- Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH] hda: STAC_DELL_M6 EAPD
by Matthew Ranostay 17 Nov '08

17 Nov '08

Add support for EAPD on system suspend and disabling EAPD on headphone jack detection for STAC_DELL_M6 laptops. Signed-off-by: Matthew Ranostay <mranostay(a)embeddedalley.com> --- diff --git a/pci/hda/patch_sigmatel.c b/pci/hda/patch_sigmatel.c index ec8f5ab..e0298df 100644 --- a/pci/hda/patch_sigmatel.c +++ b/pci/hda/patch_sigmatel.c @@ -147,6 +147,7 @@ struct sigmatel_spec { unsigned int num_mixers; int board_config; + unsigned int eapd_switch: 1; unsigned int surr_switch: 1; unsigned int line_switch: 1; unsigned int mic_switch: 1; @@ -3944,7 +3945,7 @@ static void stac92xx_hp_detect(struct hda_codec *codec, unsigned int res) for (i = 0; i < cfg->speaker_outs; i++) stac92xx_reset_pinctl(codec, cfg->speaker_pins[i], AC_PINCTL_OUT_EN); - if (spec->eapd_mask) + if (spec->eapd_mask && spec->eapd_switch) stac_gpio_set(codec, spec->gpio_mask, spec->gpio_dir, spec->gpio_data & ~spec->eapd_mask); @@ -3959,7 +3960,7 @@ static void stac92xx_hp_detect(struct hda_codec *codec, unsigned int res) for (i = 0; i < cfg->speaker_outs; i++) stac92xx_set_pinctl(codec, cfg->speaker_pins[i], AC_PINCTL_OUT_EN); - if (spec->eapd_mask) + if (spec->eapd_mask && spec->eapd_switch) stac_gpio_set(codec, spec->gpio_mask, spec->gpio_dir, spec->gpio_data | spec->eapd_mask); @@ -4319,6 +4320,7 @@ again: spec->num_smuxes = 0; spec->mixer = &stac92hd73xx_6ch_mixer[DELL_M6_MIXER]; spec->amp_nids = &stac92hd73xx_amp_nids[DELL_M6_AMP]; + spec->eapd_switch = 0; spec->num_amps = 1; if (!spec->init) @@ -4350,6 +4352,7 @@ again: default: spec->num_dmics = STAC92HD73XX_NUM_DMICS; spec->num_smuxes = ARRAY_SIZE(stac92hd73xx_smux_nids); + spec->eapd_switch = 1; } if (spec->board_config > STAC_92HD73XX_REF) { /* GPIO0 High = Enable EAPD */ @@ -4495,7 +4498,13 @@ static int stac92hd71xx_resume(struct hda_codec *codec) static int stac92hd71xx_suspend(struct hda_codec *codec, pm_message_t state) { + struct sigmatel_spec *spec = codec->spec; + stac92hd71xx_set_power_state(codec, AC_PWRST_D3); + if (spec->eapd_mask) + stac_gpio_set(codec, spec->gpio_mask, + spec->gpio_dir, spec->gpio_data & + ~spec->eapd_mask); return 0; }; @@ -4885,6 +4894,7 @@ static int patch_stac927x(struct hda_codec *codec) spec->num_pwrs = 0; spec->aloopback_mask = 0x40; spec->aloopback_shift = 0; + spec->eapd_switch = 1; err = stac92xx_parse_auto_config(codec, 0x1e, 0x20); if (!err) { @@ -4965,6 +4975,7 @@ static int patch_stac9205(struct hda_codec *codec) spec->aloopback_mask = 0x40; spec->aloopback_shift = 0; + spec->eapd_switch = 1; spec->multiout.dac_nids = spec->dac_nids; switch (spec->board_config){

2 1

Re: [alsa-devel] digital audio on ASUS P5QL-EM motherboard
by Andrei Tanas 17 Nov '08

17 Nov '08

> It seems that there are two problems: > - the SPDIF output PID for you board is 0x10 instead of 0x06 You are right about this, it works with the patch you provided, with one caveat: ALC1200 uses ALC883 patch, so instead of changing ALC882_DIGOUT_NID, I changed ALC883_DIGOUT_NID. How did you find out that it's 0x10 instead of 0x06? Has documentation on ALC1200 become available? > - codec#1 is not probed properly I was responsible for the confusion with the missing codec. I set probe_mask=1 parameter (as suggested in some forum as a troubleshooting option for ALC1200) without trying to understand what it does. The probing actually seems to work correctly. Model autodetection: lspci -nn -vvv shows: 00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e] Subsystem: ASUSTeK Computer Inc. Device [1043:82fe] So this SND_PCI_QUIRK fixes it (except that it's currently relying on the temporary hack) --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -8206,6 +8206,7 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = { SND_PCI_QUIRK(0x103c, 0x2a4f, "HP Samba", ALC888_3ST_HP), SND_PCI_QUIRK(0x103c, 0x2a60, "HP Lucknow", ALC888_3ST_HP), SND_PCI_QUIRK(0x103c, 0x2a61, "HP Nettle", ALC883_6ST_DIG), + SND_PCI_QUIRK(0x1043, 0x82fe, "Asus P5Q", ALC883_6ST_DIG), SND_PCI_QUIRK(0x1043, 0x1873, "Asus M90V", ALC888_ASUS_M90V), SND_PCI_QUIRK(0x1043, 0x8249, "Asus M2A-VM HDMI", ALC883_3ST_6ch_DIG), SND_PCI_QUIRK(0x1043, 0x835f, "Asus Eee 1601", ALC888_ASUS_EEE1601), Thank you. ---------------------- aplay -l ---------------------- **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC1200 Analog [ALC1200 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC1200 Digital [ALC1200 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 3: INTEL HDMI [INTEL HDMI] Subdevices: 1/1 Subdevice #0: subdevice #0 ---------------------- aplay -L (with model=6stack-dig) ---------------------- front:CARD=Intel,DEV=0 HDA Intel, ALC1200 Analog Front speakers surround40:CARD=Intel,DEV=0 HDA Intel, ALC1200 Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=Intel,DEV=0 HDA Intel, ALC1200 Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Intel,DEV=0 HDA Intel, ALC1200 Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Intel,DEV=0 HDA Intel, ALC1200 Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Intel,DEV=0 HDA Intel, ALC1200 Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=Intel,DEV=0 HDA Intel, ALC1200 Digital IEC958 (S/PDIF) Digital Audio Output null Discard all samples (playback) or generate zero samples (capture) ---------------------- aplay -L (default options) ---------------------- front:CARD=Intel,DEV=0 HDA Intel, ALC1200 Analog Front speakers surround40:CARD=Intel,DEV=0 HDA Intel, ALC1200 Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=Intel,DEV=0 HDA Intel, ALC1200 Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Intel,DEV=0 HDA Intel, ALC1200 Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Intel,DEV=0 HDA Intel, ALC1200 Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Intel,DEV=0 HDA Intel, ALC1200 Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers null Discard all samples (playback) or generate zero samples (capture) ---------------------- dmesg (with model=6stack-dig ) ---------------------- [ 8.442560] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 8.442686] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 8.442690] ALSA sound/pci/hda/hda_intel.c:2196: chipset global capabilities = 0x4401 [ 8.466673] ALSA sound/pci/hda/hda_intel.c:779: codec_mask = 0x3 [ 8.466753] ALSA sound/pci/hda/hda_intel.c:1256: max_slots = 4, codec_mask = 3, codec_probe_mask = -1 [ 8.466889] ALSA sound/pci/hda/hda_intel.c:1206: hda_intel: codec #0 probed OK [ 8.467018] ALSA sound/pci/hda/hda_intel.c:1206: hda_intel: codec #1 probed OK [ 8.490429] usb 3-1: reset full speed USB device using uhci_hcd and address 2 [ 8.637617] lirc_dev: lirc_register_plugin: sample_rate: 0 [ 8.641615] lirc_mceusb2[2]: Philips eHome Infrared Transceiver on usb3:2 [ 8.641689] usbcore: registered new interface driver lirc_mceusb2 [ 9.470007] ALSA sound/pci/hda/hda_intel.c:627: hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x200f0000 [ 10.473336] ALSA sound/pci/hda/hda_intel.c:1271: hda_intel: Codec #2 probe error; disabling it... [ 11.503338] ALSA sound/pci/hda/hda_intel.c:1271: hda_intel: Codec #3 probe error; disabling it... [ 11.531911] ALSA sound/pci/hda/hda_codec.c:2587: hda_codec: model '6stack-dig' is selected [ 11.558144] ALSA sound/pci/hda/hda_codec.c:1276: Cannot find slave Headphone Playback Volume, skipped [ 11.558237] ALSA sound/pci/hda/hda_codec.c:1276: Cannot find slave Speaker Playback Volume, skipped [ 11.558330] ALSA sound/pci/hda/hda_codec.c:1276: Cannot find slave Mono Playback Volume, skipped [ 11.558422] ALSA sound/pci/hda/hda_codec.c:1276: Cannot find slave Line-Out Playback Volume, skipped [ 11.558514] ALSA sound/pci/hda/hda_codec.c:1276: Cannot find slave PCM Playback Volume, skipped [ 11.558610] ALSA sound/pci/hda/hda_codec.c:1276: Cannot find slave Speaker Playback Switch, skipped [ 11.558702] ALSA sound/pci/hda/hda_codec.c:1276: Cannot find slave Mono Playback Switch, skipped ************** playback on ************** [ 159.960545] ALSA sound/pci/hda/hda_intel.c:1473: azx_pcm_prepare: bufsize=0x10000, format=0x11 [ 159.960567] ALSA sound/pci/hda/hda_codec.c:841: hda_codec_setup_stream: NID=0x10, stream=0x5, channel=0, format=0x11 [ 161.613092] ALSA sound/pci/hda/hda_codec.c:853: hda_codec_cleanup_stream: NID=0x10 [ 161.613168] ALSA sound/pci/hda/hda_codec.c:853: hda_codec_cleanup_stream: NID=0x10 ************** playback off ************** ---------------------- dmesg (no parameters) ---------------------- [ 8.972060] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 8.972187] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 8.972191] ALSA sound/pci/hda/hda_intel.c:2196: chipset global capabilities = 0x4401 [ 8.996673] ALSA sound/pci/hda/hda_intel.c:779: codec_mask = 0x3 [ 8.996754] ALSA sound/pci/hda/hda_intel.c:1256: max_slots = 4, codec_mask = 3, codec_probe_mask = -1 [ 8.996896] ALSA sound/pci/hda/hda_intel.c:1206: hda_intel: codec #0 probed OK [ 8.997016] ALSA sound/pci/hda/hda_intel.c:1206: hda_intel: codec #1 probed OK [ 10.000009] ALSA sound/pci/hda/hda_intel.c:627: hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x200f0000 [ 11.003343] ALSA sound/pci/hda/hda_intel.c:1271: hda_intel: Codec #2 probe error; disabling it... [ 12.033342] ALSA sound/pci/hda/hda_intel.c:1271: hda_intel: Codec #3 probe error; disabling it... [ 12.061914] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 12.062480] ALSA sound/pci/hda/hda_codec.c:3303: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) [ 12.062482] ALSA sound/pci/hda/hda_codec.c:3307: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 12.062484] ALSA sound/pci/hda/hda_codec.c:3311: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 12.062485] ALSA sound/pci/hda/hda_codec.c:3312: mono: mono_out=0x0 [ 12.062487] ALSA sound/pci/hda/hda_codec.c:3320: inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x0 [ 12.092487] ALSA sound/pci/hda/hda_codec.c:1276: Cannot find slave Headphone Playback Volume, skipped [ 12.092581] ALSA sound/pci/hda/hda_codec.c:1276: Cannot find slave Speaker Playback Volume, skipped [ 12.092673] ALSA sound/pci/hda/hda_codec.c:1276: Cannot find slave Mono Playback Volume, skipped [ 12.092764] ALSA sound/pci/hda/hda_codec.c:1276: Cannot find slave Line-Out Playback Volume, skipped [ 12.092856] ALSA sound/pci/hda/hda_codec.c:1276: Cannot find slave PCM Playback Volume, skipped [ 12.092953] ALSA sound/pci/hda/hda_codec.c:1276: Cannot find slave Speaker Playback Switch, skipped [ 12.093043] ALSA sound/pci/hda/hda_codec.c:1276: Cannot find slave Mono Playback Switch, skipped

4 5

[alsa-devel] (no subject)
by Yang, Libin 17 Nov '08

17 Nov '08

Hi Takashi, This patch is to support detecting new AMD HD Audio devices with HDA PCI class code. Would you please review it? Thanks a lot! -------------------------------------------------------------------- Signed-off-by: Libin Yang <libin.yang(a)amd.com> --- alsa-driver-1.0.18.orig/alsa-kernel/pci/hda/hda_intel.c 2008-10-29 20:41:35.000000000 +0800 +++ alsa-driver-1.0.18/alsa-kernel/pci/hda/hda_intel.c 2008-11-11 18:33:14.000000000 +0800 @@ -291,6 +291,7 @@ /* Define VIA HD Audio Device ID*/ #define VIA_HDAC_DEVICE_ID 0x3288 +#define PCI_CLASS_MULTIMEDIA_HDA 0x040300 /* */ @@ -410,6 +411,7 @@ AZX_DRIVER_ULI, AZX_DRIVER_NVIDIA, AZX_DRIVER_TERA, + AZX_DRIVER_AMD_AUTO, AZX_NUM_DRIVERS, /* keep this as last entry */ }; @@ -423,6 +425,7 @@ [AZX_DRIVER_ULI] = "HDA ULI M5461", [AZX_DRIVER_NVIDIA] = "HDA NVidia", [AZX_DRIVER_TERA] = "HDA Teradici", + [AZX_DRIVER_AMD_AUTO] = "HDA AMD", }; /* @@ -1198,6 +1201,7 @@ static unsigned int azx_default_codecs[AZX_NUM_DRIVERS] __devinitdata = { [AZX_DRIVER_ICH] = 3, [AZX_DRIVER_ATI] = 3, + [AZX_DRIVER_AMD_AUTO] = 3, }; static int __devinit azx_codec_create(struct azx *chip, const char *model, @@ -2146,6 +2150,7 @@ chip->playback_streams = ULI_NUM_PLAYBACK; chip->capture_streams = ULI_NUM_CAPTURE; break; + case AZX_DRIVER_AMD_AUTO: case AZX_DRIVER_ATIHDMI: chip->playback_streams = ATIHDMI_NUM_PLAYBACK; chip->capture_streams = ATIHDMI_NUM_CAPTURE; @@ -2373,6 +2378,9 @@ { PCI_DEVICE(0x10de, 0x0bd7), .driver_data = AZX_DRIVER_NVIDIA }, /* Teradici */ { PCI_DEVICE(0x6549, 0x1200), .driver_data = AZX_DRIVER_TERA }, + /* AMD Generic, PCI class code and Vendor ID for HD Audio */ + { PCI_VENDOR_ID_ATI, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_MULTIMEDIA_HDA, 0xffffff, AZX_DRIVER_AMD_AUTO }, { 0, } }; MODULE_DEVICE_TABLE(pci, azx_ids); Thanks & Regards, Libin

2 7

[alsa-devel] Chip: SigmaTel ID 7645
by Thomas Dietterle 16 Nov '08

16 Nov '08

Sehr geehrte Damen und Herren, ich habe ein Mainboard mit eingebauter Soundkarte. Leider bekomme ich keinen vernüftigen Sound zu hören, der Klang kratzt und verliert sich im Echo. head -n 1 /proc/asound/card0/codec* Codec: SigmaTel ID 7645 hwinfo --sound 22: PCI 07.0: 0403 Audio device [Created at pci.301] UDI: /org/freedesktop/Hal/devices/pci_10de_774 Unique ID: M71A.I3CGe6sNjHC SysFS ID: /devices/pci0000:00/0000:00:07.0 SysFS BusID: 0000:00:07.0 Hardware Class: sound Model: "Elitegroup Audio device" Vendor: pci 0x10de "nVidia Corporation" Device: pci 0x0774 SubVendor: pci 0x1019 "Elitegroup Computer Systems" SubDevice: pci 0x2666 Revision: 0xa1 Driver: "HDA Intel" Driver Modules: "snd_hda_intel" Memory Range: 0xfce78000-0xfce7bfff (rw,non-prefetchable) IRQ: 20 (9832 events) Module Alias: "pci:v000010DEd00000774sv00001019sd00002666bc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=no, avail=yes, need=no, active=unknown lsmod| grep snd snd_pcm_oss 50432 0 snd_mixer_oss 20096 1 snd_pcm_oss snd_seq 54452 0 snd_seq_device 12172 1 snd_seq snd_hda_intel 273180 0 snd_pcm 82564 2 snd_pcm_oss,snd_hda_intel snd_timer 26756 2 snd_seq,snd_pcm snd 58164 7 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_pcm,snd_timer soundcore 11460 1 snd snd_page_alloc 14472 2 snd_hda_intel,snd_pcm || Suse 10.3 uname -a Linux linux-winxp 2.6.22.19-0.1-default #1 SMP 2008-10-14 22:17:43 +0200 i686 athlon i386 GNU/Linux Woran könnte es ihrer Meinung noch liegen?

1 0

[alsa-devel] Alsa driver won't compile on Ubuntu kernel 2.6.24-16-generic
by Klaus Schulz 16 Nov '08

16 Nov '08

Hi folks. As you know I am maintaining an Alsa-Installation script over at Ubuntu forums: http://ubuntuforums.org/showthread.php?t=962695 Admin: I intend to post problems over here if they're mentioned more than once, if you don't mind. I ask people to upload the Alsa log file. Perhaps you can give me hint how to set this process up properly. !These are not my problems. I just try to channel at least some of them. Here is the first problem: Alsa driver won't compile on Ubuntu kernel 2.6.24-16-generic make -C /lib/modules/2.6.24-16-generic/build SUBDIRS=/usr/src/Alsa-1.0.18a/alsa-driver-1.0.18a CPP="gcc -E" CC="gcc" modules make[1]: Entering directory `/usr/src/linux-headers-2.6.24-16-generic' CC [M] /usr/src/Alsa-1.0.18a/alsa-driver-1.0.18a/acore/hrtimer.o In file included from /usr/src/Alsa-1.0.18a/alsa-driver-1.0.18a/acore/hrtimer.c:2: /usr/src/Alsa-1.0.18a/alsa-driver-1.0.18a/acore/../alsa-kernel/core/hrtimer.c: In function âsnd_hrtimer_callbackâ: /usr/src/Alsa-1.0.18a/alsa-driver-1.0.18a/acore/../alsa-kernel/core/hrtimer.c:29: error: implicit declaration of function âhrtimer_forward_nowâ make[3]: *** [/usr/src/Alsa-1.0.18a/alsa-driver-1.0.18a/acore/hrtimer.o] Error 1 make[2]: *** [/usr/src/Alsa-1.0.18a/alsa-driver-1.0.18a/acore] Error 2 make[1]: *** [_module_/usr/src/Alsa-1.0.18a/alsa-driver-1.0.18a] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.24-16-generic' make: *** [compile] Error Any ideas? Cheers Klaus

1 0

[alsa-devel] ALC883 recording broken
by Dmitry Nezhevenko 16 Nov '08

16 Nov '08

Hi. I'm trying to get sound recording work on my MSI M673 laptop. Currently I'm running 2.6.27 kernel with in-kernel alsa. It looks like something going really wrong. I've connected headphones to laptop, unmuted mic and configured it's gain to maximum. After this I've tried to change "Mic boost" value. First of all, "Mic boost" under "Capture" view of alsamixer don't work at all (I can't hear any changes). "Mic boost" under "Playback" works (at least I can hear less noise with 0%, more noise with 33%, more with 67%. and, that's strange, but less with 100%. (100% looks like same as 33%). I've tried all model=xxx variants for my ALC883 codec but with no success. arecord just records silence. (Mic was unmuted and Mic boost is set to maximum). Also just after modprobing snd_hda_intel with model=acer-aspire some led in headphones jack lights.. I don't know what does this means. Ubuntu 7.10 with 2.6.22 kernel and alsa 1.0.14 works a bit different. Recording works with model=acer-aspire but playback is broken (just silence). It really looks like some codec misconfiguration (probably it tries to record from incorrect line or something like this). I've found one thread at LKML (http://lkml.org/lkml/2008/6/9/331) about this codec. And it refers to some hda-verb utility that should be able to adjust some codec settings. Is there any manual available? Or any other suggestions, what I should try to debug this? I'm attaching alsa-info.sh output -- WBR, Dmitry

1 0

Re: [alsa-devel] Fwd: Undelivered Mail Returned to Sender
by Andrei Tanas 15 Nov '08

15 Nov '08

>> >> And here's "cat /proc/asound/card0/codec#0" >> > >> > This is the regular codec. >> > Are there /proc/asound/card0/codec#{1,2,3}? >> >> There was only one. >> >> > The HDMI codec would look like this one: >> > % cat /proc/asound/card0/codec\#3 >> >> >> I saw nothing like that. >> Does your main board have an external physical HDMI interface? >> If true, then there is an ALSA bug. Yes, there's physical HDMI port on the card, which, according to the documentation, supports both video and audio. However, there's also "SPDIF OUT Mode Setting" in the BIOS allowing to choose between "HDMI Output" or "SPDIF Output", suggesting that only one can be used at a time. The description is not terribly clear though. >> Will it help to enable SND_VERBOSE_PRINTK and SND_DEBUG? > Sure it could help, and be sure to use the latest sound-2.6 git tree :-) Ok, I've done this. Here's "aplay -l" **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC1200 Analog [ALC1200 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC1200 Digital [ALC1200 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 And here's "dmesg" [ 8.513848] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 8.514001] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 8.514005] ALSA sound/pci/hda/hda_intel.c:2187: chipset global capabilities = 0x4401 [ 8.543345] ALSA sound/pci/hda/hda_intel.c:779: codec_mask = 0x3 [ 8.543487] ALSA sound/pci/hda/hda_intel.c:1206: hda_intel: codec #0 probed OK [ 8.545462] ALSA sound/pci/hda/hda_codec.c:2587: hda_codec: model '6stack-dig' is selected [ 8.574845] ALSA sound/pci/hda/hda_codec.c:1276: Cannot find slave Headphone Playback Volume, skipped [ 8.574947] ALSA sound/pci/hda/hda_codec.c:1276: Cannot find slave Speaker Playback Volume, skipped [ 8.575043] ALSA sound/pci/hda/hda_codec.c:1276: Cannot find slave Mono Playback Volume, skipped [ 8.575135] ALSA sound/pci/hda/hda_codec.c:1276: Cannot find slave Line-Out Playback Volume, skipped [ 8.575231] ALSA sound/pci/hda/hda_codec.c:1276: Cannot find slave PCM Playback Volume, skipped [ 8.575337] ALSA sound/pci/hda/hda_codec.c:1276: Cannot find slave Speaker Playback Switch, skipped [ 8.575435] ALSA sound/pci/hda/hda_codec.c:1276: Cannot find slave Mono Playback Switch, skipped [ 105.312682] ALSA sound/pci/hda/hda_codec.c:853: hda_codec_cleanup_stream: NID=0x6 [ 106.707933] ALSA sound/pci/hda/hda_intel.c:1464: azx_pcm_prepare: bufsize=0x10000, format=0x11 [ 106.707951] ALSA sound/pci/hda/hda_codec.c:841: hda_codec_setup_stream: NID=0x6, stream=0x5, channel=0, format=0x11 .......... [ 110.479724] ALSA sound/pci/hda/hda_intel.c:1464: azx_pcm_prepare: bufsize=0x10000, format=0x11 [ 110.479740] ALSA sound/pci/hda/hda_codec.c:841: hda_codec_setup_stream: NID=0x6, stream=0x5, channel=0, format=0x11 [ 200.715073] ALSA sound/pci/hda/hda_codec.c:853: hda_codec_cleanup_stream: NID=0x6

1 0

[alsa-devel] [PATCH] hda: STAC_VREF_EVENT value change
by Matthew Ranostay 15 Nov '08

15 Nov '08

Changed value for STAC_VREF_EVENT from 0x40 to 0x00 because the unsol response value is only 6-bits width and the former value was 1<<6 which is an overrun. Signed-off-by: Matthew Ranostay <mranostay(a)embeddedalley.com> --- diff --git a/pci/hda/patch_sigmatel.c b/pci/hda/patch_sigmatel.c index ec8f5ab..86e5cd9 100644 --- a/pci/hda/patch_sigmatel.c +++ b/pci/hda/patch_sigmatel.c @@ -36,10 +36,10 @@ #include "hda_patch.h" #include "hda_beep.h" +#define STAC_VREF_EVENT 0x00 #define STAC_INSERT_EVENT 0x10 #define STAC_PWR_EVENT 0x20 #define STAC_HP_EVENT 0x30 -#define STAC_VREF_EVENT 0x40 enum { STAC_REF,

2 1

[alsa-devel] xfi fatality pro gamer
by Dmitri Seletski 15 Nov '08

15 Nov '08

Hello boys and girls. I have a card (actually 3 of them, hda-intel, that doesn't work properly, usb-audio, that doesn't work properly and xfi fatality gamer pro, which you guessed by now doesn't work properly). I may test things from any of those cards if you have any interest. I know my fatality card is rather new on the market(not exactly, but...) and not very well supported. I would like to test it if you need more testers. I have got driver released on 6th of November 2008. I tryed OSS with it, it sucked badly, but at least proved that card is in working conditions. With this driver that creative released i am getting my sound applications failed miserably. I know it's crap, so instead of complaining I decided to do something about it this time. I can provide dmesg output. Anyway, let me know if you need a guinea pig(I know how to load a distro from live cd, worst case scenario, chrootig or something). Restecpa me brothers and sistas. Dmitri

2 1

[alsa-devel] [PATCH RESEND 0/3] ALSA SOC driver for s3c24xx with uda134x
by christian pellegrin 15 Nov '08

15 Nov '08

This patch adds support for the UDA134X codec and a sound card definition for one of these UDAs connected to the s3c24xx. It is *heavily* based on the one made by Zoltan Devai but: 1 since the UDA is the only use of the L3 protocol I can find I just embedded a stripped-down L3 bit-banging algorithm from the original RMK work. It is really small. 2 the driver has the possibility to specify the pins used by codec via platform data so it can work on SMDK2410, SMDK2440 or any custom design. 3 it tries to guess the right clock source and divider so it is not tied to a particular crystal used. 4 it fixes some bugs. -- Christian Pellegrin, see http://www.evolware.org/chri/ "Real Programmers don't play tennis, or any other sport which requires you to change clothes. Mountain climbing is OK, and Real Programmers wear their climbing boots to work in case a mountain should suddenly spring up in the middle of the computer room."

1 0