July 2024 - Alsa-devel - mailman.alsa-project.org

[PATCH] ALSA: firewire-lib: restore process context workqueue to prevent deadlock
by Edmund Raile 24 Jul '24

24 Jul '24

Commit b5b519965c4c ("ALSA: firewire-lib: operate for period elapse event in process context") removed the process context workqueue from amdtp_domain_stream_pcm_pointer() and update_pcm_pointers() to remove its overhead. With RME Fireface 800, this lead to a regression since Kernels 5.14.0, causing a deadlock with eventual system freeze under ALSA operation: ? tasklet_unlock_spin_wait </NMI> <TASK> ohci_flush_iso_completions firewire_ohci amdtp_domain_stream_pcm_pointer snd_firewire_lib snd_pcm_update_hw_ptr0 snd_pcm snd_pcm_status64 snd_pcm ? native_queued_spin_lock_slowpath </NMI> <IRQ> _raw_spin_lock_irqsave snd_pcm_period_elapsed snd_pcm process_rx_packets snd_firewire_lib irq_target_callback snd_firewire_lib handle_it_packet firewire_ohci context_tasklet firewire_ohci Restore the work queue to prevent deadlock between ALSA substream process context spin_lock of snd_pcm_stream_lock_irq() in snd_pcm_status64() and OHCI 1394 IT softIRQ context spin_lock of snd_pcm_stream_lock_irqsave() in snd_pcm_period_elapsed(). to reproduce the issue: direct ALSA playback to the device: mpv --audio-device=alsa/sysdefault:CARD=Fireface800 Spor-Ignition.flac Time to occurrence: 2s to 30m Likelihood increased by: - high CPU load stress --cpu $(nproc) - switching between applications via workspaces tested with i915 in Xfce PulsaAudio / PipeWire conceal the issue as they run PCM substream without period wakeup mode, issuing less hardIRQs. Closes: https://lore.kernel.org/regressions/kwryofzdmjvzkuw6j3clftsxmoolynljztxqwg7… Fixes: 7ba5ca32fe6e ("ALSA: firewire-lib: operate for period elapse event in process context") Signed-off-by: Edmund Raile <edmund.raile(a)proton.me> --- This is the follow-up patch to the 5.14.0 regression I reported: https://lore.kernel.org/regressions/kwryofzdmjvzkuw6j3clftsxmoolynljztxqwg7… ("[REGRESSION] ALSA: firewire-lib: snd_pcm_period_elapsed deadlock with Fireface 800") Takashi Sakamoto explained the issue in his response to the regression: A. In the process context * (lock A) Acquiring spin_lock by snd_pcm_stream_lock_irq() in snd_pcm_status64() * (lock B) Then attempt to enter tasklet B. In the softIRQ context * (lock B) Enter tasklet * (lock A) Attempt to acquire spin_lock by snd_pcm_stream_lock_irqsave() in snd_pcm_period_elapsed() This leads me to believe this isn't just an issue limited to the RME Fireface driver (snd_fireface), though I can not test the other devices. sound/firewire/amdtp-stream.c | 32 +++++++++++++++++++++----------- sound/firewire/amdtp-stream.h | 1 + 2 files changed, 22 insertions(+), 11 deletions(-) diff --git a/sound/firewire/amdtp-stream.c b/sound/firewire/amdtp-stream.c index d35d0a420ee0..77b99a2117f4 100644 --- a/sound/firewire/amdtp-stream.c +++ b/sound/firewire/amdtp-stream.c @@ -77,6 +77,8 @@ // overrun. Actual device can skip more, then this module stops the packet streaming. #define IR_JUMBO_PAYLOAD_MAX_SKIP_CYCLES 5 +static void pcm_period_work(struct work_struct *work); + /** * amdtp_stream_init - initialize an AMDTP stream structure * @s: the AMDTP stream to initialize @@ -105,6 +107,7 @@ int amdtp_stream_init(struct amdtp_stream *s, struct fw_unit *unit, s->flags = flags; s->context = ERR_PTR(-1); mutex_init(&s->mutex); + INIT_WORK(&s->period_work, pcm_period_work); s->packet_index = 0; init_waitqueue_head(&s->ready_wait); @@ -347,6 +350,7 @@ EXPORT_SYMBOL(amdtp_stream_get_max_payload); */ void amdtp_stream_pcm_prepare(struct amdtp_stream *s) { + cancel_work_sync(&s->period_work); s->pcm_buffer_pointer = 0; s->pcm_period_pointer = 0; } @@ -611,19 +615,21 @@ static void update_pcm_pointers(struct amdtp_stream *s, // The program in user process should periodically check the status of intermediate // buffer associated to PCM substream to process PCM frames in the buffer, instead // of receiving notification of period elapsed by poll wait. - if (!pcm->runtime->no_period_wakeup) { - if (in_softirq()) { - // In software IRQ context for 1394 OHCI. - snd_pcm_period_elapsed(pcm); - } else { - // In process context of ALSA PCM application under acquired lock of - // PCM substream. - snd_pcm_period_elapsed_under_stream_lock(pcm); - } - } + if (!pcm->runtime->no_period_wakeup) + queue_work(system_highpri_wq, &s->period_work); } } +static void pcm_period_work(struct work_struct *work) +{ + struct amdtp_stream *s = container_of(work, struct amdtp_stream, + period_work); + struct snd_pcm_substream *pcm = READ_ONCE(s->pcm); + + if (pcm) + snd_pcm_period_elapsed(pcm); +} + static int queue_packet(struct amdtp_stream *s, struct fw_iso_packet *params, bool sched_irq) { @@ -1854,7 +1860,10 @@ unsigned long amdtp_domain_stream_pcm_pointer(struct amdtp_domain *d, if (irq_target && amdtp_stream_running(irq_target)) { // In software IRQ context, the call causes dead-lock to disable the tasklet // synchronously. - if (!in_softirq()) + // workqueue serves to prevent deadlock between process context spinlock + // of snd_pcm_stream_lock_irq() in snd_pcm_status64() and softIRQ spinlock + // of snd_pcm_stream_lock_irqsave() in snd_pcm_period_elapsed() + if ((!in_softirq()) && (current_work() != &s->period_work)) fw_iso_context_flush_completions(irq_target->context); } @@ -1910,6 +1919,7 @@ static void amdtp_stream_stop(struct amdtp_stream *s) return; } + cancel_work_sync(&s->period_work); fw_iso_context_stop(s->context); fw_iso_context_destroy(s->context); s->context = ERR_PTR(-1); diff --git a/sound/firewire/amdtp-stream.h b/sound/firewire/amdtp-stream.h index a1ed2e80f91a..775db3fc4959 100644 --- a/sound/firewire/amdtp-stream.h +++ b/sound/firewire/amdtp-stream.h @@ -191,6 +191,7 @@ struct amdtp_stream { /* For a PCM substream processing. */ struct snd_pcm_substream *pcm; + struct work_struct period_work; snd_pcm_uframes_t pcm_buffer_pointer; unsigned int pcm_period_pointer; unsigned int pcm_frame_multiplier; -- 2.45.2

2 1

[bug report] ASoC: Intel: cht_bsw_rt5645: Set card.components string
by Dan Carpenter 23 Jul '24

23 Jul '24

Hello Hans de Goede, Commit f87b4402163b ("ASoC: Intel: cht_bsw_rt5645: Set card.components string") from Nov 26, 2023 (linux-next), leads to the following Smatch static checker warning: sound/soc/intel/boards/cht_bsw_rt5645.c:587 snd_cht_mc_probe() error: we previously assumed 'adev' could be null (see line 581) sound/soc/intel/boards/cht_bsw_rt5645.c 570 /* set correct codec name */ 571 for (i = 0; i < ARRAY_SIZE(cht_dailink); i++) 572 if (cht_dailink[i].codecs->name && 573 !strcmp(cht_dailink[i].codecs->name, 574 "i2c-10EC5645:00")) { 575 dai_index = i; 576 break; 577 } 578 579 /* fixup codec name based on HID */ 580 adev = acpi_dev_get_first_match_dev(mach->id, NULL, -1); 581 if (adev) { ^^^^ The old code assumes adev can be NULL 582 snprintf(cht_rt5645_codec_name, sizeof(cht_rt5645_codec_name), 583 "i2c-%s", acpi_dev_name(adev)); 584 cht_dailink[dai_index].codecs->name = cht_rt5645_codec_name; 585 } 586 /* acpi_get_first_physical_node() returns a borrowed ref, no need to deref */ --> 587 codec_dev = acpi_get_first_physical_node(adev); ^^^^ Unchecked dereference 588 acpi_dev_put(adev); 589 if (!codec_dev) 590 return -EPROBE_DEFER; 591 592 snd_soc_card_chtrt5645.components = rt5645_components(codec_dev); 593 snd_soc_card_chtrt5650.components = rt5645_components(codec_dev); 594 regards, dan carpenter

2 2

[PATCH for-6.10 0/2] ASoC: cs35l56: Set correct upper volume limit
by Richard Fitzgerald 23 Jul '24

23 Jul '24

Patch series to limit the upper range of the CS35L56 volume control to +12 dB. These commits were not marked 'Fixes' because they were thought to be only a cosmetic issue. The user could reduce the volume to a usable value. But for some complex audio topologies with SOF Audio DSP + CS42L43 + multiple CS35L56 it has turned out to be not obvious to the user what the problem actually is and what to do to fix it. As support for these topologies went into 6.10 we would like this series to be applied to 6.10. Richard Fitzgerald (2): ASoC: cs35l56: Use header defines for Speaker Volume control definition ASoC: cs35l56: Limit Speaker Volume to +12dB maximum include/sound/cs35l56.h | 2 +- sound/soc/codecs/cs35l56.c | 6 +++++- 2 files changed, 6 insertions(+), 2 deletions(-) -- 2.39.2

2 3

[PATCH 0/4] MSM8953/MSM8976 ASoC support
by Adam Skladowski 23 Jul '24

23 Jul '24

Introduce support for basic sound card setup on MSM8953/MSM8976 platforms, document new compatibles and introduce support for more dais. Most of code is sourced from msm8953-mainline fork over github with some changes implemented by me,some basic changes are mentioned in each patch. Adam Skladowski (1): ASoC: dt-bindings: qcom,sm8250: Add msm8953/msm8976-qdsp6-sndcard Vladimir Lypak (3): ASoC: qcom: apq8016_sbc.c: Add Quinary support ASoC: msm8916-wcd-analog: add cajon and cajon v2 support ASoC: qcom: apq8016_sbc: Add support for msm8953/msm8976 SoC .../bindings/sound/qcom,sm8250.yaml | 28 ++++++- sound/soc/codecs/msm8916-wcd-analog.c | 63 +++++++++++++- sound/soc/qcom/apq8016_sbc.c | 82 ++++++++++++++++++- 3 files changed, 164 insertions(+), 9 deletions(-) -- 2.45.2

4 8

[RFC 00/xx] ALSA: ALSA: add snd_stream_is_playback/capture()
by Kuninori Morimoto 23 Jul '24

23 Jul '24

Hi Iwai-san, Mark Current many drivers are using below code to know its direction. if (direction == SNDRV_PCM_STREAM_PLAYBACK) I think it should be handled by function. But is it acceptable idea ? Because it will be too many patch-set, I want to know it was acceptable idea or not before posting patch-bomb. I will post main patch, and sample driver patches. Thank you for your help !! Best regards --- Kuninori Morimoto

5 17

[PATCH] ASoc: TAS2781: Fix tasdev_load_calibrated_data()
by Dan Carpenter 22 Jul '24

22 Jul '24

This function has a reversed if statement so it's either a no-op or it leads to a NULL dereference. Fixes: b195acf5266d ("ASoC: tas2781: Fix wrong loading calibrated data sequence") Signed-off-by: Dan Carpenter <dan.carpenter(a)linaro.org> --- sound/soc/codecs/tas2781-fmwlib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/tas2781-fmwlib.c b/sound/soc/codecs/tas2781-fmwlib.c index 63626b982d04..8f9a3ae7153e 100644 --- a/sound/soc/codecs/tas2781-fmwlib.c +++ b/sound/soc/codecs/tas2781-fmwlib.c @@ -2162,7 +2162,7 @@ static void tasdev_load_calibrated_data(struct tasdevice_priv *priv, int i) return; cal = cal_fmw->calibrations; - if (cal) + if (!cal) return; load_calib_data(priv, &cal->dev_data); -- 2.43.0

2 1

[PATCH] ASoC: Intel: use soc_intel_is_byt_cr() only when IOSF_MBI is reachable
by Pierre-Louis Bossart 22 Jul '24

22 Jul '24

the Intel kbuild bot reports a link failure when IOSF_MBI is built-in but the Merrifield driver is configured as a module. The soc-intel-quirks.h is included for Merrifield platforms, but IOSF_MBI is not selected for that platform. ld.lld: error: undefined symbol: iosf_mbi_read >>> referenced by atom.c >>> sound/soc/sof/intel/atom.o:(atom_machine_select) in archive vmlinux.a This patch forces the use of the fallback static inline when IOSF_MBI is not reachable. Fixes: 536cfd2f375d ("ASoC: Intel: use common helpers to detect CPUs") Reported-by: kernel test robot <lkp(a)intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202407160704.zpdhJ8da-lkp@intel.com/ Suggested-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> --- sound/soc/intel/common/soc-intel-quirks.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/intel/common/soc-intel-quirks.h b/sound/soc/intel/common/soc-intel-quirks.h index de4e550c5b34..42bd51456b94 100644 --- a/sound/soc/intel/common/soc-intel-quirks.h +++ b/sound/soc/intel/common/soc-intel-quirks.h @@ -11,7 +11,7 @@ #include <linux/platform_data/x86/soc.h> -#if IS_ENABLED(CONFIG_X86) +#if IS_REACHABLE(CONFIG_IOSF_MBI) #include <linux/dmi.h> #include <asm/iosf_mbi.h> -- 2.43.0

2 1

[PATCH alsa-utils 00/10] Cleanup seq/* stuff and extend aseqsend
by Takashi Iwai 22 Jul '24

22 Jul '24

Hi, this is a series of cleanup / fix patches for alsa-utils/seq/* stuff, including the extension of aseqsend to support UMP packet bytes. Takashi === Takashi Iwai (10): configure: Requires the latest ALSA-lib release 1.2.12 aplaymidi: Drop ifdef for UMP support aplaymidi: Allow to pass 0 to -u option, too aconnect: Drop superfluous ifdefs aseqdump: Drop ifdef for UMP support aseqdump: Check the -u option value properly configure: Drop unused conditionals aseqdump: Show SysEx prefix to UMP SysEx data dump aseqsend: Support UMP mode aseqsend: Support long options configure.ac | 13 +------- seq/aconnect/aconnect.c | 31 ------------------ seq/aplaymidi/aplaymidi.c | 32 +++--------------- seq/aseqdump/aseqdump.c | 25 +++----------- seq/aseqsend/aseqsend.1 | 69 +++++++++++++++++++++------------------ seq/aseqsend/aseqsend.c | 54 +++++++++++++++++++++++++++++- 6 files changed, 100 insertions(+), 124 deletions(-) -- 2.43.0

1 10

[PATCH v3] ALSA: usb-audio: Add a quirk for Sonix HD USB Camera
by wangdicheng 22 Jul '24

22 Jul '24

From: wangdicheng <wangdicheng(a)kylinos.cn> Sonix HD USB Camera does not support reading the sample rate which leads to many lines of "cannot get freq at ep 0x84". This patch adds the USB ID to quirks.c and avoids those error messages. (snip) [1.789698] usb 3-3: new high-speed USB device number 2 using xhci_hcd [1.984121] usb 3-3: New USB device found, idVendor=0c45, idProduct=6340, bcdDevice= 0.00 [1.984124] usb 3-3: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [1.984127] usb 3-3: Product: USB 2.0 Camera [1.984128] usb 3-3: Manufacturer: Sonix Technology Co., Ltd. [5.440957] usb 3-3: 3:1: cannot get freq at ep 0x84 [12.130679] usb 3-3: 3:1: cannot get freq at ep 0x84 [12.175065] usb 3-3: 3:1: cannot get freq at ep 0x84 Signed-off-by: wangdicheng <wangdicheng(a)kylinos.cn> --- v2 -> v3: Update the insertion order of ID 0c45 v1 -> v2: Arrange the ID in order --- sound/usb/quirks.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 58156fbca02c..b42654033c33 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -2125,6 +2125,8 @@ static const struct usb_audio_quirk_flags_table quirk_flags_table[] = { QUIRK_FLAG_CTL_MSG_DELAY_1M), DEVICE_FLG(0x0b0e, 0x0349, /* Jabra 550a */ QUIRK_FLAG_CTL_MSG_DELAY_1M), + DEVICE_FLG(0x0c45, 0x6340, /* Sonix HD USB Camera */ + QUIRK_FLAG_GET_SAMPLE_RATE), DEVICE_FLG(0x0ecb, 0x205c, /* JBL Quantum610 Wireless */ QUIRK_FLAG_FIXED_RATE), DEVICE_FLG(0x0ecb, 0x2069, /* JBL Quantum810 Wireless */ -- 2.25.1

2 1

[PATCH] ASoC: sti: add missing probe entry for player and reader
by Jerome Audu 22 Jul '24

22 Jul '24

Restores the audio functionality that was broken since Linux version 6.6.y by adding the missing probe functions for the player and reader components. Fixes: 9f625f5e6cf9 ("ASoC: sti: merge DAI call back functions into ops") Signed-off-by: Jerome Audu <jau(a)free.fr> --- Specifically, the probe function in `sound/soc/sti/sti_uniperif.c:415` is being replaced by another probe function located at `sound/soc/sti/sti_uniperif.c:453`, which should instead be derived from the player and reader components. My patch correctly reinserts the missing probe entries, restoring the intended functionality. The patch modifies the following files: - `sound/soc/sti/sti_uniperif.c`: Changes the visibility of `sti_uniperiph_dai_probe` to non-static. - `sound/soc/sti/uniperif.h`: Adds the declaration of `sti_uniperiph_dai_probe`. - `sound/soc/sti/uniperif_player.c`: Adds `probe` function to `uni_player_dai_ops`. - `sound/soc/sti/uniperif_reader.c`: Adds `probe` function to `uni_reader_dai_ops`. This ensures the correct `probe` functions are utilized, thus fixing the audio regression. --- sound/soc/sti/sti_uniperif.c | 2 +- sound/soc/sti/uniperif.h | 1 + sound/soc/sti/uniperif_player.c | 1 + sound/soc/sti/uniperif_reader.c | 1 + 4 files changed, 4 insertions(+), 1 deletion(-) diff --git a/sound/soc/sti/sti_uniperif.c b/sound/soc/sti/sti_uniperif.c index ba824f14a39c..a7956e5a4ee5 100644 --- a/sound/soc/sti/sti_uniperif.c +++ b/sound/soc/sti/sti_uniperif.c @@ -352,7 +352,7 @@ static int sti_uniperiph_resume(struct snd_soc_component *component) return ret; } -static int sti_uniperiph_dai_probe(struct snd_soc_dai *dai) +int sti_uniperiph_dai_probe(struct snd_soc_dai *dai) { struct sti_uniperiph_data *priv = snd_soc_dai_get_drvdata(dai); struct sti_uniperiph_dai *dai_data = &priv->dai_data; diff --git a/sound/soc/sti/uniperif.h b/sound/soc/sti/uniperif.h index 2a5de328501c..74e51f0ff85c 100644 --- a/sound/soc/sti/uniperif.h +++ b/sound/soc/sti/uniperif.h @@ -1380,6 +1380,7 @@ int uni_reader_init(struct platform_device *pdev, struct uniperif *reader); /* common */ +int sti_uniperiph_dai_probe(struct snd_soc_dai *dai); int sti_uniperiph_dai_set_fmt(struct snd_soc_dai *dai, unsigned int fmt); diff --git a/sound/soc/sti/uniperif_player.c b/sound/soc/sti/uniperif_player.c index dd9013c47664..6d1ce030963c 100644 --- a/sound/soc/sti/uniperif_player.c +++ b/sound/soc/sti/uniperif_player.c @@ -1038,6 +1038,7 @@ static const struct snd_soc_dai_ops uni_player_dai_ops = { .startup = uni_player_startup, .shutdown = uni_player_shutdown, .prepare = uni_player_prepare, + .probe = sti_uniperiph_dai_probe, .trigger = uni_player_trigger, .hw_params = sti_uniperiph_dai_hw_params, .set_fmt = sti_uniperiph_dai_set_fmt, diff --git a/sound/soc/sti/uniperif_reader.c b/sound/soc/sti/uniperif_reader.c index 065c5f0d1f5f..05ea2b794eb9 100644 --- a/sound/soc/sti/uniperif_reader.c +++ b/sound/soc/sti/uniperif_reader.c @@ -401,6 +401,7 @@ static const struct snd_soc_dai_ops uni_reader_dai_ops = { .startup = uni_reader_startup, .shutdown = uni_reader_shutdown, .prepare = uni_reader_prepare, + .probe = sti_uniperiph_dai_probe, .trigger = uni_reader_trigger, .hw_params = sti_uniperiph_dai_hw_params, .set_fmt = sti_uniperiph_dai_set_fmt, --- base-commit: 0c3836482481200ead7b416ca80c68a29cfdaabd change-id: 20240721-sti-audio-fix-1374fffb24e7 Best regards, -- Jerome Audu <jau(a)free.fr>

2 1

[PATCH v2] ALSA: usb-audio: Add a quirk for Sonix HD USB Camera
by wangdicheng 22 Jul '24

22 Jul '24

From: wangdicheng <wangdicheng(a)kylinos.cn> Sonix HD USB Camera does not support reading the sample rate which leads to many lines of "cannot get freq at ep 0x84". This patch adds the USB ID to quirks.c and avoids those error messages. (snip) [1.789698] usb 3-3: new high-speed USB device number 2 using xhci_hcd [1.984121] usb 3-3: New USB device found, idVendor=0c45, idProduct=6340, bcdDevice= 0.00 [1.984124] usb 3-3: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [1.984127] usb 3-3: Product: USB 2.0 Camera [1.984128] usb 3-3: Manufacturer: Sonix Technology Co., Ltd. [5.440957] usb 3-3: 3:1: cannot get freq at ep 0x84 [12.130679] usb 3-3: 3:1: cannot get freq at ep 0x84 [12.175065] usb 3-3: 3:1: cannot get freq at ep 0x84 Signed-off-by: wangdicheng <wangdicheng(a)kylinos.cn> --- v1 -> v2: Arrange the ID in order --- sound/usb/quirks.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 58156fbca02c..54b2d2f314ac 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -2225,6 +2225,8 @@ static const struct usb_audio_quirk_flags_table quirk_flags_table[] = { QUIRK_FLAG_ALIGN_TRANSFER), DEVICE_FLG(0x534d, 0x2109, /* MacroSilicon MS2109 */ QUIRK_FLAG_ALIGN_TRANSFER), + DEVICE_FLG(0x0c45, 0x6340, /* Sonix HD USB Camera */ + QUIRK_FLAG_GET_SAMPLE_RATE), /* Vendor matches */ VENDOR_FLG(0x045e, /* MS Lifecam */ -- 2.25.1

2 1

aplay: Print '=== PAUSE ===' only if it is supported
by GitHub pull_request - opened 22 Jul '24

22 Jul '24

alsa-project/alsa-utils pull request #271 was opened from ujfalusi: Instead of printing the '=== PAUSE ===' unconditionally before calling do_pause(), move it to the function and only print it if the stream can be paused. If the stream cannot be paused that the '=== PAUSE ===' will be replaced by `PAUSE command ignored (no hw support)` immediately, which is not observable by users but automation scripts will catch the '=== PAUSE ===' and might think that the stream is indeed got paused. Move the print into do_pause() function after the snd_pcm_pause() have returned without error to make sure it is only printed if the stream is paused and we are waiting for the pause release from user to proceed. Request URL : https://github.com/alsa-project/alsa-utils/pull/271 Patch URL : https://github.com/alsa-project/alsa-utils/pull/271.patch Repository URL: https://github.com/alsa-project/alsa-utils

1 0

Fwd: [PATCH] ALSA: hda/realtek: Implement sound init sequence for Samsung Galaxy Book3 Pro 360
by Nick Weihs 22 Jul '24

22 Jul '24

Samsung Galaxy Book3 Pro 360 sends a large amount of data to the codec through hda processing coefficients. This data was captured using a modified version of QEMU, but the actual content of the data remains opaque to me. Elliding any part of the data seems to cause sound to not work. Signed-off-by: Nick Weihs <nick.weihs(a)gmail.com> --- sound/pci/hda/patch_realtek.c | 305 ++++++++++++++++++++++++++++++++++ 1 file changed, 305 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index aa76d1c88589..cbe6d9689fc3 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -4796,6 +4796,304 @@ static void alc298_fixup_samsung_amp(struct hda_codec *codec, } } +static inline void alc298_samsung_write_coef_pack2(struct hda_codec *codec, + const unsigned short coefs[4]) +{ + int i; + + for (i = 0; i < 100; i++) { + if ((alc_read_coef_idx(codec, 0x26) & 0x0010) == 0) + break; + } + + alc_write_coef_idx(codec, 0x23, coefs[0]); + alc_write_coef_idx(codec, 0x24, coefs[1]); + alc_write_coef_idx(codec, 0x25, coefs[2]); + alc_write_coef_idx(codec, 0x26, coefs[3]); +} + +static inline void alc298_samsung_write_coef_pack_seq( + struct hda_codec *codec, + unsigned char target, + const unsigned short (*sequence)[4], + int count) +{ + alc_write_coef_idx(codec, 0x22, target); + for (int i = 0; i < count; i++) + alc298_samsung_write_coef_pack2(codec, sequence[i]); +} + +struct alc298_samsung_coeff_fixup_desc { + unsigned char coeff_idx; + unsigned short coeff_value; +}; + +static void alc298_fixup_samsung_amp2(struct hda_codec *codec, + const struct hda_fixup *fix, int action) +{ + int i; + static const struct alc298_samsung_coeff_fixup_desc fixups1[] = { + { 0x99, 0x8000 }, { 0x82, 0x4408 }, { 0x32, 0x3f00 }, { 0x0e, 0x6f80 }, + { 0x10, 0x0e21 }, { 0x55, 0x8000 }, { 0x08, 0x2fcf }, { 0x08, 0x2fcf }, + { 0x2d, 0xc020 }, { 0x19, 0x0017 }, { 0x50, 0x1000 }, { 0x0e, 0x6f80 }, + { 0x08, 0x2fcf }, { 0x80, 0x0011 }, { 0x2b, 0x0c10 }, { 0x2d, 0xc020 }, + { 0x03, 0x0042 }, { 0x0f, 0x0062 }, { 0x08, 0x2fcf }, + }; + + static const unsigned short amp_0x38[][4] = { + { 0x2000, 0x0000, 0x0001, 0xB011 }, { 0x23FF, 0x0000, 0x0000, 0xB011 }, + { 0x203A, 0x0000, 0x0080, 0xB011 }, { 0x23E1, 0x0000, 0x0000, 0xB011 }, + { 0x2012, 0x0000, 0x006F, 0xB011 }, { 0x2014, 0x0000, 0x0000, 0xB011 }, + { 0x201B, 0x0000, 0x0001, 0xB011 }, { 0x201D, 0x0000, 0x0001, 0xB011 }, + { 0x201F, 0x0000, 0x00FE, 0xB011 }, { 0x2021, 0x0000, 0x0000, 0xB011 }, + { 0x2022, 0x0000, 0x0010, 0xB011 }, { 0x203D, 0x0000, 0x0005, 0xB011 }, + { 0x203F, 0x0000, 0x0003, 0xB011 }, { 0x2050, 0x0000, 0x002C, 0xB011 }, + { 0x2076, 0x0000, 0x000E, 0xB011 }, { 0x207C, 0x0000, 0x004A, 0xB011 }, + { 0x2081, 0x0000, 0x0003, 0xB011 }, { 0x2399, 0x0000, 0x0003, 0xB011 }, + { 0x23A4, 0x0000, 0x00B5, 0xB011 }, { 0x23A5, 0x0000, 0x0001, 0xB011 }, + { 0x23BA, 0x0000, 0x0094, 0xB011 }, { 0x2100, 0x00D0, 0x950E, 0xB017 }, + { 0x2104, 0x0061, 0xD4E2, 0xB017 }, { 0x2108, 0x00D0, 0x950E, 0xB017 }, + { 0x210C, 0x0075, 0xF4E2, 0xB017 }, { 0x2110, 0x00B4, 0x4B0D, 0xB017 }, + { 0x2114, 0x000A, 0x1000, 0xB017 }, { 0x2118, 0x0015, 0x2000, 0xB017 }, + { 0x211C, 0x000A, 0x1000, 0xB017 }, { 0x2120, 0x0075, 0xF4E2, 0xB017 }, + { 0x2124, 0x00B4, 0x4B0D, 0xB017 }, { 0x2128, 0x0000, 0x0010, 0xB017 }, + { 0x212C, 0x0000, 0x0000, 0xB017 }, { 0x2130, 0x0000, 0x0000, 0xB017 }, + { 0x2134, 0x0000, 0x0000, 0xB017 }, { 0x2138, 0x0000, 0x0000, 0xB017 }, + { 0x213C, 0x0000, 0x0010, 0xB017 }, { 0x2140, 0x0000, 0x0000, 0xB017 }, + { 0x2144, 0x0000, 0x0000, 0xB017 }, { 0x2148, 0x0000, 0x0000, 0xB017 }, + { 0x214C, 0x0000, 0x0000, 0xB017 }, { 0x2150, 0x0000, 0x0010, 0xB017 }, + { 0x2154, 0x0000, 0x0000, 0xB017 }, { 0x2158, 0x0000, 0x0000, 0xB017 }, + { 0x215C, 0x0000, 0x0000, 0xB017 }, { 0x2160, 0x0000, 0x0000, 0xB017 }, + { 0x2164, 0x0000, 0x0010, 0xB017 }, { 0x2168, 0x0000, 0x0000, 0xB017 }, + { 0x216C, 0x0000, 0x0000, 0xB017 }, { 0x2170, 0x0000, 0x0000, 0xB017 }, + { 0x2174, 0x0000, 0x0000, 0xB017 }, { 0x2178, 0x0000, 0x0010, 0xB017 }, + { 0x217C, 0x0000, 0x0000, 0xB017 }, { 0x2180, 0x0000, 0x0000, 0xB017 }, + { 0x2184, 0x0000, 0x0000, 0xB017 }, { 0x2188, 0x0000, 0x0000, 0xB017 }, + { 0x218C, 0x0064, 0x5800, 0xB017 }, { 0x2190, 0x00C8, 0xB000, 0xB017 }, + { 0x2194, 0x0064, 0x5800, 0xB017 }, { 0x2198, 0x003D, 0x5BE7, 0xB017 }, + { 0x219C, 0x0054, 0x060A, 0xB017 }, { 0x21A0, 0x00C8, 0xA310, 0xB017 }, + { 0x21A4, 0x0029, 0x4DE5, 0xB017 }, { 0x21A8, 0x0032, 0x420C, 0xB017 }, + { 0x21AC, 0x0029, 0x4DE5, 0xB017 }, { 0x21B0, 0x00FA, 0xE50C, 0xB017 }, + { 0x21B4, 0x0000, 0x0010, 0xB017 }, { 0x21B8, 0x0000, 0x0000, 0xB017 }, + { 0x21BC, 0x0000, 0x0000, 0xB017 }, { 0x21C0, 0x0000, 0x0000, 0xB017 }, + { 0x21C4, 0x0000, 0x0000, 0xB017 }, { 0x21C8, 0x0056, 0xC50F, 0xB017 }, + { 0x21CC, 0x007B, 0xD7E1, 0xB017 }, { 0x21D0, 0x0077, 0xA70E, 0xB017 }, + { 0x21D4, 0x00E0, 0xBDE1, 0xB017 }, { 0x21D8, 0x0032, 0x530E, 0xB017 }, + { 0x2204, 0x00FB, 0x7E0F, 0xB017 }, { 0x2208, 0x000B, 0x02E1, 0xB017 }, + { 0x220C, 0x00FB, 0x7E0F, 0xB017 }, { 0x2210, 0x00D5, 0x17E1, 0xB017 }, + { 0x2214, 0x00C0, 0x130F, 0xB017 }, { 0x2218, 0x00E5, 0x0A00, 0xB017 }, + { 0x221C, 0x00CB, 0x1500, 0xB017 }, { 0x2220, 0x00E5, 0x0A00, 0xB017 }, + { 0x2224, 0x00D5, 0x17E1, 0xB017 }, { 0x2228, 0x00C0, 0x130F, 0xB017 }, + { 0x222C, 0x00F5, 0xDB0E, 0xB017 }, { 0x2230, 0x0017, 0x48E2, 0xB017 }, + { 0x2234, 0x00F5, 0xDB0E, 0xB017 }, { 0x2238, 0x00EF, 0x5CE2, 0xB017 }, + { 0x223C, 0x00C1, 0xCC0D, 0xB017 }, { 0x2240, 0x00F5, 0xDB0E, 0xB017 }, + { 0x2244, 0x0017, 0x48E2, 0xB017 }, { 0x2248, 0x00F5, 0xDB0E, 0xB017 }, + { 0x224C, 0x00EF, 0x5CE2, 0xB017 }, { 0x2250, 0x00C1, 0xCC0D, 0xB017 }, + { 0x2254, 0x00F5, 0xDB0E, 0xB017 }, { 0x2258, 0x0017, 0x48E2, 0xB017 }, + { 0x225C, 0x00F5, 0xDB0E, 0xB017 }, { 0x2260, 0x00EF, 0x5CE2, 0xB017 }, + { 0x2264, 0x00C1, 0xCC0D, 0xB017 }, { 0x2268, 0x00F5, 0xDB0E, 0xB017 }, + { 0x226C, 0x0017, 0x48E2, 0xB017 }, { 0x2270, 0x00F5, 0xDB0E, 0xB017 }, + { 0x2274, 0x00EF, 0x5CE2, 0xB017 }, { 0x2278, 0x00C1, 0xCC0D, 0xB017 }, + { 0x227C, 0x00F5, 0xDB0E, 0xB017 }, { 0x2280, 0x0017, 0x48E2, 0xB017 }, + { 0x2284, 0x00F5, 0xDB0E, 0xB017 }, { 0x2288, 0x00EF, 0x5CE2, 0xB017 }, + { 0x228C, 0x00C1, 0xCC0D, 0xB017 }, { 0x22CC, 0x00E8, 0x8D00, 0xB017 }, + { 0x22D0, 0x0000, 0x0000, 0xB017 }, { 0x22D4, 0x0018, 0x72FF, 0xB017 }, + { 0x22D8, 0x00CE, 0x25E1, 0xB017 }, { 0x22DC, 0x002F, 0xE40E, 0xB017 }, + { 0x238E, 0x0000, 0x0099, 0xB011 }, { 0x238F, 0x0000, 0x0011, 0xB011 }, + { 0x2390, 0x0000, 0x0056, 0xB011 }, { 0x2391, 0x0000, 0x0004, 0xB011 }, + { 0x2392, 0x0000, 0x00BB, 0xB011 }, { 0x2393, 0x0000, 0x006D, 0xB011 }, + { 0x2394, 0x0000, 0x0010, 0xB011 }, { 0x2395, 0x0000, 0x0064, 0xB011 }, + { 0x2396, 0x0000, 0x00B6, 0xB011 }, { 0x2397, 0x0000, 0x0028, 0xB011 }, + { 0x2398, 0x0000, 0x000B, 0xB011 }, { 0x239A, 0x0000, 0x0099, 0xB011 }, + { 0x239B, 0x0000, 0x000D, 0xB011 }, { 0x23A6, 0x0000, 0x0064, 0xB011 }, + { 0x23A7, 0x0000, 0x0078, 0xB011 }, { 0x23B9, 0x0000, 0x0000, 0xB011 }, + { 0x23E0, 0x0000, 0x0021, 0xB011 }, { 0x23E1, 0x0000, 0x0001, 0xB011 }, + }; + + static const unsigned short amp_0x39[][4] = { + { 0x2000, 0x0000, 0x0001, 0xB011 }, { 0x23FF, 0x0000, 0x0000, 0xB011 }, + { 0x203A, 0x0000, 0x0080, 0xB011 }, { 0x23E1, 0x0000, 0x0000, 0xB011 }, + { 0x2012, 0x0000, 0x006F, 0xB011 }, { 0x2014, 0x0000, 0x0000, 0xB011 }, + { 0x201B, 0x0000, 0x0002, 0xB011 }, { 0x201D, 0x0000, 0x0002, 0xB011 }, + { 0x201F, 0x0000, 0x00FD, 0xB011 }, { 0x2021, 0x0000, 0x0001, 0xB011 }, + { 0x2022, 0x0000, 0x0010, 0xB011 }, { 0x203D, 0x0000, 0x0005, 0xB011 }, + { 0x203F, 0x0000, 0x0003, 0xB011 }, { 0x2050, 0x0000, 0x002C, 0xB011 }, + { 0x2076, 0x0000, 0x000E, 0xB011 }, { 0x207C, 0x0000, 0x004A, 0xB011 }, + { 0x2081, 0x0000, 0x0003, 0xB011 }, { 0x2399, 0x0000, 0x0003, 0xB011 }, + { 0x23A4, 0x0000, 0x00B5, 0xB011 }, { 0x23A5, 0x0000, 0x0001, 0xB011 }, + { 0x23BA, 0x0000, 0x0094, 0xB011 }, { 0x2100, 0x00D0, 0x950E, 0xB017 }, + { 0x2104, 0x0061, 0xD4E2, 0xB017 }, { 0x2108, 0x00D0, 0x950E, 0xB017 }, + { 0x210C, 0x0075, 0xF4E2, 0xB017 }, { 0x2110, 0x00B4, 0x4B0D, 0xB017 }, + { 0x2114, 0x000A, 0x1000, 0xB017 }, { 0x2118, 0x0015, 0x2000, 0xB017 }, + { 0x211C, 0x000A, 0x1000, 0xB017 }, { 0x2120, 0x0075, 0xF4E2, 0xB017 }, + { 0x2124, 0x00B4, 0x4B0D, 0xB017 }, { 0x2128, 0x0000, 0x0010, 0xB017 }, + { 0x212C, 0x0000, 0x0000, 0xB017 }, { 0x2130, 0x0000, 0x0000, 0xB017 }, + { 0x2134, 0x0000, 0x0000, 0xB017 }, { 0x2138, 0x0000, 0x0000, 0xB017 }, + { 0x213C, 0x0000, 0x0010, 0xB017 }, { 0x2140, 0x0000, 0x0000, 0xB017 }, + { 0x2144, 0x0000, 0x0000, 0xB017 }, { 0x2148, 0x0000, 0x0000, 0xB017 }, + { 0x214C, 0x0000, 0x0000, 0xB017 }, { 0x2150, 0x0000, 0x0010, 0xB017 }, + { 0x2154, 0x0000, 0x0000, 0xB017 }, { 0x2158, 0x0000, 0x0000, 0xB017 }, + { 0x215C, 0x0000, 0x0000, 0xB017 }, { 0x2160, 0x0000, 0x0000, 0xB017 }, + { 0x2164, 0x0000, 0x0010, 0xB017 }, { 0x2168, 0x0000, 0x0000, 0xB017 }, + { 0x216C, 0x0000, 0x0000, 0xB017 }, { 0x2170, 0x0000, 0x0000, 0xB017 }, + { 0x2174, 0x0000, 0x0000, 0xB017 }, { 0x2178, 0x0000, 0x0010, 0xB017 }, + { 0x217C, 0x0000, 0x0000, 0xB017 }, { 0x2180, 0x0000, 0x0000, 0xB017 }, + { 0x2184, 0x0000, 0x0000, 0xB017 }, { 0x2188, 0x0000, 0x0000, 0xB017 }, + { 0x218C, 0x0064, 0x5800, 0xB017 }, { 0x2190, 0x00C8, 0xB000, 0xB017 }, + { 0x2194, 0x0064, 0x5800, 0xB017 }, { 0x2198, 0x003D, 0x5BE7, 0xB017 }, + { 0x219C, 0x0054, 0x060A, 0xB017 }, { 0x21A0, 0x00C8, 0xA310, 0xB017 }, + { 0x21A4, 0x0029, 0x4DE5, 0xB017 }, { 0x21A8, 0x0032, 0x420C, 0xB017 }, + { 0x21AC, 0x0029, 0x4DE5, 0xB017 }, { 0x21B0, 0x00FA, 0xE50C, 0xB017 }, + { 0x21B4, 0x0000, 0x0010, 0xB017 }, { 0x21B8, 0x0000, 0x0000, 0xB017 }, + { 0x21BC, 0x0000, 0x0000, 0xB017 }, { 0x21C0, 0x0000, 0x0000, 0xB017 }, + { 0x21C4, 0x0000, 0x0000, 0xB017 }, { 0x21C8, 0x0056, 0xC50F, 0xB017 }, + { 0x21CC, 0x007B, 0xD7E1, 0xB017 }, { 0x21D0, 0x0077, 0xA70E, 0xB017 }, + { 0x21D4, 0x00E0, 0xBDE1, 0xB017 }, { 0x21D8, 0x0032, 0x530E, 0xB017 }, + { 0x2204, 0x00FB, 0x7E0F, 0xB017 }, { 0x2208, 0x000B, 0x02E1, 0xB017 }, + { 0x220C, 0x00FB, 0x7E0F, 0xB017 }, { 0x2210, 0x00D5, 0x17E1, 0xB017 }, + { 0x2214, 0x00C0, 0x130F, 0xB017 }, { 0x2218, 0x00E5, 0x0A00, 0xB017 }, + { 0x221C, 0x00CB, 0x1500, 0xB017 }, { 0x2220, 0x00E5, 0x0A00, 0xB017 }, + { 0x2224, 0x00D5, 0x17E1, 0xB017 }, { 0x2228, 0x00C0, 0x130F, 0xB017 }, + { 0x222C, 0x00F5, 0xDB0E, 0xB017 }, { 0x2230, 0x0017, 0x48E2, 0xB017 }, + { 0x2234, 0x00F5, 0xDB0E, 0xB017 }, { 0x2238, 0x00EF, 0x5CE2, 0xB017 }, + { 0x223C, 0x00C1, 0xCC0D, 0xB017 }, { 0x2240, 0x00F5, 0xDB0E, 0xB017 }, + { 0x2244, 0x0017, 0x48E2, 0xB017 }, { 0x2248, 0x00F5, 0xDB0E, 0xB017 }, + { 0x224C, 0x00EF, 0x5CE2, 0xB017 }, { 0x2250, 0x00C1, 0xCC0D, 0xB017 }, + { 0x2254, 0x00F5, 0xDB0E, 0xB017 }, { 0x2258, 0x0017, 0x48E2, 0xB017 }, + { 0x225C, 0x00F5, 0xDB0E, 0xB017 }, { 0x2260, 0x00EF, 0x5CE2, 0xB017 }, + { 0x2264, 0x00C1, 0xCC0D, 0xB017 }, { 0x2268, 0x00F5, 0xDB0E, 0xB017 }, + { 0x226C, 0x0017, 0x48E2, 0xB017 }, { 0x2270, 0x00F5, 0xDB0E, 0xB017 }, + { 0x2274, 0x00EF, 0x5CE2, 0xB017 }, { 0x2278, 0x00C1, 0xCC0D, 0xB017 }, + { 0x227C, 0x00F5, 0xDB0E, 0xB017 }, { 0x2280, 0x0017, 0x48E2, 0xB017 }, + { 0x2284, 0x00F5, 0xDB0E, 0xB017 }, { 0x2288, 0x00EF, 0x5CE2, 0xB017 }, + { 0x228C, 0x00C1, 0xCC0D, 0xB017 }, { 0x22CC, 0x00E8, 0x8D00, 0xB017 }, + { 0x22D0, 0x0000, 0x0000, 0xB017 }, { 0x22D4, 0x0018, 0x72FF, 0xB017 }, + { 0x22D8, 0x00CE, 0x25E1, 0xB017 }, { 0x22DC, 0x002F, 0xE40E, 0xB017 }, + { 0x238E, 0x0000, 0x0099, 0xB011 }, { 0x238F, 0x0000, 0x0011, 0xB011 }, + { 0x2390, 0x0000, 0x0056, 0xB011 }, { 0x2391, 0x0000, 0x0004, 0xB011 }, + { 0x2392, 0x0000, 0x00BB, 0xB011 }, { 0x2393, 0x0000, 0x006D, 0xB011 }, + { 0x2394, 0x0000, 0x0010, 0xB011 }, { 0x2395, 0x0000, 0x0064, 0xB011 }, + { 0x2396, 0x0000, 0x00B6, 0xB011 }, { 0x2397, 0x0000, 0x0028, 0xB011 }, + { 0x2398, 0x0000, 0x000B, 0xB011 }, { 0x239A, 0x0000, 0x0099, 0xB011 }, + { 0x239B, 0x0000, 0x000D, 0xB011 }, { 0x23A6, 0x0000, 0x0064, 0xB011 }, + { 0x23A7, 0x0000, 0x0078, 0xB011 }, { 0x23B9, 0x0000, 0x0000, 0xB011 }, + { 0x23E0, 0x0000, 0x0021, 0xB011 }, { 0x23E1, 0x0000, 0x0001, 0xB011 }, + }; + + static const unsigned short amp_0x3c[][4] = { + { 0x2000, 0x0000, 0x0001, 0xB011 }, { 0x23FF, 0x0000, 0x0000, 0xB011 }, + { 0x203A, 0x0000, 0x0080, 0xB011 }, { 0x23E1, 0x0000, 0x0000, 0xB011 }, + { 0x2012, 0x0000, 0x006F, 0xB011 }, { 0x2014, 0x0000, 0x0000, 0xB011 }, + { 0x201B, 0x0000, 0x0001, 0xB011 }, { 0x201D, 0x0000, 0x0001, 0xB011 }, + { 0x201F, 0x0000, 0x00FE, 0xB011 }, { 0x2021, 0x0000, 0x0000, 0xB011 }, + { 0x2022, 0x0000, 0x0010, 0xB011 }, { 0x203D, 0x0000, 0x0005, 0xB011 }, + { 0x203F, 0x0000, 0x0003, 0xB011 }, { 0x2050, 0x0000, 0x002C, 0xB011 }, + { 0x2076, 0x0000, 0x000E, 0xB011 }, { 0x207C, 0x0000, 0x004A, 0xB011 }, + { 0x2081, 0x0000, 0x0003, 0xB011 }, { 0x23BA, 0x0000, 0x008D, 0xB011 }, + { 0x2128, 0x0005, 0x460D, 0xB017 }, { 0x212C, 0x00F6, 0x73E5, 0xB017 }, + { 0x2130, 0x0005, 0x460D, 0xB017 }, { 0x2134, 0x00C0, 0xE9E5, 0xB017 }, + { 0x2138, 0x00D5, 0x010B, 0xB017 }, { 0x213C, 0x009D, 0x7809, 0xB017 }, + { 0x2140, 0x00C5, 0x0EED, 0xB017 }, { 0x2144, 0x009D, 0x7809, 0xB017 }, + { 0x2148, 0x00C4, 0x4EF0, 0xB017 }, { 0x214C, 0x003A, 0x3106, 0xB017 }, + { 0x2150, 0x00AF, 0x750E, 0xB017 }, { 0x2154, 0x008C, 0x1FF1, 0xB017 }, + { 0x2158, 0x009E, 0x360C, 0xB017 }, { 0x215C, 0x008C, 0x1FF1, 0xB017 }, + { 0x2160, 0x004D, 0xAC0A, 0xB017 }, { 0x2164, 0x007D, 0xA00F, 0xB017 }, + { 0x2168, 0x00E1, 0x9CE3, 0xB017 }, { 0x216C, 0x00E8, 0x590E, 0xB017 }, + { 0x2170, 0x00E1, 0x9CE3, 0xB017 }, { 0x2174, 0x0066, 0xFA0D, 0xB017 }, + { 0x2178, 0x0000, 0x0010, 0xB017 }, { 0x217C, 0x0000, 0x0000, 0xB017 }, + { 0x2180, 0x0000, 0x0000, 0xB017 }, { 0x2184, 0x0000, 0x0000, 0xB017 }, + { 0x2188, 0x0000, 0x0000, 0xB017 }, { 0x218C, 0x0000, 0x0010, 0xB017 }, + { 0x2190, 0x0000, 0x0000, 0xB017 }, { 0x2194, 0x0000, 0x0000, 0xB017 }, + { 0x2198, 0x0000, 0x0000, 0xB017 }, { 0x219C, 0x0000, 0x0000, 0xB017 }, + { 0x21A0, 0x0000, 0x0010, 0xB017 }, { 0x21A4, 0x0000, 0x0000, 0xB017 }, + { 0x21A8, 0x0000, 0x0000, 0xB017 }, { 0x21AC, 0x0000, 0x0000, 0xB017 }, + { 0x21B0, 0x0000, 0x0000, 0xB017 }, { 0x21B4, 0x0000, 0x0010, 0xB017 }, + { 0x21B8, 0x0000, 0x0000, 0xB017 }, { 0x21BC, 0x0000, 0x0000, 0xB017 }, + { 0x21C0, 0x0000, 0x0000, 0xB017 }, { 0x21C4, 0x0000, 0x0000, 0xB017 }, + { 0x23B9, 0x0000, 0x0000, 0xB011 }, { 0x23E0, 0x0000, 0x0020, 0xB011 }, + { 0x23E1, 0x0000, 0x0001, 0xB011 }, + }; + + static const unsigned short amp_0x3d[][4] = { + { 0x2000, 0x0000, 0x0001, 0xB011 }, { 0x23FF, 0x0000, 0x0000, 0xB011 }, + { 0x203A, 0x0000, 0x0080, 0xB011 }, { 0x23E1, 0x0000, 0x0000, 0xB011 }, + { 0x2012, 0x0000, 0x006F, 0xB011 }, { 0x2014, 0x0000, 0x0000, 0xB011 }, + { 0x201B, 0x0000, 0x0002, 0xB011 }, { 0x201D, 0x0000, 0x0002, 0xB011 }, + { 0x201F, 0x0000, 0x00FD, 0xB011 }, { 0x2021, 0x0000, 0x0001, 0xB011 }, + { 0x2022, 0x0000, 0x0010, 0xB011 }, { 0x203D, 0x0000, 0x0005, 0xB011 }, + { 0x203F, 0x0000, 0x0003, 0xB011 }, { 0x2050, 0x0000, 0x002C, 0xB011 }, + { 0x2076, 0x0000, 0x000E, 0xB011 }, { 0x207C, 0x0000, 0x004A, 0xB011 }, + { 0x2081, 0x0000, 0x0003, 0xB011 }, { 0x23BA, 0x0000, 0x008D, 0xB011 }, + { 0x2128, 0x0005, 0x460D, 0xB017 }, { 0x212C, 0x00F6, 0x73E5, 0xB017 }, + { 0x2130, 0x0005, 0x460D, 0xB017 }, { 0x2134, 0x00C0, 0xE9E5, 0xB017 }, + { 0x2138, 0x00D5, 0x010B, 0xB017 }, { 0x213C, 0x009D, 0x7809, 0xB017 }, + { 0x2140, 0x00C5, 0x0EED, 0xB017 }, { 0x2144, 0x009D, 0x7809, 0xB017 }, + { 0x2148, 0x00C4, 0x4EF0, 0xB017 }, { 0x214C, 0x003A, 0x3106, 0xB017 }, + { 0x2150, 0x00AF, 0x750E, 0xB017 }, { 0x2154, 0x008C, 0x1FF1, 0xB017 }, + { 0x2158, 0x009E, 0x360C, 0xB017 }, { 0x215C, 0x008C, 0x1FF1, 0xB017 }, + { 0x2160, 0x004D, 0xAC0A, 0xB017 }, { 0x2164, 0x007D, 0xA00F, 0xB017 }, + { 0x2168, 0x00E1, 0x9CE3, 0xB017 }, { 0x216C, 0x00E8, 0x590E, 0xB017 }, + { 0x2170, 0x00E1, 0x9CE3, 0xB017 }, { 0x2174, 0x0066, 0xFA0D, 0xB017 }, + { 0x2178, 0x0000, 0x0010, 0xB017 }, { 0x217C, 0x0000, 0x0000, 0xB017 }, + { 0x2180, 0x0000, 0x0000, 0xB017 }, { 0x2184, 0x0000, 0x0000, 0xB017 }, + { 0x2188, 0x0000, 0x0000, 0xB017 }, { 0x218C, 0x0000, 0x0010, 0xB017 }, + { 0x2190, 0x0000, 0x0000, 0xB017 }, { 0x2194, 0x0000, 0x0000, 0xB017 }, + { 0x2198, 0x0000, 0x0000, 0xB017 }, { 0x219C, 0x0000, 0x0000, 0xB017 }, + { 0x21A0, 0x0000, 0x0010, 0xB017 }, { 0x21A4, 0x0000, 0x0000, 0xB017 }, + { 0x21A8, 0x0000, 0x0000, 0xB017 }, { 0x21AC, 0x0000, 0x0000, 0xB017 }, + { 0x21B0, 0x0000, 0x0000, 0xB017 }, { 0x21B4, 0x0000, 0x0010, 0xB017 }, + { 0x21B8, 0x0000, 0x0000, 0xB017 }, { 0x21BC, 0x0000, 0x0000, 0xB017 }, + { 0x21C0, 0x0000, 0x0000, 0xB017 }, { 0x21C4, 0x0000, 0x0000, 0xB017 }, + { 0x23B9, 0x0000, 0x0000, 0xB011 }, { 0x23E0, 0x0000, 0x0020, 0xB011 }, + { 0x23E1, 0x0000, 0x0001, 0xB011 }, + }; + + static const unsigned short amp_seq1[][4] = { + { 0x23FF, 0x0000, 0x0000, 0xB011 }, { 0x203A, 0x0000, 0x0080, 0xB011 }, + }; + + static const struct alc298_samsung_coeff_fixup_desc fixups2[] = { + { 0x4f, 0xb029 }, { 0x05, 0x2be0 }, { 0x30, 0x2421 }, + }; + + + static const unsigned short amp_seq2[][4] = { + { 0x203A, 0x0000, 0x0081, 0xB011 }, { 0x23FF, 0x0000, 0x0001, 0xB011 }, + }; + + if (action != HDA_FIXUP_ACT_INIT) + return; + + ///// First set of fixups + for (i = 0; i < ARRAY_SIZE(fixups1); i++) + alc_write_coef_idx(codec, fixups1[i].coeff_idx, fixups1[i].coeff_value); + + ///// First set of writes + alc298_samsung_write_coef_pack_seq(codec, 0x38, amp_0x38, ARRAY_SIZE(amp_0x38)); + alc298_samsung_write_coef_pack_seq(codec, 0x39, amp_0x39, ARRAY_SIZE(amp_0x39)); + alc298_samsung_write_coef_pack_seq(codec, 0x3c, amp_0x3c, ARRAY_SIZE(amp_0x3c)); + alc298_samsung_write_coef_pack_seq(codec, 0x3d, amp_0x3d, ARRAY_SIZE(amp_0x3d)); + + ///// Second set of writes + alc298_samsung_write_coef_pack_seq(codec, 0x38, amp_seq1, ARRAY_SIZE(amp_seq1)); + alc298_samsung_write_coef_pack_seq(codec, 0x39, amp_seq1, ARRAY_SIZE(amp_seq1)); + alc298_samsung_write_coef_pack_seq(codec, 0x3c, amp_seq1, ARRAY_SIZE(amp_seq1)); + alc298_samsung_write_coef_pack_seq(codec, 0x3d, amp_seq1, ARRAY_SIZE(amp_seq1)); + + ////// Second set of fixups + for (i = 0; i < ARRAY_SIZE(fixups2); i++) + alc_write_coef_idx(codec, fixups2[i].coeff_idx, fixups2[i].coeff_value); + + ///// Third set of writes + alc298_samsung_write_coef_pack_seq(codec, 0x38, amp_seq2, ARRAY_SIZE(amp_seq2)); + alc298_samsung_write_coef_pack_seq(codec, 0x39, amp_seq2, ARRAY_SIZE(amp_seq2)); + alc298_samsung_write_coef_pack_seq(codec, 0x3c, amp_seq2, ARRAY_SIZE(amp_seq2)); + alc298_samsung_write_coef_pack_seq(codec, 0x3d, amp_seq2, ARRAY_SIZE(amp_seq2)); + + ///// Final fixup + alc_write_coef_idx(codec, 0x10, 0x0F21); +} + #if IS_REACHABLE(CONFIG_INPUT) static void gpio2_mic_hotkey_event(struct hda_codec *codec, struct hda_jack_callback *event) @@ -7426,6 +7724,7 @@ enum { ALC236_FIXUP_HP_MUTE_LED, ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF, ALC298_FIXUP_SAMSUNG_AMP, + ALC298_FIXUP_SAMSUNG_AMP2, ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET, ALC256_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET, ALC295_FIXUP_ASUS_MIC_NO_PRESENCE, @@ -9021,6 +9320,10 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id = ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET }, + [ALC298_FIXUP_SAMSUNG_AMP2] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc298_fixup_samsung_amp2 + }, [ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET] = { .type = HDA_FIXUP_VERBS, .v.verbs = (const struct hda_verb[]) { @@ -10352,6 +10655,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x144d, 0xc832, "Samsung Galaxy Book Flex Alpha (NP730QCJ)", ALC256_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET), SND_PCI_QUIRK(0x144d, 0xca03, "Samsung Galaxy Book2 Pro 360 (NP930QED)", ALC298_FIXUP_SAMSUNG_AMP), SND_PCI_QUIRK(0x144d, 0xc868, "Samsung Galaxy Book2 Pro (NP930XED)", ALC298_FIXUP_SAMSUNG_AMP), + SND_PCI_QUIRK(0x144d, 0xc1ca, "Samsung Galaxy Book3 Pro 360 (NP960QFG-KB1US)", ALC298_FIXUP_SAMSUNG_AMP2), SND_PCI_QUIRK(0x1458, 0xfa53, "Gigabyte BXBT-2807", ALC283_FIXUP_HEADSET_MIC), SND_PCI_QUIRK(0x1462, 0xb120, "MSI Cubi MS-B120", ALC283_FIXUP_HEADSET_MIC), SND_PCI_QUIRK(0x1462, 0xb171, "Cubi N 8GL (MS-B171)", ALC283_FIXUP_HEADSET_MIC), @@ -10781,6 +11085,7 @@ static const struct hda_model_fixup alc269_fixup_models[] = { {.id = ALC298_FIXUP_HUAWEI_MBX_STEREO, .name = "huawei-mbx-stereo"}, {.id = ALC256_FIXUP_MEDION_HEADSET_NO_PRESENCE, .name = "alc256-medion-headset"}, {.id = ALC298_FIXUP_SAMSUNG_AMP, .name = "alc298-samsung-amp"}, + {.id = ALC298_FIXUP_SAMSUNG_AMP2, .name = "alc298-samsung-amp2"}, {.id = ALC256_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET, .name = "alc256-samsung-headphone"}, {.id = ALC255_FIXUP_XIAOMI_HEADSET_MIC, .name = "alc255-xiaomi-headset"}, {.id = ALC274_FIXUP_HP_MIC, .name = "alc274-hp-mic-detect"}, -- 2.45.2

1 0

[PATCH v10] ALSA: hda/tas2781: Add tas2781 hda SPI driver
by Baojun Xu 21 Jul '24

21 Jul '24

This patch was used to add TAS2781 devices on SPI support in sound/pci/hda. It use ACPI node descript about parameters of TAS2781 on SPI, it like: Scope (_SB.PC00.SPI0) { Device (GSPK) { Name (_HID, "TXNW2781") // _HID: Hardware ID Method (_CRS, 0, NotSerialized) { Name (RBUF, ResourceTemplate () { SpiSerialBusV2 (...) SpiSerialBusV2 (...) } } } } And in platform/x86/serial-multi-instantiate.c, those spi devices will be added into system as a single SPI device, so TAS2781 SPI driver will probe twice for every single SPI device. And driver will also parser mono DSP firmware binary and RCA binary for itself. The code support Realtek as the primary codec. In patch version-10, add multi devices firmware binary support, to compatble with windows driver, they can share same firmware binary. Signed-off-by: Baojun Xu <baojun.xu(a)ti.com> --- v10: - Remove project id 103c8b93 in Patch_realtek.c, as it was used for test only, offcial project id is 103c8daa (Gemtree). - Add TAS2781_REG_CLK_CONFIG for check if AMP has been reset. - Add table for pre-reset and post-reset. - Perform pre-reset config before reset AMP. - Perform post-reset config after reset AMP. - Fix wrong offset in calibration data issue. - Remove tuning switch after firmware download. - Force stop play in runtime suspend. - Apply patch for component change in bind & unbind. - Remove program download and calibration data apply, switch tuning only in runtime resume. - Check if AMP has reseted in system resume, and do firmware download and calibration data apply. - Change flag 0xCx to 0x8x for coeff data force download. - Add device index for multi device firmware binary file compatible. - Check device index before registers write during firmware download. - Force config data download after program download. - Remove config download in tuning switch. v9: - Add parentheses for variables in micro define. - Add define for calibration registers address identify. - Change variable name from calibration_data to cali_data. - Add variable for calibration registers address in struct tasdevice_priv. - Change format for alignment to parentheses. - Remove tas2781_reg_defaults as it will be over write in firmware download. - Remove RESET for second device in tas2781_spi_reset(), as it will cause no sound on second device. - Add calibration registers address initial in tasdevice_spi_init(). - Remove unnecessary parentheses. - Remove exception in tas2781_hda_playback_hook(). - Remove hard code for calibration registers address. - Add support for calibration data format V3 for registers address identify, as new firmware tool will define calibration registers address dynamic, so can't hard code it, need read it from BIOS with calibration data. - Remove some debug print. - Change hard code value (3) to ARRAY_SIZE(tas2781_snd_controls)/2. - New patch apply for change position of component_del(). - Change label from out, out1 to config_err and block_err. - Remove unnecessary parentheses in tas2781_spi_fwlib.c. - Remove tasdevice_spi_prmg_calibdata_load(). v8: - Move *-y position in sound/pci/hda/Makefile. - Change + to | for bit operation in macro define. - Change TASDEVICE_Checksum to TASDEVICE_CHECKSUM. v7: - Add new project Gemtree (0x103c8daa) support for tas2781 spi driver. v6: - Remove client in tasdevice_priv struct as it was not used. - Change format for tasdevice_spi_dev_write() in tas2781_hda_spi.c. - Change update bits function to read & write mode, as tas2781 use last bit to mask read & write, it cause regmap_update_bits work not as our expected. - Add element in tas2781_snd_controls, tas2781_prof_ctrl, tas2781_dsp_conf_ctrl, to support second device. Previous version add sound card for first index only. - Change calibration registers address declaire to TASDEVICE_REG() mode. - Add snd_ctl_new1() for second device. - Change format for tas2781_hda_unbind() to fit 79 chars in one line. - Remove client for spi as it was not used. - Remove unused variables. - Remove cur_prog clean in runtime_suspend(). - Remove unused variables. - Add tasdevice_spi_tuning_switch() in runtime_resume. - Remove cur_prog clean in system_resume(). - Add tuning switch if playback started in system_resume(). - Change TASDEVICE_PAGE_REG to TASDEVICE_REG_ID in tas2781_spi_fwlib.c. - Remove calibration binary load functions as data will be loaded from EFI. v5: - Combined all modification into one patch for pass the compile. - Remove old hardware id "TIAS2781" as no production on market. - Change max page size to 256 in tas2781-spi.h. - Change book reg from 127 to GENMASK(7, 1), as one bit shift is needed. - Change register address define as one bit shift needed for offset. - Change block check sum comments to Firmware block from I2C. - Change define of (page + reg) to TASDEVICE_PAGE_REG from TASDEVICE_PGRG. - Change to lower case in defined value. - Add registers default value table in tas2781_hda_spi.c - Change rang_max to 256 * 256. - Add zero_flag_mask in regmap_config. - Change max_register to 256 * 256. - Add registers default table into structure regmap_config. - Change parameter from book number to whole register address. - Remove page 0 switch as SPI driver will do it. - Add bit(0) for read function as tas2781 will check last bit of address, to determine operation mode is read (1) or write (0). - Change switch case to if check in tas2781_hda_playback_hook(), as it may cause compile problem in clang-19 building. - Change variable declaration position. - Change order in if check. - Remove old hardware id ("TIAS2781") support. - Remove debug message in runtime suspend and resume. - Remove regmap.h include in tas2781_spi_fwlib.c. - Remove MODULE_ in fwlib as this file will work with tas2781_hda_spi.c only. v4: - Add old hardware id "TIAS2781" for compatible with old production - Add 2 devices in struct smi_node tas2781_hda, to compatible with 4 AMPs v4: - Add old hardware id "TIAS2781" for compatible with old production - Add 2 devices in struct smi_node tas2781_hda, to compatible with 4 AMPs - Move include of sound/tas2781-dsp.h to c source file tas2781_hda_spi.c, tas2781_spi_fwlib.c, as it's not needed in header file tas2781-spi.h - Use page and book number define in other micro define - Change 4000000 to (4 * HZ_PER_MHZ) - Add define for calibration variable name and size in UEFI. - Remove structure tasdevice & tasdevice_irqinfo, and move variables in to structure tasdevice_priv - Remove some unused variables in sttructure tasdevice_priv - Remove function declare of tascodec_init(), use tascodec_spi_init() - Remove function declare of tasdevice_remove() - Add array_size.h included in tas2781_hda_spi.c - Add cleanup.h included for change mutex to guard - Add units.h included - Include tas2781-dsp.h - Remove unused variables in tas2781_hda structure - Change 0xff to GENMASK(7, 0) - Change 128 to define of max page size - Change code as all variables was moved to tasdevice_priv structure - Change comments for error in book write, or page write - Remove initial of ret, and return 0 directly - Change comments for wrong typo, add space in front and end - Add check for bulk read, max size should be a page size - Change usleep_rang() to fsleep() - Change mutex_lock to guard(mutex), and remove mutex_unlock() - Change tasdevice_spi_init() to void from int as no value return required - Change second parameter to sizeof - Remove tasdevice_clamp(), use clamp() - Add compatible with old hardware id "TIAS2781" - Remove cs_gpio and spi device in tas2781_read_acpi() as use default CS - Change dev-index check, return -EINVAL if it's <= 0 - Change 0xFF to U8_MAX - Remove GPIO get for chip-select, use default from SPI device - Perform RESET in first AMP only as all AMPs share same RESET pin - return 0 directly in some simple routine to avoid variable initial - Change comments for function which was used by system - Change "ON" "OFF" to function str_on_off(...) - Change format of GUID - Add temp buffer for first efi.get_variable() - Free data if it was allocated - Change format of debug message of calibration date time print - Remove total_sz = 0, as it's not needed - Move save_calibration to after tuning_switch to avoid calibration data overwrite - Remove dev from structure tasdevice_hda, use dev in tasdevice_priv - Remove 0 from { "tas2781-hda", 0}, & {"TXNW2781", 0}, - Add old hardware id "TIAS2781" for compatible with old production - Add 2 devices in struct smi_node tas2781_hda, to compatible with 4 AMPs v3: - Move HID up to above /* Non-conforming _HID ... */ in scan.c, for avoid misunderstanding. - Move HID up to above /* Non-conforming _HID ... */ in serial-multi-instantiate.c, for avoid misunderstanding. - Change objs to y for snd-hda-scodec-tas2781-spi- in Makefile. - Change format for some define in tas2781-spi.h. - Add define for TASDEVICE_MAX_BOOK_NUM, TASDEVICE_MAX_PAGE. - Move declare of "enum calib_data {" to header file from source file. - Remove "enum device_catlog_id {" as only one platform was supported now. - Remove "struct calidata", as we will save pure calibration data only. - Remove "struct calidata", "enum device_catlog_id" in tasdevice_priv. - Add calibration_data in tasdevice_priv to save pure calibration data. - Remove declare of tasdevice_save_calibration() and tasdevice_apply_calibration(), as it will be used within same c file. - Add below header files included in tas2781_hda_spi.c: bits.h, mutex.h, property.h, time.h, types.h. - Move two micro define to header file tas2781-spi.h. - Change format of some micro define. - Change format of some structure. - Remove irq in tas2781_hda, as have it already in tasdevice_priv. - Remove some local functions declare as not necessarily. - Return error if regmap_write() failed. - Change fixed value 2 to sizeof(data). - Remove all of EXPORT_SYMBOL_GPL, as all of function was called within same module. - Remove empty line after last return in some functions. - Remove some variable initialyzation. - Remove variable sub, store acpi_subsystem_id directly. - Remove wrong comments for device index, it's must, can't be NULL. - Remove some local variables, use elements in structure directly. - Append commas in last element of an array. - Change calibration data process, didn't save all of calibration data in EFI, get in local, and save pure calibration data in tasdevice_priv. - Call tasdevice_save_calibration() from function pointer in tasdevice_priv; - Remove subid as one platform was supported only, needn't check. - Add initialyzation for local variable. - Move regmap initialyzation to before acpi read. - Call tasdevice_apply_calibration() from function pointer in tasdevice_priv; - Remove MODULE_IMPORT_NS(SND_SOC_TAS2781_FMWLIB), as all functions was performed within same module. - Update format and variables declare order. - Change format of multi conditions for if. - Remove casting which is not needed. - Change variables type to avoid casting. - Remove Unneeded parentheses. - Change if check to avoid goto. - Add {} for keep same style. - Remove some local variables, use elements in structure directly. v2: - Change depends on SPI to SPI_MASTER in sound/pci/hda/Kconfig - Add select SND_HDA_SCODEC_COMPONENT in sound/pci/hda/Kconfig - Change comp_generic_fixup() 5th parameter from "-%s:00" to "-%s:00-tas2781-hda.%d" in sound/pci/hda/patch_realtek.c - Change chain_id from ALC285_FIXUP_THINKPAD_HEADSET_JACK to ALC285_FIXUP_HP_GPIO_LED in sound/pci/hda/patch_realtek.c - Remove project name "Gemtree" - Update information in file header of tas2781-spi.h. - Remove useless micro define. - Change TASDEVICE_I2CChecksum to TASDEVICE_Checksum - Remove enum control_bus as current code support SPI only. - Remove device define as current code support TAS2781 only. - Remove spi_device **spi_devs in structure tasdevice_priv. - Remove cal_binaryname in structure tasdevice_priv. - Remove ndev in structure tasdevice_priv. - Change isacpi and isspi, replace by control_bus(I2C or SPI). - Remove void tasdevice_spi_dsp_remove(void *context). - Add acpi_device and irq in structure tas2781_hda in tas2781_hda_spi.c. - Remove parameter chn in all of registers access functions. - Add tascodec_spi_init(). - Add chip select gpio set for SPI device. - Change tasdevice_tuning_switch() to tasdevice_spi_tuning_switch(). - Change device offset from tas_priv->ndev to tas_priv->index. - Change tasdevice_dsp_remove() to tasdevice_spi_dsp_remove(). - tasdevice_prmg_load() to tasdevice_spi_prmg_load(). - Change tasdevice_config_info_remove() to tasdevice_spi_config_info_remove(). - Add one dummy byte shift when read from page 2~127, or not book 0. - Change tasdevice_spi_change_chn_book() to tasdevice_spi_switch_book() - Perform put_device(physdev) before error return. - Change calibration data id to 2781 from 2783 in EFI - Change calibration data structure name in comments. - Remove file name in tas2781_spi_fwlib.c. - Remove #include <linux/i2c.h> as it not needed in SPI mode. - Change TAB to speace in micro define in tas2781_spi_fwlib.c. - Change to up-case for DSP. - Change all of multi-line comments format, empty first line. - Change all of sizeof(struct xx) to sizeof(*xx). - Remove Explicit casting for variables compare to avoid possible fault. - Return directly without goto. - Change 1 << xx to BIT(xx). - Remove deviceNumber[] as current SPI device will support one device only. - Add memory free before return error. - Change "buf[offset]; offset += 1" to buf[offset++]. - Remove some debug information print. - Change firmware binary to single device mode. - Change all bexx_to_cpup() to get_unaligned_bexx(). - Remove ndev process as current SPI device support single device only. - Remove chn and chnend for single device support only. - Change all of registers read/write function, remove parameter chn. - Create new function for single write, burst write, delay, field write in tasdevice_process_block(). --- drivers/acpi/scan.c | 1 + .../platform/x86/serial-multi-instantiate.c | 12 + sound/pci/hda/Kconfig | 14 + sound/pci/hda/Makefile | 2 + sound/pci/hda/patch_realtek.c | 13 + sound/pci/hda/tas2781-spi.h | 158 ++ sound/pci/hda/tas2781_hda_spi.c | 1317 ++++++++++ sound/pci/hda/tas2781_spi_fwlib.c | 2115 +++++++++++++++++ 8 files changed, 3632 insertions(+) create mode 100644 sound/pci/hda/tas2781-spi.h create mode 100644 sound/pci/hda/tas2781_hda_spi.c create mode 100644 sound/pci/hda/tas2781_spi_fwlib.c diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 59771412686b..b1a8bf1043da 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -1769,6 +1769,7 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device) {"CSC3557", }, {"INT33FE", }, {"INT3515", }, + {"TXNW2781", }, /* Non-conforming _HID for Cirrus Logic already released */ {"CLSA0100", }, {"CLSA0101", }, diff --git a/drivers/platform/x86/serial-multi-instantiate.c b/drivers/platform/x86/serial-multi-instantiate.c index 3be016cfe601..b15c819023d0 100644 --- a/drivers/platform/x86/serial-multi-instantiate.c +++ b/drivers/platform/x86/serial-multi-instantiate.c @@ -368,6 +368,17 @@ static const struct smi_node cs35l57_hda = { .bus_type = SMI_AUTO_DETECT, }; +static const struct smi_node tas2781_hda = { + .instances = { + { "tas2781-hda", IRQ_RESOURCE_AUTO, 0 }, + { "tas2781-hda", IRQ_RESOURCE_AUTO, 0 }, + { "tas2781-hda", IRQ_RESOURCE_AUTO, 0 }, + { "tas2781-hda", IRQ_RESOURCE_AUTO, 0 }, + {} + }, + .bus_type = SMI_AUTO_DETECT, +}; + /* * Note new device-ids must also be added to ignore_serial_bus_ids in * drivers/acpi/scan.c: acpi_device_enumeration_by_parent(). @@ -380,6 +391,7 @@ static const struct acpi_device_id smi_acpi_ids[] = { { "CSC3556", (unsigned long)&cs35l56_hda }, { "CSC3557", (unsigned long)&cs35l57_hda }, { "INT3515", (unsigned long)&int3515_data }, + { "TXNW2781", (unsigned long)&tas2781_hda }, /* Non-conforming _HID for Cirrus Logic already released */ { "CLSA0100", (unsigned long)&cs35l41_hda }, { "CLSA0101", (unsigned long)&cs35l41_hda }, diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig index bb15a0248250..62cd9ba408e2 100644 --- a/sound/pci/hda/Kconfig +++ b/sound/pci/hda/Kconfig @@ -206,6 +206,20 @@ config SND_HDA_SCODEC_TAS2781_I2C comment "Set to Y if you want auto-loading the side codec driver" depends on SND_HDA=y && SND_HDA_SCODEC_TAS2781_I2C=m +config SND_HDA_SCODEC_TAS2781_SPI + tristate "Build TAS2781 HD-audio side codec support for SPI Bus" + depends on SPI_MASTER + depends on ACPI + depends on EFI + depends on SND_SOC + select CRC32_SARWATE + help + Say Y or M here to include TAS2781 SPI HD-audio side codec support + in snd-hda-intel driver, such as ALC287. + +comment "Set to Y if you want auto-loading the side codec driver" + depends on SND_HDA=y && SND_HDA_SCODEC_TAS2781_SPI=m + config SND_HDA_CODEC_REALTEK tristate "Build Realtek HD-audio codec support" select SND_HDA_GENERIC diff --git a/sound/pci/hda/Makefile b/sound/pci/hda/Makefile index 80210f845df2..210c406dfbc5 100644 --- a/sound/pci/hda/Makefile +++ b/sound/pci/hda/Makefile @@ -40,6 +40,7 @@ snd-hda-scodec-cs35l56-spi-y := cs35l56_hda_spi.o snd-hda-cs-dsp-ctls-y := hda_cs_dsp_ctl.o snd-hda-scodec-component-y := hda_component.o snd-hda-scodec-tas2781-i2c-y := tas2781_hda_i2c.o +snd-hda-scodec-tas2781-spi-y := tas2781_hda_spi.o tas2781_spi_fwlib.o # common driver obj-$(CONFIG_SND_HDA) := snd-hda-codec.o @@ -72,6 +73,7 @@ obj-$(CONFIG_SND_HDA_SCODEC_CS35L56_SPI) += snd-hda-scodec-cs35l56-spi.o obj-$(CONFIG_SND_HDA_CS_DSP_CONTROLS) += snd-hda-cs-dsp-ctls.o obj-$(CONFIG_SND_HDA_SCODEC_COMPONENT) += snd-hda-scodec-component.o obj-$(CONFIG_SND_HDA_SCODEC_TAS2781_I2C) += snd-hda-scodec-tas2781-i2c.o +obj-$(CONFIG_SND_HDA_SCODEC_TAS2781_SPI) += snd-hda-scodec-tas2781-spi.o # this must be the last entry after codec drivers; # otherwise the codec patches won't be hooked before the PCI probe diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index c3a86a99f8c6..51707270943a 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6924,6 +6924,11 @@ static void tas2781_fixup_i2c(struct hda_codec *cdc, comp_generic_fixup(cdc, action, "i2c", "TIAS2781", "-%s:00", 1); } +static void tas2781_fixup_spi(struct hda_codec *cdc, const struct hda_fixup *fix, int action) +{ + comp_generic_fixup(cdc, action, "spi", "TXNW2781", "-%s:00-tas2781-hda.%d", 2); +} + static void yoga7_14arb7_fixup_i2c(struct hda_codec *cdc, const struct hda_fixup *fix, int action) { @@ -7501,6 +7506,7 @@ enum { ALC236_FIXUP_DELL_DUAL_CODECS, ALC287_FIXUP_CS35L41_I2C_2_THINKPAD_ACPI, ALC287_FIXUP_TAS2781_I2C, + ALC245_FIXUP_TAS2781_SPI_2, ALC287_FIXUP_YOGA7_14ARB7_I2C, ALC245_FIXUP_HP_MUTE_LED_COEFBIT, ALC245_FIXUP_HP_X360_MUTE_LEDS, @@ -9726,6 +9732,12 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id = ALC285_FIXUP_THINKPAD_HEADSET_JACK, }, + [ALC245_FIXUP_TAS2781_SPI_2] = { + .type = HDA_FIXUP_FUNC, + .v.func = tas2781_fixup_spi, + .chained = true, + .chain_id = ALC285_FIXUP_HP_GPIO_LED, + }, [ALC287_FIXUP_YOGA7_14ARB7_I2C] = { .type = HDA_FIXUP_FUNC, .v.func = yoga7_14arb7_fixup_i2c, @@ -10263,6 +10275,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x8cdf, "HP SnowWhite", ALC287_FIXUP_CS35L41_I2C_2_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x8ce0, "HP SnowWhite", ALC287_FIXUP_CS35L41_I2C_2_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x8cf5, "HP ZBook Studio 16", ALC245_FIXUP_CS35L41_SPI_4_HP_GPIO_LED), + SND_PCI_QUIRK(0x103c, 0x8daa, "HP Gemtree", ALC245_FIXUP_TAS2781_SPI_2), SND_PCI_QUIRK(0x1043, 0x103e, "ASUS X540SA", ALC256_FIXUP_ASUS_MIC), SND_PCI_QUIRK(0x1043, 0x103f, "ASUS TX300", ALC282_FIXUP_ASUS_TX300), SND_PCI_QUIRK(0x1043, 0x106d, "Asus K53BE", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), diff --git a/sound/pci/hda/tas2781-spi.h b/sound/pci/hda/tas2781-spi.h new file mode 100644 index 000000000000..0cadfd18bde2 --- /dev/null +++ b/sound/pci/hda/tas2781-spi.h @@ -0,0 +1,158 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +// +// ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier +// +// Copyright (C) 2024 Texas Instruments Incorporated +// https://www.ti.com +// +// The TAS2781 driver implements a flexible and configurable +// algo coefficient setting for TAS2781 chips. +// +// Author: Baojun Xu <baojun.xu(a)ti.com> +// + +#ifndef __TAS2781_SPI_H__ +#define __TAS2781_SPI_H__ + +#define TASDEVICE_RATES \ + (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | \ + SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_88200) + +#define TASDEVICE_FORMATS \ + (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE | \ + SNDRV_PCM_FMTBIT_S32_LE) + +#define TASDEVICE_MAX_BOOK_NUM 256 +#define TASDEVICE_MAX_PAGE 256 + +#define TASDEVICE_MAX_SIZE (TASDEVICE_MAX_BOOK_NUM * TASDEVICE_MAX_PAGE) + +/* PAGE Control Register (available in page0 of each book) */ +#define TASDEVICE_PAGE_SELECT 0x00 +#define TASDEVICE_BOOKCTL_PAGE 0x00 +#define TASDEVICE_BOOKCTL_REG GENMASK(7, 1) +#define TASDEVICE_BOOK_ID(reg) (((reg) & GENMASK(24, 16)) >> 16) +#define TASDEVICE_PAGE_ID(reg) (((reg) & GENMASK(15, 8)) >> 8) +#define TASDEVICE_REG_ID(reg) (((reg) & GENMASK(7, 1)) >> 1) +#define TASDEVICE_PAGE_REG(reg) ((reg) & GENMASK(15, 1)) +#define TASDEVICE_REG(book, page, reg) \ + (((book) << 16) | ((page) << 8) | ((reg) << 1)) + +/* Software Reset */ +#define TAS2781_REG_SWRESET TASDEVICE_REG(0x0, 0x0, 0x01) +#define TAS2781_REG_SWRESET_RESET BIT(0) + +/* System Reset Check Register */ +#define TAS2781_REG_CLK_CONFIG TASDEVICE_REG(0x0, 0x0, 0x5c) +#define TAS2781_REG_CLK_CONFIG_RESET (0x19) + +/* Block Checksum */ +#define TASDEVICE_CHECKSUM TASDEVICE_REG(0x0, 0x0, 0x7e) + +/* Volume control */ +#define TAS2781_DVC_LVL TASDEVICE_REG(0x0, 0x0, 0x1a) +#define TAS2781_AMP_LEVEL TASDEVICE_REG(0x0, 0x0, 0x03) +#define TAS2781_AMP_LEVEL_MASK GENMASK(5, 1) + +#define TASDEVICE_CMD_SING_W 0x1 +#define TASDEVICE_CMD_BURST 0x2 +#define TASDEVICE_CMD_DELAY 0x3 +#define TASDEVICE_CMD_FIELD_W 0x4 + +#define TAS2781_SPI_MAX_FREQ (4 * HZ_PER_MHZ) + +#define TASDEVICE_CRC8_POLYNOMIAL 0x4d +#define TASDEVICE_SPEAKER_CALIBRATION_SIZE 20 + +/* Flag of calibration registers address. */ +#define TASDEVICE_CALIBRATION_REG_ADDRESS BIT(7) + +#define TASDEVICE_CALIBRATION_DATA_NAME L"CALI_DATA" +#define TASDEVICE_CALIBRATION_DATA_SIZE 256 + +enum calib_data { + R0_VAL = 0, + INV_R0, + R0LOW, + POWER, + TLIM, + CALIB_MAX +}; + +struct tasdevice_priv { + struct tasdevice_fw *cali_data_fmw; + struct tasdevice_rca rcabin; + struct tasdevice_fw *fmw; + struct gpio_desc *reset; + struct mutex codec_lock; + struct regmap *regmap; + struct device *dev; + struct tm tm; + + const char *acpi_subsystem_id; + unsigned char crc8_lkp_tbl[CRC8_TABLE_SIZE]; + unsigned char coef_binaryname[64]; + unsigned char rca_binaryname[64]; + unsigned char dev_name[32]; + + unsigned int err_code; + bool is_loading; + bool is_loaderr; + int cur_book; + int cur_prog; + int cur_conf; + int fw_state; + int index; + int irq; + void *codec; + bool force_fwload_status; + bool playback_started; + unsigned int cali_data[CALIB_MAX]; + unsigned int cali_reg_array[CALIB_MAX]; + + int (*fw_parse_variable_header)(struct tasdevice_priv *tas_priv, + const struct firmware *fmw, + int offset); + int (*fw_parse_program_data)(struct tasdevice_priv *tas_priv, + struct tasdevice_fw *tas_fmw, + const struct firmware *fmw, int offset); + int (*fw_parse_configuration_data)(struct tasdevice_priv *tas_priv, + struct tasdevice_fw *tas_fmw, + const struct firmware *fmw, + int offset); + int (*tasdevice_load_block)(struct tasdevice_priv *tas_priv, + struct tasdev_blk *block); + + int (*save_calibration)(struct tasdevice_priv *tas_priv); + void (*apply_calibration)(struct tasdevice_priv *tas_priv); +}; + +int tasdevice_spi_dev_read(struct tasdevice_priv *tas_priv, + unsigned int reg, unsigned int *value); +int tasdevice_spi_dev_write(struct tasdevice_priv *tas_priv, + unsigned int reg, unsigned int value); +int tasdevice_spi_dev_bulk_write(struct tasdevice_priv *tas_priv, + unsigned int reg, unsigned char *p_data, + unsigned int n_length); +int tasdevice_spi_dev_bulk_read(struct tasdevice_priv *tas_priv, + unsigned int reg, unsigned char *p_data, + unsigned int n_length); +int tasdevice_spi_dev_update_bits(struct tasdevice_priv *tasdevice, + unsigned int reg, unsigned int mask, + unsigned int value); + +void tasdevice_spi_select_cfg_blk(void *context, int conf_no, + unsigned char block_type); +void tasdevice_spi_config_info_remove(void *context); +int tasdevice_spi_dsp_parser(void *context); +int tasdevice_spi_rca_parser(void *context, const struct firmware *fmw); +void tasdevice_spi_dsp_remove(void *context); +void tasdevice_spi_calbin_remove(void *context); +int tasdevice_spi_select_tuningprm_cfg(void *context, int prm, int cfg_no, + int rca_conf_no); +int tasdevice_spi_prmg_load(void *context, int prm_no); +int tasdevice_spi_prmg_calibdata_load(void *context, int prm_no); +void tasdevice_spi_tuning_switch(void *context, int state); +int tas2781_spi_load_calibration(void *context, char *file_name, + unsigned short i); +#endif /* __TAS2781_SPI_H__ */ diff --git a/sound/pci/hda/tas2781_hda_spi.c b/sound/pci/hda/tas2781_hda_spi.c new file mode 100644 index 000000000000..dd979cb46fce --- /dev/null +++ b/sound/pci/hda/tas2781_hda_spi.c @@ -0,0 +1,1317 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// TAS2781 HDA SPI driver +// +// Copyright 2024 Texas Instruments, Inc. +// +// Author: Baojun Xu <baojun.xu(a)ti.com> + +#include <linux/acpi.h> +#include <linux/array_size.h> +#include <linux/bits.h> +#include <linux/cleanup.h> +#include <linux/crc8.h> +#include <linux/crc32.h> +#include <linux/efi.h> +#include <linux/firmware.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/pm_runtime.h> +#include <linux/property.h> +#include <linux/regmap.h> +#include <linux/spi/spi.h> +#include <linux/time.h> +#include <linux/types.h> +#include <linux/units.h> + +#include <sound/hda_codec.h> +#include <sound/soc.h> +#include <sound/tas2781-dsp.h> +#include <sound/tlv.h> +#include <sound/tas2781-tlv.h> + +#include "tas2781-spi.h" + +#include "hda_local.h" +#include "hda_auto_parser.h" +#include "hda_component.h" +#include "hda_jack.h" +#include "hda_generic.h" + +/* + * No standard control callbacks for SNDRV_CTL_ELEM_IFACE_CARD + * Define two controls, one is Volume control callbacks, the other is + * flag setting control callbacks. + */ + +/* Volume control callbacks for tas2781 */ +#define ACARD_SINGLE_RANGE_EXT_TLV(xname, xreg, xshift, xmin, xmax, xinvert, \ + xhandler_get, xhandler_put, tlv_array) { \ + .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = (xname), \ + .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \ + SNDRV_CTL_ELEM_ACCESS_READWRITE, \ + .tlv.p = (tlv_array), \ + .info = snd_soc_info_volsw_range, \ + .get = xhandler_get, .put = xhandler_put, \ + .private_value = (unsigned long)&(struct soc_mixer_control) { \ + .reg = xreg, .rreg = xreg, \ + .shift = xshift, .rshift = xshift,\ + .min = xmin, .max = xmax, .invert = xinvert, \ + } \ +} + +/* Flag control callbacks for tas2781 */ +#define ACARD_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) { \ + .iface = SNDRV_CTL_ELEM_IFACE_CARD, \ + .name = xname, \ + .info = snd_ctl_boolean_mono_info, \ + .get = xhandler_get, \ + .put = xhandler_put, \ + .private_value = xdata, \ +} + +struct tas2781_hda { + struct tasdevice_priv *priv; + struct acpi_device *dacpi; + struct snd_kcontrol *dsp_prog_ctl; + struct snd_kcontrol *dsp_conf_ctl; + struct snd_kcontrol *snd_ctls[3]; + struct snd_kcontrol *prof_ctl; +}; + +static const struct regmap_range_cfg tasdevice_ranges[] = { + { + .range_min = 0, + .range_max = TASDEVICE_MAX_SIZE, + .selector_reg = TASDEVICE_PAGE_SELECT, + .selector_mask = GENMASK(7, 0), + .selector_shift = 0, + .window_start = 0, + .window_len = TASDEVICE_MAX_PAGE, + }, +}; + +static const struct regmap_config tasdevice_regmap = { + .reg_bits = 8, + .val_bits = 8, + .zero_flag_mask = true, + .cache_type = REGCACHE_NONE, + .ranges = tasdevice_ranges, + .num_ranges = ARRAY_SIZE(tasdevice_ranges), + .max_register = TASDEVICE_MAX_SIZE, +}; + +struct tasdevice_table { + int reg; + unsigned char data[8]; +}; + +static struct tasdevice_table tas2781_pre_reset_table[] = { + /* Values setting for pre-reset. */ + { TASDEVICE_REG(0x00, 0x00, 0x02), {0x01, 0x1a, },}, + { TASDEVICE_REG(0x00, 0x01, 0x37), {0x01, 0x3a, },}, + { TASDEVICE_REG(0x00, 0xfd, 0x0d), {0x01, 0x0d, },}, + { TASDEVICE_REG(0x00, 0xfd, 0x06), {0x01, 0xc1, },}, + { TASDEVICE_REG(0x00, 0x01, 0x19), {0x01, 0xe0, },}, + { TASDEVICE_REG(0x00, 0xfd, 0x0d), {0x01, 0x0d, },}, + { TASDEVICE_REG(0x00, 0xfd, 0x06), {0x01, 0xd5, },}, + { TASDEVICE_REG(0x00, 0x00, 0x00), {0x01, 0x00, },}, +}; + +static struct tasdevice_table tas2781_post_reset_table[] = { + /* Values setting for post-reset. */ + { TASDEVICE_REG(0x00, 0x01, 0x37), {0x01, 0x3a, },}, + { TASDEVICE_REG(0x00, 0xfd, 0x0d), {0x01, 0x0d, },}, + { TASDEVICE_REG(0x00, 0xfd, 0x06), {0x01, 0xc1, },}, + { TASDEVICE_REG(0x00, 0xfd, 0x06), {0x01, 0xd5, },}, + { TASDEVICE_REG(0x00, 0xfd, 0x0a), {0x01, 0x01, },}, + { TASDEVICE_REG(0x00, 0x00, 0x00), {0x01, 0x00, },}, +}; + +static int tasdevice_spi_switch_book(struct tasdevice_priv *tas_priv, int reg) +{ + struct regmap *map = tas_priv->regmap; + int ret; + + if (tas_priv->cur_book != TASDEVICE_BOOK_ID(reg)) { + ret = regmap_write(map, TASDEVICE_BOOKCTL_REG, + TASDEVICE_BOOK_ID(reg)); + if (ret < 0) { + dev_err(tas_priv->dev, "Switch Book E=%d\n", ret); + return ret; + } + tas_priv->cur_book = TASDEVICE_BOOK_ID(reg); + } + return ret; +} + +int tasdevice_spi_dev_read(struct tasdevice_priv *tas_priv, + unsigned int reg, + unsigned int *val) +{ + struct regmap *map = tas_priv->regmap; + int ret; + + ret = tasdevice_spi_switch_book(tas_priv, reg); + if (ret < 0) + return ret; + + /* + * In our TAS2781 SPI mode, if read from other book (not book 0), + * or read from page number larger than 1 in book 0, one more byte + * read is needed, and first byte is a dummy byte, need to be ignored. + */ + if ((TASDEVICE_BOOK_ID(reg) > 0) || (TASDEVICE_PAGE_ID(reg) > 1)) { + unsigned char data[2]; + + ret = regmap_bulk_read(map, TASDEVICE_PAGE_REG(reg) | 1, + data, sizeof(data)); + *val = data[1]; + } else { + ret = regmap_read(map, TASDEVICE_PAGE_REG(reg) | 1, val); + } + if (ret < 0) + dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret); + + return ret; +} + +int tasdevice_spi_dev_write(struct tasdevice_priv *tas_priv, + unsigned int reg, + unsigned int value) +{ + struct regmap *map = tas_priv->regmap; + int ret; + + ret = tasdevice_spi_switch_book(tas_priv, reg); + if (ret < 0) + return ret; + + ret = regmap_write(map, TASDEVICE_PAGE_REG(reg), value); + if (ret < 0) + dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret); + + return ret; +} + +int tasdevice_spi_dev_bulk_write(struct tasdevice_priv *tas_priv, + unsigned int reg, + unsigned char *data, + unsigned int len) +{ + struct regmap *map = tas_priv->regmap; + int ret; + + ret = tasdevice_spi_switch_book(tas_priv, reg); + if (ret < 0) + return ret; + + ret = regmap_bulk_write(map, TASDEVICE_PAGE_REG(reg), data, len); + if (ret < 0) + dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret); + + return ret; +} + +int tasdevice_spi_dev_bulk_read(struct tasdevice_priv *tas_priv, + unsigned int reg, + unsigned char *data, + unsigned int len) +{ + struct regmap *map = tas_priv->regmap; + int ret; + + ret = tasdevice_spi_switch_book(tas_priv, reg); + if (ret < 0) + return ret; + + if (len > TASDEVICE_MAX_PAGE) + len = TASDEVICE_MAX_PAGE; + /* + * In our TAS2781 SPI mode, if read from other book (not book 0), + * or read from page number larger than 1 in book 0, one more byte + * read is needed, and first byte is a dummy byte, need to be ignored. + */ + if ((TASDEVICE_BOOK_ID(reg) > 0) || (TASDEVICE_PAGE_ID(reg) > 1)) { + unsigned char buf[TASDEVICE_MAX_PAGE+1]; + + ret = regmap_bulk_read(map, TASDEVICE_PAGE_REG(reg) | 1, buf, + len + 1); + memcpy(data, buf + 1, len); + } else { + ret = regmap_bulk_read(map, TASDEVICE_PAGE_REG(reg) | 1, data, + len); + } + if (ret < 0) + dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret); + + return ret; +} + +int tasdevice_spi_dev_update_bits(struct tasdevice_priv *tas_priv, + unsigned int reg, + unsigned int mask, + unsigned int value) +{ + struct regmap *map = tas_priv->regmap; + int ret, val; + + /* + * In our TAS2781 SPI mode, read/write was masked in last bit of + * address, it cause regmap_update_bits() not work as expected. + */ + ret = tasdevice_spi_dev_read(tas_priv, reg, &val); + if (ret < 0) { + dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret); + return ret; + } + ret = regmap_write(map, TASDEVICE_PAGE_REG(reg), + (val & ~mask) | (mask & value)); + if (ret < 0) + dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret); + + return ret; +} + +static void tas2781_spi_reset(struct tasdevice_priv *tas_dev) +{ + int ret; + + if (tas_dev->reset) { + gpiod_set_value_cansleep(tas_dev->reset, 0); + fsleep(800); + gpiod_set_value_cansleep(tas_dev->reset, 1); + } + for (int j = 0; j >= 0; j++) { + if (tas2781_pre_reset_table[j].reg == 0) + break; + if (tas2781_pre_reset_table[j].data[0] > 1) { + tasdevice_spi_dev_bulk_write(tas_dev, + tas2781_pre_reset_table[j].reg, + &tas2781_pre_reset_table[j].data[1], + tas2781_pre_reset_table[j].data[0]); + } else { + tasdevice_spi_dev_write(tas_dev, + tas2781_pre_reset_table[j].reg, + tas2781_pre_reset_table[j].data[1]); + } + } + ret = tasdevice_spi_dev_write(tas_dev, TAS2781_REG_SWRESET, + TAS2781_REG_SWRESET_RESET); + if (ret < 0) + dev_err(tas_dev->dev, "dev sw-reset fail, %d\n", ret); + fsleep(1000); + for (int j = 0; j >= 0; j++) { + if (tas2781_post_reset_table[j].reg == 0) + break; + if (tas2781_post_reset_table[j].data[0] > 1) { + tasdevice_spi_dev_bulk_write(tas_dev, + tas2781_post_reset_table[j].reg, + &tas2781_post_reset_table[j].data[1], + tas2781_post_reset_table[j].data[0]); + } else { + tasdevice_spi_dev_write(tas_dev, + tas2781_post_reset_table[j].reg, + tas2781_post_reset_table[j].data[1]); + } + } +} + +static int tascodec_spi_init(struct tasdevice_priv *tas_priv, + void *codec, struct module *module, + void (*cont)(const struct firmware *fw, void *context)) +{ + int ret; + + /* + * Codec Lock Hold to ensure that codec_probe and firmware parsing and + * loading do not simultaneously execute. + */ + guard(mutex)(&tas_priv->codec_lock); + + ret = scnprintf(tas_priv->rca_binaryname, + sizeof(tas_priv->rca_binaryname), "%sRCA%d.bin", + tas_priv->dev_name, tas_priv->index); + if (ret <= 0) { + dev_err(tas_priv->dev, "rca name err:0x%08x\n", ret); + return ret; + } + crc8_populate_msb(tas_priv->crc8_lkp_tbl, TASDEVICE_CRC8_POLYNOMIAL); + tas_priv->codec = codec; + ret = request_firmware_nowait(module, FW_ACTION_UEVENT, + tas_priv->rca_binaryname, tas_priv->dev, GFP_KERNEL, tas_priv, + cont); + if (ret) + dev_err(tas_priv->dev, "request_firmware_nowait err:0x%08x\n", + ret); + + return ret; +} + +static void tasdevice_spi_init(struct tasdevice_priv *tas_priv) +{ + tas_priv->cur_prog = -1; + tas_priv->cur_conf = -1; + + tas_priv->cur_book = -1; + tas_priv->cur_prog = -1; + tas_priv->cur_conf = -1; + + /* Store default registers address for calibration data. */ + tas_priv->cali_reg_array[0] = TASDEVICE_REG(0, 0x17, 0x74); + tas_priv->cali_reg_array[1] = TASDEVICE_REG(0, 0x18, 0x0c); + tas_priv->cali_reg_array[2] = TASDEVICE_REG(0, 0x18, 0x14); + tas_priv->cali_reg_array[3] = TASDEVICE_REG(0, 0x13, 0x70); + tas_priv->cali_reg_array[4] = TASDEVICE_REG(0, 0x18, 0x7c); + + mutex_init(&tas_priv->codec_lock); +} + +static int tasdevice_spi_amp_putvol(struct tasdevice_priv *tas_priv, + struct snd_ctl_elem_value *ucontrol, + struct soc_mixer_control *mc) +{ + unsigned int invert = mc->invert; + unsigned char mask; + int max = mc->max; + int val, ret; + + mask = rounddown_pow_of_two(max); + mask <<= mc->shift; + val = clamp(invert ? max - ucontrol->value.integer.value[0] : + ucontrol->value.integer.value[0], 0, max); + ret = tasdevice_spi_dev_update_bits(tas_priv, + mc->reg, mask, (unsigned int)(val << mc->shift)); + if (ret) + dev_err(tas_priv->dev, "set AMP vol error in dev %d\n", + tas_priv->index); + + return ret; +} + +static int tasdevice_spi_amp_getvol(struct tasdevice_priv *tas_priv, + struct snd_ctl_elem_value *ucontrol, + struct soc_mixer_control *mc) +{ + unsigned int invert = mc->invert; + unsigned char mask = 0; + int max = mc->max; + int ret, val; + + /* Read the primary device */ + ret = tasdevice_spi_dev_read(tas_priv, mc->reg, &val); + if (ret) { + dev_err(tas_priv->dev, "%s, get AMP vol error\n", __func__); + return ret; + } + + mask = rounddown_pow_of_two(max); + mask <<= mc->shift; + val = (val & mask) >> mc->shift; + val = clamp(invert ? max - val : val, 0, max); + ucontrol->value.integer.value[0] = val; + + return ret; +} + +static int tasdevice_spi_digital_putvol(struct tasdevice_priv *tas_priv, + struct snd_ctl_elem_value *ucontrol, + struct soc_mixer_control *mc) +{ + unsigned int invert = mc->invert; + int max = mc->max; + int val, ret; + + val = clamp(invert ? max - ucontrol->value.integer.value[0] : + ucontrol->value.integer.value[0], 0, max); + ret = tasdevice_spi_dev_write(tas_priv, mc->reg, (unsigned int)val); + if (ret) + dev_err(tas_priv->dev, "set digital vol err in dev %d\n", + tas_priv->index); + + return ret; +} + +static int tasdevice_spi_digital_getvol(struct tasdevice_priv *tas_priv, + struct snd_ctl_elem_value *ucontrol, + struct soc_mixer_control *mc) +{ + unsigned int invert = mc->invert; + int max = mc->max; + int ret, val; + + /* Read the primary device as the whole */ + ret = tasdevice_spi_dev_read(tas_priv, mc->reg, &val); + if (ret) { + dev_err(tas_priv->dev, "%s, get digital vol err\n", __func__); + return ret; + } + + val = clamp(invert ? max - val : val, 0, max); + ucontrol->value.integer.value[0] = val; + + return ret; +} + +static int tas2781_read_acpi(struct tas2781_hda *tas_hda, + const char *hid, + int id) +{ + struct tasdevice_priv *p = tas_hda->priv; + struct acpi_device *adev; + struct device *physdev; + u32 values[HDA_MAX_COMPONENTS]; + const char *property; + size_t nval; + int ret, i; + + adev = acpi_dev_get_first_match_dev(hid, NULL, -1); + if (!adev) { + dev_err(p->dev, "Failed to find ACPI device: %s\n", hid); + return -ENODEV; + } + + strscpy(p->dev_name, hid, sizeof(p->dev_name)); + tas_hda->dacpi = adev; + physdev = get_device(acpi_get_first_physical_node(adev)); + acpi_dev_put(adev); + + /* No side-effect to the playback even if subsystem_id is NULL */ + p->acpi_subsystem_id = acpi_get_subsystem_id(ACPI_HANDLE(physdev)); + + property = "ti,dev-index"; + ret = device_property_count_u32(physdev, property); + if (ret <= 0 || ret > ARRAY_SIZE(values)) { + ret = -EINVAL; + goto err; + } + nval = ret; + + ret = device_property_read_u32_array(physdev, property, values, nval); + if (ret) + goto err; + + p->index = U8_MAX; + for (i = 0; i < nval; i++) { + if (values[i] == id) { + p->index = i; + break; + } + } + if (p->index == U8_MAX) { + dev_dbg(p->dev, "No index found in %s\n", property); + ret = -ENODEV; + goto err; + } + + if (p->index == 0) { + /* All of amps share same RESET pin. */ + p->reset = devm_gpiod_get_index_optional(physdev, "reset", + p->index, GPIOD_OUT_LOW); + if (IS_ERR(p->reset)) { + dev_err_probe(p->dev, ret, "Failed on reset GPIO\n"); + goto err; + } + } + put_device(physdev); + + return 0; +err: + dev_err(p->dev, "read acpi error, ret: %d\n", ret); + put_device(physdev); + acpi_dev_put(adev); + + return ret; +} + +static void tas2781_hda_playback_hook(struct device *dev, int action) +{ + struct tas2781_hda *tas_hda = dev_get_drvdata(dev); + + if (action == HDA_GEN_PCM_ACT_OPEN) { + pm_runtime_get_sync(dev); + guard(mutex)(&tas_hda->priv->codec_lock); + tasdevice_spi_tuning_switch(tas_hda->priv, 0); + } else if (action == HDA_GEN_PCM_ACT_CLOSE) { + guard(mutex)(&tas_hda->priv->codec_lock); + tasdevice_spi_tuning_switch(tas_hda->priv, 1); + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + } +} + +static int tasdevice_info_profile(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = tas_priv->rcabin.ncfgs - 1; + + return 0; +} + +static int tasdevice_get_profile_id(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + + ucontrol->value.integer.value[0] = tas_priv->rcabin.profile_cfg_id; + + return 0; +} + +static int tasdevice_set_profile_id(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + int max = tas_priv->rcabin.ncfgs - 1; + int val; + + val = clamp(ucontrol->value.integer.value[0], 0, max); + if (tas_priv->rcabin.profile_cfg_id != val) { + tas_priv->rcabin.profile_cfg_id = val; + return 1; + } + + return 0; +} + +static int tasdevice_info_programs(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = tas_priv->fmw->nr_programs - 1; + + return 0; +} + +static int tasdevice_info_config(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = tas_priv->fmw->nr_configurations - 1; + + return 0; +} + +static int tasdevice_program_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + + ucontrol->value.integer.value[0] = tas_priv->cur_prog; + + return 0; +} + +static int tasdevice_program_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + int nr_program = ucontrol->value.integer.value[0]; + int max = tas_priv->fmw->nr_programs - 1; + int val; + + val = clamp(nr_program, 0, max); + + if (tas_priv->cur_prog != val) { + tas_priv->cur_prog = val; + return 1; + } + + return 0; +} + +static int tasdevice_config_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + + ucontrol->value.integer.value[0] = tas_priv->cur_conf; + + return 0; +} + +static int tasdevice_config_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + int max = tas_priv->fmw->nr_configurations - 1; + int val; + + val = clamp(ucontrol->value.integer.value[0], 0, max); + + if (tas_priv->cur_conf != val) { + tas_priv->cur_conf = val; + return 1; + } + + return 0; +} + +/* + * tas2781_digital_getvol - get the volum control + * @kcontrol: control pointer + * @ucontrol: User data + * + * Customer Kcontrol for tas2781 is primarily for regmap booking, paging + * depends on internal regmap mechanism. + * tas2781 contains book and page two-level register map, especially + * book switching will set the register BXXP00R7F, after switching to the + * correct book, then leverage the mechanism for paging to access the + * register. + * + * Return 0 if succeeded. + */ +static int tas2781_digital_getvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + + return tasdevice_spi_digital_getvol(tas_priv, ucontrol, mc); +} + +static int tas2781_amp_getvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + + return tasdevice_spi_amp_getvol(tas_priv, ucontrol, mc); +} + +static int tas2781_digital_putvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + + /* The check of the given value is in tasdevice_digital_putvol. */ + return tasdevice_spi_digital_putvol(tas_priv, ucontrol, mc); +} + +static int tas2781_amp_putvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + + /* The check of the given value is in tasdevice_amp_putvol. */ + return tasdevice_spi_amp_putvol(tas_priv, ucontrol, mc); +} + +static int tas2781_force_fwload_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + + ucontrol->value.integer.value[0] = (int)tas_priv->force_fwload_status; + dev_dbg(tas_priv->dev, "%s : Force FWload %s\n", __func__, + str_on_off(tas_priv->force_fwload_status)); + + return 0; +} + +static int tas2781_force_fwload_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + bool change, val = (bool)ucontrol->value.integer.value[0]; + + if (tas_priv->force_fwload_status == val) { + change = false; + } else { + change = true; + tas_priv->force_fwload_status = val; + } + dev_dbg(tas_priv->dev, "%s : Force FWload %s\n", __func__, + str_on_off(tas_priv->force_fwload_status)); + + return change; +} + +static const struct snd_kcontrol_new tas2781_snd_controls[] = { + ACARD_SINGLE_RANGE_EXT_TLV("Speaker Analog Gain 0", TAS2781_AMP_LEVEL, + 1, 0, 20, 0, tas2781_amp_getvol, + tas2781_amp_putvol, amp_vol_tlv), + ACARD_SINGLE_RANGE_EXT_TLV("Speaker Digital Gain 0", TAS2781_DVC_LVL, + 0, 0, 200, 1, tas2781_digital_getvol, + tas2781_digital_putvol, dvc_tlv), + ACARD_SINGLE_BOOL_EXT("Speaker Force Firmware Load 0", 0, + tas2781_force_fwload_get, tas2781_force_fwload_put), + ACARD_SINGLE_RANGE_EXT_TLV("Speaker Analog Gain 1", TAS2781_AMP_LEVEL, + 1, 0, 20, 0, tas2781_amp_getvol, + tas2781_amp_putvol, amp_vol_tlv), + ACARD_SINGLE_RANGE_EXT_TLV("Speaker Digital Gain 1", TAS2781_DVC_LVL, + 0, 0, 200, 1, tas2781_digital_getvol, + tas2781_digital_putvol, dvc_tlv), + ACARD_SINGLE_BOOL_EXT("Speaker Force Firmware Load 1", 0, + tas2781_force_fwload_get, tas2781_force_fwload_put), +}; + +static const struct snd_kcontrol_new tas2781_prof_ctrl[] = { +{ + .name = "Speaker Profile Id - 0", + .iface = SNDRV_CTL_ELEM_IFACE_CARD, + .info = tasdevice_info_profile, + .get = tasdevice_get_profile_id, + .put = tasdevice_set_profile_id, +}, +{ + .name = "Speaker Profile Id - 1", + .iface = SNDRV_CTL_ELEM_IFACE_CARD, + .info = tasdevice_info_profile, + .get = tasdevice_get_profile_id, + .put = tasdevice_set_profile_id, +}, +}; +static const struct snd_kcontrol_new tas2781_dsp_prog_ctrl[] = { +{ + .name = "Speaker Program Id 0", + .iface = SNDRV_CTL_ELEM_IFACE_CARD, + .info = tasdevice_info_programs, + .get = tasdevice_program_get, + .put = tasdevice_program_put, +}, +{ + .name = "Speaker Program Id 1", + .iface = SNDRV_CTL_ELEM_IFACE_CARD, + .info = tasdevice_info_programs, + .get = tasdevice_program_get, + .put = tasdevice_program_put, +}, +}; + +static const struct snd_kcontrol_new tas2781_dsp_conf_ctrl[] = { +{ + .name = "Speaker Config Id 0", + .iface = SNDRV_CTL_ELEM_IFACE_CARD, + .info = tasdevice_info_config, + .get = tasdevice_config_get, + .put = tasdevice_config_put, +}, +{ + .name = "Speaker Config Id 1", + .iface = SNDRV_CTL_ELEM_IFACE_CARD, + .info = tasdevice_info_config, + .get = tasdevice_config_get, + .put = tasdevice_config_put, +}, +}; + +static void tas2781_apply_calib(struct tasdevice_priv *tas_priv) +{ + int j, rc; + + /* + * If no calibration data exist in tasdevice_priv *tas_priv, + * calibration apply will be ignored, and use default values + * in firmware binary, which was loaded during firmware download. + */ + if (tas_priv->cali_data[0] == 0) + return; + /* + * Calibration data was saved in tasdevice_priv *tas_priv as: + * unsigned int cali_data[CALIB_MAX]; + * and every data (in 4 bytes) will be saved in register which in + * book 0, and page number in page_array[], offset was saved in + * rgno_array[]. + */ + for (j = 0; j < CALIB_MAX; j++) { + rc = tasdevice_spi_dev_bulk_write(tas_priv, + tas_priv->cali_reg_array[j], + (unsigned char *)&tas_priv->cali_data[j], 4); + if (rc < 0) + dev_err(tas_priv->dev, + "chn %d calib %d bulk_wr err = %d\n", + tas_priv->index, j, rc); + } +} + +/* + * Update the calibration data, including speaker impedance, f0, etc, + * into algo. Calibrate data is done by manufacturer in the factory. + * These data are used by Algo for calculating the speaker temperature, + * speaker membrane excursion and f0 in real time during playback. + * Calibration data format in EFI is V2, since 2024. + */ +static int tas2781_save_calibration(struct tasdevice_priv *tas_priv) +{ + /* + * GUID was used for data access in BIOS, it was provided by board + * manufactory, like HP: "{02f9af02-7734-4233-b43d-93fe5aa35db3}" + */ + efi_guid_t efi_guid = + EFI_GUID(0x02f9af02, 0x7734, 0x4233, + 0xb4, 0x3d, 0x93, 0xfe, 0x5a, 0xa3, 0x5d, 0xb3); + static efi_char16_t efi_name[] = TASDEVICE_CALIBRATION_DATA_NAME; + unsigned char data[TASDEVICE_CALIBRATION_DATA_SIZE], *buf; + unsigned int attr, crc, offset, *tmp_val; + struct tm *tm = &tas_priv->tm; + unsigned long total_sz = 0; + efi_status_t status; + + tas_priv->cali_data[0] = 0; + status = efi.get_variable(efi_name, &efi_guid, &attr, &total_sz, data); + if (status == EFI_BUFFER_TOO_SMALL) { + if (total_sz > TASDEVICE_CALIBRATION_DATA_SIZE) + return -ENOMEM; + /* Get variable contents into buffer */ + status = efi.get_variable(efi_name, &efi_guid, &attr, + &total_sz, data); + } + if (status != EFI_SUCCESS) + return -EINVAL; + + tmp_val = (unsigned int *)data; + if (tmp_val[0] == 2781) { + /* + * New features were added in calibrated Data V3: + * 1. Added calibration registers address define in + * a node, marked as Device id == 0x80. + * New features were added in calibrated Data V2: + * 1. Added some the fields to store the link_id and + * uniqie_id for multi-link solutions + * 2. Support flexible number of devices instead of + * fixed one in V1. + * Layout of calibrated data V2 in UEFI(total 256 bytes): + * ChipID (2781, 4 bytes) + * Device-Sum (4 bytes) + * TimeStamp of Calibration (4 bytes) + * for (i = 0; i < Device-Sum; i++) { + * Device #i index_info () { + * SDW link id (2bytes) + * SDW unique_id (2bytes) + * } // if Device number is 0x80, mean it's + * calibration registers address. + * Calibrated Data of Device #i (20 bytes) + * } + * CRC (4 bytes) + * Reserved (the rest) + */ + crc = crc32(~0, data, (3 + tmp_val[1] * 6) * 4) ^ ~0; + + if (crc != tmp_val[3 + tmp_val[1] * 6]) + return 0; + + time64_to_tm(tmp_val[2], 0, tm); + for (int j = 0; j < tmp_val[1]; j++) { + offset = j * 6 + 3; + if (tmp_val[offset] == tas_priv->index) { + for (int i = 0; i < CALIB_MAX; i++) + tas_priv->cali_data[i] = + tmp_val[offset + i + 1]; + } else if (tmp_val[offset] == + TASDEVICE_CALIBRATION_REG_ADDRESS) { + for (int i = 0; i < CALIB_MAX; i++) { + buf = &data[(offset + i + 1) * 4]; + tas_priv->cali_reg_array[i] = + TASDEVICE_REG(buf[1], buf[2], + buf[3]); + } + } + tas_priv->apply_calibration(tas_priv); + } + } else { + /* + * Calibration data is in V1 format. + * struct cali_data { + * char cali_data[20]; + * } + * + * struct { + * struct cali_data cali_data[4]; + * int TimeStamp of Calibration (4 bytes) + * int CRC (4 bytes) + * } ueft; + */ + crc = crc32(~0, data, 84) ^ ~0; + if (crc == tmp_val[21]) { + time64_to_tm(tmp_val[20], 0, tm); + for (int i = 0; i < CALIB_MAX; i++) + tas_priv->cali_data[i] = + tmp_val[tas_priv->index * 5 + i]; + tas_priv->apply_calibration(tas_priv); + } + } + + return 0; +} + +static void tas2781_hda_remove_controls(struct tas2781_hda *tas_hda) +{ + struct hda_codec *codec = tas_hda->priv->codec; + + snd_ctl_remove(codec->card, tas_hda->dsp_prog_ctl); + + snd_ctl_remove(codec->card, tas_hda->dsp_conf_ctl); + + for (int i = ARRAY_SIZE(tas_hda->snd_ctls) - 1; i >= 0; i--) + snd_ctl_remove(codec->card, tas_hda->snd_ctls[i]); + + snd_ctl_remove(codec->card, tas_hda->prof_ctl); +} + +static void tasdev_fw_ready(const struct firmware *fmw, void *context) +{ + struct tasdevice_priv *tas_priv = context; + struct tas2781_hda *tas_hda = dev_get_drvdata(tas_priv->dev); + struct hda_codec *codec = tas_priv->codec; + int i, j, ret; + + pm_runtime_get_sync(tas_priv->dev); + guard(mutex)(&tas_priv->codec_lock); + + ret = tasdevice_spi_rca_parser(tas_priv, fmw); + if (ret) + goto out; + + /* Add control one time only. */ + tas_hda->prof_ctl = snd_ctl_new1(&tas2781_prof_ctrl[tas_priv->index], + tas_priv); + ret = snd_ctl_add(codec->card, tas_hda->prof_ctl); + if (ret) { + dev_err(tas_priv->dev, "Failed to add KControl %s = %d\n", + tas2781_prof_ctrl[tas_priv->index].name, ret); + goto out; + } + j = tas_priv->index * ARRAY_SIZE(tas2781_snd_controls) / 2; + for (i = 0; i < 3; i++) { + tas_hda->snd_ctls[i] = snd_ctl_new1(&tas2781_snd_controls[i+j], + tas_priv); + ret = snd_ctl_add(codec->card, tas_hda->snd_ctls[i]); + if (ret) { + dev_err(tas_priv->dev, + "Failed to add KControl %s = %d\n", + tas2781_snd_controls[i+tas_priv->index*3].name, + ret); + goto out; + } + } + + tasdevice_spi_dsp_remove(tas_priv); + + tas_priv->fw_state = TASDEVICE_DSP_FW_PENDING; + scnprintf(tas_priv->coef_binaryname, 64, "TAS2XXX%08X-%01d.bin", + codec->core.subsystem_id, tas_priv->index); + ret = tasdevice_spi_dsp_parser(tas_priv); + if (ret) { + dev_err(tas_priv->dev, "dspfw load %s error\n", + tas_priv->coef_binaryname); + tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; + goto out; + } + + /* Add control one time only. */ + tas_hda->dsp_prog_ctl = + snd_ctl_new1(&tas2781_dsp_prog_ctrl[tas_priv->index], + tas_priv); + ret = snd_ctl_add(codec->card, tas_hda->dsp_prog_ctl); + if (ret) { + dev_err(tas_priv->dev, + "Failed to add KControl %s = %d\n", + tas2781_dsp_prog_ctrl[tas_priv->index].name, ret); + goto out; + } + + tas_hda->dsp_conf_ctl = + snd_ctl_new1(&tas2781_dsp_conf_ctrl[tas_priv->index], + tas_priv); + ret = snd_ctl_add(codec->card, tas_hda->dsp_conf_ctl); + if (ret) { + dev_err(tas_priv->dev, "Failed to add KControl %s = %d\n", + tas2781_dsp_conf_ctrl[tas_priv->index].name, ret); + goto out; + } + + tas_priv->fw_state = TASDEVICE_DSP_FW_ALL_OK; + tasdevice_spi_prmg_load(tas_priv, 0); + if (tas_priv->fmw->nr_programs > 0) + tas_priv->cur_prog = 0; + if (tas_priv->fmw->nr_configurations > 0) + tas_priv->cur_conf = 0; + + /* + * If calibrated data occurs error, dsp will still works with default + * calibrated data inside algo. + */ + tas_priv->save_calibration(tas_priv); + +out: + if (fmw) + release_firmware(fmw); + pm_runtime_mark_last_busy(tas_hda->priv->dev); + pm_runtime_put_autosuspend(tas_hda->priv->dev); +} + +static int tas2781_hda_bind(struct device *dev, struct device *master, + void *master_data) +{ + struct tas2781_hda *tas_hda = dev_get_drvdata(dev); + struct hda_component_parent *parent = master_data; + struct hda_component *comp; + struct hda_codec *codec; + int ret; + + comp = hda_component_from_index(parent, tas_hda->priv->index); + if (!comp) + return -EINVAL; + + if (comp->dev) + return -EBUSY; + + codec = parent->codec; + + pm_runtime_get_sync(dev); + + comp->dev = dev; + + strscpy(comp->name, dev_name(dev), sizeof(comp->name)); + + ret = tascodec_spi_init(tas_hda->priv, codec, THIS_MODULE, + tasdev_fw_ready); + if (!ret) + comp->playback_hook = tas2781_hda_playback_hook; + + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + + return ret; +} + +static void tas2781_hda_unbind(struct device *dev, struct device *master, + void *master_data) +{ + struct tas2781_hda *tas_hda = dev_get_drvdata(dev); + struct hda_component_parent *parent = master_data; + struct hda_component *comp; + + comp = hda_component_from_index(parent, tas_hda->priv->index); + if (comp && (comp->dev == dev)) { + comp->dev = NULL; + memset(comp->name, 0, sizeof(comp->name)); + comp->playback_hook = NULL; + } + + tas2781_hda_remove_controls(tas_hda); + + tasdevice_spi_config_info_remove(tas_hda->priv); + tasdevice_spi_dsp_remove(tas_hda->priv); + + tas_hda->priv->fw_state = TASDEVICE_DSP_FW_PENDING; +} + +static const struct component_ops tas2781_hda_comp_ops = { + .bind = tas2781_hda_bind, + .unbind = tas2781_hda_unbind, +}; + +static void tas2781_hda_remove(struct device *dev) +{ + struct tas2781_hda *tas_hda = dev_get_drvdata(dev); + + component_del(tas_hda->priv->dev, &tas2781_hda_comp_ops); + + pm_runtime_get_sync(tas_hda->priv->dev); + pm_runtime_disable(tas_hda->priv->dev); + + pm_runtime_put_noidle(tas_hda->priv->dev); + + mutex_destroy(&tas_hda->priv->codec_lock); +} + +static int tas2781_hda_spi_probe(struct spi_device *spi) +{ + struct tasdevice_priv *tas_priv; + struct tas2781_hda *tas_hda; + const char *device_name; + int ret = 0; + + tas_hda = devm_kzalloc(&spi->dev, sizeof(*tas_hda), GFP_KERNEL); + if (!tas_hda) + return -ENOMEM; + + spi->max_speed_hz = TAS2781_SPI_MAX_FREQ; + + tas_priv = devm_kzalloc(&spi->dev, sizeof(*tas_priv), GFP_KERNEL); + if (!tas_priv) + goto err; + tas_priv->dev = &spi->dev; + tas_hda->priv = tas_priv; + tas_priv->regmap = devm_regmap_init_spi(spi, &tasdevice_regmap); + if (IS_ERR(tas_priv->regmap)) { + ret = PTR_ERR(tas_priv->regmap); + dev_err(tas_priv->dev, "Failed to allocate regmap: %d\n", + ret); + goto err; + } + if (strstr(dev_name(&spi->dev), "TXNW2781")) { + device_name = "TXNW2781"; + tas_priv->save_calibration = tas2781_save_calibration; + tas_priv->apply_calibration = tas2781_apply_calib; + } else { + goto err; + } + + tas_priv->irq = spi->irq; + dev_set_drvdata(&spi->dev, tas_hda); + ret = tas2781_read_acpi(tas_hda, device_name, + spi_get_chipselect(spi, 0)); + if (ret) + return dev_err_probe(tas_priv->dev, ret, + "Platform not supported\n"); + + tasdevice_spi_init(tas_priv); + + pm_runtime_set_autosuspend_delay(tas_priv->dev, 3000); + pm_runtime_use_autosuspend(tas_priv->dev); + pm_runtime_mark_last_busy(tas_priv->dev); + pm_runtime_set_active(tas_priv->dev); + pm_runtime_get_noresume(tas_priv->dev); + pm_runtime_enable(tas_priv->dev); + + pm_runtime_put_autosuspend(tas_priv->dev); + + tas2781_spi_reset(tas_priv); + + ret = component_add(tas_priv->dev, &tas2781_hda_comp_ops); + if (ret) { + dev_err(tas_priv->dev, "Register component fail: %d\n", ret); + pm_runtime_disable(tas_priv->dev); + } + +err: + if (ret) + tas2781_hda_remove(&spi->dev); + + return ret; +} + +static void tas2781_hda_spi_remove(struct spi_device *spi) +{ + tas2781_hda_remove(&spi->dev); +} + +static int tas2781_runtime_suspend(struct device *dev) +{ + struct tas2781_hda *tas_hda = dev_get_drvdata(dev); + + guard(mutex)(&tas_hda->priv->codec_lock); + + tasdevice_spi_tuning_switch(tas_hda->priv, 1); + + tas_hda->priv->cur_book = -1; + tas_hda->priv->cur_conf = -1; + + return 0; +} + +static int tas2781_runtime_resume(struct device *dev) +{ + struct tas2781_hda *tas_hda = dev_get_drvdata(dev); + + guard(mutex)(&tas_hda->priv->codec_lock); + + tasdevice_spi_tuning_switch(tas_hda->priv, 0); + + return 0; +} + +static int tas2781_system_suspend(struct device *dev) +{ + struct tas2781_hda *tas_hda = dev_get_drvdata(dev); + int ret; + + ret = pm_runtime_force_suspend(dev); + if (ret) + return ret; + + /* Shutdown chip before system suspend */ + tasdevice_spi_tuning_switch(tas_hda->priv, 1); + + /* + * Reset GPIO may be shared, so cannot reset here. + * However beyond this point, amps may be powered down. + */ + return 0; +} + +static int tas2781_system_resume(struct device *dev) +{ + struct tas2781_hda *tas_hda = dev_get_drvdata(dev); + int ret, val; + + ret = pm_runtime_force_resume(dev); + if (ret) + return ret; + + guard(mutex)(&tas_hda->priv->codec_lock); + + ret = tasdevice_spi_dev_read(tas_hda->priv, TAS2781_REG_CLK_CONFIG, + &val); + if (ret < 0) + return ret; + + if (val == TAS2781_REG_CLK_CONFIG_RESET) { + tas_hda->priv->cur_book = -1; + tas_hda->priv->cur_conf = -1; + tas_hda->priv->cur_prog = -1; + + tasdevice_spi_prmg_load(tas_hda->priv, 0); + tas_hda->priv->apply_calibration(tas_hda->priv); + + if (tas_hda->priv->playback_started) + tasdevice_spi_tuning_switch(tas_hda->priv, 0); + } + + return 0; +} + +static const struct dev_pm_ops tas2781_hda_pm_ops = { + RUNTIME_PM_OPS(tas2781_runtime_suspend, tas2781_runtime_resume, NULL) + SYSTEM_SLEEP_PM_OPS(tas2781_system_suspend, tas2781_system_resume) +}; + +static const struct spi_device_id tas2781_hda_spi_id[] = { + { "tas2781-hda", }, + {} +}; + +static const struct acpi_device_id tas2781_acpi_hda_match[] = { + {"TXNW2781", }, + {} +}; +MODULE_DEVICE_TABLE(acpi, tas2781_acpi_hda_match); + +static struct spi_driver tas2781_hda_spi_driver = { + .driver = { + .name = "tas2781-hda", + .acpi_match_table = tas2781_acpi_hda_match, + .pm = &tas2781_hda_pm_ops, + }, + .id_table = tas2781_hda_spi_id, + .probe = tas2781_hda_spi_probe, + .remove = tas2781_hda_spi_remove, +}; +module_spi_driver(tas2781_hda_spi_driver); + +MODULE_DESCRIPTION("TAS2781 HDA SPI Driver"); +MODULE_AUTHOR("Baojun, Xu, <baojun.xug(a)ti.com>"); +MODULE_LICENSE("GPL"); diff --git a/sound/pci/hda/tas2781_spi_fwlib.c b/sound/pci/hda/tas2781_spi_fwlib.c new file mode 100644 index 000000000000..9e58e8d981e3 --- /dev/null +++ b/sound/pci/hda/tas2781_spi_fwlib.c @@ -0,0 +1,2114 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// TAS2781 HDA SPI driver +// +// Copyright 2024 Texas Instruments, Inc. +// +// Author: Baojun Xu <baojun.xu(a)ti.com> + +#include <asm/unaligned.h> +#include <linux/crc8.h> +#include <linux/firmware.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/tas2781-dsp.h> +#include <sound/tlv.h> + +#include "tas2781-spi.h" + +#define OFFSET_ERROR_BIT BIT(31) + +#define ERROR_PRAM_CRCCHK 0x0000000 +#define ERROR_YRAM_CRCCHK 0x0000001 +#define PPC_DRIVER_CRCCHK 0x00000200 + +#define TAS2781_SA_COEFF_SWAP_REG TASDEVICE_REG(0, 0x35, 0x2c) +#define TAS2781_YRAM_BOOK1 140 +#define TAS2781_YRAM1_PAGE 42 +#define TAS2781_YRAM1_START_REG 88 + +#define TAS2781_YRAM2_START_PAGE 43 +#define TAS2781_YRAM2_END_PAGE 49 +#define TAS2781_YRAM2_START_REG 8 +#define TAS2781_YRAM2_END_REG 127 + +#define TAS2781_YRAM3_PAGE 50 +#define TAS2781_YRAM3_START_REG 8 +#define TAS2781_YRAM3_END_REG 27 + +/* should not include B0_P53_R44-R47 */ +#define TAS2781_YRAM_BOOK2 0 +#define TAS2781_YRAM4_START_PAGE 50 +#define TAS2781_YRAM4_END_PAGE 60 + +#define TAS2781_YRAM5_PAGE 61 +#define TAS2781_YRAM5_START_REG TAS2781_YRAM3_START_REG +#define TAS2781_YRAM5_END_REG TAS2781_YRAM3_END_REG + +#define TASDEVICE_MAXPROGRAM_NUM_KERNEL 5 +#define TASDEVICE_MAXCONFIG_NUM_KERNEL_MULTIPLE_AMPS 64 +#define TASDEVICE_MAXCONFIG_NUM_KERNEL 10 +#define MAIN_ALL_DEVICES_1X 0x01 +#define MAIN_DEVICE_A_1X 0x02 +#define MAIN_DEVICE_B_1X 0x03 +#define MAIN_DEVICE_C_1X 0x04 +#define MAIN_DEVICE_D_1X 0x05 +#define COEFF_DEVICE_A_1X 0x12 +#define COEFF_DEVICE_B_1X 0x13 +#define COEFF_DEVICE_C_1X 0x14 +#define COEFF_DEVICE_D_1X 0x15 +#define PRE_DEVICE_A_1X 0x22 +#define PRE_DEVICE_B_1X 0x23 +#define PRE_DEVICE_C_1X 0x24 +#define PRE_DEVICE_D_1X 0x25 +#define PRE_SOFTWARE_RESET_DEVICE_A 0x41 +#define PRE_SOFTWARE_RESET_DEVICE_B 0x42 +#define PRE_SOFTWARE_RESET_DEVICE_C 0x43 +#define PRE_SOFTWARE_RESET_DEVICE_D 0x44 +#define POST_SOFTWARE_RESET_DEVICE_A 0x45 +#define POST_SOFTWARE_RESET_DEVICE_B 0x46 +#define POST_SOFTWARE_RESET_DEVICE_C 0x47 +#define POST_SOFTWARE_RESET_DEVICE_D 0x48 + +struct tas_crc { + unsigned char offset; + unsigned char len; +}; + +struct blktyp_devidx_map { + unsigned char blktyp; + unsigned char dev_idx; +}; + +/* fixed m68k compiling issue: mapping table can save code field */ +static const struct blktyp_devidx_map ppc3_tas2781_mapping_table[] = { + { MAIN_ALL_DEVICES_1X, 0x80 }, + { MAIN_DEVICE_A_1X, 0x81 }, + { COEFF_DEVICE_A_1X, 0x81 }, + { PRE_DEVICE_A_1X, 0x81 }, + { PRE_SOFTWARE_RESET_DEVICE_A, 0xC1 }, + { POST_SOFTWARE_RESET_DEVICE_A, 0xC1 }, + { MAIN_DEVICE_B_1X, 0x82 }, + { COEFF_DEVICE_B_1X, 0x82 }, + { PRE_DEVICE_B_1X, 0x82 }, + { PRE_SOFTWARE_RESET_DEVICE_B, 0xC2 }, + { POST_SOFTWARE_RESET_DEVICE_B, 0xC2 }, + { MAIN_DEVICE_C_1X, 0x83 }, + { COEFF_DEVICE_C_1X, 0x83 }, + { PRE_DEVICE_C_1X, 0x83 }, + { PRE_SOFTWARE_RESET_DEVICE_C, 0xC3 }, + { POST_SOFTWARE_RESET_DEVICE_C, 0xC3 }, + { MAIN_DEVICE_D_1X, 0x84 }, + { COEFF_DEVICE_D_1X, 0x84 }, + { PRE_DEVICE_D_1X, 0x84 }, + { PRE_SOFTWARE_RESET_DEVICE_D, 0xC4 }, + { POST_SOFTWARE_RESET_DEVICE_D, 0xC4 }, +}; + +static const struct blktyp_devidx_map ppc3_mapping_table[] = { + { MAIN_ALL_DEVICES_1X, 0x80 }, + { MAIN_DEVICE_A_1X, 0x81 }, + { COEFF_DEVICE_A_1X, 0xC1 }, + { PRE_DEVICE_A_1X, 0xC1 }, + { MAIN_DEVICE_B_1X, 0x82 }, + { COEFF_DEVICE_B_1X, 0xC2 }, + { PRE_DEVICE_B_1X, 0xC2 }, + { MAIN_DEVICE_C_1X, 0x83 }, + { COEFF_DEVICE_C_1X, 0xC3 }, + { PRE_DEVICE_C_1X, 0xC3 }, + { MAIN_DEVICE_D_1X, 0x84 }, + { COEFF_DEVICE_D_1X, 0xC4 }, + { PRE_DEVICE_D_1X, 0xC4 }, +}; + +static const struct blktyp_devidx_map non_ppc3_mapping_table[] = { + { MAIN_ALL_DEVICES, 0x80 }, + { MAIN_DEVICE_A, 0x81 }, + { COEFF_DEVICE_A, 0xC1 }, + { PRE_DEVICE_A, 0xC1 }, + { MAIN_DEVICE_B, 0x82 }, + { COEFF_DEVICE_B, 0xC2 }, + { PRE_DEVICE_B, 0xC2 }, + { MAIN_DEVICE_C, 0x83 }, + { COEFF_DEVICE_C, 0xC3 }, + { PRE_DEVICE_C, 0xC3 }, + { MAIN_DEVICE_D, 0x84 }, + { COEFF_DEVICE_D, 0xC4 }, + { PRE_DEVICE_D, 0xC4 }, +}; +/* + * Device support different configurations for different scene, + * like voice, music, calibration, was write in regbin file. + * Will be stored into tas_priv after regbin was loaded. + */ +static struct tasdevice_config_info *tasdevice_add_config( + struct tasdevice_priv *tas_priv, unsigned char *config_data, + unsigned int config_size, int *status) +{ + struct tasdevice_config_info *cfg_info; + struct tasdev_blk_data **bk_da; + unsigned int config_offset = 0; + unsigned int i; + + /* + * In most projects are many audio cases, such as music, handfree, + * receiver, games, audio-to-haptics, PMIC record, bypass mode, + * portrait, landscape, etc. Even in multiple audios, one or + * two of the chips will work for the special case, such as + * ultrasonic application. In order to support these variable-numbers + * of audio cases, flexible configs have been introduced in the + * DSP firmware. + */ + cfg_info = kzalloc(sizeof(*cfg_info), GFP_KERNEL); + if (!cfg_info) { + *status = -ENOMEM; + return NULL; + } + + if (tas_priv->rcabin.fw_hdr.binary_version_num >= 0x105) { + if ((config_offset + 64) > config_size) { + *status = -EINVAL; + dev_err(tas_priv->dev, "add conf: Out of boundary\n"); + goto config_err; + } + config_offset += 64; + } + + if ((config_offset + 4) > config_size) { + *status = -EINVAL; + dev_err(tas_priv->dev, "add config: Out of boundary\n"); + goto config_err; + } + + /* + * convert data[offset], data[offset + 1], data[offset + 2] and + * data[offset + 3] into host + */ + cfg_info->nblocks = get_unaligned_be32(&config_data[config_offset]); + config_offset += 4; + + /* + * Several kinds of dsp/algorithm firmwares can run on tas2781, + * the number and size of blk are not fixed and different among + * these firmwares. + */ + bk_da = cfg_info->blk_data = kcalloc(cfg_info->nblocks, + sizeof(*bk_da), GFP_KERNEL); + if (!bk_da) { + *status = -ENOMEM; + goto config_err; + } + cfg_info->real_nblocks = 0; + for (i = 0; i < cfg_info->nblocks; i++) { + if (config_offset + 12 > config_size) { + *status = -EINVAL; + dev_err(tas_priv->dev, + "%s: Out of boundary: i = %d nblocks = %u!\n", + __func__, i, cfg_info->nblocks); + goto block_err; + } + bk_da[i] = kzalloc(sizeof(*bk_da[i]), GFP_KERNEL); + if (!bk_da[i]) { + *status = -ENOMEM; + goto block_err; + } + + bk_da[i]->dev_idx = config_data[config_offset]; + config_offset++; + + bk_da[i]->block_type = config_data[config_offset]; + config_offset++; + + bk_da[i]->yram_checksum = + get_unaligned_be16(&config_data[config_offset]); + config_offset += 2; + bk_da[i]->block_size = + get_unaligned_be32(&config_data[config_offset]); + config_offset += 4; + + bk_da[i]->n_subblks = + get_unaligned_be32(&config_data[config_offset]); + + config_offset += 4; + + if (config_offset + bk_da[i]->block_size > config_size) { + *status = -EINVAL; + dev_err(tas_priv->dev, + "%s: Out of boundary: i = %d blks = %u!\n", + __func__, i, cfg_info->nblocks); + goto block_err; + } + /* instead of kzalloc+memcpy */ + bk_da[i]->regdata = kmemdup(&config_data[config_offset], + bk_da[i]->block_size, GFP_KERNEL); + if (!bk_da[i]->regdata) { + *status = -ENOMEM; + i++; + goto block_err; + } + + config_offset += bk_da[i]->block_size; + cfg_info->real_nblocks += 1; + } + + return cfg_info; +block_err: + for (int j = 0; j < i; j++) + kfree(bk_da[j]); + kfree(bk_da); +config_err: + kfree(cfg_info); + return NULL; +} + +/* Regbin file parser function. */ +int tasdevice_spi_rca_parser(void *context, const struct firmware *fmw) +{ + struct tasdevice_priv *tas_priv = context; + struct tasdevice_config_info **cfg_info; + struct tasdevice_rca_hdr *fw_hdr; + struct tasdevice_rca *rca; + unsigned int total_config_sz = 0; + int offset = 0, ret = 0, i; + unsigned char *buf; + + rca = &tas_priv->rcabin; + fw_hdr = &rca->fw_hdr; + if (!fmw || !fmw->data) { + dev_err(tas_priv->dev, "Failed to read %s\n", + tas_priv->rca_binaryname); + tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; + return -EINVAL; + } + buf = (unsigned char *)fmw->data; + fw_hdr->img_sz = get_unaligned_be32(&buf[offset]); + offset += 4; + if (fw_hdr->img_sz != fmw->size) { + dev_err(tas_priv->dev, + "File size not match, %d %u", (int)fmw->size, + fw_hdr->img_sz); + tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; + return -EINVAL; + } + + fw_hdr->checksum = get_unaligned_be32(&buf[offset]); + offset += 4; + fw_hdr->binary_version_num = get_unaligned_be32(&buf[offset]); + if (fw_hdr->binary_version_num < 0x103) { + dev_err(tas_priv->dev, "File version 0x%04x is too low", + fw_hdr->binary_version_num); + tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; + return -EINVAL; + } + offset += 4; + fw_hdr->drv_fw_version = get_unaligned_be32(&buf[offset]); + offset += 8; + fw_hdr->plat_type = buf[offset++]; + fw_hdr->dev_family = buf[offset++]; + fw_hdr->reserve = buf[offset++]; + fw_hdr->ndev = buf[offset++]; + if (offset + TASDEVICE_DEVICE_SUM > fw_hdr->img_sz) { + dev_err(tas_priv->dev, "rca_ready: Out of boundary!\n"); + tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; + return -EINVAL; + } + + for (i = 0; i < TASDEVICE_DEVICE_SUM; i++, offset++) + fw_hdr->devs[i] = buf[offset]; + + fw_hdr->nconfig = get_unaligned_be32(&buf[offset]); + offset += 4; + + for (i = 0; i < TASDEVICE_CONFIG_SUM; i++) { + fw_hdr->config_size[i] = get_unaligned_be32(&buf[offset]); + offset += 4; + total_config_sz += fw_hdr->config_size[i]; + } + + if (fw_hdr->img_sz - total_config_sz != (unsigned int)offset) { + dev_err(tas_priv->dev, "Bin file err %d - %d != %d!\n", + fw_hdr->img_sz, total_config_sz, (int)offset); + tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; + return -EINVAL; + } + + cfg_info = kcalloc(fw_hdr->nconfig, sizeof(*cfg_info), GFP_KERNEL); + if (!cfg_info) { + tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; + return -ENOMEM; + } + rca->cfg_info = cfg_info; + rca->ncfgs = 0; + for (i = 0; i < (int)fw_hdr->nconfig; i++) { + rca->ncfgs += 1; + cfg_info[i] = tasdevice_add_config(tas_priv, &buf[offset], + fw_hdr->config_size[i], &ret); + if (ret) { + tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; + return ret; + } + offset += (int)fw_hdr->config_size[i]; + } + + return ret; +} + +/* fixed m68k compiling issue: mapping table can save code field */ +static unsigned char map_dev_idx(struct tasdevice_fw *tas_fmw, + struct tasdev_blk *block) +{ + struct blktyp_devidx_map *p = + (struct blktyp_devidx_map *)non_ppc3_mapping_table; + struct tasdevice_dspfw_hdr *fw_hdr = &tas_fmw->fw_hdr; + struct tasdevice_fw_fixed_hdr *fw_fixed_hdr = &fw_hdr->fixed_hdr; + int i, n = ARRAY_SIZE(non_ppc3_mapping_table); + unsigned char dev_idx = 0; + + if (fw_fixed_hdr->ppcver >= PPC3_VERSION_TAS2781) { + p = (struct blktyp_devidx_map *)ppc3_tas2781_mapping_table; + n = ARRAY_SIZE(ppc3_tas2781_mapping_table); + } else if (fw_fixed_hdr->ppcver >= PPC3_VERSION) { + p = (struct blktyp_devidx_map *)ppc3_mapping_table; + n = ARRAY_SIZE(ppc3_mapping_table); + } + + for (i = 0; i < n; i++) { + if (block->type == p[i].blktyp) { + dev_idx = p[i].dev_idx; + break; + } + } + + return dev_idx; +} + +/* Block parser function. */ +static int fw_parse_block_data_kernel(struct tasdevice_fw *tas_fmw, + struct tasdev_blk *block, const struct firmware *fmw, int offset) +{ + const unsigned char *data = fmw->data; + + if (offset + 16 > fmw->size) { + dev_err(tas_fmw->dev, "%s: File Size error\n", __func__); + return -EINVAL; + } + + /* + * Convert data[offset], data[offset + 1], data[offset + 2] and + * data[offset + 3] into host. + */ + block->type = get_unaligned_be32(&data[offset]); + offset += 4; + + block->is_pchksum_present = data[offset++]; + block->pchksum = data[offset++]; + block->is_ychksum_present = data[offset++]; + block->ychksum = data[offset++]; + block->blk_size = get_unaligned_be32(&data[offset]); + offset += 4; + block->nr_subblocks = get_unaligned_be32(&data[offset]); + offset += 4; + + /* + * Fixed m68k compiling issue: + * 1. mapping table can save code field. + * 2. storing the dev_idx as a member of block can reduce unnecessary + * time and system resource comsumption of dev_idx mapping every + * time the block data writing to the dsp. + */ + block->dev_idx = map_dev_idx(tas_fmw, block); + + if (offset + block->blk_size > fmw->size) { + dev_err(tas_fmw->dev, "%s: nSublocks error\n", __func__); + return -EINVAL; + } + /* instead of kzalloc+memcpy */ + block->data = kmemdup(&data[offset], block->blk_size, GFP_KERNEL); + if (!block->data) + return -ENOMEM; + + offset += block->blk_size; + + return offset; +} + +/* Data of block parser function. */ +static int fw_parse_data_kernel(struct tasdevice_fw *tas_fmw, + struct tasdevice_data *img_data, const struct firmware *fmw, + int offset) +{ + const unsigned char *data = fmw->data; + struct tasdev_blk *blk; + unsigned int i; + + if (offset + 4 > fmw->size) { + dev_err(tas_fmw->dev, "%s: File Size error\n", __func__); + return -EINVAL; + } + img_data->nr_blk = get_unaligned_be32(&data[offset]); + offset += 4; + + img_data->dev_blks = kcalloc(img_data->nr_blk, + sizeof(struct tasdev_blk), GFP_KERNEL); + if (!img_data->dev_blks) + return -ENOMEM; + + for (i = 0; i < img_data->nr_blk; i++) { + blk = &img_data->dev_blks[i]; + offset = fw_parse_block_data_kernel( + tas_fmw, blk, fmw, offset); + if (offset < 0) { + kfree(img_data->dev_blks); + return -EINVAL; + } + } + + return offset; +} + +/* Data of DSP program parser function. */ +static int fw_parse_program_data_kernel( + struct tasdevice_priv *tas_priv, struct tasdevice_fw *tas_fmw, + const struct firmware *fmw, int offset) +{ + struct tasdevice_prog *program; + unsigned int i; + + for (i = 0; i < tas_fmw->nr_programs; i++) { + program = &tas_fmw->programs[i]; + if (offset + 72 > fmw->size) { + dev_err(tas_priv->dev, "%s: mpName error\n", __func__); + return -EINVAL; + } + /* skip 72 unused byts */ + offset += 72; + + offset = fw_parse_data_kernel(tas_fmw, &program->dev_data, + fmw, offset); + if (offset < 0) + break; + } + + return offset; +} + +/* Data of DSP configurations parser function. */ +static int fw_parse_configuration_data_kernel(struct tasdevice_priv *tas_priv, + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) +{ + const unsigned char *data = fmw->data; + struct tasdevice_config *config; + unsigned int i; + + for (i = 0; i < tas_fmw->nr_configurations; i++) { + config = &tas_fmw->configs[i]; + if (offset + 80 > fmw->size) { + dev_err(tas_priv->dev, "%s: mpName error\n", __func__); + return -EINVAL; + } + memcpy(config->name, &data[offset], 64); + /* skip extra 16 bytes */ + offset += 80; + + offset = fw_parse_data_kernel(tas_fmw, &config->dev_data, + fmw, offset); + if (offset < 0) + break; + } + + return offset; +} + +/* DSP firmware file header parser function for early PPC3 firmware binary. */ +static int fw_parse_variable_header_kernel(struct tasdevice_priv *tas_priv, + const struct firmware *fmw, int offset) +{ + struct tasdevice_fw *tas_fmw = tas_priv->fmw; + struct tasdevice_dspfw_hdr *fw_hdr = &tas_fmw->fw_hdr; + struct tasdevice_config *config; + struct tasdevice_prog *program; + const unsigned char *buf = fmw->data; + unsigned short max_confs; + unsigned int i; + + if (offset + 12 + 4 * TASDEVICE_MAXPROGRAM_NUM_KERNEL > fmw->size) { + dev_err(tas_priv->dev, "%s: File Size error\n", __func__); + return -EINVAL; + } + fw_hdr->device_family = get_unaligned_be16(&buf[offset]); + if (fw_hdr->device_family != 0) { + dev_err(tas_priv->dev, "%s:not TAS device\n", __func__); + return -EINVAL; + } + offset += 2; + fw_hdr->device = get_unaligned_be16(&buf[offset]); + if (fw_hdr->device >= TASDEVICE_DSP_TAS_MAX_DEVICE || + fw_hdr->device == 6) { + dev_err(tas_priv->dev, "Unsupported dev %d\n", fw_hdr->device); + return -EINVAL; + } + offset += 2; + + tas_fmw->nr_programs = get_unaligned_be32(&buf[offset]); + offset += 4; + + if (tas_fmw->nr_programs == 0 || + tas_fmw->nr_programs > TASDEVICE_MAXPROGRAM_NUM_KERNEL) { + dev_err(tas_priv->dev, "mnPrograms is invalid\n"); + return -EINVAL; + } + + tas_fmw->programs = kcalloc(tas_fmw->nr_programs, + sizeof(*tas_fmw->programs), GFP_KERNEL); + if (!tas_fmw->programs) + return -ENOMEM; + + for (i = 0; i < tas_fmw->nr_programs; i++) { + program = &tas_fmw->programs[i]; + program->prog_size = get_unaligned_be32(&buf[offset]); + offset += 4; + } + + /* Skip the unused prog_size */ + offset += 4 * (TASDEVICE_MAXPROGRAM_NUM_KERNEL - tas_fmw->nr_programs); + + tas_fmw->nr_configurations = get_unaligned_be32(&buf[offset]); + offset += 4; + + /* + * The max number of config in firmware greater than 4 pieces of + * tas2781s is different from the one lower than 4 pieces of + * tas2781s. + */ + max_confs = TASDEVICE_MAXCONFIG_NUM_KERNEL; + if (tas_fmw->nr_configurations == 0 || + tas_fmw->nr_configurations > max_confs) { + dev_err(tas_priv->dev, "%s: Conf is invalid\n", __func__); + kfree(tas_fmw->programs); + return -EINVAL; + } + + if (offset + 4 * max_confs > fmw->size) { + dev_err(tas_priv->dev, "%s: mpConfigurations err\n", __func__); + kfree(tas_fmw->programs); + return -EINVAL; + } + + tas_fmw->configs = kcalloc(tas_fmw->nr_configurations, + sizeof(*tas_fmw->configs), GFP_KERNEL); + if (!tas_fmw->configs) { + kfree(tas_fmw->programs); + return -ENOMEM; + } + + for (i = 0; i < tas_fmw->nr_programs; i++) { + config = &tas_fmw->configs[i]; + config->cfg_size = get_unaligned_be32(&buf[offset]); + offset += 4; + } + + /* Skip the unused configs */ + offset += 4 * (max_confs - tas_fmw->nr_programs); + + return offset; +} + +/* + * In sub-block data, have three type sub-block: + * 1. Single byte write. + * 2. Multi-byte write. + * 3. Delay. + * 4. Bits update. + * This function perform single byte write to device. + */ +static int tasdevice_single_byte_wr(void *context, int dev_idx, + unsigned char *data, int sublocksize) +{ + struct tasdevice_priv *tas_priv = context; + unsigned short len = get_unaligned_be16(&data[2]); + int i, subblk_offset, rc; + + subblk_offset = 4; + if (subblk_offset + 4 * len > sublocksize) { + dev_err(tas_priv->dev, "process_block: Out of boundary\n"); + return 0; + } + + for (i = 0; i < len; i++) { + if (dev_idx == (tas_priv->index + 1) || dev_idx == 0) { + rc = tasdevice_spi_dev_write(tas_priv, + TASDEVICE_REG(data[subblk_offset], + data[subblk_offset + 1], + data[subblk_offset + 2]), + data[subblk_offset + 3]); + if (rc < 0) { + dev_err(tas_priv->dev, + "process_block: single write error\n"); + subblk_offset |= OFFSET_ERROR_BIT; + } + } + subblk_offset += 4; + } + + return subblk_offset; +} +/* + * In sub-block data, have three type sub-block: + * 1. Single byte write. + * 2. Multi-byte write. + * 3. Delay. + * 4. Bits update. + * This function perform multi-write to device. + */ +static int tasdevice_burst_wr(void *context, int dev_idx, unsigned char *data, + int sublocksize) +{ + struct tasdevice_priv *tas_priv = context; + unsigned short len = get_unaligned_be16(&data[2]); + int subblk_offset, rc; + + subblk_offset = 4; + if (subblk_offset + 4 + len > sublocksize) { + dev_err(tas_priv->dev, "%s: BST Out of boundary\n", __func__); + subblk_offset |= OFFSET_ERROR_BIT; + } + if (len % 4) { + dev_err(tas_priv->dev, "%s:Bst-len(%u)not div by 4\n", + __func__, len); + subblk_offset |= OFFSET_ERROR_BIT; + } + + if (dev_idx == (tas_priv->index + 1) || dev_idx == 0) { + rc = tasdevice_spi_dev_bulk_write(tas_priv, + TASDEVICE_REG(data[subblk_offset], + data[subblk_offset + 1], + data[subblk_offset + 2]), + &data[subblk_offset + 4], len); + if (rc < 0) { + dev_err(tas_priv->dev, "%s: bulk_write error = %d\n", + __func__, rc); + subblk_offset |= OFFSET_ERROR_BIT; + } + } + subblk_offset += (len + 4); + + return subblk_offset; +} +/* Just delay for ms.*/ +static int tasdevice_delay(void *context, int dev_idx, unsigned char *data, + int sublocksize) +{ + struct tasdevice_priv *tas_priv = context; + unsigned int sleep_time, subblk_offset = 2; + + if (subblk_offset + 2 > sublocksize) { + dev_err(tas_priv->dev, "%s: delay Out of boundary\n", + __func__); + subblk_offset |= OFFSET_ERROR_BIT; + } + if (dev_idx == (tas_priv->index + 1) || dev_idx == 0) { + sleep_time = get_unaligned_be16(&data[2]) * 1000; + fsleep(sleep_time); + } + subblk_offset += 2; + + return subblk_offset; +} +/* + * In sub-block data, have three type sub-block: + * 1. Single byte write. + * 2. Multi-byte write. + * 3. Delay. + * 4. Bits update. + * This function perform bits update. + */ +static int tasdevice_field_wr(void *context, int dev_idx, unsigned char *data, + int sublocksize) +{ + struct tasdevice_priv *tas_priv = context; + int rc, subblk_offset = 2; + + if (subblk_offset + 6 > sublocksize) { + dev_err(tas_priv->dev, "%s: bit write Out of boundary\n", + __func__); + subblk_offset |= OFFSET_ERROR_BIT; + } + if (dev_idx == (tas_priv->index + 1) || dev_idx == 0) { + rc = tasdevice_spi_dev_update_bits(tas_priv, + TASDEVICE_REG(data[subblk_offset + 2], + data[subblk_offset + 3], + data[subblk_offset + 4]), + data[subblk_offset + 1], + data[subblk_offset + 5]); + if (rc < 0) { + dev_err(tas_priv->dev, "%s: update_bits error = %d\n", + __func__, rc); + subblk_offset |= OFFSET_ERROR_BIT; + } + } + subblk_offset += 6; + + return subblk_offset; +} +/* Data block process function. */ +static int tasdevice_process_block(void *context, unsigned char *data, + unsigned char dev_idx, int sublocksize) +{ + struct tasdevice_priv *tas_priv = context; + int blktyp = dev_idx & 0xC0, subblk_offset; + unsigned char subblk_typ = data[1]; + + switch (subblk_typ) { + case TASDEVICE_CMD_SING_W: + subblk_offset = tasdevice_single_byte_wr(tas_priv, + dev_idx & 0x4f, data, sublocksize); + break; + case TASDEVICE_CMD_BURST: + subblk_offset = tasdevice_burst_wr(tas_priv, + dev_idx & 0x4f, data, sublocksize); + break; + case TASDEVICE_CMD_DELAY: + subblk_offset = tasdevice_delay(tas_priv, + dev_idx & 0x4f, data, sublocksize); + break; + case TASDEVICE_CMD_FIELD_W: + subblk_offset = tasdevice_field_wr(tas_priv, + dev_idx & 0x4f, data, sublocksize); + break; + default: + subblk_offset = 2; + break; + } + if (((subblk_offset & OFFSET_ERROR_BIT) != 0) && blktyp != 0) { + if (blktyp == 0x80) { + tas_priv->cur_prog = -1; + tas_priv->cur_conf = -1; + } else + tas_priv->cur_conf = -1; + } + subblk_offset &= ~OFFSET_ERROR_BIT; + + return subblk_offset; +} +/* + * Device support different configurations for different scene, + * this function was used for choose different config. + */ +void tasdevice_spi_select_cfg_blk(void *pContext, int conf_no, + unsigned char block_type) +{ + struct tasdevice_priv *tas_priv = pContext; + struct tasdevice_rca *rca = &tas_priv->rcabin; + struct tasdevice_config_info **cfg_info = rca->cfg_info; + struct tasdev_blk_data **blk_data; + unsigned int j, k; + + if (conf_no >= rca->ncfgs || conf_no < 0 || !cfg_info) { + dev_err(tas_priv->dev, "conf_no should be not more than %u\n", + rca->ncfgs); + return; + } + blk_data = cfg_info[conf_no]->blk_data; + + for (j = 0; j < cfg_info[conf_no]->real_nblocks; j++) { + unsigned int length = 0, rc = 0; + + if (block_type > 5 || block_type < 2) { + dev_err(tas_priv->dev, + "block_type should be in range from 2 to 5\n"); + break; + } + if (block_type != blk_data[j]->block_type) + continue; + + for (k = 0; k < blk_data[j]->n_subblks; k++) { + tas_priv->is_loading = true; + + rc = tasdevice_process_block(tas_priv, + blk_data[j]->regdata + length, + blk_data[j]->dev_idx, + blk_data[j]->block_size - length); + length += rc; + if (blk_data[j]->block_size < length) { + dev_err(tas_priv->dev, + "%s: %u %u out of boundary\n", + __func__, length, + blk_data[j]->block_size); + break; + } + } + if (length != blk_data[j]->block_size) + dev_err(tas_priv->dev, "%s: %u %u size is not same\n", + __func__, length, blk_data[j]->block_size); + } +} +/* Block process function. */ +static int tasdevice_load_block_kernel( + struct tasdevice_priv *tasdevice, struct tasdev_blk *block) +{ + const unsigned int blk_size = block->blk_size; + unsigned char *data = block->data; + unsigned int i, length; + + for (i = 0, length = 0; i < block->nr_subblocks; i++) { + int rc = tasdevice_process_block(tasdevice, data + length, + block->dev_idx, blk_size - length); + if (rc < 0) { + dev_err(tasdevice->dev, + "%s: %u %u sublock write error\n", + __func__, length, blk_size); + break; + } + length += rc; + if (blk_size < length) { + dev_err(tasdevice->dev, "%s: %u %u out of boundary\n", + __func__, length, blk_size); + break; + } + } + + return 0; +} +/* DSP firmware file header parser function. */ +static int fw_parse_variable_hdr(struct tasdevice_priv *tas_priv, + struct tasdevice_dspfw_hdr *fw_hdr, + const struct firmware *fmw, int offset) +{ + const unsigned char *buf = fmw->data; + int len = strlen((char *)&buf[offset]); + + len++; + + if (offset + len + 8 > fmw->size) { + dev_err(tas_priv->dev, "%s: File Size error\n", __func__); + return -EINVAL; + } + + offset += len; + + fw_hdr->device_family = get_unaligned_be32(&buf[offset]); + if (fw_hdr->device_family != 0) { + dev_err(tas_priv->dev, "%s: not TAS device\n", __func__); + return -EINVAL; + } + offset += 4; + + fw_hdr->device = get_unaligned_be32(&buf[offset]); + if (fw_hdr->device >= TASDEVICE_DSP_TAS_MAX_DEVICE || + fw_hdr->device == 6) { + dev_err(tas_priv->dev, "Unsupported dev %d\n", fw_hdr->device); + return -EINVAL; + } + offset += 4; + fw_hdr->ndev = 1; + + return offset; +} + +/* DSP firmware file header parser function for size variabled header. */ +static int fw_parse_variable_header_git(struct tasdevice_priv + *tas_priv, const struct firmware *fmw, int offset) +{ + struct tasdevice_fw *tas_fmw = tas_priv->fmw; + struct tasdevice_dspfw_hdr *fw_hdr = &tas_fmw->fw_hdr; + + offset = fw_parse_variable_hdr(tas_priv, fw_hdr, fmw, offset); + + return offset; +} + +/* DSP firmware file block parser function. */ +static int fw_parse_block_data(struct tasdevice_fw *tas_fmw, + struct tasdev_blk *block, const struct firmware *fmw, int offset) +{ + unsigned char *data = (unsigned char *)fmw->data; + int n; + + if (offset + 8 > fmw->size) { + dev_err(tas_fmw->dev, "%s: Type error\n", __func__); + return -EINVAL; + } + block->type = get_unaligned_be32(&data[offset]); + offset += 4; + + if (tas_fmw->fw_hdr.fixed_hdr.drv_ver >= PPC_DRIVER_CRCCHK) { + if (offset + 8 > fmw->size) { + dev_err(tas_fmw->dev, "PChkSumPresent error\n"); + return -EINVAL; + } + block->is_pchksum_present = data[offset]; + offset++; + + block->pchksum = data[offset]; + offset++; + + block->is_ychksum_present = data[offset]; + offset++; + + block->ychksum = data[offset]; + offset++; + } else { + block->is_pchksum_present = 0; + block->is_ychksum_present = 0; + } + + block->nr_cmds = get_unaligned_be32(&data[offset]); + offset += 4; + + n = block->nr_cmds * 4; + if (offset + n > fmw->size) { + dev_err(tas_fmw->dev, + "%s: File Size(%lu) error offset = %d n = %d\n", + __func__, (unsigned long)fmw->size, offset, n); + return -EINVAL; + } + /* instead of kzalloc+memcpy */ + block->data = kmemdup(&data[offset], n, GFP_KERNEL); + if (!block->data) + return -ENOMEM; + + offset += n; + + return offset; +} + +/* + * When parsing error occurs, all the memory resource will be released + * in the end of tasdevice_rca_ready. + */ +static int fw_parse_data(struct tasdevice_fw *tas_fmw, + struct tasdevice_data *img_data, const struct firmware *fmw, + int offset) +{ + const unsigned char *data = (unsigned char *)fmw->data; + struct tasdev_blk *blk; + unsigned int i, n; + + if (offset + 64 > fmw->size) { + dev_err(tas_fmw->dev, "%s: Name error\n", __func__); + return -EINVAL; + } + memcpy(img_data->name, &data[offset], 64); + offset += 64; + + n = strlen((char *)&data[offset]); + n++; + if (offset + n + 2 > fmw->size) { + dev_err(tas_fmw->dev, "%s: Description error\n", __func__); + return -EINVAL; + } + offset += n; + img_data->nr_blk = get_unaligned_be16(&data[offset]); + offset += 2; + + img_data->dev_blks = kcalloc(img_data->nr_blk, + sizeof(*img_data->dev_blks), GFP_KERNEL); + if (!img_data->dev_blks) + return -ENOMEM; + + for (i = 0; i < img_data->nr_blk; i++) { + blk = &img_data->dev_blks[i]; + offset = fw_parse_block_data(tas_fmw, blk, fmw, offset); + if (offset < 0) + return -EINVAL; + } + + return offset; +} + +/* + * When parsing error occurs, all the memory resource will be released + * in the end of tasdevice_rca_ready. + */ +static int fw_parse_program_data(struct tasdevice_priv *tas_priv, + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) +{ + unsigned char *buf = (unsigned char *)fmw->data; + struct tasdevice_prog *program; + int i; + + if (offset + 2 > fmw->size) { + dev_err(tas_priv->dev, "%s: File Size error\n", __func__); + return -EINVAL; + } + tas_fmw->nr_programs = get_unaligned_be16(&buf[offset]); + offset += 2; + + if (tas_fmw->nr_programs == 0) { + /* Not error in calibration Data file, return directly */ + dev_dbg(tas_priv->dev, "%s: No Programs data, maybe calbin\n", + __func__); + return offset; + } + + tas_fmw->programs = + kcalloc(tas_fmw->nr_programs, sizeof(*tas_fmw->programs), + GFP_KERNEL); + if (!tas_fmw->programs) + return -ENOMEM; + + for (i = 0; i < tas_fmw->nr_programs; i++) { + int n = 0; + + program = &tas_fmw->programs[i]; + if (offset + 64 > fmw->size) { + dev_err(tas_priv->dev, "%s: mpName error\n", __func__); + return -EINVAL; + } + offset += 64; + + n = strlen((char *)&buf[offset]); + /* skip '\0' and 5 unused bytes */ + n += 6; + if (offset + n > fmw->size) { + dev_err(tas_priv->dev, "Description err\n"); + return -EINVAL; + } + + offset += n; + + offset = fw_parse_data(tas_fmw, &program->dev_data, fmw, + offset); + if (offset < 0) + return offset; + } + + return offset; +} + +/* + * When parsing error occurs, all the memory resource will be released + * in the end of tasdevice_rca_ready. + */ +static int fw_parse_configuration_data(struct tasdevice_priv *tas_priv, + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) +{ + unsigned char *data = (unsigned char *)fmw->data; + struct tasdevice_config *config; + unsigned int i, n; + + if (offset + 2 > fmw->size) { + dev_err(tas_priv->dev, "%s: File Size error\n", __func__); + return -EINVAL; + } + tas_fmw->nr_configurations = get_unaligned_be16(&data[offset]); + offset += 2; + + if (tas_fmw->nr_configurations == 0) { + dev_err(tas_priv->dev, "%s: Conf is zero\n", __func__); + /* Not error for calibration Data file, return directly */ + return offset; + } + tas_fmw->configs = kcalloc(tas_fmw->nr_configurations, + sizeof(*tas_fmw->configs), GFP_KERNEL); + if (!tas_fmw->configs) + return -ENOMEM; + for (i = 0; i < tas_fmw->nr_configurations; i++) { + config = &tas_fmw->configs[i]; + if (offset + 64 > fmw->size) { + dev_err(tas_priv->dev, "File Size err\n"); + return -EINVAL; + } + memcpy(config->name, &data[offset], 64); + offset += 64; + + n = strlen((char *)&data[offset]); + n += 15; + if (offset + n > fmw->size) { + dev_err(tas_priv->dev, "Description err\n"); + return -EINVAL; + } + offset += n; + offset = fw_parse_data(tas_fmw, &config->dev_data, + fmw, offset); + if (offset < 0) + break; + } + + return offset; +} + +/* yram5 page check. */ +static bool check_inpage_yram_rg(struct tas_crc *cd, + unsigned char reg, unsigned char len) +{ + bool in = false; + + if (reg <= TAS2781_YRAM5_END_REG && + reg >= TAS2781_YRAM5_START_REG) { + if (reg + len > TAS2781_YRAM5_END_REG) + cd->len = TAS2781_YRAM5_END_REG - reg + 1; + else + cd->len = len; + cd->offset = reg; + in = true; + } else if (reg < TAS2781_YRAM5_START_REG) { + if (reg + len > TAS2781_YRAM5_START_REG) { + cd->offset = TAS2781_YRAM5_START_REG; + cd->len = len - TAS2781_YRAM5_START_REG + reg; + in = true; + } + } + + return in; +} + +/* DSP firmware yram block check. */ +static bool check_inpage_yram_bk1(struct tas_crc *cd, + unsigned char page, unsigned char reg, unsigned char len) +{ + bool in = false; + + if (page == TAS2781_YRAM1_PAGE) { + if (reg >= TAS2781_YRAM1_START_REG) { + cd->offset = reg; + cd->len = len; + in = true; + } else if (reg + len > TAS2781_YRAM1_START_REG) { + cd->offset = TAS2781_YRAM1_START_REG; + cd->len = len - TAS2781_YRAM1_START_REG + reg; + in = true; + } + } else if (page == TAS2781_YRAM3_PAGE) { + in = check_inpage_yram_rg(cd, reg, len); + } + + return in; +} + +/* + * Return Code: + * true -- the registers are in the inpage yram + * false -- the registers are NOT in the inpage yram + */ +static bool check_inpage_yram(struct tas_crc *cd, unsigned char book, + unsigned char page, unsigned char reg, unsigned char len) +{ + bool in = false; + + if (book == TAS2781_YRAM_BOOK1) + in = check_inpage_yram_bk1(cd, page, reg, len); + else if (book == TAS2781_YRAM_BOOK2 && page == TAS2781_YRAM5_PAGE) + in = check_inpage_yram_rg(cd, reg, len); + + return in; +} +/* yram4 page check. */ +static bool check_inblock_yram_bk(struct tas_crc *cd, + unsigned char page, unsigned char reg, unsigned char len) +{ + bool in = false; + + if ((page >= TAS2781_YRAM4_START_PAGE && + page <= TAS2781_YRAM4_END_PAGE) || + (page >= TAS2781_YRAM2_START_PAGE && + page <= TAS2781_YRAM2_END_PAGE)) { + if (reg <= TAS2781_YRAM2_END_REG && + reg >= TAS2781_YRAM2_START_REG) { + cd->offset = reg; + cd->len = len; + in = true; + } else if (reg < TAS2781_YRAM2_START_REG) { + if (reg + len - 1 >= TAS2781_YRAM2_START_REG) { + cd->offset = TAS2781_YRAM2_START_REG; + cd->len = reg + len - TAS2781_YRAM2_START_REG; + in = true; + } + } + } + + return in; +} + +/* + * Return Code: + * true -- the registers are in the inblock yram + * false -- the registers are NOT in the inblock yram + */ +static bool check_inblock_yram(struct tas_crc *cd, unsigned char book, + unsigned char page, unsigned char reg, unsigned char len) +{ + bool in = false; + + if (book == TAS2781_YRAM_BOOK1 || book == TAS2781_YRAM_BOOK2) + in = check_inblock_yram_bk(cd, page, reg, len); + + return in; +} +/* yram page check. */ +static bool check_yram(struct tas_crc *cd, unsigned char book, + unsigned char page, unsigned char reg, unsigned char len) +{ + bool in; + + in = check_inpage_yram(cd, book, page, reg, len); + if (!in) + in = check_inblock_yram(cd, book, page, reg, len); + + return in; +} + +/* Checksum for data block. */ +static int tasdev_multibytes_chksum(struct tasdevice_priv *tasdevice, + unsigned char book, unsigned char page, + unsigned char reg, unsigned int len) +{ + struct tas_crc crc_data; + unsigned char crc_chksum = 0; + unsigned char nBuf1[128]; + int ret = 0, i; + bool in; + + if ((reg + len - 1) > 127) { + ret = -EINVAL; + dev_err(tasdevice->dev, "firmware error\n"); + goto end; + } + + if ((book == TASDEVICE_BOOK_ID(TAS2781_SA_COEFF_SWAP_REG)) && + (page == TASDEVICE_PAGE_ID(TAS2781_SA_COEFF_SWAP_REG)) && + (reg == TASDEVICE_REG_ID(TAS2781_SA_COEFF_SWAP_REG)) && + (len == 4)) { + /* DSP swap command, pass */ + ret = 0; + goto end; + } + + in = check_yram(&crc_data, book, page, reg, len); + if (!in) + goto end; + + if (len == 1) { + dev_err(tasdevice->dev, "firmware error\n"); + ret = -EINVAL; + goto end; + } + + ret = tasdevice_spi_dev_bulk_read(tasdevice, + TASDEVICE_REG(book, page, crc_data.offset), + nBuf1, crc_data.len); + if (ret < 0) + goto end; + + for (i = 0; i < crc_data.len; i++) { + if ((book == TASDEVICE_BOOK_ID(TAS2781_SA_COEFF_SWAP_REG)) && + (page == TASDEVICE_PAGE_ID(TAS2781_SA_COEFF_SWAP_REG)) && + ((i + crc_data.offset) >= + TASDEVICE_REG_ID(TAS2781_SA_COEFF_SWAP_REG)) && + ((i + crc_data.offset) <= + (TASDEVICE_REG_ID(TAS2781_SA_COEFF_SWAP_REG) + 4))) + /* DSP swap command, bypass */ + continue; + else + crc_chksum += crc8(tasdevice->crc8_lkp_tbl, &nBuf1[i], + 1, 0); + } + + ret = crc_chksum; + +end: + return ret; +} + +/* Checksum for single register. */ +static int do_singlereg_checksum(struct tasdevice_priv *tasdevice, + unsigned char book, unsigned char page, + unsigned char reg, unsigned char val) +{ + struct tas_crc crc_data; + unsigned int nData1; + int ret = 0; + bool in; + + /* DSP swap command, pass */ + if ((book == TASDEVICE_BOOK_ID(TAS2781_SA_COEFF_SWAP_REG)) && + (page == TASDEVICE_PAGE_ID(TAS2781_SA_COEFF_SWAP_REG)) && + (reg >= TASDEVICE_REG_ID(TAS2781_SA_COEFF_SWAP_REG)) && + (reg <= (TASDEVICE_REG_ID(TAS2781_SA_COEFF_SWAP_REG) + 4))) + return 0; + + in = check_yram(&crc_data, book, page, reg, 1); + if (!in) + return 0; + ret = tasdevice_spi_dev_read(tasdevice, + TASDEVICE_REG(book, page, reg), &nData1); + if (ret < 0) + return ret; + + if (nData1 != val) { + dev_err(tasdevice->dev, + "B[0x%x]P[0x%x]R[0x%x] W[0x%x], R[0x%x]\n", + book, page, reg, val, nData1); + tasdevice->err_code |= ERROR_YRAM_CRCCHK; + return -EAGAIN; + } + + ret = crc8(tasdevice->crc8_lkp_tbl, &val, 1, 0); + + return ret; +} + +/* Block type check. */ +static void set_err_prg_cfg(unsigned int type, struct tasdevice_priv *p) +{ + if ((type == MAIN_ALL_DEVICES) || (type == MAIN_DEVICE_A) || + (type == MAIN_DEVICE_B) || (type == MAIN_DEVICE_C) || + (type == MAIN_DEVICE_D)) + p->cur_prog = -1; + else + p->cur_conf = -1; +} +/* Checksum for data bytes. */ +static int tasdev_bytes_chksum(struct tasdevice_priv *tas_priv, + struct tasdev_blk *block, unsigned char book, + unsigned char page, unsigned char reg, unsigned int len, + unsigned char val, unsigned char *crc_chksum) +{ + int ret; + + if (len > 1) + ret = tasdev_multibytes_chksum(tas_priv, book, page, reg, + len); + else + ret = do_singlereg_checksum(tas_priv, book, page, reg, val); + + if (ret > 0) { + *crc_chksum += ret; + goto end; + } + + if (ret != -EAGAIN) + goto end; + + block->nr_retry--; + if (block->nr_retry > 0) + goto end; + + set_err_prg_cfg(block->type, tas_priv); + +end: + return ret; +} +/* Multi-data byte write. */ +static int tasdev_multibytes_wr(struct tasdevice_priv *tas_priv, + struct tasdev_blk *block, unsigned char book, + unsigned char page, unsigned char reg, unsigned char *data, + unsigned int len, unsigned int *nr_cmds, + unsigned char *crc_chksum) +{ + int ret; + + if (len > 1) { + ret = tasdevice_spi_dev_bulk_write(tas_priv, + TASDEVICE_REG(book, page, reg), data + 3, len); + if (ret < 0) + return ret; + if (block->is_ychksum_present) + ret = tasdev_bytes_chksum(tas_priv, block, + book, page, reg, len, 0, crc_chksum); + } else { + ret = tasdevice_spi_dev_write(tas_priv, + TASDEVICE_REG(book, page, reg), data[3]); + if (ret < 0) + return ret; + if (block->is_ychksum_present) + ret = tasdev_bytes_chksum(tas_priv, block, book, + page, reg, 1, data[3], crc_chksum); + } + + if (!block->is_ychksum_present || ret >= 0) { + *nr_cmds += 1; + if (len >= 2) + *nr_cmds += ((len - 2) / 4) + 1; + } + + return ret; +} +/* Checksum for block. */ +static int tasdev_block_chksum(struct tasdevice_priv *tas_priv, + struct tasdev_blk *block) +{ + unsigned int nr_value; + int ret; + + ret = tasdevice_spi_dev_read(tas_priv, TASDEVICE_CHECKSUM, &nr_value); + if (ret < 0) { + dev_err(tas_priv->dev, "%s: read error %d.\n", __func__, ret); + set_err_prg_cfg(block->type, tas_priv); + return ret; + } + + if ((nr_value & 0xff) != block->pchksum) { + dev_err(tas_priv->dev, "%s: PChkSum err %d ", __func__, ret); + dev_err(tas_priv->dev, "PChkSum = 0x%x, Reg = 0x%x\n", + block->pchksum, (nr_value & 0xff)); + tas_priv->err_code |= ERROR_PRAM_CRCCHK; + ret = -EAGAIN; + block->nr_retry--; + + if (block->nr_retry <= 0) + set_err_prg_cfg(block->type, tas_priv); + } else { + tas_priv->err_code &= ~ERROR_PRAM_CRCCHK; + } + + return ret; +} +/* Firmware block load function. */ +static int tasdev_load_blk(struct tasdevice_priv *tas_priv, + struct tasdev_blk *block) +{ + unsigned int sleep_time, len, nr_cmds; + unsigned char offset, book, page, val; + unsigned char *data = block->data; + unsigned char crc_chksum = 0; + int ret = 0; + + while (block->nr_retry > 0) { + if (block->is_pchksum_present) { + ret = tasdevice_spi_dev_write(tas_priv, + TASDEVICE_CHECKSUM, 0); + if (ret < 0) + break; + } + + if (block->is_ychksum_present) + crc_chksum = 0; + + nr_cmds = 0; + + while (nr_cmds < block->nr_cmds) { + data = block->data + nr_cmds * 4; + + book = data[0]; + page = data[1]; + offset = data[2]; + val = data[3]; + + nr_cmds++; + /* Single byte write */ + if (offset <= 0x7F) { + ret = tasdevice_spi_dev_write(tas_priv, + TASDEVICE_REG(book, page, offset), + val); + if (ret < 0) + break; + if (block->is_ychksum_present) { + ret = tasdev_bytes_chksum(tas_priv, + block, book, page, offset, + 1, val, &crc_chksum); + if (ret < 0) + break; + } + continue; + } + /* sleep command */ + if (offset == 0x81) { + /* book -- data[0] page -- data[1] */ + sleep_time = ((book << 8) + page)*1000; + fsleep(sleep_time); + continue; + } + /* Multiple bytes write */ + if (offset == 0x85) { + data += 4; + len = (book << 8) + page; + book = data[0]; + page = data[1]; + offset = data[2]; + ret = tasdev_multibytes_wr(tas_priv, + block, book, page, offset, data, + len, &nr_cmds, &crc_chksum); + if (ret < 0) + break; + } + } + if (ret == -EAGAIN) { + if (block->nr_retry > 0) + continue; + } else if (ret < 0) { + /* err in current device, skip it */ + break; + } + + if (block->is_pchksum_present) { + ret = tasdev_block_chksum(tas_priv, block); + if (ret == -EAGAIN) { + if (block->nr_retry > 0) + continue; + } else if (ret < 0) { + /* err in current device, skip it */ + break; + } + } + + if (block->is_ychksum_present) { + /* TBD, open it when FW ready */ + dev_err(tas_priv->dev, + "Blk YChkSum: FW = 0x%x, YCRC = 0x%x\n", + block->ychksum, crc_chksum); + + tas_priv->err_code &= + ~ERROR_YRAM_CRCCHK; + ret = 0; + } + /* skip current blk */ + break; + } + + return ret; +} +/* Firmware block load function. */ +static int tasdevice_load_block(struct tasdevice_priv *tas_priv, + struct tasdev_blk *block) +{ + int ret = 0; + + block->nr_retry = 6; + if (tas_priv->is_loading == false) + return 0; + ret = tasdev_load_blk(tas_priv, block); + if (ret < 0) + dev_err(tas_priv->dev, "Blk (%d) load error\n", block->type); + + return ret; +} + +/* + * Select firmware binary parser & load callback functions by ppc3 version + * and firmware binary version. + */ +static int dspfw_default_callback(struct tasdevice_priv *tas_priv, + unsigned int drv_ver, unsigned int ppcver) +{ + int rc = 0; + + if (drv_ver == 0x100) { + if (ppcver >= PPC3_VERSION) { + tas_priv->fw_parse_variable_header = + fw_parse_variable_header_kernel; + tas_priv->fw_parse_program_data = + fw_parse_program_data_kernel; + tas_priv->fw_parse_configuration_data = + fw_parse_configuration_data_kernel; + tas_priv->tasdevice_load_block = + tasdevice_load_block_kernel; + } else { + switch (ppcver) { + case 0x00: + tas_priv->fw_parse_variable_header = + fw_parse_variable_header_git; + tas_priv->fw_parse_program_data = + fw_parse_program_data; + tas_priv->fw_parse_configuration_data = + fw_parse_configuration_data; + tas_priv->tasdevice_load_block = + tasdevice_load_block; + break; + default: + dev_err(tas_priv->dev, + "%s: PPCVer must be 0x0 or 0x%02x", + __func__, PPC3_VERSION); + dev_err(tas_priv->dev, " Current:0x%02x\n", + ppcver); + rc = -EINVAL; + break; + } + } + } else { + dev_err(tas_priv->dev, + "DrvVer must be 0x0, 0x230 or above 0x230 "); + dev_err(tas_priv->dev, "current is 0x%02x\n", drv_ver); + rc = -EINVAL; + } + + return rc; +} +/* Calibration block load function. */ +static int load_calib_data(struct tasdevice_priv *tas_priv, + struct tasdevice_data *dev_data) +{ + struct tasdev_blk *block; + unsigned int i; + int ret = 0; + + for (i = 0; i < dev_data->nr_blk; i++) { + block = &dev_data->dev_blks[i]; + ret = tasdevice_load_block(tas_priv, block); + if (ret < 0) + break; + } + + return ret; +} + +/* DSP firmware binary file header parser function. */ +static int fw_parse_header(struct tasdevice_priv *tas_priv, + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) +{ + struct tasdevice_dspfw_hdr *fw_hdr = &tas_fmw->fw_hdr; + struct tasdevice_fw_fixed_hdr *fw_fixed_hdr = &fw_hdr->fixed_hdr; + static const unsigned char magic_number[] = {0x35, 0x35, 0x35, 0x32, }; + const unsigned char *buf = (unsigned char *)fmw->data; + + if (offset + 92 > fmw->size) { + dev_err(tas_priv->dev, "%s: File Size error\n", __func__); + offset = -EINVAL; + goto out; + } + if (memcmp(&buf[offset], magic_number, 4)) { + dev_err(tas_priv->dev, "%s: Magic num NOT match\n", __func__); + offset = -EINVAL; + goto out; + } + offset += 4; + + /* + * Convert data[offset], data[offset + 1], data[offset + 2] and + * data[offset + 3] into host + */ + fw_fixed_hdr->fwsize = get_unaligned_be32(&buf[offset]); + offset += 4; + if (fw_fixed_hdr->fwsize != fmw->size) { + dev_err(tas_priv->dev, "File size not match, %lu %u", + (unsigned long)fmw->size, fw_fixed_hdr->fwsize); + offset = -EINVAL; + goto out; + } + offset += 4; + fw_fixed_hdr->ppcver = get_unaligned_be32(&buf[offset]); + offset += 8; + fw_fixed_hdr->drv_ver = get_unaligned_be32(&buf[offset]); + offset += 72; + +out: + return offset; +} + +/* DSP firmware binary file parser function. */ +static int tasdevice_dspfw_ready(const struct firmware *fmw, void *context) +{ + struct tasdevice_priv *tas_priv = context; + struct tasdevice_fw_fixed_hdr *fw_fixed_hdr; + struct tasdevice_fw *tas_fmw; + int offset = 0, ret = 0; + + if (!fmw || !fmw->data) { + dev_err(tas_priv->dev, "%s: Failed to read firmware %s\n", + __func__, tas_priv->coef_binaryname); + return -EINVAL; + } + + tas_priv->fmw = kzalloc(sizeof(*tas_priv->fmw), GFP_KERNEL); + if (!tas_priv->fmw) + return -ENOMEM; + tas_fmw = tas_priv->fmw; + tas_fmw->dev = tas_priv->dev; + offset = fw_parse_header(tas_priv, tas_fmw, fmw, offset); + + if (offset == -EINVAL) + return -EINVAL; + + fw_fixed_hdr = &tas_fmw->fw_hdr.fixed_hdr; + /* Support different versions of firmware */ + switch (fw_fixed_hdr->drv_ver) { + case 0x301: + case 0x302: + case 0x502: + case 0x503: + tas_priv->fw_parse_variable_header = + fw_parse_variable_header_kernel; + tas_priv->fw_parse_program_data = + fw_parse_program_data_kernel; + tas_priv->fw_parse_configuration_data = + fw_parse_configuration_data_kernel; + tas_priv->tasdevice_load_block = + tasdevice_load_block_kernel; + break; + case 0x202: + case 0x400: + tas_priv->fw_parse_variable_header = + fw_parse_variable_header_git; + tas_priv->fw_parse_program_data = + fw_parse_program_data; + tas_priv->fw_parse_configuration_data = + fw_parse_configuration_data; + tas_priv->tasdevice_load_block = + tasdevice_load_block; + break; + default: + ret = dspfw_default_callback(tas_priv, + fw_fixed_hdr->drv_ver, fw_fixed_hdr->ppcver); + if (ret) + return ret; + break; + } + + offset = tas_priv->fw_parse_variable_header(tas_priv, fmw, offset); + if (offset < 0) + return offset; + + offset = tas_priv->fw_parse_program_data(tas_priv, tas_fmw, fmw, + offset); + if (offset < 0) + return offset; + + offset = tas_priv->fw_parse_configuration_data(tas_priv, + tas_fmw, fmw, offset); + if (offset < 0) + ret = offset; + + return ret; +} +/* DSP firmware binary file parser function. */ +int tasdevice_spi_dsp_parser(void *context) +{ + struct tasdevice_priv *tas_priv = context; + const struct firmware *fw_entry; + int ret; + + ret = request_firmware(&fw_entry, tas_priv->coef_binaryname, + tas_priv->dev); + if (ret) { + dev_err(tas_priv->dev, "%s: load %s error\n", __func__, + tas_priv->coef_binaryname); + return ret; + } + + ret = tasdevice_dspfw_ready(fw_entry, tas_priv); + release_firmware(fw_entry); + fw_entry = NULL; + + return ret; +} + +/* DSP firmware program block data remove function. */ +static void tasdev_dsp_prog_blk_remove(struct tasdevice_prog *prog) +{ + struct tasdevice_data *tas_dt; + struct tasdev_blk *blk; + unsigned int i; + + if (!prog) + return; + + tas_dt = &prog->dev_data; + + if (!tas_dt->dev_blks) + return; + + for (i = 0; i < tas_dt->nr_blk; i++) { + blk = &tas_dt->dev_blks[i]; + kfree(blk->data); + } + kfree(tas_dt->dev_blks); +} + +/* DSP firmware program block data remove function. */ +static void tasdev_dsp_prog_remove(struct tasdevice_prog *prog, + unsigned short nr) +{ + int i; + + for (i = 0; i < nr; i++) + tasdev_dsp_prog_blk_remove(&prog[i]); + kfree(prog); +} + +/* DSP firmware config block data remove function. */ +static void tasdev_dsp_cfg_blk_remove(struct tasdevice_config *cfg) +{ + struct tasdevice_data *tas_dt; + struct tasdev_blk *blk; + unsigned int i; + + if (cfg) { + tas_dt = &cfg->dev_data; + + if (!tas_dt->dev_blks) + return; + + for (i = 0; i < tas_dt->nr_blk; i++) { + blk = &tas_dt->dev_blks[i]; + kfree(blk->data); + } + kfree(tas_dt->dev_blks); + } +} + +/* DSP firmware config remove function. */ +static void tasdev_dsp_cfg_remove(struct tasdevice_config *config, + unsigned short nr) +{ + int i; + + for (i = 0; i < nr; i++) + tasdev_dsp_cfg_blk_remove(&config[i]); + kfree(config); +} + +/* DSP firmware remove function. */ +void tasdevice_spi_dsp_remove(void *context) +{ + struct tasdevice_priv *tas_dev = context; + + if (!tas_dev->fmw) + return; + + if (tas_dev->fmw->programs) + tasdev_dsp_prog_remove(tas_dev->fmw->programs, + tas_dev->fmw->nr_programs); + if (tas_dev->fmw->configs) + tasdev_dsp_cfg_remove(tas_dev->fmw->configs, + tas_dev->fmw->nr_configurations); + kfree(tas_dev->fmw); + tas_dev->fmw = NULL; +} + +/* DSP firmware calibration data remove function. */ +static void tas2781_clear_calfirmware(struct tasdevice_fw *tas_fmw) +{ + struct tasdevice_calibration *calibration; + struct tasdev_blk *block; + unsigned int blks; + int i; + + if (!tas_fmw->calibrations) + goto out; + + for (i = 0; i < tas_fmw->nr_calibrations; i++) { + calibration = &tas_fmw->calibrations[i]; + if (!calibration) + continue; + + if (!calibration->dev_data.dev_blks) + continue; + + for (blks = 0; blks < calibration->dev_data.nr_blk; blks++) { + block = &calibration->dev_data.dev_blks[blks]; + if (!block) + continue; + kfree(block->data); + } + kfree(calibration->dev_data.dev_blks); + } + kfree(tas_fmw->calibrations); +out: + kfree(tas_fmw); +} + +/* Calibration data from firmware remove function. */ +void tasdevice_spi_calbin_remove(void *context) +{ + struct tasdevice_priv *tas_priv = context; + + if (tas_priv->cali_data_fmw) { + tas2781_clear_calfirmware(tas_priv->cali_data_fmw); + tas_priv->cali_data_fmw = NULL; + } +} + +/* Configuration remove function. */ +void tasdevice_spi_config_info_remove(void *context) +{ + struct tasdevice_priv *tas_priv = context; + struct tasdevice_rca *rca = &tas_priv->rcabin; + struct tasdevice_config_info **ci = rca->cfg_info; + unsigned int i, j; + + if (!ci) + return; + for (i = 0; i < rca->ncfgs; i++) { + if (!ci[i]) + continue; + if (ci[i]->blk_data) { + for (j = 0; j < ci[i]->real_nblocks; j++) { + if (!ci[i]->blk_data[j]) + continue; + kfree(ci[i]->blk_data[j]->regdata); + kfree(ci[i]->blk_data[j]); + } + kfree(ci[i]->blk_data); + } + kfree(ci[i]); + } + kfree(ci); +} + +/* DSP firmware program block data load function. */ +static int tasdevice_load_data(struct tasdevice_priv *tas_priv, + struct tasdevice_data *dev_data) +{ + struct tasdev_blk *block; + unsigned int i; + int ret = 0; + + for (i = 0; i < dev_data->nr_blk; i++) { + block = &dev_data->dev_blks[i]; + ret = tas_priv->tasdevice_load_block(tas_priv, block); + if (ret < 0) + break; + } + + return ret; +} + +/* DSP firmware program load function. */ +int tasdevice_spi_select_tuningprm_cfg(void *context, int prm_no, + int cfg_no, int rca_conf_no) +{ + struct tasdevice_priv *tas_priv = context; + struct tasdevice_rca *rca = &tas_priv->rcabin; + struct tasdevice_config_info **cfg_info = rca->cfg_info; + struct tasdevice_fw *tas_fmw = tas_priv->fmw; + struct tasdevice_prog *program; + struct tasdevice_config *conf; + int prog_status = 0; + int status; + + if (!tas_fmw) { + dev_err(tas_priv->dev, "%s: Firmware is NULL\n", __func__); + return 0; + } + + if (cfg_no >= tas_fmw->nr_configurations) { + dev_err(tas_priv->dev, + "%s: cfg(%d) is not in range of conf %u\n", + __func__, cfg_no, tas_fmw->nr_configurations); + return 0; + } + + if (prm_no >= tas_fmw->nr_programs) { + dev_err(tas_priv->dev, + "%s: prm(%d) is not in range of Programs %u\n", + __func__, prm_no, tas_fmw->nr_programs); + return 0; + } + + if (rca_conf_no >= rca->ncfgs || + rca_conf_no < 0 || + !cfg_info) { + dev_err(tas_priv->dev, + "conf_no:%d should be in range from 0 to %u\n", + rca_conf_no, rca->ncfgs-1); + return 0; + } + + if (prm_no >= 0 && + (tas_priv->cur_prog != prm_no || + tas_priv->force_fwload_status)) { + tas_priv->cur_conf = -1; + tas_priv->is_loading = true; + prog_status++; + } + + if (prog_status) { + program = &tas_fmw->programs[prm_no]; + tasdevice_load_data(tas_priv, &program->dev_data); + if (tas_priv->is_loaderr == false && + tas_priv->is_loading == true) { + struct tasdevice_fw *cal_fmw = + tas_priv->cali_data_fmw; + + if (cal_fmw) { + struct tasdevice_calibration + *cal = cal_fmw->calibrations; + + if (cal) + load_calib_data(tas_priv, + &cal->dev_data); + } + tas_priv->cur_prog = prm_no; + } + + } + + if (cfg_no && + (cfg_no != tas_priv->cur_conf) && + (tas_priv->is_loaderr == false)) { + status++; + tas_priv->is_loading = true; + } else { + tas_priv->is_loading = false; + } + if (status) { + conf = &tas_fmw->configs[cfg_no]; + status = 0; + tasdevice_load_data(tas_priv, &conf->dev_data); + if (tas_priv->is_loaderr == true) { + status |= 1 << 4; + } else if (tas_priv->is_loaderr == false && + tas_priv->is_loading == true) { + tas_priv->cur_conf = cfg_no; + } + } else { + dev_dbg(tas_priv->dev, "%s: Unneeded loading dsp conf %d\n", + __func__, cfg_no); + } + + return prog_status; +} + +/* DSP firmware program load interface function. */ +int tasdevice_spi_prmg_load(void *context, int prm_no) +{ + struct tasdevice_priv *tas_priv = context; + struct tasdevice_fw *tas_fmw = tas_priv->fmw; + struct tasdevice_prog *program; + struct tasdevice_config *conf; + int prog_status = 0; + + if (!tas_fmw) { + dev_err(tas_priv->dev, "%s: Firmware is NULL\n", __func__); + return 0; + } + + if (prm_no >= tas_fmw->nr_programs) { + dev_err(tas_priv->dev, + "%s: prm(%d) is not in range of Programs %u\n", + __func__, prm_no, tas_fmw->nr_programs); + return 0; + } + + if (prm_no >= 0) { + tas_priv->cur_conf = 0; + tas_priv->is_loading = true; + prog_status++; + } + if (prog_status) { + program = &tas_fmw->programs[prm_no]; + tasdevice_load_data(tas_priv, &program->dev_data); + tas_priv->cur_prog = prm_no; + } + if (prog_status) { + conf = &tas_fmw->configs[tas_priv->cur_conf]; + tasdevice_load_data(tas_priv, &conf->dev_data); + } + + return prog_status; +} + +/* DSP firmware program switch interface function. */ +void tasdevice_spi_tuning_switch(void *context, int state) +{ + struct tasdevice_priv *tas_priv = context; + int profile_cfg_id = tas_priv->rcabin.profile_cfg_id; + + if (tas_priv->fw_state == TASDEVICE_DSP_FW_FAIL) { + dev_err(tas_priv->dev, "DSP bin file not loaded\n"); + return; + } + + if (state == 0) { + tasdevice_spi_select_cfg_blk(tas_priv, profile_cfg_id, + TASDEVICE_BIN_BLK_PRE_POWER_UP); + } else { + tasdevice_spi_select_cfg_blk(tas_priv, profile_cfg_id, + TASDEVICE_BIN_BLK_PRE_SHUTDOWN); + } +} -- 2.40.1

2 1

[PATCH] sound: hda: tas2781: mark const variables as __maybe_unused
by Arnd Bergmann 19 Jul '24

19 Jul '24

From: Arnd Bergmann <arnd(a)arndb.de> An earlier patch changed the DECLARE_TLV_DB_SCALE declaration, but now there are additional static const variables that cause the same build warnings: In file included from sound/pci/hda/tas2781_hda_i2c.c:23: include/sound/tas2781-tlv.h:23:28: error: 'tas2563_dvc_table' defined but not used [-Werror=unused-const-variable=] 23 | static const unsigned char tas2563_dvc_table[][4] = { | ^~~~~~~~~~~~~~~~~ In file included from include/sound/tlv.h:10, from sound/pci/hda/tas2781_hda_i2c.c:22: include/sound/tas2781-tlv.h:20:35: error: 'tas2563_dvc_tlv' defined but not used [-Werror=unused-const-variable=] 20 | static const DECLARE_TLV_DB_SCALE(tas2563_dvc_tlv, -12150, 50, 1); | ^~~~~~~~~~~~~~~ Mark them all as unused as well. Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> --- include/sound/tas2781-tlv.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/sound/tas2781-tlv.h b/include/sound/tas2781-tlv.h index 99c41bfc7827..00fd4d449ff3 100644 --- a/include/sound/tas2781-tlv.h +++ b/include/sound/tas2781-tlv.h @@ -16,11 +16,11 @@ #define __TAS2781_TLV_H__ static const __maybe_unused DECLARE_TLV_DB_SCALE(dvc_tlv, -10000, 100, 0); -static const DECLARE_TLV_DB_SCALE(amp_vol_tlv, 1100, 50, 0); -static const DECLARE_TLV_DB_SCALE(tas2563_dvc_tlv, -12150, 50, 1); +static const __maybe_unused DECLARE_TLV_DB_SCALE(amp_vol_tlv, 1100, 50, 0); +static const __maybe_unused DECLARE_TLV_DB_SCALE(tas2563_dvc_tlv, -12150, 50, 1); /* pow(10, db/20) * pow(2,30) */ -static const unsigned char tas2563_dvc_table[][4] = { +static const __maybe_unused unsigned char tas2563_dvc_table[][4] = { { 0X00, 0X00, 0X00, 0X00 }, /* -121.5db */ { 0X00, 0X00, 0X03, 0XBC }, /* -121.0db */ { 0X00, 0X00, 0X03, 0XF5 }, /* -120.5db */ -- 2.39.2

2 1

[PATCH] ALSA: usb-audio: Add a quirk for Sonix HD USB Camera
by wangdicheng 19 Jul '24

19 Jul '24

From: wangdicheng <wangdicheng(a)kylinos.cn> Sonix HD USB Camera does not support reading the sample rate which leads to many lines of "cannot get freq at ep 0x84". This patch adds the USB ID to quirks.c and avoids those error messages. (snip) [1.789698] usb 3-3: new high-speed USB device number 2 using xhci_hcd [1.984121] usb 3-3: New USB device found, idVendor=0c45, idProduct=6340, bcdDevice= 0.00 [1.984124] usb 3-3: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [1.984127] usb 3-3: Product: USB 2.0 Camera [1.984128] usb 3-3: Manufacturer: Sonix Technology Co., Ltd. [5.440957] usb 3-3: 3:1: cannot get freq at ep 0x84 [12.130679] usb 3-3: 3:1: cannot get freq at ep 0x84 [12.175065] usb 3-3: 3:1: cannot get freq at ep 0x84 Signed-off-by: wangdicheng <wangdicheng(a)kylinos.cn> --- sound/usb/quirks.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 09712e61c606..c1fd690cbac0 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -2033,6 +2033,8 @@ static const struct usb_audio_quirk_flags_table quirk_flags_table[] = { QUIRK_FLAG_GENERIC_IMPLICIT_FB), DEVICE_FLG(0x0499, 0x3108, /* Yamaha YIT-W12TX */ QUIRK_FLAG_GET_SAMPLE_RATE), + DEVICE_FLG(0x0c45, 0x6340, /* Sonix HD USB Camera */ + QUIRK_FLAG_GET_SAMPLE_RATE), DEVICE_FLG(0x04d8, 0xfeea, /* Benchmark DAC1 Pre */ QUIRK_FLAG_GET_SAMPLE_RATE), DEVICE_FLG(0x04e8, 0xa051, /* Samsung USBC Headset (AKG) */ -- 2.25.1

2 1

[PATCH v3] ALSA: usb-audio: Fix microphone sound on HD webcam.
by wangdicheng 19 Jul '24

19 Jul '24

From: wangdicheng <wangdicheng(a)kylinos.cn> I own an external usb Webcam, HD webcam, which had low mic volume and inconsistent sound quality. Video works as expected. (snip) [ 95.473820][ 1] [ T73] usb 5-2.2: new high-speed USB device number 7 using xhci_hcd [ 95.773974][ 1] [ T73] usb 5-2.2: New USB device found, idVendor=1bcf, idProduct=2281, bcdDevice= 0.05 [ 95.783445][ 1] [ T73] usb 5-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 95.791872][ 1] [ T73] usb 5-2.2: Product: HD webcam [ 95.797001][ 1] [ T73] usb 5-2.2: Manufacturer: Sunplus IT Co [ 95.802996][ 1] [ T73] usb 5-2.2: SerialNumber: 20200513 [ 96.092610][ 2] [ T3680] usb 5-2.2: Warning! Unlikely big volume range (=4096), cval->res is probably wrong. [ 96.102436][ 2] [ T3680] usb 5-2.2: [5] FU [Mic Capture Volume] ch = 1, val = 0/4096/1 Set up quirk cval->res to 16 for 256 levels, Set GET_SAMPLE_RATE quirk flag to stop trying to get the sample rate. Confirmed that happened anyway later due to the backoff mechanism, After 3 failures. All audio stream on device interfaces share the same values, apart from wMaxPacketSize and tSamFreq : bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 4 bNumEndpoints 1 bInterfaceClass 1 Audio Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 4 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 3 bDelay 1 frames wFormatTag 0x0001 PCM AudioStreaming Interface Descriptor: bLength 11 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 1 bSubframeSize 2 bBitResolution 16 bSamFreqType 1 Discrete tSamFreq[ 0] 48000 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x0064 1x 100 bytes bInterval 4 bRefresh 0 bSynchAddress 0 AudioStreaming Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 0 Undefined wLockDelay 0x0000 (snip) Testing patch provides consistent good sound recording quality and volume range. (snip) [ 95.473820][ 1] [ T73] usb 5-2.2: new high-speed USB device number 7 using xhci_hcd [ 95.773974][ 1] [ T73] usb 5-2.2: New USB device found, idVendor=1bcf, idProduct=2281, bcdDevice= 0.05 [ 95.783445][ 1] [ T73] usb 5-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 95.791872][ 1] [ T73] usb 5-2.2: Product: HD webcam [ 95.797001][ 1] [ T73] usb 5-2.2: Manufacturer: Sunplus IT Co [ 95.802996][ 1] [ T73] usb 5-2.2: SerialNumber: 20200513 [ 96.110630][ 3] [ T3680] usbcore: registered new interface driver snd-usb-audio [ 96.114329][ 7] [ T3677] usb 5-2.2: Found UVC 1.00 device HD webcam (1bcf:2281) [ 96.167555][ 7] [ T3677] usbcore: registered new interface driver uvcvideo Signed-off-by: wangdicheng <wangdicheng(a)kylinos.cn> --- v2 -> v3: make the mail address of Signed-off-by consistent with the From address V1 -> V2: align the space,Update code to v6.8-rc3,and make modifications based on it --- sound/usb/mixer.c | 7 +++++++ sound/usb/quirks.c | 2 ++ 2 files changed, 9 insertions(+) diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index 409fc1164694..d1bdb0b93bda 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -1211,6 +1211,13 @@ static void volume_control_quirks(struct usb_mixer_elem_info *cval, cval->res = 16; } break; + case USB_ID(0x1bcf, 0x2281): /* HD Webcam */ + if (!strcmp(kctl->id.name, "Mic Capture Volume")) { + usb_audio_info(chip, + "set resolution quirk: cval->res = 16\n"); + cval->res = 16; + } + break; } } diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 09712e61c606..f222532d4d43 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -2185,6 +2185,8 @@ static const struct usb_audio_quirk_flags_table quirk_flags_table[] = { QUIRK_FLAG_ALIGN_TRANSFER), DEVICE_FLG(0x534d, 0x2109, /* MacroSilicon MS2109 */ QUIRK_FLAG_ALIGN_TRANSFER), + DEVICE_FLG(0x1bcf, 0x2281, /* HD Webcam */ + QUIRK_FLAG_GET_SAMPLE_RATE), /* Vendor matches */ VENDOR_FLG(0x045e, /* MS Lifecam */ -- 2.25.1

2 1

Help on specifying 'chmap' in asound.conf
by Xinhui Zhou 19 Jul '24

19 Jul '24

Dear all, I am having a question regarding how to specify 'champ' for a plugin. I do not see any examples of this. I tried many ways to specify but failed. As indicated by the link below, I can specify the MAP as a string array. Can someone provide one example on how exactly this [chmap MAP] can be specified? " pcm.name { type cras [chmap MAP] # Provide channel maps; MAP is a string array } " https://www.alsa-project.org/alsa-doc/alsa-lib/pcm_plugins.html I can something like these, but none of these work for me. chmap LFE chmap "LFE" chmap FR,FL,LFE champ "FR,FL,LFE" Thanks! Xinhui,

3 3

[PATCH alsa-utils 1/2] aplaymidi2: Add -a option to pass all UMP packets
by Takashi Iwai 19 Jul '24

19 Jul '24

So far, aplaymidi2 passes the MIDI1/MIDI2 channel voice UMP messages to the target while processing other UMP messages internally. But sometimes we'd like to pass all UMP messages as is and let the receiver processes. This patch adds a new option -a (or --passall) to pass the all UMP packets included in the given MIDI Clip file to the target as-is. Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- seq/aplaymidi2/aplaymidi2.1 | 8 ++++++++ seq/aplaymidi2/aplaymidi2.c | 20 +++++++++++++++----- 2 files changed, 23 insertions(+), 5 deletions(-) diff --git a/seq/aplaymidi2/aplaymidi2.1 b/seq/aplaymidi2/aplaymidi2.1 index fc85943c0d38..681796222914 100644 --- a/seq/aplaymidi2/aplaymidi2.1 +++ b/seq/aplaymidi2/aplaymidi2.1 @@ -67,6 +67,14 @@ Default is 2 seconds. .I \-s, \-\-silent Don't show message texts. +.TP +.I \-a, \-\-passall +Pass all UMP packets as is. + +As default, \fBaplaymidi2\fP passes only MIDI1 and MIDI2 channel voice +messages and process other UMP packets internally. +With this option, it passes all UMP packets to the target. + .SH SEE ALSO pmidi(1) .br diff --git a/seq/aplaymidi2/aplaymidi2.c b/seq/aplaymidi2/aplaymidi2.c index 6a1f21e92444..f5dfdbd91f30 100644 --- a/seq/aplaymidi2/aplaymidi2.c +++ b/seq/aplaymidi2/aplaymidi2.c @@ -21,6 +21,7 @@ static snd_seq_addr_t ports[16]; static int queue; static int end_delay = 2; static int silent; +static int passall; static unsigned int _current_tempo = 50000000; /* default 120 bpm */ static unsigned int tempo_base = 10; @@ -411,6 +412,9 @@ static void play_midi(FILE *file) while ((len = read_ump_packet(file, ump)) > 0) { const snd_ump_msg_hdr_t *h = (snd_ump_msg_hdr_t *)ump; + if (passall) + send_ump(ump, len); + if (h->type == SND_UMP_MSG_TYPE_UTILITY) { const snd_ump_msg_utility_t *uh = (const snd_ump_msg_utility_t *)ump; @@ -448,9 +452,10 @@ static void play_midi(FILE *file) end_clip(); continue; } - } else if (h->type == SND_UMP_MSG_TYPE_MIDI1_CHANNEL_VOICE || - h->type == SND_UMP_MSG_TYPE_DATA || - h->type == SND_UMP_MSG_TYPE_MIDI2_CHANNEL_VOICE) { + } else if (!passall && + (h->type == SND_UMP_MSG_TYPE_MIDI1_CHANNEL_VOICE || + h->type == SND_UMP_MSG_TYPE_DATA || + h->type == SND_UMP_MSG_TYPE_MIDI2_CHANNEL_VOICE)) { send_ump(ump, len); } } @@ -496,7 +501,8 @@ static void usage(const char *argv0) "-V, --version print current version\n" "-p, --port=client:port,... set port(s) to play to\n" "-d, --delay=seconds delay after song ends\n" - "-s, --silent don't show texts\n", + "-s, --silent don't show texts\n" + "-a, --passall pass all UMP packets as-is\n", argv0); } @@ -513,13 +519,14 @@ int main(int argc, char *argv[]) {"port", 1, NULL, 'p'}, {"delay", 1, NULL, 'd'}, {"silent", 0, NULL, 's'}, + {"passall", 0, NULL, 'a'}, {0} }; int c; init_seq(); - while ((c = getopt_long(argc, argv, "hVp:d:s", + while ((c = getopt_long(argc, argv, "hVp:d:sa", long_options, NULL)) != -1) { switch (c) { case 'h': @@ -537,6 +544,9 @@ int main(int argc, char *argv[]) case 's': silent = 1; break; + case 'a': + passall = 1; + break; default: usage(argv[0]); return 1; -- 2.43.0

1 1

[PATCH] ASoC: sof: amd: fix for firmware reload failure in Vangogh platform
by Venkata Prasad Potturu 18 Jul '24

18 Jul '24

Setting ACP ACLK as clock source when ACP enters D0 state causing firmware load failure, as per design clock source should be internal clock. Remove acp_clkmux_sel field so that ACP will use internal clock source when ACP enters into D0 state. Fixes: d0dab6b76a9f ("ASoC: SOF: amd: Add sof support for vangogh platform") Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu(a)amd.com> --- sound/soc/sof/amd/pci-vangogh.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/soc/sof/amd/pci-vangogh.c b/sound/soc/sof/amd/pci-vangogh.c index 16eb2994fbab..eba580840100 100644 --- a/sound/soc/sof/amd/pci-vangogh.c +++ b/sound/soc/sof/amd/pci-vangogh.c @@ -34,7 +34,6 @@ static const struct sof_amd_acp_desc vangogh_chip_info = { .dsp_intr_base = ACP5X_DSP_SW_INTR_BASE, .sram_pte_offset = ACP5X_SRAM_PTE_OFFSET, .hw_semaphore_offset = ACP5X_AXI2DAGB_SEM_0, - .acp_clkmux_sel = ACP5X_CLKMUX_SEL, .probe_reg_offset = ACP5X_FUTURE_REG_ACLK_0, }; -- 2.39.2

2 1

[PATCH v2] ALSA: usb-audio: Fix microphone sound on HD webcam.
by wangdicheng 18 Jul '24

18 Jul '24

I own an external usb Webcam, HD webcam, which had low mic volume and inconsistent sound quality. Video works as expected. (snip) [ 95.473820][ 1] [ T73] usb 5-2.2: new high-speed USB device number 7 using xhci_hcd [ 95.773974][ 1] [ T73] usb 5-2.2: New USB device found, idVendor=1bcf, idProduct=2281, bcdDevice= 0.05 [ 95.783445][ 1] [ T73] usb 5-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 95.791872][ 1] [ T73] usb 5-2.2: Product: HD webcam [ 95.797001][ 1] [ T73] usb 5-2.2: Manufacturer: Sunplus IT Co [ 95.802996][ 1] [ T73] usb 5-2.2: SerialNumber: 20200513 [ 96.092610][ 2] [ T3680] usb 5-2.2: Warning! Unlikely big volume range (=4096), cval->res is probably wrong. [ 96.102436][ 2] [ T3680] usb 5-2.2: [5] FU [Mic Capture Volume] ch = 1, val = 0/4096/1 Set up quirk cval->res to 16 for 256 levels, Set GET_SAMPLE_RATE quirk flag to stop trying to get the sample rate. Confirmed that happened anyway later due to the backoff mechanism, After 3 failures. All audio stream on device interfaces share the same values, apart from wMaxPacketSize and tSamFreq : bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 4 bNumEndpoints 1 bInterfaceClass 1 Audio Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 4 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 3 bDelay 1 frames wFormatTag 0x0001 PCM AudioStreaming Interface Descriptor: bLength 11 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 1 bSubframeSize 2 bBitResolution 16 bSamFreqType 1 Discrete tSamFreq[ 0] 48000 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x0064 1x 100 bytes bInterval 4 bRefresh 0 bSynchAddress 0 AudioStreaming Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 0 Undefined wLockDelay 0x0000 (snip) Testing patch provides consistent good sound recording quality and volume range. (snip) [ 95.473820][ 1] [ T73] usb 5-2.2: new high-speed USB device number 7 using xhci_hcd [ 95.773974][ 1] [ T73] usb 5-2.2: New USB device found, idVendor=1bcf, idProduct=2281, bcdDevice= 0.05 [ 95.783445][ 1] [ T73] usb 5-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 95.791872][ 1] [ T73] usb 5-2.2: Product: HD webcam [ 95.797001][ 1] [ T73] usb 5-2.2: Manufacturer: Sunplus IT Co [ 95.802996][ 1] [ T73] usb 5-2.2: SerialNumber: 20200513 [ 96.110630][ 3] [ T3680] usbcore: registered new interface driver snd-usb-audio [ 96.114329][ 7] [ T3677] usb 5-2.2: Found UVC 1.00 device HD webcam (1bcf:2281) [ 96.167555][ 7] [ T3677] usbcore: registered new interface driver uvcvideo Signed-off-by: wangdicheng <wangdicheng(a)kylinos.cn> --- V1 -> V2: align the space,Update code to v6.8-rc3,and make modifications based on it --- sound/usb/mixer.c | 7 +++++++ sound/usb/quirks.c | 2 ++ 2 files changed, 9 insertions(+) diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index 409fc1164694..d1bdb0b93bda 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -1211,6 +1211,13 @@ static void volume_control_quirks(struct usb_mixer_elem_info *cval, cval->res = 16; } break; + case USB_ID(0x1bcf, 0x2281): /* HD Webcam */ + if (!strcmp(kctl->id.name, "Mic Capture Volume")) { + usb_audio_info(chip, + "set resolution quirk: cval->res = 16\n"); + cval->res = 16; + } + break; } } diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 09712e61c606..f222532d4d43 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -2185,6 +2185,8 @@ static const struct usb_audio_quirk_flags_table quirk_flags_table[] = { QUIRK_FLAG_ALIGN_TRANSFER), DEVICE_FLG(0x534d, 0x2109, /* MacroSilicon MS2109 */ QUIRK_FLAG_ALIGN_TRANSFER), + DEVICE_FLG(0x1bcf, 0x2281, /* HD Webcam */ + QUIRK_FLAG_GET_SAMPLE_RATE), /* Vendor matches */ VENDOR_FLG(0x045e, /* MS Lifecam */ -- 2.25.1

2 1

[PATCH v1] ALSA: hda/tas2781: Add new quirk for Lenovo Hera2 Laptop
by Shenghao Ding 18 Jul '24

18 Jul '24

Add new vendor_id and subsystem_id in quirk for Lenovo Hera2 Laptop. Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 766f0b1d3e9d..bac68a84fd50 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -10539,6 +10539,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x231a, "Thinkpad Z16 Gen2", ALC287_FIXUP_MG_RTKC_CSAMP_CS35L41_I2C_THINKPAD), SND_PCI_QUIRK(0x17aa, 0x231e, "Thinkpad", ALC287_FIXUP_LENOVO_THKPAD_WH_ALC1318), SND_PCI_QUIRK(0x17aa, 0x231f, "Thinkpad", ALC287_FIXUP_LENOVO_THKPAD_WH_ALC1318), + SND_PCI_QUIRK(0x17aa, 0x2326, "Hera2", ALC287_FIXUP_TAS2781_I2C), SND_PCI_QUIRK(0x17aa, 0x30bb, "ThinkCentre AIO", ALC233_FIXUP_LENOVO_LINE2_MIC_HOTKEY), SND_PCI_QUIRK(0x17aa, 0x30e2, "ThinkCentre AIO", ALC233_FIXUP_LENOVO_LINE2_MIC_HOTKEY), SND_PCI_QUIRK(0x17aa, 0x310c, "ThinkCentre Station", ALC294_FIXUP_LENOVO_MIC_LOCATION), -- 2.34.1

2 1

[REGRESSION] ALSA: firewire-lib: snd_pcm_period_elapsed deadlock with Fireface 800
by edmund.raile 18 Jul '24

18 Jul '24

On kernels since 5.14.0, ALSA playback to the FireWire RME Fireface 800 audio interface results in a deadlock involving snd_pcm_period_elapsed(), freezing the system. On kernels 5.0.0 to 5.13.19 the interface works just fine, as it does with the RME driver. Distributions tested: Ubuntu Manjaro Arch Fedora FireWire chipsets tested: LSI FW643 TI XIO2213B Platforms tested: Intel i5 4570 on AsRock H97 Pro4 Intel i5 12600K on MSI MS-7D25 The behavior was also observed on the RME forum: https://forum.rme-audio.de/viewtopic.php?pid=190472#p190472 Shortened traces of 6.10.0-rc7 (Arch linux-mainline): RIP: 0010:tasklet_unlock_spin_wait (./arch/x86/include/asm/bitops.h:206 ./arch/x86/include/asm/bitops.h:238 ./include/asm-generic/bitops/instrumented-non-atomic.h:142 kernel/softirq.c:851) <NMI> ? watchdog_hardlockup_check.cold (kernel/watchdog.c:200) ? __perf_event_overflow (kernel/events/core.c:9737 (discriminator 2)) ? handle_pmi_common (arch/x86/events/intel/core.c:3061 (discriminator 1)) ? intel_pmu_handle_irq (./arch/x86/include/asm/paravirt.h:192 arch/x86/events/intel/core.c:2428 arch/x86/events/intel/core.c:3127) ? perf_event_nmi_handler (arch/x86/events/core.c:1744 arch/x86/events/core.c:1730) ? nmi_handle (arch/x86/kernel/nmi.c:151) ? default_do_nmi (arch/x86/kernel/nmi.c:352 (discriminator 61)) ? exc_nmi (arch/x86/kernel/nmi.c:546) ? end_repeat_nmi (arch/x86/entry/entry_64.S:1408) ? tasklet_unlock_spin_wait (./arch/x86/include/asm/bitops.h:206 ./arch/x86/include/asm/bitops.h:238 ./include/asm-generic/bitops/instrumented-non-atomic.h:142 kernel/softirq.c:851) ? tasklet_unlock_spin_wait (./arch/x86/include/asm/bitops.h:206 ./arch/x86/include/asm/bitops.h:238 ./include/asm-generic/bitops/instrumented-non-atomic.h:142 kernel/softirq.c:851) ? tasklet_unlock_spin_wait (./arch/x86/include/asm/bitops.h:206 ./arch/x86/include/asm/bitops.h:238 ./include/asm-generic/bitops/instrumented-non-atomic.h:142 kernel/softirq.c:851) </NMI> <TASK> ohci_flush_iso_completions (./include/linux/interrupt.h:740 drivers/firewire/ohci.c:3530) firewire_ohci amdtp_domain_stream_pcm_pointer (sound/firewire/amdtp-stream.c:1858) snd_firewire_lib snd_pcm_update_hw_ptr0 (sound/core/pcm_lib.c:304) snd_pcm snd_pcm_status64 (sound/core/pcm_native.c:1034) snd_pcm snd_pcm_status_user64 (./include/linux/uaccess.h:191 sound/core/pcm_native.c:1096) snd_pcm snd_pcm_ioctl (sound/core/pcm_native.c:3401 (discriminator 1)) snd_pcm __x64_sys_ioctl (fs/ioctl.c:51 fs/ioctl.c:907 fs/ioctl.c:893 fs/ioctl.c:893) do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1)) ? snd_pcm_status_user64 (sound/core/pcm_native.c:1096 (discriminator 1)) snd_pcm ? futex_wake (kernel/futex/waitwake.c:173) ? do_futex (kernel/futex/syscalls.c:107 (discriminator 1)) ? __x64_sys_futex (kernel/futex/syscalls.c:179 kernel/futex/syscalls.c:160 kernel/futex/syscalls.c:160) ? syscall_exit_to_user_mode (kernel/entry/common.c:221) ? do_syscall_64 (./arch/x86/include/asm/cpufeature.h:178 arch/x86/entry/common.c:98) ? do_futex (kernel/futex/syscalls.c:107 (discriminator 1)) ? __x64_sys_futex (kernel/futex/syscalls.c:179 kernel/futex/syscalls.c:160 kernel/futex/syscalls.c:160) ? syscall_exit_to_user_mode (kernel/entry/common.c:221) ? do_syscall_64 (./arch/x86/include/asm/cpufeature.h:178 arch/x86/entry/common.c:98) ? syscall_exit_to_user_mode (kernel/entry/common.c:221) ? do_syscall_64 (./arch/x86/include/asm/cpufeature.h:178 arch/x86/entry/common.c:98) ? do_syscall_64 (./arch/x86/include/asm/cpufeature.h:178 arch/x86/entry/common.c:98) ? __irq_exit_rcu (kernel/softirq.c:620 (discriminator 1) kernel/softirq.c:639 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) RIP: 0010:native_queued_spin_lock_slowpath (kernel/locking/qspinlock.c:380 (discriminator 3)) <NMI> ? watchdog_hardlockup_check.cold (kernel/watchdog.c:200) ? __perf_event_overflow (kernel/events/core.c:9737 (discriminator 2)) ? handle_pmi_common (arch/x86/events/intel/core.c:3061 (discriminator 1)) ? intel_pmu_handle_irq (./arch/x86/include/asm/paravirt.h:192 arch/x86/events/intel/core.c:2428 arch/x86/events/intel/core.c:3127) ? perf_event_nmi_handler (arch/x86/events/core.c:1744 arch/x86/events/core.c:1730) ? nmi_handle (arch/x86/kernel/nmi.c:151) ? default_do_nmi (arch/x86/kernel/nmi.c:352 (discriminator 61)) ? exc_nmi (arch/x86/kernel/nmi.c:546) ? end_repeat_nmi (arch/x86/entry/entry_64.S:1408) ? native_queued_spin_lock_slowpath (kernel/locking/qspinlock.c:380 (discriminator 3)) ? native_queued_spin_lock_slowpath (kernel/locking/qspinlock.c:380 (discriminator 3)) ? native_queued_spin_lock_slowpath (kernel/locking/qspinlock.c:380 (discriminator 3)) </NMI> <IRQ> _raw_spin_lock_irqsave (./arch/x86/include/asm/paravirt.h:584 ./arch/x86/include/asm/qspinlock.h:51 ./include/asm-generic/qspinlock.h:114 ./include/linux/spinlock.h:187 ./include/linux/spinlock_api_smp.h:111 kernel/locking/spinlock.c:162) snd_pcm_period_elapsed (sound/core/pcm_lib.c:1905) snd_pcm process_rx_packets (sound/firewire/amdtp-stream.c:1164) snd_firewire_lib irq_target_callback (sound/firewire/amdtp-stream.c:1549) snd_firewire_lib handle_it_packet (drivers/firewire/ohci.c:2786 drivers/firewire/ohci.c:2974) firewire_ohci context_tasklet (drivers/firewire/ohci.c:1127) firewire_ohci tasklet_action_common.isra.0 (kernel/softirq.c:789) handle_softirqs (kernel/softirq.c:554) __irq_exit_rcu (kernel/softirq.c:589 kernel/softirq.c:428 kernel/softirq.c:637) common_interrupt (arch/x86/kernel/irq.c:278 (discriminator 35)) </IRQ> <TASK> asm_common_interrupt (./arch/x86/include/asm/idtentry.h:693) It can be induced by direct ALSA playback to the device: mpv --audio-device=alsa/sysdefault:CARD=Fireface800 Spor-Ignition.flac Time to occurrence ranges from two seconds to 30 minutes. Loading the CPU appears to increase the likelihood: stress --cpu $(nproc) So does switching between applications via workspaces (only tested Xfce). The regression has been traced to these two commits: 7ba5ca32fe6e8d2e153fb5602997336517b34743 b5b519965c4c364ae65c49fe9f11d222dd70a9c2 I am currently testing a simple patch, in essence reverting both commits. Behaves well so far (stable), will likely send it in tomorrow. #regzbot introduced: 7ba5ca32fe6e

2 2

ThinkPad P14s Gen 5 AMD micmute LED is not working sometimes.
by GitHub issues - opened 18 Jul '24

18 Jul '24

alsa-project/alsa-ucm-conf issue #433 was opened from pma1: The mic and sound output works fine. The mute LED works fine. But when press Fn+F4, the mic-mute led is not working sometimes after bootup. The failrate is like 1/10. Tested with latest alsa-ucm from git, it's reproduced. /sys/class/sound/ctl-led/mic/card1# cat list 7 # amixer -c 1 controls numid=12,iface=CARD,name='Headphone Jack' numid=11,iface=CARD,name='Mic Jack' numid=13,iface=CARD,name='Speaker Phantom Jack' numid=10,iface=MIXER,name='Master Playback Switch' numid=9,iface=MIXER,name='Master Playback Volume' numid=2,iface=MIXER,name='Headphone Playback Switch' numid=1,iface=MIXER,name='Headphone Playback Volume' numid=16,iface=MIXER,name='PCM Playback Volume' numid=17,iface=MIXER,name='Mic ACP LED Capture Switch' numid=8,iface=MIXER,name='Mic Boost Volume' numid=7,iface=MIXER,name='Capture Switch' numid=6,iface=MIXER,name='Capture Volume' numid=5,iface=MIXER,name='Auto-Mute Mode' numid=4,iface=MIXER,name='Speaker Playback Switch' numid=3,iface=MIXER,name='Speaker Playback Volume' numid=15,iface=PCM,name='Capture Channel Map' numid=14,iface=PCM,name='Playback Channel Map' # echo 'Capture Switch' > detach # echo 'Mic ACP LED Capture Switch' > attach /sys/class/sound/ctl-led/mic/card1# cat list 17 Then the micmute LED will work. [alsa-info-amd-micmutled.txt](https://github.com/user-attachments/files/1627… Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/433 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Inconsistent order of channels on C-Media 7.1 channel device
by victor＠allumeenergy.com.au 18 Jul '24

18 Jul '24

I have a USB sound device (Startech ICUSBAUDIO7D, which comes up as `ID 0d8c:0102 C-Media Electronics, Inc. CM106 Like Sound Device` through lsusb) which I'm trying to program the output of for 8 channels. The python code (outputs a 50Hz sine wave) I'm using is below (each channel gets a different amplitude so I can identify them with an oscilloscope). The sound card has 4 stereo jacks, to which I have a scope connected. The problem is that on different runs of the program, the output mappings are not consistent - each run of the program might have the order of the channels different to the previous. So running it one time might have amplitudes (0, 0.125) on the first jack, but the next run it might have those (0.75, 0.25) on the first jack (it doesn't appear to be 'paired' per jack) I initially discovered this when using portaudio, and decided to try using alsa-only and the issue persists. Is this likely to be a problem with the driver, alsa-lib, or is there something else going on here? ``` import numpy as np import alsaaudio def sine_wave(amplitude=1, freq=50, sample_rate=48000): wave_len = sample_rate/freq samples = (amplitude * 32767 * np.sin(2 * np.pi * np.arange(wave_len) * freq / sample_rate)).astype(np.int16) return samples def eightchan(freq=50, sample_rate=48000): wave_len = sample_rate//freq frames = np.zeros((wave_len, 8), dtype=np.int16) samples = sine_wave() for c in range(8): frames[:wave_len,c] = samples[:wave_len]*(c/8) return frames.tobytes() if __name__ == '__main__': pcm = alsaaudio.PCM(device='surround71:CARD=ICUSBAUDIO7D,DEV=0', format=alsaaudio.PCM_FORMAT_S16_LE, channels=8, rate=48000, type=alsaaudio.PCM_PLAYBACK, periodsize=960, periods=1) frames = eightchan() while True: pcm.write(frames) ``` alsa-info output is attached [alsa-info.txt](https://github.com/user-attachments/files/16277691/alsa-info…

1 1

Inconsistent order of channels on C-Media 7.1 channel device
by GitHub issues - opened 18 Jul '24

18 Jul '24

alsa-project/alsa-lib issue #402 was opened from victorallume: I have a USB sound device (Startech ICUSBAUDIO7D, which comes up as `ID 0d8c:0102 C-Media Electronics, Inc. CM106 Like Sound Device` through lsusb) which I'm trying to program the output of for 8 channels. The python code (outputs a 50Hz sine wave) I'm using is below (each channel gets a different amplitude so I can identify them with an oscilloscope). The sound card has 4 stereo jacks, to which I have a scope connected. The problem is that on different runs of the program, the output mappings are not consistent - each run of the program might have the order of the channels different to the previous. So running it one time might have amplitudes (0, 0.125) on the first jack, but the next run it might have those (0.75, 0.25) on the first jack (it doesn't appear to be 'paired' per jack) I initially discovered this when using portaudio, and decided to try using alsa-only and the issue persists. Is this likely to be a problem with the driver, alsa-lib, or is there something else going on here? ``` import numpy as np import alsaaudio def sine_wave(amplitude=1, freq=50, sample_rate=48000): wave_len = sample_rate/freq samples = (amplitude * 32767 * np.sin(2 * np.pi * np.arange(wave_len) * freq / sample_rate)).astype(np.int16) return samples def eightchan(freq=50, sample_rate=48000): wave_len = sample_rate//freq frames = np.zeros((wave_len, 8), dtype=np.int16) samples = sine_wave() for c in range(8): frames[:wave_len,c] = samples[:wave_len]*(c/8) return frames.tobytes() if __name__ == '__main__': pcm = alsaaudio.PCM(device='surround71:CARD=ICUSBAUDIO7D,DEV=0', format=alsaaudio.PCM_FORMAT_S16_LE, channels=8, rate=48000, type=alsaaudio.PCM_PLAYBACK, periodsize=960, periods=1) frames = eightchan() while True: pcm.write(frames) ``` alsa-info output is attached [alsa-info.txt](https://github.com/user-attachments/files/16277691/alsa-info… Issue URL : https://github.com/alsa-project/alsa-lib/issues/402 Repository URL: https://github.com/alsa-project/alsa-lib

1 0

[PATCH] ALSA: usb-audio: Fix microphone sound on HD webcam.
by wangdicheng 17 Jul '24

17 Jul '24

I own an external usb Webcam, HD webcam, which had low mic volume and inconsistent sound quality. Video works as expected. (snip) [ 95.473820][ 1] [ T73] usb 5-2.2: new high-speed USB device number 7 using xhci_hcd [ 95.773974][ 1] [ T73] usb 5-2.2: New USB device found, idVendor=1bcf, idProduct=2281, bcdDevice= 0.05 [ 95.783445][ 1] [ T73] usb 5-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 95.791872][ 1] [ T73] usb 5-2.2: Product: HD webcam [ 95.797001][ 1] [ T73] usb 5-2.2: Manufacturer: Sunplus IT Co [ 95.802996][ 1] [ T73] usb 5-2.2: SerialNumber: 20200513 [ 96.092610][ 2] [ T3680] usb 5-2.2: Warning! Unlikely big volume range (=4096), cval->res is probably wrong. [ 96.102436][ 2] [ T3680] usb 5-2.2: [5] FU [Mic Capture Volume] ch = 1, val = 0/4096/1 Set up quirk cval->res to 16 for 256 levels, Set GET_SAMPLE_RATE quirk flag to stop trying to get the sample rate. Confirmed that happened anyway later due to the backoff mechanism, After 3 failures. All audio stream on device interfaces share the same values, apart from wMaxPacketSize and tSamFreq : bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 4 bNumEndpoints 1 bInterfaceClass 1 Audio Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 4 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 3 bDelay 1 frames wFormatTag 0x0001 PCM AudioStreaming Interface Descriptor: bLength 11 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 1 bSubframeSize 2 bBitResolution 16 bSamFreqType 1 Discrete tSamFreq[ 0] 48000 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x0064 1x 100 bytes bInterval 4 bRefresh 0 bSynchAddress 0 AudioStreaming Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 0 Undefined wLockDelay 0x0000 (snip) Testing patch provides consistent good sound recording quality and volume range. (snip) [ 95.473820][ 1] [ T73] usb 5-2.2: new high-speed USB device number 7 using xhci_hcd [ 95.773974][ 1] [ T73] usb 5-2.2: New USB device found, idVendor=1bcf, idProduct=2281, bcdDevice= 0.05 [ 95.783445][ 1] [ T73] usb 5-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 95.791872][ 1] [ T73] usb 5-2.2: Product: HD webcam [ 95.797001][ 1] [ T73] usb 5-2.2: Manufacturer: Sunplus IT Co [ 95.802996][ 1] [ T73] usb 5-2.2: SerialNumber: 20200513 [ 96.110630][ 3] [ T3680] usbcore: registered new interface driver snd-usb-audio [ 96.114329][ 7] [ T3677] usb 5-2.2: Found UVC 1.00 device HD webcam (1bcf:2281) [ 96.167555][ 7] [ T3677] usbcore: registered new interface driver uvcvideo Signed-off-by: wangdicheng <wangdicheng(a)kylinos.cn> --- v2 -> v3: Update code to v6.8-rc3,and make modifications based on it V1 -> V2: align the space --- sound/usb/mixer.c | 7 +++++++ sound/usb/quirks.c | 2 ++ 2 files changed, 9 insertions(+) diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index 409fc1164694..d1bdb0b93bda 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -1211,6 +1211,13 @@ static void volume_control_quirks(struct usb_mixer_elem_info *cval, cval->res = 16; } break; + case USB_ID(0x1bcf, 0x2281): /* HD Webcam */ + if (!strcmp(kctl->id.name, "Mic Capture Volume")) { + usb_audio_info(chip, + "set resolution quirk: cval->res = 16\n"); + cval->res = 16; + } + break; } } diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 09712e61c606..f222532d4d43 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -2185,6 +2185,8 @@ static const struct usb_audio_quirk_flags_table quirk_flags_table[] = { QUIRK_FLAG_ALIGN_TRANSFER), DEVICE_FLG(0x534d, 0x2109, /* MacroSilicon MS2109 */ QUIRK_FLAG_ALIGN_TRANSFER), + DEVICE_FLG(0x1bcf, 0x2281, /* HD Webcam */ + QUIRK_FLAG_GET_SAMPLE_RATE), /* Vendor matches */ VENDOR_FLG(0x045e, /* MS Lifecam */ -- 2.25.1

1 0

[PATCH] ALSA: usb-audio: Fix microphone sound on HD webcam.
by wangdicheng 17 Jul '24

17 Jul '24

From: wangdicheng <wangdicheng(a)kylinos.cn> I own an external usb Webcam, HD webcam, which had low mic volume and inconsistent sound quality. Video works as expected. (snip) [ 95.473820][ 1] [ T73] usb 5-2.2: new high-speed USB device number 7 using xhci_hcd [ 95.773974][ 1] [ T73] usb 5-2.2: New USB device found, idVendor=1bcf, idProduct=2281, bcdDevice= 0.05 [ 95.783445][ 1] [ T73] usb 5-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 95.791872][ 1] [ T73] usb 5-2.2: Product: HD webcam [ 95.797001][ 1] [ T73] usb 5-2.2: Manufacturer: Sunplus IT Co [ 95.802996][ 1] [ T73] usb 5-2.2: SerialNumber: 20200513 [ 96.092610][ 2] [ T3680] usb 5-2.2: Warning! Unlikely big volume range (=4096), cval->res is probably wrong. [ 96.102436][ 2] [ T3680] usb 5-2.2: [5] FU [Mic Capture Volume] ch = 1, val = 0/4096/1 Set up quirk cval->res to 16 for 256 levels, Set GET_SAMPLE_RATE quirk flag to stop trying to get the sample rate. Confirmed that happened anyway later due to the backoff mechanism, After 3 failures. All audio stream on device interfaces share the same values, apart from wMaxPacketSize and tSamFreq : bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 4 bNumEndpoints 1 bInterfaceClass 1 Audio Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 4 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 3 bDelay 1 frames wFormatTag 0x0001 PCM AudioStreaming Interface Descriptor: bLength 11 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 1 bSubframeSize 2 bBitResolution 16 bSamFreqType 1 Discrete tSamFreq[ 0] 48000 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x0064 1x 100 bytes bInterval 4 bRefresh 0 bSynchAddress 0 AudioStreaming Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 0 Undefined wLockDelay 0x0000 (snip) Testing patch provides consistent good sound recording quality and volume range. (snip) [ 95.473820][ 1] [ T73] usb 5-2.2: new high-speed USB device number 7 using xhci_hcd [ 95.773974][ 1] [ T73] usb 5-2.2: New USB device found, idVendor=1bcf, idProduct=2281, bcdDevice= 0.05 [ 95.783445][ 1] [ T73] usb 5-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 95.791872][ 1] [ T73] usb 5-2.2: Product: HD webcam [ 95.797001][ 1] [ T73] usb 5-2.2: Manufacturer: Sunplus IT Co [ 95.802996][ 1] [ T73] usb 5-2.2: SerialNumber: 20200513 [ 96.110630][ 3] [ T3680] usbcore: registered new interface driver snd-usb-audio [ 96.114329][ 7] [ T3677] usb 5-2.2: Found UVC 1.00 device HD webcam (1bcf:2281) [ 96.167555][ 7] [ T3677] usbcore: registered new interface driver uvcvideo Signed-off-by: wangdicheng <wangdicheng(a)kylinos.cn> --- V1 -> V2: align the space --- sound/usb/mixer.c | 7 +++++++ sound/usb/quirks.c | 2 ++ 2 files changed, 9 insertions(+) diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index 409fc1164694..d1bdb0b93bda 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -1211,6 +1211,13 @@ static void volume_control_quirks(struct usb_mixer_elem_info *cval, cval->res = 16; } break; + case USB_ID(0x1bcf, 0x2281): /* HD Webcam */ + if (!strcmp(kctl->id.name, "Mic Capture Volume")) { + usb_audio_info(chip, + "set resolution quirk: cval->res = 16\n"); + cval->res = 16; + } + break; } } diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 4e64842245e1..7cd13e4fda4f 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -2179,6 +2179,8 @@ static const struct usb_audio_quirk_flags_table quirk_flags_table[] = { QUIRK_FLAG_FIXED_RATE), DEVICE_FLG(0x1bcf, 0x2283, /* NexiGo N930AF FHD Webcam */ QUIRK_FLAG_GET_SAMPLE_RATE), + DEVICE_FLG(0x1bcf, 0x2281, /* HD Webcam */ + QUIRK_FLAG_GET_SAMPLE_RATE), /* Vendor matches */ VENDOR_FLG(0x045e, /* MS Lifecam */ -- 2.25.1

2 1

[PATCH] ALSA: usb-audio: Fix microphone sound on HD webcam.
by wangdicheng 17 Jul '24

17 Jul '24

From: wangdicheng <wangdicheng(a)kylinos.cn> I own an external usb Webcam, HD webcam, which had low mic volume and inconsistent sound quality. Video works as expected. (snip) [ 95.473820][ 1] [ T73] usb 5-2.2: new high-speed USB device number 7 using xhci_hcd [ 95.773974][ 1] [ T73] usb 5-2.2: New USB device found, idVendor=1bcf, idProduct=2281, bcdDevice= 0.05 [ 95.783445][ 1] [ T73] usb 5-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 95.791872][ 1] [ T73] usb 5-2.2: Product: HD webcam [ 95.797001][ 1] [ T73] usb 5-2.2: Manufacturer: Sunplus IT Co [ 95.802996][ 1] [ T73] usb 5-2.2: SerialNumber: 20200513 [ 96.092610][ 2] [ T3680] usb 5-2.2: Warning! Unlikely big volume range (=4096), cval->res is probably wrong. [ 96.102436][ 2] [ T3680] usb 5-2.2: [5] FU [Mic Capture Volume] ch = 1, val = 0/4096/1 Set up quirk cval->res to 16 for 256 levels, Set GET_SAMPLE_RATE quirk flag to stop trying to get the sample rate. Confirmed that happened anyway later due to the backoff mechanism, After 3 failures. All audio stream on device interfaces share the same values, apart from wMaxPacketSize and tSamFreq : bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 4 bNumEndpoints 1 bInterfaceClass 1 Audio Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 4 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 3 bDelay 1 frames wFormatTag 0x0001 PCM AudioStreaming Interface Descriptor: bLength 11 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 1 bSubframeSize 2 bBitResolution 16 bSamFreqType 1 Discrete tSamFreq[ 0] 48000 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x0064 1x 100 bytes bInterval 4 bRefresh 0 bSynchAddress 0 AudioStreaming Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 0 Undefined wLockDelay 0x0000 (snip) Testing patch provides consistent good sound recording quality and volume range. (snip) [ 95.473820][ 1] [ T73] usb 5-2.2: new high-speed USB device number 7 using xhci_hcd [ 95.773974][ 1] [ T73] usb 5-2.2: New USB device found, idVendor=1bcf, idProduct=2281, bcdDevice= 0.05 [ 95.783445][ 1] [ T73] usb 5-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 95.791872][ 1] [ T73] usb 5-2.2: Product: HD webcam [ 95.797001][ 1] [ T73] usb 5-2.2: Manufacturer: Sunplus IT Co [ 95.802996][ 1] [ T73] usb 5-2.2: SerialNumber: 20200513 [ 96.110630][ 3] [ T3680] usbcore: registered new interface driver snd-usb-audio [ 96.114329][ 7] [ T3677] usb 5-2.2: Found UVC 1.00 device HD webcam (1bcf:2281) [ 96.167555][ 7] [ T3677] usbcore: registered new interface driver uvcvideo Signed-off-by: wangdicheng <wangdicheng(a)kylinos.cn> --- V1 -> V2: align the space --- sound/usb/mixer.c | 7 +++++++ sound/usb/quirks.c | 2 ++ 2 files changed, 9 insertions(+) diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index 409fc1164694..d1bdb0b93bda 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -1211,6 +1211,13 @@ static void volume_control_quirks(struct usb_mixer_elem_info *cval, cval->res = 16; } break; + case USB_ID(0x1bcf, 0x2281): /* HD Webcam */ + if (!strcmp(kctl->id.name, "Mic Capture Volume")) { + usb_audio_info(chip, + "set resolution quirk: cval->res = 16\n"); + cval->res = 16; + } + break; } } diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 4e64842245e1..7cd13e4fda4f 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -2179,6 +2179,8 @@ static const struct usb_audio_quirk_flags_table quirk_flags_table[] = { QUIRK_FLAG_FIXED_RATE), DEVICE_FLG(0x1bcf, 0x2283, /* NexiGo N930AF FHD Webcam */ QUIRK_FLAG_GET_SAMPLE_RATE), + DEVICE_FLG(0x1bcf, 0x2281, /* HD Webcam */ + QUIRK_FLAG_GET_SAMPLE_RATE), /* Vendor matches */ VENDOR_FLG(0x045e, /* MS Lifecam */ -- 2.25.1

1 0

[PATCH] ALSA: pcm_dmaengine: Don't synchronize DMA channel when DMA is paused
by Shengjiu Wang 17 Jul '24

17 Jul '24

When suspended, the DMA channel may enter PAUSE state if dmaengine_pause() is supported by DMA. At this state, dmaengine_synchronize() should not be called, otherwise the DMA channel can't be resumed successfully. Fixes: e8343410ddf0 ("ALSA: dmaengine: Synchronize dma channel after drop()") Signed-off-by: Shengjiu Wang <shengjiu.wang(a)nxp.com> --- sound/core/pcm_dmaengine.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/sound/core/pcm_dmaengine.c b/sound/core/pcm_dmaengine.c index b54336d4bffc..b134a51b3fd5 100644 --- a/sound/core/pcm_dmaengine.c +++ b/sound/core/pcm_dmaengine.c @@ -352,8 +352,12 @@ EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_open_request_chan); int snd_dmaengine_pcm_sync_stop(struct snd_pcm_substream *substream) { struct dmaengine_pcm_runtime_data *prtd = substream_to_prtd(substream); + struct dma_tx_state state; + enum dma_status status; - dmaengine_synchronize(prtd->dma_chan); + status = dmaengine_tx_status(prtd->dma_chan, prtd->cookie, &state); + if (status != DMA_PAUSED) + dmaengine_synchronize(prtd->dma_chan); return 0; } -- 2.34.1

2 1

Re: [PATCH] ALSA: usb-audio: Fix microphone sound on HD webcam.
by Takashi Iwai 17 Jul '24

17 Jul '24

On Wed, 17 Jul 2024 09:51:49 +0200, wangdicheng wrote: > > From: wangdicheng <wangdicheng(a)kylinos.cn> > > I own an external usb Webcam, HD webcam, which had low mic volume and > inconsistent sound quality. Video works as expected. > > (snip) > [ 95.473820][ 1] [ T73] usb 5-2.2: new high-speed USB device number 7 using xhci_hcd > [ 95.773974][ 1] [ T73] usb 5-2.2: New USB device found, idVendor=1bcf, idProduct=2281, bcdDevice= 0.05 > [ 95.783445][ 1] [ T73] usb 5-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > [ 95.791872][ 1] [ T73] usb 5-2.2: Product: HD webcam > [ 95.797001][ 1] [ T73] usb 5-2.2: Manufacturer: Sunplus IT Co > [ 95.802996][ 1] [ T73] usb 5-2.2: SerialNumber: 20200513 > [ 96.092610][ 2] [ T3680] usb 5-2.2: Warning! Unlikely big volume range (=4096), cval->res is probably wrong. > [ 96.102436][ 2] [ T3680] usb 5-2.2: [5] FU [Mic Capture Volume] ch = 1, val = 0/4096/1 > > Set up quirk cval->res to 16 for 256 levels, > Set GET_SAMPLE_RATE quirk flag to stop trying to get the sample rate. > Confirmed that happened anyway later due to the backoff mechanism, > After 3 failures. > > All audio stream on device interfaces share the same values, > apart from wMaxPacketSize and tSamFreq : > > bLength 9 > bDescriptorType 4 > bInterfaceNumber 3 > bAlternateSetting 4 > bNumEndpoints 1 > bInterfaceClass 1 Audio > > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 3 > bAlternateSetting 4 > bNumEndpoints 1 > bInterfaceClass 1 Audio > bInterfaceSubClass 2 Streaming > bInterfaceProtocol 0 > iInterface 0 > AudioStreaming Interface Descriptor: > bLength 7 > bDescriptorType 36 > bDescriptorSubtype 1 (AS_GENERAL) > bTerminalLink 3 > bDelay 1 frames > wFormatTag 0x0001 PCM > AudioStreaming Interface Descriptor: > bLength 11 > bDescriptorType 36 > bDescriptorSubtype 2 (FORMAT_TYPE) > bFormatType 1 (FORMAT_TYPE_I) > bNrChannels 1 > bSubframeSize 2 > bBitResolution 16 > bSamFreqType 1 Discrete > tSamFreq[ 0] 48000 > Endpoint Descriptor: > bLength 9 > bDescriptorType 5 > bEndpointAddress 0x86 EP 6 IN > bmAttributes 5 > Transfer Type Isochronous > Synch Type Asynchronous > Usage Type Data > wMaxPacketSize 0x0064 1x 100 bytes > bInterval 4 > bRefresh 0 > bSynchAddress 0 > AudioStreaming Endpoint Descriptor: > bLength 7 > bDescriptorType 37 > bDescriptorSubtype 1 (EP_GENERAL) > bmAttributes 0x01 > Sampling Frequency > bLockDelayUnits 0 Undefined > wLockDelay 0x0000 > (snip) > > Testing patch provides consistent good sound recording quality and volume range. > > (snip) > [ 95.473820][ 1] [ T73] usb 5-2.2: new high-speed USB device number 7 using xhci_hcd > [ 95.773974][ 1] [ T73] usb 5-2.2: New USB device found, idVendor=1bcf, idProduct=2281, bcdDevice= 0.05 > [ 95.783445][ 1] [ T73] usb 5-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > [ 95.791872][ 1] [ T73] usb 5-2.2: Product: HD webcam > [ 95.797001][ 1] [ T73] usb 5-2.2: Manufacturer: Sunplus IT Co > [ 95.802996][ 1] [ T73] usb 5-2.2: SerialNumber: 20200513 > [ 96.110630][ 3] [ T3680] usbcore: registered new interface driver snd-usb-audio > [ 96.114329][ 7] [ T3677] usb 5-2.2: Found UVC 1.00 device HD webcam (1bcf:2281) > [ 96.167555][ 7] [ T3677] usbcore: registered new interface driver uvcvideo > > Signed-off-by: wangdicheng <wangdicheng(a)kylinos.cn> The patch can't be applied cleanly to the latest tree, as the table has been sorted. Could you rebase and resubmit? Also a nitpicking: > --- a/sound/usb/quirks.c > +++ b/sound/usb/quirks.c > @@ -2179,6 +2179,8 @@ static const struct usb_audio_quirk_flags_table quirk_flags_table[] = { > QUIRK_FLAG_FIXED_RATE), > DEVICE_FLG(0x1bcf, 0x2283, /* NexiGo N930AF FHD Webcam */ > QUIRK_FLAG_GET_SAMPLE_RATE), > + DEVICE_FLG(0x1bcf, 0x2281, /* FHD Webcam */ > + QUIRK_FLAG_GET_SAMPLE_RATE), Please try to align the space. thanks, Takashi

1 0

[PATCH] ASoC: Intel: Fix RT5650 SSP lookup
by Pierre-Louis Bossart 16 Jul '24

16 Jul '24

From: Curtis Malainey <cujomalainey(a)chromium.org> Commit 8efcd4864652 ("ASoC: Intel: sof_rt5682: use common module for sof_card_private initialization") migrated the pin assignment in the context struct up to soc-acpi-intel-ssp-common.c. This uses a lookup table to see if a device has a amp/codec before assigning the pin. The issue here arises when combination parts that serve both (with 2 ports) are used. sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:1f.3/adl_rt5682_def/SSP0-Codec' CPU: 1 PID: 2079 Comm: udevd Tainted: G U 6.6.36-03391-g744739e00023 #1 3be1a2880a0970f65545a957db7d08ef4b3e2c0d Hardware name: Google Anraggar/Anraggar, BIOS Google_Anraggar.15217.552.0 05/07/2024 Call Trace: <TASK> dump_stack_lvl+0x69/0xa0 sysfs_warn_dup+0x5b/0x70 sysfs_create_dir_ns+0xb0/0x100 kobject_add_internal+0x133/0x3c0 kobject_add+0x66/0xb0 ? device_add+0x65/0x780 device_add+0x164/0x780 snd_soc_add_pcm_runtimes+0x2fa/0x800 snd_soc_bind_card+0x35e/0xc20 devm_snd_soc_register_card+0x48/0x90 platform_probe+0x7b/0xb0 really_probe+0xf7/0x2a0 ... kobject: kobject_add_internal failed for SSP0-Codec with -EEXIST, don't try to register things with the same name in the same directory. The issue is that the ALC5650 was only defined in the codec table and not the amp table which left the pin unassigned but the dai link was still created by the machine driver. Also patch the suffix filename code for the topology to prevent double suffix names as a result of this change. Fixes: 8efcd4864652 ("ASoC: Intel: sof_rt5682: use common module for sof_card_private initialization") Reviewed-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Signed-off-by: Curtis Malainey <cujomalainey(a)chromium.org> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> --- .../intel/common/soc-acpi-intel-ssp-common.c | 9 ++++ sound/soc/sof/intel/hda.c | 49 ++++++++++--------- 2 files changed, 34 insertions(+), 24 deletions(-) diff --git a/sound/soc/intel/common/soc-acpi-intel-ssp-common.c b/sound/soc/intel/common/soc-acpi-intel-ssp-common.c index 75d0b931d895..de7a3f7f47f1 100644 --- a/sound/soc/intel/common/soc-acpi-intel-ssp-common.c +++ b/sound/soc/intel/common/soc-acpi-intel-ssp-common.c @@ -64,6 +64,15 @@ static const struct codec_map amps[] = { CODEC_MAP_ENTRY("RT1015P", "rt1015", RT1015P_ACPI_HID, CODEC_RT1015P), CODEC_MAP_ENTRY("RT1019P", "rt1019", RT1019P_ACPI_HID, CODEC_RT1019P), CODEC_MAP_ENTRY("RT1308", "rt1308", RT1308_ACPI_HID, CODEC_RT1308), + + /* + * Monolithic components + * + * Only put components that can serve as both the amp and the codec below this line. + * This will ensure that if the part is used just as a codec and there is an amp as well + * then the amp will be selected properly. + */ + CODEC_MAP_ENTRY("RT5650", "rt5650", RT5650_ACPI_HID, CODEC_RT5650), }; enum snd_soc_acpi_intel_codec diff --git a/sound/soc/sof/intel/hda.c b/sound/soc/sof/intel/hda.c index daf364f773dd..5a40b8fbbbd3 100644 --- a/sound/soc/sof/intel/hda.c +++ b/sound/soc/sof/intel/hda.c @@ -1307,9 +1307,10 @@ struct snd_soc_acpi_mach *hda_machine_select(struct snd_sof_dev *sdev) const struct sof_dev_desc *desc = sof_pdata->desc; struct hdac_bus *bus = sof_to_bus(sdev); struct snd_soc_acpi_mach *mach = NULL; - enum snd_soc_acpi_intel_codec codec_type; + enum snd_soc_acpi_intel_codec codec_type, amp_type; const char *tplg_filename; const char *tplg_suffix; + bool amp_name_valid; /* Try I2S or DMIC if it is supported */ if (interface_mask & (BIT(SOF_DAI_INTEL_SSP) | BIT(SOF_DAI_INTEL_DMIC))) @@ -1413,30 +1414,30 @@ struct snd_soc_acpi_mach *hda_machine_select(struct snd_sof_dev *sdev) } } - codec_type = snd_soc_acpi_intel_detect_amp_type(sdev->dev); - - if (tplg_fixup && - mach->tplg_quirk_mask & SND_SOC_ACPI_TPLG_INTEL_AMP_NAME && - codec_type != CODEC_NONE) { - tplg_suffix = snd_soc_acpi_intel_get_amp_tplg_suffix(codec_type); - if (!tplg_suffix) { - dev_err(sdev->dev, "no tplg suffix found, amp %d\n", - codec_type); - return NULL; - } - - tplg_filename = devm_kasprintf(sdev->dev, GFP_KERNEL, - "%s-%s", - sof_pdata->tplg_filename, - tplg_suffix); - if (!tplg_filename) - return NULL; - - sof_pdata->tplg_filename = tplg_filename; - add_extension = true; - } - + amp_type = snd_soc_acpi_intel_detect_amp_type(sdev->dev); codec_type = snd_soc_acpi_intel_detect_codec_type(sdev->dev); + amp_name_valid = amp_type != CODEC_NONE && amp_type != codec_type; + + if (tplg_fixup && amp_name_valid && + mach->tplg_quirk_mask & SND_SOC_ACPI_TPLG_INTEL_AMP_NAME) { + tplg_suffix = snd_soc_acpi_intel_get_amp_tplg_suffix(amp_type); + if (!tplg_suffix) { + dev_err(sdev->dev, "no tplg suffix found, amp %d\n", + amp_type); + return NULL; + } + + tplg_filename = devm_kasprintf(sdev->dev, GFP_KERNEL, + "%s-%s", + sof_pdata->tplg_filename, + tplg_suffix); + if (!tplg_filename) + return NULL; + + sof_pdata->tplg_filename = tplg_filename; + add_extension = true; + } + if (tplg_fixup && mach->tplg_quirk_mask & SND_SOC_ACPI_TPLG_INTEL_CODEC_NAME && -- 2.43.0

2 1

[PATCH] ASOC: SOF: Intel: hda-loader: only wait for HDaudio IOC for IPC4 devices
by Pierre-Louis Bossart 16 Jul '24

16 Jul '24

Multiple users report a regression bisected to commit d5263dbbd8af ("ASoC: SOF: Intel: don't ignore IOC interrupts for non-audio transfers"). The firmware version is the likely suspect, as these users relied on SOF 2.0 while Intel only tested with the 2.2 release. Rather than completely disable the wait_for_completion(), which can help us gather timing information on the different stages of the boot process, the simplest course of action is to just disable it for older IPC versions which are no longer under active development. Closes: https://github.com/thesofproject/linux/issues/5072 Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218961 Fixes: d5263dbbd8af ("ASoC: SOF: Intel: don't ignore IOC interrupts for non-audio transfers") Tested-by: Mike Krinkin <krinkin.m.u(a)gmail.com> Tested-by: Todd Brandt <todd.e.brandt(a)linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> --- sound/soc/sof/intel/hda-loader.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) diff --git a/sound/soc/sof/intel/hda-loader.c b/sound/soc/sof/intel/hda-loader.c index b8b914eaf7e0..75f6240cf3e1 100644 --- a/sound/soc/sof/intel/hda-loader.c +++ b/sound/soc/sof/intel/hda-loader.c @@ -310,15 +310,19 @@ int hda_cl_copy_fw(struct snd_sof_dev *sdev, struct hdac_ext_stream *hext_stream return ret; } - /* Wait for completion of transfer */ - time_left = wait_for_completion_timeout(&hda_stream->ioc, - msecs_to_jiffies(HDA_CL_DMA_IOC_TIMEOUT_MS)); + if (sdev->pdata->ipc_type == SOF_IPC_TYPE_4) { + /* Wait for completion of transfer */ + time_left = wait_for_completion_timeout(&hda_stream->ioc, + msecs_to_jiffies(HDA_CL_DMA_IOC_TIMEOUT_MS)); - if (!time_left) { - dev_err(sdev->dev, "Code loader DMA did not complete\n"); - return -ETIMEDOUT; + if (!time_left) { + dev_err(sdev->dev, "Code loader DMA did not complete\n"); + return -ETIMEDOUT; + } + dev_dbg(sdev->dev, "Code loader DMA done\n"); } - dev_dbg(sdev->dev, "Code loader DMA done, waiting for FW_ENTERED status\n"); + + dev_dbg(sdev->dev, "waiting for FW_ENTERED status\n"); status = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR, chip->rom_status_reg, reg, -- 2.43.0

2 1

[PATCH v1 1/2] ASoc: tas2781: Add TAS2563 into the Header
by Shenghao Ding 15 Jul '24

15 Jul '24

Add TAS2563 into the Header in case of misunderstanding. Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- v1: - Add TAS2563 into the Header - Add channel no into the log for error debug --- sound/soc/codecs/tas2781-comlib.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/tas2781-comlib.c b/sound/soc/codecs/tas2781-comlib.c index 1fbf4560f5cc..58abbc098a91 100644 --- a/sound/soc/codecs/tas2781-comlib.c +++ b/sound/soc/codecs/tas2781-comlib.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 // -// TAS2781 Common functions for HDA and ASoC Audio drivers +// TAS2563/TAS2781 Common functions for HDA and ASoC Audio drivers // // Copyright 2023 - 2024 Texas Instruments, Inc. // @@ -64,8 +64,8 @@ static int tasdevice_change_chn_book(struct tasdevice_priv *tas_priv, */ ret = regmap_write(map, TASDEVICE_PAGE_SELECT, 0); if (ret < 0) { - dev_err(tas_priv->dev, "%s, E=%d\n", - __func__, ret); + dev_err(tas_priv->dev, "%s, E=%d channel:%d\n", + __func__, ret, chn); goto out; } } -- 2.34.1

2 3

[GIT PULL] ASoC updates for v6.11
by Mark Brown 15 Jul '24

15 Jul '24

The following changes since commit 680e126ec0400f6daecf0510c5bb97a55779ff03: firmware: cs_dsp: Use strnlen() on name fields in V1 wmfw files (2024-07-08 15:55:11 +0100) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git tags/asoc-v6.11 for you to fetch changes up to c51cba4755609ad97ba97713210c16f043c73224: Fix the unbalanced pm_runtime_enable in wcd937x-sdw (2024-07-12 17:38:18 +0100) ---------------------------------------------------------------- ASoC: Updates for for v6.11 There are a lot of changes in here, though the big bulk of things is cleanups and simplifications of various kinds which are internally rather than externally visible. A good chunk of those are DT schema conversions, but there's also a lot of changes in the code. Highlights: - Syncing of features between simple-audio-card and the two audio-graph cards so there is no reason to stick with an older driver. - Support for specifying the order of operations for components within cards to allow quirking for unusual systems. - New support for Asahi Kasei AK4619, Cirrus Logic CS530x, Everest Semiconductors ES8311, NXP i.MX95 and LPC32xx, Qualcomm LPASS v2.5 and WCD937x, Realtek RT1318 and RT1320 and Texas Instruments PCM5242. ---------------------------------------------------------------- Abdulrasaq Lawani (1): dt-bindings: sound: Convert max98088 to dtschema Aleksandr Mishin (2): ASoC: qcom: Adjust issues in case of DT error in asoc_qcom_lpass_cpu_platform_probe() ASoC: amd: Adjust error handling in case of absent codec device Amadeusz Sławiński (13): ASoC: topology: Simplify code ASoC: topology: Do not do unnecessary dobj management ASoC: topology: Properly initialize soc_enum values ASoC: topology: Cleanup soc_tplg_dapm_widget_dbytes_create ASoC: topology: Cleanup soc_tplg_dapm_widget_dmixer_create ASoC: topology: Cleanup soc_tplg_dapm_widget_denum_create ASoC: topology: Correctly set shift_r in soc_tplg_denum_create() ASoC: topology: Align dynamic object initialization for controls ASoC: topology: Rename function creating widget kcontrol ASoC: topology: Reshuffle function placement ASoC: topology: Unify code for creating standalone and widget bytes control ASoC: topology: Unify code for creating standalone and widget mixer control ASoC: topology: Unify code for creating standalone and widget enum control Andrejs Cainikovs (3): ASoC: nau8822: move nau8822_set_dai_sysclk() ASoC: nau8822: set NAU8822_REFIMP_80K only once ASoC: nau8822: add MCLK support Andy Shevchenko (6): ASoC: codecs: Remove unused of_gpio.h ASoC: fsl: Remove unused of_gpio.h ASoC: rockchip: Remove unused of_gpio.h ASoC: codecs: Replace of_gpio.h by proper one ASoC: generic: Replace of_gpio.h by proper one ASoC: samsung: Replace of_gpio.h by proper one Animesh Agarwal (11): ASoC: dt-bindings: ak4554: Convert to dtschema ASoC: dt-bindings: linux,spdif: Convert spdif-reciever.txt to dtschema ASoC: dt-bindings: wlf,wm8782: Convert to dtschema ASoC: dt-bindings: wlf,wm8804: Convert to dtschema ASoC: dt-bindings: realtek,rt5631: Convert to dtschema ASoC: dt-bindings: realtek,rt5514: Convert to dtschema ASoC: dt-bindings: realtek,rt5659: Convert to dtschema ASoC: dt-bindings: realtek,rt5677: Convert to dtschema ASoC: dt-bindings: realtek,rt5645: Convert to dtschema ASoC: dt-bindings: cirrus,cs4270: Convert to dtschema ASoC: dt-bindings: cirrus,cs42xx8: Convert to dtschema Artur Weber (6): ASoC: dt-bindings: samsung,midas-audio: Add headset mic bias supply ASoC: dt-bindings: samsung,midas-audio: Add GPIO-based headset jack detection ASoC: samsung: midas_wm1811: Use SND_SOC_DAPM_REGULATOR_SUPPLY for bias regulators ASoC: samsung: midas_wm1811: Add headset mic bias supply support ASoC: samsung: midas_wm1811: Add GPIO-based headset jack detection ASoC: samsung: midas_wm1811: Use dev_err_probe where appropriate Bard Liao (8): ASoC: Intel: sof_sdw_cs42l42: use dai parameter ASoC: Intel: sof_sdw_rt711: use dai parameter ASoC: Intel: sof_sdw_rt5682: use dai parameter ASoC: Intel: sof_sdw_rt700: use dai parameter ASoC: Intel: sof_sdw_rt_dmic: use from dai parameter ASoC: Intel: sof_sdw_rt_sdca_jack_common: use dai parameter ASoC: Intel: sof_sdw: remove get_codec_dai_by_name ASoC: Intel: sof_sdw: select PINCTRL_CS42L43 and SPI_CS42L43 Brent Lu (8): ASoC: SOF: sof-audio: rename dai clock setting query function ASoC: SOF: sof-audio: add sof_dai_get_tdm_slots function ASoC: SOF: ipc3-topology: support tdm slot number query ASoC: SOF: ipc4-topology: support tdm slot number query ASoC: Intel: maxim-common: rewrite max_98373_hw_params function ASoC: Intel: sof_da7219: remove local max98373 ops ASoC: Intel: sof_da7219: disable max98373 speaker pins in late_probe ASoC: Intel: maxim-common: add max_98373_get_tx_mask function Chancel Liu (3): ASoC: dt-bindings: fsl_rpmsg: Add compatible string for i.MX95 ASoC: fsl_rpmsg: Add support for i.MX95 platform ASoC: fsl_xcvr: Improve suspend/resume flow in fsl_xcvr_trigger() Charles Keepax (3): ASoC: Intel: sof_sdw: Add missing controls for cs42l43/cs35l56 ASoC: Intel: soc-acpi: Add match entries for some cs42l43 laptops ASoC: Intel: sof_sdw: Add quirks for some new Dell laptops Chen Ni (2): ASoC: max98088: Check for clk_prepare_enable() error ASoC: Intel: sof_sdw: Convert comma to semicolon Christian Hewitt (2): ASoC: Add support for ti,pcm5242 to the pcm512x driver ASoC: dt-bindings: add ti,pcm5242 to pcm512x Christophe JAILLET (8): ASoC: topology: Constify an argument of snd_soc_tplg_component_load() ASoC: Intel: avs: Constify struct snd_soc_tplg_ops ASoC: qdsp6: audioreach: Constify struct snd_soc_tplg_ops ASoC: Intel: Skylake: Constify struct snd_soc_tplg_ops ASoC: SOF: topology: Constify struct snd_soc_tplg_ops const_structs.checkpatch: add snd_soc_tplg_ops ASoC: intel: Constify struct snd_soc_ops ASoC: SOF: mediatek: Constify struct mtk_adsp_ipc_ops Dan Carpenter (1): ASoC: samsung: midas_wm1811: Fix error code in probe() Dr. David Alan Gilbert (3): ASoC: codecs: lpass-rx-macro: remove unused struct 'rx_macro_reg_mask_val' ASoC: codecs: wm0010: remove unused struct 'wm0010_spi_msg' ASoC: codecs: cx2072x: remove unused struct 'cx2072x_eq_ctrl' Elinor Montmasson (5): ASoC: fsl-asoc-card: add support for dai links with multiple codecs ASoC: fsl-asoc-card: add second dai link component for codecs ASoC: fsl-asoc-card: add compatibility to use 2 codecs in dai-links ASoC: fsl-asoc-card: merge spdif support from imx-spdif.c ASoC: dt-bindings: update fsl-asoc-card bindings after imx-spdif merge Fabio Estevam (3): ASoC: fsl: fsl_aud2htx: Switch to RUNTIME_PM_OPS() ASoC: fsl: fsl_easrc: Switch to RUNTIME_PM_OPS() ASoC: fsl: fsl_xcvr: Switch to RUNTIME_PM_OPS() Hao Ge (1): ASoc: PCM6240: Return directly after a failed devm_kzalloc() in pcmdevice_i2c_probe() Herve Codina (10): ASoC: fsl: fsl_qmc_audio: Check devm_kasprintf() returned value ASoC: fsl: fsl_qmc_audio: Fix issues detected by checkpatch ASoC: fsl: fsl_qmc_audio: Split channel buffer and PCM pointer handling ASoC: fsl: fsl_qmc_audio: Identify the QMC channel involved in completion routines ASoC: fsl: fsl_qmc_audio: Introduce qmc_audio_pcm_{read,write}_submit() ASoC: fsl: fsl_qmc_audio: Introduce qmc_dai_constraints_interleaved() soc: fsl: cpm1: qmc: Introduce functions to get a channel from a phandle list soc: fsl: cpm1: qmc: Introduce qmc_chan_count_phandles() dt-bindings: sound: fsl,qmc-audio: Add support for multiple QMC channels per DAI ASoC: fsl: fsl_qmc_audio: Add support for non-interleaved mode. Jack Yu (1): ASoC: rt1318: Add RT1318 audio amplifier driver Javier Carrasco (9): ASoC: cs35l34: Constify struct regmap_config ASoC: cs35l35: Constify struct regmap_config ASoC: cs35l36: Constify struct regmap_config ASoC: cs53l30: Constify struct regmap_config ASoC: jz4760: Constify struct regmap_config ASoC: jz4770: Constify struct regmap_config ASoC: wsa881x: Constify struct regmap_config ASoC: wsa883x: Constify struct regmap_config ASoC: wsa884x: Constify struct regmap_config Jeff Johnson (2): ASoC: amd: add missing MODULE_DESCRIPTION() macros ASoC: fsl: imx-pcm-fiq: add missing MODULE_DESCRIPTION() macro Jerome Brunet (2): ASoC: soc-utils: allow sample rate up to 768kHz for the dummy dai ASoC: meson: tdm: add sample rate support up to 768kHz Jiaxin Yu (1): ASoC: mediatek: mt6358: Add "Dmic Mode Switch" kcontrol for switch DMIC mode. Khanh Le (1): ASoC: Add ak4619 codec support Krzysztof Kozlowski (70): ASoC: Constify channel mapping array arguments in set_channel_map() ASoC: qcom: q6apm-lpass-dais: Implement proper channel mapping ASoC: qcom: qdsp6: Set channel mapping instead of fixed defaults ASoC: qcom: x1e80100: Correct channel mapping ASoC: codecs: wcd938x: Drop unused duplicated MIC2 bias register defines ASoC: codecs: wcd938x: Unify define used for MIC2 bias register ASoC: codecs: wcd939x: Unify define used for MIC bias registers ASoC: codecs: wcd939x: Minor white-space and define cleanup ASoC: codecs: wcd939x: Unify define used for MIC bias VOUT registers ASoC: codecs: wcd938x: Drop no-op ADC2_BCS Disable Switch ASoC: soc-dai.h: Constify DAI ops auto_selectable_formats ASoC: Constify DAI ops auto_selectable_formats ASoC: Constify of_phandle_args in snd_soc_dai_driver ASoC: Constify of_phandle_args in snd_soc_dai_link_component ASoC: Constify passed data to core function ASoC: Constify DAI passed to get_channel_map ASoC: Constify return of snd_soc_dai_get_pcm_stream() ASoC: qcom: x1e80100: Add USB DisplayPort plug support ASoC: codecs: wcd-mbhc: Constify passed MBHC reg fields ASoC: codecs: wcd9335: Drop unused state container fields ASoC: codecs: wcd9335: Constify static data ASoC: codecs: wcd9335: Handle nicer probe deferral and simplify with dev_err_probe() ASoC: codecs: wcd9335: Drop unneeded error message ASoC: codecs: wcd9335: Drop unused dmic rate handling ASoC: codecs: wcd934x: Drop unused interp path enum ASoC: codecs: wcd934x: Constify static data ASoC: codecs: wcd934x: Drop unused mic bias voltage fields ASoC: codecs: wcd934x: Handle nicer probe deferral and simplify with dev_err_probe() ASoC: codecs: wcd937x: Constify static data ASoC: codecs: wcd937x: Constify wcd937x_sdw_ch_info ASoC: codecs: wcd937x: Drop unused enums, defines and types ASoC: codecs: wcd937x: Drop unused state container fields ASoC: codecs: wcd937x: Drop unused chipid member ASoC: codecs: wcd938x: Constify static data ASoC: codecs: wcd938x: Constify wcd938x_sdw_ch_info ASoC: codecs: wcd938x: Drop unused RX/TX direction enum ASoC: codecs: wcd938x: Drop unused num_ports field ASoC: codecs: wcd939x: Constify static data ASoC: codecs: wcd939x: Constify wcd939x_sdw_ch_info ASoC: codecs: wcd939x: Drop unused RX/TX direction enum ASoC: codecs: wcd939x: Drop unused num_ports field ASoC: codecs: lpass-rx-macro: add missing handling of v2.1 codec ASoC: codecs: lpass-wsa-macro: Drop unused define ASoC: codecs: lpass-wsa-macro: Prepare to accommodate new codec versions ASoC: codecs: lpass-wsa-macro: Correct support for newer v2.5 version ASoC: codecs: lpass-macro: Gracefully handle unknown version ASoC: codecs: lpass-macro: Use enum for handling codec version ASoC: codecs: lpass-wsa-macro: add missing select of common code ASoC: codecs: lpass-rx-macro: Fix using NULL pointer in probe() dev_err ASoC: codecs: lpass-wsa-macro: Fix using NULL pointer in probe() dev_err ASoC: codecs: lpass-rx-macro: Simplify PDS cleanup with devm ASoC: codecs: lpass-rx-macro: Simplify with cleanup.h ASoC: codecs: lpass-rx-macro: Keep static regmap_config as const ASoC: dapm: Use unsigned for number of widgets in snd_soc_dapm_new_controls() ASoC: codecs: lpass-rx-macro: Use unsigned for number of widgets ASoC: codecs: lpass-wsa-macro: Simplify with cleanup.h ASoC: codecs: wcd939x: Fix typec mux and switch leak during device removal ASoC: codecs: audio-iio-aux: Simplify audio_iio_aux_add_dapms() with cleanup.h ASoC: codecs: audio-iio-aux: Simplify audio_iio_aux_probe() with cleanup.h ASoC: codecs: wcd9335: Simplify with cleanup.h ASoC: codecs: wcd934x: Simplify with cleanup.h ASoC: simple-card-utils: Simplify with cleanup.h ASoC: audio-graph-card: Use cleanup.h instead of devm_kfree() ASoC: audio-graph-card2: Use cleanup.h instead of devm_kfree() ASoC: simple-card: Use cleanup.h instead of devm_kfree() ASoC: ops: Simplify with cleanup.h ASoC: dapm: Simplify dapm_cnew_widget() with cleanup.h ASoC: dapm: Simplify snd_soc_dai_link_event_pre_pmu() with cleanup.h ASoC: codecs: aw88395: Simplify with cleanup.h ASoC: qcom: topology: Simplify with cleanup.h Kuninori Morimoto (22): ASoC: simple-card-utils: remove both playback/capture_only check ASoC: audio-graph-card2: add ep_to_port() / port_to_ports() ASoC: audio-graph-card2: remove ports node name check ASoC: audio-graph-card2: expand dai_link property part ASoC: audio-graph-card2: merge graph_parse_mclk_fs() into graph_link_init() ASoC: audio-graph-card: add ep_to_port() / port_to_ports() ASoC: audio-graph-card: remove ports node name check ASoC: audio-graph-card: enable playback/capture_only property ASoC: audio-graph-card: merge graph_parse_mclk_fs() into graph_link_init() ASoC: simple-audio-card: enable playback/capture_only property ASoC: simple-audio-card: merge simple_parse_mclk_fs() into simple_link_init() ASoC: audio-graph-card2: add support for aux devices ASoC: dt-bindings: audio-graph-card2: add support for aux devices ASoC: dt-bindings: ak4619: Add initial DT binding ASoC: dt-bindings: add missing vender prefix on filename ASoC: audio-graph-port: add link-trigger-order ASoC: simple-card-utils: add link-trigger-order support ASoC: simple-audio-card: add link-trigger-order support ASoC: audio-graph-card: add link-trigger-order support ASoC: audio-graph-card2: add link-trigger-order support ASoC: simple-audio-mux: enable to select MUX names ASoC: dt-bindings: simple-audio-mux: add state-labels property Linus Walleij (1): ASoC: tas5086: Convert to GPIO descriptors Lukas Bulwahn (1): MAINTAINERS: adjust file entries after adding vendor prefix in sound dtbs Manikantan R (1): ASoC: dt-bindings: wsa883x: Document port mapping property Mark Brown (42): Support Tegra I2S client format conversion ASoC: Intel: boards: updates for 6.11 ASoC: qcom: x1e80100: Correct channel mapping ASoC: fsl_mqs: Add i.MX95 platform support ASoC: codecs: add support for everest-semi es8311 ASoC: samsung: midas-audio: Add GPIO-based headset ASoC: Merge up fixes Dead structs in sound/soc/codecs ASoC: fsl_xcvr: Support i.MX95 platform ASoC: simple-card: sync support ASoC: codecs: wcd937x: add wcd937x audio codec ACPI/ALSA/soundwire: add acpi_get_local_u64_address() ASoC: Drop or replace of_gpio.h ASoC: codecs: lpass: add support for v2.5 rx macro ASoC: Merge up fixes Cirrus Logic Family of ADCs tlv320adc3xxx: Allow MICBIAS pins to be used as ASoC: dt-bindings: convert everest,es7134.txt & ASoC: codecs: wcd family: cleanups ASoC: add compatible for ti,pcm5242 ASoC: Add ak4619 codec support ASoC: Few constifications (mostly arguments) ASoC: qcom: display port changes ASoC: nau8822: add MCLK support ASoC: codecs: ES8326: Solving headphone detection and ASoC: Intel: boards: updates for 6.11 - part2 ASoC: simple-card / audio-graph: ASoC: imx-audmix: Split capture device to be a new Add audio support for LPC32XX CPUs ASoC: codecs: wsa88xx: add support for static port ASoC: cs35l56: Remove obsolete and redundant code ASoC: simple-audio-mux: add state-labels Add master clock handling for nau8824 ASoC: topology: kcontrol registration cleanup ASoC: cs35l56: Set correct upper volume limit ASoC: codecs: lpass-rx-macro: Few code cleanups Add support for non-interleaved mode in qmc_audio ASoC: Simplify code with cleanup.h ASoC: fsl-asoc-card: add S/PDIF controller support firmware: cs_dsp: Some small coding improvements ASoC: dt-bindings: convert qcom sound bindings to Fix the unbalanced pm_runtime_enable in wcd937x-sdw Matteo Martelli (2): ASoC: es8311: dt-bindings: add everest es8311 codec ASoC: codecs: es8311: add everest es8311 codec support Maxim Kochetkov (2): ASoC: dt-bindings: nau8824: Add master clock handling ASoC: codecs: nau8824: Add master clock handling Mithil Bavishi (1): ASoC: dt-bindings: omap-mcpdm: Convert to DT schema Mohammad Rafi Shaik (3): ASoC: codecs: wcd937x-sdw: Fix Unbalanced pm_runtime_enable ASoC: codecs: wcd937x: Remove the string compare in MIC BIAS widget settings ASoC: codecs: wcd937x: Remove separate handling for vdd-buck supply Mohan Kumar (2): ASoC: simple-card-utils: Split simple_fixup_sample_fmt func ASoC: tegra: I2S client convert formats handling Nathan Chancellor (2): ASoC: fsl: lpc3xxx-i2s: Avoid using ret uninitialized in lpc32xx_i2s_probe() ASoC: fsl: lpc3xxx-i2s: Include bitfield.h for FIELD_PREP Neil Armstrong (5): ASoC: dt-bindings: convert amlogic,g12a-tohdmitx to dt-schema ASoC: dt-bindings: convert tas571x.txt to dt-schema ASoC: dt-bindings: convert everest,es7241.txt to dt-schema ASoC: dt-bindings: convert everest,es7134.txt to dt-schema ASoC: dt-bindings: amlogic,gx-sound-card: drop minItems for audio-widgets Paul Handrigan (4): ASoC: dt-bindings: cirrus,cs530x: Add initial DT binding ASoC: cs530x: Support for cs530x ADCs ASoC: cs530x: Calculate proper bclk rate using TDM ASoC: cs530x: Remove bclk from private structure Peter Ujfalusi (4): ASoC: SOF: ipc4-topology: Add support for NHLT with 16-bit only DMIC blob ASoC: SOF: Intel: pci-tgl: Align ADL-N sof_dev_desc struct name to convention ASoC: SOF: ipc4-topology: Use correct queue_id for requesting input pin format ASoC: SOF: ipc4-topology: Use single token list for the copiers Pierre-Louis Bossart (6): ASoC: SOF: Intel: hda: print PCI class info only once ACPI: utils: introduce acpi_get_local_u64_address() soundwire: slave: simplify code with acpi_get_local_u64_address() ALSA: hda: intel-sdw-acpi: use acpi_get_local_u64_address() ASoC: Intel: sof_sdw: fix jack detection on ADL-N variant RVP ASoC: Intel: sof_sdw: add quirk for Dell SKU 0B8C Piotr Wojtaszczyk (2): ASoC: dt-bindings: lpc32xx: Add lpc32xx i2s DT binding ASoC: fsl: Add i2s and pcm drivers for LPC32xx CPUs Prasad Kumpatla (7): ASoC: dt-bindings: document wcd937x Audio Codec ASoC: codecs: wcd937x-sdw: add SoundWire driver ASoC: codecs: wcd937x: add wcd937x codec driver ASoC: codecs: wcd937x: add basic controls ASoC: codecs: wcd937x: add playback dapm widgets ASoC: codecs: wcd937x: add capture dapm widgets ASoC: codecs: wcd937x: add audio routing and Kconfig Rayyan Ansari (2): ASoC: dt-bindings: qcom,msm8916-wcd-digital-codec: convert to dtschema ASoC: dt-bindings: qcom,apq8096-sndcard: use dtschema Ricard Wanderlof (3): ASoC: dt-bindings: tlv320adc3xxx: Fix incorrect GPIO description ASoC: dt-bindings: tlv320adc3xxx: Add MICBIAS-as-GPO properties ASoC: tlv320adc3xxx: Add support for using MICBIAS pins as GPO Richard Fitzgerald (10): ASoC: cs35l56: Revert support for dual-ownership of ASP registers ASoC: cs35l56: Remove support for A1 silicon ASoC: cs35l56: Remove redundant clearing of clk_stop_mode1 firmware: cs_dsp: Don't allow writes to read-only controls ASoC: cs35l56: Use header defines for Speaker Volume control definition ASoC: cs35l56: Limit Speaker Volume to +12dB maximum firmware: cs_dsp: Don't allocate temporary buffer for info text firmware: cs_dsp: Make wmfw and bin filename arguments const char * firmware: cs_dsp: Clarify wmfw format version log message firmware: cs_dsp: Rename fw_ver to wmfw_ver Rob Herring (Arm) (2): ASoC: PCM6240: Use of_property_read_reg() ASoC: tas2781: Use of_property_read_reg() Shenghao Ding (8): ASoc: tas2781: Enable RCA-based playback without DSP firmware download ASoc: tas2781: Add name_prefix as the prefix name of firmwares and kcontrol to support corresponding TAS2563/TAS2781s ASoc: tas2781: Add name_prefix as the prefix name of DSP firmwares and calibrated data files ASoc: tas2781: Set "Speaker Force Firmware Load" as the common kcontrol for both tas27871 and tas2563 ASoc: pcm6240: Remove unnecessary name-prefix for all the controls ASoc: TAS2781: replace beXX_to_cpup with get_unaligned_beXX for potentially broken alignment ASoc: TAS2781: rename the tas2781_reset as tasdevice_reset ASoC: tas2781: Add new Kontrol to set tas2563 digital Volume Shengjiu Wang (9): ASoC: dt-bindings: fsl,mqs: Add i.MX95 platform support ASoC: fsl_mqs: Add i.MX95 platform support ASoC: dt-bindings: fsl,xcvr: Add compatible string for i.MX95 ASoC: fsl_xcvr: Add support for i.MX95 platform ASoC: fsl_sai: Add separate DAI for transmitter and receiver ASoC: fsl_audmix: Split playback and capture stream to different DAI ASoC: imx-audmix: Split capture device for audmix ASoC: dt-bindings: fsl,xcvr: Adjust the number of interrupts ASoC: ak4458: remove "reset-gpios" property handler Shuming Fan (4): ASoC: rt1320: Add RT1320 SDCA vendor-specific driver ASoC: rt711-sdca: add GE selected mode control ASoC: rt712-sdca: change the definition name of SDCA channel number ASoC: rt712-sdca: add the function for version B Simon Trimmer (2): ASoC: cs35l56: Attempt to read from cirrus,speaker-id device property first ASoC: cs35l56: Accept values greater than 0 as IRQ numbers Srinivas Kandagatla (9): ASoC: codecs: lpass-macro: add helpers to get codec version ASoC: codec: lpass-rx-macro: prepare driver to accomdate new codec versions ASoC: codec: lpass-rx-macro: add support for 2.5 codec version ASoC: qcom: q6dsp: parse Display port tokens ASoC: qcom: common: add Display port Jack function ASoC: qcom: sc8280xp: add Display port Jack ASoC: codecs: wsa883x: parse port-mapping information ASoC: dt-bindings: wsa8840: Document port mapping property ASoC: codecs: wsa884x: parse port-mapping information Tony Luck (1): ASoC: Intel: avs: es8336: Switch to new Intel CPU model defines Uwe Kleine-König (1): ASoC: codecs: Drop explicit initialization of struct i2c_device_id::driver_data to 0 Vijendar Mukunda (5): ASoC: amd: acp: remove acp_i2s_probe function ASoC: amd: acp: remove unused variables from acp_resource structure ASoC: amd: acp: modify conditional check for programming i2s mclk ASoC: amd: acp: move i2s clock generation sequence ASoC: amd: acp: add pcm constraints for buffer size and period size Xiaxi Shen (1): ASoC: dt-bindings: ak4104: convert to dt schema Yang Li (1): ASoC: Remove unneeded semicolon Zhang Yi (3): ASoC: codecs: ES8326: Slove headphone detection issue ASoC: codecs: ES8326: Minimize the pop noise ASoC: codecs: ES8326: regcache_sync error issue Documentation/admin-guide/LSM/tomoyo.rst | 35 +- Documentation/admin-guide/mm/transhuge.rst | 4 +- Documentation/cdrom/cdrom-standard.rst | 4 +- .../devicetree/bindings/arm/stm32/st,mlahb.yaml | 3 +- Documentation/devicetree/bindings/arm/sunxi.yaml | 6 +- .../devicetree/bindings/input/elan,ekth6915.yaml | 19 +- .../devicetree/bindings/input/ilitek,ili2901.yaml | 66 + Documentation/devicetree/bindings/sound/ak4104.txt | 25 - Documentation/devicetree/bindings/sound/ak4554.txt | 11 - .../bindings/sound/amlogic,g12a-tohdmitx.txt | 58 - .../bindings/sound/amlogic,g12a-tohdmitx.yaml | 54 + .../bindings/sound/amlogic,gx-sound-card.yaml | 1 - .../bindings/sound/asahi-kasei,ak4104.yaml | 49 + .../sound/{ak4375.yaml => asahi-kasei,ak4375.yaml} | 2 +- .../bindings/sound/asahi-kasei,ak4554.yaml | 27 + .../sound/{ak4613.yaml => asahi-kasei,ak4613.yaml} | 2 +- .../bindings/sound/asahi-kasei,ak4619.yaml | 62 + .../sound/{ak4642.yaml => asahi-kasei,ak4642.yaml} | 2 +- .../bindings/sound/audio-graph-card2.yaml | 5 + .../bindings/sound/audio-graph-port.yaml | 9 + .../devicetree/bindings/sound/cirrus,cs4270.yaml | 59 + .../devicetree/bindings/sound/cirrus,cs42xx8.yaml | 81 + .../devicetree/bindings/sound/cirrus,cs530x.yaml | 85 + Documentation/devicetree/bindings/sound/cs4270.txt | 21 - .../devicetree/bindings/sound/cs42xx8.txt | 34 - .../devicetree/bindings/sound/everest,es7134.txt | 15 - .../devicetree/bindings/sound/everest,es71x4.yaml | 62 + .../devicetree/bindings/sound/everest,es7241.txt | 28 - .../devicetree/bindings/sound/everest,es7241.yaml | 67 + .../devicetree/bindings/sound/everest,es8316.yaml | 7 +- .../bindings/sound/fsl,imx-audio-spdif.yaml | 66 - .../devicetree/bindings/sound/fsl,mqs.yaml | 2 + .../devicetree/bindings/sound/fsl,qmc-audio.yaml | 41 +- .../devicetree/bindings/sound/fsl,rpmsg.yaml | 1 + .../sound/{sgtl5000.yaml => fsl,sgtl5000.yaml} | 2 +- .../devicetree/bindings/sound/fsl,xcvr.yaml | 43 +- .../devicetree/bindings/sound/fsl-asoc-card.yaml | 53 +- .../{linux,spdif-dit.yaml => linux,spdif.yaml} | 8 +- .../devicetree/bindings/sound/maxim,max98088.txt | 23 - .../devicetree/bindings/sound/maxim,max98088.yaml | 47 + .../sound/{zl38060.yaml => mscc,zl38060.yaml} | 2 +- .../devicetree/bindings/sound/nuvoton,nau8824.yaml | 8 + .../devicetree/bindings/sound/nxp,lpc3220-i2s.yaml | 73 + .../devicetree/bindings/sound/omap-mcpdm.txt | 30 - .../devicetree/bindings/sound/pcm512x.txt | 2 +- .../devicetree/bindings/sound/qcom,apq8096.txt | 128 - .../sound/qcom,msm8916-wcd-digital-codec.yaml | 55 + .../bindings/sound/qcom,msm8916-wcd-digital.txt | 20 - .../devicetree/bindings/sound/qcom,sm8250.yaml | 1 + .../bindings/sound/qcom,wcd937x-sdw.yaml | 91 + .../devicetree/bindings/sound/qcom,wcd937x.yaml | 82 + .../devicetree/bindings/sound/qcom,wsa883x.yaml | 8 + .../devicetree/bindings/sound/qcom,wsa8840.yaml | 8 + .../sound/{rt1019.yaml => realtek,rt1019.yaml} | 2 +- .../devicetree/bindings/sound/realtek,rt5514.yaml | 70 + .../devicetree/bindings/sound/realtek,rt5631.yaml | 67 + .../devicetree/bindings/sound/realtek,rt5645.yaml | 131 + .../devicetree/bindings/sound/realtek,rt5659.yaml | 129 + .../devicetree/bindings/sound/realtek,rt5677.yaml | 135 + Documentation/devicetree/bindings/sound/rt5514.txt | 37 - Documentation/devicetree/bindings/sound/rt5631.txt | 48 - Documentation/devicetree/bindings/sound/rt5645.txt | 82 - Documentation/devicetree/bindings/sound/rt5659.txt | 89 - Documentation/devicetree/bindings/sound/rt5677.txt | 78 - .../bindings/sound/samsung,midas-audio.yaml | 33 + .../bindings/sound/simple-audio-mux.yaml | 6 + .../devicetree/bindings/sound/spdif-receiver.txt | 10 - .../devicetree/bindings/sound/tas571x.txt | 49 - .../devicetree/bindings/sound/ti,omap4-mcpdm.yaml | 73 + .../sound/{tas2562.yaml => ti,tas2562.yaml} | 2 +- .../sound/{tas2770.yaml => ti,tas2770.yaml} | 2 +- .../sound/{tas27xx.yaml => ti,tas27xx.yaml} | 2 +- .../devicetree/bindings/sound/ti,tas57xx.yaml | 133 + .../sound/{tas5805m.yaml => ti,tas5805m.yaml} | 2 +- .../bindings/sound/ti,tlv320adc3xxx.yaml | 32 +- .../{tlv320adcx140.yaml => ti,tlv320adcx140.yaml} | 2 +- .../sound/{wm8750.yaml => wlf,wm8750.yaml} | 2 +- .../devicetree/bindings/sound/wlf,wm8782.yaml | 47 + .../devicetree/bindings/sound/wlf,wm8804.yaml | 58 + Documentation/devicetree/bindings/sound/wm8782.txt | 24 - Documentation/devicetree/bindings/sound/wm8804.txt | 25 - Documentation/kbuild/kconfig-language.rst | 12 +- Documentation/networking/af_xdp.rst | 33 +- .../userspace-api/media/v4l/dev-subdev.rst | 2 +- MAINTAINERS | 24 +- Makefile | 2 +- arch/arm/configs/imx_v6_v7_defconfig | 1 - arch/arm64/configs/defconfig | 1 - arch/arm64/include/asm/el2_setup.h | 6 +- arch/arm64/include/asm/io.h | 36 +- arch/arm64/include/asm/kvm_arm.h | 6 + arch/arm64/include/asm/kvm_emulate.h | 71 +- arch/arm64/include/asm/kvm_host.h | 25 +- arch/arm64/include/asm/kvm_hyp.h | 4 +- arch/arm64/include/asm/kvm_pkvm.h | 9 + arch/arm64/kernel/armv8_deprecated.c | 3 + arch/arm64/kvm/arm.c | 76 + arch/arm64/kvm/emulate-nested.c | 21 +- arch/arm64/kvm/fpsimd.c | 11 +- arch/arm64/kvm/guest.c | 3 +- arch/arm64/kvm/hyp/aarch32.c | 18 +- arch/arm64/kvm/hyp/fpsimd.S | 6 + arch/arm64/kvm/hyp/include/hyp/switch.h | 36 +- arch/arm64/kvm/hyp/include/nvhe/pkvm.h | 1 - arch/arm64/kvm/hyp/nvhe/hyp-main.c | 84 +- arch/arm64/kvm/hyp/nvhe/pkvm.c | 17 +- arch/arm64/kvm/hyp/nvhe/setup.c | 25 +- arch/arm64/kvm/hyp/nvhe/switch.c | 24 +- arch/arm64/kvm/hyp/vhe/switch.c | 12 +- arch/arm64/kvm/nested.c | 6 +- arch/arm64/kvm/reset.c | 3 + arch/arm64/mm/contpte.c | 4 +- arch/loongarch/boot/dts/loongson-2k0500-ref.dts | 4 +- arch/loongarch/boot/dts/loongson-2k1000-ref.dts | 4 +- arch/loongarch/boot/dts/loongson-2k2000-ref.dts | 2 +- arch/loongarch/include/asm/numa.h | 1 + arch/loongarch/include/asm/stackframe.h | 2 +- arch/loongarch/kernel/head.S | 2 +- arch/loongarch/kernel/setup.c | 6 +- arch/loongarch/kernel/smp.c | 5 +- arch/loongarch/kernel/vmlinux.lds.S | 10 +- arch/riscv/kvm/aia_device.c | 7 +- arch/riscv/kvm/vcpu_onereg.c | 4 +- arch/riscv/mm/fault.c | 4 +- arch/riscv/mm/init.c | 21 +- arch/s390/kernel/crash_dump.c | 54 +- arch/x86/include/asm/kvm_host.h | 1 + arch/x86/include/asm/vmxfeatures.h | 2 +- arch/x86/kernel/amd_nb.c | 9 +- arch/x86/kernel/machine_kexec_64.c | 11 +- arch/x86/kvm/Kconfig | 11 +- arch/x86/kvm/lapic.c | 39 +- arch/x86/kvm/lapic.h | 2 +- arch/x86/kvm/mmu/mmu.c | 46 +- arch/x86/kvm/mmu/spte.h | 9 + arch/x86/kvm/mmu/tdp_iter.h | 2 + arch/x86/kvm/mmu/tdp_mmu.c | 2 +- arch/x86/kvm/svm/sev.c | 19 +- arch/x86/kvm/svm/svm.c | 69 +- arch/x86/kvm/svm/svm.h | 4 +- arch/x86/kvm/vmx/nested.c | 5 + arch/x86/kvm/vmx/vmx.c | 11 +- arch/x86/kvm/x86.c | 11 +- drivers/acpi/ac.c | 4 +- drivers/acpi/apei/einj-core.c | 2 +- drivers/acpi/ec.c | 9 +- drivers/acpi/sbs.c | 4 +- drivers/acpi/utils.c | 16 +- drivers/ata/pata_macio.c | 9 +- drivers/block/null_blk/main.c | 4 +- drivers/char/tpm/tpm.h | 2 +- drivers/char/tpm/tpm_tis_core.c | 3 +- drivers/char/tpm/tpm_tis_core.h | 2 +- drivers/clk/sifive/sifive-prci.c | 8 - drivers/cpufreq/amd-pstate-ut.c | 3 +- drivers/cpufreq/amd-pstate.c | 36 +- {include/linux => drivers/cpufreq}/amd-pstate.h | 33 - drivers/cpufreq/intel_pstate.c | 3 +- drivers/cxl/core/region.c | 18 +- drivers/edac/amd64_edac.c | 8 +- drivers/edac/igen6_edac.c | 4 +- drivers/firmware/cirrus/cs_dsp.c | 71 +- drivers/firmware/efi/efi-pstore.c | 8 +- drivers/firmware/efi/libstub/loongarch.c | 2 +- drivers/firmware/efi/libstub/zboot.lds | 1 + drivers/firmware/efi/runtime-wrappers.c | 13 +- drivers/gpio/Kconfig | 2 +- drivers/gpio/gpio-gw-pld.c | 1 + drivers/gpio/gpio-mc33880.c | 1 + drivers/gpio/gpio-pcf857x.c | 1 + drivers/gpio/gpio-pl061.c | 1 + drivers/gpio/gpio-tqmx86.c | 110 +- drivers/gpu/drm/amd/include/pptable.h | 91 +- .../gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_4_ppt.c | 20 +- .../gpu/drm/arm/display/komeda/komeda_color_mgmt.c | 5 - drivers/gpu/drm/panel/panel-sitronix-st7789v.c | 4 +- drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 19 +- drivers/gpu/drm/vmwgfx/vmwgfx_drv.h | 3 - drivers/gpu/drm/vmwgfx/vmwgfx_gmrid_manager.c | 4 +- drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 28 +- drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c | 60 +- drivers/gpu/drm/xe/xe_gt_sriov_pf_config.c | 1 + drivers/hid/hid-asus.c | 4 +- drivers/hid/hid-core.c | 1 - drivers/hid/hid-debug.c | 2 + drivers/hid/hid-ids.h | 2 + drivers/hid/hid-input.c | 13 + drivers/hid/hid-logitech-dj.c | 4 +- drivers/hid/hid-logitech-hidpp.c | 1 + drivers/hid/hid-nintendo.c | 6 +- drivers/hid/hid-nvidia-shield.c | 4 +- drivers/hid/i2c-hid/i2c-hid-of-elan.c | 59 +- drivers/hid/intel-ish-hid/ishtp/loader.c | 79 +- drivers/hid/intel-ish-hid/ishtp/loader.h | 33 +- drivers/i2c/busses/i2c-synquacer.c | 11 +- drivers/input/touchscreen/silead.c | 19 +- drivers/iommu/amd/amd_iommu.h | 3 +- drivers/iommu/amd/init.c | 9 + drivers/iommu/amd/iommu.c | 48 +- drivers/iommu/amd/ppr.c | 25 +- drivers/iommu/dma-iommu.c | 8 +- drivers/irqchip/irq-gic-v3-its.c | 44 +- drivers/irqchip/irq-riscv-intc.c | 9 +- drivers/irqchip/irq-sifive-plic.c | 34 +- drivers/media/pci/intel/ipu6/ipu6-isys-queue.c | 6 +- drivers/media/pci/intel/ipu6/ipu6-isys.c | 71 +- drivers/media/pci/intel/ipu6/ipu6.c | 5 +- drivers/media/pci/intel/ivsc/mei_csi.c | 5 +- drivers/media/pci/mgb4/mgb4_core.c | 7 +- drivers/net/ethernet/intel/ice/ice.h | 44 +- drivers/net/ethernet/intel/ice/ice_base.c | 3 + drivers/net/ethernet/intel/ice/ice_lib.c | 27 +- drivers/net/ethernet/intel/ice/ice_main.c | 118 +- drivers/net/ethernet/intel/ice/ice_nvm.c | 116 +- drivers/net/ethernet/intel/ice/ice_type.h | 14 +- drivers/net/ethernet/intel/ice/ice_xsk.c | 13 +- drivers/net/ethernet/intel/igc/igc_ethtool.c | 9 +- drivers/net/ethernet/intel/igc/igc_main.c | 4 + .../net/ethernet/marvell/octeontx2/af/rvu_npc.c | 33 +- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 104 +- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 9 +- drivers/net/ethernet/mellanox/mlx5/core/fw.c | 4 + drivers/net/ethernet/mellanox/mlx5/core/health.c | 8 + .../net/ethernet/mellanox/mlx5/core/lag/port_sel.c | 8 +- .../net/ethernet/mellanox/mlx5/core/lib/pci_vsc.c | 4 + drivers/net/ethernet/mellanox/mlx5/core/main.c | 3 + drivers/net/ethernet/pensando/ionic/ionic_txrx.c | 1 + drivers/net/phy/micrel.c | 104 +- drivers/net/virtio_net.c | 42 +- drivers/net/vmxnet3/vmxnet3_drv.c | 2 +- drivers/net/vxlan/vxlan_core.c | 8 +- drivers/net/wireless/ath/ath10k/Kconfig | 1 + drivers/net/wireless/ath/ath11k/core.c | 2 +- drivers/net/wireless/ath/ath11k/mac.c | 38 +- drivers/net/wireless/ath/ath11k/pcic.c | 25 +- drivers/net/wireless/intel/iwlwifi/iwl-drv.c | 2 +- drivers/net/wireless/intel/iwlwifi/mvm/d3.c | 16 +- drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c | 9 + drivers/net/wireless/intel/iwlwifi/mvm/fw.c | 14 +- drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c | 2 +- drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 39 +- .../net/wireless/intel/iwlwifi/mvm/mld-mac80211.c | 2 - drivers/net/wireless/intel/iwlwifi/mvm/mld-sta.c | 13 +- drivers/net/wireless/intel/iwlwifi/mvm/mvm.h | 1 + drivers/net/wireless/intel/iwlwifi/mvm/rs.h | 9 +- drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c | 5 +- drivers/net/wireless/intel/iwlwifi/mvm/scan.c | 12 +- drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 12 +- drivers/net/wireless/intel/iwlwifi/mvm/sta.h | 5 + drivers/net/wireless/mediatek/mt76/mt7615/main.c | 4 + drivers/net/wireless/microchip/wilc1000/cfg80211.c | 41 +- drivers/net/wireless/microchip/wilc1000/hif.c | 17 +- drivers/net/wireless/microchip/wilc1000/netdev.c | 43 +- drivers/net/wireless/microchip/wilc1000/netdev.h | 12 +- drivers/net/wireless/microchip/wilc1000/wlan.c | 5 +- drivers/net/wireless/realtek/rtlwifi/core.c | 15 - drivers/net/wwan/iosm/iosm_ipc_devlink.c | 2 +- drivers/nvme/host/fabrics.c | 6 +- drivers/nvme/host/pr.c | 2 +- drivers/of/irq.c | 125 +- drivers/of/of_private.h | 3 + drivers/of/of_test.c | 1 + drivers/of/property.c | 30 +- drivers/pci/access.c | 4 - drivers/pci/pci.c | 1 - drivers/pci/probe.c | 3 - drivers/platform/x86/Kconfig | 1 + drivers/platform/x86/amd/hsmp.c | 50 +- drivers/platform/x86/dell/dell-smbios-base.c | 103 +- drivers/platform/x86/touchscreen_dmi.c | 59 +- drivers/pnp/base.h | 1 + drivers/pnp/driver.c | 6 + drivers/ptp/ptp_chardev.c | 3 +- drivers/scsi/device_handler/scsi_dh_alua.c | 31 +- drivers/scsi/mpi3mr/mpi3mr_transport.c | 2 +- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 4 +- drivers/scsi/qedf/qedf.h | 1 + drivers/scsi/qedf/qedf_main.c | 47 +- drivers/scsi/scsi.c | 7 + drivers/scsi/sr.h | 2 +- drivers/scsi/sr_ioctl.c | 5 +- drivers/soc/fsl/qe/qmc.c | 32 +- drivers/soundwire/slave.c | 13 +- drivers/thermal/thermal_core.c | 35 +- drivers/thermal/thermal_core.h | 2 + drivers/thermal/thermal_debugfs.c | 18 +- drivers/thermal/thermal_trip.c | 20 +- drivers/ufs/core/ufs-mcq.c | 17 +- fs/bcachefs/btree_locking.c | 1 + fs/bcachefs/move.c | 16 +- fs/btrfs/btrfs_inode.h | 10 + fs/btrfs/disk-io.c | 10 +- fs/btrfs/extent_io.c | 60 +- fs/btrfs/file.c | 16 + fs/btrfs/ordered-data.c | 31 + fs/btrfs/tree-log.c | 17 +- fs/nilfs2/dir.c | 2 +- fs/nilfs2/segment.c | 3 + fs/proc/base.c | 2 +- fs/smb/client/smb2pdu.c | 3 - fs/smb/client/smb2transport.c | 2 +- include/dt-bindings/sound/audio-graph.h | 26 + include/linux/acpi.h | 1 + include/linux/atomic/atomic-arch-fallback.h | 6 +- include/linux/atomic/atomic-instrumented.h | 8 +- include/linux/atomic/atomic-long.h | 4 +- include/linux/cdrom.h | 2 +- include/linux/firmware/cirrus/cs_dsp.h | 10 +- include/linux/firmware/mediatek/mtk-adsp-ipc.h | 2 +- include/linux/huge_mm.h | 10 +- include/linux/i2c.h | 1 - include/linux/iommu.h | 2 +- include/linux/ksm.h | 17 +- include/linux/lockdep.h | 5 - include/linux/mm_types.h | 2 +- include/linux/pci.h | 2 - include/linux/pnp.h | 6 +- include/net/rtnetlink.h | 1 + include/net/tcp_ao.h | 7 +- include/soc/fsl/qe/qmc.h | 27 +- include/sound/cs35l41.h | 4 +- include/sound/cs35l56.h | 13 +- include/sound/rt1318.h | 16 + include/sound/simple_card_utils.h | 8 +- include/sound/soc-dai.h | 36 +- include/sound/soc-dapm.h | 2 +- include/sound/soc-topology.h | 2 +- include/sound/soc.h | 19 +- include/sound/sof.h | 1 + include/sound/tas2781-dsp.h | 11 +- include/sound/tas2781-tlv.h | 262 +- include/sound/tas2781.h | 10 +- include/uapi/linux/input-event-codes.h | 2 + io_uring/io-wq.c | 10 +- io_uring/io_uring.h | 2 +- io_uring/napi.c | 24 +- io_uring/register.c | 4 + kernel/bpf/devmap.c | 3 - kernel/bpf/syscall.c | 11 +- kernel/bpf/verifier.c | 4 + kernel/events/core.c | 13 + kernel/trace/bpf_trace.c | 2 - lib/test_rhashtable.c | 1 + mm/filemap.c | 2 +- mm/huge_memory.c | 8 +- mm/hugetlb.c | 16 +- mm/kmsan/core.c | 15 +- mm/ksm.c | 17 +- mm/memcontrol.c | 2 - mm/mempool.c | 2 +- mm/page_alloc.c | 50 +- mm/page_io.c | 2 +- mm/slub.c | 5 +- mm/util.c | 10 +- mm/vmalloc.c | 2 +- mm/vmscan.c | 2 +- net/ax25/af_ax25.c | 6 + net/ax25/ax25_dev.c | 2 +- net/bpf/test_run.c | 6 + net/core/dev.c | 3 +- net/core/dst_cache.c | 2 + net/core/rtnetlink.c | 44 +- net/ethtool/ioctl.c | 2 +- net/ethtool/tsinfo.c | 6 +- net/ipv4/devinet.c | 2 +- net/ipv4/fib_frontend.c | 7 +- net/ipv4/tcp.c | 9 +- net/ipv4/tcp_ao.c | 13 +- net/ipv6/ila/ila_lwt.c | 7 +- net/ipv6/ioam6_iptunnel.c | 8 +- net/ipv6/ip6_fib.c | 6 +- net/ipv6/route.c | 1 + net/ipv6/rpl_iptunnel.c | 14 +- net/ipv6/seg6_iptunnel.c | 14 +- net/mac80211/cfg.c | 9 +- net/mac80211/he.c | 10 +- net/mac80211/ieee80211_i.h | 2 + net/mac80211/main.c | 10 +- net/mac80211/mesh.c | 1 + net/mac80211/mesh_pathtbl.c | 13 + net/mac80211/parse.c | 2 +- net/mac80211/scan.c | 14 +- net/mac80211/sta_info.c | 4 +- net/mac80211/util.c | 2 + net/mptcp/protocol.c | 9 +- net/ncsi/internal.h | 2 + net/ncsi/ncsi-manage.c | 73 +- net/ncsi/ncsi-rsp.c | 4 +- net/sched/sch_multiq.c | 2 +- net/sched/sch_taprio.c | 15 +- net/smc/af_smc.c | 22 +- net/sunrpc/auth_gss/svcauth_gss.c | 2 +- net/unix/af_unix.c | 90 +- net/unix/diag.c | 12 +- net/wireless/core.c | 2 +- net/wireless/pmsr.c | 8 +- net/wireless/rdev-ops.h | 6 +- net/wireless/scan.c | 50 +- net/wireless/sysfs.c | 4 +- net/wireless/util.c | 7 +- net/xdp/xsk.c | 5 +- scripts/atomic/kerneldoc/sub_and_test | 2 +- scripts/const_structs.checkpatch | 1 + scripts/kconfig/confdata.c | 13 - scripts/kconfig/expr.c | 29 - scripts/kconfig/expr.h | 1 - scripts/kconfig/gconf.c | 3 +- scripts/kconfig/menu.c | 2 - scripts/link-vmlinux.sh | 2 +- scripts/mod/modpost.c | 5 +- security/tomoyo/Kconfig | 2 +- security/tomoyo/common.c | 2 +- sound/hda/intel-sdw-acpi.c | 6 +- sound/pci/hda/tas2781_hda_i2c.c | 4 +- sound/soc/amd/acp-es8336.c | 4 +- sound/soc/amd/acp/acp-i2s.c | 19 +- sound/soc/amd/acp/acp-legacy-common.c | 1 + sound/soc/amd/acp/acp-pci.c | 1 + sound/soc/amd/acp/acp-pdm.c | 1 + sound/soc/amd/acp/acp-platform.c | 14 + sound/soc/amd/acp/acp-rembrandt.c | 7 +- sound/soc/amd/acp/acp-renoir.c | 2 - sound/soc/amd/acp/acp63.c | 7 +- sound/soc/amd/acp/acp70.c | 2 - sound/soc/amd/acp/amd.h | 3 +- sound/soc/amd/ps/ps-mach.c | 1 + sound/soc/amd/renoir/acp3x-rn.c | 1 + sound/soc/amd/yc/acp6x-mach.c | 1 + sound/soc/codecs/Kconfig | 56 + sound/soc/codecs/Makefile | 19 + sound/soc/codecs/adau7118.c | 6 +- sound/soc/codecs/ak4118.c | 1 - sound/soc/codecs/ak4458.c | 12 +- sound/soc/codecs/ak4613.c | 2 +- sound/soc/codecs/ak4619.c | 912 ++++++ sound/soc/codecs/audio-iio-aux.c | 83 +- sound/soc/codecs/aw87390.c | 2 +- sound/soc/codecs/aw88261.c | 2 +- sound/soc/codecs/aw88395/aw88395.c | 4 +- sound/soc/codecs/aw88395/aw88395_lib.c | 51 +- sound/soc/codecs/aw88399.c | 4 +- sound/soc/codecs/cs35l34.c | 2 +- sound/soc/codecs/cs35l35.c | 2 +- sound/soc/codecs/cs35l36.c | 2 +- sound/soc/codecs/cs35l41-lib.c | 4 +- sound/soc/codecs/cs35l41.c | 3 +- sound/soc/codecs/cs35l56-sdw.c | 75 - sound/soc/codecs/cs35l56-shared.c | 133 +- sound/soc/codecs/cs35l56.c | 211 +- sound/soc/codecs/cs35l56.h | 2 - sound/soc/codecs/cs530x-i2c.c | 72 + sound/soc/codecs/cs530x.c | 971 +++++++ sound/soc/codecs/cs530x.h | 223 ++ sound/soc/codecs/cs53l30.c | 3 +- sound/soc/codecs/cx2072x.c | 5 - sound/soc/codecs/da7213.c | 2 +- sound/soc/codecs/es8311.c | 973 +++++++ sound/soc/codecs/es8311.h | 162 ++ sound/soc/codecs/es8326.c | 58 +- sound/soc/codecs/framer-codec.c | 2 +- sound/soc/codecs/hdmi-codec.c | 2 +- sound/soc/codecs/idt821034.c | 2 +- sound/soc/codecs/jz4760.c | 2 +- sound/soc/codecs/jz4770.c | 2 +- sound/soc/codecs/lpass-macro-common.c | 23 + sound/soc/codecs/lpass-macro-common.h | 41 + sound/soc/codecs/lpass-rx-macro.c | 623 ++-- sound/soc/codecs/lpass-tx-macro.c | 2 +- sound/soc/codecs/lpass-va-macro.c | 31 +- sound/soc/codecs/lpass-wsa-macro.c | 644 ++++- sound/soc/codecs/max98088.c | 10 +- sound/soc/codecs/max98390.c | 1 - sound/soc/codecs/max98504.c | 6 +- sound/soc/codecs/mt6358.c | 38 +- sound/soc/codecs/nau8822.c | 76 +- sound/soc/codecs/nau8822.h | 1 + sound/soc/codecs/nau8824.c | 21 +- sound/soc/codecs/nau8824.h | 1 + sound/soc/codecs/pcm3168a.c | 3 +- sound/soc/codecs/pcm512x-i2c.c | 2 + sound/soc/codecs/pcm512x-spi.c | 2 + sound/soc/codecs/pcm6240.c | 67 +- sound/soc/codecs/peb2466.c | 2 +- sound/soc/codecs/rk817_codec.c | 1 - sound/soc/codecs/rt1318.c | 1354 +++++++++ sound/soc/codecs/rt1318.h | 342 +++ sound/soc/codecs/rt1320-sdw.c | 2260 +++++++++++++++ sound/soc/codecs/rt1320-sdw.h | 94 + sound/soc/codecs/rt711-sdca.c | 72 + sound/soc/codecs/rt711-sdca.h | 1 + sound/soc/codecs/rt712-sdca-sdw.c | 36 +- sound/soc/codecs/rt712-sdca-sdw.h | 95 +- sound/soc/codecs/rt712-sdca.c | 665 ++++- sound/soc/codecs/rt712-sdca.h | 48 +- sound/soc/codecs/simple-mux.c | 55 +- sound/soc/codecs/tas2552.c | 1 - sound/soc/codecs/tas2764.c | 1 - sound/soc/codecs/tas2770.c | 1 - sound/soc/codecs/tas2780.c | 1 - sound/soc/codecs/tas2781-comlib.c | 21 +- sound/soc/codecs/tas2781-fmwlib.c | 89 +- sound/soc/codecs/tas2781-i2c.c | 235 +- sound/soc/codecs/tas5086.c | 27 +- sound/soc/codecs/tlv320adc3xxx.c | 106 +- sound/soc/codecs/tlv320adcx140.c | 1 - sound/soc/codecs/tlv320aic31xx.c | 1 - sound/soc/codecs/ts3a227e.c | 1 - sound/soc/codecs/wcd-mbhc-v2.c | 4 +- sound/soc/codecs/wcd-mbhc-v2.h | 4 +- sound/soc/codecs/wcd9335.c | 128 +- sound/soc/codecs/wcd934x.c | 72 +- sound/soc/codecs/wcd937x-sdw.c | 1137 ++++++++ sound/soc/codecs/wcd937x.c | 2971 ++++++++++++++++++++ sound/soc/codecs/wcd937x.h | 624 ++++ sound/soc/codecs/wcd938x-sdw.c | 4 +- sound/soc/codecs/wcd938x.c | 36 +- sound/soc/codecs/wcd938x.h | 10 +- sound/soc/codecs/wcd939x-sdw.c | 4 +- sound/soc/codecs/wcd939x.c | 176 +- sound/soc/codecs/wcd939x.h | 18 +- sound/soc/codecs/wm0010.c | 8 - sound/soc/codecs/wm_adsp.c | 2 +- sound/soc/codecs/wsa881x.c | 2 +- sound/soc/codecs/wsa883x.c | 11 +- sound/soc/codecs/wsa884x.c | 10 +- sound/soc/fsl/Kconfig | 18 +- sound/soc/fsl/Makefile | 4 +- sound/soc/fsl/fsl-asoc-card.c | 383 ++- sound/soc/fsl/fsl_aud2htx.c | 11 +- sound/soc/fsl/fsl_audmix.c | 16 +- sound/soc/fsl/fsl_easrc.c | 10 +- sound/soc/fsl/fsl_mqs.c | 46 +- sound/soc/fsl/fsl_qmc_audio.c | 591 ++-- sound/soc/fsl/fsl_rpmsg.c | 9 + sound/soc/fsl/fsl_sai.c | 141 +- sound/soc/fsl/fsl_sai.h | 4 +- sound/soc/fsl/fsl_xcvr.c | 181 +- sound/soc/fsl/fsl_xcvr.h | 91 + sound/soc/fsl/imx-audmix.c | 79 +- sound/soc/fsl/imx-es8328.c | 1 - sound/soc/fsl/imx-pcm-fiq.c | 1 + sound/soc/fsl/imx-rpmsg.c | 2 - sound/soc/fsl/imx-spdif.c | 103 - sound/soc/fsl/lpc3xxx-i2s.c | 375 +++ sound/soc/fsl/lpc3xxx-i2s.h | 80 + sound/soc/fsl/lpc3xxx-pcm.c | 72 + sound/soc/generic/audio-graph-card.c | 113 +- .../soc/generic/audio-graph-card2-custom-sample.c | 3 +- sound/soc/generic/audio-graph-card2.c | 191 +- sound/soc/generic/simple-card-utils.c | 129 +- sound/soc/generic/simple-card.c | 71 +- sound/soc/generic/test-component.c | 2 +- sound/soc/intel/avs/boards/es8336.c | 8 +- sound/soc/intel/avs/pcm.c | 4 +- sound/soc/intel/avs/topology.c | 2 +- sound/soc/intel/boards/Kconfig | 2 + sound/soc/intel/boards/bdw-rt5650.c | 2 +- sound/soc/intel/boards/ehl_rt5660.c | 2 +- sound/soc/intel/boards/kbl_da7219_max98357a.c | 4 +- sound/soc/intel/boards/kbl_da7219_max98927.c | 6 +- sound/soc/intel/boards/kbl_rt5660.c | 2 +- sound/soc/intel/boards/kbl_rt5663_max98927.c | 8 +- .../soc/intel/boards/kbl_rt5663_rt5514_max98927.c | 6 +- sound/soc/intel/boards/sof_board_helpers.h | 2 - sound/soc/intel/boards/sof_da7219.c | 55 +- sound/soc/intel/boards/sof_es8336.c | 2 +- sound/soc/intel/boards/sof_maxim_common.c | 114 +- sound/soc/intel/boards/sof_nau8825.c | 2 +- sound/soc/intel/boards/sof_realtek_common.c | 2 +- sound/soc/intel/boards/sof_rt5682.c | 2 +- sound/soc/intel/boards/sof_sdw.c | 64 +- sound/soc/intel/boards/sof_sdw_common.h | 6 +- sound/soc/intel/boards/sof_sdw_cs42l42.c | 11 +- sound/soc/intel/boards/sof_sdw_rt5682.c | 11 +- sound/soc/intel/boards/sof_sdw_rt700.c | 11 +- sound/soc/intel/boards/sof_sdw_rt711.c | 11 +- sound/soc/intel/boards/sof_sdw_rt_amp.c | 2 +- sound/soc/intel/boards/sof_sdw_rt_dmic.c | 14 +- .../soc/intel/boards/sof_sdw_rt_sdca_jack_common.c | 11 +- sound/soc/intel/boards/sof_wm8804.c | 2 +- sound/soc/intel/common/soc-acpi-intel-arl-match.c | 50 + sound/soc/intel/common/soc-acpi-intel-rpl-match.c | 50 + sound/soc/intel/skylake/skl-topology.c | 2 +- sound/soc/meson/axg-fifo.c | 2 +- sound/soc/meson/axg-frddr.c | 4 +- sound/soc/meson/axg-tdm.h | 2 +- sound/soc/meson/axg-toddr.c | 4 +- sound/soc/qcom/common.c | 35 + sound/soc/qcom/common.h | 3 + sound/soc/qcom/lpass-cpu.c | 4 + sound/soc/qcom/qdsp6/audioreach.c | 30 +- sound/soc/qcom/qdsp6/audioreach.h | 2 +- sound/soc/qcom/qdsp6/q6afe-dai.c | 16 +- sound/soc/qcom/qdsp6/q6apm-dai.c | 3 + sound/soc/qcom/qdsp6/q6apm-lpass-dais.c | 21 +- sound/soc/qcom/qdsp6/topology.c | 38 +- sound/soc/qcom/sc8280xp.c | 15 + sound/soc/qcom/x1e80100.c | 38 + sound/soc/rockchip/rockchip_i2s.c | 1 - sound/soc/rockchip/rockchip_spdif.c | 1 - sound/soc/samsung/Kconfig | 2 +- sound/soc/samsung/aries_wm8994.c | 2 +- sound/soc/samsung/midas_wm1811.c | 348 ++- sound/soc/sh/fsi.c | 2 +- sound/soc/sh/rcar/core.c | 2 +- sound/soc/soc-core.c | 4 +- sound/soc/soc-dai.c | 18 +- sound/soc/soc-dapm.c | 49 +- sound/soc/soc-ops.c | 26 +- sound/soc/soc-pcm.c | 26 +- sound/soc/soc-topology.c | 572 ++-- sound/soc/soc-utils.c | 19 +- sound/soc/sof/intel/hda.c | 4 +- sound/soc/sof/intel/pci-tgl.c | 4 +- sound/soc/sof/ipc3-topology.c | 14 +- sound/soc/sof/ipc4-topology.c | 71 +- sound/soc/sof/mediatek/mt8186/mt8186.c | 2 +- sound/soc/sof/mediatek/mt8195/mt8195.c | 2 +- sound/soc/sof/sof-audio.c | 20 +- sound/soc/sof/sof-audio.h | 9 +- sound/soc/sof/topology.c | 4 +- sound/soc/tegra/tegra210_i2s.c | 71 +- sound/soc/tegra/tegra210_i2s.h | 2 + tools/arch/arm64/include/asm/cputype.h | 6 + tools/arch/x86/include/asm/msr-index.h | 9 +- tools/arch/x86/include/uapi/asm/kvm.h | 22 +- tools/include/uapi/asm-generic/unistd.h | 5 +- tools/include/uapi/drm/i915_drm.h | 31 +- tools/include/uapi/linux/kvm.h | 4 +- tools/include/uapi/linux/stat.h | 4 +- tools/lib/bpf/features.c | 3 +- tools/perf/Makefile.perf | 1 + .../perf/arch/mips/entry/syscalls/syscall_n64.tbl | 1 + tools/perf/arch/powerpc/entry/syscalls/syscall.tbl | 1 + tools/perf/arch/s390/entry/syscalls/syscall.tbl | 1 + tools/perf/arch/x86/entry/syscalls/syscall_64.tbl | 3 +- tools/perf/builtin-record.c | 6 +- tools/perf/builtin-trace.c | 2 +- .../beauty/arch/x86/include/asm/irq_vectors.h | 8 +- tools/perf/trace/beauty/include/linux/socket.h | 3 +- tools/perf/trace/beauty/include/uapi/linux/fcntl.h | 14 +- tools/perf/trace/beauty/include/uapi/linux/prctl.h | 22 + tools/perf/trace/beauty/include/uapi/linux/stat.h | 4 +- tools/power/cpupower/utils/helpers/amd.c | 26 +- tools/testing/cxl/test/mem.c | 1 + tools/testing/selftests/alsa/Makefile | 2 +- .../selftests/bpf/progs/test_sk_storage_tracing.c | 2 +- tools/testing/selftests/cachestat/test_cachestat.c | 1 + .../selftests/filesystems/overlayfs/dev_in_maps.c | 1 + tools/testing/selftests/ftrace/config | 26 +- .../ftrace/test.d/dynevent/test_duplicates.tc | 2 +- .../ftrace/test.d/filter/event-filter-function.tc | 20 +- .../ftrace/test.d/kprobe/kprobe_eventname.tc | 3 +- tools/testing/selftests/futex/Makefile | 2 - tools/testing/selftests/futex/functional/Makefile | 2 +- .../selftests/futex/functional/futex_requeue_pi.c | 2 +- tools/testing/selftests/kvm/Makefile | 1 + .../selftests/kvm/s390x/shared_zeropage_test.c | 111 + tools/testing/selftests/net/hsr/config | 1 + tools/testing/selftests/net/lib.sh | 18 +- tools/testing/selftests/openat2/openat2_test.c | 1 + 661 files changed, 23899 insertions(+), 5937 deletions(-) create mode 100644 Documentation/devicetree/bindings/input/ilitek,ili2901.yaml delete mode 100644 Documentation/devicetree/bindings/sound/ak4104.txt delete mode 100644 Documentation/devicetree/bindings/sound/ak4554.txt delete mode 100644 Documentation/devicetree/bindings/sound/amlogic,g12a-tohdmitx.txt create mode 100644 Documentation/devicetree/bindings/sound/amlogic,g12a-tohdmitx.yaml create mode 100644 Documentation/devicetree/bindings/sound/asahi-kasei,ak4104.yaml rename Documentation/devicetree/bindings/sound/{ak4375.yaml => asahi-kasei,ak4375.yaml} (94%) create mode 100644 Documentation/devicetree/bindings/sound/asahi-kasei,ak4554.yaml rename Documentation/devicetree/bindings/sound/{ak4613.yaml => asahi-kasei,ak4613.yaml} (94%) create mode 100644 Documentation/devicetree/bindings/sound/asahi-kasei,ak4619.yaml rename Documentation/devicetree/bindings/sound/{ak4642.yaml => asahi-kasei,ak4642.yaml} (94%) create mode 100644 Documentation/devicetree/bindings/sound/cirrus,cs4270.yaml create mode 100644 Documentation/devicetree/bindings/sound/cirrus,cs42xx8.yaml create mode 100644 Documentation/devicetree/bindings/sound/cirrus,cs530x.yaml delete mode 100644 Documentation/devicetree/bindings/sound/cs4270.txt delete mode 100644 Documentation/devicetree/bindings/sound/cs42xx8.txt delete mode 100644 Documentation/devicetree/bindings/sound/everest,es7134.txt create mode 100644 Documentation/devicetree/bindings/sound/everest,es71x4.yaml delete mode 100644 Documentation/devicetree/bindings/sound/everest,es7241.txt create mode 100644 Documentation/devicetree/bindings/sound/everest,es7241.yaml delete mode 100644 Documentation/devicetree/bindings/sound/fsl,imx-audio-spdif.yaml rename Documentation/devicetree/bindings/sound/{sgtl5000.yaml => fsl,sgtl5000.yaml} (97%) rename Documentation/devicetree/bindings/sound/{linux,spdif-dit.yaml => linux,spdif.yaml} (75%) delete mode 100644 Documentation/devicetree/bindings/sound/maxim,max98088.txt create mode 100644 Documentation/devicetree/bindings/sound/maxim,max98088.yaml rename Documentation/devicetree/bindings/sound/{zl38060.yaml => mscc,zl38060.yaml} (96%) create mode 100644 Documentation/devicetree/bindings/sound/nxp,lpc3220-i2s.yaml delete mode 100644 Documentation/devicetree/bindings/sound/omap-mcpdm.txt delete mode 100644 Documentation/devicetree/bindings/sound/qcom,apq8096.txt create mode 100644 Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-digital-codec.yaml delete mode 100644 Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-digital.txt create mode 100644 Documentation/devicetree/bindings/sound/qcom,wcd937x-sdw.yaml create mode 100644 Documentation/devicetree/bindings/sound/qcom,wcd937x.yaml rename Documentation/devicetree/bindings/sound/{rt1019.yaml => realtek,rt1019.yaml} (90%) create mode 100644 Documentation/devicetree/bindings/sound/realtek,rt5514.yaml create mode 100644 Documentation/devicetree/bindings/sound/realtek,rt5631.yaml create mode 100644 Documentation/devicetree/bindings/sound/realtek,rt5645.yaml create mode 100644 Documentation/devicetree/bindings/sound/realtek,rt5659.yaml create mode 100644 Documentation/devicetree/bindings/sound/realtek,rt5677.yaml delete mode 100644 Documentation/devicetree/bindings/sound/rt5514.txt delete mode 100644 Documentation/devicetree/bindings/sound/rt5631.txt delete mode 100644 Documentation/devicetree/bindings/sound/rt5645.txt delete mode 100644 Documentation/devicetree/bindings/sound/rt5659.txt delete mode 100644 Documentation/devicetree/bindings/sound/rt5677.txt delete mode 100644 Documentation/devicetree/bindings/sound/spdif-receiver.txt delete mode 100644 Documentation/devicetree/bindings/sound/tas571x.txt create mode 100644 Documentation/devicetree/bindings/sound/ti,omap4-mcpdm.yaml rename Documentation/devicetree/bindings/sound/{tas2562.yaml => ti,tas2562.yaml} (97%) rename Documentation/devicetree/bindings/sound/{tas2770.yaml => ti,tas2770.yaml} (97%) rename Documentation/devicetree/bindings/sound/{tas27xx.yaml => ti,tas27xx.yaml} (97%) create mode 100644 Documentation/devicetree/bindings/sound/ti,tas57xx.yaml rename Documentation/devicetree/bindings/sound/{tas5805m.yaml => ti,tas5805m.yaml} (95%) rename Documentation/devicetree/bindings/sound/{tlv320adcx140.yaml => ti,tlv320adcx140.yaml} (99%) rename Documentation/devicetree/bindings/sound/{wm8750.yaml => wlf,wm8750.yaml} (92%) create mode 100644 Documentation/devicetree/bindings/sound/wlf,wm8782.yaml create mode 100644 Documentation/devicetree/bindings/sound/wlf,wm8804.yaml delete mode 100644 Documentation/devicetree/bindings/sound/wm8782.txt delete mode 100644 Documentation/devicetree/bindings/sound/wm8804.txt rename {include/linux => drivers/cpufreq}/amd-pstate.h (82%) create mode 100644 include/dt-bindings/sound/audio-graph.h create mode 100644 include/sound/rt1318.h create mode 100644 sound/soc/codecs/ak4619.c create mode 100644 sound/soc/codecs/cs530x-i2c.c create mode 100644 sound/soc/codecs/cs530x.c create mode 100644 sound/soc/codecs/cs530x.h create mode 100644 sound/soc/codecs/es8311.c create mode 100644 sound/soc/codecs/es8311.h create mode 100644 sound/soc/codecs/rt1318.c create mode 100644 sound/soc/codecs/rt1318.h create mode 100644 sound/soc/codecs/rt1320-sdw.c create mode 100644 sound/soc/codecs/rt1320-sdw.h create mode 100644 sound/soc/codecs/wcd937x-sdw.c create mode 100644 sound/soc/codecs/wcd937x.c create mode 100644 sound/soc/codecs/wcd937x.h delete mode 100644 sound/soc/fsl/imx-spdif.c create mode 100644 sound/soc/fsl/lpc3xxx-i2s.c create mode 100644 sound/soc/fsl/lpc3xxx-i2s.h create mode 100644 sound/soc/fsl/lpc3xxx-pcm.c create mode 100644 tools/testing/selftests/kvm/s390x/shared_zeropage_test.c

2 1

[PATCH v3 0/3] soundwire: bus: suppress probe deferral errors
by Johan Hovold 15 Jul '24

15 Jul '24

The soundwire bus code is incorrectly logging probe deferrals as errors. This series addresses that, cleans up the soundwire bus logging and drops the unused soudwire driver name field. Vinod, I booted linux-next yesterday and realised that these bogus error messages are still spamming the logs when booting x1e80100 and making it harder to see the valid warnings (which there were too many of). Would be nice to have this fixed in 6.11: [ 18.815950] wsa884x-codec sdw:4:0:0217:0204:00:0: Probe of wsa884x-codec failed: -517 [ 18.825093] wsa884x-codec sdw:1:0:0217:0204:00:0: Probe of wsa884x-codec failed: -517 [ 18.832335] wsa884x-codec sdw:4:0:0217:0204:00:1: Probe of wsa884x-codec failed: -517 [ 18.840870] wsa884x-codec sdw:1:0:0217:0204:00:1: Probe of wsa884x-codec failed: -517 [ 18.848463] wsa884x-codec sdw:1:0:0217:0204:00:0: Probe of wsa884x-codec failed: -517 Johan Changes in v3 - amend the update status error message with "at probe" to make it more descriptive (it's already unique) - drop the patch dropping a probe debug message Changes in v2 - drop probe error message completely - drop soundwire driver name field - cleanup probe warning messages - drop probe debug message Johan Hovold (3): soundwire: bus: suppress probe deferral errors soundwire: bus: drop unused driver name field soundwire: bus: clean up probe warnings drivers/soundwire/bus_type.c | 19 ++++--------------- include/linux/soundwire/sdw.h | 2 -- 2 files changed, 4 insertions(+), 17 deletions(-) -- 2.44.2

2 5

[PATCH v2] ASoC: codecs: wsa884x: Implement temperature reading and hwmon
by Krzysztof Kozlowski 14 Jul '24

14 Jul '24

Read temperature of the speaker and expose it via hwmon interface, which will be later used during calibration of speaker protection algorithms. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- Changes in v2: 1. Add missing dependency on HWMON for y!=m builds (kernel test robot report: undefined reference to `devm_hwmon_device_register_with_info'). --- sound/soc/codecs/Kconfig | 1 + sound/soc/codecs/wsa884x.c | 197 +++++++++++++++++++++++++++++++++++++ 2 files changed, 198 insertions(+) diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 97bb69c9848d..09a0b209bc2f 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -2447,6 +2447,7 @@ config SND_SOC_WSA883X config SND_SOC_WSA884X tristate "WSA884X Codec" depends on SOUNDWIRE + depends on HWMON || !HWMON select REGMAP_SOUNDWIRE help This enables support for Qualcomm WSA8840/WSA8845/WSA8845H Class-D diff --git a/sound/soc/codecs/wsa884x.c b/sound/soc/codecs/wsa884x.c index 7b19df9c1728..5f4acd66f942 100644 --- a/sound/soc/codecs/wsa884x.c +++ b/sound/soc/codecs/wsa884x.c @@ -5,11 +5,14 @@ */ #include <linux/bitfield.h> +#include <linux/cleanup.h> #include <linux/device.h> #include <linux/gpio/consumer.h> +#include <linux/hwmon.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/module.h> +#include <linux/mutex.h> #include <linux/pm_runtime.h> #include <linux/regmap.h> #include <linux/regulator/consumer.h> @@ -301,8 +304,28 @@ #define WSA884X_PA_FSM_MSK1 (WSA884X_DIG_CTRL0_BASE + 0x3b) #define WSA884X_PA_FSM_BYP_CTL (WSA884X_DIG_CTRL0_BASE + 0x3c) #define WSA884X_PA_FSM_BYP0 (WSA884X_DIG_CTRL0_BASE + 0x3d) +#define WSA884X_PA_FSM_BYP0_DC_CAL_EN_MASK 0x01 +#define WSA884X_PA_FSM_BYP0_DC_CAL_EN_SHIFT 0 +#define WSA884X_PA_FSM_BYP0_CLK_WD_EN_MASK 0x02 +#define WSA884X_PA_FSM_BYP0_CLK_WD_EN_SHIFT 1 +#define WSA884X_PA_FSM_BYP0_BG_EN_MASK 0x04 +#define WSA884X_PA_FSM_BYP0_BG_EN_SHIFT 2 +#define WSA884X_PA_FSM_BYP0_BOOST_EN_MASK 0x08 +#define WSA884X_PA_FSM_BYP0_BOOST_EN_SHIFT 3 +#define WSA884X_PA_FSM_BYP0_PA_EN_MASK 0x10 +#define WSA884X_PA_FSM_BYP0_PA_EN_SHIFT 4 +#define WSA884X_PA_FSM_BYP0_D_UNMUTE_MASK 0x20 +#define WSA884X_PA_FSM_BYP0_D_UNMUTE_SHIFT 5 +#define WSA884X_PA_FSM_BYP0_SPKR_PROT_EN_MASK 0x40 +#define WSA884X_PA_FSM_BYP0_SPKR_PROT_EN_SHIFT 6 +#define WSA884X_PA_FSM_BYP0_TSADC_EN_MASK 0x80 +#define WSA884X_PA_FSM_BYP0_TSADC_EN_SHIFT 7 #define WSA884X_PA_FSM_BYP1 (WSA884X_DIG_CTRL0_BASE + 0x3e) #define WSA884X_TADC_VALUE_CTL (WSA884X_DIG_CTRL0_BASE + 0x50) +#define WSA884X_TADC_VALUE_CTL_TEMP_VALUE_RD_EN_MASK 0x01 +#define WSA884X_TADC_VALUE_CTL_TEMP_VALUE_RD_EN_SHIFT 0 +#define WSA884X_TADC_VALUE_CTL_VBAT_VALUE_RD_EN_MASK 0x02 +#define WSA884X_TADC_VALUE_CTL_VBAT_VALUE_RD_EN_SHIFT 1 #define WSA884X_TEMP_DETECT_CTL (WSA884X_DIG_CTRL0_BASE + 0x51) #define WSA884X_TEMP_DIN_MSB (WSA884X_DIG_CTRL0_BASE + 0x52) #define WSA884X_TEMP_DIN_LSB (WSA884X_DIG_CTRL0_BASE + 0x53) @@ -691,6 +714,17 @@ SNDRV_PCM_FMTBIT_S24_LE |\ SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S32_LE) +/* Two-point trimming for temperature calibration */ +#define WSA884X_T1_TEMP -10L +#define WSA884X_T2_TEMP 150L + +/* + * Device will report senseless data in many cases, so discard any measurements + * outside of valid range. + */ +#define WSA884X_LOW_TEMP_THRESHOLD 5 +#define WSA884X_HIGH_TEMP_THRESHOLD 45 + struct wsa884x_priv { struct regmap *regmap; struct device *dev; @@ -706,6 +740,13 @@ struct wsa884x_priv { int active_ports; int dev_mode; bool hw_init; + /* + * Protects temperature reading code (related to speaker protection) and + * fields: temperature and pa_on. + */ + struct mutex sp_lock; + unsigned int temperature; + bool pa_on; }; enum { @@ -1650,6 +1691,10 @@ static int wsa884x_spkr_event(struct snd_soc_dapm_widget *w, switch (event) { case SND_SOC_DAPM_POST_PMU: + mutex_lock(&wsa884x->sp_lock); + wsa884x->pa_on = true; + mutex_unlock(&wsa884x->sp_lock); + wsa884x_spkr_post_pmu(component, wsa884x); snd_soc_component_write_field(component, WSA884X_PDM_WD_CTL, @@ -1661,6 +1706,10 @@ static int wsa884x_spkr_event(struct snd_soc_dapm_widget *w, snd_soc_component_write_field(component, WSA884X_PDM_WD_CTL, WSA884X_PDM_WD_CTL_PDM_WD_EN_MASK, 0x0); + + mutex_lock(&wsa884x->sp_lock); + wsa884x->pa_on = false; + mutex_unlock(&wsa884x->sp_lock); break; } @@ -1800,6 +1849,144 @@ static struct snd_soc_dai_driver wsa884x_dais[] = { }, }; +static int wsa884x_get_temp(struct wsa884x_priv *wsa884x, long *temp) +{ + unsigned int d1_msb = 0, d1_lsb = 0, d2_msb = 0, d2_lsb = 0; + unsigned int dmeas_msb = 0, dmeas_lsb = 0; + int d1, d2, dmeas; + unsigned int mask; + long val; + int ret; + + guard(mutex)(&wsa884x->sp_lock); + + if (wsa884x->pa_on) { + /* + * Reading temperature is possible only when Power Amplifier is + * off. Report last cached data. + */ + *temp = wsa884x->temperature; + return 0; + } + + ret = pm_runtime_resume_and_get(wsa884x->dev); + if (ret < 0) + return ret; + + mask = WSA884X_PA_FSM_BYP0_DC_CAL_EN_MASK | + WSA884X_PA_FSM_BYP0_CLK_WD_EN_MASK | + WSA884X_PA_FSM_BYP0_BG_EN_MASK | + WSA884X_PA_FSM_BYP0_D_UNMUTE_MASK | + WSA884X_PA_FSM_BYP0_SPKR_PROT_EN_MASK | + WSA884X_PA_FSM_BYP0_TSADC_EN_MASK; + /* + * Here and further do not care about read or update failures. + * For example, before turning on Power Amplifier for the first + * time, reading WSA884X_TEMP_DIN_MSB will always return 0. + * Instead, check if returned value is within reasonable + * thresholds. + */ + regmap_update_bits(wsa884x->regmap, WSA884X_PA_FSM_BYP0, mask, mask); + + regmap_update_bits(wsa884x->regmap, WSA884X_TADC_VALUE_CTL, + WSA884X_TADC_VALUE_CTL_TEMP_VALUE_RD_EN_MASK, + FIELD_PREP(WSA884X_TADC_VALUE_CTL_TEMP_VALUE_RD_EN_MASK, 0x0)); + + regmap_read(wsa884x->regmap, WSA884X_TEMP_DIN_MSB, &dmeas_msb); + regmap_read(wsa884x->regmap, WSA884X_TEMP_DIN_LSB, &dmeas_lsb); + + regmap_update_bits(wsa884x->regmap, WSA884X_TADC_VALUE_CTL, + WSA884X_TADC_VALUE_CTL_TEMP_VALUE_RD_EN_MASK, + FIELD_PREP(WSA884X_TADC_VALUE_CTL_TEMP_VALUE_RD_EN_MASK, 0x1)); + + regmap_read(wsa884x->regmap, WSA884X_OTP_REG_1, &d1_msb); + regmap_read(wsa884x->regmap, WSA884X_OTP_REG_2, &d1_lsb); + regmap_read(wsa884x->regmap, WSA884X_OTP_REG_3, &d2_msb); + regmap_read(wsa884x->regmap, WSA884X_OTP_REG_4, &d2_lsb); + + regmap_update_bits(wsa884x->regmap, WSA884X_PA_FSM_BYP0, mask, 0x0); + + dmeas = (((dmeas_msb & 0xff) << 0x8) | (dmeas_lsb & 0xff)) >> 0x6; + d1 = (((d1_msb & 0xff) << 0x8) | (d1_lsb & 0xff)) >> 0x6; + d2 = (((d2_msb & 0xff) << 0x8) | (d2_lsb & 0xff)) >> 0x6; + + if (d1 == d2) { + /* Incorrect data in OTP? */ + ret = -EINVAL; + goto out; + } + + val = WSA884X_T1_TEMP + (((dmeas - d1) * (WSA884X_T2_TEMP - WSA884X_T1_TEMP))/(d2 - d1)); + + dev_dbg(wsa884x->dev, "Measured temp %ld (dmeas=%d, d1=%d, d2=%d)\n", + val, dmeas, d1, d2); + + if ((val > WSA884X_LOW_TEMP_THRESHOLD) && + (val < WSA884X_HIGH_TEMP_THRESHOLD)) { + wsa884x->temperature = val; + *temp = val; + ret = 0; + } else { + ret = -EAGAIN; + } + +out: + pm_runtime_mark_last_busy(wsa884x->dev); + pm_runtime_put_autosuspend(wsa884x->dev); + + return ret; +} + +static umode_t wsa884x_hwmon_is_visible(const void *data, + enum hwmon_sensor_types type, u32 attr, + int channel) +{ + if (type != hwmon_temp) + return 0; + + switch (attr) { + case hwmon_temp_input: + return 0444; + default: + break; + } + + return 0; +} + +static int wsa884x_hwmon_read(struct device *dev, + enum hwmon_sensor_types type, + u32 attr, int channel, long *temp) +{ + int ret; + + switch (attr) { + case hwmon_temp_input: + ret = wsa884x_get_temp(dev_get_drvdata(dev), temp); + break; + default: + ret = -EOPNOTSUPP; + break; + } + + return ret; +} + +static const struct hwmon_channel_info *const wsa884x_hwmon_info[] = { + HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT), + NULL +}; + +static const struct hwmon_ops wsa884x_hwmon_ops = { + .is_visible = wsa884x_hwmon_is_visible, + .read = wsa884x_hwmon_read, +}; + +static const struct hwmon_chip_info wsa884x_hwmon_chip_info = { + .ops = &wsa884x_hwmon_ops, + .info = wsa884x_hwmon_info, +}; + static void wsa884x_reset_powerdown(void *data) { struct wsa884x_priv *wsa884x = data; @@ -1849,6 +2036,7 @@ static int wsa884x_probe(struct sdw_slave *pdev, { struct device *dev = &pdev->dev; struct wsa884x_priv *wsa884x; + struct device *hwmon; unsigned int i; int ret; @@ -1856,6 +2044,8 @@ static int wsa884x_probe(struct sdw_slave *pdev, if (!wsa884x) return -ENOMEM; + mutex_init(&wsa884x->sp_lock); + for (i = 0; i < WSA884X_SUPPLIES_NUM; i++) wsa884x->supplies[i].supply = wsa884x_supply_name[i]; @@ -1913,6 +2103,13 @@ static int wsa884x_probe(struct sdw_slave *pdev, regcache_cache_only(wsa884x->regmap, true); wsa884x->hw_init = true; + hwmon = devm_hwmon_device_register_with_info(dev, "wsa884x", wsa884x, + &wsa884x_hwmon_chip_info, + NULL); + if (IS_ERR(hwmon)) + return dev_err_probe(dev, PTR_ERR(hwmon), + "Failed to register hwmon sensor\n"); + pm_runtime_set_autosuspend_delay(dev, 3000); pm_runtime_use_autosuspend(dev); pm_runtime_mark_last_busy(dev); -- 2.43.0

1 2

Handling complex matrix mixers in ALSA
by Asahi Lina 13 Jul '24

13 Jul '24

Hi, I'm reverse engineering and implementing support for the RME Digiface USB, which is an ADAT interface with a non-class-compliant interface (probably similar to other RME interfaces like the MADIface, but I don't have any others to test). The basic audio streaming works fine with an entry in quirks-table.h and a format quirk to set the system sample rate in quirks.c. Now I need to figure out how to implement the mixer controls. Currently I have the snd-usb-audio driver claiming only interface #0 (streaming) and I use a Python script to control the mixer/settings directly with libusb (control transfers and interface #1). This works fine and there's some prior art for this in the firewire world (for example, snd-dice doesn't do any mixer control stuff and you have to use ffado-mixer to control everything from userspace) but I assume it's not really the best way to go? The problem is that the device has a 66x34 matrix mixer, with up to 2048 cross points enabled at once. Exposing each cross point as an ALSA mixer control (similar to how mixer_scarlett2.c does it) would mean 2244 controls just for the mixer... which seems like a bit too much. On top of that there is also VU meter feedback for all the inputs/outputs, as well as general fader controls for each output and global output configs and status. I'm not sure about the VU meters, but everything else sounds like it would map fine to normal mixer controls. Is there some recommended way to expose this kind of matrix mixer interface to userspace? I think for something like this you pretty much have to rely on device-specific tools to make the UX manageable, so maybe hwdep... but at least exposing everything as an ALSA control would have the advantage of supporting save/restore with something like alsactl. So I don't really know what's the way to go here. System settings/general status/output faders go via control transfers, while interface #1 has an interrupt IN endpoint (streaming state feedback, not very useful) and two bulk endpoints (matrix mixer control out, VU meter data in). There's another pair of bulk endpoints in interface #2 which I'm guessing are for firmware updates (I haven't looked at that part). So in principle it's not crazy to expose all the system controls/output faders as mixer controls in ALSA and leave interface #1 entirely unclaimed so a userspace program can directly configure the matrix mixer and access VU meter levels. There is a global mixer enable bit (controlled via ctl transfer), so if that is exposed as an ALSA control and disabled by default the interface will operate as a 1:1 in/out interface without needing any custom userspace to configure the mixer. There's one other quirky thing: it also needs a way to set the sample rate as a mixer control, because you need to be able to configure the rate even when the PCM device is not open (since that affects stand-alone mixer operation). I imagine the right logic here would be to have a selector control for the system sample rate, and automatically change it and lock it when the PCM is opened with a given rate? Any thoughts welcome ^^ ~~ Lina

6 8

[PATCH v3] ASoC: rt1318: Add RT1318 audio amplifier driver
by Jack Yu 12 Jul '24

12 Jul '24

This is the initial i2s-based amplifier driver for rt1318. Signed-off-by: Jack Yu <jack.yu(a)realtek.com> --- include/sound/rt1318.h | 16 + sound/soc/codecs/Kconfig | 5 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/rt1318.c | 1354 +++++++++++++++++++++++++++++++++++++ sound/soc/codecs/rt1318.h | 342 ++++++++++ 5 files changed, 1719 insertions(+) create mode 100644 include/sound/rt1318.h create mode 100644 sound/soc/codecs/rt1318.c create mode 100644 sound/soc/codecs/rt1318.h diff --git a/include/sound/rt1318.h b/include/sound/rt1318.h new file mode 100644 index 000000000000..fe6bff06036c --- /dev/null +++ b/include/sound/rt1318.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * linux/sound/rt1318.h -- Platform data for RT1318 + * + * Copyright 2024 Realtek Semiconductor Corp. + */ + +#ifndef __LINUX_SND_RT1318_H +#define __LINUX_SND_RT1318_H + +struct rt1318_platform_data { + unsigned int init_r0_l; + unsigned int init_r0_r; +}; + +#endif diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 7b99556f24d3..a99cb26eb280 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -221,6 +221,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_RT722_SDCA_SDW imply SND_SOC_RT1308_SDW imply SND_SOC_RT1316_SDW + imply SND_SOC_RT1318 imply SND_SOC_RT1318_SDW imply SND_SOC_RT1320_SDW imply SND_SOC_RT9120 @@ -1576,6 +1577,10 @@ config SND_SOC_RT1316_SDW depends on SOUNDWIRE select REGMAP_SOUNDWIRE +config SND_SOC_RT1318 + tristate + depends on I2C + config SND_SOC_RT1318_SDW tristate "Realtek RT1318 Codec - SDW" depends on SOUNDWIRE diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index ca69f35cc0f7..ad0f77224c74 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -222,6 +222,7 @@ snd-soc-rt1305-y := rt1305.o snd-soc-rt1308-y := rt1308.o snd-soc-rt1308-sdw-y := rt1308-sdw.o snd-soc-rt1316-sdw-y := rt1316-sdw.o +snd-soc-rt1318-y := rt1318.o snd-soc-rt1318-sdw-y := rt1318-sdw.o snd-soc-rt1320-sdw-y := rt1320-sdw.o snd-soc-rt274-y := rt274.o @@ -618,6 +619,7 @@ obj-$(CONFIG_SND_SOC_RT1305) += snd-soc-rt1305.o obj-$(CONFIG_SND_SOC_RT1308) += snd-soc-rt1308.o obj-$(CONFIG_SND_SOC_RT1308_SDW) += snd-soc-rt1308-sdw.o obj-$(CONFIG_SND_SOC_RT1316_SDW) += snd-soc-rt1316-sdw.o +obj-$(CONFIG_SND_SOC_RT1318) += snd-soc-rt1318.o obj-$(CONFIG_SND_SOC_RT1318_SDW) += snd-soc-rt1318-sdw.o obj-$(CONFIG_SND_SOC_RT1320_SDW) += snd-soc-rt1320-sdw.o obj-$(CONFIG_SND_SOC_RT274) += snd-soc-rt274.o diff --git a/sound/soc/codecs/rt1318.c b/sound/soc/codecs/rt1318.c new file mode 100644 index 000000000000..4e47db4fc7fb --- /dev/null +++ b/sound/soc/codecs/rt1318.c @@ -0,0 +1,1354 @@ +// SPDX-License-Identifier: GPL-2.0-only +// +// rt1318.c -- RT1318 ALSA SoC audio amplifier driver +// Author: Jack Yu <jack.yu(a)realtek.com> +// +// Copyright(c) 2024 Realtek Semiconductor Corp. +// +// + +#include <linux/acpi.h> +#include <linux/fs.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/regmap.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/firmware.h> +#include <linux/gpio.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/initval.h> +#include <sound/tlv.h> +#include <sound/rt1318.h> + +#include "rt1318.h" + +static struct reg_sequence init_list[] = { + { 0x0000C000, 0x01}, + { 0x0000F20D, 0x00}, + { 0x0000F212, 0x3E}, + { 0x0000C001, 0x02}, + { 0x0000C003, 0x22}, + { 0x0000C004, 0x44}, + { 0x0000C005, 0x44}, + { 0x0000C007, 0x64}, + { 0x0000C00E, 0xE7}, + { 0x0000F223, 0x7F}, + { 0x0000F224, 0xDB}, + { 0x0000F225, 0xEE}, + { 0x0000F226, 0x3F}, + { 0x0000F227, 0x0F}, + { 0x0000F21A, 0x78}, + { 0x0000F242, 0x3C}, + { 0x0000C120, 0x40}, + { 0x0000C125, 0x03}, + { 0x0000C321, 0x0A}, + { 0x0000C200, 0xD8}, + { 0x0000C201, 0x27}, + { 0x0000C202, 0x0F}, + { 0x0000C400, 0x0E}, + { 0x0000C401, 0x43}, + { 0x0000C402, 0xE0}, + { 0x0000C403, 0x00}, + { 0x0000C404, 0x4C}, + { 0x0000C406, 0x40}, + { 0x0000C407, 0x02}, + { 0x0000C408, 0x3F}, + { 0x0000C300, 0x01}, + { 0x0000C125, 0x03}, + { 0x0000DF00, 0x10}, + { 0x0000F20B, 0x2A}, + { 0x0000DF5F, 0x01}, + { 0x0000DF60, 0xA7}, + { 0x0000C203, 0x84}, + { 0x0000C206, 0x78}, + { 0x0000F10A, 0x09}, + { 0x0000F10B, 0x4C}, + { 0x0000F104, 0xF4}, + { 0x0000F105, 0x03}, + { 0x0000F109, 0xE0}, + { 0x0000F10B, 0x5C}, + { 0x0000F104, 0xF4}, + { 0x0000F105, 0x04}, + { 0x0000F109, 0x65}, + { 0x0000F10B, 0x5C}, + { 0x0000F104, 0xF4}, + { 0x0000F105, 0x02}, + { 0x0000F109, 0x30}, + { 0x0000F10B, 0x5C}, + { 0x0000E706, 0x0F}, + { 0x0000E707, 0x30}, + { 0x0000E806, 0x0F}, + { 0x0000E807, 0x30}, + { 0x0000CE04, 0x03}, + { 0x0000CE05, 0x5F}, + { 0x0000CE06, 0xA2}, + { 0x0000CE07, 0x6B}, + { 0x0000CF04, 0x03}, + { 0x0000CF05, 0x5F}, + { 0x0000CF06, 0xA2}, + { 0x0000CF07, 0x6B}, + { 0x0000CE60, 0xE3}, + { 0x0000C130, 0x51}, + { 0x0000E000, 0xA8}, + { 0x0000F102, 0x00}, + { 0x0000F103, 0x00}, + { 0x0000F104, 0xF5}, + { 0x0000F105, 0x23}, + { 0x0000F109, 0x04}, + { 0x0000F10A, 0x0B}, + { 0x0000F10B, 0x4C}, + { 0x0000F10B, 0x5C}, + { 0x41001888, 0x00}, + { 0x0000C121, 0x0B}, + { 0x0000F102, 0x00}, + { 0x0000F103, 0x00}, + { 0x0000F104, 0xF5}, + { 0x0000F105, 0x23}, + { 0x0000F109, 0x00}, + { 0x0000F10A, 0x0B}, + { 0x0000F10B, 0x4C}, + { 0x0000F10B, 0x5C}, + { 0x0000F800, 0x20}, + { 0x0000CA00, 0x80}, + { 0x0000CA10, 0x00}, + { 0x0000CA02, 0x78}, + { 0x0000CA12, 0x78}, + { 0x0000ED00, 0x90}, + { 0x0000E604, 0x00}, + { 0x0000DB00, 0x0C}, + { 0x0000DD00, 0x0C}, + { 0x0000DC19, 0x00}, + { 0x0000DC1A, 0x6A}, + { 0x0000DC1B, 0xAA}, + { 0x0000DC1C, 0xAB}, + { 0x0000DC1D, 0x00}, + { 0x0000DC1E, 0x16}, + { 0x0000DC1F, 0xDB}, + { 0x0000DC20, 0x6D}, + { 0x0000DE19, 0x00}, + { 0x0000DE1A, 0x6A}, + { 0x0000DE1B, 0xAA}, + { 0x0000DE1C, 0xAB}, + { 0x0000DE1D, 0x00}, + { 0x0000DE1E, 0x16}, + { 0x0000DE1F, 0xDB}, + { 0x0000DE20, 0x6D}, + { 0x0000DB32, 0x00}, + { 0x0000DD32, 0x00}, + { 0x0000DB33, 0x0A}, + { 0x0000DD33, 0x0A}, + { 0x0000DB34, 0x1A}, + { 0x0000DD34, 0x1A}, + { 0x0000DB15, 0xEF}, + { 0x0000DD15, 0xEF}, + { 0x0000DB17, 0xEF}, + { 0x0000DD17, 0xEF}, + { 0x0000DB94, 0x70}, + { 0x0000DD94, 0x70}, + { 0x0000DB19, 0x40}, + { 0x0000DD19, 0x40}, + { 0x0000DB12, 0xC0}, + { 0x0000DD12, 0xC0}, + { 0x0000DB00, 0x4C}, + { 0x0000DB04, 0x05}, + { 0x0000DB05, 0x03}, + { 0x0000DD04, 0x05}, + { 0x0000DD05, 0x03}, + { 0x0000DBBB, 0x09}, + { 0x0000DBBC, 0x30}, + { 0x0000DBBD, 0xF0}, + { 0x0000DBBE, 0xF1}, + { 0x0000DDBB, 0x09}, + { 0x0000DDBC, 0x30}, + { 0x0000DDBD, 0xF0}, + { 0x0000DDBE, 0xF1}, + { 0x0000DB01, 0x79}, + { 0x0000DD01, 0x79}, + { 0x0000DB08, 0x40}, + { 0x0000DD08, 0x40}, + { 0x0000DC52, 0xEF}, + { 0x0000DE52, 0xEF}, + { 0x0000DB00, 0xCC}, + { 0x0000CC2C, 0x00}, + { 0x0000CC2D, 0x2A}, + { 0x0000CC2E, 0x83}, + { 0x0000CC2F, 0xA8}, + { 0x0000CD2C, 0x00}, + { 0x0000CD2D, 0x2A}, + { 0x0000CD2E, 0x83}, + { 0x0000CD2F, 0xA8}, + { 0x0000CC24, 0x00}, + { 0x0000CC25, 0x51}, + { 0x0000CC26, 0xEB}, + { 0x0000CC27, 0x85}, + { 0x0000CD24, 0x00}, + { 0x0000CD25, 0x51}, + { 0x0000CD26, 0xEB}, + { 0x0000CD27, 0x85}, + { 0x0000CC20, 0x00}, + { 0x0000CC21, 0x00}, + { 0x0000CC22, 0x43}, + { 0x0000CD20, 0x00}, + { 0x0000CD21, 0x00}, + { 0x0000CD22, 0x43}, + { 0x0000CC16, 0x0F}, + { 0x0000CC17, 0x00}, + { 0x0000CD16, 0x0F}, + { 0x0000CD17, 0x00}, + { 0x0000CC29, 0x5D}, + { 0x0000CC2A, 0xC0}, + { 0x0000CD29, 0x5D}, + { 0x0000CD2A, 0xC0}, + { 0x0000CC31, 0x20}, + { 0x0000CC32, 0x00}, + { 0x0000CC33, 0x00}, + { 0x0000CC34, 0x00}, + { 0x0000CD31, 0x20}, + { 0x0000CD32, 0x00}, + { 0x0000CD33, 0x00}, + { 0x0000CD34, 0x00}, + { 0x0000CC36, 0x79}, + { 0x0000CC37, 0x99}, + { 0x0000CC38, 0x99}, + { 0x0000CC39, 0x99}, + { 0x0000CD36, 0x79}, + { 0x0000CD37, 0x99}, + { 0x0000CD38, 0x99}, + { 0x0000CD39, 0x99}, + { 0x0000CC09, 0x00}, + { 0x0000CC0A, 0x07}, + { 0x0000CC0B, 0x5F}, + { 0x0000CC0C, 0x6F}, + { 0x0000CD09, 0x00}, + { 0x0000CD0A, 0x07}, + { 0x0000CD0B, 0x5F}, + { 0x0000CD0C, 0x6F}, + { 0x0000CC0E, 0x00}, + { 0x0000CC0F, 0x03}, + { 0x0000CC10, 0xAF}, + { 0x0000CC11, 0xB7}, + { 0x0000CD0E, 0x00}, + { 0x0000CD0F, 0x03}, + { 0x0000CD10, 0xAF}, + { 0x0000CD11, 0xB7}, + { 0x0000CCD6, 0x00}, + { 0x0000CCD7, 0x03}, + { 0x0000CDD6, 0x00}, + { 0x0000CDD7, 0x03}, + { 0x0000CCD8, 0x00}, + { 0x0000CCD9, 0x03}, + { 0x0000CDD8, 0x00}, + { 0x0000CDD9, 0x03}, + { 0x0000CCDA, 0x00}, + { 0x0000CCDB, 0x03}, + { 0x0000CDDA, 0x00}, + { 0x0000CDDB, 0x03}, + { 0x0000C320, 0x20}, + { 0x0000C203, 0x9C}, +}; +#define rt1318_INIT_REG_LEN ARRAY_SIZE(init_list) + +static const struct reg_default rt1318_reg[] = { + { 0xc000, 0x00 }, + { 0xc001, 0x43 }, + { 0xc003, 0x22 }, + { 0xc004, 0x44 }, + { 0xc005, 0x44 }, + { 0xc006, 0x33 }, + { 0xc007, 0x64 }, + { 0xc008, 0x05 }, + { 0xc00a, 0xfc }, + { 0xc00b, 0x0f }, + { 0xc00c, 0x0e }, + { 0xc00d, 0xef }, + { 0xc00e, 0xe5 }, + { 0xc00f, 0xff }, + { 0xc120, 0xc0 }, + { 0xc121, 0x00 }, + { 0xc122, 0x00 }, + { 0xc123, 0x14 }, + { 0xc125, 0x00 }, + { 0xc130, 0x59 }, + { 0xc200, 0x00 }, + { 0xc201, 0x00 }, + { 0xc202, 0x00 }, + { 0xc203, 0x04 }, + { 0xc204, 0x00 }, + { 0xc205, 0x00 }, + { 0xc206, 0x68 }, + { 0xc207, 0x70 }, + { 0xc208, 0x00 }, + { 0xc20a, 0x00 }, + { 0xc20b, 0x01 }, + { 0xc20c, 0x7f }, + { 0xc20d, 0x01 }, + { 0xc20e, 0x7f }, + { 0xc300, 0x00 }, + { 0xc301, 0x00 }, + { 0xc303, 0x80 }, + { 0xc320, 0x00 }, + { 0xc321, 0x09 }, + { 0xc322, 0x02 }, + { 0xc400, 0x00 }, + { 0xc401, 0x00 }, + { 0xc402, 0x00 }, + { 0xc403, 0x00 }, + { 0xc404, 0x00 }, + { 0xc405, 0x00 }, + { 0xc406, 0x00 }, + { 0xc407, 0x00 }, + { 0xc408, 0x00 }, + { 0xc410, 0x04 }, + { 0xc430, 0x00 }, + { 0xc431, 0x00 }, + { 0xca00, 0x10 }, + { 0xca01, 0x00 }, + { 0xca02, 0x0b }, + { 0xca10, 0x10 }, + { 0xca11, 0x00 }, + { 0xca12, 0x0b }, + { 0xce04, 0x08 }, + { 0xce05, 0x00 }, + { 0xce06, 0x00 }, + { 0xce07, 0x00 }, + { 0xce60, 0x63 }, + { 0xcf04, 0x08 }, + { 0xcf05, 0x00 }, + { 0xcf06, 0x00 }, + { 0xcf07, 0x00 }, + { 0xdb00, 0x00 }, + { 0xdb08, 0x40 }, + { 0xdb12, 0x00 }, + { 0xdb35, 0x00 }, + { 0xdbb5, 0x00 }, + { 0xdbb6, 0x40 }, + { 0xdbb7, 0x00 }, + { 0xdbb8, 0x00 }, + { 0xdbc5, 0x00 }, + { 0xdbc6, 0x00 }, + { 0xdbc7, 0x00 }, + { 0xdbc8, 0x00 }, + { 0xdd08, 0x40 }, + { 0xdd12, 0x00 }, + { 0xdd35, 0x00 }, + { 0xddb5, 0x00 }, + { 0xddb6, 0x40 }, + { 0xddb7, 0x00 }, + { 0xddb8, 0x00 }, + { 0xddc5, 0x00 }, + { 0xddc6, 0x00 }, + { 0xddc7, 0x00 }, + { 0xddc8, 0x00 }, + { 0xdd93, 0x00 }, + { 0xdd94, 0x64 }, + { 0xdf00, 0x00 }, + { 0xdf5f, 0x00 }, + { 0xdf60, 0x00 }, + { 0xe000, 0x08 }, + { 0xe300, 0xa0 }, + { 0xe400, 0x22 }, + { 0xe706, 0x2f }, + { 0xe707, 0x2f }, + { 0xe806, 0x2f }, + { 0xe807, 0x2f }, + { 0xea00, 0x43 }, + { 0xed00, 0x80 }, + { 0xed01, 0x0f }, + { 0xed02, 0xff }, + { 0xed03, 0x00 }, + { 0xed04, 0x00 }, + { 0xed05, 0x0f }, + { 0xed06, 0xff }, + { 0xf010, 0x10 }, + { 0xf011, 0xec }, + { 0xf012, 0x68 }, + { 0xf013, 0x21 }, + { 0xf102, 0x00 }, + { 0xf103, 0x00 }, + { 0xf104, 0x00 }, + { 0xf105, 0x00 }, + { 0xf106, 0x00 }, + { 0xf107, 0x00 }, + { 0xf108, 0x00 }, + { 0xf109, 0x00 }, + { 0xf10a, 0x03 }, + { 0xf10b, 0x40 }, + { 0xf20b, 0x28 }, + { 0xf20d, 0x00 }, + { 0xf212, 0x00 }, + { 0xf21a, 0x00 }, + { 0xf223, 0x40 }, + { 0xf224, 0x00 }, + { 0xf225, 0x00 }, + { 0xf226, 0x00 }, + { 0xf227, 0x00 }, + { 0xf242, 0x0c }, + { 0xf800, 0x00 }, + { 0xf801, 0x12 }, + { 0xf802, 0xe0 }, + { 0xf803, 0x2f }, + { 0xf804, 0x00 }, + { 0xf805, 0x00 }, + { 0xf806, 0x07 }, + { 0xf807, 0xff }, +}; + +static bool rt1318_volatile_register(struct device *dev, unsigned int reg) +{ + switch (reg) { + case 0xc000: + case 0xc301: + case 0xc410: + case 0xc430 ... 0xc431: + case 0xdb06: + case 0xdb12: + case 0xdb1d ... 0xdb1f: + case 0xdb35: + case 0xdb37: + case 0xdb8a ... 0xdb92: + case 0xdbc5 ... 0xdbc8: + case 0xdc2b ... 0xdc49: + case 0xdd0b: + case 0xdd12: + case 0xdd1d ... 0xdd1f: + case 0xdd35: + case 0xdd8a ... 0xdd92: + case 0xddc5 ... 0xddc8: + case 0xde2b ... 0xde44: + case 0xdf4a ... 0xdf55: + case 0xe224 ... 0xe23b: + case 0xea01: + case 0xebc5: + case 0xebc8: + case 0xebcb ... 0xebcc: + case 0xed03 ... 0xed06: + case 0xf010 ... 0xf014: + return true; + + default: + return false; + } +} + +static bool rt1318_readable_register(struct device *dev, unsigned int reg) +{ + switch (reg) { + case 0xc000 ... 0xc00f: + case 0xc120 ... 0xc130: + case 0xc200 ... 0xc20e: + case 0xc300 ... 0xc303: + case 0xc320 ... 0xc322: + case 0xc400 ... 0xc408: + case 0xc430 ... 0xc431: + case 0xca00 ... 0xca02: + case 0xca10 ... 0xca12: + case 0xcb00 ... 0xcb0b: + case 0xcc00 ... 0xcce5: + case 0xcd00 ... 0xcde5: + case 0xce00 ... 0xce6a: + case 0xcf00 ... 0xcf53: + case 0xd000 ... 0xd0cc: + case 0xd100 ... 0xd1b9: + case 0xdb00 ... 0xdc53: + case 0xdd00 ... 0xde53: + case 0xdf00 ... 0xdf6b: + case 0xe000: + case 0xe300: + case 0xe400: + case 0xe706 ... 0xe707: + case 0xe806 ... 0xe807: + case 0xea00: + case 0xeb00 ... 0xebcc: + case 0xec00 ... 0xecb9: + case 0xed00 ... 0xed06: + case 0xf010 ... 0xf014: + case 0xf102 ... 0xf10b: + case 0xf20b: + case 0xf20d ... 0xf242: + case 0xf800 ... 0xf807: + return true; + default: + return false; + } +} + +static int rt1318_dac_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + regmap_update_bits(rt1318->regmap, RT1318_PWR_STA1, + RT1318_PDB_CTRL_MASK, RT1318_PDB_CTRL_HIGH); + break; + + case SND_SOC_DAPM_POST_PMD: + regmap_update_bits(rt1318->regmap, RT1318_PWR_STA1, + RT1318_PDB_CTRL_MASK, RT1318_PDB_CTRL_LOW); + break; + + default: + break; + } + return 0; +} + +static int rt1318_dvol_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + + rt1318->rt1318_dvol = ucontrol->value.integer.value[0]; + + if (rt1318->rt1318_dvol <= RT1318_DVOL_STEP && rt1318->rt1318_dvol >= 0) { + regmap_write(rt1318->regmap, RT1318_DA_VOL_L_8, + rt1318->rt1318_dvol >> 8); + regmap_write(rt1318->regmap, RT1318_DA_VOL_L_1_7, + rt1318->rt1318_dvol & 0xff); + regmap_write(rt1318->regmap, RT1318_DA_VOL_R_8, + rt1318->rt1318_dvol >> 8); + regmap_write(rt1318->regmap, RT1318_DA_VOL_R_1_7, + rt1318->rt1318_dvol & 0xff); + return 1; + } + + return 0; +} + +static int rt1318_dvol_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + + ucontrol->value.integer.value[0] = rt1318->rt1318_dvol; + + return 0; +} + +static const struct snd_kcontrol_new rt1318_snd_controls[] = { + SOC_SINGLE_EXT("Amp Playback Volume", SND_SOC_NOPM, 0, 383, 0, + rt1318_dvol_get, rt1318_dvol_put), +}; + +static const struct snd_soc_dapm_widget rt1318_dapm_widgets[] = { + /* Audio Interface */ + SND_SOC_DAPM_AIF_IN("AIF1RX", "AIF1 Playback", 0, SND_SOC_NOPM, 0, 0), + /* DACs */ + SND_SOC_DAPM_DAC_E("DAC", NULL, SND_SOC_NOPM, 0, 0, + rt1318_dac_event, SND_SOC_DAPM_PRE_PMU | + SND_SOC_DAPM_POST_PMD), + /* Output Lines */ + SND_SOC_DAPM_OUTPUT("Amp"), +}; + +static const struct snd_soc_dapm_route rt1318_dapm_routes[] = { + {"DAC", NULL, "AIF1RX"}, + {"Amp", NULL, "DAC"}, +}; + +static int rt1318_get_clk_info(int sclk, int rate) +{ + int i, pd[] = {1, 2, 4, 8, 16, 24}; + + if (sclk <= 0 || rate <= 0) + return -EINVAL; + + rate = rate << 8; + for (i = 0; i < ARRAY_SIZE(pd); i++) + if (sclk == rate * pd[i]) + return i; + + return -EINVAL; +} + +static int rt1318_clk_ip_info(struct snd_soc_component *component, int lrclk) +{ + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + + switch (lrclk) { + case RT1318_LRCLK_48000: + case RT1318_LRCLK_44100: + case RT1318_LRCLK_16000: + regmap_update_bits(rt1318->regmap, RT1318_SRC_TCON, + RT1318_SRCIN_F12288_MASK | RT1318_SRCIN_DACLK_MASK, + RT1318_SRCIN_TCON4 | RT1318_DACLK_TCON4); + break; + case RT1318_LRCLK_96000: + regmap_update_bits(rt1318->regmap, RT1318_SRC_TCON, + RT1318_SRCIN_F12288_MASK | RT1318_SRCIN_DACLK_MASK, + RT1318_SRCIN_TCON4 | RT1318_DACLK_TCON2); + break; + case RT1318_LRCLK_192000: + regmap_update_bits(rt1318->regmap, RT1318_SRC_TCON, + RT1318_SRCIN_F12288_MASK | RT1318_SRCIN_DACLK_MASK, + RT1318_SRCIN_TCON4 | RT1318_DACLK_TCON1); + break; + default: + dev_err(component->dev, "Unsupported clock rate.\n"); + return -EINVAL; + } + + return 0; +} + +static int rt1318_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + int data_len = 0, ch_len = 0; + int pre_div, ret; + + rt1318->lrck = params_rate(params); + pre_div = rt1318_get_clk_info(rt1318->sysclk, rt1318->lrck); + if (pre_div < 0) { + dev_err(component->dev, "Unsupported clock setting\n"); + return -EINVAL; + } + ret = rt1318_clk_ip_info(component, rt1318->lrck); + if (ret < 0) { + dev_err(component->dev, "Unsupported clock setting\n"); + return -EINVAL; + } + + switch (params_width(params)) { + case 16: + break; + case 20: + data_len = RT1318_I2S_DL_20; + ch_len = RT1318_I2S_DL_20; + break; + case 24: + data_len = RT1318_I2S_DL_24; + ch_len = RT1318_I2S_DL_24; + break; + case 32: + data_len = RT1318_I2S_DL_32; + ch_len = RT1318_I2S_DL_32; + break; + case 8: + data_len = RT1318_I2S_DL_8; + ch_len = RT1318_I2S_DL_8; + break; + default: + return -EINVAL; + } + + regmap_update_bits(rt1318->regmap, RT1318_CLK2, + RT1318_DIV_AP_MASK | RT1318_DIV_DAMOD_MASK, + pre_div << RT1318_DIV_AP_SFT | + pre_div << RT1318_DIV_DAMOD_SFT); + regmap_update_bits(rt1318->regmap, RT1318_CLK3, + RT1318_AD_STO1_MASK | RT1318_AD_STO2_MASK, + pre_div << RT1318_AD_STO1_SFT | + pre_div << RT1318_AD_STO2_SFT); + regmap_update_bits(rt1318->regmap, RT1318_CLK4, + RT1318_AD_ANA_STO1_MASK | RT1318_AD_ANA_STO2_MASK, + pre_div << RT1318_AD_ANA_STO1_SFT | + pre_div << RT1318_AD_ANA_STO2_SFT); + regmap_update_bits(rt1318->regmap, RT1318_CLK5, + RT1318_DIV_FIFO_IN_MASK | RT1318_DIV_FIFO_OUT_MASK, + pre_div << RT1318_DIV_FIFO_IN_SFT | + pre_div << RT1318_DIV_FIFO_OUT_SFT); + regmap_update_bits(rt1318->regmap, RT1318_CLK6, + RT1318_DIV_NLMS_MASK | RT1318_DIV_AD_MONO_MASK | + RT1318_DIV_POST_G_MASK, pre_div << RT1318_DIV_NLMS_SFT | + pre_div << RT1318_DIV_AD_MONO_SFT | + pre_div << RT1318_DIV_POST_G_SFT); + + regmap_update_bits(rt1318->regmap, RT1318_TDM_CTRL2, + RT1318_I2S_DL_MASK, data_len << RT1318_I2S_DL_SFT); + regmap_update_bits(rt1318->regmap, RT1318_TDM_CTRL3, + RT1318_I2S_TX_CHL_MASK | RT1318_I2S_RX_CHL_MASK, + ch_len << RT1318_I2S_TX_CHL_SFT | + ch_len << RT1318_I2S_RX_CHL_SFT); + + return 0; +} + +static int rt1318_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt) +{ + struct snd_soc_component *component = dai->component; + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + unsigned int reg_val = 0, reg_val2 = 0; + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_NF: + reg_val2 |= RT1318_TDM_BCLK_INV; + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + break; + + case SND_SOC_DAIFMT_LEFT_J: + reg_val |= RT1318_FMT_LEFT_J; + break; + + case SND_SOC_DAIFMT_DSP_A: + reg_val |= RT1318_FMT_PCM_A_R; + break; + + case SND_SOC_DAIFMT_DSP_B: + reg_val |= RT1318_FMT_PCM_B_R; + break; + + default: + return -EINVAL; + } + + regmap_update_bits(rt1318->regmap, RT1318_TDM_CTRL1, + RT1318_I2S_FMT_MASK, reg_val); + regmap_update_bits(rt1318->regmap, RT1318_TDM_CTRL1, + RT1318_TDM_BCLK_MASK, reg_val2); + + return 0; +} + +static int rt1318_set_dai_sysclk(struct snd_soc_dai *dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_component *component = dai->component; + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + int reg_val = 0; + + if (freq == rt1318->sysclk && clk_id == rt1318->sysclk_src) + return 0; + + switch (clk_id) { + case RT1318_SCLK_S_BCLK: + reg_val |= RT1318_SYSCLK_BCLK; + break; + case RT1318_SCLK_S_SDW: + reg_val |= RT1318_SYSCLK_SDW; + break; + case RT1318_SCLK_S_PLL2F: + reg_val |= RT1318_SYSCLK_PLL2F; + break; + case RT1318_SCLK_S_PLL2B: + reg_val |= RT1318_SYSCLK_PLL2B; + break; + case RT1318_SCLK_S_MCLK: + reg_val |= RT1318_SYSCLK_MCLK; + break; + case RT1318_SCLK_S_RC0: + reg_val |= RT1318_SYSCLK_RC1; + break; + case RT1318_SCLK_S_RC1: + reg_val |= RT1318_SYSCLK_RC2; + break; + case RT1318_SCLK_S_RC2: + reg_val |= RT1318_SYSCLK_RC3; + break; + default: + dev_err(component->dev, "Invalid clock id (%d)\n", clk_id); + return -EINVAL; + } + + rt1318->sysclk = freq; + rt1318->sysclk_src = clk_id; + dev_dbg(dai->dev, "Sysclk is %dHz and clock id is %d\n", freq, clk_id); + regmap_update_bits(rt1318->regmap, RT1318_CLK1, + RT1318_SYSCLK_SEL_MASK, reg_val); + + return 0; +} + +static const struct pll_calc_map pll_preset_table[] = { + {512000, 4096000, 22, 190, 0, true, false}, + {1024000, 4096000, 22, 94, 0, true, false}, + {1024000, 16384000, 4, 190, 0, true, false}, + {1411200, 11289600, 6, 62, 0, true, false}, + {1536000, 12288000, 6, 62, 0, true, false}, + {2822400, 11289600, 6, 62, 0, true, false}, + {2822400, 45158400, 0, 62, 0, true, false}, + {2822400, 49152000, 0, 62, 0, true, false}, + {3072000, 12288000, 6, 62, 0, true, false}, + {3072000, 24576000, 2, 62, 0, true, false}, + {3072000, 49152000, 0, 62, 0, true, false}, + {6144000, 24576000, 2, 94, 4, false, false}, + {6144000, 49152000, 0, 30, 0, true, false}, + {6144000, 98304000, 0, 94, 4, false, true}, + {12288000, 49152000, 0, 62, 6, false, false}, +}; + +static int rt1318_pll_calc(const unsigned int freq_in, + const unsigned int freq_out, struct rt1318_pll_code *pll_code) +{ + int max_n = RT1318_PLL_N_MAX, max_m = RT1318_PLL_M_MAX; + int i, k, red, n_t, pll_out, in_t, out_t; + int n = 0, m = 0, m_t = 0; + int red_t = abs(freq_out - freq_in); + bool m_bypass = false, k_bypass = false; + + if (RT1318_PLL_INP_MAX < freq_in || RT1318_PLL_INP_MIN > freq_in) + return -EINVAL; + + for (i = 0; i < ARRAY_SIZE(pll_preset_table); i++) { + if (freq_in == pll_preset_table[i].pll_in && + freq_out == pll_preset_table[i].pll_out) { + k = pll_preset_table[i].k; + m = pll_preset_table[i].m; + n = pll_preset_table[i].n; + m_bypass = pll_preset_table[i].m_bp; + k_bypass = pll_preset_table[i].k_bp; + goto code_find; + } + } + + k = 100000000 / freq_out - 2; + if (k > RT1318_PLL_K_MAX) + k = RT1318_PLL_K_MAX; + if (k < 0) { + k = 0; + k_bypass = true; + } + for (n_t = 0; n_t <= max_n; n_t++) { + in_t = freq_in / (k_bypass ? 1 : (k + 2)); + pll_out = freq_out / (n_t + 2); + if (in_t < 0) + continue; + if (in_t == pll_out) { + m_bypass = true; + n = n_t; + goto code_find; + } + red = abs(in_t - pll_out); + if (red < red_t) { + m_bypass = true; + n = n_t; + m = m_t; + if (red == 0) + goto code_find; + red_t = red; + } + for (m_t = 0; m_t <= max_m; m_t++) { + out_t = in_t / (m_t + 2); + red = abs(out_t - pll_out); + if (red < red_t) { + m_bypass = false; + n = n_t; + m = m_t; + if (red == 0) + goto code_find; + red_t = red; + } + } + } + pr_debug("Only get approximation about PLL\n"); + +code_find: + + pll_code->m_bp = m_bypass; + pll_code->k_bp = k_bypass; + pll_code->m_code = m; + pll_code->n_code = n; + pll_code->k_code = k; + return 0; +} + +static int rt1318_set_dai_pll(struct snd_soc_dai *dai, int pll_id, int source, + unsigned int freq_in, unsigned int freq_out) +{ + struct snd_soc_component *component = dai->component; + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + struct rt1318_pll_code pll_code; + int ret; + + if (!freq_in || !freq_out) { + dev_dbg(component->dev, "PLL disabled\n"); + rt1318->pll_in = 0; + rt1318->pll_out = 0; + return 0; + } + + if (source == rt1318->pll_src && freq_in == rt1318->pll_in && + freq_out == rt1318->pll_out) + return 0; + + switch (source) { + case RT1318_PLL_S_BCLK0: + regmap_update_bits(rt1318->regmap, RT1318_CLK1, + RT1318_PLLIN_MASK, RT1318_PLLIN_BCLK0); + break; + case RT1318_PLL_S_BCLK1: + regmap_update_bits(rt1318->regmap, RT1318_CLK1, + RT1318_PLLIN_MASK, RT1318_PLLIN_BCLK1); + break; + case RT1318_PLL_S_RC: + regmap_update_bits(rt1318->regmap, RT1318_CLK1, + RT1318_PLLIN_MASK, RT1318_PLLIN_RC); + break; + case RT1318_PLL_S_MCLK: + regmap_update_bits(rt1318->regmap, RT1318_CLK1, + RT1318_PLLIN_MASK, RT1318_PLLIN_MCLK); + break; + case RT1318_PLL_S_SDW_IN_PLL: + regmap_update_bits(rt1318->regmap, RT1318_CLK1, + RT1318_PLLIN_MASK, RT1318_PLLIN_SDW1); + break; + case RT1318_PLL_S_SDW_0: + regmap_update_bits(rt1318->regmap, RT1318_CLK1, + RT1318_PLLIN_MASK, RT1318_PLLIN_SDW2); + break; + case RT1318_PLL_S_SDW_1: + regmap_update_bits(rt1318->regmap, RT1318_CLK1, + RT1318_PLLIN_MASK, RT1318_PLLIN_SDW3); + break; + case RT1318_PLL_S_SDW_2: + regmap_update_bits(rt1318->regmap, RT1318_CLK1, + RT1318_PLLIN_MASK, RT1318_PLLIN_SDW4); + break; + default: + dev_err(component->dev, "Unknown PLL source %d\n", source); + return -EINVAL; + } + + ret = rt1318_pll_calc(freq_in, freq_out, &pll_code); + if (ret < 0) { + dev_err(component->dev, "Unsupport input clock %d\n", freq_in); + return ret; + } + + dev_dbg(component->dev, "bypass=%d m=%d n=%d k=%d\n", + pll_code.m_bp, (pll_code.m_bp ? 0 : pll_code.m_code), + pll_code.n_code, pll_code.k_code); + + regmap_update_bits(rt1318->regmap, RT1318_PLL1_K, + RT1318_K_PLL1_MASK, pll_code.k_code); + regmap_update_bits(rt1318->regmap, RT1318_PLL1_M, + RT1318_M_PLL1_MASK, (pll_code.m_bp ? 0 : pll_code.m_code)); + regmap_update_bits(rt1318->regmap, RT1318_PLL1_N_8, + RT1318_N_8_PLL1_MASK, pll_code.n_code >> 8); + regmap_update_bits(rt1318->regmap, RT1318_PLL1_N_7_0, + RT1318_N_7_0_PLL1_MASK, pll_code.n_code); + + rt1318->pll_in = freq_in; + rt1318->pll_out = freq_out; + rt1318->pll_src = source; + + return 0; +} + +static int rt1318_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask, + unsigned int rx_mask, int slots, int slot_width) +{ + struct snd_soc_component *component = dai->component; + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + unsigned int cn = 0, cl = 0, rx_slotnum; + int ret = 0, first_bit; + + switch (slots) { + case 4: + cn |= RT1318_I2S_CH_TX_4CH; + cn |= RT1318_I2S_CH_RX_4CH; + break; + case 6: + cn |= RT1318_I2S_CH_TX_6CH; + cn |= RT1318_I2S_CH_RX_6CH; + break; + case 8: + cn |= RT1318_I2S_CH_TX_8CH; + cn |= RT1318_I2S_CH_RX_8CH; + break; + case 2: + break; + default: + return -EINVAL; + } + + switch (slot_width) { + case 20: + cl |= RT1318_I2S_TX_CHL_20; + cl |= RT1318_I2S_RX_CHL_20; + break; + case 24: + cl |= RT1318_I2S_TX_CHL_24; + cl |= RT1318_I2S_RX_CHL_24; + break; + case 32: + cl |= RT1318_I2S_TX_CHL_32; + cl |= RT1318_I2S_RX_CHL_32; + break; + case 8: + cl |= RT1318_I2S_TX_CHL_8; + cl |= RT1318_I2S_RX_CHL_8; + break; + case 16: + break; + default: + return -EINVAL; + } + + /* Rx slot configuration */ + rx_slotnum = hweight_long(rx_mask); + if (rx_slotnum != 1) { + ret = -EINVAL; + dev_err(component->dev, "too many rx slots or zero slot\n"); + goto _set_tdm_err_; + } + + first_bit = __ffs(rx_mask); + switch (first_bit) { + case 0: + case 2: + case 4: + case 6: + regmap_update_bits(rt1318->regmap, + RT1318_TDM_CTRL9, + RT1318_TDM_I2S_TX_L_DAC1_1_MASK | + RT1318_TDM_I2S_TX_R_DAC1_1_MASK, + (first_bit << RT1318_TDM_I2S_TX_L_DAC1_1_SFT) | + ((first_bit + 1) << RT1318_TDM_I2S_TX_R_DAC1_1_SFT)); + break; + case 1: + case 3: + case 5: + case 7: + regmap_update_bits(rt1318->regmap, + RT1318_TDM_CTRL9, + RT1318_TDM_I2S_TX_L_DAC1_1_MASK | + RT1318_TDM_I2S_TX_R_DAC1_1_MASK, + ((first_bit - 1) << RT1318_TDM_I2S_TX_L_DAC1_1_SFT) | + (first_bit << RT1318_TDM_I2S_TX_R_DAC1_1_SFT)); + break; + default: + ret = -EINVAL; + goto _set_tdm_err_; + } + + regmap_update_bits(rt1318->regmap, RT1318_TDM_CTRL2, + RT1318_I2S_CH_TX_MASK | RT1318_I2S_CH_RX_MASK, cn); + regmap_update_bits(rt1318->regmap, RT1318_TDM_CTRL3, + RT1318_I2S_TX_CHL_MASK | RT1318_I2S_RX_CHL_MASK, cl); + +_set_tdm_err_: + return ret; +} + +static int rt1318_probe(struct snd_soc_component *component) +{ + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + + rt1318->component = component; + + schedule_work(&rt1318->cali_work); + rt1318->rt1318_dvol = RT1318_DVOL_STEP; + + return 0; +} + +static void rt1318_remove(struct snd_soc_component *component) +{ + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + + cancel_work_sync(&rt1318->cali_work); +} + +#ifdef CONFIG_PM +static int rt1318_suspend(struct snd_soc_component *component) +{ + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + + regcache_cache_only(rt1318->regmap, true); + regcache_mark_dirty(rt1318->regmap); + return 0; +} + +static int rt1318_resume(struct snd_soc_component *component) +{ + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + + regcache_cache_only(rt1318->regmap, false); + regcache_sync(rt1318->regmap); + return 0; +} +#else +#define rt1318_suspend NULL +#define rt1318_resume NULL +#endif + +#define RT1318_STEREO_RATES SNDRV_PCM_RATE_8000_192000 +#define RT1318_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S8) + +static const struct snd_soc_dai_ops rt1318_aif_dai_ops = { + .hw_params = rt1318_hw_params, + .set_fmt = rt1318_set_dai_fmt, + .set_sysclk = rt1318_set_dai_sysclk, + .set_pll = rt1318_set_dai_pll, + .set_tdm_slot = rt1318_set_tdm_slot, +}; + +static struct snd_soc_dai_driver rt1318_dai[] = { + { + .name = "rt1318-aif", + .id = 0, + .playback = { + .stream_name = "AIF1 Playback", + .channels_min = 1, + .channels_max = 2, + .rates = RT1318_STEREO_RATES, + .formats = RT1318_FORMATS, + }, + .ops = &rt1318_aif_dai_ops, + } +}; + +static const struct snd_soc_component_driver soc_component_dev_rt1318 = { + .probe = rt1318_probe, + .remove = rt1318_remove, + .suspend = rt1318_suspend, + .resume = rt1318_resume, + .controls = rt1318_snd_controls, + .num_controls = ARRAY_SIZE(rt1318_snd_controls), + .dapm_widgets = rt1318_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(rt1318_dapm_widgets), + .dapm_routes = rt1318_dapm_routes, + .num_dapm_routes = ARRAY_SIZE(rt1318_dapm_routes), + .use_pmdown_time = 1, + .endianness = 1, +}; + +static const struct regmap_config rt1318_regmap = { + .reg_bits = 32, + .val_bits = 8, + .readable_reg = rt1318_readable_register, + .volatile_reg = rt1318_volatile_register, + .max_register = 0x41001888, + .reg_defaults = rt1318_reg, + .num_reg_defaults = ARRAY_SIZE(rt1318_reg), + .cache_type = REGCACHE_RBTREE, + .use_single_read = true, + .use_single_write = true, +}; + +static const struct i2c_device_id rt1318_i2c_id[] = { + { "rt1318", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, rt1318_i2c_id); + +static const struct of_device_id rt1318_of_match[] = { + { .compatible = "realtek,rt1318", }, + {}, +}; +MODULE_DEVICE_TABLE(of, rt1318_of_match); + +#ifdef CONFIG_ACPI +static const struct acpi_device_id rt1318_acpi_match[] = { + { "10EC1318", 0}, + { }, +}; +MODULE_DEVICE_TABLE(acpi, rt1318_acpi_match); +#endif + +static int rt1318_parse_dt(struct rt1318_priv *rt1318, struct device *dev) +{ + device_property_read_u32(dev, "realtek,r0_l", + &rt1318->pdata.init_r0_l); + device_property_read_u32(dev, "realtek,r0_r", + &rt1318->pdata.init_r0_r); + + return 0; +} + +static void rt1318_calibration_sequence(struct rt1318_priv *rt1318) +{ + regmap_write(rt1318->regmap, RT1318_CLK1, 0x22); + regmap_write(rt1318->regmap, RT1318_PLL1_N_7_0, 0x06); + regmap_write(rt1318->regmap, RT1318_STP_TEMP_L, 0xCC); + regmap_write(rt1318->regmap, RT1318_STP_SEL_L, 0x40); + regmap_write(rt1318->regmap, RT1318_STP_SEL_R, 0x40); + regmap_write(rt1318->regmap, RT1318_SINE_GEN0, 0x20); + regmap_write(rt1318->regmap, RT1318_SPK_VOL_TH, 0x00); + regmap_write(rt1318->regmap, RT1318_FEEDBACK_PATH, 0x0B); + regmap_write(rt1318->regmap, RT1318_TCON, 0x1C); + regmap_write(rt1318->regmap, RT1318_TCON_RELATE, 0x58); + regmap_write(rt1318->regmap, RT1318_TCON_RELATE, 0x78); + regmap_write(rt1318->regmap, RT1318_STP_R0_EN_L, 0xC2); +} + +static void rt1318_r0_calculate(struct rt1318_priv *rt1318) +{ + unsigned int r0_l, r0_l_byte0, r0_l_byte1, r0_l_byte2, r0_l_byte3; + unsigned int r0_r, r0_r_byte0, r0_r_byte1, r0_r_byte2, r0_r_byte3; + unsigned int r0_l_integer, r0_l_factor, r0_r_integer, r0_r_factor; + unsigned int format = 16777216; /* 2^24 */ + + regmap_read(rt1318->regmap, RT1318_R0_L_24, &r0_l_byte0); + regmap_read(rt1318->regmap, RT1318_R0_L_23_16, &r0_l_byte1); + regmap_read(rt1318->regmap, RT1318_R0_L_15_8, &r0_l_byte2); + regmap_read(rt1318->regmap, RT1318_R0_L_7_0, &r0_l_byte3); + r0_l = r0_l_byte0 << 24 | r0_l_byte1 << 16 | r0_l_byte2 << 8 | r0_l_byte3; + r0_l_integer = format / r0_l; + r0_l_factor = (format * 10) / r0_l - r0_l_integer * 10; + + regmap_read(rt1318->regmap, RT1318_R0_R_24, &r0_r_byte0); + regmap_read(rt1318->regmap, RT1318_R0_R_23_16, &r0_r_byte1); + regmap_read(rt1318->regmap, RT1318_R0_R_15_8, &r0_r_byte2); + regmap_read(rt1318->regmap, RT1318_R0_R_7_0, &r0_r_byte3); + r0_r = r0_r_byte0 << 24 | r0_r_byte1 << 16 | r0_r_byte2 << 8 | r0_r_byte3; + r0_r_integer = format / r0_r; + r0_r_factor = (format * 10) / r0_r - r0_r_integer * 10; + + dev_dbg(rt1318->component->dev, "r0_l_ch:%d.%d ohm\n", r0_l_integer, r0_l_factor); + dev_dbg(rt1318->component->dev, "r0_r_ch:%d.%d ohm\n", r0_r_integer, r0_r_factor); +} + +static void rt1318_r0_restore(struct rt1318_priv *rt1318) +{ + regmap_write(rt1318->regmap, RT1318_PRE_R0_L_24, + (rt1318->pdata.init_r0_l >> 24) & 0xff); + regmap_write(rt1318->regmap, RT1318_PRE_R0_L_23_16, + (rt1318->pdata.init_r0_l >> 16) & 0xff); + regmap_write(rt1318->regmap, RT1318_PRE_R0_L_15_8, + (rt1318->pdata.init_r0_l >> 8) & 0xff); + regmap_write(rt1318->regmap, RT1318_PRE_R0_L_7_0, + (rt1318->pdata.init_r0_l >> 0) & 0xff); + regmap_write(rt1318->regmap, RT1318_PRE_R0_R_24, + (rt1318->pdata.init_r0_r >> 24) & 0xff); + regmap_write(rt1318->regmap, RT1318_PRE_R0_R_23_16, + (rt1318->pdata.init_r0_r >> 16) & 0xff); + regmap_write(rt1318->regmap, RT1318_PRE_R0_R_15_8, + (rt1318->pdata.init_r0_r >> 8) & 0xff); + regmap_write(rt1318->regmap, RT1318_PRE_R0_R_7_0, + (rt1318->pdata.init_r0_r >> 0) & 0xff); + regmap_write(rt1318->regmap, RT1318_STP_SEL_L, 0x80); + regmap_write(rt1318->regmap, RT1318_STP_SEL_R, 0x80); + regmap_write(rt1318->regmap, RT1318_R0_CMP_L_FLAG, 0xc0); + regmap_write(rt1318->regmap, RT1318_R0_CMP_R_FLAG, 0xc0); + regmap_write(rt1318->regmap, RT1318_STP_R0_EN_L, 0xc0); + regmap_write(rt1318->regmap, RT1318_STP_R0_EN_R, 0xc0); + regmap_write(rt1318->regmap, RT1318_STP_TEMP_L, 0xcc); + regmap_write(rt1318->regmap, RT1318_TCON, 0x9c); +} + +static int rt1318_calibrate(struct rt1318_priv *rt1318) +{ + int chk_cnt = 30, count = 0; + int val, val2; + + regmap_write(rt1318->regmap, RT1318_PWR_STA1, 0x1); + usleep_range(0, 10000); + rt1318_calibration_sequence(rt1318); + + while (count < chk_cnt) { + msleep(100); + regmap_read(rt1318->regmap, RT1318_R0_CMP_L_FLAG, &val); + regmap_read(rt1318->regmap, RT1318_R0_CMP_R_FLAG, &val2); + val = (val >> 1) & 0x1; + val2 = (val2 >> 1) & 0x1; + if (val & val2) { + dev_dbg(rt1318->component->dev, "Calibration done.\n"); + break; + } + count++; + if (count == chk_cnt) { + regmap_write(rt1318->regmap, RT1318_PWR_STA1, 0x0); + return RT1318_R0_CALIB_NOT_DONE; + } + } + regmap_write(rt1318->regmap, RT1318_PWR_STA1, 0x0); + regmap_read(rt1318->regmap, RT1318_R0_CMP_L_FLAG, &val); + regmap_read(rt1318->regmap, RT1318_R0_CMP_R_FLAG, &val2); + if ((val & 0x1) & (val2 & 0x1)) + return RT1318_R0_IN_RANGE; + else + return RT1318_R0_OUT_OF_RANGE; +} + +static void rt1318_calibration_work(struct work_struct *work) +{ + struct rt1318_priv *rt1318 = + container_of(work, struct rt1318_priv, cali_work); + int ret; + + if (rt1318->pdata.init_r0_l && rt1318->pdata.init_r0_r) + rt1318_r0_restore(rt1318); + else { + ret = rt1318_calibrate(rt1318); + if (ret == RT1318_R0_IN_RANGE) + rt1318_r0_calculate(rt1318); + dev_dbg(rt1318->component->dev, "Calibrate R0 result:%d\n", ret); + } +} + +static int rt1318_i2c_probe(struct i2c_client *i2c) +{ + struct rt1318_platform_data *pdata = dev_get_platdata(&i2c->dev); + struct rt1318_priv *rt1318; + int ret, val, val2, dev_id; + + rt1318 = devm_kzalloc(&i2c->dev, sizeof(struct rt1318_priv), + GFP_KERNEL); + if (!rt1318) + return -ENOMEM; + + i2c_set_clientdata(i2c, rt1318); + + if (pdata) + rt1318->pdata = *pdata; + else + rt1318_parse_dt(rt1318, &i2c->dev); + + rt1318->regmap = devm_regmap_init_i2c(i2c, &rt1318_regmap); + if (IS_ERR(rt1318->regmap)) { + ret = PTR_ERR(rt1318->regmap); + dev_err(&i2c->dev, "Failed to allocate register map: %d\n", + ret); + return ret; + } + + regmap_read(rt1318->regmap, RT1318_DEV_ID1, &val); + regmap_read(rt1318->regmap, RT1318_DEV_ID2, &val2); + dev_id = (val << 8) | val2; + if (dev_id != 0x6821) { + dev_err(&i2c->dev, + "Device with ID register %#x is not rt1318\n", + dev_id); + return -ENODEV; + } + + ret = regmap_register_patch(rt1318->regmap, init_list, + ARRAY_SIZE(init_list)); + if (ret != 0) + dev_warn(&i2c->dev, "Failed to apply regmap patch: %d\n", ret); + + INIT_WORK(&rt1318->cali_work, rt1318_calibration_work); + + return devm_snd_soc_register_component(&i2c->dev, + &soc_component_dev_rt1318, rt1318_dai, ARRAY_SIZE(rt1318_dai)); +} + +static struct i2c_driver rt1318_i2c_driver = { + .driver = { + .name = "rt1318", + .of_match_table = of_match_ptr(rt1318_of_match), + .acpi_match_table = ACPI_PTR(rt1318_acpi_match), + }, + .probe = rt1318_i2c_probe, + .id_table = rt1318_i2c_id, +}; +module_i2c_driver(rt1318_i2c_driver); + +MODULE_DESCRIPTION("ASoC RT1318 driver"); +MODULE_AUTHOR("Jack Yu <jack.yu(a)realtek.com>"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/rt1318.h b/sound/soc/codecs/rt1318.h new file mode 100644 index 000000000000..cec40b484216 --- /dev/null +++ b/sound/soc/codecs/rt1318.h @@ -0,0 +1,342 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * rt1318.h -- Platform data for RT1318 + * + * Copyright 2024 Realtek Semiconductor Corp. + */ +#include <sound/rt1318.h> + +#ifndef __RT1318_H__ +#define __RT1318_H__ + +struct rt1318_priv { + struct snd_soc_component *component; + struct rt1318_platform_data pdata; + struct work_struct cali_work; + struct regmap *regmap; + + unsigned int r0_l_integer; + unsigned int r0_l_factor; + unsigned int r0_r_integer; + unsigned int r0_r_factor; + int rt1318_init; + int rt1318_dvol; + int sysclk_src; + int sysclk; + int lrck; + int bclk; + int master; + int pll_src; + int pll_in; + int pll_out; +}; + +#define RT1318_PLL_INP_MAX 40000000 +#define RT1318_PLL_INP_MIN 256000 +#define RT1318_PLL_N_MAX 0x1ff +#define RT1318_PLL_K_MAX 0x1f +#define RT1318_PLL_M_MAX 0x1f + +#define RT1318_LRCLK_192000 192000 +#define RT1318_LRCLK_96000 96000 +#define RT1318_LRCLK_48000 48000 +#define RT1318_LRCLK_44100 44100 +#define RT1318_LRCLK_16000 16000 +#define RT1318_DVOL_STEP 383 + +#define RT1318_CLK1 0xc001 +#define RT1318_CLK2 0xc003 +#define RT1318_CLK3 0xc004 +#define RT1318_CLK4 0xc005 +#define RT1318_CLK5 0xc006 +#define RT1318_CLK6 0xc007 +#define RT1318_CLK7 0xc008 +#define RT1318_PWR_STA1 0xc121 +#define RT1318_SPK_VOL_TH 0xc130 +#define RT1318_TCON 0xc203 +#define RT1318_SRC_TCON 0xc204 +#define RT1318_TCON_RELATE 0xc206 +#define RT1318_DA_VOL_L_8 0xc20b +#define RT1318_DA_VOL_L_1_7 0xc20c +#define RT1318_DA_VOL_R_8 0xc20d +#define RT1318_DA_VOL_R_1_7 0xc20e +#define RT1318_FEEDBACK_PATH 0xc321 +#define RT1318_STP_TEMP_L 0xdb00 +#define RT1318_STP_SEL_L 0xdb08 +#define RT1318_STP_R0_EN_L 0xdb12 +#define RT1318_R0_CMP_L_FLAG 0xdb35 +#define RT1318_PRE_R0_L_24 0xdbb5 +#define RT1318_PRE_R0_L_23_16 0xdbb6 +#define RT1318_PRE_R0_L_15_8 0xdbb7 +#define RT1318_PRE_R0_L_7_0 0xdbb8 +#define RT1318_R0_L_24 0xdbc5 +#define RT1318_R0_L_23_16 0xdbc6 +#define RT1318_R0_L_15_8 0xdbc7 +#define RT1318_R0_L_7_0 0xdbc8 +#define RT1318_STP_SEL_R 0xdd08 +#define RT1318_STP_R0_EN_R 0xdd12 +#define RT1318_R0_CMP_R_FLAG 0xdd35 +#define RT1318_PRE_R0_R_24 0xddb5 +#define RT1318_PRE_R0_R_23_16 0xddb6 +#define RT1318_PRE_R0_R_15_8 0xddb7 +#define RT1318_PRE_R0_R_7_0 0xddb8 +#define RT1318_R0_R_24 0xddc5 +#define RT1318_R0_R_23_16 0xddc6 +#define RT1318_R0_R_15_8 0xddc7 +#define RT1318_R0_R_7_0 0xddc8 +#define RT1318_DEV_ID1 0xf012 +#define RT1318_DEV_ID2 0xf013 +#define RT1318_PLL1_K 0xf20d +#define RT1318_PLL1_M 0xf20f +#define RT1318_PLL1_N_8 0xf211 +#define RT1318_PLL1_N_7_0 0xf212 +#define RT1318_SINE_GEN0 0xf800 +#define RT1318_TDM_CTRL1 0xf900 +#define RT1318_TDM_CTRL2 0xf901 +#define RT1318_TDM_CTRL3 0xf902 +#define RT1318_TDM_CTRL9 0xf908 + + +/* Clock-1 (0xC001) */ +#define RT1318_PLLIN_MASK (0x7 << 4) +#define RT1318_PLLIN_BCLK0 (0x0 << 4) +#define RT1318_PLLIN_BCLK1 (0x1 << 4) +#define RT1318_PLLIN_RC (0x2 << 4) +#define RT1318_PLLIN_MCLK (0x3 << 4) +#define RT1318_PLLIN_SDW1 (0x4 << 4) +#define RT1318_PLLIN_SDW2 (0x5 << 4) +#define RT1318_PLLIN_SDW3 (0x6 << 4) +#define RT1318_PLLIN_SDW4 (0x7 << 4) +#define RT1318_SYSCLK_SEL_MASK (0x7 << 0) +#define RT1318_SYSCLK_BCLK (0x0 << 0) +#define RT1318_SYSCLK_SDW (0x1 << 0) +#define RT1318_SYSCLK_PLL2F (0x2 << 0) +#define RT1318_SYSCLK_PLL2B (0x3 << 0) +#define RT1318_SYSCLK_MCLK (0x4 << 0) +#define RT1318_SYSCLK_RC1 (0x5 << 0) +#define RT1318_SYSCLK_RC2 (0x6 << 0) +#define RT1318_SYSCLK_RC3 (0x7 << 0) +/* Clock-2 (0xC003) */ +#define RT1318_DIV_AP_MASK (0x3 << 4) +#define RT1318_DIV_AP_SFT 4 +#define RT1318_DIV_AP_DIV1 (0x0 << 4) +#define RT1318_DIV_AP_DIV2 (0x1 << 4) +#define RT1318_DIV_AP_DIV4 (0x2 << 4) +#define RT1318_DIV_AP_DIV8 (0x3 << 4) +#define RT1318_DIV_DAMOD_MASK (0x3 << 0) +#define RT1318_DIV_DAMOD_SFT 0 +#define RT1318_DIV_DAMOD_DIV1 (0x0 << 0) +#define RT1318_DIV_DAMOD_DIV2 (0x1 << 0) +#define RT1318_DIV_DAMOD_DIV4 (0x2 << 0) +#define RT1318_DIV_DAMOD_DIV8 (0x3 << 0) +/* Clock-3 (0xC004) */ +#define RT1318_AD_STO1_MASK (0x7 << 4) +#define RT1318_AD_STO1_SFT 4 +#define RT1318_AD_STO1_DIV1 (0x0 << 4) +#define RT1318_AD_STO1_DIV2 (0x1 << 4) +#define RT1318_AD_STO1_DIV4 (0x2 << 4) +#define RT1318_AD_STO1_DIV8 (0x3 << 4) +#define RT1318_AD_STO1_DIV16 (0x4 << 4) +#define RT1318_AD_STO2_MASK (0x7 << 0) +#define RT1318_AD_STO2_SFT 0 +#define RT1318_AD_STO2_DIV1 (0x0 << 0) +#define RT1318_AD_STO2_DIV2 (0x1 << 0) +#define RT1318_AD_STO2_DIV4 (0x2 << 0) +#define RT1318_AD_STO2_DIV8 (0x3 << 0) +#define RT1318_AD_STO2_DIV16 (0x4 << 0) +#define RT1318_AD_STO2_SFT 0 +/* Clock-4 (0xC005) */ +#define RT1318_AD_ANA_STO1_MASK (0x7 << 4) +#define RT1318_AD_ANA_STO1_SFT 4 +#define RT1318_AD_ANA_STO1_DIV1 (0x0 << 4) +#define RT1318_AD_ANA_STO1_DIV2 (0x1 << 4) +#define RT1318_AD_ANA_STO1_DIV4 (0x2 << 4) +#define RT1318_AD_ANA_STO1_DIV8 (0x3 << 4) +#define RT1318_AD_ANA_STO1_DIV16 (0x4 << 4) +#define RT1318_AD_ANA_STO2_MASK (0x7 << 0) +#define RT1318_AD_ANA_STO2_DIV1 (0x0 << 0) +#define RT1318_AD_ANA_STO2_DIV2 (0x1 << 0) +#define RT1318_AD_ANA_STO2_DIV4 (0x2 << 0) +#define RT1318_AD_ANA_STO2_DIV8 (0x3 << 0) +#define RT1318_AD_ANA_STO2_DIV16 (0x4 << 0) +#define RT1318_AD_ANA_STO2_SFT 0 +/* Clock-5 (0xC006) */ +#define RT1318_DIV_FIFO_IN_MASK (0x3 << 4) +#define RT1318_DIV_FIFO_IN_SFT 4 +#define RT1318_DIV_FIFO_IN_DIV1 (0x0 << 4) +#define RT1318_DIV_FIFO_IN_DIV2 (0x1 << 4) +#define RT1318_DIV_FIFO_IN_DIV4 (0x2 << 4) +#define RT1318_DIV_FIFO_IN_DIV8 (0x3 << 4) +#define RT1318_DIV_FIFO_OUT_MASK (0x3 << 0) +#define RT1318_DIV_FIFO_OUT_DIV1 (0x0 << 0) +#define RT1318_DIV_FIFO_OUT_DIV2 (0x1 << 0) +#define RT1318_DIV_FIFO_OUT_DIV4 (0x2 << 0) +#define RT1318_DIV_FIFO_OUT_DIV8 (0x3 << 0) +#define RT1318_DIV_FIFO_OUT_SFT 0 +/* Clock-6 (0xC007) */ +#define RT1318_DIV_NLMS_MASK (0x3 << 6) +#define RT1318_DIV_NLMS_SFT 6 +#define RT1318_DIV_NLMS_DIV1 (0x0 << 6) +#define RT1318_DIV_NLMS_DIV2 (0x1 << 6) +#define RT1318_DIV_NLMS_DIV4 (0x2 << 6) +#define RT1318_DIV_NLMS_DIV8 (0x3 << 6) +#define RT1318_DIV_AD_MONO_MASK (0x7 << 3) +#define RT1318_DIV_AD_MONO_SFT 3 +#define RT1318_DIV_AD_MONO_DIV1 (0x0 << 3) +#define RT1318_DIV_AD_MONO_DIV2 (0x1 << 3) +#define RT1318_DIV_AD_MONO_DIV4 (0x2 << 3) +#define RT1318_DIV_AD_MONO_DIV8 (0x3 << 3) +#define RT1318_DIV_AD_MONO_DIV16 (0x4 << 3) +#define RT1318_DIV_POST_G_MASK (0x7 << 0) +#define RT1318_DIV_POST_G_SFT 0 +#define RT1318_DIV_POST_G_DIV1 (0x0 << 0) +#define RT1318_DIV_POST_G_DIV2 (0x1 << 0) +#define RT1318_DIV_POST_G_DIV4 (0x2 << 0) +#define RT1318_DIV_POST_G_DIV8 (0x3 << 0) +#define RT1318_DIV_POST_G_DIV16 (0x4 << 0) +/* Power Status 1 (0xC121) */ +#define RT1318_PDB_CTRL_MASK (0x1) +#define RT1318_PDB_CTRL_LOW (0x0) +#define RT1318_PDB_CTRL_HIGH (0x1) +#define RT1318_PDB_CTRL_SFT 0 +/* SRC Tcon(0xc204) */ +#define RT1318_SRCIN_IN_SEL_MASK (0x3 << 6) +#define RT1318_SRCIN_IN_48K (0x0 << 6) +#define RT1318_SRCIN_IN_44P1 (0x1 << 6) +#define RT1318_SRCIN_IN_32K (0x2 << 6) +#define RT1318_SRCIN_IN_16K (0x3 << 6) +#define RT1318_SRCIN_F12288_MASK (0x3 << 4) +#define RT1318_SRCIN_TCON1 (0x0 << 4) +#define RT1318_SRCIN_TCON2 (0x1 << 4) +#define RT1318_SRCIN_TCON4 (0x2 << 4) +#define RT1318_SRCIN_TCON8 (0x3 << 4) +#define RT1318_SRCIN_DACLK_MASK (0x3 << 2) +#define RT1318_DACLK_TCON1 (0x0 << 2) +#define RT1318_DACLK_TCON2 (0x1 << 2) +#define RT1318_DACLK_TCON4 (0x2 << 2) +#define RT1318_DACLK_TCON8 (0x3 << 2) +/* R0 Compare Flag (0xDB35) */ +#define RT1318_R0_RANGE_MASK (0x1) +#define RT1318_R0_OUTOFRANGE (0x0) +#define RT1318_R0_INRANGE (0x1) +/* PLL internal setting (0xF20D), K value */ +#define RT1318_K_PLL1_MASK (0x1f << 0) +/* PLL internal setting (0xF20F), M value */ +#define RT1318_M_PLL1_MASK (0x1f << 0) +/* PLL internal setting (0xF211), N_8 value */ +#define RT1318_N_8_PLL1_MASK (0x1 << 0) +/* PLL internal setting (0xF212), N_7_0 value */ +#define RT1318_N_7_0_PLL1_MASK (0xff << 0) +/* TDM CTRL 1 (0xf900) */ +#define RT1318_TDM_BCLK_MASK (0x1 << 7) +#define RT1318_TDM_BCLK_NORM (0x0 << 7) +#define RT1318_TDM_BCLK_INV (0x1 << 7) +#define RT1318_I2S_FMT_MASK (0x7 << 0) +#define RT1318_FMT_I2S (0x0 << 0) +#define RT1318_FMT_LEFT_J (0x1 << 0) +#define RT1318_FMT_PCM_A_R (0x2 << 0) +#define RT1318_FMT_PCM_B_R (0x3 << 0) +#define RT1318_FMT_PCM_A_F (0x6 << 0) +#define RT1318_FMT_PCM_B_F (0x7 << 0) +#define RT1318_I2S_FMT_SFT 0 +/* TDM CTRL 2 (0xf901) */ +#define RT1318_I2S_CH_TX_MASK (0x3 << 6) +#define RT1318_I2S_CH_TX_2CH (0x0 << 6) +#define RT1318_I2S_CH_TX_4CH (0x1 << 6) +#define RT1318_I2S_CH_TX_6CH (0x2 << 6) +#define RT1318_I2S_CH_TX_8CH (0x3 << 6) +#define RT1318_I2S_CH_RX_MASK (0x3 << 4) +#define RT1318_I2S_CH_RX_2CH (0x0 << 4) +#define RT1318_I2S_CH_RX_4CH (0x1 << 4) +#define RT1318_I2S_CH_RX_6CH (0x2 << 4) +#define RT1318_I2S_CH_RX_8CH (0x3 << 4) +#define RT1318_I2S_DL_MASK 0x7 +#define RT1318_I2S_DL_SFT 0 +#define RT1318_I2S_DL_16 0x0 +#define RT1318_I2S_DL_20 0x1 +#define RT1318_I2S_DL_24 0x2 +#define RT1318_I2S_DL_32 0x3 +#define RT1318_I2S_DL_8 0x4 +/* TDM CTRL 3 (0xf902) */ +#define RT1318_I2S_TX_CHL_MASK (0x7 << 4) +#define RT1318_I2S_TX_CHL_SFT 4 +#define RT1318_I2S_TX_CHL_16 (0x0 << 4) +#define RT1318_I2S_TX_CHL_20 (0x1 << 4) +#define RT1318_I2S_TX_CHL_24 (0x2 << 4) +#define RT1318_I2S_TX_CHL_32 (0x3 << 4) +#define RT1318_I2S_TX_CHL_8 (0x4 << 4) +#define RT1318_I2S_RX_CHL_MASK (0x7 << 0) +#define RT1318_I2S_RX_CHL_SFT 0 +#define RT1318_I2S_RX_CHL_16 (0x0 << 0) +#define RT1318_I2S_RX_CHL_20 (0x1 << 0) +#define RT1318_I2S_RX_CHL_24 (0x2 << 0) +#define RT1318_I2S_RX_CHL_32 (0x3 << 0) +#define RT1318_I2S_RX_CHL_8 (0x4 << 0) +/* TDM CTRL 9 (0xf908) */ +#define RT1318_TDM_I2S_TX_L_DAC1_1_MASK (0x7 << 4) +#define RT1318_TDM_I2S_TX_R_DAC1_1_MASK 0x7 +#define RT1318_TDM_I2S_TX_L_DAC1_1_SFT 4 +#define RT1318_TDM_I2S_TX_R_DAC1_1_SFT 0 + +#define RT1318_REG_DISP_LEN 23 + +/* System Clock Source */ +enum { + RT1318_SCLK_S_BCLK, + RT1318_SCLK_S_SDW, + RT1318_SCLK_S_PLL2F, + RT1318_SCLK_S_PLL2B, + RT1318_SCLK_S_MCLK, + RT1318_SCLK_S_RC0, + RT1318_SCLK_S_RC1, + RT1318_SCLK_S_RC2, +}; + +/* PLL Source */ +enum { + RT1318_PLL_S_BCLK0, + RT1318_PLL_S_BCLK1, + RT1318_PLL_S_RC, + RT1318_PLL_S_MCLK, + RT1318_PLL_S_SDW_IN_PLL, + RT1318_PLL_S_SDW_0, + RT1318_PLL_S_SDW_1, + RT1318_PLL_S_SDW_2, +}; + +/* TDM channel */ +enum { + RT1318_2CH, + RT1318_4CH, + RT1318_6CH, + RT1318_8CH, +}; + +/* R0 calibration result */ +enum { + RT1318_R0_OUT_OF_RANGE, + RT1318_R0_IN_RANGE, + RT1318_R0_CALIB_NOT_DONE, +}; + +/* PLL pre-defined M/N/K */ + +struct pll_calc_map { + unsigned int pll_in; + unsigned int pll_out; + int k; + int n; + int m; + bool m_bp; + bool k_bp; +}; + +struct rt1318_pll_code { + bool m_bp; /* Indicates bypass m code or not. */ + bool k_bp; /* Indicates bypass k code or not. */ + int m_code; + int n_code; + int k_code; +}; + +#endif /* __RT1318_H__ */ -- 2.34.1

3 2

[PATCH v2] ASoc: tas2781: Add new Kontrol to set tas2563 digital Volume
by Shenghao Ding 12 Jul '24

12 Jul '24

Requriment from customer to add new kcontrol to set tas2563 digital Volume Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- v2: - Volume controls should end in Volume - Write this as a switch statement for extension - Correct return value of tas2563_digital_gain_put - Submit tas2563 digital Volume as an independant patch --- include/sound/tas2781-tlv.h | 262 ++++++++++++++++++++++++++++++++- include/sound/tas2781.h | 1 + sound/soc/codecs/tas2781-i2c.c | 129 ++++++++++++++-- 3 files changed, 382 insertions(+), 10 deletions(-) diff --git a/include/sound/tas2781-tlv.h b/include/sound/tas2781-tlv.h index 1dc59005d241..99c41bfc7827 100644 --- a/include/sound/tas2781-tlv.h +++ b/include/sound/tas2781-tlv.h @@ -2,7 +2,7 @@ // // ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier // -// Copyright (C) 2022 - 2023 Texas Instruments Incorporated +// Copyright (C) 2022 - 2024 Texas Instruments Incorporated // https://www.ti.com // // The TAS2781 driver implements a flexible and configurable @@ -17,5 +17,265 @@ static const __maybe_unused DECLARE_TLV_DB_SCALE(dvc_tlv, -10000, 100, 0); static const DECLARE_TLV_DB_SCALE(amp_vol_tlv, 1100, 50, 0); +static const DECLARE_TLV_DB_SCALE(tas2563_dvc_tlv, -12150, 50, 1); +/* pow(10, db/20) * pow(2,30) */ +static const unsigned char tas2563_dvc_table[][4] = { + { 0X00, 0X00, 0X00, 0X00 }, /* -121.5db */ + { 0X00, 0X00, 0X03, 0XBC }, /* -121.0db */ + { 0X00, 0X00, 0X03, 0XF5 }, /* -120.5db */ + { 0X00, 0X00, 0X04, 0X31 }, /* -120.0db */ + { 0X00, 0X00, 0X04, 0X71 }, /* -119.5db */ + { 0X00, 0X00, 0X04, 0XB4 }, /* -119.0db */ + { 0X00, 0X00, 0X04, 0XFC }, /* -118.5db */ + { 0X00, 0X00, 0X05, 0X47 }, /* -118.0db */ + { 0X00, 0X00, 0X05, 0X97 }, /* -117.5db */ + { 0X00, 0X00, 0X05, 0XEC }, /* -117.0db */ + { 0X00, 0X00, 0X06, 0X46 }, /* -116.5db */ + { 0X00, 0X00, 0X06, 0XA5 }, /* -116.0db */ + { 0X00, 0X00, 0X07, 0X0A }, /* -115.5db */ + { 0X00, 0X00, 0X07, 0X75 }, /* -115.0db */ + { 0X00, 0X00, 0X07, 0XE6 }, /* -114.5db */ + { 0X00, 0X00, 0X08, 0X5E }, /* -114.0db */ + { 0X00, 0X00, 0X08, 0XDD }, /* -113.5db */ + { 0X00, 0X00, 0X09, 0X63 }, /* -113.0db */ + { 0X00, 0X00, 0X09, 0XF2 }, /* -112.5db */ + { 0X00, 0X00, 0X0A, 0X89 }, /* -112.0db */ + { 0X00, 0X00, 0X0B, 0X28 }, /* -111.5db */ + { 0X00, 0X00, 0X0B, 0XD2 }, /* -111.0db */ + { 0X00, 0X00, 0X0C, 0X85 }, /* -110.5db */ + { 0X00, 0X00, 0X0D, 0X43 }, /* -110.0db */ + { 0X00, 0X00, 0X0E, 0X0C }, /* -109.5db */ + { 0X00, 0X00, 0X0E, 0XE1 }, /* -109.0db */ + { 0X00, 0X00, 0X0F, 0XC3 }, /* -108.5db */ + { 0X00, 0X00, 0X10, 0XB2 }, /* -108.0db */ + { 0X00, 0X00, 0X11, 0XAF }, /* -107.5db */ + { 0X00, 0X00, 0X12, 0XBC }, /* -107.0db */ + { 0X00, 0X00, 0X13, 0XD8 }, /* -106.5db */ + { 0X00, 0X00, 0X15, 0X05 }, /* -106.0db */ + { 0X00, 0X00, 0X16, 0X44 }, /* -105.5db */ + { 0X00, 0X00, 0X17, 0X96 }, /* -105.0db */ + { 0X00, 0X00, 0X18, 0XFB }, /* -104.5db */ + { 0X00, 0X00, 0X1A, 0X76 }, /* -104.0db */ + { 0X00, 0X00, 0X1C, 0X08 }, /* -103.5db */ + { 0X00, 0X00, 0X1D, 0XB1 }, /* -103.0db */ + { 0X00, 0X00, 0X1F, 0X73 }, /* -102.5db */ + { 0X00, 0X00, 0X21, 0X51 }, /* -102.0db */ + { 0X00, 0X00, 0X23, 0X4A }, /* -101.5db */ + { 0X00, 0X00, 0X25, 0X61 }, /* -101.0db */ + { 0X00, 0X00, 0X27, 0X98 }, /* -100.5db */ + { 0X00, 0X00, 0X29, 0XF1 }, /* -100.0db */ + { 0X00, 0X00, 0X2C, 0X6D }, /* -99.5db */ + { 0X00, 0X00, 0X2F, 0X0F }, /* -99.0db */ + { 0X00, 0X00, 0X31, 0XD9 }, /* -98.5db */ + { 0X00, 0X00, 0X34, 0XCD }, /* -98.0db */ + { 0X00, 0X00, 0X37, 0XEE }, /* -97.5db */ + { 0X00, 0X00, 0X3B, 0X3F }, /* -97.0db */ + { 0X00, 0X00, 0X3E, 0XC1 }, /* -96.5db */ + { 0X00, 0X00, 0X42, 0X79 }, /* -96.0db */ + { 0X00, 0X00, 0X46, 0X6A }, /* -95.5db */ + { 0X00, 0X00, 0X4A, 0X96 }, /* -95.0db */ + { 0X00, 0X00, 0X4F, 0X01 }, /* -94.5db */ + { 0X00, 0X00, 0X53, 0XAF }, /* -94.0db */ + { 0X00, 0X00, 0X58, 0XA5 }, /* -93.5db */ + { 0X00, 0X00, 0X5D, 0XE6 }, /* -93.0db */ + { 0X00, 0X00, 0X63, 0X76 }, /* -92.5db */ + { 0X00, 0X00, 0X69, 0X5B }, /* -92.0db */ + { 0X00, 0X00, 0X6F, 0X99 }, /* -91.5db */ + { 0X00, 0X00, 0X76, 0X36 }, /* -91.0db */ + { 0X00, 0X00, 0X7D, 0X37 }, /* -90.5db */ + { 0X00, 0X00, 0X84, 0XA2 }, /* -90.0db */ + { 0X00, 0X00, 0X8C, 0X7E }, /* -89.5db */ + { 0X00, 0X00, 0X94, 0XD1 }, /* -89.0db */ + { 0X00, 0X00, 0X9D, 0XA3 }, /* -88.5db */ + { 0X00, 0X00, 0XA6, 0XFA }, /* -88.0db */ + { 0X00, 0X00, 0XB0, 0XDF }, /* -87.5db */ + { 0X00, 0X00, 0XBB, 0X5A }, /* -87.0db */ + { 0X00, 0X00, 0XC6, 0X74 }, /* -86.5db */ + { 0X00, 0X00, 0XD2, 0X36 }, /* -86.0db */ + { 0X00, 0X00, 0XDE, 0XAB }, /* -85.5db */ + { 0X00, 0X00, 0XEB, 0XDC }, /* -85.0db */ + { 0X00, 0X00, 0XF9, 0XD6 }, /* -84.5db */ + { 0X00, 0X01, 0X08, 0XA4 }, /* -84.0db */ + { 0X00, 0X01, 0X18, 0X52 }, /* -83.5db */ + { 0X00, 0X01, 0X28, 0XEF }, /* -83.0db */ + { 0X00, 0X01, 0X3A, 0X87 }, /* -82.5db */ + { 0X00, 0X01, 0X4D, 0X2A }, /* -82.0db */ + { 0X00, 0X01, 0X60, 0XE8 }, /* -81.5db */ + { 0X00, 0X01, 0X75, 0XD1 }, /* -81.0db */ + { 0X00, 0X01, 0X8B, 0XF7 }, /* -80.5db */ + { 0X00, 0X01, 0XA3, 0X6E }, /* -80.0db */ + { 0X00, 0X01, 0XBC, 0X48 }, /* -79.5db */ + { 0X00, 0X01, 0XD6, 0X9B }, /* -79.0db */ + { 0X00, 0X01, 0XF2, 0X7E }, /* -78.5db */ + { 0X00, 0X02, 0X10, 0X08 }, /* -78.0db */ + { 0X00, 0X02, 0X2F, 0X51 }, /* -77.5db */ + { 0X00, 0X02, 0X50, 0X76 }, /* -77.0db */ + { 0X00, 0X02, 0X73, 0X91 }, /* -76.5db */ + { 0X00, 0X02, 0X98, 0XC0 }, /* -76.0db */ + { 0X00, 0X02, 0XC0, 0X24 }, /* -75.5db */ + { 0X00, 0X02, 0XE9, 0XDD }, /* -75.0db */ + { 0X00, 0X03, 0X16, 0X0F }, /* -74.5db */ + { 0X00, 0X03, 0X44, 0XDF }, /* -74.0db */ + { 0X00, 0X03, 0X76, 0X76 }, /* -73.5db */ + { 0X00, 0X03, 0XAA, 0XFC }, /* -73.0db */ + { 0X00, 0X03, 0XE2, 0XA0 }, /* -72.5db */ + { 0X00, 0X04, 0X1D, 0X8F }, /* -72.0db */ + { 0X00, 0X04, 0X5B, 0XFD }, /* -71.5db */ + { 0X00, 0X04, 0X9E, 0X1D }, /* -71.0db */ + { 0X00, 0X04, 0XE4, 0X29 }, /* -70.5db */ + { 0X00, 0X05, 0X2E, 0X5A }, /* -70.0db */ + { 0X00, 0X05, 0X7C, 0XF2 }, /* -69.5db */ + { 0X00, 0X05, 0XD0, 0X31 }, /* -69.0db */ + { 0X00, 0X06, 0X28, 0X60 }, /* -68.5db */ + { 0X00, 0X06, 0X85, 0XC8 }, /* -68.0db */ + { 0X00, 0X06, 0XE8, 0XB9 }, /* -67.5db */ + { 0X00, 0X07, 0X51, 0X86 }, /* -67.0db */ + { 0X00, 0X07, 0XC0, 0X8A }, /* -66.5db */ + { 0X00, 0X08, 0X36, 0X21 }, /* -66.0db */ + { 0X00, 0X08, 0XB2, 0XB0 }, /* -65.5db */ + { 0X00, 0X09, 0X36, 0XA1 }, /* -65.0db */ + { 0X00, 0X09, 0XC2, 0X63 }, /* -64.5db */ + { 0X00, 0X0A, 0X56, 0X6D }, /* -64.0db */ + { 0X00, 0X0A, 0XF3, 0X3C }, /* -63.5db */ + { 0X00, 0X0B, 0X99, 0X56 }, /* -63.0db */ + { 0X00, 0X0C, 0X49, 0X48 }, /* -62.5db */ + { 0X00, 0X0D, 0X03, 0XA7 }, /* -62.0db */ + { 0X00, 0X0D, 0XC9, 0X11 }, /* -61.5db */ + { 0X00, 0X0E, 0X9A, 0X2D }, /* -61.0db */ + { 0X00, 0X0F, 0X77, 0XAD }, /* -60.5db */ + { 0X00, 0X10, 0X62, 0X4D }, /* -60.0db */ + { 0X00, 0X11, 0X5A, 0XD5 }, /* -59.5db */ + { 0X00, 0X12, 0X62, 0X16 }, /* -59.0db */ + { 0X00, 0X13, 0X78, 0XF0 }, /* -58.5db */ + { 0X00, 0X14, 0XA0, 0X50 }, /* -58.0db */ + { 0X00, 0X15, 0XD9, 0X31 }, /* -57.5db */ + { 0X00, 0X17, 0X24, 0X9C }, /* -57.0db */ + { 0X00, 0X18, 0X83, 0XAA }, /* -56.5db */ + { 0X00, 0X19, 0XF7, 0X86 }, /* -56.0db */ + { 0X00, 0X1B, 0X81, 0X6A }, /* -55.5db */ + { 0X00, 0X1D, 0X22, 0XA4 }, /* -55.0db */ + { 0X00, 0X1E, 0XDC, 0X98 }, /* -54.5db */ + { 0X00, 0X20, 0XB0, 0XBC }, /* -54.0db */ + { 0X00, 0X22, 0XA0, 0X9D }, /* -53.5db */ + { 0X00, 0X24, 0XAD, 0XE0 }, /* -53.0db */ + { 0X00, 0X26, 0XDA, 0X43 }, /* -52.5db */ + { 0X00, 0X29, 0X27, 0X9D }, /* -52.0db */ + { 0X00, 0X2B, 0X97, 0XE3 }, /* -51.5db */ + { 0X00, 0X2E, 0X2D, 0X27 }, /* -51.0db */ + { 0X00, 0X30, 0XE9, 0X9A }, /* -50.5db */ + { 0X00, 0X33, 0XCF, 0X8D }, /* -50.0db */ + { 0X00, 0X36, 0XE1, 0X78 }, /* -49.5db */ + { 0X00, 0X3A, 0X21, 0XF3 }, /* -49.0db */ + { 0X00, 0X3D, 0X93, 0XC3 }, /* -48.5db */ + { 0X00, 0X41, 0X39, 0XD3 }, /* -48.0db */ + { 0X00, 0X45, 0X17, 0X3B }, /* -47.5db */ + { 0X00, 0X49, 0X2F, 0X44 }, /* -47.0db */ + { 0X00, 0X4D, 0X85, 0X66 }, /* -46.5db */ + { 0X00, 0X52, 0X1D, 0X50 }, /* -46.0db */ + { 0X00, 0X56, 0XFA, 0XE8 }, /* -45.5db */ + { 0X00, 0X5C, 0X22, 0X4E }, /* -45.0db */ + { 0X00, 0X61, 0X97, 0XE1 }, /* -44.5db */ + { 0X00, 0X67, 0X60, 0X44 }, /* -44.0db */ + { 0X00, 0X6D, 0X80, 0X60 }, /* -43.5db */ + { 0X00, 0X73, 0XFD, 0X65 }, /* -43.0db */ + { 0X00, 0X7A, 0XDC, 0XD7 }, /* -42.5db */ + { 0X00, 0X82, 0X24, 0X8A }, /* -42.0db */ + { 0X00, 0X89, 0XDA, 0XAB }, /* -41.5db */ + { 0X00, 0X92, 0X05, 0XC6 }, /* -41.0db */ + { 0X00, 0X9A, 0XAC, 0XC8 }, /* -40.5db */ + { 0X00, 0XA3, 0XD7, 0X0A }, /* -40.0db */ + { 0X00, 0XAD, 0X8C, 0X52 }, /* -39.5db */ + { 0X00, 0XB7, 0XD4, 0XDD }, /* -39.0db */ + { 0X00, 0XC2, 0XB9, 0X65 }, /* -38.5db */ + { 0X00, 0XCE, 0X43, 0X28 }, /* -38.0db */ + { 0X00, 0XDA, 0X7B, 0XF1 }, /* -37.5db */ + { 0X00, 0XE7, 0X6E, 0X1E }, /* -37.0db */ + { 0X00, 0XF5, 0X24, 0XAC }, /* -36.5db */ + { 0X01, 0X03, 0XAB, 0X3D }, /* -36.0db */ + { 0X01, 0X13, 0X0E, 0X24 }, /* -35.5db */ + { 0X01, 0X23, 0X5A, 0X71 }, /* -35.0db */ + { 0X01, 0X34, 0X9D, 0XF8 }, /* -34.5db */ + { 0X01, 0X46, 0XE7, 0X5D }, /* -34.0db */ + { 0X01, 0X5A, 0X46, 0X27 }, /* -33.5db */ + { 0X01, 0X6E, 0XCA, 0XC5 }, /* -33.0db */ + { 0X01, 0X84, 0X86, 0X9F }, /* -32.5db */ + { 0X01, 0X9B, 0X8C, 0X27 }, /* -32.0db */ + { 0X01, 0XB3, 0XEE, 0XE5 }, /* -31.5db */ + { 0X01, 0XCD, 0XC3, 0X8C }, /* -31.0db */ + { 0X01, 0XE9, 0X20, 0X05 }, /* -30.5db */ + { 0X02, 0X06, 0X1B, 0X89 }, /* -30.0db */ + { 0X02, 0X24, 0XCE, 0XB0 }, /* -29.5db */ + { 0X02, 0X45, 0X53, 0X85 }, /* -29.0db */ + { 0X02, 0X67, 0XC5, 0XA2 }, /* -28.5db */ + { 0X02, 0X8C, 0X42, 0X3F }, /* -28.0db */ + { 0X02, 0XB2, 0XE8, 0X55 }, /* -27.5db */ + { 0X02, 0XDB, 0XD8, 0XAD }, /* -27.0db */ + { 0X03, 0X07, 0X36, 0X05 }, /* -26.5db */ + { 0X03, 0X35, 0X25, 0X29 }, /* -26.0db */ + { 0X03, 0X65, 0XCD, 0X13 }, /* -25.5db */ + { 0X03, 0X99, 0X57, 0X0C }, /* -25.0db */ + { 0X03, 0XCF, 0XEE, 0XCF }, /* -24.5db */ + { 0X04, 0X09, 0XC2, 0XB0 }, /* -24.0db */ + { 0X04, 0X47, 0X03, 0XC1 }, /* -23.5db */ + { 0X04, 0X87, 0XE5, 0XFB }, /* -23.0db */ + { 0X04, 0XCC, 0XA0, 0X6D }, /* -22.5db */ + { 0X05, 0X15, 0X6D, 0X68 }, /* -22.0db */ + { 0X05, 0X62, 0X8A, 0XB3 }, /* -21.5db */ + { 0X05, 0XB4, 0X39, 0XBC }, /* -21.0db */ + { 0X06, 0X0A, 0XBF, 0XD4 }, /* -20.5db */ + { 0X06, 0X66, 0X66, 0X66 }, /* -20.0db */ + { 0X06, 0XC7, 0X7B, 0X36 }, /* -19.5db */ + { 0X07, 0X2E, 0X50, 0XA6 }, /* -19.0db */ + { 0X07, 0X9B, 0X3D, 0XF6 }, /* -18.5db */ + { 0X08, 0X0E, 0X9F, 0X96 }, /* -18.0db */ + { 0X08, 0X88, 0XD7, 0X6D }, /* -17.5db */ + { 0X09, 0X0A, 0X4D, 0X2F }, /* -17.0db */ + { 0X09, 0X93, 0X6E, 0XB8 }, /* -16.5db */ + { 0X0A, 0X24, 0XB0, 0X62 }, /* -16.0db */ + { 0X0A, 0XBE, 0X8D, 0X70 }, /* -15.5db */ + { 0X0B, 0X61, 0X88, 0X71 }, /* -15.0db */ + { 0X0C, 0X0E, 0X2B, 0XB0 }, /* -14.5db */ + { 0X0C, 0XC5, 0X09, 0XAB }, /* -14.0db */ + { 0X0D, 0X86, 0XBD, 0X8D }, /* -13.5db */ + { 0X0E, 0X53, 0XEB, 0XB3 }, /* -13.0db */ + { 0X0F, 0X2D, 0X42, 0X38 }, /* -12.5db */ + { 0X10, 0X13, 0X79, 0X87 }, /* -12.0db */ + { 0X11, 0X07, 0X54, 0XF9 }, /* -11.5db */ + { 0X12, 0X09, 0XA3, 0X7A }, /* -11.0db */ + { 0X13, 0X1B, 0X40, 0X39 }, /* -10.5db */ + { 0X14, 0X3D, 0X13, 0X62 }, /* -10.0db */ + { 0X15, 0X70, 0X12, 0XE1 }, /* -9.5db */ + { 0X16, 0XB5, 0X43, 0X37 }, /* -9.0db */ + { 0X18, 0X0D, 0XB8, 0X54 }, /* -8.5db */ + { 0X19, 0X7A, 0X96, 0X7F }, /* -8.0db */ + { 0X1A, 0XFD, 0X13, 0X54 }, /* -7.5db */ + { 0X1C, 0X96, 0X76, 0XC6 }, /* -7.0db */ + { 0X1E, 0X48, 0X1C, 0X37 }, /* -6.5db */ + { 0X20, 0X13, 0X73, 0X9E }, /* -6.0db */ + { 0X21, 0XFA, 0X02, 0XBF }, /* -5.5db */ + { 0X23, 0XFD, 0X66, 0X78 }, /* -5.0db */ + { 0X26, 0X1F, 0X54, 0X1C }, /* -4.5db */ + { 0X28, 0X61, 0X9A, 0XE9 }, /* -4.0db */ + { 0X2A, 0XC6, 0X25, 0X91 }, /* -3.5db */ + { 0X2D, 0X4E, 0XFB, 0XD5 }, /* -3.0db */ + { 0X2F, 0XFE, 0X44, 0X48 }, /* -2.5db */ + { 0X32, 0XD6, 0X46, 0X17 }, /* -2.0db */ + { 0X35, 0XD9, 0X6B, 0X02 }, /* -1.5db */ + { 0X39, 0X0A, 0X41, 0X5F }, /* -1.0db */ + { 0X3C, 0X6B, 0X7E, 0X4F }, /* -0.5db */ + { 0X40, 0X00, 0X00, 0X00 }, /* 0.0db */ + { 0X43, 0XCA, 0XD0, 0X22 }, /* 0.5db */ + { 0X47, 0XCF, 0X26, 0X7D }, /* 1.0db */ + { 0X4C, 0X10, 0X6B, 0XA5 }, /* 1.5db */ + { 0X50, 0X92, 0X3B, 0XE3 }, /* 2.0db */ + { 0X55, 0X58, 0X6A, 0X46 }, /* 2.5db */ + { 0X5A, 0X67, 0X03, 0XDF }, /* 3.0db */ + { 0X5F, 0XC2, 0X53, 0X32 }, /* 3.5db */ + { 0X65, 0X6E, 0XE3, 0XDB }, /* 4.0db */ + { 0X6B, 0X71, 0X86, 0X68 }, /* 4.5db */ + { 0X71, 0XCF, 0X54, 0X71 }, /* 5.0db */ + { 0X78, 0X8D, 0XB4, 0XE9 }, /* 5.5db */ + { 0XFF, 0XFF, 0XFF, 0XFF }, /* 6.0db */ +}; #endif diff --git a/include/sound/tas2781.h b/include/sound/tas2781.h index a43ad6dcb7c7..18161d02a96f 100644 --- a/include/sound/tas2781.h +++ b/include/sound/tas2781.h @@ -50,6 +50,7 @@ #define TASDEVICE_I2CChecksum TASDEVICE_REG(0x0, 0x0, 0x7E) /* Volume control */ +#define TAS2563_DVC_LVL TASDEVICE_REG(0x00, 0x02, 0x0C) #define TAS2781_DVC_LVL TASDEVICE_REG(0x0, 0x0, 0x1A) #define TAS2781_AMP_LEVEL TASDEVICE_REG(0x0, 0x0, 0x03) #define TAS2781_AMP_LEVEL_MASK GENMASK(5, 1) diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c index d5d95ae57c73..e79d613745b4 100644 --- a/sound/soc/codecs/tas2781-i2c.c +++ b/sound/soc/codecs/tas2781-i2c.c @@ -31,6 +31,7 @@ #include <sound/tas2781.h> #include <sound/tlv.h> #include <sound/tas2781-tlv.h> +#include <asm/unaligned.h> static const struct i2c_device_id tasdevice_id[] = { { "tas2563", TAS2563 }, @@ -140,6 +141,101 @@ static int tasdev_force_fwload_put(struct snd_kcontrol *kcontrol, return change; } +static int tas2563_digital_gain_get( + struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + unsigned int l = 0, r = mc->max; + unsigned int target, ar_mid, mid, ar_l, ar_r; + unsigned int reg = mc->reg; + unsigned char data[4]; + int ret; + + mutex_lock(&tas_dev->codec_lock); + /* Read the primary device */ + ret = tasdevice_dev_bulk_read(tas_dev, 0, reg, data, 4); + if (ret) { + dev_err(tas_dev->dev, "%s, get AMP vol error\n", __func__); + goto out; + } + + target = get_unaligned_be32(&data[0]); + + while (r > 1 + l) { + mid = (l + r) / 2; + ar_mid = get_unaligned_be32(tas2563_dvc_table[mid]); + if (target < ar_mid) + r = mid; + else + l = mid; + } + + ar_l = get_unaligned_be32(tas2563_dvc_table[l]); + ar_r = get_unaligned_be32(tas2563_dvc_table[r]); + + /* find out the member same as or closer to the current volume */ + ucontrol->value.integer.value[0] = + abs(target - ar_l) <= abs(target - ar_r) ? l : r; +out: + mutex_unlock(&tas_dev->codec_lock); + return 0; +} + +static int tas2563_digital_gain_put( + struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + int vol = ucontrol->value.integer.value[0]; + int status = 0, max = mc->max, rc = 1; + int i, ret; + unsigned int reg = mc->reg; + unsigned int volrd, volwr; + unsigned char data[4]; + + vol = clamp(vol, 0, max); + mutex_lock(&tas_dev->codec_lock); + /* Read the primary device */ + ret = tasdevice_dev_bulk_read(tas_dev, 0, reg, data, 4); + if (ret) { + dev_err(tas_dev->dev, "%s, get AMP vol error\n", __func__); + rc = -1; + goto out; + } + + volrd = get_unaligned_be32(&data[0]); + volwr = get_unaligned_be32(tas2563_dvc_table[vol]); + + if (volrd == volwr) { + rc = 0; + goto out; + } + + for (i = 0; i < tas_dev->ndev; i++) { + ret = tasdevice_dev_bulk_write(tas_dev, i, reg, + (unsigned char *)tas2563_dvc_table[vol], 4); + if (ret) { + dev_err(tas_dev->dev, + "%s, set digital vol error in dev %d\n", + __func__, i); + status |= BIT(i); + } + } + + if (status) + rc = -1; +out: + mutex_unlock(&tas_dev->codec_lock); + return rc; +} + static const struct snd_kcontrol_new tasdevice_snd_controls[] = { SOC_SINGLE_BOOL_EXT("Speaker Force Firmware Load", 0, tasdev_force_fwload_get, tasdev_force_fwload_put), @@ -154,6 +250,13 @@ static const struct snd_kcontrol_new tas2781_snd_controls[] = { tas2781_digital_putvol, dvc_tlv), }; +static const struct snd_kcontrol_new tas2563_snd_controls[] = { + SOC_SINGLE_RANGE_EXT_TLV("Speaker Digital Volume", TAS2563_DVC_LVL, 0, + 0, ARRAY_SIZE(tas2563_dvc_table) - 1, 0, + tas2563_digital_gain_get, tas2563_digital_gain_put, + tas2563_dvc_tlv), +}; + static int tasdevice_set_profile_id(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { @@ -593,17 +696,25 @@ static struct snd_soc_dai_driver tasdevice_dai_driver[] = { static int tasdevice_codec_probe(struct snd_soc_component *codec) { struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(codec); + struct snd_kcontrol_new *p; + unsigned int size; int rc; - if (tas_priv->chip_id == TAS2781) { - rc = snd_soc_add_component_controls(codec, - tas2781_snd_controls, - ARRAY_SIZE(tas2781_snd_controls)); - if (rc < 0) { - dev_err(tas_priv->dev, "%s: Add control err rc = %d", - __func__, rc); - return rc; - } + switch (tas_priv->chip_id) { + case TAS2781: + p = (struct snd_kcontrol_new *)tas2781_snd_controls; + size = ARRAY_SIZE(tas2781_snd_controls); + break; + default: + p = (struct snd_kcontrol_new *)tas2563_snd_controls; + size = ARRAY_SIZE(tas2563_snd_controls); + } + + rc = snd_soc_add_component_controls(codec, p, size); + if (rc < 0) { + dev_err(tas_priv->dev, "%s: Add control err rc = %d", + __func__, rc); + return rc; } tas_priv->name_prefix = codec->name_prefix; -- 2.34.1

2 1

[PATCH] ASoC: dt-bindings: cirrus,cs42xx8: Convert to dtschema
by Animesh Agarwal 12 Jul '24

12 Jul '24

Convert the Cirrus Logic CS42448/CS42888 audio CODEC bindings to DT schema format. Set power supply properties to required only for CS42888. Cc: Daniel Baluta <daniel.baluta(a)nxp.com> Signed-off-by: Animesh Agarwal <animeshagarwal28(a)gmail.com> --- .../bindings/sound/cirrus,cs42xx8.yaml | 81 +++++++++++++++++++ .../devicetree/bindings/sound/cs42xx8.txt | 34 -------- 2 files changed, 81 insertions(+), 34 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/cirrus,cs42xx8.yaml delete mode 100644 Documentation/devicetree/bindings/sound/cs42xx8.txt diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs42xx8.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs42xx8.yaml new file mode 100644 index 000000000000..725b47e82062 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cirrus,cs42xx8.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/cirrus,cs42xx8.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic CS42448/CS42888 audio CODEC + +maintainers: + - patches(a)opensource.cirrus.com + +properties: + compatible: + enum: + - cirrus,cs42448 + - cirrus,cs42888 + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + const: mclk + + VA-supply: + description: Analog power supply. + + VD-supply: + description: Digital power supply. + + VLC-supply: + description: Control port power supply + + VLS-supply: + description: Serial port interface power supply. + + reset-gpios: + description: This pin is connected to the chip's RESET pin. + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + +if: + properties: + compatible: + contains: + const: cirrus,cs42888 +then: + required: + - VA-supply + - VD-supply + - VLC-supply + - VLS-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec@48 { + compatible = "cirrus,cs42888"; + reg = <0x48>; + clocks = <&codec_mclk 0>; + clock-names = "mclk"; + VA-supply = <&reg_audio>; + VD-supply = <&reg_audio>; + VLS-supply = <&reg_audio>; + VLC-supply = <&reg_audio>; + reset-gpios = <&gpio 1>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/cs42xx8.txt b/Documentation/devicetree/bindings/sound/cs42xx8.txt deleted file mode 100644 index bbfe39347c20..000000000000 --- a/Documentation/devicetree/bindings/sound/cs42xx8.txt +++ /dev/null @@ -1,34 +0,0 @@ -CS42448/CS42888 audio CODEC - -Required properties: - - - compatible : must contain one of "cirrus,cs42448" and "cirrus,cs42888" - - - reg : the I2C address of the device for I2C - - - clocks : a list of phandles + clock-specifiers, one for each entry in - clock-names - - - clock-names : must contain "mclk" - - - VA-supply, VD-supply, VLS-supply, VLC-supply: power supplies for the device, - as covered in Documentation/devicetree/bindings/regulator/regulator.txt - -Optional properties: - - - reset-gpios : a GPIO spec to define which pin is connected to the chip's - !RESET pin - -Example: - -cs42888: codec@48 { - compatible = "cirrus,cs42888"; - reg = <0x48>; - clocks = <&codec_mclk 0>; - clock-names = "mclk"; - VA-supply = <&reg_audio>; - VD-supply = <&reg_audio>; - VLS-supply = <&reg_audio>; - VLC-supply = <&reg_audio>; - reset-gpios = <&pca9557_b 1 GPIO_ACTIVE_LOW>; -}; -- 2.45.2

3 2

[PATCH v2 00/10] Add support for non-interleaved mode in qmc_audio
by Herve Codina 12 Jul '24

12 Jul '24

The qmc_audio driver supports only audio in interleaved mode. Non-interleaved mode can be easily supported using several QMC channel per DAI. In that case, data related to ch0 are sent to (received from) the first QMC channel, data related to ch1 use the next QMC channel and so on up to the last channel. In terms of constraints and settings, the interleaved and non-interleaved modes are slightly different. In interleaved mode: - The sample size should fit in the number of time-slots available for the QMC channel. - The number of audio channels should fit in the number of time-slots (taking into account the sample size) available for the QMC channel. In non-interleaved mode: - The number of audio channels is the number of available QMC channels. - Each QMC channel should have the same number of time-slots. - The sample size equals the number of time-slots of one QMC channel. This series add support for the non-interleaved mode in the qmc_audio driver and is composed of the following parts: - Patches 1 and 2: Fix some issues in the qmc_audio - Patches 3 to 6: Prepare qmc_audio for the non-interleaved mode - Patches 7 and 8: Extend the QMC driver API - Patches 9 and 10: The support for non-interleaved mode itself Compared to the previous iteration, this v2 series mainly improves qmc_audio_access_is_interleaved(). Best regards, Hervé Link to v1: https://lore.kernel.org/lkml/20240620084300.397853-1-herve.codina@bootlin.c… Changes v1 -> v2 - Patches 1 to 8 No changes - Patch 9 Add 'Reviewed-by: Rob Herring (Arm) <robh(a)kernel.org>' - Patch 10 Remove unneeded ';' Modify qmc_audio_access_is_interleaved() Herve Codina (10): ASoC: fsl: fsl_qmc_audio: Check devm_kasprintf() returned value ASoC: fsl: fsl_qmc_audio: Fix issues detected by checkpatch ASoC: fsl: fsl_qmc_audio: Split channel buffer and PCM pointer handling ASoC: fsl: fsl_qmc_audio: Identify the QMC channel involved in completion routines ASoC: fsl: fsl_qmc_audio: Introduce qmc_audio_pcm_{read,write}_submit() ASoC: fsl: fsl_qmc_audio: Introduce qmc_dai_constraints_interleaved() soc: fsl: cpm1: qmc: Introduce functions to get a channel from a phandle list soc: fsl: cpm1: qmc: Introduce qmc_chan_count_phandles() dt-bindings: sound: fsl,qmc-audio: Add support for multiple QMC channels per DAI ASoC: fsl: fsl_qmc_audio: Add support for non-interleaved mode. .../bindings/sound/fsl,qmc-audio.yaml | 41 +- drivers/soc/fsl/qe/qmc.c | 32 +- include/soc/fsl/qe/qmc.h | 27 +- sound/soc/fsl/fsl_qmc_audio.c | 591 +++++++++++++----- 4 files changed, 506 insertions(+), 185 deletions(-) -- 2.45.0

4 15

[PATCH] ASoC: codecs: wsa884x: Implement temperature reading and hwmon
by Krzysztof Kozlowski 12 Jul '24

12 Jul '24

Read temperature of the speaker and expose it via hwmon interface, which will be later used during calibration of speaker protection algorithms. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- sound/soc/codecs/wsa884x.c | 197 +++++++++++++++++++++++++++++++++++++ 1 file changed, 197 insertions(+) diff --git a/sound/soc/codecs/wsa884x.c b/sound/soc/codecs/wsa884x.c index 7b19df9c1728..5f4acd66f942 100644 --- a/sound/soc/codecs/wsa884x.c +++ b/sound/soc/codecs/wsa884x.c @@ -5,11 +5,14 @@ */ #include <linux/bitfield.h> +#include <linux/cleanup.h> #include <linux/device.h> #include <linux/gpio/consumer.h> +#include <linux/hwmon.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/module.h> +#include <linux/mutex.h> #include <linux/pm_runtime.h> #include <linux/regmap.h> #include <linux/regulator/consumer.h> @@ -301,8 +304,28 @@ #define WSA884X_PA_FSM_MSK1 (WSA884X_DIG_CTRL0_BASE + 0x3b) #define WSA884X_PA_FSM_BYP_CTL (WSA884X_DIG_CTRL0_BASE + 0x3c) #define WSA884X_PA_FSM_BYP0 (WSA884X_DIG_CTRL0_BASE + 0x3d) +#define WSA884X_PA_FSM_BYP0_DC_CAL_EN_MASK 0x01 +#define WSA884X_PA_FSM_BYP0_DC_CAL_EN_SHIFT 0 +#define WSA884X_PA_FSM_BYP0_CLK_WD_EN_MASK 0x02 +#define WSA884X_PA_FSM_BYP0_CLK_WD_EN_SHIFT 1 +#define WSA884X_PA_FSM_BYP0_BG_EN_MASK 0x04 +#define WSA884X_PA_FSM_BYP0_BG_EN_SHIFT 2 +#define WSA884X_PA_FSM_BYP0_BOOST_EN_MASK 0x08 +#define WSA884X_PA_FSM_BYP0_BOOST_EN_SHIFT 3 +#define WSA884X_PA_FSM_BYP0_PA_EN_MASK 0x10 +#define WSA884X_PA_FSM_BYP0_PA_EN_SHIFT 4 +#define WSA884X_PA_FSM_BYP0_D_UNMUTE_MASK 0x20 +#define WSA884X_PA_FSM_BYP0_D_UNMUTE_SHIFT 5 +#define WSA884X_PA_FSM_BYP0_SPKR_PROT_EN_MASK 0x40 +#define WSA884X_PA_FSM_BYP0_SPKR_PROT_EN_SHIFT 6 +#define WSA884X_PA_FSM_BYP0_TSADC_EN_MASK 0x80 +#define WSA884X_PA_FSM_BYP0_TSADC_EN_SHIFT 7 #define WSA884X_PA_FSM_BYP1 (WSA884X_DIG_CTRL0_BASE + 0x3e) #define WSA884X_TADC_VALUE_CTL (WSA884X_DIG_CTRL0_BASE + 0x50) +#define WSA884X_TADC_VALUE_CTL_TEMP_VALUE_RD_EN_MASK 0x01 +#define WSA884X_TADC_VALUE_CTL_TEMP_VALUE_RD_EN_SHIFT 0 +#define WSA884X_TADC_VALUE_CTL_VBAT_VALUE_RD_EN_MASK 0x02 +#define WSA884X_TADC_VALUE_CTL_VBAT_VALUE_RD_EN_SHIFT 1 #define WSA884X_TEMP_DETECT_CTL (WSA884X_DIG_CTRL0_BASE + 0x51) #define WSA884X_TEMP_DIN_MSB (WSA884X_DIG_CTRL0_BASE + 0x52) #define WSA884X_TEMP_DIN_LSB (WSA884X_DIG_CTRL0_BASE + 0x53) @@ -691,6 +714,17 @@ SNDRV_PCM_FMTBIT_S24_LE |\ SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S32_LE) +/* Two-point trimming for temperature calibration */ +#define WSA884X_T1_TEMP -10L +#define WSA884X_T2_TEMP 150L + +/* + * Device will report senseless data in many cases, so discard any measurements + * outside of valid range. + */ +#define WSA884X_LOW_TEMP_THRESHOLD 5 +#define WSA884X_HIGH_TEMP_THRESHOLD 45 + struct wsa884x_priv { struct regmap *regmap; struct device *dev; @@ -706,6 +740,13 @@ struct wsa884x_priv { int active_ports; int dev_mode; bool hw_init; + /* + * Protects temperature reading code (related to speaker protection) and + * fields: temperature and pa_on. + */ + struct mutex sp_lock; + unsigned int temperature; + bool pa_on; }; enum { @@ -1650,6 +1691,10 @@ static int wsa884x_spkr_event(struct snd_soc_dapm_widget *w, switch (event) { case SND_SOC_DAPM_POST_PMU: + mutex_lock(&wsa884x->sp_lock); + wsa884x->pa_on = true; + mutex_unlock(&wsa884x->sp_lock); + wsa884x_spkr_post_pmu(component, wsa884x); snd_soc_component_write_field(component, WSA884X_PDM_WD_CTL, @@ -1661,6 +1706,10 @@ static int wsa884x_spkr_event(struct snd_soc_dapm_widget *w, snd_soc_component_write_field(component, WSA884X_PDM_WD_CTL, WSA884X_PDM_WD_CTL_PDM_WD_EN_MASK, 0x0); + + mutex_lock(&wsa884x->sp_lock); + wsa884x->pa_on = false; + mutex_unlock(&wsa884x->sp_lock); break; } @@ -1800,6 +1849,144 @@ static struct snd_soc_dai_driver wsa884x_dais[] = { }, }; +static int wsa884x_get_temp(struct wsa884x_priv *wsa884x, long *temp) +{ + unsigned int d1_msb = 0, d1_lsb = 0, d2_msb = 0, d2_lsb = 0; + unsigned int dmeas_msb = 0, dmeas_lsb = 0; + int d1, d2, dmeas; + unsigned int mask; + long val; + int ret; + + guard(mutex)(&wsa884x->sp_lock); + + if (wsa884x->pa_on) { + /* + * Reading temperature is possible only when Power Amplifier is + * off. Report last cached data. + */ + *temp = wsa884x->temperature; + return 0; + } + + ret = pm_runtime_resume_and_get(wsa884x->dev); + if (ret < 0) + return ret; + + mask = WSA884X_PA_FSM_BYP0_DC_CAL_EN_MASK | + WSA884X_PA_FSM_BYP0_CLK_WD_EN_MASK | + WSA884X_PA_FSM_BYP0_BG_EN_MASK | + WSA884X_PA_FSM_BYP0_D_UNMUTE_MASK | + WSA884X_PA_FSM_BYP0_SPKR_PROT_EN_MASK | + WSA884X_PA_FSM_BYP0_TSADC_EN_MASK; + /* + * Here and further do not care about read or update failures. + * For example, before turning on Power Amplifier for the first + * time, reading WSA884X_TEMP_DIN_MSB will always return 0. + * Instead, check if returned value is within reasonable + * thresholds. + */ + regmap_update_bits(wsa884x->regmap, WSA884X_PA_FSM_BYP0, mask, mask); + + regmap_update_bits(wsa884x->regmap, WSA884X_TADC_VALUE_CTL, + WSA884X_TADC_VALUE_CTL_TEMP_VALUE_RD_EN_MASK, + FIELD_PREP(WSA884X_TADC_VALUE_CTL_TEMP_VALUE_RD_EN_MASK, 0x0)); + + regmap_read(wsa884x->regmap, WSA884X_TEMP_DIN_MSB, &dmeas_msb); + regmap_read(wsa884x->regmap, WSA884X_TEMP_DIN_LSB, &dmeas_lsb); + + regmap_update_bits(wsa884x->regmap, WSA884X_TADC_VALUE_CTL, + WSA884X_TADC_VALUE_CTL_TEMP_VALUE_RD_EN_MASK, + FIELD_PREP(WSA884X_TADC_VALUE_CTL_TEMP_VALUE_RD_EN_MASK, 0x1)); + + regmap_read(wsa884x->regmap, WSA884X_OTP_REG_1, &d1_msb); + regmap_read(wsa884x->regmap, WSA884X_OTP_REG_2, &d1_lsb); + regmap_read(wsa884x->regmap, WSA884X_OTP_REG_3, &d2_msb); + regmap_read(wsa884x->regmap, WSA884X_OTP_REG_4, &d2_lsb); + + regmap_update_bits(wsa884x->regmap, WSA884X_PA_FSM_BYP0, mask, 0x0); + + dmeas = (((dmeas_msb & 0xff) << 0x8) | (dmeas_lsb & 0xff)) >> 0x6; + d1 = (((d1_msb & 0xff) << 0x8) | (d1_lsb & 0xff)) >> 0x6; + d2 = (((d2_msb & 0xff) << 0x8) | (d2_lsb & 0xff)) >> 0x6; + + if (d1 == d2) { + /* Incorrect data in OTP? */ + ret = -EINVAL; + goto out; + } + + val = WSA884X_T1_TEMP + (((dmeas - d1) * (WSA884X_T2_TEMP - WSA884X_T1_TEMP))/(d2 - d1)); + + dev_dbg(wsa884x->dev, "Measured temp %ld (dmeas=%d, d1=%d, d2=%d)\n", + val, dmeas, d1, d2); + + if ((val > WSA884X_LOW_TEMP_THRESHOLD) && + (val < WSA884X_HIGH_TEMP_THRESHOLD)) { + wsa884x->temperature = val; + *temp = val; + ret = 0; + } else { + ret = -EAGAIN; + } + +out: + pm_runtime_mark_last_busy(wsa884x->dev); + pm_runtime_put_autosuspend(wsa884x->dev); + + return ret; +} + +static umode_t wsa884x_hwmon_is_visible(const void *data, + enum hwmon_sensor_types type, u32 attr, + int channel) +{ + if (type != hwmon_temp) + return 0; + + switch (attr) { + case hwmon_temp_input: + return 0444; + default: + break; + } + + return 0; +} + +static int wsa884x_hwmon_read(struct device *dev, + enum hwmon_sensor_types type, + u32 attr, int channel, long *temp) +{ + int ret; + + switch (attr) { + case hwmon_temp_input: + ret = wsa884x_get_temp(dev_get_drvdata(dev), temp); + break; + default: + ret = -EOPNOTSUPP; + break; + } + + return ret; +} + +static const struct hwmon_channel_info *const wsa884x_hwmon_info[] = { + HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT), + NULL +}; + +static const struct hwmon_ops wsa884x_hwmon_ops = { + .is_visible = wsa884x_hwmon_is_visible, + .read = wsa884x_hwmon_read, +}; + +static const struct hwmon_chip_info wsa884x_hwmon_chip_info = { + .ops = &wsa884x_hwmon_ops, + .info = wsa884x_hwmon_info, +}; + static void wsa884x_reset_powerdown(void *data) { struct wsa884x_priv *wsa884x = data; @@ -1849,6 +2036,7 @@ static int wsa884x_probe(struct sdw_slave *pdev, { struct device *dev = &pdev->dev; struct wsa884x_priv *wsa884x; + struct device *hwmon; unsigned int i; int ret; @@ -1856,6 +2044,8 @@ static int wsa884x_probe(struct sdw_slave *pdev, if (!wsa884x) return -ENOMEM; + mutex_init(&wsa884x->sp_lock); + for (i = 0; i < WSA884X_SUPPLIES_NUM; i++) wsa884x->supplies[i].supply = wsa884x_supply_name[i]; @@ -1913,6 +2103,13 @@ static int wsa884x_probe(struct sdw_slave *pdev, regcache_cache_only(wsa884x->regmap, true); wsa884x->hw_init = true; + hwmon = devm_hwmon_device_register_with_info(dev, "wsa884x", wsa884x, + &wsa884x_hwmon_chip_info, + NULL); + if (IS_ERR(hwmon)) + return dev_err_probe(dev, PTR_ERR(hwmon), + "Failed to register hwmon sensor\n"); + pm_runtime_set_autosuspend_delay(dev, 3000); pm_runtime_use_autosuspend(dev); pm_runtime_mark_last_busy(dev); -- 2.43.0

1 0

[PATCH v9] ALSA: hda/tas2781: Add tas2781 hda SPI driver
by baojun.xu＠ti.com 12 Jul '24

12 Jul '24

The content of this message was lost. It was probably cross-posted to multiple lists and previously handled on another list.

3 2

[GIT PULL] ASoC fixes for v6.10-rc7
by Mark Brown 11 Jul '24

11 Jul '24

The following changes since commit 68f97fe330e01450ace63da0ce5cab676fc97f9a: ASoC: rt5645: fix issue of random interrupt from push-button (2024-06-26 16:34:48 +0100) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git tags/asoc-fix-v6.10-rc7 for you to fetch changes up to 680e126ec0400f6daecf0510c5bb97a55779ff03: firmware: cs_dsp: Use strnlen() on name fields in V1 wmfw files (2024-07-08 15:55:11 +0100) ---------------------------------------------------------------- ASoC: Fixes for v6.10 A few fairly small fixes for ASoC, there's a relatively large set of hardening changes for the cs_dsp firmware file parsing and a couple of other small device specific fixes. ---------------------------------------------------------------- Bard Liao (1): ASoC: rt711-sdw: add missing readable registers Kai Vehmanen (1): ASoC: SOF: Intel: hda: fix null deref on system suspend entry Peter Ujfalusi (1): ASoC: SOF: Intel: hda-pcm: Limit the maximum number of periods by MAX_BDL_ENTRIES Richard Fitzgerald (5): firmware: cs_dsp: Fix overflow checking of wmfw header firmware: cs_dsp: Return error if block header overflows file firmware: cs_dsp: Validate payload length before processing block firmware: cs_dsp: Prevent buffer overrun when processing V2 alg headers firmware: cs_dsp: Use strnlen() on name fields in V1 wmfw files drivers/firmware/cirrus/cs_dsp.c | 227 ++++++++++++++++++++++++++++----------- sound/soc/codecs/rt711-sdw.c | 2 + sound/soc/sof/intel/hda-dai.c | 12 +-- sound/soc/sof/intel/hda-pcm.c | 6 ++ 4 files changed, 176 insertions(+), 71 deletions(-)

2 1

Re: [syzbot] [mm?] INFO: rcu detected stall in sys_wait4 (4)
by syzbot 11 Jul '24

11 Jul '24

syzbot suspects this issue was fixed by commit: commit fb66df20a7201e60f2b13d7f95d031b31a8831d3 Author: Vladimir Oltean <vladimir.oltean(a)nxp.com> Date: Mon May 27 15:39:55 2024 +0000 net/sched: taprio: extend minimum interval restriction to entire cycle too bisection log: https://syzkaller.appspot.com/x/bisect.txt?x=10593441980000 start commit: fe46a7dd189e Merge tag 'sound-6.9-rc1' of git://git.kernel.. git tree: upstream kernel config: https://syzkaller.appspot.com/x/.config?x=fe78468a74fdc3b7 dashboard link: https://syzkaller.appspot.com/bug?extid=6969434de600a6ba9f07 syz repro: https://syzkaller.appspot.com/x/repro.syz?x=1091a5f6180000 C reproducer: https://syzkaller.appspot.com/x/repro.c?x=17a22c13180000 If the result looks correct, please mark the issue as fixed by replying with: #syz fix: net/sched: taprio: extend minimum interval restriction to entire cycle too For information about bisection process see: https://goo.gl/tpsmEJ#bisection

1 0

[PATCH v8] ALSA: hda/tas2781: Add tas2781 hda SPI driver
by Baojun Xu 11 Jul '24

11 Jul '24

This patch was used to add TAS2781 devices on SPI support in sound/pci/hda. It use ACPI node descript about parameters of TAS2781 on SPI, it like: Scope (_SB.PC00.SPI0) { Device (GSPK) { Name (_HID, "TXNW2781") // _HID: Hardware ID Method (_CRS, 0, NotSerialized) { Name (RBUF, ResourceTemplate () { SpiSerialBusV2 (...) SpiSerialBusV2 (...) } } } } And in platform/x86/serial-multi-instantiate.c, those spi devices will be added into system as a single SPI device, so TAS2781 SPI driver will probe twice for every single SPI device. And driver will also parser mono DSP firmware binary and RCA binary for itself. The code support Realtek as the primary codec. Signed-off-by: Baojun Xu <baojun.xu(a)ti.com> --- v8: - Move *-y position in sound/pci/hda/Makefile. - Change + to | for bit operation in macro define. - Change TASDEVICE_Checksum to TASDEVICE_CHECKSUM. v7: - Add new project Gemtree (0x103c8daa) support for tas2781 spi driver. v6: - Remove client in tasdevice_priv struct as it was not used. - Change format for tasdevice_spi_dev_write() in tas2781_hda_spi.c. - Change update bits function to read & write mode, as tas2781 use last bit to mask read & write, it cause regmap_update_bits work not as our expected. - Add element in tas2781_snd_controls, tas2781_prof_ctrl, tas2781_dsp_conf_ctrl, to support second device. Previous version add sound card for first index only. - Change calibration registers address declaire to TASDEVICE_REG() mode. - Add snd_ctl_new1() for second device. - Change format for tas2781_hda_unbind() to fit 79 chars in one line. - Remove client for spi as it was not used. - Remove unused variables. - Remove cur_prog clean in runtime_suspend(). - Remove unused variables. - Add tasdevice_spi_tuning_switch() in runtime_resume. - Remove cur_prog clean in system_resume(). - Add tuning switch if playback started in system_resume(). - Change TASDEVICE_PAGE_REG to TASDEVICE_REG_ID in tas2781_spi_fwlib.c. - Remove calibration binary load functions as data will be loaded from EFI. v5: - Combined all modification into one patch for pass the compile. - Remove old hardware id "TIAS2781" as no production on market. - Change max page size to 256 in tas2781-spi.h. - Change book reg from 127 to GENMASK(7, 1), as one bit shift is needed. - Change register address define as one bit shift needed for offset. - Change block check sum comments to Firmware block from I2C. - Change define of (page + reg) to TASDEVICE_PAGE_REG from TASDEVICE_PGRG. - Change to lower case in defined value. - Add registers default value table in tas2781_hda_spi.c - Change rang_max to 256 * 256. - Add zero_flag_mask in regmap_config. - Change max_register to 256 * 256. - Add registers default table into structure regmap_config. - Change parameter from book number to whole register address. - Remove page 0 switch as SPI driver will do it. - Add bit(0) for read function as tas2781 will check last bit of address, to determine operation mode is read (1) or write (0). - Change switch case to if check in tas2781_hda_playback_hook(), as it may cause compile problem in clang-19 building. - Change variable declaration position. - Change order in if check. - Remove old hardware id ("TIAS2781") support. - Remove debug message in runtime suspend and resume. - Remove regmap.h include in tas2781_spi_fwlib.c. - Remove MODULE_ in fwlib as this file will work with tas2781_hda_spi.c only. v4: - Add old hardware id "TIAS2781" for compatible with old production - Add 2 devices in struct smi_node tas2781_hda, to compatible with 4 AMPs v4: - Add old hardware id "TIAS2781" for compatible with old production - Add 2 devices in struct smi_node tas2781_hda, to compatible with 4 AMPs - Move include of sound/tas2781-dsp.h to c source file tas2781_hda_spi.c, tas2781_spi_fwlib.c, as it's not needed in header file tas2781-spi.h - Use page and book number define in other micro define - Change 4000000 to (4 * HZ_PER_MHZ) - Add define for calibration variable name and size in UEFI. - Remove structure tasdevice & tasdevice_irqinfo, and move variables in to structure tasdevice_priv - Remove some unused variables in sttructure tasdevice_priv - Remove function declare of tascodec_init(), use tascodec_spi_init() - Remove function declare of tasdevice_remove() - Add array_size.h included in tas2781_hda_spi.c - Add cleanup.h included for change mutex to guard - Add units.h included - Include tas2781-dsp.h - Remove unused variables in tas2781_hda structure - Change 0xff to GENMASK(7, 0) - Change 128 to define of max page size - Change code as all variables was moved to tasdevice_priv structure - Change comments for error in book write, or page write - Remove initial of ret, and return 0 directly - Change comments for wrong typo, add space in front and end - Add check for bulk read, max size should be a page size - Change usleep_rang() to fsleep() - Change mutex_lock to guard(mutex), and remove mutex_unlock() - Change tasdevice_spi_init() to void from int as no value return required - Change second parameter to sizeof - Remove tasdevice_clamp(), use clamp() - Add compatible with old hardware id "TIAS2781" - Remove cs_gpio and spi device in tas2781_read_acpi() as use default CS - Change dev-index check, return -EINVAL if it's <= 0 - Change 0xFF to U8_MAX - Remove GPIO get for chip-select, use default from SPI device - Perform RESET in first AMP only as all AMPs share same RESET pin - return 0 directly in some simple routine to avoid variable initial - Change comments for function which was used by system - Change "ON" "OFF" to function str_on_off(...) - Change format of GUID - Add temp buffer for first efi.get_variable() - Free data if it was allocated - Change format of debug message of calibration date time print - Remove total_sz = 0, as it's not needed - Move save_calibration to after tuning_switch to avoid calibration data overwrite - Remove dev from structure tasdevice_hda, use dev in tasdevice_priv - Remove 0 from { "tas2781-hda", 0}, & {"TXNW2781", 0}, - Add old hardware id "TIAS2781" for compatible with old production - Add 2 devices in struct smi_node tas2781_hda, to compatible with 4 AMPs v3: - Move HID up to above /* Non-conforming _HID ... */ in scan.c, for avoid misunderstanding. - Move HID up to above /* Non-conforming _HID ... */ in serial-multi-instantiate.c, for avoid misunderstanding. - Change objs to y for snd-hda-scodec-tas2781-spi- in Makefile. - Change format for some define in tas2781-spi.h. - Add define for TASDEVICE_MAX_BOOK_NUM, TASDEVICE_MAX_PAGE. - Move declare of "enum calib_data {" to header file from source file. - Remove "enum device_catlog_id {" as only one platform was supported now. - Remove "struct calidata", as we will save pure calibration data only. - Remove "struct calidata", "enum device_catlog_id" in tasdevice_priv. - Add calibration_data in tasdevice_priv to save pure calibration data. - Remove declare of tasdevice_save_calibration() and tasdevice_apply_calibration(), as it will be used within same c file. - Add below header files included in tas2781_hda_spi.c: bits.h, mutex.h, property.h, time.h, types.h. - Move two micro define to header file tas2781-spi.h. - Change format of some micro define. - Change format of some structure. - Remove irq in tas2781_hda, as have it already in tasdevice_priv. - Remove some local functions declare as not necessarily. - Return error if regmap_write() failed. - Change fixed value 2 to sizeof(data). - Remove all of EXPORT_SYMBOL_GPL, as all of function was called within same module. - Remove empty line after last return in some functions. - Remove some variable initialyzation. - Remove variable sub, store acpi_subsystem_id directly. - Remove wrong comments for device index, it's must, can't be NULL. - Remove some local variables, use elements in structure directly. - Append commas in last element of an array. - Change calibration data process, didn't save all of calibration data in EFI, get in local, and save pure calibration data in tasdevice_priv. - Call tasdevice_save_calibration() from function pointer in tasdevice_priv; - Remove subid as one platform was supported only, needn't check. - Add initialyzation for local variable. - Move regmap initialyzation to before acpi read. - Call tasdevice_apply_calibration() from function pointer in tasdevice_priv; - Remove MODULE_IMPORT_NS(SND_SOC_TAS2781_FMWLIB), as all functions was performed within same module. - Update format and variables declare order. - Change format of multi conditions for if. - Remove casting which is not needed. - Change variables type to avoid casting. - Remove Unneeded parentheses. - Change if check to avoid goto. - Add {} for keep same style. - Remove some local variables, use elements in structure directly. v2: - Change depends on SPI to SPI_MASTER in sound/pci/hda/Kconfig - Add select SND_HDA_SCODEC_COMPONENT in sound/pci/hda/Kconfig - Change comp_generic_fixup() 5th parameter from "-%s:00" to "-%s:00-tas2781-hda.%d" in sound/pci/hda/patch_realtek.c - Change chain_id from ALC285_FIXUP_THINKPAD_HEADSET_JACK to ALC285_FIXUP_HP_GPIO_LED in sound/pci/hda/patch_realtek.c - Remove project name "Gemtree" - Update information in file header of tas2781-spi.h. - Remove useless micro define. - Change TASDEVICE_I2CChecksum to TASDEVICE_Checksum - Remove enum control_bus as current code support SPI only. - Remove device define as current code support TAS2781 only. - Remove spi_device **spi_devs in structure tasdevice_priv. - Remove cal_binaryname in structure tasdevice_priv. - Remove ndev in structure tasdevice_priv. - Change isacpi and isspi, replace by control_bus(I2C or SPI). - Remove void tasdevice_spi_dsp_remove(void *context). - Add acpi_device and irq in structure tas2781_hda in tas2781_hda_spi.c. - Remove parameter chn in all of registers access functions. - Add tascodec_spi_init(). - Add chip select gpio set for SPI device. - Change tasdevice_tuning_switch() to tasdevice_spi_tuning_switch(). - Change device offset from tas_priv->ndev to tas_priv->index. - Change tasdevice_dsp_remove() to tasdevice_spi_dsp_remove(). - tasdevice_prmg_load() to tasdevice_spi_prmg_load(). - Change tasdevice_config_info_remove() to tasdevice_spi_config_info_remove(). - Add one dummy byte shift when read from page 2~127, or not book 0. - Change tasdevice_spi_change_chn_book() to tasdevice_spi_switch_book() - Perform put_device(physdev) before error return. - Change calibration data id to 2781 from 2783 in EFI - Change calibration data structure name in comments. - Remove file name in tas2781_spi_fwlib.c. - Remove #include <linux/i2c.h> as it not needed in SPI mode. - Change TAB to speace in micro define in tas2781_spi_fwlib.c. - Change to up-case for DSP. - Change all of multi-line comments format, empty first line. - Change all of sizeof(struct xx) to sizeof(*xx). - Remove Explicit casting for variables compare to avoid possible fault. - Return directly without goto. - Change 1 << xx to BIT(xx). - Remove deviceNumber[] as current SPI device will support one device only. - Add memory free before return error. - Change "buf[offset]; offset += 1" to buf[offset++]. - Remove some debug information print. - Change firmware binary to single device mode. - Change all bexx_to_cpup() to get_unaligned_bexx(). - Remove ndev process as current SPI device support single device only. - Remove chn and chnend for single device support only. - Change all of registers read/write function, remove parameter chn. - Create new function for single write, burst write, delay, field write in tasdevice_process_block(). --- drivers/acpi/scan.c | 1 + .../platform/x86/serial-multi-instantiate.c | 12 + sound/pci/hda/Kconfig | 14 + sound/pci/hda/Makefile | 2 + sound/pci/hda/patch_realtek.c | 14 + sound/pci/hda/tas2781-spi.h | 148 ++ sound/pci/hda/tas2781_hda_spi.c | 1266 ++++++++++ sound/pci/hda/tas2781_spi_fwlib.c | 2101 +++++++++++++++++ 8 files changed, 3558 insertions(+) create mode 100644 sound/pci/hda/tas2781-spi.h create mode 100644 sound/pci/hda/tas2781_hda_spi.c create mode 100644 sound/pci/hda/tas2781_spi_fwlib.c diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 503773707e01..9c08c5886370 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -1760,6 +1760,7 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device) {"CSC3557", }, {"INT33FE", }, {"INT3515", }, + {"TXNW2781", }, /* Non-conforming _HID for Cirrus Logic already released */ {"CLSA0100", }, {"CLSA0101", }, diff --git a/drivers/platform/x86/serial-multi-instantiate.c b/drivers/platform/x86/serial-multi-instantiate.c index 97b9c6392230..23d46063423d 100644 --- a/drivers/platform/x86/serial-multi-instantiate.c +++ b/drivers/platform/x86/serial-multi-instantiate.c @@ -368,6 +368,17 @@ static const struct smi_node cs35l57_hda = { .bus_type = SMI_AUTO_DETECT, }; +static const struct smi_node tas2781_hda = { + .instances = { + { "tas2781-hda", IRQ_RESOURCE_AUTO, 0 }, + { "tas2781-hda", IRQ_RESOURCE_AUTO, 0 }, + { "tas2781-hda", IRQ_RESOURCE_AUTO, 0 }, + { "tas2781-hda", IRQ_RESOURCE_AUTO, 0 }, + {} + }, + .bus_type = SMI_AUTO_DETECT, +}; + /* * Note new device-ids must also be added to ignore_serial_bus_ids in * drivers/acpi/scan.c: acpi_device_enumeration_by_parent(). @@ -380,6 +391,7 @@ static const struct acpi_device_id smi_acpi_ids[] = { { "CSC3556", (unsigned long)&cs35l56_hda }, { "CSC3557", (unsigned long)&cs35l57_hda }, { "INT3515", (unsigned long)&int3515_data }, + { "TXNW2781", (unsigned long)&tas2781_hda }, /* Non-conforming _HID for Cirrus Logic already released */ { "CLSA0100", (unsigned long)&cs35l41_hda }, { "CLSA0101", (unsigned long)&cs35l41_hda }, diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig index 0da625533afc..113161618788 100644 --- a/sound/pci/hda/Kconfig +++ b/sound/pci/hda/Kconfig @@ -204,6 +204,20 @@ config SND_HDA_SCODEC_TAS2781_I2C comment "Set to Y if you want auto-loading the side codec driver" depends on SND_HDA=y && SND_HDA_SCODEC_TAS2781_I2C=m +config SND_HDA_SCODEC_TAS2781_SPI + tristate "Build TAS2781 HD-audio side codec support for SPI Bus" + depends on SPI_MASTER + depends on ACPI + depends on EFI + depends on SND_SOC + select CRC32_SARWATE + help + Say Y or M here to include TAS2781 SPI HD-audio side codec support + in snd-hda-intel driver, such as ALC287. + +comment "Set to Y if you want auto-loading the side codec driver" + depends on SND_HDA=y && SND_HDA_SCODEC_TAS2781_SPI=m + config SND_HDA_CODEC_REALTEK tristate "Build Realtek HD-audio codec support" select SND_HDA_GENERIC diff --git a/sound/pci/hda/Makefile b/sound/pci/hda/Makefile index 058ca0a289e4..39bb30803b24 100644 --- a/sound/pci/hda/Makefile +++ b/sound/pci/hda/Makefile @@ -39,6 +39,7 @@ snd-hda-scodec-cs35l56-spi-y := cs35l56_hda_spi.o snd-hda-cs-dsp-ctls-y := hda_cs_dsp_ctl.o snd-hda-scodec-component-y := hda_component.o snd-hda-scodec-tas2781-i2c-y := tas2781_hda_i2c.o +snd-hda-scodec-tas2781-spi-y := tas2781_hda_spi.o tas2781_spi_fwlib.o # common driver obj-$(CONFIG_SND_HDA) := snd-hda-codec.o @@ -70,6 +71,7 @@ obj-$(CONFIG_SND_HDA_SCODEC_CS35L56_SPI) += snd-hda-scodec-cs35l56-spi.o obj-$(CONFIG_SND_HDA_CS_DSP_CONTROLS) += snd-hda-cs-dsp-ctls.o obj-$(CONFIG_SND_HDA_SCODEC_COMPONENT) += snd-hda-scodec-component.o obj-$(CONFIG_SND_HDA_SCODEC_TAS2781_I2C) += snd-hda-scodec-tas2781-i2c.o +obj-$(CONFIG_SND_HDA_SCODEC_TAS2781_SPI) += snd-hda-scodec-tas2781-spi.o # this must be the last entry after codec drivers; # otherwise the codec patches won't be hooked before the PCI probe diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index aa76d1c88589..38f2cf148477 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6921,6 +6921,11 @@ static void tas2781_fixup_i2c(struct hda_codec *cdc, comp_generic_fixup(cdc, action, "i2c", "TIAS2781", "-%s:00", 1); } +static void tas2781_fixup_spi(struct hda_codec *cdc, const struct hda_fixup *fix, int action) +{ + comp_generic_fixup(cdc, action, "spi", "TXNW2781", "-%s:00-tas2781-hda.%d", 2); +} + static void yoga7_14arb7_fixup_i2c(struct hda_codec *cdc, const struct hda_fixup *fix, int action) { @@ -7498,6 +7503,7 @@ enum { ALC236_FIXUP_DELL_DUAL_CODECS, ALC287_FIXUP_CS35L41_I2C_2_THINKPAD_ACPI, ALC287_FIXUP_TAS2781_I2C, + ALC245_FIXUP_TAS2781_SPI_2, ALC287_FIXUP_YOGA7_14ARB7_I2C, ALC245_FIXUP_HP_MUTE_LED_COEFBIT, ALC245_FIXUP_HP_X360_MUTE_LEDS, @@ -9688,6 +9694,12 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id = ALC285_FIXUP_THINKPAD_HEADSET_JACK, }, + [ALC245_FIXUP_TAS2781_SPI_2] = { + .type = HDA_FIXUP_FUNC, + .v.func = tas2781_fixup_spi, + .chained = true, + .chain_id = ALC285_FIXUP_HP_GPIO_LED, + }, [ALC287_FIXUP_YOGA7_14ARB7_I2C] = { .type = HDA_FIXUP_FUNC, .v.func = yoga7_14arb7_fixup_i2c, @@ -10156,6 +10168,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x8b8d, "HP", ALC236_FIXUP_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x8b8f, "HP", ALC245_FIXUP_CS35L41_SPI_4_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x8b92, "HP", ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED), + SND_PCI_QUIRK(0x103c, 0x8b93, "HP Varcolac", ALC245_FIXUP_TAS2781_SPI_2), SND_PCI_QUIRK(0x103c, 0x8b96, "HP", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF), SND_PCI_QUIRK(0x103c, 0x8b97, "HP", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF), SND_PCI_QUIRK(0x103c, 0x8bb3, "HP Slim OMEN", ALC287_FIXUP_CS35L41_I2C_2), @@ -10212,6 +10225,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x8cdf, "HP SnowWhite", ALC287_FIXUP_CS35L41_I2C_2_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x8ce0, "HP SnowWhite", ALC287_FIXUP_CS35L41_I2C_2_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x8cf5, "HP ZBook Studio 16", ALC245_FIXUP_CS35L41_SPI_4_HP_GPIO_LED), + SND_PCI_QUIRK(0x103c, 0x8daa, "HP Gemtree", ALC245_FIXUP_TAS2781_SPI_2), SND_PCI_QUIRK(0x1043, 0x103e, "ASUS X540SA", ALC256_FIXUP_ASUS_MIC), SND_PCI_QUIRK(0x1043, 0x103f, "ASUS TX300", ALC282_FIXUP_ASUS_TX300), SND_PCI_QUIRK(0x1043, 0x106d, "Asus K53BE", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), diff --git a/sound/pci/hda/tas2781-spi.h b/sound/pci/hda/tas2781-spi.h new file mode 100644 index 000000000000..dd9d620d3bee --- /dev/null +++ b/sound/pci/hda/tas2781-spi.h @@ -0,0 +1,148 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +// +// ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier +// +// Copyright (C) 2024 Texas Instruments Incorporated +// https://www.ti.com +// +// The TAS2781 driver implements a flexible and configurable +// algo coefficient setting for TAS2781 chips. +// +// Author: Baojun Xu <baojun.xu(a)ti.com> +// + +#ifndef __TAS2781_SPI_H__ +#define __TAS2781_SPI_H__ + +#define TASDEVICE_RATES \ + (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | \ + SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_88200) + +#define TASDEVICE_FORMATS \ + (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE | \ + SNDRV_PCM_FMTBIT_S32_LE) + +#define TASDEVICE_MAX_BOOK_NUM 256 +#define TASDEVICE_MAX_PAGE 256 + +#define TASDEVICE_MAX_SIZE (TASDEVICE_MAX_BOOK_NUM * TASDEVICE_MAX_PAGE) + +/* PAGE Control Register (available in page0 of each book) */ +#define TASDEVICE_PAGE_SELECT 0x00 +#define TASDEVICE_BOOKCTL_PAGE 0x00 +#define TASDEVICE_BOOKCTL_REG GENMASK(7, 1) +#define TASDEVICE_BOOK_ID(reg) ((reg & GENMASK(24, 16)) >> 16) +#define TASDEVICE_PAGE_ID(reg) ((reg & GENMASK(15, 8)) >> 8) +#define TASDEVICE_REG_ID(reg) ((reg & GENMASK(7, 1)) >> 1) +#define TASDEVICE_PAGE_REG(reg) (reg & GENMASK(15, 1)) +#define TASDEVICE_REG(book, page, reg) (((book & GENMASK(7, 0)) << 16) | \ + ((page & GENMASK(7, 0)) << 8) | \ + ((reg & GENMASK(6, 0)) << 1)) + +/* Software Reset */ +#define TAS2781_REG_SWRESET TASDEVICE_REG(0x0, 0x0, 0x01) +#define TAS2781_REG_SWRESET_RESET BIT(0) + +/* Firmware block Checksum */ +#define TASDEVICE_CHECKSUM TASDEVICE_REG(0x0, 0x0, 0x7e) + +/* Volume control */ +#define TAS2781_DVC_LVL TASDEVICE_REG(0x0, 0x0, 0x1a) +#define TAS2781_AMP_LEVEL TASDEVICE_REG(0x0, 0x0, 0x03) +#define TAS2781_AMP_LEVEL_MASK GENMASK(5, 1) + +#define TASDEVICE_CMD_SING_W 0x1 +#define TASDEVICE_CMD_BURST 0x2 +#define TASDEVICE_CMD_DELAY 0x3 +#define TASDEVICE_CMD_FIELD_W 0x4 + +#define TAS2781_SPI_MAX_FREQ (4 * HZ_PER_MHZ) + +#define TASDEVICE_CRC8_POLYNOMIAL 0x4d +#define TASDEVICE_SPEAKER_CALIBRATION_SIZE 20 + +#define TASDEVICE_CALIBRATION_DATA_NAME L"CALI_DATA" +#define TASDEVICE_CALIBRATION_DATA_SIZE 256 + +enum calib_data { + R0_VAL = 0, + INV_R0, + R0LOW, + POWER, + TLIM, + CALIB_MAX +}; + +struct tasdevice_priv { + struct tasdevice_fw *cali_data_fmw; + struct tasdevice_rca rcabin; + struct tasdevice_fw *fmw; + struct gpio_desc *reset; + struct mutex codec_lock; + struct regmap *regmap; + struct device *dev; + struct tm tm; + + const char *acpi_subsystem_id; + unsigned char crc8_lkp_tbl[CRC8_TABLE_SIZE]; + unsigned char coef_binaryname[64]; + unsigned char rca_binaryname[64]; + unsigned char dev_name[32]; + + unsigned int err_code; + bool is_loading; + bool is_loaderr; + int cur_book; + int cur_prog; + int cur_conf; + int fw_state; + int index; + int irq; + void *client; + void *codec; + bool force_fwload_status; + bool playback_started; + unsigned int calibration_data[CALIB_MAX]; + + int (*fw_parse_variable_header)(struct tasdevice_priv *tas_priv, + const struct firmware *fmw, int offset); + int (*fw_parse_program_data)(struct tasdevice_priv *tas_priv, + struct tasdevice_fw *tas_fmw, + const struct firmware *fmw, int offset); + int (*fw_parse_configuration_data)(struct tasdevice_priv *tas_priv, + struct tasdevice_fw *tas_fmw, + const struct firmware *fmw, int offset); + int (*tasdevice_load_block)(struct tasdevice_priv *tas_priv, + struct tasdev_blk *block); + + int (*save_calibration)(struct tasdevice_priv *tas_priv); + void (*apply_calibration)(struct tasdevice_priv *tas_priv); +}; + +int tasdevice_spi_dev_read(struct tasdevice_priv *tas_priv, + unsigned int reg, unsigned int *value); +int tasdevice_spi_dev_write(struct tasdevice_priv *tas_priv, + unsigned int reg, unsigned int value); +int tasdevice_spi_dev_bulk_write( + struct tasdevice_priv *tas_priv, unsigned int reg, + unsigned char *p_data, unsigned int n_length); +int tasdevice_spi_dev_bulk_read(struct tasdevice_priv *tas_priv, + unsigned int reg, unsigned char *p_data, unsigned int n_length); +int tasdevice_spi_dev_update_bits(struct tasdevice_priv *tasdevice, + unsigned int reg, unsigned int mask, unsigned int value); + +void tasdevice_spi_select_cfg_blk(void *context, int conf_no, + unsigned char block_type); +void tasdevice_spi_config_info_remove(void *context); +int tasdevice_spi_dsp_parser(void *context); +int tasdevice_spi_rca_parser(void *context, const struct firmware *fmw); +void tasdevice_spi_dsp_remove(void *context); +void tasdevice_spi_calbin_remove(void *context); +int tasdevice_spi_select_tuningprm_cfg(void *context, int prm, + int cfg_no, int rca_conf_no); +int tasdevice_spi_prmg_load(void *context, int prm_no); +int tasdevice_spi_prmg_calibdata_load(void *context, int prm_no); +void tasdevice_spi_tuning_switch(void *context, int state); +int tas2781_spi_load_calibration(void *context, char *file_name, + unsigned short i); +#endif /* __TAS2781_SPI_H__ */ diff --git a/sound/pci/hda/tas2781_hda_spi.c b/sound/pci/hda/tas2781_hda_spi.c new file mode 100644 index 000000000000..e9b77f602c75 --- /dev/null +++ b/sound/pci/hda/tas2781_hda_spi.c @@ -0,0 +1,1266 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// TAS2781 HDA SPI driver +// +// Copyright 2024 Texas Instruments, Inc. +// +// Author: Baojun Xu <baojun.xu(a)ti.com> + +#include <linux/acpi.h> +#include <linux/array_size.h> +#include <linux/bits.h> +#include <linux/cleanup.h> +#include <linux/crc8.h> +#include <linux/crc32.h> +#include <linux/efi.h> +#include <linux/firmware.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/pm_runtime.h> +#include <linux/property.h> +#include <linux/regmap.h> +#include <linux/spi/spi.h> +#include <linux/time.h> +#include <linux/types.h> +#include <linux/units.h> + +#include <sound/hda_codec.h> +#include <sound/soc.h> +#include <sound/tas2781-dsp.h> +#include <sound/tlv.h> +#include <sound/tas2781-tlv.h> + +#include "tas2781-spi.h" + +#include "hda_local.h" +#include "hda_auto_parser.h" +#include "hda_component.h" +#include "hda_jack.h" +#include "hda_generic.h" + +/* + * No standard control callbacks for SNDRV_CTL_ELEM_IFACE_CARD + * Define two controls, one is Volume control callbacks, the other is + * flag setting control callbacks. + */ + +/* Volume control callbacks for tas2781 */ +#define ACARD_SINGLE_RANGE_EXT_TLV(xname, xreg, xshift, xmin, xmax, xinvert, \ + xhandler_get, xhandler_put, tlv_array) { \ + .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = (xname), \ + .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \ + SNDRV_CTL_ELEM_ACCESS_READWRITE, \ + .tlv.p = (tlv_array), \ + .info = snd_soc_info_volsw_range, \ + .get = xhandler_get, .put = xhandler_put, \ + .private_value = (unsigned long)&(struct soc_mixer_control) { \ + .reg = xreg, .rreg = xreg, \ + .shift = xshift, .rshift = xshift,\ + .min = xmin, .max = xmax, .invert = xinvert, \ + } \ +} + +/* Flag control callbacks for tas2781 */ +#define ACARD_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) { \ + .iface = SNDRV_CTL_ELEM_IFACE_CARD, \ + .name = xname, \ + .info = snd_ctl_boolean_mono_info, \ + .get = xhandler_get, \ + .put = xhandler_put, \ + .private_value = xdata, \ +} + +struct tas2781_hda { + struct tasdevice_priv *priv; + struct acpi_device *dacpi; + struct snd_kcontrol *dsp_prog_ctl; + struct snd_kcontrol *dsp_conf_ctl; + struct snd_kcontrol *snd_ctls[3]; + struct snd_kcontrol *prof_ctl; +}; + +static const struct reg_default tas2781_reg_defaults[] = { + /* Default values for ROM mode. Activated. */ + { 0x04, 0x1a }, /* AMP inactive. */ + { 0x14, 0x3a }, /* Enable both channels. */ + { 0xb8, 0x99 }, /* Enable power up on clock. */ +}; + +static const struct regmap_range_cfg tasdevice_ranges[] = { + { + .range_min = 0, + .range_max = TASDEVICE_MAX_SIZE, + .selector_reg = TASDEVICE_PAGE_SELECT, + .selector_mask = GENMASK(7, 0), + .selector_shift = 0, + .window_start = 0, + .window_len = TASDEVICE_MAX_PAGE, + }, +}; + +static const struct regmap_config tasdevice_regmap = { + .reg_bits = 8, + .val_bits = 8, + .zero_flag_mask = true, + .cache_type = REGCACHE_NONE, + .ranges = tasdevice_ranges, + .num_ranges = ARRAY_SIZE(tasdevice_ranges), + .max_register = TASDEVICE_MAX_SIZE, + .reg_defaults = tas2781_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(tas2781_reg_defaults), +}; + +static int tasdevice_spi_switch_book(struct tasdevice_priv *tas_priv, int reg) +{ + struct regmap *map = tas_priv->regmap; + int ret; + + if (tas_priv->cur_book != TASDEVICE_BOOK_ID(reg)) { + ret = regmap_write(map, TASDEVICE_BOOKCTL_REG, + TASDEVICE_BOOK_ID(reg)); + if (ret < 0) { + dev_err(tas_priv->dev, "Switch Book E=%d\n", ret); + return ret; + } + tas_priv->cur_book = TASDEVICE_BOOK_ID(reg); + } + return 0; +} + +int tasdevice_spi_dev_read(struct tasdevice_priv *tas_priv, unsigned int reg, + unsigned int *val) +{ + struct regmap *map = tas_priv->regmap; + int ret; + + ret = tasdevice_spi_switch_book(tas_priv, reg); + if (ret < 0) + return ret; + + /* + * In our TAS2781 SPI mode, if read from other book (not book 0), + * or read from page number larger than 1 in book 0, one more byte + * read is needed, and first byte is a dummy byte, need to be ignored. + */ + if ((TASDEVICE_BOOK_ID(reg) > 0) || (TASDEVICE_PAGE_ID(reg) > 1)) { + unsigned char data[2]; + + ret = regmap_bulk_read(map, TASDEVICE_PAGE_REG(reg) | 1, + data, sizeof(data)); + *val = data[1]; + } else { + ret = regmap_read(map, TASDEVICE_PAGE_REG(reg) | 1, val); + } + if (ret < 0) + dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret); + + return ret; +} + +int tasdevice_spi_dev_write(struct tasdevice_priv *tas_priv, unsigned int reg, + unsigned int value) +{ + struct regmap *map = tas_priv->regmap; + int ret; + + ret = tasdevice_spi_switch_book(tas_priv, reg); + if (ret < 0) + return ret; + + ret = regmap_write(map, TASDEVICE_PAGE_REG(reg), value); + if (ret < 0) + dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret); + + return ret; +} + +int tasdevice_spi_dev_bulk_write(struct tasdevice_priv *tas_priv, + unsigned int reg, unsigned char *data, unsigned int len) +{ + struct regmap *map = tas_priv->regmap; + int ret; + + ret = tasdevice_spi_switch_book(tas_priv, reg); + if (ret < 0) + return ret; + + ret = regmap_bulk_write(map, TASDEVICE_PAGE_REG(reg), data, len); + if (ret < 0) + dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret); + + return ret; +} + +int tasdevice_spi_dev_bulk_read(struct tasdevice_priv *tas_priv, + unsigned int reg, unsigned char *data, unsigned int len) +{ + struct regmap *map = tas_priv->regmap; + int ret; + + ret = tasdevice_spi_switch_book(tas_priv, reg); + if (ret < 0) + return ret; + + if (len > TASDEVICE_MAX_PAGE) + len = TASDEVICE_MAX_PAGE; + /* + * In our TAS2781 SPI mode, if read from other book (not book 0), + * or read from page number larger than 1 in book 0, one more byte + * read is needed, and first byte is a dummy byte, need to be ignored. + */ + if ((TASDEVICE_BOOK_ID(reg) > 0) || (TASDEVICE_PAGE_ID(reg) > 1)) { + unsigned char buf[TASDEVICE_MAX_PAGE+1]; + + ret = regmap_bulk_read(map, TASDEVICE_PAGE_REG(reg) | 1, + buf, len + 1); + memcpy(data, buf + 1, len); + } else { + ret = regmap_bulk_read(map, TASDEVICE_PAGE_REG(reg) | 1, + data, len); + } + if (ret < 0) + dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret); + + return ret; +} + +int tasdevice_spi_dev_update_bits(struct tasdevice_priv *tas_priv, + unsigned int reg, unsigned int mask, unsigned int value) +{ + struct regmap *map = tas_priv->regmap; + int ret, val; + + /* + * In our TAS2781 SPI mode, read/write was masked in last bit of + * address, it cause regmap_update_bits() not work as expected. + */ + ret = tasdevice_spi_dev_read(tas_priv, reg, &val); + if (ret < 0) { + dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret); + return ret; + } + ret = regmap_write(map, TASDEVICE_PAGE_REG(reg), + (val & ~mask) | (mask & value)); + if (ret < 0) + dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret); + + return ret; +} + +static void tas2781_spi_reset(struct tasdevice_priv *tas_dev) +{ + int ret; + + if (tas_dev->reset) { + gpiod_set_value_cansleep(tas_dev->reset, 0); + fsleep(800); + gpiod_set_value_cansleep(tas_dev->reset, 1); + } else { + ret = tasdevice_spi_dev_write(tas_dev, TAS2781_REG_SWRESET, + TAS2781_REG_SWRESET_RESET); + if (ret < 0) + dev_err(tas_dev->dev, "dev sw-reset fail, %d\n", ret); + } + fsleep(1000); +} + +static int tascodec_spi_init(struct tasdevice_priv *tas_priv, void *codec, + struct module *module, + void (*cont)(const struct firmware *fw, void *context)) +{ + int ret; + + /* + * Codec Lock Hold to ensure that codec_probe and firmware parsing and + * loading do not simultaneously execute. + */ + guard(mutex)(&tas_priv->codec_lock); + + ret = scnprintf(tas_priv->rca_binaryname, + sizeof(tas_priv->rca_binaryname), "%sRCA%d.bin", + tas_priv->dev_name, tas_priv->index); + if (ret <= 0) { + dev_err(tas_priv->dev, "rca name err:0x%08x\n", ret); + return ret; + } + crc8_populate_msb(tas_priv->crc8_lkp_tbl, TASDEVICE_CRC8_POLYNOMIAL); + tas_priv->codec = codec; + ret = request_firmware_nowait(module, FW_ACTION_UEVENT, + tas_priv->rca_binaryname, tas_priv->dev, GFP_KERNEL, tas_priv, + cont); + if (ret) + dev_err(tas_priv->dev, "request_firmware_nowait err:0x%08x\n", + ret); + + return ret; +} + +static void tasdevice_spi_init(struct tasdevice_priv *tas_priv) +{ + tas_priv->cur_prog = -1; + tas_priv->cur_conf = -1; + + tas_priv->cur_book = -1; + tas_priv->cur_prog = -1; + tas_priv->cur_conf = -1; + + mutex_init(&tas_priv->codec_lock); +} + +static int tasdevice_spi_amp_putvol(struct tasdevice_priv *tas_priv, + struct snd_ctl_elem_value *ucontrol, struct soc_mixer_control *mc) +{ + unsigned int invert = mc->invert; + unsigned char mask; + int max = mc->max; + int val, ret; + + mask = rounddown_pow_of_two(max); + mask <<= mc->shift; + val = clamp(invert ? max - ucontrol->value.integer.value[0] : + ucontrol->value.integer.value[0], 0, max); + ret = tasdevice_spi_dev_update_bits(tas_priv, + mc->reg, mask, (unsigned int)(val << mc->shift)); + if (ret) + dev_err(tas_priv->dev, "set AMP vol error in dev %d\n", + tas_priv->index); + + return ret; +} + +static int tasdevice_spi_amp_getvol(struct tasdevice_priv *tas_priv, + struct snd_ctl_elem_value *ucontrol, struct soc_mixer_control *mc) +{ + unsigned int invert = mc->invert; + unsigned char mask = 0; + int max = mc->max; + int ret, val; + + /* Read the primary device */ + ret = tasdevice_spi_dev_read(tas_priv, mc->reg, &val); + if (ret) { + dev_err(tas_priv->dev, "%s, get AMP vol error\n", __func__); + return ret; + } + + mask = rounddown_pow_of_two(max); + mask <<= mc->shift; + val = (val & mask) >> mc->shift; + val = clamp(invert ? max - val : val, 0, max); + ucontrol->value.integer.value[0] = val; + + return ret; +} + +static int tasdevice_spi_digital_putvol(struct tasdevice_priv *tas_priv, + struct snd_ctl_elem_value *ucontrol, struct soc_mixer_control *mc) +{ + unsigned int invert = mc->invert; + int max = mc->max; + int val, ret; + + val = clamp(invert ? max - ucontrol->value.integer.value[0] : + ucontrol->value.integer.value[0], 0, max); + ret = tasdevice_spi_dev_write(tas_priv, mc->reg, (unsigned int)val); + if (ret) + dev_err(tas_priv->dev, "set digital vol err in dev %d\n", + tas_priv->index); + + return ret; + +} + +static int tasdevice_spi_digital_getvol(struct tasdevice_priv *tas_priv, + struct snd_ctl_elem_value *ucontrol, struct soc_mixer_control *mc) +{ + unsigned int invert = mc->invert; + int max = mc->max; + int ret, val; + + /* Read the primary device as the whole */ + ret = tasdevice_spi_dev_read(tas_priv, mc->reg, &val); + if (ret) { + dev_err(tas_priv->dev, "%s, get digital vol err\n", __func__); + return ret; + } + + val = clamp(invert ? max - val : val, 0, max); + ucontrol->value.integer.value[0] = val; + + return ret; +} + +static int tas2781_read_acpi(struct tas2781_hda *tas_hda, const char *hid, + int id) +{ + struct tasdevice_priv *p = tas_hda->priv; + struct acpi_device *adev; + struct device *physdev; + u32 values[HDA_MAX_COMPONENTS]; + const char *property; + size_t nval; + int ret, i; + + adev = acpi_dev_get_first_match_dev(hid, NULL, -1); + if (!adev) { + dev_err(p->dev, "Failed to find ACPI device: %s\n", hid); + return -ENODEV; + } + + strscpy(p->dev_name, hid, sizeof(p->dev_name)); + tas_hda->dacpi = adev; + physdev = get_device(acpi_get_first_physical_node(adev)); + acpi_dev_put(adev); + + /* No side-effect to the playback even if subsystem_id is NULL */ + p->acpi_subsystem_id = acpi_get_subsystem_id(ACPI_HANDLE(physdev)); + + property = "ti,dev-index"; + ret = device_property_count_u32(physdev, property); + if ((ret <= 0) || (ret > ARRAY_SIZE(values))) { + ret = -EINVAL; + goto err; + } + nval = ret; + + ret = device_property_read_u32_array(physdev, property, values, nval); + if (ret) + goto err; + + p->index = U8_MAX; + for (i = 0; i < nval; i++) { + if (values[i] == id) { + p->index = i; + break; + } + } + if (p->index == U8_MAX) { + dev_dbg(p->dev, "No index found in %s\n", property); + ret = -ENODEV; + goto err; + } + + if (p->index == 0) { + /* All of amps share same RESET pin. */ + p->reset = devm_gpiod_get_index_optional(physdev, "reset", + p->index, GPIOD_OUT_LOW); + if (IS_ERR(p->reset)) { + dev_err_probe(p->dev, ret, "Failed on reset GPIO\n"); + goto err; + } + } + + put_device(physdev); + + return 0; + +err: + dev_err(p->dev, "read acpi error, ret: %d\n", ret); + put_device(physdev); + acpi_dev_put(adev); + + return ret; +} + +static void tas2781_hda_playback_hook(struct device *dev, int action) +{ + struct tas2781_hda *tas_hda = dev_get_drvdata(dev); + + if ((action == HDA_GEN_PCM_ACT_OPEN) || + (action == HDA_GEN_PCM_ACT_CLOSE)) { + if (action == HDA_GEN_PCM_ACT_OPEN) + pm_runtime_get_sync(dev); + guard(mutex)(&tas_hda->priv->codec_lock); + tasdevice_spi_tuning_switch(tas_hda->priv, 0); + if (action == HDA_GEN_PCM_ACT_CLOSE) { + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + } + } else { + dev_dbg(tas_hda->priv->dev, + "Playback action not supported: %d\n", action); + } +} + +static int tasdevice_info_profile(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = tas_priv->rcabin.ncfgs - 1; + + return 0; +} + +static int tasdevice_get_profile_id(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + + ucontrol->value.integer.value[0] = tas_priv->rcabin.profile_cfg_id; + + return 0; +} + +static int tasdevice_set_profile_id(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + int max = tas_priv->rcabin.ncfgs - 1; + int val; + + val = clamp(ucontrol->value.integer.value[0], 0, max); + if (tas_priv->rcabin.profile_cfg_id != val) { + tas_priv->rcabin.profile_cfg_id = val; + return 1; + } + + return 0; +} + +static int tasdevice_info_programs(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = tas_priv->fmw->nr_programs - 1; + + return 0; +} + +static int tasdevice_info_config(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = tas_priv->fmw->nr_configurations - 1; + + return 0; +} + +static int tasdevice_program_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + + ucontrol->value.integer.value[0] = tas_priv->cur_prog; + + return 0; +} + +static int tasdevice_program_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + int nr_program = ucontrol->value.integer.value[0]; + int max = tas_priv->fmw->nr_programs - 1; + int val; + + val = clamp(nr_program, 0, max); + + if (tas_priv->cur_prog != val) { + tas_priv->cur_prog = val; + return 1; + } + + return 0; +} + +static int tasdevice_config_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + + ucontrol->value.integer.value[0] = tas_priv->cur_conf; + + return 0; +} + +static int tasdevice_config_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + int max = tas_priv->fmw->nr_configurations - 1; + int val; + + val = clamp(ucontrol->value.integer.value[0], 0, max); + + if (tas_priv->cur_conf != val) { + tas_priv->cur_conf = val; + return 1; + } + + return 0; +} + +/* + * tas2781_digital_getvol - get the volum control + * @kcontrol: control pointer + * @ucontrol: User data + * + * Customer Kcontrol for tas2781 is primarily for regmap booking, paging + * depends on internal regmap mechanism. + * tas2781 contains book and page two-level register map, especially + * book switching will set the register BXXP00R7F, after switching to the + * correct book, then leverage the mechanism for paging to access the + * register. + * + * Return 0 if succeeded. + */ +static int tas2781_digital_getvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + + return tasdevice_spi_digital_getvol(tas_priv, ucontrol, mc); +} + +static int tas2781_amp_getvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + + return tasdevice_spi_amp_getvol(tas_priv, ucontrol, mc); +} + +static int tas2781_digital_putvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + + /* The check of the given value is in tasdevice_digital_putvol. */ + return tasdevice_spi_digital_putvol(tas_priv, ucontrol, mc); +} + +static int tas2781_amp_putvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + + /* The check of the given value is in tasdevice_amp_putvol. */ + return tasdevice_spi_amp_putvol(tas_priv, ucontrol, mc); +} + +static int tas2781_force_fwload_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + + ucontrol->value.integer.value[0] = (int)tas_priv->force_fwload_status; + dev_dbg(tas_priv->dev, "%s : Force FWload %s\n", __func__, + str_on_off(tas_priv->force_fwload_status)); + + return 0; +} + +static int tas2781_force_fwload_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + bool change, val = (bool)ucontrol->value.integer.value[0]; + + if (tas_priv->force_fwload_status == val) { + change = false; + } else { + change = true; + tas_priv->force_fwload_status = val; + } + dev_dbg(tas_priv->dev, "%s : Force FWload %s\n", __func__, + str_on_off(tas_priv->force_fwload_status)); + + return change; +} + +static const struct snd_kcontrol_new tas2781_snd_controls[] = { + ACARD_SINGLE_RANGE_EXT_TLV("Speaker Analog Gain 0", TAS2781_AMP_LEVEL, + 1, 0, 20, 0, tas2781_amp_getvol, + tas2781_amp_putvol, amp_vol_tlv), + ACARD_SINGLE_RANGE_EXT_TLV("Speaker Digital Gain 0", TAS2781_DVC_LVL, + 0, 0, 200, 1, tas2781_digital_getvol, + tas2781_digital_putvol, dvc_tlv), + ACARD_SINGLE_BOOL_EXT("Speaker Force Firmware Load 0", 0, + tas2781_force_fwload_get, tas2781_force_fwload_put), + ACARD_SINGLE_RANGE_EXT_TLV("Speaker Analog Gain 1", TAS2781_AMP_LEVEL, + 1, 0, 20, 0, tas2781_amp_getvol, + tas2781_amp_putvol, amp_vol_tlv), + ACARD_SINGLE_RANGE_EXT_TLV("Speaker Digital Gain 1", TAS2781_DVC_LVL, + 0, 0, 200, 1, tas2781_digital_getvol, + tas2781_digital_putvol, dvc_tlv), + ACARD_SINGLE_BOOL_EXT("Speaker Force Firmware Load 1", 0, + tas2781_force_fwload_get, tas2781_force_fwload_put), +}; + +static const struct snd_kcontrol_new tas2781_prof_ctrl[] = { +{ + .name = "Speaker Profile Id - 0", + .iface = SNDRV_CTL_ELEM_IFACE_CARD, + .info = tasdevice_info_profile, + .get = tasdevice_get_profile_id, + .put = tasdevice_set_profile_id, +}, +{ + .name = "Speaker Profile Id - 1", + .iface = SNDRV_CTL_ELEM_IFACE_CARD, + .info = tasdevice_info_profile, + .get = tasdevice_get_profile_id, + .put = tasdevice_set_profile_id, +}, +}; +static const struct snd_kcontrol_new tas2781_dsp_prog_ctrl[] = { +{ + .name = "Speaker Program Id 0", + .iface = SNDRV_CTL_ELEM_IFACE_CARD, + .info = tasdevice_info_programs, + .get = tasdevice_program_get, + .put = tasdevice_program_put, +}, +{ + .name = "Speaker Program Id 1", + .iface = SNDRV_CTL_ELEM_IFACE_CARD, + .info = tasdevice_info_programs, + .get = tasdevice_program_get, + .put = tasdevice_program_put, +}, +}; + +static const struct snd_kcontrol_new tas2781_dsp_conf_ctrl[] = { +{ + .name = "Speaker Config Id 0", + .iface = SNDRV_CTL_ELEM_IFACE_CARD, + .info = tasdevice_info_config, + .get = tasdevice_config_get, + .put = tasdevice_config_put, +}, +{ + .name = "Speaker Config Id 1", + .iface = SNDRV_CTL_ELEM_IFACE_CARD, + .info = tasdevice_info_config, + .get = tasdevice_config_get, + .put = tasdevice_config_put, +}, +}; + +static void tas2781_apply_calib(struct tasdevice_priv *tas_priv) +{ + static const unsigned int cali_array[CALIB_MAX] = { + TASDEVICE_REG(0, 0x17, 0x74), + TASDEVICE_REG(0, 0x18, 0x0c), + TASDEVICE_REG(0, 0x18, 0x14), + TASDEVICE_REG(0, 0x13, 0x70), + TASDEVICE_REG(0, 0x18, 0x7c), + }; + int j, rc; + + /* + * If no calibration data exist in tasdevice_priv *tas_priv, + * calibration apply will be ignored, and use default values + * in firmware binary, which was loaded during firmware download. + */ + if (tas_priv->calibration_data[0] == 0) + return; + /* + * Calibration data was saved in tasdevice_priv *tas_priv as: + * unsigned int calibration_data[CALIB_MAX]; + * and every data (in 4 bytes) will be saved in register which in + * book 0, and page number in page_array[], offset was saved in + * rgno_array[]. + */ + for (j = 0; j < CALIB_MAX; j++) { + rc = tasdevice_spi_dev_bulk_write(tas_priv, cali_array[j], + (unsigned char *)&tas_priv->calibration_data[j], 4); + if (rc < 0) + dev_err(tas_priv->dev, + "chn %d calib %d bulk_wr err = %d\n", + tas_priv->index, j, rc); + } +} + +/* + * Update the calibration data, including speaker impedance, f0, etc, + * into algo. Calibrate data is done by manufacturer in the factory. + * These data are used by Algo for calculating the speaker temperature, + * speaker membrane excursion and f0 in real time during playback. + * Calibration data format in EFI is V2, since 2024. + */ +static int tas2781_save_calibration(struct tasdevice_priv *tas_priv) +{ + /* + * GUID was used for data access in BIOS, it was provided by board + * manufactory, like HP: "{02f9af02-7734-4233-b43d-93fe5aa35db3}" + */ + efi_guid_t efi_guid = + EFI_GUID(0x02f9af02, 0x7734, 0x4233, + 0xb4, 0x3d, 0x93, 0xfe, 0x5a, 0xa3, 0x5d, 0xb3); + static efi_char16_t efi_name[] = TASDEVICE_CALIBRATION_DATA_NAME; + unsigned char data[TASDEVICE_CALIBRATION_DATA_SIZE]; + struct tm *tm = &tas_priv->tm; + unsigned long total_sz = 0; + unsigned int attr, crc; + unsigned int *tmp_val; + efi_status_t status; + + tas_priv->calibration_data[0] = 0; + status = efi.get_variable(efi_name, &efi_guid, &attr, &total_sz, + data); + if (status == EFI_BUFFER_TOO_SMALL) { + if (total_sz > TASDEVICE_CALIBRATION_DATA_SIZE) + return -ENOMEM; + /* Get variable contents into buffer */ + status = efi.get_variable(efi_name, &efi_guid, &attr, + &total_sz, data); + } + if (status != EFI_SUCCESS) + return -EINVAL; + + tmp_val = (unsigned int *)data; + if (tmp_val[0] == 2781) { + /* + * New features were added in calibrated Data V2: + * 1. Added some the fields to store the link_id and + * uniqie_id for multi-link solutions + * 2. Support flexible number of devices instead of + * fixed one in V1. + * Layout of calibrated data V2 in UEFI(total 256 bytes): + * ChipID (2781, 4 bytes) + * Device-Sum (4 bytes) + * TimeStamp of Calibration (4 bytes) + * for (i = 0; i < Device-Sum; i++) { + * Device #i index_info () { + * SDW link id (2bytes) + * SDW unique_id (2bytes) + * } + * Calibrated Data of Device #i (20 bytes) + * } + * CRC (4 bytes) + * Reserved (the rest) + */ + crc = crc32(~0, data, 3 + tmp_val[0] * 6) ^ ~0; + dev_dbg(tas_priv->dev, "cali crc 0x%08x PK tmp_val 0x%08x\n", + crc, tmp_val[3 + tmp_val[0] * 6]); + + if (crc == tmp_val[3 + tmp_val[0] * 6]) { + time64_to_tm(tmp_val[2], 0, tm); + dev_dbg(tas_priv->dev, "Calibration date %pt.\n", tm); + for (int i = 0; i < CALIB_MAX; i++) + tas_priv->calibration_data[i] = + tmp_val[3 + tas_priv->index * 6 + i]; + tas_priv->apply_calibration(tas_priv); + } + } else { + /* + * Calibration data is in V1 format. + * struct cali_data { + * char cali_data[20]; + * } + * + * struct { + * struct cali_data cali_data[4]; + * int TimeStamp of Calibration (4 bytes) + * int CRC (4 bytes) + * } ueft; + */ + crc = crc32(~0, data, 84) ^ ~0; + dev_dbg(tas_priv->dev, "cali crc 0x%08x PK tmp_val 0x%08x\n", + crc, tmp_val[21]); + + if (crc == tmp_val[21]) { + time64_to_tm(tmp_val[20], 0, tm); + dev_dbg(tas_priv->dev, "Calibration date %pt.\n", tm); + for (int i = 0; i < CALIB_MAX; i++) + tas_priv->calibration_data[i] = + tmp_val[tas_priv->index * 5 + i]; + tas_priv->apply_calibration(tas_priv); + } + } + + return 0; +} + +static void tas2781_hda_remove_controls(struct tas2781_hda *tas_hda) +{ + struct hda_codec *codec = tas_hda->priv->codec; + + if (tas_hda->dsp_prog_ctl) + snd_ctl_remove(codec->card, tas_hda->dsp_prog_ctl); + + if (tas_hda->dsp_conf_ctl) + snd_ctl_remove(codec->card, tas_hda->dsp_conf_ctl); + + for (int i = ARRAY_SIZE(tas_hda->snd_ctls) - 1; i >= 0; i--) + if (tas_hda->snd_ctls[i]) + snd_ctl_remove(codec->card, tas_hda->snd_ctls[i]); + + if (tas_hda->prof_ctl) + snd_ctl_remove(codec->card, tas_hda->prof_ctl); +} + +static void tasdev_fw_ready(const struct firmware *fmw, void *context) +{ + struct tasdevice_priv *tas_priv = context; + struct tas2781_hda *tas_hda = dev_get_drvdata(tas_priv->dev); + struct hda_codec *codec = tas_priv->codec; + int i, j, ret; + + pm_runtime_get_sync(tas_priv->dev); + guard(mutex)(&tas_priv->codec_lock); + + ret = tasdevice_spi_rca_parser(tas_priv, fmw); + if (ret) + goto out; + + /* Add control one time only. */ + tas_hda->prof_ctl = snd_ctl_new1(&tas2781_prof_ctrl[tas_priv->index], + tas_priv); + ret = snd_ctl_add(codec->card, tas_hda->prof_ctl); + if (ret) { + dev_err(tas_priv->dev, "Failed to add KControl %s = %d\n", + tas2781_prof_ctrl[tas_priv->index].name, ret); + goto out; + } + j = tas_priv->index * 3; + for (i = 0; i < ARRAY_SIZE(tas2781_snd_controls)/2; i++) { + tas_hda->snd_ctls[i] = + snd_ctl_new1(&tas2781_snd_controls[i + j], tas_priv); + ret = snd_ctl_add(codec->card, tas_hda->snd_ctls[i]); + if (ret) { + dev_err(tas_priv->dev, + "Failed to add snd control %s = %d\n", + tas2781_snd_controls[i + j].name, ret); + goto out; + } + } + + tasdevice_spi_dsp_remove(tas_priv); + + tas_priv->fw_state = TASDEVICE_DSP_FW_PENDING; + scnprintf(tas_priv->coef_binaryname, 64, "TAS2XXX%08X-%01d.bin", + codec->core.subsystem_id, tas_priv->index); + ret = tasdevice_spi_dsp_parser(tas_priv); + if (ret) { + dev_err(tas_priv->dev, "dspfw load %s error\n", + tas_priv->coef_binaryname); + tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; + goto out; + } + + /* Add control one time only. */ + tas_hda->dsp_prog_ctl = + snd_ctl_new1(&tas2781_dsp_prog_ctrl[tas_priv->index], + tas_priv); + ret = snd_ctl_add(codec->card, tas_hda->dsp_prog_ctl); + if (ret) { + dev_err(tas_priv->dev, + "Failed to add KControl %s = %d\n", + tas2781_dsp_prog_ctrl[tas_priv->index].name, ret); + goto out; + } + + tas_hda->dsp_conf_ctl = snd_ctl_new1( + &tas2781_dsp_conf_ctrl[tas_priv->index], tas_priv); + ret = snd_ctl_add(codec->card, tas_hda->dsp_conf_ctl); + if (ret) { + dev_err(tas_priv->dev, "Failed to add KControl %s = %d\n", + tas2781_dsp_conf_ctrl[tas_priv->index].name, ret); + goto out; + } + + tas_priv->fw_state = TASDEVICE_DSP_FW_ALL_OK; + tasdevice_spi_prmg_load(tas_priv, 0); + if (tas_priv->fmw->nr_programs > 0) + tas_priv->cur_prog = 0; + if (tas_priv->fmw->nr_configurations > 0) + tas_priv->cur_conf = 0; + + tasdevice_spi_tuning_switch(tas_hda->priv, 0); + + /* + * If calibrated data occurs error, dsp will still works with default + * calibrated data inside algo. + */ + tas_priv->save_calibration(tas_priv); + +out: + if (fmw) + release_firmware(fmw); + pm_runtime_mark_last_busy(tas_hda->priv->dev); + pm_runtime_put_autosuspend(tas_hda->priv->dev); +} + +static int tas2781_hda_bind(struct device *dev, struct device *master, + void *master_data) +{ + struct tas2781_hda *tas_hda = dev_get_drvdata(dev); + struct hda_component *comps = master_data; + struct hda_codec *codec; + int ret; + + if (tas_hda->priv->index < 0 || + tas_hda->priv->index >= HDA_MAX_COMPONENTS || + (!comps)) + return -EINVAL; + + comps = &comps[tas_hda->priv->index]; + if (comps->dev) + return -EBUSY; + + codec = comps->codec; + + pm_runtime_get_sync(dev); + + comps->dev = dev; + + strscpy(comps->name, dev_name(dev), sizeof(comps->name)); + + ret = tascodec_spi_init(tas_hda->priv, codec, THIS_MODULE, + tasdev_fw_ready); + if (!ret) + comps->playback_hook = tas2781_hda_playback_hook; + + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + + return ret; +} + +static void tas2781_hda_unbind(struct device *dev, struct device *master, + void *master_data) +{ + struct tas2781_hda *tas_hda = dev_get_drvdata(dev); + struct hda_component *comps = master_data; + + comps = &comps[tas_hda->priv->index]; + + if (comps->dev == dev) { + comps->dev = NULL; + memset(comps->name, 0, sizeof(comps->name)); + comps->playback_hook = NULL; + } + + tas2781_hda_remove_controls(tas_hda); + + tasdevice_spi_config_info_remove(tas_hda->priv); + tasdevice_spi_dsp_remove(tas_hda->priv); + + tas_hda->priv->fw_state = TASDEVICE_DSP_FW_PENDING; +} + +static const struct component_ops tas2781_hda_comp_ops = { + .bind = tas2781_hda_bind, + .unbind = tas2781_hda_unbind, +}; + +static void tas2781_hda_remove(struct device *dev) +{ + struct tas2781_hda *tas_hda = dev_get_drvdata(dev); + + pm_runtime_get_sync(tas_hda->priv->dev); + pm_runtime_disable(tas_hda->priv->dev); + + component_del(tas_hda->priv->dev, &tas2781_hda_comp_ops); + + pm_runtime_put_noidle(tas_hda->priv->dev); + + mutex_destroy(&tas_hda->priv->codec_lock); +} + +static int tas2781_hda_spi_probe(struct spi_device *spi) +{ + struct tasdevice_priv *tas_priv; + struct tas2781_hda *tas_hda; + const char *device_name; + int ret = 0; + + tas_hda = devm_kzalloc(&spi->dev, sizeof(*tas_hda), GFP_KERNEL); + if (!tas_hda) + return -ENOMEM; + + spi->max_speed_hz = TAS2781_SPI_MAX_FREQ; + + tas_priv = devm_kzalloc(&spi->dev, sizeof(*tas_priv), GFP_KERNEL); + if (!tas_priv) + goto err; + tas_priv->dev = &spi->dev; + tas_hda->priv = tas_priv; + tas_priv->regmap = devm_regmap_init_spi(spi, &tasdevice_regmap); + if (IS_ERR(tas_priv->regmap)) { + ret = PTR_ERR(tas_priv->regmap); + dev_err(tas_priv->dev, "Failed to allocate regmap: %d\n", + ret); + goto err; + } + if (strstr(dev_name(&spi->dev), "TXNW2781")) { + device_name = "TXNW2781"; + tas_priv->save_calibration = tas2781_save_calibration; + tas_priv->apply_calibration = tas2781_apply_calib; + } else { + goto err; + } + + tas_priv->irq = spi->irq; + dev_set_drvdata(&spi->dev, tas_hda); + ret = tas2781_read_acpi(tas_hda, device_name, + spi_get_chipselect(spi, 0)); + if (ret) + return dev_err_probe(tas_priv->dev, ret, + "Platform not supported\n"); + + tasdevice_spi_init(tas_priv); + + pm_runtime_set_autosuspend_delay(tas_priv->dev, 3000); + pm_runtime_use_autosuspend(tas_priv->dev); + pm_runtime_mark_last_busy(tas_priv->dev); + pm_runtime_set_active(tas_priv->dev); + pm_runtime_get_noresume(tas_priv->dev); + pm_runtime_enable(tas_priv->dev); + + pm_runtime_put_autosuspend(tas_priv->dev); + + tas2781_spi_reset(tas_priv); + + ret = component_add(tas_priv->dev, &tas2781_hda_comp_ops); + if (ret) { + dev_err(tas_priv->dev, "Register component failed: %d\n", ret); + pm_runtime_disable(tas_priv->dev); + } + +err: + if (ret) + tas2781_hda_remove(&spi->dev); + + return ret; +} + +static void tas2781_hda_spi_remove(struct spi_device *spi) +{ + tas2781_hda_remove(&spi->dev); +} + +static int tas2781_runtime_suspend(struct device *dev) +{ + struct tas2781_hda *tas_hda = dev_get_drvdata(dev); + + guard(mutex)(&tas_hda->priv->codec_lock); + + if (tas_hda->priv->playback_started) { + tasdevice_spi_tuning_switch(tas_hda->priv, 1); + tas_hda->priv->playback_started = false; + } + + tas_hda->priv->cur_book = -1; + tas_hda->priv->cur_conf = -1; + + return 0; +} + +static int tas2781_runtime_resume(struct device *dev) +{ + struct tas2781_hda *tas_hda = dev_get_drvdata(dev); + + guard(mutex)(&tas_hda->priv->codec_lock); + + tasdevice_spi_prmg_load(tas_hda->priv, tas_hda->priv->cur_prog); + + tasdevice_spi_tuning_switch(tas_hda->priv, 0); + + tas_hda->priv->apply_calibration(tas_hda->priv); + + return 0; +} + +static int tas2781_system_suspend(struct device *dev) +{ + struct tas2781_hda *tas_hda = dev_get_drvdata(dev); + int ret; + + ret = pm_runtime_force_suspend(dev); + if (ret) + return ret; + + /* Shutdown chip before system suspend */ + tasdevice_spi_tuning_switch(tas_hda->priv, 1); + + /* + * Reset GPIO may be shared, so cannot reset here. + * However beyond this point, amps may be powered down. + */ + return 0; +} + +static int tas2781_system_resume(struct device *dev) +{ + struct tas2781_hda *tas_hda = dev_get_drvdata(dev); + int ret; + + ret = pm_runtime_force_resume(dev); + if (ret) + return ret; + + guard(mutex)(&tas_hda->priv->codec_lock); + + tas_hda->priv->cur_book = -1; + tas_hda->priv->cur_conf = -1; + + tas2781_spi_reset(tas_hda->priv); + tasdevice_spi_prmg_load(tas_hda->priv, tas_hda->priv->cur_prog); + + if (tas_hda->priv->playback_started) + tasdevice_spi_tuning_switch(tas_hda->priv, 0); + + /* + * If calibrated data occurs error, dsp will still work with default + * calibrated data inside algo. + */ + tas_hda->priv->apply_calibration(tas_hda->priv); + + return 0; +} + +static const struct dev_pm_ops tas2781_hda_pm_ops = { + RUNTIME_PM_OPS(tas2781_runtime_suspend, tas2781_runtime_resume, NULL) + SYSTEM_SLEEP_PM_OPS(tas2781_system_suspend, tas2781_system_resume) +}; + +static const struct spi_device_id tas2781_hda_spi_id[] = { + { "tas2781-hda", }, + {} +}; + +static const struct acpi_device_id tas2781_acpi_hda_match[] = { + {"TXNW2781", }, + {} +}; +MODULE_DEVICE_TABLE(acpi, tas2781_acpi_hda_match); + +static struct spi_driver tas2781_hda_spi_driver = { + .driver = { + .name = "tas2781-hda", + .acpi_match_table = tas2781_acpi_hda_match, + .pm = &tas2781_hda_pm_ops, + }, + .id_table = tas2781_hda_spi_id, + .probe = tas2781_hda_spi_probe, + .remove = tas2781_hda_spi_remove, +}; +module_spi_driver(tas2781_hda_spi_driver); + +MODULE_DESCRIPTION("TAS2781 HDA SPI Driver"); +MODULE_AUTHOR("Baojun, Xu, <baojun.xug(a)ti.com>"); +MODULE_LICENSE("GPL"); diff --git a/sound/pci/hda/tas2781_spi_fwlib.c b/sound/pci/hda/tas2781_spi_fwlib.c new file mode 100644 index 000000000000..6e6a12df56e2 --- /dev/null +++ b/sound/pci/hda/tas2781_spi_fwlib.c @@ -0,0 +1,2101 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// TAS2781 HDA SPI driver +// +// Copyright 2024 Texas Instruments, Inc. +// +// Author: Baojun Xu <baojun.xu(a)ti.com> + +#include <asm/unaligned.h> +#include <linux/crc8.h> +#include <linux/firmware.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/tas2781-dsp.h> +#include <sound/tlv.h> + +#include "tas2781-spi.h" + +#define OFFSET_ERROR_BIT BIT(31) + +#define ERROR_PRAM_CRCCHK 0x0000000 +#define ERROR_YRAM_CRCCHK 0x0000001 +#define PPC_DRIVER_CRCCHK 0x00000200 + +#define TAS2781_SA_COEFF_SWAP_REG TASDEVICE_REG(0, 0x35, 0x2c) +#define TAS2781_YRAM_BOOK1 140 +#define TAS2781_YRAM1_PAGE 42 +#define TAS2781_YRAM1_START_REG 88 + +#define TAS2781_YRAM2_START_PAGE 43 +#define TAS2781_YRAM2_END_PAGE 49 +#define TAS2781_YRAM2_START_REG 8 +#define TAS2781_YRAM2_END_REG 127 + +#define TAS2781_YRAM3_PAGE 50 +#define TAS2781_YRAM3_START_REG 8 +#define TAS2781_YRAM3_END_REG 27 + +/* should not include B0_P53_R44-R47 */ +#define TAS2781_YRAM_BOOK2 0 +#define TAS2781_YRAM4_START_PAGE 50 +#define TAS2781_YRAM4_END_PAGE 60 + +#define TAS2781_YRAM5_PAGE 61 +#define TAS2781_YRAM5_START_REG TAS2781_YRAM3_START_REG +#define TAS2781_YRAM5_END_REG TAS2781_YRAM3_END_REG + +#define TASDEVICE_MAXPROGRAM_NUM_KERNEL 5 +#define TASDEVICE_MAXCONFIG_NUM_KERNEL_MULTIPLE_AMPS 64 +#define TASDEVICE_MAXCONFIG_NUM_KERNEL 10 +#define MAIN_ALL_DEVICES_1X 0x01 +#define MAIN_DEVICE_A_1X 0x02 +#define MAIN_DEVICE_B_1X 0x03 +#define MAIN_DEVICE_C_1X 0x04 +#define MAIN_DEVICE_D_1X 0x05 +#define COEFF_DEVICE_A_1X 0x12 +#define COEFF_DEVICE_B_1X 0x13 +#define COEFF_DEVICE_C_1X 0x14 +#define COEFF_DEVICE_D_1X 0x15 +#define PRE_DEVICE_A_1X 0x22 +#define PRE_DEVICE_B_1X 0x23 +#define PRE_DEVICE_C_1X 0x24 +#define PRE_DEVICE_D_1X 0x25 +#define PRE_SOFTWARE_RESET_DEVICE_A 0x41 +#define PRE_SOFTWARE_RESET_DEVICE_B 0x42 +#define PRE_SOFTWARE_RESET_DEVICE_C 0x43 +#define PRE_SOFTWARE_RESET_DEVICE_D 0x44 +#define POST_SOFTWARE_RESET_DEVICE_A 0x45 +#define POST_SOFTWARE_RESET_DEVICE_B 0x46 +#define POST_SOFTWARE_RESET_DEVICE_C 0x47 +#define POST_SOFTWARE_RESET_DEVICE_D 0x48 + +struct tas_crc { + unsigned char offset; + unsigned char len; +}; + +struct blktyp_devidx_map { + unsigned char blktyp; + unsigned char dev_idx; +}; + +/* fixed m68k compiling issue: mapping table can save code field */ +static const struct blktyp_devidx_map ppc3_tas2781_mapping_table[] = { + { MAIN_ALL_DEVICES_1X, 0x80 }, + { MAIN_DEVICE_A_1X, 0x81 }, + { COEFF_DEVICE_A_1X, 0xC1 }, + { PRE_DEVICE_A_1X, 0xC1 }, + { PRE_SOFTWARE_RESET_DEVICE_A, 0xC1 }, + { POST_SOFTWARE_RESET_DEVICE_A, 0xC1 }, + { MAIN_DEVICE_B_1X, 0x82 }, + { COEFF_DEVICE_B_1X, 0xC2 }, + { PRE_DEVICE_B_1X, 0xC2 }, + { PRE_SOFTWARE_RESET_DEVICE_B, 0xC2 }, + { POST_SOFTWARE_RESET_DEVICE_B, 0xC2 }, + { MAIN_DEVICE_C_1X, 0x83 }, + { COEFF_DEVICE_C_1X, 0xC3 }, + { PRE_DEVICE_C_1X, 0xC3 }, + { PRE_SOFTWARE_RESET_DEVICE_C, 0xC3 }, + { POST_SOFTWARE_RESET_DEVICE_C, 0xC3 }, + { MAIN_DEVICE_D_1X, 0x84 }, + { COEFF_DEVICE_D_1X, 0xC4 }, + { PRE_DEVICE_D_1X, 0xC4 }, + { PRE_SOFTWARE_RESET_DEVICE_D, 0xC4 }, + { POST_SOFTWARE_RESET_DEVICE_D, 0xC4 }, +}; + +static const struct blktyp_devidx_map ppc3_mapping_table[] = { + { MAIN_ALL_DEVICES_1X, 0x80 }, + { MAIN_DEVICE_A_1X, 0x81 }, + { COEFF_DEVICE_A_1X, 0xC1 }, + { PRE_DEVICE_A_1X, 0xC1 }, + { MAIN_DEVICE_B_1X, 0x82 }, + { COEFF_DEVICE_B_1X, 0xC2 }, + { PRE_DEVICE_B_1X, 0xC2 }, + { MAIN_DEVICE_C_1X, 0x83 }, + { COEFF_DEVICE_C_1X, 0xC3 }, + { PRE_DEVICE_C_1X, 0xC3 }, + { MAIN_DEVICE_D_1X, 0x84 }, + { COEFF_DEVICE_D_1X, 0xC4 }, + { PRE_DEVICE_D_1X, 0xC4 }, +}; + +static const struct blktyp_devidx_map non_ppc3_mapping_table[] = { + { MAIN_ALL_DEVICES, 0x80 }, + { MAIN_DEVICE_A, 0x81 }, + { COEFF_DEVICE_A, 0xC1 }, + { PRE_DEVICE_A, 0xC1 }, + { MAIN_DEVICE_B, 0x82 }, + { COEFF_DEVICE_B, 0xC2 }, + { PRE_DEVICE_B, 0xC2 }, + { MAIN_DEVICE_C, 0x83 }, + { COEFF_DEVICE_C, 0xC3 }, + { PRE_DEVICE_C, 0xC3 }, + { MAIN_DEVICE_D, 0x84 }, + { COEFF_DEVICE_D, 0xC4 }, + { PRE_DEVICE_D, 0xC4 }, +}; + +static struct tasdevice_config_info *tasdevice_add_config( + struct tasdevice_priv *tas_priv, unsigned char *config_data, + unsigned int config_size, int *status) +{ + struct tasdevice_config_info *cfg_info; + struct tasdev_blk_data **bk_da; + unsigned int config_offset = 0; + unsigned int i; + + /* + * In most projects are many audio cases, such as music, handfree, + * receiver, games, audio-to-haptics, PMIC record, bypass mode, + * portrait, landscape, etc. Even in multiple audios, one or + * two of the chips will work for the special case, such as + * ultrasonic application. In order to support these variable-numbers + * of audio cases, flexible configs have been introduced in the + * DSP firmware. + */ + cfg_info = kzalloc(sizeof(*cfg_info), GFP_KERNEL); + if (!cfg_info) { + *status = -ENOMEM; + return NULL; + } + + if (tas_priv->rcabin.fw_hdr.binary_version_num >= 0x105) { + if ((config_offset + 64) > config_size) { + *status = -EINVAL; + dev_err(tas_priv->dev, "add conf: Out of boundary\n"); + goto out; + } + config_offset += 64; + } + + if ((config_offset + 4) > config_size) { + *status = -EINVAL; + dev_err(tas_priv->dev, "add config: Out of boundary\n"); + goto out; + } + + /* + * convert data[offset], data[offset + 1], data[offset + 2] and + * data[offset + 3] into host + */ + cfg_info->nblocks = get_unaligned_be32(&config_data[config_offset]); + config_offset += 4; + + /* + * Several kinds of dsp/algorithm firmwares can run on tas2781, + * the number and size of blk are not fixed and different among + * these firmwares. + */ + bk_da = cfg_info->blk_data = kcalloc(cfg_info->nblocks, + sizeof(*bk_da), GFP_KERNEL); + if (!bk_da) { + *status = -ENOMEM; + goto out; + } + cfg_info->real_nblocks = 0; + for (i = 0; i < cfg_info->nblocks; i++) { + if (config_offset + 12 > config_size) { + *status = -EINVAL; + dev_err(tas_priv->dev, + "%s: Out of boundary: i = %d nblocks = %u!\n", + __func__, i, cfg_info->nblocks); + goto out1; + } + bk_da[i] = kzalloc(sizeof(*bk_da[i]), GFP_KERNEL); + if (!bk_da[i]) { + *status = -ENOMEM; + goto out1; + } + + bk_da[i]->dev_idx = config_data[config_offset]; + config_offset++; + + bk_da[i]->block_type = config_data[config_offset]; + config_offset++; + + bk_da[i]->yram_checksum = + get_unaligned_be16(&config_data[config_offset]); + config_offset += 2; + bk_da[i]->block_size = + get_unaligned_be32(&config_data[config_offset]); + config_offset += 4; + + bk_da[i]->n_subblks = + get_unaligned_be32(&config_data[config_offset]); + + config_offset += 4; + + if (config_offset + bk_da[i]->block_size > config_size) { + *status = -EINVAL; + dev_err(tas_priv->dev, + "%s: Out of boundary: i = %d blks = %u!\n", + __func__, i, cfg_info->nblocks); + goto out1; + } + /* instead of kzalloc+memcpy */ + bk_da[i]->regdata = kmemdup(&config_data[config_offset], + bk_da[i]->block_size, GFP_KERNEL); + if (!bk_da[i]->regdata) { + *status = -ENOMEM; + i++; + goto out1; + } + + config_offset += bk_da[i]->block_size; + cfg_info->real_nblocks += 1; + } + + return cfg_info; +out1: + for (int j = 0; j < i; j++) + kfree(bk_da[j]); + kfree(bk_da); +out: + kfree(cfg_info); + return NULL; +} + +int tasdevice_spi_rca_parser(void *context, const struct firmware *fmw) +{ + struct tasdevice_priv *tas_priv = context; + struct tasdevice_config_info **cfg_info; + struct tasdevice_rca_hdr *fw_hdr; + struct tasdevice_rca *rca; + unsigned int total_config_sz = 0; + int offset = 0, ret = 0, i; + unsigned char *buf; + + rca = &(tas_priv->rcabin); + fw_hdr = &(rca->fw_hdr); + if (!fmw || !fmw->data) { + dev_err(tas_priv->dev, "Failed to read %s\n", + tas_priv->rca_binaryname); + tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; + return -EINVAL; + } + buf = (unsigned char *)fmw->data; + fw_hdr->img_sz = get_unaligned_be32(&buf[offset]); + offset += 4; + if (fw_hdr->img_sz != fmw->size) { + dev_err(tas_priv->dev, + "File size not match, %d %u", (int)fmw->size, + fw_hdr->img_sz); + tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; + return -EINVAL; + } + + fw_hdr->checksum = get_unaligned_be32(&buf[offset]); + offset += 4; + fw_hdr->binary_version_num = get_unaligned_be32(&buf[offset]); + if (fw_hdr->binary_version_num < 0x103) { + dev_err(tas_priv->dev, "File version 0x%04x is too low", + fw_hdr->binary_version_num); + tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; + return -EINVAL; + } + offset += 4; + fw_hdr->drv_fw_version = get_unaligned_be32(&buf[offset]); + offset += 8; + fw_hdr->plat_type = buf[offset++]; + fw_hdr->dev_family = buf[offset++]; + fw_hdr->reserve = buf[offset++]; + fw_hdr->ndev = buf[offset++]; + if (offset + TASDEVICE_DEVICE_SUM > fw_hdr->img_sz) { + dev_err(tas_priv->dev, "rca_ready: Out of boundary!\n"); + tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; + return -EINVAL; + } + + for (i = 0; i < TASDEVICE_DEVICE_SUM; i++, offset++) + fw_hdr->devs[i] = buf[offset]; + + fw_hdr->nconfig = get_unaligned_be32(&buf[offset]); + offset += 4; + + for (i = 0; i < TASDEVICE_CONFIG_SUM; i++) { + fw_hdr->config_size[i] = get_unaligned_be32(&buf[offset]); + offset += 4; + total_config_sz += fw_hdr->config_size[i]; + } + + if (fw_hdr->img_sz - total_config_sz != (unsigned int)offset) { + dev_err(tas_priv->dev, "Bin file err %d - %d != %d!\n", + fw_hdr->img_sz, total_config_sz, (int)offset); + tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; + return -EINVAL; + } + + cfg_info = kcalloc(fw_hdr->nconfig, sizeof(*cfg_info), GFP_KERNEL); + if (!cfg_info) { + tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; + return -ENOMEM; + } + rca->cfg_info = cfg_info; + rca->ncfgs = 0; + for (i = 0; i < (int)fw_hdr->nconfig; i++) { + rca->ncfgs += 1; + cfg_info[i] = tasdevice_add_config(tas_priv, &buf[offset], + fw_hdr->config_size[i], &ret); + if (ret) { + tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; + return ret; + } + offset += (int)fw_hdr->config_size[i]; + } + + return ret; +} + +/* fixed m68k compiling issue: mapping table can save code field */ +static unsigned char map_dev_idx(struct tasdevice_fw *tas_fmw, + struct tasdev_blk *block) +{ + struct blktyp_devidx_map *p = + (struct blktyp_devidx_map *)non_ppc3_mapping_table; + struct tasdevice_dspfw_hdr *fw_hdr = &(tas_fmw->fw_hdr); + struct tasdevice_fw_fixed_hdr *fw_fixed_hdr = &(fw_hdr->fixed_hdr); + int i, n = ARRAY_SIZE(non_ppc3_mapping_table); + unsigned char dev_idx = 0; + + if (fw_fixed_hdr->ppcver >= PPC3_VERSION_TAS2781) { + p = (struct blktyp_devidx_map *)ppc3_tas2781_mapping_table; + n = ARRAY_SIZE(ppc3_tas2781_mapping_table); + } else if (fw_fixed_hdr->ppcver >= PPC3_VERSION) { + p = (struct blktyp_devidx_map *)ppc3_mapping_table; + n = ARRAY_SIZE(ppc3_mapping_table); + } + + for (i = 0; i < n; i++) { + if (block->type == p[i].blktyp) { + dev_idx = p[i].dev_idx; + break; + } + } + + return dev_idx; +} + +static int fw_parse_block_data_kernel(struct tasdevice_fw *tas_fmw, + struct tasdev_blk *block, const struct firmware *fmw, int offset) +{ + const unsigned char *data = fmw->data; + + if (offset + 16 > fmw->size) { + dev_err(tas_fmw->dev, "%s: File Size error\n", __func__); + return -EINVAL; + } + + /* + * Convert data[offset], data[offset + 1], data[offset + 2] and + * data[offset + 3] into host. + */ + block->type = get_unaligned_be32(&data[offset]); + offset += 4; + + block->is_pchksum_present = data[offset++]; + block->pchksum = data[offset++]; + block->is_ychksum_present = data[offset++]; + block->ychksum = data[offset++]; + block->blk_size = get_unaligned_be32(&data[offset]); + offset += 4; + block->nr_subblocks = get_unaligned_be32(&data[offset]); + offset += 4; + + /* + * Fixed m68k compiling issue: + * 1. mapping table can save code field. + * 2. storing the dev_idx as a member of block can reduce unnecessary + * time and system resource comsumption of dev_idx mapping every + * time the block data writing to the dsp. + */ + block->dev_idx = map_dev_idx(tas_fmw, block); + + if (offset + block->blk_size > fmw->size) { + dev_err(tas_fmw->dev, "%s: nSublocks error\n", __func__); + return -EINVAL; + } + /* instead of kzalloc+memcpy */ + block->data = kmemdup(&data[offset], block->blk_size, GFP_KERNEL); + if (!block->data) + return -ENOMEM; + + offset += block->blk_size; + + return offset; +} + +static int fw_parse_data_kernel(struct tasdevice_fw *tas_fmw, + struct tasdevice_data *img_data, const struct firmware *fmw, + int offset) +{ + const unsigned char *data = fmw->data; + struct tasdev_blk *blk; + unsigned int i; + + if (offset + 4 > fmw->size) { + dev_err(tas_fmw->dev, "%s: File Size error\n", __func__); + return -EINVAL; + } + img_data->nr_blk = get_unaligned_be32(&data[offset]); + offset += 4; + + img_data->dev_blks = kcalloc(img_data->nr_blk, + sizeof(struct tasdev_blk), GFP_KERNEL); + if (!img_data->dev_blks) + return -ENOMEM; + + for (i = 0; i < img_data->nr_blk; i++) { + blk = &(img_data->dev_blks[i]); + offset = fw_parse_block_data_kernel( + tas_fmw, blk, fmw, offset); + if (offset < 0) { + kfree(img_data->dev_blks); + return -EINVAL; + } + } + + return offset; +} + +static int fw_parse_program_data_kernel( + struct tasdevice_priv *tas_priv, struct tasdevice_fw *tas_fmw, + const struct firmware *fmw, int offset) +{ + struct tasdevice_prog *program; + unsigned int i; + + for (i = 0; i < tas_fmw->nr_programs; i++) { + program = &(tas_fmw->programs[i]); + if (offset + 72 > fmw->size) { + dev_err(tas_priv->dev, "%s: mpName error\n", __func__); + return -EINVAL; + } + /* skip 72 unused byts */ + offset += 72; + + offset = fw_parse_data_kernel(tas_fmw, &(program->dev_data), + fmw, offset); + if (offset < 0) + break; + } + + return offset; +} + +static int fw_parse_configuration_data_kernel(struct tasdevice_priv *tas_priv, + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) +{ + const unsigned char *data = fmw->data; + struct tasdevice_config *config; + unsigned int i; + + for (i = 0; i < tas_fmw->nr_configurations; i++) { + config = &(tas_fmw->configs[i]); + if (offset + 80 > fmw->size) { + dev_err(tas_priv->dev, "%s: mpName error\n", __func__); + return -EINVAL; + } + memcpy(config->name, &data[offset], 64); + /* skip extra 16 bytes */ + offset += 80; + + offset = fw_parse_data_kernel(tas_fmw, &(config->dev_data), + fmw, offset); + if (offset < 0) + break; + } + + return offset; +} + +static int fw_parse_variable_header_kernel(struct tasdevice_priv *tas_priv, + const struct firmware *fmw, int offset) +{ + struct tasdevice_fw *tas_fmw = tas_priv->fmw; + struct tasdevice_dspfw_hdr *fw_hdr = &(tas_fmw->fw_hdr); + struct tasdevice_config *config; + struct tasdevice_prog *program; + const unsigned char *buf = fmw->data; + unsigned short max_confs; + unsigned int i; + + if (offset + 12 + 4 * TASDEVICE_MAXPROGRAM_NUM_KERNEL > fmw->size) { + dev_err(tas_priv->dev, "%s: File Size error\n", __func__); + return -EINVAL; + } + fw_hdr->device_family = get_unaligned_be16(&buf[offset]); + if (fw_hdr->device_family != 0) { + dev_err(tas_priv->dev, "%s:not TAS device\n", __func__); + return -EINVAL; + } + offset += 2; + fw_hdr->device = get_unaligned_be16(&buf[offset]); + if (fw_hdr->device >= TASDEVICE_DSP_TAS_MAX_DEVICE || + fw_hdr->device == 6) { + dev_err(tas_priv->dev, "Unsupported dev %d\n", fw_hdr->device); + return -EINVAL; + } + offset += 2; + + tas_fmw->nr_programs = get_unaligned_be32(&buf[offset]); + offset += 4; + + if (tas_fmw->nr_programs == 0 || + tas_fmw->nr_programs > TASDEVICE_MAXPROGRAM_NUM_KERNEL) { + dev_err(tas_priv->dev, "mnPrograms is invalid\n"); + return -EINVAL; + } + + tas_fmw->programs = kcalloc(tas_fmw->nr_programs, + sizeof(*tas_fmw->programs), GFP_KERNEL); + if (!tas_fmw->programs) + return -ENOMEM; + + for (i = 0; i < tas_fmw->nr_programs; i++) { + program = &(tas_fmw->programs[i]); + program->prog_size = get_unaligned_be32(&buf[offset]); + offset += 4; + } + + /* Skip the unused prog_size */ + offset += 4 * (TASDEVICE_MAXPROGRAM_NUM_KERNEL - tas_fmw->nr_programs); + + tas_fmw->nr_configurations = get_unaligned_be32(&buf[offset]); + offset += 4; + + /* + * The max number of config in firmware greater than 4 pieces of + * tas2781s is different from the one lower than 4 pieces of + * tas2781s. + */ + max_confs = TASDEVICE_MAXCONFIG_NUM_KERNEL; + if (tas_fmw->nr_configurations == 0 || + tas_fmw->nr_configurations > max_confs) { + dev_err(tas_priv->dev, "%s: Conf is invalid\n", __func__); + kfree(tas_fmw->programs); + return -EINVAL; + } + + if (offset + 4 * max_confs > fmw->size) { + dev_err(tas_priv->dev, "%s: mpConfigurations err\n", __func__); + kfree(tas_fmw->programs); + return -EINVAL; + } + + tas_fmw->configs = kcalloc(tas_fmw->nr_configurations, + sizeof(*tas_fmw->configs), GFP_KERNEL); + if (!tas_fmw->configs) { + kfree(tas_fmw->programs); + return -ENOMEM; + } + + for (i = 0; i < tas_fmw->nr_programs; i++) { + config = &(tas_fmw->configs[i]); + config->cfg_size = get_unaligned_be32(&buf[offset]); + offset += 4; + } + + /* Skip the unused configs */ + offset += 4 * (max_confs - tas_fmw->nr_programs); + + return offset; +} + +static int tasdevice_single_byte_wr(void *context, unsigned char *data, + int sublocksize) +{ + struct tasdevice_priv *tas_priv = context; + unsigned short len = get_unaligned_be16(&data[2]); + int i, subblk_offset, rc; + + subblk_offset = 4; + if (subblk_offset + 4 * len > sublocksize) { + dev_err(tas_priv->dev, "process_block: Out of boundary\n"); + return 0; + } + + for (i = 0; i < len; i++) { + rc = tasdevice_spi_dev_write(tas_priv, + TASDEVICE_REG(data[subblk_offset], + data[subblk_offset + 1], data[subblk_offset + 2]), + data[subblk_offset + 3]); + if (rc < 0) { + dev_err(tas_priv->dev, + "process_block: single write error\n"); + subblk_offset |= OFFSET_ERROR_BIT; + } + subblk_offset += 4; + } + + return subblk_offset; +} + +static int tasdevice_burst_wr(void *context, unsigned char *data, + int sublocksize) +{ + struct tasdevice_priv *tas_priv = context; + unsigned short len = get_unaligned_be16(&data[2]); + int subblk_offset, rc; + + subblk_offset = 4; + if (subblk_offset + 4 + len > sublocksize) { + dev_err(tas_priv->dev, "%s: BST Out of boundary\n", __func__); + subblk_offset |= OFFSET_ERROR_BIT; + } + if (len % 4) { + dev_err(tas_priv->dev, "%s:Bst-len(%u)not div by 4\n", + __func__, len); + subblk_offset |= OFFSET_ERROR_BIT; + } + + rc = tasdevice_spi_dev_bulk_write(tas_priv, + TASDEVICE_REG(data[subblk_offset], data[subblk_offset + 1], + data[subblk_offset + 2]), &(data[subblk_offset + 4]), len); + if (rc < 0) { + dev_err(tas_priv->dev, "%s: bulk_write error = %d\n", + __func__, rc); + subblk_offset |= OFFSET_ERROR_BIT; + } + subblk_offset += (len + 4); + + return subblk_offset; +} + +static int tasdevice_delay(void *context, unsigned char *data, + int sublocksize) +{ + struct tasdevice_priv *tas_priv = context; + unsigned int sleep_time, subblk_offset = 2; + + if (subblk_offset + 2 > sublocksize) { + dev_err(tas_priv->dev, "%s: delay Out of boundary\n", + __func__); + subblk_offset |= OFFSET_ERROR_BIT; + } + sleep_time = get_unaligned_be16(&data[2]) * 1000; + fsleep(sleep_time); + subblk_offset += 2; + + return subblk_offset; +} + +static int tasdevice_field_wr(void *context, unsigned char *data, + int sublocksize) +{ + struct tasdevice_priv *tas_priv = context; + int rc, subblk_offset = 2; + + if (subblk_offset + 6 > sublocksize) { + dev_err(tas_priv->dev, "%s: bit write Out of boundary\n", + __func__); + subblk_offset |= OFFSET_ERROR_BIT; + } + rc = tasdevice_spi_dev_update_bits(tas_priv, + TASDEVICE_REG(data[subblk_offset + 2], + data[subblk_offset + 3], + data[subblk_offset + 4]), + data[subblk_offset + 1], data[subblk_offset + 5]); + if (rc < 0) { + dev_err(tas_priv->dev, "%s: update_bits error = %d\n", + __func__, rc); + subblk_offset |= OFFSET_ERROR_BIT; + } + subblk_offset += 6; + + return subblk_offset; +} + +static int tasdevice_process_block(void *context, unsigned char *data, + unsigned char dev_idx, int sublocksize) +{ + struct tasdevice_priv *tas_priv = context; + int blktyp = dev_idx & 0xC0, subblk_offset; + unsigned char subblk_typ = data[1]; + + if (tas_priv->is_loading == false) + return sublocksize; + + switch (subblk_typ) { + case TASDEVICE_CMD_SING_W: + subblk_offset = tasdevice_single_byte_wr(tas_priv, data, + sublocksize); + break; + case TASDEVICE_CMD_BURST: + subblk_offset = tasdevice_burst_wr(tas_priv, data, + sublocksize); + break; + case TASDEVICE_CMD_DELAY: + subblk_offset = tasdevice_delay(tas_priv, data, sublocksize); + break; + case TASDEVICE_CMD_FIELD_W: + subblk_offset = tasdevice_field_wr(tas_priv, data, + sublocksize); + break; + default: + subblk_offset = 2; + break; + } + if (((subblk_offset & OFFSET_ERROR_BIT) != 0) && blktyp != 0) { + if (blktyp == 0x80) { + tas_priv->cur_prog = -1; + tas_priv->cur_conf = -1; + } else + tas_priv->cur_conf = -1; + } + subblk_offset &= ~OFFSET_ERROR_BIT; + + return subblk_offset; +} + +void tasdevice_spi_select_cfg_blk(void *pContext, int conf_no, + unsigned char block_type) +{ + struct tasdevice_priv *tas_priv = pContext; + struct tasdevice_rca *rca = &(tas_priv->rcabin); + struct tasdevice_config_info **cfg_info = rca->cfg_info; + struct tasdev_blk_data **blk_data; + unsigned int j, k; + + if (conf_no >= rca->ncfgs || conf_no < 0 || !cfg_info) { + dev_err(tas_priv->dev, "conf_no should be not more than %u\n", + rca->ncfgs); + return; + } + blk_data = cfg_info[conf_no]->blk_data; + + for (j = 0; j < cfg_info[conf_no]->real_nblocks; j++) { + unsigned int length = 0, rc = 0; + + if (block_type > 5 || block_type < 2) { + dev_err(tas_priv->dev, + "block_type should be in range from 2 to 5\n"); + break; + } + if (block_type != blk_data[j]->block_type) + continue; + + for (k = 0; k < blk_data[j]->n_subblks; k++) { + tas_priv->is_loading = true; + + rc = tasdevice_process_block(tas_priv, + blk_data[j]->regdata + length, + blk_data[j]->dev_idx, + blk_data[j]->block_size - length); + length += rc; + if (blk_data[j]->block_size < length) { + dev_err(tas_priv->dev, + "%s: %u %u out of boundary\n", + __func__, length, + blk_data[j]->block_size); + break; + } + } + if (length != blk_data[j]->block_size) + dev_err(tas_priv->dev, "%s: %u %u size is not same\n", + __func__, length, blk_data[j]->block_size); + } +} + +static int tasdevice_load_block_kernel( + struct tasdevice_priv *tasdevice, struct tasdev_blk *block) +{ + const unsigned int blk_size = block->blk_size; + unsigned char *data = block->data; + unsigned int i, length; + + for (i = 0, length = 0; i < block->nr_subblocks; i++) { + int rc = tasdevice_process_block(tasdevice, data + length, + block->dev_idx, blk_size - length); + if (rc < 0) { + dev_err(tasdevice->dev, + "%s: %u %u sublock write error\n", + __func__, length, blk_size); + break; + } + length += rc; + if (blk_size < length) { + dev_err(tasdevice->dev, "%s: %u %u out of boundary\n", + __func__, length, blk_size); + break; + } + } + + return 0; +} + +static int fw_parse_variable_hdr(struct tasdevice_priv *tas_priv, + struct tasdevice_dspfw_hdr *fw_hdr, + const struct firmware *fmw, int offset) +{ + const unsigned char *buf = fmw->data; + int len = strlen((char *)&buf[offset]); + + len++; + + if (offset + len + 8 > fmw->size) { + dev_err(tas_priv->dev, "%s: File Size error\n", __func__); + return -EINVAL; + } + + offset += len; + + fw_hdr->device_family = get_unaligned_be32(&buf[offset]); + if (fw_hdr->device_family != 0) { + dev_err(tas_priv->dev, "%s: not TAS device\n", __func__); + return -EINVAL; + } + offset += 4; + + fw_hdr->device = get_unaligned_be32(&buf[offset]); + if (fw_hdr->device >= TASDEVICE_DSP_TAS_MAX_DEVICE || + fw_hdr->device == 6) { + dev_err(tas_priv->dev, "Unsupported dev %d\n", fw_hdr->device); + return -EINVAL; + } + offset += 4; + fw_hdr->ndev = 1; + + return offset; +} + +static int fw_parse_variable_header_git(struct tasdevice_priv + *tas_priv, const struct firmware *fmw, int offset) +{ + struct tasdevice_fw *tas_fmw = tas_priv->fmw; + struct tasdevice_dspfw_hdr *fw_hdr = &(tas_fmw->fw_hdr); + + offset = fw_parse_variable_hdr(tas_priv, fw_hdr, fmw, offset); + + return offset; +} + +static int fw_parse_block_data(struct tasdevice_fw *tas_fmw, + struct tasdev_blk *block, const struct firmware *fmw, int offset) +{ + unsigned char *data = (unsigned char *)fmw->data; + int n; + + if (offset + 8 > fmw->size) { + dev_err(tas_fmw->dev, "%s: Type error\n", __func__); + return -EINVAL; + } + block->type = get_unaligned_be32(&data[offset]); + offset += 4; + + if (tas_fmw->fw_hdr.fixed_hdr.drv_ver >= PPC_DRIVER_CRCCHK) { + if (offset + 8 > fmw->size) { + dev_err(tas_fmw->dev, "PChkSumPresent error\n"); + return -EINVAL; + } + block->is_pchksum_present = data[offset]; + offset++; + + block->pchksum = data[offset]; + offset++; + + block->is_ychksum_present = data[offset]; + offset++; + + block->ychksum = data[offset]; + offset++; + } else { + block->is_pchksum_present = 0; + block->is_ychksum_present = 0; + } + + block->nr_cmds = get_unaligned_be32(&data[offset]); + offset += 4; + + n = block->nr_cmds * 4; + if (offset + n > fmw->size) { + dev_err(tas_fmw->dev, + "%s: File Size(%lu) error offset = %d n = %d\n", + __func__, (unsigned long)fmw->size, offset, n); + return -EINVAL; + } + /* instead of kzalloc+memcpy */ + block->data = kmemdup(&data[offset], n, GFP_KERNEL); + if (!block->data) + return -ENOMEM; + + offset += n; + + return offset; +} + +/* + * When parsing error occurs, all the memory resource will be released + * in the end of tasdevice_rca_ready. + */ +static int fw_parse_data(struct tasdevice_fw *tas_fmw, + struct tasdevice_data *img_data, const struct firmware *fmw, + int offset) +{ + const unsigned char *data = (unsigned char *)fmw->data; + struct tasdev_blk *blk; + unsigned int i, n; + + if (offset + 64 > fmw->size) { + dev_err(tas_fmw->dev, "%s: Name error\n", __func__); + return -EINVAL; + } + memcpy(img_data->name, &data[offset], 64); + offset += 64; + + n = strlen((char *)&data[offset]); + n++; + if (offset + n + 2 > fmw->size) { + dev_err(tas_fmw->dev, "%s: Description error\n", __func__); + return -EINVAL; + } + offset += n; + img_data->nr_blk = get_unaligned_be16(&data[offset]); + offset += 2; + + img_data->dev_blks = kcalloc(img_data->nr_blk, + sizeof(*img_data->dev_blks), GFP_KERNEL); + if (!img_data->dev_blks) + return -ENOMEM; + + for (i = 0; i < img_data->nr_blk; i++) { + blk = &(img_data->dev_blks[i]); + offset = fw_parse_block_data(tas_fmw, blk, fmw, offset); + if (offset < 0) + return -EINVAL; + } + + return offset; +} + +/* + * When parsing error occurs, all the memory resource will be released + * in the end of tasdevice_rca_ready. + */ +static int fw_parse_program_data(struct tasdevice_priv *tas_priv, + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) +{ + unsigned char *buf = (unsigned char *)fmw->data; + struct tasdevice_prog *program; + int i; + + if (offset + 2 > fmw->size) { + dev_err(tas_priv->dev, "%s: File Size error\n", __func__); + return -EINVAL; + } + tas_fmw->nr_programs = get_unaligned_be16(&buf[offset]); + offset += 2; + + if (tas_fmw->nr_programs == 0) { + /* Not error in calibration Data file, return directly */ + dev_info(tas_priv->dev, "%s: No Programs data, maybe calbin\n", + __func__); + return offset; + } + + tas_fmw->programs = + kcalloc(tas_fmw->nr_programs, sizeof(*tas_fmw->programs), + GFP_KERNEL); + if (!tas_fmw->programs) + return -ENOMEM; + + for (i = 0; i < tas_fmw->nr_programs; i++) { + int n = 0; + + program = &(tas_fmw->programs[i]); + if (offset + 64 > fmw->size) { + dev_err(tas_priv->dev, "%s: mpName error\n", __func__); + return -EINVAL; + } + offset += 64; + + n = strlen((char *)&buf[offset]); + /* skip '\0' and 5 unused bytes */ + n += 6; + if (offset + n > fmw->size) { + dev_err(tas_priv->dev, "Description err\n"); + return -EINVAL; + } + + offset += n; + + offset = fw_parse_data(tas_fmw, &(program->dev_data), fmw, + offset); + if (offset < 0) + return offset; + } + + return offset; +} + +/* + * When parsing error occurs, all the memory resource will be released + * in the end of tasdevice_rca_ready. + */ +static int fw_parse_configuration_data(struct tasdevice_priv *tas_priv, + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) +{ + unsigned char *data = (unsigned char *)fmw->data; + struct tasdevice_config *config; + unsigned int i, n; + + if (offset + 2 > fmw->size) { + dev_err(tas_priv->dev, "%s: File Size error\n", __func__); + return -EINVAL; + } + tas_fmw->nr_configurations = get_unaligned_be16(&data[offset]); + offset += 2; + + if (tas_fmw->nr_configurations == 0) { + dev_err(tas_priv->dev, "%s: Conf is zero\n", __func__); + /* Not error for calibration Data file, return directly */ + return offset; + } + tas_fmw->configs = kcalloc(tas_fmw->nr_configurations, + sizeof(*tas_fmw->configs), GFP_KERNEL); + if (!tas_fmw->configs) + return -ENOMEM; + for (i = 0; i < tas_fmw->nr_configurations; i++) { + config = &(tas_fmw->configs[i]); + if (offset + 64 > fmw->size) { + dev_err(tas_priv->dev, "File Size err\n"); + return -EINVAL; + } + memcpy(config->name, &data[offset], 64); + offset += 64; + + n = strlen((char *)&data[offset]); + n += 15; + if (offset + n > fmw->size) { + dev_err(tas_priv->dev, "Description err\n"); + return -EINVAL; + } + offset += n; + offset = fw_parse_data(tas_fmw, &(config->dev_data), + fmw, offset); + if (offset < 0) + break; + } + + return offset; +} + +static bool check_inpage_yram_rg(struct tas_crc *cd, + unsigned char reg, unsigned char len) +{ + bool in = false; + + if (reg <= TAS2781_YRAM5_END_REG && + reg >= TAS2781_YRAM5_START_REG) { + if (reg + len > TAS2781_YRAM5_END_REG) + cd->len = TAS2781_YRAM5_END_REG - reg + 1; + else + cd->len = len; + cd->offset = reg; + in = true; + } else if (reg < TAS2781_YRAM5_START_REG) { + if (reg + len > TAS2781_YRAM5_START_REG) { + cd->offset = TAS2781_YRAM5_START_REG; + cd->len = len - TAS2781_YRAM5_START_REG + reg; + in = true; + } + } + + return in; +} + +static bool check_inpage_yram_bk1(struct tas_crc *cd, + unsigned char page, unsigned char reg, unsigned char len) +{ + bool in = false; + + if (page == TAS2781_YRAM1_PAGE) { + if (reg >= TAS2781_YRAM1_START_REG) { + cd->offset = reg; + cd->len = len; + in = true; + } else if (reg + len > TAS2781_YRAM1_START_REG) { + cd->offset = TAS2781_YRAM1_START_REG; + cd->len = len - TAS2781_YRAM1_START_REG + reg; + in = true; + } + } else if (page == TAS2781_YRAM3_PAGE) { + in = check_inpage_yram_rg(cd, reg, len); + } + + return in; +} + +/* + * Return Code: + * true -- the registers are in the inpage yram + * false -- the registers are NOT in the inpage yram + */ +static bool check_inpage_yram(struct tas_crc *cd, unsigned char book, + unsigned char page, unsigned char reg, unsigned char len) +{ + bool in = false; + + if (book == TAS2781_YRAM_BOOK1) + in = check_inpage_yram_bk1(cd, page, reg, len); + else if (book == TAS2781_YRAM_BOOK2 && page == TAS2781_YRAM5_PAGE) + in = check_inpage_yram_rg(cd, reg, len); + + return in; +} + +static bool check_inblock_yram_bk(struct tas_crc *cd, + unsigned char page, unsigned char reg, unsigned char len) +{ + bool in = false; + + if ((page >= TAS2781_YRAM4_START_PAGE && + page <= TAS2781_YRAM4_END_PAGE) || + (page >= TAS2781_YRAM2_START_PAGE && + page <= TAS2781_YRAM2_END_PAGE)) { + if (reg <= TAS2781_YRAM2_END_REG && + reg >= TAS2781_YRAM2_START_REG) { + cd->offset = reg; + cd->len = len; + in = true; + } else if (reg < TAS2781_YRAM2_START_REG) { + if (reg + len - 1 >= TAS2781_YRAM2_START_REG) { + cd->offset = TAS2781_YRAM2_START_REG; + cd->len = reg + len - TAS2781_YRAM2_START_REG; + in = true; + } + } + } + + return in; +} + +/* + * Return Code: + * true -- the registers are in the inblock yram + * false -- the registers are NOT in the inblock yram + */ +static bool check_inblock_yram(struct tas_crc *cd, unsigned char book, + unsigned char page, unsigned char reg, unsigned char len) +{ + bool in = false; + + if (book == TAS2781_YRAM_BOOK1 || book == TAS2781_YRAM_BOOK2) + in = check_inblock_yram_bk(cd, page, reg, len); + + return in; +} + +static bool check_yram(struct tas_crc *cd, unsigned char book, + unsigned char page, unsigned char reg, unsigned char len) +{ + bool in; + + in = check_inpage_yram(cd, book, page, reg, len); + if (!in) + in = check_inblock_yram(cd, book, page, reg, len); + + return in; +} + +static int tasdev_multibytes_chksum(struct tasdevice_priv *tasdevice, + unsigned char book, unsigned char page, + unsigned char reg, unsigned int len) +{ + struct tas_crc crc_data; + unsigned char crc_chksum = 0; + unsigned char nBuf1[128]; + int ret = 0, i; + bool in; + + if ((reg + len - 1) > 127) { + ret = -EINVAL; + dev_err(tasdevice->dev, "firmware error\n"); + goto end; + } + + if ((book == TASDEVICE_BOOK_ID(TAS2781_SA_COEFF_SWAP_REG)) && + (page == TASDEVICE_PAGE_ID(TAS2781_SA_COEFF_SWAP_REG)) && + (reg == TASDEVICE_REG_ID(TAS2781_SA_COEFF_SWAP_REG)) && + (len == 4)) { + /* DSP swap command, pass */ + ret = 0; + goto end; + } + + in = check_yram(&crc_data, book, page, reg, len); + if (!in) + goto end; + + if (len == 1) { + dev_err(tasdevice->dev, "firmware error\n"); + ret = -EINVAL; + goto end; + } + + ret = tasdevice_spi_dev_bulk_read(tasdevice, + TASDEVICE_REG(book, page, crc_data.offset), + nBuf1, crc_data.len); + if (ret < 0) + goto end; + + for (i = 0; i < crc_data.len; i++) { + if ((book == TASDEVICE_BOOK_ID(TAS2781_SA_COEFF_SWAP_REG)) && + (page == TASDEVICE_PAGE_ID(TAS2781_SA_COEFF_SWAP_REG)) && + ((i + crc_data.offset) >= + TASDEVICE_REG_ID(TAS2781_SA_COEFF_SWAP_REG)) && + ((i + crc_data.offset) <= + (TASDEVICE_REG_ID(TAS2781_SA_COEFF_SWAP_REG) + 4))) + /* DSP swap command, bypass */ + continue; + else + crc_chksum += crc8(tasdevice->crc8_lkp_tbl, &nBuf1[i], + 1, 0); + } + + ret = crc_chksum; + +end: + return ret; +} + +static int do_singlereg_checksum(struct tasdevice_priv *tasdevice, + unsigned char book, unsigned char page, + unsigned char reg, unsigned char val) +{ + struct tas_crc crc_data; + unsigned int nData1; + int ret = 0; + bool in; + + /* DSP swap command, pass */ + if ((book == TASDEVICE_BOOK_ID(TAS2781_SA_COEFF_SWAP_REG)) && + (page == TASDEVICE_PAGE_ID(TAS2781_SA_COEFF_SWAP_REG)) && + (reg >= TASDEVICE_REG_ID(TAS2781_SA_COEFF_SWAP_REG)) && + (reg <= (TASDEVICE_REG_ID(TAS2781_SA_COEFF_SWAP_REG) + 4))) + return 0; + + in = check_yram(&crc_data, book, page, reg, 1); + if (!in) + return 0; + ret = tasdevice_spi_dev_read(tasdevice, + TASDEVICE_REG(book, page, reg), &nData1); + if (ret < 0) + return ret; + + if (nData1 != val) { + dev_err(tasdevice->dev, + "B[0x%x]P[0x%x]R[0x%x] W[0x%x], R[0x%x]\n", + book, page, reg, val, nData1); + tasdevice->err_code |= ERROR_YRAM_CRCCHK; + return -EAGAIN; + } + + ret = crc8(tasdevice->crc8_lkp_tbl, &val, 1, 0); + + return ret; +} + +static void set_err_prg_cfg(unsigned int type, struct tasdevice_priv *p) +{ + if ((type == MAIN_ALL_DEVICES) || (type == MAIN_DEVICE_A) || + (type == MAIN_DEVICE_B) || (type == MAIN_DEVICE_C) || + (type == MAIN_DEVICE_D)) + p->cur_prog = -1; + else + p->cur_conf = -1; +} + +static int tasdev_bytes_chksum(struct tasdevice_priv *tas_priv, + struct tasdev_blk *block, unsigned char book, + unsigned char page, unsigned char reg, unsigned int len, + unsigned char val, unsigned char *crc_chksum) +{ + int ret; + + if (len > 1) + ret = tasdev_multibytes_chksum(tas_priv, book, page, reg, + len); + else + ret = do_singlereg_checksum(tas_priv, book, page, reg, val); + + if (ret > 0) { + *crc_chksum += ret; + goto end; + } + + if (ret != -EAGAIN) + goto end; + + block->nr_retry--; + if (block->nr_retry > 0) + goto end; + + set_err_prg_cfg(block->type, tas_priv); + +end: + return ret; +} + +static int tasdev_multibytes_wr(struct tasdevice_priv *tas_priv, + struct tasdev_blk *block, unsigned char book, + unsigned char page, unsigned char reg, unsigned char *data, + unsigned int len, unsigned int *nr_cmds, + unsigned char *crc_chksum) +{ + int ret; + + if (len > 1) { + ret = tasdevice_spi_dev_bulk_write(tas_priv, + TASDEVICE_REG(book, page, reg), data + 3, len); + if (ret < 0) + return ret; + if (block->is_ychksum_present) + ret = tasdev_bytes_chksum(tas_priv, block, + book, page, reg, len, 0, crc_chksum); + } else { + ret = tasdevice_spi_dev_write(tas_priv, + TASDEVICE_REG(book, page, reg), data[3]); + if (ret < 0) + return ret; + if (block->is_ychksum_present) + ret = tasdev_bytes_chksum(tas_priv, block, book, + page, reg, 1, data[3], crc_chksum); + } + + if (!block->is_ychksum_present || ret >= 0) { + *nr_cmds += 1; + if (len >= 2) + *nr_cmds += ((len - 2) / 4) + 1; + } + + return ret; +} + +static int tasdev_block_chksum(struct tasdevice_priv *tas_priv, + struct tasdev_blk *block) +{ + unsigned int nr_value; + int ret; + + ret = tasdevice_spi_dev_read(tas_priv, TASDEVICE_CHECKSUM, &nr_value); + if (ret < 0) { + dev_err(tas_priv->dev, "%s: read error %d.\n", __func__, ret); + set_err_prg_cfg(block->type, tas_priv); + return ret; + } + + if ((nr_value & 0xff) != block->pchksum) { + dev_err(tas_priv->dev, "%s: PChkSum err %d ", __func__, ret); + dev_err(tas_priv->dev, "PChkSum = 0x%x, Reg = 0x%x\n", + block->pchksum, (nr_value & 0xff)); + tas_priv->err_code |= ERROR_PRAM_CRCCHK; + ret = -EAGAIN; + block->nr_retry--; + + if (block->nr_retry <= 0) + set_err_prg_cfg(block->type, tas_priv); + } else { + tas_priv->err_code &= ~ERROR_PRAM_CRCCHK; + } + + return ret; +} + +static int tasdev_load_blk(struct tasdevice_priv *tas_priv, + struct tasdev_blk *block) +{ + unsigned int sleep_time, len, nr_cmds; + unsigned char offset, book, page, val; + unsigned char *data = block->data; + unsigned char crc_chksum = 0; + int ret = 0; + + while (block->nr_retry > 0) { + if (block->is_pchksum_present) { + ret = tasdevice_spi_dev_write(tas_priv, + TASDEVICE_CHECKSUM, 0); + if (ret < 0) + break; + } + + if (block->is_ychksum_present) + crc_chksum = 0; + + nr_cmds = 0; + + while (nr_cmds < block->nr_cmds) { + data = block->data + nr_cmds * 4; + + book = data[0]; + page = data[1]; + offset = data[2]; + val = data[3]; + + nr_cmds++; + /* Single byte write */ + if (offset <= 0x7F) { + ret = tasdevice_spi_dev_write(tas_priv, + TASDEVICE_REG(book, page, offset), + val); + if (ret < 0) + break; + if (block->is_ychksum_present) { + ret = tasdev_bytes_chksum(tas_priv, + block, book, page, offset, + 1, val, &crc_chksum); + if (ret < 0) + break; + } + continue; + } + /* sleep command */ + if (offset == 0x81) { + /* book -- data[0] page -- data[1] */ + sleep_time = ((book << 8) + page)*1000; + fsleep(sleep_time); + continue; + } + /* Multiple bytes write */ + if (offset == 0x85) { + data += 4; + len = (book << 8) + page; + book = data[0]; + page = data[1]; + offset = data[2]; + ret = tasdev_multibytes_wr(tas_priv, + block, book, page, offset, data, + len, &nr_cmds, &crc_chksum); + if (ret < 0) + break; + } + } + if (ret == -EAGAIN) { + if (block->nr_retry > 0) + continue; + } else if (ret < 0) { + /* err in current device, skip it */ + break; + } + + if (block->is_pchksum_present) { + ret = tasdev_block_chksum(tas_priv, block); + if (ret == -EAGAIN) { + if (block->nr_retry > 0) + continue; + } else if (ret < 0) { + /* err in current device, skip it */ + break; + } + } + + if (block->is_ychksum_present) { + /* TBD, open it when FW ready */ + dev_err(tas_priv->dev, + "Blk YChkSum: FW = 0x%x, YCRC = 0x%x\n", + block->ychksum, crc_chksum); + + tas_priv->err_code &= + ~ERROR_YRAM_CRCCHK; + ret = 0; + } + /* skip current blk */ + break; + } + + return ret; +} + +static int tasdevice_load_block(struct tasdevice_priv *tas_priv, + struct tasdev_blk *block) +{ + int ret = 0; + + block->nr_retry = 6; + if (tas_priv->is_loading == false) + return 0; + ret = tasdev_load_blk(tas_priv, block); + if (ret < 0) + dev_err(tas_priv->dev, "Blk (%d) load error\n", block->type); + + return ret; +} + +static int dspfw_default_callback(struct tasdevice_priv *tas_priv, + unsigned int drv_ver, unsigned int ppcver) +{ + int rc = 0; + + if (drv_ver == 0x100) { + if (ppcver >= PPC3_VERSION) { + tas_priv->fw_parse_variable_header = + fw_parse_variable_header_kernel; + tas_priv->fw_parse_program_data = + fw_parse_program_data_kernel; + tas_priv->fw_parse_configuration_data = + fw_parse_configuration_data_kernel; + tas_priv->tasdevice_load_block = + tasdevice_load_block_kernel; + } else { + switch (ppcver) { + case 0x00: + tas_priv->fw_parse_variable_header = + fw_parse_variable_header_git; + tas_priv->fw_parse_program_data = + fw_parse_program_data; + tas_priv->fw_parse_configuration_data = + fw_parse_configuration_data; + tas_priv->tasdevice_load_block = + tasdevice_load_block; + break; + default: + dev_err(tas_priv->dev, + "%s: PPCVer must be 0x0 or 0x%02x", + __func__, PPC3_VERSION); + dev_err(tas_priv->dev, " Current:0x%02x\n", + ppcver); + rc = -EINVAL; + break; + } + } + } else { + dev_err(tas_priv->dev, + "DrvVer must be 0x0, 0x230 or above 0x230 "); + dev_err(tas_priv->dev, "current is 0x%02x\n", drv_ver); + rc = -EINVAL; + } + + return rc; +} + +static int load_calib_data(struct tasdevice_priv *tas_priv, + struct tasdevice_data *dev_data) +{ + struct tasdev_blk *block; + unsigned int i; + int ret = 0; + + for (i = 0; i < dev_data->nr_blk; i++) { + block = &(dev_data->dev_blks[i]); + ret = tasdevice_load_block(tas_priv, block); + if (ret < 0) + break; + } + + return ret; +} + +static int fw_parse_header(struct tasdevice_priv *tas_priv, + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) +{ + struct tasdevice_dspfw_hdr *fw_hdr = &(tas_fmw->fw_hdr); + struct tasdevice_fw_fixed_hdr *fw_fixed_hdr = &(fw_hdr->fixed_hdr); + static const unsigned char magic_number[] = {0x35, 0x35, 0x35, 0x32, }; + const unsigned char *buf = (unsigned char *)fmw->data; + + if (offset + 92 > fmw->size) { + dev_err(tas_priv->dev, "%s: File Size error\n", __func__); + offset = -EINVAL; + goto out; + } + if (memcmp(&buf[offset], magic_number, 4)) { + dev_err(tas_priv->dev, "%s: Magic num NOT match\n", __func__); + offset = -EINVAL; + goto out; + } + offset += 4; + + /* + * Convert data[offset], data[offset + 1], data[offset + 2] and + * data[offset + 3] into host + */ + fw_fixed_hdr->fwsize = get_unaligned_be32(&buf[offset]); + offset += 4; + if (fw_fixed_hdr->fwsize != fmw->size) { + dev_err(tas_priv->dev, "File size not match, %lu %u", + (unsigned long)fmw->size, fw_fixed_hdr->fwsize); + offset = -EINVAL; + goto out; + } + offset += 4; + fw_fixed_hdr->ppcver = get_unaligned_be32(&buf[offset]); + offset += 8; + fw_fixed_hdr->drv_ver = get_unaligned_be32(&buf[offset]); + offset += 72; + +out: + return offset; +} + +static int tasdevice_dspfw_ready(const struct firmware *fmw, void *context) +{ + struct tasdevice_priv *tas_priv = context; + struct tasdevice_fw_fixed_hdr *fw_fixed_hdr; + struct tasdevice_fw *tas_fmw; + int offset = 0, ret = 0; + + if (!fmw || !fmw->data) { + dev_err(tas_priv->dev, "%s: Failed to read firmware %s\n", + __func__, tas_priv->coef_binaryname); + return -EINVAL; + } + + tas_priv->fmw = kzalloc(sizeof(*tas_priv->fmw), GFP_KERNEL); + if (!tas_priv->fmw) + return -ENOMEM; + tas_fmw = tas_priv->fmw; + tas_fmw->dev = tas_priv->dev; + offset = fw_parse_header(tas_priv, tas_fmw, fmw, offset); + + if (offset == -EINVAL) + return -EINVAL; + + fw_fixed_hdr = &(tas_fmw->fw_hdr.fixed_hdr); + /* Support different versions of firmware */ + switch (fw_fixed_hdr->drv_ver) { + case 0x301: + case 0x302: + case 0x502: + case 0x503: + tas_priv->fw_parse_variable_header = + fw_parse_variable_header_kernel; + tas_priv->fw_parse_program_data = + fw_parse_program_data_kernel; + tas_priv->fw_parse_configuration_data = + fw_parse_configuration_data_kernel; + tas_priv->tasdevice_load_block = + tasdevice_load_block_kernel; + break; + case 0x202: + case 0x400: + tas_priv->fw_parse_variable_header = + fw_parse_variable_header_git; + tas_priv->fw_parse_program_data = + fw_parse_program_data; + tas_priv->fw_parse_configuration_data = + fw_parse_configuration_data; + tas_priv->tasdevice_load_block = + tasdevice_load_block; + break; + default: + ret = dspfw_default_callback(tas_priv, + fw_fixed_hdr->drv_ver, fw_fixed_hdr->ppcver); + if (ret) + return ret; + break; + } + + offset = tas_priv->fw_parse_variable_header(tas_priv, fmw, offset); + if (offset < 0) + return offset; + + offset = tas_priv->fw_parse_program_data(tas_priv, tas_fmw, fmw, + offset); + if (offset < 0) + return offset; + + offset = tas_priv->fw_parse_configuration_data(tas_priv, + tas_fmw, fmw, offset); + if (offset < 0) + ret = offset; + + return ret; +} + +int tasdevice_spi_dsp_parser(void *context) +{ + struct tasdevice_priv *tas_priv = context; + const struct firmware *fw_entry; + int ret; + + ret = request_firmware(&fw_entry, tas_priv->coef_binaryname, + tas_priv->dev); + if (ret) { + dev_err(tas_priv->dev, "%s: load %s error\n", __func__, + tas_priv->coef_binaryname); + return ret; + } + + ret = tasdevice_dspfw_ready(fw_entry, tas_priv); + release_firmware(fw_entry); + fw_entry = NULL; + + return ret; +} + +static void tasdev_dsp_prog_blk_remove(struct tasdevice_prog *prog) +{ + struct tasdevice_data *tas_dt; + struct tasdev_blk *blk; + unsigned int i; + + if (!prog) + return; + + tas_dt = &(prog->dev_data); + + if (!tas_dt->dev_blks) + return; + + for (i = 0; i < tas_dt->nr_blk; i++) { + blk = &(tas_dt->dev_blks[i]); + kfree(blk->data); + } + kfree(tas_dt->dev_blks); +} + +static void tasdev_dsp_prog_remove(struct tasdevice_prog *prog, + unsigned short nr) +{ + int i; + + for (i = 0; i < nr; i++) + tasdev_dsp_prog_blk_remove(&prog[i]); + kfree(prog); +} + +static void tasdev_dsp_cfg_blk_remove(struct tasdevice_config *cfg) +{ + struct tasdevice_data *tas_dt; + struct tasdev_blk *blk; + unsigned int i; + + if (cfg) { + tas_dt = &(cfg->dev_data); + + if (!tas_dt->dev_blks) + return; + + for (i = 0; i < tas_dt->nr_blk; i++) { + blk = &(tas_dt->dev_blks[i]); + kfree(blk->data); + } + kfree(tas_dt->dev_blks); + } +} + +static void tasdev_dsp_cfg_remove(struct tasdevice_config *config, + unsigned short nr) +{ + int i; + + for (i = 0; i < nr; i++) + tasdev_dsp_cfg_blk_remove(&config[i]); + kfree(config); +} + +void tasdevice_spi_dsp_remove(void *context) +{ + struct tasdevice_priv *tas_dev = context; + + if (!tas_dev->fmw) + return; + + if (tas_dev->fmw->programs) + tasdev_dsp_prog_remove(tas_dev->fmw->programs, + tas_dev->fmw->nr_programs); + if (tas_dev->fmw->configs) + tasdev_dsp_cfg_remove(tas_dev->fmw->configs, + tas_dev->fmw->nr_configurations); + kfree(tas_dev->fmw); + tas_dev->fmw = NULL; +} + +static void tas2781_clear_calfirmware(struct tasdevice_fw *tas_fmw) +{ + struct tasdevice_calibration *calibration; + struct tasdev_blk *block; + unsigned int blks; + int i; + + if (!tas_fmw->calibrations) + goto out; + + for (i = 0; i < tas_fmw->nr_calibrations; i++) { + calibration = &(tas_fmw->calibrations[i]); + if (!calibration) + continue; + + if (!calibration->dev_data.dev_blks) + continue; + + for (blks = 0; blks < calibration->dev_data.nr_blk; blks++) { + block = &(calibration->dev_data.dev_blks[blks]); + if (!block) + continue; + kfree(block->data); + } + kfree(calibration->dev_data.dev_blks); + } + kfree(tas_fmw->calibrations); +out: + kfree(tas_fmw); +} + +void tasdevice_spi_calbin_remove(void *context) +{ + struct tasdevice_priv *tas_priv = context; + + if (tas_priv->cali_data_fmw) { + tas2781_clear_calfirmware(tas_priv->cali_data_fmw); + tas_priv->cali_data_fmw = NULL; + } +} + +void tasdevice_spi_config_info_remove(void *context) +{ + struct tasdevice_priv *tas_priv = context; + struct tasdevice_rca *rca = &(tas_priv->rcabin); + struct tasdevice_config_info **ci = rca->cfg_info; + unsigned int i, j; + + if (!ci) + return; + for (i = 0; i < rca->ncfgs; i++) { + if (!ci[i]) + continue; + if (ci[i]->blk_data) { + for (j = 0; j < ci[i]->real_nblocks; j++) { + if (!ci[i]->blk_data[j]) + continue; + kfree(ci[i]->blk_data[j]->regdata); + kfree(ci[i]->blk_data[j]); + } + kfree(ci[i]->blk_data); + } + kfree(ci[i]); + } + kfree(ci); +} + +static int tasdevice_load_data(struct tasdevice_priv *tas_priv, + struct tasdevice_data *dev_data) +{ + struct tasdev_blk *block; + unsigned int i; + int ret = 0; + + for (i = 0; i < dev_data->nr_blk; i++) { + block = &(dev_data->dev_blks[i]); + ret = tas_priv->tasdevice_load_block(tas_priv, block); + if (ret < 0) + break; + } + + return ret; +} + +int tasdevice_spi_select_tuningprm_cfg(void *context, int prm_no, + int cfg_no, int rca_conf_no) +{ + struct tasdevice_priv *tas_priv = context; + struct tasdevice_rca *rca = &(tas_priv->rcabin); + struct tasdevice_config_info **cfg_info = rca->cfg_info; + struct tasdevice_fw *tas_fmw = tas_priv->fmw; + struct tasdevice_prog *program; + struct tasdevice_config *conf; + int prog_status = 0; + int status; + + if (!tas_fmw) { + dev_err(tas_priv->dev, "%s: Firmware is NULL\n", __func__); + return 0; + } + + if (cfg_no >= tas_fmw->nr_configurations) { + dev_err(tas_priv->dev, + "%s: cfg(%d) is not in range of conf %u\n", + __func__, cfg_no, tas_fmw->nr_configurations); + return 0; + } + + if (prm_no >= tas_fmw->nr_programs) { + dev_err(tas_priv->dev, + "%s: prm(%d) is not in range of Programs %u\n", + __func__, prm_no, tas_fmw->nr_programs); + return 0; + } + + if (rca_conf_no >= rca->ncfgs || + rca_conf_no < 0 || + !cfg_info) { + dev_err(tas_priv->dev, + "conf_no:%d should be in range from 0 to %u\n", + rca_conf_no, rca->ncfgs-1); + return 0; + } + + if (prm_no >= 0 && + (tas_priv->cur_prog != prm_no || + tas_priv->force_fwload_status)) { + tas_priv->cur_conf = -1; + tas_priv->is_loading = true; + prog_status++; + } + + if (prog_status) { + program = &(tas_fmw->programs[prm_no]); + tasdevice_load_data(tas_priv, &(program->dev_data)); + if (tas_priv->is_loaderr == false && + tas_priv->is_loading == true) { + struct tasdevice_fw *cal_fmw = + tas_priv->cali_data_fmw; + + if (cal_fmw) { + struct tasdevice_calibration + *cal = cal_fmw->calibrations; + + if (cal) + load_calib_data(tas_priv, + &(cal->dev_data)); + } + tas_priv->cur_prog = prm_no; + } + + } + + if (cfg_no && + (cfg_no != tas_priv->cur_conf) && + (tas_priv->is_loaderr == false)) { + status++; + tas_priv->is_loading = true; + } else { + tas_priv->is_loading = false; + } + + if (status) { + conf = &(tas_fmw->configs[cfg_no]); + status = 0; + tasdevice_load_data(tas_priv, &(conf->dev_data)); + if (tas_priv->is_loaderr == true) { + status |= 1 << 4; + } else if (tas_priv->is_loaderr == false && + tas_priv->is_loading == true) { + tas_priv->cur_conf = cfg_no; + } + } else { + dev_dbg(tas_priv->dev, "%s: Unneeded loading dsp conf %d\n", + __func__, cfg_no); + } + + return prog_status; +} + +int tasdevice_spi_prmg_load(void *context, int prm_no) +{ + struct tasdevice_priv *tas_priv = context; + struct tasdevice_fw *tas_fmw = tas_priv->fmw; + struct tasdevice_prog *program; + int prog_status = 0; + + if (!tas_fmw) { + dev_err(tas_priv->dev, "%s: Firmware is NULL\n", __func__); + return 0; + } + + if (prm_no >= tas_fmw->nr_programs) { + dev_err(tas_priv->dev, + "%s: prm(%d) is not in range of Programs %u\n", + __func__, prm_no, tas_fmw->nr_programs); + return 0; + } + + if (prm_no >= 0 && tas_priv->cur_prog != prm_no) { + tas_priv->cur_conf = -1; + tas_priv->is_loading = true; + prog_status++; + } + if (prog_status) { + program = &(tas_fmw->programs[prm_no]); + tasdevice_load_data(tas_priv, &(program->dev_data)); + if ((tas_priv->is_loaderr == false) && + (tas_priv->is_loading == true)) + tas_priv->cur_prog = prm_no; + } + + return prog_status; +} + +int tasdevice_spi_prmg_calibdata_load(void *context, int prm_no) +{ + struct tasdevice_priv *tas_priv = context; + struct tasdevice_fw *tas_fmw = tas_priv->fmw; + struct tasdevice_prog *program; + int prog_status = 0; + + if (!tas_fmw) { + dev_err(tas_priv->dev, "%s: Firmware is NULL\n", __func__); + return 0; + } + + if (prm_no >= tas_fmw->nr_programs) { + dev_err(tas_priv->dev, + "%s: prm(%d) is not in range of Programs %u\n", + __func__, prm_no, tas_fmw->nr_programs); + return 0; + } + + if (prm_no >= 0 && tas_priv->cur_prog != prm_no) { + tas_priv->cur_conf = -1; + tas_priv->is_loading = true; + prog_status++; + } + tas_priv->is_loaderr = false; + + if (prog_status) { + program = &(tas_fmw->programs[prm_no]); + tasdevice_load_data(tas_priv, &(program->dev_data)); + if (tas_priv->is_loaderr == false && + tas_priv->is_loading == true) { + struct tasdevice_fw *cal_fmw = + tas_priv->cali_data_fmw; + + if (cal_fmw) { + struct tasdevice_calibration *cal = + cal_fmw->calibrations; + + if (cal) + load_calib_data(tas_priv, + &(cal->dev_data)); + } + tas_priv->cur_prog = prm_no; + } + + } + + return prog_status; +} + +void tasdevice_spi_tuning_switch(void *context, int state) +{ + struct tasdevice_priv *tas_priv = context; + struct tasdevice_fw *tas_fmw = tas_priv->fmw; + int profile_cfg_id = tas_priv->rcabin.profile_cfg_id; + + if (tas_priv->fw_state == TASDEVICE_DSP_FW_FAIL) { + dev_err(tas_priv->dev, "DSP bin file not loaded\n"); + return; + } + + if (state == 0) { + if (tas_priv->cur_prog < tas_fmw->nr_programs) { + /* dsp mode or tuning mode */ + profile_cfg_id = tas_priv->rcabin.profile_cfg_id; + tasdevice_spi_select_tuningprm_cfg(tas_priv, + tas_priv->cur_prog, tas_priv->cur_conf, + profile_cfg_id); + } + + tasdevice_spi_select_cfg_blk(tas_priv, profile_cfg_id, + TASDEVICE_BIN_BLK_PRE_POWER_UP); + } else { + tasdevice_spi_select_cfg_blk(tas_priv, profile_cfg_id, + TASDEVICE_BIN_BLK_PRE_SHUTDOWN); + } +} -- 2.40.1

6 6

[PATCH v2 0/2] ASoC: dt-bindings: convert qcom sound bindings to yaml
by Rayyan Ansari 11 Jul '24

11 Jul '24

Hi, These patches convert the remaining plain text bindings for Qualcomm sound drivers to dt schema, so device trees can be validated against them. v1: https://lore.kernel.org/all/20240709152808.155405-1-rayyan.ansari@linaro.or… Thanks, Rayyan Rayyan Ansari (2): ASoC: dt-bindings: qcom,msm8916-wcd-digital-codec: convert to dtschema ASoC: dt-bindings: qcom,apq8096-sndcard: use dtschema .../bindings/sound/qcom,apq8096.txt | 128 ------------------ .../sound/qcom,msm8916-wcd-digital-codec.yaml | 55 ++++++++ .../sound/qcom,msm8916-wcd-digital.txt | 20 --- .../bindings/sound/qcom,sm8250.yaml | 1 + 4 files changed, 56 insertions(+), 148 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/qcom,apq8096.txt create mode 100644 Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-digital-codec.yaml delete mode 100644 Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-digital.txt -- 2.45.2

3 4

[PATCH v2 0/4] firmware: cs_dsp: Some small coding improvements
by Richard Fitzgerald 11 Jul '24

11 Jul '24

Commit series that makes some small improvements to code and the kernel log messages. --- Changes since V1: - Replaced commit #3 with one that keeps the wmfw format version message on its own line instead of merging it into the INFO text message. - Commit #4 rebased onto the new #3 Richard Fitzgerald (4): firmware: cs_dsp: Don't allocate temporary buffer for info text firmware: cs_dsp: Make wmfw and bin filename arguments const char * firmware: cs_dsp: Clarify wmfw format version log message firmware: cs_dsp: Rename fw_ver to wmfw_ver drivers/firmware/cirrus/cs_dsp.c | 68 +++++++++----------------- include/linux/firmware/cirrus/cs_dsp.h | 10 ++-- sound/soc/codecs/wm_adsp.c | 2 +- 3 files changed, 29 insertions(+), 51 deletions(-) -- 2.39.2

3 6

[PATCH v2] ASoC: dt-bindings: cirrus,cs4270: Convert to dtschema
by Animesh Agarwal 11 Jul '24

11 Jul '24

Convert the Cirrus Logic CS4270 audio CODEC bindings to DT schema. Add missing va-supply, vd-supply and vlc-supply properties, because they are already being used in the DTS and the driver for this device. Cc: Daniel Baluta <daniel.baluta(a)nxp.com> Signed-off-by: Animesh Agarwal <animeshagarwal28(a)gmail.com> --- Changes in v2: - Added proper description for power supply properties. - Added ref to dai-common. - Added '#sound-dai-cells'. - Dropped unused labels in example. - Replaced example node name to a generic name. --- .../bindings/sound/cirrus,cs4270.yaml | 59 +++++++++++++++++++ .../devicetree/bindings/sound/cs4270.txt | 21 ------- 2 files changed, 59 insertions(+), 21 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/cirrus,cs4270.yaml delete mode 100644 Documentation/devicetree/bindings/sound/cs4270.txt diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs4270.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs4270.yaml new file mode 100644 index 000000000000..336e11773694 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cirrus,cs4270.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/cirrus,cs4270.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic CS4270 audio CODEC + +maintainers: + - patches(a)opensource.cirrus.com + +description: + The CS4270 is a stereo audio codec. The driver for this device currently only + supports I2C. + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: cirrus,cs4270 + + reg: + maxItems: 1 + + '#sound-dai-cells': + const: 0 + + reset-gpios: + description: + This pin will be deasserted before communication to the codec starts. + maxItems: 1 + + va-supply: + description: Analog power supply. + + vd-supply: + description: Digital power supply. + + vlc-supply: + description: Serial Control Port power supply. + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec@48 { + compatible = "cirrus,cs4270"; + reg = <0x48>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/cs4270.txt b/Documentation/devicetree/bindings/sound/cs4270.txt deleted file mode 100644 index c33770ec4c3c..000000000000 --- a/Documentation/devicetree/bindings/sound/cs4270.txt +++ /dev/null @@ -1,21 +0,0 @@ -CS4270 audio CODEC - -The driver for this device currently only supports I2C. - -Required properties: - - - compatible : "cirrus,cs4270" - - - reg : the I2C address of the device for I2C - -Optional properties: - - - reset-gpios : a GPIO spec for the reset pin. If specified, it will be - deasserted before communication to the codec starts. - -Example: - -codec: cs4270@48 { - compatible = "cirrus,cs4270"; - reg = <0x48>; -}; -- 2.45.2

3 2