August 2024 - Alsa-devel - mailman.alsa-project.org

[PATCH] ASoC: qcom: soundwire: Add support for controlling audio CGCR from HLOS
by Srinivasa Rao Mandadapu 17 Jun '25

17 Jun '25

Add support for controlling soundwire audio CGCR interface using clock framework to make hclk ungating with software. As per new hardware changes, software has to always ungate hclk if soundwire is operational and keep it running. This requirement is for latest LPASS chipsets for RX, TX and WSA path to work. Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam(a)quicinc.com> Co-developed-by: Venkata Prasad Potturu <quic_potturu(a)quicinc.com> Signed-off-by: Venkata Prasad Potturu <quic_potturu(a)quicinc.com> --- This patch set depends on: -- Clock driver patches with reset control support, yet to be posted. drivers/soundwire/qcom.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index fb183bd..440aad8 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -12,6 +12,7 @@ #include <linux/of_irq.h> #include <linux/of_device.h> #include <linux/regmap.h> +#include <linux/reset.h> #include <linux/slab.h> #include <linux/slimbus.h> #include <linux/soundwire/sdw.h> @@ -129,6 +130,7 @@ struct qcom_swrm_ctrl { struct device *dev; struct regmap *regmap; void __iomem *mmio; + struct reset_control *audio_cgcr; #ifdef CONFIG_DEBUG_FS struct dentry *debugfs; #endif @@ -618,6 +620,8 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl) val = FIELD_PREP(SWRM_MCP_FRAME_CTRL_BANK_ROW_CTRL_BMSK, ctrl->rows_index); val |= FIELD_PREP(SWRM_MCP_FRAME_CTRL_BANK_COL_CTRL_BMSK, ctrl->cols_index); + reset_control_reset(ctrl->audio_cgcr); + ctrl->reg_write(ctrl, SWRM_MCP_FRAME_CTRL_BANK_ADDR(0), val); /* Enable Auto enumeration */ @@ -1269,6 +1273,9 @@ static int qcom_swrm_probe(struct platform_device *pdev) ctrl->bus.ops = &qcom_swrm_ops; ctrl->bus.port_ops = &qcom_swrm_port_ops; ctrl->bus.compute_params = &qcom_swrm_compute_params; + ctrl->audio_cgcr = devm_reset_control_get_exclusive(dev, "swr_audio_cgcr"); + if (IS_ERR(ctrl->audio_cgcr)) + dev_err(dev, "Failed to get audio_cgcr reset required for soundwire-v1.6.0\n"); ret = qcom_swrm_get_port_config(ctrl); if (ret) -- 2.7.4

2 3

[PATCH] ASoC: amd: acp: Fix support for a Huawei Matebook laptop
by Marian Postevca 17 Jun '25

17 Jun '25

Previous commit that added support for Huawei MateBook D16 2021 with Ryzen 4600H (HVY-WXX9 M1010) was incomplete. To activate support for this laptop, the DMI table in acp3x-es83xx machine driver must also be updated. Fixes: b5338b1b901e ("ASoC: amd: acp: Add support for a new Huawei Matebook laptop") Signed-off-by: Marian Postevca <posteuca(a)mutex.one> --- sound/soc/amd/acp/acp3x-es83xx/acp3x-es83xx.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/sound/soc/amd/acp/acp3x-es83xx/acp3x-es83xx.c b/sound/soc/amd/acp/acp3x-es83xx/acp3x-es83xx.c index f85b85ea4be9..2b0aa270a3e9 100644 --- a/sound/soc/amd/acp/acp3x-es83xx/acp3x-es83xx.c +++ b/sound/soc/amd/acp/acp3x-es83xx/acp3x-es83xx.c @@ -354,6 +354,14 @@ static const struct dmi_system_id acp3x_es83xx_dmi_table[] = { }, .driver_data = (void *)(ES83XX_ENABLE_DMIC|ES83XX_48_MHZ_MCLK), }, + { + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "HUAWEI"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "HVY-WXX9"), + DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "M1010"), + }, + .driver_data = (void *)(ES83XX_ENABLE_DMIC), + }, { .matches = { DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "HUAWEI"), -- 2.43.0

2 1

[PATCH 0/1] Swapped l/r channels on ThinkBook 13x Gen4
by MadEnvel 28 May '25

28 May '25

Earlier commits introduced audio support for Lenovo ThinBook 13x Gen 4 that needed a patch due to missing _DSD config. Unfortunately, it looks like the left and right channels in the config are swapped. This patch fixes channel assignment. Tested on Lenovo ThinkBook 13x Gen4. MadEnvel (1): Fix swapped left and right channels for Lenovo ThinBook 13x Gen4 sound sound/pci/hda/cs35l41_hda_property.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) -- 2.45.2

4 4

[PATCH 0/9] ALSA: usb-audio: More fixes / improvements on PCM
by Takashi Iwai 22 Apr '25

22 Apr '25

Hi, this is a patch set for USB-audio to fix and improve the PCM stream handling. The primary target is the enhancement of the low-latency playback that was introduced recently for dealing with the small period size (that is used typically by JACK). There are a few other fixes that are relevant with it. The current patches are found in topic/usb-audio branch of sound.git tree, too. Takashi === Takashi Iwai (9): ALSA: usb-audio: Restrict rates for the shared clocks ALSA: usb-audio: Fix possible race at sync of urb completions ALSA: usb-audio: Rename early_playback_start flag with lowlatency_playback ALSA: usb-audio: Disable low-latency playback for free-wheel mode ALSA: usb-audio: Disable low-latency mode for implicit feedback sync ALSA: usb-audio: Check available frames for the next packet size ALSA: usb-audio: Add spinlock to stop_urbs() ALSA: usb-audio: Improved lowlatency playback support ALSA: usb-audio: Avoid killing in-flight URBs during draining sound/usb/card.h | 11 ++- sound/usb/endpoint.c | 230 +++++++++++++++++++++++++++++++------------ sound/usb/endpoint.h | 13 ++- sound/usb/pcm.c | 157 ++++++++++++++++++++++------- 4 files changed, 305 insertions(+), 106 deletions(-) -- 2.26.2

2 23

[PATCH 00/34] address all -Wunused-const warnings
by Arnd Bergmann 27 Jan '25

27 Jan '25

From: Arnd Bergmann <arnd(a)arndb.de> Compilers traditionally warn for unused 'static' variables, but not if they are constant. The reason here is a custom for C++ programmers to define named constants as 'static const' variables in header files instead of using macros or enums. In W=1 builds, we get warnings only static const variables in C files, but not in headers, which is a good compromise, but this still produces warning output in at least 30 files. These warnings are almost all harmless, but also trivial to fix, and there is no good reason to warn only about the non-const variables being unused. I've gone through all the files that I found using randconfig and allmodconfig builds and created patches to avoid these warnings, with the goal of retaining a clean build once the option is enabled by default. Unfortunately, there is one fairly large patch ("drivers: remove incorrect of_match_ptr/ACPI_PTR annotations") that touches 34 individual drivers that all need the same one-line change. If necessary, I can split it up by driver or by subsystem, but at least for reviewing I would keep it as one piece for the moment. Please merge the individual patches through subsystem trees. I expect that some of these will have to go through multiple revisions before they are picked up, so anything that gets applied early saves me from resending. Arnd Arnd Bergmann (31): powerpc/fsl-soc: hide unused const variable ubsan: fix unused variable warning in test module platform: goldfish: remove ACPI_PTR() annotations i2c: pxa: hide unused icr_bits[] variable 3c515: remove unused 'mtu' variable tracing: hide unused ftrace_event_id_fops Input: synaptics: hide unused smbus_pnp_ids[] array power: rt9455: hide unused rt9455_boost_voltage_values efi: sysfb: don't build when EFI is disabled clk: ti: dpll: fix incorrect #ifdef checks apm-emulation: hide an unused variable sisfb: hide unused variables dma/congiguous: avoid warning about unused size_bytes leds: apu: remove duplicate DMI lookup data iio: ad5755: hook up of_device_id lookup to platform driver greybus: arche-ctrl: move device table to its right location lib: checksum: hide unused expected_csum_ipv6_magic[] sunrpc: suppress warnings for unused procfs functions comedi: ni_atmio: avoid warning for unused device_ids[] table iwlegacy: don't warn for unused variables with DEBUG_FS=n drm/komeda: don't warn for unused debugfs files firmware: qcom_scm: mark qcom_scm_qseecom_allowlist as __maybe_unused crypto: ccp - drop platform ifdef checks usb: gadget: omap_udc: remove unused variable isdn: kcapi: don't build unused procfs code cpufreq: intel_pstate: hide unused intel_pstate_cpu_oob_ids[] net: xgbe: remove extraneous #ifdef checks Input: imagis - remove incorrect ifdef checks sata: mv: drop unnecessary #ifdef checks ASoC: remove incorrect of_match_ptr/ACPI_PTR annotations spi: remove incorrect of_match_ptr annotations drivers: remove incorrect of_match_ptr/ACPI_PTR annotations kbuild: always enable -Wunused-const-variable Krzysztof Kozlowski (1): Input: stmpe-ts - mark OF related data as maybe unused arch/powerpc/sysdev/fsl_msi.c | 2 + drivers/ata/sata_mv.c | 64 +++++++++---------- drivers/char/apm-emulation.c | 5 +- drivers/char/ipmi/ipmb_dev_int.c | 2 +- drivers/char/tpm/tpm_ftpm_tee.c | 2 +- drivers/clk/ti/dpll.c | 10 ++- drivers/comedi/drivers/ni_atmio.c | 2 +- drivers/cpufreq/intel_pstate.c | 2 + drivers/crypto/ccp/sp-platform.c | 14 +--- drivers/dma/img-mdc-dma.c | 2 +- drivers/firmware/efi/Makefile | 3 +- drivers/firmware/efi/sysfb_efi.c | 2 - drivers/firmware/qcom/qcom_scm.c | 2 +- drivers/fpga/versal-fpga.c | 2 +- .../gpu/drm/arm/display/komeda/komeda_dev.c | 8 --- drivers/hid/hid-google-hammer.c | 6 +- drivers/i2c/busses/i2c-pxa.c | 2 +- drivers/i2c/muxes/i2c-mux-ltc4306.c | 2 +- drivers/i2c/muxes/i2c-mux-reg.c | 2 +- drivers/iio/dac/ad5755.c | 1 + drivers/input/mouse/synaptics.c | 2 + drivers/input/touchscreen/imagis.c | 4 +- drivers/input/touchscreen/stmpe-ts.c | 2 +- drivers/input/touchscreen/wdt87xx_i2c.c | 2 +- drivers/isdn/capi/Makefile | 3 +- drivers/isdn/capi/kcapi.c | 7 +- drivers/leds/leds-apu.c | 3 +- drivers/mux/adg792a.c | 2 +- drivers/net/ethernet/3com/3c515.c | 3 - drivers/net/ethernet/amd/xgbe/xgbe-platform.c | 8 --- drivers/net/ethernet/apm/xgene-v2/main.c | 2 +- drivers/net/ethernet/hisilicon/hns_mdio.c | 2 +- drivers/net/wireless/intel/iwlegacy/4965-rs.c | 15 +---- drivers/net/wireless/intel/iwlegacy/common.h | 2 - drivers/platform/goldfish/goldfish_pipe.c | 2 +- drivers/power/supply/rt9455_charger.c | 2 + drivers/regulator/pbias-regulator.c | 2 +- drivers/regulator/twl-regulator.c | 2 +- drivers/regulator/twl6030-regulator.c | 2 +- drivers/rtc/rtc-fsl-ftm-alarm.c | 2 +- drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 2 +- drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 2 +- drivers/spi/spi-armada-3700.c | 2 +- drivers/spi/spi-img-spfi.c | 2 +- drivers/spi/spi-meson-spicc.c | 2 +- drivers/spi/spi-meson-spifc.c | 2 +- drivers/spi/spi-orion.c | 2 +- drivers/spi/spi-pic32-sqi.c | 2 +- drivers/spi/spi-pic32.c | 2 +- drivers/spi/spi-rockchip.c | 2 +- drivers/spi/spi-s3c64xx.c | 2 +- drivers/spi/spi-st-ssc4.c | 2 +- drivers/staging/greybus/arche-apb-ctrl.c | 1 + drivers/staging/greybus/arche-platform.c | 9 +-- drivers/staging/pi433/pi433_if.c | 2 +- drivers/tty/serial/amba-pl011.c | 6 +- drivers/tty/serial/ma35d1_serial.c | 2 +- drivers/usb/gadget/udc/omap_udc.c | 10 +-- drivers/video/fbdev/sis/init301.c | 3 +- kernel/dma/contiguous.c | 2 +- kernel/trace/trace_events.c | 4 ++ lib/checksum_kunit.c | 2 + lib/test_ubsan.c | 2 +- net/sunrpc/cache.c | 10 +-- scripts/Makefile.extrawarn | 1 - sound/soc/atmel/sam9x5_wm8731.c | 2 +- sound/soc/codecs/rt5514-spi.c | 2 +- sound/soc/qcom/lpass-sc7280.c | 2 +- sound/soc/samsung/aries_wm8994.c | 2 +- 69 files changed, 121 insertions(+), 169 deletions(-) -- 2.39.2 Cc: Michael Ellerman <mpe(a)ellerman.id.au> Cc: Christophe Leroy <christophe.leroy(a)csgroup.eu> Cc: Damien Le Moal <dlemoal(a)kernel.org> Cc: Jiri Kosina <jikos(a)kernel.org> Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Cc: Corey Minyard <minyard(a)acm.org> Cc: Peter Huewe <peterhuewe(a)gmx.de> Cc: Jarkko Sakkinen <jarkko(a)kernel.org> Cc: Tero Kristo <kristo(a)kernel.org> Cc: Stephen Boyd <sboyd(a)kernel.org> Cc: Ian Abbott <abbotti(a)mev.co.uk> Cc: H Hartley Sweeten <hsweeten(a)visionengravers.com> Cc: Srinivas Pandruvada <srinivas.pandruvada(a)linux.intel.com> Cc: Len Brown <lenb(a)kernel.org> Cc: "Rafael J. Wysocki" <rafael(a)kernel.org> Cc: John Allen <john.allen(a)amd.com> Cc: Herbert Xu <herbert(a)gondor.apana.org.au> Cc: Vinod Koul <vkoul(a)kernel.org> Cc: Ard Biesheuvel <ardb(a)kernel.org> Cc: Bjorn Andersson <andersson(a)kernel.org> Cc: Moritz Fischer <mdf(a)kernel.org> Cc: Liviu Dudau <liviu.dudau(a)arm.com> Cc: Benjamin Tissoires <benjamin.tissoires(a)redhat.com> Cc: Andi Shyti <andi.shyti(a)kernel.org> Cc: Michael Hennerich <michael.hennerich(a)analog.com> Cc: Peter Rosin <peda(a)axentia.se> Cc: Lars-Peter Clausen <lars(a)metafoo.de> Cc: Jonathan Cameron <jic23(a)kernel.org> Cc: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Cc: Markuss Broks <markuss.broks(a)gmail.com> Cc: Alexandre Torgue <alexandre.torgue(a)foss.st.com> Cc: Lee Jones <lee(a)kernel.org> Cc: Jakub Kicinski <kuba(a)kernel.org> Cc: Shyam Sundar S K <Shyam-sundar.S-k(a)amd.com> Cc: Iyappan Subramanian <iyappan(a)os.amperecomputing.com> Cc: Yisen Zhuang <yisen.zhuang(a)huawei.com> Cc: Stanislaw Gruszka <stf_xl(a)wp.pl> Cc: Kalle Valo <kvalo(a)kernel.org> Cc: Sebastian Reichel <sre(a)kernel.org> Cc: Tony Lindgren <tony(a)atomide.com> Cc: Mark Brown <broonie(a)kernel.org> Cc: Alexandre Belloni <alexandre.belloni(a)bootlin.com> Cc: Xiang Chen <chenxiang66(a)hisilicon.com> Cc: "Martin K. Petersen" <martin.petersen(a)oracle.com> Cc: Neil Armstrong <neil.armstrong(a)linaro.org> Cc: Heiko Stuebner <heiko(a)sntech.de> Cc: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> Cc: Vaibhav Hiremath <hvaibhav.linux(a)gmail.com> Cc: Alex Elder <elder(a)kernel.org> Cc: Jiri Slaby <jirislaby(a)kernel.org> Cc: Jacky Huang <ychuang3(a)nuvoton.com> Cc: Helge Deller <deller(a)gmx.de> Cc: Christoph Hellwig <hch(a)lst.de> Cc: Robin Murphy <robin.murphy(a)arm.com> Cc: Steven Rostedt <rostedt(a)goodmis.org> Cc: Masami Hiramatsu <mhiramat(a)kernel.org> Cc: Andrew Morton <akpm(a)linux-foundation.org> Cc: Kees Cook <keescook(a)chromium.org> Cc: Trond Myklebust <trond.myklebust(a)hammerspace.com> Cc: Anna Schumaker <anna(a)kernel.org> Cc: Masahiro Yamada <masahiroy(a)kernel.org> Cc: Nathan Chancellor <nathan(a)kernel.org> Cc: Takashi Iwai <tiwai(a)suse.com> Cc: linuxppc-dev(a)lists.ozlabs.org Cc: linux-kernel(a)vger.kernel.org Cc: linux-ide(a)vger.kernel.org Cc: openipmi-developer(a)lists.sourceforge.net Cc: linux-integrity(a)vger.kernel.org Cc: linux-omap(a)vger.kernel.org Cc: linux-clk(a)vger.kernel.org Cc: linux-pm(a)vger.kernel.org Cc: linux-crypto(a)vger.kernel.org Cc: dmaengine(a)vger.kernel.org Cc: linux-efi(a)vger.kernel.org Cc: linux-arm-msm(a)vger.kernel.org Cc: linux-fpga(a)vger.kernel.org Cc: dri-devel(a)lists.freedesktop.org Cc: linux-input(a)vger.kernel.org Cc: linux-i2c(a)vger.kernel.org Cc: linux-iio(a)vger.kernel.org Cc: linux-stm32(a)st-md-mailman.stormreply.com Cc: linux-arm-kernel(a)lists.infradead.org Cc: netdev(a)vger.kernel.org Cc: linux-leds(a)vger.kernel.org Cc: linux-wireless(a)vger.kernel.org Cc: linux-rtc(a)vger.kernel.org Cc: linux-scsi(a)vger.kernel.org Cc: linux-spi(a)vger.kernel.org Cc: linux-amlogic(a)lists.infradead.org Cc: linux-rockchip(a)lists.infradead.org Cc: linux-samsung-soc(a)vger.kernel.org Cc: greybus-dev(a)lists.linaro.org Cc: linux-staging(a)lists.linux.dev Cc: linux-serial(a)vger.kernel.org Cc: linux-usb(a)vger.kernel.org Cc: linux-fbdev(a)vger.kernel.org Cc: iommu(a)lists.linux.dev Cc: linux-trace-kernel(a)vger.kernel.org Cc: kasan-dev(a)googlegroups.com Cc: linux-hardening(a)vger.kernel.org Cc: linux-nfs(a)vger.kernel.org Cc: linux-kbuild(a)vger.kernel.org Cc: alsa-devel(a)alsa-project.org Cc: linux-sound(a)vger.kernel.org

7 7

[RESEND PATCH v2] drm/bridge: dw-hdmi-i2s: set insert_pcuv bit if hardware supports it
by Geraldo Nascimento 30 Dec '24

30 Dec '24

Hi Mark, resending this as it failed to apply in my last submission. Added Neil Armstrong to Cc: as hopefully he will be able to better review this. Thanks, Geraldo Nascimento --- Starting with version 2.10a of Synopsys DesignWare HDMI controller the insert_pcuv bit was introduced. On RK3399pro SoM (Radxa Rock Pi N10), for example, if we neglect to set this bit and proceed to enable hdmi_sound and i2s2 on the device tree there will be extreme clipping of sound output, to the point that music sounds like white noise. Problem could also manifest as just mild cracking depending of HDMI audio implementation of sink. Setting insert_pcuv bit (bit 2 of aud_conf2 Audio Sample register) fixes this. Signed-off-by: Geraldo Nascimento <geraldogabriel(a)gmail.com> --- v1->v2: SoC->SoM on description, better commenting, minor style changes, conditional application of fix for L-PCM only --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio-20221017.c +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio-20221017.c @@ -42,6 +42,7 @@ static int dw_hdmi_i2s_hw_params(struct device *dev, void *data, struct dw_hdmi *hdmi = audio->hdmi; u8 conf0 = 0; u8 conf1 = 0; + u8 conf2 = 0; u8 inputclkfs = 0; /* it cares I2S only */ @@ -101,6 +102,28 @@ static int dw_hdmi_i2s_hw_params(struct device *dev, void *data, return -EINVAL; } + /* + * dw-hdmi introduced insert_pcuv bit in + * version 2.10a. + * + * This single bit (bit 2 of HDMI_AUD_CONF2) + * when set to 1 will enable the insertion of the PCUV + * (Parity, Channel Status, User bit and Validity) + * bits on the incoming audio stream. + * + * Support is limited to Linear PCM audio. If + * neglected, the lack of valid PCUV bits + * on L-PCM streams will cause anything from + * mild cracking to full blown extreme + * clipping depending on the HDMI audio + * implementation of the sink. + * + */ + + if (hdmi_read(audio, HDMI_DESIGN_ID) >= 0x21 && + !(hparms->iec.status[0] & IEC958_AES0_NONAUDIO)) + conf2 = HDMI_AUD_CONF2_INSERT_PCUV; + dw_hdmi_set_sample_rate(hdmi, hparms->sample_rate); dw_hdmi_set_channel_status(hdmi, hparms->iec.status); dw_hdmi_set_channel_count(hdmi, hparms->channels); @@ -109,6 +120,7 @@ static int dw_hdmi_i2s_hw_params(struct device *dev, void *data, hdmi_write(audio, inputclkfs, HDMI_AUD_INPUTCLKFS); hdmi_write(audio, conf0, HDMI_AUD_CONF0); hdmi_write(audio, conf1, HDMI_AUD_CONF1); + hdmi_write(audio, conf2, HDMI_AUD_CONF2); return 0; } --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-20221017.h +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-20221017.h @@ -931,6 +931,11 @@ enum { HDMI_AUD_CONF1_WIDTH_16 = 0x10, HDMI_AUD_CONF1_WIDTH_24 = 0x18, +/* AUD_CONF2 field values */ + HDMI_AUD_CONF2_HBR = 0x01, + HDMI_AUD_CONF2_NLPCM = 0x02, + HDMI_AUD_CONF2_INSERT_PCUV = 0x04, + /* AUD_CTS3 field values */ HDMI_AUD_CTS3_N_SHIFT_OFFSET = 5, HDMI_AUD_CTS3_N_SHIFT_MASK = 0xe0,

3 6

[PATCH v4 0/9] ASoC: samsung: midas-audio: Add GPIO-based headset jack detection
by Artur Weber 29 Dec '24

29 Dec '24

Many of Samsung's Exynos 4 devices share the same midas-audio driver to handle the codec setup. While most of these devices, including the Midas itself, use the jack detection provided by the WM8994 driver, other devices such as the Samsung Galaxy Tab 3 8.0 (lt01) use two GPIOs and an ADC channel to determine jack insertion, the jack's type, and button presses (for headsets with volume up/down/play buttons). In the downstream kernel, this behavior is implemented in the sec-jack driver[1], and the per-device settings are configured in *-jack.c files in the mach folder (see e.g. the Tab 3's implementation[2]). This patchset implements this mechanism in the midas_wm1811.c driver, and adds new DTS options to allow for its configuration. It also enables jack detection for the Samsung Galaxy Tab 3 8.0. A very similar mechanism was already present in the aries_wm8994.c driver[3]; this implementation heavily borrows from it, though there are a few extra cleanups as well. Signed-off-by: Artur Weber <aweber.kernel(a)gmail.com> [1] https://github.com/gr8nole/android_kernel_samsung_smdk4x12/blob/lineage-14.… [2] https://github.com/gr8nole/android_kernel_samsung_smdk4x12/blob/lineage-14.… [3] https://github.com/torvalds/linux/blob/master/sound/soc/samsung/aries_wm899… --- Changes in v4: - Replaced manual regulator toggles with SND_SOC_DAPM_REGULATOR_SUPPLY, both for existing mic bias regulators and for the new headset mic bias regulator - Link to v3: https://lore.kernel.org/r/20240519-midas-wm1811-gpio-jack-v3-0-0c1736144c0e… Changes in v3: - Re-added pipe (|) character to samsung,headset-button-threshold-microvolt description to prevent it from being parsed as a mapping (fixes syntax error) - Split out "ASoC: dt-bindings: samsung,midas-audio: Add GPIO-based headset jack detection" into two patches - Link to v2: https://lore.kernel.org/r/20240508-midas-wm1811-gpio-jack-v2-0-b4d36cd02c6e… Changes in v2: - Added vendor prefix to threshold properties - Added separate headset mic bias regulator - Changed some cases of dev_err + return with return dev_err_probe - Added an extra patch to replace some previous dev_err + return cases with dev_err_probe - Moved tab3 DTS wm1811 codec config changes to separate commit --- Artur Weber (9): ASoC: dt-bindings: samsung,midas-audio: Add headset mic bias supply ASoC: dt-bindings: samsung,midas-audio: Add GPIO-based headset jack detection ASoC: samsung: midas_wm1811: Use SND_SOC_DAPM_REGULATOR_SUPPLY for bias regulators ASoC: samsung: midas_wm1811: Add headset mic bias supply support ASoC: samsung: midas_wm1811: Add GPIO-based headset jack detection ASoC: samsung: midas_wm1811: Use dev_err_probe where appropriate ARM: dts: samsung: exynos4212-tab3: Fix headset mic, add jack detection ARM: dts: samsung: exynos4212-tab3: Add MCLK2 clock to WM1811 codec config ARM: dts: samsung: exynos4212-tab3: Drop interrupt from WM1811 codec .../bindings/sound/samsung,midas-audio.yaml | 33 ++ arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi | 31 +- sound/soc/samsung/Kconfig | 2 +- sound/soc/samsung/midas_wm1811.c | 348 +++++++++++++++++---- 4 files changed, 343 insertions(+), 71 deletions(-) --- base-commit: a38297e3fb012ddfa7ce0321a7e5a8daeb1872b6 change-id: 20240502-midas-wm1811-gpio-jack-b10226b17ecc Best regards, -- Artur Weber <aweber.kernel(a)gmail.com>

3 12

hda: how to implement component master_unbind?
by Kai Vehmanen 20 Dec '24

20 Dec '24

Hi Takashi et al, I've been having multiple discussions with our i915 team w.r.t. audio driver behaviour when the aggregate component is unbound, triggered by i915 unbind. This came up again in the recent regression with devres allocations and I now dug into the topic again. In short, I'm puzzled how to really implement this. ALSA (or ASoC) don't really have support for individual components of a card disappearing in a hotplug fashion. At card level, we do have such support (USB, firewire and recent work for PCI hotplug). But not individual components of a card getting unplugged. In current code we have this: static void hdac_component_master_unbind(struct device *dev) { » struct drm_audio_component *acomp = hdac_get_acomp(dev); » if (acomp->audio_ops && acomp->audio_ops->master_unbind) » » acomp->audio_ops->master_unbind(dev, acomp); » module_put(acomp->ops->owner); » component_unbind_all(dev, acomp); » WARN_ON(acomp->ops || acomp->dev); } ... when e.g. i915 driver is unbound (but could be any driver using the component framework, not jus Intel hw), i915 calls component_del() and HDA gets call to the above. After this, acomp ops are null are audio no longer has ability to talk to i915 driver (which makes sense given it's unbound). If audio was runtime suspended, this kind of works (but relies on some good luck). Upon HDA controller resume, we note acomp ops are NULL and HDMI/DP operations (like snd_hdac_display_power()) silently become no-ops. PCM streaming will go to /dev/null, but this is ok'ish since no monitor can be connected anyways. If audio was active, we start to get warnings or worse. Audio expects hw display codec to be powered and programmed, but suddenly it mey lose state. If the audio controller is actually part of the display hardware (e.g. discrete GPUs), then controller registers can stop functioning (they should be still available, but given the main diplay driver is unbound, odds of suprising behaviour are high). So this is less than ideal. I've been looking at options: 1) prevent/block the unbind if audio device is busy The component framework does not allow individual components to return -EBUSY, so there's no way to let others know that unbind is not possible now. This would force anyone testing DRM driver unbind to first unbind the audio driver and stop any active audio use-cases if needed. 2) unbind the ALSA card I've experimented doing a device_unregister() from the above callback, but this has not really worked (onion peeling exercise of new probelms). The code is shared by multiple controllers, so getting a handle to an snd_card object is not straighforward (drvdata is differnet for SOF and snd-hda-intel for instance). But with some new work, maybe we could call snd_card_disconnect() to detach the card and inform user-space. 3) continue as-is and try to fix bugs If audio is active, maybe we could force a acomp->put_power() to ensure a clean unregister of the display part. But this leaves a big chunk of issues especially with HDA controllers that require the display to be powered on, to function. .. Any ideas, and/or has there been prior work? It seems Takashi it's been mostly you who has been active working on the acomp integration recently. I also included Chris, Daniel and Jani who've had patches to hdac_component.c. Br, Kai

3 5

[PATCH] dt-bindings: sound:atmel-at91sam9g20ek: convert bindings to json-schema
by Balakrishnan Sambath 10 Dec '24

10 Dec '24

Convert atmel-at91sam9g20ek-wm8731-audio DT binding to yaml based json-schema.Change file name to match json-scheme naming. Signed-off-by: Balakrishnan Sambath <balakrishnan.s(a)microchip.com> --- .../bindings/sound/atmel,at91sam9g20ek-wm8731.yaml | 60 ++++++++++++++++++++++ .../sound/atmel-at91sam9g20ek-wm8731-audio.txt | 26 ---------- 2 files changed, 60 insertions(+), 26 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/atmel,at91sam9g20ek-wm8731.yaml b/Documentation/devicetree/bindings/sound/atmel,at91sam9g20ek-wm8731.yaml new file mode 100644 index 000000000000..f6330707fe1b --- /dev/null +++ b/Documentation/devicetree/bindings/sound/atmel,at91sam9g20ek-wm8731.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/atmel,at91sam9g20ek-wm8731.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel at91sam9g20ek wm8731 audio complex + +maintainers: + - Balakrishnan Sambath <balakrishnan.s(a)microchip.com> + +properties: + compatible: + const: atmel,at91sam9g20ek-wm8731-audio + + atmel,model: + $ref: /schemas/types.yaml#/definitions/string + description: The user-visible name of this sound complex. + atmel,audio-routing: + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + description: A list of the connections between audio components. + minItems: 2 + items: + enum: + # Board Connectors + - "Ext Spk" + - "Int MIC" + + # CODEC Pins + - LHPOUT + - MICIN + atmel,ssc-controller: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of the SSC controller + atmel,audio-codec: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of WM8731 audio codec + +required: + - compatible + - atmel,model + - atmel,audio-routing + - atmel,ssc-controller + - atmel,audio-codec + +additionalProperties: false + +examples: + - | + sound { + compatible = "atmel,at91sam9g20ek-wm8731-audio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck0_as_mck>; + atmel,model = "wm8731 @ AT91SAMG20EK"; + atmel,audio-routing = + "Ext Spk", "LHPOUT", + "Int MIC", "MICIN"; + atmel,ssc-controller = <&ssc0>; + atmel,audio-codec = <&wm8731>; + }; diff --git a/Documentation/devicetree/bindings/sound/atmel-at91sam9g20ek-wm8731-audio.txt b/Documentation/devicetree/bindings/sound/atmel-at91sam9g20ek-wm8731-audio.txt deleted file mode 100644 index 9c5a9947b64d..000000000000 --- a/Documentation/devicetree/bindings/sound/atmel-at91sam9g20ek-wm8731-audio.txt +++ /dev/null @@ -1,26 +0,0 @@ -* Atmel at91sam9g20ek wm8731 audio complex - -Required properties: - - compatible: "atmel,at91sam9g20ek-wm8731-audio" - - atmel,model: The user-visible name of this sound complex. - - atmel,audio-routing: A list of the connections between audio components. - - atmel,ssc-controller: The phandle of the SSC controller - - atmel,audio-codec: The phandle of the WM8731 audio codec -Optional properties: - - pinctrl-names, pinctrl-0: Please refer to pinctrl-bindings.txt - -Example: -sound { - compatible = "atmel,at91sam9g20ek-wm8731-audio"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pck0_as_mck>; - - atmel,model = "wm8731 @ AT91SAMG20EK"; - - atmel,audio-routing = - "Ext Spk", "LHPOUT", - "Int MIC", "MICIN"; - - atmel,ssc-controller = <&ssc0>; - atmel,audio-codec = <&wm8731>; -}; --- base-commit: 0dd3ee31125508cd67f7e7172247f05b7fd1753a change-id: 20240214-at91sam9g20ek-wm8731-yaml-404ddddbb91a Best regards, -- Balakrishnan Sambath <balakrishnan.s(a)microchip.com>

5 5

[PATCH v2 0/3] ASoC: mediatek:mt8186: fix both the speaker and hdmi
by Jiaxin Yu 06 Dec '24

06 Dec '24

The speaker and hdmi of mt8186 platform are shared the same port of I2S, when connect the external display, use build-in speakers to play audio, they both playback at the same time. So we want to manage the playback device through DAPM events. Change since v1: Support audio function for it6505 bridge to hdmi-codec Jiaxin Yu (3): ASoC: hdmi-codec: Add event handler for hdmi TX ASoC: mediatek: mt8186: correct the HDMI widgets drm/bridge: it6505: Add audio support drivers/gpu/drm/bridge/ite-it6505.c | 81 +++++++++++++++++-- include/sound/hdmi-codec.h | 6 ++ sound/soc/codecs/hdmi-codec.c | 37 ++++++++- .../mt8186/mt8186-mt6366-da7219-max98357.c | 2 +- .../mt8186/mt8186-mt6366-rt1019-rt5682s.c | 2 +- 5 files changed, 116 insertions(+), 12 deletions(-) -- 2.18.0

3 16