July 2024 - Alsa-devel - mailman.alsa-project.org

ALSA 1.2.8 release
by Jaroslav Kysela 08 Dec '25

08 Dec '25

Hello all, new ALSA userspace packages were released. You may download them from the ALSA website http://www.alsa-project.org or directly: HTTP: https://www.alsa-project.org/files/pub FTP: ftp://ftp.alsa-project.org/pub Released packages: alsa-lib alsa-utils alsa-ucm-conf tinycompress Full list of changes: https://www.alsa-project.org/wiki/Changes_v1.2.7.2_v1.2.8 The fingerprint of the public signing key is: F04D F507 37AC 1A88 4C4B 3D71 8380 596D A6E5 9C91 Have fun, Jaroslav -- Jaroslav Kysela <perex(a)perex.cz> Linux Sound Maintainer; ALSA Project; Red Hat, Inc.

2 9

[alsa-devel] View alsa-lib plugins setup for any app?
by Eliot Blennerhassett 05 Dec '25

05 Dec '25

Greetings, running aplay -v will show the plugin chain setup. /proc/asound/card/pcm/* shows hw and sw params for the card driver when in use by any app Is there any way to show the alsa-lib plugin settings a-la aplay for an arbitrary application? thanks -- Eliot

4 8

[PATCH] ASoC: SOF: Intel: Retry codec probing if it fails
by Kai Vehmanen 04 Dec '25

04 Dec '25

From: Hui Wang <hui.wang(a)canonical.com> On the latest Lenovo Thinkstation laptops, we often experience the speaker failure after rebooting, check the dmesg, we could see: sof-audio-pci-intel-tgl 0000:00:1f.3: codec #0 probe error, ret: -5 The analogue codec on the machine is ALC287, then we designed a testcase to reboot and check the codec probing result repeatedly, we found the analogue codec probing always failed at least once within several minutes to several hours (roughly 1 reboot per min). This issue happens on all laptops of this Thinkstation model, but with legacy HDA driver, we couldn't reproduce this issue on those laptops. And so far, this issue is not reproduced on machines which don't belong to this model. We tried to make the hda_dsp_ctrl_init_chip() same as hda_intel_init_chip() which is the controller init routine in the legacy HDA driver, but it didn't help. We found when issue happens, the resp is -1, and if we let driver re-run send_cmd() and get_response(), it will get the correct response 10ec0287, then driver continues the rest work, finally boot to the desktop and all audio function work well. Here adding codec probing retries to 3 times, it could fix the issue on this Thinkstation model, and it doesn't bring impact to other machines. Reviewed-by: Bard Liao <bard.liao(a)intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Signed-off-by: Hui Wang <hui.wang(a)canonical.com> Signed-off-by: Kai Vehmanen <kai.vehmanen(a)linux.intel.com> --- sound/soc/sof/intel/hda-codec.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) Notes: - patch for-5.16 on top of for-5.16 8a724d5f60 diff --git a/sound/soc/sof/intel/hda-codec.c b/sound/soc/sof/intel/hda-codec.c index 6744318de612..13cd96e6724a 100644 --- a/sound/soc/sof/intel/hda-codec.c +++ b/sound/soc/sof/intel/hda-codec.c @@ -22,6 +22,7 @@ #if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA_AUDIO_CODEC) #define IDISP_VID_INTEL 0x80860000 +#define CODEC_PROBE_RETRIES 3 /* load the legacy HDA codec driver */ static int request_codec_module(struct hda_codec *codec) @@ -121,12 +122,15 @@ static int hda_codec_probe(struct snd_sof_dev *sdev, int address, u32 hda_cmd = (address << 28) | (AC_NODE_ROOT << 20) | (AC_VERB_PARAMETERS << 8) | AC_PAR_VENDOR_ID; u32 resp = -1; - int ret; + int ret, retry = 0; + + do { + mutex_lock(&hbus->core.cmd_mutex); + snd_hdac_bus_send_cmd(&hbus->core, hda_cmd); + snd_hdac_bus_get_response(&hbus->core, address, &resp); + mutex_unlock(&hbus->core.cmd_mutex); + } while (resp == -1 && retry++ < CODEC_PROBE_RETRIES); - mutex_lock(&hbus->core.cmd_mutex); - snd_hdac_bus_send_cmd(&hbus->core, hda_cmd); - snd_hdac_bus_get_response(&hbus->core, address, &resp); - mutex_unlock(&hbus->core.cmd_mutex); if (resp == -1) return -EIO; dev_dbg(sdev->dev, "HDA codec #%d probed OK: response: %x\n", base-commit: 8a724d5f60904084e09de2685ff9e77bc8a40815 -- 2.34.1

3 2

[alsa-devel] Applied "ASoC: tlv320aic32x4: Model CODEC_CLKIN in CCF" to the asoc tree
by Mark Brown 02 Dec '25

02 Dec '25

The patch ASoC: tlv320aic32x4: Model CODEC_CLKIN in CCF has been applied to the asoc tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From fd2df3aeafa4b4cc468d58e147e0822967034b71 Mon Sep 17 00:00:00 2001 From: Annaliese McDermond <nh6z(a)nh6z.net> Date: Thu, 21 Mar 2019 17:58:46 -0700 Subject: [PATCH] ASoC: tlv320aic32x4: Model CODEC_CLKIN in CCF Model and manage codec clock input as a component in the Core Clock Framework. This should allow us to do some more complex clock management and power control. Also, some of the on-board chip clocks can be exposed to the outside, and this change will make those clocks easier to consume by other parts of the kernel. Signed-off-by: Annaliese McDermond <nh6z(a)nh6z.net> Signed-off-by: Mark Brown <broonie(a)kernel.org> --- sound/soc/codecs/tlv320aic32x4-clk.c | 34 ++++++++++++++++++++++++++++ sound/soc/codecs/tlv320aic32x4.c | 18 +++++++++++---- 2 files changed, 47 insertions(+), 5 deletions(-) diff --git a/sound/soc/codecs/tlv320aic32x4-clk.c b/sound/soc/codecs/tlv320aic32x4-clk.c index 5e495fc8d931..cded85009c8c 100644 --- a/sound/soc/codecs/tlv320aic32x4-clk.c +++ b/sound/soc/codecs/tlv320aic32x4-clk.c @@ -265,6 +265,30 @@ static const struct clk_ops aic32x4_pll_ops = { .get_parent = clk_aic32x4_pll_get_parent, }; +static int clk_aic32x4_codec_clkin_set_parent(struct clk_hw *hw, u8 index) +{ + struct clk_aic32x4 *mux = to_clk_aic32x4(hw); + + return regmap_update_bits(mux->regmap, + AIC32X4_CLKMUX, + AIC32X4_CODEC_CLKIN_MASK, index << AIC32X4_CODEC_CLKIN_SHIFT); +} + +static u8 clk_aic32x4_codec_clkin_get_parent(struct clk_hw *hw) +{ + struct clk_aic32x4 *mux = to_clk_aic32x4(hw); + unsigned int val; + + regmap_read(mux->regmap, AIC32X4_CLKMUX, &val); + + return (val & AIC32X4_CODEC_CLKIN_MASK) >> AIC32X4_CODEC_CLKIN_SHIFT; +} + +static const struct clk_ops aic32x4_codec_clkin_ops = { + .set_parent = clk_aic32x4_codec_clkin_set_parent, + .get_parent = clk_aic32x4_codec_clkin_get_parent, +}; + static struct aic32x4_clkdesc aic32x4_clkdesc_array[] = { { .name = "pll", @@ -274,6 +298,14 @@ static struct aic32x4_clkdesc aic32x4_clkdesc_array[] = { .ops = &aic32x4_pll_ops, .reg = 0, }, + { + .name = "codec_clkin", + .parent_names = + (const char *[]) { "mclk", "bclk", "gpio", "pll" }, + .num_parents = 4, + .ops = &aic32x4_codec_clkin_ops, + .reg = 0, + }, }; static struct clk *aic32x4_register_clk(struct device *dev, @@ -314,6 +346,8 @@ int aic32x4_register_clocks(struct device *dev, const char *mclk_name) */ aic32x4_clkdesc_array[0].parent_names = (const char* []) { mclk_name, "bclk", "gpio", "din" }; + aic32x4_clkdesc_array[1].parent_names = + (const char *[]) { mclk_name, "bclk", "gpio", "pll" }; for (i = 0; i < ARRAY_SIZE(aic32x4_clkdesc_array); ++i) aic32x4_register_clk(dev, &aic32x4_clkdesc_array[i]); diff --git a/sound/soc/codecs/tlv320aic32x4.c b/sound/soc/codecs/tlv320aic32x4.c index 7cf8c7cedfe1..5496e4e080f4 100644 --- a/sound/soc/codecs/tlv320aic32x4.c +++ b/sound/soc/codecs/tlv320aic32x4.c @@ -735,12 +735,9 @@ static int aic32x4_setup_clocks(struct snd_soc_component *component, aic32x4_set_processing_blocks(component, aic32x4_divs[i].r_block, aic32x4_divs[i].p_block); - /* PLL as CODEC_CLKIN */ - snd_soc_component_update_bits(component, AIC32X4_CLKMUX, - AIC32X4_CODEC_CLKIN_MASK, - AIC32X4_CODEC_CLKIN_PLL << AIC32X4_CODEC_CLKIN_SHIFT); /* DAC_MOD_CLK as BDIV_CLKIN */ - snd_soc_component_update_bits(component, AIC32X4_IFACE3, AIC32X4_BDIVCLK_MASK, + snd_soc_component_update_bits(component, AIC32X4_IFACE3, + AIC32X4_BDIVCLK_MASK, AIC32X4_DACMOD2BCLK << AIC32X4_BDIVCLK_SHIFT); /* NDAC divider value */ @@ -987,6 +984,15 @@ static int aic32x4_component_probe(struct snd_soc_component *component) { struct aic32x4_priv *aic32x4 = snd_soc_component_get_drvdata(component); u32 tmp_reg; + int ret; + + struct clk_bulk_data clocks[] = { + { .id = "codec_clkin" }, + }; + + ret = devm_clk_bulk_get(component->dev, ARRAY_SIZE(clocks), clocks); + if (ret) + return ret; if (gpio_is_valid(aic32x4->rstn_gpio)) { ndelay(10); @@ -999,6 +1005,8 @@ static int aic32x4_component_probe(struct snd_soc_component *component) if (aic32x4->setup) aic32x4_setup_gpios(component); + clk_set_parent(clocks[0].clk, clocks[1].clk); + /* Power platform configuration */ if (aic32x4->power_cfg & AIC32X4_PWR_MICBIAS_2075_LDOIN) { snd_soc_component_write(component, AIC32X4_MICBIAS, -- 2.20.1

7 8

[PATCH] ASoC: wm8994: Prevent access to invalid VU register bits on WM1811
by Sylwester Nawrocki 20 Nov '25

20 Nov '25

The ADC2 and DAC2 are not available on WM1811 device. This patch moves the ADC2, DAC2 VU bitfields to a separate array so we can skip accessing them and avoid unreadable register access on WM1811. This allows to get rid of warnings during boot like: wm8994-codec: ASoC: error at soc_component_read_no_lock on wm8994-codec: -5 Signed-off-by: Sylwester Nawrocki <s.nawrocki(a)samsung.com> --- sound/soc/codecs/wm8994.c | 60 ++++++++++++++++++++++++++++----------- 1 file changed, 44 insertions(+), 16 deletions(-) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index a84ae879d37e..038be667c1a6 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -43,10 +43,12 @@ #define WM8994_NUM_DRC 3 #define WM8994_NUM_EQ 3 -static struct { +struct wm8994_reg_mask { unsigned int reg; unsigned int mask; -} wm8994_vu_bits[] = { +}; + +static struct wm8994_reg_mask wm8994_vu_bits[] = { { WM8994_LEFT_LINE_INPUT_1_2_VOLUME, WM8994_IN1_VU }, { WM8994_RIGHT_LINE_INPUT_1_2_VOLUME, WM8994_IN1_VU }, { WM8994_LEFT_LINE_INPUT_3_4_VOLUME, WM8994_IN2_VU }, @@ -60,14 +62,10 @@ static struct { { WM8994_AIF1_DAC1_LEFT_VOLUME, WM8994_AIF1DAC1_VU }, { WM8994_AIF1_DAC1_RIGHT_VOLUME, WM8994_AIF1DAC1_VU }, - { WM8994_AIF1_DAC2_LEFT_VOLUME, WM8994_AIF1DAC2_VU }, - { WM8994_AIF1_DAC2_RIGHT_VOLUME, WM8994_AIF1DAC2_VU }, { WM8994_AIF2_DAC_LEFT_VOLUME, WM8994_AIF2DAC_VU }, { WM8994_AIF2_DAC_RIGHT_VOLUME, WM8994_AIF2DAC_VU }, { WM8994_AIF1_ADC1_LEFT_VOLUME, WM8994_AIF1ADC1_VU }, { WM8994_AIF1_ADC1_RIGHT_VOLUME, WM8994_AIF1ADC1_VU }, - { WM8994_AIF1_ADC2_LEFT_VOLUME, WM8994_AIF1ADC2_VU }, - { WM8994_AIF1_ADC2_RIGHT_VOLUME, WM8994_AIF1ADC2_VU }, { WM8994_AIF2_ADC_LEFT_VOLUME, WM8994_AIF2ADC_VU }, { WM8994_AIF2_ADC_RIGHT_VOLUME, WM8994_AIF1ADC2_VU }, { WM8994_DAC1_LEFT_VOLUME, WM8994_DAC1_VU }, @@ -76,6 +74,14 @@ static struct { { WM8994_DAC2_RIGHT_VOLUME, WM8994_DAC2_VU }, }; +/* VU bitfields for ADC2, DAC2 not available on WM1811 */ +static struct wm8994_reg_mask wm8994_adc2_dac2_vu_bits[] = { + { WM8994_AIF1_DAC2_LEFT_VOLUME, WM8994_AIF1DAC2_VU }, + { WM8994_AIF1_DAC2_RIGHT_VOLUME, WM8994_AIF1DAC2_VU }, + { WM8994_AIF1_ADC2_LEFT_VOLUME, WM8994_AIF1ADC2_VU }, + { WM8994_AIF1_ADC2_RIGHT_VOLUME, WM8994_AIF1ADC2_VU }, +}; + static int wm8994_drc_base[] = { WM8994_AIF1_DRC1_1, WM8994_AIF1_DRC2_1, @@ -1030,6 +1036,26 @@ static bool wm8994_check_class_w_digital(struct snd_soc_component *component) return true; } +static void wm8994_update_vu_bits(struct snd_soc_component *component) +{ + struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component); + struct wm8994 *control = wm8994->wm8994; + int i; + + for (i = 0; i < ARRAY_SIZE(wm8994_vu_bits); i++) + snd_soc_component_write(component, wm8994_vu_bits[i].reg, + snd_soc_component_read(component, + wm8994_vu_bits[i].reg)); + if (control->type == WM1811) + return; + + for (i = 0; i < ARRAY_SIZE(wm8994_adc2_dac2_vu_bits); i++) + snd_soc_component_write(component, + wm8994_adc2_dac2_vu_bits[i].reg, + snd_soc_component_read(component, + wm8994_adc2_dac2_vu_bits[i].reg)); +} + static int aif_mclk_set(struct snd_soc_component *component, int aif, bool enable) { struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component); @@ -1076,7 +1102,7 @@ static int aif1clk_ev(struct snd_soc_dapm_widget *w, struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component); struct wm8994 *control = wm8994->wm8994; int mask = WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC1R_ENA; - int ret, i; + int ret; int dac; int adc; int val; @@ -1144,10 +1170,7 @@ static int aif1clk_ev(struct snd_soc_dapm_widget *w, break; case SND_SOC_DAPM_POST_PMU: - for (i = 0; i < ARRAY_SIZE(wm8994_vu_bits); i++) - snd_soc_component_write(component, wm8994_vu_bits[i].reg, - snd_soc_component_read(component, - wm8994_vu_bits[i].reg)); + wm8994_update_vu_bits(component); break; case SND_SOC_DAPM_PRE_PMD: @@ -1181,7 +1204,7 @@ static int aif2clk_ev(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); - int ret, i; + int ret; int dac; int adc; int val; @@ -1237,10 +1260,7 @@ static int aif2clk_ev(struct snd_soc_dapm_widget *w, break; case SND_SOC_DAPM_POST_PMU: - for (i = 0; i < ARRAY_SIZE(wm8994_vu_bits); i++) - snd_soc_component_write(component, wm8994_vu_bits[i].reg, - snd_soc_component_read(component, - wm8994_vu_bits[i].reg)); + wm8994_update_vu_bits(component); break; case SND_SOC_DAPM_PRE_PMD: @@ -4346,6 +4366,14 @@ static int wm8994_component_probe(struct snd_soc_component *component) wm8994_vu_bits[i].mask, wm8994_vu_bits[i].mask); + if (control->type != WM1811) { + for (i = 0; i < ARRAY_SIZE(wm8994_adc2_dac2_vu_bits); i++) + snd_soc_component_update_bits(component, + wm8994_adc2_dac2_vu_bits[i].reg, + wm8994_adc2_dac2_vu_bits[i].mask, + wm8994_adc2_dac2_vu_bits[i].mask); + } + /* Set the low bit of the 3D stereo depth so TLV matches */ snd_soc_component_update_bits(component, WM8994_AIF1_DAC1_FILTERS_2, 1 << WM8994_AIF1DAC1_3D_GAIN_SHIFT, -- 2.17.1

4 3

[PATCH] MAINTAINERS: update Tzung-Bi's email address
by Tzung-Bi Shih 11 Nov '25

11 Nov '25

Use kernel.org account instead. Signed-off-by: Tzung-Bi Shih <tzungbi(a)kernel.org> --- .../devicetree/bindings/sound/google,cros-ec-codec.yaml | 2 +- Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml | 2 +- MAINTAINERS | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml index c3e9f3485449..dea293f403d9 100644 --- a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml +++ b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml @@ -8,7 +8,7 @@ title: Audio codec controlled by ChromeOS EC maintainers: - Cheng-Yi Chiang <cychiang(a)chromium.org> - - Tzung-Bi Shih <tzungbi(a)google.com> + - Tzung-Bi Shih <tzungbi(a)kernel.org> description: | Google's ChromeOS EC codec is a digital mic codec provided by the diff --git a/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml b/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml index 1d73204451b1..ea7d4900ee4a 100644 --- a/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml +++ b/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Realtek rt1015p codec devicetree bindings maintainers: - - Tzung-Bi Shih <tzungbi(a)google.com> + - Tzung-Bi Shih <tzungbi(a)kernel.org> description: | Rt1015p is a rt1015 variant which does not support I2C and diff --git a/MAINTAINERS b/MAINTAINERS index cf0f18502372..f9749afc0b9d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4906,7 +4906,7 @@ F: drivers/platform/chrome/ CHROMEOS EC CODEC DRIVER M: Cheng-Yi Chiang <cychiang(a)chromium.org> -M: Tzung-Bi Shih <tzungbi(a)google.com> +M: Tzung-Bi Shih <tzungbi(a)kernel.org> R: Guenter Roeck <groeck(a)chromium.org> L: chrome-platform(a)lists.linux.dev S: Maintained -- 2.38.0.135.g90850a2211-goog

3 3

[alsa-devel] MOTU Midi Express XT
by holger＠dehnhardt.org 06 Nov '25

06 Nov '25

I own a MOTU Midi Express XT 8x8 interface which is connected through the parallel port. Recently I upgraded my system and the new motherboard does not have an ISA parallel port anymore... So I bought a PCI parallel port extension card - hoping that it will work with the ALSA driver (mtpav). So I changed the interrupt an port address in modules.conf but the driver is no longer recognized as an ALSA driver even though it loads without errors. As the device still perfectly fits my needs I would like to modify the driver to get it working again. Can anyone give me advice what should be changed in the drivers code to make it work on a pci port? Thanks Holger

3 12

[PATCH v1] slimbus: qcom-ngd-ctrl: Add stream disable support
by Viken Dadhaniya 24 Sep '25

24 Sep '25

Currently slimbus driver doesn't support stream disable callback, it only supports stream enable callback. In slimbus usecase, client is switching to new frequency with same channel and calling enable stream callback for new frequency but DSP subsystem is crashing as we are switching to new frequency with same channel without disabling stream for older frequency. Ideally, before switching to another frequency, client should call disable stream callback and then enable stream for newer frequency. Hence add support to disable stream via qcom_slim_ngd_disable_stream(). Signed-off-by: Viken Dadhaniya <quic_vdadhani(a)quicinc.com> --- drivers/slimbus/qcom-ngd-ctrl.c | 70 +++++++++++++++++++++++++++++++++ drivers/slimbus/slimbus.h | 13 ++++++ 2 files changed, 83 insertions(+) diff --git a/drivers/slimbus/qcom-ngd-ctrl.c b/drivers/slimbus/qcom-ngd-ctrl.c index e0b21f0f79c1..d952827d2e12 100644 --- a/drivers/slimbus/qcom-ngd-ctrl.c +++ b/drivers/slimbus/qcom-ngd-ctrl.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 // Copyright (c) 2011-2017, The Linux Foundation. All rights reserved. // Copyright (c) 2018, Linaro Limited +// Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. #include <linux/irq.h> #include <linux/kernel.h> @@ -1084,6 +1085,74 @@ static int qcom_slim_ngd_enable_stream(struct slim_stream_runtime *rt) return ret; } +static int qcom_slim_ngd_disable_stream(struct slim_stream_runtime *rt) +{ + struct slim_device *sdev = rt->dev; + struct slim_controller *ctrl = sdev->ctrl; + struct slim_val_inf msg = {0}; + u8 wbuf[SLIM_MSGQ_BUF_LEN]; + u8 rbuf[SLIM_MSGQ_BUF_LEN]; + struct slim_msg_txn txn = {0,}; + int i, ret; + + txn.mt = SLIM_MSG_MT_DEST_REFERRED_USER; + txn.dt = SLIM_MSG_DEST_LOGICALADDR; + txn.la = SLIM_LA_MGR; + txn.ec = 0; + txn.msg = &msg; + txn.msg->num_bytes = 0; + txn.msg->wbuf = wbuf; + txn.msg->rbuf = rbuf; + + for (i = 0; i < rt->num_ports; i++) { + struct slim_port *port = &rt->ports[i]; + + if (txn.msg->num_bytes == 0) { + wbuf[txn.msg->num_bytes++] = (u8)(SLIM_CH_REMOVE << 6) + | (sdev->laddr & 0x1f); + + ret = slim_alloc_txn_tid(ctrl, &txn); + if (ret) { + dev_err(&sdev->dev, "Fail to allocate TID\n"); + return -ENXIO; + } + wbuf[txn.msg->num_bytes++] = txn.tid; + } + wbuf[txn.msg->num_bytes++] = port->ch.id; + } + + txn.mc = SLIM_USR_MC_CHAN_CTRL; + txn.rl = txn.msg->num_bytes + 4; + ret = qcom_slim_ngd_xfer_msg_sync(ctrl, &txn); + if (ret) { + slim_free_txn_tid(ctrl, &txn); + dev_err(&sdev->dev, "TX timed out:MC:0x%x,mt:0x%x ret:%d\n", + txn.mc, txn.mt, ret); + return ret; + } + + txn.mc = SLIM_USR_MC_RECONFIG_NOW; + txn.msg->num_bytes = 2; + wbuf[1] = sdev->laddr; + txn.rl = txn.msg->num_bytes + 4; + + ret = slim_alloc_txn_tid(ctrl, &txn); + if (ret) { + dev_err(ctrl->dev, "Fail to allocate TID ret:%d\n", ret); + return ret; + } + + wbuf[0] = txn.tid; + ret = qcom_slim_ngd_xfer_msg_sync(ctrl, &txn); + if (ret) { + slim_free_txn_tid(ctrl, &txn); + dev_err(&sdev->dev, "TX timed out:MC:0x%x,mt:0x%x ret:%d\n", + txn.mc, txn.mt, ret); + } + + return ret; +} + static int qcom_slim_ngd_get_laddr(struct slim_controller *ctrl, struct slim_eaddr *ea, u8 *laddr) { @@ -1642,6 +1711,7 @@ static int qcom_slim_ngd_ctrl_probe(struct platform_device *pdev) ctrl->ctrl.clkgear = SLIM_MAX_CLK_GEAR; ctrl->ctrl.get_laddr = qcom_slim_ngd_get_laddr; ctrl->ctrl.enable_stream = qcom_slim_ngd_enable_stream; + ctrl->ctrl.disable_stream = qcom_slim_ngd_disable_stream; ctrl->ctrl.xfer_msg = qcom_slim_ngd_xfer_msg; ctrl->ctrl.wakeup = NULL; ctrl->state = QCOM_SLIM_NGD_CTRL_DOWN; diff --git a/drivers/slimbus/slimbus.h b/drivers/slimbus/slimbus.h index 00a7f112574b..21543d125614 100644 --- a/drivers/slimbus/slimbus.h +++ b/drivers/slimbus/slimbus.h @@ -1,6 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (c) 2011-2017, The Linux Foundation + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. */ #ifndef _DRIVERS_SLIMBUS_H @@ -316,6 +317,18 @@ enum slim_transport_protocol { SLIM_PROTO_EXT_HALF_DUP, }; +/* + * enum slim_ch_control: Channel control. + * Activate will schedule channel and/or group of channels in the TDM frame. + * Suspend will keep the schedule but data-transfer won't happen. + * Remove will remove the channel/group from the TDM frame. + */ +enum slim_ch_control { + SLIM_CH_ACTIVATE, + SLIM_CH_SUSPEND, + SLIM_CH_REMOVE, +}; + /** * struct slim_stream_runtime - SLIMbus stream runtime instance * -- 2.17.1

2 2

retire_capture_urb: Corrected urb data len
by Sean Anderson 01 Aug '25

01 Aug '25

Hi all, I have a "FiiO DigiHug USB Audio" sound card (1852:7022) [3]. I have had no problems with the audio, but I did notice a large number of message like retire_capture_urb: 4992 callbacks suppressed in my dmesg [1]. This is caused by the "Corrected urb data len." warning. The patch adding this warning [2] makes it seem like this warning should be an uncommon occurance. However, based on the number of suppressed callbacks, this seems to be happening at a rate of around 500 Hz. Is this buggy hardware? Or is this a bug in the driver? Does there need to be a quirk? Or perhaps the warning above should be a debug instead? I'm using 5.15.0-46-generic. I know, I know; this is a vendor kernel. However, I went through the commits for sound/usb/pcm.c and didn't see any major differences. I also previously saw this issue on 5.4, so this probably isn't a regression. --Sean [1] I would have liked to post the actual message, but I was unable to figure out how to disable ratelimiting. I tried setting /proc/sys/kernel/printk_ratelimit to 0, /proc/sys/kernel/printk_ratelimit_burst to 5000, and /proc/sys/kernel/printk to 8. However, nothing seemed to have any effect (except that the callbacks suppressed messages were disabled). I find this very strange, given that the callbacks suppressed message uses KERN_WARN, and so does dev_warn_ratelimited. [2] https://lore.kernel.org/all/4B28A659.6070303@ladisch.de/T/ [3] Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x1852 GYROCOM C&C Co., LTD idProduct 0x7022 bcdDevice 0.01 iManufacturer 1 FiiO iProduct 2 DigiHug USB Audio iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0182 bNumInterfaces 4 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.00 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 58 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0012 1x 18 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 1 Control Device bInterfaceProtocol 0 iInterface 3 FiiO USB DAC-E10 AudioControl Interface Descriptor: bLength 10 bDescriptorType 36 bDescriptorSubtype 1 (HEADER) bcdADC 1.00 wTotalLength 0x003e bInCollection 2 baInterfaceNr(0) 2 baInterfaceNr(1) 3 AudioControl Interface Descriptor: bLength 12 bDescriptorType 36 bDescriptorSubtype 2 (INPUT_TERMINAL) bTerminalID 5 wTerminalType 0x0605 SPDIF interface bAssocTerminal 0 bNrChannels 2 wChannelConfig 0x0003 Left Front (L) Right Front (R) iChannelNames 0 iTerminal 0 AudioControl Interface Descriptor: bLength 12 bDescriptorType 36 bDescriptorSubtype 2 (INPUT_TERMINAL) bTerminalID 9 wTerminalType 0x0101 USB Streaming bAssocTerminal 0 bNrChannels 2 wChannelConfig 0x0003 Left Front (L) Right Front (R) iChannelNames 0 iTerminal 0 AudioControl Interface Descriptor: bLength 9 bDescriptorType 36 bDescriptorSubtype 3 (OUTPUT_TERMINAL) bTerminalID 3 wTerminalType 0x0605 SPDIF interface bAssocTerminal 0 bSourceID 16 iTerminal 0 AudioControl Interface Descriptor: bLength 9 bDescriptorType 36 bDescriptorSubtype 3 (OUTPUT_TERMINAL) bTerminalID 7 wTerminalType 0x0101 USB Streaming bAssocTerminal 0 bSourceID 5 iTerminal 0 AudioControl Interface Descriptor: bLength 10 bDescriptorType 36 bDescriptorSubtype 6 (FEATURE_UNIT) bUnitID 16 bSourceID 9 bControlSize 1 bmaControls(0) 0x01 Mute Control bmaControls(1) 0x02 Volume Control bmaControls(2) 0x02 Volume Control iFeature 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 7 bDelay 0 frames wFormatTag 0x0001 PCM AudioStreaming Interface Descriptor: bLength 26 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 2 bSubframeSize 2 bBitResolution 16 bSamFreqType 6 Discrete tSamFreq[ 0] 8000 tSamFreq[ 1] 16000 tSamFreq[ 2] 32000 tSamFreq[ 3] 44100 tSamFreq[ 4] 48000 tSamFreq[ 5] 96000 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 9 Transfer Type Isochronous Synch Type Adaptive Usage Type Data wMaxPacketSize 0x0184 1x 388 bytes bInterval 1 bRefresh 0 bSynchAddress 0 AudioStreaming Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 2 Decoded PCM samples wLockDelay 0x0002 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 2 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 7 bDelay 0 frames wFormatTag 0x0001 PCM AudioStreaming Interface Descriptor: bLength 26 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 2 bSubframeSize 3 bBitResolution 24 bSamFreqType 6 Discrete tSamFreq[ 0] 8000 tSamFreq[ 1] 16000 tSamFreq[ 2] 32000 tSamFreq[ 3] 44100 tSamFreq[ 4] 48000 tSamFreq[ 5] 96000 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 9 Transfer Type Isochronous Synch Type Adaptive Usage Type Data wMaxPacketSize 0x0246 1x 582 bytes bInterval 1 bRefresh 0 bSynchAddress 0 AudioStreaming Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 2 Decoded PCM samples wLockDelay 0x0002 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 9 bDelay 0 frames wFormatTag 0x0001 PCM AudioStreaming Interface Descriptor: bLength 20 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 2 bSubframeSize 2 bBitResolution 16 bSamFreqType 4 Discrete tSamFreq[ 0] 32000 tSamFreq[ 1] 44100 tSamFreq[ 2] 48000 tSamFreq[ 3] 96000 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 9 Transfer Type Isochronous Synch Type Adaptive Usage Type Data wMaxPacketSize 0x0184 1x 388 bytes bInterval 1 bRefresh 0 bSynchAddress 0 AudioStreaming Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 2 Decoded PCM samples wLockDelay 0x0002 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 2 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 9 bDelay 0 frames wFormatTag 0x0001 PCM AudioStreaming Interface Descriptor: bLength 20 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 2 bSubframeSize 3 bBitResolution 24 bSamFreqType 4 Discrete tSamFreq[ 0] 32000 tSamFreq[ 1] 44100 tSamFreq[ 2] 48000 tSamFreq[ 3] 96000 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 9 Transfer Type Isochronous Synch Type Adaptive Usage Type Data wMaxPacketSize 0x0246 1x 582 bytes bInterval 1 bRefresh 0 bSynchAddress 0 AudioStreaming Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 2 Decoded PCM samples wLockDelay 0x0002 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 3 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 9 bDelay 0 frames wFormatTag 0x2001 IEC1937_AC-3 AudioStreaming Interface Descriptor: bLength 11 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 3 (FORMAT_TYPE_III) bNrChannels 2 bSubframeSize 2 bBitResolution 16 bSamFreqType 1 Discrete tSamFreq[ 0] 48000 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 9 Transfer Type Isochronous Synch Type Adaptive Usage Type Data wMaxPacketSize 0x00c0 1x 192 bytes bInterval 1 bRefresh 0 bSynchAddress 0 AudioStreaming Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 2 Decoded PCM samples wLockDelay 0x0002 can't get debug descriptor: Resource temporarily unavailable Device Status: 0x0000 (Bus Powered)

2 8

[alsa-devel] ASoC TDM channel re-mapping
by Edward Cragg 17 Jun '25

17 Jun '25

Hi, We have an ASoC driver in which we have added support for TDM over an I2S interface. We would like to have the capability of re-mapping the channel ordering, for which i know there is a callback in place to start this process, set_channel_map. The only backend implementation of this is using the ALSA API and the .copy handler in an ALSA PCM driver to mutate data copied out of ALSA before it's DMA'd to hardware. This is in sound/soc/blackfin/bf5xx-i2s-pcm.c The problem we have is that the driver we're using currently uses a dmaengine based PCM driver, and i'm not sure whether this is compatible with using the .copy callback, without reimplementing the driver entirely as an ALSA PCM driver. Since there aren't very many examples in mainline, I was hoping to ask for advice for the best way of doing this. I wondered: - Would it be possible to add a functional copy callback using a dmaengine based PCM driver? - Otherwise, would there be a good way to implement channel remapping in a TDM frame using the dmaengine based PCM driver? or - Would the best way indeed be to reimplement the PCM driver as a normal ALSA PCM driver? Thanks, Ed Cragg

2 2

[PATCH] ASoC: qcom: soundwire: Add support for controlling audio CGCR from HLOS
by Srinivasa Rao Mandadapu 17 Jun '25

17 Jun '25

Add support for controlling soundwire audio CGCR interface using clock framework to make hclk ungating with software. As per new hardware changes, software has to always ungate hclk if soundwire is operational and keep it running. This requirement is for latest LPASS chipsets for RX, TX and WSA path to work. Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam(a)quicinc.com> Co-developed-by: Venkata Prasad Potturu <quic_potturu(a)quicinc.com> Signed-off-by: Venkata Prasad Potturu <quic_potturu(a)quicinc.com> --- This patch set depends on: -- Clock driver patches with reset control support, yet to be posted. drivers/soundwire/qcom.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index fb183bd..440aad8 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -12,6 +12,7 @@ #include <linux/of_irq.h> #include <linux/of_device.h> #include <linux/regmap.h> +#include <linux/reset.h> #include <linux/slab.h> #include <linux/slimbus.h> #include <linux/soundwire/sdw.h> @@ -129,6 +130,7 @@ struct qcom_swrm_ctrl { struct device *dev; struct regmap *regmap; void __iomem *mmio; + struct reset_control *audio_cgcr; #ifdef CONFIG_DEBUG_FS struct dentry *debugfs; #endif @@ -618,6 +620,8 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl) val = FIELD_PREP(SWRM_MCP_FRAME_CTRL_BANK_ROW_CTRL_BMSK, ctrl->rows_index); val |= FIELD_PREP(SWRM_MCP_FRAME_CTRL_BANK_COL_CTRL_BMSK, ctrl->cols_index); + reset_control_reset(ctrl->audio_cgcr); + ctrl->reg_write(ctrl, SWRM_MCP_FRAME_CTRL_BANK_ADDR(0), val); /* Enable Auto enumeration */ @@ -1269,6 +1273,9 @@ static int qcom_swrm_probe(struct platform_device *pdev) ctrl->bus.ops = &qcom_swrm_ops; ctrl->bus.port_ops = &qcom_swrm_port_ops; ctrl->bus.compute_params = &qcom_swrm_compute_params; + ctrl->audio_cgcr = devm_reset_control_get_exclusive(dev, "swr_audio_cgcr"); + if (IS_ERR(ctrl->audio_cgcr)) + dev_err(dev, "Failed to get audio_cgcr reset required for soundwire-v1.6.0\n"); ret = qcom_swrm_get_port_config(ctrl); if (ret) -- 2.7.4

2 3

[PATCH] ASoC: amd: acp: Fix support for a Huawei Matebook laptop
by Marian Postevca 17 Jun '25

17 Jun '25

Previous commit that added support for Huawei MateBook D16 2021 with Ryzen 4600H (HVY-WXX9 M1010) was incomplete. To activate support for this laptop, the DMI table in acp3x-es83xx machine driver must also be updated. Fixes: b5338b1b901e ("ASoC: amd: acp: Add support for a new Huawei Matebook laptop") Signed-off-by: Marian Postevca <posteuca(a)mutex.one> --- sound/soc/amd/acp/acp3x-es83xx/acp3x-es83xx.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/sound/soc/amd/acp/acp3x-es83xx/acp3x-es83xx.c b/sound/soc/amd/acp/acp3x-es83xx/acp3x-es83xx.c index f85b85ea4be9..2b0aa270a3e9 100644 --- a/sound/soc/amd/acp/acp3x-es83xx/acp3x-es83xx.c +++ b/sound/soc/amd/acp/acp3x-es83xx/acp3x-es83xx.c @@ -354,6 +354,14 @@ static const struct dmi_system_id acp3x_es83xx_dmi_table[] = { }, .driver_data = (void *)(ES83XX_ENABLE_DMIC|ES83XX_48_MHZ_MCLK), }, + { + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "HUAWEI"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "HVY-WXX9"), + DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "M1010"), + }, + .driver_data = (void *)(ES83XX_ENABLE_DMIC), + }, { .matches = { DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "HUAWEI"), -- 2.43.0

2 1

[PATCH 0/1] Swapped l/r channels on ThinkBook 13x Gen4
by MadEnvel 28 May '25

28 May '25

Earlier commits introduced audio support for Lenovo ThinBook 13x Gen 4 that needed a patch due to missing _DSD config. Unfortunately, it looks like the left and right channels in the config are swapped. This patch fixes channel assignment. Tested on Lenovo ThinkBook 13x Gen4. MadEnvel (1): Fix swapped left and right channels for Lenovo ThinBook 13x Gen4 sound sound/pci/hda/cs35l41_hda_property.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) -- 2.45.2

4 4

[PATCH 0/9] ALSA: usb-audio: More fixes / improvements on PCM
by Takashi Iwai 22 Apr '25

22 Apr '25

Hi, this is a patch set for USB-audio to fix and improve the PCM stream handling. The primary target is the enhancement of the low-latency playback that was introduced recently for dealing with the small period size (that is used typically by JACK). There are a few other fixes that are relevant with it. The current patches are found in topic/usb-audio branch of sound.git tree, too. Takashi === Takashi Iwai (9): ALSA: usb-audio: Restrict rates for the shared clocks ALSA: usb-audio: Fix possible race at sync of urb completions ALSA: usb-audio: Rename early_playback_start flag with lowlatency_playback ALSA: usb-audio: Disable low-latency playback for free-wheel mode ALSA: usb-audio: Disable low-latency mode for implicit feedback sync ALSA: usb-audio: Check available frames for the next packet size ALSA: usb-audio: Add spinlock to stop_urbs() ALSA: usb-audio: Improved lowlatency playback support ALSA: usb-audio: Avoid killing in-flight URBs during draining sound/usb/card.h | 11 ++- sound/usb/endpoint.c | 230 +++++++++++++++++++++++++++++++------------ sound/usb/endpoint.h | 13 ++- sound/usb/pcm.c | 157 ++++++++++++++++++++++------- 4 files changed, 305 insertions(+), 106 deletions(-) -- 2.26.2

2 23

[PATCH 00/34] address all -Wunused-const warnings
by Arnd Bergmann 27 Jan '25

27 Jan '25

From: Arnd Bergmann <arnd(a)arndb.de> Compilers traditionally warn for unused 'static' variables, but not if they are constant. The reason here is a custom for C++ programmers to define named constants as 'static const' variables in header files instead of using macros or enums. In W=1 builds, we get warnings only static const variables in C files, but not in headers, which is a good compromise, but this still produces warning output in at least 30 files. These warnings are almost all harmless, but also trivial to fix, and there is no good reason to warn only about the non-const variables being unused. I've gone through all the files that I found using randconfig and allmodconfig builds and created patches to avoid these warnings, with the goal of retaining a clean build once the option is enabled by default. Unfortunately, there is one fairly large patch ("drivers: remove incorrect of_match_ptr/ACPI_PTR annotations") that touches 34 individual drivers that all need the same one-line change. If necessary, I can split it up by driver or by subsystem, but at least for reviewing I would keep it as one piece for the moment. Please merge the individual patches through subsystem trees. I expect that some of these will have to go through multiple revisions before they are picked up, so anything that gets applied early saves me from resending. Arnd Arnd Bergmann (31): powerpc/fsl-soc: hide unused const variable ubsan: fix unused variable warning in test module platform: goldfish: remove ACPI_PTR() annotations i2c: pxa: hide unused icr_bits[] variable 3c515: remove unused 'mtu' variable tracing: hide unused ftrace_event_id_fops Input: synaptics: hide unused smbus_pnp_ids[] array power: rt9455: hide unused rt9455_boost_voltage_values efi: sysfb: don't build when EFI is disabled clk: ti: dpll: fix incorrect #ifdef checks apm-emulation: hide an unused variable sisfb: hide unused variables dma/congiguous: avoid warning about unused size_bytes leds: apu: remove duplicate DMI lookup data iio: ad5755: hook up of_device_id lookup to platform driver greybus: arche-ctrl: move device table to its right location lib: checksum: hide unused expected_csum_ipv6_magic[] sunrpc: suppress warnings for unused procfs functions comedi: ni_atmio: avoid warning for unused device_ids[] table iwlegacy: don't warn for unused variables with DEBUG_FS=n drm/komeda: don't warn for unused debugfs files firmware: qcom_scm: mark qcom_scm_qseecom_allowlist as __maybe_unused crypto: ccp - drop platform ifdef checks usb: gadget: omap_udc: remove unused variable isdn: kcapi: don't build unused procfs code cpufreq: intel_pstate: hide unused intel_pstate_cpu_oob_ids[] net: xgbe: remove extraneous #ifdef checks Input: imagis - remove incorrect ifdef checks sata: mv: drop unnecessary #ifdef checks ASoC: remove incorrect of_match_ptr/ACPI_PTR annotations spi: remove incorrect of_match_ptr annotations drivers: remove incorrect of_match_ptr/ACPI_PTR annotations kbuild: always enable -Wunused-const-variable Krzysztof Kozlowski (1): Input: stmpe-ts - mark OF related data as maybe unused arch/powerpc/sysdev/fsl_msi.c | 2 + drivers/ata/sata_mv.c | 64 +++++++++---------- drivers/char/apm-emulation.c | 5 +- drivers/char/ipmi/ipmb_dev_int.c | 2 +- drivers/char/tpm/tpm_ftpm_tee.c | 2 +- drivers/clk/ti/dpll.c | 10 ++- drivers/comedi/drivers/ni_atmio.c | 2 +- drivers/cpufreq/intel_pstate.c | 2 + drivers/crypto/ccp/sp-platform.c | 14 +--- drivers/dma/img-mdc-dma.c | 2 +- drivers/firmware/efi/Makefile | 3 +- drivers/firmware/efi/sysfb_efi.c | 2 - drivers/firmware/qcom/qcom_scm.c | 2 +- drivers/fpga/versal-fpga.c | 2 +- .../gpu/drm/arm/display/komeda/komeda_dev.c | 8 --- drivers/hid/hid-google-hammer.c | 6 +- drivers/i2c/busses/i2c-pxa.c | 2 +- drivers/i2c/muxes/i2c-mux-ltc4306.c | 2 +- drivers/i2c/muxes/i2c-mux-reg.c | 2 +- drivers/iio/dac/ad5755.c | 1 + drivers/input/mouse/synaptics.c | 2 + drivers/input/touchscreen/imagis.c | 4 +- drivers/input/touchscreen/stmpe-ts.c | 2 +- drivers/input/touchscreen/wdt87xx_i2c.c | 2 +- drivers/isdn/capi/Makefile | 3 +- drivers/isdn/capi/kcapi.c | 7 +- drivers/leds/leds-apu.c | 3 +- drivers/mux/adg792a.c | 2 +- drivers/net/ethernet/3com/3c515.c | 3 - drivers/net/ethernet/amd/xgbe/xgbe-platform.c | 8 --- drivers/net/ethernet/apm/xgene-v2/main.c | 2 +- drivers/net/ethernet/hisilicon/hns_mdio.c | 2 +- drivers/net/wireless/intel/iwlegacy/4965-rs.c | 15 +---- drivers/net/wireless/intel/iwlegacy/common.h | 2 - drivers/platform/goldfish/goldfish_pipe.c | 2 +- drivers/power/supply/rt9455_charger.c | 2 + drivers/regulator/pbias-regulator.c | 2 +- drivers/regulator/twl-regulator.c | 2 +- drivers/regulator/twl6030-regulator.c | 2 +- drivers/rtc/rtc-fsl-ftm-alarm.c | 2 +- drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 2 +- drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 2 +- drivers/spi/spi-armada-3700.c | 2 +- drivers/spi/spi-img-spfi.c | 2 +- drivers/spi/spi-meson-spicc.c | 2 +- drivers/spi/spi-meson-spifc.c | 2 +- drivers/spi/spi-orion.c | 2 +- drivers/spi/spi-pic32-sqi.c | 2 +- drivers/spi/spi-pic32.c | 2 +- drivers/spi/spi-rockchip.c | 2 +- drivers/spi/spi-s3c64xx.c | 2 +- drivers/spi/spi-st-ssc4.c | 2 +- drivers/staging/greybus/arche-apb-ctrl.c | 1 + drivers/staging/greybus/arche-platform.c | 9 +-- drivers/staging/pi433/pi433_if.c | 2 +- drivers/tty/serial/amba-pl011.c | 6 +- drivers/tty/serial/ma35d1_serial.c | 2 +- drivers/usb/gadget/udc/omap_udc.c | 10 +-- drivers/video/fbdev/sis/init301.c | 3 +- kernel/dma/contiguous.c | 2 +- kernel/trace/trace_events.c | 4 ++ lib/checksum_kunit.c | 2 + lib/test_ubsan.c | 2 +- net/sunrpc/cache.c | 10 +-- scripts/Makefile.extrawarn | 1 - sound/soc/atmel/sam9x5_wm8731.c | 2 +- sound/soc/codecs/rt5514-spi.c | 2 +- sound/soc/qcom/lpass-sc7280.c | 2 +- sound/soc/samsung/aries_wm8994.c | 2 +- 69 files changed, 121 insertions(+), 169 deletions(-) -- 2.39.2 Cc: Michael Ellerman <mpe(a)ellerman.id.au> Cc: Christophe Leroy <christophe.leroy(a)csgroup.eu> Cc: Damien Le Moal <dlemoal(a)kernel.org> Cc: Jiri Kosina <jikos(a)kernel.org> Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Cc: Corey Minyard <minyard(a)acm.org> Cc: Peter Huewe <peterhuewe(a)gmx.de> Cc: Jarkko Sakkinen <jarkko(a)kernel.org> Cc: Tero Kristo <kristo(a)kernel.org> Cc: Stephen Boyd <sboyd(a)kernel.org> Cc: Ian Abbott <abbotti(a)mev.co.uk> Cc: H Hartley Sweeten <hsweeten(a)visionengravers.com> Cc: Srinivas Pandruvada <srinivas.pandruvada(a)linux.intel.com> Cc: Len Brown <lenb(a)kernel.org> Cc: "Rafael J. Wysocki" <rafael(a)kernel.org> Cc: John Allen <john.allen(a)amd.com> Cc: Herbert Xu <herbert(a)gondor.apana.org.au> Cc: Vinod Koul <vkoul(a)kernel.org> Cc: Ard Biesheuvel <ardb(a)kernel.org> Cc: Bjorn Andersson <andersson(a)kernel.org> Cc: Moritz Fischer <mdf(a)kernel.org> Cc: Liviu Dudau <liviu.dudau(a)arm.com> Cc: Benjamin Tissoires <benjamin.tissoires(a)redhat.com> Cc: Andi Shyti <andi.shyti(a)kernel.org> Cc: Michael Hennerich <michael.hennerich(a)analog.com> Cc: Peter Rosin <peda(a)axentia.se> Cc: Lars-Peter Clausen <lars(a)metafoo.de> Cc: Jonathan Cameron <jic23(a)kernel.org> Cc: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Cc: Markuss Broks <markuss.broks(a)gmail.com> Cc: Alexandre Torgue <alexandre.torgue(a)foss.st.com> Cc: Lee Jones <lee(a)kernel.org> Cc: Jakub Kicinski <kuba(a)kernel.org> Cc: Shyam Sundar S K <Shyam-sundar.S-k(a)amd.com> Cc: Iyappan Subramanian <iyappan(a)os.amperecomputing.com> Cc: Yisen Zhuang <yisen.zhuang(a)huawei.com> Cc: Stanislaw Gruszka <stf_xl(a)wp.pl> Cc: Kalle Valo <kvalo(a)kernel.org> Cc: Sebastian Reichel <sre(a)kernel.org> Cc: Tony Lindgren <tony(a)atomide.com> Cc: Mark Brown <broonie(a)kernel.org> Cc: Alexandre Belloni <alexandre.belloni(a)bootlin.com> Cc: Xiang Chen <chenxiang66(a)hisilicon.com> Cc: "Martin K. Petersen" <martin.petersen(a)oracle.com> Cc: Neil Armstrong <neil.armstrong(a)linaro.org> Cc: Heiko Stuebner <heiko(a)sntech.de> Cc: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> Cc: Vaibhav Hiremath <hvaibhav.linux(a)gmail.com> Cc: Alex Elder <elder(a)kernel.org> Cc: Jiri Slaby <jirislaby(a)kernel.org> Cc: Jacky Huang <ychuang3(a)nuvoton.com> Cc: Helge Deller <deller(a)gmx.de> Cc: Christoph Hellwig <hch(a)lst.de> Cc: Robin Murphy <robin.murphy(a)arm.com> Cc: Steven Rostedt <rostedt(a)goodmis.org> Cc: Masami Hiramatsu <mhiramat(a)kernel.org> Cc: Andrew Morton <akpm(a)linux-foundation.org> Cc: Kees Cook <keescook(a)chromium.org> Cc: Trond Myklebust <trond.myklebust(a)hammerspace.com> Cc: Anna Schumaker <anna(a)kernel.org> Cc: Masahiro Yamada <masahiroy(a)kernel.org> Cc: Nathan Chancellor <nathan(a)kernel.org> Cc: Takashi Iwai <tiwai(a)suse.com> Cc: linuxppc-dev(a)lists.ozlabs.org Cc: linux-kernel(a)vger.kernel.org Cc: linux-ide(a)vger.kernel.org Cc: openipmi-developer(a)lists.sourceforge.net Cc: linux-integrity(a)vger.kernel.org Cc: linux-omap(a)vger.kernel.org Cc: linux-clk(a)vger.kernel.org Cc: linux-pm(a)vger.kernel.org Cc: linux-crypto(a)vger.kernel.org Cc: dmaengine(a)vger.kernel.org Cc: linux-efi(a)vger.kernel.org Cc: linux-arm-msm(a)vger.kernel.org Cc: linux-fpga(a)vger.kernel.org Cc: dri-devel(a)lists.freedesktop.org Cc: linux-input(a)vger.kernel.org Cc: linux-i2c(a)vger.kernel.org Cc: linux-iio(a)vger.kernel.org Cc: linux-stm32(a)st-md-mailman.stormreply.com Cc: linux-arm-kernel(a)lists.infradead.org Cc: netdev(a)vger.kernel.org Cc: linux-leds(a)vger.kernel.org Cc: linux-wireless(a)vger.kernel.org Cc: linux-rtc(a)vger.kernel.org Cc: linux-scsi(a)vger.kernel.org Cc: linux-spi(a)vger.kernel.org Cc: linux-amlogic(a)lists.infradead.org Cc: linux-rockchip(a)lists.infradead.org Cc: linux-samsung-soc(a)vger.kernel.org Cc: greybus-dev(a)lists.linaro.org Cc: linux-staging(a)lists.linux.dev Cc: linux-serial(a)vger.kernel.org Cc: linux-usb(a)vger.kernel.org Cc: linux-fbdev(a)vger.kernel.org Cc: iommu(a)lists.linux.dev Cc: linux-trace-kernel(a)vger.kernel.org Cc: kasan-dev(a)googlegroups.com Cc: linux-hardening(a)vger.kernel.org Cc: linux-nfs(a)vger.kernel.org Cc: linux-kbuild(a)vger.kernel.org Cc: alsa-devel(a)alsa-project.org Cc: linux-sound(a)vger.kernel.org

7 7

[RESEND PATCH v2] drm/bridge: dw-hdmi-i2s: set insert_pcuv bit if hardware supports it
by Geraldo Nascimento 30 Dec '24

30 Dec '24

Hi Mark, resending this as it failed to apply in my last submission. Added Neil Armstrong to Cc: as hopefully he will be able to better review this. Thanks, Geraldo Nascimento --- Starting with version 2.10a of Synopsys DesignWare HDMI controller the insert_pcuv bit was introduced. On RK3399pro SoM (Radxa Rock Pi N10), for example, if we neglect to set this bit and proceed to enable hdmi_sound and i2s2 on the device tree there will be extreme clipping of sound output, to the point that music sounds like white noise. Problem could also manifest as just mild cracking depending of HDMI audio implementation of sink. Setting insert_pcuv bit (bit 2 of aud_conf2 Audio Sample register) fixes this. Signed-off-by: Geraldo Nascimento <geraldogabriel(a)gmail.com> --- v1->v2: SoC->SoM on description, better commenting, minor style changes, conditional application of fix for L-PCM only --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio-20221017.c +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio-20221017.c @@ -42,6 +42,7 @@ static int dw_hdmi_i2s_hw_params(struct device *dev, void *data, struct dw_hdmi *hdmi = audio->hdmi; u8 conf0 = 0; u8 conf1 = 0; + u8 conf2 = 0; u8 inputclkfs = 0; /* it cares I2S only */ @@ -101,6 +102,28 @@ static int dw_hdmi_i2s_hw_params(struct device *dev, void *data, return -EINVAL; } + /* + * dw-hdmi introduced insert_pcuv bit in + * version 2.10a. + * + * This single bit (bit 2 of HDMI_AUD_CONF2) + * when set to 1 will enable the insertion of the PCUV + * (Parity, Channel Status, User bit and Validity) + * bits on the incoming audio stream. + * + * Support is limited to Linear PCM audio. If + * neglected, the lack of valid PCUV bits + * on L-PCM streams will cause anything from + * mild cracking to full blown extreme + * clipping depending on the HDMI audio + * implementation of the sink. + * + */ + + if (hdmi_read(audio, HDMI_DESIGN_ID) >= 0x21 && + !(hparms->iec.status[0] & IEC958_AES0_NONAUDIO)) + conf2 = HDMI_AUD_CONF2_INSERT_PCUV; + dw_hdmi_set_sample_rate(hdmi, hparms->sample_rate); dw_hdmi_set_channel_status(hdmi, hparms->iec.status); dw_hdmi_set_channel_count(hdmi, hparms->channels); @@ -109,6 +120,7 @@ static int dw_hdmi_i2s_hw_params(struct device *dev, void *data, hdmi_write(audio, inputclkfs, HDMI_AUD_INPUTCLKFS); hdmi_write(audio, conf0, HDMI_AUD_CONF0); hdmi_write(audio, conf1, HDMI_AUD_CONF1); + hdmi_write(audio, conf2, HDMI_AUD_CONF2); return 0; } --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-20221017.h +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-20221017.h @@ -931,6 +931,11 @@ enum { HDMI_AUD_CONF1_WIDTH_16 = 0x10, HDMI_AUD_CONF1_WIDTH_24 = 0x18, +/* AUD_CONF2 field values */ + HDMI_AUD_CONF2_HBR = 0x01, + HDMI_AUD_CONF2_NLPCM = 0x02, + HDMI_AUD_CONF2_INSERT_PCUV = 0x04, + /* AUD_CTS3 field values */ HDMI_AUD_CTS3_N_SHIFT_OFFSET = 5, HDMI_AUD_CTS3_N_SHIFT_MASK = 0xe0,

3 6

[PATCH v4 0/9] ASoC: samsung: midas-audio: Add GPIO-based headset jack detection
by Artur Weber 29 Dec '24

29 Dec '24

Many of Samsung's Exynos 4 devices share the same midas-audio driver to handle the codec setup. While most of these devices, including the Midas itself, use the jack detection provided by the WM8994 driver, other devices such as the Samsung Galaxy Tab 3 8.0 (lt01) use two GPIOs and an ADC channel to determine jack insertion, the jack's type, and button presses (for headsets with volume up/down/play buttons). In the downstream kernel, this behavior is implemented in the sec-jack driver[1], and the per-device settings are configured in *-jack.c files in the mach folder (see e.g. the Tab 3's implementation[2]). This patchset implements this mechanism in the midas_wm1811.c driver, and adds new DTS options to allow for its configuration. It also enables jack detection for the Samsung Galaxy Tab 3 8.0. A very similar mechanism was already present in the aries_wm8994.c driver[3]; this implementation heavily borrows from it, though there are a few extra cleanups as well. Signed-off-by: Artur Weber <aweber.kernel(a)gmail.com> [1] https://github.com/gr8nole/android_kernel_samsung_smdk4x12/blob/lineage-14.… [2] https://github.com/gr8nole/android_kernel_samsung_smdk4x12/blob/lineage-14.… [3] https://github.com/torvalds/linux/blob/master/sound/soc/samsung/aries_wm899… --- Changes in v4: - Replaced manual regulator toggles with SND_SOC_DAPM_REGULATOR_SUPPLY, both for existing mic bias regulators and for the new headset mic bias regulator - Link to v3: https://lore.kernel.org/r/20240519-midas-wm1811-gpio-jack-v3-0-0c1736144c0e… Changes in v3: - Re-added pipe (|) character to samsung,headset-button-threshold-microvolt description to prevent it from being parsed as a mapping (fixes syntax error) - Split out "ASoC: dt-bindings: samsung,midas-audio: Add GPIO-based headset jack detection" into two patches - Link to v2: https://lore.kernel.org/r/20240508-midas-wm1811-gpio-jack-v2-0-b4d36cd02c6e… Changes in v2: - Added vendor prefix to threshold properties - Added separate headset mic bias regulator - Changed some cases of dev_err + return with return dev_err_probe - Added an extra patch to replace some previous dev_err + return cases with dev_err_probe - Moved tab3 DTS wm1811 codec config changes to separate commit --- Artur Weber (9): ASoC: dt-bindings: samsung,midas-audio: Add headset mic bias supply ASoC: dt-bindings: samsung,midas-audio: Add GPIO-based headset jack detection ASoC: samsung: midas_wm1811: Use SND_SOC_DAPM_REGULATOR_SUPPLY for bias regulators ASoC: samsung: midas_wm1811: Add headset mic bias supply support ASoC: samsung: midas_wm1811: Add GPIO-based headset jack detection ASoC: samsung: midas_wm1811: Use dev_err_probe where appropriate ARM: dts: samsung: exynos4212-tab3: Fix headset mic, add jack detection ARM: dts: samsung: exynos4212-tab3: Add MCLK2 clock to WM1811 codec config ARM: dts: samsung: exynos4212-tab3: Drop interrupt from WM1811 codec .../bindings/sound/samsung,midas-audio.yaml | 33 ++ arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi | 31 +- sound/soc/samsung/Kconfig | 2 +- sound/soc/samsung/midas_wm1811.c | 348 +++++++++++++++++---- 4 files changed, 343 insertions(+), 71 deletions(-) --- base-commit: a38297e3fb012ddfa7ce0321a7e5a8daeb1872b6 change-id: 20240502-midas-wm1811-gpio-jack-b10226b17ecc Best regards, -- Artur Weber <aweber.kernel(a)gmail.com>

3 12

hda: how to implement component master_unbind?
by Kai Vehmanen 20 Dec '24

20 Dec '24

Hi Takashi et al, I've been having multiple discussions with our i915 team w.r.t. audio driver behaviour when the aggregate component is unbound, triggered by i915 unbind. This came up again in the recent regression with devres allocations and I now dug into the topic again. In short, I'm puzzled how to really implement this. ALSA (or ASoC) don't really have support for individual components of a card disappearing in a hotplug fashion. At card level, we do have such support (USB, firewire and recent work for PCI hotplug). But not individual components of a card getting unplugged. In current code we have this: static void hdac_component_master_unbind(struct device *dev) { » struct drm_audio_component *acomp = hdac_get_acomp(dev); » if (acomp->audio_ops && acomp->audio_ops->master_unbind) » » acomp->audio_ops->master_unbind(dev, acomp); » module_put(acomp->ops->owner); » component_unbind_all(dev, acomp); » WARN_ON(acomp->ops || acomp->dev); } ... when e.g. i915 driver is unbound (but could be any driver using the component framework, not jus Intel hw), i915 calls component_del() and HDA gets call to the above. After this, acomp ops are null are audio no longer has ability to talk to i915 driver (which makes sense given it's unbound). If audio was runtime suspended, this kind of works (but relies on some good luck). Upon HDA controller resume, we note acomp ops are NULL and HDMI/DP operations (like snd_hdac_display_power()) silently become no-ops. PCM streaming will go to /dev/null, but this is ok'ish since no monitor can be connected anyways. If audio was active, we start to get warnings or worse. Audio expects hw display codec to be powered and programmed, but suddenly it mey lose state. If the audio controller is actually part of the display hardware (e.g. discrete GPUs), then controller registers can stop functioning (they should be still available, but given the main diplay driver is unbound, odds of suprising behaviour are high). So this is less than ideal. I've been looking at options: 1) prevent/block the unbind if audio device is busy The component framework does not allow individual components to return -EBUSY, so there's no way to let others know that unbind is not possible now. This would force anyone testing DRM driver unbind to first unbind the audio driver and stop any active audio use-cases if needed. 2) unbind the ALSA card I've experimented doing a device_unregister() from the above callback, but this has not really worked (onion peeling exercise of new probelms). The code is shared by multiple controllers, so getting a handle to an snd_card object is not straighforward (drvdata is differnet for SOF and snd-hda-intel for instance). But with some new work, maybe we could call snd_card_disconnect() to detach the card and inform user-space. 3) continue as-is and try to fix bugs If audio is active, maybe we could force a acomp->put_power() to ensure a clean unregister of the display part. But this leaves a big chunk of issues especially with HDA controllers that require the display to be powered on, to function. .. Any ideas, and/or has there been prior work? It seems Takashi it's been mostly you who has been active working on the acomp integration recently. I also included Chris, Daniel and Jani who've had patches to hdac_component.c. Br, Kai

3 5

[PATCH] dt-bindings: sound:atmel-at91sam9g20ek: convert bindings to json-schema
by Balakrishnan Sambath 10 Dec '24

10 Dec '24

Convert atmel-at91sam9g20ek-wm8731-audio DT binding to yaml based json-schema.Change file name to match json-scheme naming. Signed-off-by: Balakrishnan Sambath <balakrishnan.s(a)microchip.com> --- .../bindings/sound/atmel,at91sam9g20ek-wm8731.yaml | 60 ++++++++++++++++++++++ .../sound/atmel-at91sam9g20ek-wm8731-audio.txt | 26 ---------- 2 files changed, 60 insertions(+), 26 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/atmel,at91sam9g20ek-wm8731.yaml b/Documentation/devicetree/bindings/sound/atmel,at91sam9g20ek-wm8731.yaml new file mode 100644 index 000000000000..f6330707fe1b --- /dev/null +++ b/Documentation/devicetree/bindings/sound/atmel,at91sam9g20ek-wm8731.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/atmel,at91sam9g20ek-wm8731.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel at91sam9g20ek wm8731 audio complex + +maintainers: + - Balakrishnan Sambath <balakrishnan.s(a)microchip.com> + +properties: + compatible: + const: atmel,at91sam9g20ek-wm8731-audio + + atmel,model: + $ref: /schemas/types.yaml#/definitions/string + description: The user-visible name of this sound complex. + atmel,audio-routing: + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + description: A list of the connections between audio components. + minItems: 2 + items: + enum: + # Board Connectors + - "Ext Spk" + - "Int MIC" + + # CODEC Pins + - LHPOUT + - MICIN + atmel,ssc-controller: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of the SSC controller + atmel,audio-codec: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of WM8731 audio codec + +required: + - compatible + - atmel,model + - atmel,audio-routing + - atmel,ssc-controller + - atmel,audio-codec + +additionalProperties: false + +examples: + - | + sound { + compatible = "atmel,at91sam9g20ek-wm8731-audio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck0_as_mck>; + atmel,model = "wm8731 @ AT91SAMG20EK"; + atmel,audio-routing = + "Ext Spk", "LHPOUT", + "Int MIC", "MICIN"; + atmel,ssc-controller = <&ssc0>; + atmel,audio-codec = <&wm8731>; + }; diff --git a/Documentation/devicetree/bindings/sound/atmel-at91sam9g20ek-wm8731-audio.txt b/Documentation/devicetree/bindings/sound/atmel-at91sam9g20ek-wm8731-audio.txt deleted file mode 100644 index 9c5a9947b64d..000000000000 --- a/Documentation/devicetree/bindings/sound/atmel-at91sam9g20ek-wm8731-audio.txt +++ /dev/null @@ -1,26 +0,0 @@ -* Atmel at91sam9g20ek wm8731 audio complex - -Required properties: - - compatible: "atmel,at91sam9g20ek-wm8731-audio" - - atmel,model: The user-visible name of this sound complex. - - atmel,audio-routing: A list of the connections between audio components. - - atmel,ssc-controller: The phandle of the SSC controller - - atmel,audio-codec: The phandle of the WM8731 audio codec -Optional properties: - - pinctrl-names, pinctrl-0: Please refer to pinctrl-bindings.txt - -Example: -sound { - compatible = "atmel,at91sam9g20ek-wm8731-audio"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pck0_as_mck>; - - atmel,model = "wm8731 @ AT91SAMG20EK"; - - atmel,audio-routing = - "Ext Spk", "LHPOUT", - "Int MIC", "MICIN"; - - atmel,ssc-controller = <&ssc0>; - atmel,audio-codec = <&wm8731>; -}; --- base-commit: 0dd3ee31125508cd67f7e7172247f05b7fd1753a change-id: 20240214-at91sam9g20ek-wm8731-yaml-404ddddbb91a Best regards, -- Balakrishnan Sambath <balakrishnan.s(a)microchip.com>

5 5

[PATCH v2 0/3] ASoC: mediatek:mt8186: fix both the speaker and hdmi
by Jiaxin Yu 06 Dec '24

06 Dec '24

The speaker and hdmi of mt8186 platform are shared the same port of I2S, when connect the external display, use build-in speakers to play audio, they both playback at the same time. So we want to manage the playback device through DAPM events. Change since v1: Support audio function for it6505 bridge to hdmi-codec Jiaxin Yu (3): ASoC: hdmi-codec: Add event handler for hdmi TX ASoC: mediatek: mt8186: correct the HDMI widgets drm/bridge: it6505: Add audio support drivers/gpu/drm/bridge/ite-it6505.c | 81 +++++++++++++++++-- include/sound/hdmi-codec.h | 6 ++ sound/soc/codecs/hdmi-codec.c | 37 ++++++++- .../mt8186/mt8186-mt6366-da7219-max98357.c | 2 +- .../mt8186/mt8186-mt6366-rt1019-rt5682s.c | 2 +- 5 files changed, 116 insertions(+), 12 deletions(-) -- 2.18.0

3 16

[alsa-devel] Error patching file pcm_native.c
by Delusion's Master 20 Nov '24

20 Nov '24

Hi, first of all I apologize in case you receive multiple copies of this message, but I forgot to specify a subject in the original mail. I have a problem compiling the latest alsa driver snapshots. Specifically, it's a problem when patching pcm_native.c: [..] copying file alsa-kernel/core/info.c patching file info.c copying file alsa-kernel/core/pcm.c patching file pcm.c Hunk #3 succeeded at 739 (offset 2 lines). Hunk #5 succeeded at 954 (offset 2 lines). Hunk #7 succeeded at 1045 (offset 2 lines). copying file alsa-kernel/core/pcm_native.c patching file pcm_native.c Hunk #4 succeeded at 1544 (offset -25 lines). Hunk #5 succeeded at 2827 (offset 12 lines). Hunk #6 succeeded at 2878 (offset 10 lines). Hunk #7 FAILED at 2906. Hunk #8 FAILED at 2922. Hunk #9 succeeded at 2915 (offset -23 lines). Hunk #10 succeeded at 3036 (offset 10 lines). Hunk #11 succeeded at 3027 (offset -23 lines). Hunk #12 succeeded at 3074 (offset 10 lines). Hunk #13 succeeded at 3098 (offset -23 lines). Hunk #14 succeeded at 3143 (offset 10 lines). Hunk #15 succeeded at 3124 (offset -23 lines). Hunk #16 succeeded at 3214 (offset 10 lines). Hunk #17 succeeded at 3208 (offset -23 lines). Hunk #18 succeeded at 3271 (offset 10 lines). Hunk #19 succeeded at 3304 (offset -23 lines). Hunk #20 succeeded at 3386 (offset 10 lines). Hunk #21 succeeded at 3411 (offset -23 lines). Hunk #22 succeeded at 3456 (offset 10 lines). Hunk #23 succeeded at 3450 (offset -23 lines). Hunk #24 succeeded at 3525 (offset 10 lines). Hunk #25 succeeded at 3644 (offset -23 lines). 2 out of 25 hunks FAILED -- saving rejects to file pcm_native.c.rej make[2]: *** [pcm_native.c] Error 1 It's some days I get this, but I waited to report this since I thought it could be a temporary problem. My OS is Fedora 11 x86_64. Previous snapshots didn't give me this problem, but I can't say which one broke the compilation, since I usually try updated snapshots only at kernel updates. I searched for this error and the only relevant report I could find is this one: http://mailman.alsa-project.org/pipermail/alsa-devel/2009-April/016420.html a report from last April. What could the problem be? Thanks _________________________________________________________________ Invite your mail contacts to join your friends list with Windows Live Spaces. It's easy! http://spaces.live.com/spacesapi.aspx?wx_action=create&wx_url=/friends.aspx…

3 10

[alsa-devel] [RFC PATCH 00/10] Add support for DMA and audio codec of F1C100s
by Mesih Kilinc 23 Oct '24

23 Oct '24

This is RFC patchset for Allwinner suniv F1C100s to support DMA and audio codec. Allwinner F1C100s has a audio codec that has necessary digital and analog parts. It has r-l headphone output and microphone, line, r-l FM inputs. ADC can capture any inputs and also output channels via mux. Any input channels or DAC samples can feed output channels. Add support for this audio codec. F1C100s utilizes DMA channels to send and receive ADC-DAC samples. So DMA support needed. Patch 1~5 adds support for DMA. Suniv F1C100s has very similar DMA to sun4i. But there is some dissimilarities also. Suniv features a DMA reset bit in clock control unit. It has smaller number of DMA channels. Several registers has different addresses. It's max burst size is 4 instead of 8. Also DMA endpoint numbers are different. Patch 6 adds DMA max burst option to sun4i-codec. Patch 7~8 Add support for suniv F1C100s audio codec. Patch 9 adds audio codec to suniv-f1c100s.dtsi Patch 10 adds audio codec support to Lichee Pi Nano board. Thanks! Mesih Kilinc (10): dma-engine: sun4i: Add a quirk to support different chips dma-engine: sun4i: Add has_reset option to quirk dt-bindings: dmaengine: Add Allwinner suniv F1C100s DMA dma-engine: sun4i: Add support for Allwinner suniv F1C100s ARM: dts: suniv: f1c100s: Add support for DMA ASoC: sun4i-codec: Add DMA Max Burst field dt-bindigs: sound: Add Allwinner suniv F1C100s Audio Codec ASoC: sun4i-codec: Add support for Allwinner suniv F1C100s ARM: dts: suniv: f1c100s: Add support for Audio Codec ARM: dts: suniv: f1c100s: Activate Audio Codec for Lichee Pi Nano .../devicetree/bindings/dma/sun4i-dma.txt | 4 +- .../devicetree/bindings/sound/sun4i-codec.txt | 5 + arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts | 8 + arch/arm/boot/dts/suniv-f1c100s.dtsi | 25 ++ drivers/dma/Kconfig | 4 +- drivers/dma/sun4i-dma.c | 221 ++++++++++-- sound/soc/sunxi/sun4i-codec.c | 371 ++++++++++++++++++++- 7 files changed, 601 insertions(+), 37 deletions(-) -- 2.7.4

5 18

[PATCH v2 0/2] {ASoC,media}: constify snd_soc_component_driver when used as read-only
by Javier Carrasco 01 Oct '24

01 Oct '24

Declare `snd_soc_component_driver` as const to move their declarations to read-only sections for the drivers that do not modify the struct after its declaration. Apart from a single case under media/, the affected drivers are members of the ASoC subsystem. To: Tim Harvey <tharvey(a)gateworks.com> To: Mauro Carvalho Chehab <mchehab(a)kernel.org> To: Liam Girdwood <lgirdwood(a)gmail.com> To: Mark Brown <broonie(a)kernel.org> To: Jaroslav Kysela <perex(a)perex.cz> To: Takashi Iwai <tiwai(a)suse.com> To: Ray Jui <rjui(a)broadcom.com> To: Scott Branden <sbranden(a)broadcom.com> To: Broadcom internal kernel review list <bcm-kernel-feedback-list(a)broadcom.com> To: Shenghao Ding <shenghao-ding(a)ti.com> To: Kevin Lu <kevin-lu(a)ti.com> To: Baojun Xu <baojun.xu(a)ti.com> To: Olivier Moysan <olivier.moysan(a)foss.st.com> To: Arnaud Pouliquen <arnaud.pouliquen(a)foss.st.com> To: Maxime Coquelin <mcoquelin.stm32(a)gmail.com> To: Alexandre Torgue <alexandre.torgue(a)foss.st.com> To: Kunihiko Hayashi <hayashi.kunihiko(a)socionext.com> To: Masami Hiramatsu <mhiramat(a)kernel.org> Cc: linux-media(a)vger.kernel.org Cc: linux-kernel(a)vger.kernel.org Cc: linux-sound(a)vger.kernel.org Cc: linux-arm-kernel(a)lists.infradead.org Cc: alsa-devel(a)alsa-project.org Cc: linux-stm32(a)st-md-mailman.stormreply.com Signed-off-by: Javier Carrasco <javier.carrasco.cruz(a)gmail.com> Changes in v2: - drop cs43130 and sti-sas, as they modifiy the struct in the probe function. - Link to v1: https://lore.kernel.org/r/20240725-const_snd_soc_component_driver-v1-0-3d7e… --- Javier Carrasco (2): media: i2c: tda1997x: constify snd_soc_component_driver struct ASoC: constify snd_soc_component_driver struct drivers/media/i2c/tda1997x.c | 2 +- sound/soc/au1x/dbdma2.c | 2 +- sound/soc/au1x/dma.c | 2 +- sound/soc/bcm/cygnus-pcm.c | 2 +- sound/soc/codecs/cpcap.c | 2 +- sound/soc/codecs/pcm186x.c | 4 ++-- sound/soc/codecs/pcm5102a.c | 2 +- sound/soc/codecs/spdif_receiver.c | 2 +- sound/soc/codecs/spdif_transmitter.c | 2 +- sound/soc/codecs/tas6424.c | 2 +- sound/soc/stm/stm32_adfsdm.c | 2 +- sound/soc/uniphier/evea.c | 2 +- 12 files changed, 13 insertions(+), 13 deletions(-) --- base-commit: 8400291e289ee6b2bf9779ff1c83a291501f017b change-id: 20240725-const_snd_soc_component_driver-b9629a95b948 Best regards, -- Javier Carrasco <javier.carrasco.cruz(a)gmail.com>

2 3

[Patch v5 00/12] Add audio support for LPC32XX CPUs
by Piotr Wojtaszczyk 11 Sep '24

11 Sep '24

This pach set is to bring back audio to machines with a LPC32XX CPU. The legacy LPC32XX SoC used to have audio spport in linux 2.6.27. The support was dropped due to lack of interest from mainaeners. Piotr Wojtaszczyk (12): dt-bindings: dma: pl08x: Add dma-cells description dt-bindings: dma: Add lpc32xx DMA mux binding ASoC: dt-bindings: lpc32xx: Add lpc32xx i2s DT binding ARM: dts: lpc32xx: Use simple-mfd for clock control block ARM: dts: lpc32xx: Add missing dma properties ARM: dts: lpc32xx: Add missing i2s properties clk: lpc32xx: initialize regmap using parent syscon dmaengine: Add dma router for pl08x in LPC32XX SoC ARM: lpc32xx: Remove pl08x platform data in favor for device tree mtd: rawnand: lpx32xx: Request DMA channels using DT entries ASoC: fsl: Add i2s and pcm drivers for LPC32xx CPUs i2x: pnx: Fix potential deadlock warning from del_timer_sync() call in isr .../devicetree/bindings/dma/arm-pl08x.yaml | 7 + .../bindings/dma/nxp,lpc3220-dmamux.yaml | 49 +++ .../bindings/sound/nxp,lpc3220-i2s.yaml | 73 ++++ MAINTAINERS | 20 + arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi | 53 ++- arch/arm/mach-lpc32xx/phy3250.c | 54 --- drivers/clk/Kconfig | 1 + drivers/clk/nxp/clk-lpc32xx.c | 26 +- drivers/dma/Kconfig | 9 + drivers/dma/Makefile | 1 + drivers/dma/lpc32xx-dmamux.c | 195 +++++++++ drivers/i2c/busses/i2c-pnx.c | 48 +-- drivers/mtd/nand/raw/lpc32xx_mlc.c | 26 +- drivers/mtd/nand/raw/lpc32xx_slc.c | 26 +- sound/soc/fsl/Kconfig | 7 + sound/soc/fsl/Makefile | 2 + sound/soc/fsl/lpc3xxx-i2s.c | 375 ++++++++++++++++++ sound/soc/fsl/lpc3xxx-i2s.h | 79 ++++ sound/soc/fsl/lpc3xxx-pcm.c | 72 ++++ 19 files changed, 993 insertions(+), 130 deletions(-) create mode 100644 Documentation/devicetree/bindings/dma/nxp,lpc3220-dmamux.yaml create mode 100644 Documentation/devicetree/bindings/sound/nxp,lpc3220-i2s.yaml create mode 100644 drivers/dma/lpc32xx-dmamux.c create mode 100644 sound/soc/fsl/lpc3xxx-i2s.c create mode 100644 sound/soc/fsl/lpc3xxx-i2s.h create mode 100644 sound/soc/fsl/lpc3xxx-pcm.c -- 2.25.1

7 19

[PATCH] soundwire: stream: fix programming slave ports for non-continous port maps
by Krzysztof Kozlowski 09 Sep '24

09 Sep '24

Two bitmasks in 'struct sdw_slave_prop' - 'source_ports' and 'sink_ports' - define which ports to program in sdw_program_slave_port_params(). The masks are used to get the appropriate data port properties ('struct sdw_get_slave_dpn_prop') from an array. Bitmasks can be non-continuous or can start from index different than 0, thus when looking for matching port property for given port, we must iterate over mask bits, not from 0 up to number of ports. This fixes allocation and programming slave ports, when a source or sink masks start from further index. Fixes: f8101c74aa54 ("soundwire: Add Master and Slave port programming") Cc: <stable(a)vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- drivers/soundwire/stream.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c index 7aa4900dcf31..f275143d7b18 100644 --- a/drivers/soundwire/stream.c +++ b/drivers/soundwire/stream.c @@ -1291,18 +1291,18 @@ struct sdw_dpn_prop *sdw_get_slave_dpn_prop(struct sdw_slave *slave, unsigned int port_num) { struct sdw_dpn_prop *dpn_prop; - u8 num_ports; + unsigned long mask; int i; if (direction == SDW_DATA_DIR_TX) { - num_ports = hweight32(slave->prop.source_ports); + mask = slave->prop.source_ports; dpn_prop = slave->prop.src_dpn_prop; } else { - num_ports = hweight32(slave->prop.sink_ports); + mask = slave->prop.sink_ports; dpn_prop = slave->prop.sink_dpn_prop; } - for (i = 0; i < num_ports; i++) { + for_each_set_bit(i, &mask, 32) { if (dpn_prop[i].num == port_num) return &dpn_prop[i]; } -- 2.43.0

6 15

ASoC: soc-pcm: makes snd_soc_dpcm_can_be_xxx() local function
by Kuninori Morimoto 28 Aug '24

28 Aug '24

Hi Mark No driver is calling snd_soc_dpcm_can_be_xxx() functions. We don't need to have EXPORT_SYMBOL_GPL() for them. This patch-set makes it static function. Thank you for your help !! Best regards --- Kuninori Morimoto

2 4

[PATCH 00/18] ASoC: Intel: boards: updates for 6.11
by Pierre-Louis Bossart 28 Aug '24

28 Aug '24

More simplifications from Brent Lu for Chromebooks, Bard Liao for SoundWire, and support for new Dell SKUs w/ Cirrus Logic codecs added by Charles Keepax. Bard Liao (7): ASoC: Intel: sof_sdw_cs42l42: use dai parameter ASoC: Intel: sof_sdw_rt711: use dai parameter ASoC: Intel: sof_sdw_rt5682: use dai parameter ASoC: Intel: sof_sdw_rt700: use dai parameter ASoC: Intel: sof_sdw_rt_dmic: use from dai parameter ASoC: Intel: sof_sdw_rt_sdca_jack_common: use dai parameter ASoC: Intel: sof_sdw: remove get_codec_dai_by_name Brent Lu (7): ASoC: SOF: sof-audio: rename dai clock setting query function ASoC: SOF: sof-audio: add sof_dai_get_tdm_slots function ASoC: SOF: ipc3-topology: support tdm slot number query ASoC: SOF: ipc4-topology: support tdm slot number query ASoC: Intel: maxim-common: rewrite max_98373_hw_params function ASoC: Intel: sof_da7219: remove local max98373 ops ASoC: Intel: sof_da7219: disable max98373 speaker pins in late_probe Charles Keepax (4): ASoC: Intel: sof_sdw: Add missing controls for cs42l43/cs35l56 ASoC: Intel: soc-acpi: Add match entries for some cs42l43 laptops ASoC: Intel: sof_sdw: Add quirks for some new Dell laptops ASoC: Intel: sof_sdw: Add quirks from some new Dell laptops include/sound/sof.h | 1 + sound/soc/intel/boards/sof_board_helpers.h | 2 - sound/soc/intel/boards/sof_da7219.c | 57 ++------ sound/soc/intel/boards/sof_maxim_common.c | 84 ++++++++++-- sound/soc/intel/boards/sof_sdw.c | 128 +++++++++++++++--- sound/soc/intel/boards/sof_sdw_common.h | 4 - sound/soc/intel/boards/sof_sdw_cs42l42.c | 11 +- sound/soc/intel/boards/sof_sdw_rt5682.c | 11 +- sound/soc/intel/boards/sof_sdw_rt700.c | 11 +- sound/soc/intel/boards/sof_sdw_rt711.c | 11 +- sound/soc/intel/boards/sof_sdw_rt_dmic.c | 14 +- .../boards/sof_sdw_rt_sdca_jack_common.c | 11 +- .../intel/common/soc-acpi-intel-arl-match.c | 50 +++++++ .../intel/common/soc-acpi-intel-rpl-match.c | 50 +++++++ sound/soc/sof/ipc3-topology.c | 14 +- sound/soc/sof/ipc4-topology.c | 14 +- sound/soc/sof/sof-audio.c | 20 ++- sound/soc/sof/sof-audio.h | 9 +- 18 files changed, 338 insertions(+), 164 deletions(-) -- 2.43.0

4 21

[PATCH v7 0/4] ASoC: grace time for DPCM cleanup
by Kuninori Morimoto 28 Aug '24

28 Aug '24

Hi Mark, Pierre-Louis, Jerome Cc each ASoC driver maintainer This is v7 of DPCM cleanup As we discussed in [1], we don't need to use dpcm_playback/capture flag, so we remove it. But we have been using it for 10 years, some driver might get damage. The most likely case is that the device/driver can use both playback/capture, but have only one flag, and not using xxx_only flag. [1/3] patch indicates warning in such case. These adds grace time for DPCM cleanup. I'm not sure when dpcm_xxx will be removed, and Codec check bypass will be error, but maybe v6.12 or v6.13 ? Please check each driver by that time. Previous patch-set try to check both CPU and Codec in DPCM, but we noticed that there are some special DAI which we can't handle today [2]. So I will escape it in this patch-set. [1] https://lore.kernel.org/r/87edaym2cg.wl-kuninori.morimoto.gx@renesas.com [2] https://lore.kernel.org/all/3e67d62d-fe08-4f55-ab5b-ece8a57154f9@linux.inte… Link: https://lore.kernel.org/r/87edaym2cg.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/87wmo6dyxg.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/87msole5wc.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/871q5tnuok.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/87bk4oqerx.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/8734pctmte.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/87r0ctwzr4.wl-kuninori.morimoto.gx@renesas.com v6 -> v7 - based on latest ASoC branch (for-6.12) v5 -> v6 - based on latest ASoC branch v4 -> v5 - typo fix: limition -> limitation - typo fix: catpure -> capture - include Intel patch v3 -> v4 - don't check Codec on DPCM - include Jerome's dpcm_xxx update patch v2 -> v3 - tidyup typo (reuqsts -> requests) - add Tested-by on git-log v1 -> v2 - tidyup Codec check warning output condition Jerome Brunet (1): ASoC: amlogic: do not use dpcm_playback/capture flags Kuninori Morimoto (2): ASoC: soc-pcm: Indicate warning if dpcm_playback/capture were used for availability limition ASoC: remove snd_soc_dai_link_set_capabilities() Pierre-Louis Bossart (1): ASoC: Intel: sof_sdw: use playback/capture_only flags include/sound/soc-dai.h | 1 - include/sound/soc.h | 1 + sound/soc/fsl/imx-card.c | 3 -- sound/soc/generic/audio-graph-card.c | 2 - sound/soc/generic/audio-graph-card2.c | 2 - sound/soc/generic/simple-card.c | 2 - sound/soc/intel/boards/sof_sdw.c | 4 +- sound/soc/meson/axg-card.c | 11 +++-- sound/soc/meson/gx-card.c | 1 - sound/soc/meson/meson-card-utils.c | 4 +- sound/soc/qcom/common.c | 1 - sound/soc/soc-dai.c | 38 ---------------- sound/soc/soc-pcm.c | 65 +++++++++++++++------------ 13 files changed, 47 insertions(+), 88 deletions(-) -- 2.43.0

2 7

[PATCH v6 0/4] ASoC: grace time for DPCM cleanup
by Kuninori Morimoto 28 Aug '24

28 Aug '24

Hi Mark, Pierre-Louis, Jerome Cc each ASoC driver maintainer This is resend of v6 of DPCM cleanup As we discussed in [1], we don't need to use dpcm_playback/capture flag, so we remove it. But we have been using it for 10 years, some driver might get damage. The most likely case is that the device/driver can use both playback/capture, but have only one flag, and not using xxx_only flag. [1/3] patch indicates warning in such case. These adds grace time for DPCM cleanup. I'm not sure when dpcm_xxx will be removed, and Codec check bypass will be error, but maybe v6.12 or v6.13 ? Please check each driver by that time. Previous patch-set try to check both CPU and Codec in DPCM, but we noticed that there are some special DAI which we can't handle today [2]. So I will escape it in this patch-set. [1] https://lore.kernel.org/r/87edaym2cg.wl-kuninori.morimoto.gx@renesas.com [2] https://lore.kernel.org/all/3e67d62d-fe08-4f55-ab5b-ece8a57154f9@linux.inte… Link: https://lore.kernel.org/r/87edaym2cg.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/87wmo6dyxg.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/87msole5wc.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/871q5tnuok.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/87bk4oqerx.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/8734pctmte.wl-kuninori.morimoto.gx@renesas.com v5 -> v6 - based on latest ASoC branch v4 -> v5 - typo fix: limition -> limitation - typo fix: catpure -> capture - include Intel patch v3 -> v4 - don't check Codec on DPCM - include Jerome's dpcm_xxx update patch v2 -> v3 - tidyup typo (reuqsts -> requests) - add Tested-by on git-log v1 -> v2 - tidyup Codec check warning output condition Jerome Brunet (1): ASoC: amlogic: do not use dpcm_playback/capture flags Kuninori Morimoto (2): ASoC: soc-pcm: Indicate warning if dpcm_playback/capture were used for availability limition ASoC: remove snd_soc_dai_link_set_capabilities() Pierre-Louis Bossart (1): ASoC: Intel: sof_sdw: use playback/capture_only flags include/sound/soc-dai.h | 1 - include/sound/soc.h | 1 + sound/soc/fsl/imx-card.c | 3 -- sound/soc/generic/audio-graph-card.c | 2 - sound/soc/generic/audio-graph-card2.c | 2 - sound/soc/generic/simple-card.c | 2 - sound/soc/intel/boards/sof_sdw.c | 4 +- sound/soc/meson/axg-card.c | 11 +++-- sound/soc/meson/gx-card.c | 1 - sound/soc/meson/meson-card-utils.c | 4 +- sound/soc/qcom/common.c | 1 - sound/soc/soc-dai.c | 38 ---------------- sound/soc/soc-pcm.c | 65 +++++++++++++++------------ 13 files changed, 47 insertions(+), 88 deletions(-) -- 2.43.0

2 5

[PATCH v5 0/4] ASoC: grace time for DPCM cleanup
by Kuninori Morimoto 28 Aug '24

28 Aug '24

Hi Mark, Pierre-Louis, Jerome Cc each ASoC driver maintainer This is v5 of DPCM cleanup As we discussed in [1], we don't need to use dpcm_playback/capture flag, so we remove it. But we have been using it for 10 years, some driver might get damage. The most likely case is that the device/driver can use both playback/capture, but have only one flag, and not using xxx_only flag. [1/3] patch indicates warning in such case. These adds grace time for DPCM cleanup. I'm not sure when dpcm_xxx will be removed, and Codec check bypass will be error, but maybe v6.11 or v6.12 ? Please check each driver by that time. Previous patch-set try to check both CPU and Codec in DPCM, but we noticed that there are some special DAI which we can't handle today [2]. So I will escape it in this patch-set. [1] https://lore.kernel.org/r/87edaym2cg.wl-kuninori.morimoto.gx@renesas.com [2] https://lore.kernel.org/all/3e67d62d-fe08-4f55-ab5b-ece8a57154f9@linux.inte… Link: https://lore.kernel.org/r/87edaym2cg.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/87wmo6dyxg.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/87msole5wc.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/871q5tnuok.wl-kuninori.morimoto.gx@renesas.com v4 -> v5 - typo fix: limition -> limitation - typo fix: catpure -> capture - include Intel patch v3 -> v4 - don't check Codec on DPCM - include Jerome's dpcm_xxx update patch v2 -> v3 - tidyup typo (reuqsts -> requests) - add Tested-by on git-log v1 -> v2 - tidyup Codec check warning output condition Jerome Brunet (1): ASoC: amlogic: do not use dpcm_playback/capture flags Kuninori Morimoto (2): ASoC: soc-pcm: Indicate warning if dpcm_playback/capture were used for availability limition ASoC: remove snd_soc_dai_link_set_capabilities() Pierre-Louis Bossart (1): ASoC: Intel: sof_sdw: use playback/capture_only flags include/sound/soc-dai.h | 1 - include/sound/soc.h | 1 + sound/soc/fsl/imx-card.c | 3 -- sound/soc/generic/audio-graph-card.c | 2 - sound/soc/generic/audio-graph-card2.c | 2 - sound/soc/generic/simple-card.c | 2 - sound/soc/intel/boards/sof_sdw.c | 4 +- sound/soc/meson/axg-card.c | 11 +++-- sound/soc/meson/gx-card.c | 1 - sound/soc/meson/meson-card-utils.c | 4 +- sound/soc/qcom/common.c | 1 - sound/soc/soc-dai.c | 38 ---------------- sound/soc/soc-pcm.c | 65 +++++++++++++++------------ 13 files changed, 47 insertions(+), 88 deletions(-) -- 2.43.0

2 9

[PATCH] ASoC: soc-pcm: remove snd_soc_dpcm_stream_lock_irqsave_nested()
by Kuninori Morimoto 21 Aug '24

21 Aug '24

soc-pcm.c has snd_soc_dpcm_stream_lock_irqsave_nested() / snd_soc_dpcm_stream_unlock_irqrestore() helper function, but it is almost nothing help. It just makes a code complex. Let's remove it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> --- sound/soc/soc-pcm.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index 58381801e41d4..4571785736f76 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -49,12 +49,6 @@ static inline int _soc_pcm_ret(struct snd_soc_pcm_runtime *rtd, return ret; } -#define snd_soc_dpcm_stream_lock_irqsave_nested(rtd, stream, flags) \ - snd_pcm_stream_lock_irqsave_nested(snd_soc_dpcm_get_substream(rtd, stream), flags) - -#define snd_soc_dpcm_stream_unlock_irqrestore(rtd, stream, flags) \ - snd_pcm_stream_unlock_irqrestore(snd_soc_dpcm_get_substream(rtd, stream), flags) - #define DPCM_MAX_BE_USERS 8 static inline const char *soc_cpu_dai_name(struct snd_soc_pcm_runtime *rtd) @@ -2144,7 +2138,7 @@ int dpcm_be_dai_trigger(struct snd_soc_pcm_runtime *fe, int stream, be = dpcm->be; be_substream = snd_soc_dpcm_get_substream(be, stream); - snd_soc_dpcm_stream_lock_irqsave_nested(be, stream, flags); + snd_pcm_stream_lock_irqsave_nested(be_substream, flags); /* is this op for this BE ? */ if (!snd_soc_dpcm_be_can_update(fe, be, stream)) @@ -2291,7 +2285,7 @@ int dpcm_be_dai_trigger(struct snd_soc_pcm_runtime *fe, int stream, break; } next: - snd_soc_dpcm_stream_unlock_irqrestore(be, stream, flags); + snd_pcm_stream_unlock_irqrestore(be_substream, flags); if (ret) break; } -- 2.43.0

2 2

[RFC PATCH 00/16] soundwire/ASoC: speed-up downloads with BTP/BRA protocol
by Pierre-Louis Bossart 20 Aug '24

20 Aug '24

This RFC patchset suggests a new API for ASoC codec drivers to use for firmware/table downloads. Problem statement: All existing transfers initiated by codec drivers rely on SoundWire read/write commands, which can only support ONE byte per frame. With the typical 48kHz frame rate, this means 384 kbits/s. In addition, the command/control is typically handled with a FIFO and interrupts which adds more software overhead. To give a practical reference, sending 32Kb takes 2.5s on Intel platforms, which means about 105kbit/s only. Additional non-audio activity is likely to adversely impact interrupt scheduling and further decrease the transfer speeds. New SDCA-based codecs have a need to download tables and DSP firmware which are typically between 20 and 256 Kb. The slow bus operation has a direct impact on boot/resume times, and clearly having to wait more than 300ms is a showstopper in terms of latency requirements and user-experience. Suggested solution: The MIPI specification and most of the new codecs support the Bulk Transfer Protocol (BTP) and specifically the Bulk Register Access (BRA) configuration. This mode reclaims the 'audio' data space of the SoundWire frame to send firmware/coefficients over the DataPort 0 (DP0). The API suggested is rather simple, with the following sequence expected: open(): reserve resources and prepare hardware send_async(): trigger DMAs and perform SoundWire bank switch wait(): wait for DMA completion and disable DMAs close(): release resources Benefits: Even after accounting for the protocol overhead, the data can be sent 8x or 16x faster on the link than with the regular commands. With the use of DMAs, the software overhead becomes limited to the initialization. Measured results show that transferring the same 32Kb takes about 100ms, a 25x improvement on the baseline write() commands with an actual bitrate of 2.6 Mbits/s. These results are a measure of bus/hardware performance mainly, and will typically not be too modified by the CPU activity and scheduling. The performance for reads is similar, with a 25x speedup measured. Limitations: Setting up the transfers over DP0 takes time, and the reliance on DMAs on the host side brings alignment restrictions. The BTP/BRA protocol is really only relevant for "large" transfers done during boot/resume *before* audio transfers take place. Mixing BTP/BRA and audio is a nightmare, this patchset suggests a mutual-exclusion between two usages. Scope: This patchset only exposes the API and a debugfs interface to initiate commands, validate results and measure performance. The actual use of the API is left as an exercise for codec driver developers. This patchset depends on a number of pre-requisite patches and will not build on top of any for-next branches. The main intent of this RFC is to gather comments on the usage, API, benefits and restrictions. The code and functionality was tested on an Intel LunarLake RVP platform connected to a Realtek RT711-SDCA device. Acknowledgements: Thanks to Zeek Tsai at Realtek for providing test sequences that helped reconcile the data formatted by the host driver with the expected results on the code side. Pierre-Louis Bossart (16): Documentation: driver: add SoundWire BRA description soundwire: cadence: add BTP support for DP0 soundwire: stream: extend sdw_alloc_stream() to take 'type' parameter soundwire: extend sdw_stream_type to BPT soundwire: stream: special-case the bus compute_params() routine soundwire: stream: reuse existing code for BPT stream soundwire: bus: add API for BPT protocol soundwire: bus: add bpt_stream pointer soundwire: crc8: add constant table soundwire: cadence: add BTP/BRA helpers to format data soundwire: intel_auxdevice: add indirection for BPT open/close/send_async/wait ASoC: SOF: Intel: hda-sdw-bpt: add helpers for SoundWire BPT DMA soundwire: intel: add BPT context definition soundwire: intel_ace2x: add BPT open/close/send_async/wait soundwire: debugfs: add interface for BPT/BRA transfers ASoC: rt711-sdca: add DP0 support Documentation/driver-api/soundwire/bra.rst | 478 +++++++++++++ Documentation/driver-api/soundwire/index.rst | 1 + Documentation/driver-api/soundwire/stream.rst | 2 +- .../driver-api/soundwire/summary.rst | 5 +- drivers/soundwire/Kconfig | 1 + drivers/soundwire/Makefile | 4 +- drivers/soundwire/amd_manager.c | 2 +- drivers/soundwire/bus.c | 77 +++ drivers/soundwire/bus.h | 18 + drivers/soundwire/cadence_master.c | 646 +++++++++++++++++- drivers/soundwire/cadence_master.h | 30 + drivers/soundwire/crc8.c | 277 ++++++++ drivers/soundwire/crc8.h | 11 + drivers/soundwire/debugfs.c | 122 +++- .../soundwire/generic_bandwidth_allocation.c | 84 ++- drivers/soundwire/intel.h | 12 + drivers/soundwire/intel_ace2x.c | 377 ++++++++++ drivers/soundwire/intel_auxdevice.c | 55 ++ drivers/soundwire/qcom.c | 2 +- drivers/soundwire/stream.c | 137 +++- include/linux/soundwire/sdw.h | 91 ++- include/linux/soundwire/sdw_intel.h | 16 + include/sound/hda-sdw-bpt.h | 76 +++ sound/soc/codecs/rt711-sdca-sdw.c | 8 + sound/soc/qcom/sdw.c | 2 +- sound/soc/sof/intel/Kconfig | 8 +- sound/soc/sof/intel/Makefile | 4 + sound/soc/sof/intel/hda-sdw-bpt.c | 328 +++++++++ 28 files changed, 2810 insertions(+), 64 deletions(-) create mode 100644 Documentation/driver-api/soundwire/bra.rst create mode 100644 drivers/soundwire/crc8.c create mode 100644 drivers/soundwire/crc8.h create mode 100644 include/sound/hda-sdw-bpt.h create mode 100644 sound/soc/sof/intel/hda-sdw-bpt.c -- 2.39.2

4 60

[REGRESSION] ALSA: firewire-lib: heavy digital distortion with Fireface 800
by edmund.raile 20 Aug '24

20 Aug '24

Between the kernel releases 6.9.9 and 6.10.0, something changed that causes heavy digital distortion on playback from at least ALSA and PipeWire. The rhythm of the music is discernable in the output, so it isn't just random noise. It sounds a bit like bitcrushing, but not quite. The generated overtones appear to be dependet on the sample rate. I am sorry I can not be more specific, there are no kernel messages this time. As Mr. Sakamoto recently committed all these changes to firewire he might be able to identify the issue easily, which is why I'd like to ask him to look into it. Kind regards, Edmund Raile. #regzbot introduced: v6.9.9..v6.10

2 1

[PATCH v3 0/8] MSM8953/MSM8976 ASoC support
by Adam Skladowski 20 Aug '24

20 Aug '24

Introduce support for basic sound card setup on MSM8953/MSM8976 platforms, document new compatibles and introduce support for more dais. Most of code is sourced from msm8953-mainline fork over github with some changes implemented by me,some basic changes are mentioned in each patch. Changes since v2 =============== 1. Guarded ioremap on quinary mux with checking if resource is not NULL 2. Introduced compatible based reg overriding in wcd-analog driver 3. Separated PM8950/PM8953 codec patches 4. Moved reg/reg-names back into top-level and rewrote as in comments 5. Separated MSM8953/MSM8976 QDSP6 patches 6. Added Lineout patch [1] - https://lore.kernel.org/lkml/20240723083300.35605-1-krzysztof.kozlowski@lin… Changes since v1 ================ 1. Rebased dt-bindings documentation based on Krzysztof's split patch[1] 2. Resolved clang errors by guarding ret verification inside if 3. Switched quin-iomux to devm_ioremap_resource to not fail on msm8916 Signed-off-by: Adam Skladowski <a39.skl(a)gmail.com> --- Adam Skladowski (4): ASoC: dt-bindings: pm8916-wcd-analog-codec: Document pm8950/pm8953 ASoC: msm8916-wcd-analog: add pm8950 codec ASoC: dt-bindings: apq8016-sbc: Add msm8953/msm8976-qdsp6-sndcard ASoC: qcom: apq8016_sbc: Add support for msm8976 SoC Vladimir Lypak (4): ASoC: qcom: apq8016_sbc.c: Add Quinary support ASoC: msm8916-wcd-analog: add pm8953 codec ASoC: qcom: apq8016_sbc: Add support for msm8953 SoC ASoC: msm8916-wcd-analog: add lineout output .../bindings/sound/qcom,apq8016-sbc-sndcard.yaml | 27 ++++ .../sound/qcom,pm8916-wcd-analog-codec.yaml | 6 +- sound/soc/codecs/msm8916-wcd-analog.c | 145 ++++++++++++++++++++- sound/soc/qcom/apq8016_sbc.c | 88 ++++++++++++- 4 files changed, 257 insertions(+), 9 deletions(-) --- base-commit: 31c2a5c4bf3673b0bf098f358ea931b9ada1e7de change-id: 20240729-msm8953-msm8976-asoc-65f973a13165 Best regards, -- Adam Skladowski <a39.skl(a)gmail.com>

6 21

[PATCH v6 6/7] arm64: dts: imx8m: update spdif sound card node properties
by Elinor Montmasson 19 Aug '24

19 Aug '24

The merge of imx-spdif driver into fsl-asoc-card brought new DT properties that can be used with the "fsl,imx-audio-spdif" compatible: * The "spdif-controller" property from imx-spdif is named "audio-cpu" in fsl-asoc-card. * fsl-asoc-card uses codecs explicitly declared in DT with "audio-codec". With an S/PDIF, codec drivers spdif_transmitter and spdif_receiver should be used. Driver imx-spdif used instead the dummy codec and a pair of boolean properties, "spdif-in" and "spdif-out". While backward compatibility is kept to support properties "spdif-controller", "spdif-in" and "spdif-out", using new properties has several benefits: * "audio-cpu" and "audio-codec" are more generic names reflecting that the fsl-asoc-card driver supports multiple hardware. They are properties already used by devices using the fsl-asoc-card driver. They are also similar to properties of simple-card: "cpu" and "codec". * "spdif-in" and "spdif-out" imply the use of the dummy codec in the driver. However, there are already two codec drivers for the S/PDIF, spdif_transmitter and spdif_receiver. It is better to declare S/PDIF Tx and Rx devices in a DT, and then reference them with "audio-codec" than using the dummy codec. For those reasons, this commit updates in-tree DTs to use the new properties: * Rename "spdif-controller" property to "audio-cpu". * Declare S/PDIF transmitter and/or receiver devices, and use them with the "audio-codec" property instead of "spdif-out" and/or "spdif-in". These modifications were tested only on an imx8mn-evk board. Note that out-of-tree and old DTs are still supported. Signed-off-by: Elinor Montmasson <elinor.montmasson(a)savoirfairelinux.com> --- arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 15 +++++++++--- arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi | 15 +++++++++--- arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 24 +++++++++++++++---- 3 files changed, 43 insertions(+), 11 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi index 90d1901df2b1..348855a41852 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi @@ -180,12 +180,21 @@ cpu { }; }; + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; + + spdif_in: spdif-in { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dir"; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "imx-spdif"; - spdif-controller = <&spdif1>; - spdif-out; - spdif-in; + audio-cpu = <&spdif1>; + audio-codec = <&spdif_out>, <&spdif_in>; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi index 9e0259ddf4bc..6a47e09703a7 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi @@ -124,12 +124,21 @@ sound-wm8524 { "Line Out Jack", "LINEVOUTR"; }; + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; + + spdif_in: spdif-in { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dir"; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "imx-spdif"; - spdif-controller = <&spdif1>; - spdif-out; - spdif-in; + audio-cpu = <&spdif1>; + audio-codec = <&spdif_out>, <&spdif_in>; }; sound-micfil { diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts index 7507548cdb16..b953865f0b46 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts @@ -125,19 +125,33 @@ link_codec: simple-audio-card,codec { }; }; + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; + + spdif_in: spdif-in { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dir"; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "imx-spdif"; - spdif-controller = <&spdif1>; - spdif-out; - spdif-in; + audio-cpu = <&spdif1>; + audio-codec = <&spdif_out>, <&spdif_in>; + }; + + hdmi_arc_in: hdmi-arc-in { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dir"; }; sound-hdmi-arc { compatible = "fsl,imx-audio-spdif"; model = "imx-hdmi-arc"; - spdif-controller = <&spdif2>; - spdif-in; + audio-cpu = <&spdif2>; + audio-codec = <&hdmi_arc_in>; }; }; -- 2.34.1

2 2

[PATCH v11 00/10] spi: Add support for stacked/parallel memories
by Amit Kumar Mahapatra 19 Aug '24

19 Aug '24

This patch series updated the spi-nor, spi core and the AMD-Xilinx GQSPI driver to add stacked and parallel memories support. The first nine patches https://lore.kernel.org/all/20230119185342.2093323-1-amit.kumar-mahapatra@a… https://lore.kernel.org/all/20230310173217.3429788-2-amit.kumar-mahapatra@a… https://lore.kernel.org/all/20230310173217.3429788-3-amit.kumar-mahapatra@a… https://lore.kernel.org/all/20230310173217.3429788-4-amit.kumar-mahapatra@a… https://lore.kernel.org/all/20230310173217.3429788-5-amit.kumar-mahapatra@a… https://lore.kernel.org/all/20230310173217.3429788-6-amit.kumar-mahapatra@a… https://lore.kernel.org/all/20230310173217.3429788-7-amit.kumar-mahapatra@a… https://lore.kernel.org/all/20230310173217.3429788-8-amit.kumar-mahapatra@a… https://lore.kernel.org/all/20230310173217.3429788-9-amit.kumar-mahapatra@a… of the previous series got applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next But the rest of the patches in the series did not get applied as failure was reported for spi driver with GPIO CS, so send the remaining patches in the series after rebasing it on top of for-next branch and fixing the issue. CS GPIO is not tested on our hardware, but it has been tested by @Stefan https://lore.kernel.org/all/005001da1efc$619ad5a0$24d080e0$@opensource.cirr… --- BRANCH: for-next Changes in v11: - Rebased patch series on top of latest for-next branch. - Added a new patch(1/10) to replace spi->chip_select with spi_get_chipselect() call in tps6594-spi.c. - Added a new patch(2/10) to replace spi->chip_select with spi_get_chipseletc() call in cs35l56_hda_spi.c. - In spi.c initialized unused CS[] to 0xff and spi->cs_index_mask to 0x01 in all flows. - Updated spi_dev_check() to compare the CS of old spi device with the new spi device CS. - Updated cover letter description to add information regarding GPIO CS testing and added Stefen's Tested-by tag in 3/10 patch. Changes in v10: - Rebased patch series on top of latest for-next branch and fixed merge conflicts. Changes in v9: - Updated 1/8 patch description to add an high-level overview of parallel(multi-cs) & stacked design. - Initialized all unused CS to 0xFF. - Moved CS check from spi_add_device() to __spi_add_device(). - Updated __spi_add_device() to check to make sure that multiple logical CS don't map to the same physical CS and same physical CS doesn't map to different logical CS. - Updated 1/8, 5/8 & 7/8 to support arbitrary number of flash devices connected in parallel or stacked mode. - Updated documentation for chip_select. - Added a new spi-nor structure member nor->num_flash to keep track of the number of flashes connected. - Added a new patch in the series 4/8 to move write_enable call just before spi_mem ops call in SPI-NOR. - Added comments in SPI core & SPI-NOR. - Rebased the patch series on top of the latest for-next branch. Changes in v8: - Updated __spi_add_device() and spi_set_cs() to fix spi driver failure with GPIO CS. - Rebased the patch series on top of latest for-next branch and fixed merge conflicts. - Updated cover letter description to add information regarding GPIO CS testing and request Stefan to provide his Tested-by tag for 1/7 patch. - Updated 1/7 patch description. Changes in v7: - Updated spi_dev_check() to avoid failures for spi driver GPIO CS and moved the error message from __spi_add_device() to spi_dev_check(). - Resolved code indentation issue in spi_set_cs(). - In spi_set_cs() call spi_delay_exec( ) once if the controller supports multi cs with both the CS backed by GPIO. - Updated __spi_validate()to add checks for both the GPIO CS. - Replaced cs_index_mask bit mask with SPI_CS_CNT_MAX. - Updated struct spi_controller to represent multi CS capability of the spi controller through a flag bit SPI_CONTROLLER_MULTI_CS instead of a boolen structure member "multi_cs_cap". - Updated 1/7 patch description . Changes in v6: - Rebased on top of latest v6.3-rc1 and fixed merge conflicts in spi-mpc512x-psc.c, sfdp.c, spansion.c files and removed spi-omap-100k.c. - Updated spi_dev_check( ) to reject new devices if any one of the chipselect is used by another device. Changes in v5: - Rebased the patches on top of v6.3-rc1 and fixed the merge conflicts. - Fixed compilation warnings in spi-sh-msiof.c with shmobile_defconfig Changes in v4: - Fixed build error in spi-pl022.c file - reported by Mark. - Fixed build error in spi-sn-f-ospi.c file. - Added Reviewed-by: Serge Semin <fancer.lancer(a)gmail.com> tag. - Added two more patches to replace spi->chip_select with API calls in mpc832x_rdb.c & cs35l41_hda_spi.c files. Changes in v3: - Rebased the patches on top of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next - Added a patch to convert spi_nor_otp_region_len(nor) & spi_nor_otp_n_regions(nor) macros into inline functions - Added Reviewed-by & Acked-by tags Changes in v2: - Rebased the patches on top of v6.2-rc1 - Created separate patch to add get & set APIs for spi->chip_select & spi->cs_gpiod, and replaced all spi->chip_select and spi->cs_gpiod references with the API calls. - Created separate patch to add get & set APIs for nor->params. --- Amit Kumar Mahapatra (10): mfd: tps6594: Use set/get APIs to access spi->chip_select ALSA: hda/cs35l56: Use set/get APIs to access spi->chip_select spi: Add multi-cs memories support in SPI core mtd: spi-nor: Convert macros with inline functions mtd: spi-nor: Add APIs to set/get nor->params mtd: spi-nor: Move write enable inside specific write & erase APIs mtd: spi-nor: Add stacked memories support in spi-nor spi: spi-zynqmp-gqspi: Add stacked memories support in GQSPI driver mtd: spi-nor: Add parallel memories support in spi-nor spi: spi-zynqmp-gqspi: Add parallel memories support in GQSPI driver drivers/mfd/tps6594-spi.c | 2 +- drivers/mtd/spi-nor/atmel.c | 17 +- drivers/mtd/spi-nor/core.c | 683 +++++++++++++++++++++++++------ drivers/mtd/spi-nor/core.h | 8 + drivers/mtd/spi-nor/debugfs.c | 4 +- drivers/mtd/spi-nor/gigadevice.c | 4 +- drivers/mtd/spi-nor/issi.c | 11 +- drivers/mtd/spi-nor/macronix.c | 10 +- drivers/mtd/spi-nor/micron-st.c | 35 +- drivers/mtd/spi-nor/otp.c | 48 ++- drivers/mtd/spi-nor/sfdp.c | 33 +- drivers/mtd/spi-nor/spansion.c | 57 +-- drivers/mtd/spi-nor/sst.c | 7 +- drivers/mtd/spi-nor/swp.c | 25 +- drivers/mtd/spi-nor/winbond.c | 2 +- drivers/mtd/spi-nor/xilinx.c | 18 +- drivers/spi/spi-zynqmp-gqspi.c | 58 ++- drivers/spi/spi.c | 259 ++++++++++-- include/linux/mtd/spi-nor.h | 21 +- include/linux/spi/spi.h | 51 ++- sound/pci/hda/cs35l56_hda_spi.c | 2 +- 21 files changed, 1085 insertions(+), 270 deletions(-) -- 2.17.1

10 61

[PATCH v2 0/6] ASoC: codecs: wsa88xx: add support for static port mapping.
by srinivas.kandagatla＠linaro.org 15 Aug '24

15 Aug '24

Existing way of allocating soundwire master ports on Qualcommm platforms is dynamic, and in linear order starting from 1 to MAX_PORTS. This will work as long as soundwire device ports are 1:1 mapped linearly. However on most Qcom SoCs like SM8550, SM8650, x1e80100, these are NOT mapped in that order. The result of this is that only one speaker among the pair of speakers is always silent, With recent changes for WSA codec to support codec versions and along with these patches we are able to get all speakers working on these SoCs. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> --- Changes in v2: - used dev_dbg instead of dev_info - Link to v1: https://lore.kernel.org/r/20240626-port-map-v1-0-bd8987d2b332@linaro.org --- Manikantan R (1): ASoC: dt-bindings: wsa883x: Document port mapping property Srinivas Kandagatla (5): ASoC: codecs: wsa883x: parse port-mapping information ASoC: dt-bindings: wsa8840: Document port mapping property ASoC: codecs: wsa884x: parse port-mapping information arm64: dts: x1e80100-crd: fix wsa soundwire port mapping arm64: dts: x1e80100-qcp: fix wsa soundwire port mapping Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml | 8 ++++++++ Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml | 8 ++++++++ arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 4 ++++ arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 2 ++ sound/soc/codecs/wsa883x.c | 8 ++++++++ sound/soc/codecs/wsa884x.c | 8 ++++++++ 6 files changed, 38 insertions(+) --- base-commit: 9935be184a55dd84fc3275094f2df095491f6ea1 change-id: 20240626-port-map-ef50c3304d4a Best regards, -- Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org>

5 10

[PATCH v11] ALSA: hda/tas2781: Add tas2781 hda SPI driver
by Baojun Xu 15 Aug '24

15 Aug '24

This patch was used to add TAS2781 devices on SPI support in sound/pci/hda. It use ACPI node descript about parameters of TAS2781 on SPI, it like: Scope (_SB.PC00.SPI0) { Device (GSPK) { Name (_HID, "TXNW2781") // _HID: Hardware ID Method (_CRS, 0, NotSerialized) { Name (RBUF, ResourceTemplate () { SpiSerialBusV2 (...) SpiSerialBusV2 (...) } } } } And in platform/x86/serial-multi-instantiate.c, those spi devices will be added into system as a single SPI device, so TAS2781 SPI driver will probe twice for every single SPI device. And driver will also parser mono DSP firmware binary and RCA binary for itself. The code support Realtek as the primary codec. In patch version-10, add multi devices firmware binary support, to compatble with windows driver, they can share same firmware binary. Signed-off-by: Baojun Xu <baojun.xu(a)ti.com> --- v11: - Define config number for pre-reset and post-reset scripts. - Remove acpi_subsystem_id as it was not used. - Change variables order in structure, to avoid possible memory holes. - Remove pre-reset and post-reset scripts in reset function. - Change variables name to more common. - Add pre-reset and post-reset scripts in fw_ready. - Add empty line after end of function. - Remove reset function before fw ready. - Add result check for tasdevice_spi_prmg_load(). - Return real result of tasdevice_load_block_kernel(). - Change code for ppcver check, and update debug message. - Remove load_calib_data() as no calibration data in firmware now. - Remove tasdevice_spi_select_tuningprm_cfg() as config will be forced downloaded after program download. - Change comments for tasdevice_spi_tuning_switch(). - Remove unnecessary brace. v10: - Remove project id 103c8b93 in Patch_realtek.c, as it was used for test only, offcial project id is 103c8daa (Gemtree). - Add TAS2781_REG_CLK_CONFIG for check if AMP has been reset. - Add table for pre-reset and post-reset. - Perform pre-reset config before reset AMP. - Perform post-reset config after reset AMP. - Fix wrong offset in calibration data issue. - Remove tuning switch after firmware download. - Force stop play in runtime suspend. - Apply patch for component change in bind & unbind. - Remove program download and calibration data apply, switch tuning only in runtime resume. - Check if AMP has reseted in system resume, and do firmware download and calibration data apply. - Change flag 0xCx to 0x8x for coeff data force download. - Add device index for multi device firmware binary file compatible. - Check device index before registers write during firmware download. - Force config data download after program download. - Remove config download in tuning switch. v9: - Add parentheses for variables in micro define. - Add define for calibration registers address identify. - Change variable name from calibration_data to cali_data. - Add variable for calibration registers address in struct tasdevice_priv. - Change format for alignment to parentheses. - Remove tas2781_reg_defaults as it will be over write in firmware download. - Remove RESET for second device in tas2781_spi_reset(), as it will cause no sound on second device. - Add calibration registers address initial in tasdevice_spi_init(). - Remove unnecessary parentheses. - Remove exception in tas2781_hda_playback_hook(). - Remove hard code for calibration registers address. - Add support for calibration data format V3 for registers address identify, as new firmware tool will define calibration registers address dynamic, so can't hard code it, need read it from BIOS with calibration data. - Remove some debug print. - Change hard code value (3) to ARRAY_SIZE(tas2781_snd_controls)/2. - New patch apply for change position of component_del(). - Change label from out, out1 to config_err and block_err. - Remove unnecessary parentheses in tas2781_spi_fwlib.c. - Remove tasdevice_spi_prmg_calibdata_load(). v8: - Move *-y position in sound/pci/hda/Makefile. - Change + to | for bit operation in macro define. - Change TASDEVICE_Checksum to TASDEVICE_CHECKSUM. v7: - Add new project Gemtree (0x103c8daa) support for tas2781 spi driver. v6: - Remove client in tasdevice_priv struct as it was not used. - Change format for tasdevice_spi_dev_write() in tas2781_hda_spi.c. - Change update bits function to read & write mode, as tas2781 use last bit to mask read & write, it cause regmap_update_bits work not as our expected. - Add element in tas2781_snd_controls, tas2781_prof_ctrl, tas2781_dsp_conf_ctrl, to support second device. Previous version add sound card for first index only. - Change calibration registers address declaire to TASDEVICE_REG() mode. - Add snd_ctl_new1() for second device. - Change format for tas2781_hda_unbind() to fit 79 chars in one line. - Remove client for spi as it was not used. - Remove unused variables. - Remove cur_prog clean in runtime_suspend(). - Remove unused variables. - Add tasdevice_spi_tuning_switch() in runtime_resume. - Remove cur_prog clean in system_resume(). - Add tuning switch if playback started in system_resume(). - Change TASDEVICE_PAGE_REG to TASDEVICE_REG_ID in tas2781_spi_fwlib.c. - Remove calibration binary load functions as data will be loaded from EFI. v5: - Combined all modification into one patch for pass the compile. - Remove old hardware id "TIAS2781" as no production on market. - Change max page size to 256 in tas2781-spi.h. - Change book reg from 127 to GENMASK(7, 1), as one bit shift is needed. - Change register address define as one bit shift needed for offset. - Change block check sum comments to Firmware block from I2C. - Change define of (page + reg) to TASDEVICE_PAGE_REG from TASDEVICE_PGRG. - Change to lower case in defined value. - Add registers default value table in tas2781_hda_spi.c - Change rang_max to 256 * 256. - Add zero_flag_mask in regmap_config. - Change max_register to 256 * 256. - Add registers default table into structure regmap_config. - Change parameter from book number to whole register address. - Remove page 0 switch as SPI driver will do it. - Add bit(0) for read function as tas2781 will check last bit of address, to determine operation mode is read (1) or write (0). - Change switch case to if check in tas2781_hda_playback_hook(), as it may cause compile problem in clang-19 building. - Change variable declaration position. - Change order in if check. - Remove old hardware id ("TIAS2781") support. - Remove debug message in runtime suspend and resume. - Remove regmap.h include in tas2781_spi_fwlib.c. - Remove MODULE_ in fwlib as this file will work with tas2781_hda_spi.c only. v4: - Add old hardware id "TIAS2781" for compatible with old production - Add 2 devices in struct smi_node tas2781_hda, to compatible with 4 AMPs v4: - Add old hardware id "TIAS2781" for compatible with old production - Add 2 devices in struct smi_node tas2781_hda, to compatible with 4 AMPs - Move include of sound/tas2781-dsp.h to c source file tas2781_hda_spi.c, tas2781_spi_fwlib.c, as it's not needed in header file tas2781-spi.h - Use page and book number define in other micro define - Change 4000000 to (4 * HZ_PER_MHZ) - Add define for calibration variable name and size in UEFI. - Remove structure tasdevice & tasdevice_irqinfo, and move variables in to structure tasdevice_priv - Remove some unused variables in sttructure tasdevice_priv - Remove function declare of tascodec_init(), use tascodec_spi_init() - Remove function declare of tasdevice_remove() - Add array_size.h included in tas2781_hda_spi.c - Add cleanup.h included for change mutex to guard - Add units.h included - Include tas2781-dsp.h - Remove unused variables in tas2781_hda structure - Change 0xff to GENMASK(7, 0) - Change 128 to define of max page size - Change code as all variables was moved to tasdevice_priv structure - Change comments for error in book write, or page write - Remove initial of ret, and return 0 directly - Change comments for wrong typo, add space in front and end - Add check for bulk read, max size should be a page size - Change usleep_rang() to fsleep() - Change mutex_lock to guard(mutex), and remove mutex_unlock() - Change tasdevice_spi_init() to void from int as no value return required - Change second parameter to sizeof - Remove tasdevice_clamp(), use clamp() - Add compatible with old hardware id "TIAS2781" - Remove cs_gpio and spi device in tas2781_read_acpi() as use default CS - Change dev-index check, return -EINVAL if it's <= 0 - Change 0xFF to U8_MAX - Remove GPIO get for chip-select, use default from SPI device - Perform RESET in first AMP only as all AMPs share same RESET pin - return 0 directly in some simple routine to avoid variable initial - Change comments for function which was used by system - Change "ON" "OFF" to function str_on_off(...) - Change format of GUID - Add temp buffer for first efi.get_variable() - Free data if it was allocated - Change format of debug message of calibration date time print - Remove total_sz = 0, as it's not needed - Move save_calibration to after tuning_switch to avoid calibration data overwrite - Remove dev from structure tasdevice_hda, use dev in tasdevice_priv - Remove 0 from { "tas2781-hda", 0}, & {"TXNW2781", 0}, - Add old hardware id "TIAS2781" for compatible with old production - Add 2 devices in struct smi_node tas2781_hda, to compatible with 4 AMPs v3: - Move HID up to above /* Non-conforming _HID ... */ in scan.c, for avoid misunderstanding. - Move HID up to above /* Non-conforming _HID ... */ in serial-multi-instantiate.c, for avoid misunderstanding. - Change objs to y for snd-hda-scodec-tas2781-spi- in Makefile. - Change format for some define in tas2781-spi.h. - Add define for TASDEVICE_MAX_BOOK_NUM, TASDEVICE_MAX_PAGE. - Move declare of "enum calib_data {" to header file from source file. - Remove "enum device_catlog_id {" as only one platform was supported now. - Remove "struct calidata", as we will save pure calibration data only. - Remove "struct calidata", "enum device_catlog_id" in tasdevice_priv. - Add calibration_data in tasdevice_priv to save pure calibration data. - Remove declare of tasdevice_save_calibration() and tasdevice_apply_calibration(), as it will be used within same c file. - Add below header files included in tas2781_hda_spi.c: bits.h, mutex.h, property.h, time.h, types.h. - Move two micro define to header file tas2781-spi.h. - Change format of some micro define. - Change format of some structure. - Remove irq in tas2781_hda, as have it already in tasdevice_priv. - Remove some local functions declare as not necessarily. - Return error if regmap_write() failed. - Change fixed value 2 to sizeof(data). - Remove all of EXPORT_SYMBOL_GPL, as all of function was called within same module. - Remove empty line after last return in some functions. - Remove some variable initialyzation. - Remove variable sub, store acpi_subsystem_id directly. - Remove wrong comments for device index, it's must, can't be NULL. - Remove some local variables, use elements in structure directly. - Append commas in last element of an array. - Change calibration data process, didn't save all of calibration data in EFI, get in local, and save pure calibration data in tasdevice_priv. - Call tasdevice_save_calibration() from function pointer in tasdevice_priv; - Remove subid as one platform was supported only, needn't check. - Add initialyzation for local variable. - Move regmap initialyzation to before acpi read. - Call tasdevice_apply_calibration() from function pointer in tasdevice_priv; - Remove MODULE_IMPORT_NS(SND_SOC_TAS2781_FMWLIB), as all functions was performed within same module. - Update format and variables declare order. - Change format of multi conditions for if. - Remove casting which is not needed. - Change variables type to avoid casting. - Remove Unneeded parentheses. - Change if check to avoid goto. - Add {} for keep same style. - Remove some local variables, use elements in structure directly. v2: - Change depends on SPI to SPI_MASTER in sound/pci/hda/Kconfig - Add select SND_HDA_SCODEC_COMPONENT in sound/pci/hda/Kconfig - Change comp_generic_fixup() 5th parameter from "-%s:00" to "-%s:00-tas2781-hda.%d" in sound/pci/hda/patch_realtek.c - Change chain_id from ALC285_FIXUP_THINKPAD_HEADSET_JACK to ALC285_FIXUP_HP_GPIO_LED in sound/pci/hda/patch_realtek.c - Remove project name "Gemtree" - Update information in file header of tas2781-spi.h. - Remove useless micro define. - Change TASDEVICE_I2CChecksum to TASDEVICE_Checksum - Remove enum control_bus as current code support SPI only. - Remove device define as current code support TAS2781 only. - Remove spi_device **spi_devs in structure tasdevice_priv. - Remove cal_binaryname in structure tasdevice_priv. - Remove ndev in structure tasdevice_priv. - Change isacpi and isspi, replace by control_bus(I2C or SPI). - Remove void tasdevice_spi_dsp_remove(void *context). - Add acpi_device and irq in structure tas2781_hda in tas2781_hda_spi.c. - Remove parameter chn in all of registers access functions. - Add tascodec_spi_init(). - Add chip select gpio set for SPI device. - Change tasdevice_tuning_switch() to tasdevice_spi_tuning_switch(). - Change device offset from tas_priv->ndev to tas_priv->index. - Change tasdevice_dsp_remove() to tasdevice_spi_dsp_remove(). - tasdevice_prmg_load() to tasdevice_spi_prmg_load(). - Change tasdevice_config_info_remove() to tasdevice_spi_config_info_remove(). - Add one dummy byte shift when read from page 2~127, or not book 0. - Change tasdevice_spi_change_chn_book() to tasdevice_spi_switch_book() - Perform put_device(physdev) before error return. - Change calibration data id to 2781 from 2783 in EFI - Change calibration data structure name in comments. - Remove file name in tas2781_spi_fwlib.c. - Remove #include <linux/i2c.h> as it not needed in SPI mode. - Change TAB to speace in micro define in tas2781_spi_fwlib.c. - Change to up-case for DSP. - Change all of multi-line comments format, empty first line. - Change all of sizeof(struct xx) to sizeof(*xx). - Remove Explicit casting for variables compare to avoid possible fault. - Return directly without goto. - Change 1 << xx to BIT(xx). - Remove deviceNumber[] as current SPI device will support one device only. - Add memory free before return error. - Change "buf[offset]; offset += 1" to buf[offset++]. - Remove some debug information print. - Change firmware binary to single device mode. - Change all bexx_to_cpup() to get_unaligned_bexx(). - Remove ndev process as current SPI device support single device only. - Remove chn and chnend for single device support only. - Change all of registers read/write function, remove parameter chn. - Create new function for single write, burst write, delay, field write in tasdevice_process_block(). --- drivers/acpi/scan.c | 1 + .../platform/x86/serial-multi-instantiate.c | 12 + sound/pci/hda/Kconfig | 14 + sound/pci/hda/Makefile | 2 + sound/pci/hda/patch_realtek.c | 13 + sound/pci/hda/tas2781-spi.h | 158 ++ sound/pci/hda/tas2781_hda_spi.c | 1273 +++++++++++ sound/pci/hda/tas2781_spi_fwlib.c | 2007 +++++++++++++++++ 8 files changed, 3480 insertions(+) create mode 100644 sound/pci/hda/tas2781-spi.h create mode 100644 sound/pci/hda/tas2781_hda_spi.c create mode 100644 sound/pci/hda/tas2781_spi_fwlib.c diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 59771412686b..b1a8bf1043da 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -1769,6 +1769,7 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device) {"CSC3557", }, {"INT33FE", }, {"INT3515", }, + {"TXNW2781", }, /* Non-conforming _HID for Cirrus Logic already released */ {"CLSA0100", }, {"CLSA0101", }, diff --git a/drivers/platform/x86/serial-multi-instantiate.c b/drivers/platform/x86/serial-multi-instantiate.c index 3be016cfe601..b15c819023d0 100644 --- a/drivers/platform/x86/serial-multi-instantiate.c +++ b/drivers/platform/x86/serial-multi-instantiate.c @@ -368,6 +368,17 @@ static const struct smi_node cs35l57_hda = { .bus_type = SMI_AUTO_DETECT, }; +static const struct smi_node tas2781_hda = { + .instances = { + { "tas2781-hda", IRQ_RESOURCE_AUTO, 0 }, + { "tas2781-hda", IRQ_RESOURCE_AUTO, 0 }, + { "tas2781-hda", IRQ_RESOURCE_AUTO, 0 }, + { "tas2781-hda", IRQ_RESOURCE_AUTO, 0 }, + {} + }, + .bus_type = SMI_AUTO_DETECT, +}; + /* * Note new device-ids must also be added to ignore_serial_bus_ids in * drivers/acpi/scan.c: acpi_device_enumeration_by_parent(). @@ -380,6 +391,7 @@ static const struct acpi_device_id smi_acpi_ids[] = { { "CSC3556", (unsigned long)&cs35l56_hda }, { "CSC3557", (unsigned long)&cs35l57_hda }, { "INT3515", (unsigned long)&int3515_data }, + { "TXNW2781", (unsigned long)&tas2781_hda }, /* Non-conforming _HID for Cirrus Logic already released */ { "CLSA0100", (unsigned long)&cs35l41_hda }, { "CLSA0101", (unsigned long)&cs35l41_hda }, diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig index bb15a0248250..62cd9ba408e2 100644 --- a/sound/pci/hda/Kconfig +++ b/sound/pci/hda/Kconfig @@ -206,6 +206,20 @@ config SND_HDA_SCODEC_TAS2781_I2C comment "Set to Y if you want auto-loading the side codec driver" depends on SND_HDA=y && SND_HDA_SCODEC_TAS2781_I2C=m +config SND_HDA_SCODEC_TAS2781_SPI + tristate "Build TAS2781 HD-audio side codec support for SPI Bus" + depends on SPI_MASTER + depends on ACPI + depends on EFI + depends on SND_SOC + select CRC32_SARWATE + help + Say Y or M here to include TAS2781 SPI HD-audio side codec support + in snd-hda-intel driver, such as ALC287. + +comment "Set to Y if you want auto-loading the side codec driver" + depends on SND_HDA=y && SND_HDA_SCODEC_TAS2781_SPI=m + config SND_HDA_CODEC_REALTEK tristate "Build Realtek HD-audio codec support" select SND_HDA_GENERIC diff --git a/sound/pci/hda/Makefile b/sound/pci/hda/Makefile index 80210f845df2..210c406dfbc5 100644 --- a/sound/pci/hda/Makefile +++ b/sound/pci/hda/Makefile @@ -40,6 +40,7 @@ snd-hda-scodec-cs35l56-spi-y := cs35l56_hda_spi.o snd-hda-cs-dsp-ctls-y := hda_cs_dsp_ctl.o snd-hda-scodec-component-y := hda_component.o snd-hda-scodec-tas2781-i2c-y := tas2781_hda_i2c.o +snd-hda-scodec-tas2781-spi-y := tas2781_hda_spi.o tas2781_spi_fwlib.o # common driver obj-$(CONFIG_SND_HDA) := snd-hda-codec.o @@ -72,6 +73,7 @@ obj-$(CONFIG_SND_HDA_SCODEC_CS35L56_SPI) += snd-hda-scodec-cs35l56-spi.o obj-$(CONFIG_SND_HDA_CS_DSP_CONTROLS) += snd-hda-cs-dsp-ctls.o obj-$(CONFIG_SND_HDA_SCODEC_COMPONENT) += snd-hda-scodec-component.o obj-$(CONFIG_SND_HDA_SCODEC_TAS2781_I2C) += snd-hda-scodec-tas2781-i2c.o +obj-$(CONFIG_SND_HDA_SCODEC_TAS2781_SPI) += snd-hda-scodec-tas2781-spi.o # this must be the last entry after codec drivers; # otherwise the codec patches won't be hooked before the PCI probe diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index ba0ce8750ca4..996e930b4cef 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6926,6 +6926,11 @@ static void tas2781_fixup_i2c(struct hda_codec *cdc, comp_generic_fixup(cdc, action, "i2c", "TIAS2781", "-%s:00", 1); } +static void tas2781_fixup_spi(struct hda_codec *cdc, const struct hda_fixup *fix, int action) +{ + comp_generic_fixup(cdc, action, "spi", "TXNW2781", "-%s:00-tas2781-hda.%d", 2); +} + static void yoga7_14arb7_fixup_i2c(struct hda_codec *cdc, const struct hda_fixup *fix, int action) { @@ -7504,6 +7509,7 @@ enum { ALC236_FIXUP_DELL_DUAL_CODECS, ALC287_FIXUP_CS35L41_I2C_2_THINKPAD_ACPI, ALC287_FIXUP_TAS2781_I2C, + ALC245_FIXUP_TAS2781_SPI_2, ALC287_FIXUP_YOGA7_14ARB7_I2C, ALC245_FIXUP_HP_MUTE_LED_COEFBIT, ALC245_FIXUP_HP_X360_MUTE_LEDS, @@ -9733,6 +9739,12 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id = ALC285_FIXUP_THINKPAD_HEADSET_JACK, }, + [ALC245_FIXUP_TAS2781_SPI_2] = { + .type = HDA_FIXUP_FUNC, + .v.func = tas2781_fixup_spi, + .chained = true, + .chain_id = ALC285_FIXUP_HP_GPIO_LED, + }, [ALC287_FIXUP_YOGA7_14ARB7_I2C] = { .type = HDA_FIXUP_FUNC, .v.func = yoga7_14arb7_fixup_i2c, @@ -10270,6 +10282,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x8cdf, "HP SnowWhite", ALC287_FIXUP_CS35L41_I2C_2_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x8ce0, "HP SnowWhite", ALC287_FIXUP_CS35L41_I2C_2_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x8cf5, "HP ZBook Studio 16", ALC245_FIXUP_CS35L41_SPI_4_HP_GPIO_LED), + SND_PCI_QUIRK(0x103c, 0x8daa, "HP Gemtree", ALC245_FIXUP_TAS2781_SPI_2), SND_PCI_QUIRK(0x1043, 0x103e, "ASUS X540SA", ALC256_FIXUP_ASUS_MIC), SND_PCI_QUIRK(0x1043, 0x103f, "ASUS TX300", ALC282_FIXUP_ASUS_TX300), SND_PCI_QUIRK(0x1043, 0x106d, "Asus K53BE", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), diff --git a/sound/pci/hda/tas2781-spi.h b/sound/pci/hda/tas2781-spi.h new file mode 100644 index 000000000000..ecfc3c8bb821 --- /dev/null +++ b/sound/pci/hda/tas2781-spi.h @@ -0,0 +1,158 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +// +// ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier +// +// Copyright (C) 2024 Texas Instruments Incorporated +// https://www.ti.com +// +// The TAS2781 driver implements a flexible and configurable +// algo coefficient setting for TAS2781 chips. +// +// Author: Baojun Xu <baojun.xu(a)ti.com> +// + +#ifndef __TAS2781_SPI_H__ +#define __TAS2781_SPI_H__ + +#define TASDEVICE_RATES \ + (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | \ + SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_88200) + +#define TASDEVICE_FORMATS \ + (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE | \ + SNDRV_PCM_FMTBIT_S32_LE) + +#define TASDEVICE_MAX_BOOK_NUM 256 +#define TASDEVICE_MAX_PAGE 256 + +#define TASDEVICE_MAX_SIZE (TASDEVICE_MAX_BOOK_NUM * TASDEVICE_MAX_PAGE) + +/* PAGE Control Register (available in page0 of each book) */ +#define TASDEVICE_PAGE_SELECT 0x00 +#define TASDEVICE_BOOKCTL_PAGE 0x00 +#define TASDEVICE_BOOKCTL_REG GENMASK(7, 1) +#define TASDEVICE_BOOK_ID(reg) (((reg) & GENMASK(24, 16)) >> 16) +#define TASDEVICE_PAGE_ID(reg) (((reg) & GENMASK(15, 8)) >> 8) +#define TASDEVICE_REG_ID(reg) (((reg) & GENMASK(7, 1)) >> 1) +#define TASDEVICE_PAGE_REG(reg) ((reg) & GENMASK(15, 1)) +#define TASDEVICE_REG(book, page, reg) \ + (((book) << 16) | ((page) << 8) | ((reg) << 1)) + +/* Software Reset */ +#define TAS2781_REG_SWRESET TASDEVICE_REG(0x0, 0x0, 0x01) +#define TAS2781_REG_SWRESET_RESET BIT(0) + +/* System Reset Check Register */ +#define TAS2781_REG_CLK_CONFIG TASDEVICE_REG(0x0, 0x0, 0x5c) +#define TAS2781_REG_CLK_CONFIG_RESET (0x19) +#define TAS2781_PRE_POST_RESET_CFG 3 + +/* Block Checksum */ +#define TASDEVICE_CHECKSUM TASDEVICE_REG(0x0, 0x0, 0x7e) + +/* Volume control */ +#define TAS2781_DVC_LVL TASDEVICE_REG(0x0, 0x0, 0x1a) +#define TAS2781_AMP_LEVEL TASDEVICE_REG(0x0, 0x0, 0x03) +#define TAS2781_AMP_LEVEL_MASK GENMASK(5, 1) + +#define TASDEVICE_CMD_SING_W 0x1 +#define TASDEVICE_CMD_BURST 0x2 +#define TASDEVICE_CMD_DELAY 0x3 +#define TASDEVICE_CMD_FIELD_W 0x4 + +#define TAS2781_SPI_MAX_FREQ (4 * HZ_PER_MHZ) + +#define TASDEVICE_CRC8_POLYNOMIAL 0x4d +#define TASDEVICE_SPEAKER_CALIBRATION_SIZE 20 + +/* Flag of calibration registers address. */ +#define TASDEVICE_CALIBRATION_REG_ADDRESS BIT(7) + +#define TASDEVICE_CALIBRATION_DATA_NAME L"CALI_DATA" +#define TASDEVICE_CALIBRATION_DATA_SIZE 256 + +enum calib_data { + R0_VAL = 0, + INV_R0, + R0LOW, + POWER, + TLIM, + CALIB_MAX +}; + +struct tasdevice_priv { + struct tasdevice_fw *cali_data_fmw; + struct tasdevice_rca rcabin; + struct tasdevice_fw *fmw; + struct gpio_desc *reset; + struct mutex codec_lock; + struct regmap *regmap; + struct device *dev; + struct tm tm; + + unsigned char crc8_lkp_tbl[CRC8_TABLE_SIZE]; + unsigned char coef_binaryname[64]; + unsigned char rca_binaryname[64]; + unsigned char dev_name[32]; + + bool force_fwload_status; + bool playback_started; + bool is_loading; + bool is_loaderr; + unsigned int cali_reg_array[CALIB_MAX]; + unsigned int cali_data[CALIB_MAX]; + unsigned int err_code; + void *codec; + int cur_book; + int cur_prog; + int cur_conf; + int fw_state; + int index; + int irq; + + int (*fw_parse_variable_header)(struct tasdevice_priv *tas_priv, + const struct firmware *fmw, + int offset); + int (*fw_parse_program_data)(struct tasdevice_priv *tas_priv, + struct tasdevice_fw *tas_fmw, + const struct firmware *fmw, int offset); + int (*fw_parse_configuration_data)(struct tasdevice_priv *tas_priv, + struct tasdevice_fw *tas_fmw, + const struct firmware *fmw, + int offset); + int (*tasdevice_load_block)(struct tasdevice_priv *tas_priv, + struct tasdev_blk *block); + + int (*save_calibration)(struct tasdevice_priv *tas_priv); + void (*apply_calibration)(struct tasdevice_priv *tas_priv); +}; + +int tasdevice_spi_dev_read(struct tasdevice_priv *tas_priv, + unsigned int reg, unsigned int *value); +int tasdevice_spi_dev_write(struct tasdevice_priv *tas_priv, + unsigned int reg, unsigned int value); +int tasdevice_spi_dev_bulk_write(struct tasdevice_priv *tas_priv, + unsigned int reg, unsigned char *p_data, + unsigned int n_length); +int tasdevice_spi_dev_bulk_read(struct tasdevice_priv *tas_priv, + unsigned int reg, unsigned char *p_data, + unsigned int n_length); +int tasdevice_spi_dev_update_bits(struct tasdevice_priv *tasdevice, + unsigned int reg, unsigned int mask, + unsigned int value); + +void tasdevice_spi_select_cfg_blk(void *context, int conf_no, + unsigned char block_type); +void tasdevice_spi_config_info_remove(void *context); +int tasdevice_spi_dsp_parser(void *context); +int tasdevice_spi_rca_parser(void *context, const struct firmware *fmw); +void tasdevice_spi_dsp_remove(void *context); +void tasdevice_spi_calbin_remove(void *context); +int tasdevice_spi_select_tuningprm_cfg(void *context, int prm, int cfg_no, + int rca_conf_no); +int tasdevice_spi_prmg_load(void *context, int prm_no); +int tasdevice_spi_prmg_calibdata_load(void *context, int prm_no); +void tasdevice_spi_tuning_switch(void *context, int state); +int tas2781_spi_load_calibration(void *context, char *file_name, + unsigned short i); +#endif /* __TAS2781_SPI_H__ */ diff --git a/sound/pci/hda/tas2781_hda_spi.c b/sound/pci/hda/tas2781_hda_spi.c new file mode 100644 index 000000000000..a426b5bee451 --- /dev/null +++ b/sound/pci/hda/tas2781_hda_spi.c @@ -0,0 +1,1272 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// TAS2781 HDA SPI driver +// +// Copyright 2024 Texas Instruments, Inc. +// +// Author: Baojun Xu <baojun.xu(a)ti.com> + +#include <linux/acpi.h> +#include <linux/array_size.h> +#include <linux/bits.h> +#include <linux/cleanup.h> +#include <linux/crc8.h> +#include <linux/crc32.h> +#include <linux/efi.h> +#include <linux/firmware.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/pm_runtime.h> +#include <linux/property.h> +#include <linux/regmap.h> +#include <linux/spi/spi.h> +#include <linux/time.h> +#include <linux/types.h> +#include <linux/units.h> + +#include <sound/hda_codec.h> +#include <sound/soc.h> +#include <sound/tas2781-dsp.h> +#include <sound/tlv.h> +#include <sound/tas2781-tlv.h> + +#include "tas2781-spi.h" + +#include "hda_local.h" +#include "hda_auto_parser.h" +#include "hda_component.h" +#include "hda_jack.h" +#include "hda_generic.h" + +/* + * No standard control callbacks for SNDRV_CTL_ELEM_IFACE_CARD + * Define two controls, one is Volume control callbacks, the other is + * flag setting control callbacks. + */ + +/* Volume control callbacks for tas2781 */ +#define ACARD_SINGLE_RANGE_EXT_TLV(xname, xreg, xshift, xmin, xmax, xinvert, \ + xhandler_get, xhandler_put, tlv_array) { \ + .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = (xname), \ + .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \ + SNDRV_CTL_ELEM_ACCESS_READWRITE, \ + .tlv.p = (tlv_array), \ + .info = snd_soc_info_volsw_range, \ + .get = xhandler_get, .put = xhandler_put, \ + .private_value = (unsigned long)&(struct soc_mixer_control) { \ + .reg = xreg, .rreg = xreg, \ + .shift = xshift, .rshift = xshift,\ + .min = xmin, .max = xmax, .invert = xinvert, \ + } \ +} + +/* Flag control callbacks for tas2781 */ +#define ACARD_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) { \ + .iface = SNDRV_CTL_ELEM_IFACE_CARD, \ + .name = xname, \ + .info = snd_ctl_boolean_mono_info, \ + .get = xhandler_get, \ + .put = xhandler_put, \ + .private_value = xdata, \ +} + +struct tas2781_hda { + struct tasdevice_priv *priv; + struct acpi_device *dacpi; + struct snd_kcontrol *dsp_prog_ctl; + struct snd_kcontrol *dsp_conf_ctl; + struct snd_kcontrol *snd_ctls[3]; + struct snd_kcontrol *prof_ctl; +}; + +static const struct regmap_range_cfg tasdevice_ranges[] = { + { + .range_min = 0, + .range_max = TASDEVICE_MAX_SIZE, + .selector_reg = TASDEVICE_PAGE_SELECT, + .selector_mask = GENMASK(7, 0), + .selector_shift = 0, + .window_start = 0, + .window_len = TASDEVICE_MAX_PAGE, + }, +}; + +static const struct regmap_config tasdevice_regmap = { + .reg_bits = 8, + .val_bits = 8, + .zero_flag_mask = true, + .cache_type = REGCACHE_NONE, + .ranges = tasdevice_ranges, + .num_ranges = ARRAY_SIZE(tasdevice_ranges), + .max_register = TASDEVICE_MAX_SIZE, +}; + +static int tasdevice_spi_switch_book(struct tasdevice_priv *tas_priv, int reg) +{ + struct regmap *map = tas_priv->regmap; + int ret; + + if (tas_priv->cur_book != TASDEVICE_BOOK_ID(reg)) { + ret = regmap_write(map, TASDEVICE_BOOKCTL_REG, + TASDEVICE_BOOK_ID(reg)); + if (ret < 0) { + dev_err(tas_priv->dev, "Switch Book E=%d\n", ret); + return ret; + } + tas_priv->cur_book = TASDEVICE_BOOK_ID(reg); + } + return ret; +} + +int tasdevice_spi_dev_read(struct tasdevice_priv *tas_priv, + unsigned int reg, + unsigned int *val) +{ + struct regmap *map = tas_priv->regmap; + int ret; + + ret = tasdevice_spi_switch_book(tas_priv, reg); + if (ret < 0) + return ret; + + /* + * In our TAS2781 SPI mode, if read from other book (not book 0), + * or read from page number larger than 1 in book 0, one more byte + * read is needed, and first byte is a dummy byte, need to be ignored. + */ + if ((TASDEVICE_BOOK_ID(reg) > 0) || (TASDEVICE_PAGE_ID(reg) > 1)) { + unsigned char data[2]; + + ret = regmap_bulk_read(map, TASDEVICE_PAGE_REG(reg) | 1, + data, sizeof(data)); + *val = data[1]; + } else { + ret = regmap_read(map, TASDEVICE_PAGE_REG(reg) | 1, val); + } + if (ret < 0) + dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret); + + return ret; +} + +int tasdevice_spi_dev_write(struct tasdevice_priv *tas_priv, + unsigned int reg, + unsigned int value) +{ + struct regmap *map = tas_priv->regmap; + int ret; + + ret = tasdevice_spi_switch_book(tas_priv, reg); + if (ret < 0) + return ret; + + ret = regmap_write(map, TASDEVICE_PAGE_REG(reg), value); + if (ret < 0) + dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret); + + return ret; +} + +int tasdevice_spi_dev_bulk_write(struct tasdevice_priv *tas_priv, + unsigned int reg, + unsigned char *data, + unsigned int len) +{ + struct regmap *map = tas_priv->regmap; + int ret; + + ret = tasdevice_spi_switch_book(tas_priv, reg); + if (ret < 0) + return ret; + + ret = regmap_bulk_write(map, TASDEVICE_PAGE_REG(reg), data, len); + if (ret < 0) + dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret); + + return ret; +} + +int tasdevice_spi_dev_bulk_read(struct tasdevice_priv *tas_priv, + unsigned int reg, + unsigned char *data, + unsigned int len) +{ + struct regmap *map = tas_priv->regmap; + int ret; + + ret = tasdevice_spi_switch_book(tas_priv, reg); + if (ret < 0) + return ret; + + if (len > TASDEVICE_MAX_PAGE) + len = TASDEVICE_MAX_PAGE; + /* + * In our TAS2781 SPI mode, if read from other book (not book 0), + * or read from page number larger than 1 in book 0, one more byte + * read is needed, and first byte is a dummy byte, need to be ignored. + */ + if ((TASDEVICE_BOOK_ID(reg) > 0) || (TASDEVICE_PAGE_ID(reg) > 1)) { + unsigned char buf[TASDEVICE_MAX_PAGE+1]; + + ret = regmap_bulk_read(map, TASDEVICE_PAGE_REG(reg) | 1, buf, + len + 1); + memcpy(data, buf + 1, len); + } else { + ret = regmap_bulk_read(map, TASDEVICE_PAGE_REG(reg) | 1, data, + len); + } + if (ret < 0) + dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret); + + return ret; +} + +int tasdevice_spi_dev_update_bits(struct tasdevice_priv *tas_priv, + unsigned int reg, + unsigned int mask, + unsigned int value) +{ + struct regmap *map = tas_priv->regmap; + int ret, val; + + /* + * In our TAS2781 SPI mode, read/write was masked in last bit of + * address, it cause regmap_update_bits() not work as expected. + */ + ret = tasdevice_spi_dev_read(tas_priv, reg, &val); + if (ret < 0) { + dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret); + return ret; + } + ret = regmap_write(map, TASDEVICE_PAGE_REG(reg), + (val & ~mask) | (mask & value)); + if (ret < 0) + dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret); + + return ret; +} + +static void tas2781_spi_reset(struct tasdevice_priv *tas_dev) +{ + int ret; + + if (tas_dev->reset) { + gpiod_set_value_cansleep(tas_dev->reset, 0); + fsleep(800); + gpiod_set_value_cansleep(tas_dev->reset, 1); + } + ret = tasdevice_spi_dev_write(tas_dev, TAS2781_REG_SWRESET, + TAS2781_REG_SWRESET_RESET); + if (ret < 0) + dev_err(tas_dev->dev, "dev sw-reset fail, %d\n", ret); + fsleep(1000); +} + +static int tascodec_spi_init(struct tasdevice_priv *tas_priv, + void *codec, struct module *module, + void (*cont)(const struct firmware *fw, void *context)) +{ + int ret; + + /* + * Codec Lock Hold to ensure that codec_probe and firmware parsing and + * loading do not simultaneously execute. + */ + guard(mutex)(&tas_priv->codec_lock); + + ret = scnprintf(tas_priv->rca_binaryname, + sizeof(tas_priv->rca_binaryname), "%sRCA%d.bin", + tas_priv->dev_name, tas_priv->index); + if (ret <= 0) { + dev_err(tas_priv->dev, "rca name err:0x%08x\n", ret); + return ret; + } + crc8_populate_msb(tas_priv->crc8_lkp_tbl, TASDEVICE_CRC8_POLYNOMIAL); + tas_priv->codec = codec; + ret = request_firmware_nowait(module, FW_ACTION_UEVENT, + tas_priv->rca_binaryname, tas_priv->dev, GFP_KERNEL, tas_priv, + cont); + if (ret) + dev_err(tas_priv->dev, "request_firmware_nowait err:0x%08x\n", + ret); + + return ret; +} + +static void tasdevice_spi_init(struct tasdevice_priv *tas_priv) +{ + tas_priv->cur_prog = -1; + tas_priv->cur_conf = -1; + + tas_priv->cur_book = -1; + tas_priv->cur_prog = -1; + tas_priv->cur_conf = -1; + + /* Store default registers address for calibration data. */ + tas_priv->cali_reg_array[0] = TASDEVICE_REG(0, 0x17, 0x74); + tas_priv->cali_reg_array[1] = TASDEVICE_REG(0, 0x18, 0x0c); + tas_priv->cali_reg_array[2] = TASDEVICE_REG(0, 0x18, 0x14); + tas_priv->cali_reg_array[3] = TASDEVICE_REG(0, 0x13, 0x70); + tas_priv->cali_reg_array[4] = TASDEVICE_REG(0, 0x18, 0x7c); + + mutex_init(&tas_priv->codec_lock); +} + +static int tasdevice_spi_amp_putvol(struct tasdevice_priv *tas_priv, + struct snd_ctl_elem_value *ucontrol, + struct soc_mixer_control *mc) +{ + unsigned int invert = mc->invert; + unsigned char mask; + int max = mc->max; + int val, ret; + + mask = rounddown_pow_of_two(max); + mask <<= mc->shift; + val = clamp(invert ? max - ucontrol->value.integer.value[0] : + ucontrol->value.integer.value[0], 0, max); + ret = tasdevice_spi_dev_update_bits(tas_priv, + mc->reg, mask, (unsigned int)(val << mc->shift)); + if (ret) + dev_err(tas_priv->dev, "set AMP vol error in dev %d\n", + tas_priv->index); + + return ret; +} + +static int tasdevice_spi_amp_getvol(struct tasdevice_priv *tas_priv, + struct snd_ctl_elem_value *ucontrol, + struct soc_mixer_control *mc) +{ + unsigned int invert = mc->invert; + unsigned char mask = 0; + int max = mc->max; + int ret, val; + + /* Read the primary device */ + ret = tasdevice_spi_dev_read(tas_priv, mc->reg, &val); + if (ret) { + dev_err(tas_priv->dev, "%s, get AMP vol error\n", __func__); + return ret; + } + + mask = rounddown_pow_of_two(max); + mask <<= mc->shift; + val = (val & mask) >> mc->shift; + val = clamp(invert ? max - val : val, 0, max); + ucontrol->value.integer.value[0] = val; + + return ret; +} + +static int tasdevice_spi_digital_putvol(struct tasdevice_priv *tas_priv, + struct snd_ctl_elem_value *ucontrol, + struct soc_mixer_control *mc) +{ + unsigned int invert = mc->invert; + int max = mc->max; + int val, ret; + + val = clamp(invert ? max - ucontrol->value.integer.value[0] : + ucontrol->value.integer.value[0], 0, max); + ret = tasdevice_spi_dev_write(tas_priv, mc->reg, (unsigned int)val); + if (ret) + dev_err(tas_priv->dev, "set digital vol err in dev %d\n", + tas_priv->index); + + return ret; +} + +static int tasdevice_spi_digital_getvol(struct tasdevice_priv *tas_priv, + struct snd_ctl_elem_value *ucontrol, + struct soc_mixer_control *mc) +{ + unsigned int invert = mc->invert; + int max = mc->max; + int ret, val; + + /* Read the primary device as the whole */ + ret = tasdevice_spi_dev_read(tas_priv, mc->reg, &val); + if (ret) { + dev_err(tas_priv->dev, "%s, get digital vol err\n", __func__); + return ret; + } + + val = clamp(invert ? max - val : val, 0, max); + ucontrol->value.integer.value[0] = val; + + return ret; +} + +static int tas2781_read_acpi(struct tas2781_hda *tas_hda, + const char *hid, + int id) +{ + struct tasdevice_priv *p = tas_hda->priv; + struct acpi_device *adev; + struct device *physdev; + u32 values[HDA_MAX_COMPONENTS]; + const char *property; + size_t nval; + int ret, i; + + adev = acpi_dev_get_first_match_dev(hid, NULL, -1); + if (!adev) { + dev_err(p->dev, "Failed to find ACPI device: %s\n", hid); + return -ENODEV; + } + + strscpy(p->dev_name, hid, sizeof(p->dev_name)); + tas_hda->dacpi = adev; + physdev = get_device(acpi_get_first_physical_node(adev)); + acpi_dev_put(adev); + + property = "ti,dev-index"; + ret = device_property_count_u32(physdev, property); + if (ret <= 0 || ret > ARRAY_SIZE(values)) { + ret = -EINVAL; + goto err; + } + nval = ret; + + ret = device_property_read_u32_array(physdev, property, values, nval); + if (ret) + goto err; + + p->index = U8_MAX; + for (i = 0; i < nval; i++) { + if (values[i] == id) { + p->index = i; + break; + } + } + if (p->index == U8_MAX) { + dev_dbg(p->dev, "No index found in %s\n", property); + ret = -ENODEV; + goto err; + } + + if (p->index == 0) { + /* All of amps share same RESET pin. */ + p->reset = devm_gpiod_get_index_optional(physdev, "reset", + p->index, GPIOD_OUT_LOW); + if (IS_ERR(p->reset)) { + dev_err_probe(p->dev, ret, "Failed on reset GPIO\n"); + goto err; + } + } + put_device(physdev); + + return 0; +err: + dev_err(p->dev, "read acpi error, ret: %d\n", ret); + put_device(physdev); + acpi_dev_put(adev); + + return ret; +} + +static void tas2781_hda_playback_hook(struct device *dev, int action) +{ + struct tas2781_hda *tas_hda = dev_get_drvdata(dev); + + if (action == HDA_GEN_PCM_ACT_OPEN) { + pm_runtime_get_sync(dev); + guard(mutex)(&tas_hda->priv->codec_lock); + tasdevice_spi_tuning_switch(tas_hda->priv, 0); + } else if (action == HDA_GEN_PCM_ACT_CLOSE) { + guard(mutex)(&tas_hda->priv->codec_lock); + tasdevice_spi_tuning_switch(tas_hda->priv, 1); + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + } +} + +static int tasdevice_info_profile(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = tas_priv->rcabin.ncfgs - 1; + + return 0; +} + +static int tasdevice_get_profile_id(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + + ucontrol->value.integer.value[0] = tas_priv->rcabin.profile_cfg_id; + + return 0; +} + +static int tasdevice_set_profile_id(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + int max = tas_priv->rcabin.ncfgs - 1; + int val; + + val = clamp(ucontrol->value.integer.value[0], 0, max); + if (tas_priv->rcabin.profile_cfg_id != val) { + tas_priv->rcabin.profile_cfg_id = val; + return 1; + } + + return 0; +} + +static int tasdevice_info_programs(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = tas_priv->fmw->nr_programs - 1; + + return 0; +} + +static int tasdevice_info_config(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = tas_priv->fmw->nr_configurations - 1; + + return 0; +} + +static int tasdevice_program_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + + ucontrol->value.integer.value[0] = tas_priv->cur_prog; + + return 0; +} + +static int tasdevice_program_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + int nr_program = ucontrol->value.integer.value[0]; + int max = tas_priv->fmw->nr_programs - 1; + int val; + + val = clamp(nr_program, 0, max); + + if (tas_priv->cur_prog != val) { + tas_priv->cur_prog = val; + return 1; + } + + return 0; +} + +static int tasdevice_config_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + + ucontrol->value.integer.value[0] = tas_priv->cur_conf; + + return 0; +} + +static int tasdevice_config_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + int max = tas_priv->fmw->nr_configurations - 1; + int val; + + val = clamp(ucontrol->value.integer.value[0], 0, max); + + if (tas_priv->cur_conf != val) { + tas_priv->cur_conf = val; + return 1; + } + + return 0; +} + +/* + * tas2781_digital_getvol - get the volum control + * @kcontrol: control pointer + * @ucontrol: User data + * + * Customer Kcontrol for tas2781 is primarily for regmap booking, paging + * depends on internal regmap mechanism. + * tas2781 contains book and page two-level register map, especially + * book switching will set the register BXXP00R7F, after switching to the + * correct book, then leverage the mechanism for paging to access the + * register. + * + * Return 0 if succeeded. + */ +static int tas2781_digital_getvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + + return tasdevice_spi_digital_getvol(tas_priv, ucontrol, mc); +} + +static int tas2781_amp_getvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + + return tasdevice_spi_amp_getvol(tas_priv, ucontrol, mc); +} + +static int tas2781_digital_putvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + + /* The check of the given value is in tasdevice_digital_putvol. */ + return tasdevice_spi_digital_putvol(tas_priv, ucontrol, mc); +} + +static int tas2781_amp_putvol(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + + /* The check of the given value is in tasdevice_amp_putvol. */ + return tasdevice_spi_amp_putvol(tas_priv, ucontrol, mc); +} + +static int tas2781_force_fwload_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + + ucontrol->value.integer.value[0] = (int)tas_priv->force_fwload_status; + dev_dbg(tas_priv->dev, "%s : Force FWload %s\n", __func__, + str_on_off(tas_priv->force_fwload_status)); + + return 0; +} + +static int tas2781_force_fwload_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol); + bool change, val = (bool)ucontrol->value.integer.value[0]; + + if (tas_priv->force_fwload_status == val) { + change = false; + } else { + change = true; + tas_priv->force_fwload_status = val; + } + dev_dbg(tas_priv->dev, "%s : Force FWload %s\n", __func__, + str_on_off(tas_priv->force_fwload_status)); + + return change; +} + +static const struct snd_kcontrol_new tas2781_snd_controls[] = { + ACARD_SINGLE_RANGE_EXT_TLV("Speaker Analog Gain 0", TAS2781_AMP_LEVEL, + 1, 0, 20, 0, tas2781_amp_getvol, + tas2781_amp_putvol, amp_vol_tlv), + ACARD_SINGLE_RANGE_EXT_TLV("Speaker Digital Gain 0", TAS2781_DVC_LVL, + 0, 0, 200, 1, tas2781_digital_getvol, + tas2781_digital_putvol, dvc_tlv), + ACARD_SINGLE_BOOL_EXT("Speaker Force Firmware Load 0", 0, + tas2781_force_fwload_get, tas2781_force_fwload_put), + ACARD_SINGLE_RANGE_EXT_TLV("Speaker Analog Gain 1", TAS2781_AMP_LEVEL, + 1, 0, 20, 0, tas2781_amp_getvol, + tas2781_amp_putvol, amp_vol_tlv), + ACARD_SINGLE_RANGE_EXT_TLV("Speaker Digital Gain 1", TAS2781_DVC_LVL, + 0, 0, 200, 1, tas2781_digital_getvol, + tas2781_digital_putvol, dvc_tlv), + ACARD_SINGLE_BOOL_EXT("Speaker Force Firmware Load 1", 0, + tas2781_force_fwload_get, tas2781_force_fwload_put), +}; + +static const struct snd_kcontrol_new tas2781_prof_ctrl[] = { +{ + .name = "Speaker Profile Id - 0", + .iface = SNDRV_CTL_ELEM_IFACE_CARD, + .info = tasdevice_info_profile, + .get = tasdevice_get_profile_id, + .put = tasdevice_set_profile_id, +}, +{ + .name = "Speaker Profile Id - 1", + .iface = SNDRV_CTL_ELEM_IFACE_CARD, + .info = tasdevice_info_profile, + .get = tasdevice_get_profile_id, + .put = tasdevice_set_profile_id, +}, +}; +static const struct snd_kcontrol_new tas2781_dsp_prog_ctrl[] = { +{ + .name = "Speaker Program Id 0", + .iface = SNDRV_CTL_ELEM_IFACE_CARD, + .info = tasdevice_info_programs, + .get = tasdevice_program_get, + .put = tasdevice_program_put, +}, +{ + .name = "Speaker Program Id 1", + .iface = SNDRV_CTL_ELEM_IFACE_CARD, + .info = tasdevice_info_programs, + .get = tasdevice_program_get, + .put = tasdevice_program_put, +}, +}; + +static const struct snd_kcontrol_new tas2781_dsp_conf_ctrl[] = { +{ + .name = "Speaker Config Id 0", + .iface = SNDRV_CTL_ELEM_IFACE_CARD, + .info = tasdevice_info_config, + .get = tasdevice_config_get, + .put = tasdevice_config_put, +}, +{ + .name = "Speaker Config Id 1", + .iface = SNDRV_CTL_ELEM_IFACE_CARD, + .info = tasdevice_info_config, + .get = tasdevice_config_get, + .put = tasdevice_config_put, +}, +}; + +static void tas2781_apply_calib(struct tasdevice_priv *tas_priv) +{ + int i, rc; + + /* + * If no calibration data exist in tasdevice_priv *tas_priv, + * calibration apply will be ignored, and use default values + * in firmware binary, which was loaded during firmware download. + */ + if (tas_priv->cali_data[0] == 0) + return; + /* + * Calibration data was saved in tasdevice_priv *tas_priv as: + * unsigned int cali_data[CALIB_MAX]; + * and every data (in 4 bytes) will be saved in register which in + * book 0, and page number in page_array[], offset was saved in + * rgno_array[]. + */ + for (i = 0; i < CALIB_MAX; i++) { + rc = tasdevice_spi_dev_bulk_write(tas_priv, + tas_priv->cali_reg_array[i], + (unsigned char *)&tas_priv->cali_data[i], 4); + if (rc < 0) + dev_err(tas_priv->dev, + "chn %d calib %d bulk_wr err = %d\n", + tas_priv->index, i, rc); + } +} + +/* + * Update the calibration data, including speaker impedance, f0, etc, + * into algo. Calibrate data is done by manufacturer in the factory. + * These data are used by Algo for calculating the speaker temperature, + * speaker membrane excursion and f0 in real time during playback. + * Calibration data format in EFI is V2, since 2024. + */ +static int tas2781_save_calibration(struct tasdevice_priv *tas_priv) +{ + /* + * GUID was used for data access in BIOS, it was provided by board + * manufactory, like HP: "{02f9af02-7734-4233-b43d-93fe5aa35db3}" + */ + efi_guid_t efi_guid = + EFI_GUID(0x02f9af02, 0x7734, 0x4233, + 0xb4, 0x3d, 0x93, 0xfe, 0x5a, 0xa3, 0x5d, 0xb3); + static efi_char16_t efi_name[] = TASDEVICE_CALIBRATION_DATA_NAME; + unsigned char data[TASDEVICE_CALIBRATION_DATA_SIZE], *buf; + unsigned int attr, crc, offset, *tmp_val; + struct tm *tm = &tas_priv->tm; + unsigned long total_sz = 0; + efi_status_t status; + + tas_priv->cali_data[0] = 0; + status = efi.get_variable(efi_name, &efi_guid, &attr, &total_sz, data); + if (status == EFI_BUFFER_TOO_SMALL) { + if (total_sz > TASDEVICE_CALIBRATION_DATA_SIZE) + return -ENOMEM; + /* Get variable contents into buffer */ + status = efi.get_variable(efi_name, &efi_guid, &attr, + &total_sz, data); + } + if (status != EFI_SUCCESS) + return -EINVAL; + + tmp_val = (unsigned int *)data; + if (tmp_val[0] == 2781) { + /* + * New features were added in calibrated Data V3: + * 1. Added calibration registers address define in + * a node, marked as Device id == 0x80. + * New features were added in calibrated Data V2: + * 1. Added some the fields to store the link_id and + * uniqie_id for multi-link solutions + * 2. Support flexible number of devices instead of + * fixed one in V1. + * Layout of calibrated data V2 in UEFI(total 256 bytes): + * ChipID (2781, 4 bytes) + * Device-Sum (4 bytes) + * TimeStamp of Calibration (4 bytes) + * for (i = 0; i < Device-Sum; i++) { + * Device #i index_info () { + * SDW link id (2bytes) + * SDW unique_id (2bytes) + * } // if Device number is 0x80, mean it's + * calibration registers address. + * Calibrated Data of Device #i (20 bytes) + * } + * CRC (4 bytes) + * Reserved (the rest) + */ + crc = crc32(~0, data, (3 + tmp_val[1] * 6) * 4) ^ ~0; + + if (crc != tmp_val[3 + tmp_val[1] * 6]) + return 0; + + time64_to_tm(tmp_val[2], 0, tm); + for (int j = 0; j < tmp_val[1]; j++) { + offset = j * 6 + 3; + if (tmp_val[offset] == tas_priv->index) { + for (int i = 0; i < CALIB_MAX; i++) + tas_priv->cali_data[i] = + tmp_val[offset + i + 1]; + } else if (tmp_val[offset] == + TASDEVICE_CALIBRATION_REG_ADDRESS) { + for (int i = 0; i < CALIB_MAX; i++) { + buf = &data[(offset + i + 1) * 4]; + tas_priv->cali_reg_array[i] = + TASDEVICE_REG(buf[1], buf[2], + buf[3]); + } + } + tas_priv->apply_calibration(tas_priv); + } + } else { + /* + * Calibration data is in V1 format. + * struct cali_data { + * char cali_data[20]; + * } + * + * struct { + * struct cali_data cali_data[4]; + * int TimeStamp of Calibration (4 bytes) + * int CRC (4 bytes) + * } ueft; + */ + crc = crc32(~0, data, 84) ^ ~0; + if (crc == tmp_val[21]) { + time64_to_tm(tmp_val[20], 0, tm); + for (int i = 0; i < CALIB_MAX; i++) + tas_priv->cali_data[i] = + tmp_val[tas_priv->index * 5 + i]; + tas_priv->apply_calibration(tas_priv); + } + } + + return 0; +} + +static void tas2781_hda_remove_controls(struct tas2781_hda *tas_hda) +{ + struct hda_codec *codec = tas_hda->priv->codec; + + snd_ctl_remove(codec->card, tas_hda->dsp_prog_ctl); + + snd_ctl_remove(codec->card, tas_hda->dsp_conf_ctl); + + for (int i = ARRAY_SIZE(tas_hda->snd_ctls) - 1; i >= 0; i--) + snd_ctl_remove(codec->card, tas_hda->snd_ctls[i]); + + snd_ctl_remove(codec->card, tas_hda->prof_ctl); +} + +static void tasdev_fw_ready(const struct firmware *fmw, void *context) +{ + struct tasdevice_priv *tas_priv = context; + struct tas2781_hda *tas_hda = dev_get_drvdata(tas_priv->dev); + struct hda_codec *codec = tas_priv->codec; + int i, j, ret; + + pm_runtime_get_sync(tas_priv->dev); + guard(mutex)(&tas_priv->codec_lock); + + ret = tasdevice_spi_rca_parser(tas_priv, fmw); + if (ret) + goto out; + + /* Add control one time only. */ + tas_hda->prof_ctl = snd_ctl_new1(&tas2781_prof_ctrl[tas_priv->index], + tas_priv); + ret = snd_ctl_add(codec->card, tas_hda->prof_ctl); + if (ret) { + dev_err(tas_priv->dev, "Failed to add KControl %s = %d\n", + tas2781_prof_ctrl[tas_priv->index].name, ret); + goto out; + } + j = tas_priv->index * ARRAY_SIZE(tas2781_snd_controls) / 2; + for (i = 0; i < 3; i++) { + tas_hda->snd_ctls[i] = snd_ctl_new1(&tas2781_snd_controls[i+j], + tas_priv); + ret = snd_ctl_add(codec->card, tas_hda->snd_ctls[i]); + if (ret) { + dev_err(tas_priv->dev, + "Failed to add KControl %s = %d\n", + tas2781_snd_controls[i+tas_priv->index*3].name, + ret); + goto out; + } + } + + tasdevice_spi_dsp_remove(tas_priv); + + tas_priv->fw_state = TASDEVICE_DSP_FW_PENDING; + scnprintf(tas_priv->coef_binaryname, 64, "TAS2XXX%08X-%01d.bin", + codec->core.subsystem_id, tas_priv->index); + ret = tasdevice_spi_dsp_parser(tas_priv); + if (ret) { + dev_err(tas_priv->dev, "dspfw load %s error\n", + tas_priv->coef_binaryname); + tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; + goto out; + } + + /* Add control one time only. */ + tas_hda->dsp_prog_ctl = + snd_ctl_new1(&tas2781_dsp_prog_ctrl[tas_priv->index], + tas_priv); + ret = snd_ctl_add(codec->card, tas_hda->dsp_prog_ctl); + if (ret) { + dev_err(tas_priv->dev, + "Failed to add KControl %s = %d\n", + tas2781_dsp_prog_ctrl[tas_priv->index].name, ret); + goto out; + } + + tas_hda->dsp_conf_ctl = + snd_ctl_new1(&tas2781_dsp_conf_ctrl[tas_priv->index], + tas_priv); + ret = snd_ctl_add(codec->card, tas_hda->dsp_conf_ctl); + if (ret) { + dev_err(tas_priv->dev, "Failed to add KControl %s = %d\n", + tas2781_dsp_conf_ctrl[tas_priv->index].name, ret); + goto out; + } + + /* Perform AMP reset before firmware download. */ + tas_priv->rcabin.profile_cfg_id = TAS2781_PRE_POST_RESET_CFG; + tasdevice_spi_tuning_switch(tas_priv, 0); + tas2781_spi_reset(tas_priv); + tasdevice_spi_tuning_switch(tas_priv, 1); + + tas_priv->fw_state = TASDEVICE_DSP_FW_ALL_OK; + ret = tasdevice_spi_prmg_load(tas_priv, 0); + if (ret < 0) { + dev_err(tas_priv->dev, "FW download failed = %d\n", ret); + goto out; + } + if (tas_priv->fmw->nr_programs > 0) + tas_priv->cur_prog = 0; + if (tas_priv->fmw->nr_configurations > 0) + tas_priv->cur_conf = 0; + + /* + * If calibrated data occurs error, dsp will still works with default + * calibrated data inside algo. + */ + tas_priv->save_calibration(tas_priv); + +out: + if (fmw) + release_firmware(fmw); + pm_runtime_mark_last_busy(tas_hda->priv->dev); + pm_runtime_put_autosuspend(tas_hda->priv->dev); +} + +static int tas2781_hda_bind(struct device *dev, struct device *master, + void *master_data) +{ + struct tas2781_hda *tas_hda = dev_get_drvdata(dev); + struct hda_component_parent *parent = master_data; + struct hda_component *comp; + struct hda_codec *codec; + int ret; + + comp = hda_component_from_index(parent, tas_hda->priv->index); + if (!comp) + return -EINVAL; + + if (comp->dev) + return -EBUSY; + + codec = parent->codec; + + pm_runtime_get_sync(dev); + + comp->dev = dev; + + strscpy(comp->name, dev_name(dev), sizeof(comp->name)); + + ret = tascodec_spi_init(tas_hda->priv, codec, THIS_MODULE, + tasdev_fw_ready); + if (!ret) + comp->playback_hook = tas2781_hda_playback_hook; + + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + + return ret; +} + +static void tas2781_hda_unbind(struct device *dev, struct device *master, + void *master_data) +{ + struct tas2781_hda *tas_hda = dev_get_drvdata(dev); + struct hda_component_parent *parent = master_data; + struct hda_component *comp; + + comp = hda_component_from_index(parent, tas_hda->priv->index); + if (comp && (comp->dev == dev)) { + comp->dev = NULL; + memset(comp->name, 0, sizeof(comp->name)); + comp->playback_hook = NULL; + } + + tas2781_hda_remove_controls(tas_hda); + + tasdevice_spi_config_info_remove(tas_hda->priv); + tasdevice_spi_dsp_remove(tas_hda->priv); + + tas_hda->priv->fw_state = TASDEVICE_DSP_FW_PENDING; +} + +static const struct component_ops tas2781_hda_comp_ops = { + .bind = tas2781_hda_bind, + .unbind = tas2781_hda_unbind, +}; + +static void tas2781_hda_remove(struct device *dev) +{ + struct tas2781_hda *tas_hda = dev_get_drvdata(dev); + + component_del(tas_hda->priv->dev, &tas2781_hda_comp_ops); + + pm_runtime_get_sync(tas_hda->priv->dev); + pm_runtime_disable(tas_hda->priv->dev); + + pm_runtime_put_noidle(tas_hda->priv->dev); + + mutex_destroy(&tas_hda->priv->codec_lock); +} + +static int tas2781_hda_spi_probe(struct spi_device *spi) +{ + struct tasdevice_priv *tas_priv; + struct tas2781_hda *tas_hda; + const char *device_name; + int ret = 0; + + tas_hda = devm_kzalloc(&spi->dev, sizeof(*tas_hda), GFP_KERNEL); + if (!tas_hda) + return -ENOMEM; + + spi->max_speed_hz = TAS2781_SPI_MAX_FREQ; + + tas_priv = devm_kzalloc(&spi->dev, sizeof(*tas_priv), GFP_KERNEL); + if (!tas_priv) + goto err; + tas_priv->dev = &spi->dev; + tas_hda->priv = tas_priv; + tas_priv->regmap = devm_regmap_init_spi(spi, &tasdevice_regmap); + if (IS_ERR(tas_priv->regmap)) { + ret = PTR_ERR(tas_priv->regmap); + dev_err(tas_priv->dev, "Failed to allocate regmap: %d\n", + ret); + goto err; + } + if (strstr(dev_name(&spi->dev), "TXNW2781")) { + device_name = "TXNW2781"; + tas_priv->save_calibration = tas2781_save_calibration; + tas_priv->apply_calibration = tas2781_apply_calib; + } else { + goto err; + } + + tas_priv->irq = spi->irq; + dev_set_drvdata(&spi->dev, tas_hda); + ret = tas2781_read_acpi(tas_hda, device_name, + spi_get_chipselect(spi, 0)); + if (ret) + return dev_err_probe(tas_priv->dev, ret, + "Platform not supported\n"); + + tasdevice_spi_init(tas_priv); + + pm_runtime_set_autosuspend_delay(tas_priv->dev, 3000); + pm_runtime_use_autosuspend(tas_priv->dev); + pm_runtime_mark_last_busy(tas_priv->dev); + pm_runtime_set_active(tas_priv->dev); + pm_runtime_get_noresume(tas_priv->dev); + pm_runtime_enable(tas_priv->dev); + + pm_runtime_put_autosuspend(tas_priv->dev); + + ret = component_add(tas_priv->dev, &tas2781_hda_comp_ops); + if (ret) { + dev_err(tas_priv->dev, "Register component fail: %d\n", ret); + pm_runtime_disable(tas_priv->dev); + } + +err: + if (ret) + tas2781_hda_remove(&spi->dev); + + return ret; +} + +static void tas2781_hda_spi_remove(struct spi_device *spi) +{ + tas2781_hda_remove(&spi->dev); +} + +static int tas2781_runtime_suspend(struct device *dev) +{ + struct tas2781_hda *tas_hda = dev_get_drvdata(dev); + + guard(mutex)(&tas_hda->priv->codec_lock); + + tasdevice_spi_tuning_switch(tas_hda->priv, 1); + + tas_hda->priv->cur_book = -1; + tas_hda->priv->cur_conf = -1; + + return 0; +} + +static int tas2781_runtime_resume(struct device *dev) +{ + struct tas2781_hda *tas_hda = dev_get_drvdata(dev); + + guard(mutex)(&tas_hda->priv->codec_lock); + + tasdevice_spi_tuning_switch(tas_hda->priv, 0); + + return 0; +} + +static int tas2781_system_suspend(struct device *dev) +{ + struct tas2781_hda *tas_hda = dev_get_drvdata(dev); + int ret; + + ret = pm_runtime_force_suspend(dev); + if (ret) + return ret; + + /* Shutdown chip before system suspend */ + tasdevice_spi_tuning_switch(tas_hda->priv, 1); + + /* + * Reset GPIO may be shared, so cannot reset here. + * However beyond this point, amps may be powered down. + */ + return 0; +} + +static int tas2781_system_resume(struct device *dev) +{ + struct tas2781_hda *tas_hda = dev_get_drvdata(dev); + int ret, val; + + ret = pm_runtime_force_resume(dev); + if (ret) + return ret; + + guard(mutex)(&tas_hda->priv->codec_lock); + + ret = tasdevice_spi_dev_read(tas_hda->priv, TAS2781_REG_CLK_CONFIG, + &val); + if (ret < 0) + return ret; + + if (val == TAS2781_REG_CLK_CONFIG_RESET) { + tas_hda->priv->cur_book = -1; + tas_hda->priv->cur_conf = -1; + tas_hda->priv->cur_prog = -1; + + ret = tasdevice_spi_prmg_load(tas_hda->priv, 0); + if (ret < 0) { + dev_err(tas_hda->priv->dev, + "FW download failed = %d\n", ret); + return ret; + } + tas_hda->priv->apply_calibration(tas_hda->priv); + + if (tas_hda->priv->playback_started) + tasdevice_spi_tuning_switch(tas_hda->priv, 0); + } + + return ret; +} + +static const struct dev_pm_ops tas2781_hda_pm_ops = { + RUNTIME_PM_OPS(tas2781_runtime_suspend, tas2781_runtime_resume, NULL) + SYSTEM_SLEEP_PM_OPS(tas2781_system_suspend, tas2781_system_resume) +}; + +static const struct spi_device_id tas2781_hda_spi_id[] = { + { "tas2781-hda", }, + {} +}; + +static const struct acpi_device_id tas2781_acpi_hda_match[] = { + {"TXNW2781", }, + {} +}; +MODULE_DEVICE_TABLE(acpi, tas2781_acpi_hda_match); + +static struct spi_driver tas2781_hda_spi_driver = { + .driver = { + .name = "tas2781-hda", + .acpi_match_table = tas2781_acpi_hda_match, + .pm = &tas2781_hda_pm_ops, + }, + .id_table = tas2781_hda_spi_id, + .probe = tas2781_hda_spi_probe, + .remove = tas2781_hda_spi_remove, +}; +module_spi_driver(tas2781_hda_spi_driver); + +MODULE_DESCRIPTION("TAS2781 HDA SPI Driver"); +MODULE_AUTHOR("Baojun, Xu, <baojun.xug(a)ti.com>"); +MODULE_LICENSE("GPL"); diff --git a/sound/pci/hda/tas2781_spi_fwlib.c b/sound/pci/hda/tas2781_spi_fwlib.c new file mode 100644 index 000000000000..c98f9beb77a0 --- /dev/null +++ b/sound/pci/hda/tas2781_spi_fwlib.c @@ -0,0 +1,2006 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// TAS2781 HDA SPI driver +// +// Copyright 2024 Texas Instruments, Inc. +// +// Author: Baojun Xu <baojun.xu(a)ti.com> + +#include <asm/unaligned.h> +#include <linux/crc8.h> +#include <linux/firmware.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/tas2781-dsp.h> +#include <sound/tlv.h> + +#include "tas2781-spi.h" + +#define OFFSET_ERROR_BIT BIT(31) + +#define ERROR_PRAM_CRCCHK 0x0000000 +#define ERROR_YRAM_CRCCHK 0x0000001 +#define PPC_DRIVER_CRCCHK 0x00000200 + +#define TAS2781_SA_COEFF_SWAP_REG TASDEVICE_REG(0, 0x35, 0x2c) +#define TAS2781_YRAM_BOOK1 140 +#define TAS2781_YRAM1_PAGE 42 +#define TAS2781_YRAM1_START_REG 88 + +#define TAS2781_YRAM2_START_PAGE 43 +#define TAS2781_YRAM2_END_PAGE 49 +#define TAS2781_YRAM2_START_REG 8 +#define TAS2781_YRAM2_END_REG 127 + +#define TAS2781_YRAM3_PAGE 50 +#define TAS2781_YRAM3_START_REG 8 +#define TAS2781_YRAM3_END_REG 27 + +/* should not include B0_P53_R44-R47 */ +#define TAS2781_YRAM_BOOK2 0 +#define TAS2781_YRAM4_START_PAGE 50 +#define TAS2781_YRAM4_END_PAGE 60 + +#define TAS2781_YRAM5_PAGE 61 +#define TAS2781_YRAM5_START_REG TAS2781_YRAM3_START_REG +#define TAS2781_YRAM5_END_REG TAS2781_YRAM3_END_REG + +#define TASDEVICE_MAXPROGRAM_NUM_KERNEL 5 +#define TASDEVICE_MAXCONFIG_NUM_KERNEL_MULTIPLE_AMPS 64 +#define TASDEVICE_MAXCONFIG_NUM_KERNEL 10 +#define MAIN_ALL_DEVICES_1X 0x01 +#define MAIN_DEVICE_A_1X 0x02 +#define MAIN_DEVICE_B_1X 0x03 +#define MAIN_DEVICE_C_1X 0x04 +#define MAIN_DEVICE_D_1X 0x05 +#define COEFF_DEVICE_A_1X 0x12 +#define COEFF_DEVICE_B_1X 0x13 +#define COEFF_DEVICE_C_1X 0x14 +#define COEFF_DEVICE_D_1X 0x15 +#define PRE_DEVICE_A_1X 0x22 +#define PRE_DEVICE_B_1X 0x23 +#define PRE_DEVICE_C_1X 0x24 +#define PRE_DEVICE_D_1X 0x25 +#define PRE_SOFTWARE_RESET_DEVICE_A 0x41 +#define PRE_SOFTWARE_RESET_DEVICE_B 0x42 +#define PRE_SOFTWARE_RESET_DEVICE_C 0x43 +#define PRE_SOFTWARE_RESET_DEVICE_D 0x44 +#define POST_SOFTWARE_RESET_DEVICE_A 0x45 +#define POST_SOFTWARE_RESET_DEVICE_B 0x46 +#define POST_SOFTWARE_RESET_DEVICE_C 0x47 +#define POST_SOFTWARE_RESET_DEVICE_D 0x48 + +struct tas_crc { + unsigned char offset; + unsigned char len; +}; + +struct blktyp_devidx_map { + unsigned char blktyp; + unsigned char dev_idx; +}; + +/* fixed m68k compiling issue: mapping table can save code field */ +static const struct blktyp_devidx_map ppc3_tas2781_mapping_table[] = { + { MAIN_ALL_DEVICES_1X, 0x80 }, + { MAIN_DEVICE_A_1X, 0x81 }, + { COEFF_DEVICE_A_1X, 0x81 }, + { PRE_DEVICE_A_1X, 0x81 }, + { PRE_SOFTWARE_RESET_DEVICE_A, 0xC1 }, + { POST_SOFTWARE_RESET_DEVICE_A, 0xC1 }, + { MAIN_DEVICE_B_1X, 0x82 }, + { COEFF_DEVICE_B_1X, 0x82 }, + { PRE_DEVICE_B_1X, 0x82 }, + { PRE_SOFTWARE_RESET_DEVICE_B, 0xC2 }, + { POST_SOFTWARE_RESET_DEVICE_B, 0xC2 }, + { MAIN_DEVICE_C_1X, 0x83 }, + { COEFF_DEVICE_C_1X, 0x83 }, + { PRE_DEVICE_C_1X, 0x83 }, + { PRE_SOFTWARE_RESET_DEVICE_C, 0xC3 }, + { POST_SOFTWARE_RESET_DEVICE_C, 0xC3 }, + { MAIN_DEVICE_D_1X, 0x84 }, + { COEFF_DEVICE_D_1X, 0x84 }, + { PRE_DEVICE_D_1X, 0x84 }, + { PRE_SOFTWARE_RESET_DEVICE_D, 0xC4 }, + { POST_SOFTWARE_RESET_DEVICE_D, 0xC4 }, +}; + +static const struct blktyp_devidx_map ppc3_mapping_table[] = { + { MAIN_ALL_DEVICES_1X, 0x80 }, + { MAIN_DEVICE_A_1X, 0x81 }, + { COEFF_DEVICE_A_1X, 0xC1 }, + { PRE_DEVICE_A_1X, 0xC1 }, + { MAIN_DEVICE_B_1X, 0x82 }, + { COEFF_DEVICE_B_1X, 0xC2 }, + { PRE_DEVICE_B_1X, 0xC2 }, + { MAIN_DEVICE_C_1X, 0x83 }, + { COEFF_DEVICE_C_1X, 0xC3 }, + { PRE_DEVICE_C_1X, 0xC3 }, + { MAIN_DEVICE_D_1X, 0x84 }, + { COEFF_DEVICE_D_1X, 0xC4 }, + { PRE_DEVICE_D_1X, 0xC4 }, +}; + +static const struct blktyp_devidx_map non_ppc3_mapping_table[] = { + { MAIN_ALL_DEVICES, 0x80 }, + { MAIN_DEVICE_A, 0x81 }, + { COEFF_DEVICE_A, 0xC1 }, + { PRE_DEVICE_A, 0xC1 }, + { MAIN_DEVICE_B, 0x82 }, + { COEFF_DEVICE_B, 0xC2 }, + { PRE_DEVICE_B, 0xC2 }, + { MAIN_DEVICE_C, 0x83 }, + { COEFF_DEVICE_C, 0xC3 }, + { PRE_DEVICE_C, 0xC3 }, + { MAIN_DEVICE_D, 0x84 }, + { COEFF_DEVICE_D, 0xC4 }, + { PRE_DEVICE_D, 0xC4 }, +}; + +/* + * Device support different configurations for different scene, + * like voice, music, calibration, was write in regbin file. + * Will be stored into tas_priv after regbin was loaded. + */ +static struct tasdevice_config_info *tasdevice_add_config( + struct tasdevice_priv *tas_priv, unsigned char *config_data, + unsigned int config_size, int *status) +{ + struct tasdevice_config_info *cfg_info; + struct tasdev_blk_data **bk_da; + unsigned int config_offset = 0; + unsigned int i; + + /* + * In most projects are many audio cases, such as music, handfree, + * receiver, games, audio-to-haptics, PMIC record, bypass mode, + * portrait, landscape, etc. Even in multiple audios, one or + * two of the chips will work for the special case, such as + * ultrasonic application. In order to support these variable-numbers + * of audio cases, flexible configs have been introduced in the + * DSP firmware. + */ + cfg_info = kzalloc(sizeof(*cfg_info), GFP_KERNEL); + if (!cfg_info) { + *status = -ENOMEM; + return NULL; + } + + if (tas_priv->rcabin.fw_hdr.binary_version_num >= 0x105) { + if ((config_offset + 64) > config_size) { + *status = -EINVAL; + dev_err(tas_priv->dev, "add conf: Out of boundary\n"); + goto config_err; + } + config_offset += 64; + } + + if ((config_offset + 4) > config_size) { + *status = -EINVAL; + dev_err(tas_priv->dev, "add config: Out of boundary\n"); + goto config_err; + } + + /* + * convert data[offset], data[offset + 1], data[offset + 2] and + * data[offset + 3] into host + */ + cfg_info->nblocks = get_unaligned_be32(&config_data[config_offset]); + config_offset += 4; + + /* + * Several kinds of dsp/algorithm firmwares can run on tas2781, + * the number and size of blk are not fixed and different among + * these firmwares. + */ + bk_da = cfg_info->blk_data = kcalloc(cfg_info->nblocks, + sizeof(*bk_da), GFP_KERNEL); + if (!bk_da) { + *status = -ENOMEM; + goto config_err; + } + cfg_info->real_nblocks = 0; + for (i = 0; i < cfg_info->nblocks; i++) { + if (config_offset + 12 > config_size) { + *status = -EINVAL; + dev_err(tas_priv->dev, + "%s: Out of boundary: i = %d nblocks = %u!\n", + __func__, i, cfg_info->nblocks); + goto block_err; + } + bk_da[i] = kzalloc(sizeof(*bk_da[i]), GFP_KERNEL); + if (!bk_da[i]) { + *status = -ENOMEM; + goto block_err; + } + + bk_da[i]->dev_idx = config_data[config_offset]; + config_offset++; + + bk_da[i]->block_type = config_data[config_offset]; + config_offset++; + + bk_da[i]->yram_checksum = + get_unaligned_be16(&config_data[config_offset]); + config_offset += 2; + bk_da[i]->block_size = + get_unaligned_be32(&config_data[config_offset]); + config_offset += 4; + + bk_da[i]->n_subblks = + get_unaligned_be32(&config_data[config_offset]); + + config_offset += 4; + + if (config_offset + bk_da[i]->block_size > config_size) { + *status = -EINVAL; + dev_err(tas_priv->dev, + "%s: Out of boundary: i = %d blks = %u!\n", + __func__, i, cfg_info->nblocks); + goto block_err; + } + /* instead of kzalloc+memcpy */ + bk_da[i]->regdata = kmemdup(&config_data[config_offset], + bk_da[i]->block_size, GFP_KERNEL); + if (!bk_da[i]->regdata) { + *status = -ENOMEM; + i++; + goto block_err; + } + + config_offset += bk_da[i]->block_size; + cfg_info->real_nblocks += 1; + } + + return cfg_info; +block_err: + for (int j = 0; j < i; j++) + kfree(bk_da[j]); + kfree(bk_da); +config_err: + kfree(cfg_info); + return NULL; +} + +/* Regbin file parser function. */ +int tasdevice_spi_rca_parser(void *context, const struct firmware *fmw) +{ + struct tasdevice_priv *tas_priv = context; + struct tasdevice_config_info **cfg_info; + struct tasdevice_rca_hdr *fw_hdr; + struct tasdevice_rca *rca; + unsigned int total_config_sz = 0; + int offset = 0, ret = 0, i; + unsigned char *buf; + + rca = &tas_priv->rcabin; + fw_hdr = &rca->fw_hdr; + if (!fmw || !fmw->data) { + dev_err(tas_priv->dev, "Failed to read %s\n", + tas_priv->rca_binaryname); + tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; + return -EINVAL; + } + buf = (unsigned char *)fmw->data; + fw_hdr->img_sz = get_unaligned_be32(&buf[offset]); + offset += 4; + if (fw_hdr->img_sz != fmw->size) { + dev_err(tas_priv->dev, + "File size not match, %d %u", (int)fmw->size, + fw_hdr->img_sz); + tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; + return -EINVAL; + } + + fw_hdr->checksum = get_unaligned_be32(&buf[offset]); + offset += 4; + fw_hdr->binary_version_num = get_unaligned_be32(&buf[offset]); + if (fw_hdr->binary_version_num < 0x103) { + dev_err(tas_priv->dev, "File version 0x%04x is too low", + fw_hdr->binary_version_num); + tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; + return -EINVAL; + } + offset += 4; + fw_hdr->drv_fw_version = get_unaligned_be32(&buf[offset]); + offset += 8; + fw_hdr->plat_type = buf[offset++]; + fw_hdr->dev_family = buf[offset++]; + fw_hdr->reserve = buf[offset++]; + fw_hdr->ndev = buf[offset++]; + if (offset + TASDEVICE_DEVICE_SUM > fw_hdr->img_sz) { + dev_err(tas_priv->dev, "rca_ready: Out of boundary!\n"); + tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; + return -EINVAL; + } + + for (i = 0; i < TASDEVICE_DEVICE_SUM; i++, offset++) + fw_hdr->devs[i] = buf[offset]; + + fw_hdr->nconfig = get_unaligned_be32(&buf[offset]); + offset += 4; + + for (i = 0; i < TASDEVICE_CONFIG_SUM; i++) { + fw_hdr->config_size[i] = get_unaligned_be32(&buf[offset]); + offset += 4; + total_config_sz += fw_hdr->config_size[i]; + } + + if (fw_hdr->img_sz - total_config_sz != (unsigned int)offset) { + dev_err(tas_priv->dev, "Bin file err %d - %d != %d!\n", + fw_hdr->img_sz, total_config_sz, (int)offset); + tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; + return -EINVAL; + } + + cfg_info = kcalloc(fw_hdr->nconfig, sizeof(*cfg_info), GFP_KERNEL); + if (!cfg_info) { + tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; + return -ENOMEM; + } + rca->cfg_info = cfg_info; + rca->ncfgs = 0; + for (i = 0; i < (int)fw_hdr->nconfig; i++) { + rca->ncfgs += 1; + cfg_info[i] = tasdevice_add_config(tas_priv, &buf[offset], + fw_hdr->config_size[i], &ret); + if (ret) { + tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; + return ret; + } + offset += (int)fw_hdr->config_size[i]; + } + + return ret; +} + +/* fixed m68k compiling issue: mapping table can save code field */ +static unsigned char map_dev_idx(struct tasdevice_fw *tas_fmw, + struct tasdev_blk *block) +{ + struct blktyp_devidx_map *p = + (struct blktyp_devidx_map *)non_ppc3_mapping_table; + struct tasdevice_dspfw_hdr *fw_hdr = &tas_fmw->fw_hdr; + struct tasdevice_fw_fixed_hdr *fw_fixed_hdr = &fw_hdr->fixed_hdr; + int i, n = ARRAY_SIZE(non_ppc3_mapping_table); + unsigned char dev_idx = 0; + + if (fw_fixed_hdr->ppcver >= PPC3_VERSION_TAS2781) { + p = (struct blktyp_devidx_map *)ppc3_tas2781_mapping_table; + n = ARRAY_SIZE(ppc3_tas2781_mapping_table); + } else if (fw_fixed_hdr->ppcver >= PPC3_VERSION) { + p = (struct blktyp_devidx_map *)ppc3_mapping_table; + n = ARRAY_SIZE(ppc3_mapping_table); + } + + for (i = 0; i < n; i++) { + if (block->type == p[i].blktyp) { + dev_idx = p[i].dev_idx; + break; + } + } + + return dev_idx; +} + +/* Block parser function. */ +static int fw_parse_block_data_kernel(struct tasdevice_fw *tas_fmw, + struct tasdev_blk *block, const struct firmware *fmw, int offset) +{ + const unsigned char *data = fmw->data; + + if (offset + 16 > fmw->size) { + dev_err(tas_fmw->dev, "%s: File Size error\n", __func__); + return -EINVAL; + } + + /* + * Convert data[offset], data[offset + 1], data[offset + 2] and + * data[offset + 3] into host. + */ + block->type = get_unaligned_be32(&data[offset]); + offset += 4; + + block->is_pchksum_present = data[offset++]; + block->pchksum = data[offset++]; + block->is_ychksum_present = data[offset++]; + block->ychksum = data[offset++]; + block->blk_size = get_unaligned_be32(&data[offset]); + offset += 4; + block->nr_subblocks = get_unaligned_be32(&data[offset]); + offset += 4; + + /* + * Fixed m68k compiling issue: + * 1. mapping table can save code field. + * 2. storing the dev_idx as a member of block can reduce unnecessary + * time and system resource comsumption of dev_idx mapping every + * time the block data writing to the dsp. + */ + block->dev_idx = map_dev_idx(tas_fmw, block); + + if (offset + block->blk_size > fmw->size) { + dev_err(tas_fmw->dev, "%s: nSublocks error\n", __func__); + return -EINVAL; + } + /* instead of kzalloc+memcpy */ + block->data = kmemdup(&data[offset], block->blk_size, GFP_KERNEL); + if (!block->data) + return -ENOMEM; + + offset += block->blk_size; + + return offset; +} + +/* Data of block parser function. */ +static int fw_parse_data_kernel(struct tasdevice_fw *tas_fmw, + struct tasdevice_data *img_data, const struct firmware *fmw, + int offset) +{ + const unsigned char *data = fmw->data; + struct tasdev_blk *blk; + unsigned int i; + + if (offset + 4 > fmw->size) { + dev_err(tas_fmw->dev, "%s: File Size error\n", __func__); + return -EINVAL; + } + img_data->nr_blk = get_unaligned_be32(&data[offset]); + offset += 4; + + img_data->dev_blks = kcalloc(img_data->nr_blk, + sizeof(struct tasdev_blk), GFP_KERNEL); + if (!img_data->dev_blks) + return -ENOMEM; + + for (i = 0; i < img_data->nr_blk; i++) { + blk = &img_data->dev_blks[i]; + offset = fw_parse_block_data_kernel( + tas_fmw, blk, fmw, offset); + if (offset < 0) { + kfree(img_data->dev_blks); + return -EINVAL; + } + } + + return offset; +} + +/* Data of DSP program parser function. */ +static int fw_parse_program_data_kernel( + struct tasdevice_priv *tas_priv, struct tasdevice_fw *tas_fmw, + const struct firmware *fmw, int offset) +{ + struct tasdevice_prog *program; + unsigned int i; + + for (i = 0; i < tas_fmw->nr_programs; i++) { + program = &tas_fmw->programs[i]; + if (offset + 72 > fmw->size) { + dev_err(tas_priv->dev, "%s: mpName error\n", __func__); + return -EINVAL; + } + /* skip 72 unused byts */ + offset += 72; + + offset = fw_parse_data_kernel(tas_fmw, &program->dev_data, + fmw, offset); + if (offset < 0) + break; + } + + return offset; +} + +/* Data of DSP configurations parser function. */ +static int fw_parse_configuration_data_kernel(struct tasdevice_priv *tas_priv, + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) +{ + const unsigned char *data = fmw->data; + struct tasdevice_config *config; + unsigned int i; + + for (i = 0; i < tas_fmw->nr_configurations; i++) { + config = &tas_fmw->configs[i]; + if (offset + 80 > fmw->size) { + dev_err(tas_priv->dev, "%s: mpName error\n", __func__); + return -EINVAL; + } + memcpy(config->name, &data[offset], 64); + /* skip extra 16 bytes */ + offset += 80; + + offset = fw_parse_data_kernel(tas_fmw, &config->dev_data, + fmw, offset); + if (offset < 0) + break; + } + + return offset; +} + +/* DSP firmware file header parser function for early PPC3 firmware binary. */ +static int fw_parse_variable_header_kernel(struct tasdevice_priv *tas_priv, + const struct firmware *fmw, int offset) +{ + struct tasdevice_fw *tas_fmw = tas_priv->fmw; + struct tasdevice_dspfw_hdr *fw_hdr = &tas_fmw->fw_hdr; + struct tasdevice_config *config; + struct tasdevice_prog *program; + const unsigned char *buf = fmw->data; + unsigned short max_confs; + unsigned int i; + + if (offset + 12 + 4 * TASDEVICE_MAXPROGRAM_NUM_KERNEL > fmw->size) { + dev_err(tas_priv->dev, "%s: File Size error\n", __func__); + return -EINVAL; + } + fw_hdr->device_family = get_unaligned_be16(&buf[offset]); + if (fw_hdr->device_family != 0) { + dev_err(tas_priv->dev, "%s:not TAS device\n", __func__); + return -EINVAL; + } + offset += 2; + fw_hdr->device = get_unaligned_be16(&buf[offset]); + if (fw_hdr->device >= TASDEVICE_DSP_TAS_MAX_DEVICE || + fw_hdr->device == 6) { + dev_err(tas_priv->dev, "Unsupported dev %d\n", fw_hdr->device); + return -EINVAL; + } + offset += 2; + + tas_fmw->nr_programs = get_unaligned_be32(&buf[offset]); + offset += 4; + + if (tas_fmw->nr_programs == 0 || + tas_fmw->nr_programs > TASDEVICE_MAXPROGRAM_NUM_KERNEL) { + dev_err(tas_priv->dev, "mnPrograms is invalid\n"); + return -EINVAL; + } + + tas_fmw->programs = kcalloc(tas_fmw->nr_programs, + sizeof(*tas_fmw->programs), GFP_KERNEL); + if (!tas_fmw->programs) + return -ENOMEM; + + for (i = 0; i < tas_fmw->nr_programs; i++) { + program = &tas_fmw->programs[i]; + program->prog_size = get_unaligned_be32(&buf[offset]); + offset += 4; + } + + /* Skip the unused prog_size */ + offset += 4 * (TASDEVICE_MAXPROGRAM_NUM_KERNEL - tas_fmw->nr_programs); + + tas_fmw->nr_configurations = get_unaligned_be32(&buf[offset]); + offset += 4; + + /* + * The max number of config in firmware greater than 4 pieces of + * tas2781s is different from the one lower than 4 pieces of + * tas2781s. + */ + max_confs = TASDEVICE_MAXCONFIG_NUM_KERNEL; + if (tas_fmw->nr_configurations == 0 || + tas_fmw->nr_configurations > max_confs) { + dev_err(tas_priv->dev, "%s: Conf is invalid\n", __func__); + kfree(tas_fmw->programs); + return -EINVAL; + } + + if (offset + 4 * max_confs > fmw->size) { + dev_err(tas_priv->dev, "%s: mpConfigurations err\n", __func__); + kfree(tas_fmw->programs); + return -EINVAL; + } + + tas_fmw->configs = kcalloc(tas_fmw->nr_configurations, + sizeof(*tas_fmw->configs), GFP_KERNEL); + if (!tas_fmw->configs) { + kfree(tas_fmw->programs); + return -ENOMEM; + } + + for (i = 0; i < tas_fmw->nr_programs; i++) { + config = &tas_fmw->configs[i]; + config->cfg_size = get_unaligned_be32(&buf[offset]); + offset += 4; + } + + /* Skip the unused configs */ + offset += 4 * (max_confs - tas_fmw->nr_programs); + + return offset; +} + +/* + * In sub-block data, have three type sub-block: + * 1. Single byte write. + * 2. Multi-byte write. + * 3. Delay. + * 4. Bits update. + * This function perform single byte write to device. + */ +static int tasdevice_single_byte_wr(void *context, int dev_idx, + unsigned char *data, int sublocksize) +{ + struct tasdevice_priv *tas_priv = context; + unsigned short len = get_unaligned_be16(&data[2]); + int i, subblk_offset, rc; + + subblk_offset = 4; + if (subblk_offset + 4 * len > sublocksize) { + dev_err(tas_priv->dev, "process_block: Out of boundary\n"); + return 0; + } + + for (i = 0; i < len; i++) { + if (dev_idx == (tas_priv->index + 1) || dev_idx == 0) { + rc = tasdevice_spi_dev_write(tas_priv, + TASDEVICE_REG(data[subblk_offset], + data[subblk_offset + 1], + data[subblk_offset + 2]), + data[subblk_offset + 3]); + if (rc < 0) { + dev_err(tas_priv->dev, + "process_block: single write error\n"); + subblk_offset |= OFFSET_ERROR_BIT; + } + } + subblk_offset += 4; + } + + return subblk_offset; +} + +/* + * In sub-block data, have three type sub-block: + * 1. Single byte write. + * 2. Multi-byte write. + * 3. Delay. + * 4. Bits update. + * This function perform multi-write to device. + */ +static int tasdevice_burst_wr(void *context, int dev_idx, unsigned char *data, + int sublocksize) +{ + struct tasdevice_priv *tas_priv = context; + unsigned short len = get_unaligned_be16(&data[2]); + int subblk_offset, rc; + + subblk_offset = 4; + if (subblk_offset + 4 + len > sublocksize) { + dev_err(tas_priv->dev, "%s: BST Out of boundary\n", __func__); + subblk_offset |= OFFSET_ERROR_BIT; + } + if (len % 4) { + dev_err(tas_priv->dev, "%s:Bst-len(%u)not div by 4\n", + __func__, len); + subblk_offset |= OFFSET_ERROR_BIT; + } + + if (dev_idx == (tas_priv->index + 1) || dev_idx == 0) { + rc = tasdevice_spi_dev_bulk_write(tas_priv, + TASDEVICE_REG(data[subblk_offset], + data[subblk_offset + 1], + data[subblk_offset + 2]), + &data[subblk_offset + 4], len); + if (rc < 0) { + dev_err(tas_priv->dev, "%s: bulk_write error = %d\n", + __func__, rc); + subblk_offset |= OFFSET_ERROR_BIT; + } + } + subblk_offset += (len + 4); + + return subblk_offset; +} + +/* Just delay for ms.*/ +static int tasdevice_delay(void *context, int dev_idx, unsigned char *data, + int sublocksize) +{ + struct tasdevice_priv *tas_priv = context; + unsigned int sleep_time, subblk_offset = 2; + + if (subblk_offset + 2 > sublocksize) { + dev_err(tas_priv->dev, "%s: delay Out of boundary\n", + __func__); + subblk_offset |= OFFSET_ERROR_BIT; + } + if (dev_idx == (tas_priv->index + 1) || dev_idx == 0) { + sleep_time = get_unaligned_be16(&data[2]) * 1000; + fsleep(sleep_time); + } + subblk_offset += 2; + + return subblk_offset; +} + +/* + * In sub-block data, have three type sub-block: + * 1. Single byte write. + * 2. Multi-byte write. + * 3. Delay. + * 4. Bits update. + * This function perform bits update. + */ +static int tasdevice_field_wr(void *context, int dev_idx, unsigned char *data, + int sublocksize) +{ + struct tasdevice_priv *tas_priv = context; + int rc, subblk_offset = 2; + + if (subblk_offset + 6 > sublocksize) { + dev_err(tas_priv->dev, "%s: bit write Out of boundary\n", + __func__); + subblk_offset |= OFFSET_ERROR_BIT; + } + if (dev_idx == (tas_priv->index + 1) || dev_idx == 0) { + rc = tasdevice_spi_dev_update_bits(tas_priv, + TASDEVICE_REG(data[subblk_offset + 2], + data[subblk_offset + 3], + data[subblk_offset + 4]), + data[subblk_offset + 1], + data[subblk_offset + 5]); + if (rc < 0) { + dev_err(tas_priv->dev, "%s: update_bits error = %d\n", + __func__, rc); + subblk_offset |= OFFSET_ERROR_BIT; + } + } + subblk_offset += 6; + + return subblk_offset; +} + +/* Data block process function. */ +static int tasdevice_process_block(void *context, unsigned char *data, + unsigned char dev_idx, int sublocksize) +{ + struct tasdevice_priv *tas_priv = context; + int blktyp = dev_idx & 0xC0, subblk_offset; + unsigned char subblk_typ = data[1]; + + switch (subblk_typ) { + case TASDEVICE_CMD_SING_W: + subblk_offset = tasdevice_single_byte_wr(tas_priv, + dev_idx & 0x4f, data, sublocksize); + break; + case TASDEVICE_CMD_BURST: + subblk_offset = tasdevice_burst_wr(tas_priv, + dev_idx & 0x4f, data, sublocksize); + break; + case TASDEVICE_CMD_DELAY: + subblk_offset = tasdevice_delay(tas_priv, + dev_idx & 0x4f, data, sublocksize); + break; + case TASDEVICE_CMD_FIELD_W: + subblk_offset = tasdevice_field_wr(tas_priv, + dev_idx & 0x4f, data, sublocksize); + break; + default: + subblk_offset = 2; + break; + } + if (((subblk_offset & OFFSET_ERROR_BIT) != 0) && blktyp != 0) { + if (blktyp == 0x80) { + tas_priv->cur_prog = -1; + tas_priv->cur_conf = -1; + } else + tas_priv->cur_conf = -1; + } + subblk_offset &= ~OFFSET_ERROR_BIT; + + return subblk_offset; +} + +/* + * Device support different configurations for different scene, + * this function was used for choose different config. + */ +void tasdevice_spi_select_cfg_blk(void *pContext, int conf_no, + unsigned char block_type) +{ + struct tasdevice_priv *tas_priv = pContext; + struct tasdevice_rca *rca = &tas_priv->rcabin; + struct tasdevice_config_info **cfg_info = rca->cfg_info; + struct tasdev_blk_data **blk_data; + unsigned int j, k; + + if (conf_no >= rca->ncfgs || conf_no < 0 || !cfg_info) { + dev_err(tas_priv->dev, "conf_no should be not more than %u\n", + rca->ncfgs); + return; + } + blk_data = cfg_info[conf_no]->blk_data; + + for (j = 0; j < cfg_info[conf_no]->real_nblocks; j++) { + unsigned int length = 0, rc = 0; + + if (block_type > 5 || block_type < 2) { + dev_err(tas_priv->dev, + "block_type should be in range from 2 to 5\n"); + break; + } + if (block_type != blk_data[j]->block_type) + continue; + + for (k = 0; k < blk_data[j]->n_subblks; k++) { + tas_priv->is_loading = true; + + rc = tasdevice_process_block(tas_priv, + blk_data[j]->regdata + length, + blk_data[j]->dev_idx, + blk_data[j]->block_size - length); + length += rc; + if (blk_data[j]->block_size < length) { + dev_err(tas_priv->dev, + "%s: %u %u out of boundary\n", + __func__, length, + blk_data[j]->block_size); + break; + } + } + if (length != blk_data[j]->block_size) + dev_err(tas_priv->dev, "%s: %u %u size is not same\n", + __func__, length, blk_data[j]->block_size); + } +} + +/* Block process function. */ +static int tasdevice_load_block_kernel( + struct tasdevice_priv *tasdevice, struct tasdev_blk *block) +{ + const unsigned int blk_size = block->blk_size; + unsigned char *data = block->data; + unsigned int i, length; + + for (i = 0, length = 0; i < block->nr_subblocks; i++) { + int rc = tasdevice_process_block(tasdevice, data + length, + block->dev_idx, blk_size - length); + if (rc < 0) { + dev_err(tasdevice->dev, + "%s: %u %u sublock write error\n", + __func__, length, blk_size); + return rc; + } + length += rc; + if (blk_size < length) { + dev_err(tasdevice->dev, "%s: %u %u out of boundary\n", + __func__, length, blk_size); + rc = -ENOMEM; + return rc; + } + } + + return 0; +} + +/* DSP firmware file header parser function. */ +static int fw_parse_variable_hdr(struct tasdevice_priv *tas_priv, + struct tasdevice_dspfw_hdr *fw_hdr, + const struct firmware *fmw, int offset) +{ + const unsigned char *buf = fmw->data; + int len = strlen((char *)&buf[offset]); + + len++; + + if (offset + len + 8 > fmw->size) { + dev_err(tas_priv->dev, "%s: File Size error\n", __func__); + return -EINVAL; + } + + offset += len; + + fw_hdr->device_family = get_unaligned_be32(&buf[offset]); + if (fw_hdr->device_family != 0) { + dev_err(tas_priv->dev, "%s: not TAS device\n", __func__); + return -EINVAL; + } + offset += 4; + + fw_hdr->device = get_unaligned_be32(&buf[offset]); + if (fw_hdr->device >= TASDEVICE_DSP_TAS_MAX_DEVICE || + fw_hdr->device == 6) { + dev_err(tas_priv->dev, "Unsupported dev %d\n", fw_hdr->device); + return -EINVAL; + } + offset += 4; + fw_hdr->ndev = 1; + + return offset; +} + +/* DSP firmware file header parser function for size variabled header. */ +static int fw_parse_variable_header_git(struct tasdevice_priv + *tas_priv, const struct firmware *fmw, int offset) +{ + struct tasdevice_fw *tas_fmw = tas_priv->fmw; + struct tasdevice_dspfw_hdr *fw_hdr = &tas_fmw->fw_hdr; + + offset = fw_parse_variable_hdr(tas_priv, fw_hdr, fmw, offset); + + return offset; +} + +/* DSP firmware file block parser function. */ +static int fw_parse_block_data(struct tasdevice_fw *tas_fmw, + struct tasdev_blk *block, const struct firmware *fmw, int offset) +{ + unsigned char *data = (unsigned char *)fmw->data; + int n; + + if (offset + 8 > fmw->size) { + dev_err(tas_fmw->dev, "%s: Type error\n", __func__); + return -EINVAL; + } + block->type = get_unaligned_be32(&data[offset]); + offset += 4; + + if (tas_fmw->fw_hdr.fixed_hdr.drv_ver >= PPC_DRIVER_CRCCHK) { + if (offset + 8 > fmw->size) { + dev_err(tas_fmw->dev, "PChkSumPresent error\n"); + return -EINVAL; + } + block->is_pchksum_present = data[offset]; + offset++; + + block->pchksum = data[offset]; + offset++; + + block->is_ychksum_present = data[offset]; + offset++; + + block->ychksum = data[offset]; + offset++; + } else { + block->is_pchksum_present = 0; + block->is_ychksum_present = 0; + } + + block->nr_cmds = get_unaligned_be32(&data[offset]); + offset += 4; + + n = block->nr_cmds * 4; + if (offset + n > fmw->size) { + dev_err(tas_fmw->dev, + "%s: File Size(%lu) error offset = %d n = %d\n", + __func__, (unsigned long)fmw->size, offset, n); + return -EINVAL; + } + /* instead of kzalloc+memcpy */ + block->data = kmemdup(&data[offset], n, GFP_KERNEL); + if (!block->data) + return -ENOMEM; + + offset += n; + + return offset; +} + +/* + * When parsing error occurs, all the memory resource will be released + * in the end of tasdevice_rca_ready. + */ +static int fw_parse_data(struct tasdevice_fw *tas_fmw, + struct tasdevice_data *img_data, const struct firmware *fmw, + int offset) +{ + const unsigned char *data = (unsigned char *)fmw->data; + struct tasdev_blk *blk; + unsigned int i, n; + + if (offset + 64 > fmw->size) { + dev_err(tas_fmw->dev, "%s: Name error\n", __func__); + return -EINVAL; + } + memcpy(img_data->name, &data[offset], 64); + offset += 64; + + n = strlen((char *)&data[offset]); + n++; + if (offset + n + 2 > fmw->size) { + dev_err(tas_fmw->dev, "%s: Description error\n", __func__); + return -EINVAL; + } + offset += n; + img_data->nr_blk = get_unaligned_be16(&data[offset]); + offset += 2; + + img_data->dev_blks = kcalloc(img_data->nr_blk, + sizeof(*img_data->dev_blks), GFP_KERNEL); + if (!img_data->dev_blks) + return -ENOMEM; + + for (i = 0; i < img_data->nr_blk; i++) { + blk = &img_data->dev_blks[i]; + offset = fw_parse_block_data(tas_fmw, blk, fmw, offset); + if (offset < 0) + return -EINVAL; + } + + return offset; +} + +/* + * When parsing error occurs, all the memory resource will be released + * in the end of tasdevice_rca_ready. + */ +static int fw_parse_program_data(struct tasdevice_priv *tas_priv, + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) +{ + unsigned char *buf = (unsigned char *)fmw->data; + struct tasdevice_prog *program; + int i; + + if (offset + 2 > fmw->size) { + dev_err(tas_priv->dev, "%s: File Size error\n", __func__); + return -EINVAL; + } + tas_fmw->nr_programs = get_unaligned_be16(&buf[offset]); + offset += 2; + + if (tas_fmw->nr_programs == 0) { + /* Not error in calibration Data file, return directly */ + dev_dbg(tas_priv->dev, "%s: No Programs data, maybe calbin\n", + __func__); + return offset; + } + + tas_fmw->programs = + kcalloc(tas_fmw->nr_programs, sizeof(*tas_fmw->programs), + GFP_KERNEL); + if (!tas_fmw->programs) + return -ENOMEM; + + for (i = 0; i < tas_fmw->nr_programs; i++) { + int n = 0; + + program = &tas_fmw->programs[i]; + if (offset + 64 > fmw->size) { + dev_err(tas_priv->dev, "%s: mpName error\n", __func__); + return -EINVAL; + } + offset += 64; + + n = strlen((char *)&buf[offset]); + /* skip '\0' and 5 unused bytes */ + n += 6; + if (offset + n > fmw->size) { + dev_err(tas_priv->dev, "Description err\n"); + return -EINVAL; + } + + offset += n; + + offset = fw_parse_data(tas_fmw, &program->dev_data, fmw, + offset); + if (offset < 0) + return offset; + } + + return offset; +} + +/* + * When parsing error occurs, all the memory resource will be released + * in the end of tasdevice_rca_ready. + */ +static int fw_parse_configuration_data(struct tasdevice_priv *tas_priv, + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) +{ + unsigned char *data = (unsigned char *)fmw->data; + struct tasdevice_config *config; + unsigned int i, n; + + if (offset + 2 > fmw->size) { + dev_err(tas_priv->dev, "%s: File Size error\n", __func__); + return -EINVAL; + } + tas_fmw->nr_configurations = get_unaligned_be16(&data[offset]); + offset += 2; + + if (tas_fmw->nr_configurations == 0) { + dev_err(tas_priv->dev, "%s: Conf is zero\n", __func__); + /* Not error for calibration Data file, return directly */ + return offset; + } + tas_fmw->configs = kcalloc(tas_fmw->nr_configurations, + sizeof(*tas_fmw->configs), GFP_KERNEL); + if (!tas_fmw->configs) + return -ENOMEM; + for (i = 0; i < tas_fmw->nr_configurations; i++) { + config = &tas_fmw->configs[i]; + if (offset + 64 > fmw->size) { + dev_err(tas_priv->dev, "File Size err\n"); + return -EINVAL; + } + memcpy(config->name, &data[offset], 64); + offset += 64; + + n = strlen((char *)&data[offset]); + n += 15; + if (offset + n > fmw->size) { + dev_err(tas_priv->dev, "Description err\n"); + return -EINVAL; + } + offset += n; + offset = fw_parse_data(tas_fmw, &config->dev_data, + fmw, offset); + if (offset < 0) + break; + } + + return offset; +} + +/* yram5 page check. */ +static bool check_inpage_yram_rg(struct tas_crc *cd, + unsigned char reg, unsigned char len) +{ + bool in = false; + + if (reg <= TAS2781_YRAM5_END_REG && + reg >= TAS2781_YRAM5_START_REG) { + if (reg + len > TAS2781_YRAM5_END_REG) + cd->len = TAS2781_YRAM5_END_REG - reg + 1; + else + cd->len = len; + cd->offset = reg; + in = true; + } else if (reg < TAS2781_YRAM5_START_REG) { + if (reg + len > TAS2781_YRAM5_START_REG) { + cd->offset = TAS2781_YRAM5_START_REG; + cd->len = len - TAS2781_YRAM5_START_REG + reg; + in = true; + } + } + + return in; +} + +/* DSP firmware yram block check. */ +static bool check_inpage_yram_bk1(struct tas_crc *cd, + unsigned char page, unsigned char reg, unsigned char len) +{ + bool in = false; + + if (page == TAS2781_YRAM1_PAGE) { + if (reg >= TAS2781_YRAM1_START_REG) { + cd->offset = reg; + cd->len = len; + in = true; + } else if (reg + len > TAS2781_YRAM1_START_REG) { + cd->offset = TAS2781_YRAM1_START_REG; + cd->len = len - TAS2781_YRAM1_START_REG + reg; + in = true; + } + } else if (page == TAS2781_YRAM3_PAGE) { + in = check_inpage_yram_rg(cd, reg, len); + } + + return in; +} + +/* + * Return Code: + * true -- the registers are in the inpage yram + * false -- the registers are NOT in the inpage yram + */ +static bool check_inpage_yram(struct tas_crc *cd, unsigned char book, + unsigned char page, unsigned char reg, unsigned char len) +{ + bool in = false; + + if (book == TAS2781_YRAM_BOOK1) + in = check_inpage_yram_bk1(cd, page, reg, len); + else if (book == TAS2781_YRAM_BOOK2 && page == TAS2781_YRAM5_PAGE) + in = check_inpage_yram_rg(cd, reg, len); + + return in; +} + +/* yram4 page check. */ +static bool check_inblock_yram_bk(struct tas_crc *cd, + unsigned char page, unsigned char reg, unsigned char len) +{ + bool in = false; + + if ((page >= TAS2781_YRAM4_START_PAGE && + page <= TAS2781_YRAM4_END_PAGE) || + (page >= TAS2781_YRAM2_START_PAGE && + page <= TAS2781_YRAM2_END_PAGE)) { + if (reg <= TAS2781_YRAM2_END_REG && + reg >= TAS2781_YRAM2_START_REG) { + cd->offset = reg; + cd->len = len; + in = true; + } else if (reg < TAS2781_YRAM2_START_REG) { + if (reg + len - 1 >= TAS2781_YRAM2_START_REG) { + cd->offset = TAS2781_YRAM2_START_REG; + cd->len = reg + len - TAS2781_YRAM2_START_REG; + in = true; + } + } + } + + return in; +} + +/* + * Return Code: + * true -- the registers are in the inblock yram + * false -- the registers are NOT in the inblock yram + */ +static bool check_inblock_yram(struct tas_crc *cd, unsigned char book, + unsigned char page, unsigned char reg, unsigned char len) +{ + bool in = false; + + if (book == TAS2781_YRAM_BOOK1 || book == TAS2781_YRAM_BOOK2) + in = check_inblock_yram_bk(cd, page, reg, len); + + return in; +} + +/* yram page check. */ +static bool check_yram(struct tas_crc *cd, unsigned char book, + unsigned char page, unsigned char reg, unsigned char len) +{ + bool in; + + in = check_inpage_yram(cd, book, page, reg, len); + if (!in) + in = check_inblock_yram(cd, book, page, reg, len); + + return in; +} + +/* Checksum for data block. */ +static int tasdev_multibytes_chksum(struct tasdevice_priv *tasdevice, + unsigned char book, unsigned char page, + unsigned char reg, unsigned int len) +{ + struct tas_crc crc_data; + unsigned char crc_chksum = 0; + unsigned char nBuf1[128]; + int ret = 0, i; + bool in; + + if ((reg + len - 1) > 127) { + ret = -EINVAL; + dev_err(tasdevice->dev, "firmware error\n"); + goto end; + } + + if ((book == TASDEVICE_BOOK_ID(TAS2781_SA_COEFF_SWAP_REG)) && + (page == TASDEVICE_PAGE_ID(TAS2781_SA_COEFF_SWAP_REG)) && + (reg == TASDEVICE_REG_ID(TAS2781_SA_COEFF_SWAP_REG)) && + (len == 4)) { + /* DSP swap command, pass */ + ret = 0; + goto end; + } + + in = check_yram(&crc_data, book, page, reg, len); + if (!in) + goto end; + + if (len == 1) { + dev_err(tasdevice->dev, "firmware error\n"); + ret = -EINVAL; + goto end; + } + + ret = tasdevice_spi_dev_bulk_read(tasdevice, + TASDEVICE_REG(book, page, crc_data.offset), + nBuf1, crc_data.len); + if (ret < 0) + goto end; + + for (i = 0; i < crc_data.len; i++) { + if ((book == TASDEVICE_BOOK_ID(TAS2781_SA_COEFF_SWAP_REG)) && + (page == TASDEVICE_PAGE_ID(TAS2781_SA_COEFF_SWAP_REG)) && + ((i + crc_data.offset) >= + TASDEVICE_REG_ID(TAS2781_SA_COEFF_SWAP_REG)) && + ((i + crc_data.offset) <= + (TASDEVICE_REG_ID(TAS2781_SA_COEFF_SWAP_REG) + 4))) + /* DSP swap command, bypass */ + continue; + else + crc_chksum += crc8(tasdevice->crc8_lkp_tbl, &nBuf1[i], + 1, 0); + } + + ret = crc_chksum; + +end: + return ret; +} + +/* Checksum for single register. */ +static int do_singlereg_checksum(struct tasdevice_priv *tasdevice, + unsigned char book, unsigned char page, + unsigned char reg, unsigned char val) +{ + struct tas_crc crc_data; + unsigned int nData1; + int ret = 0; + bool in; + + /* DSP swap command, pass */ + if ((book == TASDEVICE_BOOK_ID(TAS2781_SA_COEFF_SWAP_REG)) && + (page == TASDEVICE_PAGE_ID(TAS2781_SA_COEFF_SWAP_REG)) && + (reg >= TASDEVICE_REG_ID(TAS2781_SA_COEFF_SWAP_REG)) && + (reg <= (TASDEVICE_REG_ID(TAS2781_SA_COEFF_SWAP_REG) + 4))) + return 0; + + in = check_yram(&crc_data, book, page, reg, 1); + if (!in) + return 0; + ret = tasdevice_spi_dev_read(tasdevice, + TASDEVICE_REG(book, page, reg), &nData1); + if (ret < 0) + return ret; + + if (nData1 != val) { + dev_err(tasdevice->dev, + "B[0x%x]P[0x%x]R[0x%x] W[0x%x], R[0x%x]\n", + book, page, reg, val, nData1); + tasdevice->err_code |= ERROR_YRAM_CRCCHK; + return -EAGAIN; + } + + ret = crc8(tasdevice->crc8_lkp_tbl, &val, 1, 0); + + return ret; +} + +/* Block type check. */ +static void set_err_prg_cfg(unsigned int type, struct tasdevice_priv *p) +{ + if ((type == MAIN_ALL_DEVICES) || (type == MAIN_DEVICE_A) || + (type == MAIN_DEVICE_B) || (type == MAIN_DEVICE_C) || + (type == MAIN_DEVICE_D)) + p->cur_prog = -1; + else + p->cur_conf = -1; +} + +/* Checksum for data bytes. */ +static int tasdev_bytes_chksum(struct tasdevice_priv *tas_priv, + struct tasdev_blk *block, unsigned char book, + unsigned char page, unsigned char reg, unsigned int len, + unsigned char val, unsigned char *crc_chksum) +{ + int ret; + + if (len > 1) + ret = tasdev_multibytes_chksum(tas_priv, book, page, reg, + len); + else + ret = do_singlereg_checksum(tas_priv, book, page, reg, val); + + if (ret > 0) { + *crc_chksum += ret; + goto end; + } + + if (ret != -EAGAIN) + goto end; + + block->nr_retry--; + if (block->nr_retry > 0) + goto end; + + set_err_prg_cfg(block->type, tas_priv); + +end: + return ret; +} + +/* Multi-data byte write. */ +static int tasdev_multibytes_wr(struct tasdevice_priv *tas_priv, + struct tasdev_blk *block, unsigned char book, + unsigned char page, unsigned char reg, unsigned char *data, + unsigned int len, unsigned int *nr_cmds, + unsigned char *crc_chksum) +{ + int ret; + + if (len > 1) { + ret = tasdevice_spi_dev_bulk_write(tas_priv, + TASDEVICE_REG(book, page, reg), data + 3, len); + if (ret < 0) + return ret; + if (block->is_ychksum_present) + ret = tasdev_bytes_chksum(tas_priv, block, + book, page, reg, len, 0, crc_chksum); + } else { + ret = tasdevice_spi_dev_write(tas_priv, + TASDEVICE_REG(book, page, reg), data[3]); + if (ret < 0) + return ret; + if (block->is_ychksum_present) + ret = tasdev_bytes_chksum(tas_priv, block, book, + page, reg, 1, data[3], crc_chksum); + } + + if (!block->is_ychksum_present || ret >= 0) { + *nr_cmds += 1; + if (len >= 2) + *nr_cmds += ((len - 2) / 4) + 1; + } + + return ret; +} + +/* Checksum for block. */ +static int tasdev_block_chksum(struct tasdevice_priv *tas_priv, + struct tasdev_blk *block) +{ + unsigned int nr_value; + int ret; + + ret = tasdevice_spi_dev_read(tas_priv, TASDEVICE_CHECKSUM, &nr_value); + if (ret < 0) { + dev_err(tas_priv->dev, "%s: read error %d.\n", __func__, ret); + set_err_prg_cfg(block->type, tas_priv); + return ret; + } + + if ((nr_value & 0xff) != block->pchksum) { + dev_err(tas_priv->dev, "%s: PChkSum err %d ", __func__, ret); + dev_err(tas_priv->dev, "PChkSum = 0x%x, Reg = 0x%x\n", + block->pchksum, (nr_value & 0xff)); + tas_priv->err_code |= ERROR_PRAM_CRCCHK; + ret = -EAGAIN; + block->nr_retry--; + + if (block->nr_retry <= 0) + set_err_prg_cfg(block->type, tas_priv); + } else { + tas_priv->err_code &= ~ERROR_PRAM_CRCCHK; + } + + return ret; +} + +/* Firmware block load function. */ +static int tasdev_load_blk(struct tasdevice_priv *tas_priv, + struct tasdev_blk *block) +{ + unsigned int sleep_time, len, nr_cmds; + unsigned char offset, book, page, val; + unsigned char *data = block->data; + unsigned char crc_chksum = 0; + int ret = 0; + + while (block->nr_retry > 0) { + if (block->is_pchksum_present) { + ret = tasdevice_spi_dev_write(tas_priv, + TASDEVICE_CHECKSUM, 0); + if (ret < 0) + break; + } + + if (block->is_ychksum_present) + crc_chksum = 0; + + nr_cmds = 0; + + while (nr_cmds < block->nr_cmds) { + data = block->data + nr_cmds * 4; + + book = data[0]; + page = data[1]; + offset = data[2]; + val = data[3]; + + nr_cmds++; + /* Single byte write */ + if (offset <= 0x7F) { + ret = tasdevice_spi_dev_write(tas_priv, + TASDEVICE_REG(book, page, offset), + val); + if (ret < 0) + break; + if (block->is_ychksum_present) { + ret = tasdev_bytes_chksum(tas_priv, + block, book, page, offset, + 1, val, &crc_chksum); + if (ret < 0) + break; + } + continue; + } + /* sleep command */ + if (offset == 0x81) { + /* book -- data[0] page -- data[1] */ + sleep_time = ((book << 8) + page)*1000; + fsleep(sleep_time); + continue; + } + /* Multiple bytes write */ + if (offset == 0x85) { + data += 4; + len = (book << 8) + page; + book = data[0]; + page = data[1]; + offset = data[2]; + ret = tasdev_multibytes_wr(tas_priv, + block, book, page, offset, data, + len, &nr_cmds, &crc_chksum); + if (ret < 0) + break; + } + } + if (ret == -EAGAIN) { + if (block->nr_retry > 0) + continue; + } else if (ret < 0) { + /* err in current device, skip it */ + break; + } + + if (block->is_pchksum_present) { + ret = tasdev_block_chksum(tas_priv, block); + if (ret == -EAGAIN) { + if (block->nr_retry > 0) + continue; + } else if (ret < 0) { + /* err in current device, skip it */ + break; + } + } + + if (block->is_ychksum_present) { + /* TBD, open it when FW ready */ + dev_err(tas_priv->dev, + "Blk YChkSum: FW = 0x%x, YCRC = 0x%x\n", + block->ychksum, crc_chksum); + + tas_priv->err_code &= + ~ERROR_YRAM_CRCCHK; + ret = 0; + } + /* skip current blk */ + break; + } + + return ret; +} + +/* Firmware block load function. */ +static int tasdevice_load_block(struct tasdevice_priv *tas_priv, + struct tasdev_blk *block) +{ + int ret = 0; + + block->nr_retry = 6; + if (tas_priv->is_loading == false) + return 0; + ret = tasdev_load_blk(tas_priv, block); + if (ret < 0) + dev_err(tas_priv->dev, "Blk (%d) load error\n", block->type); + + return ret; +} + +/* + * Select firmware binary parser & load callback functions by ppc3 version + * and firmware binary version. + */ +static int dspfw_default_callback(struct tasdevice_priv *tas_priv, + unsigned int drv_ver, unsigned int ppcver) +{ + int rc = 0; + + if (drv_ver == 0x100) { + if (ppcver >= PPC3_VERSION) { + tas_priv->fw_parse_variable_header = + fw_parse_variable_header_kernel; + tas_priv->fw_parse_program_data = + fw_parse_program_data_kernel; + tas_priv->fw_parse_configuration_data = + fw_parse_configuration_data_kernel; + tas_priv->tasdevice_load_block = + tasdevice_load_block_kernel; + } else if (ppcver == 0x00) { + tas_priv->fw_parse_variable_header = + fw_parse_variable_header_git; + tas_priv->fw_parse_program_data = + fw_parse_program_data; + tas_priv->fw_parse_configuration_data = + fw_parse_configuration_data; + tas_priv->tasdevice_load_block = + tasdevice_load_block; + } else { + dev_err(tas_priv->dev, + "Wrong PPCVer :0x%08x\n", ppcver); + rc = -EINVAL; + } + } else { + dev_err(tas_priv->dev, "Wrong DrvVer : 0x%02x\n", drv_ver); + rc = -EINVAL; + } + + return rc; +} + +/* DSP firmware binary file header parser function. */ +static int fw_parse_header(struct tasdevice_priv *tas_priv, + struct tasdevice_fw *tas_fmw, const struct firmware *fmw, int offset) +{ + struct tasdevice_dspfw_hdr *fw_hdr = &tas_fmw->fw_hdr; + struct tasdevice_fw_fixed_hdr *fw_fixed_hdr = &fw_hdr->fixed_hdr; + static const unsigned char magic_number[] = {0x35, 0x35, 0x35, 0x32, }; + const unsigned char *buf = (unsigned char *)fmw->data; + + if (offset + 92 > fmw->size) { + dev_err(tas_priv->dev, "%s: File Size error\n", __func__); + offset = -EINVAL; + goto out; + } + if (memcmp(&buf[offset], magic_number, 4)) { + dev_err(tas_priv->dev, "%s: Magic num NOT match\n", __func__); + offset = -EINVAL; + goto out; + } + offset += 4; + + /* + * Convert data[offset], data[offset + 1], data[offset + 2] and + * data[offset + 3] into host + */ + fw_fixed_hdr->fwsize = get_unaligned_be32(&buf[offset]); + offset += 4; + if (fw_fixed_hdr->fwsize != fmw->size) { + dev_err(tas_priv->dev, "File size not match, %lu %u", + (unsigned long)fmw->size, fw_fixed_hdr->fwsize); + offset = -EINVAL; + goto out; + } + offset += 4; + fw_fixed_hdr->ppcver = get_unaligned_be32(&buf[offset]); + offset += 8; + fw_fixed_hdr->drv_ver = get_unaligned_be32(&buf[offset]); + offset += 72; + +out: + return offset; +} + +/* DSP firmware binary file parser function. */ +static int tasdevice_dspfw_ready(const struct firmware *fmw, void *context) +{ + struct tasdevice_priv *tas_priv = context; + struct tasdevice_fw_fixed_hdr *fw_fixed_hdr; + struct tasdevice_fw *tas_fmw; + int offset = 0, ret = 0; + + if (!fmw || !fmw->data) { + dev_err(tas_priv->dev, "%s: Failed to read firmware %s\n", + __func__, tas_priv->coef_binaryname); + return -EINVAL; + } + + tas_priv->fmw = kzalloc(sizeof(*tas_priv->fmw), GFP_KERNEL); + if (!tas_priv->fmw) + return -ENOMEM; + tas_fmw = tas_priv->fmw; + tas_fmw->dev = tas_priv->dev; + offset = fw_parse_header(tas_priv, tas_fmw, fmw, offset); + + if (offset == -EINVAL) + return -EINVAL; + + fw_fixed_hdr = &tas_fmw->fw_hdr.fixed_hdr; + /* Support different versions of firmware */ + switch (fw_fixed_hdr->drv_ver) { + case 0x301: + case 0x302: + case 0x502: + case 0x503: + tas_priv->fw_parse_variable_header = + fw_parse_variable_header_kernel; + tas_priv->fw_parse_program_data = + fw_parse_program_data_kernel; + tas_priv->fw_parse_configuration_data = + fw_parse_configuration_data_kernel; + tas_priv->tasdevice_load_block = + tasdevice_load_block_kernel; + break; + case 0x202: + case 0x400: + tas_priv->fw_parse_variable_header = + fw_parse_variable_header_git; + tas_priv->fw_parse_program_data = + fw_parse_program_data; + tas_priv->fw_parse_configuration_data = + fw_parse_configuration_data; + tas_priv->tasdevice_load_block = + tasdevice_load_block; + break; + default: + ret = dspfw_default_callback(tas_priv, + fw_fixed_hdr->drv_ver, fw_fixed_hdr->ppcver); + if (ret) + return ret; + break; + } + + offset = tas_priv->fw_parse_variable_header(tas_priv, fmw, offset); + if (offset < 0) + return offset; + + offset = tas_priv->fw_parse_program_data(tas_priv, tas_fmw, fmw, + offset); + if (offset < 0) + return offset; + + offset = tas_priv->fw_parse_configuration_data(tas_priv, + tas_fmw, fmw, offset); + if (offset < 0) + ret = offset; + + return ret; +} + +/* DSP firmware binary file parser function. */ +int tasdevice_spi_dsp_parser(void *context) +{ + struct tasdevice_priv *tas_priv = context; + const struct firmware *fw_entry; + int ret; + + ret = request_firmware(&fw_entry, tas_priv->coef_binaryname, + tas_priv->dev); + if (ret) { + dev_err(tas_priv->dev, "%s: load %s error\n", __func__, + tas_priv->coef_binaryname); + return ret; + } + + ret = tasdevice_dspfw_ready(fw_entry, tas_priv); + release_firmware(fw_entry); + fw_entry = NULL; + + return ret; +} + +/* DSP firmware program block data remove function. */ +static void tasdev_dsp_prog_blk_remove(struct tasdevice_prog *prog) +{ + struct tasdevice_data *tas_dt; + struct tasdev_blk *blk; + unsigned int i; + + if (!prog) + return; + + tas_dt = &prog->dev_data; + + if (!tas_dt->dev_blks) + return; + + for (i = 0; i < tas_dt->nr_blk; i++) { + blk = &tas_dt->dev_blks[i]; + kfree(blk->data); + } + kfree(tas_dt->dev_blks); +} + +/* DSP firmware program block data remove function. */ +static void tasdev_dsp_prog_remove(struct tasdevice_prog *prog, + unsigned short nr) +{ + int i; + + for (i = 0; i < nr; i++) + tasdev_dsp_prog_blk_remove(&prog[i]); + kfree(prog); +} + +/* DSP firmware config block data remove function. */ +static void tasdev_dsp_cfg_blk_remove(struct tasdevice_config *cfg) +{ + struct tasdevice_data *tas_dt; + struct tasdev_blk *blk; + unsigned int i; + + if (cfg) { + tas_dt = &cfg->dev_data; + + if (!tas_dt->dev_blks) + return; + + for (i = 0; i < tas_dt->nr_blk; i++) { + blk = &tas_dt->dev_blks[i]; + kfree(blk->data); + } + kfree(tas_dt->dev_blks); + } +} + +/* DSP firmware config remove function. */ +static void tasdev_dsp_cfg_remove(struct tasdevice_config *config, + unsigned short nr) +{ + int i; + + for (i = 0; i < nr; i++) + tasdev_dsp_cfg_blk_remove(&config[i]); + kfree(config); +} + +/* DSP firmware remove function. */ +void tasdevice_spi_dsp_remove(void *context) +{ + struct tasdevice_priv *tas_dev = context; + + if (!tas_dev->fmw) + return; + + if (tas_dev->fmw->programs) + tasdev_dsp_prog_remove(tas_dev->fmw->programs, + tas_dev->fmw->nr_programs); + if (tas_dev->fmw->configs) + tasdev_dsp_cfg_remove(tas_dev->fmw->configs, + tas_dev->fmw->nr_configurations); + kfree(tas_dev->fmw); + tas_dev->fmw = NULL; +} + +/* DSP firmware calibration data remove function. */ +static void tas2781_clear_calfirmware(struct tasdevice_fw *tas_fmw) +{ + struct tasdevice_calibration *calibration; + struct tasdev_blk *block; + unsigned int blks; + int i; + + if (!tas_fmw->calibrations) + goto out; + + for (i = 0; i < tas_fmw->nr_calibrations; i++) { + calibration = &tas_fmw->calibrations[i]; + if (!calibration) + continue; + + if (!calibration->dev_data.dev_blks) + continue; + + for (blks = 0; blks < calibration->dev_data.nr_blk; blks++) { + block = &calibration->dev_data.dev_blks[blks]; + if (!block) + continue; + kfree(block->data); + } + kfree(calibration->dev_data.dev_blks); + } + kfree(tas_fmw->calibrations); +out: + kfree(tas_fmw); +} + +/* Calibration data from firmware remove function. */ +void tasdevice_spi_calbin_remove(void *context) +{ + struct tasdevice_priv *tas_priv = context; + + if (tas_priv->cali_data_fmw) { + tas2781_clear_calfirmware(tas_priv->cali_data_fmw); + tas_priv->cali_data_fmw = NULL; + } +} + +/* Configuration remove function. */ +void tasdevice_spi_config_info_remove(void *context) +{ + struct tasdevice_priv *tas_priv = context; + struct tasdevice_rca *rca = &tas_priv->rcabin; + struct tasdevice_config_info **ci = rca->cfg_info; + unsigned int i, j; + + if (!ci) + return; + for (i = 0; i < rca->ncfgs; i++) { + if (!ci[i]) + continue; + if (ci[i]->blk_data) { + for (j = 0; j < ci[i]->real_nblocks; j++) { + if (!ci[i]->blk_data[j]) + continue; + kfree(ci[i]->blk_data[j]->regdata); + kfree(ci[i]->blk_data[j]); + } + kfree(ci[i]->blk_data); + } + kfree(ci[i]); + } + kfree(ci); +} + +/* DSP firmware program block data load function. */ +static int tasdevice_load_data(struct tasdevice_priv *tas_priv, + struct tasdevice_data *dev_data) +{ + struct tasdev_blk *block; + unsigned int i; + int ret = 0; + + for (i = 0; i < dev_data->nr_blk; i++) { + block = &dev_data->dev_blks[i]; + ret = tas_priv->tasdevice_load_block(tas_priv, block); + if (ret < 0) + break; + } + + return ret; +} + +/* DSP firmware program load interface function. */ +int tasdevice_spi_prmg_load(void *context, int prm_no) +{ + struct tasdevice_priv *tas_priv = context; + struct tasdevice_fw *tas_fmw = tas_priv->fmw; + struct tasdevice_prog *program; + struct tasdevice_config *conf; + int ret = 0; + + if (!tas_fmw) { + dev_err(tas_priv->dev, "%s: Firmware is NULL\n", __func__); + return -EINVAL; + } + if (prm_no >= 0 && prm_no <= tas_fmw->nr_programs) { + tas_priv->cur_conf = 0; + tas_priv->is_loading = true; + program = &tas_fmw->programs[prm_no]; + ret = tasdevice_load_data(tas_priv, &program->dev_data); + if (ret < 0) { + dev_err(tas_priv->dev, "Program failed %d.\n", ret); + return ret; + } + tas_priv->cur_prog = prm_no; + + conf = &tas_fmw->configs[tas_priv->cur_conf]; + ret = tasdevice_load_data(tas_priv, &conf->dev_data); + if (ret < 0) + dev_err(tas_priv->dev, "Config failed %d.\n", ret); + } else { + dev_err(tas_priv->dev, + "%s: prm(%d) is not in range of Programs %u\n", + __func__, prm_no, tas_fmw->nr_programs); + return -EINVAL; + } + + return ret; +} + +/* RCABIN configuration switch interface function. */ +void tasdevice_spi_tuning_switch(void *context, int state) +{ + struct tasdevice_priv *tas_priv = context; + int profile_cfg_id = tas_priv->rcabin.profile_cfg_id; + + if (tas_priv->fw_state == TASDEVICE_DSP_FW_FAIL) { + dev_err(tas_priv->dev, "DSP bin file not loaded\n"); + return; + } + + if (state == 0) + tasdevice_spi_select_cfg_blk(tas_priv, profile_cfg_id, + TASDEVICE_BIN_BLK_PRE_POWER_UP); + else + tasdevice_spi_select_cfg_blk(tas_priv, profile_cfg_id, + TASDEVICE_BIN_BLK_PRE_SHUTDOWN); +} -- 2.40.1

3 2

[PATCH] ASoC: topology: Fix route memory corruption
by Amadeusz Sławiński 15 Aug '24

15 Aug '24

It was reported that recent fix for memory corruption during topology load, causes corruption in other cases. Instead of being overeager with checking topology, assume that it is properly formatted and just duplicate strings. Reported-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Closes: https://lore.kernel.org/linux-sound/171812236450.201359.3019210915105428447… Suggested-by: Péter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski(a)linux.intel.com> --- sound/soc/soc-topology.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c index 0225bc5fc425a..4b166294602fa 100644 --- a/sound/soc/soc-topology.c +++ b/sound/soc/soc-topology.c @@ -1052,21 +1052,15 @@ static int soc_tplg_dapm_graph_elems_load(struct soc_tplg *tplg, break; } - route->source = devm_kmemdup(tplg->dev, elem->source, - min(strlen(elem->source), maxlen), - GFP_KERNEL); - route->sink = devm_kmemdup(tplg->dev, elem->sink, - min(strlen(elem->sink), maxlen), - GFP_KERNEL); + route->source = devm_kstrdup(tplg->dev, elem->source, GFP_KERNEL); + route->sink = devm_kstrdup(tplg->dev, elem->sink, GFP_KERNEL); if (!route->source || !route->sink) { ret = -ENOMEM; break; } if (strnlen(elem->control, maxlen) != 0) { - route->control = devm_kmemdup(tplg->dev, elem->control, - min(strlen(elem->control), maxlen), - GFP_KERNEL); + route->control = devm_kstrdup(tplg->dev, elem->control, GFP_KERNEL); if (!route->control) { ret = -ENOMEM; break; -- 2.34.1

5 6

[PATCH] ASoC: soc-pcm: remove snd_soc_dpcm_stream_{lock/unlock}_irq()
by Kuninori Morimoto 14 Aug '24

14 Aug '24

soc-pcm.c has snd_soc_dpcm_stream_{lock/unlock}_irq() helper function, but it is almost nothing help. It just makes a code complex. Let's remove it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> --- sound/soc/soc-pcm.c | 25 +++++++------------------ 1 file changed, 7 insertions(+), 18 deletions(-) diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index bad823718ae47..58381801e41d4 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -49,21 +49,9 @@ static inline int _soc_pcm_ret(struct snd_soc_pcm_runtime *rtd, return ret; } -static inline void snd_soc_dpcm_stream_lock_irq(struct snd_soc_pcm_runtime *rtd, - int stream) -{ - snd_pcm_stream_lock_irq(snd_soc_dpcm_get_substream(rtd, stream)); -} - #define snd_soc_dpcm_stream_lock_irqsave_nested(rtd, stream, flags) \ snd_pcm_stream_lock_irqsave_nested(snd_soc_dpcm_get_substream(rtd, stream), flags) -static inline void snd_soc_dpcm_stream_unlock_irq(struct snd_soc_pcm_runtime *rtd, - int stream) -{ - snd_pcm_stream_unlock_irq(snd_soc_dpcm_get_substream(rtd, stream)); -} - #define snd_soc_dpcm_stream_unlock_irqrestore(rtd, stream, flags) \ snd_pcm_stream_unlock_irqrestore(snd_soc_dpcm_get_substream(rtd, stream), flags) @@ -260,14 +248,14 @@ static void dpcm_set_fe_update_state(struct snd_soc_pcm_runtime *fe, struct snd_pcm_substream *substream = snd_soc_dpcm_get_substream(fe, stream); - snd_soc_dpcm_stream_lock_irq(fe, stream); + snd_pcm_stream_lock_irq(substream); if (state == SND_SOC_DPCM_UPDATE_NO && fe->dpcm[stream].trigger_pending) { dpcm_fe_dai_do_trigger(substream, fe->dpcm[stream].trigger_pending - 1); fe->dpcm[stream].trigger_pending = 0; } fe->dpcm[stream].runtime_update = state; - snd_soc_dpcm_stream_unlock_irq(fe, stream); + snd_pcm_stream_unlock_irq(substream); } static void dpcm_set_be_update_state(struct snd_soc_pcm_runtime *be, @@ -1272,10 +1260,10 @@ static int dpcm_be_connect(struct snd_soc_pcm_runtime *fe, dpcm->be = be; dpcm->fe = fe; dpcm->state = SND_SOC_DPCM_LINK_STATE_NEW; - snd_soc_dpcm_stream_lock_irq(fe, stream); + snd_pcm_stream_lock_irq(fe_substream); list_add(&dpcm->list_be, &fe->dpcm[stream].be_clients); list_add(&dpcm->list_fe, &be->dpcm[stream].fe_clients); - snd_soc_dpcm_stream_unlock_irq(fe, stream); + snd_pcm_stream_unlock_irq(fe_substream); dev_dbg(fe->dev, "connected new DPCM %s path %s %s %s\n", stream ? "capture" : "playback", fe->dai_link->name, @@ -1320,11 +1308,12 @@ static void dpcm_be_reparent(struct snd_soc_pcm_runtime *fe, void dpcm_be_disconnect(struct snd_soc_pcm_runtime *fe, int stream) { struct snd_soc_dpcm *dpcm, *d; + struct snd_pcm_substream *substream = snd_soc_dpcm_get_substream(fe, stream); LIST_HEAD(deleted_dpcms); snd_soc_dpcm_mutex_assert_held(fe); - snd_soc_dpcm_stream_lock_irq(fe, stream); + snd_pcm_stream_lock_irq(substream); for_each_dpcm_be_safe(fe, stream, dpcm, d) { dev_dbg(fe->dev, "ASoC: BE %s disconnect check for %s\n", stream ? "capture" : "playback", @@ -1343,7 +1332,7 @@ void dpcm_be_disconnect(struct snd_soc_pcm_runtime *fe, int stream) list_del(&dpcm->list_be); list_move(&dpcm->list_fe, &deleted_dpcms); } - snd_soc_dpcm_stream_unlock_irq(fe, stream); + snd_pcm_stream_unlock_irq(substream); while (!list_empty(&deleted_dpcms)) { dpcm = list_first_entry(&deleted_dpcms, struct snd_soc_dpcm, -- 2.43.0

2 1

[PATCH v1] ASoc: tas2781: Add Calibration Kcontrols for Chromebook
by Shenghao Ding 14 Aug '24

14 Aug '24

Add calibration related kcontrol for speaker impedance calibration and speaker leakage check for Chromebook Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- v1: - Add TAS2563 into the Header of tas2781-comlib.c - Add channel no into the log for error debug - | Reported-by: kernel test robot <lkp(a)intel.com> | Closes: https://urldefense.com/v3/__https://lore.kernel.org/oe-kbuild-all/202407131… - Create tas2563-tlv.h into include/sound - Move tas2563_dvc_table from tas2781-tlv.h to tas2563-tlv.h - Add "#include <sound/tas2563-tlv.h>" into tas2781-i2c.c - Correct the filename in the header comments of tas2781-comlib.c, remove the wrong file name. - renamae tasdevice_chn_switch to put it in a single line - With inverted check this entire function becomes neater in tasdev_chn_switch. - With all possible restrictions this can be on a single line besides the fact that the second one currently has a broken indentation. - remove unnecessary parentheses. - linux/* followed by asm/* as the latter is not so generic as the former. - leave the trailing comma - replace scnprintf with strscpy if necessary. - Add registers for TAS2563 and TAS2781 calibration. - Add cali_data_restore for regsiter restore after calibration. - Add is_user_space_calidata to store the flag where the calibrated from, user space or bin file from driver parsing. - Add TASDEVICE_RCA_FW_OK to support only register setting bin in the device. - Add tas2563_dvc_table for relationship between tas2563 digtial gains and register values. - tasdevice_chn_switch for chip switch among multiple chips(tas2563 or tas2781) - Add loading the calibrated values from user space in tasdev_load_calibrated_data - Correct no dsp no work, it can still work in bypass mode. - Add calibrated register setting for tas2563&tas2781. - Add mutex into each kcontrol. - Rename tas2781_force_fwload_get, tas2781_force_fwload_put--> tasdev_force_fwload_get, tasdev_force_fwload_put - Define tas2781_snd_control and tas2563_snd_control for volume - Define tas2781_cali_control and tas2563_cali_control for calibration --- include/sound/tas2563-tlv.h | 279 +++++++++ include/sound/tas2781-tlv.h | 260 --------- include/sound/tas2781.h | 72 +++ sound/soc/codecs/tas2781-comlib.c | 32 +- sound/soc/codecs/tas2781-fmwlib.c | 39 +- sound/soc/codecs/tas2781-i2c.c | 907 ++++++++++++++++++++++++++++-- 6 files changed, 1267 insertions(+), 322 deletions(-) create mode 100644 include/sound/tas2563-tlv.h diff --git a/include/sound/tas2563-tlv.h b/include/sound/tas2563-tlv.h new file mode 100644 index 000000000000..2dab81a4c359 --- /dev/null +++ b/include/sound/tas2563-tlv.h @@ -0,0 +1,279 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +// +// ALSA SoC Texas Instruments TAS2563 Audio Smart Amplifier +// +// Copyright (C) 2022 - 2024 Texas Instruments Incorporated +// https://www.ti.com +// +// The TAS2563 driver implements a flexible and configurable +// algo coefficient setting for one, two, or even multiple +// TAS2563 chips. +// +// Author: Shenghao Ding <shenghao-ding(a)ti.com> +// + +#ifndef __TAS2563_TLV_H__ +#define __TAS2563_TLV_H__ + +static const DECLARE_TLV_DB_SCALE(tas2563_dvc_tlv, -12150, 50, 1); + +/* pow(10, db/20) * pow(2,30) */ +static const unsigned char tas2563_dvc_table[][4] = { + { 0X00, 0X00, 0X00, 0X00 }, /* -121.5db */ + { 0X00, 0X00, 0X03, 0XBC }, /* -121.0db */ + { 0X00, 0X00, 0X03, 0XF5 }, /* -120.5db */ + { 0X00, 0X00, 0X04, 0X31 }, /* -120.0db */ + { 0X00, 0X00, 0X04, 0X71 }, /* -119.5db */ + { 0X00, 0X00, 0X04, 0XB4 }, /* -119.0db */ + { 0X00, 0X00, 0X04, 0XFC }, /* -118.5db */ + { 0X00, 0X00, 0X05, 0X47 }, /* -118.0db */ + { 0X00, 0X00, 0X05, 0X97 }, /* -117.5db */ + { 0X00, 0X00, 0X05, 0XEC }, /* -117.0db */ + { 0X00, 0X00, 0X06, 0X46 }, /* -116.5db */ + { 0X00, 0X00, 0X06, 0XA5 }, /* -116.0db */ + { 0X00, 0X00, 0X07, 0X0A }, /* -115.5db */ + { 0X00, 0X00, 0X07, 0X75 }, /* -115.0db */ + { 0X00, 0X00, 0X07, 0XE6 }, /* -114.5db */ + { 0X00, 0X00, 0X08, 0X5E }, /* -114.0db */ + { 0X00, 0X00, 0X08, 0XDD }, /* -113.5db */ + { 0X00, 0X00, 0X09, 0X63 }, /* -113.0db */ + { 0X00, 0X00, 0X09, 0XF2 }, /* -112.5db */ + { 0X00, 0X00, 0X0A, 0X89 }, /* -112.0db */ + { 0X00, 0X00, 0X0B, 0X28 }, /* -111.5db */ + { 0X00, 0X00, 0X0B, 0XD2 }, /* -111.0db */ + { 0X00, 0X00, 0X0C, 0X85 }, /* -110.5db */ + { 0X00, 0X00, 0X0D, 0X43 }, /* -110.0db */ + { 0X00, 0X00, 0X0E, 0X0C }, /* -109.5db */ + { 0X00, 0X00, 0X0E, 0XE1 }, /* -109.0db */ + { 0X00, 0X00, 0X0F, 0XC3 }, /* -108.5db */ + { 0X00, 0X00, 0X10, 0XB2 }, /* -108.0db */ + { 0X00, 0X00, 0X11, 0XAF }, /* -107.5db */ + { 0X00, 0X00, 0X12, 0XBC }, /* -107.0db */ + { 0X00, 0X00, 0X13, 0XD8 }, /* -106.5db */ + { 0X00, 0X00, 0X15, 0X05 }, /* -106.0db */ + { 0X00, 0X00, 0X16, 0X44 }, /* -105.5db */ + { 0X00, 0X00, 0X17, 0X96 }, /* -105.0db */ + { 0X00, 0X00, 0X18, 0XFB }, /* -104.5db */ + { 0X00, 0X00, 0X1A, 0X76 }, /* -104.0db */ + { 0X00, 0X00, 0X1C, 0X08 }, /* -103.5db */ + { 0X00, 0X00, 0X1D, 0XB1 }, /* -103.0db */ + { 0X00, 0X00, 0X1F, 0X73 }, /* -102.5db */ + { 0X00, 0X00, 0X21, 0X51 }, /* -102.0db */ + { 0X00, 0X00, 0X23, 0X4A }, /* -101.5db */ + { 0X00, 0X00, 0X25, 0X61 }, /* -101.0db */ + { 0X00, 0X00, 0X27, 0X98 }, /* -100.5db */ + { 0X00, 0X00, 0X29, 0XF1 }, /* -100.0db */ + { 0X00, 0X00, 0X2C, 0X6D }, /* -99.5db */ + { 0X00, 0X00, 0X2F, 0X0F }, /* -99.0db */ + { 0X00, 0X00, 0X31, 0XD9 }, /* -98.5db */ + { 0X00, 0X00, 0X34, 0XCD }, /* -98.0db */ + { 0X00, 0X00, 0X37, 0XEE }, /* -97.5db */ + { 0X00, 0X00, 0X3B, 0X3F }, /* -97.0db */ + { 0X00, 0X00, 0X3E, 0XC1 }, /* -96.5db */ + { 0X00, 0X00, 0X42, 0X79 }, /* -96.0db */ + { 0X00, 0X00, 0X46, 0X6A }, /* -95.5db */ + { 0X00, 0X00, 0X4A, 0X96 }, /* -95.0db */ + { 0X00, 0X00, 0X4F, 0X01 }, /* -94.5db */ + { 0X00, 0X00, 0X53, 0XAF }, /* -94.0db */ + { 0X00, 0X00, 0X58, 0XA5 }, /* -93.5db */ + { 0X00, 0X00, 0X5D, 0XE6 }, /* -93.0db */ + { 0X00, 0X00, 0X63, 0X76 }, /* -92.5db */ + { 0X00, 0X00, 0X69, 0X5B }, /* -92.0db */ + { 0X00, 0X00, 0X6F, 0X99 }, /* -91.5db */ + { 0X00, 0X00, 0X76, 0X36 }, /* -91.0db */ + { 0X00, 0X00, 0X7D, 0X37 }, /* -90.5db */ + { 0X00, 0X00, 0X84, 0XA2 }, /* -90.0db */ + { 0X00, 0X00, 0X8C, 0X7E }, /* -89.5db */ + { 0X00, 0X00, 0X94, 0XD1 }, /* -89.0db */ + { 0X00, 0X00, 0X9D, 0XA3 }, /* -88.5db */ + { 0X00, 0X00, 0XA6, 0XFA }, /* -88.0db */ + { 0X00, 0X00, 0XB0, 0XDF }, /* -87.5db */ + { 0X00, 0X00, 0XBB, 0X5A }, /* -87.0db */ + { 0X00, 0X00, 0XC6, 0X74 }, /* -86.5db */ + { 0X00, 0X00, 0XD2, 0X36 }, /* -86.0db */ + { 0X00, 0X00, 0XDE, 0XAB }, /* -85.5db */ + { 0X00, 0X00, 0XEB, 0XDC }, /* -85.0db */ + { 0X00, 0X00, 0XF9, 0XD6 }, /* -84.5db */ + { 0X00, 0X01, 0X08, 0XA4 }, /* -84.0db */ + { 0X00, 0X01, 0X18, 0X52 }, /* -83.5db */ + { 0X00, 0X01, 0X28, 0XEF }, /* -83.0db */ + { 0X00, 0X01, 0X3A, 0X87 }, /* -82.5db */ + { 0X00, 0X01, 0X4D, 0X2A }, /* -82.0db */ + { 0X00, 0X01, 0X60, 0XE8 }, /* -81.5db */ + { 0X00, 0X01, 0X75, 0XD1 }, /* -81.0db */ + { 0X00, 0X01, 0X8B, 0XF7 }, /* -80.5db */ + { 0X00, 0X01, 0XA3, 0X6E }, /* -80.0db */ + { 0X00, 0X01, 0XBC, 0X48 }, /* -79.5db */ + { 0X00, 0X01, 0XD6, 0X9B }, /* -79.0db */ + { 0X00, 0X01, 0XF2, 0X7E }, /* -78.5db */ + { 0X00, 0X02, 0X10, 0X08 }, /* -78.0db */ + { 0X00, 0X02, 0X2F, 0X51 }, /* -77.5db */ + { 0X00, 0X02, 0X50, 0X76 }, /* -77.0db */ + { 0X00, 0X02, 0X73, 0X91 }, /* -76.5db */ + { 0X00, 0X02, 0X98, 0XC0 }, /* -76.0db */ + { 0X00, 0X02, 0XC0, 0X24 }, /* -75.5db */ + { 0X00, 0X02, 0XE9, 0XDD }, /* -75.0db */ + { 0X00, 0X03, 0X16, 0X0F }, /* -74.5db */ + { 0X00, 0X03, 0X44, 0XDF }, /* -74.0db */ + { 0X00, 0X03, 0X76, 0X76 }, /* -73.5db */ + { 0X00, 0X03, 0XAA, 0XFC }, /* -73.0db */ + { 0X00, 0X03, 0XE2, 0XA0 }, /* -72.5db */ + { 0X00, 0X04, 0X1D, 0X8F }, /* -72.0db */ + { 0X00, 0X04, 0X5B, 0XFD }, /* -71.5db */ + { 0X00, 0X04, 0X9E, 0X1D }, /* -71.0db */ + { 0X00, 0X04, 0XE4, 0X29 }, /* -70.5db */ + { 0X00, 0X05, 0X2E, 0X5A }, /* -70.0db */ + { 0X00, 0X05, 0X7C, 0XF2 }, /* -69.5db */ + { 0X00, 0X05, 0XD0, 0X31 }, /* -69.0db */ + { 0X00, 0X06, 0X28, 0X60 }, /* -68.5db */ + { 0X00, 0X06, 0X85, 0XC8 }, /* -68.0db */ + { 0X00, 0X06, 0XE8, 0XB9 }, /* -67.5db */ + { 0X00, 0X07, 0X51, 0X86 }, /* -67.0db */ + { 0X00, 0X07, 0XC0, 0X8A }, /* -66.5db */ + { 0X00, 0X08, 0X36, 0X21 }, /* -66.0db */ + { 0X00, 0X08, 0XB2, 0XB0 }, /* -65.5db */ + { 0X00, 0X09, 0X36, 0XA1 }, /* -65.0db */ + { 0X00, 0X09, 0XC2, 0X63 }, /* -64.5db */ + { 0X00, 0X0A, 0X56, 0X6D }, /* -64.0db */ + { 0X00, 0X0A, 0XF3, 0X3C }, /* -63.5db */ + { 0X00, 0X0B, 0X99, 0X56 }, /* -63.0db */ + { 0X00, 0X0C, 0X49, 0X48 }, /* -62.5db */ + { 0X00, 0X0D, 0X03, 0XA7 }, /* -62.0db */ + { 0X00, 0X0D, 0XC9, 0X11 }, /* -61.5db */ + { 0X00, 0X0E, 0X9A, 0X2D }, /* -61.0db */ + { 0X00, 0X0F, 0X77, 0XAD }, /* -60.5db */ + { 0X00, 0X10, 0X62, 0X4D }, /* -60.0db */ + { 0X00, 0X11, 0X5A, 0XD5 }, /* -59.5db */ + { 0X00, 0X12, 0X62, 0X16 }, /* -59.0db */ + { 0X00, 0X13, 0X78, 0XF0 }, /* -58.5db */ + { 0X00, 0X14, 0XA0, 0X50 }, /* -58.0db */ + { 0X00, 0X15, 0XD9, 0X31 }, /* -57.5db */ + { 0X00, 0X17, 0X24, 0X9C }, /* -57.0db */ + { 0X00, 0X18, 0X83, 0XAA }, /* -56.5db */ + { 0X00, 0X19, 0XF7, 0X86 }, /* -56.0db */ + { 0X00, 0X1B, 0X81, 0X6A }, /* -55.5db */ + { 0X00, 0X1D, 0X22, 0XA4 }, /* -55.0db */ + { 0X00, 0X1E, 0XDC, 0X98 }, /* -54.5db */ + { 0X00, 0X20, 0XB0, 0XBC }, /* -54.0db */ + { 0X00, 0X22, 0XA0, 0X9D }, /* -53.5db */ + { 0X00, 0X24, 0XAD, 0XE0 }, /* -53.0db */ + { 0X00, 0X26, 0XDA, 0X43 }, /* -52.5db */ + { 0X00, 0X29, 0X27, 0X9D }, /* -52.0db */ + { 0X00, 0X2B, 0X97, 0XE3 }, /* -51.5db */ + { 0X00, 0X2E, 0X2D, 0X27 }, /* -51.0db */ + { 0X00, 0X30, 0XE9, 0X9A }, /* -50.5db */ + { 0X00, 0X33, 0XCF, 0X8D }, /* -50.0db */ + { 0X00, 0X36, 0XE1, 0X78 }, /* -49.5db */ + { 0X00, 0X3A, 0X21, 0XF3 }, /* -49.0db */ + { 0X00, 0X3D, 0X93, 0XC3 }, /* -48.5db */ + { 0X00, 0X41, 0X39, 0XD3 }, /* -48.0db */ + { 0X00, 0X45, 0X17, 0X3B }, /* -47.5db */ + { 0X00, 0X49, 0X2F, 0X44 }, /* -47.0db */ + { 0X00, 0X4D, 0X85, 0X66 }, /* -46.5db */ + { 0X00, 0X52, 0X1D, 0X50 }, /* -46.0db */ + { 0X00, 0X56, 0XFA, 0XE8 }, /* -45.5db */ + { 0X00, 0X5C, 0X22, 0X4E }, /* -45.0db */ + { 0X00, 0X61, 0X97, 0XE1 }, /* -44.5db */ + { 0X00, 0X67, 0X60, 0X44 }, /* -44.0db */ + { 0X00, 0X6D, 0X80, 0X60 }, /* -43.5db */ + { 0X00, 0X73, 0XFD, 0X65 }, /* -43.0db */ + { 0X00, 0X7A, 0XDC, 0XD7 }, /* -42.5db */ + { 0X00, 0X82, 0X24, 0X8A }, /* -42.0db */ + { 0X00, 0X89, 0XDA, 0XAB }, /* -41.5db */ + { 0X00, 0X92, 0X05, 0XC6 }, /* -41.0db */ + { 0X00, 0X9A, 0XAC, 0XC8 }, /* -40.5db */ + { 0X00, 0XA3, 0XD7, 0X0A }, /* -40.0db */ + { 0X00, 0XAD, 0X8C, 0X52 }, /* -39.5db */ + { 0X00, 0XB7, 0XD4, 0XDD }, /* -39.0db */ + { 0X00, 0XC2, 0XB9, 0X65 }, /* -38.5db */ + { 0X00, 0XCE, 0X43, 0X28 }, /* -38.0db */ + { 0X00, 0XDA, 0X7B, 0XF1 }, /* -37.5db */ + { 0X00, 0XE7, 0X6E, 0X1E }, /* -37.0db */ + { 0X00, 0XF5, 0X24, 0XAC }, /* -36.5db */ + { 0X01, 0X03, 0XAB, 0X3D }, /* -36.0db */ + { 0X01, 0X13, 0X0E, 0X24 }, /* -35.5db */ + { 0X01, 0X23, 0X5A, 0X71 }, /* -35.0db */ + { 0X01, 0X34, 0X9D, 0XF8 }, /* -34.5db */ + { 0X01, 0X46, 0XE7, 0X5D }, /* -34.0db */ + { 0X01, 0X5A, 0X46, 0X27 }, /* -33.5db */ + { 0X01, 0X6E, 0XCA, 0XC5 }, /* -33.0db */ + { 0X01, 0X84, 0X86, 0X9F }, /* -32.5db */ + { 0X01, 0X9B, 0X8C, 0X27 }, /* -32.0db */ + { 0X01, 0XB3, 0XEE, 0XE5 }, /* -31.5db */ + { 0X01, 0XCD, 0XC3, 0X8C }, /* -31.0db */ + { 0X01, 0XE9, 0X20, 0X05 }, /* -30.5db */ + { 0X02, 0X06, 0X1B, 0X89 }, /* -30.0db */ + { 0X02, 0X24, 0XCE, 0XB0 }, /* -29.5db */ + { 0X02, 0X45, 0X53, 0X85 }, /* -29.0db */ + { 0X02, 0X67, 0XC5, 0XA2 }, /* -28.5db */ + { 0X02, 0X8C, 0X42, 0X3F }, /* -28.0db */ + { 0X02, 0XB2, 0XE8, 0X55 }, /* -27.5db */ + { 0X02, 0XDB, 0XD8, 0XAD }, /* -27.0db */ + { 0X03, 0X07, 0X36, 0X05 }, /* -26.5db */ + { 0X03, 0X35, 0X25, 0X29 }, /* -26.0db */ + { 0X03, 0X65, 0XCD, 0X13 }, /* -25.5db */ + { 0X03, 0X99, 0X57, 0X0C }, /* -25.0db */ + { 0X03, 0XCF, 0XEE, 0XCF }, /* -24.5db */ + { 0X04, 0X09, 0XC2, 0XB0 }, /* -24.0db */ + { 0X04, 0X47, 0X03, 0XC1 }, /* -23.5db */ + { 0X04, 0X87, 0XE5, 0XFB }, /* -23.0db */ + { 0X04, 0XCC, 0XA0, 0X6D }, /* -22.5db */ + { 0X05, 0X15, 0X6D, 0X68 }, /* -22.0db */ + { 0X05, 0X62, 0X8A, 0XB3 }, /* -21.5db */ + { 0X05, 0XB4, 0X39, 0XBC }, /* -21.0db */ + { 0X06, 0X0A, 0XBF, 0XD4 }, /* -20.5db */ + { 0X06, 0X66, 0X66, 0X66 }, /* -20.0db */ + { 0X06, 0XC7, 0X7B, 0X36 }, /* -19.5db */ + { 0X07, 0X2E, 0X50, 0XA6 }, /* -19.0db */ + { 0X07, 0X9B, 0X3D, 0XF6 }, /* -18.5db */ + { 0X08, 0X0E, 0X9F, 0X96 }, /* -18.0db */ + { 0X08, 0X88, 0XD7, 0X6D }, /* -17.5db */ + { 0X09, 0X0A, 0X4D, 0X2F }, /* -17.0db */ + { 0X09, 0X93, 0X6E, 0XB8 }, /* -16.5db */ + { 0X0A, 0X24, 0XB0, 0X62 }, /* -16.0db */ + { 0X0A, 0XBE, 0X8D, 0X70 }, /* -15.5db */ + { 0X0B, 0X61, 0X88, 0X71 }, /* -15.0db */ + { 0X0C, 0X0E, 0X2B, 0XB0 }, /* -14.5db */ + { 0X0C, 0XC5, 0X09, 0XAB }, /* -14.0db */ + { 0X0D, 0X86, 0XBD, 0X8D }, /* -13.5db */ + { 0X0E, 0X53, 0XEB, 0XB3 }, /* -13.0db */ + { 0X0F, 0X2D, 0X42, 0X38 }, /* -12.5db */ + { 0X10, 0X13, 0X79, 0X87 }, /* -12.0db */ + { 0X11, 0X07, 0X54, 0XF9 }, /* -11.5db */ + { 0X12, 0X09, 0XA3, 0X7A }, /* -11.0db */ + { 0X13, 0X1B, 0X40, 0X39 }, /* -10.5db */ + { 0X14, 0X3D, 0X13, 0X62 }, /* -10.0db */ + { 0X15, 0X70, 0X12, 0XE1 }, /* -9.5db */ + { 0X16, 0XB5, 0X43, 0X37 }, /* -9.0db */ + { 0X18, 0X0D, 0XB8, 0X54 }, /* -8.5db */ + { 0X19, 0X7A, 0X96, 0X7F }, /* -8.0db */ + { 0X1A, 0XFD, 0X13, 0X54 }, /* -7.5db */ + { 0X1C, 0X96, 0X76, 0XC6 }, /* -7.0db */ + { 0X1E, 0X48, 0X1C, 0X37 }, /* -6.5db */ + { 0X20, 0X13, 0X73, 0X9E }, /* -6.0db */ + { 0X21, 0XFA, 0X02, 0XBF }, /* -5.5db */ + { 0X23, 0XFD, 0X66, 0X78 }, /* -5.0db */ + { 0X26, 0X1F, 0X54, 0X1C }, /* -4.5db */ + { 0X28, 0X61, 0X9A, 0XE9 }, /* -4.0db */ + { 0X2A, 0XC6, 0X25, 0X91 }, /* -3.5db */ + { 0X2D, 0X4E, 0XFB, 0XD5 }, /* -3.0db */ + { 0X2F, 0XFE, 0X44, 0X48 }, /* -2.5db */ + { 0X32, 0XD6, 0X46, 0X17 }, /* -2.0db */ + { 0X35, 0XD9, 0X6B, 0X02 }, /* -1.5db */ + { 0X39, 0X0A, 0X41, 0X5F }, /* -1.0db */ + { 0X3C, 0X6B, 0X7E, 0X4F }, /* -0.5db */ + { 0X40, 0X00, 0X00, 0X00 }, /* 0.0db */ + { 0X43, 0XCA, 0XD0, 0X22 }, /* 0.5db */ + { 0X47, 0XCF, 0X26, 0X7D }, /* 1.0db */ + { 0X4C, 0X10, 0X6B, 0XA5 }, /* 1.5db */ + { 0X50, 0X92, 0X3B, 0XE3 }, /* 2.0db */ + { 0X55, 0X58, 0X6A, 0X46 }, /* 2.5db */ + { 0X5A, 0X67, 0X03, 0XDF }, /* 3.0db */ + { 0X5F, 0XC2, 0X53, 0X32 }, /* 3.5db */ + { 0X65, 0X6E, 0XE3, 0XDB }, /* 4.0db */ + { 0X6B, 0X71, 0X86, 0X68 }, /* 4.5db */ + { 0X71, 0XCF, 0X54, 0X71 }, /* 5.0db */ + { 0X78, 0X8D, 0XB4, 0XE9 }, /* 5.5db */ + { 0X7F, 0XFF, 0XFF, 0XFF }, /* 6.0db */ +}; +#endif diff --git a/include/sound/tas2781-tlv.h b/include/sound/tas2781-tlv.h index 99c41bfc7827..5b003843752b 100644 --- a/include/sound/tas2781-tlv.h +++ b/include/sound/tas2781-tlv.h @@ -17,265 +17,5 @@ static const __maybe_unused DECLARE_TLV_DB_SCALE(dvc_tlv, -10000, 100, 0); static const DECLARE_TLV_DB_SCALE(amp_vol_tlv, 1100, 50, 0); -static const DECLARE_TLV_DB_SCALE(tas2563_dvc_tlv, -12150, 50, 1); -/* pow(10, db/20) * pow(2,30) */ -static const unsigned char tas2563_dvc_table[][4] = { - { 0X00, 0X00, 0X00, 0X00 }, /* -121.5db */ - { 0X00, 0X00, 0X03, 0XBC }, /* -121.0db */ - { 0X00, 0X00, 0X03, 0XF5 }, /* -120.5db */ - { 0X00, 0X00, 0X04, 0X31 }, /* -120.0db */ - { 0X00, 0X00, 0X04, 0X71 }, /* -119.5db */ - { 0X00, 0X00, 0X04, 0XB4 }, /* -119.0db */ - { 0X00, 0X00, 0X04, 0XFC }, /* -118.5db */ - { 0X00, 0X00, 0X05, 0X47 }, /* -118.0db */ - { 0X00, 0X00, 0X05, 0X97 }, /* -117.5db */ - { 0X00, 0X00, 0X05, 0XEC }, /* -117.0db */ - { 0X00, 0X00, 0X06, 0X46 }, /* -116.5db */ - { 0X00, 0X00, 0X06, 0XA5 }, /* -116.0db */ - { 0X00, 0X00, 0X07, 0X0A }, /* -115.5db */ - { 0X00, 0X00, 0X07, 0X75 }, /* -115.0db */ - { 0X00, 0X00, 0X07, 0XE6 }, /* -114.5db */ - { 0X00, 0X00, 0X08, 0X5E }, /* -114.0db */ - { 0X00, 0X00, 0X08, 0XDD }, /* -113.5db */ - { 0X00, 0X00, 0X09, 0X63 }, /* -113.0db */ - { 0X00, 0X00, 0X09, 0XF2 }, /* -112.5db */ - { 0X00, 0X00, 0X0A, 0X89 }, /* -112.0db */ - { 0X00, 0X00, 0X0B, 0X28 }, /* -111.5db */ - { 0X00, 0X00, 0X0B, 0XD2 }, /* -111.0db */ - { 0X00, 0X00, 0X0C, 0X85 }, /* -110.5db */ - { 0X00, 0X00, 0X0D, 0X43 }, /* -110.0db */ - { 0X00, 0X00, 0X0E, 0X0C }, /* -109.5db */ - { 0X00, 0X00, 0X0E, 0XE1 }, /* -109.0db */ - { 0X00, 0X00, 0X0F, 0XC3 }, /* -108.5db */ - { 0X00, 0X00, 0X10, 0XB2 }, /* -108.0db */ - { 0X00, 0X00, 0X11, 0XAF }, /* -107.5db */ - { 0X00, 0X00, 0X12, 0XBC }, /* -107.0db */ - { 0X00, 0X00, 0X13, 0XD8 }, /* -106.5db */ - { 0X00, 0X00, 0X15, 0X05 }, /* -106.0db */ - { 0X00, 0X00, 0X16, 0X44 }, /* -105.5db */ - { 0X00, 0X00, 0X17, 0X96 }, /* -105.0db */ - { 0X00, 0X00, 0X18, 0XFB }, /* -104.5db */ - { 0X00, 0X00, 0X1A, 0X76 }, /* -104.0db */ - { 0X00, 0X00, 0X1C, 0X08 }, /* -103.5db */ - { 0X00, 0X00, 0X1D, 0XB1 }, /* -103.0db */ - { 0X00, 0X00, 0X1F, 0X73 }, /* -102.5db */ - { 0X00, 0X00, 0X21, 0X51 }, /* -102.0db */ - { 0X00, 0X00, 0X23, 0X4A }, /* -101.5db */ - { 0X00, 0X00, 0X25, 0X61 }, /* -101.0db */ - { 0X00, 0X00, 0X27, 0X98 }, /* -100.5db */ - { 0X00, 0X00, 0X29, 0XF1 }, /* -100.0db */ - { 0X00, 0X00, 0X2C, 0X6D }, /* -99.5db */ - { 0X00, 0X00, 0X2F, 0X0F }, /* -99.0db */ - { 0X00, 0X00, 0X31, 0XD9 }, /* -98.5db */ - { 0X00, 0X00, 0X34, 0XCD }, /* -98.0db */ - { 0X00, 0X00, 0X37, 0XEE }, /* -97.5db */ - { 0X00, 0X00, 0X3B, 0X3F }, /* -97.0db */ - { 0X00, 0X00, 0X3E, 0XC1 }, /* -96.5db */ - { 0X00, 0X00, 0X42, 0X79 }, /* -96.0db */ - { 0X00, 0X00, 0X46, 0X6A }, /* -95.5db */ - { 0X00, 0X00, 0X4A, 0X96 }, /* -95.0db */ - { 0X00, 0X00, 0X4F, 0X01 }, /* -94.5db */ - { 0X00, 0X00, 0X53, 0XAF }, /* -94.0db */ - { 0X00, 0X00, 0X58, 0XA5 }, /* -93.5db */ - { 0X00, 0X00, 0X5D, 0XE6 }, /* -93.0db */ - { 0X00, 0X00, 0X63, 0X76 }, /* -92.5db */ - { 0X00, 0X00, 0X69, 0X5B }, /* -92.0db */ - { 0X00, 0X00, 0X6F, 0X99 }, /* -91.5db */ - { 0X00, 0X00, 0X76, 0X36 }, /* -91.0db */ - { 0X00, 0X00, 0X7D, 0X37 }, /* -90.5db */ - { 0X00, 0X00, 0X84, 0XA2 }, /* -90.0db */ - { 0X00, 0X00, 0X8C, 0X7E }, /* -89.5db */ - { 0X00, 0X00, 0X94, 0XD1 }, /* -89.0db */ - { 0X00, 0X00, 0X9D, 0XA3 }, /* -88.5db */ - { 0X00, 0X00, 0XA6, 0XFA }, /* -88.0db */ - { 0X00, 0X00, 0XB0, 0XDF }, /* -87.5db */ - { 0X00, 0X00, 0XBB, 0X5A }, /* -87.0db */ - { 0X00, 0X00, 0XC6, 0X74 }, /* -86.5db */ - { 0X00, 0X00, 0XD2, 0X36 }, /* -86.0db */ - { 0X00, 0X00, 0XDE, 0XAB }, /* -85.5db */ - { 0X00, 0X00, 0XEB, 0XDC }, /* -85.0db */ - { 0X00, 0X00, 0XF9, 0XD6 }, /* -84.5db */ - { 0X00, 0X01, 0X08, 0XA4 }, /* -84.0db */ - { 0X00, 0X01, 0X18, 0X52 }, /* -83.5db */ - { 0X00, 0X01, 0X28, 0XEF }, /* -83.0db */ - { 0X00, 0X01, 0X3A, 0X87 }, /* -82.5db */ - { 0X00, 0X01, 0X4D, 0X2A }, /* -82.0db */ - { 0X00, 0X01, 0X60, 0XE8 }, /* -81.5db */ - { 0X00, 0X01, 0X75, 0XD1 }, /* -81.0db */ - { 0X00, 0X01, 0X8B, 0XF7 }, /* -80.5db */ - { 0X00, 0X01, 0XA3, 0X6E }, /* -80.0db */ - { 0X00, 0X01, 0XBC, 0X48 }, /* -79.5db */ - { 0X00, 0X01, 0XD6, 0X9B }, /* -79.0db */ - { 0X00, 0X01, 0XF2, 0X7E }, /* -78.5db */ - { 0X00, 0X02, 0X10, 0X08 }, /* -78.0db */ - { 0X00, 0X02, 0X2F, 0X51 }, /* -77.5db */ - { 0X00, 0X02, 0X50, 0X76 }, /* -77.0db */ - { 0X00, 0X02, 0X73, 0X91 }, /* -76.5db */ - { 0X00, 0X02, 0X98, 0XC0 }, /* -76.0db */ - { 0X00, 0X02, 0XC0, 0X24 }, /* -75.5db */ - { 0X00, 0X02, 0XE9, 0XDD }, /* -75.0db */ - { 0X00, 0X03, 0X16, 0X0F }, /* -74.5db */ - { 0X00, 0X03, 0X44, 0XDF }, /* -74.0db */ - { 0X00, 0X03, 0X76, 0X76 }, /* -73.5db */ - { 0X00, 0X03, 0XAA, 0XFC }, /* -73.0db */ - { 0X00, 0X03, 0XE2, 0XA0 }, /* -72.5db */ - { 0X00, 0X04, 0X1D, 0X8F }, /* -72.0db */ - { 0X00, 0X04, 0X5B, 0XFD }, /* -71.5db */ - { 0X00, 0X04, 0X9E, 0X1D }, /* -71.0db */ - { 0X00, 0X04, 0XE4, 0X29 }, /* -70.5db */ - { 0X00, 0X05, 0X2E, 0X5A }, /* -70.0db */ - { 0X00, 0X05, 0X7C, 0XF2 }, /* -69.5db */ - { 0X00, 0X05, 0XD0, 0X31 }, /* -69.0db */ - { 0X00, 0X06, 0X28, 0X60 }, /* -68.5db */ - { 0X00, 0X06, 0X85, 0XC8 }, /* -68.0db */ - { 0X00, 0X06, 0XE8, 0XB9 }, /* -67.5db */ - { 0X00, 0X07, 0X51, 0X86 }, /* -67.0db */ - { 0X00, 0X07, 0XC0, 0X8A }, /* -66.5db */ - { 0X00, 0X08, 0X36, 0X21 }, /* -66.0db */ - { 0X00, 0X08, 0XB2, 0XB0 }, /* -65.5db */ - { 0X00, 0X09, 0X36, 0XA1 }, /* -65.0db */ - { 0X00, 0X09, 0XC2, 0X63 }, /* -64.5db */ - { 0X00, 0X0A, 0X56, 0X6D }, /* -64.0db */ - { 0X00, 0X0A, 0XF3, 0X3C }, /* -63.5db */ - { 0X00, 0X0B, 0X99, 0X56 }, /* -63.0db */ - { 0X00, 0X0C, 0X49, 0X48 }, /* -62.5db */ - { 0X00, 0X0D, 0X03, 0XA7 }, /* -62.0db */ - { 0X00, 0X0D, 0XC9, 0X11 }, /* -61.5db */ - { 0X00, 0X0E, 0X9A, 0X2D }, /* -61.0db */ - { 0X00, 0X0F, 0X77, 0XAD }, /* -60.5db */ - { 0X00, 0X10, 0X62, 0X4D }, /* -60.0db */ - { 0X00, 0X11, 0X5A, 0XD5 }, /* -59.5db */ - { 0X00, 0X12, 0X62, 0X16 }, /* -59.0db */ - { 0X00, 0X13, 0X78, 0XF0 }, /* -58.5db */ - { 0X00, 0X14, 0XA0, 0X50 }, /* -58.0db */ - { 0X00, 0X15, 0XD9, 0X31 }, /* -57.5db */ - { 0X00, 0X17, 0X24, 0X9C }, /* -57.0db */ - { 0X00, 0X18, 0X83, 0XAA }, /* -56.5db */ - { 0X00, 0X19, 0XF7, 0X86 }, /* -56.0db */ - { 0X00, 0X1B, 0X81, 0X6A }, /* -55.5db */ - { 0X00, 0X1D, 0X22, 0XA4 }, /* -55.0db */ - { 0X00, 0X1E, 0XDC, 0X98 }, /* -54.5db */ - { 0X00, 0X20, 0XB0, 0XBC }, /* -54.0db */ - { 0X00, 0X22, 0XA0, 0X9D }, /* -53.5db */ - { 0X00, 0X24, 0XAD, 0XE0 }, /* -53.0db */ - { 0X00, 0X26, 0XDA, 0X43 }, /* -52.5db */ - { 0X00, 0X29, 0X27, 0X9D }, /* -52.0db */ - { 0X00, 0X2B, 0X97, 0XE3 }, /* -51.5db */ - { 0X00, 0X2E, 0X2D, 0X27 }, /* -51.0db */ - { 0X00, 0X30, 0XE9, 0X9A }, /* -50.5db */ - { 0X00, 0X33, 0XCF, 0X8D }, /* -50.0db */ - { 0X00, 0X36, 0XE1, 0X78 }, /* -49.5db */ - { 0X00, 0X3A, 0X21, 0XF3 }, /* -49.0db */ - { 0X00, 0X3D, 0X93, 0XC3 }, /* -48.5db */ - { 0X00, 0X41, 0X39, 0XD3 }, /* -48.0db */ - { 0X00, 0X45, 0X17, 0X3B }, /* -47.5db */ - { 0X00, 0X49, 0X2F, 0X44 }, /* -47.0db */ - { 0X00, 0X4D, 0X85, 0X66 }, /* -46.5db */ - { 0X00, 0X52, 0X1D, 0X50 }, /* -46.0db */ - { 0X00, 0X56, 0XFA, 0XE8 }, /* -45.5db */ - { 0X00, 0X5C, 0X22, 0X4E }, /* -45.0db */ - { 0X00, 0X61, 0X97, 0XE1 }, /* -44.5db */ - { 0X00, 0X67, 0X60, 0X44 }, /* -44.0db */ - { 0X00, 0X6D, 0X80, 0X60 }, /* -43.5db */ - { 0X00, 0X73, 0XFD, 0X65 }, /* -43.0db */ - { 0X00, 0X7A, 0XDC, 0XD7 }, /* -42.5db */ - { 0X00, 0X82, 0X24, 0X8A }, /* -42.0db */ - { 0X00, 0X89, 0XDA, 0XAB }, /* -41.5db */ - { 0X00, 0X92, 0X05, 0XC6 }, /* -41.0db */ - { 0X00, 0X9A, 0XAC, 0XC8 }, /* -40.5db */ - { 0X00, 0XA3, 0XD7, 0X0A }, /* -40.0db */ - { 0X00, 0XAD, 0X8C, 0X52 }, /* -39.5db */ - { 0X00, 0XB7, 0XD4, 0XDD }, /* -39.0db */ - { 0X00, 0XC2, 0XB9, 0X65 }, /* -38.5db */ - { 0X00, 0XCE, 0X43, 0X28 }, /* -38.0db */ - { 0X00, 0XDA, 0X7B, 0XF1 }, /* -37.5db */ - { 0X00, 0XE7, 0X6E, 0X1E }, /* -37.0db */ - { 0X00, 0XF5, 0X24, 0XAC }, /* -36.5db */ - { 0X01, 0X03, 0XAB, 0X3D }, /* -36.0db */ - { 0X01, 0X13, 0X0E, 0X24 }, /* -35.5db */ - { 0X01, 0X23, 0X5A, 0X71 }, /* -35.0db */ - { 0X01, 0X34, 0X9D, 0XF8 }, /* -34.5db */ - { 0X01, 0X46, 0XE7, 0X5D }, /* -34.0db */ - { 0X01, 0X5A, 0X46, 0X27 }, /* -33.5db */ - { 0X01, 0X6E, 0XCA, 0XC5 }, /* -33.0db */ - { 0X01, 0X84, 0X86, 0X9F }, /* -32.5db */ - { 0X01, 0X9B, 0X8C, 0X27 }, /* -32.0db */ - { 0X01, 0XB3, 0XEE, 0XE5 }, /* -31.5db */ - { 0X01, 0XCD, 0XC3, 0X8C }, /* -31.0db */ - { 0X01, 0XE9, 0X20, 0X05 }, /* -30.5db */ - { 0X02, 0X06, 0X1B, 0X89 }, /* -30.0db */ - { 0X02, 0X24, 0XCE, 0XB0 }, /* -29.5db */ - { 0X02, 0X45, 0X53, 0X85 }, /* -29.0db */ - { 0X02, 0X67, 0XC5, 0XA2 }, /* -28.5db */ - { 0X02, 0X8C, 0X42, 0X3F }, /* -28.0db */ - { 0X02, 0XB2, 0XE8, 0X55 }, /* -27.5db */ - { 0X02, 0XDB, 0XD8, 0XAD }, /* -27.0db */ - { 0X03, 0X07, 0X36, 0X05 }, /* -26.5db */ - { 0X03, 0X35, 0X25, 0X29 }, /* -26.0db */ - { 0X03, 0X65, 0XCD, 0X13 }, /* -25.5db */ - { 0X03, 0X99, 0X57, 0X0C }, /* -25.0db */ - { 0X03, 0XCF, 0XEE, 0XCF }, /* -24.5db */ - { 0X04, 0X09, 0XC2, 0XB0 }, /* -24.0db */ - { 0X04, 0X47, 0X03, 0XC1 }, /* -23.5db */ - { 0X04, 0X87, 0XE5, 0XFB }, /* -23.0db */ - { 0X04, 0XCC, 0XA0, 0X6D }, /* -22.5db */ - { 0X05, 0X15, 0X6D, 0X68 }, /* -22.0db */ - { 0X05, 0X62, 0X8A, 0XB3 }, /* -21.5db */ - { 0X05, 0XB4, 0X39, 0XBC }, /* -21.0db */ - { 0X06, 0X0A, 0XBF, 0XD4 }, /* -20.5db */ - { 0X06, 0X66, 0X66, 0X66 }, /* -20.0db */ - { 0X06, 0XC7, 0X7B, 0X36 }, /* -19.5db */ - { 0X07, 0X2E, 0X50, 0XA6 }, /* -19.0db */ - { 0X07, 0X9B, 0X3D, 0XF6 }, /* -18.5db */ - { 0X08, 0X0E, 0X9F, 0X96 }, /* -18.0db */ - { 0X08, 0X88, 0XD7, 0X6D }, /* -17.5db */ - { 0X09, 0X0A, 0X4D, 0X2F }, /* -17.0db */ - { 0X09, 0X93, 0X6E, 0XB8 }, /* -16.5db */ - { 0X0A, 0X24, 0XB0, 0X62 }, /* -16.0db */ - { 0X0A, 0XBE, 0X8D, 0X70 }, /* -15.5db */ - { 0X0B, 0X61, 0X88, 0X71 }, /* -15.0db */ - { 0X0C, 0X0E, 0X2B, 0XB0 }, /* -14.5db */ - { 0X0C, 0XC5, 0X09, 0XAB }, /* -14.0db */ - { 0X0D, 0X86, 0XBD, 0X8D }, /* -13.5db */ - { 0X0E, 0X53, 0XEB, 0XB3 }, /* -13.0db */ - { 0X0F, 0X2D, 0X42, 0X38 }, /* -12.5db */ - { 0X10, 0X13, 0X79, 0X87 }, /* -12.0db */ - { 0X11, 0X07, 0X54, 0XF9 }, /* -11.5db */ - { 0X12, 0X09, 0XA3, 0X7A }, /* -11.0db */ - { 0X13, 0X1B, 0X40, 0X39 }, /* -10.5db */ - { 0X14, 0X3D, 0X13, 0X62 }, /* -10.0db */ - { 0X15, 0X70, 0X12, 0XE1 }, /* -9.5db */ - { 0X16, 0XB5, 0X43, 0X37 }, /* -9.0db */ - { 0X18, 0X0D, 0XB8, 0X54 }, /* -8.5db */ - { 0X19, 0X7A, 0X96, 0X7F }, /* -8.0db */ - { 0X1A, 0XFD, 0X13, 0X54 }, /* -7.5db */ - { 0X1C, 0X96, 0X76, 0XC6 }, /* -7.0db */ - { 0X1E, 0X48, 0X1C, 0X37 }, /* -6.5db */ - { 0X20, 0X13, 0X73, 0X9E }, /* -6.0db */ - { 0X21, 0XFA, 0X02, 0XBF }, /* -5.5db */ - { 0X23, 0XFD, 0X66, 0X78 }, /* -5.0db */ - { 0X26, 0X1F, 0X54, 0X1C }, /* -4.5db */ - { 0X28, 0X61, 0X9A, 0XE9 }, /* -4.0db */ - { 0X2A, 0XC6, 0X25, 0X91 }, /* -3.5db */ - { 0X2D, 0X4E, 0XFB, 0XD5 }, /* -3.0db */ - { 0X2F, 0XFE, 0X44, 0X48 }, /* -2.5db */ - { 0X32, 0XD6, 0X46, 0X17 }, /* -2.0db */ - { 0X35, 0XD9, 0X6B, 0X02 }, /* -1.5db */ - { 0X39, 0X0A, 0X41, 0X5F }, /* -1.0db */ - { 0X3C, 0X6B, 0X7E, 0X4F }, /* -0.5db */ - { 0X40, 0X00, 0X00, 0X00 }, /* 0.0db */ - { 0X43, 0XCA, 0XD0, 0X22 }, /* 0.5db */ - { 0X47, 0XCF, 0X26, 0X7D }, /* 1.0db */ - { 0X4C, 0X10, 0X6B, 0XA5 }, /* 1.5db */ - { 0X50, 0X92, 0X3B, 0XE3 }, /* 2.0db */ - { 0X55, 0X58, 0X6A, 0X46 }, /* 2.5db */ - { 0X5A, 0X67, 0X03, 0XDF }, /* 3.0db */ - { 0X5F, 0XC2, 0X53, 0X32 }, /* 3.5db */ - { 0X65, 0X6E, 0XE3, 0XDB }, /* 4.0db */ - { 0X6B, 0X71, 0X86, 0X68 }, /* 4.5db */ - { 0X71, 0XCF, 0X54, 0X71 }, /* 5.0db */ - { 0X78, 0X8D, 0XB4, 0XE9 }, /* 5.5db */ - { 0XFF, 0XFF, 0XFF, 0XFF }, /* 6.0db */ -}; #endif diff --git a/include/sound/tas2781.h b/include/sound/tas2781.h index 18161d02a96f..81fb34c9da89 100644 --- a/include/sound/tas2781.h +++ b/include/sound/tas2781.h @@ -23,6 +23,7 @@ #define SMARTAMP_MODULE_NAME "tas2781" #define TAS2781_GLOBAL_ADDR 0x40 #define TAS2563_GLOBAL_ADDR 0x48 + #define TASDEVICE_RATES (SNDRV_PCM_RATE_44100 |\ SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000 |\ SNDRV_PCM_RATE_88200) @@ -49,12 +50,69 @@ /*I2C Checksum */ #define TASDEVICE_I2CChecksum TASDEVICE_REG(0x0, 0x0, 0x7E) +/* XM_340 */ +#define TASDEVICE_XM_A1_REG TASDEVICE_REG(0x64, 0x02, 0x4c) +/* XM_341 */ +#define TASDEVICE_XM_A2_REG TASDEVICE_REG(0x64, 0x02, 0x64) + /* Volume control */ #define TAS2563_DVC_LVL TASDEVICE_REG(0x00, 0x02, 0x0C) #define TAS2781_DVC_LVL TASDEVICE_REG(0x0, 0x0, 0x1A) #define TAS2781_AMP_LEVEL TASDEVICE_REG(0x0, 0x0, 0x03) #define TAS2781_AMP_LEVEL_MASK GENMASK(5, 1) +#define TAS2563_IDLE TASDEVICE_REG(0x00, 0x00, 0x3e) +#define TAS2563_PRM_R0_REG TASDEVICE_REG(0x00, 0x0f, 0x34) +#define TAS2563_PRM_R0_LOW_REG TASDEVICE_REG(0x00, 0x0f, 0x48) +#define TAS2563_PRM_INVR0_REG TASDEVICE_REG(0x00, 0x0f, 0x40) +#define TAS2563_PRM_POW_REG TASDEVICE_REG(0x00, 0x0d, 0x3c) +#define TAS2563_PRM_TLIMIT_REG TASDEVICE_REG(0x00, 0x10, 0x14) + +#define TAS2563_RUNTIME_RE_REG_TF TASDEVICE_REG(0x64, 0x02, 0x70) +#define TAS2563_RUNTIME_RE_REG TASDEVICE_REG(0x64, 0x02, 0x48) + +#define TAS2563_PRM_ENFF_REG TASDEVICE_REG(0x00, 0x0d, 0x54) +#define TAS2563_PRM_DISTCK_REG TASDEVICE_REG(0x00, 0x0d, 0x58) +#define TAS2563_PRM_TE_SCTHR_REG TASDEVICE_REG(0x00, 0x0f, 0x60) +#define TAS2563_PRM_PLT_FLAG_REG TASDEVICE_REG(0x00, 0x0d, 0x74) +#define TAS2563_PRM_SINEGAIN_REG TASDEVICE_REG(0x00, 0x0d, 0x7c) +/* prm_Int_B0 */ +#define TAS2563_TE_TA1_REG TASDEVICE_REG(0x00, 0x10, 0x0c) +/* prm_Int_A1 */ +#define TAS2563_TE_TA1_AT_REG TASDEVICE_REG(0x00, 0x10, 0x10) +/* prm_TE_Beta */ +#define TAS2563_TE_TA2_REG TASDEVICE_REG(0x00, 0x0f, 0x64) +/* prm_TE_Beta1 */ +#define TAS2563_TE_AT_REG TASDEVICE_REG(0x00, 0x0f, 0x68) +/* prm_TE_1_Beta1 */ +#define TAS2563_TE_DT_REG TASDEVICE_REG(0x00, 0x0f, 0x70) + +#define TAS2781_PRM_R0_REG TASDEVICE_REG(0x00, 0x17, 0x74) +#define TAS2781_PRM_R0_LOW_REG TASDEVICE_REG(0x00, 0x18, 0x0c) +#define TAS2781_PRM_INVR0_REG TASDEVICE_REG(0x00, 0x18, 0x14) +#define TAS2781_PRM_POW_REG TASDEVICE_REG(0x00, 0x13, 0x70) +#define TAS2781_PRM_TLIMIT_REG TASDEVICE_REG(0x00, 0x18, 0x7c) + +#define TAS2781_PRM_INT_MASK_REG TASDEVICE_REG(0x00, 0x00, 0x3b) +#define TAS2781_PRM_CLK_CFG_REG TASDEVICE_REG(0x00, 0x00, 0x5c) +#define TAS2781_PRM_RSVD_REG TASDEVICE_REG(0x00, 0x01, 0x19) +#define TAS2781_PRM_TEST_57_REG TASDEVICE_REG(0x00, 0xfd, 0x39) +#define TAS2781_PRM_TEST_62_REG TASDEVICE_REG(0x00, 0xfd, 0x3e) +#define TAS2781_PRM_PVDD_UVLO_REG TASDEVICE_REG(0x00, 0x00, 0x71) +#define TAS2781_PRM_CHNL_0_REG TASDEVICE_REG(0x00, 0x00, 0x03) +#define TAS2781_PRM_NG_CFG0_REG TASDEVICE_REG(0x00, 0x00, 0x35) +#define TAS2781_PRM_IDLE_CH_DET_REG TASDEVICE_REG(0x00, 0x00, 0x66) +#define TAS2781_PRM_PLT_FLAG_REG TASDEVICE_REG(0x00, 0x14, 0x38) +#define TAS2781_PRM_SINEGAIN_REG TASDEVICE_REG(0x00, 0x14, 0x40) +#define TAS2781_PRM_SINEGAIN2_REG TASDEVICE_REG(0x00, 0x14, 0x44) + +#define TAS2781_TEST_UNLOCK_REG TASDEVICE_REG(0x00, 0xFD, 0x0D) +#define TAS2781_TEST_PAGE_UNLOCK 0x0D + +#define TAS2781_RUNTIME_LATCH_RE_REG TASDEVICE_REG(0x00, 0x00, 0x49) +#define TAS2781_RUNTIME_RE_REG_TF TASDEVICE_REG(0x64, 0x62, 0x48) +#define TAS2781_RUNTIME_RE_REG TASDEVICE_REG(0x64, 0x63, 0x44) + #define TASDEVICE_CMD_SING_W 0x1 #define TASDEVICE_CMD_BURST 0x2 #define TASDEVICE_CMD_DELAY 0x3 @@ -70,7 +128,15 @@ enum device_catlog_id { OTHERS }; +struct bulk_reg_val { + int reg; + unsigned char val[4]; + unsigned char val_len; + bool is_locked; +}; + struct tasdevice { + struct bulk_reg_val *cali_data_restore; struct tasdevice_fw *cali_data_fmw; unsigned int dev_addr; unsigned int err_code; @@ -89,6 +155,9 @@ struct tasdevice_irqinfo { struct calidata { unsigned char *data; unsigned long total_sz; + unsigned int *reg_array; + unsigned int reg_array_sz; + unsigned int cali_dat_sz; }; struct tasdevice_priv { @@ -124,6 +193,7 @@ struct tasdevice_priv { bool force_fwload_status; bool playback_started; bool isacpi; + bool is_user_space_calidata; unsigned int global_addr; int (*fw_parse_variable_header)(struct tasdevice_priv *tas_priv, @@ -150,6 +220,8 @@ int tasdevice_init(struct tasdevice_priv *tas_priv); void tasdevice_remove(struct tasdevice_priv *tas_priv); int tasdevice_save_calibration(struct tasdevice_priv *tas_priv); void tasdevice_apply_calibration(struct tasdevice_priv *tas_priv); +int tasdev_chn_switch(struct tasdevice_priv *tas_priv, + unsigned short chn); int tasdevice_dev_read(struct tasdevice_priv *tas_priv, unsigned short chn, unsigned int reg, unsigned int *value); int tasdevice_dev_write(struct tasdevice_priv *tas_priv, diff --git a/sound/soc/codecs/tas2781-comlib.c b/sound/soc/codecs/tas2781-comlib.c index 1fbf4560f5cc..e7599f9fc125 100644 --- a/sound/soc/codecs/tas2781-comlib.c +++ b/sound/soc/codecs/tas2781-comlib.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 // -// TAS2781 Common functions for HDA and ASoC Audio drivers +// TAS2563/TAS2781 Common functions for HDA and ASoC Audio drivers // // Copyright 2023 - 2024 Texas Instruments, Inc. // @@ -64,8 +64,8 @@ static int tasdevice_change_chn_book(struct tasdevice_priv *tas_priv, */ ret = regmap_write(map, TASDEVICE_PAGE_SELECT, 0); if (ret < 0) { - dev_err(tas_priv->dev, "%s, E=%d\n", - __func__, ret); + dev_err(tas_priv->dev, "%s, E=%d channel:%d\n", + __func__, ret, chn); goto out; } } @@ -89,6 +89,32 @@ static int tasdevice_change_chn_book(struct tasdevice_priv *tas_priv, return ret; } +int tasdev_chn_switch(struct tasdevice_priv *tas_priv, + unsigned short chn) +{ + struct i2c_client *client = (struct i2c_client *)tas_priv->client; + struct tasdevice *tasdev = &tas_priv->tasdevice[chn]; + struct regmap *map = tas_priv->regmap; + int ret; + + if (client->addr != tasdev->dev_addr) { + client->addr = tasdev->dev_addr; + /* All devices share the same regmap, clear the page + * inside regmap once switching to another device. + * Register 0 at any pages and any books inside tas2781 + * is the same one for page-switching. + */ + ret = regmap_write(map, TASDEVICE_PAGE_SELECT, 0); + if (ret < 0) { + dev_err(tas_priv->dev, "%s, E=%d\n", __func__, ret); + return ret; + } + return 1; + } + return 0; +} +EXPORT_SYMBOL_GPL(tasdev_chn_switch); + int tasdevice_dev_read(struct tasdevice_priv *tas_priv, unsigned short chn, unsigned int reg, unsigned int *val) { diff --git a/sound/soc/codecs/tas2781-fmwlib.c b/sound/soc/codecs/tas2781-fmwlib.c index 63626b982d04..2b5eb67a52e8 100644 --- a/sound/soc/codecs/tas2781-fmwlib.c +++ b/sound/soc/codecs/tas2781-fmwlib.c @@ -2152,20 +2152,38 @@ static int tasdevice_load_data(struct tasdevice_priv *tas_priv, static void tasdev_load_calibrated_data(struct tasdevice_priv *priv, int i) { + struct tasdevice_fw *cal_fmw = priv->tasdevice[i].cali_data_fmw; + struct calidata *cali_data = &priv->cali_data; + unsigned char *data = &cali_data->data[1]; struct tasdevice_calibration *cal; - struct tasdevice_fw *cal_fmw; + int k = i * (cali_data->cali_dat_sz + 1); + int j, rc; - cal_fmw = priv->tasdevice[i].cali_data_fmw; + /* Load the calibrated data from cal bin file */ + if (!priv->is_user_space_calidata && cal_fmw) { + cal = cal_fmw->calibrations; - /* No calibrated data for current devices, playback will go ahead. */ - if (!cal_fmw) + if (cal) + load_calib_data(priv, &cal->dev_data); return; - - cal = cal_fmw->calibrations; - if (cal) + } + if (!priv->is_user_space_calidata) return; - - load_calib_data(priv, &cal->dev_data); + /* load calibrated data from user space */ + if (data[k] != i) { + dev_err(priv->dev, "%s: no cal-data for dev %d from usr-spc\n", + __func__, i); + return; + } + k++; + for (j = 0; j < cali_data->reg_array_sz; j++) { + rc = tasdevice_dev_bulk_write(priv, i, cali_data->reg_array[j], + &(data[k + 4 * j]), 4); + if (rc < 0) + dev_err(priv->dev, + "chn %d calib %d bulk_wr err = %d\n", + i, j, rc); + } } int tasdevice_select_tuningprm_cfg(void *context, int prm_no, @@ -2260,9 +2278,10 @@ int tasdevice_select_tuningprm_cfg(void *context, int prm_no, tas_priv->tasdevice[i].cur_conf = cfg_no; } } - } else + } else { dev_dbg(tas_priv->dev, "%s: Unneeded loading dsp conf %d\n", __func__, cfg_no); + } status |= cfg_info[rca_conf_no]->active_dev; diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c index e79d613745b4..e36934c8eeb2 100644 --- a/sound/soc/codecs/tas2781-i2c.c +++ b/sound/soc/codecs/tas2781-i2c.c @@ -30,9 +30,141 @@ #include <sound/soc.h> #include <sound/tas2781.h> #include <sound/tlv.h> +#include <sound/tas2563-tlv.h> #include <sound/tas2781-tlv.h> #include <asm/unaligned.h> +static const struct bulk_reg_val tas2563_cali_start_reg[] = { + { + .reg = TAS2563_IDLE, + .val_len = 1, + .val = { 0x00 }, + }, + { + .reg = TAS2563_PRM_ENFF_REG, + .val_len = 4, + .val = { 0x40, 0x00, 0x00, 0x00 }, + }, + { + .reg = TAS2563_PRM_DISTCK_REG, + .val_len = 4, + .val = { 0x40, 0x00, 0x00, 0x00 }, + }, + { + .reg = TAS2563_PRM_TE_SCTHR_REG, + .val_len = 4, + .val = { 0x7f, 0xff, 0xff, 0xff }, + }, + { + .reg = TAS2563_PRM_PLT_FLAG_REG, + .val_len = 4, + .val = { 0x40, 0x00, 0x00, 0x00 }, + }, + { + .reg = TAS2563_PRM_SINEGAIN_REG, + .val_len = 4, + .val = { 0x0a, 0x3d, 0x70, 0xa4 }, + }, + { + .reg = TAS2563_TE_TA1_REG, + .val_len = 4, + .val = { 0x00, 0x36, 0x91, 0x5e }, + }, + { + .reg = TAS2563_TE_TA1_AT_REG, + .val_len = 4, + .val = { 0x00, 0x36, 0x91, 0x5e }, + }, + { + .reg = TAS2563_TE_TA2_REG, + .val_len = 4, + .val = { 0x00, 0x06, 0xd3, 0x72 }, + }, + { + .reg = TAS2563_TE_AT_REG, + .val_len = 4, + .val = { 0x00, 0x36, 0x91, 0x5e }, + }, + { + .reg = TAS2563_TE_DT_REG, + .val_len = 4, + .val = { 0x00, 0x36, 0x91, 0x5e }, + }, +}; + +static const struct bulk_reg_val tas2781_cali_start_reg[] = { + { + .reg = TAS2781_PRM_INT_MASK_REG, + .val = { 0xfe }, + .val_len = 1, + .is_locked = false + }, + { + .reg = TAS2781_PRM_CLK_CFG_REG, + .val = { 0xdd }, + .val_len = 1, + .is_locked = false + }, + { + .reg = TAS2781_PRM_RSVD_REG, + .val = { 0x20 }, + .val_len = 1, + .is_locked = false + }, + { + .reg = TAS2781_PRM_TEST_57_REG, + .val = { 0x14 }, + .val_len = 1, + .is_locked = true + }, + { + .reg = TAS2781_PRM_TEST_62_REG, + .val = { 0x45 }, + .val_len = 1, + .is_locked = true + }, + { + .reg = TAS2781_PRM_PVDD_UVLO_REG, + .val = { 0x03 }, + .val_len = 1, + .is_locked = false + }, + { + .reg = TAS2781_PRM_CHNL_0_REG, + .val = { 0xA8 }, + .val_len = 1, + .is_locked = false + }, + { + .reg = TAS2781_PRM_NG_CFG0_REG, + .val = { 0xb9 }, + .val_len = 1, + .is_locked = false + }, + { + .reg = TAS2781_PRM_IDLE_CH_DET_REG, + .val = { 0x92 }, + .val_len = 1, + .is_locked = false + }, + { + .reg = TAS2781_PRM_PLT_FLAG_REG, + .val = { 0x40, 0x00, 0x00, 0x00 }, + .val_len = 4, + .is_locked = false + }, + { + .reg = TAS2781_PRM_SINEGAIN_REG, + .val_len = 4, + .is_locked = false + }, + { + .reg = TAS2781_PRM_SINEGAIN2_REG, + .val_len = 4, + .is_locked = false + }, +}; + static const struct i2c_device_id tasdevice_id[] = { { "tas2563", TAS2563 }, { "tas2781", TAS2781 }, @@ -49,6 +181,22 @@ static const struct of_device_id tasdevice_of_match[] = { MODULE_DEVICE_TABLE(of, tasdevice_of_match); #endif +static const int tas2563_cali_data_reg[] = { + TAS2563_PRM_R0_REG, + TAS2563_PRM_R0_LOW_REG, + TAS2563_PRM_INVR0_REG, + TAS2563_PRM_POW_REG, + TAS2563_PRM_TLIMIT_REG, +}; + +static const int tas2781_cali_data_reg[] = { + TAS2781_PRM_R0_REG, + TAS2781_PRM_R0_LOW_REG, + TAS2781_PRM_INVR0_REG, + TAS2781_PRM_POW_REG, + TAS2781_PRM_TLIMIT_REG, +}; + /** * tas2781_digital_getvol - get the volum control * @kcontrol: control pointer @@ -67,8 +215,13 @@ static int tas2781_digital_getvol(struct snd_kcontrol *kcontrol, struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(codec); struct soc_mixer_control *mc = (struct soc_mixer_control *)kcontrol->private_value; + int rc; + + mutex_lock(&tas_priv->codec_lock); + rc = tasdevice_digital_getvol(tas_priv, ucontrol, mc); + mutex_unlock(&tas_priv->codec_lock); - return tasdevice_digital_getvol(tas_priv, ucontrol, mc); + return rc; } static int tas2781_digital_putvol(struct snd_kcontrol *kcontrol, @@ -78,8 +231,13 @@ static int tas2781_digital_putvol(struct snd_kcontrol *kcontrol, struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(codec); struct soc_mixer_control *mc = (struct soc_mixer_control *)kcontrol->private_value; + int rc; + + mutex_lock(&tas_priv->codec_lock); + rc = tasdevice_digital_putvol(tas_priv, ucontrol, mc); + mutex_unlock(&tas_priv->codec_lock); - return tasdevice_digital_putvol(tas_priv, ucontrol, mc); + return rc; } static int tas2781_amp_getvol(struct snd_kcontrol *kcontrol, @@ -89,8 +247,13 @@ static int tas2781_amp_getvol(struct snd_kcontrol *kcontrol, struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(codec); struct soc_mixer_control *mc = (struct soc_mixer_control *)kcontrol->private_value; + int rc; - return tasdevice_amp_getvol(tas_priv, ucontrol, mc); + mutex_lock(&tas_priv->codec_lock); + rc = tasdevice_amp_getvol(tas_priv, ucontrol, mc); + mutex_unlock(&tas_priv->codec_lock); + + return rc; } static int tas2781_amp_putvol(struct snd_kcontrol *kcontrol, @@ -101,8 +264,13 @@ static int tas2781_amp_putvol(struct snd_kcontrol *kcontrol, snd_soc_component_get_drvdata(codec); struct soc_mixer_control *mc = (struct soc_mixer_control *)kcontrol->private_value; + int rc; - return tasdevice_amp_putvol(tas_priv, ucontrol, mc); + mutex_lock(&tas_priv->codec_lock); + rc = tasdevice_amp_putvol(tas_priv, ucontrol, mc); + mutex_unlock(&tas_priv->codec_lock); + + return rc; } static int tasdev_force_fwload_get(struct snd_kcontrol *kcontrol, @@ -141,6 +309,414 @@ static int tasdev_force_fwload_put(struct snd_kcontrol *kcontrol, return change; } +static int tasdev_cali_data_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(comp); + struct soc_bytes_ext *bytes_ext = + (struct soc_bytes_ext *) kcontrol->private_value; + unsigned char *dst = ucontrol->value.bytes.data; + unsigned char *data = tas_priv->cali_data.data; + + mutex_lock(&tas_priv->codec_lock); + if (!tas_priv->is_user_space_calidata || + tas_priv->cali_data.total_sz != bytes_ext->max) + goto out; + + memcpy(dst, data, bytes_ext->max); +out: + mutex_unlock(&tas_priv->codec_lock); + return 0; +} + +static int calib_data_get(struct tasdevice_priv *tas_priv, int reg, + unsigned char *dst, int data_len) +{ + struct i2c_client *clt = (struct i2c_client *)tas_priv->client; + struct tasdevice *tasdev = tas_priv->tasdevice; + int rc = -1; + int i; + + if (data_len != 4) + return rc; + + for (i = 0; i < tas_priv->ndev; i++) { + if (clt->addr == tasdev[i].dev_addr) { + /* First byte is the device index. */ + dst[0] = i; + rc = tasdevice_dev_bulk_read(tas_priv, i, reg, &dst[1], + 4); + break; + } + } + + return rc; +} + +static void sngl_calib_start(struct tasdevice_priv *tas_priv, int i, + unsigned char *dat) +{ + struct tasdevice *tasdev = tas_priv->tasdevice; + struct bulk_reg_val *p = tasdev[i].cali_data_restore; + const int sum = ARRAY_SIZE(tas2781_cali_start_reg); + int j; + + if (p == NULL) + return; + + /* Store the current setting from the chip */ + for (j = 0; j < sum; j++) { + if (p[j].val_len == 1) { + if (p[j].is_locked) + tasdevice_dev_write(tas_priv, i, + TAS2781_TEST_UNLOCK_REG, + TAS2781_TEST_PAGE_UNLOCK); + tasdevice_dev_read(tas_priv, i, p[j].reg, + (int *)&p[j].val[0]); + } else { + tasdevice_dev_bulk_read(tas_priv, i, p[j].reg, + p[j].val, 4); + } + } + + /* Update the setting for calibration */ + for (j = 0; j < sum - 2; j++) { + if (p[j].val_len == 1) { + if (p[j].is_locked) + tasdevice_dev_write(tas_priv, i, + TAS2781_TEST_UNLOCK_REG, + TAS2781_TEST_PAGE_UNLOCK); + tasdevice_dev_write(tas_priv, i, p[j].reg, + tas2781_cali_start_reg[j].val[0]); + } else { + tasdevice_dev_bulk_write(tas_priv, i, p[j].reg, + (unsigned char *) + tas2781_cali_start_reg[j].val, 4); + } + } + + tasdevice_dev_bulk_write(tas_priv, i, p[j].reg, &dat[1], 4); + tasdevice_dev_bulk_write(tas_priv, i, p[j + 1].reg, &dat[5], 4); +} + +static int tas2781_calib_start_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(comp); + struct soc_bytes_ext *bytes_ext = + (struct soc_bytes_ext *) kcontrol->private_value; + unsigned char *dat = ucontrol->value.bytes.data; + int rc = 1; + int i; + + mutex_lock(&tas_priv->codec_lock); + if (tas_priv->chip_id != TAS2781 && + bytes_ext->max != 9 * tas_priv->ndev) { + rc = 0; + goto out; + } + + for (i = 0; i < tas_priv->ndev; i++) { + int k = i * 9; + + if (dat[k] != i) { + dev_err(tas_priv->dev, + "%s:no cal-setting for dev %d\n", __func__, i); + continue; + } + sngl_calib_start(tas_priv, i, dat + k); + } +out: + mutex_unlock(&tas_priv->codec_lock); + return rc; +} + +static void tas2781_calib_stop_put(struct tasdevice_priv *tas_priv) +{ + const int sum = ARRAY_SIZE(tas2781_cali_start_reg); + int i, j; + + for (i = 0; i < tas_priv->ndev; i++) { + struct tasdevice *tasdev = tas_priv->tasdevice; + struct bulk_reg_val *p = tasdev[i].cali_data_restore; + + if (p == NULL) + continue; + + for (j = 0; j < sum; j++) { + if (p[j].val_len == 1) { + if (p[j].is_locked) + tasdevice_dev_write(tas_priv, i, + TAS2781_TEST_UNLOCK_REG, + TAS2781_TEST_PAGE_UNLOCK); + tasdevice_dev_write(tas_priv, i, p[j].reg, + p[j].val[0]); + } else + tasdevice_dev_bulk_write(tas_priv, i, p[j].reg, + p[j].val, 4); + } + } +} + +static int tas2563_calib_start_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct bulk_reg_val *q = (struct bulk_reg_val *)tas2563_cali_start_reg; + struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(comp); + const int sum = ARRAY_SIZE(tas2563_cali_start_reg); + int rc = 1; + int i, j; + + mutex_lock(&tas_priv->codec_lock); + if (tas_priv->chip_id != TAS2563) { + rc = -1; + goto out; + } + + for (i = 0; i < tas_priv->ndev; i++) { + struct tasdevice *tasdev = tas_priv->tasdevice; + struct bulk_reg_val *p = tasdev[i].cali_data_restore; + + if (p == NULL) + continue; + for (j = 0; j < sum; j++) { + if (p[j].val_len == 1) + tasdevice_dev_read(tas_priv, + i, p[j].reg, + (unsigned int *)&p[j].val[0]); + else + tasdevice_dev_bulk_read(tas_priv, + i, p[j].reg, p[j].val, 4); + } + + for (j = 0; j < sum; j++) { + if (p[j].val_len == 1) + tasdevice_dev_write(tas_priv, i, p[j].reg, + q[j].val[0]); + else + tasdevice_dev_bulk_write(tas_priv, i, p[j].reg, + q[j].val, 4); + } + } +out: + mutex_unlock(&tas_priv->codec_lock); + return rc; +} + +static void tas2563_calib_stop_put(struct tasdevice_priv *tas_priv) +{ + const int sum = ARRAY_SIZE(tas2563_cali_start_reg); + int i, j; + + for (i = 0; i < tas_priv->ndev; i++) { + struct tasdevice *tasdev = tas_priv->tasdevice; + struct bulk_reg_val *p = tasdev[i].cali_data_restore; + + if (p == NULL) + continue; + + for (j = 0; j < sum; j++) { + if (p[j].val_len == 1) + tasdevice_dev_write(tas_priv, i, p[j].reg, + p[j].val[0]); + else + tasdevice_dev_bulk_write(tas_priv, i, p[j].reg, + p[j].val, 4); + } + } +} + +static int tasdev_calib_stop_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(comp); + struct calidata *cali_data = &tas_priv->cali_data; + unsigned char *data = cali_data->data; + int index = 0, i, j; + + mutex_lock(&tas_priv->codec_lock); + if (tas_priv->chip_id == TAS2563) + tas2563_calib_stop_put(tas_priv); + else + tas2781_calib_stop_put(tas_priv); + + for (i = 0; i < tas_priv->ndev; i++) { + data[index] = i; + index++; + for (j = 0; j < cali_data->reg_array_sz; j++) { + tasdevice_dev_bulk_read(tas_priv, i, + cali_data->reg_array[j], &data[index], 4); + index += 4; + } + } + mutex_unlock(&tas_priv->codec_lock); + + return 1; +} + +static int tasdev_cali_data_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(comp); + struct soc_bytes_ext *bytes_ext = + (struct soc_bytes_ext *) kcontrol->private_value; + unsigned char *data = tas_priv->cali_data.data; + int rc = 1; + + mutex_lock(&tas_priv->codec_lock); + if (tas_priv->cali_data.total_sz != bytes_ext->max) { + rc = 0; + goto out; + } + tas_priv->is_user_space_calidata = true; + data[0] = bytes_ext->max; + memcpy(&data[1], ucontrol->value.bytes.data, bytes_ext->max - 1); +out: + mutex_unlock(&tas_priv->codec_lock); + return rc; +} + +static int tas2781_latch_reg_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(comp); + struct i2c_client *clt = (struct i2c_client *)tas_priv->client; + struct tasdevice *tasdev = tas_priv->tasdevice; + unsigned char *dst = ucontrol->value.bytes.data; + int i, val, rc = -1; + + mutex_lock(&tas_priv->codec_lock); + for (i = 0; i < tas_priv->ndev; i++) { + if (clt->addr == tasdev[i].dev_addr) { + /* First byte is the device index. */ + dst[0] = i; + tasdevice_dev_read(tas_priv, i, + TAS2781_RUNTIME_LATCH_RE_REG, &val); + dst[1] = val; + rc = 0; + break; + } + } + mutex_unlock(&tas_priv->codec_lock); + return rc; +} + +static int tasdev_tf_data_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(comp); + struct soc_bytes_ext *bytes_ext = + (struct soc_bytes_ext *) kcontrol->private_value; + unsigned char *dst = ucontrol->value.bytes.data; + unsigned int reg; + int rc = -1; + + if (tas_priv->chip_id == TAS2781) + reg = TAS2781_RUNTIME_RE_REG_TF; + else + reg = TAS2563_RUNTIME_RE_REG_TF; + + mutex_lock(&tas_priv->codec_lock); + rc = calib_data_get(tas_priv, reg, dst, bytes_ext->max - 1); + mutex_unlock(&tas_priv->codec_lock); + + return rc; +} + +static int tasdev_re_data_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(comp); + struct soc_bytes_ext *bytes_ext = + (struct soc_bytes_ext *) kcontrol->private_value; + unsigned char *dst = ucontrol->value.bytes.data; + unsigned int reg; + int rc = -1; + + if (tas_priv->chip_id == TAS2781) + reg = TAS2781_RUNTIME_RE_REG; + else + reg = TAS2563_RUNTIME_RE_REG; + mutex_lock(&tas_priv->codec_lock); + rc = calib_data_get(tas_priv, reg, dst, bytes_ext->max - 1); + mutex_unlock(&tas_priv->codec_lock); + + return rc; +} + +static int tasdev_r0_data_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(comp); + struct soc_bytes_ext *bytes_ext = + (struct soc_bytes_ext *) kcontrol->private_value; + unsigned char *dst = ucontrol->value.bytes.data; + unsigned int reg; + int rc = -1; + + if (tas_priv->chip_id == TAS2781) + reg = TAS2781_PRM_R0_REG; + else + reg = TAS2563_PRM_R0_REG; + mutex_lock(&tas_priv->codec_lock); + rc = calib_data_get(tas_priv, reg, dst, bytes_ext->max - 1); + mutex_unlock(&tas_priv->codec_lock); + + return rc; +} + +static int tasdev_XMA1_data_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(comp); + struct soc_bytes_ext *bytes_ext = + (struct soc_bytes_ext *) kcontrol->private_value; + unsigned char *dst = ucontrol->value.bytes.data; + unsigned int reg = TASDEVICE_XM_A1_REG; + int rc = -1; + + mutex_lock(&tas_priv->codec_lock); + rc = calib_data_get(tas_priv, reg, dst, bytes_ext->max - 1); + mutex_unlock(&tas_priv->codec_lock); + + return rc; +} + +static int tasdev_XMA2_data_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(comp); + struct soc_bytes_ext *bytes_ext = + (struct soc_bytes_ext *) kcontrol->private_value; + unsigned char *dst = ucontrol->value.bytes.data; + unsigned int reg = TASDEVICE_XM_A2_REG; + int rc = -1; + + mutex_lock(&tas_priv->codec_lock); + rc = calib_data_get(tas_priv, reg, dst, bytes_ext->max - 1); + mutex_unlock(&tas_priv->codec_lock); + + return rc; +} + +static int tasdev_nop_get( + struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + return 0; +} + static int tas2563_digital_gain_get( struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) @@ -241,6 +817,16 @@ static const struct snd_kcontrol_new tasdevice_snd_controls[] = { tasdev_force_fwload_get, tasdev_force_fwload_put), }; +static const struct snd_kcontrol_new tasdevice_cali_controls[] = { + SOC_SINGLE_EXT("Calibration Stop", SND_SOC_NOPM, 0, 1, 0, + tasdev_nop_get, tasdev_calib_stop_put), + SND_SOC_BYTES_EXT("Amp TF Data", 5, tasdev_tf_data_get, NULL), + SND_SOC_BYTES_EXT("Amp RE Data", 5, tasdev_re_data_get, NULL), + SND_SOC_BYTES_EXT("Amp R0 Data", 5, tasdev_r0_data_get, NULL), + SND_SOC_BYTES_EXT("Amp XMA1 Data", 5, tasdev_XMA1_data_get, NULL), + SND_SOC_BYTES_EXT("Amp XMA2 Data", 5, tasdev_XMA2_data_get, NULL), +}; + static const struct snd_kcontrol_new tas2781_snd_controls[] = { SOC_SINGLE_RANGE_EXT_TLV("Speaker Analog Gain", TAS2781_AMP_LEVEL, 1, 0, 20, 0, tas2781_amp_getvol, @@ -250,6 +836,10 @@ static const struct snd_kcontrol_new tas2781_snd_controls[] = { tas2781_digital_putvol, dvc_tlv), }; +static const struct snd_kcontrol_new tas2781_cali_controls[] = { + SND_SOC_BYTES_EXT("Amp Latch Data", 2, tas2781_latch_reg_get, NULL), +}; + static const struct snd_kcontrol_new tas2563_snd_controls[] = { SOC_SINGLE_RANGE_EXT_TLV("Speaker Digital Volume", TAS2563_DVC_LVL, 0, 0, ARRAY_SIZE(tas2563_dvc_table) - 1, 0, @@ -257,6 +847,11 @@ static const struct snd_kcontrol_new tas2563_snd_controls[] = { tas2563_dvc_tlv), }; +static const struct snd_kcontrol_new tas2563_cali_controls[] = { + SOC_SINGLE_EXT("Calibration Start", SND_SOC_NOPM, 0, 1, 0, + tasdev_nop_get, tas2563_calib_start_put), +}; + static int tasdevice_set_profile_id(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { @@ -274,6 +869,31 @@ static int tasdevice_set_profile_id(struct snd_kcontrol *kcontrol, return ret; } +static int tasdevice_info_active_num(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(codec); + + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = tas_priv->ndev - 1; + + return 0; +} + +static int tasdevice_info_chip_id(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = TAS2563; + uinfo->value.integer.max = TAS2781; + + return 0; +} + static int tasdevice_info_programs(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) { @@ -330,29 +950,37 @@ static int tasdevice_get_profile_id(struct snd_kcontrol *kcontrol, return 0; } +static int tasdevice_get_chip_id(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(codec); + + ucontrol->value.integer.value[0] = tas_priv->chip_id; + + return 0; +} + static int tasdevice_create_control(struct tasdevice_priv *tas_priv) { struct snd_kcontrol_new *prof_ctrls; - int nr_controls = 1; + char *name; + int nr_controls = 2; int mix_index = 0; int ret; - char *name; prof_ctrls = devm_kcalloc(tas_priv->dev, nr_controls, sizeof(prof_ctrls[0]), GFP_KERNEL); - if (!prof_ctrls) { - ret = -ENOMEM; - goto out; - } + if (!prof_ctrls) + return -ENOMEM; /* Create a mixer item for selecting the active profile */ name = devm_kzalloc(tas_priv->dev, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, GFP_KERNEL); - if (!name) { - ret = -ENOMEM; - goto out; - } - scnprintf(name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, "Speaker Profile Id"); + if (!name) + return -ENOMEM; + + strscpy(name, "Speaker Profile Id", SNDRV_CTL_ELEM_ID_NAME_MAXLEN); prof_ctrls[mix_index].name = name; prof_ctrls[mix_index].iface = SNDRV_CTL_ELEM_IFACE_MIXER; prof_ctrls[mix_index].info = tasdevice_info_profile; @@ -363,7 +991,6 @@ static int tasdevice_create_control(struct tasdevice_priv *tas_priv) ret = snd_soc_add_component_controls(tas_priv->codec, prof_ctrls, nr_controls < mix_index ? nr_controls : mix_index); -out: return ret; } @@ -423,12 +1050,48 @@ static int tasdevice_configuration_put( return ret; } -static int tasdevice_dsp_create_ctrls( - struct tasdevice_priv *tas_priv) +static int tasdevice_active_num_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(codec); + struct i2c_client *clt = (struct i2c_client *)tas_priv->client; + struct tasdevice *tasdev = tas_priv->tasdevice; + int i; + + for (i = 0; i < tas_priv->ndev; i++) { + if (clt->addr == tasdev[i].dev_addr) { + ucontrol->value.integer.value[0] = i; + return 0; + } + } + + return -1; +} + +static int tasdevice_active_num_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(codec); + int dev_id = ucontrol->value.integer.value[0]; + int max = tas_priv->ndev - 1, rc; + + dev_id = clamp(dev_id, 0, max); + + mutex_lock(&tas_priv->codec_lock); + rc = tasdev_chn_switch(tas_priv, dev_id); + mutex_unlock(&tas_priv->codec_lock); + + return rc; +} + +static int tasdevice_dsp_create_ctrls(struct tasdevice_priv *tas_priv) { struct snd_kcontrol_new *dsp_ctrls; - char *prog_name, *conf_name; - int nr_controls = 2; + char *active_dev_num, *chip_id; + char *conf_name, *prog_name; + int nr_controls = 4; int mix_index = 0; int ret; @@ -437,23 +1100,23 @@ static int tasdevice_dsp_create_ctrls( */ dsp_ctrls = devm_kcalloc(tas_priv->dev, nr_controls, sizeof(dsp_ctrls[0]), GFP_KERNEL); - if (!dsp_ctrls) { - ret = -ENOMEM; - goto out; - } + if (!dsp_ctrls) + return -ENOMEM; /* Create a mixer item for selecting the active profile */ - prog_name = devm_kzalloc(tas_priv->dev, + active_dev_num = devm_kzalloc(tas_priv->dev, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, GFP_KERNEL); - conf_name = devm_kzalloc(tas_priv->dev, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, + conf_name = devm_kzalloc(tas_priv->dev, + SNDRV_CTL_ELEM_ID_NAME_MAXLEN, GFP_KERNEL); + prog_name = devm_kzalloc(tas_priv->dev, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, GFP_KERNEL); - if (!prog_name || !conf_name) { - ret = -ENOMEM; - goto out; - } + chip_id = devm_kzalloc(tas_priv->dev, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, + GFP_KERNEL); + if (!active_dev_num || !conf_name || !chip_id || !prog_name) + return -ENOMEM; - scnprintf(prog_name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, - "Speaker Program Id"); + strscpy(prog_name, "Speaker Program Id", + SNDRV_CTL_ELEM_ID_NAME_MAXLEN); dsp_ctrls[mix_index].name = prog_name; dsp_ctrls[mix_index].iface = SNDRV_CTL_ELEM_IFACE_MIXER; dsp_ctrls[mix_index].info = tasdevice_info_programs; @@ -461,8 +1124,7 @@ static int tasdevice_dsp_create_ctrls( dsp_ctrls[mix_index].put = tasdevice_program_put; mix_index++; - scnprintf(conf_name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, - "Speaker Config Id"); + strscpy(conf_name, "Speaker Config Id", SNDRV_CTL_ELEM_ID_NAME_MAXLEN); dsp_ctrls[mix_index].name = conf_name; dsp_ctrls[mix_index].iface = SNDRV_CTL_ELEM_IFACE_MIXER; dsp_ctrls[mix_index].info = tasdevice_info_configurations; @@ -470,13 +1132,154 @@ static int tasdevice_dsp_create_ctrls( dsp_ctrls[mix_index].put = tasdevice_configuration_put; mix_index++; + strscpy(active_dev_num, "Activate Tasdevice Num", + SNDRV_CTL_ELEM_ID_NAME_MAXLEN); + dsp_ctrls[mix_index].name = active_dev_num; + dsp_ctrls[mix_index].iface = SNDRV_CTL_ELEM_IFACE_MIXER; + dsp_ctrls[mix_index].info = tasdevice_info_active_num; + dsp_ctrls[mix_index].get = tasdevice_active_num_get; + dsp_ctrls[mix_index].put = tasdevice_active_num_put; + mix_index++; + + strscpy(chip_id, "Tasdevice Chip Id", SNDRV_CTL_ELEM_ID_NAME_MAXLEN); + dsp_ctrls[mix_index].name = chip_id; + dsp_ctrls[mix_index].iface = SNDRV_CTL_ELEM_IFACE_MIXER; + dsp_ctrls[mix_index].info = tasdevice_info_chip_id; + dsp_ctrls[mix_index].get = tasdevice_get_chip_id; + mix_index++; + ret = snd_soc_add_component_controls(tas_priv->codec, dsp_ctrls, nr_controls < mix_index ? nr_controls : mix_index); -out: return ret; } +static int tasdevice_create_cali_ctrls(struct tasdevice_priv *tas_priv) +{ + struct calidata *cali_data = &tas_priv->cali_data; + struct tasdevice *tasdev = tas_priv->tasdevice; + struct soc_bytes_ext *ext_cali_data; + struct snd_kcontrol_new *cali_ctrls; + unsigned int num_controls; + char *cali_name; + int rc, i; + + rc = snd_soc_add_component_controls(tas_priv->codec, + tasdevice_cali_controls, ARRAY_SIZE(tasdevice_cali_controls)); + if (rc < 0) { + dev_err(tas_priv->dev, "%s: Add cali controls err rc = %d", + __func__, rc); + return rc; + } + + if (tas_priv->chip_id == TAS2781) { + cali_ctrls = (struct snd_kcontrol_new *)tas2781_cali_controls; + num_controls = ARRAY_SIZE(tas2781_cali_controls); + cali_data->reg_array = (unsigned int *)tas2781_cali_data_reg; + cali_data->reg_array_sz = ARRAY_SIZE(tas2781_cali_data_reg); + for (i = 0; i < tas_priv->ndev; i++) { + tasdev[i].cali_data_restore = + kmemdup(tas2781_cali_start_reg, + sizeof(tas2781_cali_start_reg), GFP_KERNEL); + if (!tasdev[i].cali_data_restore) + return -ENOMEM; + } + } else { + cali_ctrls = (struct snd_kcontrol_new *)tas2563_cali_controls; + num_controls = ARRAY_SIZE(tas2563_cali_controls); + cali_data->reg_array = (unsigned int *)tas2563_cali_data_reg; + cali_data->reg_array_sz = ARRAY_SIZE(tas2563_cali_data_reg); + for (i = 0; i < tas_priv->ndev; i++) { + tasdev[i].cali_data_restore = + kmemdup(tas2563_cali_start_reg, + sizeof(tas2563_cali_start_reg), GFP_KERNEL); + if (!tasdev[i].cali_data_restore) + return -ENOMEM; + } + } + + rc = snd_soc_add_component_controls(tas_priv->codec, cali_ctrls, + num_controls); + if (rc < 0) { + dev_err(tas_priv->dev, "%s: Add chip cali ctrls err rc = %d", + __func__, rc); + return rc; + } + + /* index for cali_ctrls */ + i = 0; + if (tas_priv->chip_id == TAS2781) + num_controls = 2; + else + num_controls = 1; + + /* + * Alloc kcontrol via devm_kzalloc, which don't manually + * free the kcontrol + */ + cali_ctrls = devm_kcalloc(tas_priv->dev, num_controls, + sizeof(cali_ctrls[0]), GFP_KERNEL); + if (!cali_ctrls) + return -ENOMEM; + + cali_name = devm_kzalloc(tas_priv->dev, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, + GFP_KERNEL); + ext_cali_data = devm_kzalloc(tas_priv->dev, sizeof(*ext_cali_data), + GFP_KERNEL); + if (!cali_name || !ext_cali_data) + return -ENOMEM; + + strscpy(cali_name, "Speaker Calibrated Data", + SNDRV_CTL_ELEM_ID_NAME_MAXLEN); + /* the number of calibrated data per tas2563/tas2781 */ + cali_data->cali_dat_sz = cali_data->reg_array_sz * 4; + ext_cali_data->max = tas_priv->ndev * + (cali_data->cali_dat_sz + 1) + 1; + tas_priv->cali_data.total_sz = ext_cali_data->max; + tas_priv->cali_data.data = devm_kzalloc(tas_priv->dev, + ext_cali_data->max, GFP_KERNEL); + cali_ctrls[i].name = cali_name; + cali_ctrls[i].iface = SNDRV_CTL_ELEM_IFACE_MIXER; + cali_ctrls[i].info = snd_soc_bytes_info_ext; + cali_ctrls[i].get = tasdev_cali_data_get; + cali_ctrls[i].put = tasdev_cali_data_put; + cali_ctrls[i].private_value = (unsigned long)ext_cali_data; + i++; + + cali_data->data = devm_kzalloc(tas_priv->dev, cali_data->total_sz, + GFP_KERNEL); + if (!cali_data->data) + return -ENOMEM; + + if (tas_priv->chip_id == TAS2781) { + struct soc_bytes_ext *ext_cali_start; + char *cali_start_name; + + cali_start_name = devm_kzalloc(tas_priv->dev, + SNDRV_CTL_ELEM_ID_NAME_MAXLEN, GFP_KERNEL); + ext_cali_start = devm_kzalloc(tas_priv->dev, + sizeof(*ext_cali_start), GFP_KERNEL); + if (!cali_start_name || !ext_cali_start) + return -ENOMEM; + + strscpy(cali_start_name, "Calibration Start", + SNDRV_CTL_ELEM_ID_NAME_MAXLEN); + ext_cali_data->max = tas_priv->ndev * 9; + cali_ctrls[i].name = cali_start_name; + cali_ctrls[i].iface = SNDRV_CTL_ELEM_IFACE_MIXER; + cali_ctrls[i].info = snd_soc_bytes_info_ext; + cali_ctrls[i].put = tas2781_calib_start_put; + cali_ctrls[i].get = tasdev_nop_get; + cali_ctrls[i].private_value = (unsigned long)ext_cali_start; + i++; + } + + rc = snd_soc_add_component_controls(tas_priv->codec, cali_ctrls, + num_controls < i ? num_controls : i); + + return rc; +} + static void tasdevice_fw_ready(const struct firmware *fmw, void *context) { @@ -523,6 +1326,12 @@ static void tasdevice_fw_ready(const struct firmware *fmw, goto out; } + ret = tasdevice_create_cali_ctrls(tas_priv); + if (ret) { + dev_err(tas_priv->dev, "cali controls error\n"); + goto out; + } + tas_priv->fw_state = TASDEVICE_DSP_FW_ALL_OK; /* If calibrated data occurs error, dsp will still works with default @@ -558,18 +1367,14 @@ static void tasdevice_fw_ready(const struct firmware *fmw, release_firmware(fmw); } -static int tasdevice_dapm_event(struct snd_soc_dapm_widget *w, - struct snd_kcontrol *kcontrol, int event) +static int tasdevice_mute(struct snd_soc_dai *dai, int mute, int stream) { - struct snd_soc_component *codec = snd_soc_dapm_to_component(w->dapm); + struct snd_soc_component *codec = dai->component; struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(codec); - int state = 0; /* Codec Lock Hold */ mutex_lock(&tas_priv->codec_lock); - if (event == SND_SOC_DAPM_PRE_PMD) - state = 1; - tasdevice_tuning_switch(tas_priv, state); + tasdevice_tuning_switch(tas_priv, mute); /* Codec Lock Release*/ mutex_unlock(&tas_priv->codec_lock); @@ -578,18 +1383,16 @@ static int tasdevice_dapm_event(struct snd_soc_dapm_widget *w, static const struct snd_soc_dapm_widget tasdevice_dapm_widgets[] = { SND_SOC_DAPM_AIF_IN("ASI", "ASI Playback", 0, SND_SOC_NOPM, 0, 0), - SND_SOC_DAPM_AIF_OUT_E("ASI OUT", "ASI Capture", 0, SND_SOC_NOPM, - 0, 0, tasdevice_dapm_event, - SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), - SND_SOC_DAPM_SPK("SPK", tasdevice_dapm_event), + SND_SOC_DAPM_AIF_OUT("ASI OUT", "ASI Capture", 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_SPK("SPK", NULL), SND_SOC_DAPM_OUTPUT("OUT"), - SND_SOC_DAPM_INPUT("DMIC") + SND_SOC_DAPM_INPUT("DMIC"), }; static const struct snd_soc_dapm_route tasdevice_audio_map[] = { {"SPK", NULL, "ASI"}, {"OUT", NULL, "SPK"}, - {"ASI OUT", NULL, "DMIC"} + {"ASI OUT", NULL, "DMIC"}, }; static int tasdevice_startup(struct snd_pcm_substream *substream, @@ -668,11 +1471,12 @@ static const struct snd_soc_dai_ops tasdevice_dai_ops = { .startup = tasdevice_startup, .hw_params = tasdevice_hw_params, .set_sysclk = tasdevice_set_dai_sysclk, + .mute_stream = tasdevice_mute, }; static struct snd_soc_dai_driver tasdevice_dai_driver[] = { { - .name = "tas2781_codec", + .name = "tasdev_codec", .id = 0, .playback = { .stream_name = "Playback", @@ -724,6 +1528,11 @@ static int tasdevice_codec_probe(struct snd_soc_component *codec) static void tasdevice_deinit(void *context) { struct tasdevice_priv *tas_priv = (struct tasdevice_priv *) context; + struct tasdevice *tasdev = tas_priv->tasdevice; + int i; + + for (i = 0; i < tas_priv->ndev; i++) + kfree(tasdev[i].cali_data_restore); tasdevice_config_info_remove(tas_priv); tasdevice_dsp_remove(tas_priv); -- 2.34.1

2 1

[PATCH] ASoC: MAINTAINERS: Drop Banajit Goswami from Qualcomm sound drivers
by Krzysztof Kozlowski 13 Aug '24

13 Aug '24

There was no active maintenance from Banajit Goswami - last email is from 2019 - so make obvious that Qualcomm sound drivers are maintained by only one person. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- Not moving to credits because lore does not point to significant contributions. Just ~140 emails: https://lore.kernel.org/all/?q=f%3A%22Banajit+Goswami%22 --- MAINTAINERS | 1 - 1 file changed, 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index c8e16a649a0e..43e7668aacb0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -18419,7 +18419,6 @@ F: drivers/crypto/intel/qat/ QCOM AUDIO (ASoC) DRIVERS M: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> -M: Banajit Goswami <bgoswami(a)quicinc.com> L: alsa-devel(a)alsa-project.org (moderated for non-subscribers) L: linux-arm-msm(a)vger.kernel.org S: Supported -- 2.43.0

2 2

[PATCH v1] ASoc: tas2781: Add new Kontrol to set tas2563 digital gain
by Shenghao Ding 11 Aug '24

11 Aug '24

Requriment from customer to add new kcontrol to set tas2563 digital gain and set "Speaker Force Firmware Load" as the common kcontrol for both tas27871 and tas2563. Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- v1: - Changed the copyright year to 2024 in tas2781-tlv.h. - Changed the copyright year to 2024 in tas2781.h. - Set "Speaker Force Firmware Load" as the common kcontrol for for both tas27871 and tas2563, that is tasdevice_snd_controls. - Only tas2781_snd_controls only for gain setting. - Add tas2563_dvc_tlv kcontrol for tas2563 digital gain setting. - In codec probe, for tas2563, loading tas2563 gain control; for tas2781, loading tas2781 gain control. --- include/sound/tas2781-tlv.h | 262 ++++++++++++++++++++++++++++++++- include/sound/tas2781.h | 3 +- sound/soc/codecs/tas2781-i2c.c | 135 ++++++++++++++++- 3 files changed, 392 insertions(+), 8 deletions(-) diff --git a/include/sound/tas2781-tlv.h b/include/sound/tas2781-tlv.h index 1dc59005d241..99c41bfc7827 100644 --- a/include/sound/tas2781-tlv.h +++ b/include/sound/tas2781-tlv.h @@ -2,7 +2,7 @@ // // ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier // -// Copyright (C) 2022 - 2023 Texas Instruments Incorporated +// Copyright (C) 2022 - 2024 Texas Instruments Incorporated // https://www.ti.com // // The TAS2781 driver implements a flexible and configurable @@ -17,5 +17,265 @@ static const __maybe_unused DECLARE_TLV_DB_SCALE(dvc_tlv, -10000, 100, 0); static const DECLARE_TLV_DB_SCALE(amp_vol_tlv, 1100, 50, 0); +static const DECLARE_TLV_DB_SCALE(tas2563_dvc_tlv, -12150, 50, 1); +/* pow(10, db/20) * pow(2,30) */ +static const unsigned char tas2563_dvc_table[][4] = { + { 0X00, 0X00, 0X00, 0X00 }, /* -121.5db */ + { 0X00, 0X00, 0X03, 0XBC }, /* -121.0db */ + { 0X00, 0X00, 0X03, 0XF5 }, /* -120.5db */ + { 0X00, 0X00, 0X04, 0X31 }, /* -120.0db */ + { 0X00, 0X00, 0X04, 0X71 }, /* -119.5db */ + { 0X00, 0X00, 0X04, 0XB4 }, /* -119.0db */ + { 0X00, 0X00, 0X04, 0XFC }, /* -118.5db */ + { 0X00, 0X00, 0X05, 0X47 }, /* -118.0db */ + { 0X00, 0X00, 0X05, 0X97 }, /* -117.5db */ + { 0X00, 0X00, 0X05, 0XEC }, /* -117.0db */ + { 0X00, 0X00, 0X06, 0X46 }, /* -116.5db */ + { 0X00, 0X00, 0X06, 0XA5 }, /* -116.0db */ + { 0X00, 0X00, 0X07, 0X0A }, /* -115.5db */ + { 0X00, 0X00, 0X07, 0X75 }, /* -115.0db */ + { 0X00, 0X00, 0X07, 0XE6 }, /* -114.5db */ + { 0X00, 0X00, 0X08, 0X5E }, /* -114.0db */ + { 0X00, 0X00, 0X08, 0XDD }, /* -113.5db */ + { 0X00, 0X00, 0X09, 0X63 }, /* -113.0db */ + { 0X00, 0X00, 0X09, 0XF2 }, /* -112.5db */ + { 0X00, 0X00, 0X0A, 0X89 }, /* -112.0db */ + { 0X00, 0X00, 0X0B, 0X28 }, /* -111.5db */ + { 0X00, 0X00, 0X0B, 0XD2 }, /* -111.0db */ + { 0X00, 0X00, 0X0C, 0X85 }, /* -110.5db */ + { 0X00, 0X00, 0X0D, 0X43 }, /* -110.0db */ + { 0X00, 0X00, 0X0E, 0X0C }, /* -109.5db */ + { 0X00, 0X00, 0X0E, 0XE1 }, /* -109.0db */ + { 0X00, 0X00, 0X0F, 0XC3 }, /* -108.5db */ + { 0X00, 0X00, 0X10, 0XB2 }, /* -108.0db */ + { 0X00, 0X00, 0X11, 0XAF }, /* -107.5db */ + { 0X00, 0X00, 0X12, 0XBC }, /* -107.0db */ + { 0X00, 0X00, 0X13, 0XD8 }, /* -106.5db */ + { 0X00, 0X00, 0X15, 0X05 }, /* -106.0db */ + { 0X00, 0X00, 0X16, 0X44 }, /* -105.5db */ + { 0X00, 0X00, 0X17, 0X96 }, /* -105.0db */ + { 0X00, 0X00, 0X18, 0XFB }, /* -104.5db */ + { 0X00, 0X00, 0X1A, 0X76 }, /* -104.0db */ + { 0X00, 0X00, 0X1C, 0X08 }, /* -103.5db */ + { 0X00, 0X00, 0X1D, 0XB1 }, /* -103.0db */ + { 0X00, 0X00, 0X1F, 0X73 }, /* -102.5db */ + { 0X00, 0X00, 0X21, 0X51 }, /* -102.0db */ + { 0X00, 0X00, 0X23, 0X4A }, /* -101.5db */ + { 0X00, 0X00, 0X25, 0X61 }, /* -101.0db */ + { 0X00, 0X00, 0X27, 0X98 }, /* -100.5db */ + { 0X00, 0X00, 0X29, 0XF1 }, /* -100.0db */ + { 0X00, 0X00, 0X2C, 0X6D }, /* -99.5db */ + { 0X00, 0X00, 0X2F, 0X0F }, /* -99.0db */ + { 0X00, 0X00, 0X31, 0XD9 }, /* -98.5db */ + { 0X00, 0X00, 0X34, 0XCD }, /* -98.0db */ + { 0X00, 0X00, 0X37, 0XEE }, /* -97.5db */ + { 0X00, 0X00, 0X3B, 0X3F }, /* -97.0db */ + { 0X00, 0X00, 0X3E, 0XC1 }, /* -96.5db */ + { 0X00, 0X00, 0X42, 0X79 }, /* -96.0db */ + { 0X00, 0X00, 0X46, 0X6A }, /* -95.5db */ + { 0X00, 0X00, 0X4A, 0X96 }, /* -95.0db */ + { 0X00, 0X00, 0X4F, 0X01 }, /* -94.5db */ + { 0X00, 0X00, 0X53, 0XAF }, /* -94.0db */ + { 0X00, 0X00, 0X58, 0XA5 }, /* -93.5db */ + { 0X00, 0X00, 0X5D, 0XE6 }, /* -93.0db */ + { 0X00, 0X00, 0X63, 0X76 }, /* -92.5db */ + { 0X00, 0X00, 0X69, 0X5B }, /* -92.0db */ + { 0X00, 0X00, 0X6F, 0X99 }, /* -91.5db */ + { 0X00, 0X00, 0X76, 0X36 }, /* -91.0db */ + { 0X00, 0X00, 0X7D, 0X37 }, /* -90.5db */ + { 0X00, 0X00, 0X84, 0XA2 }, /* -90.0db */ + { 0X00, 0X00, 0X8C, 0X7E }, /* -89.5db */ + { 0X00, 0X00, 0X94, 0XD1 }, /* -89.0db */ + { 0X00, 0X00, 0X9D, 0XA3 }, /* -88.5db */ + { 0X00, 0X00, 0XA6, 0XFA }, /* -88.0db */ + { 0X00, 0X00, 0XB0, 0XDF }, /* -87.5db */ + { 0X00, 0X00, 0XBB, 0X5A }, /* -87.0db */ + { 0X00, 0X00, 0XC6, 0X74 }, /* -86.5db */ + { 0X00, 0X00, 0XD2, 0X36 }, /* -86.0db */ + { 0X00, 0X00, 0XDE, 0XAB }, /* -85.5db */ + { 0X00, 0X00, 0XEB, 0XDC }, /* -85.0db */ + { 0X00, 0X00, 0XF9, 0XD6 }, /* -84.5db */ + { 0X00, 0X01, 0X08, 0XA4 }, /* -84.0db */ + { 0X00, 0X01, 0X18, 0X52 }, /* -83.5db */ + { 0X00, 0X01, 0X28, 0XEF }, /* -83.0db */ + { 0X00, 0X01, 0X3A, 0X87 }, /* -82.5db */ + { 0X00, 0X01, 0X4D, 0X2A }, /* -82.0db */ + { 0X00, 0X01, 0X60, 0XE8 }, /* -81.5db */ + { 0X00, 0X01, 0X75, 0XD1 }, /* -81.0db */ + { 0X00, 0X01, 0X8B, 0XF7 }, /* -80.5db */ + { 0X00, 0X01, 0XA3, 0X6E }, /* -80.0db */ + { 0X00, 0X01, 0XBC, 0X48 }, /* -79.5db */ + { 0X00, 0X01, 0XD6, 0X9B }, /* -79.0db */ + { 0X00, 0X01, 0XF2, 0X7E }, /* -78.5db */ + { 0X00, 0X02, 0X10, 0X08 }, /* -78.0db */ + { 0X00, 0X02, 0X2F, 0X51 }, /* -77.5db */ + { 0X00, 0X02, 0X50, 0X76 }, /* -77.0db */ + { 0X00, 0X02, 0X73, 0X91 }, /* -76.5db */ + { 0X00, 0X02, 0X98, 0XC0 }, /* -76.0db */ + { 0X00, 0X02, 0XC0, 0X24 }, /* -75.5db */ + { 0X00, 0X02, 0XE9, 0XDD }, /* -75.0db */ + { 0X00, 0X03, 0X16, 0X0F }, /* -74.5db */ + { 0X00, 0X03, 0X44, 0XDF }, /* -74.0db */ + { 0X00, 0X03, 0X76, 0X76 }, /* -73.5db */ + { 0X00, 0X03, 0XAA, 0XFC }, /* -73.0db */ + { 0X00, 0X03, 0XE2, 0XA0 }, /* -72.5db */ + { 0X00, 0X04, 0X1D, 0X8F }, /* -72.0db */ + { 0X00, 0X04, 0X5B, 0XFD }, /* -71.5db */ + { 0X00, 0X04, 0X9E, 0X1D }, /* -71.0db */ + { 0X00, 0X04, 0XE4, 0X29 }, /* -70.5db */ + { 0X00, 0X05, 0X2E, 0X5A }, /* -70.0db */ + { 0X00, 0X05, 0X7C, 0XF2 }, /* -69.5db */ + { 0X00, 0X05, 0XD0, 0X31 }, /* -69.0db */ + { 0X00, 0X06, 0X28, 0X60 }, /* -68.5db */ + { 0X00, 0X06, 0X85, 0XC8 }, /* -68.0db */ + { 0X00, 0X06, 0XE8, 0XB9 }, /* -67.5db */ + { 0X00, 0X07, 0X51, 0X86 }, /* -67.0db */ + { 0X00, 0X07, 0XC0, 0X8A }, /* -66.5db */ + { 0X00, 0X08, 0X36, 0X21 }, /* -66.0db */ + { 0X00, 0X08, 0XB2, 0XB0 }, /* -65.5db */ + { 0X00, 0X09, 0X36, 0XA1 }, /* -65.0db */ + { 0X00, 0X09, 0XC2, 0X63 }, /* -64.5db */ + { 0X00, 0X0A, 0X56, 0X6D }, /* -64.0db */ + { 0X00, 0X0A, 0XF3, 0X3C }, /* -63.5db */ + { 0X00, 0X0B, 0X99, 0X56 }, /* -63.0db */ + { 0X00, 0X0C, 0X49, 0X48 }, /* -62.5db */ + { 0X00, 0X0D, 0X03, 0XA7 }, /* -62.0db */ + { 0X00, 0X0D, 0XC9, 0X11 }, /* -61.5db */ + { 0X00, 0X0E, 0X9A, 0X2D }, /* -61.0db */ + { 0X00, 0X0F, 0X77, 0XAD }, /* -60.5db */ + { 0X00, 0X10, 0X62, 0X4D }, /* -60.0db */ + { 0X00, 0X11, 0X5A, 0XD5 }, /* -59.5db */ + { 0X00, 0X12, 0X62, 0X16 }, /* -59.0db */ + { 0X00, 0X13, 0X78, 0XF0 }, /* -58.5db */ + { 0X00, 0X14, 0XA0, 0X50 }, /* -58.0db */ + { 0X00, 0X15, 0XD9, 0X31 }, /* -57.5db */ + { 0X00, 0X17, 0X24, 0X9C }, /* -57.0db */ + { 0X00, 0X18, 0X83, 0XAA }, /* -56.5db */ + { 0X00, 0X19, 0XF7, 0X86 }, /* -56.0db */ + { 0X00, 0X1B, 0X81, 0X6A }, /* -55.5db */ + { 0X00, 0X1D, 0X22, 0XA4 }, /* -55.0db */ + { 0X00, 0X1E, 0XDC, 0X98 }, /* -54.5db */ + { 0X00, 0X20, 0XB0, 0XBC }, /* -54.0db */ + { 0X00, 0X22, 0XA0, 0X9D }, /* -53.5db */ + { 0X00, 0X24, 0XAD, 0XE0 }, /* -53.0db */ + { 0X00, 0X26, 0XDA, 0X43 }, /* -52.5db */ + { 0X00, 0X29, 0X27, 0X9D }, /* -52.0db */ + { 0X00, 0X2B, 0X97, 0XE3 }, /* -51.5db */ + { 0X00, 0X2E, 0X2D, 0X27 }, /* -51.0db */ + { 0X00, 0X30, 0XE9, 0X9A }, /* -50.5db */ + { 0X00, 0X33, 0XCF, 0X8D }, /* -50.0db */ + { 0X00, 0X36, 0XE1, 0X78 }, /* -49.5db */ + { 0X00, 0X3A, 0X21, 0XF3 }, /* -49.0db */ + { 0X00, 0X3D, 0X93, 0XC3 }, /* -48.5db */ + { 0X00, 0X41, 0X39, 0XD3 }, /* -48.0db */ + { 0X00, 0X45, 0X17, 0X3B }, /* -47.5db */ + { 0X00, 0X49, 0X2F, 0X44 }, /* -47.0db */ + { 0X00, 0X4D, 0X85, 0X66 }, /* -46.5db */ + { 0X00, 0X52, 0X1D, 0X50 }, /* -46.0db */ + { 0X00, 0X56, 0XFA, 0XE8 }, /* -45.5db */ + { 0X00, 0X5C, 0X22, 0X4E }, /* -45.0db */ + { 0X00, 0X61, 0X97, 0XE1 }, /* -44.5db */ + { 0X00, 0X67, 0X60, 0X44 }, /* -44.0db */ + { 0X00, 0X6D, 0X80, 0X60 }, /* -43.5db */ + { 0X00, 0X73, 0XFD, 0X65 }, /* -43.0db */ + { 0X00, 0X7A, 0XDC, 0XD7 }, /* -42.5db */ + { 0X00, 0X82, 0X24, 0X8A }, /* -42.0db */ + { 0X00, 0X89, 0XDA, 0XAB }, /* -41.5db */ + { 0X00, 0X92, 0X05, 0XC6 }, /* -41.0db */ + { 0X00, 0X9A, 0XAC, 0XC8 }, /* -40.5db */ + { 0X00, 0XA3, 0XD7, 0X0A }, /* -40.0db */ + { 0X00, 0XAD, 0X8C, 0X52 }, /* -39.5db */ + { 0X00, 0XB7, 0XD4, 0XDD }, /* -39.0db */ + { 0X00, 0XC2, 0XB9, 0X65 }, /* -38.5db */ + { 0X00, 0XCE, 0X43, 0X28 }, /* -38.0db */ + { 0X00, 0XDA, 0X7B, 0XF1 }, /* -37.5db */ + { 0X00, 0XE7, 0X6E, 0X1E }, /* -37.0db */ + { 0X00, 0XF5, 0X24, 0XAC }, /* -36.5db */ + { 0X01, 0X03, 0XAB, 0X3D }, /* -36.0db */ + { 0X01, 0X13, 0X0E, 0X24 }, /* -35.5db */ + { 0X01, 0X23, 0X5A, 0X71 }, /* -35.0db */ + { 0X01, 0X34, 0X9D, 0XF8 }, /* -34.5db */ + { 0X01, 0X46, 0XE7, 0X5D }, /* -34.0db */ + { 0X01, 0X5A, 0X46, 0X27 }, /* -33.5db */ + { 0X01, 0X6E, 0XCA, 0XC5 }, /* -33.0db */ + { 0X01, 0X84, 0X86, 0X9F }, /* -32.5db */ + { 0X01, 0X9B, 0X8C, 0X27 }, /* -32.0db */ + { 0X01, 0XB3, 0XEE, 0XE5 }, /* -31.5db */ + { 0X01, 0XCD, 0XC3, 0X8C }, /* -31.0db */ + { 0X01, 0XE9, 0X20, 0X05 }, /* -30.5db */ + { 0X02, 0X06, 0X1B, 0X89 }, /* -30.0db */ + { 0X02, 0X24, 0XCE, 0XB0 }, /* -29.5db */ + { 0X02, 0X45, 0X53, 0X85 }, /* -29.0db */ + { 0X02, 0X67, 0XC5, 0XA2 }, /* -28.5db */ + { 0X02, 0X8C, 0X42, 0X3F }, /* -28.0db */ + { 0X02, 0XB2, 0XE8, 0X55 }, /* -27.5db */ + { 0X02, 0XDB, 0XD8, 0XAD }, /* -27.0db */ + { 0X03, 0X07, 0X36, 0X05 }, /* -26.5db */ + { 0X03, 0X35, 0X25, 0X29 }, /* -26.0db */ + { 0X03, 0X65, 0XCD, 0X13 }, /* -25.5db */ + { 0X03, 0X99, 0X57, 0X0C }, /* -25.0db */ + { 0X03, 0XCF, 0XEE, 0XCF }, /* -24.5db */ + { 0X04, 0X09, 0XC2, 0XB0 }, /* -24.0db */ + { 0X04, 0X47, 0X03, 0XC1 }, /* -23.5db */ + { 0X04, 0X87, 0XE5, 0XFB }, /* -23.0db */ + { 0X04, 0XCC, 0XA0, 0X6D }, /* -22.5db */ + { 0X05, 0X15, 0X6D, 0X68 }, /* -22.0db */ + { 0X05, 0X62, 0X8A, 0XB3 }, /* -21.5db */ + { 0X05, 0XB4, 0X39, 0XBC }, /* -21.0db */ + { 0X06, 0X0A, 0XBF, 0XD4 }, /* -20.5db */ + { 0X06, 0X66, 0X66, 0X66 }, /* -20.0db */ + { 0X06, 0XC7, 0X7B, 0X36 }, /* -19.5db */ + { 0X07, 0X2E, 0X50, 0XA6 }, /* -19.0db */ + { 0X07, 0X9B, 0X3D, 0XF6 }, /* -18.5db */ + { 0X08, 0X0E, 0X9F, 0X96 }, /* -18.0db */ + { 0X08, 0X88, 0XD7, 0X6D }, /* -17.5db */ + { 0X09, 0X0A, 0X4D, 0X2F }, /* -17.0db */ + { 0X09, 0X93, 0X6E, 0XB8 }, /* -16.5db */ + { 0X0A, 0X24, 0XB0, 0X62 }, /* -16.0db */ + { 0X0A, 0XBE, 0X8D, 0X70 }, /* -15.5db */ + { 0X0B, 0X61, 0X88, 0X71 }, /* -15.0db */ + { 0X0C, 0X0E, 0X2B, 0XB0 }, /* -14.5db */ + { 0X0C, 0XC5, 0X09, 0XAB }, /* -14.0db */ + { 0X0D, 0X86, 0XBD, 0X8D }, /* -13.5db */ + { 0X0E, 0X53, 0XEB, 0XB3 }, /* -13.0db */ + { 0X0F, 0X2D, 0X42, 0X38 }, /* -12.5db */ + { 0X10, 0X13, 0X79, 0X87 }, /* -12.0db */ + { 0X11, 0X07, 0X54, 0XF9 }, /* -11.5db */ + { 0X12, 0X09, 0XA3, 0X7A }, /* -11.0db */ + { 0X13, 0X1B, 0X40, 0X39 }, /* -10.5db */ + { 0X14, 0X3D, 0X13, 0X62 }, /* -10.0db */ + { 0X15, 0X70, 0X12, 0XE1 }, /* -9.5db */ + { 0X16, 0XB5, 0X43, 0X37 }, /* -9.0db */ + { 0X18, 0X0D, 0XB8, 0X54 }, /* -8.5db */ + { 0X19, 0X7A, 0X96, 0X7F }, /* -8.0db */ + { 0X1A, 0XFD, 0X13, 0X54 }, /* -7.5db */ + { 0X1C, 0X96, 0X76, 0XC6 }, /* -7.0db */ + { 0X1E, 0X48, 0X1C, 0X37 }, /* -6.5db */ + { 0X20, 0X13, 0X73, 0X9E }, /* -6.0db */ + { 0X21, 0XFA, 0X02, 0XBF }, /* -5.5db */ + { 0X23, 0XFD, 0X66, 0X78 }, /* -5.0db */ + { 0X26, 0X1F, 0X54, 0X1C }, /* -4.5db */ + { 0X28, 0X61, 0X9A, 0XE9 }, /* -4.0db */ + { 0X2A, 0XC6, 0X25, 0X91 }, /* -3.5db */ + { 0X2D, 0X4E, 0XFB, 0XD5 }, /* -3.0db */ + { 0X2F, 0XFE, 0X44, 0X48 }, /* -2.5db */ + { 0X32, 0XD6, 0X46, 0X17 }, /* -2.0db */ + { 0X35, 0XD9, 0X6B, 0X02 }, /* -1.5db */ + { 0X39, 0X0A, 0X41, 0X5F }, /* -1.0db */ + { 0X3C, 0X6B, 0X7E, 0X4F }, /* -0.5db */ + { 0X40, 0X00, 0X00, 0X00 }, /* 0.0db */ + { 0X43, 0XCA, 0XD0, 0X22 }, /* 0.5db */ + { 0X47, 0XCF, 0X26, 0X7D }, /* 1.0db */ + { 0X4C, 0X10, 0X6B, 0XA5 }, /* 1.5db */ + { 0X50, 0X92, 0X3B, 0XE3 }, /* 2.0db */ + { 0X55, 0X58, 0X6A, 0X46 }, /* 2.5db */ + { 0X5A, 0X67, 0X03, 0XDF }, /* 3.0db */ + { 0X5F, 0XC2, 0X53, 0X32 }, /* 3.5db */ + { 0X65, 0X6E, 0XE3, 0XDB }, /* 4.0db */ + { 0X6B, 0X71, 0X86, 0X68 }, /* 4.5db */ + { 0X71, 0XCF, 0X54, 0X71 }, /* 5.0db */ + { 0X78, 0X8D, 0XB4, 0XE9 }, /* 5.5db */ + { 0XFF, 0XFF, 0XFF, 0XFF }, /* 6.0db */ +}; #endif diff --git a/include/sound/tas2781.h b/include/sound/tas2781.h index cd8ce522b78e..3275575f5bfb 100644 --- a/include/sound/tas2781.h +++ b/include/sound/tas2781.h @@ -2,7 +2,7 @@ // // ALSA SoC Texas Instruments TAS2563/TAS2781 Audio Smart Amplifier // -// Copyright (C) 2022 - 2023 Texas Instruments Incorporated +// Copyright (C) 2022 - 2024 Texas Instruments Incorporated // https://www.ti.com // // The TAS2563/TAS2781 driver implements a flexible and configurable @@ -50,6 +50,7 @@ #define TASDEVICE_I2CChecksum TASDEVICE_REG(0x0, 0x0, 0x7E) /* Volume control */ +#define TAS2563_DVC_LVL TASDEVICE_REG(0x00, 0x02, 0x0C) #define TAS2781_DVC_LVL TASDEVICE_REG(0x0, 0x0, 0x1A) #define TAS2781_AMP_LEVEL TASDEVICE_REG(0x0, 0x0, 0x03) #define TAS2781_AMP_LEVEL_MASK GENMASK(5, 1) diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c index 4d1a0d836e77..4960ab6577f7 100644 --- a/sound/soc/codecs/tas2781-i2c.c +++ b/sound/soc/codecs/tas2781-i2c.c @@ -30,6 +30,7 @@ #include <sound/tas2781.h> #include <sound/tlv.h> #include <sound/tas2781-tlv.h> +#include <asm/unaligned.h> static const struct i2c_device_id tasdevice_id[] = { { "tas2563", TAS2563 }, @@ -103,7 +104,7 @@ static int tas2781_amp_putvol(struct snd_kcontrol *kcontrol, return tasdevice_amp_putvol(tas_priv, ucontrol, mc); } -static int tas2781_force_fwload_get(struct snd_kcontrol *kcontrol, +static int tasdev_force_fwload_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_soc_component *component = @@ -118,7 +119,7 @@ static int tas2781_force_fwload_get(struct snd_kcontrol *kcontrol, return 0; } -static int tas2781_force_fwload_put(struct snd_kcontrol *kcontrol, +static int tasdev_force_fwload_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_soc_component *component = @@ -127,18 +128,114 @@ static int tas2781_force_fwload_put(struct snd_kcontrol *kcontrol, snd_soc_component_get_drvdata(component); bool change, val = (bool)ucontrol->value.integer.value[0]; + mutex_lock(&tas_priv->codec_lock); if (tas_priv->force_fwload_status == val) change = false; else { change = true; tas_priv->force_fwload_status = val; } + mutex_unlock(&tas_priv->codec_lock); dev_dbg(tas_priv->dev, "%s : Force FWload %s\n", __func__, tas_priv->force_fwload_status ? "ON" : "OFF"); return change; } +static int tas2563_digital_gain_get( + struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + unsigned int l = 0, r = mc->max; + unsigned int target, ar_mid, mid, ar_l, ar_r; + unsigned int reg = mc->reg; + unsigned char data[4]; + int ret; + + mutex_lock(&tas_dev->codec_lock); + /* Read the primary device */ + ret = tasdevice_dev_bulk_read(tas_dev, 0, reg, data, 4); + if (ret) { + dev_err(tas_dev->dev, "%s, get AMP vol error\n", __func__); + goto out; + } + + target = get_unaligned_be32(&data[0]); + + while (r > 1 + l) { + mid = (l + r) / 2; + ar_mid = get_unaligned_be32(tas2563_dvc_table[mid]); + if (target < ar_mid) + r = mid; + else + l = mid; + } + + ar_l = get_unaligned_be32(tas2563_dvc_table[l]); + ar_r = get_unaligned_be32(tas2563_dvc_table[r]); + + /* find out the member same as or closer to the current volume */ + ucontrol->value.integer.value[0] = + abs(target - ar_l) <= abs(target - ar_r) ? l : r; +out: + mutex_unlock(&tas_dev->codec_lock); + return 0; +} + +static int tas2563_digital_gain_put( + struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + unsigned int reg = mc->reg; + unsigned int volrd, volwr; + int vol = ucontrol->value.integer.value[0]; + int max = mc->max, i, ret = 1; + unsigned char data[4]; + + vol = clamp(vol, 0, max); + mutex_lock(&tas_dev->codec_lock); + /* Read the primary device */ + ret = tasdevice_dev_bulk_read(tas_dev, 0, reg, data, 4); + if (ret) { + dev_err(tas_dev->dev, "%s, get AMP vol error\n", __func__); + goto out; + } + + volrd = get_unaligned_be32(&data[0]); + volwr = get_unaligned_be32(tas2563_dvc_table[vol]); + + if (volrd == volwr) { + ret = 0; + goto out; + } + + for (i = 0; i < tas_dev->ndev; i++) { + ret = tasdevice_dev_bulk_write(tas_dev, i, reg, + (unsigned char *)tas2563_dvc_table[vol], 4); + if (ret) + dev_err(tas_dev->dev, + "%s, set digital vol error in device %d\n", + __func__, i); + } + +out: + mutex_unlock(&tas_dev->codec_lock); + return ret; +} + +static const struct snd_kcontrol_new tasdevice_snd_controls[] = { + SOC_SINGLE_BOOL_EXT("Speaker Force Firmware Load", 0, + tasdev_force_fwload_get, tasdev_force_fwload_put), +}; + static const struct snd_kcontrol_new tas2781_snd_controls[] = { SOC_SINGLE_RANGE_EXT_TLV("Speaker Analog Gain", TAS2781_AMP_LEVEL, 1, 0, 20, 0, tas2781_amp_getvol, @@ -146,8 +243,13 @@ static const struct snd_kcontrol_new tas2781_snd_controls[] = { SOC_SINGLE_RANGE_EXT_TLV("Speaker Digital Gain", TAS2781_DVC_LVL, 0, 0, 200, 1, tas2781_digital_getvol, tas2781_digital_putvol, dvc_tlv), - SOC_SINGLE_BOOL_EXT("Speaker Force Firmware Load", 0, - tas2781_force_fwload_get, tas2781_force_fwload_put), +}; + +static const struct snd_kcontrol_new tas2563_snd_controls[] = { + SOC_SINGLE_RANGE_EXT_TLV("Speaker Digital Gain", TAS2563_DVC_LVL, 0, + 0, ARRAY_SIZE(tas2563_dvc_table) - 1, 0, + tas2563_digital_gain_get, tas2563_digital_gain_put, + tas2563_dvc_tlv), }; static int tasdevice_set_profile_id(struct snd_kcontrol *kcontrol, @@ -578,6 +680,27 @@ static struct snd_soc_dai_driver tasdevice_dai_driver[] = { static int tasdevice_codec_probe(struct snd_soc_component *codec) { struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(codec); + int rc; + + if (tas_priv->chip_id == TAS2781) { + rc = snd_soc_add_component_controls(codec, + tas2781_snd_controls, + ARRAY_SIZE(tas2781_snd_controls)); + if (rc < 0) { + dev_err(tas_priv->dev, "%s: Add control err rc = %d", + __func__, rc); + return rc; + } + } else { + rc = snd_soc_add_component_controls(codec, + tas2563_snd_controls, + ARRAY_SIZE(tas2563_snd_controls)); + if (rc < 0) { + dev_err(tas_priv->dev, "%s: Add control err rc = %d", + __func__, rc); + return rc; + } + } tas_priv->name_prefix = codec->name_prefix; return tascodec_init(tas_priv, codec, THIS_MODULE, tasdevice_fw_ready); @@ -605,8 +728,8 @@ static const struct snd_soc_component_driver soc_codec_driver_tasdevice = { .probe = tasdevice_codec_probe, .remove = tasdevice_codec_remove, - .controls = tas2781_snd_controls, - .num_controls = ARRAY_SIZE(tas2781_snd_controls), + .controls = tasdevice_snd_controls, + .num_controls = ARRAY_SIZE(tasdevice_snd_controls), .dapm_widgets = tasdevice_dapm_widgets, .num_dapm_widgets = ARRAY_SIZE(tasdevice_dapm_widgets), .dapm_routes = tasdevice_audio_map, -- 2.34.1

4 3

[PATCH AUTOSEL 5.10 02/11] ASoC: Intel: sof_sdw: Add quirks for some new Dell laptops
by Sasha Levin 10 Aug '24

10 Aug '24

From: Charles Keepax <ckeepax(a)opensource.cirrus.com> [ Upstream commit 91cdecaba791c74df6da0650e797fe1192cf2700 ] Add quirks for some new Dell laptops using Cirrus amplifiers in a bridge configuration. Reviewed-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Signed-off-by: Charles Keepax <ckeepax(a)opensource.cirrus.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Link: https://msgid.link/r/20240527193552.165567-11-pierre-louis.bossart@linux.in… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/intel/boards/sof_sdw.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/sound/soc/intel/boards/sof_sdw.c b/sound/soc/intel/boards/sof_sdw.c index 25bf73a7e7bfa..ad3694d36d969 100644 --- a/sound/soc/intel/boards/sof_sdw.c +++ b/sound/soc/intel/boards/sof_sdw.c @@ -234,6 +234,22 @@ static const struct dmi_system_id sof_sdw_quirk_table[] = { }, .driver_data = (void *)(RT711_JD2_100K), }, + { + .callback = sof_sdw_quirk_cb, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"), + DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "0CE3") + }, + .driver_data = (void *)(SOF_SIDECAR_AMPS), + }, + { + .callback = sof_sdw_quirk_cb, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"), + DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "0CE4") + }, + .driver_data = (void *)(SOF_SIDECAR_AMPS), + }, {} }; -- 2.43.0

2 2

[PATCH 0/3] ALSA: update sample rate definition for eARC
by Jerome Brunet 10 Aug '24

10 Aug '24

This patchset updates some sample rate definition for eARC support. Notably it: * adds the definition for 128kHz * update the ASoC spdif codecs to include all supported rates, up to 768kHz * adds missing IEC958 definition for 128k, 352.4k, 384k and 705.6kHz On that last point, as noted in the related commit description, I'd like to stress that I have found the definitions using a testing equipement. I do not have access to the IEC958 specification. It would be best if someone with access to this specification could review/ack patch #2, before applying it. Jerome Brunet (3): ALSA: pcm: add support for 128kHz sample rate ALSA: IEC958 definition for consumer status channel update ASoC: spdif: extend supported rates to 768kHz include/sound/asoundef.h | 6 +++++- include/sound/pcm.h | 13 +++++++------ sound/core/pcm_native.c | 6 +++--- sound/soc/codecs/spdif_receiver.c | 3 ++- sound/soc/codecs/spdif_transmitter.c | 3 ++- 5 files changed, 19 insertions(+), 12 deletions(-) -- 2.43.0

5 15

[PATCH v1] ASoc: tas2781: Add Calibration Kcontrols and tas2563 digtial gain for Chromebook
by Shenghao Ding 09 Aug '24

09 Aug '24

Calibrated data will be set to default after loading DSP config params, which will cause speaker protection work abnormally. Reload calibrated data after loading DSP config params. Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- v1: - Changed the copyright year to 2024 in the related files. - Add CAL_DAT_SZ for calibrated data size. - Add TAS2563_DVC_LVL for digtial gain kcontrol. - Add registers for TAS2563 and TAS2781 calibration. - Add cali_data_restore for regsiter restore after calibration. - Add is_user_space_calidata to store the flag where the calibrated from, user space or bin file from driver parsing. - Add TASDEVICE_RCA_FW_OK to support only register setting bin in the device. - Add tas2563_dvc_table for relationship between tas2563 digtial gains and register values. - Correct the filename in the header comments of tas2781-comlib.c, tas2781-lib.c --> tas2781-comlib.c. - tasdevice_chn_switch for chip switch among multiple chips(tas2563 or tas2781) - Add loading the calibrated values from user space in tasdev_load_calibrated_data - Correct no dsp no work, it can still work in bypass mode. - Add calibrated register setting for tas2563&tas2781. - Add mutex into each kcontrol. - rename tas2781_force_fwload_get, tas2781_force_fwload_put--> tasdev_force_fwload_get, tasdev_force_fwload_put - rename tas2781_codec --> tasdev_codec - define tas2781_snd_control and tas2563_snd_control for volume - define tas2781_cali_control and tas2563_cali_control for calibration --- include/sound/tas2781-dsp.h | 1 + include/sound/tas2781.h | 92 ++- sound/soc/codecs/tas2781-comlib.c | 35 +- sound/soc/codecs/tas2781-fmwlib.c | 51 +- sound/soc/codecs/tas2781-i2c.c | 941 +++++++++++++++++++++++++++++- 5 files changed, 1061 insertions(+), 59 deletions(-) diff --git a/include/sound/tas2781-dsp.h b/include/sound/tas2781-dsp.h index 7fba7ea26a4b..74ab6f113029 100644 --- a/include/sound/tas2781-dsp.h +++ b/include/sound/tas2781-dsp.h @@ -121,6 +121,7 @@ enum tasdevice_dsp_fw_state { TASDEVICE_DSP_FW_NONE = 0, TASDEVICE_DSP_FW_PENDING, TASDEVICE_DSP_FW_FAIL, + TASDEVICE_RCA_FW_OK, TASDEVICE_DSP_FW_ALL_OK, }; diff --git a/include/sound/tas2781.h b/include/sound/tas2781.h index 99ca3e401fd1..2fb3d03d0040 100644 --- a/include/sound/tas2781.h +++ b/include/sound/tas2781.h @@ -2,7 +2,7 @@ // // ALSA SoC Texas Instruments TAS2563/TAS2781 Audio Smart Amplifier // -// Copyright (C) 2022 - 2023 Texas Instruments Incorporated +// Copyright (C) 2022 - 2024 Texas Instruments Incorporated // https://www.ti.com // // The TAS2563/TAS2781 driver implements a flexible and configurable @@ -23,6 +23,8 @@ #define SMARTAMP_MODULE_NAME "tas2781" #define TAS2781_GLOBAL_ADDR 0x40 #define TAS2563_GLOBAL_ADDR 0x48 +#define CAL_DAT_SZ 20 + #define TASDEVICE_RATES (SNDRV_PCM_RATE_44100 |\ SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000 |\ SNDRV_PCM_RATE_88200) @@ -31,6 +33,11 @@ SNDRV_PCM_FMTBIT_S24_LE | \ SNDRV_PCM_FMTBIT_S32_LE) +#define TASDEVICE_CMD_SING_W 0x1 +#define TASDEVICE_CMD_BURST 0x2 +#define TASDEVICE_CMD_DELAY 0x3 +#define TASDEVICE_CMD_FIELD_W 0x4 + /*PAGE Control Register (available in page0 of each book) */ #define TASDEVICE_PAGE_SELECT 0x00 #define TASDEVICE_BOOKCTL_PAGE 0x00 @@ -43,21 +50,73 @@ (page * 128)) + reg) /*Software Reset */ -#define TAS2781_REG_SWRESET TASDEVICE_REG(0x0, 0X0, 0x01) -#define TAS2781_REG_SWRESET_RESET BIT(0) +#define TASDEVICE_REG_SWRESET TASDEVICE_REG(0x00, 0X00, 0x01) +#define TASDEVICE_REG_SWRESET_RESET BIT(0) /*I2C Checksum */ -#define TASDEVICE_I2CChecksum TASDEVICE_REG(0x0, 0x0, 0x7E) +#define TASDEVICE_I2CChecksum TASDEVICE_REG(0x00, 0x00, 0x7E) + +/* XM_340 */ +#define TASDEVICE_XM_A1_REG TASDEVICE_REG(0x64, 0x02, 0x4c) +/* XM_341 */ +#define TASDEVICE_XM_A2_REG TASDEVICE_REG(0x64, 0x02, 0x64) /* Volume control */ -#define TAS2781_DVC_LVL TASDEVICE_REG(0x0, 0x0, 0x1A) -#define TAS2781_AMP_LEVEL TASDEVICE_REG(0x0, 0x0, 0x03) +#define TAS2563_DVC_LVL TASDEVICE_REG(0x00, 0x02, 0x0C) +#define TAS2781_DVC_LVL TASDEVICE_REG(0x00, 0x00, 0x1A) +#define TAS2781_AMP_LEVEL TASDEVICE_REG(0x00, 0x00, 0x03) #define TAS2781_AMP_LEVEL_MASK GENMASK(5, 1) -#define TASDEVICE_CMD_SING_W 0x1 -#define TASDEVICE_CMD_BURST 0x2 -#define TASDEVICE_CMD_DELAY 0x3 -#define TASDEVICE_CMD_FIELD_W 0x4 +#define TAS2563_PRM_R0_REG TASDEVICE_REG(0x00, 0x0f, 0x34) +#define TAS2563_PRM_R0_LOW_REG TASDEVICE_REG(0x00, 0x0f, 0x48) +#define TAS2563_PRM_INVR0_REG TASDEVICE_REG(0x00, 0x0f, 0x40) +#define TAS2563_PRM_POW_REG TASDEVICE_REG(0x00, 0x0d, 0x3c) +#define TAS2563_PRM_TLIMIT_REG TASDEVICE_REG(0x00, 0x10, 0x14) + +#define TAS2563_RUNTIME_RE_REG_TF TASDEVICE_REG(0x64, 0x02, 0x70) +#define TAS2563_RUNTIME_RE_REG TASDEVICE_REG(0x64, 0x02, 0x48) + +#define TAS2563_PRM_ENFF_REG TASDEVICE_REG(0x00, 0x0d, 0x54) +#define TAS2563_PRM_DISTCK_REG TASDEVICE_REG(0x00, 0x0d, 0x58) +#define TAS2563_PRM_TE_SCTHR_REG TASDEVICE_REG(0x00, 0x0f, 0x60) +#define TAS2563_PRM_PLT_FLAG_REG TASDEVICE_REG(0x00, 0x0d, 0x74) +#define TAS2563_PRM_SINEGAIN_REG TASDEVICE_REG(0x00, 0x0d, 0x7c) +/* prm_Int_B0 */ +#define TAS2563_TE_TA1_REG TASDEVICE_REG(0x00, 0x10, 0x0c) +/* prm_Int_A1 */ +#define TAS2563_TE_TA1_AT_REG TASDEVICE_REG(0x00, 0x10, 0x10) +/* prm_TE_Beta */ +#define TAS2563_TE_TA2_REG TASDEVICE_REG(0x00, 0x0f, 0x64) +/* prm_TE_Beta1 */ +#define TAS2563_TE_AT_REG TASDEVICE_REG(0x00, 0x0f, 0x68) +/* prm_TE_1_Beta1 */ +#define TAS2563_TE_DT_REG TASDEVICE_REG(0x00, 0x0f, 0x70) + +#define TAS2781_PRM_R0_REG TASDEVICE_REG(0x00, 0x17, 0x74) +#define TAS2781_PRM_R0_LOW_REG TASDEVICE_REG(0x00, 0x18, 0x0c) +#define TAS2781_PRM_INVR0_REG TASDEVICE_REG(0x00, 0x18, 0x14) +#define TAS2781_PRM_POW_REG TASDEVICE_REG(0x00, 0x13, 0x70) +#define TAS2781_PRM_TLIMIT_REG TASDEVICE_REG(0x00, 0x18, 0x7c) + +#define TAS2781_PRM_INT_MASK_REG TASDEVICE_REG(0x00, 0x00, 0x3b) +#define TAS2781_PRM_CLK_CFG_REG TASDEVICE_REG(0x00, 0x00, 0x5c) +#define TAS2781_PRM_RSVD_REG TASDEVICE_REG(0x00, 0x01, 0x19) +#define TAS2781_PRM_TEST_57_REG TASDEVICE_REG(0x00, 0xfd, 0x39) +#define TAS2781_PRM_TEST_62_REG TASDEVICE_REG(0x00, 0xfd, 0x3e) +#define TAS2781_PRM_PVDD_UVLO_REG TASDEVICE_REG(0x00, 0x00, 0x71) +#define TAS2781_PRM_CHNL_0_REG TASDEVICE_REG(0x00, 0x00, 0x03) +#define TAS2781_PRM_NG_CFG0_REG TASDEVICE_REG(0x00, 0x00, 0x35) +#define TAS2781_PRM_IDLE_CH_DET_REG TASDEVICE_REG(0x00, 0x00, 0x66) +#define TAS2781_PRM_PLT_FLAG_REG TASDEVICE_REG(0x00, 0x14, 0x38) +#define TAS2781_PRM_SINEGAIN_REG TASDEVICE_REG(0x00, 0x14, 0x40) +#define TAS2781_PRM_SINEGAIN2_REG TASDEVICE_REG(0x00, 0x14, 0x44) + +#define TAS2781_TEST_UNLOCK_REG TASDEVICE_REG(0x00, 0xFD, 0x0D) +#define TAS2781_TEST_PAGE_UNLOCK 0x0D + +#define TAS2781_RUNTIME_LATCH_RE_REG TASDEVICE_REG(0x00, 0x00, 0x49) +#define TAS2781_RUNTIME_RE_REG_TF TASDEVICE_REG(0x64, 0x62, 0x48) +#define TAS2781_RUNTIME_RE_REG TASDEVICE_REG(0x64, 0x63, 0x44) enum audio_device { TAS2563, @@ -69,7 +128,15 @@ enum device_catlog_id { OTHERS }; +struct bulk_reg_val { + int reg; + unsigned char val[4]; + unsigned char val_len; + bool is_locked; +}; + struct tasdevice { + struct bulk_reg_val *cali_data_restore; struct tasdevice_fw *cali_data_fmw; unsigned int dev_addr; unsigned int err_code; @@ -88,6 +155,8 @@ struct tasdevice_irqinfo { struct calidata { unsigned char *data; unsigned long total_sz; + unsigned int *reg_array; + unsigned int reg_array_sz; }; struct tasdevice_priv { @@ -122,6 +191,7 @@ struct tasdevice_priv { bool force_fwload_status; bool playback_started; bool isacpi; + bool is_user_space_calidata; unsigned int global_addr; int (*fw_parse_variable_header)(struct tasdevice_priv *tas_priv, @@ -148,6 +218,8 @@ int tasdevice_init(struct tasdevice_priv *tas_priv); void tasdevice_remove(struct tasdevice_priv *tas_priv); int tasdevice_save_calibration(struct tasdevice_priv *tas_priv); void tasdevice_apply_calibration(struct tasdevice_priv *tas_priv); +int tasdevice_chn_switch(struct tasdevice_priv *tas_priv, + unsigned short chn); int tasdevice_dev_read(struct tasdevice_priv *tas_priv, unsigned short chn, unsigned int reg, unsigned int *value); int tasdevice_dev_write(struct tasdevice_priv *tas_priv, diff --git a/sound/soc/codecs/tas2781-comlib.c b/sound/soc/codecs/tas2781-comlib.c index 3aa81514dad7..9d7b56663b6b 100644 --- a/sound/soc/codecs/tas2781-comlib.c +++ b/sound/soc/codecs/tas2781-comlib.c @@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 // -// tas2781-lib.c -- TAS2781 Common functions for HDA and ASoC Audio drivers +// tas2781-comlib.c -- TAS2781 Common functions for HDA and ASoC Audio drivers // -// Copyright 2023 Texas Instruments, Inc. +// Copyright 2023 - 2024 Texas Instruments, Inc. // // Author: Shenghao Ding <shenghao-ding(a)ti.com> @@ -89,6 +89,33 @@ static int tasdevice_change_chn_book(struct tasdevice_priv *tas_priv, return ret; } +int tasdevice_chn_switch(struct tasdevice_priv *tas_priv, + unsigned short chn) +{ + struct i2c_client *client = (struct i2c_client *)tas_priv->client; + struct tasdevice *tasdev = &tas_priv->tasdevice[chn]; + struct regmap *map = tas_priv->regmap; + int ret; + + if (client->addr != tasdev->dev_addr) { + client->addr = tasdev->dev_addr; + /* All devices share the same regmap, clear the page + * inside regmap once switching to another device. + * Register 0 at any pages and any books inside tas2781 + * is the same one for page-switching. + */ + ret = regmap_write(map, TASDEVICE_PAGE_SELECT, 0); + if (ret < 0) { + dev_err(tas_priv->dev, "%s, E=%d\n", + __func__, ret); + return ret; + } + return 1; + } + return 0; +} +EXPORT_SYMBOL_GPL(tasdevice_chn_switch); + int tasdevice_dev_read(struct tasdevice_priv *tas_priv, unsigned short chn, unsigned int reg, unsigned int *val) { @@ -254,8 +281,8 @@ void tas2781_reset(struct tasdevice_priv *tas_dev) } else { for (i = 0; i < tas_dev->ndev; i++) { ret = tasdevice_dev_write(tas_dev, i, - TAS2781_REG_SWRESET, - TAS2781_REG_SWRESET_RESET); + TASDEVICE_REG_SWRESET, + TASDEVICE_REG_SWRESET_RESET); if (ret < 0) dev_err(tas_dev->dev, "dev %d swreset fail, %d\n", diff --git a/sound/soc/codecs/tas2781-fmwlib.c b/sound/soc/codecs/tas2781-fmwlib.c index 265a8ca25cbb..19a5133083dc 100644 --- a/sound/soc/codecs/tas2781-fmwlib.c +++ b/sound/soc/codecs/tas2781-fmwlib.c @@ -2153,20 +2153,39 @@ static int tasdevice_load_data(struct tasdevice_priv *tas_priv, static void tasdev_load_calibrated_data(struct tasdevice_priv *priv, int i) { + struct tasdevice_fw *cal_fmw = priv->tasdevice[i].cali_data_fmw; + struct calidata *cali_data = &priv->cali_data; + unsigned char *data = cali_data->data; struct tasdevice_calibration *cal; - struct tasdevice_fw *cal_fmw; + int k = i * (CAL_DAT_SZ + 1); + int j, rc; - cal_fmw = priv->tasdevice[i].cali_data_fmw; + if (!priv->is_user_space_calidata && + cal_fmw) { + cal = cal_fmw->calibrations; - /* No calibrated data for current devices, playback will go ahead. */ - if (!cal_fmw) + if (cal) + load_calib_data(priv, &cal->dev_data); return; - - cal = cal_fmw->calibrations; - if (cal) + } + if (!priv->is_user_space_calidata) return; - - load_calib_data(priv, &cal->dev_data); + /* load calibrated data from user space */ + if (data[k] != i) { + dev_err(priv->dev, "%s: no cal-data for dev %d from usr-spc\n", + __func__, i); + return; + } + for (j = 0; j < cali_data->reg_array_sz; j++) { + if (data[k] != j) + rc = tasdevice_dev_bulk_write(priv, i, + cali_data->reg_array[j], + &(data[k + 4 * j]), 4); + if (rc < 0) + dev_err(priv->dev, + "chn %d calib %d bulk_wr err = %d\n", + i, j, rc); + } } int tasdevice_select_tuningprm_cfg(void *context, int prm_no, @@ -2261,9 +2280,10 @@ int tasdevice_select_tuningprm_cfg(void *context, int prm_no, tas_priv->tasdevice[i].cur_conf = cfg_no; } } - } else + } else { dev_dbg(tas_priv->dev, "%s: Unneeded loading dsp conf %d\n", __func__, cfg_no); + } status |= cfg_info[rca_conf_no]->active_dev; @@ -2324,13 +2344,15 @@ void tasdevice_tuning_switch(void *context, int state) struct tasdevice_fw *tas_fmw = tas_priv->fmw; int profile_cfg_id = tas_priv->rcabin.profile_cfg_id; - if (tas_priv->fw_state == TASDEVICE_DSP_FW_FAIL) { - dev_err(tas_priv->dev, "DSP bin file not loaded\n"); + /* Only RCA file loaded still can work without speaker protection */ + if (!(tas_priv->fw_state == TASDEVICE_RCA_FW_OK || + tas_priv->fw_state == TASDEVICE_DSP_FW_ALL_OK)) { + dev_err(tas_priv->dev, "No firmware loaded\n"); return; } if (state == 0) { - if (tas_priv->cur_prog < tas_fmw->nr_programs) { + if (tas_fmw && tas_priv->cur_prog < tas_fmw->nr_programs) { /*dsp mode or tuning mode*/ profile_cfg_id = tas_priv->rcabin.profile_cfg_id; tasdevice_select_tuningprm_cfg(tas_priv, @@ -2340,9 +2362,10 @@ void tasdevice_tuning_switch(void *context, int state) tasdevice_select_cfg_blk(tas_priv, profile_cfg_id, TASDEVICE_BIN_BLK_PRE_POWER_UP); - } else + } else { tasdevice_select_cfg_blk(tas_priv, profile_cfg_id, TASDEVICE_BIN_BLK_PRE_SHUTDOWN); + } } EXPORT_SYMBOL_NS_GPL(tasdevice_tuning_switch, SND_SOC_TAS2781_FMWLIB); diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c index 9350972dfefe..239f3538c558 100644 --- a/sound/soc/codecs/tas2781-i2c.c +++ b/sound/soc/codecs/tas2781-i2c.c @@ -13,6 +13,7 @@ // Author: Kevin Lu <kevin-lu(a)ti.com> // +#include <asm/unaligned.h> #include <linux/crc8.h> #include <linux/firmware.h> #include <linux/gpio/consumer.h> @@ -31,6 +32,122 @@ #include <sound/tlv.h> #include <sound/tas2781-tlv.h> +static const struct bulk_reg_val tas2563_cali_start_reg[] = { + { + .reg = TAS2563_PRM_ENFF_REG, + .val = { 0x40, 0x00, 0x00, 0x00 }, + }, + { + .reg = TAS2563_PRM_DISTCK_REG, + .val = { 0x40, 0x00, 0x00, 0x00 }, + }, + { + .reg = TAS2563_PRM_TE_SCTHR_REG, + .val = { 0x7f, 0xff, 0xff, 0xff }, + }, + { + .reg = TAS2563_PRM_PLT_FLAG_REG, + .val = { 0x40, 0x00, 0x00, 0x00 }, + }, + { + .reg = TAS2563_PRM_SINEGAIN_REG, + .val = { 0x0a, 0x3d, 0x70, 0xa4 }, + }, + { + .reg = TAS2563_TE_TA1_REG, + .val = { 0x00, 0x36, 0x91, 0x5e }, + }, + { + .reg = TAS2563_TE_TA1_AT_REG, + .val = { 0x00, 0x36, 0x91, 0x5e }, + }, + { + .reg = TAS2563_TE_TA2_REG, + .val = { 0x00, 0x06, 0xd3, 0x72 }, + }, + { + .reg = TAS2563_TE_AT_REG, + .val = { 0x00, 0x36, 0x91, 0x5e }, + }, + { + .reg = TAS2563_TE_DT_REG, + .val = { 0x00, 0x36, 0x91, 0x5e }, + }, +}; + +static const struct bulk_reg_val tas2781_cali_start_reg[] = { + { + .reg = TAS2781_PRM_INT_MASK_REG, + .val = { 0xfe }, + .val_len = 1, + .is_locked = false + }, + { + .reg = TAS2781_PRM_CLK_CFG_REG, + .val = { 0xdd }, + .val_len = 1, + .is_locked = false + }, + { + .reg = TAS2781_PRM_RSVD_REG, + .val = { 0x20 }, + .val_len = 1, + .is_locked = false + }, + { + .reg = TAS2781_PRM_TEST_57_REG, + .val = { 0x14 }, + .val_len = 1, + .is_locked = true + }, + { + .reg = TAS2781_PRM_TEST_62_REG, + .val = { 0x45 }, + .val_len = 1, + .is_locked = true + }, + { + .reg = TAS2781_PRM_PVDD_UVLO_REG, + .val = { 0x03 }, + .val_len = 1, + .is_locked = false + }, + { + .reg = TAS2781_PRM_CHNL_0_REG, + .val = { 0xA8 }, + .val_len = 1, + .is_locked = false + }, + { + .reg = TAS2781_PRM_NG_CFG0_REG, + .val = { 0xb9 }, + .val_len = 1, + .is_locked = false + }, + { + .reg = TAS2781_PRM_IDLE_CH_DET_REG, + .val = { 0x92 }, + .val_len = 1, + .is_locked = false + }, + { + .reg = TAS2781_PRM_PLT_FLAG_REG, + .val = { 0x40, 0x00, 0x00, 0x00 }, + .val_len = 4, + .is_locked = false + }, + { + .reg = TAS2781_PRM_SINEGAIN_REG, + .val_len = 4, + .is_locked = false + }, + { + .reg = TAS2781_PRM_SINEGAIN2_REG, + .val_len = 4, + .is_locked = false + }, +}; + static const struct i2c_device_id tasdevice_id[] = { { "tas2563", TAS2563 }, { "tas2781", TAS2781 }, @@ -47,6 +164,22 @@ static const struct of_device_id tasdevice_of_match[] = { MODULE_DEVICE_TABLE(of, tasdevice_of_match); #endif +static const int tas2563_cali_data_reg[] = { + TAS2563_PRM_R0_REG, + TAS2563_PRM_R0_LOW_REG, + TAS2563_PRM_INVR0_REG, + TAS2563_PRM_POW_REG, + TAS2563_PRM_TLIMIT_REG, +}; + +static const int tas2781_cali_data_reg[] = { + TAS2781_PRM_R0_REG, + TAS2781_PRM_R0_LOW_REG, + TAS2781_PRM_INVR0_REG, + TAS2781_PRM_POW_REG, + TAS2781_PRM_TLIMIT_REG, +}; + /** * tas2781_digital_getvol - get the volum control * @kcontrol: control pointer @@ -65,8 +198,13 @@ static int tas2781_digital_getvol(struct snd_kcontrol *kcontrol, struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(codec); struct soc_mixer_control *mc = (struct soc_mixer_control *)kcontrol->private_value; + int rc; + + mutex_lock(&tas_priv->codec_lock); + rc = tasdevice_digital_getvol(tas_priv, ucontrol, mc); + mutex_unlock(&tas_priv->codec_lock); - return tasdevice_digital_getvol(tas_priv, ucontrol, mc); + return rc; } static int tas2781_digital_putvol(struct snd_kcontrol *kcontrol, @@ -76,8 +214,13 @@ static int tas2781_digital_putvol(struct snd_kcontrol *kcontrol, struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(codec); struct soc_mixer_control *mc = (struct soc_mixer_control *)kcontrol->private_value; + int rc; + + mutex_lock(&tas_priv->codec_lock); + rc = tasdevice_digital_putvol(tas_priv, ucontrol, mc); + mutex_unlock(&tas_priv->codec_lock); - return tasdevice_digital_putvol(tas_priv, ucontrol, mc); + return rc; } static int tas2781_amp_getvol(struct snd_kcontrol *kcontrol, @@ -87,8 +230,13 @@ static int tas2781_amp_getvol(struct snd_kcontrol *kcontrol, struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(codec); struct soc_mixer_control *mc = (struct soc_mixer_control *)kcontrol->private_value; + int rc; + + mutex_lock(&tas_priv->codec_lock); + rc = tasdevice_amp_getvol(tas_priv, ucontrol, mc); + mutex_unlock(&tas_priv->codec_lock); - return tasdevice_amp_getvol(tas_priv, ucontrol, mc); + return rc; } static int tas2781_amp_putvol(struct snd_kcontrol *kcontrol, @@ -99,11 +247,16 @@ static int tas2781_amp_putvol(struct snd_kcontrol *kcontrol, snd_soc_component_get_drvdata(codec); struct soc_mixer_control *mc = (struct soc_mixer_control *)kcontrol->private_value; + int rc; + + mutex_lock(&tas_priv->codec_lock); + rc = tasdevice_amp_putvol(tas_priv, ucontrol, mc); + mutex_unlock(&tas_priv->codec_lock); - return tasdevice_amp_putvol(tas_priv, ucontrol, mc); + return rc; } -static int tas2781_force_fwload_get(struct snd_kcontrol *kcontrol, +static int tasdev_force_fwload_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_soc_component *component = @@ -118,7 +271,7 @@ static int tas2781_force_fwload_get(struct snd_kcontrol *kcontrol, return 0; } -static int tas2781_force_fwload_put(struct snd_kcontrol *kcontrol, +static int tasdev_force_fwload_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_soc_component *component = @@ -127,18 +280,496 @@ static int tas2781_force_fwload_put(struct snd_kcontrol *kcontrol, snd_soc_component_get_drvdata(component); bool change, val = (bool)ucontrol->value.integer.value[0]; + mutex_lock(&tas_priv->codec_lock); if (tas_priv->force_fwload_status == val) change = false; else { change = true; tas_priv->force_fwload_status = val; } + mutex_unlock(&tas_priv->codec_lock); dev_dbg(tas_priv->dev, "%s : Force FWload %s\n", __func__, tas_priv->force_fwload_status ? "ON" : "OFF"); return change; } +static int tasdev_cali_data_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(comp); + struct soc_bytes_ext *bytes_ext = + (struct soc_bytes_ext *) kcontrol->private_value; + unsigned char *dst = ucontrol->value.bytes.data; + unsigned char *data = tas_priv->cali_data.data; + + mutex_lock(&tas_priv->codec_lock); + if (!tas_priv->is_user_space_calidata || + tas_priv->cali_data.total_sz != bytes_ext->max) { + goto out; + } + memcpy(dst, data, bytes_ext->max); +out: + mutex_unlock(&tas_priv->codec_lock); + return 0; +} + +static int calib_data_get(struct tasdevice_priv *tas_priv, int reg, + unsigned char *dst, int data_len) +{ + struct i2c_client *clt = (struct i2c_client *)tas_priv->client; + struct tasdevice *tasdev = tas_priv->tasdevice; + int rc = -1; + int i; + + if (data_len != 4) + return rc; + + for (i = 0; i < tas_priv->ndev; i++) { + if (clt->addr == tasdev[i].dev_addr) { + /* First byte is the device index. */ + dst[0] = i; + tasdevice_dev_bulk_read(tas_priv, i, reg, &dst[1], + 4); + rc = 0; + break; + } + } + + return rc; +} + +static int tas2781_calib_start_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(comp); + struct soc_bytes_ext *bytes_ext = + (struct soc_bytes_ext *) kcontrol->private_value; + const int sum = ARRAY_SIZE(tas2781_cali_start_reg); + unsigned char *dat = ucontrol->value.bytes.data; + int rc = 1; + int i, j; + + mutex_lock(&tas_priv->codec_lock); + if (tas_priv->chip_id != TAS2781 && + bytes_ext->max != 8 * tas_priv->ndev) { + rc = -1; + goto out; + } + + for (i = 0; i < tas_priv->ndev; i++) { + struct tasdevice *tasdev = tas_priv->tasdevice; + struct bulk_reg_val *p = tasdev[i].cali_data_restore; + int k = i * 9; + + if (p == NULL) + continue; + + for (j = 0; j < sum; j++) { + if (p[j].val_len == 1) { + if (p[j].is_locked) + tasdevice_dev_write(tas_priv, i, + TAS2781_TEST_UNLOCK_REG, + TAS2781_TEST_PAGE_UNLOCK); + tasdevice_dev_read(tas_priv, i, p[j].reg, + (int *)&p[j].val[0]); + } else + tasdevice_dev_bulk_read(tas_priv, i, p[j].reg, + p[j].val, 4); + } + + for (j = 0; j < sum - 2; j++) { + if (p[j].val_len == 1) { + if (p[j].is_locked) + tasdevice_dev_write(tas_priv, i, + TAS2781_TEST_UNLOCK_REG, + TAS2781_TEST_PAGE_UNLOCK); + tasdevice_dev_write(tas_priv, i, p[j].reg, + tas2781_cali_start_reg[j].val[0]); + } else + tasdevice_dev_bulk_write(tas_priv, i, p[j].reg, + (unsigned char *) + tas2781_cali_start_reg[j].val, 4); + } + + if (dat[k] != i) { + dev_err(tas_priv->dev, + "%s: no cal-setting for dev %d\n", __func__, + i); + continue; + } + tasdevice_dev_bulk_write(tas_priv, i, p[j].reg, + &dat[i * 9 + 1], 4); + tasdevice_dev_bulk_write(tas_priv, i, p[j + 1].reg, + &dat[i * 9 + 5], 4); + } +out: + mutex_unlock(&tas_priv->codec_lock); + return rc; +} + +static void tas2781_calib_stop_put(struct tasdevice_priv *tas_priv) +{ + const int sum = ARRAY_SIZE(tas2781_cali_start_reg); + int i, j; + + for (i = 0; i < tas_priv->ndev; i++) { + struct tasdevice *tasdev = tas_priv->tasdevice; + struct bulk_reg_val *p = tasdev[i].cali_data_restore; + + if (p == NULL) + continue; + + for (j = 0; j < sum; j++) { + if (p[j].val_len == 1) { + if (p[j].is_locked) + tasdevice_dev_write(tas_priv, i, + TAS2781_TEST_UNLOCK_REG, + TAS2781_TEST_PAGE_UNLOCK); + tasdevice_dev_write(tas_priv, i, p[j].reg, + p[j].val[0]); + } else + tasdevice_dev_bulk_write(tas_priv, i, p[j].reg, + p[j].val, 4); + } + } +} + +static int tas2563_calib_start_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(comp); + const int sum = ARRAY_SIZE(tas2563_cali_start_reg); + int rc = 1; + int i, j; + + mutex_lock(&tas_priv->codec_lock); + if (tas_priv->chip_id != TAS2563) { + rc = -1; + goto out; + } + + for (i = 0; i < tas_priv->ndev; i++) { + struct tasdevice *tasdev = tas_priv->tasdevice; + struct bulk_reg_val *p = tasdev[i].cali_data_restore; + + if (p == NULL) + continue; + for (j = 0; j < sum; j++) { + tasdevice_dev_bulk_read(tas_priv, i, p[j].reg, + p[j].val, 4); + } + + for (j = 0; j < sum; j++) { + tasdevice_dev_bulk_write(tas_priv, i, p[j].reg, + (unsigned char *)tas2563_cali_start_reg[j].val, + 4); + } + } +out: + mutex_unlock(&tas_priv->codec_lock); + return rc; +} + +static void tas2563_calib_stop_put(struct tasdevice_priv *tas_priv) +{ + const int sum = ARRAY_SIZE(tas2563_cali_start_reg); + int i, j; + + for (i = 0; i < tas_priv->ndev; i++) { + struct tasdevice *tasdev = tas_priv->tasdevice; + struct bulk_reg_val *p = tasdev[i].cali_data_restore; + + if (p == NULL) + continue; + + for (j = 0; j < sum; j++) { + tasdevice_dev_bulk_write(tas_priv, i, p[j].reg, + p[j].val, 4); + } + } +} + +static int tasdev_calib_stop_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(comp); + + mutex_lock(&tas_priv->codec_lock); + if (tas_priv->chip_id == TAS2563) + tas2563_calib_stop_put(tas_priv); + else + tas2781_calib_stop_put(tas_priv); + mutex_unlock(&tas_priv->codec_lock); + + return 1; +} + +static int tasdev_cali_data_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(comp); + struct soc_bytes_ext *bytes_ext = + (struct soc_bytes_ext *) kcontrol->private_value; + unsigned char *data = tas_priv->cali_data.data; + int rc = 1; + + mutex_lock(&tas_priv->codec_lock); + if (tas_priv->cali_data.total_sz != bytes_ext->max) { + rc = -1; + goto out; + } + tas_priv->is_user_space_calidata = true; + memcpy(data, ucontrol->value.bytes.data, bytes_ext->max); +out: + mutex_unlock(&tas_priv->codec_lock); + return rc; +} + +static int tas2781_latch_reg_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(comp); + struct i2c_client *clt = (struct i2c_client *)tas_priv->client; + struct tasdevice *tasdev = tas_priv->tasdevice; + unsigned char *dst = ucontrol->value.bytes.data; + int i, val, rc = -1; + + mutex_lock(&tas_priv->codec_lock); + for (i = 0; i < tas_priv->ndev; i++) { + if (clt->addr == tasdev[i].dev_addr) { + /* First byte is the device index. */ + dst[0] = i; + tasdevice_dev_read(tas_priv, i, + TAS2781_RUNTIME_LATCH_RE_REG, &val); + dst[1] = val; + rc = 0; + break; + } + } + mutex_unlock(&tas_priv->codec_lock); + return rc; +} + +static int tasdev_tf_data_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(comp); + struct soc_bytes_ext *bytes_ext = + (struct soc_bytes_ext *) kcontrol->private_value; + unsigned char *dst = ucontrol->value.bytes.data; + unsigned int reg; + int rc = -1; + + if (tas_priv->chip_id == TAS2781) + reg = TAS2781_RUNTIME_RE_REG_TF; + else + reg = TAS2563_RUNTIME_RE_REG_TF; + + mutex_lock(&tas_priv->codec_lock); + rc = calib_data_get(tas_priv, reg, dst, bytes_ext->max - 1); + mutex_unlock(&tas_priv->codec_lock); + + return rc; +} + +static int tasdev_re_data_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(comp); + struct soc_bytes_ext *bytes_ext = + (struct soc_bytes_ext *) kcontrol->private_value; + unsigned char *dst = ucontrol->value.bytes.data; + unsigned int reg; + int rc = -1; + + if (tas_priv->chip_id == TAS2781) + reg = TAS2781_RUNTIME_RE_REG; + else + reg = TAS2563_RUNTIME_RE_REG; + mutex_lock(&tas_priv->codec_lock); + rc = calib_data_get(tas_priv, reg, dst, bytes_ext->max - 1); + mutex_unlock(&tas_priv->codec_lock); + + return rc; +} + +static int tasdev_r0_data_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(comp); + struct soc_bytes_ext *bytes_ext = + (struct soc_bytes_ext *) kcontrol->private_value; + unsigned char *dst = ucontrol->value.bytes.data; + unsigned int reg; + int rc = -1; + + if (tas_priv->chip_id == TAS2781) + reg = TAS2781_PRM_R0_REG; + else + reg = TAS2563_PRM_R0_REG; + mutex_lock(&tas_priv->codec_lock); + rc = calib_data_get(tas_priv, reg, dst, bytes_ext->max - 1); + mutex_unlock(&tas_priv->codec_lock); + + return rc; +} + +static int tasdev_XMA1_data_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(comp); + struct soc_bytes_ext *bytes_ext = + (struct soc_bytes_ext *) kcontrol->private_value; + unsigned char *dst = ucontrol->value.bytes.data; + unsigned int reg = TASDEVICE_XM_A1_REG; + int rc = -1; + + mutex_lock(&tas_priv->codec_lock); + rc = calib_data_get(tas_priv, reg, dst, bytes_ext->max - 1); + mutex_unlock(&tas_priv->codec_lock); + + return rc; +} + +static int tasdev_XMA2_data_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(comp); + struct soc_bytes_ext *bytes_ext = + (struct soc_bytes_ext *) kcontrol->private_value; + unsigned char *dst = ucontrol->value.bytes.data; + unsigned int reg = TASDEVICE_XM_A2_REG; + int rc = -1; + + mutex_lock(&tas_priv->codec_lock); + rc = calib_data_get(tas_priv, reg, dst, bytes_ext->max - 1); + mutex_unlock(&tas_priv->codec_lock); + + return rc; +} + +static int tasdev_nop_get( + struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + return 0; +} + +static int tas2563_digital_gain_get( + struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + unsigned int l = 0, r = mc->max; + unsigned int target, ar_mid, mid, ar_l, ar_r; + unsigned int reg = mc->reg; + unsigned char data[4]; + int ret; + + mutex_lock(&tas_dev->codec_lock); + /* Read the primary device */ + ret = tasdevice_dev_bulk_read(tas_dev, 0, reg, data, 4); + if (ret) { + dev_err(tas_dev->dev, "%s, get AMP vol error\n", __func__); + goto out; + } + + target = get_unaligned_be32(&data[0]); + + while (r > 1 + l) { + mid = (l + r) / 2; + ar_mid = get_unaligned_be32(tas2563_dvc_table[mid]); + if (target < ar_mid) + r = mid; + else + l = mid; + } + + ar_l = get_unaligned_be32(tas2563_dvc_table[l]); + ar_r = get_unaligned_be32(tas2563_dvc_table[r]); + + ucontrol->value.integer.value[0] = + abs(target - ar_l) <= abs(target - ar_r) ? l : r; +out: + mutex_unlock(&tas_dev->codec_lock); + return 0; +} + +static int tas2563_digital_gain_put( + struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(codec); + unsigned int reg = mc->reg; + unsigned int volrd, volwr; + int vol = ucontrol->value.integer.value[0]; + int max = mc->max, i, ret = 1; + unsigned char data[4]; + + vol = clamp(vol, 0, max); + mutex_lock(&tas_dev->codec_lock); + /* Read the primary device */ + ret = tasdevice_dev_bulk_read(tas_dev, 0, reg, data, 4); + if (ret) { + dev_err(tas_dev->dev, "%s, get AMP vol error\n", __func__); + goto out; + } + + volrd = get_unaligned_be32(&data[0]); + volwr = get_unaligned_be32(tas2563_dvc_table[vol]); + + if (volrd == volwr) { + ret = 0; + goto out; + } + + for (i = 0; i < tas_dev->ndev; i++) { + ret = tasdevice_dev_bulk_write(tas_dev, i, reg, + (unsigned char *)tas2563_dvc_table[vol], 4); + if (ret) + dev_err(tas_dev->dev, + "%s, set digital vol error in device %d\n", + __func__, i); + } + +out: + mutex_unlock(&tas_dev->codec_lock); + return ret; +} + +static const struct snd_kcontrol_new tasdevice_snd_controls[] = { + SOC_SINGLE_BOOL_EXT("Speaker Force Firmware Load", 0, + tasdev_force_fwload_get, tasdev_force_fwload_put), +}; + +static const struct snd_kcontrol_new tasdevice_cali_controls[] = { + SOC_SINGLE_EXT("Calibration Stop", SND_SOC_NOPM, 0, 1, 0, + tasdev_nop_get, tasdev_calib_stop_put), + SND_SOC_BYTES_EXT("Amp TF Data", 5, tasdev_tf_data_get, NULL), + SND_SOC_BYTES_EXT("Amp RE Data", 5, tasdev_re_data_get, NULL), + SND_SOC_BYTES_EXT("Amp R0 Data", 5, tasdev_r0_data_get, NULL), + SND_SOC_BYTES_EXT("Amp XMA1 Data", 5, tasdev_XMA1_data_get, NULL), + SND_SOC_BYTES_EXT("Amp XMA2 Data", 5, tasdev_XMA2_data_get, NULL), +}; + static const struct snd_kcontrol_new tas2781_snd_controls[] = { SOC_SINGLE_RANGE_EXT_TLV("Speaker Analog Gain", TAS2781_AMP_LEVEL, 1, 0, 20, 0, tas2781_amp_getvol, @@ -146,8 +777,22 @@ static const struct snd_kcontrol_new tas2781_snd_controls[] = { SOC_SINGLE_RANGE_EXT_TLV("Speaker Digital Gain", TAS2781_DVC_LVL, 0, 0, 200, 1, tas2781_digital_getvol, tas2781_digital_putvol, dvc_tlv), - SOC_SINGLE_BOOL_EXT("Speaker Force Firmware Load", 0, - tas2781_force_fwload_get, tas2781_force_fwload_put), +}; + +static const struct snd_kcontrol_new tas2781_cali_controls[] = { + SND_SOC_BYTES_EXT("Amp Latch Data", 2, tas2781_latch_reg_get, NULL), +}; + +static const struct snd_kcontrol_new tas2563_snd_controls[] = { + SOC_SINGLE_RANGE_EXT_TLV("Speaker Digital Gain", TAS2563_DVC_LVL, 0, + 0, ARRAY_SIZE(tas2563_dvc_table) - 1, 0, + tas2563_digital_gain_get, tas2563_digital_gain_put, + tas2563_dvc_tlv), +}; + +static const struct snd_kcontrol_new tas2563_cali_controls[] = { + SOC_SINGLE_EXT("Calibration Start", SND_SOC_NOPM, 0, 1, 0, + tasdev_nop_get, tas2563_calib_start_put), }; static int tasdevice_set_profile_id(struct snd_kcontrol *kcontrol, @@ -167,6 +812,31 @@ static int tasdevice_set_profile_id(struct snd_kcontrol *kcontrol, return ret; } +static int tasdevice_info_active_id(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(codec); + + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = (int)tas_priv->ndev - 1; + + return 0; +} + +static int tasdevice_info_chip_id(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = TAS2563; + uinfo->value.integer.max = TAS2781; + + return 0; +} + static int tasdevice_info_programs(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) { @@ -223,6 +893,17 @@ static int tasdevice_get_profile_id(struct snd_kcontrol *kcontrol, return 0; } +static int tasdevice_get_chip_id(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(codec); + + ucontrol->value.integer.value[0] = tas_priv->chip_id; + + return 0; +} + static int tasdevice_create_control(struct tasdevice_priv *tas_priv) { struct snd_kcontrol_new *prof_ctrls; @@ -316,15 +997,54 @@ static int tasdevice_configuration_put( return ret; } -static int tasdevice_dsp_create_ctrls( - struct tasdevice_priv *tas_priv) +static int tasdevice_active_id_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(codec); + struct i2c_client *clt = (struct i2c_client *)tas_priv->client; + struct tasdevice *tasdev = tas_priv->tasdevice; + int i; + + for (i = 0; i < tas_priv->ndev; i++) { + if (clt->addr == tasdev[i].dev_addr) { + ucontrol->value.integer.value[0] = i; + return 0; + } + } + + return -1; +} + +static int tasdevice_active_id_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol); + struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(codec); + int nr_dev = ucontrol->value.integer.value[0]; + int max = tas_priv->ndev - 1, rc; + + nr_dev = clamp(nr_dev, 0, max); + + mutex_lock(&tas_priv->codec_lock); + rc = tasdevice_chn_switch(tas_priv, nr_dev); + mutex_unlock(&tas_priv->codec_lock); + + return rc; +} + +static int tasdevice_dsp_create_ctrls(struct tasdevice_priv *tas_priv) { + char *active_dev_name, *cali_name, *chip_id, *conf_name, *prog_name; + struct calidata *cali_data = &tas_priv->cali_data; struct snd_kcontrol_new *dsp_ctrls; - char *prog_name, *conf_name; - int nr_controls = 2; + struct soc_bytes_ext *ext_cali_data; + int nr_controls = 5; int mix_index = 0; int ret; + if (tas_priv->chip_id == TAS2781) + nr_controls++; /* Alloc kcontrol via devm_kzalloc, which don't manually * free the kcontrol */ @@ -336,11 +1056,20 @@ static int tasdevice_dsp_create_ctrls( } /* Create a mixer item for selecting the active profile */ - prog_name = devm_kzalloc(tas_priv->dev, + active_dev_name = devm_kzalloc(tas_priv->dev, + SNDRV_CTL_ELEM_ID_NAME_MAXLEN, GFP_KERNEL); + cali_name = devm_kzalloc(tas_priv->dev, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, + GFP_KERNEL); + chip_id = devm_kzalloc(tas_priv->dev, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, + GFP_KERNEL); + conf_name = devm_kzalloc(tas_priv->dev, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, GFP_KERNEL); - conf_name = devm_kzalloc(tas_priv->dev, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, + prog_name = devm_kzalloc(tas_priv->dev, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, GFP_KERNEL); - if (!prog_name || !conf_name) { + ext_cali_data = devm_kzalloc(tas_priv->dev, sizeof(*ext_cali_data), + GFP_KERNEL); + if (!active_dev_name || !cali_name || !conf_name || !chip_id || + !ext_cali_data || !prog_name) { ret = -ENOMEM; goto out; } @@ -363,6 +1092,68 @@ static int tasdevice_dsp_create_ctrls( dsp_ctrls[mix_index].put = tasdevice_configuration_put; mix_index++; + scnprintf(active_dev_name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, + "Activate Tasdevice Id"); + dsp_ctrls[mix_index].name = active_dev_name; + dsp_ctrls[mix_index].iface = SNDRV_CTL_ELEM_IFACE_MIXER; + dsp_ctrls[mix_index].info = tasdevice_info_active_id; + dsp_ctrls[mix_index].get = tasdevice_active_id_get; + dsp_ctrls[mix_index].put = tasdevice_active_id_put; + mix_index++; + + scnprintf(chip_id, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, + "Tasdevice Chip Id"); + dsp_ctrls[mix_index].name = chip_id; + dsp_ctrls[mix_index].iface = SNDRV_CTL_ELEM_IFACE_MIXER; + dsp_ctrls[mix_index].info = tasdevice_info_chip_id; + dsp_ctrls[mix_index].get = tasdevice_get_chip_id; + mix_index++; + + scnprintf(cali_name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, + "Speaker Calibrated Data"); + ext_cali_data->max = tas_priv->ndev * CAL_DAT_SZ; + tas_priv->cali_data.total_sz = ext_cali_data->max; + tas_priv->cali_data.data = devm_kzalloc(tas_priv->dev, + ext_cali_data->max, GFP_KERNEL); + dsp_ctrls[mix_index].name = cali_name; + dsp_ctrls[mix_index].iface = SNDRV_CTL_ELEM_IFACE_MIXER; + dsp_ctrls[mix_index].info = snd_soc_bytes_info_ext; + dsp_ctrls[mix_index].get = tasdev_cali_data_get; + dsp_ctrls[mix_index].put = tasdev_cali_data_put; + dsp_ctrls[mix_index].private_value = (unsigned long)ext_cali_data; + mix_index++; + + cali_data->data = devm_kzalloc(tas_priv->dev, tas_priv->ndev * + (cali_data->reg_array_sz * 4 + 1), GFP_KERNEL); + if (!cali_data->data) + return -ENOMEM; + + if (tas_priv->chip_id == TAS2781) { + struct soc_bytes_ext *ext_cali_start; + char *cali_start_name; + + cali_start_name = devm_kzalloc(tas_priv->dev, + SNDRV_CTL_ELEM_ID_NAME_MAXLEN, GFP_KERNEL); + ext_cali_start = devm_kzalloc(tas_priv->dev, + sizeof(*ext_cali_start), GFP_KERNEL); + if (!cali_start_name || !ext_cali_start) { + ret = -ENOMEM; + goto out; + } + + scnprintf(cali_start_name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, + "Calibration Start"); + ext_cali_data->max = tas_priv->ndev * 9; + dsp_ctrls[mix_index].name = cali_start_name; + dsp_ctrls[mix_index].iface = SNDRV_CTL_ELEM_IFACE_MIXER; + dsp_ctrls[mix_index].info = snd_soc_bytes_info_ext; + dsp_ctrls[mix_index].put = tas2781_calib_start_put; + dsp_ctrls[mix_index].get = tasdev_nop_get; + dsp_ctrls[mix_index].private_value = + (unsigned long)ext_cali_start; + mix_index++; + } + ret = snd_soc_add_component_controls(tas_priv->codec, dsp_ctrls, nr_controls < mix_index ? nr_controls : mix_index); @@ -370,6 +1161,54 @@ static int tasdevice_dsp_create_ctrls( return ret; } +static int tasdevice_create_cali_ctrls(struct tasdevice_priv *tas_priv) +{ + struct calidata *cali_data = &tas_priv->cali_data; + struct snd_kcontrol_new *cali_ctrls; + unsigned int num_controls; + int rc; + + rc = snd_soc_add_component_controls(tas_priv->codec, + tasdevice_cali_controls, ARRAY_SIZE(tasdevice_cali_controls)); + if (rc < 0) { + dev_err(tas_priv->dev, "%s: Add cali control err rc = %d", + __func__, rc); + return rc; + } + + if (tas_priv->chip_id == TAS2781) { + cali_ctrls = (struct snd_kcontrol_new *)tas2781_cali_controls; + num_controls = ARRAY_SIZE(tas2781_cali_controls); + cali_data->reg_array = (unsigned int *)tas2781_cali_data_reg; + cali_data->reg_array_sz = ARRAY_SIZE(tas2781_cali_data_reg); + } else { + struct tasdevice *tasdev = tas_priv->tasdevice; + int i; + + cali_ctrls = (struct snd_kcontrol_new *)tas2563_cali_controls; + num_controls = ARRAY_SIZE(tas2563_cali_controls); + cali_data->reg_array = (unsigned int *)tas2563_cali_data_reg; + cali_data->reg_array_sz = sizeof(tas2563_cali_data_reg); + for (i = 0; i < tas_priv->ndev; i++) { + tasdev[i].cali_data_restore = + kmemdup(tas2563_cali_start_reg, + sizeof(tas2563_cali_start_reg), GFP_KERNEL); + if (!tasdev[i].cali_data_restore) + return -ENOMEM; + } + } + + rc = snd_soc_add_component_controls(tas_priv->codec, cali_ctrls, + num_controls); + if (rc < 0) { + dev_err(tas_priv->dev, "%s: Add control err rc = %d", + __func__, rc); + return rc; + } + + return rc; +} + static void tasdevice_fw_ready(const struct firmware *fmw, void *context) { @@ -380,23 +1219,36 @@ static void tasdevice_fw_ready(const struct firmware *fmw, mutex_lock(&tas_priv->codec_lock); ret = tasdevice_rca_parser(tas_priv, fmw); - if (ret) + if (ret) { + tasdevice_config_info_remove(tas_priv); goto out; + } tasdevice_create_control(tas_priv); tasdevice_dsp_remove(tas_priv); tasdevice_calbin_remove(tas_priv); - tas_priv->fw_state = TASDEVICE_DSP_FW_PENDING; + tas_priv->fw_state = TASDEVICE_RCA_FW_OK; scnprintf(tas_priv->coef_binaryname, 64, "%s_coef.bin", tas_priv->dev_name); + ret = tasdevice_dsp_parser(tas_priv); if (ret) { dev_err(tas_priv->dev, "dspfw load %s error\n", tas_priv->coef_binaryname); - tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL; goto out; } - tasdevice_dsp_create_ctrls(tas_priv); + + ret = tasdevice_dsp_create_ctrls(tas_priv); + if (ret) { + dev_err(tas_priv->dev, "dsp controls error\n"); + goto out; + } + + ret = tasdevice_create_cali_ctrls(tas_priv); + if (ret) { + dev_err(tas_priv->dev, "cali controls error\n"); + goto out; + } tas_priv->fw_state = TASDEVICE_DSP_FW_ALL_OK; @@ -417,9 +1269,8 @@ static void tasdevice_fw_ready(const struct firmware *fmw, tasdevice_prmg_load(tas_priv, 0); tas_priv->cur_prog = 0; out: - if (tas_priv->fw_state == TASDEVICE_DSP_FW_FAIL) { - /*If DSP FW fail, kcontrol won't be created */ - tasdevice_config_info_remove(tas_priv); + if (tas_priv->fw_state == TASDEVICE_RCA_FW_OK) { + /*If DSP FW fail, DSP kcontrol won't be created */ tasdevice_dsp_remove(tas_priv); } mutex_unlock(&tas_priv->codec_lock); @@ -466,14 +1317,14 @@ static int tasdevice_startup(struct snd_pcm_substream *substream, { struct snd_soc_component *codec = dai->component; struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(codec); - int ret = 0; - if (tas_priv->fw_state != TASDEVICE_DSP_FW_ALL_OK) { - dev_err(tas_priv->dev, "DSP bin file not loaded\n"); - ret = -EINVAL; + if (!(tas_priv->fw_state == TASDEVICE_DSP_FW_ALL_OK || + tas_priv->fw_state == TASDEVICE_RCA_FW_OK)) { + dev_err(tas_priv->dev, "Bin file not loaded\n"); + return -EINVAL; } - return ret; + return 0; } static int tasdevice_hw_params(struct snd_pcm_substream *substream, @@ -541,7 +1392,7 @@ static const struct snd_soc_dai_ops tasdevice_dai_ops = { static struct snd_soc_dai_driver tasdevice_dai_driver[] = { { - .name = "tas2781_codec", + .name = "tasdev_codec", .id = 0, .playback = { .stream_name = "Playback", @@ -565,13 +1416,41 @@ static struct snd_soc_dai_driver tasdevice_dai_driver[] = { static int tasdevice_codec_probe(struct snd_soc_component *codec) { struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(codec); + int rc; + + if (tas_priv->chip_id == TAS2781) { + rc = snd_soc_add_component_controls(codec, + tas2781_snd_controls, + ARRAY_SIZE(tas2781_snd_controls)); + if (rc < 0) { + dev_err(tas_priv->dev, "%s: Add control err rc = %d", + __func__, rc); + return rc; + } + } else { + rc = snd_soc_add_component_controls(codec, + tas2563_snd_controls, + ARRAY_SIZE(tas2563_snd_controls)); + if (rc < 0) { + dev_err(tas_priv->dev, "%s: Add control err rc = %d", + __func__, rc); + return rc; + } + } + + rc = tascodec_init(tas_priv, codec, THIS_MODULE, tasdevice_fw_ready); - return tascodec_init(tas_priv, codec, THIS_MODULE, tasdevice_fw_ready); + return rc; } static void tasdevice_deinit(void *context) { struct tasdevice_priv *tas_priv = (struct tasdevice_priv *) context; + struct tasdevice *tasdev = tas_priv->tasdevice; + int i; + + for (i = 0; i < tas_priv->ndev; i++) + kfree(tasdev[i].cali_data_restore); tasdevice_config_info_remove(tas_priv); tasdevice_dsp_remove(tas_priv); @@ -591,8 +1470,8 @@ static const struct snd_soc_component_driver soc_codec_driver_tasdevice = { .probe = tasdevice_codec_probe, .remove = tasdevice_codec_remove, - .controls = tas2781_snd_controls, - .num_controls = ARRAY_SIZE(tas2781_snd_controls), + .controls = tasdevice_snd_controls, + .num_controls = ARRAY_SIZE(tasdevice_snd_controls), .dapm_widgets = tasdevice_dapm_widgets, .num_dapm_widgets = ARRAY_SIZE(tasdevice_dapm_widgets), .dapm_routes = tasdevice_audio_map, -- 2.34.1

5 6

[PATCH 0/5] ASoC/SOF/PCI/Intel: add PantherLake support
by Pierre-Louis Bossart 08 Aug '24

08 Aug '24

Add initial support for the PantherLake platform, and initial ACPI configurations. This patchset depends on the first patch of "[PATCH 0/3] ALSA/PCI: add PantherLake audio support" Bard Liao (2): ASoC: Intel: soc-acpi-intel-ptl-match: add rt711-sdca table ASoC: Intel: soc-acpi-intel-ptl-match: Add rt722 support Fred Oh (1): ASoC: SOF: Intel: add PTL specific power control register Pierre-Louis Bossart (2): ASoC: SOF: Intel: add initial support for PTL ASoC: Intel: soc-acpi: add PTL match tables include/sound/soc-acpi-intel-match.h | 2 + sound/soc/intel/common/Makefile | 1 + .../intel/common/soc-acpi-intel-ptl-match.c | 121 ++++++++++++++++++ sound/soc/sof/intel/Kconfig | 17 +++ sound/soc/sof/intel/Makefile | 2 + sound/soc/sof/intel/hda-dsp.c | 1 + sound/soc/sof/intel/hda.h | 1 + sound/soc/sof/intel/lnl.c | 27 ++++ sound/soc/sof/intel/mtl.c | 16 ++- sound/soc/sof/intel/mtl.h | 2 + sound/soc/sof/intel/pci-ptl.c | 77 +++++++++++ sound/soc/sof/intel/shim.h | 1 + 12 files changed, 266 insertions(+), 2 deletions(-) create mode 100644 sound/soc/intel/common/soc-acpi-intel-ptl-match.c create mode 100644 sound/soc/sof/intel/pci-ptl.c -- 2.43.0

2 9

Re: [PATCH v11 07/10] mtd: spi-nor: Add stacked memories support in spi-nor
by Michael Walle 07 Aug '24

07 Aug '24

Hi, > Based on the inputs/suggestions from Tudor, i am planning to add a new > layer between the SPI-NOR and MTD layers to support stacked and parallel > configurations. This new layer will be part of the spi-nor and located in > mtd/spi-nor/ Will AMD submit to maintain this layer? What happens if the maintainer will leave AMD? TBH, personally, I don't like to maintain such a niche feature. I'd really like to see some use cases and performance reports for this, like actual boards (and no evaluation boards don't count). Why wouldn't someone just use an octal flash? And as already mentioned there is also mtdcat, which seems to duplicate some features? -michael

5 13

[PATCH] ASoC: remove bespoke trigger support
by Kuninori Morimoto 06 Aug '24

06 Aug '24

Bespoke trigger support was added when Linux v3.5 by this patch. commit 07bf84aaf736781a283b1bd36eaa911453b14574 ("ASoC: dpcm: Add bespoke trigger()") test-component driver is using it, but this is because it indicates used function for debug/trace purpose. Except test-component driver, bespoke trigger has never been used over 10 years in upstream. We can re-support it if needed in the future, but let's remove it for now, because it just noise in upstream. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> --- include/sound/soc-dai.h | 5 +--- include/sound/soc-dpcm.h | 1 - sound/soc/generic/test-component.c | 9 ------ sound/soc/soc-dai.c | 20 ------------- sound/soc/soc-pcm.c | 47 +++--------------------------- 5 files changed, 5 insertions(+), 77 deletions(-) diff --git a/include/sound/soc-dai.h b/include/sound/soc-dai.h index bbb72ad4c9518..ab4e109fe71d2 100644 --- a/include/sound/soc-dai.h +++ b/include/sound/soc-dai.h @@ -240,8 +240,6 @@ int snd_soc_pcm_dai_new(struct snd_soc_pcm_runtime *rtd); int snd_soc_pcm_dai_prepare(struct snd_pcm_substream *substream); int snd_soc_pcm_dai_trigger(struct snd_pcm_substream *substream, int cmd, int rollback); -int snd_soc_pcm_dai_bespoke_trigger(struct snd_pcm_substream *substream, - int cmd); void snd_soc_pcm_dai_delay(struct snd_pcm_substream *substream, snd_pcm_sframes_t *cpu_delay, snd_pcm_sframes_t *codec_delay); @@ -345,8 +343,7 @@ struct snd_soc_dai_ops { */ int (*trigger)(struct snd_pcm_substream *, int, struct snd_soc_dai *); - int (*bespoke_trigger)(struct snd_pcm_substream *, int, - struct snd_soc_dai *); + /* * For hardware based FIFO caused delay reporting. * Optional. diff --git a/include/sound/soc-dpcm.h b/include/sound/soc-dpcm.h index ebd24753dd000..773f2db8c31c8 100644 --- a/include/sound/soc-dpcm.h +++ b/include/sound/soc-dpcm.h @@ -58,7 +58,6 @@ enum snd_soc_dpcm_state { enum snd_soc_dpcm_trigger { SND_SOC_DPCM_TRIGGER_PRE = 0, SND_SOC_DPCM_TRIGGER_POST, - SND_SOC_DPCM_TRIGGER_BESPOKE, }; /* diff --git a/sound/soc/generic/test-component.c b/sound/soc/generic/test-component.c index e9e5e235a8a65..df2487b700cca 100644 --- a/sound/soc/generic/test-component.c +++ b/sound/soc/generic/test-component.c @@ -181,14 +181,6 @@ static int test_dai_trigger(struct snd_pcm_substream *substream, int cmd, struct return 0; } -static int test_dai_bespoke_trigger(struct snd_pcm_substream *substream, - int cmd, struct snd_soc_dai *dai) -{ - mile_stone(dai); - - return 0; -} - static const u64 test_dai_formats = /* * Select below from Sound Card, not auto @@ -228,7 +220,6 @@ static const struct snd_soc_dai_ops test_verbose_ops = { .hw_params = test_dai_hw_params, .hw_free = test_dai_hw_free, .trigger = test_dai_trigger, - .bespoke_trigger = test_dai_bespoke_trigger, .auto_selectable_formats = &test_dai_formats, .num_auto_selectable_formats = 1, }; diff --git a/sound/soc/soc-dai.c b/sound/soc/soc-dai.c index 9e47053419c16..302ca753a1f35 100644 --- a/sound/soc/soc-dai.c +++ b/sound/soc/soc-dai.c @@ -685,26 +685,6 @@ int snd_soc_pcm_dai_trigger(struct snd_pcm_substream *substream, return ret; } -int snd_soc_pcm_dai_bespoke_trigger(struct snd_pcm_substream *substream, - int cmd) -{ - struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream); - struct snd_soc_dai *dai; - int i, ret; - - for_each_rtd_dais(rtd, i, dai) { - if (dai->driver->ops && - dai->driver->ops->bespoke_trigger) { - ret = dai->driver->ops->bespoke_trigger(substream, - cmd, dai); - if (ret < 0) - return soc_dai_ret(dai, ret); - } - } - - return 0; -} - void snd_soc_pcm_dai_delay(struct snd_pcm_substream *substream, snd_pcm_sframes_t *cpu_delay, snd_pcm_sframes_t *codec_delay) diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index 4571785736f76..5646525ad7924 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -2371,14 +2371,6 @@ static int dpcm_fe_dai_do_trigger(struct snd_pcm_substream *substream, int cmd) break; } break; - case SND_SOC_DPCM_TRIGGER_BESPOKE: - /* bespoke trigger() - handles both FE and BEs */ - - dev_dbg(fe->dev, "ASoC: bespoke trigger FE %s cmd %d\n", - fe->dai_link->name, cmd); - - ret = snd_soc_pcm_dai_bespoke_trigger(substream, cmd); - break; default: dev_err(fe->dev, "ASoC: invalid trigger cmd %d for %s\n", cmd, fe->dai_link->name); @@ -2508,26 +2500,12 @@ static int dpcm_fe_dai_prepare(struct snd_pcm_substream *substream) static int dpcm_run_update_shutdown(struct snd_soc_pcm_runtime *fe, int stream) { - struct snd_pcm_substream *substream = - snd_soc_dpcm_get_substream(fe, stream); - enum snd_soc_dpcm_trigger trigger = fe->dai_link->trigger[stream]; int err; dev_dbg(fe->dev, "ASoC: runtime %s close on FE %s\n", stream ? "capture" : "playback", fe->dai_link->name); - if (trigger == SND_SOC_DPCM_TRIGGER_BESPOKE) { - /* call bespoke trigger - FE takes care of all BE triggers */ - dev_dbg(fe->dev, "ASoC: bespoke trigger FE %s cmd stop\n", - fe->dai_link->name); - - err = snd_soc_pcm_dai_bespoke_trigger(substream, SNDRV_PCM_TRIGGER_STOP); - } else { - dev_dbg(fe->dev, "ASoC: trigger FE %s cmd stop\n", - fe->dai_link->name); - - err = dpcm_be_dai_trigger(fe, stream, SNDRV_PCM_TRIGGER_STOP); - } + err = dpcm_be_dai_trigger(fe, stream, SNDRV_PCM_TRIGGER_STOP); dpcm_be_dai_hw_free(fe, stream); @@ -2541,10 +2519,7 @@ static int dpcm_run_update_shutdown(struct snd_soc_pcm_runtime *fe, int stream) static int dpcm_run_update_startup(struct snd_soc_pcm_runtime *fe, int stream) { - struct snd_pcm_substream *substream = - snd_soc_dpcm_get_substream(fe, stream); struct snd_soc_dpcm *dpcm; - enum snd_soc_dpcm_trigger trigger = fe->dai_link->trigger[stream]; int ret = 0; dev_dbg(fe->dev, "ASoC: runtime %s open on FE %s\n", @@ -2588,23 +2563,9 @@ static int dpcm_run_update_startup(struct snd_soc_pcm_runtime *fe, int stream) fe->dpcm[stream].state == SND_SOC_DPCM_STATE_STOP) return 0; - if (trigger == SND_SOC_DPCM_TRIGGER_BESPOKE) { - /* call trigger on the frontend - FE takes care of all BE triggers */ - dev_dbg(fe->dev, "ASoC: bespoke trigger FE %s cmd start\n", - fe->dai_link->name); - - ret = snd_soc_pcm_dai_bespoke_trigger(substream, SNDRV_PCM_TRIGGER_START); - if (ret < 0) - goto hw_free; - } else { - dev_dbg(fe->dev, "ASoC: trigger FE %s cmd start\n", - fe->dai_link->name); - - ret = dpcm_be_dai_trigger(fe, stream, - SNDRV_PCM_TRIGGER_START); - if (ret < 0) - goto hw_free; - } + ret = dpcm_be_dai_trigger(fe, stream, SNDRV_PCM_TRIGGER_START); + if (ret < 0) + goto hw_free; return 0; -- 2.43.0

2 3

[PATCH v6 0/9] iio: adc: dfsdm: add scaling support
by Olivier Moysan 06 Aug '24

06 Aug '24

The aim of this serie is to add scaling support to STM32 DFSDM peripheral in the analog context. The DFSDM currently operates as a consumer of IIO channels provided by a generic SD modulator. As previously discussed in RFC [1], this topology is not suitable for implementing scaling. This series brings the integration of the DFSDM driver with the new IIO backend framework [2], enabling the DFSDM IIO device to offer scaling feature based on reference voltage data obtained from the IIO SD modulator backend. This generic SD modulator backend takes the place of the former SD modulator, used with legacy implementation. The DFSDM driver has been updated to adopt the generic ADC channel binding [3]. The reasons for this include: - Reducing the use of proprietary properties - Simplifying the coexistence of legacy and new backend bindings - Prepare the support of the MDF peripheral on STM32MP25 SoC Backward compatibility is maintained through legacy support. This series extends the backend framework with the following APIs: - iio_backend_read_raw: This API is intented to retrieve channel attributes from the backend. It is based on IIO framework read_raw API. - iio_backend_read_scale / iio_backend_read_offset Dedicated APIs to read scale and offset channel values. - iio_backend_disable / iio_backend_enable: backend enable/disable to be used for PM management - devm_iio_backend_fwnode_get Intended for parsing DT subnodes to allow generic channel binding support, as generic channel DT nodes are not populated as devices. [1]: https://lore.kernel.org/lkml/20200204101008.11411-1-olivier.moysan@st.com/ [2]: https://lore.kernel.org/all/20240206-iio-backend-v9-0-df66d159c000@analog.c… [3]: devicetree/bindings/iio/adc/adc.yaml Changes in v2: - Update enable/disable backend API - Rename devm_iio_backend_subnode_get(), as devm_iio_backend_fwnode_get() - Update iio_backend_read_raw() prototype to fully match IIO framework read_raw callback prototype. - Change st,adc-channel-type property name and type in DFSDM binding - Remove sd-backend and rename ads1201 compatibles in SD binding Changes in v3: - Add iio_backend_read_scale and iio_backend_read_offset - Remove sd-backend compatible. Adapt existing sd modulator driver and binding to support backend topology. - Misc corrections in DFSDM binding & minor changes in DFSDM driver Changes in v4: - Remove allOf and rework examples in SD modulator binding - Wrap lines to 80 characters in IIO code Changes in v5: - Move iio_backend_read_scale and iio_backend_read_offset to inline and update prototype - Fix channel number & remove legacy binding example in DFSDM binding - Rearrange DFSDM patches to fix build issue in serie - Split SD modulator binding patch. Move reference voltage change in a separate patch Changes in v6: - Minor cleanup in DFSDM binding - Fix vref-supply dependency condition in SD modulator binding Olivier Moysan (9): iio: add read scale and offset services to iio backend framework iio: add enable and disable services to iio backend framework iio: add child nodes support in iio backend framework dt-bindings: iio: dfsdm: move to backend framework dt-bindings: iio: add backend support to sd modulator dt-bindings: iio: add vref support to sd modulator iio: adc: stm32-dfsdm: adopt generic channels bindings iio: add iio backend support to sd modulator iio: adc: stm32-dfsdm: add scaling support to dfsdm .../iio/adc/sigma-delta-modulator.yaml | 25 +- .../bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 122 +++++++- drivers/iio/adc/Kconfig | 2 + drivers/iio/adc/sd_adc_modulator.c | 92 +++++- drivers/iio/adc/stm32-dfsdm-adc.c | 293 +++++++++++++++--- drivers/iio/industrialio-backend.c | 101 +++++- include/linux/iio/backend.h | 29 +- 7 files changed, 592 insertions(+), 72 deletions(-) base-commit: bf829a98bc4bb9076a2fd70f4a69ea7e281863fa -- 2.25.1

2 3