- Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH 7/xx] wss_lib: use CS4231P instead of AD1848P (kill the AD1848P)
by Krzysztof Helt 17 Jul '08

17 Jul '08

From: Krzysztof Helt <krzysztof.h1(a)wp.pl> Use CS4231P instead of AD1848P (kill the AD1848P). Signed-off-by: Krzysztof Helt <krzysztof.h1(a)wp.pl> --- diff -urp linux-alsa/include/sound/ad1848.h linux-2.6.25/include/sound/ad1848.h --- linux-alsa/include/sound/ad1848.h 2008-07-08 19:37:38.000000000 +0200 +++ linux-2.6.25/include/sound/ad1848.h 2008-07-08 19:29:35.000000000 +0200 @@ -25,15 +25,6 @@ #include "pcm.h" #include <linux/interrupt.h> -/* IO ports */ - -#define AD1848P( chip, x ) ( (chip) -> port + c_d_c_AD1848##x ) - -#define c_d_c_AD1848REGSEL 0 -#define c_d_c_AD1848REG 1 -#define c_d_c_AD1848STATUS 2 -#define c_d_c_AD1848PIO 3 - /* codec registers */ #define AD1848_LEFT_INPUT 0x00 /* left input control */ diff -urp linux-alsa/sound/isa/ad1848/ad1848_lib.c linux-2.6.25/sound/isa/ad1848/ad1848_lib.c --- linux-alsa/sound/isa/ad1848/ad1848_lib.c 2008-07-08 19:37:38.000000000 +0200 +++ linux-2.6.25/sound/isa/ad1848/ad1848_lib.c 2008-07-08 19:43:16.000000000 +0200 @@ -103,7 +103,7 @@ static void snd_ad1848_wait(struct snd_w int timeout; for (timeout = 250; timeout > 0; timeout--) { - if ((inb(AD1848P(chip, REGSEL)) & AD1848_INIT) == 0) + if ((inb(chip->port + CS4231P(REGSEL)) & AD1848_INIT) == 0) break; udelay(100); } @@ -115,12 +115,12 @@ void snd_ad1848_out(struct snd_wss *chip { snd_ad1848_wait(chip); #ifdef CONFIG_SND_DEBUG - if (inb(AD1848P(chip, REGSEL)) & AD1848_INIT) + if (inb(chip->port + CS4231P(REGSEL)) & AD1848_INIT) snd_printk(KERN_WARNING "auto calibration time out - " "reg = 0x%x, value = 0x%x\n", reg, value); #endif - outb(chip->mce_bit | reg, AD1848P(chip, REGSEL)); - outb(chip->image[reg] = value, AD1848P(chip, REG)); + outb(chip->mce_bit | reg, chip->port + CS4231P(REGSEL)); + outb(chip->image[reg] = value, chip->port + CS4231P(REG)); mb(); snd_printdd("codec out - reg 0x%x = 0x%x\n", chip->mce_bit | reg, value); @@ -132,8 +132,8 @@ static void snd_ad1848_dout(struct snd_w unsigned char reg, unsigned char value) { snd_ad1848_wait(chip); - outb(chip->mce_bit | reg, AD1848P(chip, REGSEL)); - outb(value, AD1848P(chip, REG)); + outb(chip->mce_bit | reg, chip->port + CS4231P(REGSEL)); + outb(value, chip->port + CS4231P(REG)); mb(); } @@ -141,37 +141,55 @@ static unsigned char snd_ad1848_in(struc { snd_ad1848_wait(chip); #ifdef CONFIG_SND_DEBUG - if (inb(AD1848P(chip, REGSEL)) & AD1848_INIT) + if (inb(chip->port + CS4231P(REGSEL)) & AD1848_INIT) snd_printk(KERN_WARNING "auto calibration time out - " "reg = 0x%x\n", reg); #endif - outb(chip->mce_bit | reg, AD1848P(chip, REGSEL)); + outb(chip->mce_bit | reg, chip->port + CS4231P(REGSEL)); mb(); - return inb(AD1848P(chip, REG)); + return inb(chip->port + CS4231P(REG)); } #if 0 static void snd_ad1848_debug(struct snd_wss *chip) { - printk("AD1848 REGS: INDEX = 0x%02x ", inb(AD1848P(chip, REGSEL))); - printk(" STATUS = 0x%02x\n", inb(AD1848P(chip, STATUS))); - printk(" 0x00: left input = 0x%02x ", snd_ad1848_in(chip, 0x00)); - printk(" 0x08: playback format = 0x%02x\n", snd_ad1848_in(chip, 0x08)); - printk(" 0x01: right input = 0x%02x ", snd_ad1848_in(chip, 0x01)); - printk(" 0x09: iface (CFIG 1) = 0x%02x\n", snd_ad1848_in(chip, 0x09)); - printk(" 0x02: AUXA left = 0x%02x ", snd_ad1848_in(chip, 0x02)); - printk(" 0x0a: pin control = 0x%02x\n", snd_ad1848_in(chip, 0x0a)); - printk(" 0x03: AUXA right = 0x%02x ", snd_ad1848_in(chip, 0x03)); - printk(" 0x0b: init & status = 0x%02x\n", snd_ad1848_in(chip, 0x0b)); - printk(" 0x04: AUXB left = 0x%02x ", snd_ad1848_in(chip, 0x04)); - printk(" 0x0c: revision & mode = 0x%02x\n", snd_ad1848_in(chip, 0x0c)); - printk(" 0x05: AUXB right = 0x%02x ", snd_ad1848_in(chip, 0x05)); - printk(" 0x0d: loopback = 0x%02x\n", snd_ad1848_in(chip, 0x0d)); - printk(" 0x06: left output = 0x%02x ", snd_ad1848_in(chip, 0x06)); - printk(" 0x0e: data upr count = 0x%02x\n", snd_ad1848_in(chip, 0x0e)); - printk(" 0x07: right output = 0x%02x ", snd_ad1848_in(chip, 0x07)); - printk(" 0x0f: data lwr count = 0x%02x\n", snd_ad1848_in(chip, 0x0f)); + printk(KERN_DEBUG "AD1848 REGS: INDEX = 0x%02x ", + inb(chip->port + CS4231P(REGSEL))); + printk(KERN_DEBUG " STATUS = 0x%02x\n", + inb(chip->port + CS4231P(STATUS))); + printk(KERN_DEBUG " 0x00: left input = 0x%02x ", + snd_ad1848_in(chip, 0x00)); + printk(KERN_DEBUG " 0x08: playback format = 0x%02x\n", + snd_ad1848_in(chip, 0x08)); + printk(KERN_DEBUG " 0x01: right input = 0x%02x ", + snd_ad1848_in(chip, 0x01)); + printk(KERN_DEBUG " 0x09: iface (CFIG 1) = 0x%02x\n", + snd_ad1848_in(chip, 0x09)); + printk(KERN_DEBUG " 0x02: AUXA left = 0x%02x ", + snd_ad1848_in(chip, 0x02)); + printk(KERN_DEBUG " 0x0a: pin control = 0x%02x\n", + snd_ad1848_in(chip, 0x0a)); + printk(KERN_DEBUG " 0x03: AUXA right = 0x%02x ", + snd_ad1848_in(chip, 0x03)); + printk(KERN_DEBUG " 0x0b: init & status = 0x%02x\n", + snd_ad1848_in(chip, 0x0b)); + printk(KERN_DEBUG " 0x04: AUXB left = 0x%02x ", + snd_ad1848_in(chip, 0x04)); + printk(KERN_DEBUG " 0x0c: revision & mode = 0x%02x\n", + snd_ad1848_in(chip, 0x0c)); + printk(KERN_DEBUG " 0x05: AUXB right = 0x%02x ", + snd_ad1848_in(chip, 0x05)); + printk(KERN_DEBUG " 0x0d: loopback = 0x%02x\n", + snd_ad1848_in(chip, 0x0d)); + printk(KERN_DEBUG " 0x06: left output = 0x%02x ", + snd_ad1848_in(chip, 0x06)); + printk(KERN_DEBUG " 0x0e: data upr count = 0x%02x\n", + snd_ad1848_in(chip, 0x0e)); + printk(KERN_DEBUG " 0x07: right output = 0x%02x ", + snd_ad1848_in(chip, 0x07)); + printk(KERN_DEBUG " 0x0f: data lwr count = 0x%02x\n", + snd_ad1848_in(chip, 0x0f)); } #endif @@ -187,16 +205,17 @@ static void snd_ad1848_mce_up(struct snd snd_ad1848_wait(chip); #ifdef CONFIG_SND_DEBUG - if (inb(AD1848P(chip, REGSEL)) & AD1848_INIT) + if (inb(chip->port + CS4231P(REGSEL)) & AD1848_INIT) snd_printk(KERN_WARNING "mce_up - auto calibration time out (0)\n"); #endif spin_lock_irqsave(&chip->reg_lock, flags); chip->mce_bit |= AD1848_MCE; - timeout = inb(AD1848P(chip, REGSEL)); + timeout = inb(chip->port + CS4231P(REGSEL)); if (timeout == 0x80) snd_printk(KERN_WARNING "mce_up [0x%lx]: serious init problem - codec still busy\n", chip->port); if (!(timeout & AD1848_MCE)) - outb(chip->mce_bit | (timeout & 0x1f), AD1848P(chip, REGSEL)); + outb(chip->mce_bit | (timeout & 0x1f), + chip->port + CS4231P(REGSEL)); spin_unlock_irqrestore(&chip->reg_lock, flags); } @@ -207,21 +226,25 @@ static void snd_ad1848_mce_down(struct s spin_lock_irqsave(&chip->reg_lock, flags); for (timeout = 5; timeout > 0; timeout--) - inb(AD1848P(chip, REGSEL)); + inb(chip->port + CS4231P(REGSEL)); /* end of cleanup sequence */ - for (timeout = 12000; timeout > 0 && (inb(AD1848P(chip, REGSEL)) & AD1848_INIT); timeout--) + for (timeout = 12000; + timeout > 0 && (inb(chip->port + CS4231P(REGSEL)) & AD1848_INIT); + timeout--) udelay(100); snd_printdd("(1) timeout = %ld\n", timeout); #ifdef CONFIG_SND_DEBUG - if (inb(AD1848P(chip, REGSEL)) & AD1848_INIT) - snd_printk(KERN_WARNING "mce_down [0x%lx] - auto calibration time out (0)\n", AD1848P(chip, REGSEL)); + if (inb(chip->port + CS4231P(REGSEL)) & AD1848_INIT) + snd_printk(KERN_WARNING + "mce_down [0x%lx] - auto calibration time out (0)\n", + chip->port + CS4231P(REGSEL)); #endif chip->mce_bit &= ~AD1848_MCE; - reg = inb(AD1848P(chip, REGSEL)); - outb(chip->mce_bit | (reg & 0x1f), AD1848P(chip, REGSEL)); + reg = inb(chip->port + CS4231P(REGSEL)); + outb(chip->mce_bit | (reg & 0x1f), chip->port + CS4231P(REGSEL)); if (reg == 0x80) snd_printk(KERN_WARNING "mce_down [0x%lx]: serious init problem - codec still busy\n", chip->port); if ((reg & AD1848_MCE) == 0) { @@ -252,7 +275,8 @@ static void snd_ad1848_mce_down(struct s "mce_down - auto calibration time out (2)\n"); snd_printdd("(4) jiffies = %lu\n", jiffies); - snd_printd("mce_down - exit = 0x%x\n", inb(AD1848P(chip, REGSEL))); + snd_printd("mce_down - exit = 0x%x\n", + inb(chip->port + CS4231P(REGSEL))); } static unsigned int snd_ad1848_get_count(unsigned char format, @@ -412,8 +436,8 @@ static int snd_ad1848_open(struct snd_ws /* ok. now enable and ack CODEC IRQ */ spin_lock_irqsave(&chip->reg_lock, flags); - outb(0, AD1848P(chip, STATUS)); /* clear IRQ */ - outb(0, AD1848P(chip, STATUS)); /* clear IRQ */ + outb(0, chip->port + CS4231P(STATUS)); /* clear IRQ */ + outb(0, chip->port + CS4231P(STATUS)); /* clear IRQ */ chip->image[AD1848_PIN_CTRL] |= AD1848_IRQ_ENABLE; snd_ad1848_out(chip, AD1848_PIN_CTRL, chip->image[AD1848_PIN_CTRL]); spin_unlock_irqrestore(&chip->reg_lock, flags); @@ -431,8 +455,8 @@ static void snd_ad1848_close(struct snd_ return; /* disable IRQ */ spin_lock_irqsave(&chip->reg_lock, flags); - outb(0, AD1848P(chip, STATUS)); /* clear IRQ */ - outb(0, AD1848P(chip, STATUS)); /* clear IRQ */ + outb(0, chip->port + CS4231P(STATUS)); /* clear IRQ */ + outb(0, chip->port + CS4231P(STATUS)); /* clear IRQ */ chip->image[AD1848_PIN_CTRL] &= ~AD1848_IRQ_ENABLE; snd_ad1848_out(chip, AD1848_PIN_CTRL, chip->image[AD1848_PIN_CTRL]); spin_unlock_irqrestore(&chip->reg_lock, flags); @@ -449,8 +473,8 @@ static void snd_ad1848_close(struct snd_ /* clear IRQ again */ spin_lock_irqsave(&chip->reg_lock, flags); - outb(0, AD1848P(chip, STATUS)); /* clear IRQ */ - outb(0, AD1848P(chip, STATUS)); /* clear IRQ */ + outb(0, chip->port + CS4231P(STATUS)); /* clear IRQ */ + outb(0, chip->port + CS4231P(STATUS)); /* clear IRQ */ spin_unlock_irqrestore(&chip->reg_lock, flags); chip->mode = 0; @@ -572,7 +596,7 @@ static irqreturn_t snd_ad1848_interrupt( snd_pcm_period_elapsed(chip->playback_substream); if ((chip->mode & WSS_MODE_RECORD) && chip->capture_substream) snd_pcm_period_elapsed(chip->capture_substream); - outb(0, AD1848P(chip, STATUS)); /* clear global interrupt bit */ + outb(0, chip->port + CS4231P(STATUS)); /* clear global interrupt bit */ return IRQ_HANDLED; } @@ -638,8 +662,8 @@ static void snd_ad1848_resume(struct snd snd_ad1848_thinkpad_twiddle(chip, 1); /* clear any pendings IRQ */ - inb(AD1848P(chip, STATUS)); - outb(0, AD1848P(chip, STATUS)); + inb(chip->port + CS4231P(STATUS)); + outb(0, chip->port + CS4231P(STATUS)); mb(); snd_ad1848_mce_down(chip); @@ -662,7 +686,7 @@ static int snd_ad1848_probe(struct snd_w id = ad1847 = 0; for (i = 0; i < 1000; i++) { mb(); - if (inb(AD1848P(chip, REGSEL)) & AD1848_INIT) + if (inb(chip->port + CS4231P(REGSEL)) & AD1848_INIT) udelay(500); else { spin_lock_irqsave(&chip->reg_lock, flags); @@ -707,8 +731,8 @@ static int snd_ad1848_probe(struct snd_w } } spin_lock_irqsave(&chip->reg_lock, flags); - inb(AD1848P(chip, STATUS)); /* clear any pendings IRQ */ - outb(0, AD1848P(chip, STATUS)); + inb(chip->port + CS4231P(STATUS)); /* clear any pendings IRQ */ + outb(0, chip->port + CS4231P(STATUS)); mb(); spin_unlock_irqrestore(&chip->reg_lock, flags); diff -urp linux-alsa/sound/isa/wss/wss_lib.c linux-2.6.25/sound/isa/wss/wss_lib.c --- linux-alsa/sound/isa/wss/wss_lib.c 2008-07-08 18:02:50.000000000 +0200 +++ linux-2.6.25/sound/isa/wss/wss_lib.c 2008-07-08 19:31:21.000000000 +0200 @@ -164,7 +164,6 @@ static inline void wss_outb(struct snd_w { outb(val, chip->port + offset); } -EXPORT_SYMBOL(snd_wss_out); static inline u8 wss_inb(struct snd_wss *chip, u8 offset) { @@ -228,6 +227,7 @@ void snd_wss_out(struct snd_wss *chip, u snd_printdd("codec out - reg 0x%x = 0x%x\n", chip->mce_bit | reg, value); } +EXPORT_SYMBOL(snd_wss_out); unsigned char snd_wss_in(struct snd_wss *chip, unsigned char reg) { ---------------------------------------------------------------------- Najciekawsze miejsca w Polsce i na swiecie! Zobacz >>> http://link.interia.pl/f1e60

1 0

[alsa-devel] [PATCH 6/xx] wss_lib: replace ad1848 mixer element macros with wss ones
by Krzysztof Helt 17 Jul '08

17 Jul '08

From: Krzysztof Helt <krzysztof.h1(a)wp.pl> Use the wss macros instead of ad1848 ones. Signed-off-by: Krzysztof Helt <krzysztof.h1(a)wp.pl> --- diff -urp linux-alsa/include/sound/ad1848.h linux-2.6.25/include/sound/ad1848.h --- linux-alsa/include/sound/ad1848.h 2008-07-08 18:15:01.000000000 +0200 +++ linux-2.6.25/include/sound/ad1848.h 2008-07-08 19:05:46.000000000 +0200 @@ -126,36 +126,4 @@ int snd_ad1848_pcm(struct snd_wss *chip, const struct snd_pcm_ops *snd_ad1848_get_pcm_ops(int direction); int snd_ad1848_mixer(struct snd_wss *chip); -/* exported mixer stuffs */ -enum { AD1848_MIX_SINGLE, AD1848_MIX_DOUBLE, AD1848_MIX_CAPTURE }; - -#define AD1848_MIXVAL_SINGLE(reg, shift, mask, invert) \ - ((reg) | ((shift) << 8) | ((mask) << 16) | ((invert) << 24)) -#define AD1848_MIXVAL_DOUBLE(left_reg, right_reg, shift_left, shift_right, mask, invert) \ - ((left_reg) | ((right_reg) << 8) | ((shift_left) << 16) | ((shift_right) << 19) | ((mask) << 24) | ((invert) << 22)) - -/* for ease of use */ -struct ad1848_mix_elem { - const char *name; - int index; - int type; - unsigned long private_value; - const unsigned int *tlv; -}; - -#define AD1848_SINGLE(xname, xindex, reg, shift, mask, invert) \ -{ .name = xname, \ - .index = xindex, \ - .type = AD1848_MIX_SINGLE, \ - .private_value = AD1848_MIXVAL_SINGLE(reg, shift, mask, invert) } - -#define AD1848_DOUBLE(xname, xindex, left_reg, right_reg, shift_left, shift_right, mask, invert) \ -{ .name = xname, \ - .index = xindex, \ - .type = AD1848_MIX_DOUBLE, \ - .private_value = AD1848_MIXVAL_DOUBLE(left_reg, right_reg, shift_left, shift_right, mask, invert) } - -int snd_ad1848_add_ctl_elem(struct snd_wss *chip, - const struct ad1848_mix_elem *c); - #endif /* __SOUND_AD1848_H */ diff -urp linux-alsa/sound/isa/ad1848/ad1848_lib.c linux-2.6.25/sound/isa/ad1848/ad1848_lib.c --- linux-alsa/sound/isa/ad1848/ad1848_lib.c 2008-07-08 18:15:01.000000000 +0200 +++ linux-2.6.25/sound/isa/ad1848/ad1848_lib.c 2008-07-08 19:05:58.000000000 +0200 @@ -1168,86 +1168,57 @@ static int snd_ad1848_put_double(struct return change; } -/* - */ -int snd_ad1848_add_ctl_elem(struct snd_wss *chip, - const struct ad1848_mix_elem *c) -{ - static struct snd_kcontrol_new newctls[] = { - [AD1848_MIX_SINGLE] = { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .info = snd_ad1848_info_single, - .get = snd_ad1848_get_single, - .put = snd_ad1848_put_single, - }, - [AD1848_MIX_DOUBLE] = { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .info = snd_ad1848_info_double, - .get = snd_ad1848_get_double, - .put = snd_ad1848_put_double, - }, - [AD1848_MIX_CAPTURE] = { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .info = snd_ad1848_info_mux, - .get = snd_ad1848_get_mux, - .put = snd_ad1848_put_mux, - }, - }; - struct snd_kcontrol *ctl; - int err; - - ctl = snd_ctl_new1(&newctls[c->type], chip); - if (! ctl) - return -ENOMEM; - strlcpy(ctl->id.name, c->name, sizeof(ctl->id.name)); - ctl->id.index = c->index; - ctl->private_value = c->private_value; - if (c->tlv) { - ctl->vd[0].access |= SNDRV_CTL_ELEM_ACCESS_TLV_READ; - ctl->tlv.p = c->tlv; - } - if ((err = snd_ctl_add(chip->card, ctl)) < 0) - return err; - return 0; -} - -EXPORT_SYMBOL(snd_ad1848_add_ctl_elem); - static const DECLARE_TLV_DB_SCALE(db_scale_6bit, -9450, 150, 0); static const DECLARE_TLV_DB_SCALE(db_scale_5bit_12db_max, -3450, 150, 0); static const DECLARE_TLV_DB_SCALE(db_scale_rec_gain, 0, 150, 0); #define AD1848_SINGLE_TLV(xname, xindex, reg, shift, mask, invert, xtlv) \ -{ .name = xname, \ - .index = xindex, \ - .type = AD1848_MIX_SINGLE, \ - .private_value = AD1848_MIXVAL_SINGLE(reg, shift, mask, invert), \ - .tlv = xtlv } +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_TLV_READ, \ + .name = xname, .index = xindex, \ + .info = snd_ad1848_info_single, \ + .get = snd_ad1848_get_single, .put = snd_ad1848_put_single, \ + .private_value = reg | (shift << 8) | (mask << 16) | (invert << 24), \ + .tlv = { .p = (xtlv) } } #define AD1848_DOUBLE_TLV(xname, xindex, left_reg, right_reg, shift_left, shift_right, mask, invert, xtlv) \ -{ .name = xname, \ - .index = xindex, \ - .type = AD1848_MIX_DOUBLE, \ - .private_value = AD1848_MIXVAL_DOUBLE(left_reg, right_reg, shift_left, shift_right, mask, invert), \ - .tlv = xtlv } - -static struct ad1848_mix_elem snd_ad1848_controls[] = { -AD1848_DOUBLE("PCM Playback Switch", 0, AD1848_LEFT_OUTPUT, AD1848_RIGHT_OUTPUT, 7, 7, 1, 1), -AD1848_DOUBLE_TLV("PCM Playback Volume", 0, AD1848_LEFT_OUTPUT, AD1848_RIGHT_OUTPUT, 0, 0, 63, 1, +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_TLV_READ, \ + .name = xname, .index = xindex, \ + .info = snd_ad1848_info_double, \ + .get = snd_ad1848_get_double, .put = snd_ad1848_put_double, \ + .private_value = left_reg | (right_reg << 8) | (shift_left << 16) | \ + (shift_right << 19) | (mask << 24) | (invert << 22), \ + .tlv = { .p = (xtlv) } } + + +static struct snd_kcontrol_new snd_ad1848_controls[] = { +WSS_DOUBLE("PCM Playback Switch", 0, AD1848_LEFT_OUTPUT, AD1848_RIGHT_OUTPUT, + 7, 7, 1, 1), +AD1848_DOUBLE_TLV("PCM Playback Volume", 0, + AD1848_LEFT_OUTPUT, AD1848_RIGHT_OUTPUT, 0, 0, 63, 1, db_scale_6bit), -AD1848_DOUBLE("Aux Playback Switch", 0, AD1848_AUX1_LEFT_INPUT, AD1848_AUX1_RIGHT_INPUT, 7, 7, 1, 1), -AD1848_DOUBLE_TLV("Aux Playback Volume", 0, AD1848_AUX1_LEFT_INPUT, AD1848_AUX1_RIGHT_INPUT, 0, 0, 31, 1, +WSS_DOUBLE("Aux Playback Switch", 0, + AD1848_AUX1_LEFT_INPUT, AD1848_AUX1_RIGHT_INPUT, 7, 7, 1, 1), +AD1848_DOUBLE_TLV("Aux Playback Volume", 0, + AD1848_AUX1_LEFT_INPUT, AD1848_AUX1_RIGHT_INPUT, 0, 0, 31, 1, db_scale_5bit_12db_max), -AD1848_DOUBLE("Aux Playback Switch", 1, AD1848_AUX2_LEFT_INPUT, AD1848_AUX2_RIGHT_INPUT, 7, 7, 1, 1), -AD1848_DOUBLE_TLV("Aux Playback Volume", 1, AD1848_AUX2_LEFT_INPUT, AD1848_AUX2_RIGHT_INPUT, 0, 0, 31, 1, +WSS_DOUBLE("Aux Playback Switch", 1, + AD1848_AUX2_LEFT_INPUT, AD1848_AUX2_RIGHT_INPUT, 7, 7, 1, 1), +AD1848_DOUBLE_TLV("Aux Playback Volume", 1, + AD1848_AUX2_LEFT_INPUT, AD1848_AUX2_RIGHT_INPUT, 0, 0, 31, 1, db_scale_5bit_12db_max), -AD1848_DOUBLE_TLV("Capture Volume", 0, AD1848_LEFT_INPUT, AD1848_RIGHT_INPUT, 0, 0, 15, 0, +AD1848_DOUBLE_TLV("Capture Volume", 0, + AD1848_LEFT_INPUT, AD1848_RIGHT_INPUT, 0, 0, 15, 0, db_scale_rec_gain), { .name = "Capture Source", - .type = AD1848_MIX_CAPTURE, + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .info = snd_ad1848_info_mux, + .get = snd_ad1848_get_mux, + .put = snd_ad1848_put_mux, }, -AD1848_SINGLE("Loopback Capture Switch", 0, AD1848_LOOPBACK, 0, 1, 0), +WSS_SINGLE("Loopback Capture Switch", 0, AD1848_LOOPBACK, 0, 1, 0), AD1848_SINGLE_TLV("Loopback Capture Volume", 0, AD1848_LOOPBACK, 1, 63, 0, db_scale_6bit), }; @@ -1266,9 +1237,12 @@ int snd_ad1848_mixer(struct snd_wss *chi strcpy(card->mixername, pcm->name); - for (idx = 0; idx < ARRAY_SIZE(snd_ad1848_controls); idx++) - if ((err = snd_ad1848_add_ctl_elem(chip, &snd_ad1848_controls[idx])) < 0) + for (idx = 0; idx < ARRAY_SIZE(snd_ad1848_controls); idx++) { + err = snd_ctl_add(card, + snd_ctl_new1(&snd_ad1848_controls[idx], chip)); + if (err < 0) return err; + } return 0; } diff -urp linux-alsa/sound/isa/cmi8330.c linux-2.6.25/sound/isa/cmi8330.c --- linux-alsa/sound/isa/cmi8330.c 2008-07-08 18:15:01.000000000 +0200 +++ linux-2.6.25/sound/isa/cmi8330.c 2008-07-08 19:22:23.000000000 +0200 @@ -174,32 +174,48 @@ MODULE_DEVICE_TABLE(pnp_card, snd_cmi833 #endif -static struct ad1848_mix_elem snd_cmi8330_controls[] __devinitdata = { -AD1848_DOUBLE("Master Playback Volume", 0, CMI8330_MASTVOL, CMI8330_MASTVOL, 4, 0, 15, 0), -AD1848_SINGLE("Loud Playback Switch", 0, CMI8330_MUTEMUX, 6, 1, 1), -AD1848_DOUBLE("PCM Playback Switch", 0, AD1848_LEFT_OUTPUT, AD1848_RIGHT_OUTPUT, 7, 7, 1, 1), -AD1848_DOUBLE("PCM Playback Volume", 0, AD1848_LEFT_OUTPUT, AD1848_RIGHT_OUTPUT, 0, 0, 63, 1), -AD1848_DOUBLE("Line Playback Switch", 0, CMI8330_MUTEMUX, CMI8330_MUTEMUX, 4, 3, 1, 0), -AD1848_DOUBLE("Line Playback Volume", 0, CMI8330_LINVOL, CMI8330_LINVOL, 4, 0, 15, 0), -AD1848_DOUBLE("Line Capture Switch", 0, CMI8330_RMUX3D, CMI8330_RMUX3D, 2, 1, 1, 0), -AD1848_DOUBLE("Line Capture Volume", 0, CMI8330_LINGAIN, CMI8330_LINGAIN, 4, 0, 15, 0), -AD1848_DOUBLE("CD Playback Switch", 0, CMI8330_MUTEMUX, CMI8330_MUTEMUX, 2, 1, 1, 0), -AD1848_DOUBLE("CD Capture Switch", 0, CMI8330_RMUX3D, CMI8330_RMUX3D, 4, 3, 1, 0), -AD1848_DOUBLE("CD Playback Volume", 0, CMI8330_CDINVOL, CMI8330_CDINVOL, 4, 0, 15, 0), -AD1848_DOUBLE("CD Capture Volume", 0, CMI8330_CDINGAIN, CMI8330_CDINGAIN, 4, 0, 15, 0), -AD1848_SINGLE("Mic Playback Switch", 0, CMI8330_MUTEMUX, 0, 1, 0), -AD1848_SINGLE("Mic Playback Volume", 0, CMI8330_OUTPUTVOL, 0, 7, 0), -AD1848_SINGLE("Mic Capture Switch", 0, CMI8330_RMUX3D, 0, 1, 0), -AD1848_SINGLE("Mic Capture Volume", 0, CMI8330_OUTPUTVOL, 5, 7, 0), -AD1848_DOUBLE("Wavetable Playback Switch", 0, CMI8330_RECMUX, CMI8330_RECMUX, 1, 0, 1, 0), -AD1848_DOUBLE("Wavetable Playback Volume", 0, CMI8330_WAVVOL, CMI8330_WAVVOL, 4, 0, 15, 0), -AD1848_DOUBLE("Wavetable Capture Switch", 0, CMI8330_RECMUX, CMI8330_RECMUX, 5, 4, 1, 0), -AD1848_DOUBLE("Wavetable Capture Volume", 0, CMI8330_WAVGAIN, CMI8330_WAVGAIN, 4, 0, 15, 0), -AD1848_SINGLE("3D Control - Switch", 0, CMI8330_RMUX3D, 5, 1, 1), -AD1848_SINGLE("PC Speaker Playback Volume", 0, CMI8330_OUTPUTVOL, 3, 3, 0), -AD1848_SINGLE("FM Playback Switch", 0, CMI8330_RECMUX, 3, 1, 1), -AD1848_SINGLE(SNDRV_CTL_NAME_IEC958("Input ",CAPTURE,SWITCH), 0, CMI8330_RMUX3D, 7, 1, 1), -AD1848_SINGLE(SNDRV_CTL_NAME_IEC958("Input ",PLAYBACK,SWITCH), 0, CMI8330_MUTEMUX, 7, 1, 1), +static struct snd_kcontrol_new snd_cmi8330_controls[] __devinitdata = { +WSS_DOUBLE("Master Playback Volume", 0, CMI8330_MASTVOL, CMI8330_MASTVOL, + 4, 0, 15, 0), +WSS_SINGLE("Loud Playback Switch", 0, CMI8330_MUTEMUX, 6, 1, 1), +WSS_DOUBLE("PCM Playback Switch", 0, AD1848_LEFT_OUTPUT, AD1848_RIGHT_OUTPUT, + 7, 7, 1, 1), +WSS_DOUBLE("PCM Playback Volume", 0, AD1848_LEFT_OUTPUT, AD1848_RIGHT_OUTPUT, + 0, 0, 63, 1), +WSS_DOUBLE("Line Playback Switch", 0, CMI8330_MUTEMUX, CMI8330_MUTEMUX, + 4, 3, 1, 0), +WSS_DOUBLE("Line Playback Volume", 0, CMI8330_LINVOL, CMI8330_LINVOL, + 4, 0, 15, 0), +WSS_DOUBLE("Line Capture Switch", 0, CMI8330_RMUX3D, CMI8330_RMUX3D, + 2, 1, 1, 0), +WSS_DOUBLE("Line Capture Volume", 0, CMI8330_LINGAIN, CMI8330_LINGAIN, + 4, 0, 15, 0), +WSS_DOUBLE("CD Playback Switch", 0, CMI8330_MUTEMUX, CMI8330_MUTEMUX, + 2, 1, 1, 0), +WSS_DOUBLE("CD Capture Switch", 0, CMI8330_RMUX3D, CMI8330_RMUX3D, 4, 3, 1, 0), +WSS_DOUBLE("CD Playback Volume", 0, CMI8330_CDINVOL, CMI8330_CDINVOL, + 4, 0, 15, 0), +WSS_DOUBLE("CD Capture Volume", 0, CMI8330_CDINGAIN, CMI8330_CDINGAIN, + 4, 0, 15, 0), +WSS_SINGLE("Mic Playback Switch", 0, CMI8330_MUTEMUX, 0, 1, 0), +WSS_SINGLE("Mic Playback Volume", 0, CMI8330_OUTPUTVOL, 0, 7, 0), +WSS_SINGLE("Mic Capture Switch", 0, CMI8330_RMUX3D, 0, 1, 0), +WSS_SINGLE("Mic Capture Volume", 0, CMI8330_OUTPUTVOL, 5, 7, 0), +WSS_DOUBLE("Wavetable Playback Switch", 0, CMI8330_RECMUX, CMI8330_RECMUX, + 1, 0, 1, 0), +WSS_DOUBLE("Wavetable Playback Volume", 0, CMI8330_WAVVOL, CMI8330_WAVVOL, + 4, 0, 15, 0), +WSS_DOUBLE("Wavetable Capture Switch", 0, CMI8330_RECMUX, CMI8330_RECMUX, + 5, 4, 1, 0), +WSS_DOUBLE("Wavetable Capture Volume", 0, CMI8330_WAVGAIN, CMI8330_WAVGAIN, + 4, 0, 15, 0), +WSS_SINGLE("3D Control - Switch", 0, CMI8330_RMUX3D, 5, 1, 1), +WSS_SINGLE("PC Speaker Playback Volume", 0, CMI8330_OUTPUTVOL, 3, 3, 0), +WSS_SINGLE("FM Playback Switch", 0, CMI8330_RECMUX, 3, 1, 1), +WSS_SINGLE(SNDRV_CTL_NAME_IEC958("Input ", CAPTURE, SWITCH), 0, CMI8330_RMUX3D, + 7, 1, 1), +WSS_SINGLE(SNDRV_CTL_NAME_IEC958("Input ", PLAYBACK, SWITCH), 0, + CMI8330_MUTEMUX, 7, 1, 1), }; #ifdef ENABLE_SB_MIXER @@ -268,7 +284,10 @@ static int __devinit snd_cmi8330_mixer(s strcpy(card->mixername, "CMI8330/C3D"); for (idx = 0; idx < ARRAY_SIZE(snd_cmi8330_controls); idx++) { - if ((err = snd_ad1848_add_ctl_elem(acard->wss, &snd_cmi8330_controls[idx])) < 0) + err = snd_ctl_add(card, + snd_ctl_new1(&snd_cmi8330_controls[idx], + acard->wss)); + if (err < 0) return err; } diff -urp linux-alsa/sound/isa/sgalaxy.c linux-2.6.25/sound/isa/sgalaxy.c --- linux-alsa/sound/isa/sgalaxy.c 2008-07-08 18:15:01.000000000 +0200 +++ linux-2.6.25/sound/isa/sgalaxy.c 2008-07-08 19:20:27.000000000 +0200 @@ -175,9 +175,9 @@ static int __devinit snd_sgalaxy_detect( return snd_sgalaxy_setup_wss(wssport[dev], irq, dma); } -static struct ad1848_mix_elem snd_sgalaxy_controls[] = { -AD1848_DOUBLE("Aux Playback Switch", 0, SGALAXY_AUXC_LEFT, SGALAXY_AUXC_RIGHT, 7, 7, 1, 1), -AD1848_DOUBLE("Aux Playback Volume", 0, SGALAXY_AUXC_LEFT, SGALAXY_AUXC_RIGHT, 0, 0, 31, 0) +static struct snd_kcontrol_new snd_sgalaxy_controls[] = { +WSS_DOUBLE("Aux Playback Switch", 0, SGALAXY_AUXC_LEFT, SGALAXY_AUXC_RIGHT, 7, 7, 1, 1), +WSS_DOUBLE("Aux Playback Volume", 0, SGALAXY_AUXC_LEFT, SGALAXY_AUXC_RIGHT, 0, 0, 31, 0) }; static int __devinit snd_sgalaxy_mixer(struct snd_wss *chip) @@ -210,7 +210,9 @@ static int __devinit snd_sgalaxy_mixer(s return err; /* build AUX2 input */ for (idx = 0; idx < ARRAY_SIZE(snd_sgalaxy_controls); idx++) { - if ((err = snd_ad1848_add_ctl_elem(chip, &snd_sgalaxy_controls[idx])) < 0) + err = snd_ctl_add(card, + snd_ctl_new1(&snd_sgalaxy_controls[idx], chip)); + if (err < 0) return err; } return 0; ---------------------------------------------------------------------- Zobacz cala prawde o Lukaszu Podolskim! kliknij >>> http://link.interia.pl/f1e57

1 0

[alsa-devel] ASoC: codec registers with more than 16 bits.
by Daniel Ribeiro 17 Jul '08

17 Jul '08

Hello alsa experts, I am working on a ASoC codec driver for the Motorola PCAP2 ASIC for the OpenEZX project, and i am having some trouble... PCAP2 has 25 bits registers, I access these registers via 32 bits SPI writes/reads, but soc-core/soc-dapm expects codec registers values to fit on 'unsigned short' vars. Is there any reason to this limit? I am currently faking the registers to always fit 16 bits, but this looks ugly. Would a patch to soc-core/dapm to extend this limit to 32 bits registers be accepted? Thanks! -- Daniel Ribeiro

2 1

[PATCH] ALSA: ens1370: SRC stands for Sample Rate Converter
by Rene Herman 17 Jul '08

17 Jul '08

Signed-off-by: Rene Herman <rene.herman(a)gmail.com> --- sound/pci/ens1370.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c index 72d85a5..38808fb 100644 --- a/sound/pci/ens1370.c +++ b/sound/pci/ens1370.c @@ -522,7 +522,7 @@ static unsigned int snd_es1371_wait_src_ready(struct ensoniq * ensoniq) return r; cond_resched(); } - snd_printk(KERN_ERR "wait source ready timeout 0x%lx [0x%x]\n", + snd_printk(KERN_ERR "wait src ready timeout 0x%lx [0x%x]\n", ES_REG(ensoniq, 1371_SMPRATE), r); return 0; } -- 1.5.5 --------------080607050808050505040903--

1 0

Re: [alsa-devel] [Alsa-user] is this card supported by ALSA?
by Rene Herman 17 Jul '08

17 Jul '08

On 16-07-08 22:30, Sergei Steshenko wrote: > Maybe Rene meant '-R' (reverse patch) rather than '-r rejects_file'. Hey, I said I made at least one error per post -- there wouldn't be any logic in that all of a sudden not being so for the 3rd correction to another post since that, obviously, is a post in itself. I wonder what the error in this one is going to be. I should probably start putting in deliberate typos in an attempt to avoid more sarious damage. Or maybe the sleep thing will have actually worked... Rene.

1 0

Re: [alsa-devel] [Alsa-user] is this card supported by ALSA?
by Landis McGauhey 16 Jul '08

16 Jul '08

> From: steshenko_sergei(a)list.ru > To: b3zdomny(a)hotmail.com > CC: rene.herman(a)keyaccess.nl; tiwai(a)suse.de; alsa-user(a)lists.sourceforge.net; alsa-devel(a)alsa-project.org; alsa(a)sc8-sf-spam2.sourceforge.net > Subject: Re[2]: [Alsa-user] is this card supported by ALSA? > Date: Thu, 17 Jul 2008 00:30:15 +0400 <snip> > > Maybe Rene meant '-R' (reverse patch) rather than '-r rejects_file'. > > Regards, > Sergei. > > Spasibo, Sergei. Yes, that's what I'm thinking, too. Poka, Landis _________________________________________________________________ Use video conversation to talk face-to-face with Windows Live Messenger. http://www.windowslive.com/messenger/connect_your_way.html?ocid=TXT_TAGLM_W…

1 0

[alsa-devel] Still have choppy audio using 1.0.17
by Gustavo da Silva Serra 16 Jul '08

16 Jul '08

I have been trying for many weeks to solve this problem, but with no success. After updating to Alsa 1.0.17, which include changes to aloop, I still have choppy audio. I will try to summarize what happens: - I need to use aloop, if I change to a sound card all the problems are gone; - After some time of continuous play, applications start to reproduce choppy audio. Choppy audio doesn't happens all the time; - If I repeatedly start and stop my sound capture application choppy audio occur sooner; - Start/stop my application restores the sound quality (after some tryies); - This happens with ALSA applications (xine, vlc) and OSS emulated; - I have tryied many period_size and buffer_size in asound.conf, now I am using 960 for period and 3840 for buffer. As I decrease period size, the audio quality improves, but choppy audio still happens; - I test for overrun but no errors occur. - I am using block mode, interleaved, 44100, 16 bit, 2 channels - I am using dmix, dsnoop, removing them does not correct the audio These are some of the information I have, I don't know if is is enough. If necessary I can provide any other information. What do you suggest that I do? Are there any known issues or configuration requirements? Thanks in advance.

3 17

[alsa-devel] CS5530 on Geode GX1 won't work
by georg 16 Jul '08

16 Jul '08

Hello As Alsa-User mailinglist could not help, I hopefully sent my mail to this list now. I am playing around, trying to get this sound card working for a while now. The Hardware is an embedded Geode GX1. Kernel is vanilla 2.6.25.9. Problem: ------------------------ 8<------------------------- root@tux:~# aplay foo.wav ALSA lib pcm_dmix.c:866:(snd_pcm_dmix_open) unable to open slave aplay: main:546: audio open error: Device or resource busy root@tux:~# lspci ... 00:12.2 IDE interface: Cyrix Corporation 5530 IDE [Kahlua] 00:12.3 Multimedia audio controller: Cyrix Corporation 5530 Audio [Kahlua] 00:12.4 VGA compatible controller: Cyrix Corporation 5530 Video [Kahlua] ... root@tux:~# lsmod Module Size Used by snd_cs5530 4388 0 snd_sb16_dsp 8608 1 snd_cs5530 snd_sb_common 14432 2 snd_cs5530,snd_sb16_dsp snd_pcm 63208 1 snd_sb16_dsp snd_timer 19492 1 snd_pcm snd 38804 5 snd_cs5530,snd_sb16_dsp,snd_sb_common,snd_pcm,snd_timer snd_page_alloc 7752 1 snd_pcm dmesg: ... CS5530: XpressAudio at 0x220 CS5530: MPU at 0x330 CS5530: IRQ: 5 DMA8: 1 DMA16: 5 ... root@tux:~# cat /proc/interrupts CPU0 0: 249130 XT-PIC-XT timer 1: 2 XT-PIC-XT i8042 2: 0 XT-PIC-XT cascade 5: 0 XT-PIC-XT SoundBlaster 9: 184193 XT-PIC-XT ohci_hcd:usb1, eth0 12: 1 XT-PIC-XT 14: 41917 XT-PIC-XT ide0 root@tux:~# strace aplay foo.wav ... shmctl(32768, 0x102 /* SHM_??? */, 0xbfc94a68) = 0 shmctl(32768, 0x101 /* SHM_??? */, 0xbfc94a68) = 0 open("/dev/snd/controlC0", O_RDWR) = 3 ioctl(3, USBDEVFS_CONTROL, 0xbfc947a8) = 0 ioctl(3, 0x40045532, 0xbfc947a4) = 0 open("/dev/snd/pcmC0D0p", O_RDWR|O_NONBLOCK) = -1 EBUSY (Device or resource busy) close(3) = 0 write(2, "ALSA lib pcm_dmix.c:866:(snd_pcm"..., 44ALSA lib pcm_dmix.c:866: (snd_pcm_dmix_open) ) = 44 write(2, "unable to open slave", 20unable to open slave) = 20 write(2, "\n", 1) = 1 ... root@tux:~# lsof | grep -i pcmC0D0p root@tux:~# root@tux:~# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Audio [CS5530 Audio], device 0: SB16 DSP [DSP v4.12] Subdevices: 1/1 Subdevice #0: subdevice #0 root@tux:~# aplay -L null Discard all samples (playback) or generate zero samples (capture) ------------------------ 8<------------------------- No one is using the sound device. But strace shows error 'Device or resource busy'. The thing that confuses me is the output of 'aplay -L'... Any help is appreciated :-)... Bye Georg

3 3

Re: [alsa-devel] softvol chokes on snd_pcm_rewind
by Stewart Adam 16 Jul '08

16 Jul '08

Hi, I'm using Fedora 10 development/rawhide and I'm having the same problem with softvol and alsa-lib-1.0.16 - snd_pcm_rewind() makes the audio distorted and very high-pitched. Is there a way I could help debug this? Regards, Stewart

1 0

Re: [alsa-devel] [Alsa-user] is this card supported by ALSA?
by Landis McGauhey 16 Jul '08

16 Jul '08

> From: steshenko_sergei(a)list.ru > To: rene.herman(a)keyaccess.nl > CC: b3zdomny(a)hotmail.com; tiwai(a)suse.de; alsa-user(a)lists.sourceforge.net; alsa-devel(a)alsa-project.org; ALSA(a)sc8-sf-spam2.sourceforge.net > Subject: Re[2]: [Alsa-user] is this card supported by ALSA? > Date: Wed, 16 Jul 2008 19:12:26 +0400 > > > > -----Original Message----- > From: Rene Herman <rene.herman(a)keyaccess.nl> > To: Landis McGauhey <b3zdomny(a)hotmail.com> > Date: Wed, 16 Jul 2008 16:44:11 +0200 > Subject: Re: [Alsa-user] is this card supported by ALSA? > > > > > On 16-07-08 16:40, Rene Herman wrote: > > > > > # moodprobe -r ens1371-ac97_reset_hack.diff > > > # moodprobe -r ens1371-ac97.diff > > > > I'm getting really sick of the fact that I seem to need to make at least > > one typo or other small error per post. "modprobe" ofcourse. > > > > Rene. > > > > > > Actually, 'moodprobe' is a really nice word :-). I love it ! > > Probably Linux distros should symlink ln -s modprobe moodprobe . > > --Sergei. LOL! Spasibo, Sergei. In that case, my psychiatrist will diagnose me as having a moodprobe disorder rather than a mood disorder! ;) _________________________________________________________________ Keep your kids safer online with Windows Live Family Safety. http://www.windowslive.com/family_safety/overview.html?ocid=TXT_TAGLM_WL_fa…

1 0