- Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH] ALSA: usb-audio: add support for E-Mu Tracker Pre
by Eran Tromer 26 Sep '08

26 Sep '08

Add support for the E-Mu "Tracker Pre" USB sound card, following the example of the (very similar) E-Mu 0202 and E-Mu 0404 USB. As with the 0202 and 0404 USB, functionality is very limited: just a couple of sample rates, no volume/mute control, etc. Signed-off-by: Eran Tromer <eran(a)tromer.org> --- sound/usb/usbaudio.c | 3 ++- sound/usb/usbquirks.h | 7 +++++++ 2 files changed, 9 insertions(+), 1 deletions(-) diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c index 410be4a..0cc6fd5 100644 --- a/sound/usb/usbaudio.c +++ b/sound/usb/usbaudio.c @@ -481,7 +481,7 @@ static int retire_playback_sync_urb_hs(struct snd_usb_substream *subs, } /* - * process after E-Mu 0202/0404 high speed playback sync complete + * process after E-Mu 0202/0404/Tracker Pre high speed playback sync complete * * These devices return the number of samples per packet instead of the number * of samples per microframe. @@ -2261,6 +2261,7 @@ static void init_substream(struct snd_usb_stream *as, int stream, struct audiofo switch (as->chip->usb_id) { case USB_ID(0x041e, 0x3f02): /* E-Mu 0202 USB */ case USB_ID(0x041e, 0x3f04): /* E-Mu 0404 USB */ + case USB_ID(0x041e, 0x3f0a): /* E-Mu Tracker Pre */ subs->ops.retire_sync = retire_playback_sync_urb_hs_emu; break; } diff --git a/sound/usb/usbquirks.h b/sound/usb/usbquirks.h index 82a8d14..b90d98b 100644 --- a/sound/usb/usbquirks.h +++ b/sound/usb/usbquirks.h @@ -62,6 +62,13 @@ .idProduct = 0x3f04, .bInterfaceClass = USB_CLASS_AUDIO, }, +{ + /* E-Mu Tracker Pre */ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = 0x041e, + .idProduct = 0x3f0a, + .bInterfaceClass = USB_CLASS_AUDIO, +}, /* * Logitech QuickCam: bDeviceClass is vendor-specific, so generic interface

2 1

[alsa-devel] [PATCH] alsa-plugins: Start PA event loop after we have created the context.
by Lennart Poettering 26 Sep '08

26 Sep '08

Heya! We shouldn't be passing the main loop object to the pa_context while that loop is running and not locked. Push the main loop startup after we created the main loop. --- pulse/pulse.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) diff --git a/pulse/pulse.c b/pulse/pulse.c index 617851e..022ca55 100644 --- a/pulse/pulse.c +++ b/pulse/pulse.c @@ -188,9 +188,6 @@ snd_pulse_t *pulse_new(void) if (!p->mainloop) goto fail; - if (pa_threaded_mainloop_start(p->mainloop) < 0) - goto fail; - if (pa_get_binary_name(proc, sizeof(proc))) snprintf(buf, sizeof(buf), "ALSA plug-in [%s]", pa_path_get_filename(proc)); @@ -204,6 +201,9 @@ snd_pulse_t *pulse_new(void) pa_context_set_state_callback(p->context, context_state_cb, p); + if (pa_threaded_mainloop_start(p->mainloop) < 0) + goto fail; + return p; fail: -- 1.6.0.1 Lennart -- Lennart Poettering Red Hat, Inc. lennart [at] poettering [dot] net ICQ# 11060553 http://0pointer.net/lennart/ GnuPG 0x1A015CC4

2 1

[alsa-devel] Guide to Linux Sound APIs
by Lennart Poettering 26 Sep '08

26 Sep '08

Heya! At the audio microconf at the Linux plumbers conference one thing became very clear: it is very difficult for programmers to figure out which audio API to use for which purpose and which API not to use when doing audio programming on Linux. Someone needed to sit down and write up a small guide. And that's what I just finished doing. I'd thus like to draw your attention to this new (long) blog story of mine containing this guide: http://0pointer.de/blog/projects/guide-to-sound-apis I'd be very thankful for comments, especially from you Takashi and Jaroslav since it contains quite some details about the "safe" subset of the ALSA API! I'm thankful for all kinds of input! Lennart -- Lennart Poettering Red Hat, Inc. lennart [at] poettering [dot] net ICQ# 11060553 http://0pointer.net/lennart/ GnuPG 0x1A015CC4

4 6

[PATCH] Missing file for NVIDIA HDMI HD-audio support.
by Pawel Krzesniak 26 Sep '08

26 Sep '08

Missing file for NVIDIA HDMI HD-audio support. Signed-off-by: Pawel Krzesniak <pawel.krzesniak(a)gmail.com> --- pci/hda/patch_nvhdmi.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) create mode 100644 pci/hda/patch_nvhdmi.c diff --git a/pci/hda/patch_nvhdmi.c b/pci/hda/patch_nvhdmi.c new file mode 100644 index 0000000..3e700fd --- /dev/null +++ b/pci/hda/patch_nvhdmi.c @@ -0,0 +1,3 @@ +#define __NO_VERSION__ +#include "adriver.h" +#include "../../alsa-kernel/pci/hda/patch_nvhdmi.c" -- 1.5.4.3 --------------020304060503040802040300--

1 0

[alsa-devel] ALSA:ATMEL: common arch for audio via ssc(patch 1/3: removing directories)
by Sedji Gaouaou 26 Sep '08

26 Sep '08

Hi, I am trying to merge two directories: sound/soc/at32 and sound/soc/at91, to have a single atmel interface. I have written a patch but I can't test it on avr32 boards, nor eti board, so if any body can test it, it would be appreciated. I have changed the file eti_b1_wm8731.c, because the ssc was allocated in it and it should be allocated in the board file. So there are some changes to do in the eti board file otherwise the dai will not work for the eti board. I didn't change the i2c initialization since I don't know what is the status of the patch(I tried this one: http://git.kernel.org/?p=linux/kernel/git/tiwai/sound-2.6.git;a=commitdiff;… but I not sure it is complete?? Regards, Sedji diff --git a/sound/soc/at32/Kconfig b/sound/soc/at32/Kconfig deleted file mode 100644 index b0765e8..0000000 --- a/sound/soc/at32/Kconfig +++ /dev/null @@ -1,34 +0,0 @@ -config SND_AT32_SOC - tristate "SoC Audio for the Atmel AT32 System-on-a-Chip" - depends on AVR32 && SND_SOC - help - Say Y or M if you want to add support for codecs attached to - the AT32 SSC interface. You will also need to - to select the audio interfaces to support below. - - -config SND_AT32_SOC_SSC - tristate - - - -config SND_AT32_SOC_PLAYPAQ - tristate "SoC Audio support for PlayPaq with WM8510" - depends on SND_AT32_SOC && BOARD_PLAYPAQ - select SND_AT32_SOC_SSC - select SND_SOC_WM8510 - help - Say Y or M here if you want to add support for SoC audio - on the LRS PlayPaq. - - - -config SND_AT32_SOC_PLAYPAQ_SLAVE - bool "Run CODEC on PlayPaq in slave mode" - depends on SND_AT32_SOC_PLAYPAQ - default n - help - Say Y if you want to run with the AT32 SSC generating the BCLK - and FRAME signals on the PlayPaq. Unless you want to play - with the AT32 as the SSC master, you probably want to say N here, - as this will give you better sound quality. diff --git a/sound/soc/at32/Makefile b/sound/soc/at32/Makefile deleted file mode 100644 index c03e55e..0000000 --- a/sound/soc/at32/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# AT32 Platform Support -snd-soc-at32-objs := at32-pcm.o -snd-soc-at32-ssc-objs := at32-ssc.o - -obj-$(CONFIG_SND_AT32_SOC) += snd-soc-at32.o -obj-$(CONFIG_SND_AT32_SOC_SSC) += snd-soc-at32-ssc.o - -# AT32 Machine Support -snd-soc-playpaq-objs := playpaq_wm8510.o - -obj-$(CONFIG_SND_AT32_SOC_PLAYPAQ) += snd-soc-playpaq.o diff --git a/sound/soc/at32/at32-pcm.c b/sound/soc/at32/at32-pcm.c deleted file mode 100644 index 435f1da..0000000 --- a/sound/soc/at32/at32-pcm.c +++ /dev/null @@ -1,491 +0,0 @@ -/* sound/soc/at32/at32-pcm.c - * ASoC PCM interface for Atmel AT32 SoC - * - * Copyright (C) 2008 Long Range Systems - * Geoffrey Wossum <gwossum(a)acm.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Note that this is basically a port of the sound/soc/at91-pcm.c to - * the AVR32 kernel. Thanks to Frank Mandarino for that code. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/dma-mapping.h> -#include <linux/atmel_pdc.h> - -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/pcm_params.h> -#include <sound/soc.h> - -#include "at32-pcm.h" - - - -/*--------------------------------------------------------------------------*\ - * Hardware definition -\*--------------------------------------------------------------------------*/ -/* TODO: These values were taken from the AT91 platform driver, check - * them against real values for AT32 - */ -static const struct snd_pcm_hardware at32_pcm_hardware = { - .info = (SNDRV_PCM_INFO_MMAP | - SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_INTERLEAVED | - SNDRV_PCM_INFO_BLOCK_TRANSFER | - SNDRV_PCM_INFO_PAUSE), - - .formats = SNDRV_PCM_FMTBIT_S16, - .period_bytes_min = 32, - .period_bytes_max = 8192, /* 512 frames * 16 bytes / frame */ - .periods_min = 2, - .periods_max = 1024, - .buffer_bytes_max = 32 * 1024, -}; - - - -/*--------------------------------------------------------------------------*\ - * Data types -\*--------------------------------------------------------------------------*/ -struct at32_runtime_data { - struct at32_pcm_dma_params *params; - dma_addr_t dma_buffer; /* physical address of DMA buffer */ - dma_addr_t dma_buffer_end; /* first address beyond DMA buffer */ - size_t period_size; - - dma_addr_t period_ptr; /* physical address of next period */ - int periods; /* period index of period_ptr */ - - /* Save PDC registers (for power management) */ - u32 pdc_xpr_save; - u32 pdc_xcr_save; - u32 pdc_xnpr_save; - u32 pdc_xncr_save; -}; - - - -/*--------------------------------------------------------------------------*\ - * Helper functions -\*--------------------------------------------------------------------------*/ -static int at32_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream) -{ - struct snd_pcm_substream *substream = pcm->streams[stream].substream; - struct snd_dma_buffer *dmabuf = &substream->dma_buffer; - size_t size = at32_pcm_hardware.buffer_bytes_max; - - dmabuf->dev.type = SNDRV_DMA_TYPE_DEV; - dmabuf->dev.dev = pcm->card->dev; - dmabuf->private_data = NULL; - dmabuf->area = dma_alloc_coherent(pcm->card->dev, size, - &dmabuf->addr, GFP_KERNEL); - pr_debug("at32_pcm: preallocate_dma_buffer: " - "area=%p, addr=%p, size=%ld\n", - (void *)dmabuf->area, (void *)dmabuf->addr, size); - - if (!dmabuf->area) - return -ENOMEM; - - dmabuf->bytes = size; - return 0; -} - - - -/*--------------------------------------------------------------------------*\ - * ISR -\*--------------------------------------------------------------------------*/ -static void at32_pcm_dma_irq(u32 ssc_sr, struct snd_pcm_substream *substream) -{ - struct snd_pcm_runtime *rtd = substream->runtime; - struct at32_runtime_data *prtd = rtd->private_data; - struct at32_pcm_dma_params *params = prtd->params; - static int count; - - count++; - if (ssc_sr & params->mask->ssc_endbuf) { - pr_warning("at32-pcm: buffer %s on %s (SSC_SR=%#x, count=%d)\n", - substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? - "underrun" : "overrun", params->name, ssc_sr, count); - - /* re-start the PDC */ - ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, - params->mask->pdc_disable); - prtd->period_ptr += prtd->period_size; - if (prtd->period_ptr >= prtd->dma_buffer_end) - prtd->period_ptr = prtd->dma_buffer; - - - ssc_writex(params->ssc->regs, params->pdc->xpr, - prtd->period_ptr); - ssc_writex(params->ssc->regs, params->pdc->xcr, - prtd->period_size / params->pdc_xfer_size); - ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, - params->mask->pdc_enable); - } - - - if (ssc_sr & params->mask->ssc_endx) { - /* Load the PDC next pointer and counter registers */ - prtd->period_ptr += prtd->period_size; - if (prtd->period_ptr >= prtd->dma_buffer_end) - prtd->period_ptr = prtd->dma_buffer; - ssc_writex(params->ssc->regs, params->pdc->xnpr, - prtd->period_ptr); - ssc_writex(params->ssc->regs, params->pdc->xncr, - prtd->period_size / params->pdc_xfer_size); - } - - - snd_pcm_period_elapsed(substream); -} - - - -/*--------------------------------------------------------------------------*\ - * PCM operations -\*--------------------------------------------------------------------------*/ -static int at32_pcm_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_pcm_runtime *runtime = substream->runtime; - struct at32_runtime_data *prtd = runtime->private_data; - struct snd_soc_pcm_runtime *rtd = substream->private_data; - - /* this may get called several times by oss emulation - * with different params - */ - snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); - runtime->dma_bytes = params_buffer_bytes(params); - - prtd->params = rtd->dai->cpu_dai->dma_data; - prtd->params->dma_intr_handler = at32_pcm_dma_irq; - - prtd->dma_buffer = runtime->dma_addr; - prtd->dma_buffer_end = runtime->dma_addr + runtime->dma_bytes; - prtd->period_size = params_period_bytes(params); - - pr_debug("hw_params: DMA for %s initialized " - "(dma_bytes=%ld, period_size=%ld)\n", - prtd->params->name, runtime->dma_bytes, prtd->period_size); - - return 0; -} - - - -static int at32_pcm_hw_free(struct snd_pcm_substream *substream) -{ - struct at32_runtime_data *prtd = substream->runtime->private_data; - struct at32_pcm_dma_params *params = prtd->params; - - if (params != NULL) { - ssc_writex(params->ssc->regs, SSC_PDC_PTCR, - params->mask->pdc_disable); - prtd->params->dma_intr_handler = NULL; - } - - return 0; -} - - - -static int at32_pcm_prepare(struct snd_pcm_substream *substream) -{ - struct at32_runtime_data *prtd = substream->runtime->private_data; - struct at32_pcm_dma_params *params = prtd->params; - - ssc_writex(params->ssc->regs, SSC_IDR, - params->mask->ssc_endx | params->mask->ssc_endbuf); - ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, - params->mask->pdc_disable); - - return 0; -} - - -static int at32_pcm_trigger(struct snd_pcm_substream *substream, int cmd) -{ - struct snd_pcm_runtime *rtd = substream->runtime; - struct at32_runtime_data *prtd = rtd->private_data; - struct at32_pcm_dma_params *params = prtd->params; - int ret = 0; - - pr_debug("at32_pcm_trigger: buffer_size = %ld, " - "dma_area = %p, dma_bytes = %ld\n", - rtd->buffer_size, rtd->dma_area, rtd->dma_bytes); - - switch (cmd) { - case SNDRV_PCM_TRIGGER_START: - prtd->period_ptr = prtd->dma_buffer; - - ssc_writex(params->ssc->regs, params->pdc->xpr, - prtd->period_ptr); - ssc_writex(params->ssc->regs, params->pdc->xcr, - prtd->period_size / params->pdc_xfer_size); - - prtd->period_ptr += prtd->period_size; - ssc_writex(params->ssc->regs, params->pdc->xnpr, - prtd->period_ptr); - ssc_writex(params->ssc->regs, params->pdc->xncr, - prtd->period_size / params->pdc_xfer_size); - - pr_debug("trigger: period_ptr=%lx, xpr=%x, " - "xcr=%d, xnpr=%x, xncr=%d\n", - (unsigned long)prtd->period_ptr, - ssc_readx(params->ssc->regs, params->pdc->xpr), - ssc_readx(params->ssc->regs, params->pdc->xcr), - ssc_readx(params->ssc->regs, params->pdc->xnpr), - ssc_readx(params->ssc->regs, params->pdc->xncr)); - - ssc_writex(params->ssc->regs, SSC_IER, - params->mask->ssc_endx | params->mask->ssc_endbuf); - ssc_writex(params->ssc->regs, SSC_PDC_PTCR, - params->mask->pdc_enable); - - pr_debug("sr=%x, imr=%x\n", - ssc_readx(params->ssc->regs, SSC_SR), - ssc_readx(params->ssc->regs, SSC_IER)); - break; /* SNDRV_PCM_TRIGGER_START */ - - - - case SNDRV_PCM_TRIGGER_STOP: - case SNDRV_PCM_TRIGGER_SUSPEND: - case SNDRV_PCM_TRIGGER_PAUSE_PUSH: - ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, - params->mask->pdc_disable); - break; - - - case SNDRV_PCM_TRIGGER_RESUME: - case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, - params->mask->pdc_enable); - break; - - default: - ret = -EINVAL; - } - - return ret; -} - - - -static snd_pcm_uframes_t at32_pcm_pointer(struct snd_pcm_substream *substream) -{ - struct snd_pcm_runtime *runtime = substream->runtime; - struct at32_runtime_data *prtd = runtime->private_data; - struct at32_pcm_dma_params *params = prtd->params; - dma_addr_t ptr; - snd_pcm_uframes_t x; - - ptr = (dma_addr_t) ssc_readx(params->ssc->regs, params->pdc->xpr); - x = bytes_to_frames(runtime, ptr - prtd->dma_buffer); - - if (x == runtime->buffer_size) - x = 0; - - return x; -} - - - -static int at32_pcm_open(struct snd_pcm_substream *substream) -{ - struct snd_pcm_runtime *runtime = substream->runtime; - struct at32_runtime_data *prtd; - int ret = 0; - - snd_soc_set_runtime_hwparams(substream, &at32_pcm_hardware); - - /* ensure that buffer size is a multiple of period size */ - ret = snd_pcm_hw_constraint_integer(runtime, - SNDRV_PCM_HW_PARAM_PERIODS); - if (ret < 0) - goto out; - - prtd = kzalloc(sizeof(*prtd), GFP_KERNEL); - if (prtd == NULL) { - ret = -ENOMEM; - goto out; - } - runtime->private_data = prtd; - - -out: - return ret; -} - - - -static int at32_pcm_close(struct snd_pcm_substream *substream) -{ - struct at32_runtime_data *prtd = substream->runtime->private_data; - - kfree(prtd); - return 0; -} - - -static int at32_pcm_mmap(struct snd_pcm_substream *substream, - struct vm_area_struct *vma) -{ - return remap_pfn_range(vma, vma->vm_start, - substream->dma_buffer.addr >> PAGE_SHIFT, - vma->vm_end - vma->vm_start, vma->vm_page_prot); -} - - - -static struct snd_pcm_ops at32_pcm_ops = { - .open = at32_pcm_open, - .close = at32_pcm_close, - .ioctl = snd_pcm_lib_ioctl, - .hw_params = at32_pcm_hw_params, - .hw_free = at32_pcm_hw_free, - .prepare = at32_pcm_prepare, - .trigger = at32_pcm_trigger, - .pointer = at32_pcm_pointer, - .mmap = at32_pcm_mmap, -}; - - - -/*--------------------------------------------------------------------------*\ - * ASoC platform driver -\*--------------------------------------------------------------------------*/ -static u64 at32_pcm_dmamask = 0xffffffff; - -static int at32_pcm_new(struct snd_card *card, - struct snd_soc_dai *dai, - struct snd_pcm *pcm) -{ - int ret = 0; - - if (!card->dev->dma_mask) - card->dev->dma_mask = &at32_pcm_dmamask; - if (!card->dev->coherent_dma_mask) - card->dev->coherent_dma_mask = 0xffffffff; - - if (dai->playback.channels_min) { - ret = at32_pcm_preallocate_dma_buffer( - pcm, SNDRV_PCM_STREAM_PLAYBACK); - if (ret) - goto out; - } - - if (dai->capture.channels_min) { - pr_debug("at32-pcm: Allocating PCM capture DMA buffer\n"); - ret = at32_pcm_preallocate_dma_buffer( - pcm, SNDRV_PCM_STREAM_CAPTURE); - if (ret) - goto out; - } - - -out: - return ret; -} - - - -static void at32_pcm_free_dma_buffers(struct snd_pcm *pcm) -{ - struct snd_pcm_substream *substream; - struct snd_dma_buffer *buf; - int stream; - - for (stream = 0; stream < 2; stream++) { - substream = pcm->streams[stream].substream; - if (substream == NULL) - continue; - - buf = &substream->dma_buffer; - if (!buf->area) - continue; - dma_free_coherent(pcm->card->dev, buf->bytes, - buf->area, buf->addr); - buf->area = NULL; - } -} - - - -#ifdef CONFIG_PM -static int at32_pcm_suspend(struct platform_device *pdev, - struct snd_soc_dai *dai) -{ - struct snd_pcm_runtime *runtime = dai->runtime; - struct at32_runtime_data *prtd; - struct at32_pcm_dma_params *params; - - if (runtime == NULL) - return 0; - prtd = runtime->private_data; - params = prtd->params; - - /* Disable the PDC and save the PDC registers */ - ssc_writex(params->ssc->regs, PDC_PTCR, params->mask->pdc_disable); - - prtd->pdc_xpr_save = ssc_readx(params->ssc->regs, params->pdc->xpr); - prtd->pdc_xcr_save = ssc_readx(params->ssc->regs, params->pdc->xcr); - prtd->pdc_xnpr_save = ssc_readx(params->ssc->regs, params->pdc->xnpr); - prtd->pdc_xncr_save = ssc_readx(params->ssc->regs, params->pdc->xncr); - - return 0; -} - - - -static int at32_pcm_resume(struct platform_device *pdev, - struct snd_soc_dai *dai) -{ - struct snd_pcm_runtime *runtime = dai->runtime; - struct at32_runtime_data *prtd; - struct at32_pcm_dma_params *params; - - if (runtime == NULL) - return 0; - prtd = runtime->private_data; - params = prtd->params; - - /* Restore the PDC registers and enable the PDC */ - ssc_writex(params->ssc->regs, params->pdc->xpr, prtd->pdc_xpr_save); - ssc_writex(params->ssc->regs, params->pdc->xcr, prtd->pdc_xcr_save); - ssc_writex(params->ssc->regs, params->pdc->xnpr, prtd->pdc_xnpr_save); - ssc_writex(params->ssc->regs, params->pdc->xncr, prtd->pdc_xncr_save); - - ssc_writex(params->ssc->regs, PDC_PTCR, params->mask->pdc_enable); - return 0; -} -#else /* CONFIG_PM */ -# define at32_pcm_suspend NULL -# define at32_pcm_resume NULL -#endif /* CONFIG_PM */ - - - -struct snd_soc_platform at32_soc_platform = { - .name = "at32-audio", - .pcm_ops = &at32_pcm_ops, - .pcm_new = at32_pcm_new, - .pcm_free = at32_pcm_free_dma_buffers, - .suspend = at32_pcm_suspend, - .resume = at32_pcm_resume, -}; -EXPORT_SYMBOL_GPL(at32_soc_platform); - - - -MODULE_AUTHOR("Geoffrey Wossum <gwossum(a)acm.org>"); -MODULE_DESCRIPTION("Atmel AT32 PCM module"); -MODULE_LICENSE("GPL"); diff --git a/sound/soc/at32/at32-pcm.h b/sound/soc/at32/at32-pcm.h deleted file mode 100644 index 2a52430..0000000 --- a/sound/soc/at32/at32-pcm.h +++ /dev/null @@ -1,79 +0,0 @@ -/* sound/soc/at32/at32-pcm.h - * ASoC PCM interface for Atmel AT32 SoC - * - * Copyright (C) 2008 Long Range Systems - * Geoffrey Wossum <gwossum(a)acm.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __SOUND_SOC_AT32_AT32_PCM_H -#define __SOUND_SOC_AT32_AT32_PCM_H __FILE__ - -#include <linux/atmel-ssc.h> - - -/* - * Registers and status bits that are required by the PCM driver - * TODO: Is ptcr really used? - */ -struct at32_pdc_regs { - u32 xpr; /* PDC RX/TX pointer */ - u32 xcr; /* PDC RX/TX counter */ - u32 xnpr; /* PDC next RX/TX pointer */ - u32 xncr; /* PDC next RX/TX counter */ - u32 ptcr; /* PDC transfer control */ -}; - - - -/* - * SSC mask info - */ -struct at32_ssc_mask { - u32 ssc_enable; /* SSC RX/TX enable */ - u32 ssc_disable; /* SSC RX/TX disable */ - u32 ssc_endx; /* SSC ENDTX or ENDRX */ - u32 ssc_endbuf; /* SSC TXBUFF or RXBUFF */ - u32 pdc_enable; /* PDC RX/TX enable */ - u32 pdc_disable; /* PDC RX/TX disable */ -}; - - - -/* - * This structure, shared between the PCM driver and the interface, - * contains all information required by the PCM driver to perform the - * PDC DMA operation. All fields except dma_intr_handler() are initialized - * by the interface. The dms_intr_handler() pointer is set by the PCM - * driver and called by the interface SSC interrupt handler if it is - * non-NULL. - */ -struct at32_pcm_dma_params { - char *name; /* stream identifier */ - int pdc_xfer_size; /* PDC counter increment in bytes */ - struct ssc_device *ssc; /* SSC device for stream */ - struct at32_pdc_regs *pdc; /* PDC register info */ - struct at32_ssc_mask *mask; /* SSC mask info */ - struct snd_pcm_substream *substream; - void (*dma_intr_handler) (u32, struct snd_pcm_substream *); -}; - - - -/* - * The AT32 ASoC platform driver - */ -extern struct snd_soc_platform at32_soc_platform; - - - -/* - * SSC register access (since ssc_writel() / ssc_readl() require literal name) - */ -#define ssc_readx(base, reg) (__raw_readl((base) + (reg))) -#define ssc_writex(base, reg, value) __raw_writel((value), (base) + (reg)) - -#endif /* __SOUND_SOC_AT32_AT32_PCM_H */ diff --git a/sound/soc/at32/at32-ssc.c b/sound/soc/at32/at32-ssc.c deleted file mode 100644 index 4ef6492..0000000 --- a/sound/soc/at32/at32-ssc.c +++ /dev/null @@ -1,849 +0,0 @@ -/* sound/soc/at32/at32-ssc.c - * ASoC platform driver for AT32 using SSC as DAI - * - * Copyright (C) 2008 Long Range Systems - * Geoffrey Wossum <gwossum(a)acm.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Note that this is basically a port of the sound/soc/at91-ssc.c to - * the AVR32 kernel. Thanks to Frank Mandarino for that code. - */ - -/* #define DEBUG */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/device.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/atmel_pdc.h> -#include <linux/atmel-ssc.h> - -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/pcm_params.h> -#include <sound/initval.h> -#include <sound/soc.h> - -#include "at32-pcm.h" -#include "at32-ssc.h" - - - -/*-------------------------------------------------------------------------*\ - * Constants -\*-------------------------------------------------------------------------*/ -#define NUM_SSC_DEVICES 3 - -/* - * SSC direction masks - */ -#define SSC_DIR_MASK_UNUSED 0 -#define SSC_DIR_MASK_PLAYBACK 1 -#define SSC_DIR_MASK_CAPTURE 2 - -/* - * SSC register values that Atmel left out of <linux/atmel-ssc.h>. These - * are expected to be used with SSC_BF - */ -/* START bit field values */ -#define SSC_START_CONTINUOUS 0 -#define SSC_START_TX_RX 1 -#define SSC_START_LOW_RF 2 -#define SSC_START_HIGH_RF 3 -#define SSC_START_FALLING_RF 4 -#define SSC_START_RISING_RF 5 -#define SSC_START_LEVEL_RF 6 -#define SSC_START_EDGE_RF 7 -#define SSS_START_COMPARE_0 8 - -/* CKI bit field values */ -#define SSC_CKI_FALLING 0 -#define SSC_CKI_RISING 1 - -/* CKO bit field values */ -#define SSC_CKO_NONE 0 -#define SSC_CKO_CONTINUOUS 1 -#define SSC_CKO_TRANSFER 2 - -/* CKS bit field values */ -#define SSC_CKS_DIV 0 -#define SSC_CKS_CLOCK 1 -#define SSC_CKS_PIN 2 - -/* FSEDGE bit field values */ -#define SSC_FSEDGE_POSITIVE 0 -#define SSC_FSEDGE_NEGATIVE 1 - -/* FSOS bit field values */ -#define SSC_FSOS_NONE 0 -#define SSC_FSOS_NEGATIVE 1 -#define SSC_FSOS_POSITIVE 2 -#define SSC_FSOS_LOW 3 -#define SSC_FSOS_HIGH 4 -#define SSC_FSOS_TOGGLE 5 - -#define START_DELAY 1 - - - -/*-------------------------------------------------------------------------*\ - * Module data -\*-------------------------------------------------------------------------*/ -/* - * SSC PDC registered required by the PCM DMA engine - */ -static struct at32_pdc_regs pdc_tx_reg = { - .xpr = SSC_PDC_TPR, - .xcr = SSC_PDC_TCR, - .xnpr = SSC_PDC_TNPR, - .xncr = SSC_PDC_TNCR, -}; - - - -static struct at32_pdc_regs pdc_rx_reg = { - .xpr = SSC_PDC_RPR, - .xcr = SSC_PDC_RCR, - .xnpr = SSC_PDC_RNPR, - .xncr = SSC_PDC_RNCR, -}; - - - -/* - * SSC and PDC status bits for transmit and receive - */ -static struct at32_ssc_mask ssc_tx_mask = { - .ssc_enable = SSC_BIT(CR_TXEN), - .ssc_disable = SSC_BIT(CR_TXDIS), - .ssc_endx = SSC_BIT(SR_ENDTX), - .ssc_endbuf = SSC_BIT(SR_TXBUFE), - .pdc_enable = SSC_BIT(PDC_PTCR_TXTEN), - .pdc_disable = SSC_BIT(PDC_PTCR_TXTDIS), -}; - - - -static struct at32_ssc_mask ssc_rx_mask = { - .ssc_enable = SSC_BIT(CR_RXEN), - .ssc_disable = SSC_BIT(CR_RXDIS), - .ssc_endx = SSC_BIT(SR_ENDRX), - .ssc_endbuf = SSC_BIT(SR_RXBUFF), - .pdc_enable = SSC_BIT(PDC_PTCR_RXTEN), - .pdc_disable = SSC_BIT(PDC_PTCR_RXTDIS), -}; - - - -/* - * DMA parameters for each SSC - */ -static struct at32_pcm_dma_params ssc_dma_params[NUM_SSC_DEVICES][2] = { - { - { - .name = "SSC0 PCM out", - .pdc = &pdc_tx_reg, - .mask = &ssc_tx_mask, - }, - { - .name = "SSC0 PCM in", - .pdc = &pdc_rx_reg, - .mask = &ssc_rx_mask, - }, - }, - { - { - .name = "SSC1 PCM out", - .pdc = &pdc_tx_reg, - .mask = &ssc_tx_mask, - }, - { - .name = "SSC1 PCM in", - .pdc = &pdc_rx_reg, - .mask = &ssc_rx_mask, - }, - }, - { - { - .name = "SSC2 PCM out", - .pdc = &pdc_tx_reg, - .mask = &ssc_tx_mask, - }, - { - .name = "SSC2 PCM in", - .pdc = &pdc_rx_reg, - .mask = &ssc_rx_mask, - }, - }, -}; - - - -static struct at32_ssc_info ssc_info[NUM_SSC_DEVICES] = { - { - .name = "ssc0", - .lock = __SPIN_LOCK_UNLOCKED(ssc_info[0].lock), - .dir_mask = SSC_DIR_MASK_UNUSED, - .initialized = 0, - }, - { - .name = "ssc1", - .lock = __SPIN_LOCK_UNLOCKED(ssc_info[1].lock), - .dir_mask = SSC_DIR_MASK_UNUSED, - .initialized = 0, - }, - { - .name = "ssc2", - .lock = __SPIN_LOCK_UNLOCKED(ssc_info[2].lock), - .dir_mask = SSC_DIR_MASK_UNUSED, - .initialized = 0, - }, -}; - - - - -/*-------------------------------------------------------------------------*\ - * ISR -\*-------------------------------------------------------------------------*/ -/* - * SSC interrupt handler. Passes PDC interrupts to the DMA interrupt - * handler in the PCM driver. - */ -static irqreturn_t at32_ssc_interrupt(int irq, void *dev_id) -{ - struct at32_ssc_info *ssc_p = dev_id; - struct at32_pcm_dma_params *dma_params; - u32 ssc_sr; - u32 ssc_substream_mask; - int i; - - ssc_sr = (ssc_readl(ssc_p->ssc->regs, SR) & - ssc_readl(ssc_p->ssc->regs, IMR)); - - /* - * Loop through substreams attached to this SSC. If a DMA-related - * interrupt occured on that substream, call the DMA interrupt - * handler function, if one has been registered in the dma_param - * structure by the PCM driver. - */ - for (i = 0; i < ARRAY_SIZE(ssc_p->dma_params); i++) { - dma_params = ssc_p->dma_params[i]; - - if ((dma_params != NULL) && - (dma_params->dma_intr_handler != NULL)) { - ssc_substream_mask = (dma_params->mask->ssc_endx | - dma_params->mask->ssc_endbuf); - if (ssc_sr & ssc_substream_mask) { - dma_params->dma_intr_handler(ssc_sr, - dma_params-> - substream); - } - } - } - - - return IRQ_HANDLED; -} - -/*-------------------------------------------------------------------------*\ - * DAI functions -\*-------------------------------------------------------------------------*/ -/* - * Startup. Only that one substream allowed in each direction. - */ -static int at32_ssc_startup(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct at32_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; - int dir_mask; - - dir_mask = ((substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? - SSC_DIR_MASK_PLAYBACK : SSC_DIR_MASK_CAPTURE); - - spin_lock_irq(&ssc_p->lock); - if (ssc_p->dir_mask & dir_mask) { - spin_unlock_irq(&ssc_p->lock); - return -EBUSY; - } - ssc_p->dir_mask |= dir_mask; - spin_unlock_irq(&ssc_p->lock); - - return 0; -} - - - -/* - * Shutdown. Clear DMA parameters and shutdown the SSC if there - * are no other substreams open. - */ -static void at32_ssc_shutdown(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct at32_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; - struct at32_pcm_dma_params *dma_params; - int dir_mask; - - dma_params = ssc_p->dma_params[substream->stream]; - - if (dma_params != NULL) { - ssc_writel(dma_params->ssc->regs, CR, - dma_params->mask->ssc_disable); - pr_debug("%s disabled SSC_SR=0x%08x\n", - (substream->stream ? "receiver" : "transmit"), - ssc_readl(ssc_p->ssc->regs, SR)); - - dma_params->ssc = NULL; - dma_params->substream = NULL; - ssc_p->dma_params[substream->stream] = NULL; - } - - - dir_mask = 1 << substream->stream; - spin_lock_irq(&ssc_p->lock); - ssc_p->dir_mask &= ~dir_mask; - if (!ssc_p->dir_mask) { - /* Shutdown the SSC clock */ - pr_debug("at32-ssc: Stopping user %d clock\n", - ssc_p->ssc->user); - clk_disable(ssc_p->ssc->clk); - - if (ssc_p->initialized) { - free_irq(ssc_p->ssc->irq, ssc_p); - ssc_p->initialized = 0; - } - - /* Reset the SSC */ - ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST)); - - /* clear the SSC dividers */ - ssc_p->cmr_div = 0; - ssc_p->tcmr_period = 0; - ssc_p->rcmr_period = 0; - } - spin_unlock_irq(&ssc_p->lock); -} - - - -/* - * Set the SSC system clock rate - */ -static int at32_ssc_set_dai_sysclk(struct snd_soc_dai *cpu_dai, - int clk_id, unsigned int freq, int dir) -{ - /* TODO: What the heck do I do here? */ - return 0; -} - - - -/* - * Record DAI format for use by hw_params() - */ -static int at32_ssc_set_dai_fmt(struct snd_soc_dai *cpu_dai, - unsigned int fmt) -{ - struct at32_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; - - ssc_p->daifmt = fmt; - return 0; -} - - - -/* - * Record SSC clock dividers for use in hw_params() - */ -static int at32_ssc_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, - int div_id, int div) -{ - struct at32_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; - - switch (div_id) { - case AT32_SSC_CMR_DIV: - /* - * The same master clock divider is used for both - * transmit and receive, so if a value has already - * been set, it must match this value - */ - if (ssc_p->cmr_div == 0) - ssc_p->cmr_div = div; - else if (div != ssc_p->cmr_div) - return -EBUSY; - break; - - case AT32_SSC_TCMR_PERIOD: - ssc_p->tcmr_period = div; - break; - - case AT32_SSC_RCMR_PERIOD: - ssc_p->rcmr_period = div; - break; - - default: - return -EINVAL; - } - - return 0; -} - - - -/* - * Configure the SSC - */ -static int at32_ssc_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - int id = rtd->dai->cpu_dai->id; - struct at32_ssc_info *ssc_p = &ssc_info[id]; - struct at32_pcm_dma_params *dma_params; - int channels, bits; - u32 tfmr, rfmr, tcmr, rcmr; - int start_event; - int ret; - - - /* - * Currently, there is only one set of dma_params for each direction. - * If more are added, this code will have to be changed to select - * the proper set - */ - dma_params = &ssc_dma_params[id][substream->stream]; - dma_params->ssc = ssc_p->ssc; - dma_params->substream = substream; - - ssc_p->dma_params[substream->stream] = dma_params; - - - /* - * The cpu_dai->dma_data field is only used to communicate the - * appropriate DMA parameters to the PCM driver's hw_params() - * function. It should not be used for other purposes as it - * is common to all substreams. - */ - rtd->dai->cpu_dai->dma_data = dma_params; - - channels = params_channels(params); - - - /* - * Determine sample size in bits and the PDC increment - */ - switch (params_format(params)) { - case SNDRV_PCM_FORMAT_S8: - bits = 8; - dma_params->pdc_xfer_size = 1; - break; - - case SNDRV_PCM_FORMAT_S16: - bits = 16; - dma_params->pdc_xfer_size = 2; - break; - - case SNDRV_PCM_FORMAT_S24: - bits = 24; - dma_params->pdc_xfer_size = 4; - break; - - case SNDRV_PCM_FORMAT_S32: - bits = 32; - dma_params->pdc_xfer_size = 4; - break; - - default: - pr_warning("at32-ssc: Unsupported PCM format %d", - params_format(params)); - return -EINVAL; - } - pr_debug("at32-ssc: bits = %d, pdc_xfer_size = %d, channels = %d\n", - bits, dma_params->pdc_xfer_size, channels); - - - /* - * The SSC only supports up to 16-bit samples in I2S format, due - * to the size of the Frame Mode Register FSLEN field. - */ - if ((ssc_p->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_I2S) - if (bits > 16) { - pr_warning("at32-ssc: " - "sample size %d is too large for I2S\n", - bits); - return -EINVAL; - } - - - /* - * Compute the SSC register settings - */ - switch (ssc_p->daifmt & (SND_SOC_DAIFMT_FORMAT_MASK | - SND_SOC_DAIFMT_MASTER_MASK)) { - case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS: - /* - * I2S format, SSC provides BCLK and LRS clocks. - * - * The SSC transmit and receive clocks are generated from the - * MCK divider, and the BCLK signal is output on the SSC TK line - */ - pr_debug("at32-ssc: SSC mode is I2S BCLK / FRAME master\n"); - rcmr = (SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) | - SSC_BF(RCMR_STTDLY, START_DELAY) | - SSC_BF(RCMR_START, SSC_START_FALLING_RF) | - SSC_BF(RCMR_CKI, SSC_CKI_RISING) | - SSC_BF(RCMR_CKO, SSC_CKO_NONE) | - SSC_BF(RCMR_CKS, SSC_CKS_DIV)); - - rfmr = (SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | - SSC_BF(RFMR_FSOS, SSC_FSOS_NEGATIVE) | - SSC_BF(RFMR_FSLEN, bits - 1) | - SSC_BF(RFMR_DATNB, channels - 1) | - SSC_BIT(RFMR_MSBF) | SSC_BF(RFMR_DATLEN, bits - 1)); - - tcmr = (SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) | - SSC_BF(TCMR_STTDLY, START_DELAY) | - SSC_BF(TCMR_START, SSC_START_FALLING_RF) | - SSC_BF(TCMR_CKI, SSC_CKI_FALLING) | - SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) | - SSC_BF(TCMR_CKS, SSC_CKS_DIV)); - - tfmr = (SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | - SSC_BF(TFMR_FSOS, SSC_FSOS_NEGATIVE) | - SSC_BF(TFMR_FSLEN, bits - 1) | - SSC_BF(TFMR_DATNB, channels - 1) | SSC_BIT(TFMR_MSBF) | - SSC_BF(TFMR_DATLEN, bits - 1)); - break; - - - case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM: - /* - * I2S format, CODEC supplies BCLK and LRC clock. - * - * The SSC transmit clock is obtained from the BCLK signal - * on the TK line, and the SSC receive clock is generated from - * the transmit clock. - * - * For single channel data, one sample is transferred on the - * falling edge of the LRC clock. For two channel data, one - * sample is transferred on both edges of the LRC clock. - */ - pr_debug("at32-ssc: SSC mode is I2S BCLK / FRAME slave\n"); - start_event = ((channels == 1) ? - SSC_START_FALLING_RF : SSC_START_EDGE_RF); - - rcmr = (SSC_BF(RCMR_STTDLY, START_DELAY) | - SSC_BF(RCMR_START, start_event) | - SSC_BF(RCMR_CKI, SSC_CKI_RISING) | - SSC_BF(RCMR_CKO, SSC_CKO_NONE) | - SSC_BF(RCMR_CKS, SSC_CKS_CLOCK)); - - rfmr = (SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | - SSC_BF(RFMR_FSOS, SSC_FSOS_NONE) | - SSC_BIT(RFMR_MSBF) | SSC_BF(RFMR_DATLEN, bits - 1)); - - tcmr = (SSC_BF(TCMR_STTDLY, START_DELAY) | - SSC_BF(TCMR_START, start_event) | - SSC_BF(TCMR_CKI, SSC_CKI_FALLING) | - SSC_BF(TCMR_CKO, SSC_CKO_NONE) | - SSC_BF(TCMR_CKS, SSC_CKS_PIN)); - - tfmr = (SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | - SSC_BF(TFMR_FSOS, SSC_FSOS_NONE) | - SSC_BIT(TFMR_MSBF) | SSC_BF(TFMR_DATLEN, bits - 1)); - break; - - - case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS: - /* - * DSP/PCM Mode A format, SSC provides BCLK and LRC clocks. - * - * The SSC transmit and receive clocks are generated from the - * MCK divider, and the BCLK signal is output on the SSC TK line - */ - pr_debug("at32-ssc: SSC mode is DSP A BCLK / FRAME master\n"); - rcmr = (SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) | - SSC_BF(RCMR_STTDLY, 1) | - SSC_BF(RCMR_START, SSC_START_RISING_RF) | - SSC_BF(RCMR_CKI, SSC_CKI_RISING) | - SSC_BF(RCMR_CKO, SSC_CKO_NONE) | - SSC_BF(RCMR_CKS, SSC_CKS_DIV)); - - rfmr = (SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | - SSC_BF(RFMR_FSOS, SSC_FSOS_POSITIVE) | - SSC_BF(RFMR_DATNB, channels - 1) | - SSC_BIT(RFMR_MSBF) | SSC_BF(RFMR_DATLEN, bits - 1)); - - tcmr = (SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) | - SSC_BF(TCMR_STTDLY, 1) | - SSC_BF(TCMR_START, SSC_START_RISING_RF) | - SSC_BF(TCMR_CKI, SSC_CKI_RISING) | - SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) | - SSC_BF(TCMR_CKS, SSC_CKS_DIV)); - - tfmr = (SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | - SSC_BF(TFMR_FSOS, SSC_FSOS_POSITIVE) | - SSC_BF(TFMR_DATNB, channels - 1) | - SSC_BIT(TFMR_MSBF) | SSC_BF(TFMR_DATLEN, bits - 1)); - break; - - - case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM: - default: - pr_warning("at32-ssc: unsupported DAI format 0x%x\n", - ssc_p->daifmt); - return -EINVAL; - break; - } - pr_debug("at32-ssc: RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n", - rcmr, rfmr, tcmr, tfmr); - - - if (!ssc_p->initialized) { - /* enable peripheral clock */ - pr_debug("at32-ssc: Starting clock\n"); - clk_enable(ssc_p->ssc->clk); - - /* Reset the SSC and its PDC registers */ - ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST)); - - ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0); - ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0); - ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0); - ssc_writel(ssc_p->ssc->regs, PDC_RNCR, 0); - - ssc_writel(ssc_p->ssc->regs, PDC_TPR, 0); - ssc_writel(ssc_p->ssc->regs, PDC_TCR, 0); - ssc_writel(ssc_p->ssc->regs, PDC_TNPR, 0); - ssc_writel(ssc_p->ssc->regs, PDC_TNCR, 0); - - ret = request_irq(ssc_p->ssc->irq, at32_ssc_interrupt, 0, - ssc_p->name, ssc_p); - if (ret < 0) { - pr_warning("at32-ssc: request irq failed (%d)\n", ret); - pr_debug("at32-ssc: Stopping clock\n"); - clk_disable(ssc_p->ssc->clk); - return ret; - } - - ssc_p->initialized = 1; - } - - /* Set SSC clock mode register */ - ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->cmr_div); - - /* set receive clock mode and format */ - ssc_writel(ssc_p->ssc->regs, RCMR, rcmr); - ssc_writel(ssc_p->ssc->regs, RFMR, rfmr); - - /* set transmit clock mode and format */ - ssc_writel(ssc_p->ssc->regs, TCMR, tcmr); - ssc_writel(ssc_p->ssc->regs, TFMR, tfmr); - - pr_debug("at32-ssc: SSC initialized\n"); - return 0; -} - - - -static int at32_ssc_prepare(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct at32_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; - struct at32_pcm_dma_params *dma_params; - - dma_params = ssc_p->dma_params[substream->stream]; - - ssc_writel(dma_params->ssc->regs, CR, dma_params->mask->ssc_enable); - - return 0; -} - - - -#ifdef CONFIG_PM -static int at32_ssc_suspend(struct platform_device *pdev, - struct snd_soc_dai *cpu_dai) -{ - struct at32_ssc_info *ssc_p; - - if (!cpu_dai->active) - return 0; - - ssc_p = &ssc_info[cpu_dai->id]; - - /* Save the status register before disabling transmit and receive */ - ssc_p->ssc_state.ssc_sr = ssc_readl(ssc_p->ssc->regs, SR); - ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_TXDIS) | SSC_BIT(CR_RXDIS)); - - /* Save the current interrupt mask, then disable unmasked interrupts */ - ssc_p->ssc_state.ssc_imr = ssc_readl(ssc_p->ssc->regs, IMR); - ssc_writel(ssc_p->ssc->regs, IDR, ssc_p->ssc_state.ssc_imr); - - ssc_p->ssc_state.ssc_cmr = ssc_readl(ssc_p->ssc->regs, CMR); - ssc_p->ssc_state.ssc_rcmr = ssc_readl(ssc_p->ssc->regs, RCMR); - ssc_p->ssc_state.ssc_rfmr = ssc_readl(ssc_p->ssc->regs, RFMR); - ssc_p->ssc_state.ssc_tcmr = ssc_readl(ssc_p->ssc->regs, TCMR); - ssc_p->ssc_state.ssc_tfmr = ssc_readl(ssc_p->ssc->regs, TFMR); - - return 0; -} - - - -static int at32_ssc_resume(struct platform_device *pdev, - struct snd_soc_dai *cpu_dai) -{ - struct at32_ssc_info *ssc_p; - u32 cr; - - if (!cpu_dai->active) - return 0; - - ssc_p = &ssc_info[cpu_dai->id]; - - /* restore SSC register settings */ - ssc_writel(ssc_p->ssc->regs, TFMR, ssc_p->ssc_state.ssc_tfmr); - ssc_writel(ssc_p->ssc->regs, TCMR, ssc_p->ssc_state.ssc_tcmr); - ssc_writel(ssc_p->ssc->regs, RFMR, ssc_p->ssc_state.ssc_rfmr); - ssc_writel(ssc_p->ssc->regs, RCMR, ssc_p->ssc_state.ssc_rcmr); - ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->ssc_state.ssc_cmr); - - /* re-enable interrupts */ - ssc_writel(ssc_p->ssc->regs, IER, ssc_p->ssc_state.ssc_imr); - - /* Re-enable recieve and transmit as appropriate */ - cr = 0; - cr |= - (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_RXEN)) ? SSC_BIT(CR_RXEN) : 0; - cr |= - (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_TXEN)) ? SSC_BIT(CR_TXEN) : 0; - ssc_writel(ssc_p->ssc->regs, CR, cr); - - return 0; -} -#else /* CONFIG_PM */ -# define at32_ssc_suspend NULL -# define at32_ssc_resume NULL -#endif /* CONFIG_PM */ - - -#define AT32_SSC_RATES \ - (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \ - SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ - SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000) - - -#define AT32_SSC_FORMATS \ - (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16 | \ - SNDRV_PCM_FMTBIT_S24 | SNDRV_PCM_FMTBIT_S32) - - -struct snd_soc_dai at32_ssc_dai[NUM_SSC_DEVICES] = { - { - .name = "at32-ssc0", - .id = 0, - .type = SND_SOC_DAI_PCM, - .suspend = at32_ssc_suspend, - .resume = at32_ssc_resume, - .playback = { - .channels_min = 1, - .channels_max = 2, - .rates = AT32_SSC_RATES, - .formats = AT32_SSC_FORMATS, - }, - .capture = { - .channels_min = 1, - .channels_max = 2, - .rates = AT32_SSC_RATES, - .formats = AT32_SSC_FORMATS, - }, - .ops = { - .startup = at32_ssc_startup, - .shutdown = at32_ssc_shutdown, - .prepare = at32_ssc_prepare, - .hw_params = at32_ssc_hw_params, - }, - .dai_ops = { - .set_sysclk = at32_ssc_set_dai_sysclk, - .set_fmt = at32_ssc_set_dai_fmt, - .set_clkdiv = at32_ssc_set_dai_clkdiv, - }, - .private_data = &ssc_info[0], - }, - { - .name = "at32-ssc1", - .id = 1, - .type = SND_SOC_DAI_PCM, - .suspend = at32_ssc_suspend, - .resume = at32_ssc_resume, - .playback = { - .channels_min = 1, - .channels_max = 2, - .rates = AT32_SSC_RATES, - .formats = AT32_SSC_FORMATS, - }, - .capture = { - .channels_min = 1, - .channels_max = 2, - .rates = AT32_SSC_RATES, - .formats = AT32_SSC_FORMATS, - }, - .ops = { - .startup = at32_ssc_startup, - .shutdown = at32_ssc_shutdown, - .prepare = at32_ssc_prepare, - .hw_params = at32_ssc_hw_params, - }, - .dai_ops = { - .set_sysclk = at32_ssc_set_dai_sysclk, - .set_fmt = at32_ssc_set_dai_fmt, - .set_clkdiv = at32_ssc_set_dai_clkdiv, - }, - .private_data = &ssc_info[1], - }, - { - .name = "at32-ssc2", - .id = 2, - .type = SND_SOC_DAI_PCM, - .suspend = at32_ssc_suspend, - .resume = at32_ssc_resume, - .playback = { - .channels_min = 1, - .channels_max = 2, - .rates = AT32_SSC_RATES, - .formats = AT32_SSC_FORMATS, - }, - .capture = { - .channels_min = 1, - .channels_max = 2, - .rates = AT32_SSC_RATES, - .formats = AT32_SSC_FORMATS, - }, - .ops = { - .startup = at32_ssc_startup, - .shutdown = at32_ssc_shutdown, - .prepare = at32_ssc_prepare, - .hw_params = at32_ssc_hw_params, - }, - .dai_ops = { - .set_sysclk = at32_ssc_set_dai_sysclk, - .set_fmt = at32_ssc_set_dai_fmt, - .set_clkdiv = at32_ssc_set_dai_clkdiv, - }, - .private_data = &ssc_info[2], - }, -}; -EXPORT_SYMBOL_GPL(at32_ssc_dai); - - -MODULE_AUTHOR("Geoffrey Wossum <gwossum(a)acm.org>"); -MODULE_DESCRIPTION("AT32 SSC ASoC Interface"); -MODULE_LICENSE("GPL"); diff --git a/sound/soc/at32/at32-ssc.h b/sound/soc/at32/at32-ssc.h deleted file mode 100644 index 3c052db..0000000 --- a/sound/soc/at32/at32-ssc.h +++ /dev/null @@ -1,59 +0,0 @@ -/* sound/soc/at32/at32-ssc.h - * ASoC SSC interface for Atmel AT32 SoC - * - * Copyright (C) 2008 Long Range Systems - * Geoffrey Wossum <gwossum(a)acm.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __SOUND_SOC_AT32_AT32_SSC_H -#define __SOUND_SOC_AT32_AT32_SSC_H __FILE__ - -#include <linux/types.h> -#include <linux/atmel-ssc.h> - -#include "at32-pcm.h" - - - -struct at32_ssc_state { - u32 ssc_cmr; - u32 ssc_rcmr; - u32 ssc_rfmr; - u32 ssc_tcmr; - u32 ssc_tfmr; - u32 ssc_sr; - u32 ssc_imr; -}; - - - -struct at32_ssc_info { - char *name; - struct ssc_device *ssc; - spinlock_t lock; /* lock for dir_mask */ - unsigned short dir_mask; /* 0=unused, 1=playback, 2=capture */ - unsigned short initialized; /* true if SSC has been initialized */ - unsigned short daifmt; - unsigned short cmr_div; - unsigned short tcmr_period; - unsigned short rcmr_period; - struct at32_pcm_dma_params *dma_params[2]; - struct at32_ssc_state ssc_state; -}; - - -/* SSC divider ids */ -#define AT32_SSC_CMR_DIV 0 /* MCK divider for BCLK */ -#define AT32_SSC_TCMR_PERIOD 1 /* BCLK divider for transmit FS */ -#define AT32_SSC_RCMR_PERIOD 2 /* BCLK divider for receive FS */ - - -extern struct snd_soc_dai at32_ssc_dai[]; - - - -#endif /* __SOUND_SOC_AT32_AT32_SSC_H */ diff --git a/sound/soc/at32/playpaq_wm8510.c b/sound/soc/at32/playpaq_wm8510.c deleted file mode 100644 index 3f32621..0000000 --- a/sound/soc/at32/playpaq_wm8510.c +++ /dev/null @@ -1,522 +0,0 @@ -/* sound/soc/at32/playpaq_wm8510.c - * ASoC machine driver for PlayPaq using WM8510 codec - * - * Copyright (C) 2008 Long Range Systems - * Geoffrey Wossum <gwossum(a)acm.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This code is largely inspired by sound/soc/at91/eti_b1_wm8731.c - * - * NOTE: If you don't have the AT32 enhanced portmux configured (which - * isn't currently in the mainline or Atmel patched kernel), you will - * need to set the MCLK pin (PA30) to peripheral A in your board initialization - * code. Something like: - * at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0); - * - */ - -/* #define DEBUG */ - -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/version.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/clk.h> -#include <linux/timer.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> - -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/pcm_params.h> -#include <sound/soc.h> -#include <sound/soc-dapm.h> - -#include <mach/at32ap700x.h> -#include <mach/portmux.h> - -#include "../codecs/wm8510.h" -#include "at32-pcm.h" -#include "at32-ssc.h" - - -/*-------------------------------------------------------------------------*\ - * constants -\*-------------------------------------------------------------------------*/ -#define MCLK_PIN GPIO_PIN_PA(30) -#define MCLK_PERIPH GPIO_PERIPH_A - - -/*-------------------------------------------------------------------------*\ - * data types -\*-------------------------------------------------------------------------*/ -/* SSC clocking data */ -struct ssc_clock_data { - /* CMR div */ - unsigned int cmr_div; - - /* Frame period (as needed by xCMR.PERIOD) */ - unsigned int period; - - /* The SSC clock rate these settings where calculated for */ - unsigned long ssc_rate; -}; - - -/*-------------------------------------------------------------------------*\ - * module data -\*-------------------------------------------------------------------------*/ -static struct clk *_gclk0; -static struct clk *_pll0; - -#define CODEC_CLK (_gclk0) - - -/*-------------------------------------------------------------------------*\ - * Sound SOC operations -\*-------------------------------------------------------------------------*/ -#if defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE -static struct ssc_clock_data playpaq_wm8510_calc_ssc_clock( - struct snd_pcm_hw_params *params, - struct snd_soc_dai *cpu_dai) -{ - struct at32_ssc_info *ssc_p = cpu_dai->private_data; - struct ssc_device *ssc = ssc_p->ssc; - struct ssc_clock_data cd; - unsigned int rate, width_bits, channels; - unsigned int bitrate, ssc_div; - unsigned actual_rate; - - - /* - * Figure out required bitrate - */ - rate = params_rate(params); - channels = params_channels(params); - width_bits = snd_pcm_format_physical_width(params_format(params)); - bitrate = rate * width_bits * channels; - - - /* - * Figure out required SSC divider and period for required bitrate - */ - cd.ssc_rate = clk_get_rate(ssc->clk); - ssc_div = cd.ssc_rate / bitrate; - cd.cmr_div = ssc_div / 2; - if (ssc_div & 1) { - /* round cmr_div up */ - cd.cmr_div++; - } - cd.period = width_bits - 1; - - - /* - * Find actual rate, compare to requested rate - */ - actual_rate = (cd.ssc_rate / (cd.cmr_div * 2)) / (2 * (cd.period + 1)); - pr_debug("playpaq_wm8510: Request rate = %d, actual rate = %d\n", - rate, actual_rate); - - - return cd; -} -#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */ - - - -static int playpaq_wm8510_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; - struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; - struct at32_ssc_info *ssc_p = cpu_dai->private_data; - struct ssc_device *ssc = ssc_p->ssc; - unsigned int pll_out = 0, bclk = 0, mclk_div = 0; - int ret; - - - /* Due to difficulties with getting the correct clocks from the AT32's - * PLL0, we're going to let the CODEC be in charge of all the clocks - */ -#if !defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE - const unsigned int fmt = (SND_SOC_DAIFMT_I2S | - SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBM_CFM); -#else - struct ssc_clock_data cd; - const unsigned int fmt = (SND_SOC_DAIFMT_I2S | - SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBS_CFS); -#endif - - if (ssc == NULL) { - pr_warning("playpaq_wm8510_hw_params: ssc is NULL!\n"); - return -EINVAL; - } - - - /* - * Figure out PLL and BCLK dividers for WM8510 - */ - switch (params_rate(params)) { - case 48000: - pll_out = 12288000; - mclk_div = WM8510_MCLKDIV_1; - bclk = WM8510_BCLKDIV_8; - break; - - case 44100: - pll_out = 11289600; - mclk_div = WM8510_MCLKDIV_1; - bclk = WM8510_BCLKDIV_8; - break; - - case 22050: - pll_out = 11289600; - mclk_div = WM8510_MCLKDIV_2; - bclk = WM8510_BCLKDIV_8; - break; - - case 16000: - pll_out = 12288000; - mclk_div = WM8510_MCLKDIV_3; - bclk = WM8510_BCLKDIV_8; - break; - - case 11025: - pll_out = 11289600; - mclk_div = WM8510_MCLKDIV_4; - bclk = WM8510_BCLKDIV_8; - break; - - case 8000: - pll_out = 12288000; - mclk_div = WM8510_MCLKDIV_6; - bclk = WM8510_BCLKDIV_8; - break; - - default: - pr_warning("playpaq_wm8510: Unsupported sample rate %d\n", - params_rate(params)); - return -EINVAL; - } - - - /* - * set CPU and CODEC DAI configuration - */ - ret = snd_soc_dai_set_fmt(codec_dai, fmt); - if (ret < 0) { - pr_warning("playpaq_wm8510: " - "Failed to set CODEC DAI format (%d)\n", - ret); - return ret; - } - ret = snd_soc_dai_set_fmt(cpu_dai, fmt); - if (ret < 0) { - pr_warning("playpaq_wm8510: " - "Failed to set CPU DAI format (%d)\n", - ret); - return ret; - } - - - /* - * Set CPU clock configuration - */ -#if defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE - cd = playpaq_wm8510_calc_ssc_clock(params, cpu_dai); - pr_debug("playpaq_wm8510: cmr_div = %d, period = %d\n", - cd.cmr_div, cd.period); - ret = snd_soc_dai_set_clkdiv(cpu_dai, AT32_SSC_CMR_DIV, cd.cmr_div); - if (ret < 0) { - pr_warning("playpaq_wm8510: Failed to set CPU CMR_DIV (%d)\n", - ret); - return ret; - } - ret = snd_soc_dai_set_clkdiv(cpu_dai, AT32_SSC_TCMR_PERIOD, - cd.period); - if (ret < 0) { - pr_warning("playpaq_wm8510: " - "Failed to set CPU transmit period (%d)\n", - ret); - return ret; - } -#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */ - - - /* - * Set CODEC clock configuration - */ - pr_debug("playpaq_wm8510: " - "pll_in = %ld, pll_out = %u, bclk = %x, mclk = %x\n", - clk_get_rate(CODEC_CLK), pll_out, bclk, mclk_div); - - -#if !defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE - ret = snd_soc_dai_set_clkdiv(codec_dai, WM8510_BCLKDIV, bclk); - if (ret < 0) { - pr_warning - ("playpaq_wm8510: Failed to set CODEC DAI BCLKDIV (%d)\n", - ret); - return ret; - } -#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */ - - - ret = snd_soc_dai_set_pll(codec_dai, 0, - clk_get_rate(CODEC_CLK), pll_out); - if (ret < 0) { - pr_warning("playpaq_wm8510: Failed to set CODEC DAI PLL (%d)\n", - ret); - return ret; - } - - - ret = snd_soc_dai_set_clkdiv(codec_dai, WM8510_MCLKDIV, mclk_div); - if (ret < 0) { - pr_warning("playpaq_wm8510: Failed to set CODEC MCLKDIV (%d)\n", - ret); - return ret; - } - - - return 0; -} - - - -static struct snd_soc_ops playpaq_wm8510_ops = { - .hw_params = playpaq_wm8510_hw_params, -}; - - - -static const struct snd_soc_dapm_widget playpaq_dapm_widgets[] = { - SND_SOC_DAPM_MIC("Int Mic", NULL), - SND_SOC_DAPM_SPK("Ext Spk", NULL), -}; - - - -static const char *intercon[][3] = { - /* speaker connected to SPKOUT */ - {"Ext Spk", NULL, "SPKOUTP"}, - {"Ext Spk", NULL, "SPKOUTN"}, - - {"Mic Bias", NULL, "Int Mic"}, - {"MICN", NULL, "Mic Bias"}, - {"MICP", NULL, "Mic Bias"}, - - /* Terminator */ - {NULL, NULL, NULL}, -}; - - - -static int playpaq_wm8510_init(struct snd_soc_codec *codec) -{ - int i; - - /* - * Add DAPM widgets - */ - for (i = 0; i < ARRAY_SIZE(playpaq_dapm_widgets); i++) - snd_soc_dapm_new_control(codec, &playpaq_dapm_widgets[i]); - - - - /* - * Setup audio path interconnects - */ - for (i = 0; intercon[i][0] != NULL; i++) { - snd_soc_dapm_connect_input(codec, - intercon[i][0], - intercon[i][1], intercon[i][2]); - } - - - /* always connected pins */ - snd_soc_dapm_enable_pin(codec, "Int Mic"); - snd_soc_dapm_enable_pin(codec, "Ext Spk"); - snd_soc_dapm_sync(codec); - - - - /* Make CSB show PLL rate */ - snd_soc_dai_set_clkdiv(codec->dai, WM8510_OPCLKDIV, - WM8510_OPCLKDIV_1 | 4); - - return 0; -} - - - -static struct snd_soc_dai_link playpaq_wm8510_dai = { - .name = "WM8510", - .stream_name = "WM8510 PCM", - .cpu_dai = &at32_ssc_dai[0], - .codec_dai = &wm8510_dai, - .init = playpaq_wm8510_init, - .ops = &playpaq_wm8510_ops, -}; - - - -static struct snd_soc_machine snd_soc_machine_playpaq = { - .name = "LRS_PlayPaq_WM8510", - .dai_link = &playpaq_wm8510_dai, - .num_links = 1, -}; - - - -static struct wm8510_setup_data playpaq_wm8510_setup = { - .i2c_address = 0x1a, -}; - - - -static struct snd_soc_device playpaq_wm8510_snd_devdata = { - .machine = &snd_soc_machine_playpaq, - .platform = &at32_soc_platform, - .codec_dev = &soc_codec_dev_wm8510, - .codec_data = &playpaq_wm8510_setup, -}; - -static struct platform_device *playpaq_snd_device; - - -static int __init playpaq_asoc_init(void) -{ - int ret = 0; - struct at32_ssc_info *ssc_p = playpaq_wm8510_dai.cpu_dai->private_data; - struct ssc_device *ssc = NULL; - - - /* - * Request SSC device - */ - ssc = ssc_request(0); - if (IS_ERR(ssc)) { - ret = PTR_ERR(ssc); - ssc = NULL; - goto err_ssc; - } - ssc_p->ssc = ssc; - - - /* - * Configure MCLK for WM8510 - */ - _gclk0 = clk_get(NULL, "gclk0"); - if (IS_ERR(_gclk0)) { - _gclk0 = NULL; - goto err_gclk0; - } - _pll0 = clk_get(NULL, "pll0"); - if (IS_ERR(_pll0)) { - _pll0 = NULL; - goto err_pll0; - } - if (clk_set_parent(_gclk0, _pll0)) { - pr_warning("snd-soc-playpaq: " - "Failed to set PLL0 as parent for DAC clock\n"); - goto err_set_clk; - } - clk_set_rate(CODEC_CLK, 12000000); - clk_enable(CODEC_CLK); - -#if defined CONFIG_AT32_ENHANCED_PORTMUX - at32_select_periph(MCLK_PIN, MCLK_PERIPH, 0); -#endif - - - /* - * Create and register platform device - */ - playpaq_snd_device = platform_device_alloc("soc-audio", 0); - if (playpaq_snd_device == NULL) { - ret = -ENOMEM; - goto err_device_alloc; - } - - platform_set_drvdata(playpaq_snd_device, &playpaq_wm8510_snd_devdata); - playpaq_wm8510_snd_devdata.dev = &playpaq_snd_device->dev; - - ret = platform_device_add(playpaq_snd_device); - if (ret) { - pr_warning("playpaq_wm8510: platform_device_add failed (%d)\n", - ret); - goto err_device_add; - } - - return 0; - - -err_device_add: - if (playpaq_snd_device != NULL) { - platform_device_put(playpaq_snd_device); - playpaq_snd_device = NULL; - } -err_device_alloc: -err_set_clk: - if (_pll0 != NULL) { - clk_put(_pll0); - _pll0 = NULL; - } -err_pll0: - if (_gclk0 != NULL) { - clk_put(_gclk0); - _gclk0 = NULL; - } -err_gclk0: - if (ssc != NULL) { - ssc_free(ssc); - ssc = NULL; - } -err_ssc: - return ret; -} - - -static void __exit playpaq_asoc_exit(void) -{ - struct at32_ssc_info *ssc_p = playpaq_wm8510_dai.cpu_dai->private_data; - struct ssc_device *ssc; - - if (ssc_p != NULL) { - ssc = ssc_p->ssc; - if (ssc != NULL) - ssc_free(ssc); - ssc_p->ssc = NULL; - } - - if (_gclk0 != NULL) { - clk_put(_gclk0); - _gclk0 = NULL; - } - if (_pll0 != NULL) { - clk_put(_pll0); - _pll0 = NULL; - } - -#if defined CONFIG_AT32_ENHANCED_PORTMUX - at32_free_pin(MCLK_PIN); -#endif - - platform_device_unregister(playpaq_snd_device); - playpaq_snd_device = NULL; -} - -module_init(playpaq_asoc_init); -module_exit(playpaq_asoc_exit); - -MODULE_AUTHOR("Geoffrey Wossum <gwossum(a)acm.org>"); -MODULE_DESCRIPTION("ASoC machine driver for LRS PlayPaq"); -MODULE_LICENSE("GPL"); diff --git a/sound/soc/at91/Kconfig b/sound/soc/at91/Kconfig deleted file mode 100644 index 9051865..0000000 --- a/sound/soc/at91/Kconfig +++ /dev/null @@ -1,27 +0,0 @@ -config SND_AT91_SOC - tristate "SoC Audio for the Atmel AT91 System-on-Chip" - depends on ARCH_AT91 - help - Say Y or M if you want to add support for codecs attached to - the AT91 SSC interface. You will also need - to select the audio interfaces to support below. - -config SND_AT91_SOC_SSC - tristate - -config SND_AT91_SOC_ETI_B1_WM8731 - tristate "SoC Audio support for WM8731-based Endrelia ETI-B1 boards" - depends on SND_AT91_SOC && (MACH_ETI_B1 || MACH_ETI_C1) - select SND_AT91_SOC_SSC - select SND_SOC_WM8731 - help - Say Y if you want to add support for SoC audio on WM8731-based - Endrelia Technologies Inc ETI-B1 or ETI-C1 boards. - -config SND_AT91_SOC_ETI_SLAVE - bool "Run codec in slave Mode on Endrelia boards" - depends on SND_AT91_SOC_ETI_B1_WM8731 - default n - help - Say Y if you want to run with the AT91 SSC generating the BCLK - and LRC signals on Endrelia boards. diff --git a/sound/soc/at91/Makefile b/sound/soc/at91/Makefile deleted file mode 100644 index f23da17..0000000 --- a/sound/soc/at91/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# AT91 Platform Support -snd-soc-at91-objs := at91-pcm.o -snd-soc-at91-ssc-objs := at91-ssc.o - -obj-$(CONFIG_SND_AT91_SOC) += snd-soc-at91.o -obj-$(CONFIG_SND_AT91_SOC_SSC) += snd-soc-at91-ssc.o - -# AT91 Machine Support -snd-soc-eti-b1-wm8731-objs := eti_b1_wm8731.o - -obj-$(CONFIG_SND_AT91_SOC_ETI_B1_WM8731) += snd-soc-eti-b1-wm8731.o diff --git a/sound/soc/at91/at91-pcm.c b/sound/soc/at91/at91-pcm.c deleted file mode 100644 index 7ab48bd..0000000 --- a/sound/soc/at91/at91-pcm.c +++ /dev/null @@ -1,434 +0,0 @@ -/* - * at91-pcm.c -- ALSA PCM interface for the Atmel AT91 SoC - * - * Author: Frank Mandarino <fmandarino(a)endrelia.com> - * Endrelia Technologies Inc. - * Created: Mar 3, 2006 - * - * Based on pxa2xx-pcm.c by: - * - * Author: Nicolas Pitre - * Created: Nov 30, 2004 - * Copyright: (C) 2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/dma-mapping.h> -#include <linux/atmel_pdc.h> - -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/pcm_params.h> -#include <sound/soc.h> - -#include <mach/hardware.h> -#include <mach/at91_ssc.h> - -#include "at91-pcm.h" - -#if 0 -#define DBG(x...) printk(KERN_INFO "at91-pcm: " x) -#else -#define DBG(x...) -#endif - -static const struct snd_pcm_hardware at91_pcm_hardware = { - .info = SNDRV_PCM_INFO_MMAP | - SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_INTERLEAVED | - SNDRV_PCM_INFO_PAUSE, - .formats = SNDRV_PCM_FMTBIT_S16_LE, - .period_bytes_min = 32, - .period_bytes_max = 8192, - .periods_min = 2, - .periods_max = 1024, - .buffer_bytes_max = 32 * 1024, -}; - -struct at91_runtime_data { - struct at91_pcm_dma_params *params; - dma_addr_t dma_buffer; /* physical address of dma buffer */ - dma_addr_t dma_buffer_end; /* first address beyond DMA buffer */ - size_t period_size; - dma_addr_t period_ptr; /* physical address of next period */ - u32 pdc_xpr_save; /* PDC register save */ - u32 pdc_xcr_save; - u32 pdc_xnpr_save; - u32 pdc_xncr_save; -}; - -static void at91_pcm_dma_irq(u32 ssc_sr, - struct snd_pcm_substream *substream) -{ - struct at91_runtime_data *prtd = substream->runtime->private_data; - struct at91_pcm_dma_params *params = prtd->params; - static int count = 0; - - count++; - - if (ssc_sr & params->mask->ssc_endbuf) { - - printk(KERN_WARNING - "at91-pcm: buffer %s on %s (SSC_SR=%#x, count=%d)\n", - substream->stream == SNDRV_PCM_STREAM_PLAYBACK - ? "underrun" : "overrun", - params->name, ssc_sr, count); - - /* re-start the PDC */ - at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_disable); - - prtd->period_ptr += prtd->period_size; - if (prtd->period_ptr >= prtd->dma_buffer_end) { - prtd->period_ptr = prtd->dma_buffer; - } - - at91_ssc_write(params->ssc_base + params->pdc->xpr, prtd->period_ptr); - at91_ssc_write(params->ssc_base + params->pdc->xcr, - prtd->period_size / params->pdc_xfer_size); - - at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_enable); - } - - if (ssc_sr & params->mask->ssc_endx) { - - /* Load the PDC next pointer and counter registers */ - prtd->period_ptr += prtd->period_size; - if (prtd->period_ptr >= prtd->dma_buffer_end) { - prtd->period_ptr = prtd->dma_buffer; - } - at91_ssc_write(params->ssc_base + params->pdc->xnpr, - prtd->period_ptr); - at91_ssc_write(params->ssc_base + params->pdc->xncr, - prtd->period_size / params->pdc_xfer_size); - } - - snd_pcm_period_elapsed(substream); -} - -static int at91_pcm_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_pcm_runtime *runtime = substream->runtime; - struct at91_runtime_data *prtd = runtime->private_data; - struct snd_soc_pcm_runtime *rtd = substream->private_data; - - /* this may get called several times by oss emulation - * with different params */ - - snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); - runtime->dma_bytes = params_buffer_bytes(params); - - prtd->params = rtd->dai->cpu_dai->dma_data; - prtd->params->dma_intr_handler = at91_pcm_dma_irq; - - prtd->dma_buffer = runtime->dma_addr; - prtd->dma_buffer_end = runtime->dma_addr + runtime->dma_bytes; - prtd->period_size = params_period_bytes(params); - - DBG("hw_params: DMA for %s initialized (dma_bytes=%d, period_size=%d)\n", - prtd->params->name, runtime->dma_bytes, prtd->period_size); - return 0; -} - -static int at91_pcm_hw_free(struct snd_pcm_substream *substream) -{ - struct at91_runtime_data *prtd = substream->runtime->private_data; - struct at91_pcm_dma_params *params = prtd->params; - - if (params != NULL) { - at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_disable); - prtd->params->dma_intr_handler = NULL; - } - - return 0; -} - -static int at91_pcm_prepare(struct snd_pcm_substream *substream) -{ - struct at91_runtime_data *prtd = substream->runtime->private_data; - struct at91_pcm_dma_params *params = prtd->params; - - at91_ssc_write(params->ssc_base + AT91_SSC_IDR, - params->mask->ssc_endx | params->mask->ssc_endbuf); - - at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_disable); - return 0; -} - -static int at91_pcm_trigger(struct snd_pcm_substream *substream, - int cmd) -{ - struct at91_runtime_data *prtd = substream->runtime->private_data; - struct at91_pcm_dma_params *params = prtd->params; - int ret = 0; - - switch (cmd) { - case SNDRV_PCM_TRIGGER_START: - prtd->period_ptr = prtd->dma_buffer; - - at91_ssc_write(params->ssc_base + params->pdc->xpr, prtd->period_ptr); - at91_ssc_write(params->ssc_base + params->pdc->xcr, - prtd->period_size / params->pdc_xfer_size); - - prtd->period_ptr += prtd->period_size; - at91_ssc_write(params->ssc_base + params->pdc->xnpr, prtd->period_ptr); - at91_ssc_write(params->ssc_base + params->pdc->xncr, - prtd->period_size / params->pdc_xfer_size); - - DBG("trigger: period_ptr=%lx, xpr=%lx, xcr=%ld, xnpr=%lx, xncr=%ld\n", - (unsigned long) prtd->period_ptr, - at91_ssc_read(params->ssc_base + params->pdc->xpr), - at91_ssc_read(params->ssc_base + params->pdc->xcr), - at91_ssc_read(params->ssc_base + params->pdc->xnpr), - at91_ssc_read(params->ssc_base + params->pdc->xncr)); - - at91_ssc_write(params->ssc_base + AT91_SSC_IER, - params->mask->ssc_endx | params->mask->ssc_endbuf); - - at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, - params->mask->pdc_enable); - - DBG("sr=%lx imr=%lx\n", - at91_ssc_read(params->ssc_base + AT91_SSC_SR), - at91_ssc_read(params->ssc_base + AT91_SSC_IMR)); - break; - - case SNDRV_PCM_TRIGGER_STOP: - case SNDRV_PCM_TRIGGER_SUSPEND: - case SNDRV_PCM_TRIGGER_PAUSE_PUSH: - at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_disable); - break; - - case SNDRV_PCM_TRIGGER_RESUME: - case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_enable); - break; - - default: - ret = -EINVAL; - } - - return ret; -} - -static snd_pcm_uframes_t at91_pcm_pointer( - struct snd_pcm_substream *substream) -{ - struct snd_pcm_runtime *runtime = substream->runtime; - struct at91_runtime_data *prtd = runtime->private_data; - struct at91_pcm_dma_params *params = prtd->params; - dma_addr_t ptr; - snd_pcm_uframes_t x; - - ptr = (dma_addr_t) at91_ssc_read(params->ssc_base + params->pdc->xpr); - x = bytes_to_frames(runtime, ptr - prtd->dma_buffer); - - if (x == runtime->buffer_size) - x = 0; - return x; -} - -static int at91_pcm_open(struct snd_pcm_substream *substream) -{ - struct snd_pcm_runtime *runtime = substream->runtime; - struct at91_runtime_data *prtd; - int ret = 0; - - snd_soc_set_runtime_hwparams(substream, &at91_pcm_hardware); - - /* ensure that buffer size is a multiple of period size */ - ret = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS); - if (ret < 0) - goto out; - - prtd = kzalloc(sizeof(struct at91_runtime_data), GFP_KERNEL); - if (prtd == NULL) { - ret = -ENOMEM; - goto out; - } - runtime->private_data = prtd; - - out: - return ret; -} - -static int at91_pcm_close(struct snd_pcm_substream *substream) -{ - struct at91_runtime_data *prtd = substream->runtime->private_data; - - kfree(prtd); - return 0; -} - -static int at91_pcm_mmap(struct snd_pcm_substream *substream, - struct vm_area_struct *vma) -{ - struct snd_pcm_runtime *runtime = substream->runtime; - - return dma_mmap_writecombine(substream->pcm->card->dev, vma, - runtime->dma_area, - runtime->dma_addr, - runtime->dma_bytes); -} - -struct snd_pcm_ops at91_pcm_ops = { - .open = at91_pcm_open, - .close = at91_pcm_close, - .ioctl = snd_pcm_lib_ioctl, - .hw_params = at91_pcm_hw_params, - .hw_free = at91_pcm_hw_free, - .prepare = at91_pcm_prepare, - .trigger = at91_pcm_trigger, - .pointer = at91_pcm_pointer, - .mmap = at91_pcm_mmap, -}; - -static int at91_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, - int stream) -{ - struct snd_pcm_substream *substream = pcm->streams[stream].substream; - struct snd_dma_buffer *buf = &substream->dma_buffer; - size_t size = at91_pcm_hardware.buffer_bytes_max; - - buf->dev.type = SNDRV_DMA_TYPE_DEV; - buf->dev.dev = pcm->card->dev; - buf->private_data = NULL; - buf->area = dma_alloc_writecombine(pcm->card->dev, size, - &buf->addr, GFP_KERNEL); - - DBG("preallocate_dma_buffer: area=%p, addr=%p, size=%d\n", - (void *) buf->area, - (void *) buf->addr, - size); - - if (!buf->area) - return -ENOMEM; - - buf->bytes = size; - return 0; -} - -static u64 at91_pcm_dmamask = 0xffffffff; - -static int at91_pcm_new(struct snd_card *card, - struct snd_soc_dai *dai, struct snd_pcm *pcm) -{ - int ret = 0; - - if (!card->dev->dma_mask) - card->dev->dma_mask = &at91_pcm_dmamask; - if (!card->dev->coherent_dma_mask) - card->dev->coherent_dma_mask = 0xffffffff; - - if (dai->playback.channels_min) { - ret = at91_pcm_preallocate_dma_buffer(pcm, - SNDRV_PCM_STREAM_PLAYBACK); - if (ret) - goto out; - } - - if (dai->capture.channels_min) { - ret = at91_pcm_preallocate_dma_buffer(pcm, - SNDRV_PCM_STREAM_CAPTURE); - if (ret) - goto out; - } - out: - return ret; -} - -static void at91_pcm_free_dma_buffers(struct snd_pcm *pcm) -{ - struct snd_pcm_substream *substream; - struct snd_dma_buffer *buf; - int stream; - - for (stream = 0; stream < 2; stream++) { - substream = pcm->streams[stream].substream; - if (!substream) - continue; - - buf = &substream->dma_buffer; - if (!buf->area) - continue; - - dma_free_writecombine(pcm->card->dev, buf->bytes, - buf->area, buf->addr); - buf->area = NULL; - } -} - -#ifdef CONFIG_PM -static int at91_pcm_suspend(struct platform_device *pdev, - struct snd_soc_dai *dai) -{ - struct snd_pcm_runtime *runtime = dai->runtime; - struct at91_runtime_data *prtd; - struct at91_pcm_dma_params *params; - - if (!runtime) - return 0; - - prtd = runtime->private_data; - params = prtd->params; - - /* disable the PDC and save the PDC registers */ - - at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_disable); - - prtd->pdc_xpr_save = at91_ssc_read(params->ssc_base + params->pdc->xpr); - prtd->pdc_xcr_save = at91_ssc_read(params->ssc_base + params->pdc->xcr); - prtd->pdc_xnpr_save = at91_ssc_read(params->ssc_base + params->pdc->xnpr); - prtd->pdc_xncr_save = at91_ssc_read(params->ssc_base + params->pdc->xncr); - - return 0; -} - -static int at91_pcm_resume(struct platform_device *pdev, - struct snd_soc_dai *dai) -{ - struct snd_pcm_runtime *runtime = dai->runtime; - struct at91_runtime_data *prtd; - struct at91_pcm_dma_params *params; - - if (!runtime) - return 0; - - prtd = runtime->private_data; - params = prtd->params; - - /* restore the PDC registers and enable the PDC */ - at91_ssc_write(params->ssc_base + params->pdc->xpr, prtd->pdc_xpr_save); - at91_ssc_write(params->ssc_base + params->pdc->xcr, prtd->pdc_xcr_save); - at91_ssc_write(params->ssc_base + params->pdc->xnpr, prtd->pdc_xnpr_save); - at91_ssc_write(params->ssc_base + params->pdc->xncr, prtd->pdc_xncr_save); - - at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_enable); - return 0; -} -#else -#define at91_pcm_suspend NULL -#define at91_pcm_resume NULL -#endif - -struct snd_soc_platform at91_soc_platform = { - .name = "at91-audio", - .pcm_ops = &at91_pcm_ops, - .pcm_new = at91_pcm_new, - .pcm_free = at91_pcm_free_dma_buffers, - .suspend = at91_pcm_suspend, - .resume = at91_pcm_resume, -}; - -EXPORT_SYMBOL_GPL(at91_soc_platform); - -MODULE_AUTHOR("Frank Mandarino <fmandarino(a)endrelia.com>"); -MODULE_DESCRIPTION("Atmel AT91 PCM module"); -MODULE_LICENSE("GPL"); diff --git a/sound/soc/at91/at91-pcm.h b/sound/soc/at91/at91-pcm.h deleted file mode 100644 index e5aada2..0000000 --- a/sound/soc/at91/at91-pcm.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - * at91-pcm.h - ALSA PCM interface for the Atmel AT91 SoC - * - * Author: Frank Mandarino <fmandarino(a)endrelia.com> - * Endrelia Technologies Inc. - * Created: Mar 3, 2006 - * - * Based on pxa2xx-pcm.h by: - * - * Author: Nicolas Pitre - * Created: Nov 30, 2004 - * Copyright: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef _AT91_PCM_H -#define _AT91_PCM_H - -#include <mach/hardware.h> - -struct at91_ssc_periph { - void __iomem *base; - u32 pid; -}; - -/* - * Registers and status bits that are required by the PCM driver. - */ -struct at91_pdc_regs { - unsigned int xpr; /* PDC recv/trans pointer */ - unsigned int xcr; /* PDC recv/trans counter */ - unsigned int xnpr; /* PDC next recv/trans pointer */ - unsigned int xncr; /* PDC next recv/trans counter */ - unsigned int ptcr; /* PDC transfer control */ -}; - -struct at91_ssc_mask { - u32 ssc_enable; /* SSC recv/trans enable */ - u32 ssc_disable; /* SSC recv/trans disable */ - u32 ssc_endx; /* SSC ENDTX or ENDRX */ - u32 ssc_endbuf; /* SSC TXBUFE or RXBUFF */ - u32 pdc_enable; /* PDC recv/trans enable */ - u32 pdc_disable; /* PDC recv/trans disable */ -}; - -/* - * This structure, shared between the PCM driver and the interface, - * contains all information required by the PCM driver to perform the - * PDC DMA operation. All fields except dma_intr_handler() are initialized - * by the interface. The dms_intr_handler() pointer is set by the PCM - * driver and called by the interface SSC interrupt handler if it is - * non-NULL. - */ -struct at91_pcm_dma_params { - char *name; /* stream identifier */ - int pdc_xfer_size; /* PDC counter increment in bytes */ - void __iomem *ssc_base; /* SSC base address */ - struct at91_pdc_regs *pdc; /* PDC receive or transmit registers */ - struct at91_ssc_mask *mask;/* SSC & PDC status bits */ - struct snd_pcm_substream *substream; - void (*dma_intr_handler)(u32, struct snd_pcm_substream *); -}; - -extern struct snd_soc_platform at91_soc_platform; - -#define at91_ssc_read(a) ((unsigned long) __raw_readl(a)) -#define at91_ssc_write(a,v) __raw_writel((v),(a)) - -#endif /* _AT91_PCM_H */ diff --git a/sound/soc/at91/at91-ssc.c b/sound/soc/at91/at91-ssc.c deleted file mode 100644 index 5d44515..0000000 --- a/sound/soc/at91/at91-ssc.c +++ /dev/null @@ -1,791 +0,0 @@ -/* - * at91-ssc.c -- ALSA SoC AT91 SSC Audio Layer Platform driver - * - * Author: Frank Mandarino <fmandarino(a)endrelia.com> - * Endrelia Technologies Inc. - * - * Based on pxa2xx Platform drivers by - * Liam Girdwood <liam.girdwood(a)wolfsonmicro.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/device.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/atmel_pdc.h> - -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/pcm_params.h> -#include <sound/initval.h> -#include <sound/soc.h> - -#include <mach/hardware.h> -#include <mach/at91_pmc.h> -#include <mach/at91_ssc.h> - -#include "at91-pcm.h" -#include "at91-ssc.h" - -#if 0 -#define DBG(x...) printk(KERN_DEBUG "at91-ssc:" x) -#else -#define DBG(x...) -#endif - -#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20) -#define NUM_SSC_DEVICES 1 -#else -#define NUM_SSC_DEVICES 3 -#endif - - -/* - * SSC PDC registers required by the PCM DMA engine. - */ -static struct at91_pdc_regs pdc_tx_reg = { - .xpr = ATMEL_PDC_TPR, - .xcr = ATMEL_PDC_TCR, - .xnpr = ATMEL_PDC_TNPR, - .xncr = ATMEL_PDC_TNCR, -}; - -static struct at91_pdc_regs pdc_rx_reg = { - .xpr = ATMEL_PDC_RPR, - .xcr = ATMEL_PDC_RCR, - .xnpr = ATMEL_PDC_RNPR, - .xncr = ATMEL_PDC_RNCR, -}; - -/* - * SSC & PDC status bits for transmit and receive. - */ -static struct at91_ssc_mask ssc_tx_mask = { - .ssc_enable = AT91_SSC_TXEN, - .ssc_disable = AT91_SSC_TXDIS, - .ssc_endx = AT91_SSC_ENDTX, - .ssc_endbuf = AT91_SSC_TXBUFE, - .pdc_enable = ATMEL_PDC_TXTEN, - .pdc_disable = ATMEL_PDC_TXTDIS, -}; - -static struct at91_ssc_mask ssc_rx_mask = { - .ssc_enable = AT91_SSC_RXEN, - .ssc_disable = AT91_SSC_RXDIS, - .ssc_endx = AT91_SSC_ENDRX, - .ssc_endbuf = AT91_SSC_RXBUFF, - .pdc_enable = ATMEL_PDC_RXTEN, - .pdc_disable = ATMEL_PDC_RXTDIS, -}; - - -/* - * DMA parameters. - */ -static struct at91_pcm_dma_params ssc_dma_params[NUM_SSC_DEVICES][2] = { - {{ - .name = "SSC0 PCM out", - .pdc = &pdc_tx_reg, - .mask = &ssc_tx_mask, - }, - { - .name = "SSC0 PCM in", - .pdc = &pdc_rx_reg, - .mask = &ssc_rx_mask, - }}, -#if NUM_SSC_DEVICES == 3 - {{ - .name = "SSC1 PCM out", - .pdc = &pdc_tx_reg, - .mask = &ssc_tx_mask, - }, - { - .name = "SSC1 PCM in", - .pdc = &pdc_rx_reg, - .mask = &ssc_rx_mask, - }}, - {{ - .name = "SSC2 PCM out", - .pdc = &pdc_tx_reg, - .mask = &ssc_tx_mask, - }, - { - .name = "SSC2 PCM in", - .pdc = &pdc_rx_reg, - .mask = &ssc_rx_mask, - }}, -#endif -}; - -struct at91_ssc_state { - u32 ssc_cmr; - u32 ssc_rcmr; - u32 ssc_rfmr; - u32 ssc_tcmr; - u32 ssc_tfmr; - u32 ssc_sr; - u32 ssc_imr; -}; - -static struct at91_ssc_info { - char *name; - struct at91_ssc_periph ssc; - spinlock_t lock; /* lock for dir_mask */ - unsigned short dir_mask; /* 0=unused, 1=playback, 2=capture */ - unsigned short initialized; /* 1=SSC has been initialized */ - unsigned short daifmt; - unsigned short cmr_div; - unsigned short tcmr_period; - unsigned short rcmr_period; - struct at91_pcm_dma_params *dma_params[2]; - struct at91_ssc_state ssc_state; - -} ssc_info[NUM_SSC_DEVICES] = { - { - .name = "ssc0", - .lock = __SPIN_LOCK_UNLOCKED(ssc_info[0].lock), - .dir_mask = 0, - .initialized = 0, - }, -#if NUM_SSC_DEVICES == 3 - { - .name = "ssc1", - .lock = __SPIN_LOCK_UNLOCKED(ssc_info[1].lock), - .dir_mask = 0, - .initialized = 0, - }, - { - .name = "ssc2", - .lock = __SPIN_LOCK_UNLOCKED(ssc_info[2].lock), - .dir_mask = 0, - .initialized = 0, - }, -#endif -}; - -static unsigned int at91_ssc_sysclk; - -/* - * SSC interrupt handler. Passes PDC interrupts to the DMA - * interrupt handler in the PCM driver. - */ -static irqreturn_t at91_ssc_interrupt(int irq, void *dev_id) -{ - struct at91_ssc_info *ssc_p = dev_id; - struct at91_pcm_dma_params *dma_params; - u32 ssc_sr; - int i; - - ssc_sr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_SR) - & at91_ssc_read(ssc_p->ssc.base + AT91_SSC_IMR); - - /* - * Loop through the substreams attached to this SSC. If - * a DMA-related interrupt occurred on that substream, call - * the DMA interrupt handler function, if one has been - * registered in the dma_params structure by the PCM driver. - */ - for (i = 0; i < ARRAY_SIZE(ssc_p->dma_params); i++) { - dma_params = ssc_p->dma_params[i]; - - if (dma_params != NULL && dma_params->dma_intr_handler != NULL && - (ssc_sr & - (dma_params->mask->ssc_endx | dma_params->mask->ssc_endbuf))) - - dma_params->dma_intr_handler(ssc_sr, dma_params->substream); - } - - return IRQ_HANDLED; -} - -/* - * Startup. Only that one substream allowed in each direction. - */ -static int at91_ssc_startup(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct at91_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; - int dir_mask; - - DBG("ssc_startup: SSC_SR=0x%08lx\n", - at91_ssc_read(ssc_p->ssc.base + AT91_SSC_SR)); - dir_mask = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0x1 : 0x2; - - spin_lock_irq(&ssc_p->lock); - if (ssc_p->dir_mask & dir_mask) { - spin_unlock_irq(&ssc_p->lock); - return -EBUSY; - } - ssc_p->dir_mask |= dir_mask; - spin_unlock_irq(&ssc_p->lock); - - return 0; -} - -/* - * Shutdown. Clear DMA parameters and shutdown the SSC if there - * are no other substreams open. - */ -static void at91_ssc_shutdown(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct at91_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; - struct at91_pcm_dma_params *dma_params; - int dir, dir_mask; - - dir = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1; - dma_params = ssc_p->dma_params[dir]; - - if (dma_params != NULL) { - at91_ssc_write(dma_params->ssc_base + AT91_SSC_CR, - dma_params->mask->ssc_disable); - DBG("%s disabled SSC_SR=0x%08lx\n", (dir ? "receive" : "transmit"), - at91_ssc_read(ssc_p->ssc.base + AT91_SSC_SR)); - - dma_params->ssc_base = NULL; - dma_params->substream = NULL; - ssc_p->dma_params[dir] = NULL; - } - - dir_mask = 1 << dir; - - spin_lock_irq(&ssc_p->lock); - ssc_p->dir_mask &= ~dir_mask; - if (!ssc_p->dir_mask) { - /* Shutdown the SSC clock. */ - DBG("Stopping pid %d clock\n", ssc_p->ssc.pid); - at91_sys_write(AT91_PMC_PCDR, 1<<ssc_p->ssc.pid); - - if (ssc_p->initialized) { - free_irq(ssc_p->ssc.pid, ssc_p); - ssc_p->initialized = 0; - } - - /* Reset the SSC */ - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CR, AT91_SSC_SWRST); - - /* Clear the SSC dividers */ - ssc_p->cmr_div = ssc_p->tcmr_period = ssc_p->rcmr_period = 0; - } - spin_unlock_irq(&ssc_p->lock); -} - -/* - * Record the SSC system clock rate. - */ -static int at91_ssc_set_dai_sysclk(struct snd_soc_dai *cpu_dai, - int clk_id, unsigned int freq, int dir) -{ - /* - * The only clock supplied to the SSC is the AT91 master clock, - * which is only used if the SSC is generating BCLK and/or - * LRC clocks. - */ - switch (clk_id) { - case AT91_SYSCLK_MCK: - at91_ssc_sysclk = freq; - break; - default: - return -EINVAL; - } - - return 0; -} - -/* - * Record the DAI format for use in hw_params(). - */ -static int at91_ssc_set_dai_fmt(struct snd_soc_dai *cpu_dai, - unsigned int fmt) -{ - struct at91_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; - - ssc_p->daifmt = fmt; - return 0; -} - -/* - * Record SSC clock dividers for use in hw_params(). - */ -static int at91_ssc_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, - int div_id, int div) -{ - struct at91_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; - - switch (div_id) { - case AT91SSC_CMR_DIV: - /* - * The same master clock divider is used for both - * transmit and receive, so if a value has already - * been set, it must match this value. - */ - if (ssc_p->cmr_div == 0) - ssc_p->cmr_div = div; - else - if (div != ssc_p->cmr_div) - return -EBUSY; - break; - - case AT91SSC_TCMR_PERIOD: - ssc_p->tcmr_period = div; - break; - - case AT91SSC_RCMR_PERIOD: - ssc_p->rcmr_period = div; - break; - - default: - return -EINVAL; - } - - return 0; -} - -/* - * Configure the SSC. - */ -static int at91_ssc_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - int id = rtd->dai->cpu_dai->id; - struct at91_ssc_info *ssc_p = &ssc_info[id]; - struct at91_pcm_dma_params *dma_params; - int dir, channels, bits; - u32 tfmr, rfmr, tcmr, rcmr; - int start_event; - int ret; - - /* - * Currently, there is only one set of dma params for - * each direction. If more are added, this code will - * have to be changed to select the proper set. - */ - dir = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1; - - dma_params = &ssc_dma_params[id][dir]; - dma_params->ssc_base = ssc_p->ssc.base; - dma_params->substream = substream; - - ssc_p->dma_params[dir] = dma_params; - - /* - * The cpu_dai->dma_data field is only used to communicate the - * appropriate DMA parameters to the pcm driver hw_params() - * function. It should not be used for other purposes - * as it is common to all substreams. - */ - rtd->dai->cpu_dai->dma_data = dma_params; - - channels = params_channels(params); - - /* - * Determine sample size in bits and the PDC increment. - */ - switch(params_format(params)) { - case SNDRV_PCM_FORMAT_S8: - bits = 8; - dma_params->pdc_xfer_size = 1; - break; - case SNDRV_PCM_FORMAT_S16_LE: - bits = 16; - dma_params->pdc_xfer_size = 2; - break; - case SNDRV_PCM_FORMAT_S24_LE: - bits = 24; - dma_params->pdc_xfer_size = 4; - break; - case SNDRV_PCM_FORMAT_S32_LE: - bits = 32; - dma_params->pdc_xfer_size = 4; - break; - default: - printk(KERN_WARNING "at91-ssc: unsupported PCM format"); - return -EINVAL; - } - - /* - * The SSC only supports up to 16-bit samples in I2S format, due - * to the size of the Frame Mode Register FSLEN field. - */ - if ((ssc_p->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_I2S - && bits > 16) { - printk(KERN_WARNING - "at91-ssc: sample size %d is too large for I2S\n", bits); - return -EINVAL; - } - - /* - * Compute SSC register settings. - */ - switch (ssc_p->daifmt - & (SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_MASTER_MASK)) { - - case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS: - /* - * I2S format, SSC provides BCLK and LRC clocks. - * - * The SSC transmit and receive clocks are generated from the - * MCK divider, and the BCLK signal is output on the SSC TK line. - */ - rcmr = (( ssc_p->rcmr_period << 24) & AT91_SSC_PERIOD) - | (( 1 << 16) & AT91_SSC_STTDLY) - | (( AT91_SSC_START_FALLING_RF ) & AT91_SSC_START) - | (( AT91_SSC_CK_RISING ) & AT91_SSC_CKI) - | (( AT91_SSC_CKO_NONE ) & AT91_SSC_CKO) - | (( AT91_SSC_CKS_DIV ) & AT91_SSC_CKS); - - rfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE) - | (( AT91_SSC_FSOS_NEGATIVE ) & AT91_SSC_FSOS) - | (((bits - 1) << 16) & AT91_SSC_FSLEN) - | (((channels - 1) << 8) & AT91_SSC_DATNB) - | (( 1 << 7) & AT91_SSC_MSBF) - | (( 0 << 5) & AT91_SSC_LOOP) - | (((bits - 1) << 0) & AT91_SSC_DATALEN); - - tcmr = (( ssc_p->tcmr_period << 24) & AT91_SSC_PERIOD) - | (( 1 << 16) & AT91_SSC_STTDLY) - | (( AT91_SSC_START_FALLING_RF ) & AT91_SSC_START) - | (( AT91_SSC_CKI_FALLING ) & AT91_SSC_CKI) - | (( AT91_SSC_CKO_CONTINUOUS ) & AT91_SSC_CKO) - | (( AT91_SSC_CKS_DIV ) & AT91_SSC_CKS); - - tfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE) - | (( 0 << 23) & AT91_SSC_FSDEN) - | (( AT91_SSC_FSOS_NEGATIVE ) & AT91_SSC_FSOS) - | (((bits - 1) << 16) & AT91_SSC_FSLEN) - | (((channels - 1) << 8) & AT91_SSC_DATNB) - | (( 1 << 7) & AT91_SSC_MSBF) - | (( 0 << 5) & AT91_SSC_DATDEF) - | (((bits - 1) << 0) & AT91_SSC_DATALEN); - break; - - case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM: - /* - * I2S format, CODEC supplies BCLK and LRC clocks. - * - * The SSC transmit clock is obtained from the BCLK signal on - * on the TK line, and the SSC receive clock is generated from the - * transmit clock. - * - * For single channel data, one sample is transferred on the falling - * edge of the LRC clock. For two channel data, one sample is - * transferred on both edges of the LRC clock. - */ - start_event = channels == 1 - ? AT91_SSC_START_FALLING_RF - : AT91_SSC_START_EDGE_RF; - - rcmr = (( 0 << 24) & AT91_SSC_PERIOD) - | (( 1 << 16) & AT91_SSC_STTDLY) - | (( start_event ) & AT91_SSC_START) - | (( AT91_SSC_CK_RISING ) & AT91_SSC_CKI) - | (( AT91_SSC_CKO_NONE ) & AT91_SSC_CKO) - | (( AT91_SSC_CKS_CLOCK ) & AT91_SSC_CKS); - - rfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE) - | (( AT91_SSC_FSOS_NONE ) & AT91_SSC_FSOS) - | (( 0 << 16) & AT91_SSC_FSLEN) - | (( 0 << 8) & AT91_SSC_DATNB) - | (( 1 << 7) & AT91_SSC_MSBF) - | (( 0 << 5) & AT91_SSC_LOOP) - | (((bits - 1) << 0) & AT91_SSC_DATALEN); - - tcmr = (( 0 << 24) & AT91_SSC_PERIOD) - | (( 1 << 16) & AT91_SSC_STTDLY) - | (( start_event ) & AT91_SSC_START) - | (( AT91_SSC_CKI_FALLING ) & AT91_SSC_CKI) - | (( AT91_SSC_CKO_NONE ) & AT91_SSC_CKO) - | (( AT91_SSC_CKS_PIN ) & AT91_SSC_CKS); - - tfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE) - | (( 0 << 23) & AT91_SSC_FSDEN) - | (( AT91_SSC_FSOS_NONE ) & AT91_SSC_FSOS) - | (( 0 << 16) & AT91_SSC_FSLEN) - | (( 0 << 8) & AT91_SSC_DATNB) - | (( 1 << 7) & AT91_SSC_MSBF) - | (( 0 << 5) & AT91_SSC_DATDEF) - | (((bits - 1) << 0) & AT91_SSC_DATALEN); - break; - - case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS: - /* - * DSP/PCM Mode A format, SSC provides BCLK and LRC clocks. - * - * The SSC transmit and receive clocks are generated from the - * MCK divider, and the BCLK signal is output on the SSC TK line. - */ - rcmr = (( ssc_p->rcmr_period << 24) & AT91_SSC_PERIOD) - | (( 1 << 16) & AT91_SSC_STTDLY) - | (( AT91_SSC_START_RISING_RF ) & AT91_SSC_START) - | (( AT91_SSC_CK_RISING ) & AT91_SSC_CKI) - | (( AT91_SSC_CKO_NONE ) & AT91_SSC_CKO) - | (( AT91_SSC_CKS_DIV ) & AT91_SSC_CKS); - - rfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE) - | (( AT91_SSC_FSOS_POSITIVE ) & AT91_SSC_FSOS) - | (( 0 << 16) & AT91_SSC_FSLEN) - | (((channels - 1) << 8) & AT91_SSC_DATNB) - | (( 1 << 7) & AT91_SSC_MSBF) - | (( 0 << 5) & AT91_SSC_LOOP) - | (((bits - 1) << 0) & AT91_SSC_DATALEN); - - tcmr = (( ssc_p->tcmr_period << 24) & AT91_SSC_PERIOD) - | (( 1 << 16) & AT91_SSC_STTDLY) - | (( AT91_SSC_START_RISING_RF ) & AT91_SSC_START) - | (( AT91_SSC_CK_RISING ) & AT91_SSC_CKI) - | (( AT91_SSC_CKO_CONTINUOUS ) & AT91_SSC_CKO) - | (( AT91_SSC_CKS_DIV ) & AT91_SSC_CKS); - - tfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE) - | (( 0 << 23) & AT91_SSC_FSDEN) - | (( AT91_SSC_FSOS_POSITIVE ) & AT91_SSC_FSOS) - | (( 0 << 16) & AT91_SSC_FSLEN) - | (((channels - 1) << 8) & AT91_SSC_DATNB) - | (( 1 << 7) & AT91_SSC_MSBF) - | (( 0 << 5) & AT91_SSC_DATDEF) - | (((bits - 1) << 0) & AT91_SSC_DATALEN); - - - - break; - - case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM: - default: - printk(KERN_WARNING "at91-ssc: unsupported DAI format 0x%x.\n", - ssc_p->daifmt); - return -EINVAL; - break; - } - DBG("RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n", rcmr, rfmr, tcmr, tfmr); - - if (!ssc_p->initialized) { - - /* Enable PMC peripheral clock for this SSC */ - DBG("Starting pid %d clock\n", ssc_p->ssc.pid); - at91_sys_write(AT91_PMC_PCER, 1<<ssc_p->ssc.pid); - - /* Reset the SSC and its PDC registers */ - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CR, AT91_SSC_SWRST); - - at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_RPR, 0); - at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_RCR, 0); - at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_RNPR, 0); - at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_RNCR, 0); - at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_TPR, 0); - at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_TCR, 0); - at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_TNPR, 0); - at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_TNCR, 0); - - if ((ret = request_irq(ssc_p->ssc.pid, at91_ssc_interrupt, - 0, ssc_p->name, ssc_p)) < 0) { - printk(KERN_WARNING "at91-ssc: request_irq failure\n"); - - DBG("Stopping pid %d clock\n", ssc_p->ssc.pid); - at91_sys_write(AT91_PMC_PCDR, 1<<ssc_p->ssc.pid); - return ret; - } - - ssc_p->initialized = 1; - } - - /* set SSC clock mode register */ - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CMR, ssc_p->cmr_div); - - /* set receive clock mode and format */ - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_RCMR, rcmr); - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_RFMR, rfmr); - - /* set transmit clock mode and format */ - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_TCMR, tcmr); - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_TFMR, tfmr); - - DBG("hw_params: SSC initialized\n"); - return 0; -} - - -static int at91_ssc_prepare(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct at91_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; - struct at91_pcm_dma_params *dma_params; - int dir; - - dir = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1; - dma_params = ssc_p->dma_params[dir]; - - at91_ssc_write(dma_params->ssc_base + AT91_SSC_CR, - dma_params->mask->ssc_enable); - - DBG("%s enabled SSC_SR=0x%08lx\n", dir ? "receive" : "transmit", - at91_ssc_read(dma_params->ssc_base + AT91_SSC_SR)); - return 0; -} - - -#ifdef CONFIG_PM -static int at91_ssc_suspend(struct platform_device *pdev, - struct snd_soc_dai *cpu_dai) -{ - struct at91_ssc_info *ssc_p; - - if(!cpu_dai->active) - return 0; - - ssc_p = &ssc_info[cpu_dai->id]; - - /* Save the status register before disabling transmit and receive. */ - ssc_p->ssc_state.ssc_sr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_SR); - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CR, - AT91_SSC_TXDIS | AT91_SSC_RXDIS); - - /* Save the current interrupt mask, then disable unmasked interrupts. */ - ssc_p->ssc_state.ssc_imr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_IMR); - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_IDR, ssc_p->ssc_state.ssc_imr); - - ssc_p->ssc_state.ssc_cmr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_CMR); - ssc_p->ssc_state.ssc_rcmr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_RCMR); - ssc_p->ssc_state.ssc_rfmr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_RFMR); - ssc_p->ssc_state.ssc_tcmr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_TCMR); - ssc_p->ssc_state.ssc_tfmr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_TFMR); - - return 0; -} - -static int at91_ssc_resume(struct platform_device *pdev, - struct snd_soc_dai *cpu_dai) -{ - struct at91_ssc_info *ssc_p; - - if(!cpu_dai->active) - return 0; - - ssc_p = &ssc_info[cpu_dai->id]; - - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_TFMR, ssc_p->ssc_state.ssc_tfmr); - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_TCMR, ssc_p->ssc_state.ssc_tcmr); - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_RFMR, ssc_p->ssc_state.ssc_rfmr); - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_RCMR, ssc_p->ssc_state.ssc_rcmr); - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CMR, ssc_p->ssc_state.ssc_cmr); - - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_IER, ssc_p->ssc_state.ssc_imr); - - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CR, - ((ssc_p->ssc_state.ssc_sr & AT91_SSC_RXENA) ? AT91_SSC_RXEN : 0) | - ((ssc_p->ssc_state.ssc_sr & AT91_SSC_TXENA) ? AT91_SSC_TXEN : 0)); - - return 0; -} - -#else -#define at91_ssc_suspend NULL -#define at91_ssc_resume NULL -#endif - -#define AT91_SSC_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\ - SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\ - SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\ - SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 |\ - SNDRV_PCM_RATE_96000) - -#define AT91_SSC_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\ - SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) - -struct snd_soc_dai at91_ssc_dai[NUM_SSC_DEVICES] = { - { .name = "at91-ssc0", - .id = 0, - .type = SND_SOC_DAI_PCM, - .suspend = at91_ssc_suspend, - .resume = at91_ssc_resume, - .playback = { - .channels_min = 1, - .channels_max = 2, - .rates = AT91_SSC_RATES, - .formats = AT91_SSC_FORMATS,}, - .capture = { - .channels_min = 1, - .channels_max = 2, - .rates = AT91_SSC_RATES, - .formats = AT91_SSC_FORMATS,}, - .ops = { - .startup = at91_ssc_startup, - .shutdown = at91_ssc_shutdown, - .prepare = at91_ssc_prepare, - .hw_params = at91_ssc_hw_params,}, - .dai_ops = { - .set_sysclk = at91_ssc_set_dai_sysclk, - .set_fmt = at91_ssc_set_dai_fmt, - .set_clkdiv = at91_ssc_set_dai_clkdiv,}, - .private_data = &ssc_info[0].ssc, - }, -#if NUM_SSC_DEVICES == 3 - { .name = "at91-ssc1", - .id = 1, - .type = SND_SOC_DAI_PCM, - .suspend = at91_ssc_suspend, - .resume = at91_ssc_resume, - .playback = { - .channels_min = 1, - .channels_max = 2, - .rates = AT91_SSC_RATES, - .formats = AT91_SSC_FORMATS,}, - .capture = { - .channels_min = 1, - .channels_max = 2, - .rates = AT91_SSC_RATES, - .formats = AT91_SSC_FORMATS,}, - .ops = { - .startup = at91_ssc_startup, - .shutdown = at91_ssc_shutdown, - .prepare = at91_ssc_prepare, - .hw_params = at91_ssc_hw_params,}, - .dai_ops = { - .set_sysclk = at91_ssc_set_dai_sysclk, - .set_fmt = at91_ssc_set_dai_fmt, - .set_clkdiv = at91_ssc_set_dai_clkdiv,}, - .private_data = &ssc_info[1].ssc, - }, - { .name = "at91-ssc2", - .id = 2, - .type = SND_SOC_DAI_PCM, - .suspend = at91_ssc_suspend, - .resume = at91_ssc_resume, - .playback = { - .channels_min = 1, - .channels_max = 2, - .rates = AT91_SSC_RATES, - .formats = AT91_SSC_FORMATS,}, - .capture = { - .channels_min = 1, - .channels_max = 2, - .rates = AT91_SSC_RATES, - .formats = AT91_SSC_FORMATS,}, - .ops = { - .startup = at91_ssc_startup, - .shutdown = at91_ssc_shutdown, - .prepare = at91_ssc_prepare, - .hw_params = at91_ssc_hw_params,}, - .dai_ops = { - .set_sysclk = at91_ssc_set_dai_sysclk, - .set_fmt = at91_ssc_set_dai_fmt, - .set_clkdiv = at91_ssc_set_dai_clkdiv,}, - .private_data = &ssc_info[2].ssc, - }, -#endif -}; - -EXPORT_SYMBOL_GPL(at91_ssc_dai); - -/* Module information */ -MODULE_AUTHOR("Frank Mandarino, fmandarino(a)endrelia.com, www.endrelia.com"); -MODULE_DESCRIPTION("AT91 SSC ASoC Interface"); -MODULE_LICENSE("GPL"); diff --git a/sound/soc/at91/at91-ssc.h b/sound/soc/at91/at91-ssc.h deleted file mode 100644 index 6b7bf38..0000000 --- a/sound/soc/at91/at91-ssc.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * at91-ssc.h - ALSA SSC interface for the Atmel AT91 SoC - * - * Author: Frank Mandarino <fmandarino(a)endrelia.com> - * Endrelia Technologies Inc. - * Created: Jan 9, 2007 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef _AT91_SSC_H -#define _AT91_SSC_H - -/* SSC system clock ids */ -#define AT91_SYSCLK_MCK 0 /* SSC uses AT91 MCK as system clock */ - -/* SSC divider ids */ -#define AT91SSC_CMR_DIV 0 /* MCK divider for BCLK */ -#define AT91SSC_TCMR_PERIOD 1 /* BCLK divider for transmit FS */ -#define AT91SSC_RCMR_PERIOD 2 /* BCLK divider for receive FS */ - -extern struct snd_soc_dai at91_ssc_dai[]; - -#endif /* _AT91_SSC_H */ - diff --git a/sound/soc/at91/eti_b1_wm8731.c b/sound/soc/at91/eti_b1_wm8731.c deleted file mode 100644 index b81d6b2..0000000 --- a/sound/soc/at91/eti_b1_wm8731.c +++ /dev/null @@ -1,348 +0,0 @@ -/* - * eti_b1_wm8731 -- SoC audio for AT91RM9200-based Endrelia ETI_B1 board. - * - * Author: Frank Mandarino <fmandarino(a)endrelia.com> - * Endrelia Technologies Inc. - * Created: Mar 29, 2006 - * - * Based on corgi.c by: - * - * Copyright 2005 Wolfson Microelectronics PLC. - * Copyright 2005 Openedhand Ltd. - * - * Authors: Liam Girdwood <liam.girdwood(a)wolfsonmicro.com> - * Richard Purdie <richard(a)openedhand.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/kernel.h> -#include <linux/clk.h> -#include <linux/timer.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/soc.h> -#include <sound/soc-dapm.h> - -#include <mach/hardware.h> -#include <mach/gpio.h> - -#include "../codecs/wm8731.h" -#include "at91-pcm.h" -#include "at91-ssc.h" - -#if 0 -#define DBG(x...) printk(KERN_INFO "eti_b1_wm8731: " x) -#else -#define DBG(x...) -#endif - -static struct clk *pck1_clk; -static struct clk *pllb_clk; - - -static int eti_b1_startup(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; - struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; - int ret; - - /* cpu clock is the AT91 master clock sent to the SSC */ - ret = snd_soc_dai_set_sysclk(cpu_dai, AT91_SYSCLK_MCK, - 60000000, SND_SOC_CLOCK_IN); - if (ret < 0) - return ret; - - /* codec system clock is supplied by PCK1, set to 12MHz */ - ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK, - 12000000, SND_SOC_CLOCK_IN); - if (ret < 0) - return ret; - - /* Start PCK1 clock. */ - clk_enable(pck1_clk); - DBG("pck1 started\n"); - - return 0; -} - -static void eti_b1_shutdown(struct snd_pcm_substream *substream) -{ - /* Stop PCK1 clock. */ - clk_disable(pck1_clk); - DBG("pck1 stopped\n"); -} - -static int eti_b1_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; - struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; - int ret; - -#ifdef CONFIG_SND_AT91_SOC_ETI_SLAVE - unsigned int rate; - int cmr_div, period; - - /* set codec DAI configuration */ - ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | - SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); - if (ret < 0) - return ret; - - /* set cpu DAI configuration */ - ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | - SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); - if (ret < 0) - return ret; - - /* - * The SSC clock dividers depend on the sample rate. The CMR.DIV - * field divides the system master clock MCK to drive the SSC TK - * signal which provides the codec BCLK. The TCMR.PERIOD and - * RCMR.PERIOD fields further divide the BCLK signal to drive - * the SSC TF and RF signals which provide the codec DACLRC and - * ADCLRC clocks. - * - * The dividers were determined through trial and error, where a - * CMR.DIV value is chosen such that the resulting BCLK value is - * divisible, or almost divisible, by (2 * sample rate), and then - * the TCMR.PERIOD or RCMR.PERIOD is BCLK / (2 * sample rate) - 1. - */ - rate = params_rate(params); - - switch (rate) { - case 8000: - cmr_div = 25; /* BCLK = 60MHz/(2*25) = 1.2MHz */ - period = 74; /* LRC = BCLK/(2*(74+1)) = 8000Hz */ - break; - case 32000: - cmr_div = 7; /* BCLK = 60MHz/(2*7) ~= 4.28571428MHz */ - period = 66; /* LRC = BCLK/(2*(66+1)) = 31982.942Hz */ - break; - case 48000: - cmr_div = 13; /* BCLK = 60MHz/(2*13) ~= 2.3076923MHz */ - period = 23; /* LRC = BCLK/(2*(23+1)) = 48076.923Hz */ - break; - default: - printk(KERN_WARNING "unsupported rate %d on ETI-B1 board\n", rate); - return -EINVAL; - } - - /* set the MCK divider for BCLK */ - ret = snd_soc_dai_set_clkdiv(cpu_dai, AT91SSC_CMR_DIV, cmr_div); - if (ret < 0) - return ret; - - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { - /* set the BCLK divider for DACLRC */ - ret = snd_soc_dai_set_clkdiv(cpu_dai, - AT91SSC_TCMR_PERIOD, period); - } else { - /* set the BCLK divider for ADCLRC */ - ret = snd_soc_dai_set_clkdiv(cpu_dai, - AT91SSC_RCMR_PERIOD, period); - } - if (ret < 0) - return ret; - -#else /* CONFIG_SND_AT91_SOC_ETI_SLAVE */ - /* - * Codec in Master Mode. - */ - - /* set codec DAI configuration */ - ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | - SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM); - if (ret < 0) - return ret; - - /* set cpu DAI configuration */ - ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | - SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM); - if (ret < 0) - return ret; - -#endif /* CONFIG_SND_AT91_SOC_ETI_SLAVE */ - - return 0; -} - -static struct snd_soc_ops eti_b1_ops = { - .startup = eti_b1_startup, - .hw_params = eti_b1_hw_params, - .shutdown = eti_b1_shutdown, -}; - - -static const struct snd_soc_dapm_widget eti_b1_dapm_widgets[] = { - SND_SOC_DAPM_MIC("Int Mic", NULL), - SND_SOC_DAPM_SPK("Ext Spk", NULL), -}; - -static const struct snd_soc_dapm_route intercon[] = { - - /* speaker connected to LHPOUT */ - {"Ext Spk", NULL, "LHPOUT"}, - - /* mic is connected to Mic Jack, with WM8731 Mic Bias */ - {"MICIN", NULL, "Mic Bias"}, - {"Mic Bias", NULL, "Int Mic"}, -}; - -/* - * Logic for a wm8731 as connected on a Endrelia ETI-B1 board. - */ -static int eti_b1_wm8731_init(struct snd_soc_codec *codec) -{ - DBG("eti_b1_wm8731_init() called\n"); - - /* Add specific widgets */ - snd_soc_dapm_new_controls(codec, eti_b1_dapm_widgets, - ARRAY_SIZE(eti_b1_dapm_widgets)); - - /* Set up specific audio path interconnects */ - snd_soc_dapm_add_route(codec, intercon, ARRAY_SIZE(intercon)); - - /* not connected */ - snd_soc_dapm_disable_pin(codec, "RLINEIN"); - snd_soc_dapm_disable_pin(codec, "LLINEIN"); - - /* always connected */ - snd_soc_dapm_enable_pin(codec, "Int Mic"); - snd_soc_dapm_enable_pin(codec, "Ext Spk"); - - snd_soc_dapm_sync(codec); - - return 0; -} - -static struct snd_soc_dai_link eti_b1_dai = { - .name = "WM8731", - .stream_name = "WM8731 PCM", - .cpu_dai = &at91_ssc_dai[1], - .codec_dai = &wm8731_dai, - .init = eti_b1_wm8731_init, - .ops = &eti_b1_ops, -}; - -static struct snd_soc_machine snd_soc_machine_eti_b1 = { - .name = "ETI_B1_WM8731", - .dai_link = &eti_b1_dai, - .num_links = 1, -}; - -static struct wm8731_setup_data eti_b1_wm8731_setup = { - .i2c_address = 0x1a, -}; - -static struct snd_soc_device eti_b1_snd_devdata = { - .machine = &snd_soc_machine_eti_b1, - .platform = &at91_soc_platform, - .codec_dev = &soc_codec_dev_wm8731, - .codec_data = &eti_b1_wm8731_setup, -}; - -static struct platform_device *eti_b1_snd_device; - -static int __init eti_b1_init(void) -{ - int ret; - struct at91_ssc_periph *ssc = eti_b1_dai.cpu_dai->private_data; - - if (!request_mem_region(AT91RM9200_BASE_SSC1, SZ_16K, "soc-audio")) { - DBG("SSC1 memory region is busy\n"); - return -EBUSY; - } - - ssc->base = ioremap(AT91RM9200_BASE_SSC1, SZ_16K); - if (!ssc->base) { - DBG("SSC1 memory ioremap failed\n"); - ret = -ENOMEM; - goto fail_release_mem; - } - - ssc->pid = AT91RM9200_ID_SSC1; - - eti_b1_snd_device = platform_device_alloc("soc-audio", -1); - if (!eti_b1_snd_device) { - DBG("platform device allocation failed\n"); - ret = -ENOMEM; - goto fail_io_unmap; - } - - platform_set_drvdata(eti_b1_snd_device, &eti_b1_snd_devdata); - eti_b1_snd_devdata.dev = &eti_b1_snd_device->dev; - - ret = platform_device_add(eti_b1_snd_device); - if (ret) { - DBG("platform device add failed\n"); - platform_device_put(eti_b1_snd_device); - goto fail_io_unmap; - } - - at91_set_A_periph(AT91_PIN_PB6, 0); /* TF1 */ - at91_set_A_periph(AT91_PIN_PB7, 0); /* TK1 */ - at91_set_A_periph(AT91_PIN_PB8, 0); /* TD1 */ - at91_set_A_periph(AT91_PIN_PB9, 0); /* RD1 */ -/* at91_set_A_periph(AT91_PIN_PB10, 0);*/ /* RK1 */ - at91_set_A_periph(AT91_PIN_PB11, 0); /* RF1 */ - - /* - * Set PCK1 parent to PLLB and its rate to 12 Mhz. - */ - pllb_clk = clk_get(NULL, "pllb"); - pck1_clk = clk_get(NULL, "pck1"); - - clk_set_parent(pck1_clk, pllb_clk); - clk_set_rate(pck1_clk, 12000000); - - DBG("MCLK rate %luHz\n", clk_get_rate(pck1_clk)); - - /* assign the GPIO pin to PCK1 */ - at91_set_B_periph(AT91_PIN_PA24, 0); - -#ifdef CONFIG_SND_AT91_SOC_ETI_SLAVE - printk(KERN_INFO "eti_b1_wm8731: Codec in Slave Mode\n"); -#else - printk(KERN_INFO "eti_b1_wm8731: Codec in Master Mode\n"); -#endif - return ret; - -fail_io_unmap: - iounmap(ssc->base); -fail_release_mem: - release_mem_region(AT91RM9200_BASE_SSC1, SZ_16K); - return ret; -} - -static void __exit eti_b1_exit(void) -{ - struct at91_ssc_periph *ssc = eti_b1_dai.cpu_dai->private_data; - - clk_put(pck1_clk); - clk_put(pllb_clk); - - platform_device_unregister(eti_b1_snd_device); - - iounmap(ssc->base); - release_mem_region(AT91RM9200_BASE_SSC1, SZ_16K); -} - -module_init(eti_b1_init); -module_exit(eti_b1_exit); - -/* Module information */ -MODULE_AUTHOR("Frank Mandarino <fmandarino(a)endrelia.com>"); -MODULE_DESCRIPTION("ALSA SoC ETI-B1-WM8731"); -MODULE_LICENSE("GPL");

1 0

[alsa-devel] alsa-plugins is missing from the listing on http://git.alsa-project.org/
by Lennart Poettering 25 Sep '08

25 Sep '08

Heya! When I open http://git.alsa-project.org/ in my web browser I don't see the alsa-plugins repo listed there although it actually is existant. There's something wrong with the gitweb installation... Lennart -- Lennart Poettering Red Hat, Inc. lennart [at] poettering [dot] net ICQ# 11060553 http://0pointer.net/lennart/ GnuPG 0x1A015CC4

1 0

[alsa-devel] [PATCH] alsa-plugins: Fix destruction logic on failed construction
by Lennart Poettering 25 Sep '08

25 Sep '08

Heya! We need to stop the main loop first, then free the context and finally free the mainloop. --- pulse/pulse.c | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-) diff --git a/pulse/pulse.c b/pulse/pulse.c index 022ca55..3940238 100644 --- a/pulse/pulse.c +++ b/pulse/pulse.c @@ -208,6 +208,12 @@ snd_pulse_t *pulse_new(void) fail: if (p->mainloop) + pa_threaded_mainloop_stop(p->mainloop); + + if (p->context) + pa_context_unref(p->context); + + if (p->mainloop) pa_threaded_mainloop_free(p->mainloop); if (p->main_fd >= 0) -- 1.6.0.1 Lennart -- Lennart Poettering Red Hat, Inc. lennart [at] poettering [dot] net ICQ# 11060553 http://0pointer.net/lennart/ GnuPG 0x1A015CC4

1 0

[alsa-devel] [PATCH] alsa-plugins: Fix destruction order on failure
by Lennart Poettering 25 Sep '08

25 Sep '08

Heya! If we failure we should make sure the event loop thread is not running and hence not accessing our source/sink strings before we free those strings. --- pulse/ctl_pulse.c | 7 ++----- 1 files changed, 2 insertions(+), 5 deletions(-) diff --git a/pulse/ctl_pulse.c b/pulse/ctl_pulse.c index 0b10628..8a5546c 100644 --- a/pulse/ctl_pulse.c +++ b/pulse/ctl_pulse.c @@ -728,14 +728,11 @@ SND_CTL_PLUGIN_DEFINE_FUNC(pulse) return 0; error: - if (ctl->source) - free(ctl->source); - if (ctl->sink) - free(ctl->sink); - if (ctl->p) pulse_free(ctl->p); + free(ctl->source); + free(ctl->sink); free(ctl); return err; -- 1.6.0.1 Lennart -- Lennart Poettering Red Hat, Inc. lennart [at] poettering [dot] net ICQ# 11060553 http://0pointer.net/lennart/ GnuPG 0x1A015CC4

1 0

[alsa-devel] [PATCH] alsa-plugins: fix minor memory leak
by Lennart Poettering 25 Sep '08

25 Sep '08

Heya! If we fail, we need to free the device string --- pulse/pcm_pulse.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/pulse/pcm_pulse.c b/pulse/pcm_pulse.c index 9a50aff..a5f794f 100644 --- a/pulse/pcm_pulse.c +++ b/pulse/pcm_pulse.c @@ -917,6 +917,7 @@ error: if (pcm->p) pulse_free(pcm->p); + free(pcm->device); free(pcm); return err; -- 1.6.0.1 Lennart -- Lennart Poettering Red Hat, Inc. lennart [at] poettering [dot] net ICQ# 11060553 http://0pointer.net/lennart/ GnuPG 0x1A015CC4

1 0

[alsa-devel] [PATCH] hda: slave_dig_outs code block in wrong location
by Matthew Ranostay 25 Sep '08

25 Sep '08

Removed invalid references to slave_dig_outs inside the S/PDIF IN capture switch control. Beforehand this was basically a mute switch for the S/PDIF outs as well. Signed-off-by: Matthew Ranostay <mranostay(a)embeddedalley.com> --- diff --git a/pci/hda/hda_codec.c b/pci/hda/hda_codec.c index c742e10..cb9aae5 100644 --- a/pci/hda/hda_codec.c +++ b/pci/hda/hda_codec.c @@ -1652,15 +1652,9 @@ static int snd_hda_spdif_in_switch_put(struct snd_kcontrol *kcontrol, mutex_lock(&codec->spdif_mutex); change = codec->spdif_in_enable != val; if (change) { - hda_nid_t *d; codec->spdif_in_enable = val; snd_hda_codec_write_cache(codec, nid, 0, AC_VERB_SET_DIGI_CONVERT_1, val); - - if (codec->slave_dig_outs) - for (d = codec->slave_dig_outs; *d; d++) - snd_hda_codec_write_cache(codec, *d, 0, - AC_VERB_SET_DIGI_CONVERT_1, val); } mutex_unlock(&codec->spdif_mutex); return change;

2 1