April 2025 - Alsa-devel - mailman.alsa-project.org

ALSA 1.2.8 release
by Jaroslav Kysela 08 Dec '25

08 Dec '25

Hello all, new ALSA userspace packages were released. You may download them from the ALSA website http://www.alsa-project.org or directly: HTTP: https://www.alsa-project.org/files/pub FTP: ftp://ftp.alsa-project.org/pub Released packages: alsa-lib alsa-utils alsa-ucm-conf tinycompress Full list of changes: https://www.alsa-project.org/wiki/Changes_v1.2.7.2_v1.2.8 The fingerprint of the public signing key is: F04D F507 37AC 1A88 4C4B 3D71 8380 596D A6E5 9C91 Have fun, Jaroslav -- Jaroslav Kysela <perex(a)perex.cz> Linux Sound Maintainer; ALSA Project; Red Hat, Inc.

2 9

[alsa-devel] View alsa-lib plugins setup for any app?
by Eliot Blennerhassett 05 Dec '25

05 Dec '25

Greetings, running aplay -v will show the plugin chain setup. /proc/asound/card/pcm/* shows hw and sw params for the card driver when in use by any app Is there any way to show the alsa-lib plugin settings a-la aplay for an arbitrary application? thanks -- Eliot

4 8

[PATCH] ASoC: rt5682: Support the ALC5682I-VE codec
by derek.fang＠realtek.com 04 Dec '25

04 Dec '25

From: Derek Fang <derek.fang(a)realtek.com> The ALC5682I-VD and ALC5682I-VE use the same I2C codec driver with different calibration settings. This patch aims to handle their differences. Signed-off-by: Derek Fang <derek.fang(a)realtek.com> diff --git a/sound/soc/codecs/rt5682-i2c.c b/sound/soc/codecs/rt5682-i2c.c index ff9e14fad0cd..a8820435d1e0 100644 --- a/sound/soc/codecs/rt5682-i2c.c +++ b/sound/soc/codecs/rt5682-i2c.c @@ -186,6 +186,12 @@ static int rt5682_i2c_probe(struct i2c_client *i2c) return -ENODEV; } + regmap_read(rt5682->regmap, RT5682_INT_DEVICE_ID, &val); + if (val == 0x6956) { + dev_dbg(&i2c->dev, "ALC5682I-VE device\n"); + rt5682->ve_ic = true; + } + mutex_init(&rt5682->calibrate_mutex); rt5682_calibrate(rt5682); diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c index aa163ec40862..b4d72fc4a44d 100644 --- a/sound/soc/codecs/rt5682.c +++ b/sound/soc/codecs/rt5682.c @@ -395,6 +395,7 @@ bool rt5682_volatile_register(struct device *dev, unsigned int reg) case RT5682_4BTN_IL_CMD_1: case RT5682_AJD1_CTRL: case RT5682_HP_CALIB_CTRL_1: + case RT5682_INT_DEVICE_ID: case RT5682_DEVICE_ID: case RT5682_I2C_MODE: case RT5682_HP_CALIB_CTRL_10: @@ -419,6 +420,7 @@ bool rt5682_readable_register(struct device *dev, unsigned int reg) { switch (reg) { case RT5682_RESET: + case RT5682_INT_DEVICE_ID: case RT5682_VERSION_ID: case RT5682_VENDOR_ID: case RT5682_DEVICE_ID: @@ -3139,7 +3141,10 @@ void rt5682_calibrate(struct rt5682_priv *rt5682) regmap_write(rt5682->regmap, RT5682_PWR_DIG_1, 0x0100); regmap_write(rt5682->regmap, RT5682_HP_IMP_SENS_CTRL_19, 0x3800); regmap_write(rt5682->regmap, RT5682_CHOP_DAC, 0x3000); - regmap_write(rt5682->regmap, RT5682_CALIB_ADC_CTRL, 0x7005); + if (rt5682->ve_ic) + regmap_write(rt5682->regmap, RT5682_CHOP_ADC, 0x7005); + else + regmap_write(rt5682->regmap, RT5682_CALIB_ADC_CTRL, 0x7005); regmap_write(rt5682->regmap, RT5682_STO1_ADC_MIXER, 0x686c); regmap_write(rt5682->regmap, RT5682_CAL_REC, 0x0d0d); regmap_write(rt5682->regmap, RT5682_HP_CALIB_CTRL_2, 0x0321); @@ -3168,7 +3173,10 @@ void rt5682_calibrate(struct rt5682_priv *rt5682) regmap_write(rt5682->regmap, RT5682_GLB_CLK, 0x0000); regmap_write(rt5682->regmap, RT5682_PWR_DIG_1, 0x0000); regmap_write(rt5682->regmap, RT5682_CHOP_DAC, 0x2000); - regmap_write(rt5682->regmap, RT5682_CALIB_ADC_CTRL, 0x2005); + if (rt5682->ve_ic) + regmap_write(rt5682->regmap, RT5682_CHOP_ADC, 0x2005); + else + regmap_write(rt5682->regmap, RT5682_CALIB_ADC_CTRL, 0x2005); regmap_write(rt5682->regmap, RT5682_STO1_ADC_MIXER, 0xc0c4); regmap_write(rt5682->regmap, RT5682_CAL_REC, 0x0c0c); diff --git a/sound/soc/codecs/rt5682.h b/sound/soc/codecs/rt5682.h index b2d9e87af259..de43a5d99403 100644 --- a/sound/soc/codecs/rt5682.h +++ b/sound/soc/codecs/rt5682.h @@ -22,6 +22,7 @@ /* Info */ #define RT5682_RESET 0x0000 +#define RT5682_INT_DEVICE_ID 0x00f9 #define RT5682_VERSION_ID 0x00fd #define RT5682_VENDOR_ID 0x00fe #define RT5682_DEVICE_ID 0x00ff @@ -1446,6 +1447,7 @@ struct rt5682_priv { bool hw_init; bool first_hw_init; bool is_sdw; + bool ve_ic; #ifdef CONFIG_COMMON_CLK struct clk_hw dai_clks_hw[RT5682_DAI_NUM_CLKS]; -- 2.34.1

3 2

[PATCH] ASoC: SOF: Intel: Retry codec probing if it fails
by Kai Vehmanen 04 Dec '25

04 Dec '25

From: Hui Wang <hui.wang(a)canonical.com> On the latest Lenovo Thinkstation laptops, we often experience the speaker failure after rebooting, check the dmesg, we could see: sof-audio-pci-intel-tgl 0000:00:1f.3: codec #0 probe error, ret: -5 The analogue codec on the machine is ALC287, then we designed a testcase to reboot and check the codec probing result repeatedly, we found the analogue codec probing always failed at least once within several minutes to several hours (roughly 1 reboot per min). This issue happens on all laptops of this Thinkstation model, but with legacy HDA driver, we couldn't reproduce this issue on those laptops. And so far, this issue is not reproduced on machines which don't belong to this model. We tried to make the hda_dsp_ctrl_init_chip() same as hda_intel_init_chip() which is the controller init routine in the legacy HDA driver, but it didn't help. We found when issue happens, the resp is -1, and if we let driver re-run send_cmd() and get_response(), it will get the correct response 10ec0287, then driver continues the rest work, finally boot to the desktop and all audio function work well. Here adding codec probing retries to 3 times, it could fix the issue on this Thinkstation model, and it doesn't bring impact to other machines. Reviewed-by: Bard Liao <bard.liao(a)intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Signed-off-by: Hui Wang <hui.wang(a)canonical.com> Signed-off-by: Kai Vehmanen <kai.vehmanen(a)linux.intel.com> --- sound/soc/sof/intel/hda-codec.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) Notes: - patch for-5.16 on top of for-5.16 8a724d5f60 diff --git a/sound/soc/sof/intel/hda-codec.c b/sound/soc/sof/intel/hda-codec.c index 6744318de612..13cd96e6724a 100644 --- a/sound/soc/sof/intel/hda-codec.c +++ b/sound/soc/sof/intel/hda-codec.c @@ -22,6 +22,7 @@ #if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA_AUDIO_CODEC) #define IDISP_VID_INTEL 0x80860000 +#define CODEC_PROBE_RETRIES 3 /* load the legacy HDA codec driver */ static int request_codec_module(struct hda_codec *codec) @@ -121,12 +122,15 @@ static int hda_codec_probe(struct snd_sof_dev *sdev, int address, u32 hda_cmd = (address << 28) | (AC_NODE_ROOT << 20) | (AC_VERB_PARAMETERS << 8) | AC_PAR_VENDOR_ID; u32 resp = -1; - int ret; + int ret, retry = 0; + + do { + mutex_lock(&hbus->core.cmd_mutex); + snd_hdac_bus_send_cmd(&hbus->core, hda_cmd); + snd_hdac_bus_get_response(&hbus->core, address, &resp); + mutex_unlock(&hbus->core.cmd_mutex); + } while (resp == -1 && retry++ < CODEC_PROBE_RETRIES); - mutex_lock(&hbus->core.cmd_mutex); - snd_hdac_bus_send_cmd(&hbus->core, hda_cmd); - snd_hdac_bus_get_response(&hbus->core, address, &resp); - mutex_unlock(&hbus->core.cmd_mutex); if (resp == -1) return -EIO; dev_dbg(sdev->dev, "HDA codec #%d probed OK: response: %x\n", base-commit: 8a724d5f60904084e09de2685ff9e77bc8a40815 -- 2.34.1

3 2

[alsa-devel] Applied "ASoC: tlv320aic32x4: Model CODEC_CLKIN in CCF" to the asoc tree
by Mark Brown 02 Dec '25

02 Dec '25

The patch ASoC: tlv320aic32x4: Model CODEC_CLKIN in CCF has been applied to the asoc tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From fd2df3aeafa4b4cc468d58e147e0822967034b71 Mon Sep 17 00:00:00 2001 From: Annaliese McDermond <nh6z(a)nh6z.net> Date: Thu, 21 Mar 2019 17:58:46 -0700 Subject: [PATCH] ASoC: tlv320aic32x4: Model CODEC_CLKIN in CCF Model and manage codec clock input as a component in the Core Clock Framework. This should allow us to do some more complex clock management and power control. Also, some of the on-board chip clocks can be exposed to the outside, and this change will make those clocks easier to consume by other parts of the kernel. Signed-off-by: Annaliese McDermond <nh6z(a)nh6z.net> Signed-off-by: Mark Brown <broonie(a)kernel.org> --- sound/soc/codecs/tlv320aic32x4-clk.c | 34 ++++++++++++++++++++++++++++ sound/soc/codecs/tlv320aic32x4.c | 18 +++++++++++---- 2 files changed, 47 insertions(+), 5 deletions(-) diff --git a/sound/soc/codecs/tlv320aic32x4-clk.c b/sound/soc/codecs/tlv320aic32x4-clk.c index 5e495fc8d931..cded85009c8c 100644 --- a/sound/soc/codecs/tlv320aic32x4-clk.c +++ b/sound/soc/codecs/tlv320aic32x4-clk.c @@ -265,6 +265,30 @@ static const struct clk_ops aic32x4_pll_ops = { .get_parent = clk_aic32x4_pll_get_parent, }; +static int clk_aic32x4_codec_clkin_set_parent(struct clk_hw *hw, u8 index) +{ + struct clk_aic32x4 *mux = to_clk_aic32x4(hw); + + return regmap_update_bits(mux->regmap, + AIC32X4_CLKMUX, + AIC32X4_CODEC_CLKIN_MASK, index << AIC32X4_CODEC_CLKIN_SHIFT); +} + +static u8 clk_aic32x4_codec_clkin_get_parent(struct clk_hw *hw) +{ + struct clk_aic32x4 *mux = to_clk_aic32x4(hw); + unsigned int val; + + regmap_read(mux->regmap, AIC32X4_CLKMUX, &val); + + return (val & AIC32X4_CODEC_CLKIN_MASK) >> AIC32X4_CODEC_CLKIN_SHIFT; +} + +static const struct clk_ops aic32x4_codec_clkin_ops = { + .set_parent = clk_aic32x4_codec_clkin_set_parent, + .get_parent = clk_aic32x4_codec_clkin_get_parent, +}; + static struct aic32x4_clkdesc aic32x4_clkdesc_array[] = { { .name = "pll", @@ -274,6 +298,14 @@ static struct aic32x4_clkdesc aic32x4_clkdesc_array[] = { .ops = &aic32x4_pll_ops, .reg = 0, }, + { + .name = "codec_clkin", + .parent_names = + (const char *[]) { "mclk", "bclk", "gpio", "pll" }, + .num_parents = 4, + .ops = &aic32x4_codec_clkin_ops, + .reg = 0, + }, }; static struct clk *aic32x4_register_clk(struct device *dev, @@ -314,6 +346,8 @@ int aic32x4_register_clocks(struct device *dev, const char *mclk_name) */ aic32x4_clkdesc_array[0].parent_names = (const char* []) { mclk_name, "bclk", "gpio", "din" }; + aic32x4_clkdesc_array[1].parent_names = + (const char *[]) { mclk_name, "bclk", "gpio", "pll" }; for (i = 0; i < ARRAY_SIZE(aic32x4_clkdesc_array); ++i) aic32x4_register_clk(dev, &aic32x4_clkdesc_array[i]); diff --git a/sound/soc/codecs/tlv320aic32x4.c b/sound/soc/codecs/tlv320aic32x4.c index 7cf8c7cedfe1..5496e4e080f4 100644 --- a/sound/soc/codecs/tlv320aic32x4.c +++ b/sound/soc/codecs/tlv320aic32x4.c @@ -735,12 +735,9 @@ static int aic32x4_setup_clocks(struct snd_soc_component *component, aic32x4_set_processing_blocks(component, aic32x4_divs[i].r_block, aic32x4_divs[i].p_block); - /* PLL as CODEC_CLKIN */ - snd_soc_component_update_bits(component, AIC32X4_CLKMUX, - AIC32X4_CODEC_CLKIN_MASK, - AIC32X4_CODEC_CLKIN_PLL << AIC32X4_CODEC_CLKIN_SHIFT); /* DAC_MOD_CLK as BDIV_CLKIN */ - snd_soc_component_update_bits(component, AIC32X4_IFACE3, AIC32X4_BDIVCLK_MASK, + snd_soc_component_update_bits(component, AIC32X4_IFACE3, + AIC32X4_BDIVCLK_MASK, AIC32X4_DACMOD2BCLK << AIC32X4_BDIVCLK_SHIFT); /* NDAC divider value */ @@ -987,6 +984,15 @@ static int aic32x4_component_probe(struct snd_soc_component *component) { struct aic32x4_priv *aic32x4 = snd_soc_component_get_drvdata(component); u32 tmp_reg; + int ret; + + struct clk_bulk_data clocks[] = { + { .id = "codec_clkin" }, + }; + + ret = devm_clk_bulk_get(component->dev, ARRAY_SIZE(clocks), clocks); + if (ret) + return ret; if (gpio_is_valid(aic32x4->rstn_gpio)) { ndelay(10); @@ -999,6 +1005,8 @@ static int aic32x4_component_probe(struct snd_soc_component *component) if (aic32x4->setup) aic32x4_setup_gpios(component); + clk_set_parent(clocks[0].clk, clocks[1].clk); + /* Power platform configuration */ if (aic32x4->power_cfg & AIC32X4_PWR_MICBIAS_2075_LDOIN) { snd_soc_component_write(component, AIC32X4_MICBIAS, -- 2.20.1

7 8

[PATCH] ASoC: wm8994: Prevent access to invalid VU register bits on WM1811
by Sylwester Nawrocki 20 Nov '25

20 Nov '25

The ADC2 and DAC2 are not available on WM1811 device. This patch moves the ADC2, DAC2 VU bitfields to a separate array so we can skip accessing them and avoid unreadable register access on WM1811. This allows to get rid of warnings during boot like: wm8994-codec: ASoC: error at soc_component_read_no_lock on wm8994-codec: -5 Signed-off-by: Sylwester Nawrocki <s.nawrocki(a)samsung.com> --- sound/soc/codecs/wm8994.c | 60 ++++++++++++++++++++++++++++----------- 1 file changed, 44 insertions(+), 16 deletions(-) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index a84ae879d37e..038be667c1a6 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -43,10 +43,12 @@ #define WM8994_NUM_DRC 3 #define WM8994_NUM_EQ 3 -static struct { +struct wm8994_reg_mask { unsigned int reg; unsigned int mask; -} wm8994_vu_bits[] = { +}; + +static struct wm8994_reg_mask wm8994_vu_bits[] = { { WM8994_LEFT_LINE_INPUT_1_2_VOLUME, WM8994_IN1_VU }, { WM8994_RIGHT_LINE_INPUT_1_2_VOLUME, WM8994_IN1_VU }, { WM8994_LEFT_LINE_INPUT_3_4_VOLUME, WM8994_IN2_VU }, @@ -60,14 +62,10 @@ static struct { { WM8994_AIF1_DAC1_LEFT_VOLUME, WM8994_AIF1DAC1_VU }, { WM8994_AIF1_DAC1_RIGHT_VOLUME, WM8994_AIF1DAC1_VU }, - { WM8994_AIF1_DAC2_LEFT_VOLUME, WM8994_AIF1DAC2_VU }, - { WM8994_AIF1_DAC2_RIGHT_VOLUME, WM8994_AIF1DAC2_VU }, { WM8994_AIF2_DAC_LEFT_VOLUME, WM8994_AIF2DAC_VU }, { WM8994_AIF2_DAC_RIGHT_VOLUME, WM8994_AIF2DAC_VU }, { WM8994_AIF1_ADC1_LEFT_VOLUME, WM8994_AIF1ADC1_VU }, { WM8994_AIF1_ADC1_RIGHT_VOLUME, WM8994_AIF1ADC1_VU }, - { WM8994_AIF1_ADC2_LEFT_VOLUME, WM8994_AIF1ADC2_VU }, - { WM8994_AIF1_ADC2_RIGHT_VOLUME, WM8994_AIF1ADC2_VU }, { WM8994_AIF2_ADC_LEFT_VOLUME, WM8994_AIF2ADC_VU }, { WM8994_AIF2_ADC_RIGHT_VOLUME, WM8994_AIF1ADC2_VU }, { WM8994_DAC1_LEFT_VOLUME, WM8994_DAC1_VU }, @@ -76,6 +74,14 @@ static struct { { WM8994_DAC2_RIGHT_VOLUME, WM8994_DAC2_VU }, }; +/* VU bitfields for ADC2, DAC2 not available on WM1811 */ +static struct wm8994_reg_mask wm8994_adc2_dac2_vu_bits[] = { + { WM8994_AIF1_DAC2_LEFT_VOLUME, WM8994_AIF1DAC2_VU }, + { WM8994_AIF1_DAC2_RIGHT_VOLUME, WM8994_AIF1DAC2_VU }, + { WM8994_AIF1_ADC2_LEFT_VOLUME, WM8994_AIF1ADC2_VU }, + { WM8994_AIF1_ADC2_RIGHT_VOLUME, WM8994_AIF1ADC2_VU }, +}; + static int wm8994_drc_base[] = { WM8994_AIF1_DRC1_1, WM8994_AIF1_DRC2_1, @@ -1030,6 +1036,26 @@ static bool wm8994_check_class_w_digital(struct snd_soc_component *component) return true; } +static void wm8994_update_vu_bits(struct snd_soc_component *component) +{ + struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component); + struct wm8994 *control = wm8994->wm8994; + int i; + + for (i = 0; i < ARRAY_SIZE(wm8994_vu_bits); i++) + snd_soc_component_write(component, wm8994_vu_bits[i].reg, + snd_soc_component_read(component, + wm8994_vu_bits[i].reg)); + if (control->type == WM1811) + return; + + for (i = 0; i < ARRAY_SIZE(wm8994_adc2_dac2_vu_bits); i++) + snd_soc_component_write(component, + wm8994_adc2_dac2_vu_bits[i].reg, + snd_soc_component_read(component, + wm8994_adc2_dac2_vu_bits[i].reg)); +} + static int aif_mclk_set(struct snd_soc_component *component, int aif, bool enable) { struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component); @@ -1076,7 +1102,7 @@ static int aif1clk_ev(struct snd_soc_dapm_widget *w, struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component); struct wm8994 *control = wm8994->wm8994; int mask = WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC1R_ENA; - int ret, i; + int ret; int dac; int adc; int val; @@ -1144,10 +1170,7 @@ static int aif1clk_ev(struct snd_soc_dapm_widget *w, break; case SND_SOC_DAPM_POST_PMU: - for (i = 0; i < ARRAY_SIZE(wm8994_vu_bits); i++) - snd_soc_component_write(component, wm8994_vu_bits[i].reg, - snd_soc_component_read(component, - wm8994_vu_bits[i].reg)); + wm8994_update_vu_bits(component); break; case SND_SOC_DAPM_PRE_PMD: @@ -1181,7 +1204,7 @@ static int aif2clk_ev(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); - int ret, i; + int ret; int dac; int adc; int val; @@ -1237,10 +1260,7 @@ static int aif2clk_ev(struct snd_soc_dapm_widget *w, break; case SND_SOC_DAPM_POST_PMU: - for (i = 0; i < ARRAY_SIZE(wm8994_vu_bits); i++) - snd_soc_component_write(component, wm8994_vu_bits[i].reg, - snd_soc_component_read(component, - wm8994_vu_bits[i].reg)); + wm8994_update_vu_bits(component); break; case SND_SOC_DAPM_PRE_PMD: @@ -4346,6 +4366,14 @@ static int wm8994_component_probe(struct snd_soc_component *component) wm8994_vu_bits[i].mask, wm8994_vu_bits[i].mask); + if (control->type != WM1811) { + for (i = 0; i < ARRAY_SIZE(wm8994_adc2_dac2_vu_bits); i++) + snd_soc_component_update_bits(component, + wm8994_adc2_dac2_vu_bits[i].reg, + wm8994_adc2_dac2_vu_bits[i].mask, + wm8994_adc2_dac2_vu_bits[i].mask); + } + /* Set the low bit of the 3D stereo depth so TLV matches */ snd_soc_component_update_bits(component, WM8994_AIF1_DAC1_FILTERS_2, 1 << WM8994_AIF1DAC1_3D_GAIN_SHIFT, -- 2.17.1

4 3

[PATCH] MAINTAINERS: update Tzung-Bi's email address
by Tzung-Bi Shih 11 Nov '25

11 Nov '25

Use kernel.org account instead. Signed-off-by: Tzung-Bi Shih <tzungbi(a)kernel.org> --- .../devicetree/bindings/sound/google,cros-ec-codec.yaml | 2 +- Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml | 2 +- MAINTAINERS | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml index c3e9f3485449..dea293f403d9 100644 --- a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml +++ b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml @@ -8,7 +8,7 @@ title: Audio codec controlled by ChromeOS EC maintainers: - Cheng-Yi Chiang <cychiang(a)chromium.org> - - Tzung-Bi Shih <tzungbi(a)google.com> + - Tzung-Bi Shih <tzungbi(a)kernel.org> description: | Google's ChromeOS EC codec is a digital mic codec provided by the diff --git a/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml b/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml index 1d73204451b1..ea7d4900ee4a 100644 --- a/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml +++ b/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Realtek rt1015p codec devicetree bindings maintainers: - - Tzung-Bi Shih <tzungbi(a)google.com> + - Tzung-Bi Shih <tzungbi(a)kernel.org> description: | Rt1015p is a rt1015 variant which does not support I2C and diff --git a/MAINTAINERS b/MAINTAINERS index cf0f18502372..f9749afc0b9d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4906,7 +4906,7 @@ F: drivers/platform/chrome/ CHROMEOS EC CODEC DRIVER M: Cheng-Yi Chiang <cychiang(a)chromium.org> -M: Tzung-Bi Shih <tzungbi(a)google.com> +M: Tzung-Bi Shih <tzungbi(a)kernel.org> R: Guenter Roeck <groeck(a)chromium.org> L: chrome-platform(a)lists.linux.dev S: Maintained -- 2.38.0.135.g90850a2211-goog

3 3

[alsa-devel] MOTU Midi Express XT
by holger＠dehnhardt.org 06 Nov '25

06 Nov '25

I own a MOTU Midi Express XT 8x8 interface which is connected through the parallel port. Recently I upgraded my system and the new motherboard does not have an ISA parallel port anymore... So I bought a PCI parallel port extension card - hoping that it will work with the ALSA driver (mtpav). So I changed the interrupt an port address in modules.conf but the driver is no longer recognized as an ALSA driver even though it loads without errors. As the device still perfectly fits my needs I would like to modify the driver to get it working again. Can anyone give me advice what should be changed in the drivers code to make it work on a pci port? Thanks Holger

3 12

[PATCH v1] slimbus: qcom-ngd-ctrl: Add stream disable support
by Viken Dadhaniya 24 Sep '25

24 Sep '25

Currently slimbus driver doesn't support stream disable callback, it only supports stream enable callback. In slimbus usecase, client is switching to new frequency with same channel and calling enable stream callback for new frequency but DSP subsystem is crashing as we are switching to new frequency with same channel without disabling stream for older frequency. Ideally, before switching to another frequency, client should call disable stream callback and then enable stream for newer frequency. Hence add support to disable stream via qcom_slim_ngd_disable_stream(). Signed-off-by: Viken Dadhaniya <quic_vdadhani(a)quicinc.com> --- drivers/slimbus/qcom-ngd-ctrl.c | 70 +++++++++++++++++++++++++++++++++ drivers/slimbus/slimbus.h | 13 ++++++ 2 files changed, 83 insertions(+) diff --git a/drivers/slimbus/qcom-ngd-ctrl.c b/drivers/slimbus/qcom-ngd-ctrl.c index e0b21f0f79c1..d952827d2e12 100644 --- a/drivers/slimbus/qcom-ngd-ctrl.c +++ b/drivers/slimbus/qcom-ngd-ctrl.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 // Copyright (c) 2011-2017, The Linux Foundation. All rights reserved. // Copyright (c) 2018, Linaro Limited +// Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. #include <linux/irq.h> #include <linux/kernel.h> @@ -1084,6 +1085,74 @@ static int qcom_slim_ngd_enable_stream(struct slim_stream_runtime *rt) return ret; } +static int qcom_slim_ngd_disable_stream(struct slim_stream_runtime *rt) +{ + struct slim_device *sdev = rt->dev; + struct slim_controller *ctrl = sdev->ctrl; + struct slim_val_inf msg = {0}; + u8 wbuf[SLIM_MSGQ_BUF_LEN]; + u8 rbuf[SLIM_MSGQ_BUF_LEN]; + struct slim_msg_txn txn = {0,}; + int i, ret; + + txn.mt = SLIM_MSG_MT_DEST_REFERRED_USER; + txn.dt = SLIM_MSG_DEST_LOGICALADDR; + txn.la = SLIM_LA_MGR; + txn.ec = 0; + txn.msg = &msg; + txn.msg->num_bytes = 0; + txn.msg->wbuf = wbuf; + txn.msg->rbuf = rbuf; + + for (i = 0; i < rt->num_ports; i++) { + struct slim_port *port = &rt->ports[i]; + + if (txn.msg->num_bytes == 0) { + wbuf[txn.msg->num_bytes++] = (u8)(SLIM_CH_REMOVE << 6) + | (sdev->laddr & 0x1f); + + ret = slim_alloc_txn_tid(ctrl, &txn); + if (ret) { + dev_err(&sdev->dev, "Fail to allocate TID\n"); + return -ENXIO; + } + wbuf[txn.msg->num_bytes++] = txn.tid; + } + wbuf[txn.msg->num_bytes++] = port->ch.id; + } + + txn.mc = SLIM_USR_MC_CHAN_CTRL; + txn.rl = txn.msg->num_bytes + 4; + ret = qcom_slim_ngd_xfer_msg_sync(ctrl, &txn); + if (ret) { + slim_free_txn_tid(ctrl, &txn); + dev_err(&sdev->dev, "TX timed out:MC:0x%x,mt:0x%x ret:%d\n", + txn.mc, txn.mt, ret); + return ret; + } + + txn.mc = SLIM_USR_MC_RECONFIG_NOW; + txn.msg->num_bytes = 2; + wbuf[1] = sdev->laddr; + txn.rl = txn.msg->num_bytes + 4; + + ret = slim_alloc_txn_tid(ctrl, &txn); + if (ret) { + dev_err(ctrl->dev, "Fail to allocate TID ret:%d\n", ret); + return ret; + } + + wbuf[0] = txn.tid; + ret = qcom_slim_ngd_xfer_msg_sync(ctrl, &txn); + if (ret) { + slim_free_txn_tid(ctrl, &txn); + dev_err(&sdev->dev, "TX timed out:MC:0x%x,mt:0x%x ret:%d\n", + txn.mc, txn.mt, ret); + } + + return ret; +} + static int qcom_slim_ngd_get_laddr(struct slim_controller *ctrl, struct slim_eaddr *ea, u8 *laddr) { @@ -1642,6 +1711,7 @@ static int qcom_slim_ngd_ctrl_probe(struct platform_device *pdev) ctrl->ctrl.clkgear = SLIM_MAX_CLK_GEAR; ctrl->ctrl.get_laddr = qcom_slim_ngd_get_laddr; ctrl->ctrl.enable_stream = qcom_slim_ngd_enable_stream; + ctrl->ctrl.disable_stream = qcom_slim_ngd_disable_stream; ctrl->ctrl.xfer_msg = qcom_slim_ngd_xfer_msg; ctrl->ctrl.wakeup = NULL; ctrl->state = QCOM_SLIM_NGD_CTRL_DOWN; diff --git a/drivers/slimbus/slimbus.h b/drivers/slimbus/slimbus.h index 00a7f112574b..21543d125614 100644 --- a/drivers/slimbus/slimbus.h +++ b/drivers/slimbus/slimbus.h @@ -1,6 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (c) 2011-2017, The Linux Foundation + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. */ #ifndef _DRIVERS_SLIMBUS_H @@ -316,6 +317,18 @@ enum slim_transport_protocol { SLIM_PROTO_EXT_HALF_DUP, }; +/* + * enum slim_ch_control: Channel control. + * Activate will schedule channel and/or group of channels in the TDM frame. + * Suspend will keep the schedule but data-transfer won't happen. + * Remove will remove the channel/group from the TDM frame. + */ +enum slim_ch_control { + SLIM_CH_ACTIVATE, + SLIM_CH_SUSPEND, + SLIM_CH_REMOVE, +}; + /** * struct slim_stream_runtime - SLIMbus stream runtime instance * -- 2.17.1

2 2

retire_capture_urb: Corrected urb data len
by Sean Anderson 01 Aug '25

01 Aug '25

Hi all, I have a "FiiO DigiHug USB Audio" sound card (1852:7022) [3]. I have had no problems with the audio, but I did notice a large number of message like retire_capture_urb: 4992 callbacks suppressed in my dmesg [1]. This is caused by the "Corrected urb data len." warning. The patch adding this warning [2] makes it seem like this warning should be an uncommon occurance. However, based on the number of suppressed callbacks, this seems to be happening at a rate of around 500 Hz. Is this buggy hardware? Or is this a bug in the driver? Does there need to be a quirk? Or perhaps the warning above should be a debug instead? I'm using 5.15.0-46-generic. I know, I know; this is a vendor kernel. However, I went through the commits for sound/usb/pcm.c and didn't see any major differences. I also previously saw this issue on 5.4, so this probably isn't a regression. --Sean [1] I would have liked to post the actual message, but I was unable to figure out how to disable ratelimiting. I tried setting /proc/sys/kernel/printk_ratelimit to 0, /proc/sys/kernel/printk_ratelimit_burst to 5000, and /proc/sys/kernel/printk to 8. However, nothing seemed to have any effect (except that the callbacks suppressed messages were disabled). I find this very strange, given that the callbacks suppressed message uses KERN_WARN, and so does dev_warn_ratelimited. [2] https://lore.kernel.org/all/4B28A659.6070303@ladisch.de/T/ [3] Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x1852 GYROCOM C&C Co., LTD idProduct 0x7022 bcdDevice 0.01 iManufacturer 1 FiiO iProduct 2 DigiHug USB Audio iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0182 bNumInterfaces 4 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.00 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 58 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0012 1x 18 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 1 Control Device bInterfaceProtocol 0 iInterface 3 FiiO USB DAC-E10 AudioControl Interface Descriptor: bLength 10 bDescriptorType 36 bDescriptorSubtype 1 (HEADER) bcdADC 1.00 wTotalLength 0x003e bInCollection 2 baInterfaceNr(0) 2 baInterfaceNr(1) 3 AudioControl Interface Descriptor: bLength 12 bDescriptorType 36 bDescriptorSubtype 2 (INPUT_TERMINAL) bTerminalID 5 wTerminalType 0x0605 SPDIF interface bAssocTerminal 0 bNrChannels 2 wChannelConfig 0x0003 Left Front (L) Right Front (R) iChannelNames 0 iTerminal 0 AudioControl Interface Descriptor: bLength 12 bDescriptorType 36 bDescriptorSubtype 2 (INPUT_TERMINAL) bTerminalID 9 wTerminalType 0x0101 USB Streaming bAssocTerminal 0 bNrChannels 2 wChannelConfig 0x0003 Left Front (L) Right Front (R) iChannelNames 0 iTerminal 0 AudioControl Interface Descriptor: bLength 9 bDescriptorType 36 bDescriptorSubtype 3 (OUTPUT_TERMINAL) bTerminalID 3 wTerminalType 0x0605 SPDIF interface bAssocTerminal 0 bSourceID 16 iTerminal 0 AudioControl Interface Descriptor: bLength 9 bDescriptorType 36 bDescriptorSubtype 3 (OUTPUT_TERMINAL) bTerminalID 7 wTerminalType 0x0101 USB Streaming bAssocTerminal 0 bSourceID 5 iTerminal 0 AudioControl Interface Descriptor: bLength 10 bDescriptorType 36 bDescriptorSubtype 6 (FEATURE_UNIT) bUnitID 16 bSourceID 9 bControlSize 1 bmaControls(0) 0x01 Mute Control bmaControls(1) 0x02 Volume Control bmaControls(2) 0x02 Volume Control iFeature 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 7 bDelay 0 frames wFormatTag 0x0001 PCM AudioStreaming Interface Descriptor: bLength 26 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 2 bSubframeSize 2 bBitResolution 16 bSamFreqType 6 Discrete tSamFreq[ 0] 8000 tSamFreq[ 1] 16000 tSamFreq[ 2] 32000 tSamFreq[ 3] 44100 tSamFreq[ 4] 48000 tSamFreq[ 5] 96000 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 9 Transfer Type Isochronous Synch Type Adaptive Usage Type Data wMaxPacketSize 0x0184 1x 388 bytes bInterval 1 bRefresh 0 bSynchAddress 0 AudioStreaming Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 2 Decoded PCM samples wLockDelay 0x0002 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 2 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 7 bDelay 0 frames wFormatTag 0x0001 PCM AudioStreaming Interface Descriptor: bLength 26 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 2 bSubframeSize 3 bBitResolution 24 bSamFreqType 6 Discrete tSamFreq[ 0] 8000 tSamFreq[ 1] 16000 tSamFreq[ 2] 32000 tSamFreq[ 3] 44100 tSamFreq[ 4] 48000 tSamFreq[ 5] 96000 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 9 Transfer Type Isochronous Synch Type Adaptive Usage Type Data wMaxPacketSize 0x0246 1x 582 bytes bInterval 1 bRefresh 0 bSynchAddress 0 AudioStreaming Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 2 Decoded PCM samples wLockDelay 0x0002 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 9 bDelay 0 frames wFormatTag 0x0001 PCM AudioStreaming Interface Descriptor: bLength 20 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 2 bSubframeSize 2 bBitResolution 16 bSamFreqType 4 Discrete tSamFreq[ 0] 32000 tSamFreq[ 1] 44100 tSamFreq[ 2] 48000 tSamFreq[ 3] 96000 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 9 Transfer Type Isochronous Synch Type Adaptive Usage Type Data wMaxPacketSize 0x0184 1x 388 bytes bInterval 1 bRefresh 0 bSynchAddress 0 AudioStreaming Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 2 Decoded PCM samples wLockDelay 0x0002 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 2 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 9 bDelay 0 frames wFormatTag 0x0001 PCM AudioStreaming Interface Descriptor: bLength 20 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 2 bSubframeSize 3 bBitResolution 24 bSamFreqType 4 Discrete tSamFreq[ 0] 32000 tSamFreq[ 1] 44100 tSamFreq[ 2] 48000 tSamFreq[ 3] 96000 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 9 Transfer Type Isochronous Synch Type Adaptive Usage Type Data wMaxPacketSize 0x0246 1x 582 bytes bInterval 1 bRefresh 0 bSynchAddress 0 AudioStreaming Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 2 Decoded PCM samples wLockDelay 0x0002 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 3 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 9 bDelay 0 frames wFormatTag 0x2001 IEC1937_AC-3 AudioStreaming Interface Descriptor: bLength 11 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 3 (FORMAT_TYPE_III) bNrChannels 2 bSubframeSize 2 bBitResolution 16 bSamFreqType 1 Discrete tSamFreq[ 0] 48000 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 9 Transfer Type Isochronous Synch Type Adaptive Usage Type Data wMaxPacketSize 0x00c0 1x 192 bytes bInterval 1 bRefresh 0 bSynchAddress 0 AudioStreaming Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 2 Decoded PCM samples wLockDelay 0x0002 can't get debug descriptor: Resource temporarily unavailable Device Status: 0x0000 (Bus Powered)

2 8

[PATCH] ASoC: qcom: x1e80100: Support boards with two speakers
by Krzysztof Kozlowski 17 Jul '25

17 Jul '25

Some Qualcomm X1E laptops have only two speakers. Regardless whether this sound card driver is suitable for them (we could re-use one for some older SoC), we should set reasonable channel map depending on the number of channels, not always 4-speaker setup. This change is necessary for bringing audio support on Lenovo Thinkpad T14s with Qualcomm X1E78100 and only two speakers. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- sound/soc/qcom/x1e80100.c | 40 ++++++++++++++++++++++++++++++++++----- 1 file changed, 35 insertions(+), 5 deletions(-) diff --git a/sound/soc/qcom/x1e80100.c b/sound/soc/qcom/x1e80100.c index 898b5c26bf1e..8eb57fc12f0d 100644 --- a/sound/soc/qcom/x1e80100.c +++ b/sound/soc/qcom/x1e80100.c @@ -95,23 +95,53 @@ static int x1e80100_snd_hw_params(struct snd_pcm_substream *substream, return qcom_snd_sdw_hw_params(substream, params, &data->sruntime[cpu_dai->id]); } +static int x1e80100_snd_hw_map_channels(unsigned int *ch_map, int num) +{ + switch (num) { + case 1: + ch_map[0] = PCM_CHANNEL_FC; + break; + case 2: + ch_map[0] = PCM_CHANNEL_FL; + ch_map[1] = PCM_CHANNEL_FR; + break; + case 3: + ch_map[0] = PCM_CHANNEL_FL; + ch_map[1] = PCM_CHANNEL_FR; + ch_map[2] = PCM_CHANNEL_FC; + break; + case 4: + ch_map[0] = PCM_CHANNEL_FL; + ch_map[1] = PCM_CHANNEL_LB; + ch_map[2] = PCM_CHANNEL_FR; + ch_map[3] = PCM_CHANNEL_RB; + break; + default: + return -EINVAL; + } + + return 0; +} + static int x1e80100_snd_prepare(struct snd_pcm_substream *substream) { struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream); struct snd_soc_dai *cpu_dai = snd_soc_rtd_to_cpu(rtd, 0); struct x1e80100_snd_data *data = snd_soc_card_get_drvdata(rtd->card); struct sdw_stream_runtime *sruntime = data->sruntime[cpu_dai->id]; - const unsigned int rx_slot[4] = { PCM_CHANNEL_FL, - PCM_CHANNEL_LB, - PCM_CHANNEL_FR, - PCM_CHANNEL_RB }; + unsigned int channels = substream->runtime->channels; + unsigned int rx_slot[4]; int ret; switch (cpu_dai->id) { case WSA_CODEC_DMA_RX_0: case WSA_CODEC_DMA_RX_1: + ret = x1e80100_snd_hw_map_channels(rx_slot, channels); + if (ret) + return ret; + ret = snd_soc_dai_set_channel_map(cpu_dai, 0, NULL, - ARRAY_SIZE(rx_slot), rx_slot); + channels, rx_slot); if (ret) return ret; break; -- 2.43.0

3 2

[alsa-devel] ASoC TDM channel re-mapping
by Edward Cragg 17 Jun '25

17 Jun '25

Hi, We have an ASoC driver in which we have added support for TDM over an I2S interface. We would like to have the capability of re-mapping the channel ordering, for which i know there is a callback in place to start this process, set_channel_map. The only backend implementation of this is using the ALSA API and the .copy handler in an ALSA PCM driver to mutate data copied out of ALSA before it's DMA'd to hardware. This is in sound/soc/blackfin/bf5xx-i2s-pcm.c The problem we have is that the driver we're using currently uses a dmaengine based PCM driver, and i'm not sure whether this is compatible with using the .copy callback, without reimplementing the driver entirely as an ALSA PCM driver. Since there aren't very many examples in mainline, I was hoping to ask for advice for the best way of doing this. I wondered: - Would it be possible to add a functional copy callback using a dmaengine based PCM driver? - Otherwise, would there be a good way to implement channel remapping in a TDM frame using the dmaengine based PCM driver? or - Would the best way indeed be to reimplement the PCM driver as a normal ALSA PCM driver? Thanks, Ed Cragg

2 2

[PATCH] ASoC: qcom: soundwire: Add support for controlling audio CGCR from HLOS
by Srinivasa Rao Mandadapu 17 Jun '25

17 Jun '25

Add support for controlling soundwire audio CGCR interface using clock framework to make hclk ungating with software. As per new hardware changes, software has to always ungate hclk if soundwire is operational and keep it running. This requirement is for latest LPASS chipsets for RX, TX and WSA path to work. Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam(a)quicinc.com> Co-developed-by: Venkata Prasad Potturu <quic_potturu(a)quicinc.com> Signed-off-by: Venkata Prasad Potturu <quic_potturu(a)quicinc.com> --- This patch set depends on: -- Clock driver patches with reset control support, yet to be posted. drivers/soundwire/qcom.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index fb183bd..440aad8 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -12,6 +12,7 @@ #include <linux/of_irq.h> #include <linux/of_device.h> #include <linux/regmap.h> +#include <linux/reset.h> #include <linux/slab.h> #include <linux/slimbus.h> #include <linux/soundwire/sdw.h> @@ -129,6 +130,7 @@ struct qcom_swrm_ctrl { struct device *dev; struct regmap *regmap; void __iomem *mmio; + struct reset_control *audio_cgcr; #ifdef CONFIG_DEBUG_FS struct dentry *debugfs; #endif @@ -618,6 +620,8 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl) val = FIELD_PREP(SWRM_MCP_FRAME_CTRL_BANK_ROW_CTRL_BMSK, ctrl->rows_index); val |= FIELD_PREP(SWRM_MCP_FRAME_CTRL_BANK_COL_CTRL_BMSK, ctrl->cols_index); + reset_control_reset(ctrl->audio_cgcr); + ctrl->reg_write(ctrl, SWRM_MCP_FRAME_CTRL_BANK_ADDR(0), val); /* Enable Auto enumeration */ @@ -1269,6 +1273,9 @@ static int qcom_swrm_probe(struct platform_device *pdev) ctrl->bus.ops = &qcom_swrm_ops; ctrl->bus.port_ops = &qcom_swrm_port_ops; ctrl->bus.compute_params = &qcom_swrm_compute_params; + ctrl->audio_cgcr = devm_reset_control_get_exclusive(dev, "swr_audio_cgcr"); + if (IS_ERR(ctrl->audio_cgcr)) + dev_err(dev, "Failed to get audio_cgcr reset required for soundwire-v1.6.0\n"); ret = qcom_swrm_get_port_config(ctrl); if (ret) -- 2.7.4

2 3

[PATCH] ASoC: amd: acp: Fix support for a Huawei Matebook laptop
by Marian Postevca 17 Jun '25

17 Jun '25

Previous commit that added support for Huawei MateBook D16 2021 with Ryzen 4600H (HVY-WXX9 M1010) was incomplete. To activate support for this laptop, the DMI table in acp3x-es83xx machine driver must also be updated. Fixes: b5338b1b901e ("ASoC: amd: acp: Add support for a new Huawei Matebook laptop") Signed-off-by: Marian Postevca <posteuca(a)mutex.one> --- sound/soc/amd/acp/acp3x-es83xx/acp3x-es83xx.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/sound/soc/amd/acp/acp3x-es83xx/acp3x-es83xx.c b/sound/soc/amd/acp/acp3x-es83xx/acp3x-es83xx.c index f85b85ea4be9..2b0aa270a3e9 100644 --- a/sound/soc/amd/acp/acp3x-es83xx/acp3x-es83xx.c +++ b/sound/soc/amd/acp/acp3x-es83xx/acp3x-es83xx.c @@ -354,6 +354,14 @@ static const struct dmi_system_id acp3x_es83xx_dmi_table[] = { }, .driver_data = (void *)(ES83XX_ENABLE_DMIC|ES83XX_48_MHZ_MCLK), }, + { + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "HUAWEI"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "HVY-WXX9"), + DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "M1010"), + }, + .driver_data = (void *)(ES83XX_ENABLE_DMIC), + }, { .matches = { DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "HUAWEI"), -- 2.43.0

2 1

[PATCH v3 0/5] Add DisplayPort sound support for Fairphone 5 smartphone
by Luca Weiss 09 Jun '25

09 Jun '25

Add the necessary sound card bits and some dts additions to enable sound over DisplayPort-over-USB-C, e.g. to a connected TV or monitor. The UCM files can be found here: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/tree/master/device/… This series - in spirit - depends on the series enabling DisplayPort in the first place, but can land pretty independently, especially the ASoC bits: https://lore.kernel.org/linux-arm-msm/20250312-fp5-pmic-glink-dp-v2-0-a5592… Signed-off-by: Luca Weiss <luca.weiss(a)fairphone.com> --- Changes in v3: - Simplify return qcom_snd_wcd_jack_setup in machine driver - Pick up tags - Link to v2: https://lore.kernel.org/r/20250418-fp5-dp-sound-v2-0-05d65f084b05@fairphone… Changes in v2: - Revamp series based on comments on v1, doesn't have much too much in common anymore - Use sm8250 instead of sc8280xp sndcard file, so port other required changes from sc8280xp.c to sm8250.c - This also changes the sound card compatible to from qcom,qcm6490-sndcard to fairphone,fp5-sndcard - Link to v1: https://lore.kernel.org/r/20240809-fp5-dp-sound-v1-0-d7ba2c24f6b9@fairphone… --- Luca Weiss (5): ASoC: dt-bindings: qcom,sm8250: Add Fairphone 5 sound card ASoC: qcom: sm8250: set card driver name from match data ASoC: qcom: sm8250: add DisplayPort Jack support ASoC: qcom: sm8250: Add Fairphone 5 soundcard compatible arm64: dts: qcom: qcm6490-fairphone-fp5: Add DisplayPort sound support .../devicetree/bindings/sound/qcom,sm8250.yaml | 1 + arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts | 31 ++++++++++++++++++++++ sound/soc/qcom/sm8250.c | 27 ++++++++++--------- 3 files changed, 47 insertions(+), 12 deletions(-) --- base-commit: 7f1dd4e6634d085f3c9652d4e0f1903659fb96f9 change-id: 20240809-fp5-dp-sound-b3768f3019bd Best regards, -- Luca Weiss <luca.weiss(a)fairphone.com>

6 16

[PATCH 0/1] Swapped l/r channels on ThinkBook 13x Gen4
by MadEnvel 28 May '25

28 May '25

Earlier commits introduced audio support for Lenovo ThinBook 13x Gen 4 that needed a patch due to missing _DSD config. Unfortunately, it looks like the left and right channels in the config are swapped. This patch fixes channel assignment. Tested on Lenovo ThinkBook 13x Gen4. MadEnvel (1): Fix swapped left and right channels for Lenovo ThinBook 13x Gen4 sound sound/pci/hda/cs35l41_hda_property.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) -- 2.45.2

4 4

[PATCH v2] ASoC: amd: use new ACP dev names for DAI links
by Brady Norander 20 May '25

20 May '25

On AMD SoC platforms with an ACP2x gpu ip block (such as stoneyridge), the amdgpu driver will create several platform devices for the ACP ASoC driver to communicate with the ACP hardware block on the gpu. These platform devices include dma for audio and one or multiple i2s interfaces. The amdgpu driver has always created these platform devices with automatic ids. The ASoC machine drives hardcode the platform device name. This creates an issue where if the ACP platform devices are not the first to be created, the ids can be different to what the machine drivers expect, causing them to not find the ACP platform devices and failing to load. Switch to using static ids for these ACP platform devices so that the names never change. Depends on patch: drm/amdgpu: use static ids for ACP platform devs [1] [1] https://lore.kernel.org/all/20250325210517.2097188-1-bradynorander@gmail.co… Signed-off-by: Brady Norander <bradynorander(a)gmail.com> --- v2: rewrite commit message to better describe the issue --- sound/soc/amd/acp-da7219-max98357a.c | 8 ++++---- sound/soc/amd/acp-es8336.c | 4 ++-- sound/soc/amd/acp-rt5645.c | 6 +++--- 3 files changed, 9 insertions(+), 9 deletions(-) diff --git a/sound/soc/amd/acp-da7219-max98357a.c b/sound/soc/amd/acp-da7219-max98357a.c index 02b04f355ca6..42aa009c4e13 100644 --- a/sound/soc/amd/acp-da7219-max98357a.c +++ b/sound/soc/amd/acp-da7219-max98357a.c @@ -517,11 +517,11 @@ static const struct snd_soc_ops cz_rt5682_dmic1_cap_ops = { }; SND_SOC_DAILINK_DEF(designware1, - DAILINK_COMP_ARRAY(COMP_CPU("designware-i2s.1.auto"))); + DAILINK_COMP_ARRAY(COMP_CPU("designware-i2s.1"))); SND_SOC_DAILINK_DEF(designware2, - DAILINK_COMP_ARRAY(COMP_CPU("designware-i2s.2.auto"))); + DAILINK_COMP_ARRAY(COMP_CPU("designware-i2s.2"))); SND_SOC_DAILINK_DEF(designware3, - DAILINK_COMP_ARRAY(COMP_CPU("designware-i2s.3.auto"))); + DAILINK_COMP_ARRAY(COMP_CPU("designware-i2s.3"))); SND_SOC_DAILINK_DEF(dlgs, DAILINK_COMP_ARRAY(COMP_CODEC("i2c-DLGS7219:00", "da7219-hifi"))); @@ -533,7 +533,7 @@ SND_SOC_DAILINK_DEF(adau, DAILINK_COMP_ARRAY(COMP_CODEC("ADAU7002:00", "adau7002-hifi"))); SND_SOC_DAILINK_DEF(platform, - DAILINK_COMP_ARRAY(COMP_PLATFORM("acp_audio_dma.0.auto"))); + DAILINK_COMP_ARRAY(COMP_PLATFORM("acp_audio_dma.0"))); static struct snd_soc_dai_link cz_dai_7219_98357[] = { { diff --git a/sound/soc/amd/acp-es8336.c b/sound/soc/amd/acp-es8336.c index 0193b3eae7a6..b16dde0e2987 100644 --- a/sound/soc/amd/acp-es8336.c +++ b/sound/soc/amd/acp-es8336.c @@ -137,11 +137,11 @@ static const struct snd_soc_ops st_es8336_ops = { }; SND_SOC_DAILINK_DEF(designware1, - DAILINK_COMP_ARRAY(COMP_CPU("designware-i2s.2.auto"))); + DAILINK_COMP_ARRAY(COMP_CPU("designware-i2s.1"))); SND_SOC_DAILINK_DEF(codec, DAILINK_COMP_ARRAY(COMP_CODEC("i2c-ESSX8336:00", "ES8316 HiFi"))); SND_SOC_DAILINK_DEF(platform, - DAILINK_COMP_ARRAY(COMP_PLATFORM("acp_audio_dma.1.auto"))); + DAILINK_COMP_ARRAY(COMP_PLATFORM("acp_audio_dma.0"))); static struct snd_soc_dai_link st_dai_es8336[] = { { diff --git a/sound/soc/amd/acp-rt5645.c b/sound/soc/amd/acp-rt5645.c index 72ddad24dbda..11d373169380 100644 --- a/sound/soc/amd/acp-rt5645.c +++ b/sound/soc/amd/acp-rt5645.c @@ -108,15 +108,15 @@ static const struct snd_soc_ops cz_aif1_ops = { }; SND_SOC_DAILINK_DEF(designware1, - DAILINK_COMP_ARRAY(COMP_CPU("designware-i2s.1.auto"))); + DAILINK_COMP_ARRAY(COMP_CPU("designware-i2s.1"))); SND_SOC_DAILINK_DEF(designware2, - DAILINK_COMP_ARRAY(COMP_CPU("designware-i2s.2.auto"))); + DAILINK_COMP_ARRAY(COMP_CPU("designware-i2s.2"))); SND_SOC_DAILINK_DEF(codec, DAILINK_COMP_ARRAY(COMP_CODEC("i2c-10EC5650:00", "rt5645-aif1"))); SND_SOC_DAILINK_DEF(platform, - DAILINK_COMP_ARRAY(COMP_PLATFORM("acp_audio_dma.0.auto"))); + DAILINK_COMP_ARRAY(COMP_PLATFORM("acp_audio_dma.0"))); static struct snd_soc_dai_link cz_dai_rt5650[] = { { -- 2.49.0

2 2

[PATCH 1/1] bat: Fix buffer time configuration
by Alexander Stein 16 May '25

16 May '25

By swapping time configuration some hardware constraints can be supported. Fixes the error: Set parameter to device error: buffer time: 500000 hw:tqmtlv320aic32: Invalid argument(-22) Signed-off-by: Alexander Stein <alexander.stein(a)ew.tq-group.com> --- Our common 'alsabat -Dhw:tqmtlv320aic32 -f S16_LE -c 2 -r 44100 -F 997:500' failed ona i.MX95 based platform, while it worked flawlessly on others, e.g. i.MX8M Plus. Upon searching I stumbled across [1], which this patch is inspired/based on. [1] https://github.com/arkq/bluez-alsa/pull/290/commits/da78b82ff77310093b4b4a9… --- bat/alsa.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/bat/alsa.c b/bat/alsa.c index 67489c4..457e79a 100644 --- a/bat/alsa.c +++ b/bat/alsa.c @@ -221,23 +221,23 @@ static int set_snd_pcm_params(struct bat *bat, struct pcm_container *sndpcm) period_time = buffer_time / DIV_BUFFERTIME; - /* Set buffer time and period time */ - err = snd_pcm_hw_params_set_buffer_time_near(sndpcm->handle, - params, &buffer_time, 0); + /* Set period time and buffer time */ + err = snd_pcm_hw_params_set_period_time_near(sndpcm->handle, + params, &period_time, 0); if (err < 0) { fprintf(bat->err, _("Set parameter to device error: ")); - fprintf(bat->err, _("buffer time: %d %s: %s(%d)\n"), - buffer_time, + fprintf(bat->err, _("period time: %d %s: %s(%d)\n"), + period_time, device_name, snd_strerror(err), err); return err; } - err = snd_pcm_hw_params_set_period_time_near(sndpcm->handle, - params, &period_time, 0); + err = snd_pcm_hw_params_set_buffer_time_near(sndpcm->handle, + params, &buffer_time, 0); if (err < 0) { fprintf(bat->err, _("Set parameter to device error: ")); - fprintf(bat->err, _("period time: %d %s: %s(%d)\n"), - period_time, + fprintf(bat->err, _("buffer time: %d %s: %s(%d)\n"), + buffer_time, device_name, snd_strerror(err), err); return err; } -- 2.43.0

2 2

[PATCH 1/3] ASoC: amd: acp: Fix NULL pointer deref on acp resume path
by Venkata Prasad Potturu 02 May '25

02 May '25

update chip data using dev_get_drvdata(dev->parent) instead of dev_get_platdata(dev). BUG: kernel NULL pointer dereference, address: 0000000000000010 Call Trace: <TASK> ? __pfx_platform_pm_resume+0x10/0x10 platform_pm_resume+0x28/0x60 dpm_run_callback+0x51/0x1a0 device_resume+0x1a6/0x2b0 dpm_resume+0x168/0x230 Fixes: e3933683b25e ("ASoC: amd: acp: Remove redundant acp_dev_data structure") Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu(a)amd.com> --- sound/soc/amd/acp/acp-rembrandt.c | 2 +- sound/soc/amd/acp/acp-renoir.c | 2 +- sound/soc/amd/acp/acp63.c | 2 +- sound/soc/amd/acp/acp70.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/soc/amd/acp/acp-rembrandt.c b/sound/soc/amd/acp/acp-rembrandt.c index 746b6ed72029..cccdd10c345e 100644 --- a/sound/soc/amd/acp/acp-rembrandt.c +++ b/sound/soc/amd/acp/acp-rembrandt.c @@ -199,7 +199,7 @@ static void rembrandt_audio_remove(struct platform_device *pdev) static int rmb_pcm_resume(struct device *dev) { - struct acp_chip_info *chip = dev_get_platdata(dev); + struct acp_chip_info *chip = dev_get_drvdata(dev->parent); struct acp_stream *stream; struct snd_pcm_substream *substream; snd_pcm_uframes_t buf_in_frames; diff --git a/sound/soc/amd/acp/acp-renoir.c b/sound/soc/amd/acp/acp-renoir.c index ebf0106fc737..04f6d70b6a92 100644 --- a/sound/soc/amd/acp/acp-renoir.c +++ b/sound/soc/amd/acp/acp-renoir.c @@ -146,7 +146,7 @@ static void renoir_audio_remove(struct platform_device *pdev) static int rn_pcm_resume(struct device *dev) { - struct acp_chip_info *chip = dev_get_platdata(dev); + struct acp_chip_info *chip = dev_get_drvdata(dev->parent); struct acp_stream *stream; struct snd_pcm_substream *substream; snd_pcm_uframes_t buf_in_frames; diff --git a/sound/soc/amd/acp/acp63.c b/sound/soc/amd/acp/acp63.c index 52d895e624c7..1f15c96a9b94 100644 --- a/sound/soc/amd/acp/acp63.c +++ b/sound/soc/amd/acp/acp63.c @@ -250,7 +250,7 @@ static void acp63_audio_remove(struct platform_device *pdev) static int acp63_pcm_resume(struct device *dev) { - struct acp_chip_info *chip = dev_get_platdata(dev); + struct acp_chip_info *chip = dev_get_drvdata(dev->parent); struct acp_stream *stream; struct snd_pcm_substream *substream; snd_pcm_uframes_t buf_in_frames; diff --git a/sound/soc/amd/acp/acp70.c b/sound/soc/amd/acp/acp70.c index 6d5f5ade075c..217b717e9beb 100644 --- a/sound/soc/amd/acp/acp70.c +++ b/sound/soc/amd/acp/acp70.c @@ -182,7 +182,7 @@ static void acp_acp70_audio_remove(struct platform_device *pdev) static int acp70_pcm_resume(struct device *dev) { - struct acp_chip_info *chip = dev_get_platdata(dev); + struct acp_chip_info *chip = dev_get_drvdata(dev->parent); struct acp_stream *stream; struct snd_pcm_substream *substream; snd_pcm_uframes_t buf_in_frames; -- 2.43.0

5 7

[PATCH] ASoC: amd: ps: fix for irq handler return status
by Vijendar Mukunda 01 May '25

01 May '25

If any Soundwire manager interrupt is reported, and wake interrupt is not reported, in this scenario irq_flag will be set to zero, which results in interrupt handler return status as IRQ_NONE. Add new irq flag 'wake_irq_flag' check for SoundWire wake interrupt handling to fix incorrect irq handling return status. Fixes: 3898b189079c8 ("ASoC: amd: ps: add soundwire wake interrupt handling") Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda(a)amd.com> --- sound/soc/amd/ps/pci-ps.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/soc/amd/ps/pci-ps.c b/sound/soc/amd/ps/pci-ps.c index 8e57f31ef7f7..7936b3173632 100644 --- a/sound/soc/amd/ps/pci-ps.c +++ b/sound/soc/amd/ps/pci-ps.c @@ -193,6 +193,7 @@ static irqreturn_t acp63_irq_handler(int irq, void *dev_id) struct amd_sdw_manager *amd_manager; u32 ext_intr_stat, ext_intr_stat1; u16 irq_flag = 0; + u16 wake_irq_flag = 0; u16 sdw_dma_irq_flag = 0; adata = dev_id; @@ -231,7 +232,7 @@ static irqreturn_t acp63_irq_handler(int irq, void *dev_id) } if (adata->acp_rev >= ACP70_PCI_REV) - irq_flag = check_and_handle_acp70_sdw_wake_irq(adata); + wake_irq_flag = check_and_handle_acp70_sdw_wake_irq(adata); if (ext_intr_stat & BIT(PDM_DMA_STAT)) { ps_pdm_data = dev_get_drvdata(&adata->pdm_dev->dev); @@ -245,7 +246,7 @@ static irqreturn_t acp63_irq_handler(int irq, void *dev_id) if (sdw_dma_irq_flag) return IRQ_WAKE_THREAD; - if (irq_flag) + if (irq_flag | wake_irq_flag) return IRQ_HANDLED; else return IRQ_NONE; -- 2.45.2

2 1

[PATCH v2] ALSA: hda/tas2781: Remove tas2781_spi_fwlib.c and leverage SND_SOC_TAS2781_FMWLIB
by Shenghao Ding 30 Apr '25

30 Apr '25

Most codes in tas2781_spi_fwlib.c are same as tas2781-fmwlib.c, mainly for firmware parsing, only differece is the register reading, bit update and book switching in i2c and spi. The main purpose of this patch is for code cleaup and arrange the shared part for i2c and spi. Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> Acked-by: Mark Brown <broonie(a)kernel.org> --- v2: - Split tas2781_comlib into two parts. One is the shared lib for both SPI and I2C. The other is the lib for I2C use only. - Adjust the lib dependencies in Konfig and Makefile in HDA and CODECS - | Reported-by: kernel test robot <lkp(a)intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202504260724.ryu83bm2-lkp@intel.com/ v1: - Move the definition of TASDEVICE_CRC8_POLYNOMIAL to tas2781.h for both SPI and I2C. - Add isspi flag in the struct tasdevice_priv to distinguish SPI or I2C. - Define three register-read related methods due to the difference between SPI and I2C. For SPI-based TAS2781, it will have one-byte delay to read memory-mapped registers. During init, these three method will be initialized as spi or i2c register-read methods. - Define book-switching method due to the difference between SPI and I2C. - Add select SND_SOC_TAS2781_COMLIB & SND_SOC_TAS2781_FMWLIB for tas2781 hda spi driver in Kconfig. - remove tas2781-spi.h & tas2781_spi_fwlib.c. - remove tas2781_spi_fwlib.o in Makefile - Move the definition of TASDEVICE_CALIBRATION_DATA_NAME. - Remove the useless calib_data definition for code cleanup. - Define the TASDEV_CALIB_N definition in tas2781_hda.h for hda driver calibration. - Use TASDEV_CALIB_N instead of TAS2563_CAL_N. - Include tas2781.h instead of tas2781-dsp.h in tas2781_hda_spi.c. - Remove #include "tas2781-spi.h" in tas2781_hda_spi.c. - Move the macro definitions only for hda spi tas2781 driver into tas2781_hda_spi.c. - Add read_flag_mask and reg_shift setting in tasdevice_regmap. --- include/sound/tas2781-comlib-i2c.h | 37 + include/sound/tas2781.h | 45 +- sound/pci/hda/Kconfig | 4 +- sound/pci/hda/Makefile | 2 +- sound/pci/hda/tas2781-spi.h | 157 -- sound/pci/hda/tas2781_hda.h | 3 + sound/pci/hda/tas2781_hda_i2c.c | 26 +- sound/pci/hda/tas2781_hda_spi.c | 542 +++---- sound/pci/hda/tas2781_spi_fwlib.c | 2006 ------------------------- sound/soc/codecs/Kconfig | 8 +- sound/soc/codecs/Makefile | 2 + sound/soc/codecs/tas2781-comlib-i2c.c | 375 +++++ sound/soc/codecs/tas2781-comlib.c | 406 +---- sound/soc/codecs/tas2781-fmwlib.c | 17 +- sound/soc/codecs/tas2781-i2c.c | 1 + 15 files changed, 768 insertions(+), 2863 deletions(-) create mode 100644 include/sound/tas2781-comlib-i2c.h delete mode 100644 sound/pci/hda/tas2781-spi.h delete mode 100644 sound/pci/hda/tas2781_spi_fwlib.c create mode 100644 sound/soc/codecs/tas2781-comlib-i2c.c diff --git a/include/sound/tas2781-comlib-i2c.h b/include/sound/tas2781-comlib-i2c.h new file mode 100644 index 000000000000..a1afa5c444ba --- /dev/null +++ b/include/sound/tas2781-comlib-i2c.h @@ -0,0 +1,37 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +// +// ALSA SoC Texas Instruments TAS2563/TAS2781 Audio Smart Amplifier +// +// Copyright (C) 2025 Texas Instruments Incorporated +// https://www.ti.com +// +// The TAS2563/TAS2781 driver implements a flexible and configurable +// algo coefficient setting for one, two, or even multiple +// TAS2563/TAS2781 chips. +// +// Author: Shenghao Ding <shenghao-ding(a)ti.com> +// + +#ifndef __TAS2781_COMLIB_I2C_H__ +#define __TAS2781_COMLIB_I2C_H__ + +void tasdevice_reset(struct tasdevice_priv *tas_dev); +int tascodec_init(struct tasdevice_priv *tas_priv, void *codec, + struct module *module, + void (*cont)(const struct firmware *fw, void *context)); +struct tasdevice_priv *tasdevice_kzalloc(struct i2c_client *i2c); +int tasdevice_init(struct tasdevice_priv *tas_priv); +int tasdev_chn_switch(struct tasdevice_priv *tas_priv, + unsigned short chn); +int tasdevice_dev_update_bits( + struct tasdevice_priv *tasdevice, unsigned short chn, + unsigned int reg, unsigned int mask, unsigned int value); +int tasdevice_amp_putvol(struct tasdevice_priv *tas_priv, + struct snd_ctl_elem_value *ucontrol, struct soc_mixer_control *mc); +int tasdevice_amp_getvol(struct tasdevice_priv *tas_priv, + struct snd_ctl_elem_value *ucontrol, struct soc_mixer_control *mc); +int tasdevice_digital_getvol(struct tasdevice_priv *tas_priv, + struct snd_ctl_elem_value *ucontrol, struct soc_mixer_control *mc); +int tasdevice_digital_putvol(struct tasdevice_priv *tas_priv, + struct snd_ctl_elem_value *ucontrol, struct soc_mixer_control *mc); +#endif /* __TAS2781_COMLIB_I2C_H__ */ diff --git a/include/sound/tas2781.h b/include/sound/tas2781.h index eff011444cc8..8192a94d783a 100644 --- a/include/sound/tas2781.h +++ b/include/sound/tas2781.h @@ -32,6 +32,8 @@ SNDRV_PCM_FMTBIT_S24_LE | \ SNDRV_PCM_FMTBIT_S32_LE) +#define TASDEVICE_CRC8_POLYNOMIAL 0x4d + /* PAGE Control Register (available in page0 of each book) */ #define TASDEVICE_PAGE_SELECT 0x00 #define TASDEVICE_BOOKCTL_PAGE 0x00 @@ -193,6 +195,7 @@ struct tasdevice_priv { bool force_fwload_status; bool playback_started; bool isacpi; + bool isspi; bool is_user_space_calidata; unsigned int global_addr; @@ -210,41 +213,31 @@ struct tasdevice_priv { int (*tasdevice_load_block)(struct tasdevice_priv *tas_priv, struct tasdev_blk *block); + int (*change_chn_book)(struct tasdevice_priv *tas_priv, + unsigned short chn, int book); + int (*update_bits)(struct tasdevice_priv *tas_priv, + unsigned short chn, unsigned int reg, unsigned int mask, + unsigned int value); + int (*dev_read)(struct tasdevice_priv *tas_priv, + unsigned short chn, unsigned int reg, unsigned int *value); + int (*dev_bulk_read)(struct tasdevice_priv *tas_priv, + unsigned short chn, unsigned int reg, unsigned char *p_data, + unsigned int n_length); int (*save_calibration)(struct tasdevice_priv *tas_priv); void (*apply_calibration)(struct tasdevice_priv *tas_priv); }; -void tasdevice_reset(struct tasdevice_priv *tas_dev); -int tascodec_init(struct tasdevice_priv *tas_priv, void *codec, - struct module *module, - void (*cont)(const struct firmware *fw, void *context)); -struct tasdevice_priv *tasdevice_kzalloc(struct i2c_client *i2c); -int tasdevice_init(struct tasdevice_priv *tas_priv); -void tasdevice_remove(struct tasdevice_priv *tas_priv); -int tasdevice_save_calibration(struct tasdevice_priv *tas_priv); -void tasdevice_apply_calibration(struct tasdevice_priv *tas_priv); -int tasdev_chn_switch(struct tasdevice_priv *tas_priv, - unsigned short chn); int tasdevice_dev_read(struct tasdevice_priv *tas_priv, unsigned short chn, unsigned int reg, unsigned int *value); +int tasdevice_dev_bulk_read(struct tasdevice_priv *tas_priv, + unsigned short chn, unsigned int reg, unsigned char *p_data, + unsigned int n_length); int tasdevice_dev_write(struct tasdevice_priv *tas_priv, unsigned short chn, unsigned int reg, unsigned int value); int tasdevice_dev_bulk_write( struct tasdevice_priv *tas_priv, unsigned short chn, unsigned int reg, unsigned char *p_data, unsigned int n_length); -int tasdevice_dev_bulk_read(struct tasdevice_priv *tas_priv, - unsigned short chn, unsigned int reg, unsigned char *p_data, - unsigned int n_length); -int tasdevice_dev_update_bits( - struct tasdevice_priv *tasdevice, unsigned short chn, - unsigned int reg, unsigned int mask, unsigned int value); -int tasdevice_amp_putvol(struct tasdevice_priv *tas_priv, - struct snd_ctl_elem_value *ucontrol, struct soc_mixer_control *mc); -int tasdevice_amp_getvol(struct tasdevice_priv *tas_priv, - struct snd_ctl_elem_value *ucontrol, struct soc_mixer_control *mc); -int tasdevice_digital_putvol(struct tasdevice_priv *tas_priv, - struct snd_ctl_elem_value *ucontrol, struct soc_mixer_control *mc); -int tasdevice_digital_getvol(struct tasdevice_priv *tas_priv, - struct snd_ctl_elem_value *ucontrol, struct soc_mixer_control *mc); - +void tasdevice_remove(struct tasdevice_priv *tas_priv); +int tasdevice_save_calibration(struct tasdevice_priv *tas_priv); +void tasdevice_apply_calibration(struct tasdevice_priv *tas_priv); #endif /* __TAS2781_H__ */ diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig index 15cc46032583..24e935cb0cdb 100644 --- a/sound/pci/hda/Kconfig +++ b/sound/pci/hda/Kconfig @@ -186,7 +186,7 @@ config SND_HDA_SCODEC_TAS2781_I2C depends on ACPI depends on EFI depends on SND_SOC - select SND_SOC_TAS2781_COMLIB + select SND_SOC_TAS2781_COMLIB_I2C select SND_SOC_TAS2781_FMWLIB select CRC32 help @@ -202,6 +202,8 @@ config SND_HDA_SCODEC_TAS2781_SPI depends on ACPI depends on EFI depends on SND_SOC + select SND_SOC_TAS2781_FMWLIB + select CRC8 select CRC32 help Say Y or M here to include TAS2781 SPI HD-audio side codec support diff --git a/sound/pci/hda/Makefile b/sound/pci/hda/Makefile index 2953def7db67..13d6c7e63203 100644 --- a/sound/pci/hda/Makefile +++ b/sound/pci/hda/Makefile @@ -39,7 +39,7 @@ snd-hda-scodec-cs35l56-i2c-y := cs35l56_hda_i2c.o snd-hda-scodec-cs35l56-spi-y := cs35l56_hda_spi.o snd-hda-scodec-component-y := hda_component.o snd-hda-scodec-tas2781-i2c-y := tas2781_hda_i2c.o -snd-hda-scodec-tas2781-spi-y := tas2781_hda_spi.o tas2781_spi_fwlib.o +snd-hda-scodec-tas2781-spi-y := tas2781_hda_spi.o # common driver obj-$(CONFIG_SND_HDA) := snd-hda-codec.o diff --git a/sound/pci/hda/tas2781-spi.h b/sound/pci/hda/tas2781-spi.h deleted file mode 100644 index 7a0faceeb675..000000000000 --- a/sound/pci/hda/tas2781-spi.h +++ /dev/null @@ -1,157 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -// -// ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier -// -// Copyright (C) 2024 Texas Instruments Incorporated -// https://www.ti.com -// -// The TAS2781 driver implements a flexible and configurable -// algo coefficient setting for TAS2781 chips. -// -// Author: Baojun Xu <baojun.xu(a)ti.com> -// - -#ifndef __TAS2781_SPI_H__ -#define __TAS2781_SPI_H__ - -#define TASDEVICE_RATES \ - (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | \ - SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_88200) - -#define TASDEVICE_FORMATS \ - (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE | \ - SNDRV_PCM_FMTBIT_S32_LE) - -#define TASDEVICE_MAX_BOOK_NUM 256 -#define TASDEVICE_MAX_PAGE 256 - -#define TASDEVICE_MAX_SIZE (TASDEVICE_MAX_BOOK_NUM * TASDEVICE_MAX_PAGE) - -/* PAGE Control Register (available in page0 of each book) */ -#define TASDEVICE_PAGE_SELECT 0x00 -#define TASDEVICE_BOOKCTL_PAGE 0x00 -#define TASDEVICE_BOOKCTL_REG GENMASK(7, 1) -#define TASDEVICE_BOOK_ID(reg) (((reg) & GENMASK(24, 16)) >> 16) -#define TASDEVICE_PAGE_ID(reg) (((reg) & GENMASK(15, 8)) >> 8) -#define TASDEVICE_REG_ID(reg) (((reg) & GENMASK(7, 1)) >> 1) -#define TASDEVICE_PAGE_REG(reg) ((reg) & GENMASK(15, 1)) -#define TASDEVICE_REG(book, page, reg) \ - (((book) << 16) | ((page) << 8) | ((reg) << 1)) - -/* Software Reset */ -#define TAS2781_REG_SWRESET TASDEVICE_REG(0x0, 0x0, 0x01) -#define TAS2781_REG_SWRESET_RESET BIT(0) - -/* System Reset Check Register */ -#define TAS2781_REG_CLK_CONFIG TASDEVICE_REG(0x0, 0x0, 0x5c) -#define TAS2781_REG_CLK_CONFIG_RESET (0x19) -#define TAS2781_PRE_POST_RESET_CFG 3 - -/* Block Checksum */ -#define TASDEVICE_CHECKSUM TASDEVICE_REG(0x0, 0x0, 0x7e) - -/* Volume control */ -#define TAS2781_DVC_LVL TASDEVICE_REG(0x0, 0x0, 0x1a) -#define TAS2781_AMP_LEVEL TASDEVICE_REG(0x0, 0x0, 0x03) -#define TAS2781_AMP_LEVEL_MASK GENMASK(5, 1) - -#define TASDEVICE_CMD_SING_W 0x1 -#define TASDEVICE_CMD_BURST 0x2 -#define TASDEVICE_CMD_DELAY 0x3 -#define TASDEVICE_CMD_FIELD_W 0x4 - -#define TAS2781_SPI_MAX_FREQ (4 * HZ_PER_MHZ) - -#define TASDEVICE_CRC8_POLYNOMIAL 0x4d -#define TASDEVICE_SPEAKER_CALIBRATION_SIZE 20 - -/* Flag of calibration registers address. */ -#define TASDEVICE_CALIBRATION_REG_ADDRESS BIT(7) - -#define TASDEVICE_CALIBRATION_DATA_NAME L"CALI_DATA" -#define TASDEVICE_CALIBRATION_DATA_SIZE 256 - -enum calib_data { - R0_VAL = 0, - INV_R0, - R0LOW, - POWER, - TLIM, - CALIB_MAX -}; - -struct tasdevice_priv { - struct tasdevice_fw *cali_data_fmw; - struct tasdevice_rca rcabin; - struct tasdevice_fw *fmw; - struct gpio_desc *reset; - struct mutex codec_lock; - struct regmap *regmap; - struct device *dev; - - unsigned char crc8_lkp_tbl[CRC8_TABLE_SIZE]; - unsigned char coef_binaryname[64]; - unsigned char rca_binaryname[64]; - unsigned char dev_name[32]; - - bool force_fwload_status; - bool playback_started; - bool is_loading; - bool is_loaderr; - unsigned int cali_reg_array[CALIB_MAX]; - unsigned int cali_data[CALIB_MAX]; - unsigned int err_code; - void *codec; - int cur_book; - int cur_prog; - int cur_conf; - int fw_state; - int index; - int irq; - - int (*fw_parse_variable_header)(struct tasdevice_priv *tas_priv, - const struct firmware *fmw, - int offset); - int (*fw_parse_program_data)(struct tasdevice_priv *tas_priv, - struct tasdevice_fw *tas_fmw, - const struct firmware *fmw, int offset); - int (*fw_parse_configuration_data)(struct tasdevice_priv *tas_priv, - struct tasdevice_fw *tas_fmw, - const struct firmware *fmw, - int offset); - int (*tasdevice_load_block)(struct tasdevice_priv *tas_priv, - struct tasdev_blk *block); - - int (*save_calibration)(struct tasdevice_priv *tas_priv); - void (*apply_calibration)(struct tasdevice_priv *tas_priv); -}; - -int tasdevice_spi_dev_read(struct tasdevice_priv *tas_priv, - unsigned int reg, unsigned int *value); -int tasdevice_spi_dev_write(struct tasdevice_priv *tas_priv, - unsigned int reg, unsigned int value); -int tasdevice_spi_dev_bulk_write(struct tasdevice_priv *tas_priv, - unsigned int reg, unsigned char *p_data, - unsigned int n_length); -int tasdevice_spi_dev_bulk_read(struct tasdevice_priv *tas_priv, - unsigned int reg, unsigned char *p_data, - unsigned int n_length); -int tasdevice_spi_dev_update_bits(struct tasdevice_priv *tasdevice, - unsigned int reg, unsigned int mask, - unsigned int value); - -void tasdevice_spi_select_cfg_blk(void *context, int conf_no, - unsigned char block_type); -void tasdevice_spi_config_info_remove(void *context); -int tasdevice_spi_dsp_parser(void *context); -int tasdevice_spi_rca_parser(void *context, const struct firmware *fmw); -void tasdevice_spi_dsp_remove(void *context); -void tasdevice_spi_calbin_remove(void *context); -int tasdevice_spi_select_tuningprm_cfg(void *context, int prm, int cfg_no, - int rca_conf_no); -int tasdevice_spi_prmg_load(void *context, int prm_no); -int tasdevice_spi_prmg_calibdata_load(void *context, int prm_no); -void tasdevice_spi_tuning_switch(void *context, int state); -int tas2781_spi_load_calibration(void *context, char *file_name, - unsigned short i); -#endif /* __TAS2781_SPI_H__ */ diff --git a/sound/pci/hda/tas2781_hda.h b/sound/pci/hda/tas2781_hda.h index 32d27b202591..444231f87e53 100644 --- a/sound/pci/hda/tas2781_hda.h +++ b/sound/pci/hda/tas2781_hda.h @@ -9,6 +9,9 @@ #include <sound/asound.h> +#define TASDEVICE_CALIBRATION_DATA_NAME L"CALI_DATA" +#define TASDEV_CALIB_N 5 + /* * No standard control callbacks for SNDRV_CTL_ELEM_IFACE_CARD * Define two controls, one is Volume control callbacks, the other is diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c index 9d94ae5fcfe0..0a686e850540 100644 --- a/sound/pci/hda/tas2781_hda_i2c.c +++ b/sound/pci/hda/tas2781_hda_i2c.c @@ -22,6 +22,7 @@ #include <sound/hda_codec.h> #include <sound/soc.h> #include <sound/tas2781.h> +#include <sound/tas2781-comlib-i2c.h> #include <sound/tlv.h> #include <sound/tas2781-tlv.h> @@ -34,15 +35,6 @@ #define TASDEVICE_SPEAKER_CALIBRATION_SIZE 20 -enum calib_data { - R0_VAL = 0, - INV_R0, - R0LOW, - POWER, - TLIM, - CALIB_MAX -}; - #define TAS2563_MAX_CHANNELS 4 #define TAS2563_CAL_POWER TASDEVICE_REG(0, 0x0d, 0x3c) @@ -50,17 +42,15 @@ enum calib_data { #define TAS2563_CAL_INVR0 TASDEVICE_REG(0, 0x0f, 0x40) #define TAS2563_CAL_R0_LOW TASDEVICE_REG(0, 0x0f, 0x48) #define TAS2563_CAL_TLIM TASDEVICE_REG(0, 0x10, 0x14) -#define TAS2563_CAL_N 5 #define TAS2563_CAL_DATA_SIZE 4 #define TAS2563_CAL_CH_SIZE 20 #define TAS2563_CAL_ARRAY_SIZE 80 -static unsigned int cal_regs[TAS2563_CAL_N] = { +static unsigned int cal_regs[TASDEV_CALIB_N] = { TAS2563_CAL_POWER, TAS2563_CAL_R0, TAS2563_CAL_INVR0, TAS2563_CAL_R0_LOW, TAS2563_CAL_TLIM, }; - struct tas2781_hda { struct device *dev; struct tasdevice_priv *priv; @@ -475,7 +465,7 @@ static void tas2563_apply_calib(struct tasdevice_priv *tas_priv) int ret; for (int i = 0; i < tas_priv->ndev; i++) { - for (int j = 0; j < TAS2563_CAL_N; ++j) { + for (int j = 0; j < TASDEV_CALIB_N; ++j) { data = cpu_to_be32( *(uint32_t *)&tas_priv->cali_data.data[offset]); ret = tasdevice_dev_bulk_write(tas_priv, i, cal_regs[j], @@ -493,7 +483,7 @@ static int tas2563_save_calibration(struct tasdevice_priv *tas_priv) static efi_guid_t efi_guid = EFI_GUID(0x1f52d2a1, 0xbb3a, 0x457d, 0xbc, 0x09, 0x43, 0xa3, 0xf4, 0x31, 0x0a, 0x92); - static efi_char16_t *efi_vars[TAS2563_MAX_CHANNELS][TAS2563_CAL_N] = { + static efi_char16_t *efi_vars[TAS2563_MAX_CHANNELS][TASDEV_CALIB_N] = { { L"Power_1", L"R0_1", L"InvR0_1", L"R0_Low_1", L"TLim_1" }, { L"Power_2", L"R0_2", L"InvR0_2", L"R0_Low_2", L"TLim_2" }, { L"Power_3", L"R0_3", L"InvR0_3", L"R0_Low_3", L"TLim_3" }, @@ -511,7 +501,7 @@ static int tas2563_save_calibration(struct tasdevice_priv *tas_priv) return -ENOMEM; for (int i = 0; i < tas_priv->ndev; ++i) { - for (int j = 0; j < TAS2563_CAL_N; ++j) { + for (int j = 0; j < TASDEV_CALIB_N; ++j) { status = efi.get_variable(efi_vars[i][j], &efi_guid, &attr, &max_size, &tas_priv->cali_data.data[offset]); @@ -535,7 +525,7 @@ static void tas2781_apply_calib(struct tasdevice_priv *tas_priv) { struct calidata *cali_data = &tas_priv->cali_data; struct cali_reg *r = &cali_data->cali_reg_array; - unsigned int cali_reg[CALIB_MAX] = { + unsigned int cali_reg[TASDEV_CALIB_N] = { TASDEVICE_REG(0, 0x17, 0x74), TASDEVICE_REG(0, 0x18, 0x0c), TASDEVICE_REG(0, 0x18, 0x14), @@ -555,7 +545,7 @@ static void tas2781_apply_calib(struct tasdevice_priv *tas_priv) } for (i = 0; i < tas_priv->ndev; i++) { - for (j = 0; j < CALIB_MAX; j++) { + for (j = 0; j < TASDEV_CALIB_N; j++) { data = cpu_to_be32( *(uint32_t *)&tas_priv->cali_data.data[oft]); rc = tasdevice_dev_bulk_write(tas_priv, i, @@ -578,7 +568,7 @@ static int tas2781_save_calibration(struct tasdevice_priv *tas_priv) { efi_guid_t efi_guid = EFI_GUID(0x02f9af02, 0x7734, 0x4233, 0xb4, 0x3d, 0x93, 0xfe, 0x5a, 0xa3, 0x5d, 0xb3); - static efi_char16_t efi_name[] = L"CALI_DATA"; + static efi_char16_t efi_name[] = TASDEVICE_CALIBRATION_DATA_NAME; unsigned int attr, crc; unsigned int *tmp_val; efi_status_t status; diff --git a/sound/pci/hda/tas2781_hda_spi.c b/sound/pci/hda/tas2781_hda_spi.c index 92be591c6bfe..426fc6044c65 100644 --- a/sound/pci/hda/tas2781_hda_spi.c +++ b/sound/pci/hda/tas2781_hda_spi.c @@ -27,12 +27,10 @@ #include <sound/hda_codec.h> #include <sound/soc.h> -#include <sound/tas2781-dsp.h> +#include <sound/tas2781.h> #include <sound/tlv.h> #include <sound/tas2781-tlv.h> -#include "tas2781-spi.h" - #include "hda_local.h" #include "hda_auto_parser.h" #include "hda_component.h" @@ -40,6 +38,17 @@ #include "hda_generic.h" #include "tas2781_hda.h" +#define TASDEVICE_RANGE_MAX_SIZE (256 * 128) +#define TASDEVICE_WIN_LEN 128 +#define TAS2781_SPI_MAX_FREQ (4 * HZ_PER_MHZ) +/* Flag of calibration registers address. */ +#define TASDEVICE_CALIBRATION_REG_ADDRESS BIT(7) +#define TASDEV_UEFI_CALI_REG_ADDR_FLG BIT(7) + +/* System Reset Check Register */ +#define TAS2781_REG_CLK_CONFIG TASDEVICE_REG(0x0, 0x0, 0x5c) +#define TAS2781_REG_CLK_CONFIG_RESET 0x19 + struct tas2781_hda { struct tasdevice_priv *priv; struct acpi_device *dacpi; @@ -52,12 +61,12 @@ struct tas2781_hda { static const struct regmap_range_cfg tasdevice_ranges[] = { { .range_min = 0, - .range_max = TASDEVICE_MAX_SIZE, + .range_max = TASDEVICE_RANGE_MAX_SIZE, .selector_reg = TASDEVICE_PAGE_SELECT, .selector_mask = GENMASK(7, 0), .selector_shift = 0, .window_start = 0, - .window_len = TASDEVICE_MAX_PAGE, + .window_len = TASDEVICE_WIN_LEN, }, }; @@ -65,39 +74,19 @@ static const struct regmap_config tasdevice_regmap = { .reg_bits = 8, .val_bits = 8, .zero_flag_mask = true, + .read_flag_mask = 0x01, + .reg_shift = -1, .cache_type = REGCACHE_NONE, .ranges = tasdevice_ranges, .num_ranges = ARRAY_SIZE(tasdevice_ranges), - .max_register = TASDEVICE_MAX_SIZE, + .max_register = TASDEVICE_RANGE_MAX_SIZE, }; -static int tasdevice_spi_switch_book(struct tasdevice_priv *tas_priv, int reg) +static int tasdevice_spi_dev_read(struct tasdevice_priv *tas_priv, + unsigned short chn, unsigned int reg, unsigned int *val) { - struct regmap *map = tas_priv->regmap; - - if (tas_priv->cur_book != TASDEVICE_BOOK_ID(reg)) { - int ret = regmap_write(map, TASDEVICE_BOOKCTL_REG, - TASDEVICE_BOOK_ID(reg)); - if (ret < 0) { - dev_err(tas_priv->dev, "Switch Book E=%d\n", ret); - return ret; - } - tas_priv->cur_book = TASDEVICE_BOOK_ID(reg); - } - return 0; -} - -int tasdevice_spi_dev_read(struct tasdevice_priv *tas_priv, - unsigned int reg, - unsigned int *val) -{ - struct regmap *map = tas_priv->regmap; int ret; - ret = tasdevice_spi_switch_book(tas_priv, reg); - if (ret < 0) - return ret; - /* * In our TAS2781 SPI mode, if read from other book (not book 0), * or read from page number larger than 1 in book 0, one more byte @@ -106,11 +95,11 @@ int tasdevice_spi_dev_read(struct tasdevice_priv *tas_priv, if ((TASDEVICE_BOOK_ID(reg) > 0) || (TASDEVICE_PAGE_ID(reg) > 1)) { unsigned char data[2]; - ret = regmap_bulk_read(map, TASDEVICE_PAGE_REG(reg) | 1, + ret = tasdevice_dev_bulk_read(tas_priv, chn, reg, data, sizeof(data)); *val = data[1]; } else { - ret = regmap_read(map, TASDEVICE_PAGE_REG(reg) | 1, val); + ret = tasdevice_dev_read(tas_priv, chn, reg, val); } if (ret < 0) dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret); @@ -118,71 +107,25 @@ int tasdevice_spi_dev_read(struct tasdevice_priv *tas_priv, return ret; } -int tasdevice_spi_dev_write(struct tasdevice_priv *tas_priv, - unsigned int reg, - unsigned int value) -{ - struct regmap *map = tas_priv->regmap; - int ret; - - ret = tasdevice_spi_switch_book(tas_priv, reg); - if (ret < 0) - return ret; - - ret = regmap_write(map, TASDEVICE_PAGE_REG(reg), value); - if (ret < 0) - dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret); - - return ret; -} - -int tasdevice_spi_dev_bulk_write(struct tasdevice_priv *tas_priv, - unsigned int reg, - unsigned char *data, - unsigned int len) -{ - struct regmap *map = tas_priv->regmap; - int ret; - - ret = tasdevice_spi_switch_book(tas_priv, reg); - if (ret < 0) - return ret; - - ret = regmap_bulk_write(map, TASDEVICE_PAGE_REG(reg), data, len); - if (ret < 0) - dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret); - - return ret; -} - -int tasdevice_spi_dev_bulk_read(struct tasdevice_priv *tas_priv, - unsigned int reg, - unsigned char *data, - unsigned int len) +static int tasdevice_spi_dev_bulk_read(struct tasdevice_priv *tas_priv, + unsigned short chn, unsigned int reg, unsigned char *data, + unsigned int len) { - struct regmap *map = tas_priv->regmap; int ret; - ret = tasdevice_spi_switch_book(tas_priv, reg); - if (ret < 0) - return ret; - - if (len > TASDEVICE_MAX_PAGE) - len = TASDEVICE_MAX_PAGE; /* * In our TAS2781 SPI mode, if read from other book (not book 0), * or read from page number larger than 1 in book 0, one more byte * read is needed, and first byte is a dummy byte, need to be ignored. */ if ((TASDEVICE_BOOK_ID(reg) > 0) || (TASDEVICE_PAGE_ID(reg) > 1)) { - unsigned char buf[TASDEVICE_MAX_PAGE+1]; + unsigned char buf[TASDEVICE_WIN_LEN + 1]; - ret = regmap_bulk_read(map, TASDEVICE_PAGE_REG(reg) | 1, buf, - len + 1); + ret = tasdevice_dev_bulk_read(tas_priv, chn, reg, + buf, len + 1); memcpy(data, buf + 1, len); } else { - ret = regmap_bulk_read(map, TASDEVICE_PAGE_REG(reg) | 1, data, - len); + ret = tasdevice_dev_bulk_read(tas_priv, chn, reg, data, len); } if (ret < 0) dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret); @@ -190,31 +133,55 @@ int tasdevice_spi_dev_bulk_read(struct tasdevice_priv *tas_priv, return ret; } -int tasdevice_spi_dev_update_bits(struct tasdevice_priv *tas_priv, - unsigned int reg, - unsigned int mask, - unsigned int value) +static int tasdevice_spi_dev_update_bits(struct tasdevice_priv *tas_priv, + unsigned short chn, unsigned int reg, unsigned int mask, + unsigned int value) { - struct regmap *map = tas_priv->regmap; int ret, val; /* * In our TAS2781 SPI mode, read/write was masked in last bit of * address, it cause regmap_update_bits() not work as expected. */ - ret = tasdevice_spi_dev_read(tas_priv, reg, &val); + ret = tasdevice_dev_read(tas_priv, chn, reg, &val); if (ret < 0) { dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret); return ret; } - ret = regmap_write(map, TASDEVICE_PAGE_REG(reg), - (val & ~mask) | (mask & value)); + + ret = tasdevice_dev_write(tas_priv, chn, TASDEVICE_PAGE_REG(reg), + (val & ~mask) | (mask & value)); if (ret < 0) dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret); return ret; } +static int tasdevice_spi_change_chn_book(struct tasdevice_priv *p, + unsigned short chn, int book) +{ + int ret = 0; + + if (chn == p->index) { + struct tasdevice *tasdev = &p->tasdevice[chn]; + struct regmap *map = p->regmap; + + if (tasdev->cur_book != book) { + ret = regmap_write(map, TASDEVICE_BOOKCTL_REG, book); + if (ret < 0) + dev_err(p->dev, "%s, E=%d\n", __func__, ret); + else + tasdev->cur_book = book; + } + } else { + ret = -EXDEV; + dev_dbg(p->dev, "Not error, %s ignore channel(%d)\n", + __func__, chn); + } + + return ret; +} + static void tas2781_spi_reset(struct tasdevice_priv *tas_dev) { int ret; @@ -223,12 +190,13 @@ static void tas2781_spi_reset(struct tasdevice_priv *tas_dev) gpiod_set_value_cansleep(tas_dev->reset, 0); fsleep(800); gpiod_set_value_cansleep(tas_dev->reset, 1); + } else { + ret = tasdevice_dev_write(tas_dev, tas_dev->index, + TASDEVICE_REG_SWRESET, TASDEVICE_REG_SWRESET_RESET); + if (ret < 0) + dev_err(tas_dev->dev, "dev sw-reset fail, %d\n", ret); + fsleep(1000); } - ret = tasdevice_spi_dev_write(tas_dev, TAS2781_REG_SWRESET, - TAS2781_REG_SWRESET_RESET); - if (ret < 0) - dev_err(tas_dev->dev, "dev sw-reset fail, %d\n", ret); - fsleep(1000); } static int tascodec_spi_init(struct tasdevice_priv *tas_priv, @@ -245,7 +213,7 @@ static int tascodec_spi_init(struct tasdevice_priv *tas_priv, scnprintf(tas_priv->rca_binaryname, sizeof(tas_priv->rca_binaryname), "%sRCA%d.bin", - tas_priv->dev_name, tas_priv->index); + tas_priv->dev_name, tas_priv->ndev); crc8_populate_msb(tas_priv->crc8_lkp_tbl, TASDEVICE_CRC8_POLYNOMIAL); tas_priv->codec = codec; ret = request_firmware_nowait(module, FW_ACTION_UEVENT, @@ -260,26 +228,22 @@ static int tascodec_spi_init(struct tasdevice_priv *tas_priv, static void tasdevice_spi_init(struct tasdevice_priv *tas_priv) { - tas_priv->cur_prog = -1; - tas_priv->cur_conf = -1; + tas_priv->tasdevice[tas_priv->index].cur_book = -1; + tas_priv->tasdevice[tas_priv->index].cur_conf = -1; + tas_priv->tasdevice[tas_priv->index].cur_prog = -1; - tas_priv->cur_book = -1; - tas_priv->cur_prog = -1; - tas_priv->cur_conf = -1; + tas_priv->isspi = true; - /* Store default registers address for calibration data. */ - tas_priv->cali_reg_array[0] = TASDEVICE_REG(0, 0x17, 0x74); - tas_priv->cali_reg_array[1] = TASDEVICE_REG(0, 0x18, 0x0c); - tas_priv->cali_reg_array[2] = TASDEVICE_REG(0, 0x18, 0x14); - tas_priv->cali_reg_array[3] = TASDEVICE_REG(0, 0x13, 0x70); - tas_priv->cali_reg_array[4] = TASDEVICE_REG(0, 0x18, 0x7c); + tas_priv->update_bits = tasdevice_spi_dev_update_bits; + tas_priv->change_chn_book = tasdevice_spi_change_chn_book; + tas_priv->dev_read = tasdevice_spi_dev_read; + tas_priv->dev_bulk_read = tasdevice_spi_dev_bulk_read; mutex_init(&tas_priv->codec_lock); } static int tasdevice_spi_amp_putvol(struct tasdevice_priv *tas_priv, - struct snd_ctl_elem_value *ucontrol, - struct soc_mixer_control *mc) + struct snd_ctl_elem_value *ucontrol, struct soc_mixer_control *mc) { unsigned int invert = mc->invert; unsigned char mask; @@ -290,7 +254,8 @@ static int tasdevice_spi_amp_putvol(struct tasdevice_priv *tas_priv, mask <<= mc->shift; val = clamp(invert ? max - ucontrol->value.integer.value[0] : ucontrol->value.integer.value[0], 0, max); - ret = tasdevice_spi_dev_update_bits(tas_priv, + + ret = tasdevice_spi_dev_update_bits(tas_priv, tas_priv->index, mc->reg, mask, (unsigned int)(val << mc->shift)); if (ret) dev_err(tas_priv->dev, "set AMP vol error in dev %d\n", @@ -300,16 +265,14 @@ static int tasdevice_spi_amp_putvol(struct tasdevice_priv *tas_priv, } static int tasdevice_spi_amp_getvol(struct tasdevice_priv *tas_priv, - struct snd_ctl_elem_value *ucontrol, - struct soc_mixer_control *mc) + struct snd_ctl_elem_value *ucontrol, struct soc_mixer_control *mc) { unsigned int invert = mc->invert; unsigned char mask = 0; int max = mc->max; int ret, val; - /* Read the primary device */ - ret = tasdevice_spi_dev_read(tas_priv, mc->reg, &val); + ret = tasdevice_spi_dev_read(tas_priv, tas_priv->index, mc->reg, &val); if (ret) { dev_err(tas_priv->dev, "%s, get AMP vol error\n", __func__); return ret; @@ -324,9 +287,8 @@ static int tasdevice_spi_amp_getvol(struct tasdevice_priv *tas_priv, return ret; } -static int tasdevice_spi_digital_putvol(struct tasdevice_priv *tas_priv, - struct snd_ctl_elem_value *ucontrol, - struct soc_mixer_control *mc) +static int tasdevice_spi_digital_putvol(struct tasdevice_priv *p, + struct snd_ctl_elem_value *ucontrol, struct soc_mixer_control *mc) { unsigned int invert = mc->invert; int max = mc->max; @@ -334,26 +296,23 @@ static int tasdevice_spi_digital_putvol(struct tasdevice_priv *tas_priv, val = clamp(invert ? max - ucontrol->value.integer.value[0] : ucontrol->value.integer.value[0], 0, max); - ret = tasdevice_spi_dev_write(tas_priv, mc->reg, (unsigned int)val); + ret = tasdevice_dev_write(p, p->index, mc->reg, (unsigned int)val); if (ret) - dev_err(tas_priv->dev, "set digital vol err in dev %d\n", - tas_priv->index); + dev_err(p->dev, "set digital vol err in dev %d\n", p->index); return ret; } -static int tasdevice_spi_digital_getvol(struct tasdevice_priv *tas_priv, - struct snd_ctl_elem_value *ucontrol, - struct soc_mixer_control *mc) +static int tasdevice_spi_digital_getvol(struct tasdevice_priv *p, + struct snd_ctl_elem_value *ucontrol, struct soc_mixer_control *mc) { unsigned int invert = mc->invert; int max = mc->max; int ret, val; - /* Read the primary device as the whole */ - ret = tasdevice_spi_dev_read(tas_priv, mc->reg, &val); + ret = tasdevice_spi_dev_read(p, p->index, mc->reg, &val); if (ret) { - dev_err(tas_priv->dev, "%s, get digital vol err\n", __func__); + dev_err(p->dev, "%s, get digital vol err\n", __func__); return ret; } @@ -392,7 +351,7 @@ static int tas2781_read_acpi(struct tas2781_hda *tas_hda, ret = -EINVAL; goto err; } - nval = ret; + p->ndev = nval = ret; ret = device_property_read_u32_array(physdev, property, values, nval); if (ret) @@ -435,14 +394,17 @@ static int tas2781_read_acpi(struct tas2781_hda *tas_hda, static void tas2781_hda_playback_hook(struct device *dev, int action) { struct tas2781_hda *tas_hda = dev_get_drvdata(dev); + struct tasdevice_priv *tas_priv = tas_hda->priv; if (action == HDA_GEN_PCM_ACT_OPEN) { pm_runtime_get_sync(dev); - guard(mutex)(&tas_hda->priv->codec_lock); - tasdevice_spi_tuning_switch(tas_hda->priv, 0); + guard(mutex)(&tas_priv->codec_lock); + if (tas_priv->fw_state == TASDEVICE_DSP_FW_ALL_OK) + tasdevice_tuning_switch(tas_hda->priv, 0); } else if (action == HDA_GEN_PCM_ACT_CLOSE) { - guard(mutex)(&tas_hda->priv->codec_lock); - tasdevice_spi_tuning_switch(tas_hda->priv, 1); + guard(mutex)(&tas_priv->codec_lock); + if (tas_priv->fw_state == TASDEVICE_DSP_FW_ALL_OK) + tasdevice_tuning_switch(tas_priv, 1); pm_runtime_mark_last_busy(dev); pm_runtime_put_autosuspend(dev); } @@ -589,6 +551,7 @@ static int tas2781_digital_getvol(struct snd_kcontrol *kcontrol, struct soc_mixer_control *mc = (struct soc_mixer_control *)kcontrol->private_value; + guard(mutex)(&tas_priv->codec_lock); return tasdevice_spi_digital_getvol(tas_priv, ucontrol, mc); } @@ -599,6 +562,7 @@ static int tas2781_amp_getvol(struct snd_kcontrol *kcontrol, struct soc_mixer_control *mc = (struct soc_mixer_control *)kcontrol->private_value; + guard(mutex)(&tas_priv->codec_lock); return tasdevice_spi_amp_getvol(tas_priv, ucontrol, mc); } @@ -609,7 +573,7 @@ static int tas2781_digital_putvol(struct snd_kcontrol *kcontrol, struct soc_mixer_control *mc = (struct soc_mixer_control *)kcontrol->private_value; - /* The check of the given value is in tasdevice_digital_putvol. */ + guard(mutex)(&tas_priv->codec_lock); return tasdevice_spi_digital_putvol(tas_priv, ucontrol, mc); } @@ -620,7 +584,7 @@ static int tas2781_amp_putvol(struct snd_kcontrol *kcontrol, struct soc_mixer_control *mc = (struct soc_mixer_control *)kcontrol->private_value; - /* The check of the given value is in tasdevice_amp_putvol. */ + guard(mutex)(&tas_priv->codec_lock); return tasdevice_spi_amp_putvol(tas_priv, ucontrol, mc); } @@ -725,137 +689,164 @@ static const struct snd_kcontrol_new tas2781_dsp_conf_ctrl[] = { static void tas2781_apply_calib(struct tasdevice_priv *tas_priv) { - int i, rc; - - /* - * If no calibration data exist in tasdevice_priv *tas_priv, - * calibration apply will be ignored, and use default values - * in firmware binary, which was loaded during firmware download. - */ - if (tas_priv->cali_data[0] == 0) - return; - /* - * Calibration data was saved in tasdevice_priv *tas_priv as: - * unsigned int cali_data[CALIB_MAX]; - * and every data (in 4 bytes) will be saved in register which in - * book 0, and page number in page_array[], offset was saved in - * rgno_array[]. - */ - for (i = 0; i < CALIB_MAX; i++) { - rc = tasdevice_spi_dev_bulk_write(tas_priv, - tas_priv->cali_reg_array[i], - (unsigned char *)&tas_priv->cali_data[i], 4); - if (rc < 0) - dev_err(tas_priv->dev, - "chn %d calib %d bulk_wr err = %d\n", - tas_priv->index, i, rc); - } -} - -/* - * Update the calibration data, including speaker impedance, f0, etc, - * into algo. Calibrate data is done by manufacturer in the factory. - * These data are used by Algo for calculating the speaker temperature, - * speaker membrane excursion and f0 in real time during playback. - * Calibration data format in EFI is V2, since 2024. - */ -static int tas2781_save_calibration(struct tasdevice_priv *tas_priv) -{ - /* - * GUID was used for data access in BIOS, it was provided by board - * manufactory, like HP: "{02f9af02-7734-4233-b43d-93fe5aa35db3}" - */ - efi_guid_t efi_guid = - EFI_GUID(0x02f9af02, 0x7734, 0x4233, - 0xb4, 0x3d, 0x93, 0xfe, 0x5a, 0xa3, 0x5d, 0xb3); - static efi_char16_t efi_name[] = TASDEVICE_CALIBRATION_DATA_NAME; - unsigned char data[TASDEVICE_CALIBRATION_DATA_SIZE], *buf; - unsigned int attr, crc, offset, *tmp_val; - unsigned long total_sz = 0; - efi_status_t status; + struct calidata *cali_data = &tas_priv->cali_data; + struct cali_reg *r = &cali_data->cali_reg_array; + unsigned char *data = cali_data->data; + unsigned int *tmp_val = (unsigned int *)data; + unsigned int cali_reg[TASDEV_CALIB_N] = { + TASDEVICE_REG(0, 0x17, 0x74), + TASDEVICE_REG(0, 0x18, 0x0c), + TASDEVICE_REG(0, 0x18, 0x14), + TASDEVICE_REG(0, 0x13, 0x70), + TASDEVICE_REG(0, 0x18, 0x7c), + }; + unsigned int crc, oft; + unsigned char *buf; + int i, j, k, l; - tas_priv->cali_data[0] = 0; - status = efi.get_variable(efi_name, &efi_guid, &attr, &total_sz, data); - if (status == EFI_BUFFER_TOO_SMALL) { - if (total_sz > TASDEVICE_CALIBRATION_DATA_SIZE) - return -ENOMEM; - /* Get variable contents into buffer */ - status = efi.get_variable(efi_name, &efi_guid, &attr, - &total_sz, data); - } - if (status != EFI_SUCCESS) - return status; - - tmp_val = (unsigned int *)data; if (tmp_val[0] == 2781) { /* * New features were added in calibrated Data V3: * 1. Added calibration registers address define in - * a node, marked as Device id == 0x80. + * a node, marked as Device id == 0x80. * New features were added in calibrated Data V2: * 1. Added some the fields to store the link_id and - * uniqie_id for multi-link solutions + * uniqie_id for multi-link solutions * 2. Support flexible number of devices instead of - * fixed one in V1. + * fixed one in V1. * Layout of calibrated data V2 in UEFI(total 256 bytes): * ChipID (2781, 4 bytes) - * Device-Sum (4 bytes) + * Data-Group-Sum (4 bytes) * TimeStamp of Calibration (4 bytes) - * for (i = 0; i < Device-Sum; i++) { - * Device #i index_info () { - * SDW link id (2bytes) - * SDW unique_id (2bytes) - * } // if Device number is 0x80, mean it's - * calibration registers address. - * Calibrated Data of Device #i (20 bytes) + * for (i = 0; i < Data-Group-Sum; i++) { + * if (Data type != 0x80) (4 bytes) + * Calibrated Data of Device #i (20 bytes) + * else + * Calibration registers address (5*4 = 20 bytes) + * # V2: No reg addr in data grp section. + * # V3: Normally the last grp is the reg addr. * } * CRC (4 bytes) * Reserved (the rest) */ crc = crc32(~0, data, (3 + tmp_val[1] * 6) * 4) ^ ~0; - if (crc != tmp_val[3 + tmp_val[1] * 6]) - return 0; - - for (int j = 0; j < tmp_val[1]; j++) { - offset = j * 6 + 3; - if (tmp_val[offset] == tas_priv->index) { - for (int i = 0; i < CALIB_MAX; i++) - tas_priv->cali_data[i] = - tmp_val[offset + i + 1]; - } else if (tmp_val[offset] == - TASDEVICE_CALIBRATION_REG_ADDRESS) { - for (int i = 0; i < CALIB_MAX; i++) { - buf = &data[(offset + i + 1) * 4]; - tas_priv->cali_reg_array[i] = - TASDEVICE_REG(buf[1], buf[2], - buf[3]); + if (crc != tmp_val[3 + tmp_val[1] * 6]) { + cali_data->total_sz = 0; + dev_err(tas_priv->dev, "%s: CRC error\n", __func__); + return; + } + + for (j = 0, k = 0; j < tmp_val[1]; j++) { + oft = j * 6 + 3; + if (tmp_val[oft] == TASDEV_UEFI_CALI_REG_ADDR_FLG) { + for (i = 0; i < TASDEV_CALIB_N; i++) { + buf = &data[(oft + i + 1) * 4]; + cali_reg[i] = TASDEVICE_REG(buf[1], + buf[2], buf[3]); + } + } else { + l = j * (cali_data->cali_dat_sz_per_dev + 1); + if (k >= tas_priv->ndev || l > oft * 4) { + dev_err(tas_priv->dev, + "%s: dev sum error\n", + __func__); + cali_data->total_sz = 0; + return; } + + data[l] = k; + for (i = 0; i < TASDEV_CALIB_N * 4; i++) + data[l + i] = data[4 * oft + i]; + k++; } - tas_priv->apply_calibration(tas_priv); } } else { /* * Calibration data is in V1 format. * struct cali_data { - * char cali_data[20]; + * char cali_data[20]; * } * * struct { - * struct cali_data cali_data[4]; - * int TimeStamp of Calibration (4 bytes) - * int CRC (4 bytes) + * struct cali_data cali_data[4]; + * int TimeStamp of Calibration (4 bytes) + * int CRC (4 bytes) * } ueft; */ crc = crc32(~0, data, 84) ^ ~0; - if (crc == tmp_val[21]) { - for (int i = 0; i < CALIB_MAX; i++) - tas_priv->cali_data[i] = - tmp_val[tas_priv->index * 5 + i]; - tas_priv->apply_calibration(tas_priv); + if (crc != tmp_val[21]) { + cali_data->total_sz = 0; + dev_err(tas_priv->dev, "%s: V1 CRC error\n", __func__); + return; + } + + for (j = tas_priv->ndev - 1; j >= 0; j--) { + l = j * (cali_data->cali_dat_sz_per_dev + 1); + for (i = TASDEV_CALIB_N * 4; i > 0 ; i--) + data[l + i] = data[tas_priv->index * 5 + i]; + data[l+i] = j; + } + } + + if (tas_priv->dspbin_typ == TASDEV_BASIC) { + r->r0_reg = cali_reg[0]; + r->invr0_reg = cali_reg[1]; + r->r0_low_reg = cali_reg[2]; + r->pow_reg = cali_reg[3]; + r->tlimit_reg = cali_reg[4]; + } + + tas_priv->is_user_space_calidata = true; + cali_data->total_sz = + tas_priv->ndev * (cali_data->cali_dat_sz_per_dev + 1); +} + +/* + * Update the calibration data, including speaker impedance, f0, etc, + * into algo. Calibrate data is done by manufacturer in the factory. + * These data are used by Algo for calculating the speaker temperature, + * speaker membrane excursion and f0 in real time during playback. + * Calibration data format in EFI is V2, since 2024. + */ +static int tas2781_save_calibration(struct tasdevice_priv *tas_priv) +{ + /* + * GUID was used for data access in BIOS, it was provided by board + * manufactory, like HP: "{02f9af02-7734-4233-b43d-93fe5aa35db3}" + */ + efi_guid_t efi_guid = + EFI_GUID(0x02f9af02, 0x7734, 0x4233, + 0xb4, 0x3d, 0x93, 0xfe, 0x5a, 0xa3, 0x5d, 0xb3); + static efi_char16_t efi_name[] = TASDEVICE_CALIBRATION_DATA_NAME; + struct calidata *cali_data = &tas_priv->cali_data; + unsigned long total_sz = 0; + unsigned int attr, size; + efi_status_t status; + unsigned char *data; + + cali_data->cali_dat_sz_per_dev = 20; + size = tas_priv->ndev * (cali_data->cali_dat_sz_per_dev + 1); + status = efi.get_variable(efi_name, &efi_guid, &attr, &total_sz, NULL); + cali_data->total_sz = total_sz > size ? total_sz : size; + if (status == EFI_BUFFER_TOO_SMALL) { + /* Allocate data buffer of data_size bytes */ + data = tas_priv->cali_data.data = devm_kzalloc(tas_priv->dev, + tas_priv->cali_data.total_sz, GFP_KERNEL); + if (!data) { + tas_priv->cali_data.total_sz = 0; + return -ENOMEM; } + /* Get variable contents into buffer */ + status = efi.get_variable(efi_name, &efi_guid, &attr, + &tas_priv->cali_data.total_sz, data); + } + if (status != EFI_SUCCESS) { + tas_priv->cali_data.total_sz = 0; + return status; } + tas_priv->apply_calibration(tas_priv); return 0; } @@ -883,7 +874,7 @@ static void tasdev_fw_ready(const struct firmware *fmw, void *context) pm_runtime_get_sync(tas_priv->dev); guard(mutex)(&tas_priv->codec_lock); - ret = tasdevice_spi_rca_parser(tas_priv, fmw); + ret = tasdevice_rca_parser(tas_priv, fmw); if (ret) goto out; @@ -910,12 +901,12 @@ static void tasdev_fw_ready(const struct firmware *fmw, void *context) } } - tasdevice_spi_dsp_remove(tas_priv); + tasdevice_dsp_remove(tas_priv); tas_priv->fw_state = TASDEVICE_DSP_FW_PENDING; scnprintf(tas_priv->coef_binaryname, 64, "TAS2XXX%08X-%01d.bin", codec->core.subsystem_id, tas_priv->index); - ret = tasdevice_spi_dsp_parser(tas_priv); + ret = tasdevice_dsp_parser(tas_priv); if (ret) { dev_err(tas_priv->dev, "dspfw load %s error\n", tas_priv->coef_binaryname); @@ -945,26 +936,27 @@ static void tasdev_fw_ready(const struct firmware *fmw, void *context) goto out; } - /* Perform AMP reset before firmware download. */ - tas_priv->rcabin.profile_cfg_id = TAS2781_PRE_POST_RESET_CFG; tas2781_spi_reset(tas_priv); tas_priv->rcabin.profile_cfg_id = 0; tas_priv->fw_state = TASDEVICE_DSP_FW_ALL_OK; - ret = tasdevice_spi_dev_read(tas_priv, TAS2781_REG_CLK_CONFIG, &val); + ret = tas_priv->dev_read(tas_priv, tas_priv->index, + TAS2781_REG_CLK_CONFIG, &val); if (ret < 0) goto out; - if (val == TAS2781_REG_CLK_CONFIG_RESET) - ret = tasdevice_spi_prmg_load(tas_priv, 0); - if (ret < 0) { - dev_err(tas_priv->dev, "FW download failed = %d\n", ret); - goto out; + if (val == TAS2781_REG_CLK_CONFIG_RESET) { + ret = tasdevice_prmg_load(tas_priv, 0); + if (ret < 0) { + dev_err(tas_priv->dev, "FW download failed = %d\n", + ret); + goto out; + } } if (tas_priv->fmw->nr_programs > 0) - tas_priv->cur_prog = 0; + tas_priv->tasdevice[tas_priv->index].cur_prog = 0; if (tas_priv->fmw->nr_configurations > 0) - tas_priv->cur_conf = 0; + tas_priv->tasdevice[tas_priv->index].cur_conf = 0; /* * If calibrated data occurs error, dsp will still works with default @@ -1017,9 +1009,10 @@ static void tas2781_hda_unbind(struct device *dev, struct device *master, { struct tas2781_hda *tas_hda = dev_get_drvdata(dev); struct hda_component_parent *parent = master_data; + struct tasdevice_priv *tas_priv = tas_hda->priv; struct hda_component *comp; - comp = hda_component_from_index(parent, tas_hda->priv->index); + comp = hda_component_from_index(parent, tas_priv->index); if (comp && (comp->dev == dev)) { comp->dev = NULL; memset(comp->name, 0, sizeof(comp->name)); @@ -1028,8 +1021,8 @@ static void tas2781_hda_unbind(struct device *dev, struct device *master, tas2781_hda_remove_controls(tas_hda); - tasdevice_spi_config_info_remove(tas_hda->priv); - tasdevice_spi_dsp_remove(tas_hda->priv); + tasdevice_config_info_remove(tas_priv); + tasdevice_dsp_remove(tas_priv); tas_hda->priv->fw_state = TASDEVICE_DSP_FW_PENDING; } @@ -1124,14 +1117,16 @@ static void tas2781_hda_spi_remove(struct spi_device *spi) static int tas2781_runtime_suspend(struct device *dev) { struct tas2781_hda *tas_hda = dev_get_drvdata(dev); + struct tasdevice_priv *tas_priv = tas_hda->priv; - guard(mutex)(&tas_hda->priv->codec_lock); + guard(mutex)(&tas_priv->codec_lock); - if (tas_hda->priv->playback_started) - tasdevice_spi_tuning_switch(tas_hda->priv, 1); + if (tas_priv->fw_state == TASDEVICE_DSP_FW_ALL_OK + && tas_priv->playback_started) + tasdevice_tuning_switch(tas_priv, 1); - tas_hda->priv->cur_book = -1; - tas_hda->priv->cur_conf = -1; + tas_priv->tasdevice[tas_priv->index].cur_book = -1; + tas_priv->tasdevice[tas_priv->index].cur_conf = -1; return 0; } @@ -1139,11 +1134,13 @@ static int tas2781_runtime_suspend(struct device *dev) static int tas2781_runtime_resume(struct device *dev) { struct tas2781_hda *tas_hda = dev_get_drvdata(dev); + struct tasdevice_priv *tas_priv = tas_hda->priv; - guard(mutex)(&tas_hda->priv->codec_lock); + guard(mutex)(&tas_priv->codec_lock); - if (tas_hda->priv->playback_started) - tasdevice_spi_tuning_switch(tas_hda->priv, 0); + if (tas_priv->fw_state == TASDEVICE_DSP_FW_ALL_OK + && tas_priv->playback_started) + tasdevice_tuning_switch(tas_priv, 0); return 0; } @@ -1151,6 +1148,7 @@ static int tas2781_runtime_resume(struct device *dev) static int tas2781_system_suspend(struct device *dev) { struct tas2781_hda *tas_hda = dev_get_drvdata(dev); + struct tasdevice_priv *tas_priv = tas_hda->priv; int ret; ret = pm_runtime_force_suspend(dev); @@ -1158,8 +1156,9 @@ static int tas2781_system_suspend(struct device *dev) return ret; /* Shutdown chip before system suspend */ - if (tas_hda->priv->playback_started) - tasdevice_spi_tuning_switch(tas_hda->priv, 1); + if (tas_priv->fw_state == TASDEVICE_DSP_FW_ALL_OK + && tas_priv->playback_started) + tasdevice_tuning_switch(tas_priv, 1); return 0; } @@ -1167,32 +1166,34 @@ static int tas2781_system_suspend(struct device *dev) static int tas2781_system_resume(struct device *dev) { struct tas2781_hda *tas_hda = dev_get_drvdata(dev); + struct tasdevice_priv *tas_priv = tas_hda->priv; int ret, val; ret = pm_runtime_force_resume(dev); if (ret) return ret; - guard(mutex)(&tas_hda->priv->codec_lock); - ret = tasdevice_spi_dev_read(tas_hda->priv, TAS2781_REG_CLK_CONFIG, - &val); + guard(mutex)(&tas_priv->codec_lock); + ret = tas_priv->dev_read(tas_priv, tas_priv->index, + TAS2781_REG_CLK_CONFIG, &val); if (ret < 0) return ret; if (val == TAS2781_REG_CLK_CONFIG_RESET) { - tas_hda->priv->cur_book = -1; - tas_hda->priv->cur_conf = -1; - tas_hda->priv->cur_prog = -1; + tas_priv->tasdevice[tas_priv->index].cur_book = -1; + tas_priv->tasdevice[tas_priv->index].cur_conf = -1; + tas_priv->tasdevice[tas_priv->index].cur_prog = -1; - ret = tasdevice_spi_prmg_load(tas_hda->priv, 0); + ret = tasdevice_prmg_load(tas_priv, 0); if (ret < 0) { - dev_err(tas_hda->priv->dev, + dev_err(tas_priv->dev, "FW download failed = %d\n", ret); return ret; } + tas_priv->fw_state = TASDEVICE_DSP_FW_ALL_OK; - if (tas_hda->priv->playback_started) - tasdevice_spi_tuning_switch(tas_hda->priv, 0); + if (tas_priv->playback_started) + tasdevice_tuning_switch(tas_priv, 0); } return ret; @@ -1229,3 +1230,4 @@ module_spi_driver(tas2781_hda_spi_driver); MODULE_DESCRIPTION("TAS2781 HDA SPI Driver"); MODULE_AUTHOR("Baojun, Xu, <baojun.xug(a)ti.com>"); MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS("SND_SOC_TAS2781_FMWLIB"); diff --git a/sound/pci/hda/tas2781_spi_fwlib.c b/sound/pci/hda/tas2781_spi_fwlib.c deleted file mode 100644 index d90d022d8449..000000000000 --- a/sound/pci/hda/tas2781_spi_fwlib.c +++ /dev/null @@ -1,2006 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// TAS2781 HDA SPI driver -// -// Copyright 2024 - 2025 Texas Instruments, Inc. -// -// Author: Baojun Xu <baojun.xu(a)ti.com> - -#include <linux/crc8.h> -#include <linux/firmware.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/types.h> -#include <linux/unaligned.h> -#include <sound/pcm_params.h> -#include <sound/soc.h> -#include <sound/tas2781-dsp.h> -#include <sound/tlv.h> - -#include "tas2781-spi.h" - -#define OFFSET_ERROR_BIT BIT(31) - -#define ERROR_PRAM_CRCCHK 0x0000000 -#define ERROR_YRAM_CRCCHK 0x0000001 -#define PPC_DRIVER_CRCCHK 0x00000200 - -#define TAS2781_SA_COEFF_SWAP_REG TASDEVICE_REG(0, 0x35, 0x2c) -#define TAS2781_YRAM_BOOK1 140 -#define TAS2781_YRAM1_PAGE 42 -#define TAS2781_YRAM1_START_REG 88 - -#define TAS2781_YRAM2_START_PAGE 43 -#define TAS2781_YRAM2_END_PAGE 49 -#define TAS2781_YRAM2_START_REG 8 -#define TAS2781_YRAM2_END_REG 127 - -#define TAS2781_YRAM3_PAGE 50 -#define TAS2781_YRAM3_START_REG 8 -#define TAS2781_YRAM3_END_REG 27 - -/* should not include B0_P53_R44-R47 */ -#define TAS2781_YRAM_BOOK2 0 -#define TAS2781_YRAM4_START_PAGE 50 -#define TAS2781_YRAM4_END_PAGE 60 - -#define TAS2781_YRAM5_PAGE 61 -#define TAS2781_YRAM5_START_REG TAS2781_YRAM3_START_REG -#define TAS2781_YRAM5_END_REG TAS2781_YRAM3_END_REG - -#define TASDEVICE_MAXPROGRAM_NUM_KERNEL 5 -#define TASDEVICE_MAXCONFIG_NUM_KERNEL_MULTIPLE_AMPS 64 -#define TASDEVICE_MAXCONFIG_NUM_KERNEL 10 -#define MAIN_ALL_DEVICES_1X 0x01 -#define MAIN_DEVICE_A_1X 0x02 -#define MAIN_DEVICE_B_1X 0x03 -#define MAIN_DEVICE_C_1X 0x04 -#define MAIN_DEVICE_D_1X 0x05 -#define COEFF_DEVICE_A_1X 0x12 -#define COEFF_DEVICE_B_1X 0x13 -#define COEFF_DEVICE_C_1X 0x14 -#define COEFF_DEVICE_D_1X 0x15 -#define PRE_DEVICE_A_1X 0x22 -#define PRE_DEVICE_B_1X 0x23 -#define PRE_DEVICE_C_1X 0x24 -#define PRE_DEVICE_D_1X 0x25 -#define PRE_SOFTWARE_RESET_DEVICE_A 0x41 -#define PRE_SOFTWARE_RESET_DEVICE_B 0x42 -#define PRE_SOFTWARE_RESET_DEVICE_C 0x43 -#define PRE_SOFTWARE_RESET_DEVICE_D 0x44 -#define POST_SOFTWARE_RESET_DEVICE_A 0x45 -#define POST_SOFTWARE_RESET_DEVICE_B 0x46 -#define POST_SOFTWARE_RESET_DEVICE_C 0x47 -#define POST_SOFTWARE_RESET_DEVICE_D 0x48 - -struct tas_crc { - unsigned char offset; - unsigned char len; -}; - -struct blktyp_devidx_map { - unsigned char blktyp; - unsigned char dev_idx; -}; - -/* fixed m68k compiling issue: mapping table can save code field */ -static const struct blktyp_devidx_map ppc3_tas2781_mapping_table[] = { - { MAIN_ALL_DEVICES_1X, 0x80 }, - { MAIN_DEVICE_A_1X, 0x81 }, - { COEFF_DEVICE_A_1X, 0x81 }, - { PRE_DEVICE_A_1X, 0x81 }, - { PRE_SOFTWARE_RESET_DEVICE_A, 0xC1 }, - { POST_SOFTWARE_RESET_DEVICE_A, 0xC1 }, - { MAIN_DEVICE_B_1X, 0x82 }, - { COEFF_DEVICE_B_1X, 0x82 }, - { PRE_DEVICE_B_1X, 0x82 }, - { PRE_SOFTWARE_RESET_DEVICE_B, 0xC2 }, - { POST_SOFTWARE_RESET_DEVICE_B, 0xC2 }, - { MAIN_DEVICE_C_1X, 0x83 }, - { COEFF_DEVICE_C_1X, 0x83 }, - { PRE_DEVICE_C_1X, 0x83 }, - { PRE_SOFTWARE_RESET_DEVICE_C, 0xC3 }, - { POST_SOFTWARE_RESET_DEVICE_C, 0xC3 }, - { MAIN_DEVICE_D_1X, 0x84 }, - { COEFF_DEVICE_D_1X, 0x84 }, - { PRE_DEVICE_D_1X, 0x84 }, - { PRE_SOFTWARE_RESET_DEVICE_D, 0xC4 }, - { POST_SOFTWARE_RESET_DEVICE_D, 0xC4 }, -}; - -static const struct blktyp_devidx_map ppc3_mapping_table[] = { - { MAIN_ALL_DEVICES_1X, 0x80 }, - { MAIN_DEVICE_A_1X, 0x81 }, - { COEFF_DEVICE_A_1X, 0xC1 }, - { PRE_DEVICE_A_1X, 0xC1 }, - { MAIN_DEVICE_B_1X, 0x82 }, - { COEFF_DEVICE_B_1X, 0xC2 }, - { PRE_DEVICE_B_1X, 0xC2 }, - { MAIN_DEVICE_C_1X, 0x83 }, - { COEFF_DEVICE_C_1X, 0xC3 }, - { PRE_DEVICE_C_1X, 0xC3 }, - { MAIN_DEVICE_D_1X, 0x84 }, - { COEFF_DEVICE_D_1X, 0xC4 }, - { PRE_DEVICE_D_1X, 0xC4 }, -}; - -static const struct blktyp_devidx_map non_ppc3_mapping_table[] = { - { MAIN_ALL_DEVICES, 0x80 }, - { MAIN_DEVICE_A, 0x81 }, - { COEFF_DEVICE_A, 0xC1 }, - { PRE_DEVICE_A, 0xC1 }, - { MAIN_DEVICE_B, 0x82 }, - { COEFF_DEVICE_B, 0xC2 }, - { PRE_DEVICE_B, 0xC2 }, - { MAIN_DEVICE_C, 0x83 }, - { COEFF_DEVICE_C, 0xC3 }, - { PRE_DEVICE_C, 0xC3 }, - { MAIN_DEVICE_D, 0x84 }, - { COEFF_DEVICE_D, 0xC4 }, - { PRE_DEVICE_D, 0xC4 }, -}; - -/* - * Device support different configurations for different scene, - * like voice, music, calibration, was write in regbin file. - * Will be stored into tas_priv after regbin was loaded. - */ -static struct tasdevice_config_info *tasdevice_add_config( - struct tasdevice_priv *tas_priv, unsigned char *config_data, - unsigned int config_size, int *status) -{ - struct tasdevice_config_info *cfg_info; - struct tasdev_blk_data **bk_da; - unsigned int config_offset = 0; - unsigned int i; - - /* - * In most projects are many audio cases, such as music, handfree, - * receiver, games, audio-to-haptics, PMIC record, bypass mode, - * portrait, landscape, etc. Even in multiple audios, one or - * two of the chips will work for the special case, such as - * ultrasonic application. In order to support these variable-numbers - * of audio cases, flexible configs have been introduced in the - * DSP firmware. - */ - cfg_info = kzalloc(sizeof(*cfg_info), GFP_KERNEL); - if (!cfg_info) { - *status = -ENOMEM; - return NULL; - } - - if (tas_priv->rcabin.fw_hdr.binary_version_num >= 0x105) { - if ((config_offset + 64) > config_size) { - *status = -EINVAL; - dev_err(tas_priv->dev, "add conf: Out of boundary\n"); - goto config_err; - } - config_offset += 64; - } - - if ((config_offset + 4) > config_size) { - *status = -EINVAL; - dev_err(tas_priv->dev, "add config: Out of boundary\n"); - goto config_err; - } - - /* - * convert data[offset], data[offset + 1], data[offset + 2] and - * data[offset + 3] into host - */ - cfg_info->nblocks = get_unaligned_be32(&config_data[config_offset]); - config_offset += 4; - - /* - * Several kinds of dsp/algorithm firmwares can run on tas2781, - * the number and size of blk are not fixed and different among - * these firmwares. - */ - bk_da = cfg_info->blk_data = kcalloc(cfg_info->nblocks, - sizeof(*bk_da), GFP_KERNEL); - if (!bk_da) { - *status = -ENOMEM; - goto config_err; - } - cfg_info->real_nblocks = 0; - for (i = 0; i < cfg_info->nblocks; i++) { - if (config_offset + 12 > config_size) { - *status = -EINVAL; - dev_err(tas_priv->dev, - "%s: Out of boundary: i = %d nblocks = %u!\n", - __func__, i, cfg_info->nblocks); - goto block_err; - } - bk_da[i] = kzalloc(sizeof(*bk_da[i]), GFP_KERNEL); - if (!bk_da[i]) { - *status = -ENOMEM; - goto block_err; - } - - bk_da[i]->dev_idx = config_data[config_offset]; - config_offset++; - - bk_da[i]->block_type = config_data[config_offset]; - config_offset++; - - bk_da[i]->yram_checksum = - get_unaligned_be16(&config_data[config_offset]); - config_offset += 2; - bk_da[i]->block_size = - get_unaligned_be32(&config_data[config_offset]); - config_offset += 4; - - bk_da[i]->n_subblks = - get_unaligned_be32(&config_data[config_offset]); - - config_offset += 4; - - if (config_offset + bk_da[i]->block_size > config_size) { - *status = -EINVAL; - dev_err(tas_priv->dev, - "%s: Out of boundary: i = %d blks = %u!\n", - __func__, i, cfg_info->nblocks); - goto block_err; - } - /* instead of kzalloc+memcpy */ - bk_da[i]->regdata = kmemdup(&config_data[config_offset], - bk_da[i]->block_size, GFP_KERNEL); - if (!bk_da[i]->regdata) { - *status = -ENOMEM; - i++; - goto block_err; - } - - config_offset += bk_da[i]->block_size; - cfg_info->real_nblocks += 1; - } - - return cfg_info; -block_err: - for (int j = 0; j < i; j++) - kfree(bk_da[j]); - kfree(bk_da); -config_err: - kfree(cfg_info); - return NULL; -} - -/* Regbin file parser function. */ -int tasdevice_spi_rca_parser(void *context, const struct firmware *fmw) -{ - struct tasdevice_priv *tas_priv = context; - struct tasdevice_config_info **cfg_info; - struct tasdevice_rca_hdr *fw_hdr; - struct tasdevice_rca *rca; - unsigned int total_config_sz = 0; - int offset = 0, ret = 0, i; - unsigned char *buf; - - rca = &tas_priv->rcabin; - fw_hdr = &rca->fw_hdr; - if (!fmw || !fmw->data) { - dev_err(tas_priv->dev, "Failed to read %s\n", - tas_priv->rca_binaryname); - tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; - return -EINVAL; - } - buf = (unsigned char *)fmw->data; - fw_hdr->img_sz = get_unaligned_be32(&buf[offset]); - offset += 4; - if (fw_hdr->img_sz != fmw->size) { - dev_err(tas_priv->dev, - "File size not match, %d %u", (int)fmw->size, - fw_hdr->img_sz); - tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; - return -EINVAL; - } - - fw_hdr->checksum = get_unaligned_be32(&buf[offset]); - offset += 4; - fw_hdr->binary_version_num = get_unaligned_be32(&buf[offset]); - if (fw_hdr->binary_version_num < 0x103) { - dev_err(tas_priv->dev, "File version 0x%04x is too low", - fw_hdr->binary_version_num); - tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; - return -EINVAL; - } - offset += 4; - fw_hdr->drv_fw_version = get_unaligned_be32(&buf[offset]); - offset += 8; - fw_hdr->plat_type = buf[offset++]; - fw_hdr->dev_family = buf[offset++]; - fw_hdr->reserve = buf[offset++]; - fw_hdr->ndev = buf[offset++]; - if (offset + TASDEVICE_DEVICE_SUM > fw_hdr->img_sz) { - dev_err(tas_priv->dev, "rca_ready: Out of boundary!\n"); - tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; - return -EINVAL; - } - - for (i = 0; i < TASDEVICE_DEVICE_SUM; i++, offset++) - fw_hdr->devs[i] = buf[offset]; - - fw_hdr->nconfig = get_unaligned_be32(&buf[offset]); - offset += 4; - - for (i = 0; i < TASDEVICE_CONFIG_SUM; i++) { - fw_hdr->config_size[i] = get_unaligned_be32(&buf[offset]); - offset += 4; - total_config_sz += fw_hdr->config_size[i]; - } - - if (fw_hdr->img_sz - total_config_sz != (unsigned int)offset) { - dev_err(tas_priv->dev, "Bin file err %d - %d != %d!\n", - fw_hdr->img_sz, total_config_sz, (int)offset); - tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; - return -EINVAL; - } - - cfg_info = kcalloc(fw_hdr->nconfig, sizeof(*cfg_info), GFP_KERNEL); - if (!cfg_info) { - tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; - return -ENOMEM; - } - rca->cfg_info = cfg_info; - rca->ncfgs = 0; - for (i = 0; i < (int)fw_hdr->nconfig; i++) { - rca->ncfgs += 1; - cfg_info[i] = tasdevice_add_config(tas_priv, &buf[offset], - fw_hdr->config_size[i], &ret); - if (ret) { - tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; - return ret; - } - offset += (int)fw_hdr->config_size[i]; - } - - return ret; -} - -/* fixed m68k compiling issue: mapping table can save code field */ -static unsigned char map_dev_idx(struct tasdevice_fw *tas_fmw, - struct tasdev_blk *block) -{ - struct blktyp_devidx_map *p = - (struct blktyp_devidx_map *)non_ppc3_mapping_table; - struct tasdevice_dspfw_hdr *fw_hdr = &tas_fmw->fw_hdr; - struct tasdevice_fw_fixed_hdr *fw_fixed_hdr = &fw_hdr->fixed_hdr; - int i, n = ARRAY_SIZE(non_ppc3_mapping_table); - unsigned char dev_idx = 0; - - if (fw_fixed_hdr->ppcver >= PPC3_VERSION_TAS2781_BASIC_MIN) { - p = (struct blktyp_devidx_map *)ppc3_tas2781_mapping_table; - n = ARRAY_SIZE(ppc3_tas2781_mapping_table); - } else if (fw_fixed_hdr->ppcver >= PPC3_VERSION_BASE) { - p = (struct blktyp_devidx_map *)ppc3_mapping_table; - n = ARRAY_SIZE(ppc3_mapping_table); - } - - for (i = 0; i < n; i++) { - if (block->type == p[i].blktyp) { - dev_idx = p[i].dev_idx; - break; - } - } - - return dev_idx; -} - -/* Block parser function. */ -static int fw_parse_block_data_kernel(struct tasdevice_fw *tas_fmw, - struct tasdev_blk *block, const struct firmware *fmw, int offset) -{ - const unsigned char *data = fmw->data; - - if (offset + 16 > fmw->size) { - dev_err(tas_fmw->dev, "%s: File Size error\n", __func__); - return -EINVAL; - } - - /* - * Convert data[offset], data[offset + 1], data[offset + 2] and - * data[offset + 3] into host. - */ - block->type = get_unaligned_be32(&data[offset]); - offset += 4; - - block->is_pchksum_present = data[offset++]; - block->pchksum = data[offset++]; - block->is_ychksum_present = data[offset++]; - block->ychksum = data[offset++]; - block->blk_size = get_unaligned_be32(&data[offset]); - offset += 4; - block->nr_subblocks = get_unaligned_be32(&data[offset]); - offset += 4; - - /* - * Fixed m68k compiling issue: - * 1. mapping table can save code field. - * 2. storing the dev_idx as a member of block can reduce unnecessary - * time and system resource comsumption of dev_idx mapping every - * time the block data writing to the dsp. - */ - block->dev_idx = map_dev_idx(tas_fmw, block); - - if (offset + block->blk_size > fmw->size) { - dev_err(tas_fmw->dev, "%s: nSublocks error\n", __func__); - return -EINVAL; - } - /* instead of kzalloc+memcpy */ - block->data = kmemdup(&data[offset], block->blk_size, GFP_KERNEL); - if (!block->data) - return -ENOMEM; - - offset += block->blk_size; - - return offset; -} - -/* Data of block parser function. */ -static int fw_parse_data_kernel(struct tasdevice_fw *tas_fmw, - struct tasdevice_data *img_data, const struct firmware *fmw, - int offset) -{ - const unsigned char *data = fmw->data; - struct tasdev_blk *blk; - unsigned int i; - - if (offset + 4 > fmw->size) { - dev_err(tas_fmw->dev, "%s: File Size error\n", __func__); - return -EINVAL; - } - img_data->nr_blk = get_unaligned_be32(&data[offset]); - offset += 4; - - img_data->dev_blks = kcalloc(img_data->nr_blk, - sizeof(struct tasdev_blk), GFP_KERNEL); - if (!img_data->dev_blks) - return -ENOMEM; - - for (i = 0; i < img_data->nr_blk; i++) { - blk = &img_data->dev_blks[i]; - offset = fw_parse_block_data_kernel( - tas_fmw, blk, fmw, offset); - if (offset < 0) { - kfree(img_data->dev_blks); - return -EINVAL; - } - } - - return offset; -} - -/* Data of DSP program parser function. */ -static int fw_parse_program_data_kernel( - struct tasdevice_priv *tas_priv, struct tasdevice_fw *tas_fmw, - const struct firmware *fmw, int offset) -{ - struct tasdevice_prog *program; - unsigned int i; - - for (i = 0; i < tas_fmw->nr_programs; i++) { - program = &tas_fmw->programs[i]; - if (offset + 72 > fmw->size) { - dev_err(tas_priv->dev, "%s: mpName error\n", __func__); - return -EINVAL; - } - /* skip 72 unused byts */ - offset += 72; - - offset = fw_parse_data_kernel(tas_fmw, &program->dev_data, - fmw, offset); - if (offset < 0) - break; - } - - return offset; -} - -/* Data of DSP configurations parser function. */ -static int fw_parse_configuration_data_kernel(struct tasdevice_priv *tas_priv, - struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) -{ - const unsigned char *data = fmw->data; - struct tasdevice_config *config; - unsigned int i; - - for (i = 0; i < tas_fmw->nr_configurations; i++) { - config = &tas_fmw->configs[i]; - if (offset + 80 > fmw->size) { - dev_err(tas_priv->dev, "%s: mpName error\n", __func__); - return -EINVAL; - } - memcpy(config->name, &data[offset], 64); - /* skip extra 16 bytes */ - offset += 80; - - offset = fw_parse_data_kernel(tas_fmw, &config->dev_data, - fmw, offset); - if (offset < 0) - break; - } - - return offset; -} - -/* DSP firmware file header parser function for early PPC3 firmware binary. */ -static int fw_parse_variable_header_kernel(struct tasdevice_priv *tas_priv, - const struct firmware *fmw, int offset) -{ - struct tasdevice_fw *tas_fmw = tas_priv->fmw; - struct tasdevice_dspfw_hdr *fw_hdr = &tas_fmw->fw_hdr; - struct tasdevice_config *config; - struct tasdevice_prog *program; - const unsigned char *buf = fmw->data; - unsigned short max_confs; - unsigned int i; - - if (offset + 12 + 4 * TASDEVICE_MAXPROGRAM_NUM_KERNEL > fmw->size) { - dev_err(tas_priv->dev, "%s: File Size error\n", __func__); - return -EINVAL; - } - fw_hdr->device_family = get_unaligned_be16(&buf[offset]); - if (fw_hdr->device_family != 0) { - dev_err(tas_priv->dev, "%s:not TAS device\n", __func__); - return -EINVAL; - } - offset += 2; - fw_hdr->device = get_unaligned_be16(&buf[offset]); - if (fw_hdr->device >= TASDEVICE_DSP_TAS_MAX_DEVICE || - fw_hdr->device == 6) { - dev_err(tas_priv->dev, "Unsupported dev %d\n", fw_hdr->device); - return -EINVAL; - } - offset += 2; - - tas_fmw->nr_programs = get_unaligned_be32(&buf[offset]); - offset += 4; - - if (tas_fmw->nr_programs == 0 || - tas_fmw->nr_programs > TASDEVICE_MAXPROGRAM_NUM_KERNEL) { - dev_err(tas_priv->dev, "mnPrograms is invalid\n"); - return -EINVAL; - } - - tas_fmw->programs = kcalloc(tas_fmw->nr_programs, - sizeof(*tas_fmw->programs), GFP_KERNEL); - if (!tas_fmw->programs) - return -ENOMEM; - - for (i = 0; i < tas_fmw->nr_programs; i++) { - program = &tas_fmw->programs[i]; - program->prog_size = get_unaligned_be32(&buf[offset]); - offset += 4; - } - - /* Skip the unused prog_size */ - offset += 4 * (TASDEVICE_MAXPROGRAM_NUM_KERNEL - tas_fmw->nr_programs); - - tas_fmw->nr_configurations = get_unaligned_be32(&buf[offset]); - offset += 4; - - /* - * The max number of config in firmware greater than 4 pieces of - * tas2781s is different from the one lower than 4 pieces of - * tas2781s. - */ - max_confs = TASDEVICE_MAXCONFIG_NUM_KERNEL; - if (tas_fmw->nr_configurations == 0 || - tas_fmw->nr_configurations > max_confs) { - dev_err(tas_priv->dev, "%s: Conf is invalid\n", __func__); - kfree(tas_fmw->programs); - return -EINVAL; - } - - if (offset + 4 * max_confs > fmw->size) { - dev_err(tas_priv->dev, "%s: mpConfigurations err\n", __func__); - kfree(tas_fmw->programs); - return -EINVAL; - } - - tas_fmw->configs = kcalloc(tas_fmw->nr_configurations, - sizeof(*tas_fmw->configs), GFP_KERNEL); - if (!tas_fmw->configs) { - kfree(tas_fmw->programs); - return -ENOMEM; - } - - for (i = 0; i < tas_fmw->nr_programs; i++) { - config = &tas_fmw->configs[i]; - config->cfg_size = get_unaligned_be32(&buf[offset]); - offset += 4; - } - - /* Skip the unused configs */ - offset += 4 * (max_confs - tas_fmw->nr_programs); - - return offset; -} - -/* - * In sub-block data, have three type sub-block: - * 1. Single byte write. - * 2. Multi-byte write. - * 3. Delay. - * 4. Bits update. - * This function perform single byte write to device. - */ -static int tasdevice_single_byte_wr(void *context, int dev_idx, - unsigned char *data, int sublocksize) -{ - struct tasdevice_priv *tas_priv = context; - unsigned short len = get_unaligned_be16(&data[2]); - int i, subblk_offset, rc; - - subblk_offset = 4; - if (subblk_offset + 4 * len > sublocksize) { - dev_err(tas_priv->dev, "process_block: Out of boundary\n"); - return 0; - } - - for (i = 0; i < len; i++) { - if (dev_idx == (tas_priv->index + 1) || dev_idx == 0) { - rc = tasdevice_spi_dev_write(tas_priv, - TASDEVICE_REG(data[subblk_offset], - data[subblk_offset + 1], - data[subblk_offset + 2]), - data[subblk_offset + 3]); - if (rc < 0) { - dev_err(tas_priv->dev, - "process_block: single write error\n"); - subblk_offset |= OFFSET_ERROR_BIT; - } - } - subblk_offset += 4; - } - - return subblk_offset; -} - -/* - * In sub-block data, have three type sub-block: - * 1. Single byte write. - * 2. Multi-byte write. - * 3. Delay. - * 4. Bits update. - * This function perform multi-write to device. - */ -static int tasdevice_burst_wr(void *context, int dev_idx, unsigned char *data, - int sublocksize) -{ - struct tasdevice_priv *tas_priv = context; - unsigned short len = get_unaligned_be16(&data[2]); - int subblk_offset, rc; - - subblk_offset = 4; - if (subblk_offset + 4 + len > sublocksize) { - dev_err(tas_priv->dev, "%s: BST Out of boundary\n", __func__); - subblk_offset |= OFFSET_ERROR_BIT; - } - if (len % 4) { - dev_err(tas_priv->dev, "%s:Bst-len(%u)not div by 4\n", - __func__, len); - subblk_offset |= OFFSET_ERROR_BIT; - } - - if (dev_idx == (tas_priv->index + 1) || dev_idx == 0) { - rc = tasdevice_spi_dev_bulk_write(tas_priv, - TASDEVICE_REG(data[subblk_offset], - data[subblk_offset + 1], - data[subblk_offset + 2]), - &data[subblk_offset + 4], len); - if (rc < 0) { - dev_err(tas_priv->dev, "%s: bulk_write error = %d\n", - __func__, rc); - subblk_offset |= OFFSET_ERROR_BIT; - } - } - subblk_offset += (len + 4); - - return subblk_offset; -} - -/* Just delay for ms.*/ -static int tasdevice_delay(void *context, int dev_idx, unsigned char *data, - int sublocksize) -{ - struct tasdevice_priv *tas_priv = context; - unsigned int sleep_time, subblk_offset = 2; - - if (subblk_offset + 2 > sublocksize) { - dev_err(tas_priv->dev, "%s: delay Out of boundary\n", - __func__); - subblk_offset |= OFFSET_ERROR_BIT; - } - if (dev_idx == (tas_priv->index + 1) || dev_idx == 0) { - sleep_time = get_unaligned_be16(&data[2]) * 1000; - fsleep(sleep_time); - } - subblk_offset += 2; - - return subblk_offset; -} - -/* - * In sub-block data, have three type sub-block: - * 1. Single byte write. - * 2. Multi-byte write. - * 3. Delay. - * 4. Bits update. - * This function perform bits update. - */ -static int tasdevice_field_wr(void *context, int dev_idx, unsigned char *data, - int sublocksize) -{ - struct tasdevice_priv *tas_priv = context; - int rc, subblk_offset = 2; - - if (subblk_offset + 6 > sublocksize) { - dev_err(tas_priv->dev, "%s: bit write Out of boundary\n", - __func__); - subblk_offset |= OFFSET_ERROR_BIT; - } - if (dev_idx == (tas_priv->index + 1) || dev_idx == 0) { - rc = tasdevice_spi_dev_update_bits(tas_priv, - TASDEVICE_REG(data[subblk_offset + 2], - data[subblk_offset + 3], - data[subblk_offset + 4]), - data[subblk_offset + 1], - data[subblk_offset + 5]); - if (rc < 0) { - dev_err(tas_priv->dev, "%s: update_bits error = %d\n", - __func__, rc); - subblk_offset |= OFFSET_ERROR_BIT; - } - } - subblk_offset += 6; - - return subblk_offset; -} - -/* Data block process function. */ -static int tasdevice_process_block(void *context, unsigned char *data, - unsigned char dev_idx, int sublocksize) -{ - struct tasdevice_priv *tas_priv = context; - int blktyp = dev_idx & 0xC0, subblk_offset; - unsigned char subblk_typ = data[1]; - - switch (subblk_typ) { - case TASDEVICE_CMD_SING_W: - subblk_offset = tasdevice_single_byte_wr(tas_priv, - dev_idx & 0x3f, data, sublocksize); - break; - case TASDEVICE_CMD_BURST: - subblk_offset = tasdevice_burst_wr(tas_priv, - dev_idx & 0x3f, data, sublocksize); - break; - case TASDEVICE_CMD_DELAY: - subblk_offset = tasdevice_delay(tas_priv, - dev_idx & 0x3f, data, sublocksize); - break; - case TASDEVICE_CMD_FIELD_W: - subblk_offset = tasdevice_field_wr(tas_priv, - dev_idx & 0x3f, data, sublocksize); - break; - default: - subblk_offset = 2; - break; - } - if (((subblk_offset & OFFSET_ERROR_BIT) != 0) && blktyp != 0) { - if (blktyp == 0x80) { - tas_priv->cur_prog = -1; - tas_priv->cur_conf = -1; - } else - tas_priv->cur_conf = -1; - } - subblk_offset &= ~OFFSET_ERROR_BIT; - - return subblk_offset; -} - -/* - * Device support different configurations for different scene, - * this function was used for choose different config. - */ -void tasdevice_spi_select_cfg_blk(void *pContext, int conf_no, - unsigned char block_type) -{ - struct tasdevice_priv *tas_priv = pContext; - struct tasdevice_rca *rca = &tas_priv->rcabin; - struct tasdevice_config_info **cfg_info = rca->cfg_info; - struct tasdev_blk_data **blk_data; - unsigned int j, k; - - if (conf_no >= rca->ncfgs || conf_no < 0 || !cfg_info) { - dev_err(tas_priv->dev, "conf_no should be not more than %u\n", - rca->ncfgs); - return; - } - blk_data = cfg_info[conf_no]->blk_data; - - for (j = 0; j < cfg_info[conf_no]->real_nblocks; j++) { - unsigned int length = 0, rc = 0; - - if (block_type > 5 || block_type < 2) { - dev_err(tas_priv->dev, - "block_type should be in range from 2 to 5\n"); - break; - } - if (block_type != blk_data[j]->block_type) - continue; - - for (k = 0; k < blk_data[j]->n_subblks; k++) { - tas_priv->is_loading = true; - - rc = tasdevice_process_block(tas_priv, - blk_data[j]->regdata + length, - blk_data[j]->dev_idx, - blk_data[j]->block_size - length); - length += rc; - if (blk_data[j]->block_size < length) { - dev_err(tas_priv->dev, - "%s: %u %u out of boundary\n", - __func__, length, - blk_data[j]->block_size); - break; - } - } - if (length != blk_data[j]->block_size) - dev_err(tas_priv->dev, "%s: %u %u size is not same\n", - __func__, length, blk_data[j]->block_size); - } -} - -/* Block process function. */ -static int tasdevice_load_block_kernel( - struct tasdevice_priv *tasdevice, struct tasdev_blk *block) -{ - const unsigned int blk_size = block->blk_size; - unsigned char *data = block->data; - unsigned int i, length; - - for (i = 0, length = 0; i < block->nr_subblocks; i++) { - int rc = tasdevice_process_block(tasdevice, data + length, - block->dev_idx, blk_size - length); - if (rc < 0) { - dev_err(tasdevice->dev, - "%s: %u %u sublock write error\n", - __func__, length, blk_size); - return rc; - } - length += rc; - if (blk_size < length) { - dev_err(tasdevice->dev, "%s: %u %u out of boundary\n", - __func__, length, blk_size); - rc = -ENOMEM; - return rc; - } - } - - return 0; -} - -/* DSP firmware file header parser function. */ -static int fw_parse_variable_hdr(struct tasdevice_priv *tas_priv, - struct tasdevice_dspfw_hdr *fw_hdr, - const struct firmware *fmw, int offset) -{ - const unsigned char *buf = fmw->data; - int len = strlen((char *)&buf[offset]); - - len++; - - if (offset + len + 8 > fmw->size) { - dev_err(tas_priv->dev, "%s: File Size error\n", __func__); - return -EINVAL; - } - - offset += len; - - fw_hdr->device_family = get_unaligned_be32(&buf[offset]); - if (fw_hdr->device_family != 0) { - dev_err(tas_priv->dev, "%s: not TAS device\n", __func__); - return -EINVAL; - } - offset += 4; - - fw_hdr->device = get_unaligned_be32(&buf[offset]); - if (fw_hdr->device >= TASDEVICE_DSP_TAS_MAX_DEVICE || - fw_hdr->device == 6) { - dev_err(tas_priv->dev, "Unsupported dev %d\n", fw_hdr->device); - return -EINVAL; - } - offset += 4; - fw_hdr->ndev = 1; - - return offset; -} - -/* DSP firmware file header parser function for size variabled header. */ -static int fw_parse_variable_header_git(struct tasdevice_priv - *tas_priv, const struct firmware *fmw, int offset) -{ - struct tasdevice_fw *tas_fmw = tas_priv->fmw; - struct tasdevice_dspfw_hdr *fw_hdr = &tas_fmw->fw_hdr; - - offset = fw_parse_variable_hdr(tas_priv, fw_hdr, fmw, offset); - - return offset; -} - -/* DSP firmware file block parser function. */ -static int fw_parse_block_data(struct tasdevice_fw *tas_fmw, - struct tasdev_blk *block, const struct firmware *fmw, int offset) -{ - unsigned char *data = (unsigned char *)fmw->data; - int n; - - if (offset + 8 > fmw->size) { - dev_err(tas_fmw->dev, "%s: Type error\n", __func__); - return -EINVAL; - } - block->type = get_unaligned_be32(&data[offset]); - offset += 4; - - if (tas_fmw->fw_hdr.fixed_hdr.drv_ver >= PPC_DRIVER_CRCCHK) { - if (offset + 8 > fmw->size) { - dev_err(tas_fmw->dev, "PChkSumPresent error\n"); - return -EINVAL; - } - block->is_pchksum_present = data[offset]; - offset++; - - block->pchksum = data[offset]; - offset++; - - block->is_ychksum_present = data[offset]; - offset++; - - block->ychksum = data[offset]; - offset++; - } else { - block->is_pchksum_present = 0; - block->is_ychksum_present = 0; - } - - block->nr_cmds = get_unaligned_be32(&data[offset]); - offset += 4; - - n = block->nr_cmds * 4; - if (offset + n > fmw->size) { - dev_err(tas_fmw->dev, - "%s: File Size(%lu) error offset = %d n = %d\n", - __func__, (unsigned long)fmw->size, offset, n); - return -EINVAL; - } - /* instead of kzalloc+memcpy */ - block->data = kmemdup(&data[offset], n, GFP_KERNEL); - if (!block->data) - return -ENOMEM; - - offset += n; - - return offset; -} - -/* - * When parsing error occurs, all the memory resource will be released - * in the end of tasdevice_rca_ready. - */ -static int fw_parse_data(struct tasdevice_fw *tas_fmw, - struct tasdevice_data *img_data, const struct firmware *fmw, - int offset) -{ - const unsigned char *data = (unsigned char *)fmw->data; - struct tasdev_blk *blk; - unsigned int i, n; - - if (offset + 64 > fmw->size) { - dev_err(tas_fmw->dev, "%s: Name error\n", __func__); - return -EINVAL; - } - memcpy(img_data->name, &data[offset], 64); - offset += 64; - - n = strlen((char *)&data[offset]); - n++; - if (offset + n + 2 > fmw->size) { - dev_err(tas_fmw->dev, "%s: Description error\n", __func__); - return -EINVAL; - } - offset += n; - img_data->nr_blk = get_unaligned_be16(&data[offset]); - offset += 2; - - img_data->dev_blks = kcalloc(img_data->nr_blk, - sizeof(*img_data->dev_blks), GFP_KERNEL); - if (!img_data->dev_blks) - return -ENOMEM; - - for (i = 0; i < img_data->nr_blk; i++) { - blk = &img_data->dev_blks[i]; - offset = fw_parse_block_data(tas_fmw, blk, fmw, offset); - if (offset < 0) - return -EINVAL; - } - - return offset; -} - -/* - * When parsing error occurs, all the memory resource will be released - * in the end of tasdevice_rca_ready. - */ -static int fw_parse_program_data(struct tasdevice_priv *tas_priv, - struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) -{ - unsigned char *buf = (unsigned char *)fmw->data; - struct tasdevice_prog *program; - int i; - - if (offset + 2 > fmw->size) { - dev_err(tas_priv->dev, "%s: File Size error\n", __func__); - return -EINVAL; - } - tas_fmw->nr_programs = get_unaligned_be16(&buf[offset]); - offset += 2; - - if (tas_fmw->nr_programs == 0) { - /* Not error in calibration Data file, return directly */ - dev_dbg(tas_priv->dev, "%s: No Programs data, maybe calbin\n", - __func__); - return offset; - } - - tas_fmw->programs = - kcalloc(tas_fmw->nr_programs, sizeof(*tas_fmw->programs), - GFP_KERNEL); - if (!tas_fmw->programs) - return -ENOMEM; - - for (i = 0; i < tas_fmw->nr_programs; i++) { - int n = 0; - - program = &tas_fmw->programs[i]; - if (offset + 64 > fmw->size) { - dev_err(tas_priv->dev, "%s: mpName error\n", __func__); - return -EINVAL; - } - offset += 64; - - n = strlen((char *)&buf[offset]); - /* skip '\0' and 5 unused bytes */ - n += 6; - if (offset + n > fmw->size) { - dev_err(tas_priv->dev, "Description err\n"); - return -EINVAL; - } - - offset += n; - - offset = fw_parse_data(tas_fmw, &program->dev_data, fmw, - offset); - if (offset < 0) - return offset; - } - - return offset; -} - -/* - * When parsing error occurs, all the memory resource will be released - * in the end of tasdevice_rca_ready. - */ -static int fw_parse_configuration_data(struct tasdevice_priv *tas_priv, - struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) -{ - unsigned char *data = (unsigned char *)fmw->data; - struct tasdevice_config *config; - unsigned int i, n; - - if (offset + 2 > fmw->size) { - dev_err(tas_priv->dev, "%s: File Size error\n", __func__); - return -EINVAL; - } - tas_fmw->nr_configurations = get_unaligned_be16(&data[offset]); - offset += 2; - - if (tas_fmw->nr_configurations == 0) { - dev_err(tas_priv->dev, "%s: Conf is zero\n", __func__); - /* Not error for calibration Data file, return directly */ - return offset; - } - tas_fmw->configs = kcalloc(tas_fmw->nr_configurations, - sizeof(*tas_fmw->configs), GFP_KERNEL); - if (!tas_fmw->configs) - return -ENOMEM; - for (i = 0; i < tas_fmw->nr_configurations; i++) { - config = &tas_fmw->configs[i]; - if (offset + 64 > fmw->size) { - dev_err(tas_priv->dev, "File Size err\n"); - return -EINVAL; - } - memcpy(config->name, &data[offset], 64); - offset += 64; - - n = strlen((char *)&data[offset]); - n += 15; - if (offset + n > fmw->size) { - dev_err(tas_priv->dev, "Description err\n"); - return -EINVAL; - } - offset += n; - offset = fw_parse_data(tas_fmw, &config->dev_data, - fmw, offset); - if (offset < 0) - break; - } - - return offset; -} - -/* yram5 page check. */ -static bool check_inpage_yram_rg(struct tas_crc *cd, - unsigned char reg, unsigned char len) -{ - bool in = false; - - if (reg <= TAS2781_YRAM5_END_REG && - reg >= TAS2781_YRAM5_START_REG) { - if (reg + len > TAS2781_YRAM5_END_REG) - cd->len = TAS2781_YRAM5_END_REG - reg + 1; - else - cd->len = len; - cd->offset = reg; - in = true; - } else if (reg < TAS2781_YRAM5_START_REG) { - if (reg + len > TAS2781_YRAM5_START_REG) { - cd->offset = TAS2781_YRAM5_START_REG; - cd->len = len - TAS2781_YRAM5_START_REG + reg; - in = true; - } - } - - return in; -} - -/* DSP firmware yram block check. */ -static bool check_inpage_yram_bk1(struct tas_crc *cd, - unsigned char page, unsigned char reg, unsigned char len) -{ - bool in = false; - - if (page == TAS2781_YRAM1_PAGE) { - if (reg >= TAS2781_YRAM1_START_REG) { - cd->offset = reg; - cd->len = len; - in = true; - } else if (reg + len > TAS2781_YRAM1_START_REG) { - cd->offset = TAS2781_YRAM1_START_REG; - cd->len = len - TAS2781_YRAM1_START_REG + reg; - in = true; - } - } else if (page == TAS2781_YRAM3_PAGE) { - in = check_inpage_yram_rg(cd, reg, len); - } - - return in; -} - -/* - * Return Code: - * true -- the registers are in the inpage yram - * false -- the registers are NOT in the inpage yram - */ -static bool check_inpage_yram(struct tas_crc *cd, unsigned char book, - unsigned char page, unsigned char reg, unsigned char len) -{ - bool in = false; - - if (book == TAS2781_YRAM_BOOK1) - in = check_inpage_yram_bk1(cd, page, reg, len); - else if (book == TAS2781_YRAM_BOOK2 && page == TAS2781_YRAM5_PAGE) - in = check_inpage_yram_rg(cd, reg, len); - - return in; -} - -/* yram4 page check. */ -static bool check_inblock_yram_bk(struct tas_crc *cd, - unsigned char page, unsigned char reg, unsigned char len) -{ - bool in = false; - - if ((page >= TAS2781_YRAM4_START_PAGE && - page <= TAS2781_YRAM4_END_PAGE) || - (page >= TAS2781_YRAM2_START_PAGE && - page <= TAS2781_YRAM2_END_PAGE)) { - if (reg <= TAS2781_YRAM2_END_REG && - reg >= TAS2781_YRAM2_START_REG) { - cd->offset = reg; - cd->len = len; - in = true; - } else if (reg < TAS2781_YRAM2_START_REG) { - if (reg + len - 1 >= TAS2781_YRAM2_START_REG) { - cd->offset = TAS2781_YRAM2_START_REG; - cd->len = reg + len - TAS2781_YRAM2_START_REG; - in = true; - } - } - } - - return in; -} - -/* - * Return Code: - * true -- the registers are in the inblock yram - * false -- the registers are NOT in the inblock yram - */ -static bool check_inblock_yram(struct tas_crc *cd, unsigned char book, - unsigned char page, unsigned char reg, unsigned char len) -{ - bool in = false; - - if (book == TAS2781_YRAM_BOOK1 || book == TAS2781_YRAM_BOOK2) - in = check_inblock_yram_bk(cd, page, reg, len); - - return in; -} - -/* yram page check. */ -static bool check_yram(struct tas_crc *cd, unsigned char book, - unsigned char page, unsigned char reg, unsigned char len) -{ - bool in; - - in = check_inpage_yram(cd, book, page, reg, len); - if (!in) - in = check_inblock_yram(cd, book, page, reg, len); - - return in; -} - -/* Checksum for data block. */ -static int tasdev_multibytes_chksum(struct tasdevice_priv *tasdevice, - unsigned char book, unsigned char page, - unsigned char reg, unsigned int len) -{ - struct tas_crc crc_data; - unsigned char crc_chksum = 0; - unsigned char nBuf1[128]; - int ret = 0, i; - bool in; - - if ((reg + len - 1) > 127) { - ret = -EINVAL; - dev_err(tasdevice->dev, "firmware error\n"); - goto end; - } - - if ((book == TASDEVICE_BOOK_ID(TAS2781_SA_COEFF_SWAP_REG)) && - (page == TASDEVICE_PAGE_ID(TAS2781_SA_COEFF_SWAP_REG)) && - (reg == TASDEVICE_REG_ID(TAS2781_SA_COEFF_SWAP_REG)) && - (len == 4)) { - /* DSP swap command, pass */ - ret = 0; - goto end; - } - - in = check_yram(&crc_data, book, page, reg, len); - if (!in) - goto end; - - if (len == 1) { - dev_err(tasdevice->dev, "firmware error\n"); - ret = -EINVAL; - goto end; - } - - ret = tasdevice_spi_dev_bulk_read(tasdevice, - TASDEVICE_REG(book, page, crc_data.offset), - nBuf1, crc_data.len); - if (ret < 0) - goto end; - - for (i = 0; i < crc_data.len; i++) { - if ((book == TASDEVICE_BOOK_ID(TAS2781_SA_COEFF_SWAP_REG)) && - (page == TASDEVICE_PAGE_ID(TAS2781_SA_COEFF_SWAP_REG)) && - ((i + crc_data.offset) >= - TASDEVICE_REG_ID(TAS2781_SA_COEFF_SWAP_REG)) && - ((i + crc_data.offset) <= - (TASDEVICE_REG_ID(TAS2781_SA_COEFF_SWAP_REG) + 4))) - /* DSP swap command, bypass */ - continue; - else - crc_chksum += crc8(tasdevice->crc8_lkp_tbl, &nBuf1[i], - 1, 0); - } - - ret = crc_chksum; - -end: - return ret; -} - -/* Checksum for single register. */ -static int do_singlereg_checksum(struct tasdevice_priv *tasdevice, - unsigned char book, unsigned char page, - unsigned char reg, unsigned char val) -{ - struct tas_crc crc_data; - unsigned int nData1; - int ret = 0; - bool in; - - /* DSP swap command, pass */ - if ((book == TASDEVICE_BOOK_ID(TAS2781_SA_COEFF_SWAP_REG)) && - (page == TASDEVICE_PAGE_ID(TAS2781_SA_COEFF_SWAP_REG)) && - (reg >= TASDEVICE_REG_ID(TAS2781_SA_COEFF_SWAP_REG)) && - (reg <= (TASDEVICE_REG_ID(TAS2781_SA_COEFF_SWAP_REG) + 4))) - return 0; - - in = check_yram(&crc_data, book, page, reg, 1); - if (!in) - return 0; - ret = tasdevice_spi_dev_read(tasdevice, - TASDEVICE_REG(book, page, reg), &nData1); - if (ret < 0) - return ret; - - if (nData1 != val) { - dev_err(tasdevice->dev, - "B[0x%x]P[0x%x]R[0x%x] W[0x%x], R[0x%x]\n", - book, page, reg, val, nData1); - tasdevice->err_code |= ERROR_YRAM_CRCCHK; - return -EAGAIN; - } - - ret = crc8(tasdevice->crc8_lkp_tbl, &val, 1, 0); - - return ret; -} - -/* Block type check. */ -static void set_err_prg_cfg(unsigned int type, struct tasdevice_priv *p) -{ - if ((type == MAIN_ALL_DEVICES) || (type == MAIN_DEVICE_A) || - (type == MAIN_DEVICE_B) || (type == MAIN_DEVICE_C) || - (type == MAIN_DEVICE_D)) - p->cur_prog = -1; - else - p->cur_conf = -1; -} - -/* Checksum for data bytes. */ -static int tasdev_bytes_chksum(struct tasdevice_priv *tas_priv, - struct tasdev_blk *block, unsigned char book, - unsigned char page, unsigned char reg, unsigned int len, - unsigned char val, unsigned char *crc_chksum) -{ - int ret; - - if (len > 1) - ret = tasdev_multibytes_chksum(tas_priv, book, page, reg, - len); - else - ret = do_singlereg_checksum(tas_priv, book, page, reg, val); - - if (ret > 0) { - *crc_chksum += ret; - goto end; - } - - if (ret != -EAGAIN) - goto end; - - block->nr_retry--; - if (block->nr_retry > 0) - goto end; - - set_err_prg_cfg(block->type, tas_priv); - -end: - return ret; -} - -/* Multi-data byte write. */ -static int tasdev_multibytes_wr(struct tasdevice_priv *tas_priv, - struct tasdev_blk *block, unsigned char book, - unsigned char page, unsigned char reg, unsigned char *data, - unsigned int len, unsigned int *nr_cmds, - unsigned char *crc_chksum) -{ - int ret; - - if (len > 1) { - ret = tasdevice_spi_dev_bulk_write(tas_priv, - TASDEVICE_REG(book, page, reg), data + 3, len); - if (ret < 0) - return ret; - if (block->is_ychksum_present) - ret = tasdev_bytes_chksum(tas_priv, block, - book, page, reg, len, 0, crc_chksum); - } else { - ret = tasdevice_spi_dev_write(tas_priv, - TASDEVICE_REG(book, page, reg), data[3]); - if (ret < 0) - return ret; - if (block->is_ychksum_present) - ret = tasdev_bytes_chksum(tas_priv, block, book, - page, reg, 1, data[3], crc_chksum); - } - - if (!block->is_ychksum_present || ret >= 0) { - *nr_cmds += 1; - if (len >= 2) - *nr_cmds += ((len - 2) / 4) + 1; - } - - return ret; -} - -/* Checksum for block. */ -static int tasdev_block_chksum(struct tasdevice_priv *tas_priv, - struct tasdev_blk *block) -{ - unsigned int nr_value; - int ret; - - ret = tasdevice_spi_dev_read(tas_priv, TASDEVICE_CHECKSUM, &nr_value); - if (ret < 0) { - dev_err(tas_priv->dev, "%s: read error %d.\n", __func__, ret); - set_err_prg_cfg(block->type, tas_priv); - return ret; - } - - if ((nr_value & 0xff) != block->pchksum) { - dev_err(tas_priv->dev, "%s: PChkSum err %d ", __func__, ret); - dev_err(tas_priv->dev, "PChkSum = 0x%x, Reg = 0x%x\n", - block->pchksum, (nr_value & 0xff)); - tas_priv->err_code |= ERROR_PRAM_CRCCHK; - ret = -EAGAIN; - block->nr_retry--; - - if (block->nr_retry <= 0) - set_err_prg_cfg(block->type, tas_priv); - } else { - tas_priv->err_code &= ~ERROR_PRAM_CRCCHK; - } - - return ret; -} - -/* Firmware block load function. */ -static int tasdev_load_blk(struct tasdevice_priv *tas_priv, - struct tasdev_blk *block) -{ - unsigned int sleep_time, len, nr_cmds; - unsigned char offset, book, page, val; - unsigned char *data = block->data; - unsigned char crc_chksum = 0; - int ret = 0; - - while (block->nr_retry > 0) { - if (block->is_pchksum_present) { - ret = tasdevice_spi_dev_write(tas_priv, - TASDEVICE_CHECKSUM, 0); - if (ret < 0) - break; - } - - if (block->is_ychksum_present) - crc_chksum = 0; - - nr_cmds = 0; - - while (nr_cmds < block->nr_cmds) { - data = block->data + nr_cmds * 4; - - book = data[0]; - page = data[1]; - offset = data[2]; - val = data[3]; - - nr_cmds++; - /* Single byte write */ - if (offset <= 0x7F) { - ret = tasdevice_spi_dev_write(tas_priv, - TASDEVICE_REG(book, page, offset), - val); - if (ret < 0) - break; - if (block->is_ychksum_present) { - ret = tasdev_bytes_chksum(tas_priv, - block, book, page, offset, - 1, val, &crc_chksum); - if (ret < 0) - break; - } - continue; - } - /* sleep command */ - if (offset == 0x81) { - /* book -- data[0] page -- data[1] */ - sleep_time = ((book << 8) + page)*1000; - fsleep(sleep_time); - continue; - } - /* Multiple bytes write */ - if (offset == 0x85) { - data += 4; - len = (book << 8) + page; - book = data[0]; - page = data[1]; - offset = data[2]; - ret = tasdev_multibytes_wr(tas_priv, - block, book, page, offset, data, - len, &nr_cmds, &crc_chksum); - if (ret < 0) - break; - } - } - if (ret == -EAGAIN) { - if (block->nr_retry > 0) - continue; - } else if (ret < 0) { - /* err in current device, skip it */ - break; - } - - if (block->is_pchksum_present) { - ret = tasdev_block_chksum(tas_priv, block); - if (ret == -EAGAIN) { - if (block->nr_retry > 0) - continue; - } else if (ret < 0) { - /* err in current device, skip it */ - break; - } - } - - if (block->is_ychksum_present) { - /* TBD, open it when FW ready */ - dev_err(tas_priv->dev, - "Blk YChkSum: FW = 0x%x, YCRC = 0x%x\n", - block->ychksum, crc_chksum); - - tas_priv->err_code &= - ~ERROR_YRAM_CRCCHK; - ret = 0; - } - /* skip current blk */ - break; - } - - return ret; -} - -/* Firmware block load function. */ -static int tasdevice_load_block(struct tasdevice_priv *tas_priv, - struct tasdev_blk *block) -{ - int ret = 0; - - block->nr_retry = 6; - if (tas_priv->is_loading == false) - return 0; - ret = tasdev_load_blk(tas_priv, block); - if (ret < 0) - dev_err(tas_priv->dev, "Blk (%d) load error\n", block->type); - - return ret; -} - -/* - * Select firmware binary parser & load callback functions by ppc3 version - * and firmware binary version. - */ -static int dspfw_default_callback(struct tasdevice_priv *tas_priv, - unsigned int drv_ver, unsigned int ppcver) -{ - int rc = 0; - - if (drv_ver == 0x100) { - if (ppcver >= PPC3_VERSION_BASE) { - tas_priv->fw_parse_variable_header = - fw_parse_variable_header_kernel; - tas_priv->fw_parse_program_data = - fw_parse_program_data_kernel; - tas_priv->fw_parse_configuration_data = - fw_parse_configuration_data_kernel; - tas_priv->tasdevice_load_block = - tasdevice_load_block_kernel; - } else if (ppcver == 0x00) { - tas_priv->fw_parse_variable_header = - fw_parse_variable_header_git; - tas_priv->fw_parse_program_data = - fw_parse_program_data; - tas_priv->fw_parse_configuration_data = - fw_parse_configuration_data; - tas_priv->tasdevice_load_block = - tasdevice_load_block; - } else { - dev_err(tas_priv->dev, - "Wrong PPCVer :0x%08x\n", ppcver); - rc = -EINVAL; - } - } else { - dev_err(tas_priv->dev, "Wrong DrvVer : 0x%02x\n", drv_ver); - rc = -EINVAL; - } - - return rc; -} - -/* DSP firmware binary file header parser function. */ -static int fw_parse_header(struct tasdevice_priv *tas_priv, - struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) -{ - struct tasdevice_dspfw_hdr *fw_hdr = &tas_fmw->fw_hdr; - struct tasdevice_fw_fixed_hdr *fw_fixed_hdr = &fw_hdr->fixed_hdr; - static const unsigned char magic_number[] = {0x35, 0x35, 0x35, 0x32, }; - const unsigned char *buf = (unsigned char *)fmw->data; - - if (offset + 92 > fmw->size) { - dev_err(tas_priv->dev, "%s: File Size error\n", __func__); - offset = -EINVAL; - goto out; - } - if (memcmp(&buf[offset], magic_number, 4)) { - dev_err(tas_priv->dev, "%s: Magic num NOT match\n", __func__); - offset = -EINVAL; - goto out; - } - offset += 4; - - /* - * Convert data[offset], data[offset + 1], data[offset + 2] and - * data[offset + 3] into host - */ - fw_fixed_hdr->fwsize = get_unaligned_be32(&buf[offset]); - offset += 4; - if (fw_fixed_hdr->fwsize != fmw->size) { - dev_err(tas_priv->dev, "File size not match, %lu %u", - (unsigned long)fmw->size, fw_fixed_hdr->fwsize); - offset = -EINVAL; - goto out; - } - offset += 4; - fw_fixed_hdr->ppcver = get_unaligned_be32(&buf[offset]); - offset += 8; - fw_fixed_hdr->drv_ver = get_unaligned_be32(&buf[offset]); - offset += 72; - -out: - return offset; -} - -/* DSP firmware binary file parser function. */ -static int tasdevice_dspfw_ready(const struct firmware *fmw, void *context) -{ - struct tasdevice_priv *tas_priv = context; - struct tasdevice_fw_fixed_hdr *fw_fixed_hdr; - struct tasdevice_fw *tas_fmw; - int offset = 0, ret = 0; - - if (!fmw || !fmw->data) { - dev_err(tas_priv->dev, "%s: Failed to read firmware %s\n", - __func__, tas_priv->coef_binaryname); - return -EINVAL; - } - - tas_priv->fmw = kzalloc(sizeof(*tas_priv->fmw), GFP_KERNEL); - if (!tas_priv->fmw) - return -ENOMEM; - tas_fmw = tas_priv->fmw; - tas_fmw->dev = tas_priv->dev; - offset = fw_parse_header(tas_priv, tas_fmw, fmw, offset); - - if (offset == -EINVAL) - return -EINVAL; - - fw_fixed_hdr = &tas_fmw->fw_hdr.fixed_hdr; - /* Support different versions of firmware */ - switch (fw_fixed_hdr->drv_ver) { - case 0x301: - case 0x302: - case 0x502: - case 0x503: - tas_priv->fw_parse_variable_header = - fw_parse_variable_header_kernel; - tas_priv->fw_parse_program_data = - fw_parse_program_data_kernel; - tas_priv->fw_parse_configuration_data = - fw_parse_configuration_data_kernel; - tas_priv->tasdevice_load_block = - tasdevice_load_block_kernel; - break; - case 0x202: - case 0x400: - tas_priv->fw_parse_variable_header = - fw_parse_variable_header_git; - tas_priv->fw_parse_program_data = - fw_parse_program_data; - tas_priv->fw_parse_configuration_data = - fw_parse_configuration_data; - tas_priv->tasdevice_load_block = - tasdevice_load_block; - break; - default: - ret = dspfw_default_callback(tas_priv, - fw_fixed_hdr->drv_ver, fw_fixed_hdr->ppcver); - if (ret) - return ret; - break; - } - - offset = tas_priv->fw_parse_variable_header(tas_priv, fmw, offset); - if (offset < 0) - return offset; - - offset = tas_priv->fw_parse_program_data(tas_priv, tas_fmw, fmw, - offset); - if (offset < 0) - return offset; - - offset = tas_priv->fw_parse_configuration_data(tas_priv, - tas_fmw, fmw, offset); - if (offset < 0) - ret = offset; - - return ret; -} - -/* DSP firmware binary file parser function. */ -int tasdevice_spi_dsp_parser(void *context) -{ - struct tasdevice_priv *tas_priv = context; - const struct firmware *fw_entry; - int ret; - - ret = request_firmware(&fw_entry, tas_priv->coef_binaryname, - tas_priv->dev); - if (ret) { - dev_err(tas_priv->dev, "%s: load %s error\n", __func__, - tas_priv->coef_binaryname); - return ret; - } - - ret = tasdevice_dspfw_ready(fw_entry, tas_priv); - release_firmware(fw_entry); - fw_entry = NULL; - - return ret; -} - -/* DSP firmware program block data remove function. */ -static void tasdev_dsp_prog_blk_remove(struct tasdevice_prog *prog) -{ - struct tasdevice_data *tas_dt; - struct tasdev_blk *blk; - unsigned int i; - - if (!prog) - return; - - tas_dt = &prog->dev_data; - - if (!tas_dt->dev_blks) - return; - - for (i = 0; i < tas_dt->nr_blk; i++) { - blk = &tas_dt->dev_blks[i]; - kfree(blk->data); - } - kfree(tas_dt->dev_blks); -} - -/* DSP firmware program block data remove function. */ -static void tasdev_dsp_prog_remove(struct tasdevice_prog *prog, - unsigned short nr) -{ - int i; - - for (i = 0; i < nr; i++) - tasdev_dsp_prog_blk_remove(&prog[i]); - kfree(prog); -} - -/* DSP firmware config block data remove function. */ -static void tasdev_dsp_cfg_blk_remove(struct tasdevice_config *cfg) -{ - struct tasdevice_data *tas_dt; - struct tasdev_blk *blk; - unsigned int i; - - if (cfg) { - tas_dt = &cfg->dev_data; - - if (!tas_dt->dev_blks) - return; - - for (i = 0; i < tas_dt->nr_blk; i++) { - blk = &tas_dt->dev_blks[i]; - kfree(blk->data); - } - kfree(tas_dt->dev_blks); - } -} - -/* DSP firmware config remove function. */ -static void tasdev_dsp_cfg_remove(struct tasdevice_config *config, - unsigned short nr) -{ - int i; - - for (i = 0; i < nr; i++) - tasdev_dsp_cfg_blk_remove(&config[i]); - kfree(config); -} - -/* DSP firmware remove function. */ -void tasdevice_spi_dsp_remove(void *context) -{ - struct tasdevice_priv *tas_dev = context; - - if (!tas_dev->fmw) - return; - - if (tas_dev->fmw->programs) - tasdev_dsp_prog_remove(tas_dev->fmw->programs, - tas_dev->fmw->nr_programs); - if (tas_dev->fmw->configs) - tasdev_dsp_cfg_remove(tas_dev->fmw->configs, - tas_dev->fmw->nr_configurations); - kfree(tas_dev->fmw); - tas_dev->fmw = NULL; -} - -/* DSP firmware calibration data remove function. */ -static void tas2781_clear_calfirmware(struct tasdevice_fw *tas_fmw) -{ - struct tasdevice_calibration *calibration; - struct tasdev_blk *block; - unsigned int blks; - int i; - - if (!tas_fmw->calibrations) - goto out; - - for (i = 0; i < tas_fmw->nr_calibrations; i++) { - calibration = &tas_fmw->calibrations[i]; - if (!calibration) - continue; - - if (!calibration->dev_data.dev_blks) - continue; - - for (blks = 0; blks < calibration->dev_data.nr_blk; blks++) { - block = &calibration->dev_data.dev_blks[blks]; - if (!block) - continue; - kfree(block->data); - } - kfree(calibration->dev_data.dev_blks); - } - kfree(tas_fmw->calibrations); -out: - kfree(tas_fmw); -} - -/* Calibration data from firmware remove function. */ -void tasdevice_spi_calbin_remove(void *context) -{ - struct tasdevice_priv *tas_priv = context; - - if (tas_priv->cali_data_fmw) { - tas2781_clear_calfirmware(tas_priv->cali_data_fmw); - tas_priv->cali_data_fmw = NULL; - } -} - -/* Configuration remove function. */ -void tasdevice_spi_config_info_remove(void *context) -{ - struct tasdevice_priv *tas_priv = context; - struct tasdevice_rca *rca = &tas_priv->rcabin; - struct tasdevice_config_info **ci = rca->cfg_info; - unsigned int i, j; - - if (!ci) - return; - for (i = 0; i < rca->ncfgs; i++) { - if (!ci[i]) - continue; - if (ci[i]->blk_data) { - for (j = 0; j < ci[i]->real_nblocks; j++) { - if (!ci[i]->blk_data[j]) - continue; - kfree(ci[i]->blk_data[j]->regdata); - kfree(ci[i]->blk_data[j]); - } - kfree(ci[i]->blk_data); - } - kfree(ci[i]); - } - kfree(ci); -} - -/* DSP firmware program block data load function. */ -static int tasdevice_load_data(struct tasdevice_priv *tas_priv, - struct tasdevice_data *dev_data) -{ - struct tasdev_blk *block; - unsigned int i; - int ret = 0; - - for (i = 0; i < dev_data->nr_blk; i++) { - block = &dev_data->dev_blks[i]; - ret = tas_priv->tasdevice_load_block(tas_priv, block); - if (ret < 0) - break; - } - - return ret; -} - -/* DSP firmware program load interface function. */ -int tasdevice_spi_prmg_load(void *context, int prm_no) -{ - struct tasdevice_priv *tas_priv = context; - struct tasdevice_fw *tas_fmw = tas_priv->fmw; - struct tasdevice_prog *program; - struct tasdevice_config *conf; - int ret = 0; - - if (!tas_fmw) { - dev_err(tas_priv->dev, "%s: Firmware is NULL\n", __func__); - return -EINVAL; - } - if (prm_no >= 0 && prm_no <= tas_fmw->nr_programs) { - tas_priv->cur_conf = 0; - tas_priv->is_loading = true; - program = &tas_fmw->programs[prm_no]; - ret = tasdevice_load_data(tas_priv, &program->dev_data); - if (ret < 0) { - dev_err(tas_priv->dev, "Program failed %d.\n", ret); - return ret; - } - tas_priv->cur_prog = prm_no; - - conf = &tas_fmw->configs[tas_priv->cur_conf]; - ret = tasdevice_load_data(tas_priv, &conf->dev_data); - if (ret < 0) - dev_err(tas_priv->dev, "Config failed %d.\n", ret); - } else { - dev_err(tas_priv->dev, - "%s: prm(%d) is not in range of Programs %u\n", - __func__, prm_no, tas_fmw->nr_programs); - return -EINVAL; - } - - return ret; -} - -/* RCABIN configuration switch interface function. */ -void tasdevice_spi_tuning_switch(void *context, int state) -{ - struct tasdevice_priv *tas_priv = context; - int profile_cfg_id = tas_priv->rcabin.profile_cfg_id; - - if (tas_priv->fw_state == TASDEVICE_DSP_FW_FAIL) { - dev_err(tas_priv->dev, "DSP bin file not loaded\n"); - return; - } - - if (state == 0) - tasdevice_spi_select_cfg_blk(tas_priv, profile_cfg_id, - TASDEVICE_BIN_BLK_PRE_POWER_UP); - else - tasdevice_spi_select_cfg_blk(tas_priv, profile_cfg_id, - TASDEVICE_BIN_BLK_PRE_SHUTDOWN); -} diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 40bb7a1d44bc..2e5b03be2f20 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -260,6 +260,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_TAS2770 imply SND_SOC_TAS2780 imply SND_SOC_TAS2781_COMLIB + imply SND_SOC_TAS2781_COMLIB_I2C imply SND_SOC_TAS2781_FMWLIB imply SND_SOC_TAS2781_I2C imply SND_SOC_TAS5086 @@ -1991,20 +1992,23 @@ config SND_SOC_TAS2780 digital input mono Class-D audio power amplifiers. config SND_SOC_TAS2781_COMLIB + tristate + +config SND_SOC_TAS2781_COMLIB_I2C depends on I2C select CRC8 select REGMAP_I2C tristate config SND_SOC_TAS2781_FMWLIB - depends on SND_SOC_TAS2781_COMLIB + select SND_SOC_TAS2781_COMLIB tristate default n config SND_SOC_TAS2781_I2C tristate "Texas Instruments TAS2781 speaker amplifier based on I2C" depends on I2C - select SND_SOC_TAS2781_COMLIB + select SND_SOC_TAS2781_COMLIB_I2C select SND_SOC_TAS2781_FMWLIB help Enable support for Texas Instruments TAS2781 Smart Amplifier diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 10f726066b6c..337d72c435f4 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -305,6 +305,7 @@ snd-soc-tas6424-y := tas6424.o snd-soc-tda7419-y := tda7419.o snd-soc-tas2770-y := tas2770.o snd-soc-tas2781-comlib-y := tas2781-comlib.o +snd-soc-tas2781-comlib-i2c-y := tas2781-comlib-i2c.o snd-soc-tas2781-fmwlib-y := tas2781-fmwlib.o snd-soc-tas2781-i2c-y := tas2781-i2c.o snd-soc-tfa9879-y := tfa9879.o @@ -713,6 +714,7 @@ obj-$(CONFIG_SND_SOC_TAS2562) += snd-soc-tas2562.o obj-$(CONFIG_SND_SOC_TAS2764) += snd-soc-tas2764.o obj-$(CONFIG_SND_SOC_TAS2780) += snd-soc-tas2780.o obj-$(CONFIG_SND_SOC_TAS2781_COMLIB) += snd-soc-tas2781-comlib.o +obj-$(CONFIG_SND_SOC_TAS2781_COMLIB_I2C) += snd-soc-tas2781-comlib-i2c.o obj-$(CONFIG_SND_SOC_TAS2781_FMWLIB) += snd-soc-tas2781-fmwlib.o obj-$(CONFIG_SND_SOC_TAS2781_I2C) += snd-soc-tas2781-i2c.o obj-$(CONFIG_SND_SOC_TAS5086) += snd-soc-tas5086.o diff --git a/sound/soc/codecs/tas2781-comlib-i2c.c b/sound/soc/codecs/tas2781-comlib-i2c.c new file mode 100644 index 000000000000..a75b812618ee --- /dev/null +++ b/sound/soc/codecs/tas2781-comlib-i2c.c @@ -0,0 +1,375 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// TAS2563/TAS2781 Common functions for HDA and ASoC Audio drivers based on I2C +// +// Copyright 2025 Texas Instruments, Inc. +// +// Author: Shenghao Ding <shenghao-ding(a)ti.com> + +#include <linux/crc8.h> +#include <linux/firmware.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/tas2781.h> +#include <sound/tas2781-comlib-i2c.h> + +static const struct regmap_range_cfg tasdevice_ranges[] = { + { + .range_min = 0, + .range_max = 256 * 128, + .selector_reg = TASDEVICE_PAGE_SELECT, + .selector_mask = 0xff, + .selector_shift = 0, + .window_start = 0, + .window_len = 128, + }, +}; + +static const struct regmap_config tasdevice_regmap = { + .reg_bits = 8, + .val_bits = 8, + .cache_type = REGCACHE_NONE, + .ranges = tasdevice_ranges, + .num_ranges = ARRAY_SIZE(tasdevice_ranges), + .max_register = 256 * 128, +}; + +static int tasdevice_change_chn_book(struct tasdevice_priv *tas_priv, + unsigned short chn, int book) +{ + struct i2c_client *client = (struct i2c_client *)tas_priv->client; + int ret = 0; + + if (chn < tas_priv->ndev) { + struct tasdevice *tasdev = &tas_priv->tasdevice[chn]; + struct regmap *map = tas_priv->regmap; + + if (client->addr != tasdev->dev_addr) { + client->addr = tasdev->dev_addr; + /* All tas2781s share the same regmap, clear the page + * inside regmap once switching to another tas2781. + * Register 0 at any pages and any books inside tas2781 + * is the same one for page-switching. + */ + ret = regmap_write(map, TASDEVICE_PAGE_SELECT, 0); + if (ret < 0) { + dev_err(tas_priv->dev, "%s, E=%d channel:%d\n", + __func__, ret, chn); + goto out; + } + } + + if (tasdev->cur_book != book) { + ret = regmap_write(map, TASDEVICE_BOOKCTL_REG, book); + if (ret < 0) { + dev_err(tas_priv->dev, "%s, E=%d\n", + __func__, ret); + goto out; + } + tasdev->cur_book = book; + } + } else { + ret = -EINVAL; + dev_err(tas_priv->dev, "%s, no such channel(%d)\n", __func__, + chn); + } + +out: + return ret; +} + +int tasdev_chn_switch(struct tasdevice_priv *tas_priv, + unsigned short chn) +{ + struct i2c_client *client = (struct i2c_client *)tas_priv->client; + struct tasdevice *tasdev = &tas_priv->tasdevice[chn]; + struct regmap *map = tas_priv->regmap; + int ret; + + if (client->addr != tasdev->dev_addr) { + client->addr = tasdev->dev_addr; + /* All devices share the same regmap, clear the page + * inside regmap once switching to another device. + * Register 0 at any pages and any books inside tas2781 + * is the same one for page-switching. + */ + ret = regmap_write(map, TASDEVICE_PAGE_SELECT, 0); + if (ret < 0) { + dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret); + return ret; + } + return 1; + } + return 0; +} +EXPORT_SYMBOL_GPL(tasdev_chn_switch); + +int tasdevice_dev_update_bits( + struct tasdevice_priv *tas_priv, unsigned short chn, + unsigned int reg, unsigned int mask, unsigned int value) +{ + int ret = 0; + + if (chn < tas_priv->ndev) { + struct regmap *map = tas_priv->regmap; + + ret = tas_priv->change_chn_book(tas_priv, chn, + TASDEVICE_BOOK_ID(reg)); + if (ret < 0) + goto out; + + ret = regmap_update_bits(map, TASDEVICE_PGRG(reg), + mask, value); + if (ret < 0) + dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret); + } else { + dev_err(tas_priv->dev, "%s, no such channel(%d)\n", __func__, + chn); + ret = -EINVAL; + } + +out: + return ret; +} +EXPORT_SYMBOL_GPL(tasdevice_dev_update_bits); + +struct tasdevice_priv *tasdevice_kzalloc(struct i2c_client *i2c) +{ + struct tasdevice_priv *tas_priv; + + tas_priv = devm_kzalloc(&i2c->dev, sizeof(*tas_priv), GFP_KERNEL); + if (!tas_priv) + return NULL; + tas_priv->dev = &i2c->dev; + tas_priv->client = (void *)i2c; + + return tas_priv; +} +EXPORT_SYMBOL_GPL(tasdevice_kzalloc); + +int tasdevice_init(struct tasdevice_priv *tas_priv) +{ + int ret = 0; + int i; + + tas_priv->regmap = devm_regmap_init_i2c(tas_priv->client, + &tasdevice_regmap); + if (IS_ERR(tas_priv->regmap)) { + ret = PTR_ERR(tas_priv->regmap); + dev_err(tas_priv->dev, "Failed to allocate register map: %d\n", + ret); + goto out; + } + + tas_priv->cur_prog = -1; + tas_priv->cur_conf = -1; + tas_priv->isspi = false; + + for (i = 0; i < tas_priv->ndev; i++) { + tas_priv->tasdevice[i].cur_book = -1; + tas_priv->tasdevice[i].cur_prog = -1; + tas_priv->tasdevice[i].cur_conf = -1; + } + + tas_priv->update_bits = tasdevice_dev_update_bits; + tas_priv->change_chn_book = tasdevice_change_chn_book; + tas_priv->dev_read = tasdevice_dev_read; + tas_priv->dev_bulk_read = tasdevice_dev_bulk_read; + + mutex_init(&tas_priv->codec_lock); + +out: + return ret; +} +EXPORT_SYMBOL_GPL(tasdevice_init); + +static int tasdevice_clamp(int val, int max, unsigned int invert) +{ + if (val > max) + val = max; + if (invert) + val = max - val; + if (val < 0) + val = 0; + return val; +} + +int tasdevice_amp_putvol(struct tasdevice_priv *tas_priv, + struct snd_ctl_elem_value *ucontrol, struct soc_mixer_control *mc) +{ + unsigned int invert = mc->invert; + unsigned char mask; + int max = mc->max; + int err_cnt = 0; + int val, i, ret; + + mask = (1 << fls(max)) - 1; + mask <<= mc->shift; + val = tasdevice_clamp(ucontrol->value.integer.value[0], max, invert); + for (i = 0; i < tas_priv->ndev; i++) { + ret = tasdevice_dev_update_bits(tas_priv, i, + mc->reg, mask, (unsigned int)(val << mc->shift)); + if (!ret) + continue; + err_cnt++; + dev_err(tas_priv->dev, "set AMP vol error in dev %d\n", i); + } + + /* All the devices set error, return 0 */ + return (err_cnt == tas_priv->ndev) ? 0 : 1; +} +EXPORT_SYMBOL_GPL(tasdevice_amp_putvol); + +int tasdevice_amp_getvol(struct tasdevice_priv *tas_priv, + struct snd_ctl_elem_value *ucontrol, struct soc_mixer_control *mc) +{ + unsigned int invert = mc->invert; + unsigned char mask = 0; + int max = mc->max; + int ret = 0; + int val; + + /* Read the primary device */ + ret = tasdevice_dev_read(tas_priv, 0, mc->reg, &val); + if (ret) { + dev_err(tas_priv->dev, "%s, get AMP vol error\n", __func__); + goto out; + } + + mask = (1 << fls(max)) - 1; + mask <<= mc->shift; + val = (val & mask) >> mc->shift; + val = tasdevice_clamp(val, max, invert); + ucontrol->value.integer.value[0] = val; + +out: + return ret; + +} +EXPORT_SYMBOL_GPL(tasdevice_amp_getvol); + +int tasdevice_digital_getvol(struct tasdevice_priv *tas_priv, + struct snd_ctl_elem_value *ucontrol, struct soc_mixer_control *mc) +{ + unsigned int invert = mc->invert; + int max = mc->max; + int ret, val; + + /* Read the primary device as the whole */ + ret = tasdevice_dev_read(tas_priv, 0, mc->reg, &val); + if (ret) { + dev_err(tas_priv->dev, "%s, get digital vol error\n", + __func__); + goto out; + } + + val = tasdevice_clamp(val, max, invert); + ucontrol->value.integer.value[0] = val; + +out: + return ret; + +} +EXPORT_SYMBOL_GPL(tasdevice_digital_getvol); + +int tasdevice_digital_putvol(struct tasdevice_priv *tas_priv, + struct snd_ctl_elem_value *ucontrol, struct soc_mixer_control *mc) +{ + unsigned int invert = mc->invert; + int max = mc->max; + int err_cnt = 0; + int ret; + int val, i; + + val = tasdevice_clamp(ucontrol->value.integer.value[0], max, invert); + + for (i = 0; i < tas_priv->ndev; i++) { + ret = tasdevice_dev_write(tas_priv, i, mc->reg, + (unsigned int)val); + if (!ret) + continue; + err_cnt++; + dev_err(tas_priv->dev, + "set digital vol err in dev %d\n", i); + } + + /* All the devices set error, return 0 */ + return (err_cnt == tas_priv->ndev) ? 0 : 1; + +} +EXPORT_SYMBOL_GPL(tasdevice_digital_putvol); + +void tasdevice_reset(struct tasdevice_priv *tas_dev) +{ + int ret, i; + + if (tas_dev->reset) { + gpiod_set_value_cansleep(tas_dev->reset, 0); + usleep_range(500, 1000); + gpiod_set_value_cansleep(tas_dev->reset, 1); + } else { + for (i = 0; i < tas_dev->ndev; i++) { + ret = tasdevice_dev_write(tas_dev, i, + TASDEVICE_REG_SWRESET, + TASDEVICE_REG_SWRESET_RESET); + if (ret < 0) + dev_err(tas_dev->dev, + "dev %d swreset fail, %d\n", + i, ret); + } + } + usleep_range(1000, 1050); +} +EXPORT_SYMBOL_GPL(tasdevice_reset); + +int tascodec_init(struct tasdevice_priv *tas_priv, void *codec, + struct module *module, + void (*cont)(const struct firmware *fw, void *context)) +{ + int ret = 0; + + /* Codec Lock Hold to ensure that codec_probe and firmware parsing and + * loading do not simultaneously execute. + */ + mutex_lock(&tas_priv->codec_lock); + + if (tas_priv->name_prefix) + scnprintf(tas_priv->rca_binaryname, 64, "%s-%sRCA%d.bin", + tas_priv->name_prefix, tas_priv->dev_name, + tas_priv->ndev); + else + scnprintf(tas_priv->rca_binaryname, 64, "%sRCA%d.bin", + tas_priv->dev_name, tas_priv->ndev); + crc8_populate_msb(tas_priv->crc8_lkp_tbl, TASDEVICE_CRC8_POLYNOMIAL); + tas_priv->codec = codec; + ret = request_firmware_nowait(module, FW_ACTION_UEVENT, + tas_priv->rca_binaryname, tas_priv->dev, GFP_KERNEL, tas_priv, + cont); + if (ret) + dev_err(tas_priv->dev, "request_firmware_nowait err:0x%08x\n", + ret); + + /* Codec Lock Release*/ + mutex_unlock(&tas_priv->codec_lock); + return ret; +} +EXPORT_SYMBOL_GPL(tascodec_init); + +void tasdevice_remove(struct tasdevice_priv *tas_priv) +{ + mutex_destroy(&tas_priv->codec_lock); +} +EXPORT_SYMBOL_GPL(tasdevice_remove); + +MODULE_DESCRIPTION("TAS2781 common library for I2C"); +MODULE_AUTHOR("Shenghao Ding, TI, <shenghao-ding(a)ti.com>"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/tas2781-comlib.c b/sound/soc/codecs/tas2781-comlib.c index 1e0b3aa95749..ad2f65359b15 100644 --- a/sound/soc/codecs/tas2781-comlib.c +++ b/sound/soc/codecs/tas2781-comlib.c @@ -2,14 +2,14 @@ // // TAS2563/TAS2781 Common functions for HDA and ASoC Audio drivers // -// Copyright 2023 - 2024 Texas Instruments, Inc. +// Copyright 2023 - 2025 Texas Instruments, Inc. // // Author: Shenghao Ding <shenghao-ding(a)ti.com> #include <linux/crc8.h> +#include <linux/dev_printk.h> #include <linux/firmware.h> #include <linux/gpio/consumer.h> -#include <linux/i2c.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/module.h> @@ -17,67 +17,24 @@ #include <linux/of_irq.h> #include <linux/regmap.h> #include <linux/slab.h> -#include <sound/pcm_params.h> -#include <sound/soc.h> #include <sound/tas2781.h> -#define TASDEVICE_CRC8_POLYNOMIAL 0x4d - -static const struct regmap_range_cfg tasdevice_ranges[] = { - { - .range_min = 0, - .range_max = 256 * 128, - .selector_reg = TASDEVICE_PAGE_SELECT, - .selector_mask = 0xff, - .selector_shift = 0, - .window_start = 0, - .window_len = 128, - }, -}; - -static const struct regmap_config tasdevice_regmap = { - .reg_bits = 8, - .val_bits = 8, - .cache_type = REGCACHE_NONE, - .ranges = tasdevice_ranges, - .num_ranges = ARRAY_SIZE(tasdevice_ranges), - .max_register = 256 * 128, -}; - -static int tasdevice_change_chn_book(struct tasdevice_priv *tas_priv, - unsigned short chn, int book) +int tasdevice_dev_read(struct tasdevice_priv *tas_priv, + unsigned short chn, unsigned int reg, unsigned int *val) { - struct i2c_client *client = (struct i2c_client *)tas_priv->client; int ret = 0; if (chn < tas_priv->ndev) { - struct tasdevice *tasdev = &tas_priv->tasdevice[chn]; struct regmap *map = tas_priv->regmap; - if (client->addr != tasdev->dev_addr) { - client->addr = tasdev->dev_addr; - /* All tas2781s share the same regmap, clear the page - * inside regmap once switching to another tas2781. - * Register 0 at any pages and any books inside tas2781 - * is the same one for page-switching. - */ - ret = regmap_write(map, TASDEVICE_PAGE_SELECT, 0); - if (ret < 0) { - dev_err(tas_priv->dev, "%s, E=%d channel:%d\n", - __func__, ret, chn); - goto out; - } - } + ret = tas_priv->change_chn_book(tas_priv, chn, + TASDEVICE_BOOK_ID(reg)); + if (ret < 0) + goto out; - if (tasdev->cur_book != book) { - ret = regmap_write(map, TASDEVICE_BOOKCTL_REG, book); - if (ret < 0) { - dev_err(tas_priv->dev, "%s, E=%d\n", - __func__, ret); - goto out; - } - tasdev->cur_book = book; - } + ret = regmap_read(map, TASDEVICE_PGRG(reg), val); + if (ret < 0) + dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret); } else { ret = -EINVAL; dev_err(tas_priv->dev, "%s, no such channel(%d)\n", __func__, @@ -87,59 +44,33 @@ static int tasdevice_change_chn_book(struct tasdevice_priv *tas_priv, out: return ret; } +EXPORT_SYMBOL_GPL(tasdevice_dev_read); -int tasdev_chn_switch(struct tasdevice_priv *tas_priv, - unsigned short chn) -{ - struct i2c_client *client = (struct i2c_client *)tas_priv->client; - struct tasdevice *tasdev = &tas_priv->tasdevice[chn]; - struct regmap *map = tas_priv->regmap; - int ret; - - if (client->addr != tasdev->dev_addr) { - client->addr = tasdev->dev_addr; - /* All devices share the same regmap, clear the page - * inside regmap once switching to another device. - * Register 0 at any pages and any books inside tas2781 - * is the same one for page-switching. - */ - ret = regmap_write(map, TASDEVICE_PAGE_SELECT, 0); - if (ret < 0) { - dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret); - return ret; - } - return 1; - } - return 0; -} -EXPORT_SYMBOL_GPL(tasdev_chn_switch); - -int tasdevice_dev_read(struct tasdevice_priv *tas_priv, - unsigned short chn, unsigned int reg, unsigned int *val) +int tasdevice_dev_bulk_read(struct tasdevice_priv *tas_priv, + unsigned short chn, unsigned int reg, unsigned char *data, + unsigned int len) { int ret = 0; if (chn < tas_priv->ndev) { struct regmap *map = tas_priv->regmap; - ret = tasdevice_change_chn_book(tas_priv, chn, + ret = tas_priv->change_chn_book(tas_priv, chn, TASDEVICE_BOOK_ID(reg)); if (ret < 0) goto out; - ret = regmap_read(map, TASDEVICE_PGRG(reg), val); + ret = regmap_bulk_read(map, TASDEVICE_PGRG(reg), data, len); if (ret < 0) dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret); - } else { - ret = -EINVAL; + } else dev_err(tas_priv->dev, "%s, no such channel(%d)\n", __func__, chn); - } out: return ret; } -EXPORT_SYMBOL_GPL(tasdevice_dev_read); +EXPORT_SYMBOL_GPL(tasdevice_dev_bulk_read); int tasdevice_dev_write(struct tasdevice_priv *tas_priv, unsigned short chn, unsigned int reg, unsigned int value) @@ -149,7 +80,7 @@ int tasdevice_dev_write(struct tasdevice_priv *tas_priv, if (chn < tas_priv->ndev) { struct regmap *map = tas_priv->regmap; - ret = tasdevice_change_chn_book(tas_priv, chn, + ret = tas_priv->change_chn_book(tas_priv, chn, TASDEVICE_BOOK_ID(reg)); if (ret < 0) goto out; @@ -179,7 +110,7 @@ int tasdevice_dev_bulk_write( if (chn < tas_priv->ndev) { struct regmap *map = tas_priv->regmap; - ret = tasdevice_change_chn_book(tas_priv, chn, + ret = tas_priv->change_chn_book(tas_priv, chn, TASDEVICE_BOOK_ID(reg)); if (ret < 0) goto out; @@ -199,160 +130,20 @@ int tasdevice_dev_bulk_write( } EXPORT_SYMBOL_GPL(tasdevice_dev_bulk_write); -int tasdevice_dev_bulk_read(struct tasdevice_priv *tas_priv, - unsigned short chn, unsigned int reg, unsigned char *data, - unsigned int len) -{ - int ret = 0; - - if (chn < tas_priv->ndev) { - struct regmap *map = tas_priv->regmap; - - ret = tasdevice_change_chn_book(tas_priv, chn, - TASDEVICE_BOOK_ID(reg)); - if (ret < 0) - goto out; - - ret = regmap_bulk_read(map, TASDEVICE_PGRG(reg), data, len); - if (ret < 0) - dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret); - } else - dev_err(tas_priv->dev, "%s, no such channel(%d)\n", __func__, - chn); - -out: - return ret; -} -EXPORT_SYMBOL_GPL(tasdevice_dev_bulk_read); - -int tasdevice_dev_update_bits( - struct tasdevice_priv *tas_priv, unsigned short chn, - unsigned int reg, unsigned int mask, unsigned int value) -{ - int ret = 0; - - if (chn < tas_priv->ndev) { - struct regmap *map = tas_priv->regmap; - - ret = tasdevice_change_chn_book(tas_priv, chn, - TASDEVICE_BOOK_ID(reg)); - if (ret < 0) - goto out; - - ret = regmap_update_bits(map, TASDEVICE_PGRG(reg), - mask, value); - if (ret < 0) - dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret); - } else { - dev_err(tas_priv->dev, "%s, no such channel(%d)\n", __func__, - chn); - ret = -EINVAL; - } - -out: - return ret; -} -EXPORT_SYMBOL_GPL(tasdevice_dev_update_bits); - -struct tasdevice_priv *tasdevice_kzalloc(struct i2c_client *i2c) -{ - struct tasdevice_priv *tas_priv; - - tas_priv = devm_kzalloc(&i2c->dev, sizeof(*tas_priv), GFP_KERNEL); - if (!tas_priv) - return NULL; - tas_priv->dev = &i2c->dev; - tas_priv->client = (void *)i2c; - - return tas_priv; -} -EXPORT_SYMBOL_GPL(tasdevice_kzalloc); - -void tasdevice_reset(struct tasdevice_priv *tas_dev) -{ - int ret, i; - - if (tas_dev->reset) { - gpiod_set_value_cansleep(tas_dev->reset, 0); - usleep_range(500, 1000); - gpiod_set_value_cansleep(tas_dev->reset, 1); - } else { - for (i = 0; i < tas_dev->ndev; i++) { - ret = tasdevice_dev_write(tas_dev, i, - TASDEVICE_REG_SWRESET, - TASDEVICE_REG_SWRESET_RESET); - if (ret < 0) - dev_err(tas_dev->dev, - "dev %d swreset fail, %d\n", - i, ret); - } - } - usleep_range(1000, 1050); -} -EXPORT_SYMBOL_GPL(tasdevice_reset); - -int tascodec_init(struct tasdevice_priv *tas_priv, void *codec, - struct module *module, - void (*cont)(const struct firmware *fw, void *context)) +int tasdevice_save_calibration(struct tasdevice_priv *tas_priv) { - int ret = 0; - - /* Codec Lock Hold to ensure that codec_probe and firmware parsing and - * loading do not simultaneously execute. - */ - mutex_lock(&tas_priv->codec_lock); - - if (tas_priv->name_prefix) - scnprintf(tas_priv->rca_binaryname, 64, "%s-%sRCA%d.bin", - tas_priv->name_prefix, tas_priv->dev_name, - tas_priv->ndev); - else - scnprintf(tas_priv->rca_binaryname, 64, "%sRCA%d.bin", - tas_priv->dev_name, tas_priv->ndev); - crc8_populate_msb(tas_priv->crc8_lkp_tbl, TASDEVICE_CRC8_POLYNOMIAL); - tas_priv->codec = codec; - ret = request_firmware_nowait(module, FW_ACTION_UEVENT, - tas_priv->rca_binaryname, tas_priv->dev, GFP_KERNEL, tas_priv, - cont); - if (ret) - dev_err(tas_priv->dev, "request_firmware_nowait err:0x%08x\n", - ret); - - /* Codec Lock Release*/ - mutex_unlock(&tas_priv->codec_lock); - return ret; + if (tas_priv->save_calibration) + return tas_priv->save_calibration(tas_priv); + return -EINVAL; } -EXPORT_SYMBOL_GPL(tascodec_init); +EXPORT_SYMBOL_GPL(tasdevice_save_calibration); -int tasdevice_init(struct tasdevice_priv *tas_priv) +void tasdevice_apply_calibration(struct tasdevice_priv *tas_priv) { - int ret = 0; - int i; - - tas_priv->regmap = devm_regmap_init_i2c(tas_priv->client, - &tasdevice_regmap); - if (IS_ERR(tas_priv->regmap)) { - ret = PTR_ERR(tas_priv->regmap); - dev_err(tas_priv->dev, "Failed to allocate register map: %d\n", - ret); - goto out; - } - - tas_priv->cur_prog = -1; - tas_priv->cur_conf = -1; - - for (i = 0; i < tas_priv->ndev; i++) { - tas_priv->tasdevice[i].cur_book = -1; - tas_priv->tasdevice[i].cur_prog = -1; - tas_priv->tasdevice[i].cur_conf = -1; - } - - mutex_init(&tas_priv->codec_lock); - -out: - return ret; + if (tas_priv->apply_calibration && tas_priv->cali_data.total_sz) + tas_priv->apply_calibration(tas_priv); } -EXPORT_SYMBOL_GPL(tasdevice_init); +EXPORT_SYMBOL_GPL(tasdevice_apply_calibration); static void tasdev_dsp_prog_blk_remove(struct tasdevice_prog *prog) { @@ -434,143 +225,6 @@ void tasdevice_dsp_remove(void *context) } EXPORT_SYMBOL_GPL(tasdevice_dsp_remove); -void tasdevice_remove(struct tasdevice_priv *tas_priv) -{ - mutex_destroy(&tas_priv->codec_lock); -} -EXPORT_SYMBOL_GPL(tasdevice_remove); - -int tasdevice_save_calibration(struct tasdevice_priv *tas_priv) -{ - if (tas_priv->save_calibration) - return tas_priv->save_calibration(tas_priv); - return -EINVAL; -} -EXPORT_SYMBOL_GPL(tasdevice_save_calibration); - -void tasdevice_apply_calibration(struct tasdevice_priv *tas_priv) -{ - if (tas_priv->apply_calibration && tas_priv->cali_data.total_sz) - tas_priv->apply_calibration(tas_priv); -} -EXPORT_SYMBOL_GPL(tasdevice_apply_calibration); - -static int tasdevice_clamp(int val, int max, unsigned int invert) -{ - if (val > max) - val = max; - if (invert) - val = max - val; - if (val < 0) - val = 0; - return val; -} - -int tasdevice_amp_putvol(struct tasdevice_priv *tas_priv, - struct snd_ctl_elem_value *ucontrol, struct soc_mixer_control *mc) -{ - unsigned int invert = mc->invert; - unsigned char mask; - int max = mc->max; - int err_cnt = 0; - int val, i, ret; - - mask = (1 << fls(max)) - 1; - mask <<= mc->shift; - val = tasdevice_clamp(ucontrol->value.integer.value[0], max, invert); - for (i = 0; i < tas_priv->ndev; i++) { - ret = tasdevice_dev_update_bits(tas_priv, i, - mc->reg, mask, (unsigned int)(val << mc->shift)); - if (!ret) - continue; - err_cnt++; - dev_err(tas_priv->dev, "set AMP vol error in dev %d\n", i); - } - - /* All the devices set error, return 0 */ - return (err_cnt == tas_priv->ndev) ? 0 : 1; -} -EXPORT_SYMBOL_GPL(tasdevice_amp_putvol); - -int tasdevice_amp_getvol(struct tasdevice_priv *tas_priv, - struct snd_ctl_elem_value *ucontrol, struct soc_mixer_control *mc) -{ - unsigned int invert = mc->invert; - unsigned char mask = 0; - int max = mc->max; - int ret = 0; - int val; - - /* Read the primary device */ - ret = tasdevice_dev_read(tas_priv, 0, mc->reg, &val); - if (ret) { - dev_err(tas_priv->dev, "%s, get AMP vol error\n", __func__); - goto out; - } - - mask = (1 << fls(max)) - 1; - mask <<= mc->shift; - val = (val & mask) >> mc->shift; - val = tasdevice_clamp(val, max, invert); - ucontrol->value.integer.value[0] = val; - -out: - return ret; - -} -EXPORT_SYMBOL_GPL(tasdevice_amp_getvol); - -int tasdevice_digital_putvol(struct tasdevice_priv *tas_priv, - struct snd_ctl_elem_value *ucontrol, struct soc_mixer_control *mc) -{ - unsigned int invert = mc->invert; - int max = mc->max; - int err_cnt = 0; - int ret; - int val, i; - - val = tasdevice_clamp(ucontrol->value.integer.value[0], max, invert); - - for (i = 0; i < tas_priv->ndev; i++) { - ret = tasdevice_dev_write(tas_priv, i, mc->reg, - (unsigned int)val); - if (!ret) - continue; - err_cnt++; - dev_err(tas_priv->dev, - "set digital vol err in dev %d\n", i); - } - - /* All the devices set error, return 0 */ - return (err_cnt == tas_priv->ndev) ? 0 : 1; - -} -EXPORT_SYMBOL_GPL(tasdevice_digital_putvol); - -int tasdevice_digital_getvol(struct tasdevice_priv *tas_priv, - struct snd_ctl_elem_value *ucontrol, struct soc_mixer_control *mc) -{ - unsigned int invert = mc->invert; - int max = mc->max; - int ret, val; - - /* Read the primary device as the whole */ - ret = tasdevice_dev_read(tas_priv, 0, mc->reg, &val); - if (ret) { - dev_err(tas_priv->dev, "%s, get digital vol error\n", - __func__); - goto out; - } - - val = tasdevice_clamp(val, max, invert); - ucontrol->value.integer.value[0] = val; - -out: - return ret; - -} -EXPORT_SYMBOL_GPL(tasdevice_digital_getvol); - MODULE_DESCRIPTION("TAS2781 common library"); MODULE_AUTHOR("Shenghao Ding, TI, <shenghao-ding(a)ti.com>"); MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/tas2781-fmwlib.c b/sound/soc/codecs/tas2781-fmwlib.c index 13a197468193..3dd76aff1b6e 100644 --- a/sound/soc/codecs/tas2781-fmwlib.c +++ b/sound/soc/codecs/tas2781-fmwlib.c @@ -803,8 +803,13 @@ static int tasdevice_process_block(void *context, unsigned char *data, chn = idx - 1; chnend = idx; } else { - chn = 0; - chnend = tas_priv->ndev; + if (tas_priv->isspi) { + chn = tas_priv->index; + chnend = chn + 1; + } else { + chn = 0; + chnend = tas_priv->ndev; + } } for (; chn < chnend; chn++) { @@ -896,7 +901,7 @@ static int tasdevice_process_block(void *context, unsigned char *data, is_err = true; break; } - rc = tasdevice_dev_update_bits(tas_priv, chn, + rc = tas_priv->update_bits(tas_priv, chn, TASDEVICE_REG(data[subblk_offset + 2], data[subblk_offset + 3], data[subblk_offset + 4]), @@ -1461,7 +1466,7 @@ static int tasdev_multibytes_chksum(struct tasdevice_priv *tasdevice, goto end; } - ret = tasdevice_dev_bulk_read(tasdevice, chn, + ret = tasdevice->dev_bulk_read(tasdevice, chn, TASDEVICE_REG(book, page, crc_data.offset), nBuf1, crc_data.len); if (ret < 0) @@ -1511,7 +1516,7 @@ static int do_singlereg_checksum(struct tasdevice_priv *tasdevice, in = check_yram(&crc_data, book, page, reg, 1); if (!in) goto end; - ret = tasdevice_dev_read(tasdevice, chl, + ret = tasdevice->dev_read(tasdevice, chl, TASDEVICE_REG(book, page, reg), &nData1); if (ret < 0) goto end; @@ -1615,7 +1620,7 @@ static int tasdev_block_chksum(struct tasdevice_priv *tas_priv, unsigned int nr_value; int ret; - ret = tasdevice_dev_read(tas_priv, chn, TASDEVICE_CHECKSUM_REG, + ret = tas_priv->dev_read(tas_priv, chn, TASDEVICE_CHECKSUM_REG, &nr_value); if (ret < 0) { dev_err(tas_priv->dev, "%s: Chn %d\n", __func__, chn); diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c index b950914b7d48..9a329c561a53 100644 --- a/sound/soc/codecs/tas2781-i2c.c +++ b/sound/soc/codecs/tas2781-i2c.c @@ -28,6 +28,7 @@ #include <sound/pcm_params.h> #include <sound/soc.h> #include <sound/tas2781.h> +#include <sound/tas2781-comlib-i2c.h> #include <sound/tlv.h> #include <sound/tas2563-tlv.h> #include <sound/tas2781-tlv.h> -- 2.43.0

2 1

[PATCH v2] ASoC: tas2781: Add a debufs node for acoustic tuning
by Shenghao Ding 30 Apr '25

30 Apr '25

"Acoustic Tuning" debufs node is a bridge to the acoustic tuning tool which can tune the chips' acoustic effect. Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- v2: - Implement the "Acoustic Tuning" as debugfs node instead of kcontrol. v1: - Add "Acoustic Tuning" kcontrol for acoustic tuning. --- include/sound/tas2781.h | 16 ++++ sound/soc/codecs/tas2781-i2c.c | 147 +++++++++++++++++++++++++++++++++ 2 files changed, 163 insertions(+) diff --git a/include/sound/tas2781.h b/include/sound/tas2781.h index eff011444cc8..907f89d24e97 100644 --- a/include/sound/tas2781.h +++ b/include/sound/tas2781.h @@ -159,10 +159,26 @@ struct calidata { unsigned int cali_dat_sz_per_dev; }; +#ifdef CONFIG_DEBUG_FS + #define TASDEV_DATA_PAYLOAD_SIZE 128 + struct acoustic_data { + unsigned char len; + unsigned char id; + unsigned char addr; + unsigned char book; + unsigned char page; + unsigned char reg; + unsigned char data[TASDEV_DATA_PAYLOAD_SIZE]; + }; +#endif + struct tasdevice_priv { struct tasdevice tasdevice[TASDEVICE_MAX_CHANNELS]; struct tasdevice_rca rcabin; struct calidata cali_data; +#ifdef CONFIG_DEBUG_FS + struct acoustic_data acou_data; +#endif struct tasdevice_fw *fmw; struct gpio_desc *speaker_id; struct gpio_desc *reset; diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c index b950914b7d48..e5b377539d44 100644 --- a/sound/soc/codecs/tas2781-i2c.c +++ b/sound/soc/codecs/tas2781-i2c.c @@ -14,6 +14,9 @@ // #include <linux/crc8.h> +#ifdef CONFIG_DEBUG_FS + #include <linux/debugfs.h> +#endif #include <linux/firmware.h> #include <linux/gpio/consumer.h> #include <linux/i2c.h> @@ -1422,10 +1425,149 @@ static int tasdevice_create_cali_ctrls(struct tasdevice_priv *priv) nctrls < i ? nctrls : i); } +#ifdef CONFIG_DEBUG_FS +/* + * This debugfs node is a bridge to the acoustic tuning application + * tool which can tune the chips' acoustic effect. + * + * package structure for PPC3 communications: + * Pkg len (1 byte) + * Pkg id (1 byte, 'r' or 'w') + * Dev id (1 byte, i2c address) + * Book id (1 byte) + * Page id (1 byte) + * Reg id (1 byte) + * switch (pkg id) { + * case 'w': + * 1 byte, length of data to read + * case 'r': + * data payload (1~128 bytes) + * } + */ +static ssize_t acoustic_ctl_read(struct file *file, char __user *to, + size_t count, loff_t *ppos) +{ + struct snd_soc_component *comp = file->private_data; + struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(comp); + struct acoustic_data *p = &tas_priv->acou_data; + int ret = -1; + + if (p->id == 'r' && p->len == count && count <= sizeof(*p)) + ret = simple_read_from_buffer(to, count, ppos, p, p->len); + else + dev_err(tas_priv->dev, "Not ready for get.\n"); + return ret; +} + +static ssize_t acoustic_ctl_write(struct file *file, + const char __user *from, size_t count, loff_t *ppos) +{ + struct snd_soc_component *comp = file->private_data; + struct tasdevice_priv *priv = snd_soc_component_get_drvdata(comp); + struct acoustic_data *p = &priv->acou_data; + unsigned int max_pkg_len = sizeof(*p); + unsigned char *src; + int j, len, reg, val; + unsigned short chn; + int ret = -1; + + if (count > sizeof(*p)) { + dev_err(priv->dev, "count(%u) is larger than max(%u).\n", + (unsigned int)count, max_pkg_len); + return ret; + } + + src = memdup_user(from, count); + if (IS_ERR(src)) + return PTR_ERR(src); + + if (src[0] > max_pkg_len && src[0] != count) { + dev_err(priv->dev, "pkg(%u), max(%u), count(%u) dismatch.\n", + src[0], max_pkg_len, (unsigned int)count); + ret = 0; + goto exit; + } + + switch (src[1]) { + case 'r': + /* length of data to read */ + len = src[6]; + break; + case 'w': + /* Skip 6 bytes for package type and register address */ + len = src[0] - 6; + break; + default: + dev_err(priv->dev, "%s Wrong code %02x.\n", __func__, src[1]); + ret = 0; + goto exit; + } + + if (len < 1) { + dev_err(priv->dev, "pkg fmt invalid %02x.\n", len); + ret = 0; + goto exit; + } + + for (j = 0; j < priv->ndev; j++) + if (src[2] == priv->tasdevice[j].dev_addr) { + chn = j; + break; + } + if (j >= priv->ndev) { + dev_err(priv->dev, "no such device 0x%02x.\n", src[2]); + ret = 0; + goto exit; + } + + reg = TASDEVICE_REG(src[3], src[4], src[5]); + + guard(mutex)(&priv->codec_lock); + + if (src[1] == 'w') { + if (len > 1) + ret = tasdevice_dev_bulk_write(priv, chn, reg, + &src[6], len); + else + ret = tasdevice_dev_write(priv, chn, reg, src[6]); + } else { + struct acoustic_data *p = &priv->acou_data; + + memcpy(p, src, 6); + if (len > 1) { + ret = tasdevice_dev_bulk_read(priv, chn, reg, + p->data, len); + } else { + ret = tasdevice_dev_read(priv, chn, reg, &val); + p->data[0] = val; + } + p->len = len + 6; + } + + if (ret) + dev_err(priv->dev, "i2c communication error.\n"); + else + ret = count; +exit: + kfree(src); + return ret; +} + +static const struct file_operations acoustic_ctl_fops = { + .open = simple_open, + .read = acoustic_ctl_read, + .write = acoustic_ctl_write, +}; +#endif + static void tasdevice_fw_ready(const struct firmware *fmw, void *context) { struct tasdevice_priv *tas_priv = context; +#ifdef CONFIG_DEBUG_FS + struct snd_soc_component *comp = tas_priv->codec; + struct dentry *debugfs_root = comp->debugfs_root; +#endif int ret = 0; int i; @@ -1499,6 +1641,11 @@ static void tasdevice_fw_ready(const struct firmware *fmw, tasdevice_prmg_load(tas_priv, 0); tas_priv->cur_prog = 0; + +#ifdef CONFIG_DEBUG_FS + debugfs_create_file("acoustic_control", 0644, debugfs_root, + comp, &acoustic_ctl_fops); +#endif out: if (tas_priv->fw_state == TASDEVICE_RCA_FW_OK) { /* If DSP FW fail, DSP kcontrol won't be created. */ -- 2.43.0

2 1

Bug: src/topology/data.c: - Uninitialized 'id', Maybe Coding Error
by GitHub issues - opened 29 Apr '25

29 Apr '25

alsa-project/alsa-lib issue #453 was opened from zkh8227: #Description During the code review, I detected an issue with an uninitialized variable in the src/topology/data.c file. In the following calls, I couldn't find an initialization operation for id. Is it possible that the intention here was to call parent->id? #Error Details Bug Type: Uninitialized Variable File Path: src/topology/data.c Line Number: 1905,1908 Code Snippet： 1883 char id[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; ........ 1900 if (tplg_verify_tuples(tplg, pos, tp->array, tp->size) < 0) { 1901 if (tuples) { 1902 err = tplg_ref_add(elem, SND_TPLG_TYPE_TOKEN, parent->id); 1903 if (err < 0) 1904 return err; 1905 err = tplg_ref_add(elem2, SND_TPLG_TYPE_TUPLE, id); 1906 if (err < 0) 1907 return err; 1908 err = tplg_ref_add(parent, SND_TPLG_TYPE_DATA, id); 1909 if (err < 0) 1910 return err; 1911 tuples = NULL; 1912 } Issue URL : https://github.com/alsa-project/alsa-lib/issues/453 Repository URL: https://github.com/alsa-project/alsa-lib

1 0

tegra: max98089: update cset names
by GitHub pull_request - opened 27 Apr '25

27 Apr '25

alsa-project/alsa-ucm-conf pull request #556 was opened from clamor-s: Adjust configs to match Linux kernel MAX98089 codec driver change. Fixes: 725570f9 ("ASoC: max98088: Remove duplicate DACs") Link to Linux kernel commit which caused regression: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/sou… Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/556 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/556.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH v1] ALSA: hda/tas2781: Remove tas2781_spi_fwlib.c and leverage SND_SOC_TAS2781_FMWLIB
by Shenghao Ding 26 Apr '25

26 Apr '25

Most codes in tas2781_spi_fwlib.c are same as tas2781-fmwlib.c, mainly for firmware parsing, only differece is the register reading, bit update and book switching in i2c and spi. The main purpose of this patch is for code cleaup and arrange the shared part for i2c and spi. Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- v1: - Move the definition of TASDEVICE_CRC8_POLYNOMIAL to tas2781.h for both SPI use. - Add isspi flag in the struct tasdevice_priv to distinguish SPI or I2C. - Define three register-read related methods due to the difference between SPI and I2C. For SPI-based TAS2781, it will have one-byte delay to read memory-mapped registers. During init, these three method will be initialized as spi or i2c register-read methods. - Define book-switching method due to the difference between SPI and I2C. - Add select SND_SOC_TAS2781_COMLIB & SND_SOC_TAS2781_FMWLIB for tas2781 hda spi driver in Kconfig. - remove tas2781-spi.h & tas2781_spi_fwlib.c. - remove tas2781_spi_fwlib.o in Makefile - Move the definition of TASDEVICE_CALIBRATION_DATA_NAME. - Remove the useless calib_data definition for code cleanup. - Define the TASDEV_CALIB_N definition in tas2781_hda.h for hda driver calibration. - Use TASDEV_CALIB_N instead of TAS2563_CAL_N. - Include tas2781.h instead of tas2781-dsp.h in tas2781_hda_spi.c. - Remove #include "tas2781-spi.h" in tas2781_hda_spi.c. - Move the macro definitions only for hda spi tas2781 driver into tas2781_hda_spi.c. - Add read_flag_mask and reg_shift setting in tasdevice_regmap. --- include/sound/tas2781.h | 13 + sound/pci/hda/Kconfig | 2 + sound/pci/hda/Makefile | 2 +- sound/pci/hda/tas2781-spi.h | 157 --- sound/pci/hda/tas2781_hda.h | 3 + sound/pci/hda/tas2781_hda_i2c.c | 25 +- sound/pci/hda/tas2781_hda_spi.c | 540 ++++---- sound/pci/hda/tas2781_spi_fwlib.c | 2006 ----------------------------- sound/soc/codecs/tas2781-comlib.c | 18 +- sound/soc/codecs/tas2781-fmwlib.c | 17 +- 10 files changed, 320 insertions(+), 2463 deletions(-) delete mode 100644 sound/pci/hda/tas2781-spi.h delete mode 100644 sound/pci/hda/tas2781_spi_fwlib.c diff --git a/include/sound/tas2781.h b/include/sound/tas2781.h index eff011444cc8..a86a82f4c544 100644 --- a/include/sound/tas2781.h +++ b/include/sound/tas2781.h @@ -32,6 +32,8 @@ SNDRV_PCM_FMTBIT_S24_LE | \ SNDRV_PCM_FMTBIT_S32_LE) +#define TASDEVICE_CRC8_POLYNOMIAL 0x4d + /* PAGE Control Register (available in page0 of each book) */ #define TASDEVICE_PAGE_SELECT 0x00 #define TASDEVICE_BOOKCTL_PAGE 0x00 @@ -193,6 +195,7 @@ struct tasdevice_priv { bool force_fwload_status; bool playback_started; bool isacpi; + bool isspi; bool is_user_space_calidata; unsigned int global_addr; @@ -210,6 +213,16 @@ struct tasdevice_priv { int (*tasdevice_load_block)(struct tasdevice_priv *tas_priv, struct tasdev_blk *block); + int (*change_chn_book)(struct tasdevice_priv *tas_priv, + unsigned short chn, int book); + int (*update_bits)(struct tasdevice_priv *tas_priv, + unsigned short chn, unsigned int reg, unsigned int mask, + unsigned int value); + int (*dev_read)(struct tasdevice_priv *tas_priv, + unsigned short chn, unsigned int reg, unsigned int *value); + int (*dev_bulk_read)(struct tasdevice_priv *tas_priv, + unsigned short chn, unsigned int reg, unsigned char *p_data, + unsigned int n_length); int (*save_calibration)(struct tasdevice_priv *tas_priv); void (*apply_calibration)(struct tasdevice_priv *tas_priv); }; diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig index 9c427270ff4f..90f12e0227eb 100644 --- a/sound/pci/hda/Kconfig +++ b/sound/pci/hda/Kconfig @@ -210,6 +210,8 @@ config SND_HDA_SCODEC_TAS2781_SPI depends on ACPI depends on EFI depends on SND_SOC + select SND_SOC_TAS2781_COMLIB + select SND_SOC_TAS2781_FMWLIB select CRC32 help Say Y or M here to include TAS2781 SPI HD-audio side codec support diff --git a/sound/pci/hda/Makefile b/sound/pci/hda/Makefile index 210c406dfbc5..72ef3a64d9db 100644 --- a/sound/pci/hda/Makefile +++ b/sound/pci/hda/Makefile @@ -40,7 +40,7 @@ snd-hda-scodec-cs35l56-spi-y := cs35l56_hda_spi.o snd-hda-cs-dsp-ctls-y := hda_cs_dsp_ctl.o snd-hda-scodec-component-y := hda_component.o snd-hda-scodec-tas2781-i2c-y := tas2781_hda_i2c.o -snd-hda-scodec-tas2781-spi-y := tas2781_hda_spi.o tas2781_spi_fwlib.o +snd-hda-scodec-tas2781-spi-y := tas2781_hda_spi.o # common driver obj-$(CONFIG_SND_HDA) := snd-hda-codec.o diff --git a/sound/pci/hda/tas2781-spi.h b/sound/pci/hda/tas2781-spi.h deleted file mode 100644 index 7a0faceeb675..000000000000 --- a/sound/pci/hda/tas2781-spi.h +++ /dev/null @@ -1,157 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -// -// ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier -// -// Copyright (C) 2024 Texas Instruments Incorporated -// https://www.ti.com -// -// The TAS2781 driver implements a flexible and configurable -// algo coefficient setting for TAS2781 chips. -// -// Author: Baojun Xu <baojun.xu(a)ti.com> -// - -#ifndef __TAS2781_SPI_H__ -#define __TAS2781_SPI_H__ - -#define TASDEVICE_RATES \ - (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | \ - SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_88200) - -#define TASDEVICE_FORMATS \ - (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE | \ - SNDRV_PCM_FMTBIT_S32_LE) - -#define TASDEVICE_MAX_BOOK_NUM 256 -#define TASDEVICE_MAX_PAGE 256 - -#define TASDEVICE_MAX_SIZE (TASDEVICE_MAX_BOOK_NUM * TASDEVICE_MAX_PAGE) - -/* PAGE Control Register (available in page0 of each book) */ -#define TASDEVICE_PAGE_SELECT 0x00 -#define TASDEVICE_BOOKCTL_PAGE 0x00 -#define TASDEVICE_BOOKCTL_REG GENMASK(7, 1) -#define TASDEVICE_BOOK_ID(reg) (((reg) & GENMASK(24, 16)) >> 16) -#define TASDEVICE_PAGE_ID(reg) (((reg) & GENMASK(15, 8)) >> 8) -#define TASDEVICE_REG_ID(reg) (((reg) & GENMASK(7, 1)) >> 1) -#define TASDEVICE_PAGE_REG(reg) ((reg) & GENMASK(15, 1)) -#define TASDEVICE_REG(book, page, reg) \ - (((book) << 16) | ((page) << 8) | ((reg) << 1)) - -/* Software Reset */ -#define TAS2781_REG_SWRESET TASDEVICE_REG(0x0, 0x0, 0x01) -#define TAS2781_REG_SWRESET_RESET BIT(0) - -/* System Reset Check Register */ -#define TAS2781_REG_CLK_CONFIG TASDEVICE_REG(0x0, 0x0, 0x5c) -#define TAS2781_REG_CLK_CONFIG_RESET (0x19) -#define TAS2781_PRE_POST_RESET_CFG 3 - -/* Block Checksum */ -#define TASDEVICE_CHECKSUM TASDEVICE_REG(0x0, 0x0, 0x7e) - -/* Volume control */ -#define TAS2781_DVC_LVL TASDEVICE_REG(0x0, 0x0, 0x1a) -#define TAS2781_AMP_LEVEL TASDEVICE_REG(0x0, 0x0, 0x03) -#define TAS2781_AMP_LEVEL_MASK GENMASK(5, 1) - -#define TASDEVICE_CMD_SING_W 0x1 -#define TASDEVICE_CMD_BURST 0x2 -#define TASDEVICE_CMD_DELAY 0x3 -#define TASDEVICE_CMD_FIELD_W 0x4 - -#define TAS2781_SPI_MAX_FREQ (4 * HZ_PER_MHZ) - -#define TASDEVICE_CRC8_POLYNOMIAL 0x4d -#define TASDEVICE_SPEAKER_CALIBRATION_SIZE 20 - -/* Flag of calibration registers address. */ -#define TASDEVICE_CALIBRATION_REG_ADDRESS BIT(7) - -#define TASDEVICE_CALIBRATION_DATA_NAME L"CALI_DATA" -#define TASDEVICE_CALIBRATION_DATA_SIZE 256 - -enum calib_data { - R0_VAL = 0, - INV_R0, - R0LOW, - POWER, - TLIM, - CALIB_MAX -}; - -struct tasdevice_priv { - struct tasdevice_fw *cali_data_fmw; - struct tasdevice_rca rcabin; - struct tasdevice_fw *fmw; - struct gpio_desc *reset; - struct mutex codec_lock; - struct regmap *regmap; - struct device *dev; - - unsigned char crc8_lkp_tbl[CRC8_TABLE_SIZE]; - unsigned char coef_binaryname[64]; - unsigned char rca_binaryname[64]; - unsigned char dev_name[32]; - - bool force_fwload_status; - bool playback_started; - bool is_loading; - bool is_loaderr; - unsigned int cali_reg_array[CALIB_MAX]; - unsigned int cali_data[CALIB_MAX]; - unsigned int err_code; - void *codec; - int cur_book; - int cur_prog; - int cur_conf; - int fw_state; - int index; - int irq; - - int (*fw_parse_variable_header)(struct tasdevice_priv *tas_priv, - const struct firmware *fmw, - int offset); - int (*fw_parse_program_data)(struct tasdevice_priv *tas_priv, - struct tasdevice_fw *tas_fmw, - const struct firmware *fmw, int offset); - int (*fw_parse_configuration_data)(struct tasdevice_priv *tas_priv, - struct tasdevice_fw *tas_fmw, - const struct firmware *fmw, - int offset); - int (*tasdevice_load_block)(struct tasdevice_priv *tas_priv, - struct tasdev_blk *block); - - int (*save_calibration)(struct tasdevice_priv *tas_priv); - void (*apply_calibration)(struct tasdevice_priv *tas_priv); -}; - -int tasdevice_spi_dev_read(struct tasdevice_priv *tas_priv, - unsigned int reg, unsigned int *value); -int tasdevice_spi_dev_write(struct tasdevice_priv *tas_priv, - unsigned int reg, unsigned int value); -int tasdevice_spi_dev_bulk_write(struct tasdevice_priv *tas_priv, - unsigned int reg, unsigned char *p_data, - unsigned int n_length); -int tasdevice_spi_dev_bulk_read(struct tasdevice_priv *tas_priv, - unsigned int reg, unsigned char *p_data, - unsigned int n_length); -int tasdevice_spi_dev_update_bits(struct tasdevice_priv *tasdevice, - unsigned int reg, unsigned int mask, - unsigned int value); - -void tasdevice_spi_select_cfg_blk(void *context, int conf_no, - unsigned char block_type); -void tasdevice_spi_config_info_remove(void *context); -int tasdevice_spi_dsp_parser(void *context); -int tasdevice_spi_rca_parser(void *context, const struct firmware *fmw); -void tasdevice_spi_dsp_remove(void *context); -void tasdevice_spi_calbin_remove(void *context); -int tasdevice_spi_select_tuningprm_cfg(void *context, int prm, int cfg_no, - int rca_conf_no); -int tasdevice_spi_prmg_load(void *context, int prm_no); -int tasdevice_spi_prmg_calibdata_load(void *context, int prm_no); -void tasdevice_spi_tuning_switch(void *context, int state); -int tas2781_spi_load_calibration(void *context, char *file_name, - unsigned short i); -#endif /* __TAS2781_SPI_H__ */ diff --git a/sound/pci/hda/tas2781_hda.h b/sound/pci/hda/tas2781_hda.h index 32d27b202591..444231f87e53 100644 --- a/sound/pci/hda/tas2781_hda.h +++ b/sound/pci/hda/tas2781_hda.h @@ -9,6 +9,9 @@ #include <sound/asound.h> +#define TASDEVICE_CALIBRATION_DATA_NAME L"CALI_DATA" +#define TASDEV_CALIB_N 5 + /* * No standard control callbacks for SNDRV_CTL_ELEM_IFACE_CARD * Define two controls, one is Volume control callbacks, the other is diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c index 9d94ae5fcfe0..1be86d1b4a53 100644 --- a/sound/pci/hda/tas2781_hda_i2c.c +++ b/sound/pci/hda/tas2781_hda_i2c.c @@ -34,15 +34,6 @@ #define TASDEVICE_SPEAKER_CALIBRATION_SIZE 20 -enum calib_data { - R0_VAL = 0, - INV_R0, - R0LOW, - POWER, - TLIM, - CALIB_MAX -}; - #define TAS2563_MAX_CHANNELS 4 #define TAS2563_CAL_POWER TASDEVICE_REG(0, 0x0d, 0x3c) @@ -50,17 +41,15 @@ enum calib_data { #define TAS2563_CAL_INVR0 TASDEVICE_REG(0, 0x0f, 0x40) #define TAS2563_CAL_R0_LOW TASDEVICE_REG(0, 0x0f, 0x48) #define TAS2563_CAL_TLIM TASDEVICE_REG(0, 0x10, 0x14) -#define TAS2563_CAL_N 5 #define TAS2563_CAL_DATA_SIZE 4 #define TAS2563_CAL_CH_SIZE 20 #define TAS2563_CAL_ARRAY_SIZE 80 -static unsigned int cal_regs[TAS2563_CAL_N] = { +static unsigned int cal_regs[TASDEV_CALIB_N] = { TAS2563_CAL_POWER, TAS2563_CAL_R0, TAS2563_CAL_INVR0, TAS2563_CAL_R0_LOW, TAS2563_CAL_TLIM, }; - struct tas2781_hda { struct device *dev; struct tasdevice_priv *priv; @@ -475,7 +464,7 @@ static void tas2563_apply_calib(struct tasdevice_priv *tas_priv) int ret; for (int i = 0; i < tas_priv->ndev; i++) { - for (int j = 0; j < TAS2563_CAL_N; ++j) { + for (int j = 0; j < TASDEV_CALIB_N; ++j) { data = cpu_to_be32( *(uint32_t *)&tas_priv->cali_data.data[offset]); ret = tasdevice_dev_bulk_write(tas_priv, i, cal_regs[j], @@ -493,7 +482,7 @@ static int tas2563_save_calibration(struct tasdevice_priv *tas_priv) static efi_guid_t efi_guid = EFI_GUID(0x1f52d2a1, 0xbb3a, 0x457d, 0xbc, 0x09, 0x43, 0xa3, 0xf4, 0x31, 0x0a, 0x92); - static efi_char16_t *efi_vars[TAS2563_MAX_CHANNELS][TAS2563_CAL_N] = { + static efi_char16_t *efi_vars[TAS2563_MAX_CHANNELS][TASDEV_CALIB_N] = { { L"Power_1", L"R0_1", L"InvR0_1", L"R0_Low_1", L"TLim_1" }, { L"Power_2", L"R0_2", L"InvR0_2", L"R0_Low_2", L"TLim_2" }, { L"Power_3", L"R0_3", L"InvR0_3", L"R0_Low_3", L"TLim_3" }, @@ -511,7 +500,7 @@ static int tas2563_save_calibration(struct tasdevice_priv *tas_priv) return -ENOMEM; for (int i = 0; i < tas_priv->ndev; ++i) { - for (int j = 0; j < TAS2563_CAL_N; ++j) { + for (int j = 0; j < TASDEV_CALIB_N; ++j) { status = efi.get_variable(efi_vars[i][j], &efi_guid, &attr, &max_size, &tas_priv->cali_data.data[offset]); @@ -535,7 +524,7 @@ static void tas2781_apply_calib(struct tasdevice_priv *tas_priv) { struct calidata *cali_data = &tas_priv->cali_data; struct cali_reg *r = &cali_data->cali_reg_array; - unsigned int cali_reg[CALIB_MAX] = { + unsigned int cali_reg[TASDEV_CALIB_N] = { TASDEVICE_REG(0, 0x17, 0x74), TASDEVICE_REG(0, 0x18, 0x0c), TASDEVICE_REG(0, 0x18, 0x14), @@ -555,7 +544,7 @@ static void tas2781_apply_calib(struct tasdevice_priv *tas_priv) } for (i = 0; i < tas_priv->ndev; i++) { - for (j = 0; j < CALIB_MAX; j++) { + for (j = 0; j < TASDEV_CALIB_N; j++) { data = cpu_to_be32( *(uint32_t *)&tas_priv->cali_data.data[oft]); rc = tasdevice_dev_bulk_write(tas_priv, i, @@ -578,7 +567,7 @@ static int tas2781_save_calibration(struct tasdevice_priv *tas_priv) { efi_guid_t efi_guid = EFI_GUID(0x02f9af02, 0x7734, 0x4233, 0xb4, 0x3d, 0x93, 0xfe, 0x5a, 0xa3, 0x5d, 0xb3); - static efi_char16_t efi_name[] = L"CALI_DATA"; + static efi_char16_t efi_name[] = TASDEVICE_CALIBRATION_DATA_NAME; unsigned int attr, crc; unsigned int *tmp_val; efi_status_t status; diff --git a/sound/pci/hda/tas2781_hda_spi.c b/sound/pci/hda/tas2781_hda_spi.c index 92be591c6bfe..977569ee4652 100644 --- a/sound/pci/hda/tas2781_hda_spi.c +++ b/sound/pci/hda/tas2781_hda_spi.c @@ -27,12 +27,10 @@ #include <sound/hda_codec.h> #include <sound/soc.h> -#include <sound/tas2781-dsp.h> +#include <sound/tas2781.h> #include <sound/tlv.h> #include <sound/tas2781-tlv.h> -#include "tas2781-spi.h" - #include "hda_local.h" #include "hda_auto_parser.h" #include "hda_component.h" @@ -40,6 +38,17 @@ #include "hda_generic.h" #include "tas2781_hda.h" +#define TASDEVICE_RANGE_MAX_SIZE (256 * 128) +#define TASDEVICE_WIN_LEN 128 +#define TAS2781_SPI_MAX_FREQ (4 * HZ_PER_MHZ) +/* Flag of calibration registers address. */ +#define TASDEVICE_CALIBRATION_REG_ADDRESS BIT(7) +#define TASDEV_UEFI_CALI_REG_ADDR_FLG BIT(7) + +/* System Reset Check Register */ +#define TAS2781_REG_CLK_CONFIG TASDEVICE_REG(0x0, 0x0, 0x5c) +#define TAS2781_REG_CLK_CONFIG_RESET 0x19 + struct tas2781_hda { struct tasdevice_priv *priv; struct acpi_device *dacpi; @@ -52,12 +61,12 @@ struct tas2781_hda { static const struct regmap_range_cfg tasdevice_ranges[] = { { .range_min = 0, - .range_max = TASDEVICE_MAX_SIZE, + .range_max = TASDEVICE_RANGE_MAX_SIZE, .selector_reg = TASDEVICE_PAGE_SELECT, .selector_mask = GENMASK(7, 0), .selector_shift = 0, .window_start = 0, - .window_len = TASDEVICE_MAX_PAGE, + .window_len = TASDEVICE_WIN_LEN, }, }; @@ -65,39 +74,19 @@ static const struct regmap_config tasdevice_regmap = { .reg_bits = 8, .val_bits = 8, .zero_flag_mask = true, + .read_flag_mask = 0x01, + .reg_shift = -1, .cache_type = REGCACHE_NONE, .ranges = tasdevice_ranges, .num_ranges = ARRAY_SIZE(tasdevice_ranges), - .max_register = TASDEVICE_MAX_SIZE, + .max_register = TASDEVICE_RANGE_MAX_SIZE, }; -static int tasdevice_spi_switch_book(struct tasdevice_priv *tas_priv, int reg) +static int tasdevice_spi_dev_read(struct tasdevice_priv *tas_priv, + unsigned short chn, unsigned int reg, unsigned int *val) { - struct regmap *map = tas_priv->regmap; - - if (tas_priv->cur_book != TASDEVICE_BOOK_ID(reg)) { - int ret = regmap_write(map, TASDEVICE_BOOKCTL_REG, - TASDEVICE_BOOK_ID(reg)); - if (ret < 0) { - dev_err(tas_priv->dev, "Switch Book E=%d\n", ret); - return ret; - } - tas_priv->cur_book = TASDEVICE_BOOK_ID(reg); - } - return 0; -} - -int tasdevice_spi_dev_read(struct tasdevice_priv *tas_priv, - unsigned int reg, - unsigned int *val) -{ - struct regmap *map = tas_priv->regmap; int ret; - ret = tasdevice_spi_switch_book(tas_priv, reg); - if (ret < 0) - return ret; - /* * In our TAS2781 SPI mode, if read from other book (not book 0), * or read from page number larger than 1 in book 0, one more byte @@ -106,11 +95,11 @@ int tasdevice_spi_dev_read(struct tasdevice_priv *tas_priv, if ((TASDEVICE_BOOK_ID(reg) > 0) || (TASDEVICE_PAGE_ID(reg) > 1)) { unsigned char data[2]; - ret = regmap_bulk_read(map, TASDEVICE_PAGE_REG(reg) | 1, + ret = tasdevice_dev_bulk_read(tas_priv, chn, reg, data, sizeof(data)); *val = data[1]; } else { - ret = regmap_read(map, TASDEVICE_PAGE_REG(reg) | 1, val); + ret = tasdevice_dev_read(tas_priv, chn, reg, val); } if (ret < 0) dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret); @@ -118,71 +107,25 @@ int tasdevice_spi_dev_read(struct tasdevice_priv *tas_priv, return ret; } -int tasdevice_spi_dev_write(struct tasdevice_priv *tas_priv, - unsigned int reg, - unsigned int value) -{ - struct regmap *map = tas_priv->regmap; - int ret; - - ret = tasdevice_spi_switch_book(tas_priv, reg); - if (ret < 0) - return ret; - - ret = regmap_write(map, TASDEVICE_PAGE_REG(reg), value); - if (ret < 0) - dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret); - - return ret; -} - -int tasdevice_spi_dev_bulk_write(struct tasdevice_priv *tas_priv, - unsigned int reg, - unsigned char *data, - unsigned int len) -{ - struct regmap *map = tas_priv->regmap; - int ret; - - ret = tasdevice_spi_switch_book(tas_priv, reg); - if (ret < 0) - return ret; - - ret = regmap_bulk_write(map, TASDEVICE_PAGE_REG(reg), data, len); - if (ret < 0) - dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret); - - return ret; -} - -int tasdevice_spi_dev_bulk_read(struct tasdevice_priv *tas_priv, - unsigned int reg, - unsigned char *data, - unsigned int len) +static int tasdevice_spi_dev_bulk_read(struct tasdevice_priv *tas_priv, + unsigned short chn, unsigned int reg, unsigned char *data, + unsigned int len) { - struct regmap *map = tas_priv->regmap; int ret; - ret = tasdevice_spi_switch_book(tas_priv, reg); - if (ret < 0) - return ret; - - if (len > TASDEVICE_MAX_PAGE) - len = TASDEVICE_MAX_PAGE; /* * In our TAS2781 SPI mode, if read from other book (not book 0), * or read from page number larger than 1 in book 0, one more byte * read is needed, and first byte is a dummy byte, need to be ignored. */ if ((TASDEVICE_BOOK_ID(reg) > 0) || (TASDEVICE_PAGE_ID(reg) > 1)) { - unsigned char buf[TASDEVICE_MAX_PAGE+1]; + unsigned char buf[TASDEVICE_WIN_LEN + 1]; - ret = regmap_bulk_read(map, TASDEVICE_PAGE_REG(reg) | 1, buf, - len + 1); + ret = tasdevice_dev_bulk_read(tas_priv, chn, reg, + buf, len + 1); memcpy(data, buf + 1, len); } else { - ret = regmap_bulk_read(map, TASDEVICE_PAGE_REG(reg) | 1, data, - len); + ret = tasdevice_dev_bulk_read(tas_priv, chn, reg, data, len); } if (ret < 0) dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret); @@ -190,31 +133,55 @@ int tasdevice_spi_dev_bulk_read(struct tasdevice_priv *tas_priv, return ret; } -int tasdevice_spi_dev_update_bits(struct tasdevice_priv *tas_priv, - unsigned int reg, - unsigned int mask, - unsigned int value) +static int tasdevice_spi_dev_update_bits(struct tasdevice_priv *tas_priv, + unsigned short chn, unsigned int reg, unsigned int mask, + unsigned int value) { - struct regmap *map = tas_priv->regmap; int ret, val; /* * In our TAS2781 SPI mode, read/write was masked in last bit of * address, it cause regmap_update_bits() not work as expected. */ - ret = tasdevice_spi_dev_read(tas_priv, reg, &val); + ret = tasdevice_dev_read(tas_priv, chn, reg, &val); if (ret < 0) { dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret); return ret; } - ret = regmap_write(map, TASDEVICE_PAGE_REG(reg), - (val & ~mask) | (mask & value)); + + ret = tasdevice_dev_write(tas_priv, chn, TASDEVICE_PAGE_REG(reg), + (val & ~mask) | (mask & value)); if (ret < 0) dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret); return ret; } +static int tasdevice_spi_change_chn_book(struct tasdevice_priv *p, + unsigned short chn, int book) +{ + int ret = 0; + + if (chn == p->index) { + struct tasdevice *tasdev = &p->tasdevice[chn]; + struct regmap *map = p->regmap; + + if (tasdev->cur_book != book) { + ret = regmap_write(map, TASDEVICE_BOOKCTL_REG, book); + if (ret < 0) + dev_err(p->dev, "%s, E=%d\n", __func__, ret); + else + tasdev->cur_book = book; + } + } else { + ret = -EXDEV; + dev_dbg(p->dev, "Not error, %s ignore channel(%d)\n", + __func__, chn); + } + + return ret; +} + static void tas2781_spi_reset(struct tasdevice_priv *tas_dev) { int ret; @@ -223,12 +190,13 @@ static void tas2781_spi_reset(struct tasdevice_priv *tas_dev) gpiod_set_value_cansleep(tas_dev->reset, 0); fsleep(800); gpiod_set_value_cansleep(tas_dev->reset, 1); + } else { + ret = tasdevice_dev_write(tas_dev, tas_dev->index, + TASDEVICE_REG_SWRESET, TASDEVICE_REG_SWRESET_RESET); + if (ret < 0) + dev_err(tas_dev->dev, "dev sw-reset fail, %d\n", ret); + fsleep(1000); } - ret = tasdevice_spi_dev_write(tas_dev, TAS2781_REG_SWRESET, - TAS2781_REG_SWRESET_RESET); - if (ret < 0) - dev_err(tas_dev->dev, "dev sw-reset fail, %d\n", ret); - fsleep(1000); } static int tascodec_spi_init(struct tasdevice_priv *tas_priv, @@ -245,7 +213,7 @@ static int tascodec_spi_init(struct tasdevice_priv *tas_priv, scnprintf(tas_priv->rca_binaryname, sizeof(tas_priv->rca_binaryname), "%sRCA%d.bin", - tas_priv->dev_name, tas_priv->index); + tas_priv->dev_name, tas_priv->ndev); crc8_populate_msb(tas_priv->crc8_lkp_tbl, TASDEVICE_CRC8_POLYNOMIAL); tas_priv->codec = codec; ret = request_firmware_nowait(module, FW_ACTION_UEVENT, @@ -260,26 +228,22 @@ static int tascodec_spi_init(struct tasdevice_priv *tas_priv, static void tasdevice_spi_init(struct tasdevice_priv *tas_priv) { - tas_priv->cur_prog = -1; - tas_priv->cur_conf = -1; + tas_priv->tasdevice[tas_priv->index].cur_book = -1; + tas_priv->tasdevice[tas_priv->index].cur_conf = -1; + tas_priv->tasdevice[tas_priv->index].cur_prog = -1; - tas_priv->cur_book = -1; - tas_priv->cur_prog = -1; - tas_priv->cur_conf = -1; + tas_priv->isspi = true; - /* Store default registers address for calibration data. */ - tas_priv->cali_reg_array[0] = TASDEVICE_REG(0, 0x17, 0x74); - tas_priv->cali_reg_array[1] = TASDEVICE_REG(0, 0x18, 0x0c); - tas_priv->cali_reg_array[2] = TASDEVICE_REG(0, 0x18, 0x14); - tas_priv->cali_reg_array[3] = TASDEVICE_REG(0, 0x13, 0x70); - tas_priv->cali_reg_array[4] = TASDEVICE_REG(0, 0x18, 0x7c); + tas_priv->update_bits = tasdevice_spi_dev_update_bits; + tas_priv->change_chn_book = tasdevice_spi_change_chn_book; + tas_priv->dev_read = tasdevice_spi_dev_read; + tas_priv->dev_bulk_read = tasdevice_spi_dev_bulk_read; mutex_init(&tas_priv->codec_lock); } static int tasdevice_spi_amp_putvol(struct tasdevice_priv *tas_priv, - struct snd_ctl_elem_value *ucontrol, - struct soc_mixer_control *mc) + struct snd_ctl_elem_value *ucontrol, struct soc_mixer_control *mc) { unsigned int invert = mc->invert; unsigned char mask; @@ -290,7 +254,8 @@ static int tasdevice_spi_amp_putvol(struct tasdevice_priv *tas_priv, mask <<= mc->shift; val = clamp(invert ? max - ucontrol->value.integer.value[0] : ucontrol->value.integer.value[0], 0, max); - ret = tasdevice_spi_dev_update_bits(tas_priv, + + ret = tasdevice_spi_dev_update_bits(tas_priv, tas_priv->index, mc->reg, mask, (unsigned int)(val << mc->shift)); if (ret) dev_err(tas_priv->dev, "set AMP vol error in dev %d\n", @@ -300,16 +265,14 @@ static int tasdevice_spi_amp_putvol(struct tasdevice_priv *tas_priv, } static int tasdevice_spi_amp_getvol(struct tasdevice_priv *tas_priv, - struct snd_ctl_elem_value *ucontrol, - struct soc_mixer_control *mc) + struct snd_ctl_elem_value *ucontrol, struct soc_mixer_control *mc) { unsigned int invert = mc->invert; unsigned char mask = 0; int max = mc->max; int ret, val; - /* Read the primary device */ - ret = tasdevice_spi_dev_read(tas_priv, mc->reg, &val); + ret = tasdevice_spi_dev_read(tas_priv, tas_priv->index, mc->reg, &val); if (ret) { dev_err(tas_priv->dev, "%s, get AMP vol error\n", __func__); return ret; @@ -324,9 +287,8 @@ static int tasdevice_spi_amp_getvol(struct tasdevice_priv *tas_priv, return ret; } -static int tasdevice_spi_digital_putvol(struct tasdevice_priv *tas_priv, - struct snd_ctl_elem_value *ucontrol, - struct soc_mixer_control *mc) +static int tasdevice_spi_digital_putvol(struct tasdevice_priv *p, + struct snd_ctl_elem_value *ucontrol, struct soc_mixer_control *mc) { unsigned int invert = mc->invert; int max = mc->max; @@ -334,26 +296,23 @@ static int tasdevice_spi_digital_putvol(struct tasdevice_priv *tas_priv, val = clamp(invert ? max - ucontrol->value.integer.value[0] : ucontrol->value.integer.value[0], 0, max); - ret = tasdevice_spi_dev_write(tas_priv, mc->reg, (unsigned int)val); + ret = tasdevice_dev_write(p, p->index, mc->reg, (unsigned int)val); if (ret) - dev_err(tas_priv->dev, "set digital vol err in dev %d\n", - tas_priv->index); + dev_err(p->dev, "set digital vol err in dev %d\n", p->index); return ret; } -static int tasdevice_spi_digital_getvol(struct tasdevice_priv *tas_priv, - struct snd_ctl_elem_value *ucontrol, - struct soc_mixer_control *mc) +static int tasdevice_spi_digital_getvol(struct tasdevice_priv *p, + struct snd_ctl_elem_value *ucontrol, struct soc_mixer_control *mc) { unsigned int invert = mc->invert; int max = mc->max; int ret, val; - /* Read the primary device as the whole */ - ret = tasdevice_spi_dev_read(tas_priv, mc->reg, &val); + ret = tasdevice_spi_dev_read(p, p->index, mc->reg, &val); if (ret) { - dev_err(tas_priv->dev, "%s, get digital vol err\n", __func__); + dev_err(p->dev, "%s, get digital vol err\n", __func__); return ret; } @@ -392,7 +351,7 @@ static int tas2781_read_acpi(struct tas2781_hda *tas_hda, ret = -EINVAL; goto err; } - nval = ret; + p->ndev = nval = ret; ret = device_property_read_u32_array(physdev, property, values, nval); if (ret) @@ -435,14 +394,17 @@ static int tas2781_read_acpi(struct tas2781_hda *tas_hda, static void tas2781_hda_playback_hook(struct device *dev, int action) { struct tas2781_hda *tas_hda = dev_get_drvdata(dev); + struct tasdevice_priv *tas_priv = tas_hda->priv; if (action == HDA_GEN_PCM_ACT_OPEN) { pm_runtime_get_sync(dev); - guard(mutex)(&tas_hda->priv->codec_lock); - tasdevice_spi_tuning_switch(tas_hda->priv, 0); + guard(mutex)(&tas_priv->codec_lock); + if (tas_priv->fw_state == TASDEVICE_DSP_FW_ALL_OK) + tasdevice_tuning_switch(tas_hda->priv, 0); } else if (action == HDA_GEN_PCM_ACT_CLOSE) { - guard(mutex)(&tas_hda->priv->codec_lock); - tasdevice_spi_tuning_switch(tas_hda->priv, 1); + guard(mutex)(&tas_priv->codec_lock); + if (tas_priv->fw_state == TASDEVICE_DSP_FW_ALL_OK) + tasdevice_tuning_switch(tas_priv, 1); pm_runtime_mark_last_busy(dev); pm_runtime_put_autosuspend(dev); } @@ -589,6 +551,7 @@ static int tas2781_digital_getvol(struct snd_kcontrol *kcontrol, struct soc_mixer_control *mc = (struct soc_mixer_control *)kcontrol->private_value; + guard(mutex)(&tas_priv->codec_lock); return tasdevice_spi_digital_getvol(tas_priv, ucontrol, mc); } @@ -599,6 +562,7 @@ static int tas2781_amp_getvol(struct snd_kcontrol *kcontrol, struct soc_mixer_control *mc = (struct soc_mixer_control *)kcontrol->private_value; + guard(mutex)(&tas_priv->codec_lock); return tasdevice_spi_amp_getvol(tas_priv, ucontrol, mc); } @@ -610,6 +574,7 @@ static int tas2781_digital_putvol(struct snd_kcontrol *kcontrol, (struct soc_mixer_control *)kcontrol->private_value; /* The check of the given value is in tasdevice_digital_putvol. */ + guard(mutex)(&tas_priv->codec_lock); return tasdevice_spi_digital_putvol(tas_priv, ucontrol, mc); } @@ -621,6 +586,7 @@ static int tas2781_amp_putvol(struct snd_kcontrol *kcontrol, (struct soc_mixer_control *)kcontrol->private_value; /* The check of the given value is in tasdevice_amp_putvol. */ + guard(mutex)(&tas_priv->codec_lock); return tasdevice_spi_amp_putvol(tas_priv, ucontrol, mc); } @@ -725,137 +691,164 @@ static const struct snd_kcontrol_new tas2781_dsp_conf_ctrl[] = { static void tas2781_apply_calib(struct tasdevice_priv *tas_priv) { - int i, rc; - - /* - * If no calibration data exist in tasdevice_priv *tas_priv, - * calibration apply will be ignored, and use default values - * in firmware binary, which was loaded during firmware download. - */ - if (tas_priv->cali_data[0] == 0) - return; - /* - * Calibration data was saved in tasdevice_priv *tas_priv as: - * unsigned int cali_data[CALIB_MAX]; - * and every data (in 4 bytes) will be saved in register which in - * book 0, and page number in page_array[], offset was saved in - * rgno_array[]. - */ - for (i = 0; i < CALIB_MAX; i++) { - rc = tasdevice_spi_dev_bulk_write(tas_priv, - tas_priv->cali_reg_array[i], - (unsigned char *)&tas_priv->cali_data[i], 4); - if (rc < 0) - dev_err(tas_priv->dev, - "chn %d calib %d bulk_wr err = %d\n", - tas_priv->index, i, rc); - } -} - -/* - * Update the calibration data, including speaker impedance, f0, etc, - * into algo. Calibrate data is done by manufacturer in the factory. - * These data are used by Algo for calculating the speaker temperature, - * speaker membrane excursion and f0 in real time during playback. - * Calibration data format in EFI is V2, since 2024. - */ -static int tas2781_save_calibration(struct tasdevice_priv *tas_priv) -{ - /* - * GUID was used for data access in BIOS, it was provided by board - * manufactory, like HP: "{02f9af02-7734-4233-b43d-93fe5aa35db3}" - */ - efi_guid_t efi_guid = - EFI_GUID(0x02f9af02, 0x7734, 0x4233, - 0xb4, 0x3d, 0x93, 0xfe, 0x5a, 0xa3, 0x5d, 0xb3); - static efi_char16_t efi_name[] = TASDEVICE_CALIBRATION_DATA_NAME; - unsigned char data[TASDEVICE_CALIBRATION_DATA_SIZE], *buf; - unsigned int attr, crc, offset, *tmp_val; - unsigned long total_sz = 0; - efi_status_t status; + struct calidata *cali_data = &tas_priv->cali_data; + struct cali_reg *r = &cali_data->cali_reg_array; + unsigned char *data = cali_data->data; + unsigned int *tmp_val = (unsigned int *)data; + unsigned int cali_reg[TASDEV_CALIB_N] = { + TASDEVICE_REG(0, 0x17, 0x74), + TASDEVICE_REG(0, 0x18, 0x0c), + TASDEVICE_REG(0, 0x18, 0x14), + TASDEVICE_REG(0, 0x13, 0x70), + TASDEVICE_REG(0, 0x18, 0x7c), + }; + unsigned int crc, oft; + unsigned char *buf; + int i, j, k, l; - tas_priv->cali_data[0] = 0; - status = efi.get_variable(efi_name, &efi_guid, &attr, &total_sz, data); - if (status == EFI_BUFFER_TOO_SMALL) { - if (total_sz > TASDEVICE_CALIBRATION_DATA_SIZE) - return -ENOMEM; - /* Get variable contents into buffer */ - status = efi.get_variable(efi_name, &efi_guid, &attr, - &total_sz, data); - } - if (status != EFI_SUCCESS) - return status; - - tmp_val = (unsigned int *)data; if (tmp_val[0] == 2781) { /* * New features were added in calibrated Data V3: * 1. Added calibration registers address define in - * a node, marked as Device id == 0x80. + * a node, marked as Device id == 0x80. * New features were added in calibrated Data V2: * 1. Added some the fields to store the link_id and - * uniqie_id for multi-link solutions + * uniqie_id for multi-link solutions * 2. Support flexible number of devices instead of - * fixed one in V1. + * fixed one in V1. * Layout of calibrated data V2 in UEFI(total 256 bytes): * ChipID (2781, 4 bytes) - * Device-Sum (4 bytes) + * Data-Group-Sum (4 bytes) * TimeStamp of Calibration (4 bytes) - * for (i = 0; i < Device-Sum; i++) { - * Device #i index_info () { - * SDW link id (2bytes) - * SDW unique_id (2bytes) - * } // if Device number is 0x80, mean it's - * calibration registers address. - * Calibrated Data of Device #i (20 bytes) + * for (i = 0; i < Data-Group-Sum; i++) { + * if (Data type != 0x80) (4 bytes) + * Calibrated Data of Device #i (20 bytes) + * else + * Calibration registers address (5*4 = 20 bytes) + * # V2: No reg addr in data grp section. + * # V3: Normally the last grp is the reg addr. * } * CRC (4 bytes) * Reserved (the rest) */ crc = crc32(~0, data, (3 + tmp_val[1] * 6) * 4) ^ ~0; - if (crc != tmp_val[3 + tmp_val[1] * 6]) - return 0; - - for (int j = 0; j < tmp_val[1]; j++) { - offset = j * 6 + 3; - if (tmp_val[offset] == tas_priv->index) { - for (int i = 0; i < CALIB_MAX; i++) - tas_priv->cali_data[i] = - tmp_val[offset + i + 1]; - } else if (tmp_val[offset] == - TASDEVICE_CALIBRATION_REG_ADDRESS) { - for (int i = 0; i < CALIB_MAX; i++) { - buf = &data[(offset + i + 1) * 4]; - tas_priv->cali_reg_array[i] = - TASDEVICE_REG(buf[1], buf[2], - buf[3]); + if (crc != tmp_val[3 + tmp_val[1] * 6]) { + cali_data->total_sz = 0; + dev_err(tas_priv->dev, "%s: CRC error\n", __func__); + return; + } + + for (j = 0, k = 0; j < tmp_val[1]; j++) { + oft = j * 6 + 3; + if (tmp_val[oft] == TASDEV_UEFI_CALI_REG_ADDR_FLG) { + for (i = 0; i < TASDEV_CALIB_N; i++) { + buf = &data[(oft + i + 1) * 4]; + cali_reg[i] = TASDEVICE_REG(buf[1], + buf[2], buf[3]); + } + } else { + l = j * (cali_data->cali_dat_sz_per_dev + 1); + if (k >= tas_priv->ndev || l > oft * 4) { + dev_err(tas_priv->dev, + "%s: dev sum error\n", + __func__); + cali_data->total_sz = 0; + return; } + + data[l] = k; + for (i = 0; i < TASDEV_CALIB_N * 4; i++) + data[l + i] = data[4 * oft + i]; + k++; } - tas_priv->apply_calibration(tas_priv); } } else { /* * Calibration data is in V1 format. * struct cali_data { - * char cali_data[20]; + * char cali_data[20]; * } * * struct { - * struct cali_data cali_data[4]; - * int TimeStamp of Calibration (4 bytes) - * int CRC (4 bytes) + * struct cali_data cali_data[4]; + * int TimeStamp of Calibration (4 bytes) + * int CRC (4 bytes) * } ueft; */ crc = crc32(~0, data, 84) ^ ~0; - if (crc == tmp_val[21]) { - for (int i = 0; i < CALIB_MAX; i++) - tas_priv->cali_data[i] = - tmp_val[tas_priv->index * 5 + i]; - tas_priv->apply_calibration(tas_priv); + if (crc != tmp_val[21]) { + cali_data->total_sz = 0; + dev_err(tas_priv->dev, "%s: V1 CRC error\n", __func__); + return; + } + + for (j = tas_priv->ndev - 1; j >= 0; j--) { + l = j * (cali_data->cali_dat_sz_per_dev + 1); + for (i = TASDEV_CALIB_N * 4; i > 0 ; i--) + data[l + i] = data[tas_priv->index * 5 + i]; + data[l+i] = j; + } + } + + if (tas_priv->dspbin_typ == TASDEV_BASIC) { + r->r0_reg = cali_reg[0]; + r->invr0_reg = cali_reg[1]; + r->r0_low_reg = cali_reg[2]; + r->pow_reg = cali_reg[3]; + r->tlimit_reg = cali_reg[4]; + } + + tas_priv->is_user_space_calidata = true; + cali_data->total_sz = + tas_priv->ndev * (cali_data->cali_dat_sz_per_dev + 1); +} + +/* + * Update the calibration data, including speaker impedance, f0, etc, + * into algo. Calibrate data is done by manufacturer in the factory. + * These data are used by Algo for calculating the speaker temperature, + * speaker membrane excursion and f0 in real time during playback. + * Calibration data format in EFI is V2, since 2024. + */ +static int tas2781_save_calibration(struct tasdevice_priv *tas_priv) +{ + /* + * GUID was used for data access in BIOS, it was provided by board + * manufactory, like HP: "{02f9af02-7734-4233-b43d-93fe5aa35db3}" + */ + efi_guid_t efi_guid = + EFI_GUID(0x02f9af02, 0x7734, 0x4233, + 0xb4, 0x3d, 0x93, 0xfe, 0x5a, 0xa3, 0x5d, 0xb3); + static efi_char16_t efi_name[] = TASDEVICE_CALIBRATION_DATA_NAME; + struct calidata *cali_data = &tas_priv->cali_data; + unsigned long total_sz = 0; + unsigned int attr, size; + efi_status_t status; + unsigned char *data; + + cali_data->cali_dat_sz_per_dev = 20; + size = tas_priv->ndev * (cali_data->cali_dat_sz_per_dev + 1); + status = efi.get_variable(efi_name, &efi_guid, &attr, &total_sz, NULL); + cali_data->total_sz = total_sz > size ? total_sz : size; + if (status == EFI_BUFFER_TOO_SMALL) { + /* Allocate data buffer of data_size bytes */ + data = tas_priv->cali_data.data = devm_kzalloc(tas_priv->dev, + tas_priv->cali_data.total_sz, GFP_KERNEL); + if (!data) { + tas_priv->cali_data.total_sz = 0; + return -ENOMEM; } + /* Get variable contents into buffer */ + status = efi.get_variable(efi_name, &efi_guid, &attr, + &tas_priv->cali_data.total_sz, data); + } + if (status != EFI_SUCCESS) { + tas_priv->cali_data.total_sz = 0; + return status; } + tas_priv->apply_calibration(tas_priv); return 0; } @@ -883,7 +876,7 @@ static void tasdev_fw_ready(const struct firmware *fmw, void *context) pm_runtime_get_sync(tas_priv->dev); guard(mutex)(&tas_priv->codec_lock); - ret = tasdevice_spi_rca_parser(tas_priv, fmw); + ret = tasdevice_rca_parser(tas_priv, fmw); if (ret) goto out; @@ -910,12 +903,12 @@ static void tasdev_fw_ready(const struct firmware *fmw, void *context) } } - tasdevice_spi_dsp_remove(tas_priv); + tasdevice_dsp_remove(tas_priv); tas_priv->fw_state = TASDEVICE_DSP_FW_PENDING; scnprintf(tas_priv->coef_binaryname, 64, "TAS2XXX%08X-%01d.bin", codec->core.subsystem_id, tas_priv->index); - ret = tasdevice_spi_dsp_parser(tas_priv); + ret = tasdevice_dsp_parser(tas_priv); if (ret) { dev_err(tas_priv->dev, "dspfw load %s error\n", tas_priv->coef_binaryname); @@ -945,26 +938,27 @@ static void tasdev_fw_ready(const struct firmware *fmw, void *context) goto out; } - /* Perform AMP reset before firmware download. */ - tas_priv->rcabin.profile_cfg_id = TAS2781_PRE_POST_RESET_CFG; tas2781_spi_reset(tas_priv); tas_priv->rcabin.profile_cfg_id = 0; tas_priv->fw_state = TASDEVICE_DSP_FW_ALL_OK; - ret = tasdevice_spi_dev_read(tas_priv, TAS2781_REG_CLK_CONFIG, &val); + ret = tas_priv->dev_read(tas_priv, tas_priv->index, + TAS2781_REG_CLK_CONFIG, &val); if (ret < 0) goto out; - if (val == TAS2781_REG_CLK_CONFIG_RESET) - ret = tasdevice_spi_prmg_load(tas_priv, 0); - if (ret < 0) { - dev_err(tas_priv->dev, "FW download failed = %d\n", ret); - goto out; + if (val == TAS2781_REG_CLK_CONFIG_RESET) { + ret = tasdevice_prmg_load(tas_priv, 0); + if (ret < 0) { + dev_err(tas_priv->dev, "FW download failed = %d\n", + ret); + goto out; + } } if (tas_priv->fmw->nr_programs > 0) - tas_priv->cur_prog = 0; + tas_priv->tasdevice[tas_priv->index].cur_prog = 0; if (tas_priv->fmw->nr_configurations > 0) - tas_priv->cur_conf = 0; + tas_priv->tasdevice[tas_priv->index].cur_conf = 0; /* * If calibrated data occurs error, dsp will still works with default @@ -1017,9 +1011,10 @@ static void tas2781_hda_unbind(struct device *dev, struct device *master, { struct tas2781_hda *tas_hda = dev_get_drvdata(dev); struct hda_component_parent *parent = master_data; + struct tasdevice_priv *tas_priv = tas_hda->priv; struct hda_component *comp; - comp = hda_component_from_index(parent, tas_hda->priv->index); + comp = hda_component_from_index(parent, tas_priv->index); if (comp && (comp->dev == dev)) { comp->dev = NULL; memset(comp->name, 0, sizeof(comp->name)); @@ -1028,8 +1023,8 @@ static void tas2781_hda_unbind(struct device *dev, struct device *master, tas2781_hda_remove_controls(tas_hda); - tasdevice_spi_config_info_remove(tas_hda->priv); - tasdevice_spi_dsp_remove(tas_hda->priv); + tasdevice_config_info_remove(tas_priv); + tasdevice_dsp_remove(tas_priv); tas_hda->priv->fw_state = TASDEVICE_DSP_FW_PENDING; } @@ -1124,14 +1119,16 @@ static void tas2781_hda_spi_remove(struct spi_device *spi) static int tas2781_runtime_suspend(struct device *dev) { struct tas2781_hda *tas_hda = dev_get_drvdata(dev); + struct tasdevice_priv *tas_priv = tas_hda->priv; - guard(mutex)(&tas_hda->priv->codec_lock); + guard(mutex)(&tas_priv->codec_lock); - if (tas_hda->priv->playback_started) - tasdevice_spi_tuning_switch(tas_hda->priv, 1); + if (tas_priv->fw_state == TASDEVICE_DSP_FW_ALL_OK + && tas_priv->playback_started) + tasdevice_tuning_switch(tas_priv, 1); - tas_hda->priv->cur_book = -1; - tas_hda->priv->cur_conf = -1; + tas_priv->tasdevice[tas_priv->index].cur_book = -1; + tas_priv->tasdevice[tas_priv->index].cur_conf = -1; return 0; } @@ -1139,11 +1136,13 @@ static int tas2781_runtime_suspend(struct device *dev) static int tas2781_runtime_resume(struct device *dev) { struct tas2781_hda *tas_hda = dev_get_drvdata(dev); + struct tasdevice_priv *tas_priv = tas_hda->priv; - guard(mutex)(&tas_hda->priv->codec_lock); + guard(mutex)(&tas_priv->codec_lock); - if (tas_hda->priv->playback_started) - tasdevice_spi_tuning_switch(tas_hda->priv, 0); + if (tas_priv->fw_state == TASDEVICE_DSP_FW_ALL_OK + && tas_priv->playback_started) + tasdevice_tuning_switch(tas_priv, 0); return 0; } @@ -1151,6 +1150,7 @@ static int tas2781_runtime_resume(struct device *dev) static int tas2781_system_suspend(struct device *dev) { struct tas2781_hda *tas_hda = dev_get_drvdata(dev); + struct tasdevice_priv *tas_priv = tas_hda->priv; int ret; ret = pm_runtime_force_suspend(dev); @@ -1158,8 +1158,9 @@ static int tas2781_system_suspend(struct device *dev) return ret; /* Shutdown chip before system suspend */ - if (tas_hda->priv->playback_started) - tasdevice_spi_tuning_switch(tas_hda->priv, 1); + if (tas_priv->fw_state == TASDEVICE_DSP_FW_ALL_OK + && tas_priv->playback_started) + tasdevice_tuning_switch(tas_priv, 1); return 0; } @@ -1167,32 +1168,34 @@ static int tas2781_system_suspend(struct device *dev) static int tas2781_system_resume(struct device *dev) { struct tas2781_hda *tas_hda = dev_get_drvdata(dev); + struct tasdevice_priv *tas_priv = tas_hda->priv; int ret, val; ret = pm_runtime_force_resume(dev); if (ret) return ret; - guard(mutex)(&tas_hda->priv->codec_lock); - ret = tasdevice_spi_dev_read(tas_hda->priv, TAS2781_REG_CLK_CONFIG, - &val); + guard(mutex)(&tas_priv->codec_lock); + ret = tas_priv->dev_read(tas_priv, tas_priv->index, + TAS2781_REG_CLK_CONFIG, &val); if (ret < 0) return ret; if (val == TAS2781_REG_CLK_CONFIG_RESET) { - tas_hda->priv->cur_book = -1; - tas_hda->priv->cur_conf = -1; - tas_hda->priv->cur_prog = -1; + tas_priv->tasdevice[tas_priv->index].cur_book = -1; + tas_priv->tasdevice[tas_priv->index].cur_conf = -1; + tas_priv->tasdevice[tas_priv->index].cur_prog = -1; - ret = tasdevice_spi_prmg_load(tas_hda->priv, 0); + ret = tasdevice_prmg_load(tas_priv, 0); if (ret < 0) { - dev_err(tas_hda->priv->dev, + dev_err(tas_priv->dev, "FW download failed = %d\n", ret); return ret; } + tas_priv->fw_state = TASDEVICE_DSP_FW_ALL_OK; - if (tas_hda->priv->playback_started) - tasdevice_spi_tuning_switch(tas_hda->priv, 0); + if (tas_priv->playback_started) + tasdevice_tuning_switch(tas_priv, 0); } return ret; @@ -1229,3 +1232,4 @@ module_spi_driver(tas2781_hda_spi_driver); MODULE_DESCRIPTION("TAS2781 HDA SPI Driver"); MODULE_AUTHOR("Baojun, Xu, <baojun.xug(a)ti.com>"); MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS("SND_SOC_TAS2781_FMWLIB"); diff --git a/sound/pci/hda/tas2781_spi_fwlib.c b/sound/pci/hda/tas2781_spi_fwlib.c deleted file mode 100644 index d90d022d8449..000000000000 --- a/sound/pci/hda/tas2781_spi_fwlib.c +++ /dev/null @@ -1,2006 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// TAS2781 HDA SPI driver -// -// Copyright 2024 - 2025 Texas Instruments, Inc. -// -// Author: Baojun Xu <baojun.xu(a)ti.com> - -#include <linux/crc8.h> -#include <linux/firmware.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/types.h> -#include <linux/unaligned.h> -#include <sound/pcm_params.h> -#include <sound/soc.h> -#include <sound/tas2781-dsp.h> -#include <sound/tlv.h> - -#include "tas2781-spi.h" - -#define OFFSET_ERROR_BIT BIT(31) - -#define ERROR_PRAM_CRCCHK 0x0000000 -#define ERROR_YRAM_CRCCHK 0x0000001 -#define PPC_DRIVER_CRCCHK 0x00000200 - -#define TAS2781_SA_COEFF_SWAP_REG TASDEVICE_REG(0, 0x35, 0x2c) -#define TAS2781_YRAM_BOOK1 140 -#define TAS2781_YRAM1_PAGE 42 -#define TAS2781_YRAM1_START_REG 88 - -#define TAS2781_YRAM2_START_PAGE 43 -#define TAS2781_YRAM2_END_PAGE 49 -#define TAS2781_YRAM2_START_REG 8 -#define TAS2781_YRAM2_END_REG 127 - -#define TAS2781_YRAM3_PAGE 50 -#define TAS2781_YRAM3_START_REG 8 -#define TAS2781_YRAM3_END_REG 27 - -/* should not include B0_P53_R44-R47 */ -#define TAS2781_YRAM_BOOK2 0 -#define TAS2781_YRAM4_START_PAGE 50 -#define TAS2781_YRAM4_END_PAGE 60 - -#define TAS2781_YRAM5_PAGE 61 -#define TAS2781_YRAM5_START_REG TAS2781_YRAM3_START_REG -#define TAS2781_YRAM5_END_REG TAS2781_YRAM3_END_REG - -#define TASDEVICE_MAXPROGRAM_NUM_KERNEL 5 -#define TASDEVICE_MAXCONFIG_NUM_KERNEL_MULTIPLE_AMPS 64 -#define TASDEVICE_MAXCONFIG_NUM_KERNEL 10 -#define MAIN_ALL_DEVICES_1X 0x01 -#define MAIN_DEVICE_A_1X 0x02 -#define MAIN_DEVICE_B_1X 0x03 -#define MAIN_DEVICE_C_1X 0x04 -#define MAIN_DEVICE_D_1X 0x05 -#define COEFF_DEVICE_A_1X 0x12 -#define COEFF_DEVICE_B_1X 0x13 -#define COEFF_DEVICE_C_1X 0x14 -#define COEFF_DEVICE_D_1X 0x15 -#define PRE_DEVICE_A_1X 0x22 -#define PRE_DEVICE_B_1X 0x23 -#define PRE_DEVICE_C_1X 0x24 -#define PRE_DEVICE_D_1X 0x25 -#define PRE_SOFTWARE_RESET_DEVICE_A 0x41 -#define PRE_SOFTWARE_RESET_DEVICE_B 0x42 -#define PRE_SOFTWARE_RESET_DEVICE_C 0x43 -#define PRE_SOFTWARE_RESET_DEVICE_D 0x44 -#define POST_SOFTWARE_RESET_DEVICE_A 0x45 -#define POST_SOFTWARE_RESET_DEVICE_B 0x46 -#define POST_SOFTWARE_RESET_DEVICE_C 0x47 -#define POST_SOFTWARE_RESET_DEVICE_D 0x48 - -struct tas_crc { - unsigned char offset; - unsigned char len; -}; - -struct blktyp_devidx_map { - unsigned char blktyp; - unsigned char dev_idx; -}; - -/* fixed m68k compiling issue: mapping table can save code field */ -static const struct blktyp_devidx_map ppc3_tas2781_mapping_table[] = { - { MAIN_ALL_DEVICES_1X, 0x80 }, - { MAIN_DEVICE_A_1X, 0x81 }, - { COEFF_DEVICE_A_1X, 0x81 }, - { PRE_DEVICE_A_1X, 0x81 }, - { PRE_SOFTWARE_RESET_DEVICE_A, 0xC1 }, - { POST_SOFTWARE_RESET_DEVICE_A, 0xC1 }, - { MAIN_DEVICE_B_1X, 0x82 }, - { COEFF_DEVICE_B_1X, 0x82 }, - { PRE_DEVICE_B_1X, 0x82 }, - { PRE_SOFTWARE_RESET_DEVICE_B, 0xC2 }, - { POST_SOFTWARE_RESET_DEVICE_B, 0xC2 }, - { MAIN_DEVICE_C_1X, 0x83 }, - { COEFF_DEVICE_C_1X, 0x83 }, - { PRE_DEVICE_C_1X, 0x83 }, - { PRE_SOFTWARE_RESET_DEVICE_C, 0xC3 }, - { POST_SOFTWARE_RESET_DEVICE_C, 0xC3 }, - { MAIN_DEVICE_D_1X, 0x84 }, - { COEFF_DEVICE_D_1X, 0x84 }, - { PRE_DEVICE_D_1X, 0x84 }, - { PRE_SOFTWARE_RESET_DEVICE_D, 0xC4 }, - { POST_SOFTWARE_RESET_DEVICE_D, 0xC4 }, -}; - -static const struct blktyp_devidx_map ppc3_mapping_table[] = { - { MAIN_ALL_DEVICES_1X, 0x80 }, - { MAIN_DEVICE_A_1X, 0x81 }, - { COEFF_DEVICE_A_1X, 0xC1 }, - { PRE_DEVICE_A_1X, 0xC1 }, - { MAIN_DEVICE_B_1X, 0x82 }, - { COEFF_DEVICE_B_1X, 0xC2 }, - { PRE_DEVICE_B_1X, 0xC2 }, - { MAIN_DEVICE_C_1X, 0x83 }, - { COEFF_DEVICE_C_1X, 0xC3 }, - { PRE_DEVICE_C_1X, 0xC3 }, - { MAIN_DEVICE_D_1X, 0x84 }, - { COEFF_DEVICE_D_1X, 0xC4 }, - { PRE_DEVICE_D_1X, 0xC4 }, -}; - -static const struct blktyp_devidx_map non_ppc3_mapping_table[] = { - { MAIN_ALL_DEVICES, 0x80 }, - { MAIN_DEVICE_A, 0x81 }, - { COEFF_DEVICE_A, 0xC1 }, - { PRE_DEVICE_A, 0xC1 }, - { MAIN_DEVICE_B, 0x82 }, - { COEFF_DEVICE_B, 0xC2 }, - { PRE_DEVICE_B, 0xC2 }, - { MAIN_DEVICE_C, 0x83 }, - { COEFF_DEVICE_C, 0xC3 }, - { PRE_DEVICE_C, 0xC3 }, - { MAIN_DEVICE_D, 0x84 }, - { COEFF_DEVICE_D, 0xC4 }, - { PRE_DEVICE_D, 0xC4 }, -}; - -/* - * Device support different configurations for different scene, - * like voice, music, calibration, was write in regbin file. - * Will be stored into tas_priv after regbin was loaded. - */ -static struct tasdevice_config_info *tasdevice_add_config( - struct tasdevice_priv *tas_priv, unsigned char *config_data, - unsigned int config_size, int *status) -{ - struct tasdevice_config_info *cfg_info; - struct tasdev_blk_data **bk_da; - unsigned int config_offset = 0; - unsigned int i; - - /* - * In most projects are many audio cases, such as music, handfree, - * receiver, games, audio-to-haptics, PMIC record, bypass mode, - * portrait, landscape, etc. Even in multiple audios, one or - * two of the chips will work for the special case, such as - * ultrasonic application. In order to support these variable-numbers - * of audio cases, flexible configs have been introduced in the - * DSP firmware. - */ - cfg_info = kzalloc(sizeof(*cfg_info), GFP_KERNEL); - if (!cfg_info) { - *status = -ENOMEM; - return NULL; - } - - if (tas_priv->rcabin.fw_hdr.binary_version_num >= 0x105) { - if ((config_offset + 64) > config_size) { - *status = -EINVAL; - dev_err(tas_priv->dev, "add conf: Out of boundary\n"); - goto config_err; - } - config_offset += 64; - } - - if ((config_offset + 4) > config_size) { - *status = -EINVAL; - dev_err(tas_priv->dev, "add config: Out of boundary\n"); - goto config_err; - } - - /* - * convert data[offset], data[offset + 1], data[offset + 2] and - * data[offset + 3] into host - */ - cfg_info->nblocks = get_unaligned_be32(&config_data[config_offset]); - config_offset += 4; - - /* - * Several kinds of dsp/algorithm firmwares can run on tas2781, - * the number and size of blk are not fixed and different among - * these firmwares. - */ - bk_da = cfg_info->blk_data = kcalloc(cfg_info->nblocks, - sizeof(*bk_da), GFP_KERNEL); - if (!bk_da) { - *status = -ENOMEM; - goto config_err; - } - cfg_info->real_nblocks = 0; - for (i = 0; i < cfg_info->nblocks; i++) { - if (config_offset + 12 > config_size) { - *status = -EINVAL; - dev_err(tas_priv->dev, - "%s: Out of boundary: i = %d nblocks = %u!\n", - __func__, i, cfg_info->nblocks); - goto block_err; - } - bk_da[i] = kzalloc(sizeof(*bk_da[i]), GFP_KERNEL); - if (!bk_da[i]) { - *status = -ENOMEM; - goto block_err; - } - - bk_da[i]->dev_idx = config_data[config_offset]; - config_offset++; - - bk_da[i]->block_type = config_data[config_offset]; - config_offset++; - - bk_da[i]->yram_checksum = - get_unaligned_be16(&config_data[config_offset]); - config_offset += 2; - bk_da[i]->block_size = - get_unaligned_be32(&config_data[config_offset]); - config_offset += 4; - - bk_da[i]->n_subblks = - get_unaligned_be32(&config_data[config_offset]); - - config_offset += 4; - - if (config_offset + bk_da[i]->block_size > config_size) { - *status = -EINVAL; - dev_err(tas_priv->dev, - "%s: Out of boundary: i = %d blks = %u!\n", - __func__, i, cfg_info->nblocks); - goto block_err; - } - /* instead of kzalloc+memcpy */ - bk_da[i]->regdata = kmemdup(&config_data[config_offset], - bk_da[i]->block_size, GFP_KERNEL); - if (!bk_da[i]->regdata) { - *status = -ENOMEM; - i++; - goto block_err; - } - - config_offset += bk_da[i]->block_size; - cfg_info->real_nblocks += 1; - } - - return cfg_info; -block_err: - for (int j = 0; j < i; j++) - kfree(bk_da[j]); - kfree(bk_da); -config_err: - kfree(cfg_info); - return NULL; -} - -/* Regbin file parser function. */ -int tasdevice_spi_rca_parser(void *context, const struct firmware *fmw) -{ - struct tasdevice_priv *tas_priv = context; - struct tasdevice_config_info **cfg_info; - struct tasdevice_rca_hdr *fw_hdr; - struct tasdevice_rca *rca; - unsigned int total_config_sz = 0; - int offset = 0, ret = 0, i; - unsigned char *buf; - - rca = &tas_priv->rcabin; - fw_hdr = &rca->fw_hdr; - if (!fmw || !fmw->data) { - dev_err(tas_priv->dev, "Failed to read %s\n", - tas_priv->rca_binaryname); - tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; - return -EINVAL; - } - buf = (unsigned char *)fmw->data; - fw_hdr->img_sz = get_unaligned_be32(&buf[offset]); - offset += 4; - if (fw_hdr->img_sz != fmw->size) { - dev_err(tas_priv->dev, - "File size not match, %d %u", (int)fmw->size, - fw_hdr->img_sz); - tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; - return -EINVAL; - } - - fw_hdr->checksum = get_unaligned_be32(&buf[offset]); - offset += 4; - fw_hdr->binary_version_num = get_unaligned_be32(&buf[offset]); - if (fw_hdr->binary_version_num < 0x103) { - dev_err(tas_priv->dev, "File version 0x%04x is too low", - fw_hdr->binary_version_num); - tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; - return -EINVAL; - } - offset += 4; - fw_hdr->drv_fw_version = get_unaligned_be32(&buf[offset]); - offset += 8; - fw_hdr->plat_type = buf[offset++]; - fw_hdr->dev_family = buf[offset++]; - fw_hdr->reserve = buf[offset++]; - fw_hdr->ndev = buf[offset++]; - if (offset + TASDEVICE_DEVICE_SUM > fw_hdr->img_sz) { - dev_err(tas_priv->dev, "rca_ready: Out of boundary!\n"); - tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; - return -EINVAL; - } - - for (i = 0; i < TASDEVICE_DEVICE_SUM; i++, offset++) - fw_hdr->devs[i] = buf[offset]; - - fw_hdr->nconfig = get_unaligned_be32(&buf[offset]); - offset += 4; - - for (i = 0; i < TASDEVICE_CONFIG_SUM; i++) { - fw_hdr->config_size[i] = get_unaligned_be32(&buf[offset]); - offset += 4; - total_config_sz += fw_hdr->config_size[i]; - } - - if (fw_hdr->img_sz - total_config_sz != (unsigned int)offset) { - dev_err(tas_priv->dev, "Bin file err %d - %d != %d!\n", - fw_hdr->img_sz, total_config_sz, (int)offset); - tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; - return -EINVAL; - } - - cfg_info = kcalloc(fw_hdr->nconfig, sizeof(*cfg_info), GFP_KERNEL); - if (!cfg_info) { - tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; - return -ENOMEM; - } - rca->cfg_info = cfg_info; - rca->ncfgs = 0; - for (i = 0; i < (int)fw_hdr->nconfig; i++) { - rca->ncfgs += 1; - cfg_info[i] = tasdevice_add_config(tas_priv, &buf[offset], - fw_hdr->config_size[i], &ret); - if (ret) { - tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; - return ret; - } - offset += (int)fw_hdr->config_size[i]; - } - - return ret; -} - -/* fixed m68k compiling issue: mapping table can save code field */ -static unsigned char map_dev_idx(struct tasdevice_fw *tas_fmw, - struct tasdev_blk *block) -{ - struct blktyp_devidx_map *p = - (struct blktyp_devidx_map *)non_ppc3_mapping_table; - struct tasdevice_dspfw_hdr *fw_hdr = &tas_fmw->fw_hdr; - struct tasdevice_fw_fixed_hdr *fw_fixed_hdr = &fw_hdr->fixed_hdr; - int i, n = ARRAY_SIZE(non_ppc3_mapping_table); - unsigned char dev_idx = 0; - - if (fw_fixed_hdr->ppcver >= PPC3_VERSION_TAS2781_BASIC_MIN) { - p = (struct blktyp_devidx_map *)ppc3_tas2781_mapping_table; - n = ARRAY_SIZE(ppc3_tas2781_mapping_table); - } else if (fw_fixed_hdr->ppcver >= PPC3_VERSION_BASE) { - p = (struct blktyp_devidx_map *)ppc3_mapping_table; - n = ARRAY_SIZE(ppc3_mapping_table); - } - - for (i = 0; i < n; i++) { - if (block->type == p[i].blktyp) { - dev_idx = p[i].dev_idx; - break; - } - } - - return dev_idx; -} - -/* Block parser function. */ -static int fw_parse_block_data_kernel(struct tasdevice_fw *tas_fmw, - struct tasdev_blk *block, const struct firmware *fmw, int offset) -{ - const unsigned char *data = fmw->data; - - if (offset + 16 > fmw->size) { - dev_err(tas_fmw->dev, "%s: File Size error\n", __func__); - return -EINVAL; - } - - /* - * Convert data[offset], data[offset + 1], data[offset + 2] and - * data[offset + 3] into host. - */ - block->type = get_unaligned_be32(&data[offset]); - offset += 4; - - block->is_pchksum_present = data[offset++]; - block->pchksum = data[offset++]; - block->is_ychksum_present = data[offset++]; - block->ychksum = data[offset++]; - block->blk_size = get_unaligned_be32(&data[offset]); - offset += 4; - block->nr_subblocks = get_unaligned_be32(&data[offset]); - offset += 4; - - /* - * Fixed m68k compiling issue: - * 1. mapping table can save code field. - * 2. storing the dev_idx as a member of block can reduce unnecessary - * time and system resource comsumption of dev_idx mapping every - * time the block data writing to the dsp. - */ - block->dev_idx = map_dev_idx(tas_fmw, block); - - if (offset + block->blk_size > fmw->size) { - dev_err(tas_fmw->dev, "%s: nSublocks error\n", __func__); - return -EINVAL; - } - /* instead of kzalloc+memcpy */ - block->data = kmemdup(&data[offset], block->blk_size, GFP_KERNEL); - if (!block->data) - return -ENOMEM; - - offset += block->blk_size; - - return offset; -} - -/* Data of block parser function. */ -static int fw_parse_data_kernel(struct tasdevice_fw *tas_fmw, - struct tasdevice_data *img_data, const struct firmware *fmw, - int offset) -{ - const unsigned char *data = fmw->data; - struct tasdev_blk *blk; - unsigned int i; - - if (offset + 4 > fmw->size) { - dev_err(tas_fmw->dev, "%s: File Size error\n", __func__); - return -EINVAL; - } - img_data->nr_blk = get_unaligned_be32(&data[offset]); - offset += 4; - - img_data->dev_blks = kcalloc(img_data->nr_blk, - sizeof(struct tasdev_blk), GFP_KERNEL); - if (!img_data->dev_blks) - return -ENOMEM; - - for (i = 0; i < img_data->nr_blk; i++) { - blk = &img_data->dev_blks[i]; - offset = fw_parse_block_data_kernel( - tas_fmw, blk, fmw, offset); - if (offset < 0) { - kfree(img_data->dev_blks); - return -EINVAL; - } - } - - return offset; -} - -/* Data of DSP program parser function. */ -static int fw_parse_program_data_kernel( - struct tasdevice_priv *tas_priv, struct tasdevice_fw *tas_fmw, - const struct firmware *fmw, int offset) -{ - struct tasdevice_prog *program; - unsigned int i; - - for (i = 0; i < tas_fmw->nr_programs; i++) { - program = &tas_fmw->programs[i]; - if (offset + 72 > fmw->size) { - dev_err(tas_priv->dev, "%s: mpName error\n", __func__); - return -EINVAL; - } - /* skip 72 unused byts */ - offset += 72; - - offset = fw_parse_data_kernel(tas_fmw, &program->dev_data, - fmw, offset); - if (offset < 0) - break; - } - - return offset; -} - -/* Data of DSP configurations parser function. */ -static int fw_parse_configuration_data_kernel(struct tasdevice_priv *tas_priv, - struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) -{ - const unsigned char *data = fmw->data; - struct tasdevice_config *config; - unsigned int i; - - for (i = 0; i < tas_fmw->nr_configurations; i++) { - config = &tas_fmw->configs[i]; - if (offset + 80 > fmw->size) { - dev_err(tas_priv->dev, "%s: mpName error\n", __func__); - return -EINVAL; - } - memcpy(config->name, &data[offset], 64); - /* skip extra 16 bytes */ - offset += 80; - - offset = fw_parse_data_kernel(tas_fmw, &config->dev_data, - fmw, offset); - if (offset < 0) - break; - } - - return offset; -} - -/* DSP firmware file header parser function for early PPC3 firmware binary. */ -static int fw_parse_variable_header_kernel(struct tasdevice_priv *tas_priv, - const struct firmware *fmw, int offset) -{ - struct tasdevice_fw *tas_fmw = tas_priv->fmw; - struct tasdevice_dspfw_hdr *fw_hdr = &tas_fmw->fw_hdr; - struct tasdevice_config *config; - struct tasdevice_prog *program; - const unsigned char *buf = fmw->data; - unsigned short max_confs; - unsigned int i; - - if (offset + 12 + 4 * TASDEVICE_MAXPROGRAM_NUM_KERNEL > fmw->size) { - dev_err(tas_priv->dev, "%s: File Size error\n", __func__); - return -EINVAL; - } - fw_hdr->device_family = get_unaligned_be16(&buf[offset]); - if (fw_hdr->device_family != 0) { - dev_err(tas_priv->dev, "%s:not TAS device\n", __func__); - return -EINVAL; - } - offset += 2; - fw_hdr->device = get_unaligned_be16(&buf[offset]); - if (fw_hdr->device >= TASDEVICE_DSP_TAS_MAX_DEVICE || - fw_hdr->device == 6) { - dev_err(tas_priv->dev, "Unsupported dev %d\n", fw_hdr->device); - return -EINVAL; - } - offset += 2; - - tas_fmw->nr_programs = get_unaligned_be32(&buf[offset]); - offset += 4; - - if (tas_fmw->nr_programs == 0 || - tas_fmw->nr_programs > TASDEVICE_MAXPROGRAM_NUM_KERNEL) { - dev_err(tas_priv->dev, "mnPrograms is invalid\n"); - return -EINVAL; - } - - tas_fmw->programs = kcalloc(tas_fmw->nr_programs, - sizeof(*tas_fmw->programs), GFP_KERNEL); - if (!tas_fmw->programs) - return -ENOMEM; - - for (i = 0; i < tas_fmw->nr_programs; i++) { - program = &tas_fmw->programs[i]; - program->prog_size = get_unaligned_be32(&buf[offset]); - offset += 4; - } - - /* Skip the unused prog_size */ - offset += 4 * (TASDEVICE_MAXPROGRAM_NUM_KERNEL - tas_fmw->nr_programs); - - tas_fmw->nr_configurations = get_unaligned_be32(&buf[offset]); - offset += 4; - - /* - * The max number of config in firmware greater than 4 pieces of - * tas2781s is different from the one lower than 4 pieces of - * tas2781s. - */ - max_confs = TASDEVICE_MAXCONFIG_NUM_KERNEL; - if (tas_fmw->nr_configurations == 0 || - tas_fmw->nr_configurations > max_confs) { - dev_err(tas_priv->dev, "%s: Conf is invalid\n", __func__); - kfree(tas_fmw->programs); - return -EINVAL; - } - - if (offset + 4 * max_confs > fmw->size) { - dev_err(tas_priv->dev, "%s: mpConfigurations err\n", __func__); - kfree(tas_fmw->programs); - return -EINVAL; - } - - tas_fmw->configs = kcalloc(tas_fmw->nr_configurations, - sizeof(*tas_fmw->configs), GFP_KERNEL); - if (!tas_fmw->configs) { - kfree(tas_fmw->programs); - return -ENOMEM; - } - - for (i = 0; i < tas_fmw->nr_programs; i++) { - config = &tas_fmw->configs[i]; - config->cfg_size = get_unaligned_be32(&buf[offset]); - offset += 4; - } - - /* Skip the unused configs */ - offset += 4 * (max_confs - tas_fmw->nr_programs); - - return offset; -} - -/* - * In sub-block data, have three type sub-block: - * 1. Single byte write. - * 2. Multi-byte write. - * 3. Delay. - * 4. Bits update. - * This function perform single byte write to device. - */ -static int tasdevice_single_byte_wr(void *context, int dev_idx, - unsigned char *data, int sublocksize) -{ - struct tasdevice_priv *tas_priv = context; - unsigned short len = get_unaligned_be16(&data[2]); - int i, subblk_offset, rc; - - subblk_offset = 4; - if (subblk_offset + 4 * len > sublocksize) { - dev_err(tas_priv->dev, "process_block: Out of boundary\n"); - return 0; - } - - for (i = 0; i < len; i++) { - if (dev_idx == (tas_priv->index + 1) || dev_idx == 0) { - rc = tasdevice_spi_dev_write(tas_priv, - TASDEVICE_REG(data[subblk_offset], - data[subblk_offset + 1], - data[subblk_offset + 2]), - data[subblk_offset + 3]); - if (rc < 0) { - dev_err(tas_priv->dev, - "process_block: single write error\n"); - subblk_offset |= OFFSET_ERROR_BIT; - } - } - subblk_offset += 4; - } - - return subblk_offset; -} - -/* - * In sub-block data, have three type sub-block: - * 1. Single byte write. - * 2. Multi-byte write. - * 3. Delay. - * 4. Bits update. - * This function perform multi-write to device. - */ -static int tasdevice_burst_wr(void *context, int dev_idx, unsigned char *data, - int sublocksize) -{ - struct tasdevice_priv *tas_priv = context; - unsigned short len = get_unaligned_be16(&data[2]); - int subblk_offset, rc; - - subblk_offset = 4; - if (subblk_offset + 4 + len > sublocksize) { - dev_err(tas_priv->dev, "%s: BST Out of boundary\n", __func__); - subblk_offset |= OFFSET_ERROR_BIT; - } - if (len % 4) { - dev_err(tas_priv->dev, "%s:Bst-len(%u)not div by 4\n", - __func__, len); - subblk_offset |= OFFSET_ERROR_BIT; - } - - if (dev_idx == (tas_priv->index + 1) || dev_idx == 0) { - rc = tasdevice_spi_dev_bulk_write(tas_priv, - TASDEVICE_REG(data[subblk_offset], - data[subblk_offset + 1], - data[subblk_offset + 2]), - &data[subblk_offset + 4], len); - if (rc < 0) { - dev_err(tas_priv->dev, "%s: bulk_write error = %d\n", - __func__, rc); - subblk_offset |= OFFSET_ERROR_BIT; - } - } - subblk_offset += (len + 4); - - return subblk_offset; -} - -/* Just delay for ms.*/ -static int tasdevice_delay(void *context, int dev_idx, unsigned char *data, - int sublocksize) -{ - struct tasdevice_priv *tas_priv = context; - unsigned int sleep_time, subblk_offset = 2; - - if (subblk_offset + 2 > sublocksize) { - dev_err(tas_priv->dev, "%s: delay Out of boundary\n", - __func__); - subblk_offset |= OFFSET_ERROR_BIT; - } - if (dev_idx == (tas_priv->index + 1) || dev_idx == 0) { - sleep_time = get_unaligned_be16(&data[2]) * 1000; - fsleep(sleep_time); - } - subblk_offset += 2; - - return subblk_offset; -} - -/* - * In sub-block data, have three type sub-block: - * 1. Single byte write. - * 2. Multi-byte write. - * 3. Delay. - * 4. Bits update. - * This function perform bits update. - */ -static int tasdevice_field_wr(void *context, int dev_idx, unsigned char *data, - int sublocksize) -{ - struct tasdevice_priv *tas_priv = context; - int rc, subblk_offset = 2; - - if (subblk_offset + 6 > sublocksize) { - dev_err(tas_priv->dev, "%s: bit write Out of boundary\n", - __func__); - subblk_offset |= OFFSET_ERROR_BIT; - } - if (dev_idx == (tas_priv->index + 1) || dev_idx == 0) { - rc = tasdevice_spi_dev_update_bits(tas_priv, - TASDEVICE_REG(data[subblk_offset + 2], - data[subblk_offset + 3], - data[subblk_offset + 4]), - data[subblk_offset + 1], - data[subblk_offset + 5]); - if (rc < 0) { - dev_err(tas_priv->dev, "%s: update_bits error = %d\n", - __func__, rc); - subblk_offset |= OFFSET_ERROR_BIT; - } - } - subblk_offset += 6; - - return subblk_offset; -} - -/* Data block process function. */ -static int tasdevice_process_block(void *context, unsigned char *data, - unsigned char dev_idx, int sublocksize) -{ - struct tasdevice_priv *tas_priv = context; - int blktyp = dev_idx & 0xC0, subblk_offset; - unsigned char subblk_typ = data[1]; - - switch (subblk_typ) { - case TASDEVICE_CMD_SING_W: - subblk_offset = tasdevice_single_byte_wr(tas_priv, - dev_idx & 0x3f, data, sublocksize); - break; - case TASDEVICE_CMD_BURST: - subblk_offset = tasdevice_burst_wr(tas_priv, - dev_idx & 0x3f, data, sublocksize); - break; - case TASDEVICE_CMD_DELAY: - subblk_offset = tasdevice_delay(tas_priv, - dev_idx & 0x3f, data, sublocksize); - break; - case TASDEVICE_CMD_FIELD_W: - subblk_offset = tasdevice_field_wr(tas_priv, - dev_idx & 0x3f, data, sublocksize); - break; - default: - subblk_offset = 2; - break; - } - if (((subblk_offset & OFFSET_ERROR_BIT) != 0) && blktyp != 0) { - if (blktyp == 0x80) { - tas_priv->cur_prog = -1; - tas_priv->cur_conf = -1; - } else - tas_priv->cur_conf = -1; - } - subblk_offset &= ~OFFSET_ERROR_BIT; - - return subblk_offset; -} - -/* - * Device support different configurations for different scene, - * this function was used for choose different config. - */ -void tasdevice_spi_select_cfg_blk(void *pContext, int conf_no, - unsigned char block_type) -{ - struct tasdevice_priv *tas_priv = pContext; - struct tasdevice_rca *rca = &tas_priv->rcabin; - struct tasdevice_config_info **cfg_info = rca->cfg_info; - struct tasdev_blk_data **blk_data; - unsigned int j, k; - - if (conf_no >= rca->ncfgs || conf_no < 0 || !cfg_info) { - dev_err(tas_priv->dev, "conf_no should be not more than %u\n", - rca->ncfgs); - return; - } - blk_data = cfg_info[conf_no]->blk_data; - - for (j = 0; j < cfg_info[conf_no]->real_nblocks; j++) { - unsigned int length = 0, rc = 0; - - if (block_type > 5 || block_type < 2) { - dev_err(tas_priv->dev, - "block_type should be in range from 2 to 5\n"); - break; - } - if (block_type != blk_data[j]->block_type) - continue; - - for (k = 0; k < blk_data[j]->n_subblks; k++) { - tas_priv->is_loading = true; - - rc = tasdevice_process_block(tas_priv, - blk_data[j]->regdata + length, - blk_data[j]->dev_idx, - blk_data[j]->block_size - length); - length += rc; - if (blk_data[j]->block_size < length) { - dev_err(tas_priv->dev, - "%s: %u %u out of boundary\n", - __func__, length, - blk_data[j]->block_size); - break; - } - } - if (length != blk_data[j]->block_size) - dev_err(tas_priv->dev, "%s: %u %u size is not same\n", - __func__, length, blk_data[j]->block_size); - } -} - -/* Block process function. */ -static int tasdevice_load_block_kernel( - struct tasdevice_priv *tasdevice, struct tasdev_blk *block) -{ - const unsigned int blk_size = block->blk_size; - unsigned char *data = block->data; - unsigned int i, length; - - for (i = 0, length = 0; i < block->nr_subblocks; i++) { - int rc = tasdevice_process_block(tasdevice, data + length, - block->dev_idx, blk_size - length); - if (rc < 0) { - dev_err(tasdevice->dev, - "%s: %u %u sublock write error\n", - __func__, length, blk_size); - return rc; - } - length += rc; - if (blk_size < length) { - dev_err(tasdevice->dev, "%s: %u %u out of boundary\n", - __func__, length, blk_size); - rc = -ENOMEM; - return rc; - } - } - - return 0; -} - -/* DSP firmware file header parser function. */ -static int fw_parse_variable_hdr(struct tasdevice_priv *tas_priv, - struct tasdevice_dspfw_hdr *fw_hdr, - const struct firmware *fmw, int offset) -{ - const unsigned char *buf = fmw->data; - int len = strlen((char *)&buf[offset]); - - len++; - - if (offset + len + 8 > fmw->size) { - dev_err(tas_priv->dev, "%s: File Size error\n", __func__); - return -EINVAL; - } - - offset += len; - - fw_hdr->device_family = get_unaligned_be32(&buf[offset]); - if (fw_hdr->device_family != 0) { - dev_err(tas_priv->dev, "%s: not TAS device\n", __func__); - return -EINVAL; - } - offset += 4; - - fw_hdr->device = get_unaligned_be32(&buf[offset]); - if (fw_hdr->device >= TASDEVICE_DSP_TAS_MAX_DEVICE || - fw_hdr->device == 6) { - dev_err(tas_priv->dev, "Unsupported dev %d\n", fw_hdr->device); - return -EINVAL; - } - offset += 4; - fw_hdr->ndev = 1; - - return offset; -} - -/* DSP firmware file header parser function for size variabled header. */ -static int fw_parse_variable_header_git(struct tasdevice_priv - *tas_priv, const struct firmware *fmw, int offset) -{ - struct tasdevice_fw *tas_fmw = tas_priv->fmw; - struct tasdevice_dspfw_hdr *fw_hdr = &tas_fmw->fw_hdr; - - offset = fw_parse_variable_hdr(tas_priv, fw_hdr, fmw, offset); - - return offset; -} - -/* DSP firmware file block parser function. */ -static int fw_parse_block_data(struct tasdevice_fw *tas_fmw, - struct tasdev_blk *block, const struct firmware *fmw, int offset) -{ - unsigned char *data = (unsigned char *)fmw->data; - int n; - - if (offset + 8 > fmw->size) { - dev_err(tas_fmw->dev, "%s: Type error\n", __func__); - return -EINVAL; - } - block->type = get_unaligned_be32(&data[offset]); - offset += 4; - - if (tas_fmw->fw_hdr.fixed_hdr.drv_ver >= PPC_DRIVER_CRCCHK) { - if (offset + 8 > fmw->size) { - dev_err(tas_fmw->dev, "PChkSumPresent error\n"); - return -EINVAL; - } - block->is_pchksum_present = data[offset]; - offset++; - - block->pchksum = data[offset]; - offset++; - - block->is_ychksum_present = data[offset]; - offset++; - - block->ychksum = data[offset]; - offset++; - } else { - block->is_pchksum_present = 0; - block->is_ychksum_present = 0; - } - - block->nr_cmds = get_unaligned_be32(&data[offset]); - offset += 4; - - n = block->nr_cmds * 4; - if (offset + n > fmw->size) { - dev_err(tas_fmw->dev, - "%s: File Size(%lu) error offset = %d n = %d\n", - __func__, (unsigned long)fmw->size, offset, n); - return -EINVAL; - } - /* instead of kzalloc+memcpy */ - block->data = kmemdup(&data[offset], n, GFP_KERNEL); - if (!block->data) - return -ENOMEM; - - offset += n; - - return offset; -} - -/* - * When parsing error occurs, all the memory resource will be released - * in the end of tasdevice_rca_ready. - */ -static int fw_parse_data(struct tasdevice_fw *tas_fmw, - struct tasdevice_data *img_data, const struct firmware *fmw, - int offset) -{ - const unsigned char *data = (unsigned char *)fmw->data; - struct tasdev_blk *blk; - unsigned int i, n; - - if (offset + 64 > fmw->size) { - dev_err(tas_fmw->dev, "%s: Name error\n", __func__); - return -EINVAL; - } - memcpy(img_data->name, &data[offset], 64); - offset += 64; - - n = strlen((char *)&data[offset]); - n++; - if (offset + n + 2 > fmw->size) { - dev_err(tas_fmw->dev, "%s: Description error\n", __func__); - return -EINVAL; - } - offset += n; - img_data->nr_blk = get_unaligned_be16(&data[offset]); - offset += 2; - - img_data->dev_blks = kcalloc(img_data->nr_blk, - sizeof(*img_data->dev_blks), GFP_KERNEL); - if (!img_data->dev_blks) - return -ENOMEM; - - for (i = 0; i < img_data->nr_blk; i++) { - blk = &img_data->dev_blks[i]; - offset = fw_parse_block_data(tas_fmw, blk, fmw, offset); - if (offset < 0) - return -EINVAL; - } - - return offset; -} - -/* - * When parsing error occurs, all the memory resource will be released - * in the end of tasdevice_rca_ready. - */ -static int fw_parse_program_data(struct tasdevice_priv *tas_priv, - struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) -{ - unsigned char *buf = (unsigned char *)fmw->data; - struct tasdevice_prog *program; - int i; - - if (offset + 2 > fmw->size) { - dev_err(tas_priv->dev, "%s: File Size error\n", __func__); - return -EINVAL; - } - tas_fmw->nr_programs = get_unaligned_be16(&buf[offset]); - offset += 2; - - if (tas_fmw->nr_programs == 0) { - /* Not error in calibration Data file, return directly */ - dev_dbg(tas_priv->dev, "%s: No Programs data, maybe calbin\n", - __func__); - return offset; - } - - tas_fmw->programs = - kcalloc(tas_fmw->nr_programs, sizeof(*tas_fmw->programs), - GFP_KERNEL); - if (!tas_fmw->programs) - return -ENOMEM; - - for (i = 0; i < tas_fmw->nr_programs; i++) { - int n = 0; - - program = &tas_fmw->programs[i]; - if (offset + 64 > fmw->size) { - dev_err(tas_priv->dev, "%s: mpName error\n", __func__); - return -EINVAL; - } - offset += 64; - - n = strlen((char *)&buf[offset]); - /* skip '\0' and 5 unused bytes */ - n += 6; - if (offset + n > fmw->size) { - dev_err(tas_priv->dev, "Description err\n"); - return -EINVAL; - } - - offset += n; - - offset = fw_parse_data(tas_fmw, &program->dev_data, fmw, - offset); - if (offset < 0) - return offset; - } - - return offset; -} - -/* - * When parsing error occurs, all the memory resource will be released - * in the end of tasdevice_rca_ready. - */ -static int fw_parse_configuration_data(struct tasdevice_priv *tas_priv, - struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) -{ - unsigned char *data = (unsigned char *)fmw->data; - struct tasdevice_config *config; - unsigned int i, n; - - if (offset + 2 > fmw->size) { - dev_err(tas_priv->dev, "%s: File Size error\n", __func__); - return -EINVAL; - } - tas_fmw->nr_configurations = get_unaligned_be16(&data[offset]); - offset += 2; - - if (tas_fmw->nr_configurations == 0) { - dev_err(tas_priv->dev, "%s: Conf is zero\n", __func__); - /* Not error for calibration Data file, return directly */ - return offset; - } - tas_fmw->configs = kcalloc(tas_fmw->nr_configurations, - sizeof(*tas_fmw->configs), GFP_KERNEL); - if (!tas_fmw->configs) - return -ENOMEM; - for (i = 0; i < tas_fmw->nr_configurations; i++) { - config = &tas_fmw->configs[i]; - if (offset + 64 > fmw->size) { - dev_err(tas_priv->dev, "File Size err\n"); - return -EINVAL; - } - memcpy(config->name, &data[offset], 64); - offset += 64; - - n = strlen((char *)&data[offset]); - n += 15; - if (offset + n > fmw->size) { - dev_err(tas_priv->dev, "Description err\n"); - return -EINVAL; - } - offset += n; - offset = fw_parse_data(tas_fmw, &config->dev_data, - fmw, offset); - if (offset < 0) - break; - } - - return offset; -} - -/* yram5 page check. */ -static bool check_inpage_yram_rg(struct tas_crc *cd, - unsigned char reg, unsigned char len) -{ - bool in = false; - - if (reg <= TAS2781_YRAM5_END_REG && - reg >= TAS2781_YRAM5_START_REG) { - if (reg + len > TAS2781_YRAM5_END_REG) - cd->len = TAS2781_YRAM5_END_REG - reg + 1; - else - cd->len = len; - cd->offset = reg; - in = true; - } else if (reg < TAS2781_YRAM5_START_REG) { - if (reg + len > TAS2781_YRAM5_START_REG) { - cd->offset = TAS2781_YRAM5_START_REG; - cd->len = len - TAS2781_YRAM5_START_REG + reg; - in = true; - } - } - - return in; -} - -/* DSP firmware yram block check. */ -static bool check_inpage_yram_bk1(struct tas_crc *cd, - unsigned char page, unsigned char reg, unsigned char len) -{ - bool in = false; - - if (page == TAS2781_YRAM1_PAGE) { - if (reg >= TAS2781_YRAM1_START_REG) { - cd->offset = reg; - cd->len = len; - in = true; - } else if (reg + len > TAS2781_YRAM1_START_REG) { - cd->offset = TAS2781_YRAM1_START_REG; - cd->len = len - TAS2781_YRAM1_START_REG + reg; - in = true; - } - } else if (page == TAS2781_YRAM3_PAGE) { - in = check_inpage_yram_rg(cd, reg, len); - } - - return in; -} - -/* - * Return Code: - * true -- the registers are in the inpage yram - * false -- the registers are NOT in the inpage yram - */ -static bool check_inpage_yram(struct tas_crc *cd, unsigned char book, - unsigned char page, unsigned char reg, unsigned char len) -{ - bool in = false; - - if (book == TAS2781_YRAM_BOOK1) - in = check_inpage_yram_bk1(cd, page, reg, len); - else if (book == TAS2781_YRAM_BOOK2 && page == TAS2781_YRAM5_PAGE) - in = check_inpage_yram_rg(cd, reg, len); - - return in; -} - -/* yram4 page check. */ -static bool check_inblock_yram_bk(struct tas_crc *cd, - unsigned char page, unsigned char reg, unsigned char len) -{ - bool in = false; - - if ((page >= TAS2781_YRAM4_START_PAGE && - page <= TAS2781_YRAM4_END_PAGE) || - (page >= TAS2781_YRAM2_START_PAGE && - page <= TAS2781_YRAM2_END_PAGE)) { - if (reg <= TAS2781_YRAM2_END_REG && - reg >= TAS2781_YRAM2_START_REG) { - cd->offset = reg; - cd->len = len; - in = true; - } else if (reg < TAS2781_YRAM2_START_REG) { - if (reg + len - 1 >= TAS2781_YRAM2_START_REG) { - cd->offset = TAS2781_YRAM2_START_REG; - cd->len = reg + len - TAS2781_YRAM2_START_REG; - in = true; - } - } - } - - return in; -} - -/* - * Return Code: - * true -- the registers are in the inblock yram - * false -- the registers are NOT in the inblock yram - */ -static bool check_inblock_yram(struct tas_crc *cd, unsigned char book, - unsigned char page, unsigned char reg, unsigned char len) -{ - bool in = false; - - if (book == TAS2781_YRAM_BOOK1 || book == TAS2781_YRAM_BOOK2) - in = check_inblock_yram_bk(cd, page, reg, len); - - return in; -} - -/* yram page check. */ -static bool check_yram(struct tas_crc *cd, unsigned char book, - unsigned char page, unsigned char reg, unsigned char len) -{ - bool in; - - in = check_inpage_yram(cd, book, page, reg, len); - if (!in) - in = check_inblock_yram(cd, book, page, reg, len); - - return in; -} - -/* Checksum for data block. */ -static int tasdev_multibytes_chksum(struct tasdevice_priv *tasdevice, - unsigned char book, unsigned char page, - unsigned char reg, unsigned int len) -{ - struct tas_crc crc_data; - unsigned char crc_chksum = 0; - unsigned char nBuf1[128]; - int ret = 0, i; - bool in; - - if ((reg + len - 1) > 127) { - ret = -EINVAL; - dev_err(tasdevice->dev, "firmware error\n"); - goto end; - } - - if ((book == TASDEVICE_BOOK_ID(TAS2781_SA_COEFF_SWAP_REG)) && - (page == TASDEVICE_PAGE_ID(TAS2781_SA_COEFF_SWAP_REG)) && - (reg == TASDEVICE_REG_ID(TAS2781_SA_COEFF_SWAP_REG)) && - (len == 4)) { - /* DSP swap command, pass */ - ret = 0; - goto end; - } - - in = check_yram(&crc_data, book, page, reg, len); - if (!in) - goto end; - - if (len == 1) { - dev_err(tasdevice->dev, "firmware error\n"); - ret = -EINVAL; - goto end; - } - - ret = tasdevice_spi_dev_bulk_read(tasdevice, - TASDEVICE_REG(book, page, crc_data.offset), - nBuf1, crc_data.len); - if (ret < 0) - goto end; - - for (i = 0; i < crc_data.len; i++) { - if ((book == TASDEVICE_BOOK_ID(TAS2781_SA_COEFF_SWAP_REG)) && - (page == TASDEVICE_PAGE_ID(TAS2781_SA_COEFF_SWAP_REG)) && - ((i + crc_data.offset) >= - TASDEVICE_REG_ID(TAS2781_SA_COEFF_SWAP_REG)) && - ((i + crc_data.offset) <= - (TASDEVICE_REG_ID(TAS2781_SA_COEFF_SWAP_REG) + 4))) - /* DSP swap command, bypass */ - continue; - else - crc_chksum += crc8(tasdevice->crc8_lkp_tbl, &nBuf1[i], - 1, 0); - } - - ret = crc_chksum; - -end: - return ret; -} - -/* Checksum for single register. */ -static int do_singlereg_checksum(struct tasdevice_priv *tasdevice, - unsigned char book, unsigned char page, - unsigned char reg, unsigned char val) -{ - struct tas_crc crc_data; - unsigned int nData1; - int ret = 0; - bool in; - - /* DSP swap command, pass */ - if ((book == TASDEVICE_BOOK_ID(TAS2781_SA_COEFF_SWAP_REG)) && - (page == TASDEVICE_PAGE_ID(TAS2781_SA_COEFF_SWAP_REG)) && - (reg >= TASDEVICE_REG_ID(TAS2781_SA_COEFF_SWAP_REG)) && - (reg <= (TASDEVICE_REG_ID(TAS2781_SA_COEFF_SWAP_REG) + 4))) - return 0; - - in = check_yram(&crc_data, book, page, reg, 1); - if (!in) - return 0; - ret = tasdevice_spi_dev_read(tasdevice, - TASDEVICE_REG(book, page, reg), &nData1); - if (ret < 0) - return ret; - - if (nData1 != val) { - dev_err(tasdevice->dev, - "B[0x%x]P[0x%x]R[0x%x] W[0x%x], R[0x%x]\n", - book, page, reg, val, nData1); - tasdevice->err_code |= ERROR_YRAM_CRCCHK; - return -EAGAIN; - } - - ret = crc8(tasdevice->crc8_lkp_tbl, &val, 1, 0); - - return ret; -} - -/* Block type check. */ -static void set_err_prg_cfg(unsigned int type, struct tasdevice_priv *p) -{ - if ((type == MAIN_ALL_DEVICES) || (type == MAIN_DEVICE_A) || - (type == MAIN_DEVICE_B) || (type == MAIN_DEVICE_C) || - (type == MAIN_DEVICE_D)) - p->cur_prog = -1; - else - p->cur_conf = -1; -} - -/* Checksum for data bytes. */ -static int tasdev_bytes_chksum(struct tasdevice_priv *tas_priv, - struct tasdev_blk *block, unsigned char book, - unsigned char page, unsigned char reg, unsigned int len, - unsigned char val, unsigned char *crc_chksum) -{ - int ret; - - if (len > 1) - ret = tasdev_multibytes_chksum(tas_priv, book, page, reg, - len); - else - ret = do_singlereg_checksum(tas_priv, book, page, reg, val); - - if (ret > 0) { - *crc_chksum += ret; - goto end; - } - - if (ret != -EAGAIN) - goto end; - - block->nr_retry--; - if (block->nr_retry > 0) - goto end; - - set_err_prg_cfg(block->type, tas_priv); - -end: - return ret; -} - -/* Multi-data byte write. */ -static int tasdev_multibytes_wr(struct tasdevice_priv *tas_priv, - struct tasdev_blk *block, unsigned char book, - unsigned char page, unsigned char reg, unsigned char *data, - unsigned int len, unsigned int *nr_cmds, - unsigned char *crc_chksum) -{ - int ret; - - if (len > 1) { - ret = tasdevice_spi_dev_bulk_write(tas_priv, - TASDEVICE_REG(book, page, reg), data + 3, len); - if (ret < 0) - return ret; - if (block->is_ychksum_present) - ret = tasdev_bytes_chksum(tas_priv, block, - book, page, reg, len, 0, crc_chksum); - } else { - ret = tasdevice_spi_dev_write(tas_priv, - TASDEVICE_REG(book, page, reg), data[3]); - if (ret < 0) - return ret; - if (block->is_ychksum_present) - ret = tasdev_bytes_chksum(tas_priv, block, book, - page, reg, 1, data[3], crc_chksum); - } - - if (!block->is_ychksum_present || ret >= 0) { - *nr_cmds += 1; - if (len >= 2) - *nr_cmds += ((len - 2) / 4) + 1; - } - - return ret; -} - -/* Checksum for block. */ -static int tasdev_block_chksum(struct tasdevice_priv *tas_priv, - struct tasdev_blk *block) -{ - unsigned int nr_value; - int ret; - - ret = tasdevice_spi_dev_read(tas_priv, TASDEVICE_CHECKSUM, &nr_value); - if (ret < 0) { - dev_err(tas_priv->dev, "%s: read error %d.\n", __func__, ret); - set_err_prg_cfg(block->type, tas_priv); - return ret; - } - - if ((nr_value & 0xff) != block->pchksum) { - dev_err(tas_priv->dev, "%s: PChkSum err %d ", __func__, ret); - dev_err(tas_priv->dev, "PChkSum = 0x%x, Reg = 0x%x\n", - block->pchksum, (nr_value & 0xff)); - tas_priv->err_code |= ERROR_PRAM_CRCCHK; - ret = -EAGAIN; - block->nr_retry--; - - if (block->nr_retry <= 0) - set_err_prg_cfg(block->type, tas_priv); - } else { - tas_priv->err_code &= ~ERROR_PRAM_CRCCHK; - } - - return ret; -} - -/* Firmware block load function. */ -static int tasdev_load_blk(struct tasdevice_priv *tas_priv, - struct tasdev_blk *block) -{ - unsigned int sleep_time, len, nr_cmds; - unsigned char offset, book, page, val; - unsigned char *data = block->data; - unsigned char crc_chksum = 0; - int ret = 0; - - while (block->nr_retry > 0) { - if (block->is_pchksum_present) { - ret = tasdevice_spi_dev_write(tas_priv, - TASDEVICE_CHECKSUM, 0); - if (ret < 0) - break; - } - - if (block->is_ychksum_present) - crc_chksum = 0; - - nr_cmds = 0; - - while (nr_cmds < block->nr_cmds) { - data = block->data + nr_cmds * 4; - - book = data[0]; - page = data[1]; - offset = data[2]; - val = data[3]; - - nr_cmds++; - /* Single byte write */ - if (offset <= 0x7F) { - ret = tasdevice_spi_dev_write(tas_priv, - TASDEVICE_REG(book, page, offset), - val); - if (ret < 0) - break; - if (block->is_ychksum_present) { - ret = tasdev_bytes_chksum(tas_priv, - block, book, page, offset, - 1, val, &crc_chksum); - if (ret < 0) - break; - } - continue; - } - /* sleep command */ - if (offset == 0x81) { - /* book -- data[0] page -- data[1] */ - sleep_time = ((book << 8) + page)*1000; - fsleep(sleep_time); - continue; - } - /* Multiple bytes write */ - if (offset == 0x85) { - data += 4; - len = (book << 8) + page; - book = data[0]; - page = data[1]; - offset = data[2]; - ret = tasdev_multibytes_wr(tas_priv, - block, book, page, offset, data, - len, &nr_cmds, &crc_chksum); - if (ret < 0) - break; - } - } - if (ret == -EAGAIN) { - if (block->nr_retry > 0) - continue; - } else if (ret < 0) { - /* err in current device, skip it */ - break; - } - - if (block->is_pchksum_present) { - ret = tasdev_block_chksum(tas_priv, block); - if (ret == -EAGAIN) { - if (block->nr_retry > 0) - continue; - } else if (ret < 0) { - /* err in current device, skip it */ - break; - } - } - - if (block->is_ychksum_present) { - /* TBD, open it when FW ready */ - dev_err(tas_priv->dev, - "Blk YChkSum: FW = 0x%x, YCRC = 0x%x\n", - block->ychksum, crc_chksum); - - tas_priv->err_code &= - ~ERROR_YRAM_CRCCHK; - ret = 0; - } - /* skip current blk */ - break; - } - - return ret; -} - -/* Firmware block load function. */ -static int tasdevice_load_block(struct tasdevice_priv *tas_priv, - struct tasdev_blk *block) -{ - int ret = 0; - - block->nr_retry = 6; - if (tas_priv->is_loading == false) - return 0; - ret = tasdev_load_blk(tas_priv, block); - if (ret < 0) - dev_err(tas_priv->dev, "Blk (%d) load error\n", block->type); - - return ret; -} - -/* - * Select firmware binary parser & load callback functions by ppc3 version - * and firmware binary version. - */ -static int dspfw_default_callback(struct tasdevice_priv *tas_priv, - unsigned int drv_ver, unsigned int ppcver) -{ - int rc = 0; - - if (drv_ver == 0x100) { - if (ppcver >= PPC3_VERSION_BASE) { - tas_priv->fw_parse_variable_header = - fw_parse_variable_header_kernel; - tas_priv->fw_parse_program_data = - fw_parse_program_data_kernel; - tas_priv->fw_parse_configuration_data = - fw_parse_configuration_data_kernel; - tas_priv->tasdevice_load_block = - tasdevice_load_block_kernel; - } else if (ppcver == 0x00) { - tas_priv->fw_parse_variable_header = - fw_parse_variable_header_git; - tas_priv->fw_parse_program_data = - fw_parse_program_data; - tas_priv->fw_parse_configuration_data = - fw_parse_configuration_data; - tas_priv->tasdevice_load_block = - tasdevice_load_block; - } else { - dev_err(tas_priv->dev, - "Wrong PPCVer :0x%08x\n", ppcver); - rc = -EINVAL; - } - } else { - dev_err(tas_priv->dev, "Wrong DrvVer : 0x%02x\n", drv_ver); - rc = -EINVAL; - } - - return rc; -} - -/* DSP firmware binary file header parser function. */ -static int fw_parse_header(struct tasdevice_priv *tas_priv, - struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) -{ - struct tasdevice_dspfw_hdr *fw_hdr = &tas_fmw->fw_hdr; - struct tasdevice_fw_fixed_hdr *fw_fixed_hdr = &fw_hdr->fixed_hdr; - static const unsigned char magic_number[] = {0x35, 0x35, 0x35, 0x32, }; - const unsigned char *buf = (unsigned char *)fmw->data; - - if (offset + 92 > fmw->size) { - dev_err(tas_priv->dev, "%s: File Size error\n", __func__); - offset = -EINVAL; - goto out; - } - if (memcmp(&buf[offset], magic_number, 4)) { - dev_err(tas_priv->dev, "%s: Magic num NOT match\n", __func__); - offset = -EINVAL; - goto out; - } - offset += 4; - - /* - * Convert data[offset], data[offset + 1], data[offset + 2] and - * data[offset + 3] into host - */ - fw_fixed_hdr->fwsize = get_unaligned_be32(&buf[offset]); - offset += 4; - if (fw_fixed_hdr->fwsize != fmw->size) { - dev_err(tas_priv->dev, "File size not match, %lu %u", - (unsigned long)fmw->size, fw_fixed_hdr->fwsize); - offset = -EINVAL; - goto out; - } - offset += 4; - fw_fixed_hdr->ppcver = get_unaligned_be32(&buf[offset]); - offset += 8; - fw_fixed_hdr->drv_ver = get_unaligned_be32(&buf[offset]); - offset += 72; - -out: - return offset; -} - -/* DSP firmware binary file parser function. */ -static int tasdevice_dspfw_ready(const struct firmware *fmw, void *context) -{ - struct tasdevice_priv *tas_priv = context; - struct tasdevice_fw_fixed_hdr *fw_fixed_hdr; - struct tasdevice_fw *tas_fmw; - int offset = 0, ret = 0; - - if (!fmw || !fmw->data) { - dev_err(tas_priv->dev, "%s: Failed to read firmware %s\n", - __func__, tas_priv->coef_binaryname); - return -EINVAL; - } - - tas_priv->fmw = kzalloc(sizeof(*tas_priv->fmw), GFP_KERNEL); - if (!tas_priv->fmw) - return -ENOMEM; - tas_fmw = tas_priv->fmw; - tas_fmw->dev = tas_priv->dev; - offset = fw_parse_header(tas_priv, tas_fmw, fmw, offset); - - if (offset == -EINVAL) - return -EINVAL; - - fw_fixed_hdr = &tas_fmw->fw_hdr.fixed_hdr; - /* Support different versions of firmware */ - switch (fw_fixed_hdr->drv_ver) { - case 0x301: - case 0x302: - case 0x502: - case 0x503: - tas_priv->fw_parse_variable_header = - fw_parse_variable_header_kernel; - tas_priv->fw_parse_program_data = - fw_parse_program_data_kernel; - tas_priv->fw_parse_configuration_data = - fw_parse_configuration_data_kernel; - tas_priv->tasdevice_load_block = - tasdevice_load_block_kernel; - break; - case 0x202: - case 0x400: - tas_priv->fw_parse_variable_header = - fw_parse_variable_header_git; - tas_priv->fw_parse_program_data = - fw_parse_program_data; - tas_priv->fw_parse_configuration_data = - fw_parse_configuration_data; - tas_priv->tasdevice_load_block = - tasdevice_load_block; - break; - default: - ret = dspfw_default_callback(tas_priv, - fw_fixed_hdr->drv_ver, fw_fixed_hdr->ppcver); - if (ret) - return ret; - break; - } - - offset = tas_priv->fw_parse_variable_header(tas_priv, fmw, offset); - if (offset < 0) - return offset; - - offset = tas_priv->fw_parse_program_data(tas_priv, tas_fmw, fmw, - offset); - if (offset < 0) - return offset; - - offset = tas_priv->fw_parse_configuration_data(tas_priv, - tas_fmw, fmw, offset); - if (offset < 0) - ret = offset; - - return ret; -} - -/* DSP firmware binary file parser function. */ -int tasdevice_spi_dsp_parser(void *context) -{ - struct tasdevice_priv *tas_priv = context; - const struct firmware *fw_entry; - int ret; - - ret = request_firmware(&fw_entry, tas_priv->coef_binaryname, - tas_priv->dev); - if (ret) { - dev_err(tas_priv->dev, "%s: load %s error\n", __func__, - tas_priv->coef_binaryname); - return ret; - } - - ret = tasdevice_dspfw_ready(fw_entry, tas_priv); - release_firmware(fw_entry); - fw_entry = NULL; - - return ret; -} - -/* DSP firmware program block data remove function. */ -static void tasdev_dsp_prog_blk_remove(struct tasdevice_prog *prog) -{ - struct tasdevice_data *tas_dt; - struct tasdev_blk *blk; - unsigned int i; - - if (!prog) - return; - - tas_dt = &prog->dev_data; - - if (!tas_dt->dev_blks) - return; - - for (i = 0; i < tas_dt->nr_blk; i++) { - blk = &tas_dt->dev_blks[i]; - kfree(blk->data); - } - kfree(tas_dt->dev_blks); -} - -/* DSP firmware program block data remove function. */ -static void tasdev_dsp_prog_remove(struct tasdevice_prog *prog, - unsigned short nr) -{ - int i; - - for (i = 0; i < nr; i++) - tasdev_dsp_prog_blk_remove(&prog[i]); - kfree(prog); -} - -/* DSP firmware config block data remove function. */ -static void tasdev_dsp_cfg_blk_remove(struct tasdevice_config *cfg) -{ - struct tasdevice_data *tas_dt; - struct tasdev_blk *blk; - unsigned int i; - - if (cfg) { - tas_dt = &cfg->dev_data; - - if (!tas_dt->dev_blks) - return; - - for (i = 0; i < tas_dt->nr_blk; i++) { - blk = &tas_dt->dev_blks[i]; - kfree(blk->data); - } - kfree(tas_dt->dev_blks); - } -} - -/* DSP firmware config remove function. */ -static void tasdev_dsp_cfg_remove(struct tasdevice_config *config, - unsigned short nr) -{ - int i; - - for (i = 0; i < nr; i++) - tasdev_dsp_cfg_blk_remove(&config[i]); - kfree(config); -} - -/* DSP firmware remove function. */ -void tasdevice_spi_dsp_remove(void *context) -{ - struct tasdevice_priv *tas_dev = context; - - if (!tas_dev->fmw) - return; - - if (tas_dev->fmw->programs) - tasdev_dsp_prog_remove(tas_dev->fmw->programs, - tas_dev->fmw->nr_programs); - if (tas_dev->fmw->configs) - tasdev_dsp_cfg_remove(tas_dev->fmw->configs, - tas_dev->fmw->nr_configurations); - kfree(tas_dev->fmw); - tas_dev->fmw = NULL; -} - -/* DSP firmware calibration data remove function. */ -static void tas2781_clear_calfirmware(struct tasdevice_fw *tas_fmw) -{ - struct tasdevice_calibration *calibration; - struct tasdev_blk *block; - unsigned int blks; - int i; - - if (!tas_fmw->calibrations) - goto out; - - for (i = 0; i < tas_fmw->nr_calibrations; i++) { - calibration = &tas_fmw->calibrations[i]; - if (!calibration) - continue; - - if (!calibration->dev_data.dev_blks) - continue; - - for (blks = 0; blks < calibration->dev_data.nr_blk; blks++) { - block = &calibration->dev_data.dev_blks[blks]; - if (!block) - continue; - kfree(block->data); - } - kfree(calibration->dev_data.dev_blks); - } - kfree(tas_fmw->calibrations); -out: - kfree(tas_fmw); -} - -/* Calibration data from firmware remove function. */ -void tasdevice_spi_calbin_remove(void *context) -{ - struct tasdevice_priv *tas_priv = context; - - if (tas_priv->cali_data_fmw) { - tas2781_clear_calfirmware(tas_priv->cali_data_fmw); - tas_priv->cali_data_fmw = NULL; - } -} - -/* Configuration remove function. */ -void tasdevice_spi_config_info_remove(void *context) -{ - struct tasdevice_priv *tas_priv = context; - struct tasdevice_rca *rca = &tas_priv->rcabin; - struct tasdevice_config_info **ci = rca->cfg_info; - unsigned int i, j; - - if (!ci) - return; - for (i = 0; i < rca->ncfgs; i++) { - if (!ci[i]) - continue; - if (ci[i]->blk_data) { - for (j = 0; j < ci[i]->real_nblocks; j++) { - if (!ci[i]->blk_data[j]) - continue; - kfree(ci[i]->blk_data[j]->regdata); - kfree(ci[i]->blk_data[j]); - } - kfree(ci[i]->blk_data); - } - kfree(ci[i]); - } - kfree(ci); -} - -/* DSP firmware program block data load function. */ -static int tasdevice_load_data(struct tasdevice_priv *tas_priv, - struct tasdevice_data *dev_data) -{ - struct tasdev_blk *block; - unsigned int i; - int ret = 0; - - for (i = 0; i < dev_data->nr_blk; i++) { - block = &dev_data->dev_blks[i]; - ret = tas_priv->tasdevice_load_block(tas_priv, block); - if (ret < 0) - break; - } - - return ret; -} - -/* DSP firmware program load interface function. */ -int tasdevice_spi_prmg_load(void *context, int prm_no) -{ - struct tasdevice_priv *tas_priv = context; - struct tasdevice_fw *tas_fmw = tas_priv->fmw; - struct tasdevice_prog *program; - struct tasdevice_config *conf; - int ret = 0; - - if (!tas_fmw) { - dev_err(tas_priv->dev, "%s: Firmware is NULL\n", __func__); - return -EINVAL; - } - if (prm_no >= 0 && prm_no <= tas_fmw->nr_programs) { - tas_priv->cur_conf = 0; - tas_priv->is_loading = true; - program = &tas_fmw->programs[prm_no]; - ret = tasdevice_load_data(tas_priv, &program->dev_data); - if (ret < 0) { - dev_err(tas_priv->dev, "Program failed %d.\n", ret); - return ret; - } - tas_priv->cur_prog = prm_no; - - conf = &tas_fmw->configs[tas_priv->cur_conf]; - ret = tasdevice_load_data(tas_priv, &conf->dev_data); - if (ret < 0) - dev_err(tas_priv->dev, "Config failed %d.\n", ret); - } else { - dev_err(tas_priv->dev, - "%s: prm(%d) is not in range of Programs %u\n", - __func__, prm_no, tas_fmw->nr_programs); - return -EINVAL; - } - - return ret; -} - -/* RCABIN configuration switch interface function. */ -void tasdevice_spi_tuning_switch(void *context, int state) -{ - struct tasdevice_priv *tas_priv = context; - int profile_cfg_id = tas_priv->rcabin.profile_cfg_id; - - if (tas_priv->fw_state == TASDEVICE_DSP_FW_FAIL) { - dev_err(tas_priv->dev, "DSP bin file not loaded\n"); - return; - } - - if (state == 0) - tasdevice_spi_select_cfg_blk(tas_priv, profile_cfg_id, - TASDEVICE_BIN_BLK_PRE_POWER_UP); - else - tasdevice_spi_select_cfg_blk(tas_priv, profile_cfg_id, - TASDEVICE_BIN_BLK_PRE_SHUTDOWN); -} diff --git a/sound/soc/codecs/tas2781-comlib.c b/sound/soc/codecs/tas2781-comlib.c index 1e0b3aa95749..4df2edcfac40 100644 --- a/sound/soc/codecs/tas2781-comlib.c +++ b/sound/soc/codecs/tas2781-comlib.c @@ -21,8 +21,6 @@ #include <sound/soc.h> #include <sound/tas2781.h> -#define TASDEVICE_CRC8_POLYNOMIAL 0x4d - static const struct regmap_range_cfg tasdevice_ranges[] = { { .range_min = 0, @@ -122,7 +120,7 @@ int tasdevice_dev_read(struct tasdevice_priv *tas_priv, if (chn < tas_priv->ndev) { struct regmap *map = tas_priv->regmap; - ret = tasdevice_change_chn_book(tas_priv, chn, + ret = tas_priv->change_chn_book(tas_priv, chn, TASDEVICE_BOOK_ID(reg)); if (ret < 0) goto out; @@ -149,7 +147,7 @@ int tasdevice_dev_write(struct tasdevice_priv *tas_priv, if (chn < tas_priv->ndev) { struct regmap *map = tas_priv->regmap; - ret = tasdevice_change_chn_book(tas_priv, chn, + ret = tas_priv->change_chn_book(tas_priv, chn, TASDEVICE_BOOK_ID(reg)); if (ret < 0) goto out; @@ -179,7 +177,7 @@ int tasdevice_dev_bulk_write( if (chn < tas_priv->ndev) { struct regmap *map = tas_priv->regmap; - ret = tasdevice_change_chn_book(tas_priv, chn, + ret = tas_priv->change_chn_book(tas_priv, chn, TASDEVICE_BOOK_ID(reg)); if (ret < 0) goto out; @@ -208,7 +206,7 @@ int tasdevice_dev_bulk_read(struct tasdevice_priv *tas_priv, if (chn < tas_priv->ndev) { struct regmap *map = tas_priv->regmap; - ret = tasdevice_change_chn_book(tas_priv, chn, + ret = tas_priv->change_chn_book(tas_priv, chn, TASDEVICE_BOOK_ID(reg)); if (ret < 0) goto out; @@ -234,7 +232,7 @@ int tasdevice_dev_update_bits( if (chn < tas_priv->ndev) { struct regmap *map = tas_priv->regmap; - ret = tasdevice_change_chn_book(tas_priv, chn, + ret = tas_priv->change_chn_book(tas_priv, chn, TASDEVICE_BOOK_ID(reg)); if (ret < 0) goto out; @@ -340,6 +338,7 @@ int tasdevice_init(struct tasdevice_priv *tas_priv) tas_priv->cur_prog = -1; tas_priv->cur_conf = -1; + tas_priv->isspi = false; for (i = 0; i < tas_priv->ndev; i++) { tas_priv->tasdevice[i].cur_book = -1; @@ -347,6 +346,11 @@ int tasdevice_init(struct tasdevice_priv *tas_priv) tas_priv->tasdevice[i].cur_conf = -1; } + tas_priv->update_bits = tasdevice_dev_update_bits; + tas_priv->change_chn_book = tasdevice_change_chn_book; + tas_priv->dev_read = tasdevice_dev_read; + tas_priv->dev_bulk_read = tasdevice_dev_bulk_read; + mutex_init(&tas_priv->codec_lock); out: diff --git a/sound/soc/codecs/tas2781-fmwlib.c b/sound/soc/codecs/tas2781-fmwlib.c index 13a197468193..3dd76aff1b6e 100644 --- a/sound/soc/codecs/tas2781-fmwlib.c +++ b/sound/soc/codecs/tas2781-fmwlib.c @@ -803,8 +803,13 @@ static int tasdevice_process_block(void *context, unsigned char *data, chn = idx - 1; chnend = idx; } else { - chn = 0; - chnend = tas_priv->ndev; + if (tas_priv->isspi) { + chn = tas_priv->index; + chnend = chn + 1; + } else { + chn = 0; + chnend = tas_priv->ndev; + } } for (; chn < chnend; chn++) { @@ -896,7 +901,7 @@ static int tasdevice_process_block(void *context, unsigned char *data, is_err = true; break; } - rc = tasdevice_dev_update_bits(tas_priv, chn, + rc = tas_priv->update_bits(tas_priv, chn, TASDEVICE_REG(data[subblk_offset + 2], data[subblk_offset + 3], data[subblk_offset + 4]), @@ -1461,7 +1466,7 @@ static int tasdev_multibytes_chksum(struct tasdevice_priv *tasdevice, goto end; } - ret = tasdevice_dev_bulk_read(tasdevice, chn, + ret = tasdevice->dev_bulk_read(tasdevice, chn, TASDEVICE_REG(book, page, crc_data.offset), nBuf1, crc_data.len); if (ret < 0) @@ -1511,7 +1516,7 @@ static int do_singlereg_checksum(struct tasdevice_priv *tasdevice, in = check_yram(&crc_data, book, page, reg, 1); if (!in) goto end; - ret = tasdevice_dev_read(tasdevice, chl, + ret = tasdevice->dev_read(tasdevice, chl, TASDEVICE_REG(book, page, reg), &nData1); if (ret < 0) goto end; @@ -1615,7 +1620,7 @@ static int tasdev_block_chksum(struct tasdevice_priv *tas_priv, unsigned int nr_value; int ret; - ret = tasdevice_dev_read(tas_priv, chn, TASDEVICE_CHECKSUM_REG, + ret = tas_priv->dev_read(tas_priv, chn, TASDEVICE_CHECKSUM_REG, &nr_value); if (ret < 0) { dev_err(tas_priv->dev, "%s: Chn %d\n", __func__, chn); -- 2.43.0

3 2

SSL2+ MK II "ucm is not supported for this device"
by GitHub issues - opened 25 Apr '25

25 Apr '25

alsa-project/alsa-ucm-conf issue #555 was opened from ATRAhassis: " ALSA lib parser.c:244:(error_node) UCM is not supported for this USB device (Solid State Logic SSL 2+ Mk II at usb-0000:0b:00.1-6, high speed @ USB31e9:0009) ALSA lib main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -6 alsaucm: error failed to open sound card hw:0: No such device or address " i believe i just need to make a file for it but i am too new to understand exactly how. willing to help if i can get any direction. was told if a UCM can be made for this device that its helpful for all distros so i figured id make this issue ticket Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/555 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

DRAFT [for alsa-lib 1.2.15]: HDA: Handle better Bass speaker including 4 channel mode
by GitHub pull_request - edited 25 Apr '25

25 Apr '25

alsa-project/alsa-ucm-conf pull request #533 was edited from perexg: It's a follow up of #410 . Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/533 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/533.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

DRAFT [for alsa-lib 1.2.15] USB-Audio: Steinberg UR22C - fix capture channels for older firmware
by GitHub pull_request - edited 24 Apr '25

24 Apr '25

alsa-project/alsa-ucm-conf pull request #554 was edited from perexg: It seems that firmware version 3.20 added 4 capture channels while previous firmware has only 2 capture channels. Fixes: https://github.com/alsa-project/alsa-ucm-conf/issues/547 Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/554 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/554.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

USB-Audio: Steinberg UR22C - fix capture channels for older firmware
by GitHub pull_request - opened 24 Apr '25

24 Apr '25

alsa-project/alsa-ucm-conf pull request #554 was opened from perexg: It seems that firmware version 3.20 added 4 capture channels while previous firmware has only 2 capture channels. Fixes: https://github.com/alsa-project/alsa-ucm-conf/issues/547 Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/554 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/554.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

DRAFT [for alsa-lib-1.2.15]: USB-Audio: GoXLR: enable detection of beta firmware (25 channels)
by GitHub pull_request - edited 24 Apr '25

24 Apr '25

alsa-project/alsa-ucm-conf pull request #524 was edited from perexg: 'Syntax 8' is required (alsa-lib 1.2.14+) Fixes: 17f9b4f ("USB-Audio: GoXLR - fix the channel detection for mini, cleanups") Link: https://github.com/alsa-project/alsa-ucm-conf/issues/444 Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/524 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/524.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

GoXLR Mini (ALSA UCM error)
by GitHub issues - edited 24 Apr '25

24 Apr '25

alsa-project/alsa-ucm-conf issue #553 was edited from Crav07: The device seems to be functioning, but this error has came up after updating to Bazzite 42 from Bazzite 41. Here is the result after running "journalctl --user -u wireplumber --boot 0" Apr 24 10:52:12 fedora wireplumber[2409]: wp-internal-comp-loader: Loading profile 'main' Apr 24 10:52:12 fedora wireplumber[2409]: spa.alsa: Error in ALSA UCM profile for _ucm0003.hw:GoXLRMini,0 (HiFi: Line5: source> Apr 24 10:52:13 fedora wireplumber[2409]: spa.alsa: Errors in ALSA UCM profile for card GoXLRMini Apr 24 10:52:13 fedora wireplumber[2409]: spa.bluez5: BlueZ system service is not available Apr 24 11:30:31 fedora wireplumber[2409]: wp-event-dispatcher: <WpAsyncEventHook:0x557d66add4c0> failed: <WpSiStandardLink:0x5> (Edit: added results) Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/553 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

GoXLR Mini (ALSA UCM error)
by GitHub issues - opened 24 Apr '25

24 Apr '25

alsa-project/alsa-ucm-conf issue #553 was opened from Crav07: The device seems to be functioning, but this error has came up after updating to Bazzite 42 from Bazzite 41. Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/553 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

SSL2+ reports [ALSA UCM error] but seems to be working fine.
by GitHub issues - opened 24 Apr '25

24 Apr '25

alsa-project/alsa-ucm-conf issue #552 was opened from Steamvoker: Got redirected here from https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/4653 Don't want to just copy paste and issue here, but everything seems to be working fine, except that the device reports errors in KDE sound settings. Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/552 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Question about conversion kcontrol to component
by Kuninori Morimoto 24 Apr '25

24 Apr '25

Hi ALSA ML I have noticed that we have similar functions snd_soc_kcontrol_component() snd_soc_dapm_kcontrol_component() Both converts snd_kcontrol to snd_soc_component. I wonder can we merge these ? or which we can use is case-by-case ? Thank you for your help !! Best regards --- Kuninori Morimoto

1 0

Pioneer DJ DJM mixers channel names
by František Kučera 24 Apr '25

24 Apr '25

When working on DJM-V10, I noticed that other Pioneer mixers (like my older DJM-250MK2) have control names that do not comply with conventions described at <https://docs.kernel.org/sound/designs/control-names.html> and thus do not show in alsamixer under proper category (playback/capture) and they are all under playback. I am preparing a patch that will add "Playback Switch" or "Capture Switch" suffix to control names. But I am not sure about the prefix. Should it be "aux" or "PCM"? It is often the main function, so I tend rather to PCM than auxiliary... Could you give some advice regarding the mixer control names? Thanks, Franta

1 0

1.2.14: test suite build fails with `-Wincompatible-pointer-types` and `-Wold-style-definition` errors
by GitHub issues - opened 23 Apr '25

23 Apr '25

alsa-project/alsa-lib issue #452 was opened from kloczek: gcc 15.0.1 from fedora rawhide. <details> <summary>Test suite output</summary> ``` [tkloczko@pers-tkloczko alsa-lib-1.2.14]$ make check -k Making check in doc make[1]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/doc' Making check in pictures make[2]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/doc/pictures' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/doc/pictures' make[2]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/doc' make[2]: Nothing to be done for 'check-am'. make[2]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/doc' make[1]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/doc' Making check in include make[1]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/include' Making check in sound make[2]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/include/sound' Making check in uapi make[3]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/include/sound/uapi' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/include/sound/uapi' make[3]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/include/sound' make[3]: Nothing to be done for 'check-am'. make[3]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/include/sound' make[2]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/include/sound' make[2]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/include' if ! test -r alsa/local.h; then \ ln -s ../include alsa; \ fi for f in asoundlib.h version.h; do \ if ! test -r ../include/$f; then \ ln -s /home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/include/$f ../include/$f; \ fi; \ done make[2]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/include' make[1]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/include' Making check in src make[1]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/src' make check-recursive make[2]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/src' Making check in control make[3]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/src/control' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/src/control' Making check in mixer make[3]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/src/mixer' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/src/mixer' Making check in pcm make[3]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/src/pcm' make[4]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/src/pcm' make[4]: Nothing to be done for 'check-am'. make[4]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/src/pcm' make[3]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/src/pcm' Making check in timer make[3]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/src/timer' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/src/timer' Making check in rawmidi make[3]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/src/rawmidi' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/src/rawmidi' Making check in hwdep make[3]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/src/hwdep' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/src/hwdep' Making check in seq make[3]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/src/seq' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/src/seq' Making check in ucm make[3]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/src/ucm' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/src/ucm' Making check in conf make[3]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/src/conf' Making check in cards make[4]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/src/conf/cards' make[4]: Nothing to be done for 'check'. make[4]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/src/conf/cards' Making check in ctl make[4]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/src/conf/ctl' make[4]: Nothing to be done for 'check'. make[4]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/src/conf/ctl' Making check in pcm make[4]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/src/conf/pcm' make[4]: Nothing to be done for 'check'. make[4]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/src/conf/pcm' make[4]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/src/conf' make[4]: Nothing to be done for 'check-am'. make[4]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/src/conf' make[3]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/src/conf' make[3]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/src' make[3]: Nothing to be done for 'check-am'. make[3]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/src' make[2]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/src' make[1]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/src' Making check in src/topology make[1]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/src/topology' make[1]: Nothing to be done for 'check'. make[1]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/src/topology' Making check in modules make[1]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/modules' Making check in mixer make[2]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/modules/mixer' Making check in simple make[3]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/modules/mixer/simple' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/modules/mixer/simple' make[3]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/modules/mixer' make[3]: Nothing to be done for 'check-am'. make[3]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/modules/mixer' make[2]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/modules/mixer' make[2]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/modules' make[2]: Nothing to be done for 'check-am'. make[2]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/modules' make[1]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/modules' Making check in aserver make[1]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/aserver' make[1]: Nothing to be done for 'check'. make[1]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/aserver' Making check in test make[1]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/test' Making check in . make[2]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/test' make control pcm pcm_min latency seq seq-ump-example playmidi1 timer rawmidi midiloop umpinfo oldapi queue_timer namehint client_event_filter chmap audio_time user-ctl-element-set pcm-multi-thread make[3]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/test' make[3]: 'control' is up to date. make[3]: 'pcm' is up to date. make[3]: 'pcm_min' is up to date. make[3]: 'latency' is up to date. make[3]: 'seq' is up to date. make[3]: 'seq-ump-example' is up to date. CC playmidi1.o In file included from playmidi1.c:51: midifile.c: In function ‘readmt’: midifile.c:191:1: warning: old-style function definition [-Wold-style-definition] 191 | readmt (s) /* read through the "MThd" or "MTrk" header string */ | ^~~~~~ midifile.c: In function ‘readheader’: midifile.c:274:6: error: too many arguments to function ‘Mf_header’; expected 0, have 3 274 | (*Mf_header) (format, ntrks, division); | ~^~~~~~~~~~~ ~~~~~~ midifile.c: In function ‘readtrack’: midifile.c:437:11: error: too many arguments to function ‘chanmessage’; expected 0, have 3 437 | chanmessage (status, c1, (needed > 1) ? egetc () : 0); | ^~~~~~~~~~~ ~~~~~~ midifile.c:146:13: note: declared here 146 | static void chanmessage (); | ^~~~~~~~~~~ midifile.c:451:13: error: too many arguments to function ‘msgadd’; expected 0, have 1 451 | msgadd (egetc ()); | ^~~~~~ ~~~~~~~~ midifile.c:149:13: note: declared here 149 | static void msgadd (); | ^~~~~~ midifile.c:453:11: error: too many arguments to function ‘metaevent’; expected 0, have 1 453 | metaevent (type); | ^~~~~~~~~ ~~~~ midifile.c:144:13: note: declared here 144 | static void metaevent (); | ^~~~~~~~~ midifile.c:460:11: error: too many arguments to function ‘msgadd’; expected 0, have 1 460 | msgadd (0xf0); | ^~~~~~ ~~~~ midifile.c:149:13: note: declared here 149 | static void msgadd (); | ^~~~~~ midifile.c:463:13: error: too many arguments to function ‘msgadd’; expected 0, have 1 463 | msgadd (c = egetc ()); | ^~~~~~ ~~~~~~~~~~~~ midifile.c:149:13: note: declared here 149 | static void msgadd (); | ^~~~~~ midifile.c:479:13: error: too many arguments to function ‘msgadd’; expected 0, have 1 479 | msgadd (c = egetc ()); | ^~~~~~ ~~~~~~~~~~~~ midifile.c:149:13: note: declared here 149 | static void msgadd (); | ^~~~~~ midifile.c:484:18: error: too many arguments to function ‘Mf_arbitrary’; expected 0, have 2 484 | (*Mf_arbitrary) (msgleng (), msg ()); | ~^~~~~~~~~~~~~~ ~~~~~~~~~~ midifile.c:493:11: error: too many arguments to function ‘badbyte’; expected 0, have 1 493 | badbyte (c); | ^~~~~~~ ~ midifile.c:143:13: note: declared here 143 | static void badbyte (); | ^~~~~~~ midifile.c: In function ‘badbyte’: midifile.c:504:1: warning: old-style function definition [-Wold-style-definition] 504 | badbyte (c) | ^~~~~~~ midifile.c: At top level: midifile.c:515:1: error: conflicting types for ‘metaevent’; have ‘void(int)’ 515 | metaevent (int type) | ^~~~~~~~~ midifile.c:144:13: note: previous declaration of ‘metaevent’ with type ‘void(void)’ 144 | static void metaevent (); | ^~~~~~~~~ midifile.c: In function ‘metaevent’: midifile.c:524:23: error: too many arguments to function ‘to16bit’; expected 0, have 2 524 | (*Mf_seqnum) (to16bit (m[0], m[1])); | ^~~~~~~ ~~~~ midifile.c:139:12: note: declared here 139 | static int to16bit (); | ^~~~~~~ midifile.c:524:10: error: too many arguments to function ‘Mf_seqnum’; expected 0, have 1 524 | (*Mf_seqnum) (to16bit (m[0], m[1])); | ~^~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~ midifile.c:543:10: error: too many arguments to function ‘Mf_text’; expected 0, have 3 543 | (*Mf_text) (type, leng, m); | ~^~~~~~~~~ ~~~~ midifile.c:551:37: error: too many arguments to function ‘to32bit’; expected 0, have 4 551 | (*Mf_tempo) (Mf_currtempo = to32bit (0, m[0], m[1], m[2])); | ^~~~~~~ ~ midifile.c:137:13: note: declared here 137 | static long to32bit (); | ^~~~~~~ midifile.c:551:10: error: too many arguments to function ‘Mf_tempo’; expected 0, have 1 551 | (*Mf_tempo) (Mf_currtempo = to32bit (0, m[0], m[1], m[2])); | ~^~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ midifile.c:560:10: error: too many arguments to function ‘Mf_smpte’; expected 0, have 5 560 | (*Mf_smpte) (m[0], m[1], m[2], m[3], m[4]); | ~^~~~~~~~~~ ~~~~ midifile.c:564:10: error: too many arguments to function ‘Mf_timesig’; expected 0, have 4 564 | (*Mf_timesig) (m[0], m[1], m[2], m[3]); | ~^~~~~~~~~~~~ ~~~~ midifile.c:568:10: error: too many arguments to function ‘Mf_keysig’; expected 0, have 2 568 | (*Mf_keysig) (m[0], m[1]); | ~^~~~~~~~~~~ ~~~~ midifile.c:572:10: error: too many arguments to function ‘Mf_seqspecific’; expected 0, have 2 572 | (*Mf_seqspecific) (leng, m); | ~^~~~~~~~~~~~~~~~ ~~~~ midifile.c:576:10: error: too many arguments to function ‘Mf_metamisc’; expected 0, have 3 576 | (*Mf_metamisc) (type, leng, m); | ~^~~~~~~~~~~~~ ~~~~ midifile.c: In function ‘sysex’: midifile.c:585:6: error: too many arguments to function ‘Mf_sysex’; expected 0, have 2 585 | (*Mf_sysex) (msgleng (), msg ()); | ~^~~~~~~~~~ ~~~~~~~~~~ midifile.c: In function ‘chanmessage’: midifile.c:590:1: warning: old-style function definition [-Wold-style-definition] 590 | chanmessage (status, c1, c2) | ^~~~~~~~~~~ midifile.c:605:10: error: too many arguments to function ‘Mf_noteoff’; expected 0, have 3 605 | (*Mf_noteoff) (chan, c1, c2); | ~^~~~~~~~~~~~ ~~~~ midifile.c:609:10: error: too many arguments to function ‘Mf_noteon’; expected 0, have 3 609 | (*Mf_noteon) (chan, c1, c2); | ~^~~~~~~~~~~ ~~~~ midifile.c:613:10: error: too many arguments to function ‘Mf_pressure’; expected 0, have 3 613 | (*Mf_pressure) (chan, c1, c2); | ~^~~~~~~~~~~~~ ~~~~ midifile.c:617:10: error: too many arguments to function ‘Mf_parameter’; expected 0, have 3 617 | (*Mf_parameter) (chan, c1, c2); | ~^~~~~~~~~~~~~~ ~~~~ midifile.c:621:10: error: too many arguments to function ‘Mf_pitchbend’; expected 0, have 3 621 | (*Mf_pitchbend) (chan, c1, c2); | ~^~~~~~~~~~~~~~ ~~~~ midifile.c:625:10: error: too many arguments to function ‘Mf_program’; expected 0, have 2 625 | (*Mf_program) (chan, c1); | ~^~~~~~~~~~~~ ~~~~ midifile.c:629:10: error: too many arguments to function ‘Mf_chanpressure’; expected 0, have 2 629 | (*Mf_chanpressure) (chan, c1); | ~^~~~~~~~~~~~~~~~~ ~~~~ midifile.c: At top level: midifile.c:659:1: error: conflicting types for ‘to32bit’; have ‘long int(int, int, int, int)’ 659 | to32bit (int c1, int c2, int c3, int c4) | ^~~~~~~ midifile.c:137:13: note: previous declaration of ‘to32bit’ with type ‘long int(void)’ 137 | static long to32bit (); | ^~~~~~~ midifile.c: In function ‘to16bit’: midifile.c:671:1: warning: old-style function definition [-Wold-style-definition] 671 | to16bit (c1, c2) | ^~~~~~~ midifile.c: In function ‘read16bit’: midifile.c:695:10: error: too many arguments to function ‘to16bit’; expected 0, have 2 695 | return to16bit (c1, c2); | ^~~~~~~ ~~ midifile.c:671:1: note: declared here 671 | to16bit (c1, c2) | ^~~~~~~ midifile.c: In function ‘mferror’: midifile.c:700:1: warning: old-style function definition [-Wold-style-definition] 700 | mferror (s) | ^~~~~~~ midifile.c:704:6: error: too many arguments to function ‘Mf_error’; expected 0, have 1 704 | (*Mf_error) (s); | ~^~~~~~~~~~ ~ midifile.c: In function ‘msgadd’: midifile.c:739:1: warning: old-style function definition [-Wold-style-definition] 739 | msgadd (c) | ^~~~~~ midifile.c: In function ‘mfwrite’: midifile.c:808:1: warning: old-style function definition [-Wold-style-definition] 808 | mfwrite (format, ntracks, division, fp) | ^~~~~~~ midifile.c:811:1: error: number of arguments doesn’t match prototype 811 | { | ^ In file included from midifile.c:53: midifile.h:42:13: error: prototype declaration 42 | extern void mfwrite(); | ^~~~~~~ midifile.c:824:3: error: too many arguments to function ‘mf_write_header_chunk’; expected 0, have 3 824 | mf_write_header_chunk (format, ntracks, division); | ^~~~~~~~~~~~~~~~~~~~~ ~~~~~~ midifile.c:813:33: note: declared here 813 | void mf_write_track_chunk (), mf_write_header_chunk (); | ^~~~~~~~~~~~~~~~~~~~~ midifile.c:836:5: error: too many arguments to function ‘mf_write_track_chunk’; expected 0, have 2 836 | mf_write_track_chunk (i, fp); | ^~~~~~~~~~~~~~~~~~~~ ~ midifile.c:813:8: note: declared here 813 | void mf_write_track_chunk (), mf_write_header_chunk (); | ^~~~~~~~~~~~~~~~~~~~ midifile.c: In function ‘mf_write_track_chunk’: midifile.c:813:8: warning: old-style function definition [-Wold-style-definition] midifile.c:843:1: error: number of arguments doesn’t match prototype 843 | { | ^ midifile.c:813:8: error: prototype declaration 813 | void mf_write_track_chunk (), mf_write_header_chunk (); | ^~~~~~~~~~~~~~~~~~~~ midifile.c:863:3: error: too many arguments to function ‘write32bit’; expected 0, have 1 863 | write32bit (trkhdr); | ^~~~~~~~~~ ~~~~~~ midifile.c:846:23: note: declared here 846 | void write16bit (), write32bit (); | ^~~~~~~~~~ midifile.c:864:3: error: too many arguments to function ‘write32bit’; expected 0, have 1 864 | write32bit (trklength); | ^~~~~~~~~~ ~~~~~~~~~ midifile.c:846:23: note: declared here 846 | void write16bit (), write32bit (); | ^~~~~~~~~~ midifile.c:870:8: error: too many arguments to function ‘Mf_writetrack’; expected 0, have 1 870 | (*Mf_writetrack) (which_track); | ~^~~~~~~~~~~~~~~ ~~~~~~~~~~~ midifile.c:905:3: error: too many arguments to function ‘write32bit’; expected 0, have 1 905 | write32bit (trkhdr); | ^~~~~~~~~~ ~~~~~~ midifile.c:846:23: note: declared here 846 | void write16bit (), write32bit (); | ^~~~~~~~~~ midifile.c:906:3: error: too many arguments to function ‘write32bit’; expected 0, have 1 906 | write32bit (trklength); | ^~~~~~~~~~ ~~~~~~~~~ midifile.c:846:23: note: declared here 846 | void write16bit (), write32bit (); | ^~~~~~~~~~ midifile.c: In function ‘mf_write_header_chunk’: midifile.c:813:33: warning: old-style function definition [-Wold-style-definition] 813 | void mf_write_track_chunk (), mf_write_header_chunk (); | ^~~~~~~~~~~~~~~~~~~~~ midifile.c:915:1: error: number of arguments doesn’t match prototype 915 | { | ^ midifile.c:813:33: error: prototype declaration 813 | void mf_write_track_chunk (), mf_write_header_chunk (); | ^~~~~~~~~~~~~~~~~~~~~ midifile.c:924:3: error: too many arguments to function ‘write32bit’; expected 0, have 1 924 | write32bit (ident); | ^~~~~~~~~~ ~~~~~ midifile.c:917:23: note: declared here 917 | void write16bit (), write32bit (); | ^~~~~~~~~~ midifile.c:925:3: error: too many arguments to function ‘write32bit’; expected 0, have 1 925 | write32bit (length); | ^~~~~~~~~~ ~~~~~~ midifile.c:917:23: note: declared here 917 | void write16bit (), write32bit (); | ^~~~~~~~~~ midifile.c:926:3: error: too many arguments to function ‘write16bit’; expected 0, have 1 926 | write16bit (format); | ^~~~~~~~~~ ~~~~~~ midifile.c:917:8: note: declared here 917 | void write16bit (), write32bit (); | ^~~~~~~~~~ midifile.c:927:3: error: too many arguments to function ‘write16bit’; expected 0, have 1 927 | write16bit (ntracks); | ^~~~~~~~~~ ~~~~~~~ midifile.c:917:8: note: declared here 917 | void write16bit (), write32bit (); | ^~~~~~~~~~ midifile.c:928:3: error: too many arguments to function ‘write16bit’; expected 0, have 1 928 | write16bit (division); | ^~~~~~~~~~ ~~~~~~~~ midifile.c:917:8: note: declared here 917 | void write16bit (), write32bit (); | ^~~~~~~~~~ midifile.c: In function ‘mf_write_midi_event’: midifile.c:951:1: warning: old-style function definition [-Wold-style-definition] 951 | mf_write_midi_event (delta_time, type, chan, data, size) | ^~~~~~~~~~~~~~~~~~~ midifile.c:960:3: error: too many arguments to function ‘WriteVarLen’; expected 0, have 1 960 | WriteVarLen (delta_time); | ^~~~~~~~~~~ ~~~~~~~~~~ midifile.c:157:6: note: declared here 157 | void WriteVarLen (); | ^~~~~~~~~~~ midifile.c:976:5: error: too many arguments to function ‘eputc’; expected 0, have 1 976 | eputc (laststatus = c); | ^~~~~ ~~~~~~~~~~~~~~ midifile.c:151:12: note: declared here 151 | static int eputc (); | ^~~~~ midifile.c:979:5: error: too many arguments to function ‘WriteVarLen’; expected 0, have 1 979 | WriteVarLen (size); | ^~~~~~~~~~~ ~~~~ midifile.c:157:6: note: declared here 157 | void WriteVarLen (); | ^~~~~~~~~~~ midifile.c:983:5: error: too many arguments to function ‘eputc’; expected 0, have 1 983 | eputc (data[i]); | ^~~~~ ~~~~~~~ midifile.c:151:12: note: declared here 151 | static int eputc (); | ^~~~~ midifile.c: In function ‘mf_write_meta_event’: midifile.c:1003:1: warning: old-style function definition [-Wold-style-definition] 1003 | mf_write_meta_event (delta_time, type, data, size) | ^~~~~~~~~~~~~~~~~~~ midifile.c:1007:1: error: number of arguments doesn’t match prototype 1007 | { | ^ midifile.c:154:5: error: prototype declaration 154 | int mf_write_meta_event (); | ^~~~~~~~~~~~~~~~~~~ midifile.c:1010:3: error: too many arguments to function ‘WriteVarLen’; expected 0, have 1 1010 | WriteVarLen (delta_time); | ^~~~~~~~~~~ ~~~~~~~~~~ midifile.c:157:6: note: declared here 157 | void WriteVarLen (); | ^~~~~~~~~~~ midifile.c:1013:3: error: too many arguments to function ‘eputc’; expected 0, have 1 1013 | eputc (laststatus = meta_event); | ^~~~~ midifile.c:151:12: note: declared here 151 | static int eputc (); | ^~~~~ midifile.c:1016:3: error: too many arguments to function ‘eputc’; expected 0, have 1 1016 | eputc (type); | ^~~~~ ~~~~ midifile.c:151:12: note: declared here 151 | static int eputc (); | ^~~~~ midifile.c:1019:3: error: too many arguments to function ‘WriteVarLen’; expected 0, have 1 1019 | WriteVarLen (size); | ^~~~~~~~~~~ ~~~~ midifile.c:157:6: note: declared here 157 | void WriteVarLen (); | ^~~~~~~~~~~ midifile.c:1023:11: error: too many arguments to function ‘eputc’; expected 0, have 1 1023 | if (eputc (data[i]) != data[i]) | ^~~~~ ~~~~~~~ midifile.c:151:12: note: declared here 151 | static int eputc (); | ^~~~~ midifile.c: In function ‘mf_write_tempo’: midifile.c:1030:1: warning: old-style function definition [-Wold-style-definition] 1030 | mf_write_tempo (delta_time, tempo) | ^~~~~~~~~~~~~~ midifile.c:1033:1: error: number of arguments doesn’t match prototype 1033 | { | ^ midifile.c:155:6: error: prototype declaration 155 | void mf_write_tempo (); | ^~~~~~~~~~~~~~ midifile.c:1038:3: error: too many arguments to function ‘WriteVarLen’; expected 0, have 1 1038 | WriteVarLen (delta_time); | ^~~~~~~~~~~ ~~~~~~~~~~ midifile.c:157:6: note: declared here 157 | void WriteVarLen (); | ^~~~~~~~~~~ midifile.c:1039:3: error: too many arguments to function ‘eputc’; expected 0, have 1 1039 | eputc (laststatus = meta_event); | ^~~~~ midifile.c:151:12: note: declared here 151 | static int eputc (); | ^~~~~ midifile.c:1040:3: error: too many arguments to function ‘eputc’; expected 0, have 1 1040 | eputc (set_tempo); | ^~~~~ midifile.c:151:12: note: declared here 151 | static int eputc (); | ^~~~~ midifile.c:1042:3: error: too many arguments to function ‘eputc’; expected 0, have 1 1042 | eputc (3); | ^~~~~ ~ midifile.c:151:12: note: declared here 151 | static int eputc (); | ^~~~~ midifile.c:1043:3: error: too many arguments to function ‘eputc’; expected 0, have 1 1043 | eputc ((unsigned) (0xff & (tempo >> 16))); | ^~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ midifile.c:151:12: note: declared here 151 | static int eputc (); | ^~~~~ midifile.c:1044:3: error: too many arguments to function ‘eputc’; expected 0, have 1 1044 | eputc ((unsigned) (0xff & (tempo >> 8))); | ^~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ midifile.c:151:12: note: declared here 151 | static int eputc (); | ^~~~~ midifile.c:1045:3: error: too many arguments to function ‘eputc’; expected 0, have 1 1045 | eputc ((unsigned) (0xff & tempo)); | ^~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~ midifile.c:151:12: note: declared here 151 | static int eputc (); | ^~~~~ midifile.c: In function ‘mf_write_seqnum’: midifile.c:1049:1: warning: old-style function definition [-Wold-style-definition] 1049 | mf_write_seqnum (delta_time, seqnum) | ^~~~~~~~~~~~~~~ midifile.c:1052:1: error: number of arguments doesn’t match prototype 1052 | { | ^ midifile.c:156:6: error: prototype declaration 156 | void mf_write_seqnum (); | ^~~~~~~~~~~~~~~ midifile.c:1054:3: error: too many arguments to function ‘WriteVarLen’; expected 0, have 1 1054 | WriteVarLen (delta_time); | ^~~~~~~~~~~ ~~~~~~~~~~ midifile.c:157:6: note: declared here 157 | void WriteVarLen (); | ^~~~~~~~~~~ midifile.c:1055:3: error: too many arguments to function ‘eputc’; expected 0, have 1 1055 | eputc (laststatus = meta_event); | ^~~~~ midifile.c:151:12: note: declared here 151 | static int eputc (); | ^~~~~ midifile.c:1056:3: error: too many arguments to function ‘eputc’; expected 0, have 1 1056 | eputc (0); | ^~~~~ ~ midifile.c:151:12: note: declared here 151 | static int eputc (); | ^~~~~ midifile.c:1058:3: error: too many arguments to function ‘eputc’; expected 0, have 1 1058 | eputc ((unsigned) (0xff & (seqnum >> 8))); | ^~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ midifile.c:151:12: note: declared here 151 | static int eputc (); | ^~~~~ midifile.c:1059:3: error: too many arguments to function ‘eputc’; expected 0, have 1 1059 | eputc ((unsigned) (0xff & seqnum)); | ^~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~ midifile.c:151:12: note: declared here 151 | static int eputc (); | ^~~~~ midifile.c: In function ‘mf_sec2ticks’: midifile.c:1063:1: warning: old-style function definition [-Wold-style-definition] 1063 | mf_sec2ticks (secs, division, tempo) | ^~~~~~~~~~~~ midifile.c:1067:1: error: number of arguments doesn’t match prototype 1067 | { | ^ midifile.h:41:22: error: prototype declaration 41 | extern unsigned long mf_sec2ticks(); | ^~~~~~~~~~~~ midifile.c: In function ‘WriteVarLen’: midifile.c:1075:1: warning: old-style function definition [-Wold-style-definition] 1075 | WriteVarLen (value) | ^~~~~~~~~~~ midifile.c:1077:1: error: number of arguments doesn’t match prototype 1077 | { | ^ midifile.c:157:6: error: prototype declaration 157 | void WriteVarLen (); | ^~~~~~~~~~~ midifile.c:1089:7: error: too many arguments to function ‘eputc’; expected 0, have 1 1089 | eputc ((unsigned) (buffer & 0xff)); | ^~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~ midifile.c:151:12: note: declared here 151 | static int eputc (); | ^~~~~ midifile.c: In function ‘mf_ticks2sec’: midifile.c:1105:1: warning: old-style function definition [-Wold-style-definition] 1105 | mf_ticks2sec (ticks, division, tempo) | ^~~~~~~~~~~~ midifile.c: In function ‘write32bit’: midifile.c:917:23: warning: old-style function definition [-Wold-style-definition] 917 | void write16bit (), write32bit (); | ^~~~~~~~~~ midifile.c:1138:1: error: number of arguments doesn’t match prototype 1138 | { | ^ midifile.c:917:23: error: prototype declaration 917 | void write16bit (), write32bit (); | ^~~~~~~~~~ midifile.c:1139:3: error: too many arguments to function ‘eputc’; expected 0, have 1 1139 | eputc ((unsigned) ((data >> 24) & 0xff)); | ^~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ midifile.c:151:12: note: declared here 151 | static int eputc (); | ^~~~~ midifile.c:1140:3: error: too many arguments to function ‘eputc’; expected 0, have 1 1140 | eputc ((unsigned) ((data >> 16) & 0xff)); | ^~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ midifile.c:151:12: note: declared here 151 | static int eputc (); | ^~~~~ midifile.c:1141:3: error: too many arguments to function ‘eputc’; expected 0, have 1 1141 | eputc ((unsigned) ((data >> 8) & 0xff)); | ^~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ midifile.c:151:12: note: declared here 151 | static int eputc (); | ^~~~~ midifile.c:1142:3: error: too many arguments to function ‘eputc’; expected 0, have 1 1142 | eputc ((unsigned) (data & 0xff)); | ^~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~ midifile.c:151:12: note: declared here 151 | static int eputc (); | ^~~~~ midifile.c: In function ‘write16bit’: midifile.c:917:8: warning: old-style function definition [-Wold-style-definition] 917 | void write16bit (), write32bit (); | ^~~~~~~~~~ midifile.c:1148:1: error: number of arguments doesn’t match prototype 1148 | { | ^ midifile.c:917:8: error: prototype declaration 917 | void write16bit (), write32bit (); | ^~~~~~~~~~ midifile.c:1149:3: error: too many arguments to function ‘eputc’; expected 0, have 1 1149 | eputc ((unsigned) ((data & 0xff00) >> 8)); | ^~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ midifile.c:151:12: note: declared here 151 | static int eputc (); | ^~~~~ midifile.c:1150:3: error: too many arguments to function ‘eputc’; expected 0, have 1 1150 | eputc ((unsigned) (data & 0xff)); | ^~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~ midifile.c:151:12: note: declared here 151 | static int eputc (); | ^~~~~ midifile.c: In function ‘eputc’: midifile.c:1155:1: warning: old-style function definition [-Wold-style-definition] 1155 | eputc (c) | ^~~~~ midifile.c:1166:17: error: too many arguments to function ‘Mf_putc’; expected 0, have 1 1166 | return_val = (*Mf_putc) (c); | ~^~~~~~~~~ ~ playmidi1.c: In function ‘main’: playmidi1.c:591:19: error: assignment to ‘void (*)(void)’ from incompatible pointer type ‘void (*)(int, int, int)’ [-Wincompatible-pointer-types] 591 | Mf_header = do_header; | ^ playmidi1.c:151:13: note: ‘do_header’ declared here 151 | static void do_header(int format, int ntracks, int division) | ^~~~~~~~~ playmidi1.c:592:18: error: assignment to ‘void (*)(void)’ from incompatible pointer type ‘void (*)(int)’ [-Wincompatible-pointer-types] 592 | Mf_tempo = do_tempo; | ^ playmidi1.c:246:13: note: ‘do_tempo’ declared here 246 | static void do_tempo(int us) | ^~~~~~~~ playmidi1.c:594:17: error: assignment to ‘void (*)(void)’ from incompatible pointer type ‘void (*)(int, int, char *)’ [-Wincompatible-pointer-types] 594 | Mf_text = mytext; | ^ playmidi1.c:139:13: note: ‘mytext’ declared here 139 | static void mytext(int type ATTRIBUTE_UNUSED, int leng, char *msg) | ^~~~~~ playmidi1.c:596:19: error: assignment to ‘void (*)(void)’ from incompatible pointer type ‘void (*)(int, int, int)’ [-Wincompatible-pointer-types] 596 | Mf_noteon = do_noteon; | ^ playmidi1.c:266:13: note: ‘do_noteon’ declared here 266 | static void do_noteon(int chan, int pitch, int vol) | ^~~~~~~~~ playmidi1.c:597:20: error: assignment to ‘void (*)(void)’ from incompatible pointer type ‘void (*)(int, int, int)’ [-Wincompatible-pointer-types] 597 | Mf_noteoff = do_noteoff; | ^ playmidi1.c:278:13: note: ‘do_noteoff’ declared here 278 | static void do_noteoff(int chan, int pitch, int vol) | ^~~~~~~~~~ playmidi1.c:598:20: error: assignment to ‘void (*)(void)’ from incompatible pointer type ‘void (*)(int, int)’ [-Wincompatible-pointer-types] 598 | Mf_program = do_program; | ^ playmidi1.c:290:13: note: ‘do_program’ declared here 290 | static void do_program(int chan, int program) | ^~~~~~~~~~ playmidi1.c:599:22: error: assignment to ‘void (*)(void)’ from incompatible pointer type ‘void (*)(int, int, int)’ [-Wincompatible-pointer-types] 599 | Mf_parameter = do_parameter; | ^ playmidi1.c:302:13: note: ‘do_parameter’ declared here 302 | static void do_parameter(int chan, int control, int value) | ^~~~~~~~~~~~ playmidi1.c:600:22: error: assignment to ‘void (*)(void)’ from incompatible pointer type ‘void (*)(int, int, int)’ [-Wincompatible-pointer-types] 600 | Mf_pitchbend = do_pitchbend; | ^ playmidi1.c:314:13: note: ‘do_pitchbend’ declared here 314 | static void do_pitchbend(int chan, int lsb, int msb) | ^~~~~~~~~~~~ playmidi1.c:601:21: error: assignment to ‘void (*)(void)’ from incompatible pointer type ‘void (*)(int, int, int)’ [-Wincompatible-pointer-types] 601 | Mf_pressure = do_pressure; | ^ playmidi1.c:325:13: note: ‘do_pressure’ declared here 325 | static void do_pressure(int chan, int pitch, int pressure) | ^~~~~~~~~~~ playmidi1.c:602:25: error: assignment to ‘void (*)(void)’ from incompatible pointer type ‘void (*)(int, int)’ [-Wincompatible-pointer-types] 602 | Mf_chanpressure = do_chanpressure; | ^ playmidi1.c:336:13: note: ‘do_chanpressure’ declared here 336 | static void do_chanpressure(int chan, int pressure) | ^~~~~~~~~~~~~~~ playmidi1.c:603:18: error: assignment to ‘void (*)(void)’ from incompatible pointer type ‘void (*)(int, char *)’ [-Wincompatible-pointer-types] 603 | Mf_sysex = do_sysex; | ^ playmidi1.c:347:13: note: ‘do_sysex’ declared here 347 | static void do_sysex(int len, char *msg) | ^~~~~~~~ midifile.c: At top level: midifile.c:137:13: warning: ‘to32bit’ used but never defined 137 | static long to32bit (); | ^~~~~~~ midifile.c:144:13: warning: ‘metaevent’ used but never defined 144 | static void metaevent (); | ^~~~~~~~~ midifile.c:515:1: warning: ‘metaevent’ defined but not used [-Wunused-function] 515 | metaevent (int type) | ^~~~~~~~~ make[3]: *** [Makefile:626: playmidi1.o] Error 1 make[3]: Target 'playmidi1' not remade because of errors. make[3]: 'timer' is up to date. make[3]: 'rawmidi' is up to date. make[3]: 'midiloop' is up to date. make[3]: 'umpinfo' is up to date. make[3]: 'oldapi' is up to date. make[3]: 'queue_timer' is up to date. make[3]: 'namehint' is up to date. make[3]: 'client_event_filter' is up to date. make[3]: 'chmap' is up to date. make[3]: 'audio_time' is up to date. make[3]: 'user-ctl-element-set' is up to date. make[3]: 'pcm-multi-thread' is up to date. make[3]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/test' make[2]: *** [Makefile:819: check-am] Error 2 make[2]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/test' Making check in lsb make[2]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/test/lsb' make config midi_event make[3]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/test/lsb' make[3]: 'config' is up to date. make[3]: 'midi_event' is up to date. make[3]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/test/lsb' make check-TESTS make[3]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/test/lsb' make[4]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/test/lsb' PASS: config PASS: midi_event ============================================================================ Testsuite summary for alsa-lib 1.2.14 ============================================================================ # TOTAL: 2 # PASS: 2 # SKIP: 0 # XFAIL: 0 # FAIL: 0 # XPASS: 0 # ERROR: 0 ============================================================================ make[4]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/test/lsb' make[3]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/test/lsb' make[2]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/test/lsb' make[1]: *** [Makefile:669: check-recursive] Error 1 make[1]: Target 'check' not remade because of errors. make[1]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/test' Making check in utils make[1]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/utils' make[1]: Nothing to be done for 'check'. make[1]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14/utils' make[1]: Entering directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14' make[1]: Nothing to be done for 'check-am'. make[1]: Leaving directory '/home/tkloczko/rpmbuild/BUILD/alsa-lib-1.2.14' make: *** [Makefile:412: check-recursive] Error 1 make: Target 'check' not remade because of errors. ``` </details> Issue URL : https://github.com/alsa-project/alsa-lib/issues/452 Repository URL: https://github.com/alsa-project/alsa-lib

1 0

[PATCH v2 0/5] Add DisplayPort sound support for Fairphone 5 smartphone
by Luca Weiss 23 Apr '25

23 Apr '25

Add the necessary sound card bits and some dts additions to enable sound over DisplayPort-over-USB-C, e.g. to a connected TV or monitor. The UCM files can be found here: https://gitlab.postmarketos.org/postmarketOS/pmaports/-/tree/master/device/… This series - in spirit - depends on the series enabling DisplayPort in the first place, but can land pretty independently, especially the ASoC bits: https://lore.kernel.org/linux-arm-msm/20250312-fp5-pmic-glink-dp-v2-0-a5592… Signed-off-by: Luca Weiss <luca.weiss(a)fairphone.com> --- Changes in v2: - Revamp series based on comments on v1, doesn't have much too much in common anymore - Use sm8250 instead of sc8280xp sndcard file, so port other required changes from sc8280xp.c to sm8250.c - This also changes the sound card compatible to from qcom,qcm6490-sndcard to fairphone,fp5-sndcard - Link to v1: https://lore.kernel.org/r/20240809-fp5-dp-sound-v1-0-d7ba2c24f6b9@fairphone… --- Luca Weiss (5): ASoC: dt-bindings: qcom,sm8250: Add Fairphone 5 sound card ASoC: qcom: sm8250: set card driver name from match data ASoC: qcom: sm8250: add DisplayPort Jack support ASoC: qcom: sm8250: Add Fairphone 5 soundcard compatible arm64: dts: qcom: qcm6490-fairphone-fp5: Add DisplayPort sound support .../devicetree/bindings/sound/qcom,sm8250.yaml | 1 + arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts | 31 ++++++++++++++++++++++ sound/soc/qcom/sm8250.c | 28 +++++++++++-------- 3 files changed, 49 insertions(+), 11 deletions(-) --- base-commit: 7f1dd4e6634d085f3c9652d4e0f1903659fb96f9 change-id: 20240809-fp5-dp-sound-b3768f3019bd Best regards, -- Luca Weiss <luca.weiss(a)fairphone.com>

4 12

[PATCH] ALSA: usb-audio: Add Pioneer DJ DJM-V10 support
by František Kučera 22 Apr '25

22 Apr '25

From: František Kučera <franta-linux(a)frantovo.cz> Pioneer DJ DJM-V10 is a high end mixer that acts like a USB sound card. The MIDI controller part is standard but the PCM part is "vendor specific". Input and output is enabled by this patch: - 12 channels (6 stereo) in each direction - 44 100 / 48 000 / 96 000 Hz - S24_3LE Capture channels can be configured through alsamixer. Playback channels are fixed and controlled by hardware knobs on the mixer. Signed-off-by: František Kučera <franta-linux(a)frantovo.cz> --- sound/usb/mixer_quirks.c | 62 ++++++++++++++++++++++++++++++++++++++-- sound/usb/quirks-table.h | 51 +++++++++++++++++++++++++++++++++ sound/usb/quirks.c | 1 + 3 files changed, 111 insertions(+), 3 deletions(-) diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c index a90673d43822..01091c3a83fc 100644 --- a/sound/usb/mixer_quirks.c +++ b/sound/usb/mixer_quirks.c @@ -3525,10 +3525,13 @@ static int snd_rme_digiface_controls_create(struct usb_mixer_interface *mixer) #define SND_DJM_CAP_RECOUT 0x0a #define SND_DJM_CAP_RECOUT_NOMIC 0x0e #define SND_DJM_CAP_NONE 0x0f +#define SND_DJM_CAP_FXSEND 0x10 #define SND_DJM_CAP_CH1PFADER 0x11 #define SND_DJM_CAP_CH2PFADER 0x12 #define SND_DJM_CAP_CH3PFADER 0x13 #define SND_DJM_CAP_CH4PFADER 0x14 +#define SND_DJM_CAP_EXT1SEND 0x21 +#define SND_DJM_CAP_EXT2SEND 0x22 #define SND_DJM_CAP_CH1PREFADER 0x31 #define SND_DJM_CAP_CH2PREFADER 0x32 #define SND_DJM_CAP_CH3PREFADER 0x33 @@ -3559,6 +3562,7 @@ static int snd_rme_digiface_controls_create(struct usb_mixer_interface *mixer) #define SND_DJM_750MK2_IDX 0x4 #define SND_DJM_450_IDX 0x5 #define SND_DJM_A9_IDX 0x6 +#define SND_DJM_V10_IDX 0x7 #define SND_DJM_CTL(_name, suffix, _default_value, _windex) { \ @@ -3598,8 +3602,8 @@ static const char *snd_djm_get_label_caplevel_common(u16 wvalue) } }; -// The DJM-A9 has different capture levels than other, older models -static const char *snd_djm_get_label_caplevel_a9(u16 wvalue) +// Models like DJM-A9 or DJM-V10 have different capture levels than others +static const char *snd_djm_get_label_caplevel_high(u16 wvalue) { switch (wvalue) { case 0x0000: return "+15dB"; @@ -3627,6 +3631,7 @@ static const char *snd_djm_get_label_cap_common(u16 wvalue) case SND_DJM_CAP_RECOUT_NOMIC: return "Rec Out without Mic"; case SND_DJM_CAP_AUX: return "Aux"; case SND_DJM_CAP_NONE: return "None"; + case SND_DJM_CAP_FXSEND: return "FX SEND"; case SND_DJM_CAP_CH1PREFADER: return "Pre Fader Ch1"; case SND_DJM_CAP_CH2PREFADER: return "Pre Fader Ch2"; case SND_DJM_CAP_CH3PREFADER: return "Pre Fader Ch3"; @@ -3635,6 +3640,8 @@ static const char *snd_djm_get_label_cap_common(u16 wvalue) case SND_DJM_CAP_CH2PFADER: return "Post Fader Ch2"; case SND_DJM_CAP_CH3PFADER: return "Post Fader Ch3"; case SND_DJM_CAP_CH4PFADER: return "Post Fader Ch4"; + case SND_DJM_CAP_EXT1SEND: return "EXT1 SEND"; + case SND_DJM_CAP_EXT2SEND: return "EXT2 SEND"; default: return NULL; } }; @@ -3653,7 +3660,8 @@ static const char *snd_djm_get_label_cap_850(u16 wvalue) static const char *snd_djm_get_label_caplevel(u8 device_idx, u16 wvalue) { switch (device_idx) { - case SND_DJM_A9_IDX: return snd_djm_get_label_caplevel_a9(wvalue); + case SND_DJM_A9_IDX: return snd_djm_get_label_caplevel_high(wvalue); + case SND_DJM_V10_IDX: return snd_djm_get_label_caplevel_high(wvalue); default: return snd_djm_get_label_caplevel_common(wvalue); } }; @@ -3853,6 +3861,50 @@ static const struct snd_djm_ctl snd_djm_ctls_a9[] = { SND_DJM_CTL("Ch4 Input", a9_cap5, 2, SND_DJM_WINDEX_CAP) }; +// DJM-V10 +static const u16 snd_djm_opts_v10_cap_level[] = { + 0x0000, 0x0100, 0x0200, 0x0300, 0x0400, 0x0500 +}; +static const u16 snd_djm_opts_v10_cap1[] = { + 0x0103, + 0x0100, 0x0102, 0x0106, 0x0110, 0x0107, + 0x0108, 0x0109, 0x010a, 0x0121, 0x0122 +}; +static const u16 snd_djm_opts_v10_cap2[] = { + 0x0200, 0x0202, 0x0206, 0x0210, 0x0207, + 0x0208, 0x0209, 0x020a, 0x0221, 0x0222 +}; +static const u16 snd_djm_opts_v10_cap3[] = { + 0x0303, + 0x0300, 0x0302, 0x0306, 0x0310, 0x0307, + 0x0308, 0x0309, 0x030a, 0x0321, 0x0322 +}; +static const u16 snd_djm_opts_v10_cap4[] = { + 0x0403, + 0x0400, 0x0402, 0x0406, 0x0410, 0x0407, + 0x0408, 0x0409, 0x040a, 0x0421, 0x0422 +}; +static const u16 snd_djm_opts_v10_cap5[] = { + 0x0500, 0x0502, 0x0506, 0x0510, 0x0507, + 0x0508, 0x0509, 0x050a, 0x0521, 0x0522 +}; +static const u16 snd_djm_opts_v10_cap6[] = { + 0x0603, + 0x0600, 0x0602, 0x0606, 0x0610, 0x0607, + 0x0608, 0x0609, 0x060a, 0x0621, 0x0622 +}; + +static const struct snd_djm_ctl snd_djm_ctls_v10[] = { + SND_DJM_CTL("Master Capture Level Capture Switch", v10_cap_level, 0, SND_DJM_WINDEX_CAPLVL), + SND_DJM_CTL("Capture Ch1 Capture Switch", v10_cap1, 2, SND_DJM_WINDEX_CAP), + SND_DJM_CTL("Capture Ch2 Capture Switch", v10_cap2, 2, SND_DJM_WINDEX_CAP), + SND_DJM_CTL("Capture Ch3 Capture Switch", v10_cap3, 0, SND_DJM_WINDEX_CAP), + SND_DJM_CTL("Capture Ch4 Capture Switch", v10_cap4, 0, SND_DJM_WINDEX_CAP), + SND_DJM_CTL("Capture Ch5 Capture Switch", v10_cap5, 0, SND_DJM_WINDEX_CAP), + SND_DJM_CTL("Capture Ch6 Capture Switch", v10_cap6, 0, SND_DJM_WINDEX_CAP) + // playback channels are fixed and controlled by hardware knobs on the mixer +}; + static const struct snd_djm_device snd_djm_devices[] = { [SND_DJM_250MK2_IDX] = SND_DJM_DEVICE(250mk2), [SND_DJM_750_IDX] = SND_DJM_DEVICE(750), @@ -3861,6 +3913,7 @@ static const struct snd_djm_device snd_djm_devices[] = { [SND_DJM_750MK2_IDX] = SND_DJM_DEVICE(750mk2), [SND_DJM_450_IDX] = SND_DJM_DEVICE(450), [SND_DJM_A9_IDX] = SND_DJM_DEVICE(a9), + [SND_DJM_V10_IDX] = SND_DJM_DEVICE(v10), }; @@ -4151,6 +4204,9 @@ int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer) case USB_ID(0x2b73, 0x003c): /* Pioneer DJ / AlphaTheta DJM-A9 */ err = snd_djm_controls_create(mixer, SND_DJM_A9_IDX); break; + case USB_ID(0x2b73, 0x0034): /* Pioneer DJ DJM-V10 */ + err = snd_djm_controls_create(mixer, SND_DJM_V10_IDX); + break; } return err; diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index 8954be23325c..eafc0d73cca1 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -3187,6 +3187,57 @@ YAMAHA_DEVICE(0x7010, "UB99"), } } }, +{ + /* + * Pioneer DJ DJM-V10 + */ + USB_DEVICE_VENDOR_SPEC(0x2b73, 0x0034), + QUIRK_DRIVER_INFO { + QUIRK_DATA_COMPOSITE { + { + QUIRK_DATA_AUDIOFORMAT(0) { + .formats = SNDRV_PCM_FMTBIT_S24_3LE, + .channels = 12, // outputs + .iface = 0, + .altsetting = 1, + .altset_idx = 1, + .endpoint = 0x01, + .ep_attr = USB_ENDPOINT_XFER_ISOC| + USB_ENDPOINT_SYNC_ASYNC, + .rates = SNDRV_PCM_RATE_44100| + SNDRV_PCM_RATE_48000| + SNDRV_PCM_RATE_96000, + .rate_min = 44100, + .rate_max = 96000, + .nr_rates = 3, + .rate_table = (unsigned int[]) { 44100, 48000, 96000 } + } + }, + { + QUIRK_DATA_AUDIOFORMAT(0) { + .formats = SNDRV_PCM_FMTBIT_S24_3LE, + .channels = 12, // inputs + .iface = 0, + .altsetting = 1, + .altset_idx = 1, + .endpoint = 0x82, + .ep_idx = 1, + .ep_attr = USB_ENDPOINT_XFER_ISOC| + USB_ENDPOINT_SYNC_ASYNC| + USB_ENDPOINT_USAGE_IMPLICIT_FB, + .rates = SNDRV_PCM_RATE_44100| + SNDRV_PCM_RATE_48000| + SNDRV_PCM_RATE_96000, + .rate_min = 44100, + .rate_max = 96000, + .nr_rates = 3, + .rate_table = (unsigned int[]) { 44100, 48000, 96000 } + } + }, + QUIRK_COMPOSITE_END + } + } +}, /* * MacroSilicon MS2100/MS2106 based AV capture cards diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 9112313a9dbc..4dcddab1a0e3 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1872,6 +1872,7 @@ void snd_usb_set_format_quirk(struct snd_usb_substream *subs, break; case USB_ID(0x2b73, 0x000a): /* Pioneer DJM-900NXS2 */ case USB_ID(0x2b73, 0x0013): /* Pioneer DJM-450 */ + case USB_ID(0x2b73, 0x0034): /* Pioneer DJM-V10 */ pioneer_djm_set_format_quirk(subs, 0x0082); break; case USB_ID(0x08e4, 0x017f): /* Pioneer DJM-750 */ -- 2.43.0

2 1

[PATCH 0/9] ALSA: usb-audio: More fixes / improvements on PCM
by Takashi Iwai 22 Apr '25

22 Apr '25

Hi, this is a patch set for USB-audio to fix and improve the PCM stream handling. The primary target is the enhancement of the low-latency playback that was introduced recently for dealing with the small period size (that is used typically by JACK). There are a few other fixes that are relevant with it. The current patches are found in topic/usb-audio branch of sound.git tree, too. Takashi === Takashi Iwai (9): ALSA: usb-audio: Restrict rates for the shared clocks ALSA: usb-audio: Fix possible race at sync of urb completions ALSA: usb-audio: Rename early_playback_start flag with lowlatency_playback ALSA: usb-audio: Disable low-latency playback for free-wheel mode ALSA: usb-audio: Disable low-latency mode for implicit feedback sync ALSA: usb-audio: Check available frames for the next packet size ALSA: usb-audio: Add spinlock to stop_urbs() ALSA: usb-audio: Improved lowlatency playback support ALSA: usb-audio: Avoid killing in-flight URBs during draining sound/usb/card.h | 11 ++- sound/usb/endpoint.c | 230 +++++++++++++++++++++++++++++++------------ sound/usb/endpoint.h | 13 ++- sound/usb/pcm.c | 157 ++++++++++++++++++++++------- 4 files changed, 305 insertions(+), 106 deletions(-) -- 2.26.2

2 23

acp3x-alc5682-max98357: Fix path of HiFi.conf
by GitHub pull_request - opened 22 Apr '25

22 Apr '25

alsa-project/alsa-ucm-conf pull request #551 was opened from meithecatte: Closes: https://github.com/alsa-project/alsa-ucm-conf/issues/550 Fixes: 1048796e7fa9 ("Rename ucm2/AMD/acp3xalc5682m98 to ucm2/AMD/acp3x-alc5682-max98357") Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/551 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/551.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Audio doesn't work on acp3xalc5682m98357 since 1.2.14
by GitHub issues - opened 22 Apr '25

22 Apr '25

alsa-project/alsa-ucm-conf issue #550 was opened from meithecatte: Since 1.2.14, pipewire doesn't detect the audio device, and trying to use `aplay` results in ``` ALSA lib pcm_dmix.c:1000:(snd_pcm_dmix_open) unable to open slave aplay: main:850: audio open error: No such file or directory ``` `aplay -l` lists ``` card 1: acp3xalc5682m98 [acp3xalc5682m98357], device 0: Playback rt5682-aif1-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: acp3xalc5682m98 [acp3xalc5682m98357], device 1: HiFi Playback HiFi-1 [] Subdevices: 1/1 Subdevice #0: subdevice #0 ``` `git bisect` says 0a87bd36b77e4e22397450d7ba3f9d36ce9eb5e0 is the first bad commit. Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/550 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH v1] ASoC: tas2781: Add "Acoustic Tuning" kcontrol for acoustic application
by Shenghao Ding 21 Apr '25

21 Apr '25

"Acoustic Tuning" kcontrol is a bridge to the acoustic tuning application tool which can tune the chips' acoustic effect. Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- include/sound/tas2781.h | 13 ++++ sound/soc/codecs/tas2781-i2c.c | 138 ++++++++++++++++++++++++++++++++- 2 files changed, 149 insertions(+), 2 deletions(-) diff --git a/include/sound/tas2781.h b/include/sound/tas2781.h index eff011444cc8..a9c236ab8cba 100644 --- a/include/sound/tas2781.h +++ b/include/sound/tas2781.h @@ -32,6 +32,8 @@ SNDRV_PCM_FMTBIT_S24_LE | \ SNDRV_PCM_FMTBIT_S32_LE) +#define TASDEV_DATA_PAYLOAD_SIZE 128 + /* PAGE Control Register (available in page0 of each book) */ #define TASDEVICE_PAGE_SELECT 0x00 #define TASDEVICE_BOOKCTL_PAGE 0x00 @@ -159,10 +161,21 @@ struct calidata { unsigned int cali_dat_sz_per_dev; }; +struct acoustic_data { + unsigned char len; + unsigned char id; + unsigned char addr; + unsigned char book; + unsigned char page; + unsigned char reg; + unsigned char data[TASDEV_DATA_PAYLOAD_SIZE]; +}; + struct tasdevice_priv { struct tasdevice tasdevice[TASDEVICE_MAX_CHANNELS]; struct tasdevice_rca rcabin; struct calidata cali_data; + struct acoustic_data acou_data; struct tasdevice_fw *fmw; struct gpio_desc *speaker_id; struct gpio_desc *reset; diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c index b950914b7d48..0d52cfc12743 100644 --- a/sound/soc/codecs/tas2781-i2c.c +++ b/sound/soc/codecs/tas2781-i2c.c @@ -328,6 +328,24 @@ static int tasdev_cali_data_get(struct snd_kcontrol *kcontrol, return 0; } +static int tasdev_acoustic_data_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *priv = snd_soc_component_get_drvdata(comp); + struct soc_bytes_ext *bytes_ext = + (struct soc_bytes_ext *) kcontrol->private_value; + unsigned char *dst = ucontrol->value.bytes.data; + struct acoustic_data *p = &priv->acou_data; + + if (p->id == 'r' && p->len <= bytes_ext->max) + memcpy(dst, p, p->len); + else + dev_err(priv->dev, "Not ready for get.\n"); + + return 0; +} + static int calib_data_get(struct tasdevice_priv *tas_priv, int reg, unsigned char *dst) { @@ -700,6 +718,84 @@ static int tasdev_tf_data_get(struct snd_kcontrol *kcontrol, return calib_data_get(tas_priv, reg, &dst[1]); } +static int tasdev_acoustic_data_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *priv = snd_soc_component_get_drvdata(comp); + struct soc_bytes_ext *bytes_ext = + (struct soc_bytes_ext *) kcontrol->private_value; + unsigned char *src = ucontrol->value.bytes.data; + int j, len, ret, value, reg; + unsigned short chn; + + if (src[0] > bytes_ext->max) { + dev_err(priv->dev, "pkg len(%u) is larger than max(%d).\n", + src[0], bytes_ext->max); + return 0; + } + + switch (src[1]) { + case 'r': + /* length of data to read */ + len = src[6]; + break; + case 'w': + /* Skip 6 bytes for package type and register address */ + len = src[0] - 6; + break; + default: + dev_err(priv->dev, "%s Wrong code %02x.\n", __func__, src[1]); + return 0; + } + + if (len < 1) { + dev_err(priv->dev, "pkg fmt invalid %02x.\n", len); + return 0; + } + + for (j = 0; j < priv->ndev; j++) + if (src[2] == priv->tasdevice[j].dev_addr) { + chn = j; + break; + } + if (j >= priv->ndev) { + dev_err(priv->dev, "no such device 0x%02x.\n", src[2]); + return 0; + } + + reg = TASDEVICE_REG(src[3], src[4], src[5]); + + guard(mutex)(&priv->codec_lock); + + if (src[1] == 'w') { + if (len > 1) + ret = tasdevice_dev_bulk_write(priv, chn, reg, + &src[6], len); + else + ret = tasdevice_dev_write(priv, chn, reg, src[6]); + } else { + struct acoustic_data *p = &priv->acou_data; + + memcpy(p, src, 6); + if (len > 1) { + ret = tasdevice_dev_bulk_read(priv, chn, reg, + p->data, len); + } else { + ret = tasdevice_dev_read(priv, chn, reg, &value); + p->data[0] = value; + } + p->len = len + 6; + } + + if (ret) { + dev_err(priv->dev, "i2c communication error.\n"); + return 0; + } + + return 1; +} + static int tasdev_re_data_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { @@ -1043,10 +1139,11 @@ static int tasdevice_get_chip_id(struct snd_kcontrol *kcontrol, static int tasdevice_create_control(struct tasdevice_priv *tas_priv) { struct snd_kcontrol_new *prof_ctrls; - int nr_controls = 1; + struct soc_bytes_ext *ext_acoustic; + char *acoustic_name, *name; + int nr_controls = 2; int mix_index = 0; int ret; - char *name; prof_ctrls = devm_kcalloc(tas_priv->dev, nr_controls, sizeof(prof_ctrls[0]), GFP_KERNEL); @@ -1068,6 +1165,43 @@ static int tasdevice_create_control(struct tasdevice_priv *tas_priv) prof_ctrls[mix_index].put = tasdevice_set_profile_id; mix_index++; + ext_acoustic = devm_kzalloc(tas_priv->dev, sizeof(*ext_acoustic), + GFP_KERNEL); + if (!ext_acoustic) + return -ENOMEM; + + /* + * This kcontrol is a bridge to the acoustic tuning application + * tool which can tune the chips' acoustic effect. + */ + acoustic_name = devm_kstrdup(tas_priv->dev, "Acoustic Tuning", + GFP_KERNEL); + if (!acoustic_name) + return -ENOMEM; + /* + * package structure for PPC3 communications: + * Pkg len (1 byte) + * Pkg id (1 byte, 'r' or 'w') + * Dev id (1 byte, i2c address) + * Book id (1 byte) + * Page id (1 byte) + * Reg id (1 byte) + * switch (pkg id) { + * case 'w': + * 1 byte, length of data to read + * case 'r': + * data payload (1~128 bytes) + * } + */ + ext_acoustic->max = sizeof(tas_priv->acou_data); + prof_ctrls[mix_index].name = acoustic_name; + prof_ctrls[mix_index].iface = SNDRV_CTL_ELEM_IFACE_MIXER; + prof_ctrls[mix_index].info = snd_soc_bytes_info_ext; + prof_ctrls[mix_index].put = tasdev_acoustic_data_put; + prof_ctrls[mix_index].get = tasdev_acoustic_data_get; + prof_ctrls[mix_index].private_value = (unsigned long)ext_acoustic; + mix_index++; + ret = snd_soc_add_component_controls(tas_priv->codec, prof_ctrls, nr_controls < mix_index ? nr_controls : mix_index); -- 2.34.1

3 5

Speaker can't mute when headphone was plugged
by Kailang 20 Apr '25

20 Apr '25

Hi Takashi, Speaker can't mute when headphone was plugged for HP platform. Add attach patch will solve issue. BR, Kailang

2 1

ucm2: MediaTek: mt8395-evk: Add support for SOF
by GitHub pull_request - opened 17 Apr '25

17 Apr '25

alsa-project/alsa-ucm-conf pull request #549 was opened from julien-massot: Similar to #513, add support for MT8395 with SOF enabled. We use different playback and capture PCM. Also, split the mixers that are not yet available upstream. Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/549 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/549.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

No audio on Lenovo Yoga Slim 7 14ILL10
by GitHub issues - edited 16 Apr '25

16 Apr '25

alsa-project/alsa-ucm-conf issue #548 was edited from miguel1117: Only "Dummy Output" is available as an output device on the Lenovo Yoga Slim 7 14ILL10. I'm not absolutely sure if this is the right place to report this so apologies if it's not. [ALSA information](https://alsa-project.org/db/?f=71342ec47d52681c81335d75d2947d8… Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/548 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

No audio on Lenovo Yoga Slim 7 14ILL10
by GitHub issues - edited 16 Apr '25

16 Apr '25

alsa-project/alsa-ucm-conf issue #548 was edited from miguel1117: Only "Dummy Output" is available as an output device on the Lenovo Yoga Slim 7 14ILL1. I'm not absolutely sure if this is the right place to report this so apologies if it's not. [ALSA information](https://alsa-project.org/db/?f=71342ec47d52681c81335d75d2947d8… Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/548 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH v3] ALSA: hda/tas2781: Create a common header for both spi and i2c tas2781 hda driver
by Shenghao Ding 16 Apr '25

16 Apr '25

Move the common macro definition of kcontrols into a common header for code cleanup, and create a common header to store the common declaration for both spi and i2c hda driver. Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- v3: - Add the purpose of this patch. v2: - Follow IWYU principle, add sound/asound.h into the header file. v1: - Revise the year of spi and i2c tas2781 hda drivers. - Create a common header for both spi and i2c tas2781 hda driver to define the common macros and declare the common functions. --- sound/pci/hda/tas2781_hda.h | 44 +++++++++++++++++++++++++++++++++ sound/pci/hda/tas2781_hda_i2c.c | 29 ++-------------------- sound/pci/hda/tas2781_hda_spi.c | 35 ++------------------------ 3 files changed, 48 insertions(+), 60 deletions(-) create mode 100644 sound/pci/hda/tas2781_hda.h diff --git a/sound/pci/hda/tas2781_hda.h b/sound/pci/hda/tas2781_hda.h new file mode 100644 index 000000000000..fc741fac419a --- /dev/null +++ b/sound/pci/hda/tas2781_hda.h @@ -0,0 +1,44 @@ +/* SPDX-License-Identifier: GPL-2.0-only + * + * HDA audio driver for Texas Instruments TAS2781 smart amp + * + * Copyright (C) 2025 Texas Instruments, Inc. + */ +#ifndef __TAS2781_HDA_H__ +#define __TAS2781_HDA_H__ + +#include <sound/asound.h> + +/* + * No standard control callbacks for SNDRV_CTL_ELEM_IFACE_CARD + * Define two controls, one is Volume control callbacks, the other is + * flag setting control callbacks. + */ + +/* Volume control callbacks for tas2781 */ +#define ACARD_SINGLE_RANGE_EXT_TLV(xname, xreg, xshift, xmin, xmax, xinvert, \ + xhandler_get, xhandler_put, tlv_array) { \ + .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = (xname), \ + .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \ + SNDRV_CTL_ELEM_ACCESS_READWRITE, \ + .tlv.p = (tlv_array), \ + .info = snd_soc_info_volsw, \ + .get = xhandler_get, .put = xhandler_put, \ + .private_value = (unsigned long)&(struct soc_mixer_control) { \ + .reg = xreg, .rreg = xreg, \ + .shift = xshift, .rshift = xshift,\ + .min = xmin, .max = xmax, .invert = xinvert, \ + } \ +} + +/* Flag control callbacks for tas2781 */ +#define ACARD_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) { \ + .iface = SNDRV_CTL_ELEM_IFACE_CARD, \ + .name = xname, \ + .info = snd_ctl_boolean_mono_info, \ + .get = xhandler_get, \ + .put = xhandler_put, \ + .private_value = xdata, \ +} + +#endif diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c index 29dc4f500580..9d94ae5fcfe0 100644 --- a/sound/pci/hda/tas2781_hda_i2c.c +++ b/sound/pci/hda/tas2781_hda_i2c.c @@ -2,7 +2,7 @@ // // TAS2781 HDA I2C driver // -// Copyright 2023 - 2024 Texas Instruments, Inc. +// Copyright 2023 - 2025 Texas Instruments, Inc. // // Author: Shenghao Ding <shenghao-ding(a)ti.com> // Current maintainer: Baojun Xu <baojun.xu(a)ti.com> @@ -30,35 +30,10 @@ #include "hda_component.h" #include "hda_jack.h" #include "hda_generic.h" +#include "tas2781_hda.h" #define TASDEVICE_SPEAKER_CALIBRATION_SIZE 20 -/* No standard control callbacks for SNDRV_CTL_ELEM_IFACE_CARD - * Define two controls, one is Volume control callbacks, the other is - * flag setting control callbacks. - */ - -/* Volume control callbacks for tas2781 */ -#define ACARD_SINGLE_RANGE_EXT_TLV(xname, xreg, xshift, xmin, xmax, xinvert, \ - xhandler_get, xhandler_put, tlv_array) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = (xname),\ - .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\ - SNDRV_CTL_ELEM_ACCESS_READWRITE,\ - .tlv.p = (tlv_array), \ - .info = snd_soc_info_volsw, \ - .get = xhandler_get, .put = xhandler_put, \ - .private_value = (unsigned long)&(struct soc_mixer_control) \ - {.reg = xreg, .rreg = xreg, .shift = xshift, \ - .rshift = xshift, .min = xmin, .max = xmax, \ - .invert = xinvert} } - -/* Flag control callbacks for tas2781 */ -#define ACARD_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = xname, \ - .info = snd_ctl_boolean_mono_info, \ - .get = xhandler_get, .put = xhandler_put, \ - .private_value = xdata } - enum calib_data { R0_VAL = 0, INV_R0, diff --git a/sound/pci/hda/tas2781_hda_spi.c b/sound/pci/hda/tas2781_hda_spi.c index 399f2e4c3b62..c6be2be1b53e 100644 --- a/sound/pci/hda/tas2781_hda_spi.c +++ b/sound/pci/hda/tas2781_hda_spi.c @@ -2,7 +2,7 @@ // // TAS2781 HDA SPI driver // -// Copyright 2024 Texas Instruments, Inc. +// Copyright 2024 - 2025 Texas Instruments, Inc. // // Author: Baojun Xu <baojun.xu(a)ti.com> @@ -38,38 +38,7 @@ #include "hda_component.h" #include "hda_jack.h" #include "hda_generic.h" - -/* - * No standard control callbacks for SNDRV_CTL_ELEM_IFACE_CARD - * Define two controls, one is Volume control callbacks, the other is - * flag setting control callbacks. - */ - -/* Volume control callbacks for tas2781 */ -#define ACARD_SINGLE_RANGE_EXT_TLV(xname, xreg, xshift, xmin, xmax, xinvert, \ - xhandler_get, xhandler_put, tlv_array) { \ - .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = (xname), \ - .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \ - SNDRV_CTL_ELEM_ACCESS_READWRITE, \ - .tlv.p = (tlv_array), \ - .info = snd_soc_info_volsw, \ - .get = xhandler_get, .put = xhandler_put, \ - .private_value = (unsigned long)&(struct soc_mixer_control) { \ - .reg = xreg, .rreg = xreg, \ - .shift = xshift, .rshift = xshift,\ - .min = xmin, .max = xmax, .invert = xinvert, \ - } \ -} - -/* Flag control callbacks for tas2781 */ -#define ACARD_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) { \ - .iface = SNDRV_CTL_ELEM_IFACE_CARD, \ - .name = xname, \ - .info = snd_ctl_boolean_mono_info, \ - .get = xhandler_get, \ - .put = xhandler_put, \ - .private_value = xdata, \ -} +#include "tas2781_hda.h" struct tas2781_hda { struct tasdevice_priv *priv; -- 2.34.1

2 1

No audio on Lenovo Yoga Slim 7 14ILL1
by GitHub issues - edited 15 Apr '25

15 Apr '25

alsa-project/alsa-ucm-conf issue #548 was edited from miguel1117: Only "Dummy Output" is available as an output device on the Lenovo Yoga Slim 7 14ILL1. I'm not absolutely sure if this is the right place to report this so apologies if it's not. [ALSA information](https://alsa-project.org/db/?f=71342ec47d52681c81335d75d2947d8… Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/548 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

No audio on Lenovo Yoga Slim 7 14ILL1
by GitHub issues - opened 15 Apr '25

15 Apr '25

alsa-project/alsa-ucm-conf issue #548 was opened from miguel1117: Only "Dummy Output" is available as an output device on the Lenovo Yoga Slim 7 14ILL1. I'm not absolutely sure if this is the right place to report this so apologies if it's not. [ALSA information](https://alsa-project.org/db/?f=80c739775b022831be9c3aad038f8de… Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/548 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Steinberg UR22C: Version 1.2.14 introduced "[ALSA UCM error]" on older firmware.
by GitHub issues - edited 15 Apr '25

15 Apr '25

alsa-project/alsa-ucm-conf issue #547 was edited from NoXPhasma: Since version 1.2.14 the `node.description` of the Steinberg UR22C shows `[ALSA UCM error]`: ``` node.description = "Steinberg UR22C [ALSA UCM error] Direct Steinberg UR22C" ``` ``` > journalctl --user -u wireplumber --boot 0 systemd[1286]: Started Multimedia Service Session Manager. wp-internal-comp-loader: Loading profile 'main' spa.alsa: Error in ALSA UCM profile for _ucm0001.hw:UR22C,0 (HiFi: Line 3: source): CaptureChannels=4 > avail 2 spa.alsa: Errors in ALSA UCM profile for card Steinberg UR22C wireplumber[1359]: wp-device: SPA handle 'api.libcamera.enum.manager' could not be loaded; is it installed? wireplumber[1359]: s-monitors-libcamera: PipeWire's libcamera SPA plugin is missing or broken. Some camera types may not be supported. wireplumber[1359]: default: Failed to get percentage from UPower: org.freedesktop.DBus.Error.NameHasNoOwner wireplumber[1359]: spa.bluez5: BlueZ system service is not available ``` Reverting to version 1.2.13 fixes this issue. Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/547 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Steinberg UR22C: Version 1.2.14 introduced "[ALSA UCM error]"
by GitHub issues - edited 15 Apr '25

15 Apr '25

alsa-project/alsa-ucm-conf issue #547 was edited from NoXPhasma: Since version 1.2.14 the `node.description` of the Steinberg UR22C shows `[ALSA UCM error]`: ``` node.description = "Steinberg UR22C [ALSA UCM error] Direct Steinberg UR22C" ``` ``` > journalctl --user -u wireplumber --boot 0 systemd[1286]: Started Multimedia Service Session Manager. wp-internal-comp-loader: Loading profile 'main' spa.alsa: Error in ALSA UCM profile for _ucm0001.hw:UR22C,0 (HiFi: Line 3: source): CaptureChannels=4 > avail 2 spa.alsa: Errors in ALSA UCM profile for card Steinberg UR22C wireplumber[1359]: wp-device: SPA handle 'api.libcamera.enum.manager' could not be loaded; is it installed? wireplumber[1359]: s-monitors-libcamera: PipeWire's libcamera SPA plugin is missing or broken. Some camera types may not be supported. wireplumber[1359]: default: Failed to get percentage from UPower: org.freedesktop.DBus.Error.NameHasNoOwner wireplumber[1359]: spa.bluez5: BlueZ system service is not available ``` Reverting to version 1.2.13 fixes this issue. Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/547 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Steinberg UR22C: Version 1.2.14 introduced "[ALSA UCM error]"
by GitHub issues - opened 15 Apr '25

15 Apr '25

alsa-project/alsa-ucm-conf issue #547 was opened from NoXPhasma: Since version 1.2.14 the `node.description` of the Steinberg UR22C shows `[ALSA UCM error]`: ``` node.description = "Steinberg UR22C [ALSA UCM error] Direct Steinberg UR22C" ``` Reverting to version 1.2.13 fixes this issue. Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/547 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[RESEND PATCH v2] ALSA: hda/tas2781: Create a common header for both spi and i2c tas2781 hda driver
by Shenghao Ding 15 Apr '25

15 Apr '25

Move the common macro definition of kcontrols into a common header. Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- v2: - Follow IWYU principle, add sound/asound.h into the header file. v1: - Revise the year of spi and i2c tas2781 hda drivers. - Create a common header for both spi and i2c tas2781 hda driver to define the common macros and declare the common functions. --- sound/pci/hda/tas2781_hda.h | 44 +++++++++++++++++++++++++++++++++ sound/pci/hda/tas2781_hda_i2c.c | 29 ++-------------------- sound/pci/hda/tas2781_hda_spi.c | 35 ++------------------------ 3 files changed, 48 insertions(+), 60 deletions(-) create mode 100644 sound/pci/hda/tas2781_hda.h diff --git a/sound/pci/hda/tas2781_hda.h b/sound/pci/hda/tas2781_hda.h new file mode 100644 index 000000000000..fc741fac419a --- /dev/null +++ b/sound/pci/hda/tas2781_hda.h @@ -0,0 +1,44 @@ +/* SPDX-License-Identifier: GPL-2.0-only + * + * HDA audio driver for Texas Instruments TAS2781 smart amp + * + * Copyright (C) 2025 Texas Instruments, Inc. + */ +#ifndef __TAS2781_HDA_H__ +#define __TAS2781_HDA_H__ + +#include <sound/asound.h> + +/* + * No standard control callbacks for SNDRV_CTL_ELEM_IFACE_CARD + * Define two controls, one is Volume control callbacks, the other is + * flag setting control callbacks. + */ + +/* Volume control callbacks for tas2781 */ +#define ACARD_SINGLE_RANGE_EXT_TLV(xname, xreg, xshift, xmin, xmax, xinvert, \ + xhandler_get, xhandler_put, tlv_array) { \ + .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = (xname), \ + .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \ + SNDRV_CTL_ELEM_ACCESS_READWRITE, \ + .tlv.p = (tlv_array), \ + .info = snd_soc_info_volsw, \ + .get = xhandler_get, .put = xhandler_put, \ + .private_value = (unsigned long)&(struct soc_mixer_control) { \ + .reg = xreg, .rreg = xreg, \ + .shift = xshift, .rshift = xshift,\ + .min = xmin, .max = xmax, .invert = xinvert, \ + } \ +} + +/* Flag control callbacks for tas2781 */ +#define ACARD_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) { \ + .iface = SNDRV_CTL_ELEM_IFACE_CARD, \ + .name = xname, \ + .info = snd_ctl_boolean_mono_info, \ + .get = xhandler_get, \ + .put = xhandler_put, \ + .private_value = xdata, \ +} + +#endif diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c index 29dc4f500580..9d94ae5fcfe0 100644 --- a/sound/pci/hda/tas2781_hda_i2c.c +++ b/sound/pci/hda/tas2781_hda_i2c.c @@ -2,7 +2,7 @@ // // TAS2781 HDA I2C driver // -// Copyright 2023 - 2024 Texas Instruments, Inc. +// Copyright 2023 - 2025 Texas Instruments, Inc. // // Author: Shenghao Ding <shenghao-ding(a)ti.com> // Current maintainer: Baojun Xu <baojun.xu(a)ti.com> @@ -30,35 +30,10 @@ #include "hda_component.h" #include "hda_jack.h" #include "hda_generic.h" +#include "tas2781_hda.h" #define TASDEVICE_SPEAKER_CALIBRATION_SIZE 20 -/* No standard control callbacks for SNDRV_CTL_ELEM_IFACE_CARD - * Define two controls, one is Volume control callbacks, the other is - * flag setting control callbacks. - */ - -/* Volume control callbacks for tas2781 */ -#define ACARD_SINGLE_RANGE_EXT_TLV(xname, xreg, xshift, xmin, xmax, xinvert, \ - xhandler_get, xhandler_put, tlv_array) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = (xname),\ - .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\ - SNDRV_CTL_ELEM_ACCESS_READWRITE,\ - .tlv.p = (tlv_array), \ - .info = snd_soc_info_volsw, \ - .get = xhandler_get, .put = xhandler_put, \ - .private_value = (unsigned long)&(struct soc_mixer_control) \ - {.reg = xreg, .rreg = xreg, .shift = xshift, \ - .rshift = xshift, .min = xmin, .max = xmax, \ - .invert = xinvert} } - -/* Flag control callbacks for tas2781 */ -#define ACARD_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = xname, \ - .info = snd_ctl_boolean_mono_info, \ - .get = xhandler_get, .put = xhandler_put, \ - .private_value = xdata } - enum calib_data { R0_VAL = 0, INV_R0, diff --git a/sound/pci/hda/tas2781_hda_spi.c b/sound/pci/hda/tas2781_hda_spi.c index 399f2e4c3b62..c6be2be1b53e 100644 --- a/sound/pci/hda/tas2781_hda_spi.c +++ b/sound/pci/hda/tas2781_hda_spi.c @@ -2,7 +2,7 @@ // // TAS2781 HDA SPI driver // -// Copyright 2024 Texas Instruments, Inc. +// Copyright 2024 - 2025 Texas Instruments, Inc. // // Author: Baojun Xu <baojun.xu(a)ti.com> @@ -38,38 +38,7 @@ #include "hda_component.h" #include "hda_jack.h" #include "hda_generic.h" - -/* - * No standard control callbacks for SNDRV_CTL_ELEM_IFACE_CARD - * Define two controls, one is Volume control callbacks, the other is - * flag setting control callbacks. - */ - -/* Volume control callbacks for tas2781 */ -#define ACARD_SINGLE_RANGE_EXT_TLV(xname, xreg, xshift, xmin, xmax, xinvert, \ - xhandler_get, xhandler_put, tlv_array) { \ - .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = (xname), \ - .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \ - SNDRV_CTL_ELEM_ACCESS_READWRITE, \ - .tlv.p = (tlv_array), \ - .info = snd_soc_info_volsw, \ - .get = xhandler_get, .put = xhandler_put, \ - .private_value = (unsigned long)&(struct soc_mixer_control) { \ - .reg = xreg, .rreg = xreg, \ - .shift = xshift, .rshift = xshift,\ - .min = xmin, .max = xmax, .invert = xinvert, \ - } \ -} - -/* Flag control callbacks for tas2781 */ -#define ACARD_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) { \ - .iface = SNDRV_CTL_ELEM_IFACE_CARD, \ - .name = xname, \ - .info = snd_ctl_boolean_mono_info, \ - .get = xhandler_get, \ - .put = xhandler_put, \ - .private_value = xdata, \ -} +#include "tas2781_hda.h" struct tas2781_hda { struct tasdevice_priv *priv; -- 2.34.1

2 1

1.2.14: SetuptoolsDeprecationWarning due to the use of `sys.exit(0)`
by GitHub issues - opened 15 Apr '25

15 Apr '25

alsa-project/alsa-python issue #18 was opened from dvzrv: Hi! 👋 I package this project for Arch Linux. During update to 1.2.14 I noticed that setuptools now raises the following warning: ``` /usr/lib/python3.13/site-packages/setuptools/build_meta.py:522: SetuptoolsDeprecationWarning: Running `setup.py` directly as CLI tool is deprecated. !! ******************************************************************************** Please avoid using `sys.exit(0)` or similar statements that don't fit in the paradigm of a configuration file. See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html for details. ******************************************************************************** !! super().run_setup(setup_script=setup_script) ``` This appears to be triggered by the `sys.exit(0)` call in setup.py: https://github.com/alsa-project/alsa-python/blob/20b2b3999f24af462815b9c86e… (Setuptools now offers one of the various PEP517 build backends and calling setup.py directly as a script is deprecated). Looking at the file I noticed that there are still conditionals that accommodate Python2: https://github.com/alsa-project/alsa-python/blob/20b2b3999f24af462815b9c86e… Those should be removed, as the script itself is marked as Python3 (and well of course because Python2 is long discontinued 😅). Issue URL : https://github.com/alsa-project/alsa-python/issues/18 Repository URL: https://github.com/alsa-project/alsa-python

1 0

recent change in seqmid.c is broken?
by Takashi Iwai 15 Apr '25

15 Apr '25

Hi Jaroslav, I'm afraid that your recent fix for alsa-lib commit a4e47461eca1 doesn't work as expected: ``` @@ -664,15 +663,11 @@ static void update_group_ports(snd_seq_t *seq, snd_ump_endpoint_info_t *ep) break; } - if (!*bp->name) + if (bp->name[0] == '\0') continue; - len = strlen(blknames); - if (len) - snprintf(blknames + len, sizeof(blknames) - len, - ", %s", bp->name); - else - snd_strlcpy(blknames, (const char *)bp->name, - sizeof(blknames)); + if (blknames[0]) + snd_strlcpy(blknames, ", ", sizeof(blknames)); + snd_strlcpy(blknames, (const char *)bp->name, sizeof(blknames)); } if (!*blknames) ``` The original code appended the new bp->name string with the prefix of ", " if blknames is already present, but the new code looks as if it overwrites onto blknames with strlcpy() from scratch for each bp->name. FWIW, the code there used to be with strlcat(), but it was rewritten in the way above because strlcat() isn't always available in commit d9694398130c. thanks, Takashi

2 3

On output devices, `snd_pcm_open()` makes a bad loud tick.
by GitHub issues - opened 13 Apr '25

13 Apr '25

alsa-project/alsa-lib issue #451 was opened from ewtoombs: Minimal reproduction: ``` #include <alsa/asoundlib.h> #include <stdbool.h> int main(int argc, const char **argv) { snd_pcm_t *out; assert(snd_pcm_open(&out, "default", // the name of the device being opened SND_PCM_STREAM_PLAYBACK, // it is an output stream false // iff nonblocking stream ) == 0); } ``` (Compile with `gcc -o test test.c -lasound`.) Relevant `lspci`: ``` 00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21) ``` `uname`: ``` Linux robert 6.13.8-arch1-1 #1 SMP PREEMPT_DYNAMIC Sun, 23 Mar 2025 17:17:30 +0000 x86_64 GNU/Linux ``` alsa-lib version: 1.2.13-1 (archlinux) I've heard similar artefacts on many different sound cards, though, across many different architectures, always on linux. One must wait about five minutes in between trials, or the artefact does not occur. This isn't a minor detail. The tick is very loud. It might even damage speakers in a worst case scenario. Issue URL : https://github.com/alsa-project/alsa-lib/issues/451 Repository URL: https://github.com/alsa-project/alsa-lib

1 0

[GIT PULL] ASoC fixes for v6.15-rc1
by Mark Brown 11 Apr '25

11 Apr '25

The following changes since commit 0af2f6be1b4281385b618cb86ad946eded089ac8: Linux 6.15-rc1 (2025-04-06 13:11:33 -0700) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git tags/asoc-fix-v6.15-rc1 for you to fetch changes up to e6c4618422a25cb266bf752040eb509865caeb0e: MAINTAINERS: update my email address (2025-04-11 06:17:24 +0100) ---------------------------------------------------------------- ASoC: Fixes for v6.15 A set of small fixes, quirks and device ID additions that came in since -rc1, none of them super stand out. There's also a change to Srini's email address in MAINTAINERS. ---------------------------------------------------------------- Amadeusz Sławiński (1): ASoC: Intel: avs: Constrain path based on BE capabilities Brady Norander (1): ASoC: dwc: always enable/disable i2s irqs Charles Keepax (1): ASoC: cs42l43: Reset clamp override on jack removal Evgeny Pimenov (1): ASoC: qcom: Fix sc7280 lpass potential buffer overflow Henry Martin (1): ASoC: Intel: avs: Fix null-ptr-deref in avs_component_probe() Herve Codina (1): ASoC: fsl: fsl_qmc_audio: Reset audio data pointers on TRIGGER_START event Kuninori Morimoto (1): ASoC: hdmi-codec: use RTD ID instead of DAI ID for ELD entry Mark Brown (2): ASoC: codecs: lpass-wsa: fix VI capture setup. MAINTAINERS: update my email address Peter Ujfalusi (1): ASoC: Intel: sof_sdw: Add quirk for Asus Zenbook S16 Richard Fitzgerald (1): firmware: cs_dsp: test_bin_error: Fix uninitialized data used as fw version Shengjiu Wang (1): ASoC: fsl_asrc_dma: get codec or cpu dai from backend Srinivas Kandagatla (4): ASoC: codecs:lpass-wsa-macro: Fix vi feedback rate ASoC: codecs:lpass-wsa-macro: Fix logic of enabling vi channels MAINTAINERS: use kernel.org alias mailmap: Add entry for Srinivas Kandagatla Weidong Wang (1): ASoC: codecs: Add of_match_table for aw888081 driver .mailmap | 2 + MAINTAINERS | 8 +- .../firmware/cirrus/test/cs_dsp_mock_mem_maps.c | 30 ------ drivers/firmware/cirrus/test/cs_dsp_test_bin.c | 2 +- .../firmware/cirrus/test/cs_dsp_test_bin_error.c | 2 +- include/linux/firmware/cirrus/cs_dsp_test_utils.h | 1 - sound/soc/codecs/aw88081.c | 10 ++ sound/soc/codecs/cs42l43-jack.c | 3 + sound/soc/codecs/hdmi-codec.c | 22 +++- sound/soc/codecs/lpass-wsa-macro.c | 117 +++++++++++++++------ sound/soc/dwc/dwc-i2s.c | 13 ++- sound/soc/fsl/fsl_asrc_dma.c | 15 ++- sound/soc/fsl/fsl_qmc_audio.c | 3 + sound/soc/intel/avs/path.c | 72 +++++++++++++ sound/soc/intel/avs/path.h | 5 + sound/soc/intel/avs/pcm.c | 52 ++++++++- sound/soc/intel/boards/sof_sdw.c | 1 + sound/soc/qcom/lpass.h | 3 +- 18 files changed, 277 insertions(+), 84 deletions(-)

2 1

[PATCH 0/2] MAINTAINERS: update my email address
by srinivas.kandagatla＠linaro.org 11 Apr '25

11 Apr '25

From: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> Update .mailmap and MAINTAINERS to point to the @kernel.org instead of the @linaro.org. Linaro address will stop working in few days. Mark or Greg, could you please pick these two patches? Srinivas Kandagatla (2): MAINTAINERS: use kernel.org alias mailmap: Add entry for Srinivas Kandagatla .mailmap | 2 ++ MAINTAINERS | 8 ++++---- 2 files changed, 6 insertions(+), 4 deletions(-) -- 2.25.1

2 3

Add support of HyperX SoloCast
by GitHub pull_request - opened 10 Apr '25

10 Apr '25

alsa-project/alsa-ucm-conf pull request #545 was opened from serhii-nakon: Support of - volume control - un/mute control PS: About un/mute control - only from PC to Mic, vise versa does not work - like when you un/mute Mic on PC it works as expected (even LED show actual status) but when you click button on Mic side it does not reflect on PC side. Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/545 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/545.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

ucm2: Qualcomm: add Asus Zenbook A14
by GitHub pull_request - opened 10 Apr '25

10 Apr '25

alsa-project/alsa-ucm-conf pull request #544 was opened from alexVinarskis: Add a Regex string, seems compatible with Lenovo T14s x2 speakers, x2 DMICs, x3 DP (x2 USB-C, x1 DP->HDMI), headphone jack. Initial support for the platform is available on the [lists](https://lore.kernel.org/all/20250402084646.10098-1-alex.vinarskis@gm…, with [Audio part ](https://github.com/alexVinarskis/linux-x1e80100-zenbook-a14/blob/master/0013-arm64-dts-qcom-support-sound-on-Asus-Zenbook-A14.patch)not being upstreamed just yet. Tested that speakers, MICs and jack are working. Respective audioreach-topology changes are open [for PR.](https://github.com/linux-msm/audioreach-topology/pull/14) Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/544 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/544.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH v2] ALSA: hda/tas2781: Create a common header for both spi and i2c tas2781 hda driver
by Shenghao Ding 10 Apr '25

10 Apr '25

Move the common macro definition of kcontrols into a common header. Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- v2: - Follow IWYU principle, add sound/asound.h into the header file. v1: - Revise the year of spi and i2c tas2781 hda drivers. - Create a common header for both spi and i2c tas2781 hda driver to define the common macros and declare the common functions. --- sound/pci/hda/tas2781_hda.h | 44 +++++++++++++++++++++++++++++++++ sound/pci/hda/tas2781_hda_i2c.c | 29 ++-------------------- sound/pci/hda/tas2781_hda_spi.c | 35 ++------------------------ 3 files changed, 48 insertions(+), 60 deletions(-) create mode 100644 sound/pci/hda/tas2781_hda.h diff --git a/sound/pci/hda/tas2781_hda.h b/sound/pci/hda/tas2781_hda.h new file mode 100644 index 000000000000..fc741fac419a --- /dev/null +++ b/sound/pci/hda/tas2781_hda.h @@ -0,0 +1,44 @@ +/* SPDX-License-Identifier: GPL-2.0-only + * + * HDA audio driver for Texas Instruments TAS2781 smart amp + * + * Copyright (C) 2025 Texas Instruments, Inc. + */ +#ifndef __TAS2781_HDA_H__ +#define __TAS2781_HDA_H__ + +#include <sound/asound.h> + +/* + * No standard control callbacks for SNDRV_CTL_ELEM_IFACE_CARD + * Define two controls, one is Volume control callbacks, the other is + * flag setting control callbacks. + */ + +/* Volume control callbacks for tas2781 */ +#define ACARD_SINGLE_RANGE_EXT_TLV(xname, xreg, xshift, xmin, xmax, xinvert, \ + xhandler_get, xhandler_put, tlv_array) { \ + .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = (xname), \ + .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \ + SNDRV_CTL_ELEM_ACCESS_READWRITE, \ + .tlv.p = (tlv_array), \ + .info = snd_soc_info_volsw, \ + .get = xhandler_get, .put = xhandler_put, \ + .private_value = (unsigned long)&(struct soc_mixer_control) { \ + .reg = xreg, .rreg = xreg, \ + .shift = xshift, .rshift = xshift,\ + .min = xmin, .max = xmax, .invert = xinvert, \ + } \ +} + +/* Flag control callbacks for tas2781 */ +#define ACARD_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) { \ + .iface = SNDRV_CTL_ELEM_IFACE_CARD, \ + .name = xname, \ + .info = snd_ctl_boolean_mono_info, \ + .get = xhandler_get, \ + .put = xhandler_put, \ + .private_value = xdata, \ +} + +#endif diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c index 29dc4f500580..9d94ae5fcfe0 100644 --- a/sound/pci/hda/tas2781_hda_i2c.c +++ b/sound/pci/hda/tas2781_hda_i2c.c @@ -2,7 +2,7 @@ // // TAS2781 HDA I2C driver // -// Copyright 2023 - 2024 Texas Instruments, Inc. +// Copyright 2023 - 2025 Texas Instruments, Inc. // // Author: Shenghao Ding <shenghao-ding(a)ti.com> // Current maintainer: Baojun Xu <baojun.xu(a)ti.com> @@ -30,35 +30,10 @@ #include "hda_component.h" #include "hda_jack.h" #include "hda_generic.h" +#include "tas2781_hda.h" #define TASDEVICE_SPEAKER_CALIBRATION_SIZE 20 -/* No standard control callbacks for SNDRV_CTL_ELEM_IFACE_CARD - * Define two controls, one is Volume control callbacks, the other is - * flag setting control callbacks. - */ - -/* Volume control callbacks for tas2781 */ -#define ACARD_SINGLE_RANGE_EXT_TLV(xname, xreg, xshift, xmin, xmax, xinvert, \ - xhandler_get, xhandler_put, tlv_array) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = (xname),\ - .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\ - SNDRV_CTL_ELEM_ACCESS_READWRITE,\ - .tlv.p = (tlv_array), \ - .info = snd_soc_info_volsw, \ - .get = xhandler_get, .put = xhandler_put, \ - .private_value = (unsigned long)&(struct soc_mixer_control) \ - {.reg = xreg, .rreg = xreg, .shift = xshift, \ - .rshift = xshift, .min = xmin, .max = xmax, \ - .invert = xinvert} } - -/* Flag control callbacks for tas2781 */ -#define ACARD_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = xname, \ - .info = snd_ctl_boolean_mono_info, \ - .get = xhandler_get, .put = xhandler_put, \ - .private_value = xdata } - enum calib_data { R0_VAL = 0, INV_R0, diff --git a/sound/pci/hda/tas2781_hda_spi.c b/sound/pci/hda/tas2781_hda_spi.c index 399f2e4c3b62..c6be2be1b53e 100644 --- a/sound/pci/hda/tas2781_hda_spi.c +++ b/sound/pci/hda/tas2781_hda_spi.c @@ -2,7 +2,7 @@ // // TAS2781 HDA SPI driver // -// Copyright 2024 Texas Instruments, Inc. +// Copyright 2024 - 2025 Texas Instruments, Inc. // // Author: Baojun Xu <baojun.xu(a)ti.com> @@ -38,38 +38,7 @@ #include "hda_component.h" #include "hda_jack.h" #include "hda_generic.h" - -/* - * No standard control callbacks for SNDRV_CTL_ELEM_IFACE_CARD - * Define two controls, one is Volume control callbacks, the other is - * flag setting control callbacks. - */ - -/* Volume control callbacks for tas2781 */ -#define ACARD_SINGLE_RANGE_EXT_TLV(xname, xreg, xshift, xmin, xmax, xinvert, \ - xhandler_get, xhandler_put, tlv_array) { \ - .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = (xname), \ - .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \ - SNDRV_CTL_ELEM_ACCESS_READWRITE, \ - .tlv.p = (tlv_array), \ - .info = snd_soc_info_volsw, \ - .get = xhandler_get, .put = xhandler_put, \ - .private_value = (unsigned long)&(struct soc_mixer_control) { \ - .reg = xreg, .rreg = xreg, \ - .shift = xshift, .rshift = xshift,\ - .min = xmin, .max = xmax, .invert = xinvert, \ - } \ -} - -/* Flag control callbacks for tas2781 */ -#define ACARD_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) { \ - .iface = SNDRV_CTL_ELEM_IFACE_CARD, \ - .name = xname, \ - .info = snd_ctl_boolean_mono_info, \ - .get = xhandler_get, \ - .put = xhandler_put, \ - .private_value = xdata, \ -} +#include "tas2781_hda.h" struct tas2781_hda { struct tasdevice_priv *priv; -- 2.34.1

1 0

Enable Headset Mic for ASUS platform
by Kailang 09 Apr '25

09 Apr '25

Hi Takashi, Attach patch was fixed headset Mic issue for Asus platform. Many Thanks. Kailang.

2 1

Dell Precision 3571: DMIC not detected by SOF driver, silent mic under Linux, works in Windows
by Adam Larios 08 Apr '25

08 Apr '25

*System*: Dell Precision 3571 Realtek ALC3204 codec Intel Alder Lake (SOF platform) *Symptoms*: Internal mic is silent or muffled in all Linux applications Works perfectly in Windows SOF driver loads correctly with firmware sof-adl.ri and topology sof-hda-generic.tplg But dmesg shows: sof-audio-pci-intel-tgl 0000:00:1f.3: DMICs detected in NHLT tables: 0 No working audio input nodes exposed in PipeWire *Tested*: - Ubuntu 24.04 with kernel 6.8.0-57-generic - snd-intel-dspcfg.dsp_driver=3 set - PulseAudio and PipeWire backends - alsa-base.conf overrides for model options - hdajackretask pin remapping - SOF firmware and topology confirmed present *Conclusion*: Firmware/ACPI likely missing DMIC NHLT entry; requesting kernel quirk or guidance

1 0

[PATCH v1] ALSA: hda/tas2781: Create a common header for both spi and i2c tas2781 hda driver
by Shenghao Ding 08 Apr '25

08 Apr '25

Move the common macro definition of kcontrols into a common header. Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- v1: - revise the year of spi and i2c tas2781 hda drivers. - Create a common header for both spi and i2c tas2781 hda driver to define the common macros and declare the common functions. --- sound/pci/hda/tas2781_hda.h | 42 +++++++++++++++++++++++++++++++++ sound/pci/hda/tas2781_hda_i2c.c | 29 ++--------------------- sound/pci/hda/tas2781_hda_spi.c | 35 ++------------------------- 3 files changed, 46 insertions(+), 60 deletions(-) create mode 100644 sound/pci/hda/tas2781_hda.h diff --git a/sound/pci/hda/tas2781_hda.h b/sound/pci/hda/tas2781_hda.h new file mode 100644 index 000000000000..c57909c0ed65 --- /dev/null +++ b/sound/pci/hda/tas2781_hda.h @@ -0,0 +1,42 @@ +/* SPDX-License-Identifier: GPL-2.0-only + * + * HDA audio driver for Texas Instruments TAS2781 smart amp + * + * Copyright (C) 2025 Texas Instruments, Inc. + */ +#ifndef __TAS2781_HDA_H__ +#define __TAS2781_HDA_H__ + +/* + * No standard control callbacks for SNDRV_CTL_ELEM_IFACE_CARD + * Define two controls, one is Volume control callbacks, the other is + * flag setting control callbacks. + */ + +/* Volume control callbacks for tas2781 */ +#define ACARD_SINGLE_RANGE_EXT_TLV(xname, xreg, xshift, xmin, xmax, xinvert, \ + xhandler_get, xhandler_put, tlv_array) { \ + .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = (xname), \ + .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \ + SNDRV_CTL_ELEM_ACCESS_READWRITE, \ + .tlv.p = (tlv_array), \ + .info = snd_soc_info_volsw, \ + .get = xhandler_get, .put = xhandler_put, \ + .private_value = (unsigned long)&(struct soc_mixer_control) { \ + .reg = xreg, .rreg = xreg, \ + .shift = xshift, .rshift = xshift,\ + .min = xmin, .max = xmax, .invert = xinvert, \ + } \ +} + +/* Flag control callbacks for tas2781 */ +#define ACARD_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) { \ + .iface = SNDRV_CTL_ELEM_IFACE_CARD, \ + .name = xname, \ + .info = snd_ctl_boolean_mono_info, \ + .get = xhandler_get, \ + .put = xhandler_put, \ + .private_value = xdata, \ +} + +#endif diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c index 29dc4f500580..9d94ae5fcfe0 100644 --- a/sound/pci/hda/tas2781_hda_i2c.c +++ b/sound/pci/hda/tas2781_hda_i2c.c @@ -2,7 +2,7 @@ // // TAS2781 HDA I2C driver // -// Copyright 2023 - 2024 Texas Instruments, Inc. +// Copyright 2023 - 2025 Texas Instruments, Inc. // // Author: Shenghao Ding <shenghao-ding(a)ti.com> // Current maintainer: Baojun Xu <baojun.xu(a)ti.com> @@ -30,35 +30,10 @@ #include "hda_component.h" #include "hda_jack.h" #include "hda_generic.h" +#include "tas2781_hda.h" #define TASDEVICE_SPEAKER_CALIBRATION_SIZE 20 -/* No standard control callbacks for SNDRV_CTL_ELEM_IFACE_CARD - * Define two controls, one is Volume control callbacks, the other is - * flag setting control callbacks. - */ - -/* Volume control callbacks for tas2781 */ -#define ACARD_SINGLE_RANGE_EXT_TLV(xname, xreg, xshift, xmin, xmax, xinvert, \ - xhandler_get, xhandler_put, tlv_array) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = (xname),\ - .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\ - SNDRV_CTL_ELEM_ACCESS_READWRITE,\ - .tlv.p = (tlv_array), \ - .info = snd_soc_info_volsw, \ - .get = xhandler_get, .put = xhandler_put, \ - .private_value = (unsigned long)&(struct soc_mixer_control) \ - {.reg = xreg, .rreg = xreg, .shift = xshift, \ - .rshift = xshift, .min = xmin, .max = xmax, \ - .invert = xinvert} } - -/* Flag control callbacks for tas2781 */ -#define ACARD_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = xname, \ - .info = snd_ctl_boolean_mono_info, \ - .get = xhandler_get, .put = xhandler_put, \ - .private_value = xdata } - enum calib_data { R0_VAL = 0, INV_R0, diff --git a/sound/pci/hda/tas2781_hda_spi.c b/sound/pci/hda/tas2781_hda_spi.c index 399f2e4c3b62..c6be2be1b53e 100644 --- a/sound/pci/hda/tas2781_hda_spi.c +++ b/sound/pci/hda/tas2781_hda_spi.c @@ -2,7 +2,7 @@ // // TAS2781 HDA SPI driver // -// Copyright 2024 Texas Instruments, Inc. +// Copyright 2024 - 2025 Texas Instruments, Inc. // // Author: Baojun Xu <baojun.xu(a)ti.com> @@ -38,38 +38,7 @@ #include "hda_component.h" #include "hda_jack.h" #include "hda_generic.h" - -/* - * No standard control callbacks for SNDRV_CTL_ELEM_IFACE_CARD - * Define two controls, one is Volume control callbacks, the other is - * flag setting control callbacks. - */ - -/* Volume control callbacks for tas2781 */ -#define ACARD_SINGLE_RANGE_EXT_TLV(xname, xreg, xshift, xmin, xmax, xinvert, \ - xhandler_get, xhandler_put, tlv_array) { \ - .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = (xname), \ - .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \ - SNDRV_CTL_ELEM_ACCESS_READWRITE, \ - .tlv.p = (tlv_array), \ - .info = snd_soc_info_volsw, \ - .get = xhandler_get, .put = xhandler_put, \ - .private_value = (unsigned long)&(struct soc_mixer_control) { \ - .reg = xreg, .rreg = xreg, \ - .shift = xshift, .rshift = xshift,\ - .min = xmin, .max = xmax, .invert = xinvert, \ - } \ -} - -/* Flag control callbacks for tas2781 */ -#define ACARD_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) { \ - .iface = SNDRV_CTL_ELEM_IFACE_CARD, \ - .name = xname, \ - .info = snd_ctl_boolean_mono_info, \ - .get = xhandler_get, \ - .put = xhandler_put, \ - .private_value = xdata, \ -} +#include "tas2781_hda.h" struct tas2781_hda { struct tasdevice_priv *priv; -- 2.34.1

2 1

ucm2: Qualcomm: add Lenovo ThinkBook 16 support
by GitHub pull_request - opened 08 Apr '25

08 Apr '25

alsa-project/alsa-ucm-conf pull request #543 was opened from jglathe: add a Regex string, seems compatible with Thinkpad T14s Tested-by: Jens Glathe <jens.glathe(a)oldschoolsolutions.biz> Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/543 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/543.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Fireworks Alsa Driver Buffer SIze
by jayt0808＠gmail.com 08 Apr '25

08 Apr '25

Hi I'm using an AudioFire 8a that has 16 channels over the firewire bus and the snd-fireworks alsa firewire driver. In Jack, when I set Frames/Period to anything higher than 64, alsa fails with an error saying Mon Apr 7 22:15:35 2025: ERROR: ALSA: cannot set hardware parameters for capture Mon Apr 7 22:15:35 2025: ERROR: ALSA: cannot configure capture channel I noticed that the output of "aplay -D hw:1,0 --dump-hw-params /dev/zero" indicated the following alsa settings: Playing raw data '/dev/zero' : Unsigned 8 bit, Rate 8000 Hz, Mono HW Params of device "hw:1,0": -------------------- ACCESS: MMAP_INTERLEAVED RW_INTERLEAVED FORMAT: S32_LE SUBFORMAT: STD SAMPLE_BITS: 32 FRAME_BITS: [384 512] CHANNELS: [12 16] RATE: [32000 96000] PERIOD_TIME: [250 32000] PERIOD_SIZE: [16 2720] PERIOD_BYTES: [768 131072] PERIODS: [2 341] BUFFER_TIME: (333 170500] BUFFER_SIZE: [32 5456] BUFFER_BYTES: [1536 262144] TICK_TIME: ALL -------------------- aplay: set_params:1371: Sample format non available Available formats: - S32_LE I was concerned that the BUFFER_SIZE was too small to support 16 channels at a 128 Frames/Period size. But when I modded the driver to increase this figure, it did not fix the issue. Anyone have any insight on this issue? Running Ubuntu 24.04 with kernel 6.8.0-57-lowlatency. Everything seems to work fine when I set 64 Frames/Period (except the occasional annoying stuttering that one can expect in that scenario; with a buffer that is too small to support the system load). Thanks Jay

1 0

[PATCH v2] ASoC: dwc: always enable/disable i2s irqs
by Brady Norander 08 Apr '25

08 Apr '25

Commit a42e988 ("ASoC: dwc: add DMA handshake control") changed the behavior of the driver to not enable or disable i2s irqs if using DMA. This breaks platforms such as AMD ACP. Audio playback appears to work but no audio can be heard. Revert to the old behavior by always enabling and disabling i2s irqs while keeping DMA handshake control. Fixes: a42e988 ("ASoC: dwc: add DMA handshake control") Signed-off-by: Brady Norander <bradynorander(a)gmail.com> --- v2: reword commit message to better describe the issue --- sound/soc/dwc/dwc-i2s.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/sound/soc/dwc/dwc-i2s.c b/sound/soc/dwc/dwc-i2s.c index 57b789d7fbed..5b4f20dbf7bb 100644 --- a/sound/soc/dwc/dwc-i2s.c +++ b/sound/soc/dwc/dwc-i2s.c @@ -199,12 +199,10 @@ static void i2s_start(struct dw_i2s_dev *dev, else i2s_write_reg(dev->i2s_base, IRER, 1); - /* I2S needs to enable IRQ to make a handshake with DMAC on the JH7110 SoC */ - if (dev->use_pio || dev->is_jh7110) - i2s_enable_irqs(dev, substream->stream, config->chan_nr); - else + if (!(dev->use_pio || dev->is_jh7110)) i2s_enable_dma(dev, substream->stream); + i2s_enable_irqs(dev, substream->stream, config->chan_nr); i2s_write_reg(dev->i2s_base, CER, 1); } @@ -218,11 +216,12 @@ static void i2s_stop(struct dw_i2s_dev *dev, else i2s_write_reg(dev->i2s_base, IRER, 0); - if (dev->use_pio || dev->is_jh7110) - i2s_disable_irqs(dev, substream->stream, 8); - else + if (!(dev->use_pio || dev->is_jh7110)) i2s_disable_dma(dev, substream->stream); + i2s_disable_irqs(dev, substream->stream, 8); + + if (!dev->active) { i2s_write_reg(dev->i2s_base, CER, 0); i2s_write_reg(dev->i2s_base, IER, 0); -- 2.49.0

2 1

pcm: hw: do not reset tstamp_type in SND_PCM_APPEND mode
by GitHub pull_request - opened 06 Apr '25

06 Apr '25

alsa-project/alsa-lib pull request #450 was opened from kgroeneveld: When the first client of plugins such as dshare open the hw device they set a default tstamp_type in snd_pcm_direct_initialize_slave based on tstamp_type from the config file. But when subsequent clients open the same plugin the snd_pcm_hw_open_fd function clobbers this default. Request URL : https://github.com/alsa-project/alsa-lib/pull/450 Patch URL : https://github.com/alsa-project/alsa-lib/pull/450.patch Repository URL: https://github.com/alsa-project/alsa-lib

1 0

alsaseq: Fix type check in set_time()
by GitHub pull_request - opened 06 Apr '25

06 Apr '25

alsa-project/alsa-python pull request #17 was opened from ernestask: SeqEvent_set_time() has fallen victim to the inverted get_long1() return value here, erroring out when called with actual integers. Request URL : https://github.com/alsa-project/alsa-python/pull/17 Patch URL : https://github.com/alsa-project/alsa-python/pull/17.patch Repository URL: https://github.com/alsa-project/alsa-python

1 0

envy24control: port to GTK 3
by GitHub pull_request - opened 05 Apr '25

05 Apr '25

alsa-project/alsa-tools pull request #35 was opened from andreas56: This is a port envy24control from GTK 2 to GTK 3. Note: There is another very similar port in #27, but that one isn't quite finished. I did my port before noticing that there already was one, but I have compared them now to check that I didn't miss anything. My version has more changes, as I wanted to avoid using deprecated GTK functions. It also fixes the rendering of the level meters and optimizes it a bit so the CPU load isn't much higher than it was in GTK 2. Note 2: the fix from #31 is included in this pull request, as it is necessary for the spin buttons to work in GTK 3. Note 3: my other envy24control pull requests are not included here, as they are not related to GTK 3. #29 will probably cause merge conflicts with this one, but I will fix them if you decide to merge any of the pull requests. Request URL : https://github.com/alsa-project/alsa-tools/pull/35 Patch URL : https://github.com/alsa-project/alsa-tools/pull/35.patch Repository URL: https://github.com/alsa-project/alsa-tools

1 0

ALC4080 - general discussion (driver support)
by GitHub issues - edited 04 Apr '25

04 Apr '25

alsa-project/alsa-ucm-conf issue #541 was edited from perexg: UCM cannot add basic functionalities when the driver does not expose them. I already explained situation in [kernel bugzilla](https://bugzilla.kernel.org/show_bug.cgi?id=218913). **Note** This issue is for the kernel driver related problems. If the driver works and something is missing in UCM configuration, please, create a new issue in this tracker. It may be difficult to distinguish the right place, but if the developers redirected you here, follow the instructions bellow. **For issues like** 1. jack functionality assignment is unstable (jack functionality is not fixed - e.g. changes on warm reboot from windows) 2. low microphone volume (which cannot be controlled using native ALSA mixer controls) 3. sound is activated only after some magic plug/unplug sequence **Further steps** Try to analyze the audio driver using direct ALSA API. See [DEBUG.md](https://github.com/alsa-project/alsa-ucm-conf/blob/master/ucm2/DE…. Very nice report is in #528. Please, use it as a reference what to do. Developers usually do not have exact hardware, so observations describing which ALSA PCM device, which ALSA Mixer control, which ALSA Jack control can be used for given playback/capture device are essential. If the functionality cannot be handled with current ALSA audio driver, go to paragraphs bellow. Reverse engineering of the Windows driver. Capture USB communication and save it to a file which can be replayed by [wireshark](https://www.wireshark.org). Try to write an explanation including timing (what happened in given time slots). Driver reports should go to [kernel bugzilla](https://bugzilla.kernel.org). Add a comment with a link here. You may also push hardware vendors to create USB device which fully follows the USB audio specification, so the ALSA driver will work out-of-box (without "quirks"). **Documentation links** The documentation is not complete. Realtek support is generally very limited to provide full specification to their codecs / audio chips those years. They are providing details only to hardware vendors with a contract. If you know more, please, let us know. - [ALC4080 block scheme](https://bugzilla.kernel.org/attachment.cgi?id=306370) - [ALC4080 datasheet](https://bugzilla.kernel.org/attachment.cgi?id=307224) **Some details** ALC4080 is USB codec, thus it exposes functionality through the USB bus. The block scheme is nice to know internals, but look to the MCU paragraph in the datasheet: ``` 2.1.2. Micro Controller Unit - On-chip high-performance and low-power MCU - Ultra-low power consumption when MCU is at idle state - MCU controls connection to USB bus for re-enumeration without hot-plug - Internal programmable memory support for customized audio function - Watchdog control for MCU reset and interrupt - Configurable VID (Vendor ID), PID (Product ID), and serial number string ``` This means, that the internal firmware for this MCU unit can change the behaviour of audio hardware. Usually, the firmware is vendor specific. The USB audio hardware should comply with the USB Audio specification (refer https://www.usb.org/). The control units parsed by the ALSA driver can be obtained using 'cat /proc/asound/cardX/usbmixer' command (replace X with the correct ALSA card number). Those units are mapped to the standard mixer controls. My guess is that the firmware is not complaint with the USB audio specification and some functionality is controlled using specific USB handshake (data blocks). Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/541 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

ALC4080 - general discussion (driver support)
by GitHub issues - edited 04 Apr '25

04 Apr '25

alsa-project/alsa-ucm-conf issue #541 was edited from perexg: UCM cannot add basic functionalities when the driver does not expose them. I already explained situation in [kernel bugzilla](https://bugzilla.kernel.org/show_bug.cgi?id=218913). **Note** This issue is for the kernel driver related problems. If the driver works and something is missing in UCM configuration, please, create a new issue in this tracker. It may be difficult to distinguish the right place, but if the developers redirected you here, follow the instructions bellow. **For issues like** 1. jack functionality assignment is unstable (jack functionality is not fixed - e.g. changes on warm reboot from windows) 2. low microphone volume (which cannot be controlled using native ALSA mixer controls) 3. sound is activated only after some magic plug/unplug sequence **Further steps** Try to analyze the audio driver using direct ALSA API. See [DEBUG.md](https://github.com/alsa-project/alsa-ucm-conf/blob/master/ucm2/DE…. Very nice report is in #528. Please, use it as a reference what to do. Developers usually do not have exact hardware, so observations describing which ALSA PCM device, which ALSA Mixer control, which ALSA Jack control can be used for given playback/capture device are essential. Reverse engineering of the Windows driver. Capture USB communication and save it to a file which can be replayed by [wireshark](https://www.wireshark.org). Try to write an explanation including timing (what happened in given time slots). Driver reports should go to [kernel bugzilla](https://bugzilla.kernel.org). Add a comment with a link here. You may also push hardware vendors to create USB device which fully follows the USB audio specification, so the ALSA driver will work out-of-box (without "quirks"). **Documentation links** The documentation is not complete. Realtek support is generally very limited to provide full specification to their codecs / audio chips those years. They are providing details only to hardware vendors with a contract. If you know more, please, let us know. - [ALC4080 block scheme](https://bugzilla.kernel.org/attachment.cgi?id=306370) - [ALC4080 datasheet](https://bugzilla.kernel.org/attachment.cgi?id=307224) **Some details** ALC4080 is USB codec, thus it exposes functionality through the USB bus. The block scheme is nice to know internals, but look to the MCU paragraph in the datasheet: ``` 2.1.2. Micro Controller Unit - On-chip high-performance and low-power MCU - Ultra-low power consumption when MCU is at idle state - MCU controls connection to USB bus for re-enumeration without hot-plug - Internal programmable memory support for customized audio function - Watchdog control for MCU reset and interrupt - Configurable VID (Vendor ID), PID (Product ID), and serial number string ``` This means, that the internal firmware for this MCU unit can change the behaviour of audio hardware. Usually, the firmware is vendor specific. The USB audio hardware should comply with the USB Audio specification (refer https://www.usb.org/). The control units parsed by the ALSA driver can be obtained using 'cat /proc/asound/cardX/usbmixer' command (replace X with the correct ALSA card number). Those units are mapped to the standard mixer controls. My guess is that the firmware is not complaint with the USB audio specification and some functionality is controlled using specific USB handshake (data blocks). Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/541 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

ALC4080 - general discussion (driver support)
by GitHub issues - edited 04 Apr '25

04 Apr '25

alsa-project/alsa-ucm-conf issue #541 was edited from perexg: UCM cannot add basic functionalities when the driver does not expose them. I already explained situation in [kernel bugzilla](https://bugzilla.kernel.org/show_bug.cgi?id=218913). **Note** This issue is for the kernel driver related problems. If the driver works and something is missing in UCM configuration, please, create a new issue in this tracker. It may be difficult to distinguish the right place, but if the developers redirected you here, follow the instructions bellow. **For issues like** 1. jack functionality assignment is unstable (jack functionality is not fixed - e.g. changes on warm reboot from windows) 2. low microphone volume (which cannot be controlled using native ALSA mixer controls) 3. sound is activated only after some magic plug/unplug sequence **Further steps** Try to analyze the audio driver using direct ALSA API. See [DEBUG.md](https://github.com/alsa-project/alsa-ucm-conf/blob/master/ucm2/DE…. Very nice report is in #528. Please, use it as a reference what to do. Developers usually do not have exact hardware, so observations describing which ALSA PCM device, which ALSA Mixer control, which ALSA Jack control can be used for given playback/capture device is essential. Reverse engineering of the Windows driver. Capture USB communication and save it to a file which can be replayed by [wireshark](https://www.wireshark.org). Try to write an explanation including timing (what happened in given time slots). Driver reports should go to [kernel bugzilla](https://bugzilla.kernel.org). Add a comment with a link here. You may also push hardware vendors to create USB device which fully follows the USB audio specification, so the ALSA driver will work out-of-box (without "quirks"). **Documentation links** The documentation is not complete. Realtek support is generally very limited to provide full specification to their codecs / audio chips those years. They are providing details only to hardware vendors with a contract. If you know more, please, let us know. - [ALC4080 block scheme](https://bugzilla.kernel.org/attachment.cgi?id=306370) - [ALC4080 datasheet](https://bugzilla.kernel.org/attachment.cgi?id=307224) **Some details** ALC4080 is USB codec, thus it exposes functionality through the USB bus. The block scheme is nice to know internals, but look to the MCU paragraph in the datasheet: ``` 2.1.2. Micro Controller Unit - On-chip high-performance and low-power MCU - Ultra-low power consumption when MCU is at idle state - MCU controls connection to USB bus for re-enumeration without hot-plug - Internal programmable memory support for customized audio function - Watchdog control for MCU reset and interrupt - Configurable VID (Vendor ID), PID (Product ID), and serial number string ``` This means, that the internal firmware for this MCU unit can change the behaviour of audio hardware. Usually, the firmware is vendor specific. The USB audio hardware should comply with the USB Audio specification (refer https://www.usb.org/). The control units parsed by the ALSA driver can be obtained using 'cat /proc/asound/cardX/usbmixer' command (replace X with the correct ALSA card number). Those units are mapped to the standard mixer controls. My guess is that the firmware is not complaint with the USB audio specification and some functionality is controlled using specific USB handshake (data blocks). Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/541 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

ucm2: sof-soundwire: Correct include file path for dsp.conf
by GitHub pull_request - opened 04 Apr '25

04 Apr '25

alsa-project/alsa-ucm-conf pull request #542 was opened from ujfalusi: The file path must be given as absolut and not relative, otherwise the dsp.conf file will not be found: $ alsaucm dump text ALSA lib utils.c:364:(uc_mgr_config_load_into) could not open configuration file /usr/share/alsa/ucm2/conf.d/sof-soundwire/../Intel/sof-hda-dsp/dsp.conf ALSA lib parser.c:78:(uc_mgr_config_load_file) error: failed to open file /usr/share/alsa/ucm2/conf.d/sof-soundwire/../Intel/sof-hda-dsp/dsp.conf: -2 ALSA lib main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 alsaucm: error failed to open sound card hw:0: No such file or directory Fixes: c9d1f7eafa6c ("UCM2: sof-soundwire: Enable DRC and equalizers for") Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/542 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/542.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

USB-Audio: Add Roland BridgeCast One | adapted
by GitHub pull_request - edited 03 Apr '25

03 Apr '25

alsa-project/alsa-ucm-conf pull request #536 was edited from Simon99de: Add Roland BridgeCast One uses the same config as the bridge cast v2 as it has the same outputs and it worked in my test. 0582:030d Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/536 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/536.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Alsa lib is not able to find the UCM .conf files
by GitHub issues - opened 03 Apr '25

03 Apr '25

alsa-project/alsa-lib issue #449 was opened from 3bitbrain: Note : the sound card is a Xonar DX ( AV200 ) The alsa UCM files are installed at PATH=/usr/share/alsa When I try to start alsasound, I get this error == ` alsa-lib-1.2.11/src/umc/main.c:1554: (snd_use_case_mgr_open) error : failed to import hw:1 use case configuration -2 ` The CMD alsaucm listcards gets this response : list is empty. [alsa-info.txt](https://github.com/alsa-project/alsa-ucm-conf/files/15455180… [aplay-info.txt](https://github.com/alsa-project/alsa-ucm-conf/files/1545518… Issue URL : https://github.com/alsa-project/alsa-lib/issues/449 Repository URL: https://github.com/alsa-project/alsa-lib

1 0

ALC4080 - general discussion (driver support)
by GitHub issues - edited 03 Apr '25

03 Apr '25

alsa-project/alsa-ucm-conf issue #541 was edited from perexg: UCM cannot add basic functionalities when the driver does not expose them. I already explained situation in [kernel bugzilla](https://bugzilla.kernel.org/show_bug.cgi?id=218913). **Note** This issue is for the kernel driver related problems. If the driver works and something is missing in UCM configuration, please, create a new issue in this tracker. It may be difficult to distinguish the right place, but if the developers redirected you here, follow the instructions bellow. **For issues like** 1. jack functionality assignment is unstable (jack functionality is not fixed - e.g. changes on warm reboot from windows) 2. low microphone volume (which cannot be controlled using native ALSA mixer controls) 3. sound is activated only after some magic plug/unplug sequence **Further steps** Try to analyze the audio driver using direct ALSA API. See [DEBUG.md](https://github.com/alsa-project/alsa-ucm-conf/blob/master/ucm2/DE…. Very nice report is in #528. Please, use it as a reference what to do. Reverse engineering of the Windows driver. Capture USB communication and save it to a file which can be replayed by [wireshark](https://www.wireshark.org). Try to write an explanation including timing (what happened in given time slots). Driver reports should go to [kernel bugzilla](https://bugzilla.kernel.org). Add a comment with a link here. You may also push hardware vendors to create USB device which fully follows the USB audio specification, so the ALSA driver will work out-of-box (without "quirks"). **Documentation links** The documentation is not complete. Realtek support is generally very limited to provide full specification to their codecs / audio chips those years. They are providing details only to hardware vendors with a contract. If you know more, please, let us know. - [ALC4080 block scheme](https://bugzilla.kernel.org/attachment.cgi?id=306370) - [ALC4080 datasheet](https://bugzilla.kernel.org/attachment.cgi?id=307224) **Some details** ALC4080 is USB codec, thus it exposes functionality through the USB bus. The block scheme is nice to know internals, but look to the MCU paragraph in the datasheet: ``` 2.1.2. Micro Controller Unit - On-chip high-performance and low-power MCU - Ultra-low power consumption when MCU is at idle state - MCU controls connection to USB bus for re-enumeration without hot-plug - Internal programmable memory support for customized audio function - Watchdog control for MCU reset and interrupt - Configurable VID (Vendor ID), PID (Product ID), and serial number string ``` This means, that the internal firmware for this MCU unit can change the behaviour of audio hardware. Usually, the firmware is vendor specific. The USB audio hardware should comply with the USB Audio specification (refer https://www.usb.org/). The control units parsed by the ALSA driver can be obtained using 'cat /proc/asound/cardX/usbmixer' command (replace X with the correct ALSA card number). Those units are mapped to the standard mixer controls. My guess is that the firmware is not complaint with the USB audio specification and some functionality is controlled using specific USB handshake (data blocks). Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/541 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

ALC4080 - general discussion (driver support)
by GitHub issues - edited 03 Apr '25

03 Apr '25

alsa-project/alsa-ucm-conf issue #541 was edited from perexg: UCM cannot add basic functionalities when the driver does not expose them. I already explained situation in [kernel bugzilla](https://bugzilla.kernel.org/show_bug.cgi?id=218913). **Note** This issue is for the kernel driver related problems. If the driver works and something is missing in UCM configuration, please, create a new issue in this tracker. It may be difficult to distinguish the right place, but if the developers redirected you here, follow the instructions bellow. **For issues like** 1. jack functionality assignment is unstable (jack functionality is not fixed - e.g. changes on warm reboot from windows) 2. low microphone volume (which cannot be controlled using native ALSA mixer controls) 3. sound is activated only after some magic plug/unplug sequence **Further steps** Try to analyze the audio driver using direct ALSA API. See [DEBUG.md](https://github.com/alsa-project/alsa-ucm-conf/blob/master/ucm2/DE…. Very nice report is in #528. Please, use it as a reference what to do. Reverse engineering of the Windows driver. Capture USB communication and save it to a file which can be replayed by [wireshark] (https://www.wireshark.org). Try to write an explanation including timing (what happened in given time slots). Driver reports should go to [kernel bugzilla](https://bugzilla.kernel.org). Add a comment with a link here. You may also push hardware vendors to create USB device which fully follows the USB audio specification, so the ALSA driver will work out-of-box (without "quirks"). **Documentation links** The documentation is not complete. Realtek support is generally very limited to provide full specification to their codecs / audio chips those years. They are providing details only to hardware vendors with a contract. If you know more, please, let us know. - [ALC4080 block scheme](https://bugzilla.kernel.org/attachment.cgi?id=306370) - [ALC4080 datasheet](https://bugzilla.kernel.org/attachment.cgi?id=307224) **Some details** ALC4080 is USB codec, thus it exposes functionality through the USB bus. The block scheme is nice to know internals, but look to the MCU paragraph in the datasheet: ``` 2.1.2. Micro Controller Unit - On-chip high-performance and low-power MCU - Ultra-low power consumption when MCU is at idle state - MCU controls connection to USB bus for re-enumeration without hot-plug - Internal programmable memory support for customized audio function - Watchdog control for MCU reset and interrupt - Configurable VID (Vendor ID), PID (Product ID), and serial number string ``` This means, that the internal firmware for this MCU unit can change the behaviour of audio hardware. Usually, the firmware is vendor specific. The USB audio hardware should comply with the USB Audio specification (refer https://www.usb.org/). The control units parsed by the ALSA driver can be obtained using 'cat /proc/asound/cardX/usbmixer' command (replace X with the correct ALSA card number). Those units are mapped to the standard mixer controls. My guess is that the firmware is not complaint with the USB audio specification and some functionality is controlled using specific USB handshake (data blocks). Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/541 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

ALC4080 - general discussion (driver support)
by GitHub issues - opened 03 Apr '25

03 Apr '25

alsa-project/alsa-ucm-conf issue #541 was opened from perexg: UCM cannot add basic functionalities when the driver does not expose them. I already explained situation in [kernel bugzilla](https://bugzilla.kernel.org/show_bug.cgi?id=218913). **For issues like** 1. jack functionality assignment is unstable (jack functionality is not fixed - e.g. changes on warm reboot from windows) 2. low microphone volume (which cannot be controlled using native ALSA mixer controls) 3. sound is activated only after some magic plug/unplug sequence **Further steps** Try to analyze the audio driver using direct ALSA API. See [DEBUG.md](https://github.com/alsa-project/alsa-ucm-conf/blob/master/ucm2/DE…. Very nice report is in #528. Please, use it as a reference what to do. Reverse engineering of the Windows driver. Capture USB communication and save it to a file which can be replayed by [wireshark] (https://www.wireshark.org). Try to write an explanation including timing (what happened in given time slots). Driver reports should go to [kernel bugzilla](https://bugzilla.kernel.org). Add a comment with a link here. You may also push hardware vendors to create USB device which fully follows the USB audio specification, so the ALSA driver will work out-of-box (without "quirks"). **Documentation links** The documentation is not complete. Realtek support is generally very limited to provide full specification to their codecs / audio chips those years. They are providing details only to hardware vendors with a contract. If you know more, please, let us know. - [ALC4080 block scheme](https://bugzilla.kernel.org/attachment.cgi?id=306370) - [ALC4080 datasheet](https://bugzilla.kernel.org/attachment.cgi?id=307224) **Some details** ALC4080 is USB codec, thus it exposes functionality through the USB bus. The block scheme is nice to know internals, but look to the MCU paragraph in the datasheet: ``` 2.1.2. Micro Controller Unit - On-chip high-performance and low-power MCU - Ultra-low power consumption when MCU is at idle state - MCU controls connection to USB bus for re-enumeration without hot-plug - Internal programmable memory support for customized audio function - Watchdog control for MCU reset and interrupt - Configurable VID (Vendor ID), PID (Product ID), and serial number string ``` This means, that the internal firmware for this MCU unit can change the behaviour of audio hardware. Usually, the firmware is vendor specific. The USB audio hardware should comply with the USB Audio specification (refer https://www.usb.org/). The control units parsed by the ALSA driver can be obtained using 'cat /proc/asound/cardX/usbmixer' command (replace X with the correct ALSA card number). Those units are mapped to the standard mixer controls. My guess is that the firmware is not complaint with the USB audio specification and some functionality is controlled using specific USB handshake (data blocks). Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/541 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Delete alsalisp code
by GitHub pull_request - opened 02 Apr '25

02 Apr '25

alsa-project/alsa-lib pull request #448 was opened from fragglet: Install of the alsalisp binary has been disabled since 2006 (in commit 8d382ccd), and building of it was disabled by default in 2018 (in commit 32ceab21), so it is reasonable to assume that nobody is using it. Use within the alsa-lib project is limited to an aliases file that looks like it is intended as an example, plus some very small .alisp files associated with the SiS SI7018 PCI sound card which has not been manufactured in years. These too have not been installed since 2018 when commit 32ceab21 disabled building of the alsalisp binary. In preparing this change, I searched the Github issue tracker for "lisp", "alisp" and "alsalisp", and found no complaints about the above changes. I also did a Github code search for projects that might be including the `alisp.h` header and found none. Therefore I think this code can be safely deleted and nobody is likely to object. Request URL : https://github.com/alsa-project/alsa-lib/pull/448 Patch URL : https://github.com/alsa-project/alsa-lib/pull/448.patch Repository URL: https://github.com/alsa-project/alsa-lib

1 0

sof-soundwire: cs42l43: Switch mixer based on output volume
by GitHub pull_request - opened 02 Apr '25

02 Apr '25

alsa-project/alsa-ucm-conf pull request #540 was opened from mstrozek: Hardware volume control in cs42l43 can go up to +31.5dB which can cause audio degradation. For best results, limit hardware volume to 0dB. Link: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/4622 Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/540 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/540.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[GIT PULL] ASoC fixes for v6.15-merge-window
by Mark Brown 02 Apr '25

02 Apr '25

The following changes since commit 9ef52d529bb75071e03cf85078f724d69c4abe89: ASoC: SDCA: Correct handling of selected mode DisCo property (2025-03-21 15:45:25 +0000) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git tags/asoc-fix-v6.15-merge-window for you to fetch changes up to 93d34608fd162f725172e780b1c60cc93a920719: ASoC: imx-card: Add NULL check in imx_card_probe() (2025-04-01 17:01:10 +0100) ---------------------------------------------------------------- ASoC: Fixes for v6.15 A relatively large set of fixes that came in since the release, mostly for Qualcomm platforms. The biggest block of fixes is the set from Srini which fixes various quality and glitching issues on AudioReach systems. ---------------------------------------------------------------- Alexey Klimov (1): ASoC: qdsp6: q6asm-dai: fix q6asm_dai_compr_set_params error path Christophe JAILLET (1): ASoC: codecs: rt5665: Fix some error handling paths in rt5665_probe() Dan Carpenter (1): ASoC: sma1307: Fix error handling in sma1307_setting_loaded() Henry Martin (1): ASoC: imx-card: Add NULL check in imx_card_probe() Krzysztof Kozlowski (2): ASoC: codecs: wsa883x: Correct VI sense channel mask ASoC: codecs: wsa884x: Correct VI sense channel mask Mark Brown (2): ASoC: codecs: wsa88xx: Correct VI sense channel mask ASoC: q6apm: fix under runs and fragment sizes Peter Ujfalusi (1): ASoC: SOF: hda/ptl: Move mic privacy change notification sending to a work Richard Fitzgerald (1): firmware: cs_dsp: Ensure cs_dsp_load[_coeff]() returns 0 on success Srinivas Kandagatla (5): ASoC: q6apm-dai: schedule all available frames to avoid dsp under-runs ASoC: q6apm: add q6apm_get_hw_pointer helper ASoC: qdsp6: q6apm-dai: set 10 ms period and buffer alignment. ASoC: qdsp6: q6apm-dai: fix capture pipeline overruns. ASoC: q6apm-dai: make use of q6apm_get_hw_pointer drivers/firmware/cirrus/cs_dsp.c | 2 ++ sound/soc/codecs/rt5665.c | 24 +++------------- sound/soc/codecs/sma1307.c | 11 ++------ sound/soc/codecs/wsa883x.c | 2 +- sound/soc/codecs/wsa884x.c | 2 +- sound/soc/fsl/imx-card.c | 4 +++ sound/soc/qcom/qdsp6/q6apm-dai.c | 60 +++++++++++++++++++++------------------- sound/soc/qcom/qdsp6/q6apm.c | 18 +++++++++++- sound/soc/qcom/qdsp6/q6apm.h | 3 ++ sound/soc/qcom/qdsp6/q6asm-dai.c | 19 +++++++++---- sound/soc/sof/intel/hda-dsp.c | 8 ++++++ sound/soc/sof/intel/hda.c | 4 +++ sound/soc/sof/intel/hda.h | 8 ++++++ sound/soc/sof/intel/ptl.c | 33 +++++++++++++++++++--- 14 files changed, 128 insertions(+), 70 deletions(-)

2 1

Support mute led function for HP platform
by Kailang 02 Apr '25

02 Apr '25

Hi Takashi, Attach was fixed mute led no function with HP platform. Many Thanks. BR, Kailang

2 1

aplay: add support for G.711 A_LAW enconding in AU file format
by GitHub pull_request - opened 02 Apr '25

02 Apr '25

alsa-project/alsa-utils pull request #297 was opened from chleroy: At the time being, aplay only supports G.711 µ-law, 8-bits PCM and 16-bits PCM encodings for the AU format while the AU format supports many more. In Europe the most G.711 used encoding is the A-law, which is also part of the encodings supported by the AU file format. Add support for that encoding in aplay. Request URL : https://github.com/alsa-project/alsa-utils/pull/297 Patch URL : https://github.com/alsa-project/alsa-utils/pull/297.patch Repository URL: https://github.com/alsa-project/alsa-utils

1 0

[PATCH alsa-ucm-conf 1/2] sof-soundwire: cs42l43: Drop headset mic from mic mute LED
by Maciej Strozek 01 Apr '25

01 Apr '25

As per conversation in [1], let headsets be dropped from LED bindings. Also remove turning off the mics on device disable since they are now not needed. [1]: https://github.com/alsa-project/alsa-ucm-conf/pull/512 Signed-off-by: Maciej Strozek <mstrozek(a)opensource.cirrus.com> --- ucm2/codecs/cs42l43/init.conf | 6 ------ ucm2/sof-soundwire/cs42l43-dmic.conf | 2 -- ucm2/sof-soundwire/cs42l43.conf | 1 - 3 files changed, 9 deletions(-) diff --git a/ucm2/codecs/cs42l43/init.conf b/ucm2/codecs/cs42l43/init.conf index 0e987c21..c0fa863c 100644 --- a/ucm2/codecs/cs42l43/init.conf +++ b/ucm2/codecs/cs42l43/init.conf @@ -10,9 +10,3 @@ LibraryConfig.remap.Config { } } } - -BootSequence [ - cset "name='cs42l43 Decimator 1 Switch' 0" -] - -Macro [{ SetLED { LED="mic" Action="attach" CtlId="cs42l43 Decimator 1 Switch" } }] diff --git a/ucm2/sof-soundwire/cs42l43-dmic.conf b/ucm2/sof-soundwire/cs42l43-dmic.conf index 70ce40ff..b68a70d1 100644 --- a/ucm2/sof-soundwire/cs42l43-dmic.conf +++ b/ucm2/sof-soundwire/cs42l43-dmic.conf @@ -13,8 +13,6 @@ SectionDevice."Mic" { ] DisableSequence [ - cset "name='cs42l43 Decimator 3 Switch' 0" - cset "name='cs42l43 Decimator 4 Switch' 0" cset "name='cs42l43 DP1TX1 Input' 'None'" cset "name='cs42l43 DP1TX2 Input' 'None'" ] diff --git a/ucm2/sof-soundwire/cs42l43.conf b/ucm2/sof-soundwire/cs42l43.conf index 4b4e1187..51832126 100644 --- a/ucm2/sof-soundwire/cs42l43.conf +++ b/ucm2/sof-soundwire/cs42l43.conf @@ -33,7 +33,6 @@ SectionDevice."Headset" { ] DisableSequence [ - cset "name='cs42l43 Decimator 1 Switch' 0" cset "name='cs42l43 DP2TX1 Input' 'None'" cset "name='cs42l43 DP2TX2 Input' 'None'" ] -- 2.39.5

2 6