- Alsa-devel - mailman.alsa-project.org

[alsa-devel] stac9200 speaker/hp not detected
by Brian Hinz 09 Jul '07

09 Jul '07

Hi, I'm trying to get the sound working on my Gateway S-7110M (a.k.a. NX100X?). Using the ini files from the windows driver, I created the following patch (applied to both the hg tree, and 1.0.14): --- a/alsa-kernel/pci/hda/patch_sigmatel.c 2007-07-03 21:59:21.000000000 -0400 +++ b/alsa-kernel/pci/hda/patch_sigmatel.c 2007-06-04 03:28:54.000000000 -0400 @@ -39,6 +39,7 @@ enum { STAC_REF, + STAC_M4, STAC_9200_MODELS }; @@ -453,12 +452,19 @@ 0x02a19020, 0x01a19021, 0x90100140, 0x01813122, }; +static unsigned int stac9200_M4_pin_configs[8] = { + 0x400000fe, 0x00451030, 0x400100f0, 0x90110010, + 0x400100f1, 0x02a1902e, 0x500000f2, 0x500000f3, +}; + static unsigned int *stac9200_brd_tbl[STAC_9200_MODELS] = { [STAC_REF] = ref9200_pin_configs, + [STAC_M4] = stac9200_M4_pin_configs, }; static const char *stac9200_models[STAC_9200_MODELS] = { [STAC_REF] = "ref", + [STAC_M4] = "m4", }; static struct snd_pci_quirk stac9200_cfg_tbl[] = { @@ -494,6 +486,9 @@ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x01f5, "Dell Inspiron 1501", STAC_REF), + /* Gateway */ + SND_PCI_QUIRK(0x107b, 0x0205, "Gateway S-7110M", STAC_M4), + /* Panasonic */ SND_PCI_QUIRK(0x10f7, 0x8338, "Panasonic CF-74", STAC_REF), however it still does not work. I can see in dmesg that the speaker and headphones are not detected, but I can't seem to figure out why: [95006.300000] ALSA /home/bphinz/alsa/alsa-hg/alsa-driver/pci/hda/hda_codec.c:1810: hda_codec: model 'm4' is selected [95006.300000] ALSA /home/bphinz/alsa/alsa-hg/alsa-driver/pci/hda/hda_codec.c:2339: autoconfig: line_outs=1 (0xe/0x0/0x0/0x0/0x0) [95006.300000] ALSA /home/bphinz/alsa/alsa-hg/alsa-driver/pci/hda/hda_codec.c:2343: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [95006.300000] ALSA /home/bphinz/alsa/alsa-hg/alsa-driver/pci/hda/hda_codec.c:2347: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [95006.300000] ALSA /home/bphinz/alsa/alsa-hg/alsa-driver/pci/hda/hda_codec.c:2355: inputs: mic=0x0, fmic=0x10, line=0x0, fline=0x0, cd=0x0, aux=0x0 [95006.432000] ALSA /home/bphinz/alsa/alsa-hg/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/patch_si3054.c:244: si3054: cannot initialize. EXT MID = 0000 [95006.432000] ALSA /home/bphinz/alsa/alsa-hg/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/patch_si3054.c:256: Link Frame Detect(FDT) is not ready (line status: 0000) This laptop has only an internal speaker, a headphone out, and a mic in (unless there are other outs enabled when the dock is connected). The windows INI seems to be setting some gpio bits but I don't understand how to map the ini syntax into the alsa driver (or if it needs to be...) [Models] HDAUDIO\FUNC_01&VEN_8384&DEV_7690=this Default=this [CopyFiles.32] stacgui.cpl = 0x25 stlang.dll = 0x25 stacsv.exe = 0x25 [CopyFiles.64] stacui64.cpl = 0x25 stlang64.dll = 0x25 stacsv64.exe = 0x25 [LaunchProgramsAfter.32] STacSV -r [LaunchProgramsAfter.64] STacSV64 -r [HKLM\Software\Microsoft\Windows\CurrentVersion\Run.32] [HKLM\Software\Microsoft\Windows\CurrentVersion\Run.64] [DelRegKeys] HKR\Settings=Yes HKCU\Software\Sigmatel\Settings=Yes HKLM\Software\Sigmatel\Presets=Yes HKCU\Software\Microsoft\Windows\CurrentVersion\Applets\Volume Control\SigmaTel Audio=Yes HKCU\Software\Microsoft\Windows\CurrentVersion\Applets\Volume Control\SigmaTel C-Major Audio=Yes HKCU\Software\Microsoft\Windows\CurrentVersion\Applets\Volume Control\SigmaTel High Definition Audio=Yes [HKLM\Software\Sigmatel\GlobalState] [HKR] CodecName = "STAC9200" [HKR\Settings] TraceFlags = dword: 0x89B3 CPL_SaveExtraPower = hex: 0 CPL_UserControlsFixedDigitalOutRate = hex: 0 InitVerbs = hex: 0x03, 0xa0, 0x43, 0x01 9200MixerCompensation1PcmMode = hex: 2 9200MixerCompensation2PcmMode = hex: 3 CodecAccessAttempts = dword:00000352 [HKR\Settings\GPIO] 03 = hex: 0x85 AntiPopGpo = hex: 3,2 [HKR\Settings\pin] [HKR\Settings\Pin\08] CfgDflt = dword: 0x400000FE [HKR\Settings\Pin\09] CfgDflt = dword: 0x00451030 [HKR\Settings\Pin\0D] CfgDflt = dword: 0x400100F0 [HKR\Settings\Pin\0E] CfgDflt = dword: 0x90110010 Action = hex: 81,09 [HKR\Settings\Pin\0F] CfgDflt = dword: 0x400100F1 [HKR\Settings\Pin\10] CfgDflt = dword: 0x02A1902E [HKR\Settings\Pin\11] CfgDflt = dword: 0x500000F2 [HKR\Settings\Pin\12] CfgDflt = dword: 0x500000F3 [HKR\Settings\Connselector] [HKR\settings\filter\Speaker] UniqueID = hex: 0 LegacyIoctlHere = hex: 1 Pins = hex: 0E RenderConverter = hex: 2 Associations = hex: 1 DigitalVolumeControl = hex: 0 EnableSetFormatSupport = hex: 1 EnableHwSpeakerConfigurationSupport = hex: 0 EnabledPcmRenderBitsAndRates = dword: 0x000FFFFE MasterControlsIndependentMixerInputs = hex: 0 EnableVendorPcBeep = hex: 1 PcBeepVolume = dword: 0 PcBeepMute = hex: 1 EnableInputMonitor = hex: 1 RecMonitorMute = hex: 1 EnabledNonPcmBitsAndRates = dword: 0x20040 BiosInterfaceAddress = dword: 0x000DF7E0 [HKR\settings\filter\SpdifOut] UniqueID = hex: 1 LegacyIoctlHere = hex: 0 Pins = hex: 09 SpdifOutConverter = hex: 5 SpdifMaster = hex: Associations = hex: 3 EnabledPcmRenderSpdifBitsAndRates = dword: 0x000FFFFF DisableSPDIFControl = hex: 0 [HKR\Settings\filter\MuxedIn] UniqueID = hex: 2 LegacyIoctlHere = hex: 0 Pins = hex: 10 CaptureConverter = hex: 3 EnableCompositeMuxAndAdcCtrl = hex: 0 Associations = hex: 2 MicBoost = hex: 1 DisableMicBoost = hex: 0 EnabledPcmCaptureBitsAndRates = dword: 0x000FFFFF MicInRecVolume = dword: 0x000a8000 [HKR\Settings\filter\MuxedIn\MaxLvlLimiters] MicBoostLevel = dword: 0x000c0000 [HKR\Settings\filter\MuxedIn\TopoNames] [HKLM\software\SigmaTel\Apo\GFX\Speaker\plugins\MSAPO] idEffect = dword: 50 idEffectType = dword: 50 load = dword: 1 order = dword: 5 ApoClsId = "{637c490d-eee3-4c0a-973f-371958802da2}" [HKLM\software\SigmaTel\Apo\LFX\Speaker\plugins\MSAPO] idEffect = dword: 50 idEffectType = dword: 50 load = dword: 1 order = dword: 5 ApoClsId = "{62dc1a93-ae24-464c-a43e-452f824c4250}" [HKLM\software\SigmaTel\Apo\GFX\SpdifOut\plugins\MSAPO] idEffect = dword: 50 idEffectType = dword: 50 load = dword: 1 order = dword: 5 ApoClsId = "{637c490d-eee3-4c0a-973f-371958802da2}" [HKLM\software\SigmaTel\Apo\LFX\SpdifOut\plugins\MSAPO] idEffect = dword: 50 idEffectType = dword: 50 load = dword: 1 order = dword: 5 ApoClsId = "{62dc1a93-ae24-464c-a43e-452f824c4250}" [HKLM\Software\Sigmatel\APO\GFX\Speaker\plugins\SysEq] Load = dword: 1 IdEffect = dword: 101 IdEffectType = dword: 1 Order = dword: 1100 [HKLM\Software\Sigmatel\APO\GFX\Speaker\presets\_Initial\SysEq] NumBands = dword:12 RegVersion = dword: 1 Bypass = dword: 0 [HKLM\Software\Sigmatel\APO\GFX\Speaker\presets\_Initial\SysEq\Band0] idxBand = dword: 0 Flags = dword: 0 ChannelMask = dword: 262143 Type = dword: 1 GroupId = dword: 0 Freq =dword: 150 GainDbx1000 = dword: -3000 Bandwidthx1000 = dword: 1000 [HKLM\Software\Sigmatel\APO\GFX\Speaker\presets\_Initial\SysEq\Band1] idxBand = dword: 1 Flags = dword: 0 ChannelMask = dword: 262143 Type = dword: 0 GroupId = dword: 0 Freq =dword: 300 GainDbx1000 = dword: -3000 Bandwidthx1000 = dword: 1000 [HKLM\Software\Sigmatel\APO\GFX\Speaker\presets\_Initial\SysEq\Band2] idxBand = dword: 2 Flags = dword: 0 ChannelMask = dword: 262143 Type = dword: 0 GroupId = dword: 0 Freq =dword: 500 GainDbx1000 = dword: -2000 Bandwidthx1000 = dword: 1000 [HKLM\Software\Sigmatel\APO\GFX\Speaker\presets\_Initial\SysEq\Band3] idxBand = dword: 3 Flags = dword: 0 ChannelMask = dword: 262143 Type = dword: 0 GroupId = dword: 0 Freq =dword: 750 GainDbx1000 = dword: -1000 Bandwidthx1000 = dword: 1000 [HKLM\Software\Sigmatel\APO\GFX\Speaker\presets\_Initial\SysEq\Band4] idxBand = dword: 4 Flags = dword: 0 ChannelMask = dword: 262143 Type = dword: 0 GroupId = dword: 0 Freq =dword: 1000 GainDbx1000 = dword: 0 Bandwidthx1000 = dword: 1000 [HKLM\Software\Sigmatel\APO\GFX\Speaker\presets\_Initial\SysEq\Band5] idxBand = dword: 5 Flags = dword: 0 ChannelMask = dword: 262143 Type = dword: 0 GroupId = dword: 0 Freq =dword: 2000 GainDbx1000 = dword: -1000 Bandwidthx1000 = dword: 1000 [HKLM\Software\Sigmatel\APO\GFX\Speaker\presets\_Initial\SysEq\Band6] idxBand = dword: 6 Flags = dword: 0 ChannelMask = dword: 262143 Type = dword: 0 GroupId = dword: 0 Freq =dword: 8000 GainDbx1000 = dword: 0 Bandwidthx1000 = dword: 1000 [HKLM\Software\Sigmatel\APO\GFX\Speaker\presets\_Initial\SysEq\Band7] idxBand = dword: 7 Flags = dword: 0 ChannelMask = dword: 262143 Type = dword: 0 GroupId = dword: 0 Freq =dword: 12000 GainDbx1000 = dword: 0 Bandwidthx1000 = dword: 1000 [HKLM\Software\Sigmatel\APO\GFX\Speaker\presets\_Initial\SysEq\Band8] idxBand = dword: 8 Flags = dword: 0 ChannelMask = dword: 262143 Type = dword: 0 GroupId = dword: 0 Freq =dword: 15000 GainDbx1000 = dword: 0 Bandwidthx1000 = dword: 1000 [HKLM\Software\Sigmatel\APO\GFX\Speaker\presets\_Initial\SysEq\Band9] idxBand = dword: 9 Flags = dword: 0 ChannelMask = dword: 262143 Type = dword: 0 GroupId = dword: 0 Freq =dword: 17000 GainDbx1000 = dword: -1000 Bandwidthx1000 = dword: 1000 [HKLM\Software\Sigmatel\APO\GFX\Speaker\presets\_Initial\SysEq\Band10] idxBand = dword: 10 Flags = dword: 0 ChannelMask = dword: 262143 Type = dword: 0 GroupId = dword: 0 Freq =dword: 17000 GainDbx1000 = dword: -1000 Bandwidthx1000 = dword: 1000 [HKLM\Software\Sigmatel\APO\GFX\Speaker\presets\_Initial\SysEq\Band11] idxBand = dword: 11 Flags = dword: 0 ChannelMask = dword: 262143 Type = dword: 2 GroupId = dword: 0 Freq =dword: 17000 GainDbx1000 = dword: -1000 Bandwidthx1000 = dword: 1000 [HKLM\Software\Sigmatel\APO\GFX\Speaker\plugins\Compressor] Load = dword: 1 IdEffect = dword: 5 Order = dword: 1150 [HKLM\Software\Sigmatel\APO\GFX\Speaker\presets\_Initial\Compressor] CompRatio= dword: 200 CompAttack= dword: 9910 CompRelease= dword: 9910 CompThreshDb= dword: -600 MakeupGainDb= dword: 200 GateRatio= dword: 600 GateAttack= dword: 9990 GateRelease= dword: 9990 GateThreshDb= dword: -9000 Flags= dword: 8 [HKLM\Software\Sigmatel\APO\GFX\Speaker\plugins\Limiter] Load = dword: 1 IdEffect = dword: 6 Order = dword: 1155 [HKLM\Software\Sigmatel\APO\GFX\Speaker\presets\_Initial\Limiter] CompRatio= dword: 3700 CompAttack= dword: 9900 CompRelease= dword: 9900 CompThreshDb= dword: 0 MakeupGainDb= dword: 0 GateRatio= dword: 100 GateAttack= dword: 9000 GateRelease= dword: 9000 GateThreshDb= dword: -9000 Flags= dword: 10 [HKLM\SOFTWARE\SigmaTel\STSysTray\1.0\EventExpressions] Version=dword:1 [HKLM\SOFTWARE\SigmaTel\STSysTray\1.0\EventExpressions\JackPresenseD] Action1="if(JackState(13) == 1,(BypassSystemEq(1)),(BypassSystemEq(0)))" Action2="if(JackState(13) == 1,(BypassSystemComp(1)),(BypassSystemComp(0)))" [HKLM\SOFTWARE\Sigmatel\STacGUI] Config_Tab = dword: 0x8 Config_Spk = dword: 0x0 Config_Adv = dword: 0x01 [HKLM\SOFTWARE\Sigmatel\STacGUI\XML] Nconfigs = dword: 0x0 here's the output of /proc/asound/card0/codec#0: Codec: SigmaTel STAC9200 Address: 0 Vendor Id: 0x83847690 Subsystem Id: 0x100 Revision Id: 0x102201 No Modem Function Group found Default PCM: rates [0x7e0]: 44100 48000 88200 96000 176400 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 Node 0x02 [Audio Output] wcaps 0xd0401: Stereo Power: 0x0 Node 0x03 [Audio Input] wcaps 0x1d0541: Stereo Power: 0x0 Connection: 1 0x0a Node 0x04 [Audio Input] wcaps 0x140311: Stereo Digital PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Connection: 1 0x08 Node 0x05 [Audio Output] wcaps 0x40211: Stereo Digital PCM: rates [0x1e0]: 44100 48000 88200 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Node 0x06 [Vendor Defined Widget] wcaps 0xf30201: Stereo Digital Node 0x07 [Audio Selector] wcaps 0x300901: Stereo Connection: 3 0x02* 0x08 0x0a Node 0x08 [Pin Complex] wcaps 0x430681: Stereo Digital Pincap 0x0810024: IN EAPD Detect Pin Default 0x400000fe: [N/A] Line Out at Ext N/A Conn = Unknown, Color = Unknown Pin-ctls: 0x00: Power: 0x0 Node 0x09 [Pin Complex] wcaps 0x400301: Stereo Digital Pincap 0x0810: OUT Pin Default 0x00451030: [Jack] SPDIF Out at Ext N/A Conn = Optical, Color = Black Pin-ctls: 0x40: OUT Connection: 2 0x05* 0x0a Node 0x0a [Audio Selector] wcaps 0x30090d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1 Amp-Out vals: [0x0d 0x0d] Connection: 1 0x0c Node 0x0b [Audio Selector] wcaps 0x300105: Stereo Amp-Out Amp-Out caps: N/A Amp-Out vals: [0x80 0x80] Connection: 1 0x07 Node 0x0c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x04 0x04] Connection: 5 0x10* 0x0f 0x0e 0x0d 0x12 Node 0x0d [Pin Complex] wcaps 0x400181: Stereo Pincap 0x083f: IN OUT HP Detect Pin Default 0x400100f0: [N/A] Line Out at Ext N/A Conn = 1/8, Color = Unknown Pin-ctls: 0x00: Connection: 1 0x0b Node 0x0e [Pin Complex] wcaps 0x400181: Stereo Pincap 0x083f: IN OUT HP Detect Pin Default 0x90110010: [Fixed] Speaker at Int N/A Conn = 1/8, Color = Unknown Pin-ctls: 0x40: OUT Connection: 1 0x0b Node 0x0f [Pin Complex] wcaps 0x400181: Stereo Pincap 0x0837: IN OUT Detect Pin Default 0x400100f1: [N/A] Line Out at Ext N/A Conn = 1/8, Color = Unknown Pin-ctls: 0x20: IN Connection: 1 0x0b Node 0x10 [Pin Complex] wcaps 0x400181: Stereo Pincap 0x081737: IN OUT Detect Pin Default 0x02a1902e: [Jack] Mic at Ext Front Conn = 1/8, Color = Pink Pin-ctls: 0x24: IN Connection: 1 0x0b Node 0x11 [Pin Complex] wcaps 0x400104: Mono Amp-Out Amp-Out caps: N/A Amp-Out vals: [0x00] Pincap 0x0810: OUT Pin Default 0x500000f2: [N/A] Line Out at Int N/A Conn = Unknown, Color = Unknown Pin-ctls: 0x00: Connection: 1 0x13 Node 0x12 [Pin Complex] wcaps 0x400001: Stereo Pincap 0x0820: IN Pin Default 0x500000f3: [N/A] Line Out at Int N/A Conn = Unknown, Color = Unknown Pin-ctls: 0x20: IN Node 0x13 [Audio Mixer] wcaps 0x200100: Mono Connection: 1 0x07 Node 0x14 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=1 Amp-Out vals: [0x00] Thanks for any assistance! -brian

2 7

[alsa-devel] Question about write asoc driver
by Roy Huang 09 Jul '07

09 Jul '07

Hi guys, I am write a codec driver under asoc frame work for ad1980 by study the sample driver wm9712.c. I find there are some control item likes "out3 switch" to control 16h:15. There are also some widget item likes "out 3 PGA" to control 24:5. How can I determine a register bit should be a control item or widget item? Thanks ahead. -Roy

2 1

Re: [alsa-devel] [Pkg-alsa-devel] [PATCH] amixer and special 'front...' channels
by Elimar Riesebieter 09 Jul '07

09 Jul '07

This isn't Ubuntu/Debian specific and should be applied upstream? On Sat, 07 Jul 2007 the mental interface of David Decotigny told: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > > Hi, > > Imagine you have this kind of control: > > Simple mixer control 'Input Source',0 > Capabilities: enum > Items: 'Mic' 'Front Mic' 'Line' > Item0: 'Mic' > > ... and you want to set it to 'Front Mic': > > shell> amixer sset 'Input Source' 'Front Mic' > Simple mixer control 'Input Source',0 > Capabilities: enum > Items: 'Mic' 'Front Mic' 'Line' > Item0: 'Mic' > > This does not work ! Because amixer will think that 'Front' is a > modifier for 'Mic'. > > Attached is a patch against alsa-utils-1.0.13-1ubuntu5 that solves this. > With this patch, one can bypass the modifier parsing: one simply escapes > the parameter with one or more backslash(es), and that's all: > > shell> amixer sset 'Input Source' '\Front Mic' > Simple mixer control 'Input Source',0 > Capabilities: enum > Items: 'Mic' 'Front Mic' 'Line' > Item0: 'Front Mic' > > What this patch also does, is that it adds correct identification of > items. With the original version, given the following enumeration: > foo foobar > Then the parameter 'foobar' will be identified as 'foo', not 'foobar'. > The patch should solve this potential problem (not tested though). > > Bye, > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.4.6 (GNU/Linux) > Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org > > iD8DBQFGj/X0ld7vhusVrCERAjIZAJ9w9GLD+QBwDCaTs32hpW6i9nVMfgCfdS5w > jhipZ2jm87fq4zx4f5Q9Vsc= > =M2KP > -----END PGP SIGNATURE----- > diff -ru alsa-utils-1.0.13/amixer/amixer.1 alsa-utils-1.0.13-mine/amixer/amixer.1 > --- alsa-utils-1.0.13/amixer/amixer.1 2006-09-29 04:53:26.000000000 -0700 > +++ alsa-utils-1.0.13-mine/amixer/amixer.1 2007-07-07 13:09:04.000000000 -0700 > @@ -44,11 +44,14 @@ > The parameters \fIcap, nocap, mute, unmute, toggle\fP are used to > change capture (recording) and muting for the group specified. > > -The optional modifiers can be put as extra parameters to specify > -the stream direction or channels to apply. > -The modifiers \fIplayback\fP and \fIcapture\fP specify the stream, > -and the modifiers \fIfront, rear, center, woofer\fP are used to specify > -channels to be changed. > +The optional modifiers can be put as extra parameters to specify the > +stream direction or channels to apply. The modifiers \fIplayback\fP > +and \fIcapture\fP specify the stream, and the modifiers \fIfront, > +rear, center, woofer\fP are used to specify channels to be changed. If > +there is a confusion between the parameter and these modifiers, then > +any character in the parameter may be escaped with a backslash to > +disambiguate: '\\Front Mic' will be understood as "parameter 'Front > +Mic'", and not as "modifier 'Front' applied to 'Mic' parameter". > > A simple mixer control must be specified. Only one device can be controlled > at a time. > diff -ru alsa-utils-1.0.13/amixer/amixer.c alsa-utils-1.0.13-mine/amixer/amixer.c > --- alsa-utils-1.0.13/amixer/amixer.c 2007-07-07 13:03:39.000000000 -0700 > +++ alsa-utils-1.0.13-mine/amixer/amixer.c 2007-07-07 12:59:19.000000000 -0700 > @@ -1333,6 +1333,16 @@ > return def; > } > > +/** Transform '\a\b c \de' into 'ab c de' */ > +static void unescape(char * arg) > +{ > + char * c; > + for (c = arg ; arg && *arg ; arg ++) > + if (*arg != '\\') > + *(c++) = *arg; > + *c = '\0'; > +} > + > static int get_enum_item_index(snd_mixer_elem_t *elem, char **ptrp) > { > char *ptr = *ptrp; > @@ -1347,7 +1357,7 @@ > if (snd_mixer_selem_get_enum_item_name(elem, i, sizeof(name)-1, name) < 0) > continue; > len = strlen(name); > - if (! strncmp(name, ptr, len)) { > + if (!strncmp(name, ptr, len) && (ptr[len] == '\0')) { > if (! ptr[len] || ptr[len] == ',' || ptr[len] == '\n') { > ptr += len; > *ptrp = ptr; > @@ -1428,6 +1438,7 @@ > dir = dir_mask(&ptr, dir); > if (*ptr == '\0') > continue; > + unescape(ptr); > multi = (strchr(ptr, ',') != NULL); > optr = ptr; > for (chn = 0; chn <= SND_MIXER_SCHN_LAST; chn++) { > _______________________________________________ > Pkg-alsa-devel mailing list > Pkg-alsa-devel(a)lists.alioth.debian.org > http://lists.alioth.debian.org/mailman/listinfo/pkg-alsa-devel -- "Talking much about oneself can also be a means to conceal oneself." -Friedrich Nietzsche

2 1

[alsa-devel] [PATCH] usb-audio: another Logitech camera/microphone ID match
by Daniel Drake 09 Jul '07

09 Jul '07

From: George Shapovalov <george(a)gentoo.org> Another case of ALSA ticket #3040: we need an explicit USB ID match for another Logitech camera/microphone device. Signed-off-by: Daniel Drake <dsd(a)gentoo.org> Index: linux/sound/usb/usbquirks.h =================================================================== --- linux.orig/sound/usb/usbquirks.h +++ linux/sound/usb/usbquirks.h @@ -57,6 +57,15 @@ USB_DEVICE_ID_MATCH_INT_CLASS | USB_DEVICE_ID_MATCH_INT_SUBCLASS, .idVendor = 0x046d, + .idProduct = 0x08ae, + .bInterfaceClass = USB_CLASS_AUDIO, + .bInterfaceSubClass = USB_SUBCLASS_AUDIO_CONTROL +}, +{ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | + USB_DEVICE_ID_MATCH_INT_CLASS | + USB_DEVICE_ID_MATCH_INT_SUBCLASS, + .idVendor = 0x046d, .idProduct = 0x08f0, .bInterfaceClass = USB_CLASS_AUDIO, .bInterfaceSubClass = USB_SUBCLASS_AUDIO_CONTROL

2 1

[alsa-devel] M-Audio Audiophile USB, native little endian (S16_LE) ?
by Hakan Lennestal 09 Jul '07

09 Jul '07

Hi all ! I don't know if this is already known (?), but the M-Audio Audiophile USB seem to be possible to run in native S16_LE mode if initialized with device_setup=0x01 (possibly with 0x11 also, have not tested that). This is at least the case with my rather new box (bought a couple of weeks ago). Patch for usb/usbaudio.c (alsa-driver-1.0.14): static int is_big_endian_format(struct snd_usb_audio *chip, struct audioformat *fp) { switch (chip->usb_id) { case USB_ID(0x0763, 0x2001): /* M-Audio Quattro: captured data only */ if (fp->endpoint & USB_DIR_IN) return 1; break; case USB_ID(0x0763, 0x2003): /* M-Audio Audiophile USB */ + // Is small endian if setup with 0x01 ! + if (device_setup[chip->index] != 0x01) return 1; break; } return 0; } /Håkan

3 2

[alsa-devel] [PATCH] ALSA AICA sound on SEGA Dreamcast - fix behaviour in poor resource conditions
by Adrian McMenamin 09 Jul '07

09 Jul '07

Patch against code in alsa-kernel - tested with patched up 2.6.21-rc7 and working well Submitted by: Adrian McMenamin <adrian(a)mcmen.demon.co.uk> Signed-off by: Adrian McMenamin <adrian(a)mcmen.demon.co.uk> diff -ruN aicaold/aica.c aicanew/aica.c --- aicaold/aica.c 2007-07-05 23:01:39.000000000 +0100 +++ aicanew/aica.c 2007-07-05 23:02:02.000000000 +0100 @@ -65,10 +65,6 @@ /* Use workqueue */ -static struct spu_work_holder { - struct work_struct spu_dma_work; - void *sspointer; -} spu_working; static struct workqueue_struct *aica_queue; @@ -252,18 +248,15 @@ static void run_spu_dma(struct work_struct *work) { int buffer_size; - struct snd_pcm_substream *substream; struct snd_pcm_runtime *runtime; struct snd_card_aica *dreamcastcard; - struct spu_work_holder *holder = container_of(work, struct spu_work_holder, spu_dma_work); - substream = holder-> sspointer; - dreamcastcard = substream->pcm->private_data; - runtime = substream->runtime; + dreamcastcard = container_of(work, struct snd_card_aica, spu_dma_work); + runtime = dreamcastcard->substream->runtime; if (unlikely(dreamcastcard->dma_check == 0)) { buffer_size = frames_to_bytes(runtime, runtime->buffer_size); if (runtime->channels > 1) dreamcastcard->channel->flags |= 0x01; - aica_dma_transfer(runtime->channels, buffer_size, substream); + aica_dma_transfer(runtime->channels, buffer_size, dreamcastcard->substream); startup_aica(dreamcastcard); dreamcastcard->clicks = buffer_size / (AICA_PERIOD_SIZE * runtime->channels); @@ -271,7 +264,7 @@ } else { aica_dma_transfer(runtime->channels, AICA_PERIOD_SIZE * runtime->channels, - substream); + dreamcastcard->substream); snd_pcm_period_elapsed(dreamcastcard->substream); dreamcastcard->clicks++; if (unlikely(dreamcastcard->clicks >= AICA_PERIOD_NUMBER)) @@ -307,7 +300,8 @@ dreamcastcard->current_period = play_period; if (unlikely(dreamcastcard->dma_check == 0)) dreamcastcard->dma_check = 1; - queue_work(aica_queue, &(spu_working.spu_dma_work)); + queue_work(aica_queue, &(dreamcastcard->spu_dma_work)); + } static void spu_begin_dma(struct snd_pcm_substream *substream) @@ -317,10 +311,8 @@ struct snd_pcm_runtime *runtime; runtime = substream->runtime; dreamcastcard = substream->pcm->private_data; - /* Use queue to do the heavy lifting */ - spu_working.sspointer = substream; - INIT_WORK(&(spu_working.spu_dma_work), run_spu_dma); - queue_work(aica_queue, &(spu_working.spu_dma_work)); + //get the queue to do the work + queue_work(aica_queue, &(dreamcastcard->spu_dma_work)); /* Timer may already be running */ if (unlikely(dreamcastcard->timer.data)) { mod_timer(&dreamcastcard->timer, jiffies + 4); @@ -366,7 +358,9 @@ *substream) { struct snd_card_aica *dreamcastcard = substream->pcm->private_data; + flush_workqueue(aica_queue); del_timer(&dreamcastcard->timer); + aica_chn_halt(); kfree(dreamcastcard->channel); spu_disable(); return 0; @@ -402,17 +396,10 @@ static int snd_aicapcm_pcm_trigger(struct snd_pcm_substream *substream, int cmd) { - struct snd_card_aica *dreamcastcard; switch (cmd) { case SNDRV_PCM_TRIGGER_START: spu_begin_dma(substream); break; - case SNDRV_PCM_TRIGGER_STOP: - dreamcastcard = substream->pcm->private_data; - if (dreamcastcard->timer.data) - del_timer(&dreamcastcard->timer); - aica_chn_halt(); - break; default: return -EINVAL; } @@ -610,6 +597,8 @@ strcpy(dreamcastcard->card->shortname, SND_AICA_DRIVER); strcpy(dreamcastcard->card->longname, "Yamaha AICA Super Intelligent Sound Processor for SEGA Dreamcast"); + //start the worker thread + INIT_WORK(&(dreamcastcard->spu_dma_work), run_spu_dma); /* Load the PCM 'chip' */ err = snd_aicapcmchip(dreamcastcard, 0); if (unlikely(err < 0)) diff -ruN aicaold/aica.h aicanew/aica.h --- aicaold/aica.h 2007-07-05 23:01:39.000000000 +0100 +++ aicanew/aica.h 2007-07-05 23:02:02.000000000 +0100 @@ -69,6 +69,7 @@ }; struct snd_card_aica { + struct work_struct spu_dma_work; struct snd_card *card; struct aica_channel *channel; struct snd_pcm_substream *substream;

2 7

[alsa-devel] [HDA Intel/STAC92xx] mic not working (retasking?)...
by Daniel J Blueman 09 Jul '07

09 Jul '07

With both 2.6.20 and 2.6.22 kernels on Ubuntu 7.04 on my Sony Vaio SZ240, I'm unable to get my mic connector working at any cost. Well, almost...reading from /dev/dsp, I do see a minute change from 127 for 126 or 128 if I tap my external mic. This would imply the jack-retasking feature of this darn STAC chipset, right? How can I change the jack retasking with the Intel HDA drivers or get further insight into this problem? Thanks in advance, Daniel --- [1] $ lspci -s0:1b.0 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 $ arecord -l **** List of CAPTURE Hardware Devices **** card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 2/2 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 $ amixer info Card default 'Intel'/'HDA Intel at 0xde400000 irq 22' Mixer name : 'SigmaTel CXD9872RD/K' Components : 'HDA:83847661 HDA:14f12bfa' Controls : 6 Simple ctrls : 5 $ amixer controls numid=2,iface=MIXER,name='Master Playback Switch' numid=1,iface=MIXER,name='Master Playback Volume' numid=6,iface=MIXER,name='PCM Playback Volume' numid=5,iface=MIXER,name='Capture Source' numid=4,iface=MIXER,name='Capture Switch' numid=3,iface=MIXER,name='Capture Volume' $ amixer scontrols Simple mixer control 'Master',0 Simple mixer control 'PCM',0 Simple mixer control 'Line',0 Simple mixer control 'Mic',0 Simple mixer control 'Capture',0 $ amixer contents numid=2,iface=MIXER,name='Master Playback Switch' ; type=BOOLEAN,access=rw------,values=2 : values=on,on numid=1,iface=MIXER,name='Master Playback Volume' ; type=INTEGER,access=rw------,values=2,min=0,max=127,step=0 : values=66,66 numid=6,iface=MIXER,name='PCM Playback Volume' ; type=INTEGER,access=rw---RW-,values=2,min=0,max=255,step=0 : values=230,230 | dBscale-min=-51.00dB,step=0.20dB,mute=0 numid=5,iface=MIXER,name='Capture Source' ; type=ENUMERATED,access=rw------,values=1,items=2 ; Item #0 'Line' ; Item #1 'Mic' : values=1 numid=4,iface=MIXER,name='Capture Switch' ; type=BOOLEAN,access=rw------,values=2 : values=on,on numid=3,iface=MIXER,name='Capture Volume' ; type=INTEGER,access=rw---R--,values=2,min=0,max=15,step=0 : values=15,15 | dBscale-min=0.00dB,step=1.50dB,mute=0 -- Daniel J Blueman

3 14

[alsa-devel] Remove dynamic configuration from alsa-lib
by Fausto Carvalho Marques SIlva 08 Jul '07

08 Jul '07

I have a hard job...to remove dynamic configuration from alsa-lib (conf.c,confmisc.c). I found it difficult because snd_conf_* functions are spread all over *.c files. Is there am easy way of doing it ? Does anyone have some "guidelines" of doing it? Any help is wellcome... Fausto Carvalho Marques Silva

5 5

[alsa-devel] hda-intel on macbook: unknown model for ACL882
by Steffen Schulz 07 Jul '07

07 Jul '07

Hi all, Since I didn't get much feedback on alsa-users, I figured I'd place a pointer here, too. The revision 3 macbook pro(santa-rosa) ships with a ALC882. Loading hda_intel with auto-detection results in very VERY quiet sound out of the headphones if 'front' is set to 100%, mic input seems to work too, but also very quiet. Providing an option 'model=w2jc' to modprobe however results in working(loud) front and mic. But this model does not seem to provide headphones output, so they don't work. This sounds to me like it may be easy to fix, so I hope you find this information useful. Would be great to have the sound working. Regards, Steffen (subscribed for the moment..) > The snd-hda-module loads with the following message: > | kernel: hda_codec: Unknown model for ALC882, trying auto-probe from BIOS... > | kernel: ALSA /usr/src/alsa/alsa-driver/pci/hda/hda_codec.c:2339: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) > | kernel: ALSA /usr/src/alsa/alsa-driver/pci/hda/hda_codec.c:2343: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) > | kernel: ALSA /usr/src/alsa/alsa-driver/pci/hda/hda_codec.c:2347: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) > | kernel: ALSA /usr/src/alsa/alsa-driver/pci/hda/hda_codec.c:2355: inputs: mic=0x18, fmic=0x0, line=0x1a, fline=0x0, cd=0x0, aux=0x0 > > aplay -l says: > > | **** List of PLAYBACK Hardware Devices **** > | card 0: Intel [HDA Intel], device 0: ALC882 Analog [ALC882 Analog] > | Subdevices: 1/1 > | Subdevice #0: subdevice #0 > | card 0: Intel [HDA Intel], device 1: ALC882 Digital [ALC882 Digital] > | Subdevices: 1/1 > | Subdevice #0: subdevice #0 > > lspci -vv -nn says: > > | 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03) > | Subsystem: Apple Computer Inc. Unknown device [106b:00a0] > | Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > | Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- > | Latency: 0, Cache Line Size: 256 bytes > | Interrupt: pin A routed to IRQ 20 > | Region 0: Memory at 9b500000 (64-bit, non-prefetchable) [size=16K] > | Capabilities: [50] Power Management version 2 > | Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > | Status: D0 PME-Enable- DSel=0 DScale=0 PME- > | Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- > | Address: 0000000000000000 Data: 0000 > | Capabilities: [70] Express Unknown type IRQ 0 > | Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- > | Device: Latency L0s <64ns, L1 <1us > | Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- > | Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ > | Device: MaxPayload 128 bytes, MaxReadReq 128 bytes > | Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0 > | Link: Latency L0s <64ns, L1 <1us > | Link: ASPM Disabled CommClk- ExtSynch- > | Link: Speed unknown, Width x0 > | Capabilities: [100] Virtual Channel > | Capabilities: [130] Unknown (5)

2 3

[alsa-devel] [HDA Intel/AD1984] Alsa 1.0.14 not working on ThinkPad T61
by joe+alsa＠nahmias.net 06 Jul '07

06 Jul '07

Hello, I'm having trouble getting sound on my ThinkPad T61 working. According to the changelog for alsa-driver 1.0.14, support was added in that version; however, no sound is coming out. I'm running Debian unstable and I'd be happy to test any patches, provide more info, etc... Any help would be appreciated. Thanks, --Joe PS - Here's some debugging info that may be of use: $ uname -srvmo Linux 2.6.21-2-686 #1 SMP Mon Jun 25 20:53:36 UTC 2007 i686 GNU/Linux $ dpkg -l alsa* | grep ^i ii alsa-base 1.0.14-1 ALSA driver configuration files ii alsa-modules-2.6.21-2-686 1.0.14-1+2.6.21-5 ALSA modules for kernel 2.6.21-2-686 ii alsa-source 1.0.14-1 ALSA driver sources ii alsa-utils 1.0.14-1 ALSA utilities $ aumix -q pcm 90, 90 mic 0, 0 pcm2 100, 100 igain 56, 56 $ lsmod | grep snd snd_hda_intel 244952 0 snd_pcm_oss 39680 0 snd_mixer_oss 15840 1 snd_pcm_oss snd_pcm 72292 2 snd_hda_intel,snd_pcm_oss snd_timer 20964 1 snd_pcm snd 49316 5 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer snd_page_alloc 9544 2 snd_hda_intel,snd_pcm soundcore 7424 1 snd $ sudo lspci -vv -s 00:1b.0 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) Subsystem: Lenovo Unknown device 20ac Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 21 Region 0: Memory at fe020000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [70] Express Unknown type IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0 Link: Latency L0s <64ns, L1 <1us Link: ASPM Disabled CommClk- ExtSynch- Link: Speed unknown, Width x0 Capabilities: [100] Virtual Channel Capabilities: [130] Unknown (5) $ cat /proc/asound/card0/codec#0 Codec: Analog Devices AD1984 Address: 0 Vendor Id: 0x11d41984 Subsystem Id: 0x17aa20d7 Revision Id: 0x100400 Default PCM: rates [0x7ff]: 8000 11025 16000 22050 32000 44100 48000 88200 96000 176400 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Default Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=0 Node 0x02 [Audio Output] wcaps 0x30311: Stereo Digital PCM: rates [0x7e0]: 44100 48000 88200 96000 176400 192000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Connection: 3 0x01* 0x08 0x09 Node 0x03 [Audio Output] wcaps 0x405: Stereo Amp-Out Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=0 Amp-Out vals: [0x80 0x80] Power: 0x0 Node 0x04 [Audio Output] wcaps 0x405: Stereo Amp-Out Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=0 Amp-Out vals: [0xa3 0xa3] Power: 0x0 Node 0x05 [Audio Input] wcaps 0x10050b: Stereo Amp-In Amp-In caps: ofs=0x27, nsteps=0x36, stepsize=0x05, mute=1 Amp-In vals: [0xa7 0xa7] Power: 0x0 Connection: 1 0x17 Node 0x06 [Audio Input] wcaps 0x10050b: Stereo Amp-In Amp-In caps: ofs=0x27, nsteps=0x36, stepsize=0x05, mute=1 Amp-In vals: [0xa7 0xa7] Power: 0x0 Connection: 1 0x18 Node 0x07 [Audio Mixer] wcaps 0x200103: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 0x22 0x21 Node 0x08 [Audio Input] wcaps 0x100501: Stereo Power: 0x0 Connection: 1 0x0c Node 0x09 [Audio Input] wcaps 0x100501: Stereo Power: 0x0 Connection: 1 0x0d Node 0x0a [Audio Mixer] wcaps 0x200103: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 0x04 0x21 Node 0x0b [Audio Mixer] wcaps 0x200103: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] Connection: 2 0x0f 0x21 Node 0x0c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x27, nsteps=0x36, stepsize=0x05, mute=1 Amp-Out vals: [0x1e 0x1e] Connection: 5 0x14* 0x15 0x16 0x20 0x25 Node 0x0d [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x27, nsteps=0x36, stepsize=0x05, mute=1 Amp-Out vals: [0xa7 0xa7] Connection: 5 0x14* 0x15 0x16 0x20 0x25 Node 0x0e [Audio Selector] wcaps 0x300101: Stereo Connection: 2 0x03 0x04* Node 0x0f [Audio Selector] wcaps 0x300101: Stereo Connection: 2 0x03* 0x04 Node 0x10 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out Amp-Out caps: ofs=0x0f, nsteps=0x0f, stepsize=0x0b, mute=1 Amp-Out vals: [0x00] Node 0x11 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x081f: OUT HP Detect Pin Default 0x0221401f: [Jack] HP Out at Ext Front Conn = 1/8, Color = Green Pin-ctls: 0xc0: OUT HP Connection: 1 0x07 Node 0x12 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x081001f: OUT HP EAPD Detect Pin Default 0x90170110: [Fixed] Speaker at Int N/A Conn = Analog, Color = Unknown Pin-ctls: 0xc0: OUT HP Power: 0x0 Connection: 1 0x0a Node 0x13 [Pin Complex] wcaps 0x40050c: Mono Amp-Out Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x00] Pincap 0x0810010: OUT EAPD Pin Default 0x511301f0: [N/A] Speaker at Int Rear Conn = ATAPI, Color = Unknown Pin-ctls: 0x40: OUT Power: 0x0 Connection: 1 0x1f Node 0x14 [Pin Complex] wcaps 0x40008b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: Pincap 0x083727: IN Detect Pin Default 0x02a15021: [Jack] Mic at Ext Front Conn = 1/8, Color = Red Pin-ctls: 0x24: IN Node 0x15 [Pin Complex] wcaps 0x40008b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: Pincap 0x083727: IN Detect Pin Default 0x90a7012e: [Fixed] Mic at Int N/A Conn = Analog, Color = Unknown Pin-ctls: 0x24: IN Node 0x16 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0837: IN OUT Detect Pin Default 0x593301f0: [N/A] CD at Int ATAPI Conn = ATAPI, Color = Unknown Pin-ctls: 0x00: Connection: 1 0x0b Node 0x17 [Pin Complex] wcaps 0x400001: Stereo Pincap 0x0820: IN Pin Default 0x55a601f0: [N/A] Mic at Int Top Conn = Digital, Color = Unknown Pin-ctls: 0x24: IN Node 0x18 [Pin Complex] wcaps 0x400001: Stereo Pincap 0x0820: IN Pin Default 0x55a601f0: [N/A] Mic at Int Top Conn = Digital, Color = Unknown Pin-ctls: 0x00: Node 0x19 [Power Widget] wcaps 0x500500: Mono Power: 0x0 Connection: 2 0x20* 0x21 Node 0x1a [Pin Complex] wcaps 0x400000: Mono Pincap 0x0820: IN Pin Default 0x91f311f0: [Fixed] Other at Int Rear Conn = ATAPI, Color = Black Pin-ctls: 0x20: IN Node 0x1b [Pin Complex] wcaps 0x40030d: Stereo Digital Amp-Out Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=1 Amp-Out vals: [0x27 0x27] Pincap 0x0810: OUT Pin Default 0x214411a0: [Jack] SPDIF Out at Sep Rear Conn = RCA, Color = Black Pin-ctls: 0x40: OUT Connection: 1 0x02 Node 0x1c [Pin Complex] wcaps 0x40018d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x083737: IN OUT Detect Pin Default 0x21a15020: [Jack] Mic at Sep Rear Conn = 1/8, Color = Red Pin-ctls: 0x24: IN Connection: 1 0x24 Node 0x1d [Vendor Defined Widget] wcaps 0xf00100: Mono Connection: 25 0x07* 0x19 0x0a 0x0b 0x0c 0x0d 0x0e 0x0f 0x1a 0x1c 0x11 0x12 0x13 0x14 0x15 0x16 0x1e 0x1f 0x20 0x21 0x22 0x23 0x24 0x25 0x26 Node 0x1e [Audio Mixer] wcaps 0x200103: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 0x0e 0x21 Node 0x1f [Audio Mixer] wcaps 0x200100: Mono Connection: 1 0x1e Node 0x20 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x80 0x80] [0x9c 0x9c] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 5 0x14 0x15 0x16 0x1a 0x25 Node 0x21 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x1f 0x1f] Connection: 1 0x20 Node 0x22 [Audio Selector] wcaps 0x300101: Stereo Connection: 2 0x03 0x04* Node 0x23 [Audio Selector] wcaps 0x300101: Stereo Connection: 2 0x03* 0x04 Node 0x24 [Audio Mixer] wcaps 0x200103: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] Connection: 2 0x23 0x21 Node 0x25 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Connection: 1 0x1c Node 0x26 [Vendor Defined Widget] wcaps 0xf00100: Mono Connection: 3 0x14* 0x15 0x1c

2 2