- Alsa-devel - mailman.alsa-project.org

[alsa-devel] asoc-v2 ac97-wm9713 suspend/resume
by Oliver Ford 23 Jun '08

23 Jun '08

I have been porting linux to the iPAQ 214 which uses a wm9713 codec on the ac97 of a pxa310. It uses it for audio and touchscreen. I'm working from the git tree of arm.linux.org.uk pxa branch and have merged in the asoc-v2-dev of wolfson-asoc (all last thursday). I have the audio and touchscreen working via a platform driver I've put together (sound/soc/pxa/hpipaq214-audio.c) from copying sound/soc/pxa/zylonite.c etc a few months ago. I'm now trying to get the audio working through suspend/resume. To save as much power as possible in D3 suspend the wm9713 power is completely turned off in hpipaq214-audio.c via a gpio. This is in suspend_late() and resume_early() to make sure the power is back before the AC97/WM9713 drivers try to wake stuff up. To make the touchscreen work after suspend I had to add a cold reset to sound/soc/wm9713.c : wm9713_resume(). Also I have to remove the calls to snd_soc_card_suspend_pcms() and snd_soc_card_resume_pcms() from my hpipaq214-audio.c's normal suspend/resume functions. These calls were originally in sound/soc/pxa/zylonite.c but I notice there is now no suspend/resume functions in there. Some of the other platform audio drivers call snd_soc_suspend_pcms() some call snd_soc_suspend() and some snd_soc_card_suspend_pcms(). Only snd_soc_suspend_pcms() seems to actually exists. If I do actually call snd_soc_card_suspend/resume_pcms() then any use of the audio or touchscreen later on freezes the process doing it. Which am I actually supposed to do, and is there a more 'proper' way way of bringing the wm9713 back up from complete power down on resume? Oliver Ford

3 4

[alsa-devel] [PATCH 2/2] wss_lib: rename cs4231.h into wss.h
by Krzysztof Helt 23 Jun '08

23 Jun '08

From: Krzysztof Helt <krzysztof.h1(a)wp.pl> Rename file include/sound/cs4231.h into include/sound/wss.h This is a step toward merging all libraries for Windows Sound System compatible chips into a single library. Signed-off-by: Krzysztof Helt <krzysztof.h1(a)wp.pl> --- This patch does not pass the checkpatch check. It is done to preserve "move" operation, so the old and a new file are identical and differ only by name. diff -urpN linux-alsa/include/sound/cs4231.h linux-mm/include/sound/cs4231.h --- linux-alsa/include/sound/cs4231.h 2008-06-14 00:05:02.000000000 +0200 +++ linux-mm/include/sound/cs4231.h 1970-01-01 01:00:00.000000000 +0100 @@ -1,175 +0,0 @@ -#ifndef __SOUND_CS4231_H -#define __SOUND_CS4231_H - -/* - * Copyright (c) by Jaroslav Kysela <perex(a)perex.cz> - * Definitions for CS4231 & InterWave chips & compatible chips - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include "control.h" -#include "pcm.h" -#include "timer.h" - -#include "cs4231-regs.h" - -/* defines for codec.mode */ - -#define CS4231_MODE_NONE 0x0000 -#define CS4231_MODE_PLAY 0x0001 -#define CS4231_MODE_RECORD 0x0002 -#define CS4231_MODE_TIMER 0x0004 -#define CS4231_MODE_OPEN (CS4231_MODE_PLAY|CS4231_MODE_RECORD|CS4231_MODE_TIMER) - -/* defines for codec.hardware */ - -#define CS4231_HW_DETECT 0x0000 /* let CS4231 driver detect chip */ -#define CS4231_HW_DETECT3 0x0001 /* allow mode 3 */ -#define CS4231_HW_TYPE_MASK 0xff00 /* type mask */ -#define CS4231_HW_CS4231_MASK 0x0100 /* CS4231 serie */ -#define CS4231_HW_CS4231 0x0100 /* CS4231 chip */ -#define CS4231_HW_CS4231A 0x0101 /* CS4231A chip */ -#define CS4231_HW_AD1845 0x0102 /* AD1845 chip */ -#define CS4231_HW_CS4232_MASK 0x0200 /* CS4232 serie (has control ports) */ -#define CS4231_HW_CS4232 0x0200 /* CS4232 */ -#define CS4231_HW_CS4232A 0x0201 /* CS4232A */ -#define CS4231_HW_CS4236 0x0202 /* CS4236 */ -#define CS4231_HW_CS4236B_MASK 0x0400 /* CS4236B serie (has extended control regs) */ -#define CS4231_HW_CS4235 0x0400 /* CS4235 - Crystal Clear (tm) stereo enhancement */ -#define CS4231_HW_CS4236B 0x0401 /* CS4236B */ -#define CS4231_HW_CS4237B 0x0402 /* CS4237B - SRS 3D */ -#define CS4231_HW_CS4238B 0x0403 /* CS4238B - QSOUND 3D */ -#define CS4231_HW_CS4239 0x0404 /* CS4239 - Crystal Clear (tm) stereo enhancement */ -/* compatible, but clones */ -#define CS4231_HW_INTERWAVE 0x1000 /* InterWave chip */ -#define CS4231_HW_OPL3SA2 0x1101 /* OPL3-SA2 chip, similar to cs4231 */ -#define CS4231_HW_OPTI93X 0x1102 /* Opti 930/931/933 */ - -/* defines for codec.hwshare */ -#define CS4231_HWSHARE_IRQ (1<<0) -#define CS4231_HWSHARE_DMA1 (1<<1) -#define CS4231_HWSHARE_DMA2 (1<<2) - -struct snd_cs4231 { - unsigned long port; /* base i/o port */ - struct resource *res_port; - unsigned long cport; /* control base i/o port (CS4236) */ - struct resource *res_cport; - int irq; /* IRQ line */ - int dma1; /* playback DMA */ - int dma2; /* record DMA */ - unsigned short version; /* version of CODEC chip */ - unsigned short mode; /* see to CS4231_MODE_XXXX */ - unsigned short hardware; /* see to CS4231_HW_XXXX */ - unsigned short hwshare; /* shared resources */ - unsigned short single_dma:1, /* forced single DMA mode (GUS 16-bit daughter board) or dma1 == dma2 */ - ebus_flag:1; /* SPARC: EBUS present */ - - struct snd_card *card; - struct snd_pcm *pcm; - struct snd_pcm_substream *playback_substream; - struct snd_pcm_substream *capture_substream; - struct snd_timer *timer; - - unsigned char image[32]; /* registers image */ - unsigned char eimage[32]; /* extended registers image */ - unsigned char cimage[16]; /* control registers image */ - int mce_bit; - int calibrate_mute; - int sw_3d_bit; - unsigned int p_dma_size; - unsigned int c_dma_size; - - spinlock_t reg_lock; - struct mutex mce_mutex; - struct mutex open_mutex; - - int (*rate_constraint) (struct snd_pcm_runtime *runtime); - void (*set_playback_format) (struct snd_cs4231 *chip, struct snd_pcm_hw_params *hw_params, unsigned char pdfr); - void (*set_capture_format) (struct snd_cs4231 *chip, struct snd_pcm_hw_params *hw_params, unsigned char cdfr); - void (*trigger) (struct snd_cs4231 *chip, unsigned int what, int start); -#ifdef CONFIG_PM - void (*suspend) (struct snd_cs4231 *chip); - void (*resume) (struct snd_cs4231 *chip); -#endif - void *dma_private_data; - int (*claim_dma) (struct snd_cs4231 *chip, void *dma_private_data, int dma); - int (*release_dma) (struct snd_cs4231 *chip, void *dma_private_data, int dma); -}; - -/* exported functions */ - -void snd_cs4231_out(struct snd_cs4231 *chip, unsigned char reg, unsigned char val); -unsigned char snd_cs4231_in(struct snd_cs4231 *chip, unsigned char reg); -void snd_cs4236_ext_out(struct snd_cs4231 *chip, unsigned char reg, unsigned char val); -unsigned char snd_cs4236_ext_in(struct snd_cs4231 *chip, unsigned char reg); -void snd_cs4231_mce_up(struct snd_cs4231 *chip); -void snd_cs4231_mce_down(struct snd_cs4231 *chip); - -void snd_cs4231_overrange(struct snd_cs4231 *chip); - -irqreturn_t snd_cs4231_interrupt(int irq, void *dev_id); - -const char *snd_cs4231_chip_id(struct snd_cs4231 *chip); - -int snd_cs4231_create(struct snd_card *card, - unsigned long port, - unsigned long cport, - int irq, int dma1, int dma2, - unsigned short hardware, - unsigned short hwshare, - struct snd_cs4231 ** rchip); -int snd_cs4231_pcm(struct snd_cs4231 * chip, int device, struct snd_pcm **rpcm); -int snd_cs4231_timer(struct snd_cs4231 * chip, int device, struct snd_timer **rtimer); -int snd_cs4231_mixer(struct snd_cs4231 * chip); - -int snd_cs4236_create(struct snd_card *card, - unsigned long port, - unsigned long cport, - int irq, int dma1, int dma2, - unsigned short hardware, - unsigned short hwshare, - struct snd_cs4231 ** rchip); -int snd_cs4236_pcm(struct snd_cs4231 * chip, int device, struct snd_pcm **rpcm); -int snd_cs4236_mixer(struct snd_cs4231 * chip); - -/* - * mixer library - */ - -#define CS4231_SINGLE(xname, xindex, reg, shift, mask, invert) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ - .info = snd_cs4231_info_single, \ - .get = snd_cs4231_get_single, .put = snd_cs4231_put_single, \ - .private_value = reg | (shift << 8) | (mask << 16) | (invert << 24) } - -int snd_cs4231_info_single(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo); -int snd_cs4231_get_single(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol); -int snd_cs4231_put_single(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol); - -#define CS4231_DOUBLE(xname, xindex, left_reg, right_reg, shift_left, shift_right, mask, invert) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ - .info = snd_cs4231_info_double, \ - .get = snd_cs4231_get_double, .put = snd_cs4231_put_double, \ - .private_value = left_reg | (right_reg << 8) | (shift_left << 16) | (shift_right << 19) | (mask << 24) | (invert << 22) } - -int snd_cs4231_info_double(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo); -int snd_cs4231_get_double(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol); -int snd_cs4231_put_double(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol); - -#endif /* __SOUND_CS4231_H */ diff -urpN linux-alsa/include/sound/snd_wavefront.h linux-mm/include/sound/snd_wavefront.h --- linux-alsa/include/sound/snd_wavefront.h 2008-06-14 00:05:02.000000000 +0200 +++ linux-mm/include/sound/snd_wavefront.h 2008-06-15 23:04:42.657642437 +0200 @@ -1,7 +1,6 @@ #ifndef __SOUND_SND_WAVEFRONT_H__ #define __SOUND_SND_WAVEFRONT_H__ -#include "cs4231.h" #include "mpu401.h" #include "hwdep.h" #include "rawmidi.h" diff -urpN linux-alsa/include/sound/wss.h linux-mm/include/sound/wss.h --- linux-alsa/include/sound/wss.h 1970-01-01 01:00:00.000000000 +0100 +++ linux-mm/include/sound/wss.h 2008-06-14 00:05:02.000000000 +0200 @@ -0,0 +1,175 @@ +#ifndef __SOUND_CS4231_H +#define __SOUND_CS4231_H + +/* + * Copyright (c) by Jaroslav Kysela <perex(a)perex.cz> + * Definitions for CS4231 & InterWave chips & compatible chips + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include "control.h" +#include "pcm.h" +#include "timer.h" + +#include "cs4231-regs.h" + +/* defines for codec.mode */ + +#define CS4231_MODE_NONE 0x0000 +#define CS4231_MODE_PLAY 0x0001 +#define CS4231_MODE_RECORD 0x0002 +#define CS4231_MODE_TIMER 0x0004 +#define CS4231_MODE_OPEN (CS4231_MODE_PLAY|CS4231_MODE_RECORD|CS4231_MODE_TIMER) + +/* defines for codec.hardware */ + +#define CS4231_HW_DETECT 0x0000 /* let CS4231 driver detect chip */ +#define CS4231_HW_DETECT3 0x0001 /* allow mode 3 */ +#define CS4231_HW_TYPE_MASK 0xff00 /* type mask */ +#define CS4231_HW_CS4231_MASK 0x0100 /* CS4231 serie */ +#define CS4231_HW_CS4231 0x0100 /* CS4231 chip */ +#define CS4231_HW_CS4231A 0x0101 /* CS4231A chip */ +#define CS4231_HW_AD1845 0x0102 /* AD1845 chip */ +#define CS4231_HW_CS4232_MASK 0x0200 /* CS4232 serie (has control ports) */ +#define CS4231_HW_CS4232 0x0200 /* CS4232 */ +#define CS4231_HW_CS4232A 0x0201 /* CS4232A */ +#define CS4231_HW_CS4236 0x0202 /* CS4236 */ +#define CS4231_HW_CS4236B_MASK 0x0400 /* CS4236B serie (has extended control regs) */ +#define CS4231_HW_CS4235 0x0400 /* CS4235 - Crystal Clear (tm) stereo enhancement */ +#define CS4231_HW_CS4236B 0x0401 /* CS4236B */ +#define CS4231_HW_CS4237B 0x0402 /* CS4237B - SRS 3D */ +#define CS4231_HW_CS4238B 0x0403 /* CS4238B - QSOUND 3D */ +#define CS4231_HW_CS4239 0x0404 /* CS4239 - Crystal Clear (tm) stereo enhancement */ +/* compatible, but clones */ +#define CS4231_HW_INTERWAVE 0x1000 /* InterWave chip */ +#define CS4231_HW_OPL3SA2 0x1101 /* OPL3-SA2 chip, similar to cs4231 */ +#define CS4231_HW_OPTI93X 0x1102 /* Opti 930/931/933 */ + +/* defines for codec.hwshare */ +#define CS4231_HWSHARE_IRQ (1<<0) +#define CS4231_HWSHARE_DMA1 (1<<1) +#define CS4231_HWSHARE_DMA2 (1<<2) + +struct snd_cs4231 { + unsigned long port; /* base i/o port */ + struct resource *res_port; + unsigned long cport; /* control base i/o port (CS4236) */ + struct resource *res_cport; + int irq; /* IRQ line */ + int dma1; /* playback DMA */ + int dma2; /* record DMA */ + unsigned short version; /* version of CODEC chip */ + unsigned short mode; /* see to CS4231_MODE_XXXX */ + unsigned short hardware; /* see to CS4231_HW_XXXX */ + unsigned short hwshare; /* shared resources */ + unsigned short single_dma:1, /* forced single DMA mode (GUS 16-bit daughter board) or dma1 == dma2 */ + ebus_flag:1; /* SPARC: EBUS present */ + + struct snd_card *card; + struct snd_pcm *pcm; + struct snd_pcm_substream *playback_substream; + struct snd_pcm_substream *capture_substream; + struct snd_timer *timer; + + unsigned char image[32]; /* registers image */ + unsigned char eimage[32]; /* extended registers image */ + unsigned char cimage[16]; /* control registers image */ + int mce_bit; + int calibrate_mute; + int sw_3d_bit; + unsigned int p_dma_size; + unsigned int c_dma_size; + + spinlock_t reg_lock; + struct mutex mce_mutex; + struct mutex open_mutex; + + int (*rate_constraint) (struct snd_pcm_runtime *runtime); + void (*set_playback_format) (struct snd_cs4231 *chip, struct snd_pcm_hw_params *hw_params, unsigned char pdfr); + void (*set_capture_format) (struct snd_cs4231 *chip, struct snd_pcm_hw_params *hw_params, unsigned char cdfr); + void (*trigger) (struct snd_cs4231 *chip, unsigned int what, int start); +#ifdef CONFIG_PM + void (*suspend) (struct snd_cs4231 *chip); + void (*resume) (struct snd_cs4231 *chip); +#endif + void *dma_private_data; + int (*claim_dma) (struct snd_cs4231 *chip, void *dma_private_data, int dma); + int (*release_dma) (struct snd_cs4231 *chip, void *dma_private_data, int dma); +}; + +/* exported functions */ + +void snd_cs4231_out(struct snd_cs4231 *chip, unsigned char reg, unsigned char val); +unsigned char snd_cs4231_in(struct snd_cs4231 *chip, unsigned char reg); +void snd_cs4236_ext_out(struct snd_cs4231 *chip, unsigned char reg, unsigned char val); +unsigned char snd_cs4236_ext_in(struct snd_cs4231 *chip, unsigned char reg); +void snd_cs4231_mce_up(struct snd_cs4231 *chip); +void snd_cs4231_mce_down(struct snd_cs4231 *chip); + +void snd_cs4231_overrange(struct snd_cs4231 *chip); + +irqreturn_t snd_cs4231_interrupt(int irq, void *dev_id); + +const char *snd_cs4231_chip_id(struct snd_cs4231 *chip); + +int snd_cs4231_create(struct snd_card *card, + unsigned long port, + unsigned long cport, + int irq, int dma1, int dma2, + unsigned short hardware, + unsigned short hwshare, + struct snd_cs4231 ** rchip); +int snd_cs4231_pcm(struct snd_cs4231 * chip, int device, struct snd_pcm **rpcm); +int snd_cs4231_timer(struct snd_cs4231 * chip, int device, struct snd_timer **rtimer); +int snd_cs4231_mixer(struct snd_cs4231 * chip); + +int snd_cs4236_create(struct snd_card *card, + unsigned long port, + unsigned long cport, + int irq, int dma1, int dma2, + unsigned short hardware, + unsigned short hwshare, + struct snd_cs4231 ** rchip); +int snd_cs4236_pcm(struct snd_cs4231 * chip, int device, struct snd_pcm **rpcm); +int snd_cs4236_mixer(struct snd_cs4231 * chip); + +/* + * mixer library + */ + +#define CS4231_SINGLE(xname, xindex, reg, shift, mask, invert) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ + .info = snd_cs4231_info_single, \ + .get = snd_cs4231_get_single, .put = snd_cs4231_put_single, \ + .private_value = reg | (shift << 8) | (mask << 16) | (invert << 24) } + +int snd_cs4231_info_single(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo); +int snd_cs4231_get_single(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol); +int snd_cs4231_put_single(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol); + +#define CS4231_DOUBLE(xname, xindex, left_reg, right_reg, shift_left, shift_right, mask, invert) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ + .info = snd_cs4231_info_double, \ + .get = snd_cs4231_get_double, .put = snd_cs4231_put_double, \ + .private_value = left_reg | (right_reg << 8) | (shift_left << 16) | (shift_right << 19) | (mask << 24) | (invert << 22) } + +int snd_cs4231_info_double(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo); +int snd_cs4231_get_double(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol); +int snd_cs4231_put_double(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol); + +#endif /* __SOUND_CS4231_H */ diff -urpN linux-alsa/sound/isa/azt2320.c linux-mm/sound/isa/azt2320.c --- linux-alsa/sound/isa/azt2320.c 2008-06-14 00:05:02.000000000 +0200 +++ linux-mm/sound/isa/azt2320.c 2008-06-15 23:03:04.309647551 +0200 @@ -38,7 +38,7 @@ #include <linux/moduleparam.h> #include <sound/core.h> #include <sound/initval.h> -#include <sound/cs4231.h> +#include <sound/wss.h> #include <sound/mpu401.h> #include <sound/opl3.h> diff -urpN linux-alsa/sound/isa/cs423x/cs4231.c linux-mm/sound/isa/cs423x/cs4231.c --- linux-alsa/sound/isa/cs423x/cs4231.c 2008-06-14 00:05:02.000000000 +0200 +++ linux-mm/sound/isa/cs423x/cs4231.c 2008-06-15 23:02:29.865646338 +0200 @@ -27,7 +27,7 @@ #include <linux/wait.h> #include <linux/moduleparam.h> #include <sound/core.h> -#include <sound/cs4231.h> +#include <sound/wss.h> #include <sound/mpu401.h> #include <sound/initval.h> diff -urpN linux-alsa/sound/isa/cs423x/cs4236.c linux-mm/sound/isa/cs423x/cs4236.c --- linux-alsa/sound/isa/cs423x/cs4236.c 2008-06-14 00:05:02.000000000 +0200 +++ linux-mm/sound/isa/cs423x/cs4236.c 2008-06-15 23:02:54.801647075 +0200 @@ -26,7 +26,7 @@ #include <linux/pnp.h> #include <linux/moduleparam.h> #include <sound/core.h> -#include <sound/cs4231.h> +#include <sound/wss.h> #include <sound/mpu401.h> #include <sound/opl3.h> #include <sound/initval.h> diff -urpN linux-alsa/sound/isa/cs423x/cs4236_lib.c linux-mm/sound/isa/cs423x/cs4236_lib.c --- linux-alsa/sound/isa/cs423x/cs4236_lib.c 2008-06-14 00:05:02.000000000 +0200 +++ linux-mm/sound/isa/cs423x/cs4236_lib.c 2008-06-15 23:02:45.493647684 +0200 @@ -85,7 +85,7 @@ #include <linux/time.h> #include <linux/wait.h> #include <sound/core.h> -#include <sound/cs4231.h> +#include <sound/wss.h> #include <sound/asoundef.h> MODULE_AUTHOR("Jaroslav Kysela <perex(a)perex.cz>"); diff -urpN linux-alsa/sound/isa/gus/gusmax.c linux-mm/sound/isa/gus/gusmax.c --- linux-alsa/sound/isa/gus/gusmax.c 2008-06-14 00:05:02.000000000 +0200 +++ linux-mm/sound/isa/gus/gusmax.c 2008-06-15 23:01:38.317642279 +0200 @@ -28,7 +28,7 @@ #include <asm/dma.h> #include <sound/core.h> #include <sound/gus.h> -#include <sound/cs4231.h> +#include <sound/wss.h> #define SNDRV_LEGACY_FIND_FREE_IRQ #define SNDRV_LEGACY_FIND_FREE_DMA #include <sound/initval.h> diff -urpN linux-alsa/sound/isa/gus/interwave.c linux-mm/sound/isa/gus/interwave.c --- linux-alsa/sound/isa/gus/interwave.c 2008-06-14 00:05:02.000000000 +0200 +++ linux-mm/sound/isa/gus/interwave.c 2008-06-15 23:01:47.769643095 +0200 @@ -32,7 +32,7 @@ #include <asm/dma.h> #include <sound/core.h> #include <sound/gus.h> -#include <sound/cs4231.h> +#include <sound/wss.h> #ifdef SNDRV_STB #include <sound/tea6330t.h> #endif diff -urpN linux-alsa/sound/isa/opl3sa2.c linux-mm/sound/isa/opl3sa2.c --- linux-alsa/sound/isa/opl3sa2.c 2008-06-14 00:05:02.000000000 +0200 +++ linux-mm/sound/isa/opl3sa2.c 2008-06-15 23:01:58.585642441 +0200 @@ -28,7 +28,7 @@ #include <linux/pnp.h> #include <linux/moduleparam.h> #include <sound/core.h> -#include <sound/cs4231.h> +#include <sound/wss.h> #include <sound/mpu401.h> #include <sound/opl3.h> #include <sound/initval.h> diff -urpN linux-alsa/sound/isa/opti9xx/miro.c linux-mm/sound/isa/opti9xx/miro.c --- linux-alsa/sound/isa/opti9xx/miro.c 2008-06-14 00:05:02.000000000 +0200 +++ linux-mm/sound/isa/opti9xx/miro.c 2008-06-15 23:03:49.161643750 +0200 @@ -32,7 +32,7 @@ #include <asm/io.h> #include <asm/dma.h> #include <sound/core.h> -#include <sound/cs4231.h> +#include <sound/wss.h> #include <sound/mpu401.h> #include <sound/opl4.h> #include <sound/control.h> diff -urpN linux-alsa/sound/isa/opti9xx/opti92x-ad1848.c linux-mm/sound/isa/opti9xx/opti92x-ad1848.c --- linux-alsa/sound/isa/opti9xx/opti92x-ad1848.c 2008-06-14 00:05:02.000000000 +0200 +++ linux-mm/sound/isa/opti9xx/opti92x-ad1848.c 2008-06-15 23:01:29.393645689 +0200 @@ -34,7 +34,7 @@ #include <asm/dma.h> #include <sound/core.h> #if defined(CS4231) || defined(OPTi93X) -#include <sound/cs4231.h> +#include <sound/wss.h> #else #include <sound/ad1848.h> #endif /* CS4231 */ diff -urpN linux-alsa/sound/isa/sscape.c linux-mm/sound/isa/sscape.c --- linux-alsa/sound/isa/sscape.c 2008-06-14 00:05:02.000000000 +0200 +++ linux-mm/sound/isa/sscape.c 2008-06-15 23:01:15.653643218 +0200 @@ -31,7 +31,7 @@ #include <asm/dma.h> #include <sound/core.h> #include <sound/hwdep.h> -#include <sound/cs4231.h> +#include <sound/wss.h> #include <sound/mpu401.h> #include <sound/initval.h> diff -urpN linux-alsa/sound/isa/wavefront/wavefront.c linux-mm/sound/isa/wavefront/wavefront.c --- linux-alsa/sound/isa/wavefront/wavefront.c 2008-06-14 00:05:02.000000000 +0200 +++ linux-mm/sound/isa/wavefront/wavefront.c 2008-06-15 23:04:59.941642387 +0200 @@ -29,6 +29,7 @@ #include <sound/core.h> #include <sound/initval.h> #include <sound/opl3.h> +#include <sound/wss.h> #include <sound/snd_wavefront.h> MODULE_AUTHOR("Paul Barton-Davis <pbd(a)op.net>"); diff -urpN linux-alsa/sound/isa/wss/wss_lib.c linux-mm/sound/isa/wss/wss_lib.c --- linux-alsa/sound/isa/wss/wss_lib.c 2008-06-15 23:05:34.053647670 +0200 +++ linux-mm/sound/isa/wss/wss_lib.c 2008-06-15 23:00:53.449648387 +0200 @@ -31,7 +31,7 @@ #include <linux/slab.h> #include <linux/ioport.h> #include <sound/core.h> -#include <sound/cs4231.h> +#include <sound/wss.h> #include <sound/pcm_params.h> #include <asm/io.h> ---------------------------------------------------------------------- Gdzie warto jechac na urlop? Sprawdz! kliknij >>> http://link.interia.pl/f1e32

2 1

[alsa-devel] Repaired version ([PATCH] PCI168 snd-azt3328: some more fixups)
by Andreas Mohr 23 Jun '08

23 Jun '08

Hi, update: darn, I just noticed that those "unknown" play/rec IRQ types actually do turn up on dmesg _sometimes_ (a bit too often), thus a printk KERN_WARNING wasn't quite such a good idea... (revert it to optional debug logging, will possibly figure out its meaning later) ---- another update: - fix problem with codec register 0x6a being write-only by adding a software shadow register (caused annoying noise after module loading due to _toggling_ between gameport and audio bits instead of configuring them properly) - rename several "Wave" mixer controls to "PCM", since this is what Wine and several other apps are looking for (IOW, _requiring_) and this is what AC97 specs use as naming, too, thus I'd guess it's what these controls are - cleanup, small optimizations Patch diffed against patched 2.6.26-rc6 (patched with my last patch submission, that is, IOW it should apply to current ALSA tree easily). checkpatch.pl tested, runtime tested. Hopefully this will come in time for 1.0.17 and/or the next kernel merge before my previous patch hits the streets ;) (to have this all in one go) Thanks! Signed-off-by: Andreas Mohr <andi(a)lisas.de> --- azt3328.c.my_org 2008-06-14 08:20:36.000000000 +0200 +++ azt3328.c 2008-06-22 23:02:57.000000000 +0200 @@ -289,6 +289,12 @@ struct pci_dev *pci; int irq; + /* register 0x6a is write-only, thus need to remember setting. + * If we need to add more registers here, then we might try to fold this + * into some transparent combined shadow register handling with + * CONFIG_PM register storage below, but that's slightly difficult. */ + u16 shadow_reg_codec_6AH; + #ifdef CONFIG_PM /* register value containers for power management * Note: not always full I/O range preserved (just like Win driver!) */ @@ -324,21 +330,6 @@ return 0; } -static int -snd_azf3328_io_reg_setw(unsigned reg, u16 mask, int do_set) -{ - u16 prev = inw(reg), new; - - new = (do_set) ? (prev|mask) : (prev & ~mask); - /* we need to always write the new value no matter whether it differs or not, - * since some register bits don't indicate their setting */ - outw(new, reg); - if (new != prev) - return 1; - - return 0; -} - static inline void snd_azf3328_codec_outb(const struct snd_azf3328 *chip, unsigned reg, u8 value) { @@ -662,7 +653,7 @@ "pre 3D", "post 3D" }; struct azf3328_mixer_reg reg; - const char *p = NULL; + const char * const *p = NULL; snd_azf3328_mixer_reg_decode(&reg, kcontrol->private_value); uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; @@ -673,20 +664,20 @@ if (reg.reg == IDX_MIXER_ADVCTL2) { switch(reg.lchan_shift) { case 8: /* modem out sel */ - p = texts1[uinfo->value.enumerated.item]; + p = texts1; break; case 9: /* mono sel source */ - p = texts2[uinfo->value.enumerated.item]; + p = texts2; break; case 15: /* PCM Out Path */ - p = texts4[uinfo->value.enumerated.item]; + p = texts4; break; } } else if (reg.reg == IDX_MIXER_REC_SELECT) - p = texts3[uinfo->value.enumerated.item]; + p = texts3; - strcpy(uinfo->value.enumerated.name, p); + strcpy(uinfo->value.enumerated.name, p[uinfo->value.enumerated.item]); return 0; } @@ -745,9 +736,11 @@ static struct snd_kcontrol_new snd_azf3328_mixer_controls[] __devinitdata = { AZF3328_MIXER_SWITCH("Master Playback Switch", IDX_MIXER_PLAY_MASTER, 15, 1), AZF3328_MIXER_VOL_STEREO("Master Playback Volume", IDX_MIXER_PLAY_MASTER, 0x1f, 1), - AZF3328_MIXER_SWITCH("Wave Playback Switch", IDX_MIXER_WAVEOUT, 15, 1), - AZF3328_MIXER_VOL_STEREO("Wave Playback Volume", IDX_MIXER_WAVEOUT, 0x1f, 1), - AZF3328_MIXER_SWITCH("Wave 3D Bypass Playback Switch", IDX_MIXER_ADVCTL2, 7, 1), + AZF3328_MIXER_SWITCH("PCM Playback Switch", IDX_MIXER_WAVEOUT, 15, 1), + AZF3328_MIXER_VOL_STEREO("PCM Playback Volume", + IDX_MIXER_WAVEOUT, 0x1f, 1), + AZF3328_MIXER_SWITCH("PCM 3D Bypass Playback Switch", + IDX_MIXER_ADVCTL2, 7, 1), AZF3328_MIXER_SWITCH("FM Playback Switch", IDX_MIXER_FMSYNTH, 15, 1), AZF3328_MIXER_VOL_STEREO("FM Playback Volume", IDX_MIXER_FMSYNTH, 0x1f, 1), AZF3328_MIXER_SWITCH("CD Playback Switch", IDX_MIXER_CDAUDIO, 15, 1), @@ -874,7 +867,7 @@ static void snd_azf3328_codec_setfmt(struct snd_azf3328 *chip, unsigned reg, - unsigned int bitrate, + enum azf_freq_t bitrate, unsigned int format_width, unsigned int channels ) @@ -958,15 +951,29 @@ snd_azf3328_codec_setfmt(chip, reg, AZF_FREQ_4000, 8, 1); } +static void +snd_azf3328_codec_reg_6AH_update(struct snd_azf3328 *chip, + unsigned bitmask, + int enable +) +{ + if (enable) + chip->shadow_reg_codec_6AH &= ~bitmask; + else + chip->shadow_reg_codec_6AH |= bitmask; + snd_azf3328_dbgplay("6AH_update mask 0x%04x enable %d: val 0x%04x\n", + bitmask, enable, chip->shadow_reg_codec_6AH); + snd_azf3328_codec_outw(chip, IDX_IO_6AH, chip->shadow_reg_codec_6AH); +} + static inline void snd_azf3328_codec_enable(struct snd_azf3328 *chip, int enable) { + snd_azf3328_dbgplay("codec_enable %d\n", enable); /* no idea what exactly is being done here, but I strongly assume it's * PM related */ - snd_azf3328_io_reg_setw( - chip->codec_io+IDX_IO_6AH, - IO_6A_PAUSE_PLAYBACK_BIT8, - !enable + snd_azf3328_codec_reg_6AH_update( + chip, IO_6A_PAUSE_PLAYBACK_BIT8, enable ); } @@ -1404,10 +1411,8 @@ static inline void snd_azf3328_gameport_axis_circuit_enable(struct snd_azf3328 *chip, int enable) { - snd_azf3328_io_reg_setw( - chip->codec_io+IDX_IO_6AH, - IO_6A_SOMETHING2_GAMEPORT, - !enable + snd_azf3328_codec_reg_6AH_update( + chip, IO_6A_SOMETHING2_GAMEPORT, enable ); } @@ -1525,8 +1530,6 @@ { struct gameport *gp; - int io_port = chip->game_io; - chip->gameport = gp = gameport_allocate_port(); if (!gp) { printk(KERN_ERR "azt3328: cannot alloc memory for gameport\n"); @@ -1536,7 +1539,7 @@ gameport_set_name(gp, "AZF3328 Gameport"); gameport_set_phys(gp, "pci%s/gameport0", pci_name(chip->pci)); gameport_set_dev_parent(gp, &chip->pci->dev); - gp->io = io_port; + gp->io = chip->game_io; gameport_set_port_data(gp, chip); gp->open = snd_azf3328_gameport_open; @@ -1577,6 +1580,15 @@ /******************************************************************/ +static inline void +snd_azf3328_irq_log_unknown_type(u8 which) +{ + snd_azf3328_dbgplay( + "azt3328: unknown IRQ type (%x) occurred, please report!\n", + which + ); +} + static irqreturn_t snd_azf3328_interrupt(int irq, void *dev_id) { @@ -1594,11 +1606,14 @@ )) return IRQ_NONE; /* must be interrupt for another device */ - snd_azf3328_dbgplay("Interrupt %ld!\nIDX_IO_PLAY_FLAGS %04x, IDX_IO_PLAY_IRQTYPE %04x, IDX_IO_IRQSTATUS %04x\n", - irq_count++ /* debug-only */, - snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS), - snd_azf3328_codec_inw(chip, IDX_IO_PLAY_IRQTYPE), - status); + snd_azf3328_dbgplay( + "irq_count %ld! IDX_IO_PLAY_FLAGS %04x, " + "IDX_IO_PLAY_IRQTYPE %04x, IDX_IO_IRQSTATUS %04x\n", + irq_count++ /* debug-only */, + snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS), + snd_azf3328_codec_inw(chip, IDX_IO_PLAY_IRQTYPE), + status + ); if (status & IRQ_TIMER) { /* snd_azf3328_dbgplay("timer %ld\n", @@ -1631,9 +1646,9 @@ ) ); } else - snd_azf3328_dbgplay("azt3328: ouch, irq handler problem!\n"); + printk(KERN_WARNING "azt3328: irq handler problem!\n"); if (which & IRQ_PLAY_SOMETHING) - snd_azf3328_dbgplay("azt3328: unknown play IRQ type occurred, please report!\n"); + snd_azf3328_irq_log_unknown_type(which); } if (status & IRQ_RECORDING) { spin_lock(&chip->reg_lock); @@ -1653,9 +1668,9 @@ ) ); } else - snd_azf3328_dbgplay("azt3328: ouch, irq handler problem!\n"); + printk(KERN_WARNING "azt3328: irq handler problem!\n"); if (which & IRQ_REC_SOMETHING) - snd_azf3328_dbgplay("azt3328: unknown rec IRQ type occurred, please report!\n"); + snd_azf3328_irq_log_unknown_type(which); } if (status & IRQ_GAMEPORT) snd_azf3328_gameport_interrupt(chip); @@ -2311,6 +2326,10 @@ for (reg = 0; reg < AZF_IO_SIZE_CODEC_PM / 2; ++reg) chip->saved_regs_codec[reg] = inw(chip->codec_io + reg * 2); + + /* manually store the one currently relevant write-only reg, too */ + chip->saved_regs_codec[IDX_IO_6AH / 2] = chip->shadow_reg_codec_6AH; + for (reg = 0; reg < AZF_IO_SIZE_GAME_PM / 2; ++reg) chip->saved_regs_game[reg] = inw(chip->game_io + reg * 2); for (reg = 0; reg < AZF_IO_SIZE_MPU_PM / 2; ++reg) --- azt3328.h.my_org 2008-06-14 08:18:51.000000000 +0200 +++ azt3328.h 2008-06-22 14:03:30.000000000 +0200 @@ -1,7 +1,8 @@ #ifndef __SOUND_AZT3328_H #define __SOUND_AZT3328_H -/* "PU" == "power-up value", as tested on PCI168 PCI rev. 10 */ +/* "PU" == "power-up value", as tested on PCI168 PCI rev. 10 + * "WRITE_ONLY" == register does not indicate actual bit values */ /*** main I/O area port indices ***/ /* (only 0x70 of 0x80 bytes saved/restored by Windows driver) */ @@ -76,7 +77,7 @@ #define SOUNDFORMAT_FLAG_2CHANNELS 0x0020 /* define frequency helpers, for maximum value safety */ -enum { +enum azf_freq_t { #define AZF_FREQ(rate) AZF_FREQ_##rate = rate AZF_FREQ(4000), AZF_FREQ(4800), @@ -150,11 +151,18 @@ #define IO_68_RANDOM_TOGGLE1 0x0100 /* toggles randomly */ #define IO_68_RANDOM_TOGGLE2 0x0200 /* toggles randomly */ /* umm, nope, behaviour of these bits changes depending on what we wrote - * to 0x6b!! */ + * to 0x6b!! + * And they change upon playback/stop, too: + * Writing a value to 0x68 will display this exact value during playback, + * too but when stopped it can fall back to a rather different + * seemingly random value). Hmm, possibly this is a register which + * has a remote shadow which needs proper device supply which only exists + * in case playback is active? Or is this driver-induced? + */ /* this WORD can be set to have bits 0x0028 activated (FIXME: correct??); * actually inhibits PCM playback!!! maybe power management??: */ -#define IDX_IO_6AH 0x6A +#define IDX_IO_6AH 0x6A /* WRITE_ONLY! */ /* bit 5: enabling this will activate permanent counting of bytes 2/3 * at gameport I/O (0xb402/3) (equal values each) and cause * gameport legacy I/O at 0x0200 to be _DISABLED_!

1 0

[alsa-devel] [PATCH] PCI168 snd-azt3328: some more fixups
by Andreas Mohr 23 Jun '08

23 Jun '08

Hi, another update: - fix problem with codec register 0x6a being write-only by adding a software shadow register (caused annoying noise after module loading due to _toggling_ between gameport and audio bits instead of configuring them properly) - rename several "Wave" mixer controls to "PCM", since this is what Wine and several other apps are looking for (IOW, _requiring_) and this is what AC97 specs use as naming, too, thus I'd guess it's what these controls are - cleanup, small optimizations Patch diffed against patched 2.6.26-rc6 (patched with my last patch submission, that is, IOW it should apply to current ALSA tree easily). checkpatch.pl tested, runtime tested. Hopefully this will come in time for 1.0.17 and/or the next kernel merge before my previous patch hits the streets ;) (to have this all in one go) Thanks! Signed-off-by: Andreas Mohr <andi(a)lisas.de> --- azt3328.c.my_org 2008-06-14 08:20:36.000000000 +0200 +++ azt3328.c 2008-06-22 14:05:55.000000000 +0200 @@ -289,6 +289,12 @@ struct pci_dev *pci; int irq; + /* register 0x6a is write-only, thus need to remember setting. + * If we need to add more registers here, then we might try to fold this + * into some transparent combined shadow register handling with + * CONFIG_PM register storage below, but that's slightly difficult. */ + u16 shadow_reg_codec_6AH; + #ifdef CONFIG_PM /* register value containers for power management * Note: not always full I/O range preserved (just like Win driver!) */ @@ -324,21 +330,6 @@ return 0; } -static int -snd_azf3328_io_reg_setw(unsigned reg, u16 mask, int do_set) -{ - u16 prev = inw(reg), new; - - new = (do_set) ? (prev|mask) : (prev & ~mask); - /* we need to always write the new value no matter whether it differs or not, - * since some register bits don't indicate their setting */ - outw(new, reg); - if (new != prev) - return 1; - - return 0; -} - static inline void snd_azf3328_codec_outb(const struct snd_azf3328 *chip, unsigned reg, u8 value) { @@ -662,7 +653,7 @@ "pre 3D", "post 3D" }; struct azf3328_mixer_reg reg; - const char *p = NULL; + const char * const *p = NULL; snd_azf3328_mixer_reg_decode(&reg, kcontrol->private_value); uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; @@ -673,20 +664,20 @@ if (reg.reg == IDX_MIXER_ADVCTL2) { switch(reg.lchan_shift) { case 8: /* modem out sel */ - p = texts1[uinfo->value.enumerated.item]; + p = texts1; break; case 9: /* mono sel source */ - p = texts2[uinfo->value.enumerated.item]; + p = texts2; break; case 15: /* PCM Out Path */ - p = texts4[uinfo->value.enumerated.item]; + p = texts4; break; } } else if (reg.reg == IDX_MIXER_REC_SELECT) - p = texts3[uinfo->value.enumerated.item]; + p = texts3; - strcpy(uinfo->value.enumerated.name, p); + strcpy(uinfo->value.enumerated.name, p[uinfo->value.enumerated.item]); return 0; } @@ -745,9 +736,11 @@ static struct snd_kcontrol_new snd_azf3328_mixer_controls[] __devinitdata = { AZF3328_MIXER_SWITCH("Master Playback Switch", IDX_MIXER_PLAY_MASTER, 15, 1), AZF3328_MIXER_VOL_STEREO("Master Playback Volume", IDX_MIXER_PLAY_MASTER, 0x1f, 1), - AZF3328_MIXER_SWITCH("Wave Playback Switch", IDX_MIXER_WAVEOUT, 15, 1), - AZF3328_MIXER_VOL_STEREO("Wave Playback Volume", IDX_MIXER_WAVEOUT, 0x1f, 1), - AZF3328_MIXER_SWITCH("Wave 3D Bypass Playback Switch", IDX_MIXER_ADVCTL2, 7, 1), + AZF3328_MIXER_SWITCH("PCM Playback Switch", IDX_MIXER_WAVEOUT, 15, 1), + AZF3328_MIXER_VOL_STEREO("PCM Playback Volume", + IDX_MIXER_WAVEOUT, 0x1f, 1), + AZF3328_MIXER_SWITCH("PCM 3D Bypass Playback Switch", + IDX_MIXER_ADVCTL2, 7, 1), AZF3328_MIXER_SWITCH("FM Playback Switch", IDX_MIXER_FMSYNTH, 15, 1), AZF3328_MIXER_VOL_STEREO("FM Playback Volume", IDX_MIXER_FMSYNTH, 0x1f, 1), AZF3328_MIXER_SWITCH("CD Playback Switch", IDX_MIXER_CDAUDIO, 15, 1), @@ -874,7 +867,7 @@ static void snd_azf3328_codec_setfmt(struct snd_azf3328 *chip, unsigned reg, - unsigned int bitrate, + enum azf_freq_t bitrate, unsigned int format_width, unsigned int channels ) @@ -958,15 +951,29 @@ snd_azf3328_codec_setfmt(chip, reg, AZF_FREQ_4000, 8, 1); } +static void +snd_azf3328_codec_reg_6AH_update(struct snd_azf3328 *chip, + unsigned bitmask, + int enable +) +{ + if (enable) + chip->shadow_reg_codec_6AH &= ~bitmask; + else + chip->shadow_reg_codec_6AH |= bitmask; + snd_azf3328_dbgplay("6AH_update mask 0x%04x enable %d: val 0x%04x\n", + bitmask, enable, chip->shadow_reg_codec_6AH); + snd_azf3328_codec_outw(chip, IDX_IO_6AH, chip->shadow_reg_codec_6AH); +} + static inline void snd_azf3328_codec_enable(struct snd_azf3328 *chip, int enable) { + snd_azf3328_dbgplay("codec_enable %d\n", enable); /* no idea what exactly is being done here, but I strongly assume it's * PM related */ - snd_azf3328_io_reg_setw( - chip->codec_io+IDX_IO_6AH, - IO_6A_PAUSE_PLAYBACK_BIT8, - !enable + snd_azf3328_codec_reg_6AH_update( + chip, IO_6A_PAUSE_PLAYBACK_BIT8, enable ); } @@ -1404,10 +1411,8 @@ static inline void snd_azf3328_gameport_axis_circuit_enable(struct snd_azf3328 *chip, int enable) { - snd_azf3328_io_reg_setw( - chip->codec_io+IDX_IO_6AH, - IO_6A_SOMETHING2_GAMEPORT, - !enable + snd_azf3328_codec_reg_6AH_update( + chip, IO_6A_SOMETHING2_GAMEPORT, enable ); } @@ -1525,8 +1530,6 @@ { struct gameport *gp; - int io_port = chip->game_io; - chip->gameport = gp = gameport_allocate_port(); if (!gp) { printk(KERN_ERR "azt3328: cannot alloc memory for gameport\n"); @@ -1536,7 +1539,7 @@ gameport_set_name(gp, "AZF3328 Gameport"); gameport_set_phys(gp, "pci%s/gameport0", pci_name(chip->pci)); gameport_set_dev_parent(gp, &chip->pci->dev); - gp->io = io_port; + gp->io = chip->game_io; gameport_set_port_data(gp, chip); gp->open = snd_azf3328_gameport_open; @@ -1577,6 +1580,15 @@ /******************************************************************/ +static inline void +snd_azf3328_irq_log_unknown_type(u8 which) +{ + printk(KERN_WARNING + "azt3328: unknown IRQ type (%x) occurred, please report!\n", + which + ); +} + static irqreturn_t snd_azf3328_interrupt(int irq, void *dev_id) { @@ -1594,11 +1606,14 @@ )) return IRQ_NONE; /* must be interrupt for another device */ - snd_azf3328_dbgplay("Interrupt %ld!\nIDX_IO_PLAY_FLAGS %04x, IDX_IO_PLAY_IRQTYPE %04x, IDX_IO_IRQSTATUS %04x\n", - irq_count++ /* debug-only */, - snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS), - snd_azf3328_codec_inw(chip, IDX_IO_PLAY_IRQTYPE), - status); + snd_azf3328_dbgplay( + "irq_count %ld! IDX_IO_PLAY_FLAGS %04x, " + "IDX_IO_PLAY_IRQTYPE %04x, IDX_IO_IRQSTATUS %04x\n", + irq_count++ /* debug-only */, + snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS), + snd_azf3328_codec_inw(chip, IDX_IO_PLAY_IRQTYPE), + status + ); if (status & IRQ_TIMER) { /* snd_azf3328_dbgplay("timer %ld\n", @@ -1631,9 +1646,9 @@ ) ); } else - snd_azf3328_dbgplay("azt3328: ouch, irq handler problem!\n"); + printk(KERN_WARNING "azt3328: irq handler problem!\n"); if (which & IRQ_PLAY_SOMETHING) - snd_azf3328_dbgplay("azt3328: unknown play IRQ type occurred, please report!\n"); + snd_azf3328_irq_log_unknown_type(which); } if (status & IRQ_RECORDING) { spin_lock(&chip->reg_lock); @@ -1653,9 +1668,9 @@ ) ); } else - snd_azf3328_dbgplay("azt3328: ouch, irq handler problem!\n"); + printk(KERN_WARNING "azt3328: irq handler problem!\n"); if (which & IRQ_REC_SOMETHING) - snd_azf3328_dbgplay("azt3328: unknown rec IRQ type occurred, please report!\n"); + snd_azf3328_irq_log_unknown_type(which); } if (status & IRQ_GAMEPORT) snd_azf3328_gameport_interrupt(chip); @@ -2311,6 +2326,10 @@ for (reg = 0; reg < AZF_IO_SIZE_CODEC_PM / 2; ++reg) chip->saved_regs_codec[reg] = inw(chip->codec_io + reg * 2); + + /* manually store the one currently relevant write-only reg, too */ + chip->saved_regs_codec[IDX_IO_6AH / 2] = chip->shadow_reg_codec_6AH; + for (reg = 0; reg < AZF_IO_SIZE_GAME_PM / 2; ++reg) chip->saved_regs_game[reg] = inw(chip->game_io + reg * 2); for (reg = 0; reg < AZF_IO_SIZE_MPU_PM / 2; ++reg) --- azt3328.h.my_org 2008-06-14 08:18:51.000000000 +0200 +++ azt3328.h 2008-06-22 14:03:30.000000000 +0200 @@ -1,7 +1,8 @@ #ifndef __SOUND_AZT3328_H #define __SOUND_AZT3328_H -/* "PU" == "power-up value", as tested on PCI168 PCI rev. 10 */ +/* "PU" == "power-up value", as tested on PCI168 PCI rev. 10 + * "WRITE_ONLY" == register does not indicate actual bit values */ /*** main I/O area port indices ***/ /* (only 0x70 of 0x80 bytes saved/restored by Windows driver) */ @@ -76,7 +77,7 @@ #define SOUNDFORMAT_FLAG_2CHANNELS 0x0020 /* define frequency helpers, for maximum value safety */ -enum { +enum azf_freq_t { #define AZF_FREQ(rate) AZF_FREQ_##rate = rate AZF_FREQ(4000), AZF_FREQ(4800), @@ -150,11 +151,18 @@ #define IO_68_RANDOM_TOGGLE1 0x0100 /* toggles randomly */ #define IO_68_RANDOM_TOGGLE2 0x0200 /* toggles randomly */ /* umm, nope, behaviour of these bits changes depending on what we wrote - * to 0x6b!! */ + * to 0x6b!! + * And they change upon playback/stop, too: + * Writing a value to 0x68 will display this exact value during playback, + * too but when stopped it can fall back to a rather different + * seemingly random value). Hmm, possibly this is a register which + * has a remote shadow which needs proper device supply which only exists + * in case playback is active? Or is this driver-induced? + */ /* this WORD can be set to have bits 0x0028 activated (FIXME: correct??); * actually inhibits PCM playback!!! maybe power management??: */ -#define IDX_IO_6AH 0x6A +#define IDX_IO_6AH 0x6A /* WRITE_ONLY! */ /* bit 5: enabling this will activate permanent counting of bytes 2/3 * at gameport I/O (0xb402/3) (equal values each) and cause * gameport legacy I/O at 0x0200 to be _DISABLED_!

1 0

[alsa-devel] RME HDSP + Multiface
by Martin Horn 22 Jun '08

22 Jun '08

Hello everybody, I want to use a RME Multiface soundcard with PCMCIA Cardbus Card on a Dell Notebook with Ubuntu. I installed all alsa drivers and other available tools for the RME card successfully and if I do: aplay -D plughw:1 track1.wav I can hear sound and see playback on PCM channels 1+2 in the hdspmixer, which is a special softwaremixer for this card. Now the card has 8 in and 8 output channels, and though I am able to send the sound from PCM channels 1+2 to all physical outputs via the routing functionalities of the hdspmixer, I need 6 more PCM channels to play through all 8 physical channels independently. If I do: aplay -l or: cat /proc/asound/devices I get only one digital playback device which is the 2 channels already working as plughw:1. Where are my other PCM channels?? Thank you for any help!!! Martin

1 0

[alsa-devel] snd-hda-intel[ALC883] scratching and stuttering sound on MCP78S board
by Hans-Frieder Vogt 22 Jun '08

22 Jun '08

I am experiencing severely scratching and stuttering sound on my nVidia MCP78S (GeForce 8200) based Asus M3N78-EMH HDMI mainboard, which has an ALC883 on board, running with an Athlon X2 4850e dual-core CPU. It sounds, as if the sound buffers are not filled in time and are therefore repeated many times. The problem seems to be kernel / alsa-driver related, because I experience the problem also when running runlevel 1 with only a minimum processes. Strange enough, the sound is OK when I do a larger compilation in parallel (kernel make with make -j 2), but the sound is not OK when I run burnK7 (two instances to load both CPU cores) => What is different in CPU loading or scheduling between these two load cases? I tried several things so far: Debian kernel image 2.6.25-2-amd64 (2.6.25-5) self-compiled 2.6.25.x (with x in nothing to 5), with and without -rt patches self-compiled 2.6.26-rc5, -rc6, -rc7 latest alsa-driver 1.0.17rc2 please find the alsa-info output here: http://pastebin.ca/1052359 attached is my latest kernel setup (2.6.26-rc7, alsa driver modules now replaced by 1.0.17-rc2). Please tell me your suggestions what the problem may be or how I could debug the problem. Thanks. -- -- Hans-Frieder Vogt e-mail: hfvogt <at> gmx .dot. net

1 0

[alsa-devel] [PATCH] alsa: add annotations to bitwise type snd_pcm_hw_param_t
by Harvey Harrison 22 Jun '08

22 Jun '08

Fully half of all alsa sparse warnings are from snd_pcm_hw_param_t degrading to integer type, this goes a long way towards eliminating them. Signed-off-by: Harvey Harrison <harvey.harrison(a)gmail.com> --- include/sound/asound.h | 12 ++++++++---- include/sound/pcm.h | 32 ++++++++++++++++---------------- 2 files changed, 24 insertions(+), 20 deletions(-) diff --git a/include/sound/asound.h b/include/sound/asound.h index 3eaf155..0309da2 100644 --- a/include/sound/asound.h +++ b/include/sound/asound.h @@ -302,6 +302,8 @@ typedef int __bitwise snd_pcm_hw_param_t; #define SNDRV_PCM_HW_PARAM_SUBFORMAT ((__force snd_pcm_hw_param_t) 2) /* Subformat */ #define SNDRV_PCM_HW_PARAM_FIRST_MASK SNDRV_PCM_HW_PARAM_ACCESS #define SNDRV_PCM_HW_PARAM_LAST_MASK SNDRV_PCM_HW_PARAM_SUBFORMAT +#define SNDRV_PCM_HW_PARAM_MASK_INDEX(var) \ + ((__force int)(var) - (__force int)SNDRV_PCM_HW_PARAM_FIRST_MASK) #define SNDRV_PCM_HW_PARAM_SAMPLE_BITS ((__force snd_pcm_hw_param_t) 8) /* Bits per sample */ #define SNDRV_PCM_HW_PARAM_FRAME_BITS ((__force snd_pcm_hw_param_t) 9) /* Bits per frame */ @@ -317,6 +319,8 @@ typedef int __bitwise snd_pcm_hw_param_t; #define SNDRV_PCM_HW_PARAM_TICK_TIME ((__force snd_pcm_hw_param_t) 19) /* Approx tick duration in us */ #define SNDRV_PCM_HW_PARAM_FIRST_INTERVAL SNDRV_PCM_HW_PARAM_SAMPLE_BITS #define SNDRV_PCM_HW_PARAM_LAST_INTERVAL SNDRV_PCM_HW_PARAM_TICK_TIME +#define SNDRV_PCM_HW_PARAM_INTERVAL_INDEX(var) \ + ((__force int)(var) - (__force int)SNDRV_PCM_HW_PARAM_FIRST_INTERVAL) #define SNDRV_PCM_HW_PARAMS_NORESAMPLE (1<<0) /* avoid rate resampling */ @@ -336,11 +340,11 @@ struct snd_mask { struct snd_pcm_hw_params { unsigned int flags; - struct snd_mask masks[SNDRV_PCM_HW_PARAM_LAST_MASK - - SNDRV_PCM_HW_PARAM_FIRST_MASK + 1]; + struct snd_mask masks[ + SNDRV_PCM_HW_PARAM_MASK_INDEX(SNDRV_PCM_HW_PARAM_LAST_MASK) + 1]; struct snd_mask mres[5]; /* reserved masks */ - struct snd_interval intervals[SNDRV_PCM_HW_PARAM_LAST_INTERVAL - - SNDRV_PCM_HW_PARAM_FIRST_INTERVAL + 1]; + struct snd_interval intervals[ + SNDRV_PCM_HW_PARAM_INTERVAL_INDEX(SNDRV_PCM_HW_PARAM_LAST_INTERVAL) + 1]; struct snd_interval ires[9]; /* reserved intervals */ unsigned int rmask; /* W: requested masks */ unsigned int cmask; /* R: changed masks */ diff --git a/include/sound/pcm.h b/include/sound/pcm.h index 51d58cc..5315b53 100644 --- a/include/sound/pcm.h +++ b/include/sound/pcm.h @@ -209,10 +209,10 @@ struct snd_pcm_hw_rule { }; struct snd_pcm_hw_constraints { - struct snd_mask masks[SNDRV_PCM_HW_PARAM_LAST_MASK - - SNDRV_PCM_HW_PARAM_FIRST_MASK + 1]; - struct snd_interval intervals[SNDRV_PCM_HW_PARAM_LAST_INTERVAL - - SNDRV_PCM_HW_PARAM_FIRST_INTERVAL + 1]; + struct snd_mask masks[ + SNDRV_PCM_HW_PARAM_MASK_INDEX(SNDRV_PCM_HW_PARAM_LAST_MASK) + 1]; + struct snd_interval intervals[ + SNDRV_PCM_HW_PARAM_INTERVAL_INDEX(SNDRV_PCM_HW_PARAM_LAST_INTERVAL) + 1]; unsigned int rules_num; unsigned int rules_all; struct snd_pcm_hw_rule *rules; @@ -221,13 +221,13 @@ struct snd_pcm_hw_constraints { static inline struct snd_mask *constrs_mask(struct snd_pcm_hw_constraints *constrs, snd_pcm_hw_param_t var) { - return &constrs->masks[var - SNDRV_PCM_HW_PARAM_FIRST_MASK]; + return &constrs->masks[SNDRV_PCM_HW_PARAM_MASK_INDEX(var)]; } static inline struct snd_interval *constrs_interval(struct snd_pcm_hw_constraints *constrs, snd_pcm_hw_param_t var) { - return &constrs->intervals[var - SNDRV_PCM_HW_PARAM_FIRST_INTERVAL]; + return &constrs->intervals[SNDRV_PCM_HW_PARAM_INTERVAL_INDEX(var)]; } struct snd_ratnum { @@ -761,40 +761,40 @@ static inline void snd_pcm_trigger_done(struct snd_pcm_substream *substream, substream->runtime->trigger_master = master; } -static inline int hw_is_mask(int var) +static inline int hw_is_mask(snd_pcm_hw_param_t var) { - return var >= SNDRV_PCM_HW_PARAM_FIRST_MASK && - var <= SNDRV_PCM_HW_PARAM_LAST_MASK; + return (__force int)var >= (__force int)SNDRV_PCM_HW_PARAM_FIRST_MASK && + (__force int)var <= (__force int)SNDRV_PCM_HW_PARAM_LAST_MASK; } -static inline int hw_is_interval(int var) +static inline int hw_is_interval(snd_pcm_hw_param_t var) { - return var >= SNDRV_PCM_HW_PARAM_FIRST_INTERVAL && - var <= SNDRV_PCM_HW_PARAM_LAST_INTERVAL; + return (__force int)var >= (__force int)SNDRV_PCM_HW_PARAM_FIRST_INTERVAL && + (__force int)var <= (__force int)SNDRV_PCM_HW_PARAM_LAST_INTERVAL; } static inline struct snd_mask *hw_param_mask(struct snd_pcm_hw_params *params, snd_pcm_hw_param_t var) { - return &params->masks[var - SNDRV_PCM_HW_PARAM_FIRST_MASK]; + return &params->masks[SNDRV_PCM_HW_PARAM_MASK_INDEX(var)]; } static inline struct snd_interval *hw_param_interval(struct snd_pcm_hw_params *params, snd_pcm_hw_param_t var) { - return &params->intervals[var - SNDRV_PCM_HW_PARAM_FIRST_INTERVAL]; + return &params->intervals[SNDRV_PCM_HW_PARAM_INTERVAL_INDEX(var)]; } static inline const struct snd_mask *hw_param_mask_c(const struct snd_pcm_hw_params *params, snd_pcm_hw_param_t var) { - return &params->masks[var - SNDRV_PCM_HW_PARAM_FIRST_MASK]; + return &params->masks[SNDRV_PCM_HW_PARAM_MASK_INDEX(var)]; } static inline const struct snd_interval *hw_param_interval_c(const struct snd_pcm_hw_params *params, snd_pcm_hw_param_t var) { - return &params->intervals[var - SNDRV_PCM_HW_PARAM_FIRST_INTERVAL]; + return &params->intervals[SNDRV_PCM_HW_PARAM_INTERVAL_INDEX(var)]; } #define params_access(p) snd_mask_min(hw_param_mask((p), SNDRV_PCM_HW_PARAM_ACCESS)) -- 1.5.6.rc3.295.gdca2e

4 3

[alsa-devel] Nonblocking non-synchronized io plugin?
by Aryeh Leib Taurog 22 Jun '08

22 Jun '08

Hello, I am trying to develop an io plugin to route audio input/output to/from a network application I'm developing. I'm working on openSUSE 10.2, which I think means I'm using ALSA 1.0.13rc2 I am running into two problems: 1. ALSA calls my transfer function with io->nonblock = 0 and seems to be quite picky about the timing of the function. I'm having trouble getting the timing correct, and it seems to be causing ALSA to stop/crash. Is there any way that I can get ALSA to handle the timing for me and call my transfer function with io->nonblock = 1 instead? 2. ALSA seems to require that the capture and playback transfers be synchronized. That seems like a simple enough expectation, but for some reason, I am having a hard time providing this. I tried splitting the capture and playback up in .asoundrc as below, but it doesn't seem to help. (Actually I can't be sure, since it could just be a timing issue). Is there a way to separate the capture from the playback so it won't require them to be synchronized? Basically, I want the ioplug to have as much latitude as possible to just transfer the data and return as soon as it can. I guess if the calls are non-blocking, then they also won't need to be syncronized. Please correct me if I'm wrong. .asoundrc: ----------------------------- pcm.read { type myplug } pcm.write { type myplug } ctl.myapp { type myplug } pcm.myapp { type asym playback.pcm "write" capture.pcm "read" } pcm.!default myapp ------------------------------ Thanks very much Please let me know if I need to clarify anything. Aryeh Leib Taurog

1 0

[alsa-devel] 2.6.26-rc6 snd-pcsp: "Timer resolution is not sufficient"
by Rene Herman 21 Jun '08

21 Jun '08

Hi Stas. What's this? 2.6.26-rc6: === input: PC Speaker as /class/input/input5 PCSP: Timer resolution is not sufficient (4000250nS) PCSP: Make sure you have HPET and ACPI enabled. PC-Speaker initialization failed. pcspkr: probe of pcspkr failed with error -5 === A HPET I do not have, ACPI is enabled and the driver worked fine on a previous -rc. Rene.

2 4

[alsa-devel] Audio only I/O on audio-video things.
by Tom Watson 21 Jun '08

21 Jun '08

In my musings, I bought a video input device that by its nature also has audio (stereo) inputs (the video was baseband NTSC/PAL). I was wondering if one could configure one of these devices to be an 'audio only' and be used with ALSA? I understand that there might be a conflict with which set of drivers (V4L, or ALSA) latches onto the device, but I could control that thru some configuration file. I just need a "cheap" stereo audio input device for my laptop, and since I already have the video unit, and it HAS audio inputs, I thought it might work. The capture device is USB if that matters. Am I dreaming about this being able to work? Is the audio samples that are generated by such a device other than 16bit PCM? Has anyone done such a thing (I don't see it mentioned much)? Any other thoughts? Thanks. -- Tom Watson tsw(a)johana.com

1 0