April 2025 - Alsa-devel - mailman.alsa-project.org

Audio doesn't work on acp3xalc5682m98357 since 1.2.14
by GitHub issues - opened 22 Apr '25

22 Apr '25

alsa-project/alsa-ucm-conf issue #550 was opened from meithecatte: Since 1.2.14, pipewire doesn't detect the audio device, and trying to use `aplay` results in ``` ALSA lib pcm_dmix.c:1000:(snd_pcm_dmix_open) unable to open slave aplay: main:850: audio open error: No such file or directory ``` `aplay -l` lists ``` card 1: acp3xalc5682m98 [acp3xalc5682m98357], device 0: Playback rt5682-aif1-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: acp3xalc5682m98 [acp3xalc5682m98357], device 1: HiFi Playback HiFi-1 [] Subdevices: 1/1 Subdevice #0: subdevice #0 ``` `git bisect` says 0a87bd36b77e4e22397450d7ba3f9d36ce9eb5e0 is the first bad commit. Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/550 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH v1] ASoC: tas2781: Add "Acoustic Tuning" kcontrol for acoustic application
by Shenghao Ding 21 Apr '25

21 Apr '25

"Acoustic Tuning" kcontrol is a bridge to the acoustic tuning application tool which can tune the chips' acoustic effect. Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- include/sound/tas2781.h | 13 ++++ sound/soc/codecs/tas2781-i2c.c | 138 ++++++++++++++++++++++++++++++++- 2 files changed, 149 insertions(+), 2 deletions(-) diff --git a/include/sound/tas2781.h b/include/sound/tas2781.h index eff011444cc8..a9c236ab8cba 100644 --- a/include/sound/tas2781.h +++ b/include/sound/tas2781.h @@ -32,6 +32,8 @@ SNDRV_PCM_FMTBIT_S24_LE | \ SNDRV_PCM_FMTBIT_S32_LE) +#define TASDEV_DATA_PAYLOAD_SIZE 128 + /* PAGE Control Register (available in page0 of each book) */ #define TASDEVICE_PAGE_SELECT 0x00 #define TASDEVICE_BOOKCTL_PAGE 0x00 @@ -159,10 +161,21 @@ struct calidata { unsigned int cali_dat_sz_per_dev; }; +struct acoustic_data { + unsigned char len; + unsigned char id; + unsigned char addr; + unsigned char book; + unsigned char page; + unsigned char reg; + unsigned char data[TASDEV_DATA_PAYLOAD_SIZE]; +}; + struct tasdevice_priv { struct tasdevice tasdevice[TASDEVICE_MAX_CHANNELS]; struct tasdevice_rca rcabin; struct calidata cali_data; + struct acoustic_data acou_data; struct tasdevice_fw *fmw; struct gpio_desc *speaker_id; struct gpio_desc *reset; diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c index b950914b7d48..0d52cfc12743 100644 --- a/sound/soc/codecs/tas2781-i2c.c +++ b/sound/soc/codecs/tas2781-i2c.c @@ -328,6 +328,24 @@ static int tasdev_cali_data_get(struct snd_kcontrol *kcontrol, return 0; } +static int tasdev_acoustic_data_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *priv = snd_soc_component_get_drvdata(comp); + struct soc_bytes_ext *bytes_ext = + (struct soc_bytes_ext *) kcontrol->private_value; + unsigned char *dst = ucontrol->value.bytes.data; + struct acoustic_data *p = &priv->acou_data; + + if (p->id == 'r' && p->len <= bytes_ext->max) + memcpy(dst, p, p->len); + else + dev_err(priv->dev, "Not ready for get.\n"); + + return 0; +} + static int calib_data_get(struct tasdevice_priv *tas_priv, int reg, unsigned char *dst) { @@ -700,6 +718,84 @@ static int tasdev_tf_data_get(struct snd_kcontrol *kcontrol, return calib_data_get(tas_priv, reg, &dst[1]); } +static int tasdev_acoustic_data_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *priv = snd_soc_component_get_drvdata(comp); + struct soc_bytes_ext *bytes_ext = + (struct soc_bytes_ext *) kcontrol->private_value; + unsigned char *src = ucontrol->value.bytes.data; + int j, len, ret, value, reg; + unsigned short chn; + + if (src[0] > bytes_ext->max) { + dev_err(priv->dev, "pkg len(%u) is larger than max(%d).\n", + src[0], bytes_ext->max); + return 0; + } + + switch (src[1]) { + case 'r': + /* length of data to read */ + len = src[6]; + break; + case 'w': + /* Skip 6 bytes for package type and register address */ + len = src[0] - 6; + break; + default: + dev_err(priv->dev, "%s Wrong code %02x.\n", __func__, src[1]); + return 0; + } + + if (len < 1) { + dev_err(priv->dev, "pkg fmt invalid %02x.\n", len); + return 0; + } + + for (j = 0; j < priv->ndev; j++) + if (src[2] == priv->tasdevice[j].dev_addr) { + chn = j; + break; + } + if (j >= priv->ndev) { + dev_err(priv->dev, "no such device 0x%02x.\n", src[2]); + return 0; + } + + reg = TASDEVICE_REG(src[3], src[4], src[5]); + + guard(mutex)(&priv->codec_lock); + + if (src[1] == 'w') { + if (len > 1) + ret = tasdevice_dev_bulk_write(priv, chn, reg, + &src[6], len); + else + ret = tasdevice_dev_write(priv, chn, reg, src[6]); + } else { + struct acoustic_data *p = &priv->acou_data; + + memcpy(p, src, 6); + if (len > 1) { + ret = tasdevice_dev_bulk_read(priv, chn, reg, + p->data, len); + } else { + ret = tasdevice_dev_read(priv, chn, reg, &value); + p->data[0] = value; + } + p->len = len + 6; + } + + if (ret) { + dev_err(priv->dev, "i2c communication error.\n"); + return 0; + } + + return 1; +} + static int tasdev_re_data_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { @@ -1043,10 +1139,11 @@ static int tasdevice_get_chip_id(struct snd_kcontrol *kcontrol, static int tasdevice_create_control(struct tasdevice_priv *tas_priv) { struct snd_kcontrol_new *prof_ctrls; - int nr_controls = 1; + struct soc_bytes_ext *ext_acoustic; + char *acoustic_name, *name; + int nr_controls = 2; int mix_index = 0; int ret; - char *name; prof_ctrls = devm_kcalloc(tas_priv->dev, nr_controls, sizeof(prof_ctrls[0]), GFP_KERNEL); @@ -1068,6 +1165,43 @@ static int tasdevice_create_control(struct tasdevice_priv *tas_priv) prof_ctrls[mix_index].put = tasdevice_set_profile_id; mix_index++; + ext_acoustic = devm_kzalloc(tas_priv->dev, sizeof(*ext_acoustic), + GFP_KERNEL); + if (!ext_acoustic) + return -ENOMEM; + + /* + * This kcontrol is a bridge to the acoustic tuning application + * tool which can tune the chips' acoustic effect. + */ + acoustic_name = devm_kstrdup(tas_priv->dev, "Acoustic Tuning", + GFP_KERNEL); + if (!acoustic_name) + return -ENOMEM; + /* + * package structure for PPC3 communications: + * Pkg len (1 byte) + * Pkg id (1 byte, 'r' or 'w') + * Dev id (1 byte, i2c address) + * Book id (1 byte) + * Page id (1 byte) + * Reg id (1 byte) + * switch (pkg id) { + * case 'w': + * 1 byte, length of data to read + * case 'r': + * data payload (1~128 bytes) + * } + */ + ext_acoustic->max = sizeof(tas_priv->acou_data); + prof_ctrls[mix_index].name = acoustic_name; + prof_ctrls[mix_index].iface = SNDRV_CTL_ELEM_IFACE_MIXER; + prof_ctrls[mix_index].info = snd_soc_bytes_info_ext; + prof_ctrls[mix_index].put = tasdev_acoustic_data_put; + prof_ctrls[mix_index].get = tasdev_acoustic_data_get; + prof_ctrls[mix_index].private_value = (unsigned long)ext_acoustic; + mix_index++; + ret = snd_soc_add_component_controls(tas_priv->codec, prof_ctrls, nr_controls < mix_index ? nr_controls : mix_index); -- 2.34.1

3 5

Speaker can't mute when headphone was plugged
by Kailang 20 Apr '25

20 Apr '25

Hi Takashi, Speaker can't mute when headphone was plugged for HP platform. Add attach patch will solve issue. BR, Kailang

2 1

ucm2: MediaTek: mt8395-evk: Add support for SOF
by GitHub pull_request - opened 17 Apr '25

17 Apr '25

alsa-project/alsa-ucm-conf pull request #549 was opened from julien-massot: Similar to #513, add support for MT8395 with SOF enabled. We use different playback and capture PCM. Also, split the mixers that are not yet available upstream. Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/549 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/549.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

No audio on Lenovo Yoga Slim 7 14ILL10
by GitHub issues - edited 16 Apr '25

16 Apr '25

alsa-project/alsa-ucm-conf issue #548 was edited from miguel1117: Only "Dummy Output" is available as an output device on the Lenovo Yoga Slim 7 14ILL10. I'm not absolutely sure if this is the right place to report this so apologies if it's not. [ALSA information](https://alsa-project.org/db/?f=71342ec47d52681c81335d75d2947d8… Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/548 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

No audio on Lenovo Yoga Slim 7 14ILL10
by GitHub issues - edited 16 Apr '25

16 Apr '25

alsa-project/alsa-ucm-conf issue #548 was edited from miguel1117: Only "Dummy Output" is available as an output device on the Lenovo Yoga Slim 7 14ILL1. I'm not absolutely sure if this is the right place to report this so apologies if it's not. [ALSA information](https://alsa-project.org/db/?f=71342ec47d52681c81335d75d2947d8… Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/548 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH v3] ALSA: hda/tas2781: Create a common header for both spi and i2c tas2781 hda driver
by Shenghao Ding 16 Apr '25

16 Apr '25

Move the common macro definition of kcontrols into a common header for code cleanup, and create a common header to store the common declaration for both spi and i2c hda driver. Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- v3: - Add the purpose of this patch. v2: - Follow IWYU principle, add sound/asound.h into the header file. v1: - Revise the year of spi and i2c tas2781 hda drivers. - Create a common header for both spi and i2c tas2781 hda driver to define the common macros and declare the common functions. --- sound/pci/hda/tas2781_hda.h | 44 +++++++++++++++++++++++++++++++++ sound/pci/hda/tas2781_hda_i2c.c | 29 ++-------------------- sound/pci/hda/tas2781_hda_spi.c | 35 ++------------------------ 3 files changed, 48 insertions(+), 60 deletions(-) create mode 100644 sound/pci/hda/tas2781_hda.h diff --git a/sound/pci/hda/tas2781_hda.h b/sound/pci/hda/tas2781_hda.h new file mode 100644 index 000000000000..fc741fac419a --- /dev/null +++ b/sound/pci/hda/tas2781_hda.h @@ -0,0 +1,44 @@ +/* SPDX-License-Identifier: GPL-2.0-only + * + * HDA audio driver for Texas Instruments TAS2781 smart amp + * + * Copyright (C) 2025 Texas Instruments, Inc. + */ +#ifndef __TAS2781_HDA_H__ +#define __TAS2781_HDA_H__ + +#include <sound/asound.h> + +/* + * No standard control callbacks for SNDRV_CTL_ELEM_IFACE_CARD + * Define two controls, one is Volume control callbacks, the other is + * flag setting control callbacks. + */ + +/* Volume control callbacks for tas2781 */ +#define ACARD_SINGLE_RANGE_EXT_TLV(xname, xreg, xshift, xmin, xmax, xinvert, \ + xhandler_get, xhandler_put, tlv_array) { \ + .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = (xname), \ + .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \ + SNDRV_CTL_ELEM_ACCESS_READWRITE, \ + .tlv.p = (tlv_array), \ + .info = snd_soc_info_volsw, \ + .get = xhandler_get, .put = xhandler_put, \ + .private_value = (unsigned long)&(struct soc_mixer_control) { \ + .reg = xreg, .rreg = xreg, \ + .shift = xshift, .rshift = xshift,\ + .min = xmin, .max = xmax, .invert = xinvert, \ + } \ +} + +/* Flag control callbacks for tas2781 */ +#define ACARD_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) { \ + .iface = SNDRV_CTL_ELEM_IFACE_CARD, \ + .name = xname, \ + .info = snd_ctl_boolean_mono_info, \ + .get = xhandler_get, \ + .put = xhandler_put, \ + .private_value = xdata, \ +} + +#endif diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c index 29dc4f500580..9d94ae5fcfe0 100644 --- a/sound/pci/hda/tas2781_hda_i2c.c +++ b/sound/pci/hda/tas2781_hda_i2c.c @@ -2,7 +2,7 @@ // // TAS2781 HDA I2C driver // -// Copyright 2023 - 2024 Texas Instruments, Inc. +// Copyright 2023 - 2025 Texas Instruments, Inc. // // Author: Shenghao Ding <shenghao-ding(a)ti.com> // Current maintainer: Baojun Xu <baojun.xu(a)ti.com> @@ -30,35 +30,10 @@ #include "hda_component.h" #include "hda_jack.h" #include "hda_generic.h" +#include "tas2781_hda.h" #define TASDEVICE_SPEAKER_CALIBRATION_SIZE 20 -/* No standard control callbacks for SNDRV_CTL_ELEM_IFACE_CARD - * Define two controls, one is Volume control callbacks, the other is - * flag setting control callbacks. - */ - -/* Volume control callbacks for tas2781 */ -#define ACARD_SINGLE_RANGE_EXT_TLV(xname, xreg, xshift, xmin, xmax, xinvert, \ - xhandler_get, xhandler_put, tlv_array) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = (xname),\ - .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\ - SNDRV_CTL_ELEM_ACCESS_READWRITE,\ - .tlv.p = (tlv_array), \ - .info = snd_soc_info_volsw, \ - .get = xhandler_get, .put = xhandler_put, \ - .private_value = (unsigned long)&(struct soc_mixer_control) \ - {.reg = xreg, .rreg = xreg, .shift = xshift, \ - .rshift = xshift, .min = xmin, .max = xmax, \ - .invert = xinvert} } - -/* Flag control callbacks for tas2781 */ -#define ACARD_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = xname, \ - .info = snd_ctl_boolean_mono_info, \ - .get = xhandler_get, .put = xhandler_put, \ - .private_value = xdata } - enum calib_data { R0_VAL = 0, INV_R0, diff --git a/sound/pci/hda/tas2781_hda_spi.c b/sound/pci/hda/tas2781_hda_spi.c index 399f2e4c3b62..c6be2be1b53e 100644 --- a/sound/pci/hda/tas2781_hda_spi.c +++ b/sound/pci/hda/tas2781_hda_spi.c @@ -2,7 +2,7 @@ // // TAS2781 HDA SPI driver // -// Copyright 2024 Texas Instruments, Inc. +// Copyright 2024 - 2025 Texas Instruments, Inc. // // Author: Baojun Xu <baojun.xu(a)ti.com> @@ -38,38 +38,7 @@ #include "hda_component.h" #include "hda_jack.h" #include "hda_generic.h" - -/* - * No standard control callbacks for SNDRV_CTL_ELEM_IFACE_CARD - * Define two controls, one is Volume control callbacks, the other is - * flag setting control callbacks. - */ - -/* Volume control callbacks for tas2781 */ -#define ACARD_SINGLE_RANGE_EXT_TLV(xname, xreg, xshift, xmin, xmax, xinvert, \ - xhandler_get, xhandler_put, tlv_array) { \ - .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = (xname), \ - .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \ - SNDRV_CTL_ELEM_ACCESS_READWRITE, \ - .tlv.p = (tlv_array), \ - .info = snd_soc_info_volsw, \ - .get = xhandler_get, .put = xhandler_put, \ - .private_value = (unsigned long)&(struct soc_mixer_control) { \ - .reg = xreg, .rreg = xreg, \ - .shift = xshift, .rshift = xshift,\ - .min = xmin, .max = xmax, .invert = xinvert, \ - } \ -} - -/* Flag control callbacks for tas2781 */ -#define ACARD_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) { \ - .iface = SNDRV_CTL_ELEM_IFACE_CARD, \ - .name = xname, \ - .info = snd_ctl_boolean_mono_info, \ - .get = xhandler_get, \ - .put = xhandler_put, \ - .private_value = xdata, \ -} +#include "tas2781_hda.h" struct tas2781_hda { struct tasdevice_priv *priv; -- 2.34.1

2 1

No audio on Lenovo Yoga Slim 7 14ILL1
by GitHub issues - edited 15 Apr '25

15 Apr '25

alsa-project/alsa-ucm-conf issue #548 was edited from miguel1117: Only "Dummy Output" is available as an output device on the Lenovo Yoga Slim 7 14ILL1. I'm not absolutely sure if this is the right place to report this so apologies if it's not. [ALSA information](https://alsa-project.org/db/?f=71342ec47d52681c81335d75d2947d8… Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/548 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

No audio on Lenovo Yoga Slim 7 14ILL1
by GitHub issues - opened 15 Apr '25

15 Apr '25

alsa-project/alsa-ucm-conf issue #548 was opened from miguel1117: Only "Dummy Output" is available as an output device on the Lenovo Yoga Slim 7 14ILL1. I'm not absolutely sure if this is the right place to report this so apologies if it's not. [ALSA information](https://alsa-project.org/db/?f=80c739775b022831be9c3aad038f8de… Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/548 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Steinberg UR22C: Version 1.2.14 introduced "[ALSA UCM error]" on older firmware.
by GitHub issues - edited 15 Apr '25

15 Apr '25

alsa-project/alsa-ucm-conf issue #547 was edited from NoXPhasma: Since version 1.2.14 the `node.description` of the Steinberg UR22C shows `[ALSA UCM error]`: ``` node.description = "Steinberg UR22C [ALSA UCM error] Direct Steinberg UR22C" ``` ``` > journalctl --user -u wireplumber --boot 0 systemd[1286]: Started Multimedia Service Session Manager. wp-internal-comp-loader: Loading profile 'main' spa.alsa: Error in ALSA UCM profile for _ucm0001.hw:UR22C,0 (HiFi: Line 3: source): CaptureChannels=4 > avail 2 spa.alsa: Errors in ALSA UCM profile for card Steinberg UR22C wireplumber[1359]: wp-device: SPA handle 'api.libcamera.enum.manager' could not be loaded; is it installed? wireplumber[1359]: s-monitors-libcamera: PipeWire's libcamera SPA plugin is missing or broken. Some camera types may not be supported. wireplumber[1359]: default: Failed to get percentage from UPower: org.freedesktop.DBus.Error.NameHasNoOwner wireplumber[1359]: spa.bluez5: BlueZ system service is not available ``` Reverting to version 1.2.13 fixes this issue. Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/547 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Steinberg UR22C: Version 1.2.14 introduced "[ALSA UCM error]"
by GitHub issues - edited 15 Apr '25

15 Apr '25

alsa-project/alsa-ucm-conf issue #547 was edited from NoXPhasma: Since version 1.2.14 the `node.description` of the Steinberg UR22C shows `[ALSA UCM error]`: ``` node.description = "Steinberg UR22C [ALSA UCM error] Direct Steinberg UR22C" ``` ``` > journalctl --user -u wireplumber --boot 0 systemd[1286]: Started Multimedia Service Session Manager. wp-internal-comp-loader: Loading profile 'main' spa.alsa: Error in ALSA UCM profile for _ucm0001.hw:UR22C,0 (HiFi: Line 3: source): CaptureChannels=4 > avail 2 spa.alsa: Errors in ALSA UCM profile for card Steinberg UR22C wireplumber[1359]: wp-device: SPA handle 'api.libcamera.enum.manager' could not be loaded; is it installed? wireplumber[1359]: s-monitors-libcamera: PipeWire's libcamera SPA plugin is missing or broken. Some camera types may not be supported. wireplumber[1359]: default: Failed to get percentage from UPower: org.freedesktop.DBus.Error.NameHasNoOwner wireplumber[1359]: spa.bluez5: BlueZ system service is not available ``` Reverting to version 1.2.13 fixes this issue. Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/547 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Steinberg UR22C: Version 1.2.14 introduced "[ALSA UCM error]"
by GitHub issues - opened 15 Apr '25

15 Apr '25

alsa-project/alsa-ucm-conf issue #547 was opened from NoXPhasma: Since version 1.2.14 the `node.description` of the Steinberg UR22C shows `[ALSA UCM error]`: ``` node.description = "Steinberg UR22C [ALSA UCM error] Direct Steinberg UR22C" ``` Reverting to version 1.2.13 fixes this issue. Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/547 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[RESEND PATCH v2] ALSA: hda/tas2781: Create a common header for both spi and i2c tas2781 hda driver
by Shenghao Ding 15 Apr '25

15 Apr '25

Move the common macro definition of kcontrols into a common header. Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- v2: - Follow IWYU principle, add sound/asound.h into the header file. v1: - Revise the year of spi and i2c tas2781 hda drivers. - Create a common header for both spi and i2c tas2781 hda driver to define the common macros and declare the common functions. --- sound/pci/hda/tas2781_hda.h | 44 +++++++++++++++++++++++++++++++++ sound/pci/hda/tas2781_hda_i2c.c | 29 ++-------------------- sound/pci/hda/tas2781_hda_spi.c | 35 ++------------------------ 3 files changed, 48 insertions(+), 60 deletions(-) create mode 100644 sound/pci/hda/tas2781_hda.h diff --git a/sound/pci/hda/tas2781_hda.h b/sound/pci/hda/tas2781_hda.h new file mode 100644 index 000000000000..fc741fac419a --- /dev/null +++ b/sound/pci/hda/tas2781_hda.h @@ -0,0 +1,44 @@ +/* SPDX-License-Identifier: GPL-2.0-only + * + * HDA audio driver for Texas Instruments TAS2781 smart amp + * + * Copyright (C) 2025 Texas Instruments, Inc. + */ +#ifndef __TAS2781_HDA_H__ +#define __TAS2781_HDA_H__ + +#include <sound/asound.h> + +/* + * No standard control callbacks for SNDRV_CTL_ELEM_IFACE_CARD + * Define two controls, one is Volume control callbacks, the other is + * flag setting control callbacks. + */ + +/* Volume control callbacks for tas2781 */ +#define ACARD_SINGLE_RANGE_EXT_TLV(xname, xreg, xshift, xmin, xmax, xinvert, \ + xhandler_get, xhandler_put, tlv_array) { \ + .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = (xname), \ + .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \ + SNDRV_CTL_ELEM_ACCESS_READWRITE, \ + .tlv.p = (tlv_array), \ + .info = snd_soc_info_volsw, \ + .get = xhandler_get, .put = xhandler_put, \ + .private_value = (unsigned long)&(struct soc_mixer_control) { \ + .reg = xreg, .rreg = xreg, \ + .shift = xshift, .rshift = xshift,\ + .min = xmin, .max = xmax, .invert = xinvert, \ + } \ +} + +/* Flag control callbacks for tas2781 */ +#define ACARD_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) { \ + .iface = SNDRV_CTL_ELEM_IFACE_CARD, \ + .name = xname, \ + .info = snd_ctl_boolean_mono_info, \ + .get = xhandler_get, \ + .put = xhandler_put, \ + .private_value = xdata, \ +} + +#endif diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c index 29dc4f500580..9d94ae5fcfe0 100644 --- a/sound/pci/hda/tas2781_hda_i2c.c +++ b/sound/pci/hda/tas2781_hda_i2c.c @@ -2,7 +2,7 @@ // // TAS2781 HDA I2C driver // -// Copyright 2023 - 2024 Texas Instruments, Inc. +// Copyright 2023 - 2025 Texas Instruments, Inc. // // Author: Shenghao Ding <shenghao-ding(a)ti.com> // Current maintainer: Baojun Xu <baojun.xu(a)ti.com> @@ -30,35 +30,10 @@ #include "hda_component.h" #include "hda_jack.h" #include "hda_generic.h" +#include "tas2781_hda.h" #define TASDEVICE_SPEAKER_CALIBRATION_SIZE 20 -/* No standard control callbacks for SNDRV_CTL_ELEM_IFACE_CARD - * Define two controls, one is Volume control callbacks, the other is - * flag setting control callbacks. - */ - -/* Volume control callbacks for tas2781 */ -#define ACARD_SINGLE_RANGE_EXT_TLV(xname, xreg, xshift, xmin, xmax, xinvert, \ - xhandler_get, xhandler_put, tlv_array) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = (xname),\ - .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\ - SNDRV_CTL_ELEM_ACCESS_READWRITE,\ - .tlv.p = (tlv_array), \ - .info = snd_soc_info_volsw, \ - .get = xhandler_get, .put = xhandler_put, \ - .private_value = (unsigned long)&(struct soc_mixer_control) \ - {.reg = xreg, .rreg = xreg, .shift = xshift, \ - .rshift = xshift, .min = xmin, .max = xmax, \ - .invert = xinvert} } - -/* Flag control callbacks for tas2781 */ -#define ACARD_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = xname, \ - .info = snd_ctl_boolean_mono_info, \ - .get = xhandler_get, .put = xhandler_put, \ - .private_value = xdata } - enum calib_data { R0_VAL = 0, INV_R0, diff --git a/sound/pci/hda/tas2781_hda_spi.c b/sound/pci/hda/tas2781_hda_spi.c index 399f2e4c3b62..c6be2be1b53e 100644 --- a/sound/pci/hda/tas2781_hda_spi.c +++ b/sound/pci/hda/tas2781_hda_spi.c @@ -2,7 +2,7 @@ // // TAS2781 HDA SPI driver // -// Copyright 2024 Texas Instruments, Inc. +// Copyright 2024 - 2025 Texas Instruments, Inc. // // Author: Baojun Xu <baojun.xu(a)ti.com> @@ -38,38 +38,7 @@ #include "hda_component.h" #include "hda_jack.h" #include "hda_generic.h" - -/* - * No standard control callbacks for SNDRV_CTL_ELEM_IFACE_CARD - * Define two controls, one is Volume control callbacks, the other is - * flag setting control callbacks. - */ - -/* Volume control callbacks for tas2781 */ -#define ACARD_SINGLE_RANGE_EXT_TLV(xname, xreg, xshift, xmin, xmax, xinvert, \ - xhandler_get, xhandler_put, tlv_array) { \ - .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = (xname), \ - .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \ - SNDRV_CTL_ELEM_ACCESS_READWRITE, \ - .tlv.p = (tlv_array), \ - .info = snd_soc_info_volsw, \ - .get = xhandler_get, .put = xhandler_put, \ - .private_value = (unsigned long)&(struct soc_mixer_control) { \ - .reg = xreg, .rreg = xreg, \ - .shift = xshift, .rshift = xshift,\ - .min = xmin, .max = xmax, .invert = xinvert, \ - } \ -} - -/* Flag control callbacks for tas2781 */ -#define ACARD_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) { \ - .iface = SNDRV_CTL_ELEM_IFACE_CARD, \ - .name = xname, \ - .info = snd_ctl_boolean_mono_info, \ - .get = xhandler_get, \ - .put = xhandler_put, \ - .private_value = xdata, \ -} +#include "tas2781_hda.h" struct tas2781_hda { struct tasdevice_priv *priv; -- 2.34.1

2 1

ALSA 1.2.8 release
by Jaroslav Kysela 15 Apr '25

15 Apr '25

Hello all, new ALSA userspace packages were released. You may download them from the ALSA website http://www.alsa-project.org or directly: HTTP: https://www.alsa-project.org/files/pub FTP: ftp://ftp.alsa-project.org/pub Released packages: alsa-lib alsa-utils alsa-ucm-conf tinycompress Full list of changes: https://www.alsa-project.org/wiki/Changes_v1.2.7.2_v1.2.8 The fingerprint of the public signing key is: F04D F507 37AC 1A88 4C4B 3D71 8380 596D A6E5 9C91 Have fun, Jaroslav -- Jaroslav Kysela <perex(a)perex.cz> Linux Sound Maintainer; ALSA Project; Red Hat, Inc.

2 8

1.2.14: SetuptoolsDeprecationWarning due to the use of `sys.exit(0)`
by GitHub issues - opened 15 Apr '25

15 Apr '25

alsa-project/alsa-python issue #18 was opened from dvzrv: Hi! 👋 I package this project for Arch Linux. During update to 1.2.14 I noticed that setuptools now raises the following warning: ``` /usr/lib/python3.13/site-packages/setuptools/build_meta.py:522: SetuptoolsDeprecationWarning: Running `setup.py` directly as CLI tool is deprecated. !! ******************************************************************************** Please avoid using `sys.exit(0)` or similar statements that don't fit in the paradigm of a configuration file. See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html for details. ******************************************************************************** !! super().run_setup(setup_script=setup_script) ``` This appears to be triggered by the `sys.exit(0)` call in setup.py: https://github.com/alsa-project/alsa-python/blob/20b2b3999f24af462815b9c86e… (Setuptools now offers one of the various PEP517 build backends and calling setup.py directly as a script is deprecated). Looking at the file I noticed that there are still conditionals that accommodate Python2: https://github.com/alsa-project/alsa-python/blob/20b2b3999f24af462815b9c86e… Those should be removed, as the script itself is marked as Python3 (and well of course because Python2 is long discontinued 😅). Issue URL : https://github.com/alsa-project/alsa-python/issues/18 Repository URL: https://github.com/alsa-project/alsa-python

1 0

recent change in seqmid.c is broken?
by Takashi Iwai 15 Apr '25

15 Apr '25

Hi Jaroslav, I'm afraid that your recent fix for alsa-lib commit a4e47461eca1 doesn't work as expected: ``` @@ -664,15 +663,11 @@ static void update_group_ports(snd_seq_t *seq, snd_ump_endpoint_info_t *ep) break; } - if (!*bp->name) + if (bp->name[0] == '\0') continue; - len = strlen(blknames); - if (len) - snprintf(blknames + len, sizeof(blknames) - len, - ", %s", bp->name); - else - snd_strlcpy(blknames, (const char *)bp->name, - sizeof(blknames)); + if (blknames[0]) + snd_strlcpy(blknames, ", ", sizeof(blknames)); + snd_strlcpy(blknames, (const char *)bp->name, sizeof(blknames)); } if (!*blknames) ``` The original code appended the new bp->name string with the prefix of ", " if blknames is already present, but the new code looks as if it overwrites onto blknames with strlcpy() from scratch for each bp->name. FWIW, the code there used to be with strlcat(), but it was rewritten in the way above because strlcat() isn't always available in commit d9694398130c. thanks, Takashi

2 3

On output devices, `snd_pcm_open()` makes a bad loud tick.
by GitHub issues - opened 13 Apr '25

13 Apr '25

alsa-project/alsa-lib issue #451 was opened from ewtoombs: Minimal reproduction: ``` #include <alsa/asoundlib.h> #include <stdbool.h> int main(int argc, const char **argv) { snd_pcm_t *out; assert(snd_pcm_open(&out, "default", // the name of the device being opened SND_PCM_STREAM_PLAYBACK, // it is an output stream false // iff nonblocking stream ) == 0); } ``` (Compile with `gcc -o test test.c -lasound`.) Relevant `lspci`: ``` 00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21) ``` `uname`: ``` Linux robert 6.13.8-arch1-1 #1 SMP PREEMPT_DYNAMIC Sun, 23 Mar 2025 17:17:30 +0000 x86_64 GNU/Linux ``` alsa-lib version: 1.2.13-1 (archlinux) I've heard similar artefacts on many different sound cards, though, across many different architectures, always on linux. One must wait about five minutes in between trials, or the artefact does not occur. This isn't a minor detail. The tick is very loud. It might even damage speakers in a worst case scenario. Issue URL : https://github.com/alsa-project/alsa-lib/issues/451 Repository URL: https://github.com/alsa-project/alsa-lib

1 0

[GIT PULL] ASoC fixes for v6.15-rc1
by Mark Brown 11 Apr '25

11 Apr '25

The following changes since commit 0af2f6be1b4281385b618cb86ad946eded089ac8: Linux 6.15-rc1 (2025-04-06 13:11:33 -0700) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git tags/asoc-fix-v6.15-rc1 for you to fetch changes up to e6c4618422a25cb266bf752040eb509865caeb0e: MAINTAINERS: update my email address (2025-04-11 06:17:24 +0100) ---------------------------------------------------------------- ASoC: Fixes for v6.15 A set of small fixes, quirks and device ID additions that came in since -rc1, none of them super stand out. There's also a change to Srini's email address in MAINTAINERS. ---------------------------------------------------------------- Amadeusz Sławiński (1): ASoC: Intel: avs: Constrain path based on BE capabilities Brady Norander (1): ASoC: dwc: always enable/disable i2s irqs Charles Keepax (1): ASoC: cs42l43: Reset clamp override on jack removal Evgeny Pimenov (1): ASoC: qcom: Fix sc7280 lpass potential buffer overflow Henry Martin (1): ASoC: Intel: avs: Fix null-ptr-deref in avs_component_probe() Herve Codina (1): ASoC: fsl: fsl_qmc_audio: Reset audio data pointers on TRIGGER_START event Kuninori Morimoto (1): ASoC: hdmi-codec: use RTD ID instead of DAI ID for ELD entry Mark Brown (2): ASoC: codecs: lpass-wsa: fix VI capture setup. MAINTAINERS: update my email address Peter Ujfalusi (1): ASoC: Intel: sof_sdw: Add quirk for Asus Zenbook S16 Richard Fitzgerald (1): firmware: cs_dsp: test_bin_error: Fix uninitialized data used as fw version Shengjiu Wang (1): ASoC: fsl_asrc_dma: get codec or cpu dai from backend Srinivas Kandagatla (4): ASoC: codecs:lpass-wsa-macro: Fix vi feedback rate ASoC: codecs:lpass-wsa-macro: Fix logic of enabling vi channels MAINTAINERS: use kernel.org alias mailmap: Add entry for Srinivas Kandagatla Weidong Wang (1): ASoC: codecs: Add of_match_table for aw888081 driver .mailmap | 2 + MAINTAINERS | 8 +- .../firmware/cirrus/test/cs_dsp_mock_mem_maps.c | 30 ------ drivers/firmware/cirrus/test/cs_dsp_test_bin.c | 2 +- .../firmware/cirrus/test/cs_dsp_test_bin_error.c | 2 +- include/linux/firmware/cirrus/cs_dsp_test_utils.h | 1 - sound/soc/codecs/aw88081.c | 10 ++ sound/soc/codecs/cs42l43-jack.c | 3 + sound/soc/codecs/hdmi-codec.c | 22 +++- sound/soc/codecs/lpass-wsa-macro.c | 117 +++++++++++++++------ sound/soc/dwc/dwc-i2s.c | 13 ++- sound/soc/fsl/fsl_asrc_dma.c | 15 ++- sound/soc/fsl/fsl_qmc_audio.c | 3 + sound/soc/intel/avs/path.c | 72 +++++++++++++ sound/soc/intel/avs/path.h | 5 + sound/soc/intel/avs/pcm.c | 52 ++++++++- sound/soc/intel/boards/sof_sdw.c | 1 + sound/soc/qcom/lpass.h | 3 +- 18 files changed, 277 insertions(+), 84 deletions(-)

2 1

[PATCH 0/2] MAINTAINERS: update my email address
by srinivas.kandagatla＠linaro.org 11 Apr '25

11 Apr '25

From: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> Update .mailmap and MAINTAINERS to point to the @kernel.org instead of the @linaro.org. Linaro address will stop working in few days. Mark or Greg, could you please pick these two patches? Srinivas Kandagatla (2): MAINTAINERS: use kernel.org alias mailmap: Add entry for Srinivas Kandagatla .mailmap | 2 ++ MAINTAINERS | 8 ++++---- 2 files changed, 6 insertions(+), 4 deletions(-) -- 2.25.1

2 3

Add support of HyperX SoloCast
by GitHub pull_request - opened 10 Apr '25

10 Apr '25

alsa-project/alsa-ucm-conf pull request #545 was opened from serhii-nakon: Support of - volume control - un/mute control PS: About un/mute control - only from PC to Mic, vise versa does not work - like when you un/mute Mic on PC it works as expected (even LED show actual status) but when you click button on Mic side it does not reflect on PC side. Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/545 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/545.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

ucm2: Qualcomm: add Asus Zenbook A14
by GitHub pull_request - opened 10 Apr '25

10 Apr '25

alsa-project/alsa-ucm-conf pull request #544 was opened from alexVinarskis: Add a Regex string, seems compatible with Lenovo T14s x2 speakers, x2 DMICs, x3 DP (x2 USB-C, x1 DP->HDMI), headphone jack. Initial support for the platform is available on the [lists](https://lore.kernel.org/all/20250402084646.10098-1-alex.vinarskis@gm…, with [Audio part ](https://github.com/alexVinarskis/linux-x1e80100-zenbook-a14/blob/master/0013-arm64-dts-qcom-support-sound-on-Asus-Zenbook-A14.patch)not being upstreamed just yet. Tested that speakers, MICs and jack are working. Respective audioreach-topology changes are open [for PR.](https://github.com/linux-msm/audioreach-topology/pull/14) Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/544 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/544.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH v2] ALSA: hda/tas2781: Create a common header for both spi and i2c tas2781 hda driver
by Shenghao Ding 10 Apr '25

10 Apr '25

Move the common macro definition of kcontrols into a common header. Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- v2: - Follow IWYU principle, add sound/asound.h into the header file. v1: - Revise the year of spi and i2c tas2781 hda drivers. - Create a common header for both spi and i2c tas2781 hda driver to define the common macros and declare the common functions. --- sound/pci/hda/tas2781_hda.h | 44 +++++++++++++++++++++++++++++++++ sound/pci/hda/tas2781_hda_i2c.c | 29 ++-------------------- sound/pci/hda/tas2781_hda_spi.c | 35 ++------------------------ 3 files changed, 48 insertions(+), 60 deletions(-) create mode 100644 sound/pci/hda/tas2781_hda.h diff --git a/sound/pci/hda/tas2781_hda.h b/sound/pci/hda/tas2781_hda.h new file mode 100644 index 000000000000..fc741fac419a --- /dev/null +++ b/sound/pci/hda/tas2781_hda.h @@ -0,0 +1,44 @@ +/* SPDX-License-Identifier: GPL-2.0-only + * + * HDA audio driver for Texas Instruments TAS2781 smart amp + * + * Copyright (C) 2025 Texas Instruments, Inc. + */ +#ifndef __TAS2781_HDA_H__ +#define __TAS2781_HDA_H__ + +#include <sound/asound.h> + +/* + * No standard control callbacks for SNDRV_CTL_ELEM_IFACE_CARD + * Define two controls, one is Volume control callbacks, the other is + * flag setting control callbacks. + */ + +/* Volume control callbacks for tas2781 */ +#define ACARD_SINGLE_RANGE_EXT_TLV(xname, xreg, xshift, xmin, xmax, xinvert, \ + xhandler_get, xhandler_put, tlv_array) { \ + .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = (xname), \ + .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \ + SNDRV_CTL_ELEM_ACCESS_READWRITE, \ + .tlv.p = (tlv_array), \ + .info = snd_soc_info_volsw, \ + .get = xhandler_get, .put = xhandler_put, \ + .private_value = (unsigned long)&(struct soc_mixer_control) { \ + .reg = xreg, .rreg = xreg, \ + .shift = xshift, .rshift = xshift,\ + .min = xmin, .max = xmax, .invert = xinvert, \ + } \ +} + +/* Flag control callbacks for tas2781 */ +#define ACARD_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) { \ + .iface = SNDRV_CTL_ELEM_IFACE_CARD, \ + .name = xname, \ + .info = snd_ctl_boolean_mono_info, \ + .get = xhandler_get, \ + .put = xhandler_put, \ + .private_value = xdata, \ +} + +#endif diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c index 29dc4f500580..9d94ae5fcfe0 100644 --- a/sound/pci/hda/tas2781_hda_i2c.c +++ b/sound/pci/hda/tas2781_hda_i2c.c @@ -2,7 +2,7 @@ // // TAS2781 HDA I2C driver // -// Copyright 2023 - 2024 Texas Instruments, Inc. +// Copyright 2023 - 2025 Texas Instruments, Inc. // // Author: Shenghao Ding <shenghao-ding(a)ti.com> // Current maintainer: Baojun Xu <baojun.xu(a)ti.com> @@ -30,35 +30,10 @@ #include "hda_component.h" #include "hda_jack.h" #include "hda_generic.h" +#include "tas2781_hda.h" #define TASDEVICE_SPEAKER_CALIBRATION_SIZE 20 -/* No standard control callbacks for SNDRV_CTL_ELEM_IFACE_CARD - * Define two controls, one is Volume control callbacks, the other is - * flag setting control callbacks. - */ - -/* Volume control callbacks for tas2781 */ -#define ACARD_SINGLE_RANGE_EXT_TLV(xname, xreg, xshift, xmin, xmax, xinvert, \ - xhandler_get, xhandler_put, tlv_array) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = (xname),\ - .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\ - SNDRV_CTL_ELEM_ACCESS_READWRITE,\ - .tlv.p = (tlv_array), \ - .info = snd_soc_info_volsw, \ - .get = xhandler_get, .put = xhandler_put, \ - .private_value = (unsigned long)&(struct soc_mixer_control) \ - {.reg = xreg, .rreg = xreg, .shift = xshift, \ - .rshift = xshift, .min = xmin, .max = xmax, \ - .invert = xinvert} } - -/* Flag control callbacks for tas2781 */ -#define ACARD_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = xname, \ - .info = snd_ctl_boolean_mono_info, \ - .get = xhandler_get, .put = xhandler_put, \ - .private_value = xdata } - enum calib_data { R0_VAL = 0, INV_R0, diff --git a/sound/pci/hda/tas2781_hda_spi.c b/sound/pci/hda/tas2781_hda_spi.c index 399f2e4c3b62..c6be2be1b53e 100644 --- a/sound/pci/hda/tas2781_hda_spi.c +++ b/sound/pci/hda/tas2781_hda_spi.c @@ -2,7 +2,7 @@ // // TAS2781 HDA SPI driver // -// Copyright 2024 Texas Instruments, Inc. +// Copyright 2024 - 2025 Texas Instruments, Inc. // // Author: Baojun Xu <baojun.xu(a)ti.com> @@ -38,38 +38,7 @@ #include "hda_component.h" #include "hda_jack.h" #include "hda_generic.h" - -/* - * No standard control callbacks for SNDRV_CTL_ELEM_IFACE_CARD - * Define two controls, one is Volume control callbacks, the other is - * flag setting control callbacks. - */ - -/* Volume control callbacks for tas2781 */ -#define ACARD_SINGLE_RANGE_EXT_TLV(xname, xreg, xshift, xmin, xmax, xinvert, \ - xhandler_get, xhandler_put, tlv_array) { \ - .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = (xname), \ - .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \ - SNDRV_CTL_ELEM_ACCESS_READWRITE, \ - .tlv.p = (tlv_array), \ - .info = snd_soc_info_volsw, \ - .get = xhandler_get, .put = xhandler_put, \ - .private_value = (unsigned long)&(struct soc_mixer_control) { \ - .reg = xreg, .rreg = xreg, \ - .shift = xshift, .rshift = xshift,\ - .min = xmin, .max = xmax, .invert = xinvert, \ - } \ -} - -/* Flag control callbacks for tas2781 */ -#define ACARD_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) { \ - .iface = SNDRV_CTL_ELEM_IFACE_CARD, \ - .name = xname, \ - .info = snd_ctl_boolean_mono_info, \ - .get = xhandler_get, \ - .put = xhandler_put, \ - .private_value = xdata, \ -} +#include "tas2781_hda.h" struct tas2781_hda { struct tasdevice_priv *priv; -- 2.34.1

1 0

Enable Headset Mic for ASUS platform
by Kailang 09 Apr '25

09 Apr '25

Hi Takashi, Attach patch was fixed headset Mic issue for Asus platform. Many Thanks. Kailang.

2 1

Dell Precision 3571: DMIC not detected by SOF driver, silent mic under Linux, works in Windows
by Adam Larios 08 Apr '25

08 Apr '25

*System*: Dell Precision 3571 Realtek ALC3204 codec Intel Alder Lake (SOF platform) *Symptoms*: Internal mic is silent or muffled in all Linux applications Works perfectly in Windows SOF driver loads correctly with firmware sof-adl.ri and topology sof-hda-generic.tplg But dmesg shows: sof-audio-pci-intel-tgl 0000:00:1f.3: DMICs detected in NHLT tables: 0 No working audio input nodes exposed in PipeWire *Tested*: - Ubuntu 24.04 with kernel 6.8.0-57-generic - snd-intel-dspcfg.dsp_driver=3 set - PulseAudio and PipeWire backends - alsa-base.conf overrides for model options - hdajackretask pin remapping - SOF firmware and topology confirmed present *Conclusion*: Firmware/ACPI likely missing DMIC NHLT entry; requesting kernel quirk or guidance

1 0

[PATCH v1] ALSA: hda/tas2781: Create a common header for both spi and i2c tas2781 hda driver
by Shenghao Ding 08 Apr '25

08 Apr '25

Move the common macro definition of kcontrols into a common header. Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- v1: - revise the year of spi and i2c tas2781 hda drivers. - Create a common header for both spi and i2c tas2781 hda driver to define the common macros and declare the common functions. --- sound/pci/hda/tas2781_hda.h | 42 +++++++++++++++++++++++++++++++++ sound/pci/hda/tas2781_hda_i2c.c | 29 ++--------------------- sound/pci/hda/tas2781_hda_spi.c | 35 ++------------------------- 3 files changed, 46 insertions(+), 60 deletions(-) create mode 100644 sound/pci/hda/tas2781_hda.h diff --git a/sound/pci/hda/tas2781_hda.h b/sound/pci/hda/tas2781_hda.h new file mode 100644 index 000000000000..c57909c0ed65 --- /dev/null +++ b/sound/pci/hda/tas2781_hda.h @@ -0,0 +1,42 @@ +/* SPDX-License-Identifier: GPL-2.0-only + * + * HDA audio driver for Texas Instruments TAS2781 smart amp + * + * Copyright (C) 2025 Texas Instruments, Inc. + */ +#ifndef __TAS2781_HDA_H__ +#define __TAS2781_HDA_H__ + +/* + * No standard control callbacks for SNDRV_CTL_ELEM_IFACE_CARD + * Define two controls, one is Volume control callbacks, the other is + * flag setting control callbacks. + */ + +/* Volume control callbacks for tas2781 */ +#define ACARD_SINGLE_RANGE_EXT_TLV(xname, xreg, xshift, xmin, xmax, xinvert, \ + xhandler_get, xhandler_put, tlv_array) { \ + .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = (xname), \ + .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \ + SNDRV_CTL_ELEM_ACCESS_READWRITE, \ + .tlv.p = (tlv_array), \ + .info = snd_soc_info_volsw, \ + .get = xhandler_get, .put = xhandler_put, \ + .private_value = (unsigned long)&(struct soc_mixer_control) { \ + .reg = xreg, .rreg = xreg, \ + .shift = xshift, .rshift = xshift,\ + .min = xmin, .max = xmax, .invert = xinvert, \ + } \ +} + +/* Flag control callbacks for tas2781 */ +#define ACARD_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) { \ + .iface = SNDRV_CTL_ELEM_IFACE_CARD, \ + .name = xname, \ + .info = snd_ctl_boolean_mono_info, \ + .get = xhandler_get, \ + .put = xhandler_put, \ + .private_value = xdata, \ +} + +#endif diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c index 29dc4f500580..9d94ae5fcfe0 100644 --- a/sound/pci/hda/tas2781_hda_i2c.c +++ b/sound/pci/hda/tas2781_hda_i2c.c @@ -2,7 +2,7 @@ // // TAS2781 HDA I2C driver // -// Copyright 2023 - 2024 Texas Instruments, Inc. +// Copyright 2023 - 2025 Texas Instruments, Inc. // // Author: Shenghao Ding <shenghao-ding(a)ti.com> // Current maintainer: Baojun Xu <baojun.xu(a)ti.com> @@ -30,35 +30,10 @@ #include "hda_component.h" #include "hda_jack.h" #include "hda_generic.h" +#include "tas2781_hda.h" #define TASDEVICE_SPEAKER_CALIBRATION_SIZE 20 -/* No standard control callbacks for SNDRV_CTL_ELEM_IFACE_CARD - * Define two controls, one is Volume control callbacks, the other is - * flag setting control callbacks. - */ - -/* Volume control callbacks for tas2781 */ -#define ACARD_SINGLE_RANGE_EXT_TLV(xname, xreg, xshift, xmin, xmax, xinvert, \ - xhandler_get, xhandler_put, tlv_array) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = (xname),\ - .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\ - SNDRV_CTL_ELEM_ACCESS_READWRITE,\ - .tlv.p = (tlv_array), \ - .info = snd_soc_info_volsw, \ - .get = xhandler_get, .put = xhandler_put, \ - .private_value = (unsigned long)&(struct soc_mixer_control) \ - {.reg = xreg, .rreg = xreg, .shift = xshift, \ - .rshift = xshift, .min = xmin, .max = xmax, \ - .invert = xinvert} } - -/* Flag control callbacks for tas2781 */ -#define ACARD_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = xname, \ - .info = snd_ctl_boolean_mono_info, \ - .get = xhandler_get, .put = xhandler_put, \ - .private_value = xdata } - enum calib_data { R0_VAL = 0, INV_R0, diff --git a/sound/pci/hda/tas2781_hda_spi.c b/sound/pci/hda/tas2781_hda_spi.c index 399f2e4c3b62..c6be2be1b53e 100644 --- a/sound/pci/hda/tas2781_hda_spi.c +++ b/sound/pci/hda/tas2781_hda_spi.c @@ -2,7 +2,7 @@ // // TAS2781 HDA SPI driver // -// Copyright 2024 Texas Instruments, Inc. +// Copyright 2024 - 2025 Texas Instruments, Inc. // // Author: Baojun Xu <baojun.xu(a)ti.com> @@ -38,38 +38,7 @@ #include "hda_component.h" #include "hda_jack.h" #include "hda_generic.h" - -/* - * No standard control callbacks for SNDRV_CTL_ELEM_IFACE_CARD - * Define two controls, one is Volume control callbacks, the other is - * flag setting control callbacks. - */ - -/* Volume control callbacks for tas2781 */ -#define ACARD_SINGLE_RANGE_EXT_TLV(xname, xreg, xshift, xmin, xmax, xinvert, \ - xhandler_get, xhandler_put, tlv_array) { \ - .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = (xname), \ - .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \ - SNDRV_CTL_ELEM_ACCESS_READWRITE, \ - .tlv.p = (tlv_array), \ - .info = snd_soc_info_volsw, \ - .get = xhandler_get, .put = xhandler_put, \ - .private_value = (unsigned long)&(struct soc_mixer_control) { \ - .reg = xreg, .rreg = xreg, \ - .shift = xshift, .rshift = xshift,\ - .min = xmin, .max = xmax, .invert = xinvert, \ - } \ -} - -/* Flag control callbacks for tas2781 */ -#define ACARD_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) { \ - .iface = SNDRV_CTL_ELEM_IFACE_CARD, \ - .name = xname, \ - .info = snd_ctl_boolean_mono_info, \ - .get = xhandler_get, \ - .put = xhandler_put, \ - .private_value = xdata, \ -} +#include "tas2781_hda.h" struct tas2781_hda { struct tasdevice_priv *priv; -- 2.34.1

2 1