RTQ9128 @@ -1570,6 +1571,10 @@ config SND_SOC_RT1316_SDW depends on SOUNDWIRE select REGMAP_SOUNDWIRE +config SND_SOC_RT1318 + tristate + depends on I2C + config SND_SOC_RT1318_SDW tristate "Realtek RT1318 Codec - SDW" depends on SOUNDWIRE diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index b4df22186e25..c5efae0aac72 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -221,6 +221,7 @@ snd-soc-rt1305-y := rt1305.o snd-soc-rt1308-y := rt1308.o snd-soc-rt1308-sdw-y := rt1308-sdw.o snd-soc-rt1316-sdw-y := rt1316-sdw.o +snd-soc-rt1318-y := rt1318.o snd-soc-rt1318-sdw-y := rt1318-sdw.o snd-soc-rt274-y := rt274.o snd-soc-rt286-y := rt286.o @@ -613,6 +614,7 @@ obj-$(CONFIG_SND_SOC_RT1305) += snd-soc-rt1305.o obj-$(CONFIG_SND_SOC_RT1308) += snd-soc-rt1308.o obj-$(CONFIG_SND_SOC_RT1308_SDW) += snd-soc-rt1308-sdw.o obj-$(CONFIG_SND_SOC_RT1316_SDW) += snd-soc-rt1316-sdw.o +obj-$(CONFIG_SND_SOC_RT1318) += snd-soc-rt1318.o obj-$(CONFIG_SND_SOC_RT1318_SDW) += snd-soc-rt1318-sdw.o obj-$(CONFIG_SND_SOC_RT274) += snd-soc-rt274.o obj-$(CONFIG_SND_SOC_RT286) += snd-soc-rt286.o diff --git a/sound/soc/codecs/rt1318.c b/sound/soc/codecs/rt1318.c new file mode 100644 index 000000000000..ee4d11e05dae --- /dev/null +++ b/sound/soc/codecs/rt1318.c @@ -0,0 +1,1347 @@ +// SPDX-License-Identifier: GPL-2.0-only +// +// rt1318.c -- RT1318 ALSA SoC audio amplifier driver +// Author: Jack Yu <jack.yu(a)realtek.com> +// +// Copyright(c) 2024 Realtek Semiconductor Corp. +// +// + +#include <linux/acpi.h> +#include <linux/fs.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/regmap.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/firmware.h> +#include <linux/gpio.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/initval.h> +#include <sound/tlv.h> +#include <sound/rt1318.h> + +#include "rt1318.h" + +static struct reg_sequence init_list[] = { + { 0x0000C000, 0x01}, + { 0x0000F20D, 0x00}, + { 0x0000F212, 0x3E}, + { 0x0000C001, 0x02}, + { 0x0000C003, 0x22}, + { 0x0000C004, 0x44}, + { 0x0000C005, 0x44}, + { 0x0000C007, 0x64}, + { 0x0000C00E, 0xE7}, + { 0x0000F223, 0x7F}, + { 0x0000F224, 0xDB}, + { 0x0000F225, 0xEE}, + { 0x0000F226, 0x3F}, + { 0x0000F227, 0x0F}, + { 0x0000F21A, 0x78}, + { 0x0000F242, 0x3C}, + { 0x0000C120, 0x40}, + { 0x0000C125, 0x03}, + { 0x0000C321, 0x0A}, + { 0x0000C200, 0xD8}, + { 0x0000C201, 0x27}, + { 0x0000C202, 0x0F}, + { 0x0000C400, 0x0E}, + { 0x0000C401, 0x43}, + { 0x0000C402, 0xE0}, + { 0x0000C403, 0x00}, + { 0x0000C404, 0x4C}, + { 0x0000C406, 0x40}, + { 0x0000C407, 0x02}, + { 0x0000C408, 0x3F}, + { 0x0000C300, 0x01}, + { 0x0000C125, 0x03}, + { 0x0000DF00, 0x10}, + { 0x0000F20B, 0x2A}, + { 0x0000DF5F, 0x01}, + { 0x0000DF60, 0xA7}, + { 0x0000C203, 0x84}, + { 0x0000C206, 0x78}, + { 0x0000F10A, 0x09}, + { 0x0000F10B, 0x4C}, + { 0x0000F104, 0xF4}, + { 0x0000F105, 0x03}, + { 0x0000F109, 0xE0}, + { 0x0000F10B, 0x5C}, + { 0x0000F104, 0xF4}, + { 0x0000F105, 0x04}, + { 0x0000F109, 0x65}, + { 0x0000F10B, 0x5C}, + { 0x0000F104, 0xF4}, + { 0x0000F105, 0x02}, + { 0x0000F109, 0x30}, + { 0x0000F10B, 0x5C}, + { 0x0000E706, 0x0F}, + { 0x0000E707, 0x30}, + { 0x0000E806, 0x0F}, + { 0x0000E807, 0x30}, + { 0x0000CE04, 0x03}, + { 0x0000CE05, 0x5F}, + { 0x0000CE06, 0xA2}, + { 0x0000CE07, 0x6B}, + { 0x0000CF04, 0x03}, + { 0x0000CF05, 0x5F}, + { 0x0000CF06, 0xA2}, + { 0x0000CF07, 0x6B}, + { 0x0000CE60, 0xE3}, + { 0x0000C130, 0x51}, + { 0x0000E000, 0xA8}, + { 0x0000F102, 0x00}, + { 0x0000F103, 0x00}, + { 0x0000F104, 0xF5}, + { 0x0000F105, 0x23}, + { 0x0000F109, 0x04}, + { 0x0000F10A, 0x0B}, + { 0x0000F10B, 0x4C}, + { 0x0000F10B, 0x5C}, + { 0x41001888, 0x00}, + { 0x0000C121, 0x0B}, + { 0x0000F102, 0x00}, + { 0x0000F103, 0x00}, + { 0x0000F104, 0xF5}, + { 0x0000F105, 0x23}, + { 0x0000F109, 0x00}, + { 0x0000F10A, 0x0B}, + { 0x0000F10B, 0x4C}, + { 0x0000F10B, 0x5C}, + { 0x0000F800, 0x20}, + { 0x0000CA00, 0x80}, + { 0x0000CA10, 0x00}, + { 0x0000CA02, 0x78}, + { 0x0000CA12, 0x78}, + { 0x0000ED00, 0x90}, + { 0x0000E604, 0x00}, + { 0x0000DB00, 0x0C}, + { 0x0000DD00, 0x0C}, + { 0x0000DC19, 0x00}, + { 0x0000DC1A, 0x6A}, + { 0x0000DC1B, 0xAA}, + { 0x0000DC1C, 0xAB}, + { 0x0000DC1D, 0x00}, + { 0x0000DC1E, 0x16}, + { 0x0000DC1F, 0xDB}, + { 0x0000DC20, 0x6D}, + { 0x0000DE19, 0x00}, + { 0x0000DE1A, 0x6A}, + { 0x0000DE1B, 0xAA}, + { 0x0000DE1C, 0xAB}, + { 0x0000DE1D, 0x00}, + { 0x0000DE1E, 0x16}, + { 0x0000DE1F, 0xDB}, + { 0x0000DE20, 0x6D}, + { 0x0000DB32, 0x00}, + { 0x0000DD32, 0x00}, + { 0x0000DB33, 0x0A}, + { 0x0000DD33, 0x0A}, + { 0x0000DB34, 0x1A}, + { 0x0000DD34, 0x1A}, + { 0x0000DB15, 0xEF}, + { 0x0000DD15, 0xEF}, + { 0x0000DB17, 0xEF}, + { 0x0000DD17, 0xEF}, + { 0x0000DB94, 0x70}, + { 0x0000DD94, 0x70}, + { 0x0000DB19, 0x40}, + { 0x0000DD19, 0x40}, + { 0x0000DB12, 0xC0}, + { 0x0000DD12, 0xC0}, + { 0x0000DB00, 0x4C}, + { 0x0000DB04, 0x05}, + { 0x0000DB05, 0x03}, + { 0x0000DD04, 0x05}, + { 0x0000DD05, 0x03}, + { 0x0000DBBB, 0x09}, + { 0x0000DBBC, 0x30}, + { 0x0000DBBD, 0xF0}, + { 0x0000DBBE, 0xF1}, + { 0x0000DDBB, 0x09}, + { 0x0000DDBC, 0x30}, + { 0x0000DDBD, 0xF0}, + { 0x0000DDBE, 0xF1}, + { 0x0000DB01, 0x79}, + { 0x0000DD01, 0x79}, + { 0x0000DB08, 0x40}, + { 0x0000DD08, 0x40}, + { 0x0000DC52, 0xEF}, + { 0x0000DE52, 0xEF}, + { 0x0000DB00, 0xCC}, + { 0x0000CC2C, 0x00}, + { 0x0000CC2D, 0x2A}, + { 0x0000CC2E, 0x83}, + { 0x0000CC2F, 0xA8}, + { 0x0000CD2C, 0x00}, + { 0x0000CD2D, 0x2A}, + { 0x0000CD2E, 0x83}, + { 0x0000CD2F, 0xA8}, + { 0x0000CC24, 0x00}, + { 0x0000CC25, 0x51}, + { 0x0000CC26, 0xEB}, + { 0x0000CC27, 0x85}, + { 0x0000CD24, 0x00}, + { 0x0000CD25, 0x51}, + { 0x0000CD26, 0xEB}, + { 0x0000CD27, 0x85}, + { 0x0000CC20, 0x00}, + { 0x0000CC21, 0x00}, + { 0x0000CC22, 0x43}, + { 0x0000CD20, 0x00}, + { 0x0000CD21, 0x00}, + { 0x0000CD22, 0x43}, + { 0x0000CC16, 0x0F}, + { 0x0000CC17, 0x00}, + { 0x0000CD16, 0x0F}, + { 0x0000CD17, 0x00}, + { 0x0000CC29, 0x5D}, + { 0x0000CC2A, 0xC0}, + { 0x0000CD29, 0x5D}, + { 0x0000CD2A, 0xC0}, + { 0x0000CC31, 0x20}, + { 0x0000CC32, 0x00}, + { 0x0000CC33, 0x00}, + { 0x0000CC34, 0x00}, + { 0x0000CD31, 0x20}, + { 0x0000CD32, 0x00}, + { 0x0000CD33, 0x00}, + { 0x0000CD34, 0x00}, + { 0x0000CC36, 0x79}, + { 0x0000CC37, 0x99}, + { 0x0000CC38, 0x99}, + { 0x0000CC39, 0x99}, + { 0x0000CD36, 0x79}, + { 0x0000CD37, 0x99}, + { 0x0000CD38, 0x99}, + { 0x0000CD39, 0x99}, + { 0x0000CC09, 0x00}, + { 0x0000CC0A, 0x07}, + { 0x0000CC0B, 0x5F}, + { 0x0000CC0C, 0x6F}, + { 0x0000CD09, 0x00}, + { 0x0000CD0A, 0x07}, + { 0x0000CD0B, 0x5F}, + { 0x0000CD0C, 0x6F}, + { 0x0000CC0E, 0x00}, + { 0x0000CC0F, 0x03}, + { 0x0000CC10, 0xAF}, + { 0x0000CC11, 0xB7}, + { 0x0000CD0E, 0x00}, + { 0x0000CD0F, 0x03}, + { 0x0000CD10, 0xAF}, + { 0x0000CD11, 0xB7}, + { 0x0000CCD6, 0x00}, + { 0x0000CCD7, 0x03}, + { 0x0000CDD6, 0x00}, + { 0x0000CDD7, 0x03}, + { 0x0000CCD8, 0x00}, + { 0x0000CCD9, 0x03}, + { 0x0000CDD8, 0x00}, + { 0x0000CDD9, 0x03}, + { 0x0000CCDA, 0x00}, + { 0x0000CCDB, 0x03}, + { 0x0000CDDA, 0x00}, + { 0x0000CDDB, 0x03}, + { 0x0000C320, 0x20}, + { 0x0000C203, 0x9C}, +}; +#define rt1318_INIT_REG_LEN ARRAY_SIZE(init_list) + +static const struct reg_default rt1318_reg[] = { + { 0xc000, 0x00 }, + { 0xc001, 0x43 }, + { 0xc003, 0x22 }, + { 0xc004, 0x44 }, + { 0xc005, 0x44 }, + { 0xc006, 0x33 }, + { 0xc007, 0x64 }, + { 0xc008, 0x05 }, + { 0xc00a, 0xfc }, + { 0xc00b, 0x0f }, + { 0xc00c, 0x0e }, + { 0xc00d, 0xef }, + { 0xc00e, 0xe5 }, + { 0xc00f, 0xff }, + { 0xc120, 0xc0 }, + { 0xc121, 0x00 }, + { 0xc122, 0x00 }, + { 0xc123, 0x14 }, + { 0xc125, 0x00 }, + { 0xc130, 0x59 }, + { 0xc200, 0x00 }, + { 0xc201, 0x00 }, + { 0xc202, 0x00 }, + { 0xc203, 0x04 }, + { 0xc204, 0x00 }, + { 0xc205, 0x00 }, + { 0xc206, 0x68 }, + { 0xc207, 0x70 }, + { 0xc208, 0x00 }, + { 0xc20a, 0x00 }, + { 0xc20b, 0x01 }, + { 0xc20c, 0x7f }, + { 0xc20d, 0x01 }, + { 0xc20e, 0x7f }, + { 0xc300, 0x00 }, + { 0xc301, 0x00 }, + { 0xc303, 0x80 }, + { 0xc320, 0x00 }, + { 0xc321, 0x09 }, + { 0xc322, 0x02 }, + { 0xc400, 0x00 }, + { 0xc401, 0x00 }, + { 0xc402, 0x00 }, + { 0xc403, 0x00 }, + { 0xc404, 0x00 }, + { 0xc405, 0x00 }, + { 0xc406, 0x00 }, + { 0xc407, 0x00 }, + { 0xc408, 0x00 }, + { 0xc410, 0x04 }, + { 0xc430, 0x00 }, + { 0xc431, 0x00 }, + { 0xca00, 0x10 }, + { 0xca01, 0x00 }, + { 0xca02, 0x0b }, + { 0xca10, 0x10 }, + { 0xca11, 0x00 }, + { 0xca12, 0x0b }, + { 0xce04, 0x08 }, + { 0xce05, 0x00 }, + { 0xce06, 0x00 }, + { 0xce07, 0x00 }, + { 0xce60, 0x63 }, + { 0xcf04, 0x08 }, + { 0xcf05, 0x00 }, + { 0xcf06, 0x00 }, + { 0xcf07, 0x00 }, + { 0xdb00, 0x00 }, + { 0xdb08, 0x40 }, + { 0xdb12, 0x00 }, + { 0xdb35, 0x00 }, + { 0xdbb5, 0x00 }, + { 0xdbb6, 0x40 }, + { 0xdbb7, 0x00 }, + { 0xdbb8, 0x00 }, + { 0xdbc5, 0x00 }, + { 0xdbc6, 0x00 }, + { 0xdbc7, 0x00 }, + { 0xdbc8, 0x00 }, + { 0xdd08, 0x40 }, + { 0xdd12, 0x00 }, + { 0xdd35, 0x00 }, + { 0xddb5, 0x00 }, + { 0xddb6, 0x40 }, + { 0xddb7, 0x00 }, + { 0xddb8, 0x00 }, + { 0xddc5, 0x00 }, + { 0xddc6, 0x00 }, + { 0xddc7, 0x00 }, + { 0xddc8, 0x00 }, + { 0xdd93, 0x00 }, + { 0xdd94, 0x64 }, + { 0xdf00, 0x00 }, + { 0xdf5f, 0x00 }, + { 0xdf60, 0x00 }, + { 0xe000, 0x08 }, + { 0xe300, 0xa0 }, + { 0xe400, 0x22 }, + { 0xe706, 0x2f }, + { 0xe707, 0x2f }, + { 0xe806, 0x2f }, + { 0xe807, 0x2f }, + { 0xea00, 0x43 }, + { 0xed00, 0x80 }, + { 0xed01, 0x0f }, + { 0xed02, 0xff }, + { 0xed03, 0x00 }, + { 0xed04, 0x00 }, + { 0xed05, 0x0f }, + { 0xed06, 0xff }, + { 0xf010, 0x10 }, + { 0xf011, 0xec }, + { 0xf012, 0x68 }, + { 0xf013, 0x21 }, + { 0xf102, 0x00 }, + { 0xf103, 0x00 }, + { 0xf104, 0x00 }, + { 0xf105, 0x00 }, + { 0xf106, 0x00 }, + { 0xf107, 0x00 }, + { 0xf108, 0x00 }, + { 0xf109, 0x00 }, + { 0xf10a, 0x03 }, + { 0xf10b, 0x40 }, + { 0xf20b, 0x28 }, + { 0xf20d, 0x00 }, + { 0xf212, 0x00 }, + { 0xf21a, 0x00 }, + { 0xf223, 0x40 }, + { 0xf224, 0x00 }, + { 0xf225, 0x00 }, + { 0xf226, 0x00 }, + { 0xf227, 0x00 }, + { 0xf242, 0x0c }, + { 0xf800, 0x00 }, + { 0xf801, 0x12 }, + { 0xf802, 0xe0 }, + { 0xf803, 0x2f }, + { 0xf804, 0x00 }, + { 0xf805, 0x00 }, + { 0xf806, 0x07 }, + { 0xf807, 0xff }, +}; + +static bool rt1318_volatile_register(struct device *dev, unsigned int reg) +{ + switch (reg) { + case 0xc000: + case 0xc301: + case 0xc410: + case 0xc430 ... 0xc431: + case 0xdb06: + case 0xdb12: + case 0xdb1d ... 0xdb1f: + case 0xdb35: + case 0xdb37: + case 0xdb8a ... 0xdb92: + case 0xdbc5 ... 0xdbc8: + case 0xdc2b ... 0xdc49: + case 0xdd0b: + case 0xdd12: + case 0xdd1d ... 0xdd1f: + case 0xdd35: + case 0xdd8a ... 0xdd92: + case 0xddc5 ... 0xddc8: + case 0xde2b ... 0xde44: + case 0xdf4a ... 0xdf55: + case 0xe224 ... 0xe23b: + case 0xea01: + case 0xebc5: + case 0xebc8: + case 0xebcb ... 0xebcc: + case 0xed03 ... 0xed06: + case 0xf010 ... 0xf014: + return true; + + default: + return false; + } +} + +static bool rt1318_readable_register(struct device *dev, unsigned int reg) +{ + switch (reg) { + case 0xc000 ... 0xc00f: + case 0xc120 ... 0xc130: + case 0xc200 ... 0xc20e: + case 0xc300 ... 0xc303: + case 0xc320 ... 0xc322: + case 0xc400 ... 0xc408: + case 0xc430 ... 0xc431: + case 0xca00 ... 0xca02: + case 0xca10 ... 0xca12: + case 0xcb00 ... 0xcb0b: + case 0xcc00 ... 0xcce5: + case 0xcd00 ... 0xcde5: + case 0xce00 ... 0xce6a: + case 0xcf00 ... 0xcf53: + case 0xd000 ... 0xd0cc: + case 0xd100 ... 0xd1b9: + case 0xdb00 ... 0xdc53: + case 0xdd00 ... 0xde53: + case 0xdf00 ... 0xdf6b: + case 0xe000: + case 0xe300: + case 0xe400: + case 0xe706 ... 0xe707: + case 0xe806 ... 0xe807: + case 0xea00: + case 0xeb00 ... 0xebcc: + case 0xec00 ... 0xecb9: + case 0xed00 ... 0xed06: + case 0xf010 ... 0xf014: + case 0xf102 ... 0xf10b: + case 0xf20b: + case 0xf20d ... 0xf242: + case 0xf800 ... 0xf807: + return true; + default: + return false; + } +} + +static int rt1318_dac_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + regmap_update_bits(rt1318->regmap, RT1318_PWR_STA1, + RT1318_PDB_CTRL_MASK, RT1318_PDB_CTRL_HIGH); + break; + + case SND_SOC_DAPM_POST_PMD: + regmap_update_bits(rt1318->regmap, RT1318_PWR_STA1, + RT1318_PDB_CTRL_MASK, RT1318_PDB_CTRL_LOW); + break; + + default: + break; + } + return 0; +} + +static int rt1318_dvol_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + + rt1318->rt1318_dvol = ucontrol->value.integer.value[0]; + + if (rt1318->rt1318_dvol <= RT1318_DVOL_STEP && rt1318->rt1318_dvol >= 0) { + regmap_write(rt1318->regmap, RT1318_DA_VOL_L_8, + rt1318->rt1318_dvol >> 8); + regmap_write(rt1318->regmap, RT1318_DA_VOL_L_1_7, + rt1318->rt1318_dvol & 0xff); + regmap_write(rt1318->regmap, RT1318_DA_VOL_R_8, + rt1318->rt1318_dvol >> 8); + regmap_write(rt1318->regmap, RT1318_DA_VOL_R_1_7, + rt1318->rt1318_dvol & 0xff); + return 1; + } + + return 0; +} + +static int rt1318_dvol_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + + ucontrol->value.integer.value[0] = rt1318->rt1318_dvol; + + return 0; +} + +static const struct snd_kcontrol_new rt1318_snd_controls[] = { + SOC_SINGLE_EXT("Amp Playback Volume", SND_SOC_NOPM, 0, 383, 0, + rt1318_dvol_get, rt1318_dvol_put), +}; + +static const struct snd_soc_dapm_widget rt1318_dapm_widgets[] = { + /* Audio Interface */ + SND_SOC_DAPM_AIF_IN("AIF1RX", "AIF1 Playback", 0, SND_SOC_NOPM, 0, 0), + /* DACs */ + SND_SOC_DAPM_DAC_E("DAC", NULL, SND_SOC_NOPM, 0, 0, + rt1318_dac_event, SND_SOC_DAPM_PRE_PMU | + SND_SOC_DAPM_POST_PMD), + /* Output Lines */ + SND_SOC_DAPM_OUTPUT("Amp"), +}; + +static const struct snd_soc_dapm_route rt1318_dapm_routes[] = { + {"DAC", NULL, "AIF1RX"}, + {"Amp", NULL, "DAC"}, +}; + +static int rt1318_get_clk_info(int sclk, int rate) +{ + int i, pd[] = {1, 2, 4, 8, 16, 24}; + + if (sclk <= 0 || rate <= 0) + return -EINVAL; + + rate = rate << 8; + for (i = 0; i < ARRAY_SIZE(pd); i++) + if (sclk == rate * pd[i]) + return i; + + return -EINVAL; +} + +static int rt1318_clk_ip_info(struct snd_soc_component *component, int lrclk) +{ + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + + if (lrclk == RT1318_LRCLK_48000 || lrclk == RT1318_LRCLK_44100 || + lrclk == RT1318_LRCLK_16000) + regmap_update_bits(rt1318->regmap, RT1318_SRC_TCON, + RT1318_SRCIN_F12288_MASK | RT1318_SRCIN_DACLK_MASK, + RT1318_SRCIN_TCON4 | RT1318_DACLK_TCON4); + else if (lrclk == RT1318_LRCLK_96000) + regmap_update_bits(rt1318->regmap, RT1318_SRC_TCON, + RT1318_SRCIN_F12288_MASK | RT1318_SRCIN_DACLK_MASK, + RT1318_SRCIN_TCON4 | RT1318_DACLK_TCON2); + else if (lrclk == RT1318_LRCLK_192000) + regmap_update_bits(rt1318->regmap, RT1318_SRC_TCON, + RT1318_SRCIN_F12288_MASK | RT1318_SRCIN_DACLK_MASK, + RT1318_SRCIN_TCON4 | RT1318_DACLK_TCON1); + else + return -EINVAL; + + return 0; +} + +static int rt1318_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + int data_len = 0, ch_len = 0; + int pre_div, ret; + + rt1318->lrck = params_rate(params); + pre_div = rt1318_get_clk_info(rt1318->sysclk, rt1318->lrck); + if (pre_div < 0) { + dev_err(component->dev, "Unsupported clock setting\n"); + return -EINVAL; + } + ret = rt1318_clk_ip_info(component, rt1318->lrck); + if (ret < 0) { + dev_err(component->dev, "Unsupported clock setting\n"); + return -EINVAL; + } + + switch (params_width(params)) { + case 16: + break; + case 20: + data_len = RT1318_I2S_DL_20; + ch_len = RT1318_I2S_DL_20; + break; + case 24: + data_len = RT1318_I2S_DL_24; + ch_len = RT1318_I2S_DL_24; + break; + case 32: + data_len = RT1318_I2S_DL_32; + ch_len = RT1318_I2S_DL_32; + break; + case 8: + data_len = RT1318_I2S_DL_8; + ch_len = RT1318_I2S_DL_8; + break; + default: + return -EINVAL; + } + + regmap_update_bits(rt1318->regmap, RT1318_CLK2, + RT1318_DIV_AP_MASK | RT1318_DIV_DAMOD_MASK, + pre_div << RT1318_DIV_AP_SFT | + pre_div << RT1318_DIV_DAMOD_SFT); + regmap_update_bits(rt1318->regmap, RT1318_CLK3, + RT1318_AD_STO1_MASK | RT1318_AD_STO2_MASK, + pre_div << RT1318_AD_STO1_SFT | + pre_div << RT1318_AD_STO2_SFT); + regmap_update_bits(rt1318->regmap, RT1318_CLK4, + RT1318_AD_ANA_STO1_MASK | RT1318_AD_ANA_STO2_MASK, + pre_div << RT1318_AD_ANA_STO1_SFT | + pre_div << RT1318_AD_ANA_STO2_SFT); + regmap_update_bits(rt1318->regmap, RT1318_CLK5, + RT1318_DIV_FIFO_IN_MASK | RT1318_DIV_FIFO_OUT_MASK, + pre_div << RT1318_DIV_FIFO_IN_SFT | + pre_div << RT1318_DIV_FIFO_OUT_SFT); + regmap_update_bits(rt1318->regmap, RT1318_CLK6, + RT1318_DIV_NLMS_MASK | RT1318_DIV_AD_MONO_MASK | + RT1318_DIV_POST_G_MASK, pre_div << RT1318_DIV_NLMS_SFT | + pre_div << RT1318_DIV_AD_MONO_SFT | + pre_div << RT1318_DIV_POST_G_SFT); + + regmap_update_bits(rt1318->regmap, RT1318_TDM_CTRL2, + RT1318_I2S_DL_MASK, data_len << RT1318_I2S_DL_SFT); + regmap_update_bits(rt1318->regmap, RT1318_TDM_CTRL3, + RT1318_I2S_TX_CHL_MASK | RT1318_I2S_RX_CHL_MASK, + ch_len << RT1318_I2S_TX_CHL_SFT | + ch_len << RT1318_I2S_RX_CHL_SFT); + + return 0; +} + +static int rt1318_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt) +{ + struct snd_soc_component *component = dai->component; + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + unsigned int reg_val = 0, reg_val2 = 0; + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_NF: + reg_val2 |= RT1318_TDM_BCLK_INV; + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + break; + + case SND_SOC_DAIFMT_LEFT_J: + reg_val |= RT1318_FMT_LEFT_J; + break; + + case SND_SOC_DAIFMT_DSP_A: + reg_val |= RT1318_FMT_PCM_A_R; + break; + + case SND_SOC_DAIFMT_DSP_B: + reg_val |= RT1318_FMT_PCM_B_R; + break; + + default: + return -EINVAL; + } + + regmap_update_bits(rt1318->regmap, RT1318_TDM_CTRL1, + RT1318_I2S_FMT_MASK, reg_val); + regmap_update_bits(rt1318->regmap, RT1318_TDM_CTRL1, + RT1318_TDM_BCLK_MASK, reg_val2); + + return 0; +} + +static int rt1318_set_dai_sysclk(struct snd_soc_dai *dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_component *component = dai->component; + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + int reg_val = 0; + + if (freq == rt1318->sysclk && clk_id == rt1318->sysclk_src) + return 0; + + switch (clk_id) { + case RT1318_SCLK_S_BCLK: + reg_val |= RT1318_SYSCLK_BCLK; + break; + case RT1318_SCLK_S_SDW: + reg_val |= RT1318_SYSCLK_SDW; + break; + case RT1318_SCLK_S_PLL2F: + reg_val |= RT1318_SYSCLK_PLL2F; + break; + case RT1318_SCLK_S_PLL2B: + reg_val |= RT1318_SYSCLK_PLL2B; + break; + case RT1318_SCLK_S_MCLK: + reg_val |= RT1318_SYSCLK_MCLK; + break; + case RT1318_SCLK_S_RC0: + reg_val |= RT1318_SYSCLK_RC1; + break; + case RT1318_SCLK_S_RC1: + reg_val |= RT1318_SYSCLK_RC2; + break; + case RT1318_SCLK_S_RC2: + reg_val |= RT1318_SYSCLK_RC3; + break; + default: + dev_err(component->dev, "Invalid clock id (%d)\n", clk_id); + return -EINVAL; + } + + rt1318->sysclk = freq; + rt1318->sysclk_src = clk_id; + dev_dbg(dai->dev, "Sysclk is %dHz and clock id is %d\n", freq, clk_id); + regmap_update_bits(rt1318->regmap, RT1318_CLK1, + RT1318_SYSCLK_SEL_MASK, reg_val); + + return 0; +} + +static const struct pll_calc_map pll_preset_table[] = { + {512000, 4096000, 22, 190, 0, true, false}, + {1024000, 4096000, 22, 94, 0, true, false}, + {1024000, 16384000, 4, 190, 0, true, false}, + {1411200, 11289600, 6, 62, 0, true, false}, + {1536000, 12288000, 6, 62, 0, true, false}, + {2822400, 11289600, 6, 62, 0, true, false}, + {2822400, 45158400, 0, 62, 0, true, false}, + {2822400, 49152000, 0, 62, 0, true, false}, + {3072000, 12288000, 6, 62, 0, true, false}, + {3072000, 24576000, 2, 62, 0, true, false}, + {3072000, 49152000, 0, 62, 0, true, false}, + {6144000, 24576000, 2, 94, 4, false, false}, + {6144000, 49152000, 0, 30, 0, true, false}, + {6144000, 98304000, 0, 94, 4, false, true}, + {12288000, 49152000, 0, 62, 6, false, false}, +}; + +int rt1318_pll_calc(const unsigned int freq_in, + const unsigned int freq_out, struct rt1318_pll_code *pll_code) +{ + int max_n = RT1318_PLL_N_MAX, max_m = RT1318_PLL_M_MAX; + int i, k, red, n_t, pll_out, in_t, out_t; + int n = 0, m = 0, m_t = 0; + int red_t = abs(freq_out - freq_in); + bool m_bypass = false, k_bypass = false; + + if (RT1318_PLL_INP_MAX < freq_in || RT1318_PLL_INP_MIN > freq_in) + return -EINVAL; + + for (i = 0; i < ARRAY_SIZE(pll_preset_table); i++) { + if (freq_in == pll_preset_table[i].pll_in && + freq_out == pll_preset_table[i].pll_out) { + k = pll_preset_table[i].k; + m = pll_preset_table[i].m; + n = pll_preset_table[i].n; + m_bypass = pll_preset_table[i].m_bp; + k_bypass = pll_preset_table[i].k_bp; + goto code_find; + } + } + + k = 100000000 / freq_out - 2; + if (k > RT1318_PLL_K_MAX) + k = RT1318_PLL_K_MAX; + if (k < 0) { + k = 0; + k_bypass = true; + } + for (n_t = 0; n_t <= max_n; n_t++) { + in_t = freq_in / (k_bypass ? 1 : (k + 2)); + pll_out = freq_out / (n_t + 2); + if (in_t < 0) + continue; + if (in_t == pll_out) { + m_bypass = true; + n = n_t; + goto code_find; + } + red = abs(in_t - pll_out); + if (red < red_t) { + m_bypass = true; + n = n_t; + m = m_t; + if (red == 0) + goto code_find; + red_t = red; + } + for (m_t = 0; m_t <= max_m; m_t++) { + out_t = in_t / (m_t + 2); + red = abs(out_t - pll_out); + if (red < red_t) { + m_bypass = false; + n = n_t; + m = m_t; + if (red == 0) + goto code_find; + red_t = red; + } + } + } + pr_debug("Only get approximation about PLL\n"); + +code_find: + + pll_code->m_bp = m_bypass; + pll_code->k_bp = k_bypass; + pll_code->m_code = m; + pll_code->n_code = n; + pll_code->k_code = k; + return 0; +} + +static int rt1318_set_dai_pll(struct snd_soc_dai *dai, int pll_id, int source, + unsigned int freq_in, unsigned int freq_out) +{ + struct snd_soc_component *component = dai->component; + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + struct rt1318_pll_code pll_code; + int ret; + + if (!freq_in || !freq_out) { + dev_dbg(component->dev, "PLL disabled\n"); + rt1318->pll_in = 0; + rt1318->pll_out = 0; + return 0; + } + + if (source == rt1318->pll_src && freq_in == rt1318->pll_in && + freq_out == rt1318->pll_out) + return 0; + + switch (source) { + case RT1318_PLL_S_BCLK0: + regmap_update_bits(rt1318->regmap, RT1318_CLK1, + RT1318_PLLIN_MASK, RT1318_PLLIN_BCLK0); + break; + case RT1318_PLL_S_BCLK1: + regmap_update_bits(rt1318->regmap, RT1318_CLK1, + RT1318_PLLIN_MASK, RT1318_PLLIN_BCLK1); + break; + case RT1318_PLL_S_RC: + regmap_update_bits(rt1318->regmap, RT1318_CLK1, + RT1318_PLLIN_MASK, RT1318_PLLIN_RC); + break; + case RT1318_PLL_S_MCLK: + regmap_update_bits(rt1318->regmap, RT1318_CLK1, + RT1318_PLLIN_MASK, RT1318_PLLIN_MCLK); + break; + case RT1318_PLL_S_SDW_IN_PLL: + regmap_update_bits(rt1318->regmap, RT1318_CLK1, + RT1318_PLLIN_MASK, RT1318_PLLIN_SDW1); + break; + case RT1318_PLL_S_SDW_0: + regmap_update_bits(rt1318->regmap, RT1318_CLK1, + RT1318_PLLIN_MASK, RT1318_PLLIN_SDW2); + break; + case RT1318_PLL_S_SDW_1: + regmap_update_bits(rt1318->regmap, RT1318_CLK1, + RT1318_PLLIN_MASK, RT1318_PLLIN_SDW3); + break; + case RT1318_PLL_S_SDW_2: + regmap_update_bits(rt1318->regmap, RT1318_CLK1, + RT1318_PLLIN_MASK, RT1318_PLLIN_SDW4); + break; + default: + dev_err(component->dev, "Unknown PLL source %d\n", source); + return -EINVAL; + } + + ret = rt1318_pll_calc(freq_in, freq_out, &pll_code); + if (ret < 0) { + dev_err(component->dev, "Unsupport input clock %d\n", freq_in); + return ret; + } + + dev_dbg(component->dev, "bypass=%d m=%d n=%d k=%d\n", + pll_code.m_bp, (pll_code.m_bp ? 0 : pll_code.m_code), + pll_code.n_code, pll_code.k_code); + + regmap_update_bits(rt1318->regmap, RT1318_PLL1_K, + RT1318_K_PLL1_MASK, pll_code.k_code); + regmap_update_bits(rt1318->regmap, RT1318_PLL1_M, + RT1318_M_PLL1_MASK, (pll_code.m_bp ? 0 : pll_code.m_code)); + regmap_update_bits(rt1318->regmap, RT1318_PLL1_N_8, + RT1318_N_8_PLL1_MASK, pll_code.n_code >> 8); + regmap_update_bits(rt1318->regmap, RT1318_PLL1_N_7_0, + RT1318_N_7_0_PLL1_MASK, pll_code.n_code); + + rt1318->pll_in = freq_in; + rt1318->pll_out = freq_out; + rt1318->pll_src = source; + + return 0; +} + +static int rt1318_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask, + unsigned int rx_mask, int slots, int slot_width) +{ + struct snd_soc_component *component = dai->component; + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + unsigned int cn = 0, cl = 0, rx_slotnum; + int ret = 0, first_bit; + + switch (slots) { + case 4: + cn |= RT1318_I2S_CH_TX_4CH; + cn |= RT1318_I2S_CH_RX_4CH; + break; + case 6: + cn |= RT1318_I2S_CH_TX_6CH; + cn |= RT1318_I2S_CH_RX_6CH; + break; + case 8: + cn |= RT1318_I2S_CH_TX_8CH; + cn |= RT1318_I2S_CH_RX_8CH; + break; + case 2: + break; + default: + return -EINVAL; + } + + switch (slot_width) { + case 20: + cl |= RT1318_I2S_TX_CHL_20; + cl |= RT1318_I2S_RX_CHL_20; + break; + case 24: + cl |= RT1318_I2S_TX_CHL_24; + cl |= RT1318_I2S_RX_CHL_24; + break; + case 32: + cl |= RT1318_I2S_TX_CHL_32; + cl |= RT1318_I2S_RX_CHL_32; + break; + case 8: + cl |= RT1318_I2S_TX_CHL_8; + cl |= RT1318_I2S_RX_CHL_8; + break; + case 16: + break; + default: + return -EINVAL; + } + + /* Rx slot configuration */ + rx_slotnum = hweight_long(rx_mask); + if (rx_slotnum != 1) { + ret = -EINVAL; + dev_err(component->dev, "too many rx slots or zero slot\n"); + goto _set_tdm_err_; + } + + first_bit = __ffs(rx_mask); + switch (first_bit) { + case 0: + case 2: + case 4: + case 6: + regmap_update_bits(rt1318->regmap, + RT1318_TDM_CTRL9, + RT1318_TDM_I2S_TX_L_DAC1_1_MASK | + RT1318_TDM_I2S_TX_R_DAC1_1_MASK, + (first_bit << RT1318_TDM_I2S_TX_L_DAC1_1_SFT) | + ((first_bit + 1) << RT1318_TDM_I2S_TX_R_DAC1_1_SFT)); + break; + case 1: + case 3: + case 5: + case 7: + regmap_update_bits(rt1318->regmap, + RT1318_TDM_CTRL9, + RT1318_TDM_I2S_TX_L_DAC1_1_MASK | + RT1318_TDM_I2S_TX_R_DAC1_1_MASK, + ((first_bit - 1) << RT1318_TDM_I2S_TX_L_DAC1_1_SFT) | + (first_bit << RT1318_TDM_I2S_TX_R_DAC1_1_SFT)); + break; + default: + ret = -EINVAL; + goto _set_tdm_err_; + } + + regmap_update_bits(rt1318->regmap, RT1318_TDM_CTRL2, + RT1318_I2S_CH_TX_MASK | RT1318_I2S_CH_RX_MASK, cn); + regmap_update_bits(rt1318->regmap, RT1318_TDM_CTRL3, + RT1318_I2S_TX_CHL_MASK | RT1318_I2S_RX_CHL_MASK, cl); + +_set_tdm_err_: + return ret; +} + +static int rt1318_probe(struct snd_soc_component *component) +{ + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + + rt1318->component = component; + + schedule_work(&rt1318->cali_work); + rt1318->rt1318_dvol = RT1318_DVOL_STEP; + + return 0; +} + +static void rt1318_remove(struct snd_soc_component *component) +{ + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + + cancel_work_sync(&rt1318->cali_work); +} + +#ifdef CONFIG_PM +static int rt1318_suspend(struct snd_soc_component *component) +{ + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + + regcache_cache_only(rt1318->regmap, true); + regcache_mark_dirty(rt1318->regmap); + return 0; +} + +static int rt1318_resume(struct snd_soc_component *component) +{ + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + + regcache_cache_only(rt1318->regmap, false); + regcache_sync(rt1318->regmap); + return 0; +} +#else +#define rt1318_suspend NULL +#define rt1318_resume NULL +#endif + +#define RT1318_STEREO_RATES SNDRV_PCM_RATE_8000_192000 +#define RT1318_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S8) + +static const struct snd_soc_dai_ops rt1318_aif_dai_ops = { + .hw_params = rt1318_hw_params, + .set_fmt = rt1318_set_dai_fmt, + .set_sysclk = rt1318_set_dai_sysclk, + .set_pll = rt1318_set_dai_pll, + .set_tdm_slot = rt1318_set_tdm_slot, +}; + +static struct snd_soc_dai_driver rt1318_dai[] = { + { + .name = "rt1318-aif", + .id = 0, + .playback = { + .stream_name = "AIF1 Playback", + .channels_min = 1, + .channels_max = 2, + .rates = RT1318_STEREO_RATES, + .formats = RT1318_FORMATS, + }, + .ops = &rt1318_aif_dai_ops, + } +}; + +static const struct snd_soc_component_driver soc_component_dev_rt1318 = { + .probe = rt1318_probe, + .remove = rt1318_remove, + .suspend = rt1318_suspend, + .resume = rt1318_resume, + .controls = rt1318_snd_controls, + .num_controls = ARRAY_SIZE(rt1318_snd_controls), + .dapm_widgets = rt1318_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(rt1318_dapm_widgets), + .dapm_routes = rt1318_dapm_routes, + .num_dapm_routes = ARRAY_SIZE(rt1318_dapm_routes), + .use_pmdown_time = 1, + .endianness = 1, +}; + +static const struct regmap_config rt1318_regmap = { + .reg_bits = 32, + .val_bits = 8, + .readable_reg = rt1318_readable_register, + .volatile_reg = rt1318_volatile_register, + .max_register = 0x41001888, + .reg_defaults = rt1318_reg, + .num_reg_defaults = ARRAY_SIZE(rt1318_reg), + .cache_type = REGCACHE_RBTREE, + .use_single_read = true, + .use_single_write = true, +}; + +static const struct i2c_device_id rt1318_i2c_id[] = { + { "rt1318", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, rt1318_i2c_id); + +static const struct of_device_id rt1318_of_match[] = { + { .compatible = "realtek,rt1318", }, + {}, +}; +MODULE_DEVICE_TABLE(of, rt1318_of_match); + +#ifdef CONFIG_ACPI +static const struct acpi_device_id rt1318_acpi_match[] = { + { "10EC1318", 0}, + { }, +}; +MODULE_DEVICE_TABLE(acpi, rt1318_acpi_match); +#endif + +static int rt1318_parse_dt(struct rt1318_priv *rt1318, struct device *dev) +{ + device_property_read_u32(dev, "realtek,r0_l", + &rt1318->pdata.init_r0_l); + device_property_read_u32(dev, "realtek,r0_r", + &rt1318->pdata.init_r0_r); + + return 0; +} + +static void rt1318_calibration_sequence(struct rt1318_priv *rt1318) +{ + regmap_write(rt1318->regmap, RT1318_CLK1, 0x22); + regmap_write(rt1318->regmap, RT1318_PLL1_N_7_0, 0x06); + regmap_write(rt1318->regmap, RT1318_STP_TEMP_L, 0xCC); + regmap_write(rt1318->regmap, RT1318_STP_SEL_L, 0x40); + regmap_write(rt1318->regmap, RT1318_STP_SEL_R, 0x40); + regmap_write(rt1318->regmap, RT1318_SINE_GEN0, 0x20); + regmap_write(rt1318->regmap, RT1318_SPK_VOL_TH, 0x00); + regmap_write(rt1318->regmap, RT1318_FEEDBACK_PATH, 0x0B); + regmap_write(rt1318->regmap, RT1318_TCON, 0x1C); + regmap_write(rt1318->regmap, RT1318_TCON_RELATE, 0x58); + regmap_write(rt1318->regmap, RT1318_TCON_RELATE, 0x78); + regmap_write(rt1318->regmap, RT1318_STP_R0_EN_L, 0xC2); +} + +static void rt1318_r0_calculate(struct rt1318_priv *rt1318) +{ + unsigned int r0_l, r0_l_byte0, r0_l_byte1, r0_l_byte2, r0_l_byte3; + unsigned int r0_r, r0_r_byte0, r0_r_byte1, r0_r_byte2, r0_r_byte3; + unsigned int r0_l_integer, r0_l_factor, r0_r_integer, r0_r_factor; + unsigned int format = 16777216; /* 2^24 */ + + regmap_read(rt1318->regmap, RT1318_R0_L_24, &r0_l_byte0); + regmap_read(rt1318->regmap, RT1318_R0_L_23_16, &r0_l_byte1); + regmap_read(rt1318->regmap, RT1318_R0_L_15_8, &r0_l_byte2); + regmap_read(rt1318->regmap, RT1318_R0_L_7_0, &r0_l_byte3); + r0_l = r0_l_byte0 << 24 | r0_l_byte1 << 16 | r0_l_byte2 << 8 | r0_l_byte3; + r0_l_integer = format / r0_l; + r0_l_factor = (format * 10) / r0_l - r0_l_integer * 10; + + regmap_read(rt1318->regmap, RT1318_R0_R_24, &r0_r_byte0); + regmap_read(rt1318->regmap, RT1318_R0_R_23_16, &r0_r_byte1); + regmap_read(rt1318->regmap, RT1318_R0_R_15_8, &r0_r_byte2); + regmap_read(rt1318->regmap, RT1318_R0_R_7_0, &r0_r_byte3); + r0_r = r0_r_byte0 << 24 | r0_r_byte1 << 16 | r0_r_byte2 << 8 | r0_r_byte3; + r0_r_integer = format / r0_r; + r0_r_factor = (format * 10) / r0_r - r0_r_integer * 10; + + dev_dbg(rt1318->component->dev, "r0_l_ch:%d.%d ohm\n", r0_l_integer, r0_l_factor); + dev_dbg(rt1318->component->dev, "r0_r_ch:%d.%d ohm\n", r0_r_integer, r0_r_factor); +} + +static void rt1318_r0_restore(struct rt1318_priv *rt1318) +{ + regmap_write(rt1318->regmap, RT1318_PRE_R0_L_24, + (rt1318->pdata.init_r0_l >> 24) & 0xff); + regmap_write(rt1318->regmap, RT1318_PRE_R0_L_23_16, + (rt1318->pdata.init_r0_l >> 16) & 0xff); + regmap_write(rt1318->regmap, RT1318_PRE_R0_L_15_8, + (rt1318->pdata.init_r0_l >> 8) & 0xff); + regmap_write(rt1318->regmap, RT1318_PRE_R0_L_7_0, + (rt1318->pdata.init_r0_l >> 0) & 0xff); + regmap_write(rt1318->regmap, RT1318_PRE_R0_R_24, + (rt1318->pdata.init_r0_r >> 24) & 0xff); + regmap_write(rt1318->regmap, RT1318_PRE_R0_R_23_16, + (rt1318->pdata.init_r0_r >> 16) & 0xff); + regmap_write(rt1318->regmap, RT1318_PRE_R0_R_15_8, + (rt1318->pdata.init_r0_r >> 8) & 0xff); + regmap_write(rt1318->regmap, RT1318_PRE_R0_R_7_0, + (rt1318->pdata.init_r0_r >> 0) & 0xff); + regmap_write(rt1318->regmap, RT1318_STP_SEL_L, 0x80); + regmap_write(rt1318->regmap, RT1318_STP_SEL_R, 0x80); + regmap_write(rt1318->regmap, RT1318_R0_CMP_L_FLAG, 0xc0); + regmap_write(rt1318->regmap, RT1318_R0_CMP_R_FLAG, 0xc0); + regmap_write(rt1318->regmap, RT1318_STP_R0_EN_L, 0xc0); + regmap_write(rt1318->regmap, RT1318_STP_R0_EN_R, 0xc0); + regmap_write(rt1318->regmap, RT1318_STP_TEMP_L, 0xcc); + regmap_write(rt1318->regmap, RT1318_TCON, 0x9c); +} + +static int rt1318_calibrate(struct rt1318_priv *rt1318) +{ + int chk_cnt = 30, count = 0; + int val, val2; + + regmap_write(rt1318->regmap, RT1318_PWR_STA1, 0x1); + usleep_range(0, 10000); + rt1318_calibration_sequence(rt1318); + + while (count < chk_cnt) { + msleep(100); + regmap_read(rt1318->regmap, RT1318_R0_CMP_L_FLAG, &val); + regmap_read(rt1318->regmap, RT1318_R0_CMP_R_FLAG, &val2); + val = (val >> 1) & 0x1; + val2 = (val2 >> 1) & 0x1; + if (val & val2) { + dev_dbg(rt1318->component->dev, "Calibration done.\n"); + break; + } + count++; + if (count == chk_cnt) { + regmap_write(rt1318->regmap, RT1318_PWR_STA1, 0x0); + return RT1318_R0_CALIB_NOT_DONE; + } + } + regmap_write(rt1318->regmap, RT1318_PWR_STA1, 0x0); + regmap_read(rt1318->regmap, RT1318_R0_CMP_L_FLAG, &val); + regmap_read(rt1318->regmap, RT1318_R0_CMP_R_FLAG, &val2); + if ((val & 0x1) & (val2 & 0x1)) + return RT1318_R0_IN_RANGE; + else + return RT1318_R0_OUT_OF_RANGE; +} + +static void rt1318_calibration_work(struct work_struct *work) +{ + struct rt1318_priv *rt1318 = + container_of(work, struct rt1318_priv, cali_work); + int ret; + + if (rt1318->pdata.init_r0_l && rt1318->pdata.init_r0_r) + rt1318_r0_restore(rt1318); + else { + ret = rt1318_calibrate(rt1318); + if (ret == RT1318_R0_IN_RANGE) + rt1318_r0_calculate(rt1318); + dev_dbg(rt1318->component->dev, "Calibrate R0 result:%d\n", ret); + } +} + +static int rt1318_i2c_probe(struct i2c_client *i2c) +{ + struct rt1318_platform_data *pdata = dev_get_platdata(&i2c->dev); + struct rt1318_priv *rt1318; + int ret, val, val2, dev_id; + + rt1318 = devm_kzalloc(&i2c->dev, sizeof(struct rt1318_priv), + GFP_KERNEL); + if (!rt1318) + return -ENOMEM; + + i2c_set_clientdata(i2c, rt1318); + + if (pdata) + rt1318->pdata = *pdata; + else + rt1318_parse_dt(rt1318, &i2c->dev); + + rt1318->regmap = devm_regmap_init_i2c(i2c, &rt1318_regmap); + if (IS_ERR(rt1318->regmap)) { + ret = PTR_ERR(rt1318->regmap); + dev_err(&i2c->dev, "Failed to allocate register map: %d\n", + ret); + return ret; + } + + regmap_read(rt1318->regmap, RT1318_DEV_ID1, &val); + regmap_read(rt1318->regmap, RT1318_DEV_ID2, &val2); + dev_id = (val << 8) | val2; + if (dev_id != 0x6821) { + dev_err(&i2c->dev, + "Device with ID register %#x is not rt1318\n", + dev_id); + return -ENODEV; + } + + ret = regmap_register_patch(rt1318->regmap, init_list, + ARRAY_SIZE(init_list)); + if (ret != 0) + dev_warn(&i2c->dev, "Failed to apply regmap patch: %d\n", ret); + + INIT_WORK(&rt1318->cali_work, rt1318_calibration_work); + + return devm_snd_soc_register_component(&i2c->dev, + &soc_component_dev_rt1318, rt1318_dai, ARRAY_SIZE(rt1318_dai)); +} + +struct i2c_driver rt1318_i2c_driver = { + .driver = { + .name = "rt1318", + .of_match_table = of_match_ptr(rt1318_of_match), + .acpi_match_table = ACPI_PTR(rt1318_acpi_match), + }, + .probe_new = rt1318_i2c_probe, + .id_table = rt1318_i2c_id, +}; +module_i2c_driver(rt1318_i2c_driver); + +MODULE_DESCRIPTION("ASoC RT1318 driver"); +MODULE_AUTHOR("Jack Yu <jack.yu(a)realtek.com>"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/rt1318.h b/sound/soc/codecs/rt1318.h new file mode 100644 index 000000000000..cec40b484216 --- /dev/null +++ b/sound/soc/codecs/rt1318.h @@ -0,0 +1,342 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * rt1318.h -- Platform data for RT1318 + * + * Copyright 2024 Realtek Semiconductor Corp. + */ +#include <sound/rt1318.h> + +#ifndef __RT1318_H__ +#define __RT1318_H__ + +struct rt1318_priv { + struct snd_soc_component *component; + struct rt1318_platform_data pdata; + struct work_struct cali_work; + struct regmap *regmap; + + unsigned int r0_l_integer; + unsigned int r0_l_factor; + unsigned int r0_r_integer; + unsigned int r0_r_factor; + int rt1318_init; + int rt1318_dvol; + int sysclk_src; + int sysclk; + int lrck; + int bclk; + int master; + int pll_src; + int pll_in; + int pll_out; +}; + +#define RT1318_PLL_INP_MAX 40000000 +#define RT1318_PLL_INP_MIN 256000 +#define RT1318_PLL_N_MAX 0x1ff +#define RT1318_PLL_K_MAX 0x1f +#define RT1318_PLL_M_MAX 0x1f + +#define RT1318_LRCLK_192000 192000 +#define RT1318_LRCLK_96000 96000 +#define RT1318_LRCLK_48000 48000 +#define RT1318_LRCLK_44100 44100 +#define RT1318_LRCLK_16000 16000 +#define RT1318_DVOL_STEP 383 + +#define RT1318_CLK1 0xc001 +#define RT1318_CLK2 0xc003 +#define RT1318_CLK3 0xc004 +#define RT1318_CLK4 0xc005 +#define RT1318_CLK5 0xc006 +#define RT1318_CLK6 0xc007 +#define RT1318_CLK7 0xc008 +#define RT1318_PWR_STA1 0xc121 +#define RT1318_SPK_VOL_TH 0xc130 +#define RT1318_TCON 0xc203 +#define RT1318_SRC_TCON 0xc204 +#define RT1318_TCON_RELATE 0xc206 +#define RT1318_DA_VOL_L_8 0xc20b +#define RT1318_DA_VOL_L_1_7 0xc20c +#define RT1318_DA_VOL_R_8 0xc20d +#define RT1318_DA_VOL_R_1_7 0xc20e +#define RT1318_FEEDBACK_PATH 0xc321 +#define RT1318_STP_TEMP_L 0xdb00 +#define RT1318_STP_SEL_L 0xdb08 +#define RT1318_STP_R0_EN_L 0xdb12 +#define RT1318_R0_CMP_L_FLAG 0xdb35 +#define RT1318_PRE_R0_L_24 0xdbb5 +#define RT1318_PRE_R0_L_23_16 0xdbb6 +#define RT1318_PRE_R0_L_15_8 0xdbb7 +#define RT1318_PRE_R0_L_7_0 0xdbb8 +#define RT1318_R0_L_24 0xdbc5 +#define RT1318_R0_L_23_16 0xdbc6 +#define RT1318_R0_L_15_8 0xdbc7 +#define RT1318_R0_L_7_0 0xdbc8 +#define RT1318_STP_SEL_R 0xdd08 +#define RT1318_STP_R0_EN_R 0xdd12 +#define RT1318_R0_CMP_R_FLAG 0xdd35 +#define RT1318_PRE_R0_R_24 0xddb5 +#define RT1318_PRE_R0_R_23_16 0xddb6 +#define RT1318_PRE_R0_R_15_8 0xddb7 +#define RT1318_PRE_R0_R_7_0 0xddb8 +#define RT1318_R0_R_24 0xddc5 +#define RT1318_R0_R_23_16 0xddc6 +#define RT1318_R0_R_15_8 0xddc7 +#define RT1318_R0_R_7_0 0xddc8 +#define RT1318_DEV_ID1 0xf012 +#define RT1318_DEV_ID2 0xf013 +#define RT1318_PLL1_K 0xf20d +#define RT1318_PLL1_M 0xf20f +#define RT1318_PLL1_N_8 0xf211 +#define RT1318_PLL1_N_7_0 0xf212 +#define RT1318_SINE_GEN0 0xf800 +#define RT1318_TDM_CTRL1 0xf900 +#define RT1318_TDM_CTRL2 0xf901 +#define RT1318_TDM_CTRL3 0xf902 +#define RT1318_TDM_CTRL9 0xf908 + + +/* Clock-1 (0xC001) */ +#define RT1318_PLLIN_MASK (0x7 << 4) +#define RT1318_PLLIN_BCLK0 (0x0 << 4) +#define RT1318_PLLIN_BCLK1 (0x1 << 4) +#define RT1318_PLLIN_RC (0x2 << 4) +#define RT1318_PLLIN_MCLK (0x3 << 4) +#define RT1318_PLLIN_SDW1 (0x4 << 4) +#define RT1318_PLLIN_SDW2 (0x5 << 4) +#define RT1318_PLLIN_SDW3 (0x6 << 4) +#define RT1318_PLLIN_SDW4 (0x7 << 4) +#define RT1318_SYSCLK_SEL_MASK (0x7 << 0) +#define RT1318_SYSCLK_BCLK (0x0 << 0) +#define RT1318_SYSCLK_SDW (0x1 << 0) +#define RT1318_SYSCLK_PLL2F (0x2 << 0) +#define RT1318_SYSCLK_PLL2B (0x3 << 0) +#define RT1318_SYSCLK_MCLK (0x4 << 0) +#define RT1318_SYSCLK_RC1 (0x5 << 0) +#define RT1318_SYSCLK_RC2 (0x6 << 0) +#define RT1318_SYSCLK_RC3 (0x7 << 0) +/* Clock-2 (0xC003) */ +#define RT1318_DIV_AP_MASK (0x3 << 4) +#define RT1318_DIV_AP_SFT 4 +#define RT1318_DIV_AP_DIV1 (0x0 << 4) +#define RT1318_DIV_AP_DIV2 (0x1 << 4) +#define RT1318_DIV_AP_DIV4 (0x2 << 4) +#define RT1318_DIV_AP_DIV8 (0x3 << 4) +#define RT1318_DIV_DAMOD_MASK (0x3 << 0) +#define RT1318_DIV_DAMOD_SFT 0 +#define RT1318_DIV_DAMOD_DIV1 (0x0 << 0) +#define RT1318_DIV_DAMOD_DIV2 (0x1 << 0) +#define RT1318_DIV_DAMOD_DIV4 (0x2 << 0) +#define RT1318_DIV_DAMOD_DIV8 (0x3 << 0) +/* Clock-3 (0xC004) */ +#define RT1318_AD_STO1_MASK (0x7 << 4) +#define RT1318_AD_STO1_SFT 4 +#define RT1318_AD_STO1_DIV1 (0x0 << 4) +#define RT1318_AD_STO1_DIV2 (0x1 << 4) +#define RT1318_AD_STO1_DIV4 (0x2 << 4) +#define RT1318_AD_STO1_DIV8 (0x3 << 4) +#define RT1318_AD_STO1_DIV16 (0x4 << 4) +#define RT1318_AD_STO2_MASK (0x7 << 0) +#define RT1318_AD_STO2_SFT 0 +#define RT1318_AD_STO2_DIV1 (0x0 << 0) +#define RT1318_AD_STO2_DIV2 (0x1 << 0) +#define RT1318_AD_STO2_DIV4 (0x2 << 0) +#define RT1318_AD_STO2_DIV8 (0x3 << 0) +#define RT1318_AD_STO2_DIV16 (0x4 << 0) +#define RT1318_AD_STO2_SFT 0 +/* Clock-4 (0xC005) */ +#define RT1318_AD_ANA_STO1_MASK (0x7 << 4) +#define RT1318_AD_ANA_STO1_SFT 4 +#define RT1318_AD_ANA_STO1_DIV1 (0x0 << 4) +#define RT1318_AD_ANA_STO1_DIV2 (0x1 << 4) +#define RT1318_AD_ANA_STO1_DIV4 (0x2 << 4) +#define RT1318_AD_ANA_STO1_DIV8 (0x3 << 4) +#define RT1318_AD_ANA_STO1_DIV16 (0x4 << 4) +#define RT1318_AD_ANA_STO2_MASK (0x7 << 0) +#define RT1318_AD_ANA_STO2_DIV1 (0x0 << 0) +#define RT1318_AD_ANA_STO2_DIV2 (0x1 << 0) +#define RT1318_AD_ANA_STO2_DIV4 (0x2 << 0) +#define RT1318_AD_ANA_STO2_DIV8 (0x3 << 0) +#define RT1318_AD_ANA_STO2_DIV16 (0x4 << 0) +#define RT1318_AD_ANA_STO2_SFT 0 +/* Clock-5 (0xC006) */ +#define RT1318_DIV_FIFO_IN_MASK (0x3 << 4) +#define RT1318_DIV_FIFO_IN_SFT 4 +#define RT1318_DIV_FIFO_IN_DIV1 (0x0 << 4) +#define RT1318_DIV_FIFO_IN_DIV2 (0x1 << 4) +#define RT1318_DIV_FIFO_IN_DIV4 (0x2 << 4) +#define RT1318_DIV_FIFO_IN_DIV8 (0x3 << 4) +#define RT1318_DIV_FIFO_OUT_MASK (0x3 << 0) +#define RT1318_DIV_FIFO_OUT_DIV1 (0x0 << 0) +#define RT1318_DIV_FIFO_OUT_DIV2 (0x1 << 0) +#define RT1318_DIV_FIFO_OUT_DIV4 (0x2 << 0) +#define RT1318_DIV_FIFO_OUT_DIV8 (0x3 << 0) +#define RT1318_DIV_FIFO_OUT_SFT 0 +/* Clock-6 (0xC007) */ +#define RT1318_DIV_NLMS_MASK (0x3 << 6) +#define RT1318_DIV_NLMS_SFT 6 +#define RT1318_DIV_NLMS_DIV1 (0x0 << 6) +#define RT1318_DIV_NLMS_DIV2 (0x1 << 6) +#define RT1318_DIV_NLMS_DIV4 (0x2 << 6) +#define RT1318_DIV_NLMS_DIV8 (0x3 << 6) +#define RT1318_DIV_AD_MONO_MASK (0x7 << 3) +#define RT1318_DIV_AD_MONO_SFT 3 +#define RT1318_DIV_AD_MONO_DIV1 (0x0 << 3) +#define RT1318_DIV_AD_MONO_DIV2 (0x1 << 3) +#define RT1318_DIV_AD_MONO_DIV4 (0x2 << 3) +#define RT1318_DIV_AD_MONO_DIV8 (0x3 << 3) +#define RT1318_DIV_AD_MONO_DIV16 (0x4 << 3) +#define RT1318_DIV_POST_G_MASK (0x7 << 0) +#define RT1318_DIV_POST_G_SFT 0 +#define RT1318_DIV_POST_G_DIV1 (0x0 << 0) +#define RT1318_DIV_POST_G_DIV2 (0x1 << 0) +#define RT1318_DIV_POST_G_DIV4 (0x2 << 0) +#define RT1318_DIV_POST_G_DIV8 (0x3 << 0) +#define RT1318_DIV_POST_G_DIV16 (0x4 << 0) +/* Power Status 1 (0xC121) */ +#define RT1318_PDB_CTRL_MASK (0x1) +#define RT1318_PDB_CTRL_LOW (0x0) +#define RT1318_PDB_CTRL_HIGH (0x1) +#define RT1318_PDB_CTRL_SFT 0 +/* SRC Tcon(0xc204) */ +#define RT1318_SRCIN_IN_SEL_MASK (0x3 << 6) +#define RT1318_SRCIN_IN_48K (0x0 << 6) +#define RT1318_SRCIN_IN_44P1 (0x1 << 6) +#define RT1318_SRCIN_IN_32K (0x2 << 6) +#define RT1318_SRCIN_IN_16K (0x3 << 6) +#define RT1318_SRCIN_F12288_MASK (0x3 << 4) +#define RT1318_SRCIN_TCON1 (0x0 << 4) +#define RT1318_SRCIN_TCON2 (0x1 << 4) +#define RT1318_SRCIN_TCON4 (0x2 << 4) +#define RT1318_SRCIN_TCON8 (0x3 << 4) +#define RT1318_SRCIN_DACLK_MASK (0x3 << 2) +#define RT1318_DACLK_TCON1 (0x0 << 2) +#define RT1318_DACLK_TCON2 (0x1 << 2) +#define RT1318_DACLK_TCON4 (0x2 << 2) +#define RT1318_DACLK_TCON8 (0x3 << 2) +/* R0 Compare Flag (0xDB35) */ +#define RT1318_R0_RANGE_MASK (0x1) +#define RT1318_R0_OUTOFRANGE (0x0) +#define RT1318_R0_INRANGE (0x1) +/* PLL internal setting (0xF20D), K value */ +#define RT1318_K_PLL1_MASK (0x1f << 0) +/* PLL internal setting (0xF20F), M value */ +#define RT1318_M_PLL1_MASK (0x1f << 0) +/* PLL internal setting (0xF211), N_8 value */ +#define RT1318_N_8_PLL1_MASK (0x1 << 0) +/* PLL internal setting (0xF212), N_7_0 value */ +#define RT1318_N_7_0_PLL1_MASK (0xff << 0) +/* TDM CTRL 1 (0xf900) */ +#define RT1318_TDM_BCLK_MASK (0x1 << 7) +#define RT1318_TDM_BCLK_NORM (0x0 << 7) +#define RT1318_TDM_BCLK_INV (0x1 << 7) +#define RT1318_I2S_FMT_MASK (0x7 << 0) +#define RT1318_FMT_I2S (0x0 << 0) +#define RT1318_FMT_LEFT_J (0x1 << 0) +#define RT1318_FMT_PCM_A_R (0x2 << 0) +#define RT1318_FMT_PCM_B_R (0x3 << 0) +#define RT1318_FMT_PCM_A_F (0x6 << 0) +#define RT1318_FMT_PCM_B_F (0x7 << 0) +#define RT1318_I2S_FMT_SFT 0 +/* TDM CTRL 2 (0xf901) */ +#define RT1318_I2S_CH_TX_MASK (0x3 << 6) +#define RT1318_I2S_CH_TX_2CH (0x0 << 6) +#define RT1318_I2S_CH_TX_4CH (0x1 << 6) +#define RT1318_I2S_CH_TX_6CH (0x2 << 6) +#define RT1318_I2S_CH_TX_8CH (0x3 << 6) +#define RT1318_I2S_CH_RX_MASK (0x3 << 4) +#define RT1318_I2S_CH_RX_2CH (0x0 << 4) +#define RT1318_I2S_CH_RX_4CH (0x1 << 4) +#define RT1318_I2S_CH_RX_6CH (0x2 << 4) +#define RT1318_I2S_CH_RX_8CH (0x3 << 4) +#define RT1318_I2S_DL_MASK 0x7 +#define RT1318_I2S_DL_SFT 0 +#define RT1318_I2S_DL_16 0x0 +#define RT1318_I2S_DL_20 0x1 +#define RT1318_I2S_DL_24 0x2 +#define RT1318_I2S_DL_32 0x3 +#define RT1318_I2S_DL_8 0x4 +/* TDM CTRL 3 (0xf902) */ +#define RT1318_I2S_TX_CHL_MASK (0x7 << 4) +#define RT1318_I2S_TX_CHL_SFT 4 +#define RT1318_I2S_TX_CHL_16 (0x0 << 4) +#define RT1318_I2S_TX_CHL_20 (0x1 << 4) +#define RT1318_I2S_TX_CHL_24 (0x2 << 4) +#define RT1318_I2S_TX_CHL_32 (0x3 << 4) +#define RT1318_I2S_TX_CHL_8 (0x4 << 4) +#define RT1318_I2S_RX_CHL_MASK (0x7 << 0) +#define RT1318_I2S_RX_CHL_SFT 0 +#define RT1318_I2S_RX_CHL_16 (0x0 << 0) +#define RT1318_I2S_RX_CHL_20 (0x1 << 0) +#define RT1318_I2S_RX_CHL_24 (0x2 << 0) +#define RT1318_I2S_RX_CHL_32 (0x3 << 0) +#define RT1318_I2S_RX_CHL_8 (0x4 << 0) +/* TDM CTRL 9 (0xf908) */ +#define RT1318_TDM_I2S_TX_L_DAC1_1_MASK (0x7 << 4) +#define RT1318_TDM_I2S_TX_R_DAC1_1_MASK 0x7 +#define RT1318_TDM_I2S_TX_L_DAC1_1_SFT 4 +#define RT1318_TDM_I2S_TX_R_DAC1_1_SFT 0 + +#define RT1318_REG_DISP_LEN 23 + +/* System Clock Source */ +enum { + RT1318_SCLK_S_BCLK, + RT1318_SCLK_S_SDW, + RT1318_SCLK_S_PLL2F, + RT1318_SCLK_S_PLL2B, + RT1318_SCLK_S_MCLK, + RT1318_SCLK_S_RC0, + RT1318_SCLK_S_RC1, + RT1318_SCLK_S_RC2, +}; + +/* PLL Source */ +enum { + RT1318_PLL_S_BCLK0, + RT1318_PLL_S_BCLK1, + RT1318_PLL_S_RC, + RT1318_PLL_S_MCLK, + RT1318_PLL_S_SDW_IN_PLL, + RT1318_PLL_S_SDW_0, + RT1318_PLL_S_SDW_1, + RT1318_PLL_S_SDW_2, +}; + +/* TDM channel */ +enum { + RT1318_2CH, + RT1318_4CH, + RT1318_6CH, + RT1318_8CH, +}; + +/* R0 calibration result */ +enum { + RT1318_R0_OUT_OF_RANGE, + RT1318_R0_IN_RANGE, + RT1318_R0_CALIB_NOT_DONE, +}; + +/* PLL pre-defined M/N/K */ + +struct pll_calc_map { + unsigned int pll_in; + unsigned int pll_out; + int k; + int n; + int m; + bool m_bp; + bool k_bp; +}; + +struct rt1318_pll_code { + bool m_bp; /* Indicates bypass m code or not. */ + bool k_bp; /* Indicates bypass k code or not. */ + int m_code; + int n_code; + int k_code; +}; + +#endif /* __RT1318_H__ */ -- 2.34.1

3 4

[bug report] ASoC: codecs: lpass-macro: add helpers to get codec version
by Dan Carpenter 20 Jun '24

20 Jun '24

Hello Srinivas Kandagatla, Commit 378918d59181 ("ASoC: codecs: lpass-macro: add helpers to get codec version") from Jun 13, 2024 (linux-next), leads to the following Smatch static checker warning: sound/soc/codecs/lpass-va-macro.c:1485 va_macro_set_lpass_codec_version() error: uninitialized symbol 'version'. sound/soc/codecs/lpass-va-macro.c 1464 static void va_macro_set_lpass_codec_version(struct va_macro *va) 1465 { 1466 int core_id_0 = 0, core_id_1 = 0, core_id_2 = 0, version; We could just initialize this to zero to make the checker happy? The compiler is generally going to zero it anyway so it's free. 1467 1468 regmap_read(va->regmap, CDC_VA_TOP_CSR_CORE_ID_0, &core_id_0); 1469 regmap_read(va->regmap, CDC_VA_TOP_CSR_CORE_ID_1, &core_id_1); 1470 regmap_read(va->regmap, CDC_VA_TOP_CSR_CORE_ID_2, &core_id_2); 1471 1472 if ((core_id_0 == 0x01) && (core_id_1 == 0x0F)) 1473 version = LPASS_CODEC_VERSION_2_0; 1474 if ((core_id_0 == 0x02) && (core_id_1 == 0x0E)) 1475 version = LPASS_CODEC_VERSION_2_1; 1476 if ((core_id_0 == 0x02) && (core_id_1 == 0x0F) && (core_id_2 == 0x50 || core_id_2 == 0x51)) 1477 version = LPASS_CODEC_VERSION_2_5; 1478 if ((core_id_0 == 0x02) && (core_id_1 == 0x0F) && (core_id_2 == 0x60 || core_id_2 == 0x61)) 1479 version = LPASS_CODEC_VERSION_2_6; 1480 if ((core_id_0 == 0x02) && (core_id_1 == 0x0F) && (core_id_2 == 0x70 || core_id_2 == 0x71)) 1481 version = LPASS_CODEC_VERSION_2_7; 1482 if ((core_id_0 == 0x02) && (core_id_1 == 0x0F) && (core_id_2 == 0x80 || core_id_2 == 0x81)) 1483 version = LPASS_CODEC_VERSION_2_8; 1484 --> 1485 lpass_macro_set_codec_version(version); 1486 1487 dev_dbg(va->dev, "LPASS Codec Version %s\n", lpass_macro_get_codec_version_string(version)); 1488 } regards, dan carpenter

1 0

[PATCH] ALSA: hda: cs35l56: Select SERIAL_MULTI_INSTANTIATE
by Simon Trimmer 20 Jun '24

20 Jun '24

The ACPI IDs used in the CS35L56 HDA drivers are all handled by the serial multi-instantiate driver which starts multiple Linux device instances from a single ACPI Device() node. As serial multi-instantiate is not an optional part of the system add it as a dependency in Kconfig so that it is not overlooked. Signed-off-by: Simon Trimmer <simont(a)opensource.cirrus.com> --- sound/pci/hda/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig index 1252632f0ffa..731f4e99bc75 100644 --- a/sound/pci/hda/Kconfig +++ b/sound/pci/hda/Kconfig @@ -162,6 +162,7 @@ config SND_HDA_SCODEC_CS35L56_I2C depends on ACPI || COMPILE_TEST depends on SND_SOC select FW_CS_DSP + select SERIAL_MULTI_INSTANTIATE select SND_HDA_GENERIC select SND_SOC_CS35L56_SHARED select SND_HDA_SCODEC_CS35L56 @@ -178,6 +179,7 @@ config SND_HDA_SCODEC_CS35L56_SPI depends on ACPI || COMPILE_TEST depends on SND_SOC select FW_CS_DSP + select SERIAL_MULTI_INSTANTIATE select SND_HDA_GENERIC select SND_SOC_CS35L56_SHARED select SND_HDA_SCODEC_CS35L56 -- 2.34.1

2 1

ALSA volume control ignored for "4c4a:4155 Jieli Technology USB Composite Device"
by GitHub issues - opened 20 Jun '24

20 Jun '24

alsa-project/alsa-lib issue #401 was opened from davidmcnabnz: I just purchased a generic USB audio interface, which shows up in `lsusb` as: ``` 4c4a:4155 Jieli Technology USB Composite Device ``` The device on the whole seems to _simply just work_. But the level control for the stereo capture seems to be completely ignored, both in `alsamixer` and `pavucontrol`. My setup is Debian GNU/Linux 12 (bookworm), standard apt including contrib. General stack is wireplumber and pipewire, implementing JACK via pw-jack and pipewire-pulse. This is working very well for my music work. Lastly, below is a paste of my currently installed packages relevant to ALSA and JACK. Grateful if anyone can advise. Cheers David ``` ii a2jmidid 9-3 amd64 Daemon for exposing legacy ALSA MIDI in JACK MIDI systems ii aj-snapshot 0.9.9-4 amd64 make snapshots of JACK connections ii alsa-tools 1.2.5-3 amd64 Console based ALSA utilities for specific hardware ii alsa-tools-gui 1.2.5-3 amd64 GUI based ALSA utilities for specific hardware ii alsa-topology-conf 1.2.5.1-2 all ALSA topology configuration files ii alsa-ucm-conf 1.2.8-1 all ALSA Use Case Manager configuration files ii alsa-utils 1.2.8-1 amd64 Utilities for configuring and using ALSA ii drumstick-data 2.7.2-1 all Qt5/C++ wrapper for ALSA Sequencer (data files) ii gir1.2-cvc-1.0:amd64 5.6.1-1 amd64 Introspection data for Cinnamon pulseaudio abstraction ii gnome-remote-desktop 43.3-1 amd64 Remote desktop daemon for GNOME using PipeWire ii gstreamer1.0-alsa:amd64 1.22.0-3+deb12u1 amd64 GStreamer plugin for ALSA ii gstreamer1.0-pipewire:amd64 0.3.65-3+deb12u1 amd64 GStreamer 1.0 plugin for the PipeWire multimedia server ii jack-midi-clock 0.4.3-1+b1 amd64 JACK client that sends MIDI beat clock pulses ii jack-mixer 17-2+b2 amd64 GTK+ JACK audio mixer application (Python 3) ii jack-tools 20131226-1.1 amd64 various JACK tools: dl, record, scope, osc, plumbing, udp, play, transport ii jackd 5+nmu1 all JACK Audio Connection Kit (default server package) ii jackd2 1.9.21~dfsg-3 amd64 JACK Audio Connection Kit (server and example clients) ii jackd2-firewire 1.9.21~dfsg-3 amd64 JACK Audio Connection Kit (FFADO backend) ii jackmeter 0.4-1+b2 amd64 a basic command line meter for the JACK audio system ii jacktrip 1.7.0+ds-1 amd64 high-quality system for audio network performances (cmdline) ii klick 0.12.2-4.1 amd64 advanced metronome for JACK ii kmetronome 1.3.1-1 amd64 ALSA MIDI Metronome ii libasound2:amd64 1.2.8-1+b1 amd64 shared library for ALSA applications ii libasound2:i386 1.2.8-1+b1 i386 shared library for ALSA applications ii libasound2-data 1.2.8-1 all Configuration files and profiles for ALSA drivers ii libasound2-dev:amd64 1.2.8-1+b1 amd64 shared library for ALSA applications -- development files ii libasound2-plugins:amd64 1.2.7.1-1 amd64 ALSA library additional plugins ii libasound2-plugins:i386 1.2.7.1-1 i386 ALSA library additional plugins ii libatopology2:amd64 1.2.8-1+b1 amd64 shared library for handling ALSA topology definitions ii libcanberra-pulse:amd64 0.30-10 amd64 PulseAudio backend for libcanberra ii libclalsadrv2 2.0.0-3.1 amd64 ALSA driver C++ access library ii libcvc0:amd64 5.6.1-1 amd64 Cinnamon pulseaudio abstraction library ii libdrumstick-alsa2:amd64 2.7.2-1 amd64 Qt5/C++ wrapper for ALSA Sequencer (shared library) ii libdrumstick-widgets2:amd64 2.7.2-1 amd64 Qt5/C++ wrapper for ALSA Sequencer (widgets) ii libjack-jackd2-0:amd64 1.9.21~dfsg-3 amd64 JACK Audio Connection Kit (libraries) ii libjack-jackd2-0:i386 1.9.21~dfsg-3 i386 JACK Audio Connection Kit (libraries) ii libjack-jackd2-dev:amd64 1.9.21~dfsg-3 amd64 JACK Audio Connection Kit (development files) ii libpipewire-0.3-0:amd64 0.3.65-3+deb12u1 amd64 libraries for the PipeWire multimedia server ii libpipewire-0.3-common 0.3.65-3+deb12u1 all libraries for the PipeWire multimedia server - common files ii libpipewire-0.3-modules:amd64 0.3.65-3+deb12u1 amd64 libraries for the PipeWire multimedia server - modules ii libpulse-mainloop-glib0:amd64 16.1+dfsg1-2+b1 amd64 PulseAudio client libraries (glib support) ii libpulse0:amd64 16.1+dfsg1-2+b1 amd64 PulseAudio client libraries ii libpulse0:i386 16.1+dfsg1-2+b1 i386 PulseAudio client libraries ii libpulsedsp:amd64 16.1+dfsg1-2+b1 amd64 PulseAudio OSS pre-load library ii libspa-0.2-bluetooth:amd64 0.3.65-3+deb12u1 amd64 libraries for the PipeWire multimedia server - bluetooth plugins ii libspa-0.2-modules:amd64 0.3.65-3+deb12u1 amd64 libraries for the PipeWire multimedia server Simple Plugin API - modules ii libzita-alsa-pcmi0:amd64 0.6.1-1 amd64 C++ wrapper around the ALSA API ii lsp-plugins-jack 1.2.5-1 amd64 LSP (Linux Studio Plugins) audio-plugins (standalone JACK clients) ii mudita24 1.0.3+svn13-7 amd64 ALSA GUI control tool for Envy24 (ice1712) soundcards ii multimedia-jack 0.10 all JACK (Jack Audio Connection Kit) and ALSA related packages ii pavucontrol 5.0-2 amd64 PulseAudio Volume Control ii pipewire:amd64 0.3.65-3+deb12u1 amd64 audio and video processing engine multimedia server ii pipewire-alsa:amd64 0.3.65-3+deb12u1 amd64 PipeWire ALSA plugin ii pipewire-audio 0.3.65-3+deb12u1 all recommended set of PipeWire packages for a standard audio desktop use ii pipewire-bin 0.3.65-3+deb12u1 amd64 PipeWire multimedia server - programs ii pipewire-jack:amd64 0.3.65-3+deb12u1 amd64 PipeWire JACK plugin ii pipewire-pulse 0.3.65-3+deb12u1 amd64 PipeWire PulseAudio daemon ii pulseaudio-utils 16.1+dfsg1-2+b1 amd64 Command line tools for the PulseAudio sound server ii qasconfig 0.23.0-1 amd64 ALSA configuration browser ii qashctl 0.23.0-1 amd64 mixer for ALSA's High level Control Interface ii qasmixer 0.23.0-1 amd64 ALSA mixer for the desktop ii qjackctl 0.9.9-1 amd64 User interface for controlling the JACK sound server ii silentjack 0.3-2+b2 amd64 silence detector for the JACK audio system ii wireplumber 0.4.13-1 amd64 modular session / policy manager for PipeWire ii xjadeo 0.8.12-1 amd64 Video player with JACK sync ii zita-ajbridge 0.8.4-1 amd64 alsa to jack bridge ii zita-alsa-pcmi-utils 0.6.1-1 amd64 Two simple demo programs zita-alsa-pcmi library ii zita-lrx 0.1.2-1 amd64 Command line jack application providing crossover filters ii zita-mu1 0.3.3-2 amd64 organise stereo monitoring for Jack Audio Connection Kit ii zita-njbridge 0.4.8-1 amd64 Jack clients to transmit multichannel audio over a local IP network ``` Issue URL : https://github.com/alsa-project/alsa-lib/issues/401 Repository URL: https://github.com/alsa-project/alsa-lib

1 0

[PATCH v6 0/7] ASoC: codecs: wcd937x: add wcd937x audio codec support
by Mohammad Rafi Shaik 19 Jun '24

19 Jun '24

This patchset adds support for Qualcomm WCD9370/WCD9375 codec. Qualcomm WCD9370/WCD9375 Codec is a standalone Hi-Fi audio codec IC connected over SoundWire. This device has two SoundWire devices, RX and TX respectively supporting 3 x ADCs, ClassH, Ear, Aux PA, 2xHPH, 6 DMICs and MBHC. For codec driver to be functional it would need both tx and rx Soundwire devices to be up and this is taken care by using device component framework and device-links are used to ensure proper pm dependencies. Ex tx does not enter suspend before rx or codec is suspended. This patchset along with other SoundWire patches on the list have been tested on QCM6490 IDP device. Changes since v5: - Remove the string compare in MIC BIAS widget settings as suggested by Srinivas Kandagatla - Fixed Unbalanced pm_runtime_enable! in wcd937x-sdw soundwire slave. Changes since v4: - Removed volatile/read-only registers from defaults list - Added wcd939x_volatile_register() with only volatile registers - Added a wcd939x_readable_register() with read-only and read-write registers, so cache does it's job - Fixed Spurious events for mixer controls and validated with mixer selftest tool - Used TLV instead of enum for ear_pa_gain mixer control - Used enum constraints instead of OneOf in dt-binding patch - Added vdd-px supply property as non optional in dt-binding patch - Reworked and done driver cleanup Changes since v3: - Fixed dt binding check errors. - Added constraints on values in v4-0001 binding patch as suggested by Krzysztof - Change the patch sequence soundwire driver first then codec driver - Added missing .remove soundwire driver function - Reworked and done driver cleanup Changes since v2: - Used common qcom,wcd93xx-common.yaml. removed duplicate properties. - Merged bindings patches "v2-0001" and "v2-0003" in single patch for easy review. - Fixed dt binding check errors. - Added missing "qcom,wcd9375-codec" in v3-0001 dt binding patch. - Added constraints on values in v3-0001 binding patch as suggested by Krzysztof - Fix the typo mistake in v2 cover letter Changes since v1: - Split the patch per driver for easier review as suggested by Krzysztof - Used devm_gpiod_get api to get reset gpio as suggested by Krzysztof Prasad Kumpatla (7): ASoC: dt-bindings: document wcd937x Audio Codec ASoC: codecs: wcd937x-sdw: add SoundWire driver ASoC: codecs: wcd937x: add wcd937x codec driver ASoC: codecs: wcd937x: add basic controls ASoC: codecs: wcd937x: add playback dapm widgets ASoC: codecs: wcd937x: add capture dapm widgets ASoC: codecs: wcd937x: add audio routing and Kconfig .../bindings/sound/qcom,wcd937x-sdw.yaml | 91 + .../bindings/sound/qcom,wcd937x.yaml | 82 + sound/soc/codecs/Kconfig | 20 + sound/soc/codecs/Makefile | 7 + sound/soc/codecs/wcd937x-sdw.c | 1136 +++++++ sound/soc/codecs/wcd937x.c | 3011 +++++++++++++++++ sound/soc/codecs/wcd937x.h | 653 ++++ 7 files changed, 5000 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/qcom,wcd937x-sdw.yaml create mode 100644 Documentation/devicetree/bindings/sound/qcom,wcd937x.yaml create mode 100644 sound/soc/codecs/wcd937x-sdw.c create mode 100644 sound/soc/codecs/wcd937x.c create mode 100644 sound/soc/codecs/wcd937x.h base-commit: d35b2284e966c0bef3e2182a5c5ea02177dd32e4 -- 2.25.1

4 17

[PATCH] ASoC: cs35l56: Accept values greater than 0 as IRQ numbers
by Simon Trimmer 19 Jun '24

19 Jun '24

IRQ lookup functions such as those in ACPI can return error values when an IRQ is not defined. The i2c core driver converts the error codes to a value of 0 and the SPI bus driver passes them unaltered to client device drivers. The cs35l56 driver should only accept positive non-zero values as IRQ numbers. Signed-off-by: Simon Trimmer <simont(a)opensource.cirrus.com> Fixes: 8a731fd37f8b ("ASoC: cs35l56: Move utility functions to shared file") --- sound/soc/codecs/cs35l56-shared.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/cs35l56-shared.c b/sound/soc/codecs/cs35l56-shared.c index 27869e14e9c8..880228f89baf 100644 --- a/sound/soc/codecs/cs35l56-shared.c +++ b/sound/soc/codecs/cs35l56-shared.c @@ -397,7 +397,7 @@ int cs35l56_irq_request(struct cs35l56_base *cs35l56_base, int irq) { int ret; - if (!irq) + if (irq < 1) return 0; ret = devm_request_threaded_irq(cs35l56_base->dev, irq, NULL, cs35l56_irq, -- 2.34.1

3 13

[PATCH v5] ASoc: tas2781: Enable RCA-based playback without DSP firmware download
by Shenghao Ding 19 Jun '24

19 Jun '24

In only loading RCA (Reconfigurable Architecture) binary case, no DSP program will be working inside tas2563/tas2781, that is dsp-bypass mode, do not support speaker protection, or audio acoustic algorithms in this mode. Fixes: ef3bcde75d06 ("ASoC: tas2781: Add tas2781 driver") Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> --- v5: - Add reviewed-by information. - Add comments on it is not an error in case of RCA-Only, ie, failure to load DSP firmware. v4: - Add a description of what the state machine looks like. - Remove TASDEVICE_DSP_FW_NONE because of unused. - Remove stray change. - Fix broken indentation. v3: - Add description on RCA is Reconfigurable Architecture. - Add the description on enabling - Reword the commit - Remove question mark in the comments. - Add spaces in comments. v2: - Correct comment. - Add Fixes. - Move header file to the first. v1: - Split out the different logical changes into different patches. - rename tasdevice_dsp_fw_state -> tasdevice_fw_state, the fw are not only DSP fw, but also RCA(Reconfigurable data, such as acoustic data and register setting, etc). - Add TASDEVICE_RCA_FW_OK in tasdevice_fw_state to identify the state that only RCA binary file has been download successfully, but DSP fw is not loaded or loading failure. - Add the this strategy into tasdevice_tuning_switch. - If one side of the if/else has a braces both should in tasdevice_tuning_switch. - Identify whehter both RCA and DSP have been loaded or only RCA has been loaded in tasdevice_fw_ready. - Add check fw load status in tasdevice_startup. - remove ret in tasdevice_startup to make the code neater. --- include/sound/tas2781-dsp.h | 11 +++++++-- sound/soc/codecs/tas2781-fmwlib.c | 18 ++++++++++---- sound/soc/codecs/tas2781-i2c.c | 39 ++++++++++++++++++++----------- 3 files changed, 48 insertions(+), 20 deletions(-) diff --git a/include/sound/tas2781-dsp.h b/include/sound/tas2781-dsp.h index 7fba7ea26a4b..3cda9da14f6d 100644 --- a/include/sound/tas2781-dsp.h +++ b/include/sound/tas2781-dsp.h @@ -117,10 +117,17 @@ struct tasdevice_fw { struct device *dev; }; -enum tasdevice_dsp_fw_state { - TASDEVICE_DSP_FW_NONE = 0, +enum tasdevice_fw_state { + /* Driver in startup mode, not load any firmware. */ TASDEVICE_DSP_FW_PENDING, + /* DSP firmware in the system, but parsing error. */ TASDEVICE_DSP_FW_FAIL, + /* + * Only RCA (Reconfigurable Architecture) firmware load + * successfully. + */ + TASDEVICE_RCA_FW_OK, + /* Both RCA and DSP firmware load successfully. */ TASDEVICE_DSP_FW_ALL_OK, }; diff --git a/sound/soc/codecs/tas2781-fmwlib.c b/sound/soc/codecs/tas2781-fmwlib.c index 265a8ca25cbb..838d29fead96 100644 --- a/sound/soc/codecs/tas2781-fmwlib.c +++ b/sound/soc/codecs/tas2781-fmwlib.c @@ -2324,14 +2324,21 @@ void tasdevice_tuning_switch(void *context, int state) struct tasdevice_fw *tas_fmw = tas_priv->fmw; int profile_cfg_id = tas_priv->rcabin.profile_cfg_id; - if (tas_priv->fw_state == TASDEVICE_DSP_FW_FAIL) { - dev_err(tas_priv->dev, "DSP bin file not loaded\n"); + /* + * Only RCA-based Playback can still work with no dsp program running + * inside the chip. + */ + switch (tas_priv->fw_state) { + case TASDEVICE_RCA_FW_OK: + case TASDEVICE_DSP_FW_ALL_OK: + break; + default: return; } if (state == 0) { - if (tas_priv->cur_prog < tas_fmw->nr_programs) { - /*dsp mode or tuning mode*/ + if (tas_fmw && tas_priv->cur_prog < tas_fmw->nr_programs) { + /* dsp mode or tuning mode */ profile_cfg_id = tas_priv->rcabin.profile_cfg_id; tasdevice_select_tuningprm_cfg(tas_priv, tas_priv->cur_prog, tas_priv->cur_conf, @@ -2340,9 +2347,10 @@ void tasdevice_tuning_switch(void *context, int state) tasdevice_select_cfg_blk(tas_priv, profile_cfg_id, TASDEVICE_BIN_BLK_PRE_POWER_UP); - } else + } else { tasdevice_select_cfg_blk(tas_priv, profile_cfg_id, TASDEVICE_BIN_BLK_PRE_SHUTDOWN); + } } EXPORT_SYMBOL_NS_GPL(tasdevice_tuning_switch, SND_SOC_TAS2781_FMWLIB); diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c index 9350972dfefe..c64d458e524e 100644 --- a/sound/soc/codecs/tas2781-i2c.c +++ b/sound/soc/codecs/tas2781-i2c.c @@ -380,23 +380,37 @@ static void tasdevice_fw_ready(const struct firmware *fmw, mutex_lock(&tas_priv->codec_lock); ret = tasdevice_rca_parser(tas_priv, fmw); - if (ret) + if (ret) { + tasdevice_config_info_remove(tas_priv); goto out; + } tasdevice_create_control(tas_priv); tasdevice_dsp_remove(tas_priv); tasdevice_calbin_remove(tas_priv); - tas_priv->fw_state = TASDEVICE_DSP_FW_PENDING; + /* + * The baseline is the RCA-only case, and then the code attempts to + * load DSP firmware but in case of failures just keep going, i.e. + * failing to load DSP firmware is NOT an error. + */ + tas_priv->fw_state = TASDEVICE_RCA_FW_OK; scnprintf(tas_priv->coef_binaryname, 64, "%s_coef.bin", tas_priv->dev_name); ret = tasdevice_dsp_parser(tas_priv); if (ret) { dev_err(tas_priv->dev, "dspfw load %s error\n", tas_priv->coef_binaryname); - tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; goto out; } - tasdevice_dsp_create_ctrls(tas_priv); + + /* + * If no dsp-related kcontrol created, the dsp resource will be freed. + */ + ret = tasdevice_dsp_create_ctrls(tas_priv); + if (ret) { + dev_err(tas_priv->dev, "dsp controls error\n"); + goto out; + } tas_priv->fw_state = TASDEVICE_DSP_FW_ALL_OK; @@ -417,9 +431,8 @@ static void tasdevice_fw_ready(const struct firmware *fmw, tasdevice_prmg_load(tas_priv, 0); tas_priv->cur_prog = 0; out: - if (tas_priv->fw_state == TASDEVICE_DSP_FW_FAIL) { - /*If DSP FW fail, kcontrol won't be created */ - tasdevice_config_info_remove(tas_priv); + if (tas_priv->fw_state == TASDEVICE_RCA_FW_OK) { + /* If DSP FW fail, DSP kcontrol won't be created. */ tasdevice_dsp_remove(tas_priv); } mutex_unlock(&tas_priv->codec_lock); @@ -466,14 +479,14 @@ static int tasdevice_startup(struct snd_pcm_substream *substream, { struct snd_soc_component *codec = dai->component; struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(codec); - int ret = 0; - if (tas_priv->fw_state != TASDEVICE_DSP_FW_ALL_OK) { - dev_err(tas_priv->dev, "DSP bin file not loaded\n"); - ret = -EINVAL; + switch (tas_priv->fw_state) { + case TASDEVICE_RCA_FW_OK: + case TASDEVICE_DSP_FW_ALL_OK: + return 0; + default: + return -EINVAL; } - - return ret; } static int tasdevice_hw_params(struct snd_pcm_substream *substream, -- 2.34.1

2 1

[PATCH] ASoC: dt-bindings: audio-graph-card2: add support for aux devices
by Kuninori Morimoto 19 Jun '24

19 Jun '24

Add device tree property to define auxiliary devices to be added to Audio Graph Card which is already supported on Simle Card. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> --- .../devicetree/bindings/sound/audio-graph-card2.yaml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml b/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml index d3ce4de449d5..f943f90d8b15 100644 --- a/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml +++ b/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml @@ -23,6 +23,11 @@ properties: Each entry is a pair of strings, the first being the connection's sink, the second being the connection's source. $ref: /schemas/types.yaml#/definitions/non-unique-string-array + aux-devs: + description: | + List of phandles pointing to auxiliary devices, such + as amplifiers, to be added to the sound card. + $ref: /schemas/types.yaml#/definitions/phandle-array multi: type: object description: Multi-CPU/Codec node -- 2.43.0

2 1

[PATCH 0/5] ASoC: dt-bindings: rename akXXXX to asahi-kasei,akXXXX
by Kuninori Morimoto 19 Jun '24

19 Jun '24

Hi Mark Cc Rob, Krzysztof. These patches adds vendor prefix to asahi-kasei Kuninori Morimoto (5): ASoC: dt-bindings: rename ak4118.txt to asahi-kasei,ak4118.txt ASoC: dt-bindings: rename ak5386.txt to asahi-kasei,ak5386.txt ASoC: dt-bindings: rename ak4375.yaml to asahi-kasei,ak4375.yaml ASoC: dt-bindings: rename ak4613.yaml to asahi-kasei,ak4613.yaml ASoC: dt-bindings: rename ak4642.yaml to asahi-kasei,ak4642.yaml .../bindings/sound/{ak4118.txt => asahi-kasei,ak4118.txt} | 0 .../bindings/sound/{ak4375.yaml => asahi-kasei,ak4375.yaml} | 2 +- .../bindings/sound/{ak4613.yaml => asahi-kasei,ak4613.yaml} | 2 +- .../bindings/sound/{ak4642.yaml => asahi-kasei,ak4642.yaml} | 2 +- .../bindings/sound/{ak5386.txt => asahi-kasei,ak5386.txt} | 0 5 files changed, 3 insertions(+), 3 deletions(-) rename Documentation/devicetree/bindings/sound/{ak4118.txt => asahi-kasei,ak4118.txt} (100%) rename Documentation/devicetree/bindings/sound/{ak4375.yaml => asahi-kasei,ak4375.yaml} (94%) rename Documentation/devicetree/bindings/sound/{ak4613.yaml => asahi-kasei,ak4613.yaml} (94%) rename Documentation/devicetree/bindings/sound/{ak4642.yaml => asahi-kasei,ak4642.yaml} (94%) rename Documentation/devicetree/bindings/sound/{ak5386.txt => asahi-kasei,ak5386.txt} (100%) -- 2.43.0

2 10

[PATCH 0/2] ASoC: codecs: lpass-wsa: fix vi capture setup
by Srinivas Kandagatla 19 Jun '24

19 Jun '24

This two patches fixes issues with VI capture rate and path setup. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> --- Srinivas Kandagatla (2): ASoC: codecs:lpass-wsa-macro: Fix vi feedback rate ASoC: codecs:lpass-wsa-macro: Fix logic of enabling vi channels sound/soc/codecs/lpass-wsa-macro.c | 111 +++++++++++++++++++++++++++++-------- 1 file changed, 88 insertions(+), 23 deletions(-) --- base-commit: 1613e604df0cd359cf2a7fbd9be7a0bcfacfabd0 change-id: 20240618-lpass-wsa-vi-b63375f21d63 Best regards, -- Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org>

2 4