August 2024 - Alsa-devel - mailman.alsa-project.org

[PATCH] ASoC: cs43130: Constify snd_soc_component_driver struct
by Christophe JAILLET 03 Aug '24

03 Aug '24

In order to constify `snd_soc_component_driver` struct, duplicate `soc_component_dev_cs43130` into a `soc_component_dev_cs43130_digital` and `soc_component_dev_cs43130_analog`. These 2 new structures share the same .dapm_widgets and .dapm_routes arrays but differ for .num_dapm_widgets and .num_dapm_routes. In the digital case, the last entries are not taken into account. Doing so has several advantages: - `snd_soc_component_driver` can be declared as const to move their declarations to read-only sections. - code in the probe is simpler. There is no need to concatenate some arrays to handle the "analog" case - this saves some memory because all_hp_widgets and analog_hp_routes can be removed. Before : ====== text data bss dec hex filename 53965 8265 4512 66742 104b6 sound/soc/codecs/cs43130.o After : ===== text data bss dec hex filename 54409 7881 64 62354 f392 sound/soc/codecs/cs43130.o Signed-off-by: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> --- Compile tested-only. See discussion at [1]. [1]: https://lore.kernel.org/all/ZqNawRmAqBRLIoQq@opensource.cirrus.com/ --- sound/soc/codecs/cs43130.c | 73 +++++++++++++++++--------------------- 1 file changed, 32 insertions(+), 41 deletions(-) diff --git a/sound/soc/codecs/cs43130.c b/sound/soc/codecs/cs43130.c index be4037890fdb..cb4ca80f36d2 100644 --- a/sound/soc/codecs/cs43130.c +++ b/sound/soc/codecs/cs43130.c @@ -1415,7 +1415,7 @@ static const char * const bypass_mux_text[] = { static SOC_ENUM_SINGLE_DECL(bypass_enum, SND_SOC_NOPM, 0, bypass_mux_text); static const struct snd_kcontrol_new bypass_ctrl = SOC_DAPM_ENUM("Switch", bypass_enum); -static const struct snd_soc_dapm_widget digital_hp_widgets[] = { +static const struct snd_soc_dapm_widget hp_widgets[] = { SND_SOC_DAPM_MUX("Bypass Switch", SND_SOC_NOPM, 0, 0, &bypass_ctrl), SND_SOC_DAPM_OUTPUT("HPOUTA"), SND_SOC_DAPM_OUTPUT("HPOUTB"), @@ -1447,19 +1447,16 @@ static const struct snd_soc_dapm_widget digital_hp_widgets[] = { CS43130_PDN_HP_SHIFT, 1, cs43130_dac_event, (SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD)), -}; -static const struct snd_soc_dapm_widget analog_hp_widgets[] = { +/* Some devices have some extra analog widgets */ +#define NUM_ANALOG_WIDGETS 1 + SND_SOC_DAPM_DAC_E("Analog Playback", NULL, CS43130_HP_OUT_CTL_1, CS43130_HP_IN_EN_SHIFT, 0, cs43130_hpin_event, (SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD)), }; -static struct snd_soc_dapm_widget all_hp_widgets[ - ARRAY_SIZE(digital_hp_widgets) + - ARRAY_SIZE(analog_hp_widgets)]; - -static const struct snd_soc_dapm_route digital_hp_routes[] = { +static const struct snd_soc_dapm_route hp_routes[] = { {"ASPIN PCM", NULL, "ASP PCM Playback"}, {"ASPIN DoP", NULL, "ASP DoP Playback"}, {"XSPIN DoP", NULL, "XSP DoP Playback"}, @@ -1472,15 +1469,12 @@ static const struct snd_soc_dapm_route digital_hp_routes[] = { {"Bypass Switch", "Internal", "HiFi DAC"}, {"HPOUTA", NULL, "Bypass Switch"}, {"HPOUTB", NULL, "Bypass Switch"}, -}; -static const struct snd_soc_dapm_route analog_hp_routes[] = { +/* Some devices have some extra analog routes */ +#define NUM_ANALOG_ROUTES 1 {"Bypass Switch", "Alternative", "Analog Playback"}, }; -static struct snd_soc_dapm_route all_hp_routes[ - ARRAY_SIZE(digital_hp_routes) + - ARRAY_SIZE(analog_hp_routes)]; static const unsigned int cs43130_asp_src_rates[] = { 32000, 44100, 48000, 88200, 96000, 176400, 192000, 352800, 384000 @@ -2398,7 +2392,23 @@ static int cs43130_probe(struct snd_soc_component *component) return 0; } -static struct snd_soc_component_driver soc_component_dev_cs43130 = { +static const struct snd_soc_component_driver soc_component_dev_cs43130_digital = { + .probe = cs43130_probe, + .controls = cs43130_snd_controls, + .num_controls = ARRAY_SIZE(cs43130_snd_controls), + .set_sysclk = cs43130_component_set_sysclk, + .set_pll = cs43130_set_pll, + .idle_bias_on = 1, + .use_pmdown_time = 1, + .endianness = 1, + /* Don't take into account the ending analog widgets and routes */ + .dapm_widgets = hp_widgets, + .num_dapm_widgets = ARRAY_SIZE(hp_widgets) - NUM_ANALOG_WIDGETS, + .dapm_routes = hp_routes, + .num_dapm_routes = ARRAY_SIZE(hp_routes) - NUM_ANALOG_ROUTES, +}; + +static const struct snd_soc_component_driver soc_component_dev_cs43130_analog = { .probe = cs43130_probe, .controls = cs43130_snd_controls, .num_controls = ARRAY_SIZE(cs43130_snd_controls), @@ -2407,6 +2417,10 @@ static struct snd_soc_component_driver soc_component_dev_cs43130 = { .idle_bias_on = 1, .use_pmdown_time = 1, .endianness = 1, + .dapm_widgets = hp_widgets, + .num_dapm_widgets = ARRAY_SIZE(hp_widgets), + .dapm_routes = hp_routes, + .num_dapm_routes = ARRAY_SIZE(hp_routes), }; static const struct regmap_config cs43130_regmap = { @@ -2479,6 +2493,7 @@ static int cs43130_handle_device_data(struct cs43130_private *cs43130) static int cs43130_i2c_probe(struct i2c_client *client) { + const struct snd_soc_component_driver *component_driver; struct cs43130_private *cs43130; int ret; unsigned int reg; @@ -2596,39 +2611,15 @@ static int cs43130_i2c_probe(struct i2c_client *client) switch (cs43130->dev_id) { case CS43130_CHIP_ID: case CS43131_CHIP_ID: - memcpy(all_hp_widgets, digital_hp_widgets, - sizeof(digital_hp_widgets)); - memcpy(all_hp_widgets + ARRAY_SIZE(digital_hp_widgets), - analog_hp_widgets, sizeof(analog_hp_widgets)); - memcpy(all_hp_routes, digital_hp_routes, - sizeof(digital_hp_routes)); - memcpy(all_hp_routes + ARRAY_SIZE(digital_hp_routes), - analog_hp_routes, sizeof(analog_hp_routes)); - - soc_component_dev_cs43130.dapm_widgets = - all_hp_widgets; - soc_component_dev_cs43130.num_dapm_widgets = - ARRAY_SIZE(all_hp_widgets); - soc_component_dev_cs43130.dapm_routes = - all_hp_routes; - soc_component_dev_cs43130.num_dapm_routes = - ARRAY_SIZE(all_hp_routes); + component_driver = &soc_component_dev_cs43130_analog; break; case CS43198_CHIP_ID: case CS4399_CHIP_ID: - soc_component_dev_cs43130.dapm_widgets = - digital_hp_widgets; - soc_component_dev_cs43130.num_dapm_widgets = - ARRAY_SIZE(digital_hp_widgets); - soc_component_dev_cs43130.dapm_routes = - digital_hp_routes; - soc_component_dev_cs43130.num_dapm_routes = - ARRAY_SIZE(digital_hp_routes); + component_driver = &soc_component_dev_cs43130_digital; break; } - ret = devm_snd_soc_register_component(cs43130->dev, - &soc_component_dev_cs43130, + ret = devm_snd_soc_register_component(cs43130->dev, component_driver, cs43130_dai, ARRAY_SIZE(cs43130_dai)); if (ret < 0) { dev_err(cs43130->dev, -- 2.45.2

2 1

Soundblaster AE-5 100% Muted on alsamixer every boot!!
by GitHub issues - opened 02 Aug '24

02 Aug '24

alsa-project/alsa-lib issue #404 was opened from DavidRLTG: I am on Linux Mint Wilma (22), 64-bit. Obviously, I have a Soundblaster AE-5 Sound card The issue I am encountering is, well, every boot I have to enter Alsamixer and unmute every channel on my Soundblaster AE-5. alsactl store does nothing, and yes I ran it as superuser. Also, I'm on pipewire! I think Wilma comes with it preinstalled. sudo alsactl store is also temporary, the config is lost at every reboot, and doing sudo alsactl restore does nothing. Any ideas for a fix? Issue URL : https://github.com/alsa-project/alsa-lib/issues/404 Repository URL: https://github.com/alsa-project/alsa-lib

1 0

[RESEND PATCH v2] ASoc: tas2781: Fix a compiling warning reported by robot kernel test due to adding tas2563_dvc_table
by Shenghao Ding 02 Aug '24

02 Aug '24

Move tas2563_dvc_table into a separate Header file, as only tas2781 codec driver use this table, and hda side codec driver won't use it. Fixes: 75ed63a5ab5d ("ASoC: tas2781: Add new Kontrol to set tas2563 digital Volume") Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- v2: - Modify the submission subject v1: - | Reported-by: kernel test robot <lkp(a)intel.com> | Closes: https://urldefense.com/v3/__https://lore.kernel.org/oe-kbuild-all/202407131… - Create tas2563-tlv.h into include/sound - Move tas2563_dvc_table from tas2781-tlv.h to tas2563-tlv.h - Add "#include <sound/tas2563-tlv.h>" into tas2781-i2c.c --- include/sound/tas2563-tlv.h | 279 +++++++++++++++++++++++++++++++++ include/sound/tas2781-tlv.h | 260 ------------------------------ sound/soc/codecs/tas2781-i2c.c | 1 + 3 files changed, 280 insertions(+), 260 deletions(-) create mode 100644 include/sound/tas2563-tlv.h diff --git a/include/sound/tas2563-tlv.h b/include/sound/tas2563-tlv.h new file mode 100644 index 000000000000..faa3e194f73b --- /dev/null +++ b/include/sound/tas2563-tlv.h @@ -0,0 +1,279 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +// +// ALSA SoC Texas Instruments TAS2563 Audio Smart Amplifier +// +// Copyright (C) 2022 - 2024 Texas Instruments Incorporated +// https://www.ti.com +// +// The TAS2563 driver implements a flexible and configurable +// algo coefficient setting for one, two, or even multiple +// TAS2563 chips. +// +// Author: Shenghao Ding <shenghao-ding(a)ti.com> +// + +#ifndef __TAS2563_TLV_H__ +#define __TAS2563_TLV_H__ + +static const __maybe_unused DECLARE_TLV_DB_SCALE(tas2563_dvc_tlv, -12150, 50, 1); + +/* pow(10, db/20) * pow(2,30) */ +static const unsigned char tas2563_dvc_table[][4] = { + { 0X00, 0X00, 0X00, 0X00 }, /* -121.5db */ + { 0X00, 0X00, 0X03, 0XBC }, /* -121.0db */ + { 0X00, 0X00, 0X03, 0XF5 }, /* -120.5db */ + { 0X00, 0X00, 0X04, 0X31 }, /* -120.0db */ + { 0X00, 0X00, 0X04, 0X71 }, /* -119.5db */ + { 0X00, 0X00, 0X04, 0XB4 }, /* -119.0db */ + { 0X00, 0X00, 0X04, 0XFC }, /* -118.5db */ + { 0X00, 0X00, 0X05, 0X47 }, /* -118.0db */ + { 0X00, 0X00, 0X05, 0X97 }, /* -117.5db */ + { 0X00, 0X00, 0X05, 0XEC }, /* -117.0db */ + { 0X00, 0X00, 0X06, 0X46 }, /* -116.5db */ + { 0X00, 0X00, 0X06, 0XA5 }, /* -116.0db */ + { 0X00, 0X00, 0X07, 0X0A }, /* -115.5db */ + { 0X00, 0X00, 0X07, 0X75 }, /* -115.0db */ + { 0X00, 0X00, 0X07, 0XE6 }, /* -114.5db */ + { 0X00, 0X00, 0X08, 0X5E }, /* -114.0db */ + { 0X00, 0X00, 0X08, 0XDD }, /* -113.5db */ + { 0X00, 0X00, 0X09, 0X63 }, /* -113.0db */ + { 0X00, 0X00, 0X09, 0XF2 }, /* -112.5db */ + { 0X00, 0X00, 0X0A, 0X89 }, /* -112.0db */ + { 0X00, 0X00, 0X0B, 0X28 }, /* -111.5db */ + { 0X00, 0X00, 0X0B, 0XD2 }, /* -111.0db */ + { 0X00, 0X00, 0X0C, 0X85 }, /* -110.5db */ + { 0X00, 0X00, 0X0D, 0X43 }, /* -110.0db */ + { 0X00, 0X00, 0X0E, 0X0C }, /* -109.5db */ + { 0X00, 0X00, 0X0E, 0XE1 }, /* -109.0db */ + { 0X00, 0X00, 0X0F, 0XC3 }, /* -108.5db */ + { 0X00, 0X00, 0X10, 0XB2 }, /* -108.0db */ + { 0X00, 0X00, 0X11, 0XAF }, /* -107.5db */ + { 0X00, 0X00, 0X12, 0XBC }, /* -107.0db */ + { 0X00, 0X00, 0X13, 0XD8 }, /* -106.5db */ + { 0X00, 0X00, 0X15, 0X05 }, /* -106.0db */ + { 0X00, 0X00, 0X16, 0X44 }, /* -105.5db */ + { 0X00, 0X00, 0X17, 0X96 }, /* -105.0db */ + { 0X00, 0X00, 0X18, 0XFB }, /* -104.5db */ + { 0X00, 0X00, 0X1A, 0X76 }, /* -104.0db */ + { 0X00, 0X00, 0X1C, 0X08 }, /* -103.5db */ + { 0X00, 0X00, 0X1D, 0XB1 }, /* -103.0db */ + { 0X00, 0X00, 0X1F, 0X73 }, /* -102.5db */ + { 0X00, 0X00, 0X21, 0X51 }, /* -102.0db */ + { 0X00, 0X00, 0X23, 0X4A }, /* -101.5db */ + { 0X00, 0X00, 0X25, 0X61 }, /* -101.0db */ + { 0X00, 0X00, 0X27, 0X98 }, /* -100.5db */ + { 0X00, 0X00, 0X29, 0XF1 }, /* -100.0db */ + { 0X00, 0X00, 0X2C, 0X6D }, /* -99.5db */ + { 0X00, 0X00, 0X2F, 0X0F }, /* -99.0db */ + { 0X00, 0X00, 0X31, 0XD9 }, /* -98.5db */ + { 0X00, 0X00, 0X34, 0XCD }, /* -98.0db */ + { 0X00, 0X00, 0X37, 0XEE }, /* -97.5db */ + { 0X00, 0X00, 0X3B, 0X3F }, /* -97.0db */ + { 0X00, 0X00, 0X3E, 0XC1 }, /* -96.5db */ + { 0X00, 0X00, 0X42, 0X79 }, /* -96.0db */ + { 0X00, 0X00, 0X46, 0X6A }, /* -95.5db */ + { 0X00, 0X00, 0X4A, 0X96 }, /* -95.0db */ + { 0X00, 0X00, 0X4F, 0X01 }, /* -94.5db */ + { 0X00, 0X00, 0X53, 0XAF }, /* -94.0db */ + { 0X00, 0X00, 0X58, 0XA5 }, /* -93.5db */ + { 0X00, 0X00, 0X5D, 0XE6 }, /* -93.0db */ + { 0X00, 0X00, 0X63, 0X76 }, /* -92.5db */ + { 0X00, 0X00, 0X69, 0X5B }, /* -92.0db */ + { 0X00, 0X00, 0X6F, 0X99 }, /* -91.5db */ + { 0X00, 0X00, 0X76, 0X36 }, /* -91.0db */ + { 0X00, 0X00, 0X7D, 0X37 }, /* -90.5db */ + { 0X00, 0X00, 0X84, 0XA2 }, /* -90.0db */ + { 0X00, 0X00, 0X8C, 0X7E }, /* -89.5db */ + { 0X00, 0X00, 0X94, 0XD1 }, /* -89.0db */ + { 0X00, 0X00, 0X9D, 0XA3 }, /* -88.5db */ + { 0X00, 0X00, 0XA6, 0XFA }, /* -88.0db */ + { 0X00, 0X00, 0XB0, 0XDF }, /* -87.5db */ + { 0X00, 0X00, 0XBB, 0X5A }, /* -87.0db */ + { 0X00, 0X00, 0XC6, 0X74 }, /* -86.5db */ + { 0X00, 0X00, 0XD2, 0X36 }, /* -86.0db */ + { 0X00, 0X00, 0XDE, 0XAB }, /* -85.5db */ + { 0X00, 0X00, 0XEB, 0XDC }, /* -85.0db */ + { 0X00, 0X00, 0XF9, 0XD6 }, /* -84.5db */ + { 0X00, 0X01, 0X08, 0XA4 }, /* -84.0db */ + { 0X00, 0X01, 0X18, 0X52 }, /* -83.5db */ + { 0X00, 0X01, 0X28, 0XEF }, /* -83.0db */ + { 0X00, 0X01, 0X3A, 0X87 }, /* -82.5db */ + { 0X00, 0X01, 0X4D, 0X2A }, /* -82.0db */ + { 0X00, 0X01, 0X60, 0XE8 }, /* -81.5db */ + { 0X00, 0X01, 0X75, 0XD1 }, /* -81.0db */ + { 0X00, 0X01, 0X8B, 0XF7 }, /* -80.5db */ + { 0X00, 0X01, 0XA3, 0X6E }, /* -80.0db */ + { 0X00, 0X01, 0XBC, 0X48 }, /* -79.5db */ + { 0X00, 0X01, 0XD6, 0X9B }, /* -79.0db */ + { 0X00, 0X01, 0XF2, 0X7E }, /* -78.5db */ + { 0X00, 0X02, 0X10, 0X08 }, /* -78.0db */ + { 0X00, 0X02, 0X2F, 0X51 }, /* -77.5db */ + { 0X00, 0X02, 0X50, 0X76 }, /* -77.0db */ + { 0X00, 0X02, 0X73, 0X91 }, /* -76.5db */ + { 0X00, 0X02, 0X98, 0XC0 }, /* -76.0db */ + { 0X00, 0X02, 0XC0, 0X24 }, /* -75.5db */ + { 0X00, 0X02, 0XE9, 0XDD }, /* -75.0db */ + { 0X00, 0X03, 0X16, 0X0F }, /* -74.5db */ + { 0X00, 0X03, 0X44, 0XDF }, /* -74.0db */ + { 0X00, 0X03, 0X76, 0X76 }, /* -73.5db */ + { 0X00, 0X03, 0XAA, 0XFC }, /* -73.0db */ + { 0X00, 0X03, 0XE2, 0XA0 }, /* -72.5db */ + { 0X00, 0X04, 0X1D, 0X8F }, /* -72.0db */ + { 0X00, 0X04, 0X5B, 0XFD }, /* -71.5db */ + { 0X00, 0X04, 0X9E, 0X1D }, /* -71.0db */ + { 0X00, 0X04, 0XE4, 0X29 }, /* -70.5db */ + { 0X00, 0X05, 0X2E, 0X5A }, /* -70.0db */ + { 0X00, 0X05, 0X7C, 0XF2 }, /* -69.5db */ + { 0X00, 0X05, 0XD0, 0X31 }, /* -69.0db */ + { 0X00, 0X06, 0X28, 0X60 }, /* -68.5db */ + { 0X00, 0X06, 0X85, 0XC8 }, /* -68.0db */ + { 0X00, 0X06, 0XE8, 0XB9 }, /* -67.5db */ + { 0X00, 0X07, 0X51, 0X86 }, /* -67.0db */ + { 0X00, 0X07, 0XC0, 0X8A }, /* -66.5db */ + { 0X00, 0X08, 0X36, 0X21 }, /* -66.0db */ + { 0X00, 0X08, 0XB2, 0XB0 }, /* -65.5db */ + { 0X00, 0X09, 0X36, 0XA1 }, /* -65.0db */ + { 0X00, 0X09, 0XC2, 0X63 }, /* -64.5db */ + { 0X00, 0X0A, 0X56, 0X6D }, /* -64.0db */ + { 0X00, 0X0A, 0XF3, 0X3C }, /* -63.5db */ + { 0X00, 0X0B, 0X99, 0X56 }, /* -63.0db */ + { 0X00, 0X0C, 0X49, 0X48 }, /* -62.5db */ + { 0X00, 0X0D, 0X03, 0XA7 }, /* -62.0db */ + { 0X00, 0X0D, 0XC9, 0X11 }, /* -61.5db */ + { 0X00, 0X0E, 0X9A, 0X2D }, /* -61.0db */ + { 0X00, 0X0F, 0X77, 0XAD }, /* -60.5db */ + { 0X00, 0X10, 0X62, 0X4D }, /* -60.0db */ + { 0X00, 0X11, 0X5A, 0XD5 }, /* -59.5db */ + { 0X00, 0X12, 0X62, 0X16 }, /* -59.0db */ + { 0X00, 0X13, 0X78, 0XF0 }, /* -58.5db */ + { 0X00, 0X14, 0XA0, 0X50 }, /* -58.0db */ + { 0X00, 0X15, 0XD9, 0X31 }, /* -57.5db */ + { 0X00, 0X17, 0X24, 0X9C }, /* -57.0db */ + { 0X00, 0X18, 0X83, 0XAA }, /* -56.5db */ + { 0X00, 0X19, 0XF7, 0X86 }, /* -56.0db */ + { 0X00, 0X1B, 0X81, 0X6A }, /* -55.5db */ + { 0X00, 0X1D, 0X22, 0XA4 }, /* -55.0db */ + { 0X00, 0X1E, 0XDC, 0X98 }, /* -54.5db */ + { 0X00, 0X20, 0XB0, 0XBC }, /* -54.0db */ + { 0X00, 0X22, 0XA0, 0X9D }, /* -53.5db */ + { 0X00, 0X24, 0XAD, 0XE0 }, /* -53.0db */ + { 0X00, 0X26, 0XDA, 0X43 }, /* -52.5db */ + { 0X00, 0X29, 0X27, 0X9D }, /* -52.0db */ + { 0X00, 0X2B, 0X97, 0XE3 }, /* -51.5db */ + { 0X00, 0X2E, 0X2D, 0X27 }, /* -51.0db */ + { 0X00, 0X30, 0XE9, 0X9A }, /* -50.5db */ + { 0X00, 0X33, 0XCF, 0X8D }, /* -50.0db */ + { 0X00, 0X36, 0XE1, 0X78 }, /* -49.5db */ + { 0X00, 0X3A, 0X21, 0XF3 }, /* -49.0db */ + { 0X00, 0X3D, 0X93, 0XC3 }, /* -48.5db */ + { 0X00, 0X41, 0X39, 0XD3 }, /* -48.0db */ + { 0X00, 0X45, 0X17, 0X3B }, /* -47.5db */ + { 0X00, 0X49, 0X2F, 0X44 }, /* -47.0db */ + { 0X00, 0X4D, 0X85, 0X66 }, /* -46.5db */ + { 0X00, 0X52, 0X1D, 0X50 }, /* -46.0db */ + { 0X00, 0X56, 0XFA, 0XE8 }, /* -45.5db */ + { 0X00, 0X5C, 0X22, 0X4E }, /* -45.0db */ + { 0X00, 0X61, 0X97, 0XE1 }, /* -44.5db */ + { 0X00, 0X67, 0X60, 0X44 }, /* -44.0db */ + { 0X00, 0X6D, 0X80, 0X60 }, /* -43.5db */ + { 0X00, 0X73, 0XFD, 0X65 }, /* -43.0db */ + { 0X00, 0X7A, 0XDC, 0XD7 }, /* -42.5db */ + { 0X00, 0X82, 0X24, 0X8A }, /* -42.0db */ + { 0X00, 0X89, 0XDA, 0XAB }, /* -41.5db */ + { 0X00, 0X92, 0X05, 0XC6 }, /* -41.0db */ + { 0X00, 0X9A, 0XAC, 0XC8 }, /* -40.5db */ + { 0X00, 0XA3, 0XD7, 0X0A }, /* -40.0db */ + { 0X00, 0XAD, 0X8C, 0X52 }, /* -39.5db */ + { 0X00, 0XB7, 0XD4, 0XDD }, /* -39.0db */ + { 0X00, 0XC2, 0XB9, 0X65 }, /* -38.5db */ + { 0X00, 0XCE, 0X43, 0X28 }, /* -38.0db */ + { 0X00, 0XDA, 0X7B, 0XF1 }, /* -37.5db */ + { 0X00, 0XE7, 0X6E, 0X1E }, /* -37.0db */ + { 0X00, 0XF5, 0X24, 0XAC }, /* -36.5db */ + { 0X01, 0X03, 0XAB, 0X3D }, /* -36.0db */ + { 0X01, 0X13, 0X0E, 0X24 }, /* -35.5db */ + { 0X01, 0X23, 0X5A, 0X71 }, /* -35.0db */ + { 0X01, 0X34, 0X9D, 0XF8 }, /* -34.5db */ + { 0X01, 0X46, 0XE7, 0X5D }, /* -34.0db */ + { 0X01, 0X5A, 0X46, 0X27 }, /* -33.5db */ + { 0X01, 0X6E, 0XCA, 0XC5 }, /* -33.0db */ + { 0X01, 0X84, 0X86, 0X9F }, /* -32.5db */ + { 0X01, 0X9B, 0X8C, 0X27 }, /* -32.0db */ + { 0X01, 0XB3, 0XEE, 0XE5 }, /* -31.5db */ + { 0X01, 0XCD, 0XC3, 0X8C }, /* -31.0db */ + { 0X01, 0XE9, 0X20, 0X05 }, /* -30.5db */ + { 0X02, 0X06, 0X1B, 0X89 }, /* -30.0db */ + { 0X02, 0X24, 0XCE, 0XB0 }, /* -29.5db */ + { 0X02, 0X45, 0X53, 0X85 }, /* -29.0db */ + { 0X02, 0X67, 0XC5, 0XA2 }, /* -28.5db */ + { 0X02, 0X8C, 0X42, 0X3F }, /* -28.0db */ + { 0X02, 0XB2, 0XE8, 0X55 }, /* -27.5db */ + { 0X02, 0XDB, 0XD8, 0XAD }, /* -27.0db */ + { 0X03, 0X07, 0X36, 0X05 }, /* -26.5db */ + { 0X03, 0X35, 0X25, 0X29 }, /* -26.0db */ + { 0X03, 0X65, 0XCD, 0X13 }, /* -25.5db */ + { 0X03, 0X99, 0X57, 0X0C }, /* -25.0db */ + { 0X03, 0XCF, 0XEE, 0XCF }, /* -24.5db */ + { 0X04, 0X09, 0XC2, 0XB0 }, /* -24.0db */ + { 0X04, 0X47, 0X03, 0XC1 }, /* -23.5db */ + { 0X04, 0X87, 0XE5, 0XFB }, /* -23.0db */ + { 0X04, 0XCC, 0XA0, 0X6D }, /* -22.5db */ + { 0X05, 0X15, 0X6D, 0X68 }, /* -22.0db */ + { 0X05, 0X62, 0X8A, 0XB3 }, /* -21.5db */ + { 0X05, 0XB4, 0X39, 0XBC }, /* -21.0db */ + { 0X06, 0X0A, 0XBF, 0XD4 }, /* -20.5db */ + { 0X06, 0X66, 0X66, 0X66 }, /* -20.0db */ + { 0X06, 0XC7, 0X7B, 0X36 }, /* -19.5db */ + { 0X07, 0X2E, 0X50, 0XA6 }, /* -19.0db */ + { 0X07, 0X9B, 0X3D, 0XF6 }, /* -18.5db */ + { 0X08, 0X0E, 0X9F, 0X96 }, /* -18.0db */ + { 0X08, 0X88, 0XD7, 0X6D }, /* -17.5db */ + { 0X09, 0X0A, 0X4D, 0X2F }, /* -17.0db */ + { 0X09, 0X93, 0X6E, 0XB8 }, /* -16.5db */ + { 0X0A, 0X24, 0XB0, 0X62 }, /* -16.0db */ + { 0X0A, 0XBE, 0X8D, 0X70 }, /* -15.5db */ + { 0X0B, 0X61, 0X88, 0X71 }, /* -15.0db */ + { 0X0C, 0X0E, 0X2B, 0XB0 }, /* -14.5db */ + { 0X0C, 0XC5, 0X09, 0XAB }, /* -14.0db */ + { 0X0D, 0X86, 0XBD, 0X8D }, /* -13.5db */ + { 0X0E, 0X53, 0XEB, 0XB3 }, /* -13.0db */ + { 0X0F, 0X2D, 0X42, 0X38 }, /* -12.5db */ + { 0X10, 0X13, 0X79, 0X87 }, /* -12.0db */ + { 0X11, 0X07, 0X54, 0XF9 }, /* -11.5db */ + { 0X12, 0X09, 0XA3, 0X7A }, /* -11.0db */ + { 0X13, 0X1B, 0X40, 0X39 }, /* -10.5db */ + { 0X14, 0X3D, 0X13, 0X62 }, /* -10.0db */ + { 0X15, 0X70, 0X12, 0XE1 }, /* -9.5db */ + { 0X16, 0XB5, 0X43, 0X37 }, /* -9.0db */ + { 0X18, 0X0D, 0XB8, 0X54 }, /* -8.5db */ + { 0X19, 0X7A, 0X96, 0X7F }, /* -8.0db */ + { 0X1A, 0XFD, 0X13, 0X54 }, /* -7.5db */ + { 0X1C, 0X96, 0X76, 0XC6 }, /* -7.0db */ + { 0X1E, 0X48, 0X1C, 0X37 }, /* -6.5db */ + { 0X20, 0X13, 0X73, 0X9E }, /* -6.0db */ + { 0X21, 0XFA, 0X02, 0XBF }, /* -5.5db */ + { 0X23, 0XFD, 0X66, 0X78 }, /* -5.0db */ + { 0X26, 0X1F, 0X54, 0X1C }, /* -4.5db */ + { 0X28, 0X61, 0X9A, 0XE9 }, /* -4.0db */ + { 0X2A, 0XC6, 0X25, 0X91 }, /* -3.5db */ + { 0X2D, 0X4E, 0XFB, 0XD5 }, /* -3.0db */ + { 0X2F, 0XFE, 0X44, 0X48 }, /* -2.5db */ + { 0X32, 0XD6, 0X46, 0X17 }, /* -2.0db */ + { 0X35, 0XD9, 0X6B, 0X02 }, /* -1.5db */ + { 0X39, 0X0A, 0X41, 0X5F }, /* -1.0db */ + { 0X3C, 0X6B, 0X7E, 0X4F }, /* -0.5db */ + { 0X40, 0X00, 0X00, 0X00 }, /* 0.0db */ + { 0X43, 0XCA, 0XD0, 0X22 }, /* 0.5db */ + { 0X47, 0XCF, 0X26, 0X7D }, /* 1.0db */ + { 0X4C, 0X10, 0X6B, 0XA5 }, /* 1.5db */ + { 0X50, 0X92, 0X3B, 0XE3 }, /* 2.0db */ + { 0X55, 0X58, 0X6A, 0X46 }, /* 2.5db */ + { 0X5A, 0X67, 0X03, 0XDF }, /* 3.0db */ + { 0X5F, 0XC2, 0X53, 0X32 }, /* 3.5db */ + { 0X65, 0X6E, 0XE3, 0XDB }, /* 4.0db */ + { 0X6B, 0X71, 0X86, 0X68 }, /* 4.5db */ + { 0X71, 0XCF, 0X54, 0X71 }, /* 5.0db */ + { 0X78, 0X8D, 0XB4, 0XE9 }, /* 5.5db */ + { 0X7F, 0XFF, 0XFF, 0XFF }, /* 6.0db */ +}; +#endif diff --git a/include/sound/tas2781-tlv.h b/include/sound/tas2781-tlv.h index 00fd4d449ff3..d87263e43fdb 100644 --- a/include/sound/tas2781-tlv.h +++ b/include/sound/tas2781-tlv.h @@ -17,265 +17,5 @@ static const __maybe_unused DECLARE_TLV_DB_SCALE(dvc_tlv, -10000, 100, 0); static const __maybe_unused DECLARE_TLV_DB_SCALE(amp_vol_tlv, 1100, 50, 0); -static const __maybe_unused DECLARE_TLV_DB_SCALE(tas2563_dvc_tlv, -12150, 50, 1); -/* pow(10, db/20) * pow(2,30) */ -static const __maybe_unused unsigned char tas2563_dvc_table[][4] = { - { 0X00, 0X00, 0X00, 0X00 }, /* -121.5db */ - { 0X00, 0X00, 0X03, 0XBC }, /* -121.0db */ - { 0X00, 0X00, 0X03, 0XF5 }, /* -120.5db */ - { 0X00, 0X00, 0X04, 0X31 }, /* -120.0db */ - { 0X00, 0X00, 0X04, 0X71 }, /* -119.5db */ - { 0X00, 0X00, 0X04, 0XB4 }, /* -119.0db */ - { 0X00, 0X00, 0X04, 0XFC }, /* -118.5db */ - { 0X00, 0X00, 0X05, 0X47 }, /* -118.0db */ - { 0X00, 0X00, 0X05, 0X97 }, /* -117.5db */ - { 0X00, 0X00, 0X05, 0XEC }, /* -117.0db */ - { 0X00, 0X00, 0X06, 0X46 }, /* -116.5db */ - { 0X00, 0X00, 0X06, 0XA5 }, /* -116.0db */ - { 0X00, 0X00, 0X07, 0X0A }, /* -115.5db */ - { 0X00, 0X00, 0X07, 0X75 }, /* -115.0db */ - { 0X00, 0X00, 0X07, 0XE6 }, /* -114.5db */ - { 0X00, 0X00, 0X08, 0X5E }, /* -114.0db */ - { 0X00, 0X00, 0X08, 0XDD }, /* -113.5db */ - { 0X00, 0X00, 0X09, 0X63 }, /* -113.0db */ - { 0X00, 0X00, 0X09, 0XF2 }, /* -112.5db */ - { 0X00, 0X00, 0X0A, 0X89 }, /* -112.0db */ - { 0X00, 0X00, 0X0B, 0X28 }, /* -111.5db */ - { 0X00, 0X00, 0X0B, 0XD2 }, /* -111.0db */ - { 0X00, 0X00, 0X0C, 0X85 }, /* -110.5db */ - { 0X00, 0X00, 0X0D, 0X43 }, /* -110.0db */ - { 0X00, 0X00, 0X0E, 0X0C }, /* -109.5db */ - { 0X00, 0X00, 0X0E, 0XE1 }, /* -109.0db */ - { 0X00, 0X00, 0X0F, 0XC3 }, /* -108.5db */ - { 0X00, 0X00, 0X10, 0XB2 }, /* -108.0db */ - { 0X00, 0X00, 0X11, 0XAF }, /* -107.5db */ - { 0X00, 0X00, 0X12, 0XBC }, /* -107.0db */ - { 0X00, 0X00, 0X13, 0XD8 }, /* -106.5db */ - { 0X00, 0X00, 0X15, 0X05 }, /* -106.0db */ - { 0X00, 0X00, 0X16, 0X44 }, /* -105.5db */ - { 0X00, 0X00, 0X17, 0X96 }, /* -105.0db */ - { 0X00, 0X00, 0X18, 0XFB }, /* -104.5db */ - { 0X00, 0X00, 0X1A, 0X76 }, /* -104.0db */ - { 0X00, 0X00, 0X1C, 0X08 }, /* -103.5db */ - { 0X00, 0X00, 0X1D, 0XB1 }, /* -103.0db */ - { 0X00, 0X00, 0X1F, 0X73 }, /* -102.5db */ - { 0X00, 0X00, 0X21, 0X51 }, /* -102.0db */ - { 0X00, 0X00, 0X23, 0X4A }, /* -101.5db */ - { 0X00, 0X00, 0X25, 0X61 }, /* -101.0db */ - { 0X00, 0X00, 0X27, 0X98 }, /* -100.5db */ - { 0X00, 0X00, 0X29, 0XF1 }, /* -100.0db */ - { 0X00, 0X00, 0X2C, 0X6D }, /* -99.5db */ - { 0X00, 0X00, 0X2F, 0X0F }, /* -99.0db */ - { 0X00, 0X00, 0X31, 0XD9 }, /* -98.5db */ - { 0X00, 0X00, 0X34, 0XCD }, /* -98.0db */ - { 0X00, 0X00, 0X37, 0XEE }, /* -97.5db */ - { 0X00, 0X00, 0X3B, 0X3F }, /* -97.0db */ - { 0X00, 0X00, 0X3E, 0XC1 }, /* -96.5db */ - { 0X00, 0X00, 0X42, 0X79 }, /* -96.0db */ - { 0X00, 0X00, 0X46, 0X6A }, /* -95.5db */ - { 0X00, 0X00, 0X4A, 0X96 }, /* -95.0db */ - { 0X00, 0X00, 0X4F, 0X01 }, /* -94.5db */ - { 0X00, 0X00, 0X53, 0XAF }, /* -94.0db */ - { 0X00, 0X00, 0X58, 0XA5 }, /* -93.5db */ - { 0X00, 0X00, 0X5D, 0XE6 }, /* -93.0db */ - { 0X00, 0X00, 0X63, 0X76 }, /* -92.5db */ - { 0X00, 0X00, 0X69, 0X5B }, /* -92.0db */ - { 0X00, 0X00, 0X6F, 0X99 }, /* -91.5db */ - { 0X00, 0X00, 0X76, 0X36 }, /* -91.0db */ - { 0X00, 0X00, 0X7D, 0X37 }, /* -90.5db */ - { 0X00, 0X00, 0X84, 0XA2 }, /* -90.0db */ - { 0X00, 0X00, 0X8C, 0X7E }, /* -89.5db */ - { 0X00, 0X00, 0X94, 0XD1 }, /* -89.0db */ - { 0X00, 0X00, 0X9D, 0XA3 }, /* -88.5db */ - { 0X00, 0X00, 0XA6, 0XFA }, /* -88.0db */ - { 0X00, 0X00, 0XB0, 0XDF }, /* -87.5db */ - { 0X00, 0X00, 0XBB, 0X5A }, /* -87.0db */ - { 0X00, 0X00, 0XC6, 0X74 }, /* -86.5db */ - { 0X00, 0X00, 0XD2, 0X36 }, /* -86.0db */ - { 0X00, 0X00, 0XDE, 0XAB }, /* -85.5db */ - { 0X00, 0X00, 0XEB, 0XDC }, /* -85.0db */ - { 0X00, 0X00, 0XF9, 0XD6 }, /* -84.5db */ - { 0X00, 0X01, 0X08, 0XA4 }, /* -84.0db */ - { 0X00, 0X01, 0X18, 0X52 }, /* -83.5db */ - { 0X00, 0X01, 0X28, 0XEF }, /* -83.0db */ - { 0X00, 0X01, 0X3A, 0X87 }, /* -82.5db */ - { 0X00, 0X01, 0X4D, 0X2A }, /* -82.0db */ - { 0X00, 0X01, 0X60, 0XE8 }, /* -81.5db */ - { 0X00, 0X01, 0X75, 0XD1 }, /* -81.0db */ - { 0X00, 0X01, 0X8B, 0XF7 }, /* -80.5db */ - { 0X00, 0X01, 0XA3, 0X6E }, /* -80.0db */ - { 0X00, 0X01, 0XBC, 0X48 }, /* -79.5db */ - { 0X00, 0X01, 0XD6, 0X9B }, /* -79.0db */ - { 0X00, 0X01, 0XF2, 0X7E }, /* -78.5db */ - { 0X00, 0X02, 0X10, 0X08 }, /* -78.0db */ - { 0X00, 0X02, 0X2F, 0X51 }, /* -77.5db */ - { 0X00, 0X02, 0X50, 0X76 }, /* -77.0db */ - { 0X00, 0X02, 0X73, 0X91 }, /* -76.5db */ - { 0X00, 0X02, 0X98, 0XC0 }, /* -76.0db */ - { 0X00, 0X02, 0XC0, 0X24 }, /* -75.5db */ - { 0X00, 0X02, 0XE9, 0XDD }, /* -75.0db */ - { 0X00, 0X03, 0X16, 0X0F }, /* -74.5db */ - { 0X00, 0X03, 0X44, 0XDF }, /* -74.0db */ - { 0X00, 0X03, 0X76, 0X76 }, /* -73.5db */ - { 0X00, 0X03, 0XAA, 0XFC }, /* -73.0db */ - { 0X00, 0X03, 0XE2, 0XA0 }, /* -72.5db */ - { 0X00, 0X04, 0X1D, 0X8F }, /* -72.0db */ - { 0X00, 0X04, 0X5B, 0XFD }, /* -71.5db */ - { 0X00, 0X04, 0X9E, 0X1D }, /* -71.0db */ - { 0X00, 0X04, 0XE4, 0X29 }, /* -70.5db */ - { 0X00, 0X05, 0X2E, 0X5A }, /* -70.0db */ - { 0X00, 0X05, 0X7C, 0XF2 }, /* -69.5db */ - { 0X00, 0X05, 0XD0, 0X31 }, /* -69.0db */ - { 0X00, 0X06, 0X28, 0X60 }, /* -68.5db */ - { 0X00, 0X06, 0X85, 0XC8 }, /* -68.0db */ - { 0X00, 0X06, 0XE8, 0XB9 }, /* -67.5db */ - { 0X00, 0X07, 0X51, 0X86 }, /* -67.0db */ - { 0X00, 0X07, 0XC0, 0X8A }, /* -66.5db */ - { 0X00, 0X08, 0X36, 0X21 }, /* -66.0db */ - { 0X00, 0X08, 0XB2, 0XB0 }, /* -65.5db */ - { 0X00, 0X09, 0X36, 0XA1 }, /* -65.0db */ - { 0X00, 0X09, 0XC2, 0X63 }, /* -64.5db */ - { 0X00, 0X0A, 0X56, 0X6D }, /* -64.0db */ - { 0X00, 0X0A, 0XF3, 0X3C }, /* -63.5db */ - { 0X00, 0X0B, 0X99, 0X56 }, /* -63.0db */ - { 0X00, 0X0C, 0X49, 0X48 }, /* -62.5db */ - { 0X00, 0X0D, 0X03, 0XA7 }, /* -62.0db */ - { 0X00, 0X0D, 0XC9, 0X11 }, /* -61.5db */ - { 0X00, 0X0E, 0X9A, 0X2D }, /* -61.0db */ - { 0X00, 0X0F, 0X77, 0XAD }, /* -60.5db */ - { 0X00, 0X10, 0X62, 0X4D }, /* -60.0db */ - { 0X00, 0X11, 0X5A, 0XD5 }, /* -59.5db */ - { 0X00, 0X12, 0X62, 0X16 }, /* -59.0db */ - { 0X00, 0X13, 0X78, 0XF0 }, /* -58.5db */ - { 0X00, 0X14, 0XA0, 0X50 }, /* -58.0db */ - { 0X00, 0X15, 0XD9, 0X31 }, /* -57.5db */ - { 0X00, 0X17, 0X24, 0X9C }, /* -57.0db */ - { 0X00, 0X18, 0X83, 0XAA }, /* -56.5db */ - { 0X00, 0X19, 0XF7, 0X86 }, /* -56.0db */ - { 0X00, 0X1B, 0X81, 0X6A }, /* -55.5db */ - { 0X00, 0X1D, 0X22, 0XA4 }, /* -55.0db */ - { 0X00, 0X1E, 0XDC, 0X98 }, /* -54.5db */ - { 0X00, 0X20, 0XB0, 0XBC }, /* -54.0db */ - { 0X00, 0X22, 0XA0, 0X9D }, /* -53.5db */ - { 0X00, 0X24, 0XAD, 0XE0 }, /* -53.0db */ - { 0X00, 0X26, 0XDA, 0X43 }, /* -52.5db */ - { 0X00, 0X29, 0X27, 0X9D }, /* -52.0db */ - { 0X00, 0X2B, 0X97, 0XE3 }, /* -51.5db */ - { 0X00, 0X2E, 0X2D, 0X27 }, /* -51.0db */ - { 0X00, 0X30, 0XE9, 0X9A }, /* -50.5db */ - { 0X00, 0X33, 0XCF, 0X8D }, /* -50.0db */ - { 0X00, 0X36, 0XE1, 0X78 }, /* -49.5db */ - { 0X00, 0X3A, 0X21, 0XF3 }, /* -49.0db */ - { 0X00, 0X3D, 0X93, 0XC3 }, /* -48.5db */ - { 0X00, 0X41, 0X39, 0XD3 }, /* -48.0db */ - { 0X00, 0X45, 0X17, 0X3B }, /* -47.5db */ - { 0X00, 0X49, 0X2F, 0X44 }, /* -47.0db */ - { 0X00, 0X4D, 0X85, 0X66 }, /* -46.5db */ - { 0X00, 0X52, 0X1D, 0X50 }, /* -46.0db */ - { 0X00, 0X56, 0XFA, 0XE8 }, /* -45.5db */ - { 0X00, 0X5C, 0X22, 0X4E }, /* -45.0db */ - { 0X00, 0X61, 0X97, 0XE1 }, /* -44.5db */ - { 0X00, 0X67, 0X60, 0X44 }, /* -44.0db */ - { 0X00, 0X6D, 0X80, 0X60 }, /* -43.5db */ - { 0X00, 0X73, 0XFD, 0X65 }, /* -43.0db */ - { 0X00, 0X7A, 0XDC, 0XD7 }, /* -42.5db */ - { 0X00, 0X82, 0X24, 0X8A }, /* -42.0db */ - { 0X00, 0X89, 0XDA, 0XAB }, /* -41.5db */ - { 0X00, 0X92, 0X05, 0XC6 }, /* -41.0db */ - { 0X00, 0X9A, 0XAC, 0XC8 }, /* -40.5db */ - { 0X00, 0XA3, 0XD7, 0X0A }, /* -40.0db */ - { 0X00, 0XAD, 0X8C, 0X52 }, /* -39.5db */ - { 0X00, 0XB7, 0XD4, 0XDD }, /* -39.0db */ - { 0X00, 0XC2, 0XB9, 0X65 }, /* -38.5db */ - { 0X00, 0XCE, 0X43, 0X28 }, /* -38.0db */ - { 0X00, 0XDA, 0X7B, 0XF1 }, /* -37.5db */ - { 0X00, 0XE7, 0X6E, 0X1E }, /* -37.0db */ - { 0X00, 0XF5, 0X24, 0XAC }, /* -36.5db */ - { 0X01, 0X03, 0XAB, 0X3D }, /* -36.0db */ - { 0X01, 0X13, 0X0E, 0X24 }, /* -35.5db */ - { 0X01, 0X23, 0X5A, 0X71 }, /* -35.0db */ - { 0X01, 0X34, 0X9D, 0XF8 }, /* -34.5db */ - { 0X01, 0X46, 0XE7, 0X5D }, /* -34.0db */ - { 0X01, 0X5A, 0X46, 0X27 }, /* -33.5db */ - { 0X01, 0X6E, 0XCA, 0XC5 }, /* -33.0db */ - { 0X01, 0X84, 0X86, 0X9F }, /* -32.5db */ - { 0X01, 0X9B, 0X8C, 0X27 }, /* -32.0db */ - { 0X01, 0XB3, 0XEE, 0XE5 }, /* -31.5db */ - { 0X01, 0XCD, 0XC3, 0X8C }, /* -31.0db */ - { 0X01, 0XE9, 0X20, 0X05 }, /* -30.5db */ - { 0X02, 0X06, 0X1B, 0X89 }, /* -30.0db */ - { 0X02, 0X24, 0XCE, 0XB0 }, /* -29.5db */ - { 0X02, 0X45, 0X53, 0X85 }, /* -29.0db */ - { 0X02, 0X67, 0XC5, 0XA2 }, /* -28.5db */ - { 0X02, 0X8C, 0X42, 0X3F }, /* -28.0db */ - { 0X02, 0XB2, 0XE8, 0X55 }, /* -27.5db */ - { 0X02, 0XDB, 0XD8, 0XAD }, /* -27.0db */ - { 0X03, 0X07, 0X36, 0X05 }, /* -26.5db */ - { 0X03, 0X35, 0X25, 0X29 }, /* -26.0db */ - { 0X03, 0X65, 0XCD, 0X13 }, /* -25.5db */ - { 0X03, 0X99, 0X57, 0X0C }, /* -25.0db */ - { 0X03, 0XCF, 0XEE, 0XCF }, /* -24.5db */ - { 0X04, 0X09, 0XC2, 0XB0 }, /* -24.0db */ - { 0X04, 0X47, 0X03, 0XC1 }, /* -23.5db */ - { 0X04, 0X87, 0XE5, 0XFB }, /* -23.0db */ - { 0X04, 0XCC, 0XA0, 0X6D }, /* -22.5db */ - { 0X05, 0X15, 0X6D, 0X68 }, /* -22.0db */ - { 0X05, 0X62, 0X8A, 0XB3 }, /* -21.5db */ - { 0X05, 0XB4, 0X39, 0XBC }, /* -21.0db */ - { 0X06, 0X0A, 0XBF, 0XD4 }, /* -20.5db */ - { 0X06, 0X66, 0X66, 0X66 }, /* -20.0db */ - { 0X06, 0XC7, 0X7B, 0X36 }, /* -19.5db */ - { 0X07, 0X2E, 0X50, 0XA6 }, /* -19.0db */ - { 0X07, 0X9B, 0X3D, 0XF6 }, /* -18.5db */ - { 0X08, 0X0E, 0X9F, 0X96 }, /* -18.0db */ - { 0X08, 0X88, 0XD7, 0X6D }, /* -17.5db */ - { 0X09, 0X0A, 0X4D, 0X2F }, /* -17.0db */ - { 0X09, 0X93, 0X6E, 0XB8 }, /* -16.5db */ - { 0X0A, 0X24, 0XB0, 0X62 }, /* -16.0db */ - { 0X0A, 0XBE, 0X8D, 0X70 }, /* -15.5db */ - { 0X0B, 0X61, 0X88, 0X71 }, /* -15.0db */ - { 0X0C, 0X0E, 0X2B, 0XB0 }, /* -14.5db */ - { 0X0C, 0XC5, 0X09, 0XAB }, /* -14.0db */ - { 0X0D, 0X86, 0XBD, 0X8D }, /* -13.5db */ - { 0X0E, 0X53, 0XEB, 0XB3 }, /* -13.0db */ - { 0X0F, 0X2D, 0X42, 0X38 }, /* -12.5db */ - { 0X10, 0X13, 0X79, 0X87 }, /* -12.0db */ - { 0X11, 0X07, 0X54, 0XF9 }, /* -11.5db */ - { 0X12, 0X09, 0XA3, 0X7A }, /* -11.0db */ - { 0X13, 0X1B, 0X40, 0X39 }, /* -10.5db */ - { 0X14, 0X3D, 0X13, 0X62 }, /* -10.0db */ - { 0X15, 0X70, 0X12, 0XE1 }, /* -9.5db */ - { 0X16, 0XB5, 0X43, 0X37 }, /* -9.0db */ - { 0X18, 0X0D, 0XB8, 0X54 }, /* -8.5db */ - { 0X19, 0X7A, 0X96, 0X7F }, /* -8.0db */ - { 0X1A, 0XFD, 0X13, 0X54 }, /* -7.5db */ - { 0X1C, 0X96, 0X76, 0XC6 }, /* -7.0db */ - { 0X1E, 0X48, 0X1C, 0X37 }, /* -6.5db */ - { 0X20, 0X13, 0X73, 0X9E }, /* -6.0db */ - { 0X21, 0XFA, 0X02, 0XBF }, /* -5.5db */ - { 0X23, 0XFD, 0X66, 0X78 }, /* -5.0db */ - { 0X26, 0X1F, 0X54, 0X1C }, /* -4.5db */ - { 0X28, 0X61, 0X9A, 0XE9 }, /* -4.0db */ - { 0X2A, 0XC6, 0X25, 0X91 }, /* -3.5db */ - { 0X2D, 0X4E, 0XFB, 0XD5 }, /* -3.0db */ - { 0X2F, 0XFE, 0X44, 0X48 }, /* -2.5db */ - { 0X32, 0XD6, 0X46, 0X17 }, /* -2.0db */ - { 0X35, 0XD9, 0X6B, 0X02 }, /* -1.5db */ - { 0X39, 0X0A, 0X41, 0X5F }, /* -1.0db */ - { 0X3C, 0X6B, 0X7E, 0X4F }, /* -0.5db */ - { 0X40, 0X00, 0X00, 0X00 }, /* 0.0db */ - { 0X43, 0XCA, 0XD0, 0X22 }, /* 0.5db */ - { 0X47, 0XCF, 0X26, 0X7D }, /* 1.0db */ - { 0X4C, 0X10, 0X6B, 0XA5 }, /* 1.5db */ - { 0X50, 0X92, 0X3B, 0XE3 }, /* 2.0db */ - { 0X55, 0X58, 0X6A, 0X46 }, /* 2.5db */ - { 0X5A, 0X67, 0X03, 0XDF }, /* 3.0db */ - { 0X5F, 0XC2, 0X53, 0X32 }, /* 3.5db */ - { 0X65, 0X6E, 0XE3, 0XDB }, /* 4.0db */ - { 0X6B, 0X71, 0X86, 0X68 }, /* 4.5db */ - { 0X71, 0XCF, 0X54, 0X71 }, /* 5.0db */ - { 0X78, 0X8D, 0XB4, 0XE9 }, /* 5.5db */ - { 0XFF, 0XFF, 0XFF, 0XFF }, /* 6.0db */ -}; #endif diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c index e79d613745b4..8a57c045afdd 100644 --- a/sound/soc/codecs/tas2781-i2c.c +++ b/sound/soc/codecs/tas2781-i2c.c @@ -30,6 +30,7 @@ #include <sound/soc.h> #include <sound/tas2781.h> #include <sound/tlv.h> +#include <sound/tas2563-tlv.h> #include <sound/tas2781-tlv.h> #include <asm/unaligned.h> -- 2.34.1

2 1

[PATCH -next] ASoC: fsl: lpc3xxx: Make some symbols static
by Yue Haibing 02 Aug '24

02 Aug '24

These symbols are not used outside of the files, make them static to fix sparse warnings: sound/soc/fsl/lpc3xxx-i2s.c:261:30: warning: symbol 'lpc3xxx_i2s_dai_ops' was not declared. Should it be static? sound/soc/fsl/lpc3xxx-i2s.c:271:27: warning: symbol 'lpc3xxx_i2s_dai_driver' was not declared. Should it be static? sound/soc/fsl/lpc3xxx-pcm.c:55:39: warning: symbol 'lpc3xxx_soc_platform_driver' was not declared. Should it be static? Signed-off-by: Yue Haibing <yuehaibing(a)huawei.com> --- sound/soc/fsl/lpc3xxx-i2s.c | 4 ++-- sound/soc/fsl/lpc3xxx-pcm.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/fsl/lpc3xxx-i2s.c b/sound/soc/fsl/lpc3xxx-i2s.c index 62ef624d6dd4..bdb320bb3719 100644 --- a/sound/soc/fsl/lpc3xxx-i2s.c +++ b/sound/soc/fsl/lpc3xxx-i2s.c @@ -258,7 +258,7 @@ static int lpc3xxx_i2s_dai_probe(struct snd_soc_dai *dai) return 0; } -const struct snd_soc_dai_ops lpc3xxx_i2s_dai_ops = { +static const struct snd_soc_dai_ops lpc3xxx_i2s_dai_ops = { .probe = lpc3xxx_i2s_dai_probe, .startup = lpc3xxx_i2s_startup, .shutdown = lpc3xxx_i2s_shutdown, @@ -268,7 +268,7 @@ const struct snd_soc_dai_ops lpc3xxx_i2s_dai_ops = { .set_fmt = lpc3xxx_i2s_set_dai_fmt, }; -struct snd_soc_dai_driver lpc3xxx_i2s_dai_driver = { +static struct snd_soc_dai_driver lpc3xxx_i2s_dai_driver = { .playback = { .channels_min = 1, .channels_max = 2, diff --git a/sound/soc/fsl/lpc3xxx-pcm.c b/sound/soc/fsl/lpc3xxx-pcm.c index c0d499b9b8ba..e6abaf63895a 100644 --- a/sound/soc/fsl/lpc3xxx-pcm.c +++ b/sound/soc/fsl/lpc3xxx-pcm.c @@ -52,7 +52,7 @@ static const struct snd_dmaengine_pcm_config lpc3xxx_dmaengine_pcm_config = { .prealloc_buffer_size = 128 * 1024, }; -const struct snd_soc_component_driver lpc3xxx_soc_platform_driver = { +static const struct snd_soc_component_driver lpc3xxx_soc_platform_driver = { .name = "lpc32xx-pcm", }; -- 2.34.1

2 1

[PATCH 00/12] ALSA/ASoC: use snd_pcm_direction_name()
by Kuninori Morimoto 02 Aug '24

02 Aug '24

Hi Tatasi, Mark Many drivers are selecting strings "playback" / "capture" by own handling, but we have snd_pcm_direction_name() function for it. This patch use it. One note is that snd_pcm_direction_name() will select "Playback" and "Capture", instead of "playback" / "capture". Almost all drivers are using it as dev_dbg() or dev_err() so no problem. But some other drivers are using it as other purpose. It might be issue (?). For example ASoC debugfs dir name will be changed by this patch. Kuninori Morimoto (12): ALSA: pci: pcxhr: use snd_pcm_direction_name() ALSA: pci: rme9652: use snd_pcm_direction_name() ALSA: trace: use snd_pcm_direction_name() ALSA: aloop: use snd_pcm_direction_name() ALSA: pcm_timer: use snd_pcm_direction_name() ASoC: stm: use snd_pcm_direction_name() ASoC: sof: pcm: use snd_pcm_direction_name() ASoC: sof: intel: use snd_pcm_direction_name() ASoC: fsl: lpc3xxx-i2s: use snd_pcm_direction_name() ASoC: tegra: use snd_pcm_direction_name() ASoC: soc-pcm: use snd_pcm_direction_name() ASoC: soc-dapm: use snd_pcm_direction_name() include/trace/events/asoc.h | 3 ++- sound/core/pcm_timer.c | 3 +-- sound/drivers/aloop.c | 3 +-- sound/pci/pcxhr/pcxhr_mix22.c | 2 +- sound/pci/rme9652/hdspm.c | 6 ++---- sound/soc/fsl/lpc3xxx-i2s.c | 3 +-- sound/soc/soc-dapm.c | 3 +-- sound/soc/soc-pcm.c | 30 +++++++++++++++--------------- sound/soc/sof/intel/hda-stream.c | 4 +--- sound/soc/sof/pcm.c | 2 +- sound/soc/stm/stm32_i2s.c | 4 ++-- sound/soc/tegra/tegra210_i2s.c | 16 ++++++++-------- 12 files changed, 36 insertions(+), 43 deletions(-) -- 2.43.0

3 14

[PATCH RESEND 00/31] AMD SOF based generic SoundWire machine driver
by Vijendar Mukunda 02 Aug '24

02 Aug '24

This patch series majorly consists of below changes. - Rename structures, macros and codec helper names used in Intel SoundWire generic driver to make it generic. - Move Intel SoundWire driver common structures, macros and codec helper functions to common placeholder so that it can be used by other platform machine driver. - Refactor few SoundWire common codec helper functions. - AMD SOF based generic SoundWire machine driver for ACP 6.3 variant. This work started a couple of months ago to avoid duplication of code that wasn't really Intel-specific in the "sof_sdw" machine driver. The code went through multiple iterations, was tested for multiple weeks and a couple of build issues reported by the Intel kbuild bots were corrected. This is the initial version of SoundWire machine driver for AMD platforms. Additional code refactoring will be done in the next step on the AMD side. Link: https://github.com/thesofproject/linux/pull/5068 Reviewed-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Vijendar Mukunda (31): ASoC: intel: rename codec_info and dai_info structures names ASoC: intel: rename soundwire common header macros ASoC: intel: rename soundwire machine driver soc ops ASoC: intel: rename soundwire codec helper functions ASoC: intel: rename maxim codec macros ASoC: intel: rename ignore_pch_dmic variable name ASoC: intel/sdw-utils: move soundwire machine driver soc ops ASoC: intel: move soundwire machine driver common structures ASoC: intel/sdw_utils: move soundwire machine driver helper functions ASoC: intel/sdw_utils: move dmic codec helper function ASoC: intel/sdw_utils: move rtk dmic helper functions ASoC: intel/sdw_utils: move rt712 sdca helper functions ASoC: intel/sdw_utils: move rt722 sdca helper functions ASoC: intel: split soundwire machine driver private data ASoC: intel/sdw_utils: move rt5682 codec helper function ASoC: intel/sdw_utils: move rtk jack common helper functions ASoC: intel/sdw_utils: move rt700 and rt711 codec helper functions ASoC: intel/sdw_utils: move rtk amp codec helper functions ASoC: intel/sdw_utils: move cirrus soundwire codec helper functions ASoC: intel/sdw_utils: move maxim codec helper functions ASoC: intel/sdw_utils: move dai id common macros ASoC: intel/sdw_utils: move soundwire dai type macros ASoC: intel/sdw_utils: move soundwire codec_info_list structure ASoC: intel/sdw_utils: move machine driver dai link helper functions ASoC: sdw_utils: refactor sof_sdw_card_late_probe function ASoC: intel/sdw_utils: refactor init_dai_link() and init_simple_dai_link() ASoC: soc-acpi: add pci revision id field in mach params structure ASoC: amd: acp: add soundwire machines for acp6.3 based platform ASoC: SOF: amd: add alternate machines for acp6.3 based platform ASoC: SOF: amd: update mach params subsystem_rev variable ASoC: amd/sdw_utils: add sof based soundwire generic machine driver include/sound/soc-acpi.h | 2 + include/sound/soc_sdw_utils.h | 216 ++++ sound/soc/Kconfig | 2 + sound/soc/Makefile | 1 + sound/soc/amd/acp/Kconfig | 22 + sound/soc/amd/acp/Makefile | 4 + sound/soc/amd/acp/acp-sdw-sof-mach.c | 742 +++++++++++ sound/soc/amd/acp/amd-acp63-acpi-match.c | 90 ++ sound/soc/amd/acp/soc_amd_sdw_common.h | 44 + sound/soc/amd/mach-config.h | 1 + sound/soc/intel/boards/Kconfig | 1 + sound/soc/intel/boards/Makefile | 9 - sound/soc/intel/boards/sof_sdw.c | 1142 ++--------------- sound/soc/intel/boards/sof_sdw_common.h | 166 +-- sound/soc/intel/boards/sof_sdw_hdmi.c | 14 +- sound/soc/sdw_utils/Kconfig | 6 + sound/soc/sdw_utils/Makefile | 11 + .../soc_sdw_bridge_cs35l56.c} | 56 +- .../soc_sdw_cs42l42.c} | 13 +- .../soc_sdw_cs42l43.c} | 38 +- .../soc_sdw_cs_amp.c} | 18 +- .../soc_sdw_dmic.c} | 10 +- .../soc_sdw_maxim.c} | 56 +- .../soc_sdw_rt5682.c} | 12 +- .../soc_sdw_rt700.c} | 12 +- .../soc_sdw_rt711.c} | 38 +- .../soc_sdw_rt712_sdca.c} | 10 +- .../soc_sdw_rt722_sdca.c} | 10 +- .../soc_sdw_rt_amp.c} | 32 +- .../soc_sdw_rt_amp_coeff_tables.h} | 6 +- .../soc_sdw_rt_dmic.c} | 11 +- .../soc_sdw_rt_sdca_jack_common.c} | 40 +- sound/soc/sdw_utils/soc_sdw_utils.c | 990 ++++++++++++++ sound/soc/sof/amd/Kconfig | 1 + sound/soc/sof/amd/acp-common.c | 3 + sound/soc/sof/amd/acp.c | 1 + sound/soc/sof/amd/acp.h | 1 + sound/soc/sof/amd/pci-acp63.c | 1 + 38 files changed, 2475 insertions(+), 1357 deletions(-) create mode 100644 include/sound/soc_sdw_utils.h create mode 100644 sound/soc/amd/acp/acp-sdw-sof-mach.c create mode 100644 sound/soc/amd/acp/amd-acp63-acpi-match.c create mode 100644 sound/soc/amd/acp/soc_amd_sdw_common.h create mode 100644 sound/soc/sdw_utils/Kconfig create mode 100644 sound/soc/sdw_utils/Makefile rename sound/soc/{intel/boards/bridge_cs35l56.c => sdw_utils/soc_sdw_bridge_cs35l56.c} (63%) rename sound/soc/{intel/boards/sof_sdw_cs42l42.c => sdw_utils/soc_sdw_cs42l42.c} (82%) rename sound/soc/{intel/boards/sof_sdw_cs42l43.c => sdw_utils/soc_sdw_cs42l43.c} (73%) rename sound/soc/{intel/boards/sof_sdw_cs_amp.c => sdw_utils/soc_sdw_cs_amp.c} (66%) rename sound/soc/{intel/boards/sof_sdw_dmic.c => sdw_utils/soc_sdw_dmic.c} (71%) rename sound/soc/{intel/boards/sof_sdw_maxim.c => sdw_utils/soc_sdw_maxim.c} (63%) rename sound/soc/{intel/boards/sof_sdw_rt5682.c => sdw_utils/soc_sdw_rt5682.c} (82%) rename sound/soc/{intel/boards/sof_sdw_rt700.c => sdw_utils/soc_sdw_rt700.c} (81%) rename sound/soc/{intel/boards/sof_sdw_rt711.c => sdw_utils/soc_sdw_rt711.c} (70%) rename sound/soc/{intel/boards/sof_sdw_rt712_sdca.c => sdw_utils/soc_sdw_rt712_sdca.c} (74%) rename sound/soc/{intel/boards/sof_sdw_rt722_sdca.c => sdw_utils/soc_sdw_rt722_sdca.c} (68%) rename sound/soc/{intel/boards/sof_sdw_rt_amp.c => sdw_utils/soc_sdw_rt_amp.c} (87%) rename sound/soc/{intel/boards/sof_sdw_amp_coeff_tables.h => sdw_utils/soc_sdw_rt_amp_coeff_tables.h} (97%) rename sound/soc/{intel/boards/sof_sdw_rt_dmic.c => sdw_utils/soc_sdw_rt_dmic.c} (70%) rename sound/soc/{intel/boards/sof_sdw_rt_sdca_jack_common.c => sdw_utils/soc_sdw_rt_sdca_jack_common.c} (78%) create mode 100644 sound/soc/sdw_utils/soc_sdw_utils.c -- 2.34.1

4 34

common: pcm: hdmi/sof-hda-dsp/sof-soundwire: Syntax 7 dependent macro to generate the hdmi device sections
by GitHub pull_request - edited 02 Aug '24

02 Aug '24

alsa-project/alsa-ucm-conf pull request #413 was edited from ujfalusi: Hi, The PR will introduce a generic `HdmiDevice` macro, which can replace duplicated conditions in sof UCM files and potentially used by other devices to generate the needed section for the hdmi PCM devices to allow passthrough. The PR is marked as DNM and is in draft since the change depends on Syntax 7 support, which is only available in git version of alsa-lib, it is not a simple ask for a user (or developer) to use it and the change would break UCM for released alsa-lib. @perexg, is this something that you were suggesting? I think the macro and it's definition is generic enough, I hope that it will be usable for non SOF setups. Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/413 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/413.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

common: pcm/split: add support up to 32 / 8 channels
by GitHub pull_request - edited 02 Aug '24

02 Aug '24

alsa-project/alsa-ucm-conf pull request #417 was edited from perexg: **DO NOT MERGE - after 1.2.12!** MOTU 828 has up to 32 hardware channels. Add support for this configuration to common/pcm/split.conf. Also, add support for up to 8 channels for the abstact devices (like 7.1 surround). Note that this change requires recent alsa-lib (Syntax 7). Link: https://github.com/alsa-project/alsa-ucm-conf/pull/416 Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/417 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/417.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Lag between microphone and speaker
by Guillermo Bernaldo de Quiros Maraver 02 Aug '24

02 Aug '24

Hi, good afternoon! First of all, I'm new to the mailing list so I'm not sure if this is the correct place to ask this question. I ask it here because I don't know a better place to ask it so, if this is not the correct place, please let me know. The thing is, I have a USB sound card plugged to a Beaglebone AI64. This works correctly (I mean, I can record my voice and I can play a wav file without problems. using the arecord and aplay tools) The problem comes with a software I'm writing which needs to read audio from the microphone, then do a process (which takes less than 20ms) and then, after that process, I have to write the audio to the speaker. The software, right now, consists of several files, but, the most important components of the software are Recorder and Player CPP classes which I show you at the end. The important part is the next: 1º I init the alsa context using the next calls: audioPlayer.OpenDevice("plughw:CARD=Device,DEV=0"); micRecorder.OpenDevice("plughw:CARD=Device,DEV=0"); 2º I'm using the sample rate of 16KHz, a sample size of 16bit and 1 channel. So, assuming I've done correctly, this should give me a total frame rate of 342 samples, then, if I multiply it by 2 bytes, I get 684 bytes of total size. 3º Finally, in the main, I do the next thing: while(1) { //bool keyPressed = id.IsKeyPressed(0); //printf("Key is pressed: %s\n", keyPressed ? "true" : "false"); const int8_t *pAudioBuffer = micRecorder.ReadAudio(); if(pAudioBuffer) { // Process a single frame of audio // Note: output_frame can be the same buffer as input_frame for in-place processing if(keyPressed) { // DO A PROCESS WHICH TAKES 19ms more or less } else { memcpy(buff_in,pAudioBuffer, buff_size); } // Opcionalmente, leemos/escribinos de/a fichero. //write(noisy_raw_fd, pAudioBuffer, micRecorder.GetBufferSize()); //write(clean_raw_fd, g_out_buffer, g_out_buffer_size); if(audioPlayer.WriteAudio((int8_t*)buff_in)<0) { return 1; } } //printf("Numero de frames escritos: %d del total de: %d\n", pcm, frames); } This works correctly, the problem is after some time I start to note that there is a difference of time between my speaking and my listening and I don't know why. I've enabled all traces in both the recorder and the player, but I don't see any error. Is just that there is a difference between my speaking and my listening. The difference is up to 10 seconds or more. Please, can anyone help me with this problem? PD: Please, be aware I'm just a software engineer, I'm not an expert in all technical stuff related to audio. I did this code based on some examples I found on internet which are: I used this code to implement the player class: https://gist.github.com/ghedo/963382/815c98d1ba0eda1b486eb9d80d9a91a81d9952… I used this code to implement the recorder class: https://gist.github.com/albanpeignier/104902 Here is the code // Player.h #pragma once #include <iostream> #include <string> #include <alsa/asoundlib.h> #define SAMPLE_RATE 16000 #define FRAME_SIZE 342 #define CHANNELS 1 class Player { public: Player(const std::string &devname = "", int sampleRate = SAMPLE_RATE, int channels = CHANNELS); ~Player(); int OpenDevice(const std::string &devname = "", int sampleRate = SAMPLE_RATE, int channels = CHANNELS); void CloseDevice(); size_t GetFrameSize(); size_t GetBufferSize(); int WriteAudio(const int8_t *pAudioBuffer); private: int InitAudioContext(); private: int m_SampleRate; int m_Channels; std::string m_DevName; snd_pcm_t *m_AudioHandle; size_t m_FrameBufferSize; size_t m_BufferSize; int8_t *m_pAudioBuffer; }; // Player.cpp #include "Player.h" Player::Player(const std::string &devname, int sampleRate, int channels): m_DevName{devname}, m_SampleRate{sampleRate}, m_Channels{channels}, m_AudioHandle{nullptr}, m_FrameBufferSize{FRAME_SIZE} { } Player::~Player() { CloseDevice(); } int Player::OpenDevice(const std::string &devname, int sampleRate, int channels) { if(!devname.empty()) m_DevName = devname; if(sampleRate != SAMPLE_RATE) m_SampleRate = sampleRate; if(channels != CHANNELS) m_Channels = channels; return InitAudioContext(); } void Player::CloseDevice() { std::cout << "buffer freed" << std::endl; snd_pcm_close (m_AudioHandle); //free(m_pAudioBuffer); std::cout << "audio interface closed" << std::endl; } size_t Player::GetFrameSize() { return m_FrameBufferSize; } size_t Player::GetBufferSize() { return m_BufferSize; } int Player::WriteAudio(const int8_t *pAudioBuffer) { int pcm; if (pcm = snd_pcm_writei(m_AudioHandle, pAudioBuffer, FRAME_SIZE) == -EPIPE) { printf("XRUN.\n"); snd_pcm_prepare(m_AudioHandle); } else if (pcm < 0) { printf("ERROR. Can't write to PCM device. %s\n", snd_strerror(pcm)); return 0; } return 1; } int Player::InitAudioContext() { std::cout << "Iniciando Player" << std::endl; int i; int err; snd_pcm_hw_params_t *hw_params; snd_pcm_format_t format = SND_PCM_FORMAT_S16_LE; if ((err = snd_pcm_open (&m_AudioHandle, m_DevName.c_str(), SND_PCM_STREAM_PLAYBACK, 0)) < 0) { std::cerr << "cannot open audio device " << m_DevName << " Error: " << snd_strerror (err) << std::endl; return (1); } std::cout << "audio interface opened" << std::endl; if ((err = snd_pcm_hw_params_malloc (&hw_params)) < 0) { std::cerr << "cannot allocate hardware parameters structure: " << snd_strerror(err) << std::endl; return (1); } std::cout << "hw_params allocated" << std::endl; if ((err = snd_pcm_hw_params_any (m_AudioHandle, hw_params)) < 0) { std::cerr << "cannot initialize hardware parameter structure: " << snd_strerror(err) << std::endl; return (1); } std::cout << "hw_params initialized" << std::endl; if ((err = snd_pcm_hw_params_set_access (m_AudioHandle, hw_params, SND_PCM_ACCESS_RW_INTERLEAVED)) < 0) { std::cerr << "cannot set access type: " << snd_strerror (err) << std::endl; return (1); } std::cout << "hw_params access setted" << std::endl; if ((err = snd_pcm_hw_params_set_format (m_AudioHandle, hw_params, format)) < 0) { std::cerr << "cannot set sample format: " << snd_strerror (err) << std::endl; return (1); } std::cout << "hw_params format setted" << std::endl; if ((err = snd_pcm_hw_params_set_rate_near (m_AudioHandle, hw_params, (unsigned int *)&m_SampleRate, 0)) < 0) { std::cerr << "cannot set sample rate: " << snd_strerror (err) << std::endl; return (1); } std::cout << "hw_params rate setted" << std::endl; if ((err = snd_pcm_hw_params_set_channels (m_AudioHandle, hw_params, CHANNELS)) < 0) { std::cerr << "cannot set channel count: " << snd_strerror (err) << std::endl; return (1); } std::cout << "hw_params channels setted" << std::endl; if ((err = snd_pcm_hw_params (m_AudioHandle, hw_params)) < 0) { std::cerr << "cannot set parameters: " << snd_strerror (err) << std::endl; return (1); } std::cout << "hw_params setted" << std::endl; snd_pcm_hw_params_free (hw_params); std::cout << "hw_params freed" << std::endl; if ((err = snd_pcm_prepare (m_AudioHandle)) < 0) { std::cerr << "cannot prepare audio interface for use: " << snd_strerror (err) << std::endl; return (1); } std::cout << "audio interface prepared" << std::endl; std::cout << "format width: " << snd_pcm_format_width(format) << std::endl; // Tamaño total en bytes del buffer de memoria reservado m_BufferSize = m_FrameBufferSize * snd_pcm_format_width(SND_PCM_FORMAT_S16_LE) / 8 * CHANNELS; return 0; } // Recorder.h #pragma once #include <iostream> #include <string> #include <alsa/asoundlib.h> #define SAMPLE_RATE 16000 #define FRAME_SIZE 342 #define CHANNELS 1 class Recorder { public: Recorder(const std::string &devname = "", int sampleRate = SAMPLE_RATE, int channels = CHANNELS); ~Recorder(); int OpenDevice(const std::string &devname = "", int sampleRate = SAMPLE_RATE, int channels = CHANNELS); void CloseDevice(); size_t GetFrameSize(); size_t GetBufferSize(); const int8_t *ReadAudio(); private: int InitAudioContext(); private: int m_SampleRate; int m_Channels; std::string m_DevName; snd_pcm_t *m_AudioHandle; size_t m_FrameBufferSize; size_t m_BufferSize; int8_t *m_pAudioBuffer; }; // Recorder.cpp #include "Recorder.h" /* * Recuperacion ante errores de alsa. */ static int xrun_recovery(snd_pcm_t *handle, int err) { if (err == -EPIPE) { /* under-run */ printf("underrun!\n"); err = snd_pcm_prepare(handle); if (err < 0) printf("Can't recovery from underrun, prepare failed: %s\n", snd_strerror(err)); return 0; } else if (err == -ESTRPIPE) { while ((err = snd_pcm_resume(handle)) == -EAGAIN) sleep(1); /* wait until the suspend flag is released */ if (err < 0) { err = snd_pcm_prepare(handle); if (err < 0) printf("Can't recovery from suspend, prepare failed: %s\n", snd_strerror(err)); } return 0; } return err; } Recorder::Recorder(const std::string &devname, int sampleRate, int channels): m_DevName{devname}, m_SampleRate{sampleRate}, m_Channels{channels}, m_AudioHandle{nullptr}, m_FrameBufferSize{FRAME_SIZE} { } Recorder::~Recorder() { CloseDevice(); } int Recorder::OpenDevice(const std::string &devname, int sampleRate, int channels) { if(!devname.empty()) m_DevName = devname; if(sampleRate != SAMPLE_RATE) m_SampleRate = sampleRate; if(channels != CHANNELS) m_Channels = channels; return InitAudioContext(); } size_t Recorder::GetFrameSize() { return m_FrameBufferSize; } /* * Tamaño total en bytes del buffer de memoria reservado */ size_t Recorder::GetBufferSize() { return m_BufferSize; } /* * Lee en el puntero de memoria resevado, las muestras de audio leidas de la capturadora de audio (microfono). */ const int8_t *Recorder::ReadAudio() { int err; if ((err = snd_pcm_readi(m_AudioHandle, m_pAudioBuffer, m_FrameBufferSize)) != m_FrameBufferSize) { // Si el error es de tipo PIPE o STRPIPE, tratamos de recuperar el dispositivo. if(xrun_recovery(m_AudioHandle, err) < 0) { std::cerr << "read from audio interface failed " << snd_strerror(err) << std::endl; return nullptr; } } return m_pAudioBuffer; } void Recorder::CloseDevice() { std::cout << "buffer freed" << std::endl; snd_pcm_close (m_AudioHandle); free(m_pAudioBuffer); std::cout << "audio interface closed" << std::endl; } int Recorder::InitAudioContext() { std::cout << "Iniciando Grabador" << std::endl; int i; int err; snd_pcm_hw_params_t *hw_params; snd_pcm_format_t format = SND_PCM_FORMAT_S16_LE; if ((err = snd_pcm_open (&m_AudioHandle, m_DevName.c_str(), SND_PCM_STREAM_CAPTURE, 0)) < 0) { std::cerr << "cannot open audio device " << m_DevName << " Error: " << snd_strerror (err) << std::endl; return (1); } std::cout << "audio interface opened" << std::endl; if ((err = snd_pcm_hw_params_malloc (&hw_params)) < 0) { std::cerr << "cannot allocate hardware parameters structure: " << snd_strerror(err) << std::endl; return (1); } std::cout << "hw_params allocated" << std::endl; if ((err = snd_pcm_hw_params_any (m_AudioHandle, hw_params)) < 0) { std::cerr << "cannot initialize hardware parameter structure: " << snd_strerror(err) << std::endl; return (1); } std::cout << "hw_params initialized" << std::endl; if ((err = snd_pcm_hw_params_set_access (m_AudioHandle, hw_params, SND_PCM_ACCESS_RW_INTERLEAVED)) < 0) { std::cerr << "cannot set access type: " << snd_strerror (err) << std::endl; return (1); } std::cout << "hw_params access setted" << std::endl; if ((err = snd_pcm_hw_params_set_format (m_AudioHandle, hw_params, format)) < 0) { std::cerr << "cannot set sample format: " << snd_strerror (err) << std::endl; return (1); } std::cout << "hw_params format setted" << std::endl; if ((err = snd_pcm_hw_params_set_rate_near (m_AudioHandle, hw_params, (unsigned int *)&m_SampleRate, 0)) < 0) { std::cerr << "cannot set sample rate: " << snd_strerror (err) << std::endl; return (1); } std::cout << "hw_params rate setted" << std::endl; if ((err = snd_pcm_hw_params_set_channels (m_AudioHandle, hw_params, CHANNELS)) < 0) { std::cerr << "cannot set channel count: " << snd_strerror (err) << std::endl; return (1); } std::cout << "hw_params channels setted" << std::endl; if ((err = snd_pcm_hw_params (m_AudioHandle, hw_params)) < 0) { std::cerr << "cannot set parameters: " << snd_strerror (err) << std::endl; return (1); } std::cout << "hw_params setted" << std::endl; snd_pcm_hw_params_free (hw_params); std::cout << "hw_params freed" << std::endl; if ((err = snd_pcm_prepare (m_AudioHandle)) < 0) { std::cerr << "cannot prepare audio interface for use: " << snd_strerror (err) << std::endl; return (1); } std::cout << "audio interface prepared" << std::endl; std::cout << "formt width: " << snd_pcm_format_width(format) << std::endl; // Tamaño total en bytes del buffer de memoria reservado m_BufferSize = m_FrameBufferSize * snd_pcm_format_width(format) / 8 * CHANNELS; // Puntero al buffer de memoria reservado. m_pAudioBuffer = (int8_t *)malloc(m_BufferSize); return 0; }

1 0

[PATCH] ASoC: SOF: Remove libraries from topology lookups
by cujomalainey＠chromium.org 01 Aug '24

01 Aug '24

From: Curtis Malainey <cujomalainey(a)chromium.org> Default firmware shipped in open source are not licensed for 3P libraries, therefore topologies should not reference them. If a OS wants to use 3P (that they have licensed) then they should use the appropriate topology override mechanisms. Fixes: 8a7d5d85ed2161 ("ASoC: SOF: mediatek: mt8195: Add devicetree support to select topologies") Signed-off-by: Curtis Malainey <cujomalainey(a)chromium.org> Cc: Wojciech Macek <wmacek(a)google.com> --- sound/soc/sof/mediatek/mt8195/mt8195.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/sof/mediatek/mt8195/mt8195.c b/sound/soc/sof/mediatek/mt8195/mt8195.c index 24ae1d4959be..1c6e035fd313 100644 --- a/sound/soc/sof/mediatek/mt8195/mt8195.c +++ b/sound/soc/sof/mediatek/mt8195/mt8195.c @@ -573,7 +573,7 @@ static const struct snd_sof_dsp_ops sof_mt8195_ops = { static struct snd_sof_of_mach sof_mt8195_machs[] = { { .compatible = "google,tomato", - .sof_tplg_filename = "sof-mt8195-mt6359-rt1019-rt5682-dts.tplg" + .sof_tplg_filename = "sof-mt8195-mt6359-rt1019-rt5682.tplg" }, { .compatible = "mediatek,mt8195", .sof_tplg_filename = "sof-mt8195.tplg" -- 2.46.0.rc2.264.g509ed76dc8-goog

3 2