- Alsa-devel - mailman.alsa-project.org

[alsa-devel] (no subject)
by Philippe CARRIERE 14 Oct '08

14 Oct '08

Le mardi 14 octobre 2008 à 13:29 +0200, Karsten Wiese a écrit : Am Dienstag, 14. Oktober 2008 schrieb Philippe Carriere: > > Might this patch (the original one, without features yet implemented in > > 2.6.26, and an extremely slight modification to fit it) I use on Fedora > > kernel (the patch also applies as it stands to vanilla) save works and > > time ? > > maybe. > I guess the patch would have to fit what will become 2.6.28. > > > regards, > Karsten > _______________________________________________ > Alsa-devel mailing list > Alsa-devel(a)alsa-project.org > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel > Thus I can try to follow the next evolution of the kernel and send you new version of the patch, when required; would it be fruitful for you ? During that time, I will try to implement a module modification (presently, I propose a whole kernel which is not the right solution), but I have some things to learn about the method. A last question: you commented some lines in us122l.c which are concerned with the possible support of US-144 (which apparently has a very similar hardware): do you think support of US-144 would be possible - to be tested of course - with the same driver or do you think it would require more work ? Regards Phil

1 0

Re: [alsa-devel] [PATCH] alsa: Emagic Audiowerk8 low-level ALSA driver
by matthias.nyffenegger＠bluewin.ch 14 Oct '08

14 Oct '08

At 13.10.2008 12:32 tiwai(a)suse.de wrote: Hi Takashi, >[please stop top-posting] Ok, sorry for that. >I don't care in which direction, whether to merge yours into aw2 or >aw2 into yours. I just want to have a reasonable merge of two >works. > >Well, this is basically an option, and can be achieved later, too. >So, could you post the patches to ML for further reviews? Yes, I'll do that soon. >But before submitting patches, I recommend you to run once >scripts/checkpatch.pl (found in kernel tree) with your patches. >You'll find lots of coding style issues even by such a simple tool. >Then, check Documentation/CodingStyle and fix your codes again. > >And, please remove the debug trace stuff unless you really need it in >future. This decreases readability fairly much. I guess you refer to the 0.1 sourceforge release -> I actually did that before submitting aw-alsa-patch-0.2. Anyway, I'll post the patch again, this time in Mail body, following your recommendations. Thank you for helping. Regards, Matthias

1 0

[alsa-devel] [PATCH 1/1] [ALSA] Allow setting codec register with debugfs filesystem
by Troy Kisky 14 Oct '08

14 Oct '08

i.e. echo 6 59 >/sys/kernel/debug/soc-audio.0/codec_reg will set register 0x06 to a value of 0x59. Also, pop_time debugfs interface setup is moved so that it is setup in the same function as codec_reg Signed-off-by: Troy Kisky <troy.kisky(a)boundarydevices.com> diff --git a/include/sound/soc.h b/include/sound/soc.h index a1e0357..d33825d 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -425,6 +425,7 @@ struct snd_soc_codec { short reg_cache_step; /* dapm */ + u32 pop_time; struct list_head dapm_widgets; struct list_head dapm_paths; enum snd_soc_bias_level bias_level; @@ -516,6 +517,9 @@ struct snd_soc_device { struct delayed_work delayed_work; struct work_struct deferred_resume_work; void *codec_data; +#ifdef CONFIG_DEBUG_FS + struct dentry *debugfs_root; +#endif }; /* runtime channel data */ diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index ad38113..db720b1 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -27,6 +27,7 @@ #include <linux/delay.h> #include <linux/pm.h> #include <linux/bitops.h> +#include <linux/debugfs.h> #include <linux/platform_device.h> #include <sound/core.h> #include <sound/pcm.h> @@ -962,10 +963,8 @@ static int soc_new_pcm(struct snd_soc_device *socdev, } /* codec register dump */ -static ssize_t codec_reg_show(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t soc_codec_reg_show(struct snd_soc_device *devdata, char *buf) { - struct snd_soc_device *devdata = dev_get_drvdata(dev); struct snd_soc_codec *codec = devdata->codec; int i, step = 1, count = 0; @@ -1002,8 +1001,117 @@ static ssize_t codec_reg_show(struct device *dev, return count; } +static ssize_t codec_reg_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct snd_soc_device *devdata = dev_get_drvdata(dev); + return soc_codec_reg_show(devdata, buf); +} + static DEVICE_ATTR(codec_reg, 0444, codec_reg_show, NULL); +#ifdef CONFIG_DEBUG_FS +static int codec_reg_open_file(struct inode *inode, struct file *file) +{ + file->private_data = inode->i_private; + return 0; +} + +static ssize_t codec_reg_read_file(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + ssize_t ret; + struct snd_soc_device *devdata = file->private_data; + char *buf = kmalloc(PAGE_SIZE, GFP_KERNEL); + if (!buf) + return -ENOMEM; + ret = soc_codec_reg_show(devdata, buf); + if (ret >= 0) + ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret); + kfree(buf); + return ret; +} + +static ssize_t codec_reg_write_file(struct file *file, + const char __user *user_buf, size_t count, loff_t *ppos) +{ + char buf[32]; + int buf_size; + char *start = buf; + unsigned long reg, value; + int step = 1; + struct snd_soc_device *devdata = file->private_data; + struct snd_soc_codec *codec = devdata->codec; + + buf_size = min(count, (sizeof(buf)-1)); + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + buf[buf_size] = 0; + + if (codec->reg_cache_step) + step = codec->reg_cache_step; + + while (*start == ' ') + start++; + reg = simple_strtoul(start, &start, 16); + if ((reg >= codec->reg_cache_size) || (reg % step)) + return -EINVAL; + while (*start == ' ') + start++; + if (strict_strtoul(start, 16, &value)) + return -EINVAL; + codec->write(codec, reg, value); + return buf_size; +} + +static const struct file_operations codec_reg_fops = { + .open = codec_reg_open_file, + .read = codec_reg_read_file, + .write = codec_reg_write_file, +}; + +static void soc_init_debugfs(struct snd_soc_device *socdev) +{ + struct dentry *root, *file; + struct snd_soc_codec *codec = socdev->codec; + root = debugfs_create_dir(dev_name(socdev->dev), NULL); + if (IS_ERR(root) || !root) + goto exit1; + + file = debugfs_create_file("codec_reg", 0644, + root, socdev, &codec_reg_fops); + if (!file) + goto exit2; + + file = debugfs_create_u32("dapm_pop_time", 0744, + root, &codec->pop_time); + if (!file) + goto exit2; + socdev->debugfs_root = root; + return; +exit2: + debugfs_remove_recursive(root); +exit1: + dev_err(socdev->dev, "debugfs is not available\n"); +} + +static void soc_cleanup_debugfs(struct snd_soc_device *socdev) +{ + debugfs_remove_recursive(socdev->debugfs_root); + socdev->debugfs_root = NULL; +} + +#else + +static inline void soc_init_debugfs(struct snd_soc_device *socdev) +{ +} + +static inline void soc_cleanup_debugfs(struct snd_soc_device *socdev) +{ +} +#endif + /** * snd_soc_new_ac97_codec - initailise AC97 device * @codec: audio codec @@ -1217,6 +1325,7 @@ int snd_soc_register_card(struct snd_soc_device *socdev) if (err < 0) printk(KERN_WARNING "asoc: failed to add codec sysfs files\n"); + soc_init_debugfs(socdev); mutex_unlock(&codec->mutex); out: @@ -1240,6 +1349,7 @@ void snd_soc_free_pcms(struct snd_soc_device *socdev) #endif mutex_lock(&codec->mutex); + soc_cleanup_debugfs(socdev); #ifdef CONFIG_SND_SOC_AC97_BUS for (i = 0; i < codec->num_dai; i++) { codec_dai = &codec->dai[i]; diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 9ca9c08..1bd88ac 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -38,7 +38,6 @@ #include <linux/bitops.h> #include <linux/platform_device.h> #include <linux/jiffies.h> -#include <linux/debugfs.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/pcm_params.h> @@ -68,17 +67,13 @@ static int dapm_status = 1; module_param(dapm_status, int, 0); MODULE_PARM_DESC(dapm_status, "enable DPM sysfs entries"); -static struct dentry *asoc_debugfs; - -static u32 pop_time; - -static void pop_wait(void) +static void pop_wait(u32 pop_time) { if (pop_time) schedule_timeout_uninterruptible(msecs_to_jiffies(pop_time)); } -static void pop_dbg(const char *fmt, ...) +static void pop_dbg(u32 pop_time, const char *fmt, ...) { va_list args; @@ -86,7 +81,7 @@ static void pop_dbg(const char *fmt, ...) if (pop_time) { vprintk(fmt, args); - pop_wait(); + pop_wait(pop_time); } va_end(args); @@ -231,10 +226,11 @@ static int dapm_update_bits(struct snd_soc_dapm_widget *widget) change = old != new; if (change) { - pop_dbg("pop test %s : %s in %d ms\n", widget->name, - widget->power ? "on" : "off", pop_time); + pop_dbg(codec->pop_time, "pop test %s : %s in %d ms\n", + widget->name, widget->power ? "on" : "off", + codec->pop_time); snd_soc_write(codec, widget->reg, new); - pop_wait(); + pop_wait(codec->pop_time); } pr_debug("reg %x old %x new %x change %d\n", widget->reg, old, new, change); @@ -822,23 +818,9 @@ static DEVICE_ATTR(dapm_widget, 0444, dapm_widget_show, NULL); int snd_soc_dapm_sys_add(struct device *dev) { - int ret = 0; - if (!dapm_status) return 0; - - ret = device_create_file(dev, &dev_attr_dapm_widget); - if (ret != 0) - return ret; - - asoc_debugfs = debugfs_create_dir("asoc", NULL); - if (!IS_ERR(asoc_debugfs)) - debugfs_create_u32("dapm_pop_time", 0744, asoc_debugfs, - &pop_time); - else - asoc_debugfs = NULL; - - return 0; + return device_create_file(dev, &dev_attr_dapm_widget); } static void snd_soc_dapm_sys_remove(struct device *dev) @@ -846,9 +828,6 @@ static void snd_soc_dapm_sys_remove(struct device *dev) if (dapm_status) { device_remove_file(dev, &dev_attr_dapm_widget); } - - if (asoc_debugfs) - debugfs_remove_recursive(asoc_debugfs); } /* free all dapm widgets and resources */ -- 1.5.4.3

2 1

[alsa-devel] [PATCH] Fix pxa2xx-ac97-lib.c compilation
by Marc Zyngier 14 Oct '08

14 Oct '08

[This patch was posted to linux-arm-kernel ML yesterday, and reposted here in the hope that it will be merged soon] The last ALSA merge broke pxa2xx-ac97-lib.c, as it brought back references to cpu_is_pxa21x that Eric Miao removed in commit 0ffcbfd54ea81ca24c0749f55ca4fcf3e2bdc23e: [ARM] pxa: make cpu_is_pxa2* macros more consistent This patch gets rid of those references, and only keeps cpu_is_pxa25x(). Signed-off-by: Marc Zyngier <maz(a)misterjones.org> Acked-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> Acked-by: Eric Miao <eric.miao(a)marvell.com> diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c index 99026df..34c1d94 100644 --- a/sound/arm/pxa2xx-ac97-lib.c +++ b/sound/arm/pxa2xx-ac97-lib.c @@ -50,7 +50,7 @@ unsigned short pxa2xx_ac97_read(struct snd_ac97 *ac97, unsigned short reg) mutex_lock(&car_mutex); /* set up primary or secondary codec space */ - if ((cpu_is_pxa21x() || cpu_is_pxa25x()) && reg == AC97_GPIO_STATUS) + if (cpu_is_pxa25x() && reg == AC97_GPIO_STATUS) reg_addr = ac97->num ? &SMC_REG_BASE : &PMC_REG_BASE; else reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE; @@ -90,7 +90,7 @@ void pxa2xx_ac97_write(struct snd_ac97 *ac97, unsigned short reg, mutex_lock(&car_mutex); /* set up primary or secondary codec space */ - if ((cpu_is_pxa21x() || cpu_is_pxa25x()) && reg == AC97_GPIO_STATUS) + if (cpu_is_pxa25x() && reg == AC97_GPIO_STATUS) reg_addr = ac97->num ? &SMC_REG_BASE : &PMC_REG_BASE; else reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE; @@ -200,7 +200,7 @@ static inline void pxa_ac97_cold_pxa3xx(void) bool pxa2xx_ac97_try_warm_reset(struct snd_ac97 *ac97) { #ifdef CONFIG_PXA25x - if (cpu_is_pxa21x() || cpu_is_pxa25x()) + if (cpu_is_pxa25x()) pxa_ac97_warm_pxa25x(); else #endif @@ -230,7 +230,7 @@ EXPORT_SYMBOL_GPL(pxa2xx_ac97_try_warm_reset); bool pxa2xx_ac97_try_cold_reset(struct snd_ac97 *ac97) { #ifdef CONFIG_PXA25x - if (cpu_is_pxa21x() || cpu_is_pxa25x()) + if (cpu_is_pxa25x()) pxa_ac97_cold_pxa25x(); else #endif @@ -301,7 +301,7 @@ EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_suspend); int pxa2xx_ac97_hw_resume(void) { - if (cpu_is_pxa21x() || cpu_is_pxa25x() || cpu_is_pxa27x()) { + if (cpu_is_pxa25x() || cpu_is_pxa27x()) { pxa_gpio_mode(GPIO31_SYNC_AC97_MD); pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD); pxa_gpio_mode(GPIO28_BITCLK_AC97_MD); @@ -325,7 +325,7 @@ int __devinit pxa2xx_ac97_hw_probe(struct platform_device *dev) if (ret < 0) goto err; - if (cpu_is_pxa21x() || cpu_is_pxa25x() || cpu_is_pxa27x()) { + if (cpu_is_pxa25x() || cpu_is_pxa27x()) { pxa_gpio_mode(GPIO31_SYNC_AC97_MD); pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD); pxa_gpio_mode(GPIO28_BITCLK_AC97_MD); -- A rat a day keeps the plague away.

2 1

[alsa-devel] [PATCH 2.6.28] Fix pxa2xx-ac97-lib.c compilation
by Mark Brown 14 Oct '08

14 Oct '08

From: Marc Zyngier <maz(a)misterjones.org> The last ALSA merge broke pxa2xx-ac97-lib.c, as it brought back references to cpu_is_pxa21x that Eric Miao removed in commit 0ffcbfd54ea81ca24c0749f55ca4fcf3e2bdc23e: [ARM] pxa: make cpu_is_pxa2* macros more consistent This patch gets rid of those references, and only keeps cpu_is_pxa25x(). Signed-off-by: Marc Zyngier <maz(a)misterjones.org> Acked-by: Eric Miao <eric.miao(a)marvell.com> Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- Please merge into 2.6.28 - this breaks the build on PXA platforms. sound/arm/pxa2xx-ac97-lib.c | 12 ++++++------ 1 files changed, 6 insertions(+), 6 deletions(-) diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c index 99026df..34c1d94 100644 --- a/sound/arm/pxa2xx-ac97-lib.c +++ b/sound/arm/pxa2xx-ac97-lib.c @@ -50,7 +50,7 @@ unsigned short pxa2xx_ac97_read(struct snd_ac97 *ac97, unsigned short reg) mutex_lock(&car_mutex); /* set up primary or secondary codec space */ - if ((cpu_is_pxa21x() || cpu_is_pxa25x()) && reg == AC97_GPIO_STATUS) + if (cpu_is_pxa25x() && reg == AC97_GPIO_STATUS) reg_addr = ac97->num ? &SMC_REG_BASE : &PMC_REG_BASE; else reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE; @@ -90,7 +90,7 @@ void pxa2xx_ac97_write(struct snd_ac97 *ac97, unsigned short reg, mutex_lock(&car_mutex); /* set up primary or secondary codec space */ - if ((cpu_is_pxa21x() || cpu_is_pxa25x()) && reg == AC97_GPIO_STATUS) + if (cpu_is_pxa25x() && reg == AC97_GPIO_STATUS) reg_addr = ac97->num ? &SMC_REG_BASE : &PMC_REG_BASE; else reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE; @@ -200,7 +200,7 @@ static inline void pxa_ac97_cold_pxa3xx(void) bool pxa2xx_ac97_try_warm_reset(struct snd_ac97 *ac97) { #ifdef CONFIG_PXA25x - if (cpu_is_pxa21x() || cpu_is_pxa25x()) + if (cpu_is_pxa25x()) pxa_ac97_warm_pxa25x(); else #endif @@ -230,7 +230,7 @@ EXPORT_SYMBOL_GPL(pxa2xx_ac97_try_warm_reset); bool pxa2xx_ac97_try_cold_reset(struct snd_ac97 *ac97) { #ifdef CONFIG_PXA25x - if (cpu_is_pxa21x() || cpu_is_pxa25x()) + if (cpu_is_pxa25x()) pxa_ac97_cold_pxa25x(); else #endif @@ -301,7 +301,7 @@ EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_suspend); int pxa2xx_ac97_hw_resume(void) { - if (cpu_is_pxa21x() || cpu_is_pxa25x() || cpu_is_pxa27x()) { + if (cpu_is_pxa25x() || cpu_is_pxa27x()) { pxa_gpio_mode(GPIO31_SYNC_AC97_MD); pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD); pxa_gpio_mode(GPIO28_BITCLK_AC97_MD); @@ -325,7 +325,7 @@ int __devinit pxa2xx_ac97_hw_probe(struct platform_device *dev) if (ret < 0) goto err; - if (cpu_is_pxa21x() || cpu_is_pxa25x() || cpu_is_pxa27x()) { + if (cpu_is_pxa25x() || cpu_is_pxa27x()) { pxa_gpio_mode(GPIO31_SYNC_AC97_MD); pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD); pxa_gpio_mode(GPIO28_BITCLK_AC97_MD); -- 1.5.6.5

2 1

[alsa-devel] [PATCH] ASoC: Hide TLV320AIC26 configuration option for non-OpenFirwmare users
by Mark Brown 14 Oct '08

14 Oct '08

Since Kconfig ignores dependencies on select and other users should select SND_SOC_TLV320AIC26 we can add a dependency on the OpenFirmware helper to avoid exposing the menu entry to users who can't benefit from it. Thanks to Takashi for the suggestion. Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/Kconfig | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 4975d85..9242889 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -70,6 +70,9 @@ config SND_SOC_TLV320AIC23 config SND_SOC_TLV320AIC26 tristate "TI TLV320AIC26 Codec support" depends on SPI + # Note the Kconfig doesn't enforce dependencies - this just + # prevents non-OF users seeing the tristate in menus. + depends on SND_SOC_OF_SIMPLE config SND_SOC_TLV320AIC3X tristate -- 1.5.6.5

3 6

[alsa-devel] OMAP3EVM ASOC TWL4030 Audio drivers
by naveen krishna ch 14 Oct '08

14 Oct '08

Hi All, I am using OMAP3 EVM + TWL4030 combination. The ASOC drivers this combination seems to work half way. My problem is when i do a aplay ***.wav it plays fine but when i try to record through the line in with arecord -c 2 -r 8000 -f 8000 -d 10 -t wav record.wav command it does not record any thing. I have used the Gumstix Overo sources as a reference for making the Asoc sources for this combination. Can any one tell me how can i solve this issue. -- Thanks, keep smiling... keep winning... (: Naveen Krishna Ch :)

1 0

[alsa-devel] [PATCH] hda: fix nid variable warning
by Matthew Ranostay 14 Oct '08

14 Oct '08

Fixed compiler warning with possible uninitialized variable 'nid'. CC [M] /home/mranostay/git/alsa-driver/pci/hda/patch_sigmatel.o /home/mranostay/git/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c: In function ‘stac92xx_parse_auto_config’: /home/mranostay/git/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:2815: warning: ‘nid’ may be used uninitialized in this function Signed-off-by: Matthew Ranostay <mranostay(a)embeddedalley.com> --- diff --git a/pci/hda/patch_sigmatel.c b/pci/hda/patch_sigmatel.c index c461baa..f8bfb4c 100644 --- a/pci/hda/patch_sigmatel.c +++ b/pci/hda/patch_sigmatel.c @@ -2812,7 +2812,7 @@ static int stac92xx_auto_create_multi_out_ctls(struct hda_codec *codec, static const char *chname[4] = { "Front", "Surround", NULL /*CLFE*/, "Side" }; - hda_nid_t nid; + hda_nid_t nid = 0; int i, err; struct sigmatel_spec *spec = codec->spec;

2 1

[alsa-devel] [PATCH] ALSA: ASoC: Fix compile-time warning for tlv320aic23.c
by Arun KS 13 Oct '08

13 Oct '08

Fixes this warning: sound/soc/codecs/tlv320aic23.c: In function 'tlv320aic23_write': sound/soc/codecs/tlv320aic23.c:104: warning: passing argument 2 of 'codec->hw_write' makes pointer from integer without a cast Replaces i2c smbus write function with standard i2c write function Signed-off-by: Arun KS <arunks(a)mistralsolutions.com> --- sound/soc/codecs/tlv320aic23.c | 10 +++++----- 1 files changed, 5 insertions(+), 5 deletions(-) diff --git a/sound/soc/codecs/tlv320aic23.c b/sound/soc/codecs/tlv320aic23.c index bac7815..44308da 100644 --- a/sound/soc/codecs/tlv320aic23.c +++ b/sound/soc/codecs/tlv320aic23.c @@ -84,7 +84,7 @@ static int tlv320aic23_write(struct snd_soc_codec *codec, unsigned int reg, unsigned int value) { - u8 data; + u8 data[2]; /* TLV320AIC23 has 7 bit address and 9 bits of data * so we need to switch one data bit into reg and rest @@ -96,12 +96,12 @@ static int tlv320aic23_write(struct snd_soc_codec *codec, unsigned int reg, return -1; } - data = (reg << 1) | (value >> 8 & 0x01); + data[0] = (reg << 1) | (value >> 8 & 0x01); + data[1] = value & 0xff; tlv320aic23_write_reg_cache(codec, reg, value); - if (codec->hw_write(codec->control_data, data, - (value & 0xff)) == 0) + if (codec->hw_write(codec->control_data, data, 2) == 2) return 0; printk(KERN_ERR "%s cannot write %03x to register R%d\n", __func__, @@ -674,7 +674,7 @@ static int tlv320aic23_probe(struct platform_device *pdev) tlv320aic23_socdev = socdev; #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) - codec->hw_write = (hw_write_t) i2c_smbus_write_byte_data; + codec->hw_write = (hw_write_t) i2c_master_send; codec->hw_read = NULL; ret = i2c_add_driver(&tlv320aic23_i2c_driver); if (ret != 0) -- 1.5.3.4

3 2

[alsa-devel] ASUS V1Sn can have digout
by asto 13 Oct '08

13 Oct '08

Regarding this change: http://git.alsa-project.org/?p=alsa-kernel.git;a=commit;h=2522d7359301efadf… (Added support for Asus V1Sn) This card can have digital output, and indeed does in my situation. The patch above added to patch_realtek.c: SND_PCI_QUIRK(0x1043, 0x1633, "Asus V1Sn", ALC861VD_LENOVO) However, ALC861VD_LENOVO definition has no digout Is it possible to have digital out for this device configured in auto-probe rather than map to lenovo ? For now, I add a definition for it based on the lenovo and 3stack-660-digout: to patch_realtek.c [ALC660VD_V1S] = { .mixers = { alc861vd_3st_mixer }, .init_verbs = { alc861vd_volume_init_verbs, alc861vd_3stack_init_verbs, alc861vd_eapd_verbs, alc861vd_lenovo_unsol_verbs }, .num_dacs = ARRAY_SIZE(alc660vd_dac_nids), .dac_nids = alc660vd_dac_nids, .dig_out_nid = ALC861VD_DIGOUT_NID, .num_channel_mode = ARRAY_SIZE(alc861vd_3stack_2ch_modes), .channel_mode = alc861vd_3stack_2ch_modes, .input_mux = &alc861vd_capture_source, .unsol_event = alc861vd_lenovo_unsol_event, .init_hook = alc861vd_lenovo_automute, },

2 1