- Alsa-devel - mailman.alsa-project.org

[alsa-devel] Impact of SW on USB Audio?
by Pavel Hofman 12 Jun '08

12 Jun '08

Hi, Please excuse my non-devel question but the most knowledgeable people read this mailing list. Can user-space software (regular players) directly influence quality of USB adaptive audio output? IOW, how sensitive is adaptive USB to the rhythm of the data infeed to the USB controller? I understand for standard PCI soundcards it is all only about timely delivery of enough data to DMA memory,the card takes care of the rest itself. Do USB controllers shield applications from the rest in the same manner? The adaptive mode is sensitive to jitter of the data stream from the USB controller to the receiver. Can SW players influence the jitter, e.g. by moving the wav files from HDD to RAM disk etc.? I assume a lightly loaded system with no major data delays. Thanks a lot for any insight, I could not google-out any relevant information. Regards, Pavel.

2 2

[alsa-devel] [ANNOUNCE] ALSA scenario manager library
by Liam Girdwood 11 Jun '08

11 Jun '08

I've now released the first version (v0.1) of an ALSA scenario (or use case) manager. It's currently a stand alone library that can either be linked against alsa-lib or salsa (not tested - afaik I've not used any alsa-lib only symbols). This library is designed to provide userspace applications (e.g. Pulse Audio) with a generic API to change the audio *hardware* scenario or use case. Features:- * scenario get() and set() * scenario list() * scenario dump() (dumps all sound card control settings) * mixer aliasing (master hardware volumes and switches can be found in each scenario - they may be different kcontrols) API header is here :- http://opensource.wolfsonmicro.com/cgi-bin/gitweb.cgi?p=alsa-scenario;a=blo… The library saves each scenario in a simple file i.e. 1:'Master Playback Switch':1:1 2:'Master Playback Volume':2:0,0 3:'Headphone Playback Switch':1:1 4:'Headphone Playback Volume':2:17,17 This differs from the format used by alsactl in order to support salsa-lib. There is a utility called scndump (in the examples directory) to dump the sound cards current state in this format. Each sound card also needs a master file describing supported scenario information i.e. # Test scenario configuration for Machine X # Author: Joe Bloggs <joe(a)bloggs.com> # lines beginning with # are comments Section "Scenario" # scenario unique name (mandatory) Identifier = "playback speaker" # scenario file name (mandatory) File = "playback_spk" # scenario audio quality of service (optional) - HIFI, VOICE or SYSTEM QoS = HIFI # alias for master playback volume (optional) MasterPlaybackVolume = 8 # alias for master playback switch (optional) MasterPlaybackSwitch = 2 # alias for master capture volume (optional) MasterCaptureVolume = 3 # alias for master capture switch (optional) MasterCaptureSwitch = 4 EndSection Section "Scenario" # scenario unique name (mandatory) Identifier = "playback headphones" # scenario file name (mandatory) File = "playback_hp" # scenario audio quality of service (optional) - HIFI, VOICE or SYSTEM QoS = HIFI # alias for master playback volume (optional) MasterPlaybackVolume = 10 # alias for master playback switch (optional) MasterPlaybackSwitch = 20 # alias for master capture volume (optional) MasterCaptureVolume = 30 # alias for master capture switch (optional) MasterCaptureSwitch = 40 EndSection This file provides information to the library about each supported scenario. The library needs both a master file and scenario kcontrol files in order to change between scenarios. There is still some work todo (i.e QoS, locking, auto* cleanup, sequencer, etc) and it obviously needs more testing and cleanup. I'm not really in the position to continue working on this in the near future. Ideally, it would be good to have another developer(s) with spare time involved. I can provide git access. Fwiw, I'd ideally like to merge this into alsa-lib and salsa when things are mature. It useful code for embedded devices and laptops (maybe PC's too). Source tarball is here :- http://opensource.wolfsonmicro.com/~lg/alsa-scenario/scenario-lib-0.1.0.tar… Git here :- http://opensource.wolfsonmicro.com/cgi-bin/gitweb.cgi?p=alsa-scenario;a=sum… More info here :- http://opensource.wolfsonmicro.com/node/14 Feedback and patches welcome. Liam

2 1

[alsa-devel] period time in async handler
by Tim Pushor 11 Jun '08

11 Jun '08

Hi Friends, I have a need to have an audio player kick off things at various points of time through playback of an audio file. I'm trying to hack aplay as a proof of concept. If I understand correctly, the asynchronous handler seems to do what I want. I hacked in a handler to aplay and it works, but not quite like how I expected. I counted the number of times that the handler got called, and thought that if I multiplied that by the period time that I'd end up with the total audio length but that doesn't seem to be the case. I was under the assumption that the handler was called once per period. I must not understand the relationship of the asynchronous handler and period_time. Does this make sense? Am I going about this all wrong? Thanks, Tim

2 1

[alsa-devel] [PATCH 01/10] ASoC: Fix register cache sizes for Wolfson codecs
by Mark Brown 11 Jun '08

11 Jun '08

The register cache size is used by the codec_reg sysfs file which works in terms of the register cache access functions rather than in terms of raw access to the cache so the size specified needs to be in terms of the number of elements. Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/wm8731.c | 2 +- sound/soc/codecs/wm8750.c | 2 +- sound/soc/codecs/wm8753.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c index 5acf43a..7788053 100644 --- a/sound/soc/codecs/wm8731.c +++ b/sound/soc/codecs/wm8731.c @@ -534,7 +534,7 @@ static int wm8731_init(struct snd_soc_device *socdev) codec->set_bias_level = wm8731_set_bias_level; codec->dai = &wm8731_dai; codec->num_dai = 1; - codec->reg_cache_size = sizeof(wm8731_reg); + codec->reg_cache_size = ARRAY_SIZE(wm8731_reg); codec->reg_cache = kmemdup(wm8731_reg, sizeof(wm8731_reg), GFP_KERNEL); if (codec->reg_cache == NULL) return -ENOMEM; diff --git a/sound/soc/codecs/wm8750.c b/sound/soc/codecs/wm8750.c index 1f11ad2..1ae670a 100644 --- a/sound/soc/codecs/wm8750.c +++ b/sound/soc/codecs/wm8750.c @@ -798,7 +798,7 @@ static int wm8750_init(struct snd_soc_device *socdev) codec->set_bias_level = wm8750_set_bias_level; codec->dai = &wm8750_dai; codec->num_dai = 1; - codec->reg_cache_size = sizeof(wm8750_reg); + codec->reg_cache_size = ARRAY_SIZE(wm8750_reg); codec->reg_cache = kmemdup(wm8750_reg, sizeof(wm8750_reg), GFP_KERNEL); if (codec->reg_cache == NULL) return -ENOMEM; diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c index c32e632..285c5ea 100644 --- a/sound/soc/codecs/wm8753.c +++ b/sound/soc/codecs/wm8753.c @@ -1557,7 +1557,7 @@ static int wm8753_init(struct snd_soc_device *socdev) codec->set_bias_level = wm8753_set_bias_level; codec->dai = wm8753_dai; codec->num_dai = 2; - codec->reg_cache_size = sizeof(wm8753_reg); + codec->reg_cache_size = ARRAY_SIZE(wm8753_reg); codec->reg_cache = kmemdup(wm8753_reg, sizeof(wm8753_reg), GFP_KERNEL); if (codec->reg_cache == NULL) -- 1.5.5.3

3 11

[alsa-devel] GIT tree usage.
by Rene Herman 11 Jun '08

11 Jun '08

Good day. I have been using Takashi's "sound-2.6" GIT repo: git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git for pulling current ALSA (branch master) into the stock kernel tree and while rebuilding stuff thought I'd try switching to the official ALSA GIT repo(s). I'd like to make sure that I am now using the right trees and branches... I start out locally with a fresh linus clone: $ git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 local and then want to pull latest ALSA into it: $ git remote add alsa git://git.alsa-project.org/alsa-kernel.git $ git remote show alsa * remote alsa URL: git://git.alsa-project.org/alsa-kernel.git Tracked remote branches for-linus linux-2.6 master $ git checkout -b current $ git merge alsa/master Am I using the right tree and branch for this? And is this branch being rebased? Rene.

2 2

[alsa-devel] [PATCH 2/2] opti93x: use cs4231 lib
by Krzysztof Helt 11 Jun '08

11 Jun '08

From: Krzysztof Helt <krzysztof.h1(a)wp.pl> This patch converts the Opti93x driver to use the cs4231 library instead of duplicating the code. Signed-off-by: Krzysztof Helt <krzysztof.h1(a)wp.pl> --- This patch requires the patch which adds opti93x support to the cs4231 library. It saves few hundreds LOCs. This patch was sent some time ago. It should work now on Opti93x. The patch was prepared against the 2.6.26-rc5 kernel. Tested on Opti 930, 931 and 933. The previous repost: http://mailman.alsa-project.org/pipermail/alsa-devel/2008-January/005680.ht… diff -urp linux-rc2/sound/isa/Kconfig linux-rc5/sound/isa/Kconfig --- linux-rc2/sound/isa/Kconfig 2008-04-17 04:49:44.000000000 +0200 +++ linux-rc5/sound/isa/Kconfig 2008-06-08 00:43:27.704186772 +0200 @@ -321,7 +321,7 @@ config SND_OPTI93X depends on SND select SND_OPL3_LIB select SND_MPU401_UART - select SND_PCM + select SND_CS4231_LIB help Say Y here to include support for soundcards based on Opti 82C93x chips. diff -urp linux-rc2/sound/isa/opti9xx/opti92x-ad1848.c linux-rc5/sound/isa/opti9xx/opti92x-ad1848.c --- linux-rc2/sound/isa/opti9xx/opti92x-ad1848.c 2008-06-08 01:08:48.186548901 +0200 +++ linux-rc5/sound/isa/opti9xx/opti92x-ad1848.c 2008-06-08 10:42:36.915336562 +0200 @@ -33,15 +33,10 @@ #include <asm/io.h> #include <asm/dma.h> #include <sound/core.h> -#ifdef CS4231 +#if defined(CS4231) || defined(OPTi93X) #include <sound/cs4231.h> #else -#ifndef OPTi93X #include <sound/ad1848.h> -#else -#include <sound/control.h> -#include <sound/pcm.h> -#endif /* OPTi93X */ #endif /* CS4231 */ #include <sound/mpu401.h> #include <sound/opl3.h> @@ -109,7 +104,6 @@ module_param(dma2, int, 0444); MODULE_PARM_DESC(dma2, "2nd dma # for opti9xx driver."); #endif /* CS4231 || OPTi93X */ -#define OPTi9XX_HW_DETECT 0 #define OPTi9XX_HW_82C928 1 #define OPTi9XX_HW_82C929 2 #define OPTi9XX_HW_82C924 3 @@ -123,105 +117,12 @@ MODULE_PARM_DESC(dma2, "2nd dma # for op #ifdef OPTi93X -#define OPTi93X_INDEX 0x00 -#define OPTi93X_DATA 0x01 #define OPTi93X_STATUS 0x02 -#define OPTi93X_DDATA 0x03 #define OPTi93X_PORT(chip, r) ((chip)->port + OPTi93X_##r) -#define OPTi93X_MIXOUT_LEFT 0x00 -#define OPTi93X_MIXOUT_RIGHT 0x01 -#define OPTi93X_CD_LEFT_INPUT 0x02 -#define OPTi93X_CD_RIGHT_INPUT 0x03 -#define OPTi930_AUX_LEFT_INPUT 0x04 -#define OPTi930_AUX_RIGHT_INPUT 0x05 -#define OPTi931_FM_LEFT_INPUT 0x04 -#define OPTi931_FM_RIGHT_INPUT 0x05 -#define OPTi93X_DAC_LEFT 0x06 -#define OPTi93X_DAC_RIGHT 0x07 -#define OPTi93X_PLAY_FORMAT 0x08 -#define OPTi93X_IFACE_CONF 0x09 -#define OPTi93X_PIN_CTRL 0x0a -#define OPTi93X_ERR_INIT 0x0b -#define OPTi93X_ID 0x0c -#define OPTi93X_PLAY_UPR_CNT 0x0e -#define OPTi93X_PLAY_LWR_CNT 0x0f -#define OPTi931_AUX_LEFT_INPUT 0x10 -#define OPTi931_AUX_RIGHT_INPUT 0x11 -#define OPTi93X_LINE_LEFT_INPUT 0x12 -#define OPTi93X_LINE_RIGHT_INPUT 0x13 -#define OPTi93X_MIC_LEFT_INPUT 0x14 -#define OPTi93X_MIC_RIGHT_INPUT 0x15 -#define OPTi93X_OUT_LEFT 0x16 -#define OPTi93X_OUT_RIGHT 0x17 -#define OPTi93X_CAPT_FORMAT 0x1c -#define OPTi93X_CAPT_UPR_CNT 0x1e -#define OPTi93X_CAPT_LWR_CNT 0x1f - -#define OPTi93X_TRD 0x20 -#define OPTi93X_MCE 0x40 -#define OPTi93X_INIT 0x80 - -#define OPTi93X_MIXOUT_MIC_GAIN 0x20 -#define OPTi93X_MIXOUT_LINE 0x00 -#define OPTi93X_MIXOUT_CD 0x40 -#define OPTi93X_MIXOUT_MIC 0x80 -#define OPTi93X_MIXOUT_MIXER 0xc0 - -#define OPTi93X_STEREO 0x10 -#define OPTi93X_LINEAR_8 0x00 -#define OPTi93X_ULAW_8 0x20 -#define OPTi93X_LINEAR_16_LIT 0x40 -#define OPTi93X_ALAW_8 0x60 -#define OPTi93X_ADPCM_16 0xa0 -#define OPTi93X_LINEAR_16_BIG 0xc0 - -#define OPTi93X_CAPTURE_PIO 0x80 -#define OPTi93X_PLAYBACK_PIO 0x40 -#define OPTi93X_AUTOCALIB 0x08 -#define OPTi93X_SINGLE_DMA 0x04 -#define OPTi93X_CAPTURE_ENABLE 0x02 -#define OPTi93X_PLAYBACK_ENABLE 0x01 - -#define OPTi93X_IRQ_ENABLE 0x02 - -#define OPTi93X_DMA_REQUEST 0x10 -#define OPTi93X_CALIB_IN_PROGRESS 0x20 - #define OPTi93X_IRQ_PLAYBACK 0x04 #define OPTi93X_IRQ_CAPTURE 0x08 - -struct snd_opti93x { - unsigned long port; - struct resource *res_port; - int irq; - int dma1; - int dma2; - - struct snd_opti9xx *chip; - unsigned short hardware; - unsigned char image[32]; - - unsigned char mce_bit; - unsigned short mode; - int mute; - - spinlock_t lock; - - struct snd_card *card; - struct snd_pcm *pcm; - struct snd_pcm_substream *playback_substream; - struct snd_pcm_substream *capture_substream; - unsigned int p_dma_size; - unsigned int c_dma_size; -}; - -#define OPTi93X_MODE_NONE 0x00 -#define OPTi93X_MODE_PLAY 0x01 -#define OPTi93X_MODE_CAPTURE 0x02 -#define OPTi93X_MODE_OPEN (OPTi93X_MODE_PLAY | OPTi93X_MODE_CAPTURE) - #endif /* OPTi93X */ struct snd_opti9xx { @@ -234,6 +135,7 @@ struct snd_opti9xx { unsigned long mc_base_size; #ifdef OPTi93X unsigned long mc_indir_index; + struct snd_cs4231 *codec; #endif /* OPTi93X */ unsigned long pwd_reg; @@ -654,979 +556,23 @@ __skip_mpu: #ifdef OPTi93X -static unsigned char snd_opti93x_default_image[32] = -{ - 0x00, /* 00/00 - l_mixout_outctrl */ - 0x00, /* 01/01 - r_mixout_outctrl */ - 0x88, /* 02/02 - l_cd_inctrl */ - 0x88, /* 03/03 - r_cd_inctrl */ - 0x88, /* 04/04 - l_a1/fm_inctrl */ - 0x88, /* 05/05 - r_a1/fm_inctrl */ - 0x80, /* 06/06 - l_dac_inctrl */ - 0x80, /* 07/07 - r_dac_inctrl */ - 0x00, /* 08/08 - ply_dataform_reg */ - 0x00, /* 09/09 - if_conf */ - 0x00, /* 0a/10 - pin_ctrl */ - 0x00, /* 0b/11 - err_init_reg */ - 0x0a, /* 0c/12 - id_reg */ - 0x00, /* 0d/13 - reserved */ - 0x00, /* 0e/14 - ply_upcount_reg */ - 0x00, /* 0f/15 - ply_lowcount_reg */ - 0x88, /* 10/16 - reserved/l_a1_inctrl */ - 0x88, /* 11/17 - reserved/r_a1_inctrl */ - 0x88, /* 12/18 - l_line_inctrl */ - 0x88, /* 13/19 - r_line_inctrl */ - 0x88, /* 14/20 - l_mic_inctrl */ - 0x88, /* 15/21 - r_mic_inctrl */ - 0x80, /* 16/22 - l_out_outctrl */ - 0x80, /* 17/23 - r_out_outctrl */ - 0x00, /* 18/24 - reserved */ - 0x00, /* 19/25 - reserved */ - 0x00, /* 1a/26 - reserved */ - 0x00, /* 1b/27 - reserved */ - 0x00, /* 1c/28 - cap_dataform_reg */ - 0x00, /* 1d/29 - reserved */ - 0x00, /* 1e/30 - cap_upcount_reg */ - 0x00 /* 1f/31 - cap_lowcount_reg */ -}; - - -static int snd_opti93x_busy_wait(struct snd_opti93x *chip) -{ - int timeout; - - for (timeout = 250; timeout-- > 0; udelay(10)) - if (!(inb(OPTi93X_PORT(chip, INDEX)) & OPTi93X_INIT)) - return 0; - - snd_printk("chip still busy.\n"); - return -EBUSY; -} - -static unsigned char snd_opti93x_in(struct snd_opti93x *chip, unsigned char reg) -{ - snd_opti93x_busy_wait(chip); - outb(chip->mce_bit | (reg & 0x1f), OPTi93X_PORT(chip, INDEX)); - return inb(OPTi93X_PORT(chip, DATA)); -} - -static void snd_opti93x_out(struct snd_opti93x *chip, unsigned char reg, - unsigned char value) -{ - snd_opti93x_busy_wait(chip); - outb(chip->mce_bit | (reg & 0x1f), OPTi93X_PORT(chip, INDEX)); - outb(value, OPTi93X_PORT(chip, DATA)); -} - -static void snd_opti93x_out_image(struct snd_opti93x *chip, unsigned char reg, - unsigned char value) -{ - snd_opti93x_out(chip, reg, chip->image[reg] = value); -} - -static void snd_opti93x_out_mask(struct snd_opti93x *chip, unsigned char reg, - unsigned char mask, unsigned char value) -{ - snd_opti93x_out_image(chip, reg, - (chip->image[reg] & ~mask) | (value & mask)); -} - - -static void snd_opti93x_mce_up(struct snd_opti93x *chip) -{ - snd_opti93x_busy_wait(chip); - - chip->mce_bit = OPTi93X_MCE; - if (!(inb(OPTi93X_PORT(chip, INDEX)) & OPTi93X_MCE)) - outb(chip->mce_bit, OPTi93X_PORT(chip, INDEX)); -} - -static void snd_opti93x_mce_down(struct snd_opti93x *chip) -{ - snd_opti93x_busy_wait(chip); - - chip->mce_bit = 0; - if (inb(OPTi93X_PORT(chip, INDEX)) & OPTi93X_MCE) - outb(chip->mce_bit, OPTi93X_PORT(chip, INDEX)); -} - -#define snd_opti93x_mute_reg(chip, reg, mute) \ - snd_opti93x_out(chip, reg, mute ? 0x80 : chip->image[reg]); - -static void snd_opti93x_mute(struct snd_opti93x *chip, int mute) -{ - mute = mute ? 1 : 0; - if (chip->mute == mute) - return; - - chip->mute = mute; - - snd_opti93x_mute_reg(chip, OPTi93X_CD_LEFT_INPUT, mute); - snd_opti93x_mute_reg(chip, OPTi93X_CD_RIGHT_INPUT, mute); - switch (chip->hardware) { - case OPTi9XX_HW_82C930: - snd_opti93x_mute_reg(chip, OPTi930_AUX_LEFT_INPUT, mute); - snd_opti93x_mute_reg(chip, OPTi930_AUX_RIGHT_INPUT, mute); - break; - case OPTi9XX_HW_82C931: - case OPTi9XX_HW_82C933: - snd_opti93x_mute_reg(chip, OPTi931_FM_LEFT_INPUT, mute); - snd_opti93x_mute_reg(chip, OPTi931_FM_RIGHT_INPUT, mute); - snd_opti93x_mute_reg(chip, OPTi931_AUX_LEFT_INPUT, mute); - snd_opti93x_mute_reg(chip, OPTi931_AUX_RIGHT_INPUT, mute); - } - snd_opti93x_mute_reg(chip, OPTi93X_DAC_LEFT, mute); - snd_opti93x_mute_reg(chip, OPTi93X_DAC_RIGHT, mute); - snd_opti93x_mute_reg(chip, OPTi93X_LINE_LEFT_INPUT, mute); - snd_opti93x_mute_reg(chip, OPTi93X_LINE_RIGHT_INPUT, mute); - snd_opti93x_mute_reg(chip, OPTi93X_MIC_LEFT_INPUT, mute); - snd_opti93x_mute_reg(chip, OPTi93X_MIC_RIGHT_INPUT, mute); - snd_opti93x_mute_reg(chip, OPTi93X_OUT_LEFT, mute); - snd_opti93x_mute_reg(chip, OPTi93X_OUT_RIGHT, mute); -} - - -static unsigned int snd_opti93x_get_count(unsigned char format, - unsigned int size) -{ - switch (format & 0xe0) { - case OPTi93X_LINEAR_16_LIT: - case OPTi93X_LINEAR_16_BIG: - size >>= 1; - break; - case OPTi93X_ADPCM_16: - return size >> 2; - } - return (format & OPTi93X_STEREO) ? (size >> 1) : size; -} - -static unsigned int rates[] = { 5512, 6615, 8000, 9600, 11025, 16000, - 18900, 22050, 27428, 32000, 33075, 37800, - 44100, 48000 }; -#define RATES ARRAY_SIZE(rates) - -static struct snd_pcm_hw_constraint_list hw_constraints_rates = { - .count = RATES, - .list = rates, - .mask = 0, -}; - -static unsigned char bits[] = { 0x01, 0x0f, 0x00, 0x0e, 0x03, 0x02, - 0x05, 0x07, 0x04, 0x06, 0x0d, 0x09, - 0x0b, 0x0c}; - -static unsigned char snd_opti93x_get_freq(unsigned int rate) -{ - unsigned int i; - - for (i = 0; i < RATES; i++) { - if (rate == rates[i]) - return bits[i]; - } - snd_BUG(); - return bits[RATES-1]; -} - -static unsigned char snd_opti93x_get_format(struct snd_opti93x *chip, - unsigned int format, int channels) -{ - unsigned char retval = OPTi93X_LINEAR_8; - - switch (format) { - case SNDRV_PCM_FORMAT_MU_LAW: - retval = OPTi93X_ULAW_8; - break; - case SNDRV_PCM_FORMAT_A_LAW: - retval = OPTi93X_ALAW_8; - break; - case SNDRV_PCM_FORMAT_S16_LE: - retval = OPTi93X_LINEAR_16_LIT; - break; - case SNDRV_PCM_FORMAT_S16_BE: - retval = OPTi93X_LINEAR_16_BIG; - break; - case SNDRV_PCM_FORMAT_IMA_ADPCM: - retval = OPTi93X_ADPCM_16; - } - return (channels > 1) ? (retval | OPTi93X_STEREO) : retval; -} - - -static void snd_opti93x_playback_format(struct snd_opti93x *chip, unsigned char fmt) -{ - unsigned char mask; - - snd_opti93x_mute(chip, 1); - - snd_opti93x_mce_up(chip); - mask = (chip->mode & OPTi93X_MODE_CAPTURE) ? 0xf0 : 0xff; - snd_opti93x_out_mask(chip, OPTi93X_PLAY_FORMAT, mask, fmt); - snd_opti93x_mce_down(chip); - - snd_opti93x_mute(chip, 0); -} - -static void snd_opti93x_capture_format(struct snd_opti93x *chip, unsigned char fmt) -{ - snd_opti93x_mute(chip, 1); - - snd_opti93x_mce_up(chip); - if (!(chip->mode & OPTi93X_MODE_PLAY)) - snd_opti93x_out_mask(chip, OPTi93X_PLAY_FORMAT, 0x0f, fmt); - else - fmt = chip->image[OPTi93X_PLAY_FORMAT] & 0xf0; - snd_opti93x_out_image(chip, OPTi93X_CAPT_FORMAT, fmt); - snd_opti93x_mce_down(chip); - - snd_opti93x_mute(chip, 0); -} - - -static int snd_opti93x_open(struct snd_opti93x *chip, unsigned int mode) -{ - unsigned long flags; - - spin_lock_irqsave(&chip->lock, flags); - - if (chip->mode & mode) { - spin_unlock_irqrestore(&chip->lock, flags); - return -EAGAIN; - } - - if (!(chip->mode & OPTi93X_MODE_OPEN)) { - outb(0x00, OPTi93X_PORT(chip, STATUS)); - snd_opti93x_out_mask(chip, OPTi93X_PIN_CTRL, - OPTi93X_IRQ_ENABLE, OPTi93X_IRQ_ENABLE); - chip->mode = mode; - } - else - chip->mode |= mode; - - spin_unlock_irqrestore(&chip->lock, flags); - return 0; -} - -static void snd_opti93x_close(struct snd_opti93x *chip, unsigned int mode) -{ - unsigned long flags; - - spin_lock_irqsave(&chip->lock, flags); - - chip->mode &= ~mode; - if (chip->mode & OPTi93X_MODE_OPEN) { - spin_unlock_irqrestore(&chip->lock, flags); - return; - } - - snd_opti93x_mute(chip, 1); - - outb(0, OPTi93X_PORT(chip, STATUS)); - snd_opti93x_out_mask(chip, OPTi93X_PIN_CTRL, OPTi93X_IRQ_ENABLE, - ~OPTi93X_IRQ_ENABLE); - - snd_opti93x_mce_up(chip); - snd_opti93x_out_image(chip, OPTi93X_IFACE_CONF, 0x00); - snd_opti93x_mce_down(chip); - chip->mode = 0; - - snd_opti93x_mute(chip, 0); - spin_unlock_irqrestore(&chip->lock, flags); -} - -static int snd_opti93x_trigger(struct snd_pcm_substream *substream, - unsigned char what, int cmd) -{ - struct snd_opti93x *chip = snd_pcm_substream_chip(substream); - - switch (cmd) { - case SNDRV_PCM_TRIGGER_START: - case SNDRV_PCM_TRIGGER_STOP: - { - unsigned int what = 0; - struct snd_pcm_substream *s; - snd_pcm_group_for_each_entry(s, substream) { - if (s == chip->playback_substream) { - what |= OPTi93X_PLAYBACK_ENABLE; - snd_pcm_trigger_done(s, substream); - } else if (s == chip->capture_substream) { - what |= OPTi93X_CAPTURE_ENABLE; - snd_pcm_trigger_done(s, substream); - } - } - spin_lock(&chip->lock); - if (cmd == SNDRV_PCM_TRIGGER_START) { - snd_opti93x_out_mask(chip, OPTi93X_IFACE_CONF, what, what); - if (what & OPTi93X_CAPTURE_ENABLE) - udelay(50); - } else - snd_opti93x_out_mask(chip, OPTi93X_IFACE_CONF, what, 0x00); - spin_unlock(&chip->lock); - break; - } - default: - return -EINVAL; - } - return 0; -} - -static int snd_opti93x_playback_trigger(struct snd_pcm_substream *substream, int cmd) -{ - return snd_opti93x_trigger(substream, - OPTi93X_PLAYBACK_ENABLE, cmd); -} - -static int snd_opti93x_capture_trigger(struct snd_pcm_substream *substream, int cmd) -{ - return snd_opti93x_trigger(substream, - OPTi93X_CAPTURE_ENABLE, cmd); -} - -static int snd_opti93x_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *hw_params) -{ - return snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(hw_params)); -} - - -static int snd_opti93x_hw_free(struct snd_pcm_substream *substream) -{ - snd_pcm_lib_free_pages(substream); - return 0; -} - - -static int snd_opti93x_playback_prepare(struct snd_pcm_substream *substream) -{ - struct snd_opti93x *chip = snd_pcm_substream_chip(substream); - struct snd_pcm_runtime *runtime = substream->runtime; - unsigned long flags; - unsigned char format; - unsigned int count = snd_pcm_lib_period_bytes(substream); - unsigned int size = snd_pcm_lib_buffer_bytes(substream); - - spin_lock_irqsave(&chip->lock, flags); - - chip->p_dma_size = size; - snd_opti93x_out_mask(chip, OPTi93X_IFACE_CONF, - OPTi93X_PLAYBACK_ENABLE | OPTi93X_PLAYBACK_PIO, - ~(OPTi93X_PLAYBACK_ENABLE | OPTi93X_PLAYBACK_PIO)); - - snd_dma_program(chip->dma1, runtime->dma_addr, size, - DMA_MODE_WRITE | DMA_AUTOINIT); - - format = snd_opti93x_get_freq(runtime->rate); - format |= snd_opti93x_get_format(chip, runtime->format, - runtime->channels); - snd_opti93x_playback_format(chip, format); - format = chip->image[OPTi93X_PLAY_FORMAT]; - - count = snd_opti93x_get_count(format, count) - 1; - snd_opti93x_out_image(chip, OPTi93X_PLAY_LWR_CNT, count); - snd_opti93x_out_image(chip, OPTi93X_PLAY_UPR_CNT, count >> 8); - - spin_unlock_irqrestore(&chip->lock, flags); - return 0; -} - -static int snd_opti93x_capture_prepare(struct snd_pcm_substream *substream) -{ - struct snd_opti93x *chip = snd_pcm_substream_chip(substream); - struct snd_pcm_runtime *runtime = substream->runtime; - unsigned long flags; - unsigned char format; - unsigned int count = snd_pcm_lib_period_bytes(substream); - unsigned int size = snd_pcm_lib_buffer_bytes(substream); - - spin_lock_irqsave(&chip->lock, flags); - - chip->c_dma_size = size; - snd_opti93x_out_mask(chip, OPTi93X_IFACE_CONF, - OPTi93X_CAPTURE_ENABLE | OPTi93X_CAPTURE_PIO, 0); - - snd_dma_program(chip->dma2, runtime->dma_addr, size, - DMA_MODE_READ | DMA_AUTOINIT); - - format = snd_opti93x_get_freq(runtime->rate); - format |= snd_opti93x_get_format(chip, runtime->format, - runtime->channels); - snd_opti93x_capture_format(chip, format); - format = chip->image[OPTi93X_CAPT_FORMAT]; - - count = snd_opti93x_get_count(format, count) - 1; - snd_opti93x_out_image(chip, OPTi93X_CAPT_LWR_CNT, count); - snd_opti93x_out_image(chip, OPTi93X_CAPT_UPR_CNT, count >> 8); - - spin_unlock_irqrestore(&chip->lock, flags); - return 0; -} - -static snd_pcm_uframes_t snd_opti93x_playback_pointer(struct snd_pcm_substream *substream) -{ - struct snd_opti93x *chip = snd_pcm_substream_chip(substream); - size_t ptr; - - if (!(chip->image[OPTi93X_IFACE_CONF] & OPTi93X_PLAYBACK_ENABLE)) - return 0; - - ptr = snd_dma_pointer(chip->dma1, chip->p_dma_size); - return bytes_to_frames(substream->runtime, ptr); -} - -static snd_pcm_uframes_t snd_opti93x_capture_pointer(struct snd_pcm_substream *substream) -{ - struct snd_opti93x *chip = snd_pcm_substream_chip(substream); - size_t ptr; - - if (!(chip->image[OPTi93X_IFACE_CONF] & OPTi93X_CAPTURE_ENABLE)) - return 0; - - ptr = snd_dma_pointer(chip->dma2, chip->c_dma_size); - return bytes_to_frames(substream->runtime, ptr); -} - - -static void snd_opti93x_overrange(struct snd_opti93x *chip) -{ - unsigned long flags; - - spin_lock_irqsave(&chip->lock, flags); - - if (snd_opti93x_in(chip, OPTi93X_ERR_INIT) & (0x08 | 0x02)) - chip->capture_substream->runtime->overrange++; - - spin_unlock_irqrestore(&chip->lock, flags); -} - static irqreturn_t snd_opti93x_interrupt(int irq, void *dev_id) { - struct snd_opti93x *codec = dev_id; + struct snd_cs4231 *codec = dev_id; + struct snd_opti9xx *chip = codec->card->private_data; unsigned char status; - status = snd_opti9xx_read(codec->chip, OPTi9XX_MC_REG(11)); + status = snd_opti9xx_read(chip, OPTi9XX_MC_REG(11)); if ((status & OPTi93X_IRQ_PLAYBACK) && codec->playback_substream) snd_pcm_period_elapsed(codec->playback_substream); if ((status & OPTi93X_IRQ_CAPTURE) && codec->capture_substream) { - snd_opti93x_overrange(codec); + snd_cs4231_overrange(codec); snd_pcm_period_elapsed(codec->capture_substream); } outb(0x00, OPTi93X_PORT(codec, STATUS)); return IRQ_HANDLED; } - -static struct snd_pcm_hardware snd_opti93x_playback = { - .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | - SNDRV_PCM_INFO_MMAP_VALID | SNDRV_PCM_INFO_SYNC_START), - .formats = (SNDRV_PCM_FMTBIT_MU_LAW | SNDRV_PCM_FMTBIT_A_LAW | SNDRV_PCM_FMTBIT_IMA_ADPCM | - SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE), - .rates = SNDRV_PCM_RATE_KNOT | SNDRV_PCM_RATE_8000_48000, - .rate_min = 5512, - .rate_max = 48000, - .channels_min = 1, - .channels_max = 2, - .buffer_bytes_max = (128*1024), - .period_bytes_min = 64, - .period_bytes_max = (128*1024), - .periods_min = 1, - .periods_max = 1024, - .fifo_size = 0, -}; - -static struct snd_pcm_hardware snd_opti93x_capture = { - .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | - SNDRV_PCM_INFO_MMAP_VALID | SNDRV_PCM_INFO_SYNC_START), - .formats = (SNDRV_PCM_FMTBIT_MU_LAW | SNDRV_PCM_FMTBIT_A_LAW | SNDRV_PCM_FMTBIT_IMA_ADPCM | - SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE), - .rates = SNDRV_PCM_RATE_8000_48000, - .rate_min = 5512, - .rate_max = 48000, - .channels_min = 1, - .channels_max = 2, - .buffer_bytes_max = (128*1024), - .period_bytes_min = 64, - .period_bytes_max = (128*1024), - .periods_min = 1, - .periods_max = 1024, - .fifo_size = 0, -}; - -static int snd_opti93x_playback_open(struct snd_pcm_substream *substream) -{ - int error; - struct snd_opti93x *chip = snd_pcm_substream_chip(substream); - struct snd_pcm_runtime *runtime = substream->runtime; - - if ((error = snd_opti93x_open(chip, OPTi93X_MODE_PLAY)) < 0) - return error; - snd_pcm_set_sync(substream); - chip->playback_substream = substream; - runtime->hw = snd_opti93x_playback; - snd_pcm_limit_isa_dma_size(chip->dma1, &runtime->hw.buffer_bytes_max); - snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE, &hw_constraints_rates); - return error; -} - -static int snd_opti93x_capture_open(struct snd_pcm_substream *substream) -{ - int error; - struct snd_opti93x *chip = snd_pcm_substream_chip(substream); - struct snd_pcm_runtime *runtime = substream->runtime; - - if ((error = snd_opti93x_open(chip, OPTi93X_MODE_CAPTURE)) < 0) - return error; - runtime->hw = snd_opti93x_capture; - snd_pcm_set_sync(substream); - chip->capture_substream = substream; - snd_pcm_limit_isa_dma_size(chip->dma2, &runtime->hw.buffer_bytes_max); - snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE, &hw_constraints_rates); - return error; -} - -static int snd_opti93x_playback_close(struct snd_pcm_substream *substream) -{ - struct snd_opti93x *chip = snd_pcm_substream_chip(substream); - - chip->playback_substream = NULL; - snd_opti93x_close(chip, OPTi93X_MODE_PLAY); - return 0; -} - -static int snd_opti93x_capture_close(struct snd_pcm_substream *substream) -{ - struct snd_opti93x *chip = snd_pcm_substream_chip(substream); - - chip->capture_substream = NULL; - snd_opti93x_close(chip, OPTi93X_MODE_CAPTURE); - return 0; -} - - -static void snd_opti93x_init(struct snd_opti93x *chip) -{ - unsigned long flags; - int i; - - spin_lock_irqsave(&chip->lock, flags); - snd_opti93x_mce_up(chip); - - for (i = 0; i < 32; i++) - snd_opti93x_out_image(chip, i, snd_opti93x_default_image[i]); - - snd_opti93x_mce_down(chip); - spin_unlock_irqrestore(&chip->lock, flags); -} - -static int snd_opti93x_probe(struct snd_opti93x *chip) -{ - unsigned long flags; - unsigned char val; - - spin_lock_irqsave(&chip->lock, flags); - val = snd_opti93x_in(chip, OPTi93X_ID) & 0x0f; - spin_unlock_irqrestore(&chip->lock, flags); - - return (val == 0x0a) ? 0 : -ENODEV; -} - -static int snd_opti93x_free(struct snd_opti93x *chip) -{ - release_and_free_resource(chip->res_port); - if (chip->dma1 >= 0) { - disable_dma(chip->dma1); - free_dma(chip->dma1); - } - if (chip->dma2 >= 0) { - disable_dma(chip->dma2); - free_dma(chip->dma2); - } - if (chip->irq >= 0) { - free_irq(chip->irq, chip); - } - kfree(chip); - return 0; -} - -static int snd_opti93x_dev_free(struct snd_device *device) -{ - struct snd_opti93x *chip = device->device_data; - return snd_opti93x_free(chip); -} - -static const char *snd_opti93x_chip_id(struct snd_opti93x *codec) -{ - switch (codec->hardware) { - case OPTi9XX_HW_82C930: return "82C930"; - case OPTi9XX_HW_82C931: return "82C931"; - case OPTi9XX_HW_82C933: return "82C933"; - default: return "???"; - } -} - -static int snd_opti93x_create(struct snd_card *card, struct snd_opti9xx *chip, - int dma1, int dma2, - struct snd_opti93x **rcodec) -{ - static struct snd_device_ops ops = { - .dev_free = snd_opti93x_dev_free, - }; - int error; - struct snd_opti93x *codec; - - *rcodec = NULL; - codec = kzalloc(sizeof(*codec), GFP_KERNEL); - if (codec == NULL) - return -ENOMEM; - codec->irq = -1; - codec->dma1 = -1; - codec->dma2 = -1; - - if ((codec->res_port = request_region(chip->wss_base + 4, 4, "OPTI93x CODEC")) == NULL) { - snd_printk(KERN_ERR "opti9xx: can't grab port 0x%lx\n", chip->wss_base + 4); - snd_opti93x_free(codec); - return -EBUSY; - } - if (request_dma(dma1, "OPTI93x - 1")) { - snd_printk(KERN_ERR "opti9xx: can't grab DMA1 %d\n", dma1); - snd_opti93x_free(codec); - return -EBUSY; - } - codec->dma1 = chip->dma1; - if (request_dma(dma2, "OPTI93x - 2")) { - snd_printk(KERN_ERR "opti9xx: can't grab DMA2 %d\n", dma2); - snd_opti93x_free(codec); - return -EBUSY; - } - codec->dma2 = chip->dma2; - - if (request_irq(chip->irq, snd_opti93x_interrupt, IRQF_DISABLED, DEV_NAME" - WSS", codec)) { - snd_printk(KERN_ERR "opti9xx: can't grab IRQ %d\n", chip->irq); - snd_opti93x_free(codec); - return -EBUSY; - } - - codec->card = card; - codec->port = chip->wss_base + 4; - codec->irq = chip->irq; - - spin_lock_init(&codec->lock); - codec->hardware = chip->hardware; - codec->chip = chip; - - if ((error = snd_opti93x_probe(codec))) { - snd_opti93x_free(codec); - return error; - } - - snd_opti93x_init(codec); - - /* Register device */ - if ((error = snd_device_new(card, SNDRV_DEV_LOWLEVEL, codec, &ops)) < 0) { - snd_opti93x_free(codec); - return error; - } - - *rcodec = codec; - return 0; -} - -static struct snd_pcm_ops snd_opti93x_playback_ops = { - .open = snd_opti93x_playback_open, - .close = snd_opti93x_playback_close, - .ioctl = snd_pcm_lib_ioctl, - .hw_params = snd_opti93x_hw_params, - .hw_free = snd_opti93x_hw_free, - .prepare = snd_opti93x_playback_prepare, - .trigger = snd_opti93x_playback_trigger, - .pointer = snd_opti93x_playback_pointer, -}; - -static struct snd_pcm_ops snd_opti93x_capture_ops = { - .open = snd_opti93x_capture_open, - .close = snd_opti93x_capture_close, - .ioctl = snd_pcm_lib_ioctl, - .hw_params = snd_opti93x_hw_params, - .hw_free = snd_opti93x_hw_free, - .prepare = snd_opti93x_capture_prepare, - .trigger = snd_opti93x_capture_trigger, - .pointer = snd_opti93x_capture_pointer, -}; - -static int snd_opti93x_pcm(struct snd_opti93x *codec, int device, struct snd_pcm **rpcm) -{ - int error; - struct snd_pcm *pcm; - - if ((error = snd_pcm_new(codec->card, "OPTi 82C93X", device, 1, 1, &pcm)) < 0) - return error; - - snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_opti93x_playback_ops); - snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_opti93x_capture_ops); - - pcm->private_data = codec; - pcm->info_flags = SNDRV_PCM_INFO_JOINT_DUPLEX; - - strcpy(pcm->name, snd_opti93x_chip_id(codec)); - - snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, - snd_dma_isa_data(), - 64*1024, codec->dma1 > 3 || codec->dma2 > 3 ? 128*1024 : 64*1024); - - codec->pcm = pcm; - if (rpcm) - *rpcm = pcm; - return 0; -} - -/* - * MIXER part - */ - -static int snd_opti93x_info_mux(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) -{ - static char *texts[4] = { - "Line1", "Aux", "Mic", "Mix" - }; - - uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; - uinfo->count = 2; - uinfo->value.enumerated.items = 4; - if (uinfo->value.enumerated.item > 3) - uinfo->value.enumerated.item = 3; - strcpy(uinfo->value.enumerated.name, texts[uinfo->value.enumerated.item]); - return 0; -} - -static int snd_opti93x_get_mux(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) -{ - struct snd_opti93x *chip = snd_kcontrol_chip(kcontrol); - unsigned long flags; - - spin_lock_irqsave(&chip->lock, flags); - ucontrol->value.enumerated.item[0] = (chip->image[OPTi93X_MIXOUT_LEFT] & OPTi93X_MIXOUT_MIXER) >> 6; - ucontrol->value.enumerated.item[1] = (chip->image[OPTi93X_MIXOUT_RIGHT] & OPTi93X_MIXOUT_MIXER) >> 6; - spin_unlock_irqrestore(&chip->lock, flags); - return 0; -} - -static int snd_opti93x_put_mux(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) -{ - struct snd_opti93x *chip = snd_kcontrol_chip(kcontrol); - unsigned long flags; - unsigned short left, right; - int change; - - if (ucontrol->value.enumerated.item[0] > 3 || - ucontrol->value.enumerated.item[1] > 3) - return -EINVAL; - left = ucontrol->value.enumerated.item[0] << 6; - right = ucontrol->value.enumerated.item[1] << 6; - spin_lock_irqsave(&chip->lock, flags); - left = (chip->image[OPTi93X_MIXOUT_LEFT] & ~OPTi93X_MIXOUT_MIXER) | left; - right = (chip->image[OPTi93X_MIXOUT_RIGHT] & ~OPTi93X_MIXOUT_MIXER) | right; - change = left != chip->image[OPTi93X_MIXOUT_LEFT] || - right != chip->image[OPTi93X_MIXOUT_RIGHT]; - snd_opti93x_out_image(chip, OPTi93X_MIXOUT_LEFT, left); - snd_opti93x_out_image(chip, OPTi93X_MIXOUT_RIGHT, right); - spin_unlock_irqrestore(&chip->lock, flags); - return change; -} - -#if 0 - -#define OPTi93X_SINGLE(xname, xindex, reg, shift, mask, invert) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ - .info = snd_opti93x_info_single, \ - .get = snd_opti93x_get_single, .put = snd_opti93x_put_single, \ - .private_value = reg | (shift << 8) | (mask << 16) | (invert << 24) } - -static int snd_opti93x_info_single(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) -{ - int mask = (kcontrol->private_value >> 16) & 0xff; - - uinfo->type = mask == 1 ? SNDRV_CTL_ELEM_TYPE_BOOLEAN : SNDRV_CTL_ELEM_TYPE_INTEGER; - uinfo->count = 1; - uinfo->value.integer.min = 0; - uinfo->value.integer.max = mask; - return 0; -} - -static int snd_opti93x_get_single(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) -{ - struct snd_opti93x *chip = snd_kcontrol_chip(kcontrol); - unsigned long flags; - int reg = kcontrol->private_value & 0xff; - int shift = (kcontrol->private_value >> 8) & 0xff; - int mask = (kcontrol->private_value >> 16) & 0xff; - int invert = (kcontrol->private_value >> 24) & 0xff; - - spin_lock_irqsave(&chip->lock, flags); - ucontrol->value.integer.value[0] = (chip->image[reg] >> shift) & mask; - spin_unlock_irqrestore(&chip->lock, flags); - if (invert) - ucontrol->value.integer.value[0] = mask - ucontrol->value.integer.value[0]; - return 0; -} - -static int snd_opti93x_put_single(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) -{ - struct snd_opti93x *chip = snd_kcontrol_chip(kcontrol); - unsigned long flags; - int reg = kcontrol->private_value & 0xff; - int shift = (kcontrol->private_value >> 8) & 0xff; - int mask = (kcontrol->private_value >> 16) & 0xff; - int invert = (kcontrol->private_value >> 24) & 0xff; - int change; - unsigned short val; - - val = (ucontrol->value.integer.value[0] & mask); - if (invert) - val = mask - val; - val <<= shift; - spin_lock_irqsave(&chip->lock, flags); - val = (chip->image[reg] & ~(mask << shift)) | val; - change = val != chip->image[reg]; - snd_opti93x_out(chip, reg, val); - spin_unlock_irqrestore(&chip->lock, flags); - return change; -} - -#endif /* single */ - -#define OPTi93X_DOUBLE(xname, xindex, left_reg, right_reg, shift_left, shift_right, mask, invert) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ - .info = snd_opti93x_info_double, \ - .get = snd_opti93x_get_double, .put = snd_opti93x_put_double, \ - .private_value = left_reg | (right_reg << 8) | (shift_left << 16) | (shift_right << 19) | (mask << 24) | (invert << 22) } - -#define OPTi93X_DOUBLE_INVERT_INVERT(xctl) \ - do { xctl.private_value ^= 22; } while (0) -#define OPTi93X_DOUBLE_CHANGE_REGS(xctl, left_reg, right_reg) \ - do { xctl.private_value &= ~0x0000ffff; \ - xctl.private_value |= left_reg | (right_reg << 8); } while (0) - -static int snd_opti93x_info_double(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) -{ - int mask = (kcontrol->private_value >> 24) & 0xff; - - uinfo->type = mask == 1 ? SNDRV_CTL_ELEM_TYPE_BOOLEAN : SNDRV_CTL_ELEM_TYPE_INTEGER; - uinfo->count = 2; - uinfo->value.integer.min = 0; - uinfo->value.integer.max = mask; - return 0; -} - -static int snd_opti93x_get_double(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) -{ - struct snd_opti93x *chip = snd_kcontrol_chip(kcontrol); - unsigned long flags; - int left_reg = kcontrol->private_value & 0xff; - int right_reg = (kcontrol->private_value >> 8) & 0xff; - int shift_left = (kcontrol->private_value >> 16) & 0x07; - int shift_right = (kcontrol->private_value >> 19) & 0x07; - int mask = (kcontrol->private_value >> 24) & 0xff; - int invert = (kcontrol->private_value >> 22) & 1; - - spin_lock_irqsave(&chip->lock, flags); - ucontrol->value.integer.value[0] = (chip->image[left_reg] >> shift_left) & mask; - ucontrol->value.integer.value[1] = (chip->image[right_reg] >> shift_right) & mask; - spin_unlock_irqrestore(&chip->lock, flags); - if (invert) { - ucontrol->value.integer.value[0] = mask - ucontrol->value.integer.value[0]; - ucontrol->value.integer.value[1] = mask - ucontrol->value.integer.value[1]; - } - return 0; -} - -static int snd_opti93x_put_double(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) -{ - struct snd_opti93x *chip = snd_kcontrol_chip(kcontrol); - unsigned long flags; - int left_reg = kcontrol->private_value & 0xff; - int right_reg = (kcontrol->private_value >> 8) & 0xff; - int shift_left = (kcontrol->private_value >> 16) & 0x07; - int shift_right = (kcontrol->private_value >> 19) & 0x07; - int mask = (kcontrol->private_value >> 24) & 0xff; - int invert = (kcontrol->private_value >> 22) & 1; - int change; - unsigned short val1, val2; - - val1 = ucontrol->value.integer.value[0] & mask; - val2 = ucontrol->value.integer.value[1] & mask; - if (invert) { - val1 = mask - val1; - val2 = mask - val2; - } - val1 <<= shift_left; - val2 <<= shift_right; - spin_lock_irqsave(&chip->lock, flags); - val1 = (chip->image[left_reg] & ~(mask << shift_left)) | val1; - val2 = (chip->image[right_reg] & ~(mask << shift_right)) | val2; - change = val1 != chip->image[left_reg] || val2 != chip->image[right_reg]; - snd_opti93x_out_image(chip, left_reg, val1); - snd_opti93x_out_image(chip, right_reg, val2); - spin_unlock_irqrestore(&chip->lock, flags); - return change; -} - -static struct snd_kcontrol_new snd_opti93x_controls[] __devinitdata = { -OPTi93X_DOUBLE("Master Playback Switch", 0, OPTi93X_OUT_LEFT, OPTi93X_OUT_RIGHT, 7, 7, 1, 1), -OPTi93X_DOUBLE("Master Playback Volume", 0, OPTi93X_OUT_LEFT, OPTi93X_OUT_RIGHT, 1, 1, 31, 1), -OPTi93X_DOUBLE("PCM Playback Switch", 0, OPTi93X_DAC_LEFT, OPTi93X_DAC_RIGHT, 7, 7, 1, 1), -OPTi93X_DOUBLE("PCM Playback Volume", 0, OPTi93X_DAC_LEFT, OPTi93X_DAC_RIGHT, 0, 0, 31, 1), -OPTi93X_DOUBLE("FM Playback Switch", 0, OPTi931_FM_LEFT_INPUT, OPTi931_FM_RIGHT_INPUT, 7, 7, 1, 1), -OPTi93X_DOUBLE("FM Playback Volume", 0, OPTi931_FM_LEFT_INPUT, OPTi931_FM_RIGHT_INPUT, 1, 1, 15, 1), -OPTi93X_DOUBLE("Line Playback Switch", 0, OPTi93X_LINE_LEFT_INPUT, OPTi93X_LINE_RIGHT_INPUT, 7, 7, 1, 1), -OPTi93X_DOUBLE("Line Playback Volume", 0, OPTi93X_LINE_LEFT_INPUT, OPTi93X_LINE_RIGHT_INPUT, 1, 1, 15, 1), -OPTi93X_DOUBLE("Mic Playback Switch", 0, OPTi93X_MIC_LEFT_INPUT, OPTi93X_MIC_RIGHT_INPUT, 7, 7, 1, 1), -OPTi93X_DOUBLE("Mic Playback Volume", 0, OPTi93X_MIC_LEFT_INPUT, OPTi93X_MIC_RIGHT_INPUT, 1, 1, 15, 1), -OPTi93X_DOUBLE("Mic Boost", 0, OPTi93X_MIXOUT_LEFT, OPTi93X_MIXOUT_RIGHT, 5, 5, 1, 1), -OPTi93X_DOUBLE("CD Playback Switch", 0, OPTi93X_CD_LEFT_INPUT, OPTi93X_CD_RIGHT_INPUT, 7, 7, 1, 1), -OPTi93X_DOUBLE("CD Playback Volume", 0, OPTi93X_CD_LEFT_INPUT, OPTi93X_CD_RIGHT_INPUT, 1, 1, 15, 1), -OPTi93X_DOUBLE("Aux Playback Switch", 0, OPTi931_AUX_LEFT_INPUT, OPTi931_AUX_RIGHT_INPUT, 7, 7, 1, 1), -OPTi93X_DOUBLE("Aux Playback Volume", 0, OPTi931_AUX_LEFT_INPUT, OPTi931_AUX_RIGHT_INPUT, 1, 1, 15, 1), -OPTi93X_DOUBLE("Capture Volume", 0, OPTi93X_MIXOUT_LEFT, OPTi93X_MIXOUT_RIGHT, 0, 0, 15, 0), -{ - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "Capture Source", - .info = snd_opti93x_info_mux, - .get = snd_opti93x_get_mux, - .put = snd_opti93x_put_mux, -} -}; - -static int __devinit snd_opti93x_mixer(struct snd_opti93x *chip) -{ - struct snd_card *card; - struct snd_kcontrol_new knew; - int err; - unsigned int idx; - - snd_assert(chip != NULL && chip->card != NULL, return -EINVAL); - - card = chip->card; - - strcpy(card->mixername, snd_opti93x_chip_id(chip)); - - for (idx = 0; idx < ARRAY_SIZE(snd_opti93x_controls); idx++) { - knew = snd_opti93x_controls[idx]; - if (chip->hardware == OPTi9XX_HW_82C930) { - if (strstr(knew.name, "FM")) /* skip FM controls */ - continue; - else if (strcmp(knew.name, "Mic Playback Volume")) - OPTi93X_DOUBLE_INVERT_INVERT(knew); - else if (strstr(knew.name, "Aux")) - OPTi93X_DOUBLE_CHANGE_REGS(knew, OPTi930_AUX_LEFT_INPUT, OPTi930_AUX_RIGHT_INPUT); - else if (strcmp(knew.name, "PCM Playback Volume")) - OPTi93X_DOUBLE_INVERT_INVERT(knew); - else if (strcmp(knew.name, "Master Playback Volume")) - OPTi93X_DOUBLE_INVERT_INVERT(knew); - } - if ((err = snd_ctl_add(card, snd_ctl_new1(&snd_opti93x_controls[idx], chip))) < 0) - return err; - } - return 0; -} - #endif /* OPTi93X */ static int __devinit snd_card_opti9xx_detect(struct snd_card *card, @@ -1739,8 +685,16 @@ static void snd_card_opti9xx_free(struct { struct snd_opti9xx *chip = card->private_data; - if (chip) + if (chip) { +#ifdef OPTi93X + struct snd_cs4231 *codec = chip->codec; + if (codec->irq > 0) { + disable_irq(codec->irq); + free_irq(codec->irq, codec); + } +#endif release_and_free_resource(chip->res_mc_base); + } } static int __devinit snd_opti9xx_probe(struct snd_card *card) @@ -1748,11 +702,11 @@ static int __devinit snd_opti9xx_probe(s static long possible_ports[] = {0x530, 0xe80, 0xf40, 0x604, -1}; int error; struct snd_opti9xx *chip = card->private_data; -#if defined(OPTi93X) - struct snd_opti93x *codec; -#elif defined(CS4231) +#if defined(CS4231) || defined(OPTi93X) struct snd_cs4231 *codec; +#ifdef CS4231 struct snd_timer *timer; +#endif #else struct snd_ad1848 *codec; #endif @@ -1784,26 +738,34 @@ static int __devinit snd_opti9xx_probe(s if ((error = snd_opti9xx_configure(chip))) return error; -#if defined(OPTi93X) - if ((error = snd_opti93x_create(card, chip, chip->dma1, chip->dma2, &codec))) - return error; - if ((error = snd_opti93x_pcm(codec, 0, &pcm)) < 0) - return error; - if ((error = snd_opti93x_mixer(codec)) < 0) - return error; -#elif defined(CS4231) +#if defined(CS4231) || defined(OPTi93X) if ((error = snd_cs4231_create(card, chip->wss_base + 4, -1, chip->irq, chip->dma1, chip->dma2, - CS4231_HW_DETECT, - 0, +#ifdef CS4231 + CS4231_HW_DETECT, 0, +#else /* OPTi93x */ + CS4231_HW_OPTI93X, CS4231_HWSHARE_IRQ, +#endif &codec)) < 0) return error; +#ifdef OPTi93X + chip->codec = codec; +#endif if ((error = snd_cs4231_pcm(codec, 0, &pcm)) < 0) return error; if ((error = snd_cs4231_mixer(codec)) < 0) return error; +#ifdef CS4231 if ((error = snd_cs4231_timer(codec, 0, &timer)) < 0) return error; +#else /* OPTI93X */ + error = request_irq(chip->irq, snd_opti93x_interrupt, + IRQF_DISABLED, DEV_NAME" - WSS", codec); + if (error < 0) { + snd_printk(KERN_ERR "opti9xx: can't grab IRQ %d\n", chip->irq); + return error; + } +#endif #else if ((error = snd_ad1848_create(card, chip->wss_base + 4, chip->irq, chip->dma1, --------------------------------------------------------------- Sprawdz jak zdobyc zdrowy usmiech! Kliknij >> http://link.interia.pl/f1e26

3 4

Re: [alsa-devel] [PATCH] sound: emu10k1 - fix system hang with Audigy2 ZS Notebook PCMCIA
by Chris Rankin 11 Jun '08

11 Jun '08

Hi, I can't say whether this patch fixes the hang at boot-time with the Audigy2 ZS Notebook card, but my workstation with its Audigy 2 PCI card boots a LOT more quietly with this patch. It used to make a sound like a herd of stampeding elephants rushing past (and had done for quiet a while...), but now is far better behaved. Cheers, Chris __________________________________________________________ Sent from Yahoo! Mail. A Smarter Email http://uk.docs.yahoo.com/nowyoucan.html

1 0

[alsa-devel] [PATCH asoc-dev 1/2] ASoC: Use correct include file for gpiolib in N810 machine driver
by Jarkko Nikula 11 Jun '08

11 Jun '08

Signed-off-by: Jarkko Nikula <jarkko.nikula(a)nokia.com> --- sound/soc/omap/n810.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/sound/soc/omap/n810.c b/sound/soc/omap/n810.c index 2d982b1..c32487b 100644 --- a/sound/soc/omap/n810.c +++ b/sound/soc/omap/n810.c @@ -30,7 +30,7 @@ #include <asm/mach-types.h> #include <asm/arch/hardware.h> -#include <asm/gpio.h> +#include <linux/gpio.h> #include <asm/arch/mcbsp.h> #include "omap-mcbsp.h" -- 1.5.5.3

2 4

Re: [alsa-devel] Problems regarding alsa-info.sh
by Travis Place 10 Jun '08

10 Jun '08

Sorry for the quick 2nd post, but ive just been thinking about this.. If we can patch the GIT version with the patch i just emailed, and temporarily put that same file (version 0.4.46) into the HG repo (even if it has to be entered manually) then current script users will get the new script (which contains the new URLs). That will solve half the problem. Then we just need a friendly URL to post in wikis etc. Ive setup a very temporary tinyurl page.. http://tinyurl.com/5bz98h Seems to work ok, but we want something more perm, and more professional looking, really. Travis Place.

3 5

[alsa-devel] What does 0dB refer to? (Logitech USB Speakers)
by Lennart Poettering 10 Jun '08

10 Jun '08

Heya! I think I discussed this with both James and Takashi a while back: it would be great if we could initialize the sound card mixers in a better way by default and not everything set to 0. i.e. for output only PCM should be active, at a sensible volume, no bass/treble/3d enabled or whatever. All other sources should be muted. And that for input the mic jack should be active and nothing else, again. Right now people too often have to invest a lot of time to find the right controls to toggle/change in the mixer to get something sensible out of the speakers. Some distributions have started to ship special scripts that try to initialize the volumes properly. I know for the Fedora case that this tool is very very simple, and just initializes PCM and Master to 70% and that's basically it. It would be highly preferable if we had a sane tool like this from alsa upstream, which would set the default values to 0dB, possibly as an extension to "alsactl". I started to hack something similar to this as part of PulseAudio: if PA finds that the PCM slider is not really useful for volume control (no attenuation to at least -60dB, too few steps, no seperate controls for all channels, ...) it falls back to software volume control, however tries to initialize the the slider to 0dB first. Now the thing is, this mostly works fine, however on one of my devices, a pair of external Logitech USB speakers (ID 046d:0a04 Logitech, Inc. V20 portable speakers), the dB scale seems to be totally bogus. According to ALSA volume ranges from -41 dB to +3dB. However, Every setting > -41 dB makes audio awfully loud. Really, really fucking loud that is. Disco loud. As loud that the speakers start jump around centimeters due to the massive vibrations. Setting the volume to 0dB with those speakers really makes you fear you are trashing them. I somehow expected that the magic "0dB" setting in ALSA would refer to some sane default, where the final output would have a sensible volume. In this case this is not so. I am thus wondering how ALSA actually defines 0dB? Is this a bug in the hardware that should be worked around in ALSA? Is this an ALSA bug? Lennart -- Lennart Poettering Red Hat, Inc. lennart [at] poettering [dot] net ICQ# 11060553 http://0pointer.net/lennart/ GnuPG 0x1A015CC4

13 82