June 2024 - Alsa-devel - mailman.alsa-project.org

[PATCH 00/11] ASoC: simple-card: sync support
by Kuninori Morimoto 06 Jun '24

06 Jun '24

Hi Mark We have simle-card / audio-graph / audio-graph2, basically these supports same feature but is using different DT style. Because we are using 3 drivers, some feature was added to one driver, but other drivers doesn't have it. This patch set try to sync it on these 3 drivers. Kuninori Morimoto (11): ASoC: simple-card-utils: remove both playback/capture_only check ASoC: audio-graph-card2: add ep_to_port() / port_to_ports() ASoC: audio-graph-card2: remove ports node name check ASoC: audio-graph-card2: expand dai_link property part ASoC: audio-graph-card2: merge graph_parse_mclk_fs() into graph_link_init() ASoC: audio-graph-card: add ep_to_port() / port_to_ports() ASoC: audio-graph-card: remove ports node name check ASoC: audio-graph-card: enable playback/capture_only property ASoC: audio-graph-card: merge graph_parse_mclk_fs() into graph_link_init() ASoC: simple-audio-card: enable playback/capture_only property ASoC: simple-audio-card: merge simple_parse_mclk_fs() into simple_link_init() include/sound/simple_card_utils.h | 2 +- sound/soc/generic/audio-graph-card.c | 95 ++++++++------ sound/soc/generic/audio-graph-card2.c | 171 +++++++++++++++----------- sound/soc/generic/simple-card-utils.c | 23 ++-- sound/soc/generic/simple-card.c | 56 +++++---- 5 files changed, 198 insertions(+), 149 deletions(-) -- 2.43.0

2 12

[PATCH v2 0/2] ASoC: fsl_xcvr: Support i.MX95 platform
by Shengjiu Wang 06 Jun '24

06 Jun '24

On i.MX95 wakeup domain, there is one instance of Audio XCVR supporting SPDIF mode with a connection to the Audio XCVR physical interface. changes in v2: - Merge patch 1&2, 3&4 from v1 together. - Add more comments in commit message - Add constaint for clocks used on i.mx95 - Add 'select SND_SOC_FSL_UTILS' for compiling issue. Shengjiu Wang (2): ASoC: dt-bindings: fsl,xcvr: Add compatible string for i.MX95 ASoC: fsl_xcvr: Add support for i.MX95 platform .../devicetree/bindings/sound/fsl,xcvr.yaml | 55 ++++++-- sound/soc/fsl/Kconfig | 1 + sound/soc/fsl/fsl_xcvr.c | 128 ++++++++++++------ sound/soc/fsl/fsl_xcvr.h | 91 +++++++++++++ 4 files changed, 222 insertions(+), 53 deletions(-) -- 2.34.1

4 5

[PATCH] ASoC: cs35l56: Use scope-based resource management in cs35l56_try_get_broken_sdca_spkid_gpio()
by Markus Elfring 05 Jun '24

05 Jun '24

From: Markus Elfring <elfring(a)users.sourceforge.net> Date: Wed, 5 Jun 2024 22:02:09 +0200 Scope-based resource management became supported also for another programming interface by contributions of Jonathan Cameron on 2024-02-17. See also the commit 59ed5e2d505bf5f9b4af64d0021cd0c96aec1f7c ("device property: Add cleanup.h based fwnode_handle_put() scope based cleanup."). * Thus use the attribute “__free(fwnode_handle)”. * Reduce the scope for the local variable “af01_fwnode”. * Omit explicit fwnode_handle_put() calls accordingly. Signed-off-by: Markus Elfring <elfring(a)users.sourceforge.net> --- See also the commit fbd741f0993203d07b2b6562d68d1e5e4745b59b ("ASoC: cs35l56: fix usages of device_get_named_child_node()"). sound/soc/codecs/cs35l56.c | 18 ++++-------------- 1 file changed, 4 insertions(+), 14 deletions(-) diff --git a/sound/soc/codecs/cs35l56.c b/sound/soc/codecs/cs35l56.c index 758dfdf9d3ea..db41fc42dcac 100644 --- a/sound/soc/codecs/cs35l56.c +++ b/sound/soc/codecs/cs35l56.c @@ -1345,13 +1345,13 @@ static void cs35l56_acpi_dev_release_driver_gpios(void *adev) static int cs35l56_try_get_broken_sdca_spkid_gpio(struct cs35l56_private *cs35l56) { - struct fwnode_handle *af01_fwnode; const union acpi_object *obj; struct gpio_desc *desc; int ret; /* Find the SDCA node containing the GpioIo */ - af01_fwnode = device_get_named_child_node(cs35l56->base.dev, "AF01"); + struct fwnode_handle *af01_fwnode __free(fwnode_handle) + = device_get_named_child_node(cs35l56->base.dev, "AF01"); if (!af01_fwnode) { dev_dbg(cs35l56->base.dev, "No AF01 node\n"); return -ENOENT; @@ -1361,7 +1361,6 @@ static int cs35l56_try_get_broken_sdca_spkid_gpio(struct cs35l56_private *cs35l5 "spk-id-gpios", ACPI_TYPE_PACKAGE, &obj); if (ret) { dev_dbg(cs35l56->base.dev, "Could not get spk-id-gpios package: %d\n", ret); - fwnode_handle_put(af01_fwnode); return -ENOENT; } @@ -1369,7 +1368,6 @@ static int cs35l56_try_get_broken_sdca_spkid_gpio(struct cs35l56_private *cs35l5 if (obj->package.count != 4) { dev_warn(cs35l56->base.dev, "Unexpected spk-id element count %d\n", obj->package.count); - fwnode_handle_put(af01_fwnode); return -ENOENT; } @@ -1383,26 +1381,21 @@ static int cs35l56_try_get_broken_sdca_spkid_gpio(struct cs35l56_private *cs35l5 * ACPI_COMPANION(). */ ret = acpi_dev_add_driver_gpios(adev, cs35l56_af01_spkid_gpios_mapping); - if (ret) { - fwnode_handle_put(af01_fwnode); + if (ret) return dev_err_probe(cs35l56->base.dev, ret, "Failed to add gpio mapping to AF01\n"); - } ret = devm_add_action_or_reset(cs35l56->base.dev, cs35l56_acpi_dev_release_driver_gpios, adev); - if (ret) { - fwnode_handle_put(af01_fwnode); + if (ret) return ret; - } dev_dbg(cs35l56->base.dev, "Added spk-id-gpios mapping to AF01\n"); } desc = fwnode_gpiod_get_index(af01_fwnode, "spk-id", 0, GPIOD_IN, NULL); if (IS_ERR(desc)) { - fwnode_handle_put(af01_fwnode); ret = PTR_ERR(desc); return dev_err_probe(cs35l56->base.dev, ret, "Get GPIO from AF01 failed\n"); } @@ -1411,13 +1404,10 @@ static int cs35l56_try_get_broken_sdca_spkid_gpio(struct cs35l56_private *cs35l5 gpiod_put(desc); if (ret < 0) { - fwnode_handle_put(af01_fwnode); dev_err_probe(cs35l56->base.dev, ret, "Error reading spk-id GPIO\n"); return ret; } - fwnode_handle_put(af01_fwnode); - dev_info(cs35l56->base.dev, "Got spk-id from AF01\n"); return ret; -- 2.45.1

1 0

[PATCH v2 0/4] soundwire: bus: suppress probe deferral errors
by Johan Hovold 05 Jun '24

05 Jun '24

The soundwire bus code is incorrectly logging probe deferrals as errors. This series addresses that, cleans up the soundwire bus logging and drops the unused soudwire driver name field. Johan Changes in v2 - drop probe error message completely - drop soundwire driver name field - cleanup probe warning messages - drop probe debug message Johan Hovold (4): soundwire: bus: suppress probe deferral errors soundwire: bus: drop unused driver name field soundwire: bus: clean up probe warnings soundwire: bus: drop redundant probe debug message drivers/soundwire/bus_type.c | 21 ++++----------------- include/linux/soundwire/sdw.h | 2 -- 2 files changed, 4 insertions(+), 19 deletions(-) -- 2.44.1

3 16

[PATCH] ASoC: atmel: atmel-classd: Re-add dai_link->platform to fix card init
by Andrei Simion 05 Jun '24

05 Jun '24

The removed dai_link->platform component cause a fail which is exposed at runtime. (ex: when a sound tool is used) This patch re-adds the dai_link->platform component to have a full card registered. Before this patch: :~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: CLASSD [CLASSD], device 0: CLASSD PCM snd-soc-dummy-dai-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 :~$ speaker-test -t sine speaker-test 1.2.6 Playback device is default Stream parameters are 48000Hz, S16_LE, 1 channels Sine wave rate is 440.0000Hz Playback open error: -22,Invalid argument After this patch which restores the platform component: :~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: CLASSD [CLASSD], device 0: CLASSD PCM snd-soc-dummy-dai-0 [CLASSD PCM snd-soc-dummy-dai-0] Subdevices: 1/1 Subdevice #0: subdevice #0 -> Resolve the playback error. Fixes: 2f650f87c03c ("ASoC: atmel: remove unnecessary dai_link->platform") Signed-off-by: Andrei Simion <andrei.simion(a)microchip.com> --- sound/soc/atmel/atmel-classd.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/sound/soc/atmel/atmel-classd.c b/sound/soc/atmel/atmel-classd.c index 6aed1ee443b4..ba314b279919 100644 --- a/sound/soc/atmel/atmel-classd.c +++ b/sound/soc/atmel/atmel-classd.c @@ -473,19 +473,22 @@ static int atmel_classd_asoc_card_init(struct device *dev, if (!dai_link) return -ENOMEM; - comp = devm_kzalloc(dev, sizeof(*comp), GFP_KERNEL); + comp = devm_kzalloc(dev, 2 * sizeof(*comp), GFP_KERNEL); if (!comp) return -ENOMEM; - dai_link->cpus = comp; + dai_link->cpus = &comp[0]; dai_link->codecs = &snd_soc_dummy_dlc; + dai_link->platforms = &comp[1]; dai_link->num_cpus = 1; dai_link->num_codecs = 1; + dai_link->num_platforms = 1; dai_link->name = "CLASSD"; dai_link->stream_name = "CLASSD PCM"; dai_link->cpus->dai_name = dev_name(dev); + dai_link->platforms->name = dev_name(dev); card->dai_link = dai_link; card->num_links = 1; -- 2.34.1

4 3

[PATCH] ALSA: hda/realtek: Add quirk for IdeaPad 330-17IKB 81DM instead of Yoga Duet 7 13ITL6
by Airat Makhmutov 05 Jun '24

05 Jun '24

From: Ajrat Makhmutov <rauty(a)altlinux.org> Headset microphone do not work out of the box with this laptop. This quirk fixes it. Based on the alsa-info https://alsa-project.org/db/?f=268601dbdb76f9a4c18d71e210091ffed4bf2818 that Zihao Wang sent me and the amixer data from linux-hardware.org for both devices, Zihao Wang specified the wrong subsystem id in his patch: https://lore.kernel.org/all/20220424084120.74125-1-wzhd@ustc.edu/. --- sound/pci/hda/patch_realtek.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index aa76d1c88589..5ec95a7903b8 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -10502,7 +10502,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x3813, "Legion 7i 15IMHG05", ALC287_FIXUP_LEGION_15IMHG05_SPEAKERS), SND_PCI_QUIRK(0x17aa, 0x3818, "Lenovo C940 / Yoga Duet 7", ALC298_FIXUP_LENOVO_C940_DUET7), SND_PCI_QUIRK(0x17aa, 0x3819, "Lenovo 13s Gen2 ITL", ALC287_FIXUP_13S_GEN2_SPEAKERS), - SND_PCI_QUIRK(0x17aa, 0x3820, "Yoga Duet 7 13ITL6", ALC287_FIXUP_YOGA7_14ITL_SPEAKERS), + SND_PCI_QUIRK(0x17aa, 0x3820, "IdeaPad 330-17IKB 81DM", ALC269_FIXUP_ASPIRE_HEADSET_MIC), SND_PCI_QUIRK(0x17aa, 0x3824, "Legion Y9000X 2020", ALC285_FIXUP_LEGION_Y9000X_SPEAKERS), SND_PCI_QUIRK(0x17aa, 0x3827, "Ideapad S740", ALC285_FIXUP_IDEAPAD_S740_COEF), SND_PCI_QUIRK(0x17aa, 0x3834, "Lenovo IdeaPad Slim 9i 14ITL5", ALC287_FIXUP_YOGA7_14ITL_SPEAKERS), -- 2.33.8

1 0

[PATCH] ASoC: rt1318: Add RT1318 audio amplifier driver
by Jack Yu 05 Jun '24

05 Jun '24

This is the initial amplifier driver for rt1318. Signed-off-by: Jack Yu <jack.yu(a)realtek.com> --- include/sound/rt1318.h | 16 + sound/soc/codecs/Kconfig | 5 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/rt1318.c | 1387 +++++++++++++++++++++++++++++++++++++ sound/soc/codecs/rt1318.h | 342 +++++++++ 5 files changed, 1752 insertions(+) create mode 100644 include/sound/rt1318.h create mode 100644 sound/soc/codecs/rt1318.c create mode 100644 sound/soc/codecs/rt1318.h diff --git a/include/sound/rt1318.h b/include/sound/rt1318.h new file mode 100644 index 000000000000..fe6bff06036c --- /dev/null +++ b/include/sound/rt1318.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * linux/sound/rt1318.h -- Platform data for RT1318 + * + * Copyright 2024 Realtek Semiconductor Corp. + */ + +#ifndef __LINUX_SND_RT1318_H +#define __LINUX_SND_RT1318_H + +struct rt1318_platform_data { + unsigned int init_r0_l; + unsigned int init_r0_r; +}; + +#endif diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 4afc43d3f71f..d846bfbeeb79 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -221,6 +221,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_RT722_SDCA_SDW imply SND_SOC_RT1308_SDW imply SND_SOC_RT1316_SDW + imply SND_SOC_RT1318 imply SND_SOC_RT1318_SDW imply SND_SOC_RT9120 imply SND_SOC_RTQ9128 @@ -1570,6 +1571,10 @@ config SND_SOC_RT1316_SDW depends on SOUNDWIRE select REGMAP_SOUNDWIRE +config SND_SOC_RT1318 + tristate + depends on I2C + config SND_SOC_RT1318_SDW tristate "Realtek RT1318 Codec - SDW" depends on SOUNDWIRE diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index b4df22186e25..c5efae0aac72 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -221,6 +221,7 @@ snd-soc-rt1305-y := rt1305.o snd-soc-rt1308-y := rt1308.o snd-soc-rt1308-sdw-y := rt1308-sdw.o snd-soc-rt1316-sdw-y := rt1316-sdw.o +snd-soc-rt1318-y := rt1318.o snd-soc-rt1318-sdw-y := rt1318-sdw.o snd-soc-rt274-y := rt274.o snd-soc-rt286-y := rt286.o @@ -613,6 +614,7 @@ obj-$(CONFIG_SND_SOC_RT1305) += snd-soc-rt1305.o obj-$(CONFIG_SND_SOC_RT1308) += snd-soc-rt1308.o obj-$(CONFIG_SND_SOC_RT1308_SDW) += snd-soc-rt1308-sdw.o obj-$(CONFIG_SND_SOC_RT1316_SDW) += snd-soc-rt1316-sdw.o +obj-$(CONFIG_SND_SOC_RT1318) += snd-soc-rt1318.o obj-$(CONFIG_SND_SOC_RT1318_SDW) += snd-soc-rt1318-sdw.o obj-$(CONFIG_SND_SOC_RT274) += snd-soc-rt274.o obj-$(CONFIG_SND_SOC_RT286) += snd-soc-rt286.o diff --git a/sound/soc/codecs/rt1318.c b/sound/soc/codecs/rt1318.c new file mode 100644 index 000000000000..f9c6aceec2a6 --- /dev/null +++ b/sound/soc/codecs/rt1318.c @@ -0,0 +1,1387 @@ +// SPDX-License-Identifier: GPL-2.0-only +// +// rt1318.c -- RT1318 ALSA SoC audio amplifier driver +// Author: Jack Yu <jack.yu(a)realtek.com> +// +// Copyright(c) 2024 Realtek Semiconductor Corp. +// +// + +#include <linux/acpi.h> +#include <linux/fs.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/regmap.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/firmware.h> +#include <linux/gpio.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/initval.h> +#include <sound/tlv.h> +#include <sound/rt1318.h> + +#include "rt1318.h" + +struct rt1318_init_reg { + u32 reg; + u8 val; + u8 delay; +}; + +static struct rt1318_init_reg init_list[] = { + { 0x0000C000, 0x01, 0}, + { 0x0000F20D, 0x00, 0}, + { 0x0000F212, 0x3E, 0}, + { 0x0000C001, 0x02, 0}, + { 0x0000C003, 0x22, 0}, + { 0x0000C004, 0x44, 0}, + { 0x0000C005, 0x44, 0}, + { 0x0000C007, 0x64, 0}, + { 0x0000C00E, 0xE7, 0}, + { 0x0000F223, 0x7F, 0}, + { 0x0000F224, 0xDB, 0}, + { 0x0000F225, 0xEE, 0}, + { 0x0000F226, 0x3F, 0}, + { 0x0000F227, 0x0F, 0}, + { 0x0000F21A, 0x78, 0}, + { 0x0000F242, 0x3C, 0}, + { 0x0000C120, 0x40, 0}, + { 0x0000C125, 0x03, 0}, + { 0x0000C321, 0x0A, 0}, + { 0x0000C200, 0xD8, 0}, + { 0x0000C201, 0x27, 0}, + { 0x0000C202, 0x0F, 0}, + { 0x0000C400, 0x0E, 0}, + { 0x0000C401, 0x43, 0}, + { 0x0000C402, 0xE0, 0}, + { 0x0000C403, 0x00, 0}, + { 0x0000C404, 0x4C, 0}, + { 0x0000C406, 0x40, 0}, + { 0x0000C407, 0x02, 0}, + { 0x0000C408, 0x3F, 0}, + { 0x0000C300, 0x01, 0}, + { 0x0000C125, 0x03, 0}, + { 0x0000DF00, 0x10, 0}, + { 0x0000F20B, 0x2A, 0}, + { 0x0000DF5F, 0x01, 0}, + { 0x0000DF60, 0xA7, 0}, + { 0x0000C203, 0x84, 0}, + { 0x0000C206, 0x78, 0}, + { 0x0000F10A, 0x09, 0}, + { 0x0000F10B, 0x4C, 0}, + { 0x0000F104, 0xF4, 0}, + { 0x0000F105, 0x03, 0}, + { 0x0000F109, 0xE0, 0}, + { 0x0000F10B, 0x5C, 0}, + { 0x0000F104, 0xF4, 0}, + { 0x0000F105, 0x04, 0}, + { 0x0000F109, 0x65, 0}, + { 0x0000F10B, 0x5C, 0}, + { 0x0000F104, 0xF4, 0}, + { 0x0000F105, 0x02, 0}, + { 0x0000F109, 0x30, 0}, + { 0x0000F10B, 0x5C, 0}, + { 0x0000E706, 0x0F, 0}, + { 0x0000E707, 0x30, 0}, + { 0x0000E806, 0x0F, 0}, + { 0x0000E807, 0x30, 0}, + { 0x0000CE04, 0x03, 0}, + { 0x0000CE05, 0x5F, 0}, + { 0x0000CE06, 0xA2, 0}, + { 0x0000CE07, 0x6B, 0}, + { 0x0000CF04, 0x03, 0}, + { 0x0000CF05, 0x5F, 0}, + { 0x0000CF06, 0xA2, 0}, + { 0x0000CF07, 0x6B, 0}, + { 0x0000CE60, 0xE3, 0}, + { 0x0000C130, 0x51, 0}, + { 0x0000E000, 0xA8, 0}, + { 0x0000F102, 0x00, 0}, + { 0x0000F103, 0x00, 0}, + { 0x0000F104, 0xF5, 0}, + { 0x0000F105, 0x23, 0}, + { 0x0000F109, 0x04, 0}, + { 0x0000F10A, 0x0B, 0}, + { 0x0000F10B, 0x4C, 0}, + { 0x0000F10B, 0x5C, 0}, + { 0x41001888, 0x00, 0}, + { 0x0000C121, 0x0B, 100}, + { 0x0000F102, 0x00, 0}, + { 0x0000F103, 0x00, 0}, + { 0x0000F104, 0xF5, 0}, + { 0x0000F105, 0x23, 0}, + { 0x0000F109, 0x00, 0}, + { 0x0000F10A, 0x0B, 0}, + { 0x0000F10B, 0x4C, 0}, + { 0x0000F10B, 0x5C, 0}, + { 0x0000F800, 0x20, 0}, + { 0x0000CA00, 0x80, 0}, + { 0x0000CA10, 0x00, 0}, + { 0x0000CA02, 0x78, 0}, + { 0x0000CA12, 0x78, 0}, + { 0x0000ED00, 0x90, 0}, + { 0x0000E604, 0x00, 0}, + { 0x0000DB00, 0x0C, 0}, + { 0x0000DD00, 0x0C, 0}, + { 0x0000DC19, 0x00, 0}, + { 0x0000DC1A, 0x6A, 0}, + { 0x0000DC1B, 0xAA, 0}, + { 0x0000DC1C, 0xAB, 0}, + { 0x0000DC1D, 0x00, 0}, + { 0x0000DC1E, 0x16, 0}, + { 0x0000DC1F, 0xDB, 0}, + { 0x0000DC20, 0x6D, 0}, + { 0x0000DE19, 0x00, 0}, + { 0x0000DE1A, 0x6A, 0}, + { 0x0000DE1B, 0xAA, 0}, + { 0x0000DE1C, 0xAB, 0}, + { 0x0000DE1D, 0x00, 0}, + { 0x0000DE1E, 0x16, 0}, + { 0x0000DE1F, 0xDB, 0}, + { 0x0000DE20, 0x6D, 0}, + { 0x0000DB32, 0x00, 0}, + { 0x0000DD32, 0x00, 0}, + { 0x0000DB33, 0x0A, 0}, + { 0x0000DD33, 0x0A, 0}, + { 0x0000DB34, 0x1A, 0}, + { 0x0000DD34, 0x1A, 0}, + { 0x0000DB15, 0xEF, 0}, + { 0x0000DD15, 0xEF, 0}, + { 0x0000DB17, 0xEF, 0}, + { 0x0000DD17, 0xEF, 0}, + { 0x0000DB94, 0x70, 0}, + { 0x0000DD94, 0x70, 0}, + { 0x0000DB19, 0x40, 0}, + { 0x0000DD19, 0x40, 0}, + { 0x0000DB12, 0xC0, 0}, + { 0x0000DD12, 0xC0, 0}, + { 0x0000DB00, 0x4C, 0}, + { 0x0000DB04, 0x05, 0}, + { 0x0000DB05, 0x03, 0}, + { 0x0000DD04, 0x05, 0}, + { 0x0000DD05, 0x03, 0}, + { 0x0000DBBB, 0x09, 0}, + { 0x0000DBBC, 0x30, 0}, + { 0x0000DBBD, 0xF0, 0}, + { 0x0000DBBE, 0xF1, 0}, + { 0x0000DDBB, 0x09, 0}, + { 0x0000DDBC, 0x30, 0}, + { 0x0000DDBD, 0xF0, 0}, + { 0x0000DDBE, 0xF1, 0}, + { 0x0000DB01, 0x79, 0}, + { 0x0000DD01, 0x79, 0}, + { 0x0000DB08, 0x40, 0}, + { 0x0000DD08, 0x40, 0}, + { 0x0000DC52, 0xEF, 0}, + { 0x0000DE52, 0xEF, 0}, + { 0x0000DB00, 0xCC, 0}, + { 0x0000CC2C, 0x00, 0}, + { 0x0000CC2D, 0x2A, 0}, + { 0x0000CC2E, 0x83, 0}, + { 0x0000CC2F, 0xA8, 0}, + { 0x0000CD2C, 0x00, 0}, + { 0x0000CD2D, 0x2A, 0}, + { 0x0000CD2E, 0x83, 0}, + { 0x0000CD2F, 0xA8, 0}, + { 0x0000CC24, 0x00, 0}, + { 0x0000CC25, 0x51, 0}, + { 0x0000CC26, 0xEB, 0}, + { 0x0000CC27, 0x85, 0}, + { 0x0000CD24, 0x00, 0}, + { 0x0000CD25, 0x51, 0}, + { 0x0000CD26, 0xEB, 0}, + { 0x0000CD27, 0x85, 0}, + { 0x0000CC20, 0x00, 0}, + { 0x0000CC21, 0x00, 0}, + { 0x0000CC22, 0x43, 0}, + { 0x0000CD20, 0x00, 0}, + { 0x0000CD21, 0x00, 0}, + { 0x0000CD22, 0x43, 0}, + { 0x0000CC16, 0x0F, 0}, + { 0x0000CC17, 0x00, 0}, + { 0x0000CD16, 0x0F, 0}, + { 0x0000CD17, 0x00, 0}, + { 0x0000CC29, 0x5D, 0}, + { 0x0000CC2A, 0xC0, 0}, + { 0x0000CD29, 0x5D, 0}, + { 0x0000CD2A, 0xC0, 0}, + { 0x0000CC31, 0x20, 0}, + { 0x0000CC32, 0x00, 0}, + { 0x0000CC33, 0x00, 0}, + { 0x0000CC34, 0x00, 0}, + { 0x0000CD31, 0x20, 0}, + { 0x0000CD32, 0x00, 0}, + { 0x0000CD33, 0x00, 0}, + { 0x0000CD34, 0x00, 0}, + { 0x0000CC36, 0x79, 0}, + { 0x0000CC37, 0x99, 0}, + { 0x0000CC38, 0x99, 0}, + { 0x0000CC39, 0x99, 0}, + { 0x0000CD36, 0x79, 0}, + { 0x0000CD37, 0x99, 0}, + { 0x0000CD38, 0x99, 0}, + { 0x0000CD39, 0x99, 0}, + { 0x0000CC09, 0x00, 0}, + { 0x0000CC0A, 0x07, 0}, + { 0x0000CC0B, 0x5F, 0}, + { 0x0000CC0C, 0x6F, 0}, + { 0x0000CD09, 0x00, 0}, + { 0x0000CD0A, 0x07, 0}, + { 0x0000CD0B, 0x5F, 0}, + { 0x0000CD0C, 0x6F, 0}, + { 0x0000CC0E, 0x00, 0}, + { 0x0000CC0F, 0x03, 0}, + { 0x0000CC10, 0xAF, 0}, + { 0x0000CC11, 0xB7, 0}, + { 0x0000CD0E, 0x00, 0}, + { 0x0000CD0F, 0x03, 0}, + { 0x0000CD10, 0xAF, 0}, + { 0x0000CD11, 0xB7, 0}, + { 0x0000CCD6, 0x00, 0}, + { 0x0000CCD7, 0x03, 0}, + { 0x0000CDD6, 0x00, 0}, + { 0x0000CDD7, 0x03, 0}, + { 0x0000CCD8, 0x00, 0}, + { 0x0000CCD9, 0x03, 0}, + { 0x0000CDD8, 0x00, 0}, + { 0x0000CDD9, 0x03, 0}, + { 0x0000CCDA, 0x00, 0}, + { 0x0000CCDB, 0x03, 0}, + { 0x0000CDDA, 0x00, 0}, + { 0x0000CDDB, 0x03, 0}, + { 0x0000C320, 0x20, 0}, + { 0x0000C203, 0x9C, 0}, +}; +#define rt1318_INIT_REG_LEN ARRAY_SIZE(init_list) + +static int rt1318_reg_init(struct snd_soc_component *component) +{ + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + int i; + + for (i = 0; i < rt1318_INIT_REG_LEN; i++) { + regmap_write(rt1318->regmap, init_list[i].reg, init_list[i].val); + mdelay(init_list[i].delay); + } + + return 0; +} + +static const struct reg_default rt1318_reg[] = { + { 0xc000, 0x00 }, + { 0xc001, 0x43 }, + { 0xc003, 0x22 }, + { 0xc004, 0x44 }, + { 0xc005, 0x44 }, + { 0xc006, 0x33 }, + { 0xc007, 0x64 }, + { 0xc008, 0x05 }, + { 0xc00a, 0xfc }, + { 0xc00b, 0x0f }, + { 0xc00c, 0x0e }, + { 0xc00d, 0xef }, + { 0xc00e, 0xe5 }, + { 0xc00f, 0xff }, + { 0xc120, 0xc0 }, + { 0xc121, 0x00 }, + { 0xc122, 0x00 }, + { 0xc123, 0x14 }, + { 0xc125, 0x00 }, + { 0xc130, 0x59 }, + { 0xc200, 0x00 }, + { 0xc201, 0x00 }, + { 0xc202, 0x00 }, + { 0xc203, 0x04 }, + { 0xc204, 0x00 }, + { 0xc205, 0x00 }, + { 0xc206, 0x68 }, + { 0xc207, 0x70 }, + { 0xc208, 0x00 }, + { 0xc20a, 0x00 }, + { 0xc20b, 0x01 }, + { 0xc20c, 0x7f }, + { 0xc20d, 0x01 }, + { 0xc20e, 0x7f }, + { 0xc300, 0x00 }, + { 0xc301, 0x00 }, + { 0xc303, 0x80 }, + { 0xc320, 0x00 }, + { 0xc321, 0x09 }, + { 0xc322, 0x02 }, + { 0xc400, 0x00 }, + { 0xc401, 0x00 }, + { 0xc402, 0x00 }, + { 0xc403, 0x00 }, + { 0xc404, 0x00 }, + { 0xc405, 0x00 }, + { 0xc406, 0x00 }, + { 0xc407, 0x00 }, + { 0xc408, 0x00 }, + { 0xc410, 0x04 }, + { 0xc430, 0x00 }, + { 0xc431, 0x00 }, + { 0xca00, 0x10 }, + { 0xca01, 0x00 }, + { 0xca02, 0x0b }, + { 0xca10, 0x10 }, + { 0xca11, 0x00 }, + { 0xca12, 0x0b }, + { 0xce04, 0x08 }, + { 0xce05, 0x00 }, + { 0xce06, 0x00 }, + { 0xce07, 0x00 }, + { 0xce60, 0x63 }, + { 0xcf04, 0x08 }, + { 0xcf05, 0x00 }, + { 0xcf06, 0x00 }, + { 0xcf07, 0x00 }, + { 0xdb00, 0x00 }, + { 0xdb08, 0x40 }, + { 0xdb12, 0x00 }, + { 0xdb35, 0x00 }, + { 0xdbb5, 0x00 }, + { 0xdbb6, 0x40 }, + { 0xdbb7, 0x00 }, + { 0xdbb8, 0x00 }, + { 0xdbc5, 0x00 }, + { 0xdbc6, 0x00 }, + { 0xdbc7, 0x00 }, + { 0xdbc8, 0x00 }, + { 0xdd08, 0x40 }, + { 0xdd12, 0x00 }, + { 0xdd35, 0x00 }, + { 0xddb5, 0x00 }, + { 0xddb6, 0x40 }, + { 0xddb7, 0x00 }, + { 0xddb8, 0x00 }, + { 0xddc5, 0x00 }, + { 0xddc6, 0x00 }, + { 0xddc7, 0x00 }, + { 0xddc8, 0x00 }, + { 0xdd93, 0x00 }, + { 0xdd94, 0x64 }, + { 0xdf00, 0x00 }, + { 0xdf5f, 0x00 }, + { 0xdf60, 0x00 }, + { 0xe000, 0x08 }, + { 0xe300, 0xa0 }, + { 0xe400, 0x22 }, + { 0xe706, 0x2f }, + { 0xe707, 0x2f }, + { 0xe806, 0x2f }, + { 0xe807, 0x2f }, + { 0xea00, 0x43 }, + { 0xed00, 0x80 }, + { 0xed01, 0x0f }, + { 0xed02, 0xff }, + { 0xed03, 0x00 }, + { 0xed04, 0x00 }, + { 0xed05, 0x0f }, + { 0xed06, 0xff }, + { 0xf010, 0x10 }, + { 0xf011, 0xec }, + { 0xf012, 0x68 }, + { 0xf013, 0x21 }, + { 0xf102, 0x00 }, + { 0xf103, 0x00 }, + { 0xf104, 0x00 }, + { 0xf105, 0x00 }, + { 0xf106, 0x00 }, + { 0xf107, 0x00 }, + { 0xf108, 0x00 }, + { 0xf109, 0x00 }, + { 0xf10a, 0x03 }, + { 0xf10b, 0x40 }, + { 0xf20b, 0x28 }, + { 0xf20d, 0x00 }, + { 0xf212, 0x00 }, + { 0xf21a, 0x00 }, + { 0xf223, 0x40 }, + { 0xf224, 0x00 }, + { 0xf225, 0x00 }, + { 0xf226, 0x00 }, + { 0xf227, 0x00 }, + { 0xf242, 0x0c }, + { 0xf800, 0x00 }, + { 0xf801, 0x12 }, + { 0xf802, 0xe0 }, + { 0xf803, 0x2f }, + { 0xf804, 0x00 }, + { 0xf805, 0x00 }, + { 0xf806, 0x07 }, + { 0xf807, 0xff }, +}; + +static bool rt1318_volatile_register(struct device *dev, unsigned int reg) +{ + switch (reg) { + case 0xc000: + case 0xc301: + case 0xc410: + case 0xc430 ... 0xc431: + case 0xdb06: + case 0xdb12: + case 0xdb1d ... 0xdb1f: + case 0xdb35: + case 0xdb37: + case 0xdb8a ... 0xdb92: + case 0xdbc5 ... 0xdbc8: + case 0xdc2b ... 0xdc49: + case 0xdd0b: + case 0xdd12: + case 0xdd1d ... 0xdd1f: + case 0xdd35: + case 0xdd8a ... 0xdd92: + case 0xddc5 ... 0xddc8: + case 0xde2b ... 0xde44: + case 0xdf4a ... 0xdf55: + case 0xe224 ... 0xe23b: + case 0xea01: + case 0xebc5: + case 0xebc8: + case 0xebcb ... 0xebcc: + case 0xed03 ... 0xed06: + case 0xf010 ... 0xf014: + return true; + + default: + return false; + } +} + +static bool rt1318_readable_register(struct device *dev, unsigned int reg) +{ + switch (reg) { + case 0xc000 ... 0xc00f: + case 0xc120 ... 0xc130: + case 0xc200 ... 0xc20e: + case 0xc300 ... 0xc303: + case 0xc320 ... 0xc322: + case 0xc400 ... 0xc408: + case 0xc430 ... 0xc431: + case 0xca00 ... 0xca02: + case 0xca10 ... 0xca12: + case 0xcb00 ... 0xcb0b: + case 0xcc00 ... 0xcce5: + case 0xcd00 ... 0xcde5: + case 0xce00 ... 0xce6a: + case 0xcf00 ... 0xcf53: + case 0xd000 ... 0xd0cc: + case 0xd100 ... 0xd1b9: + case 0xdb00 ... 0xdc53: + case 0xdd00 ... 0xde53: + case 0xdf00 ... 0xdf6b: + case 0xe000: + case 0xe300: + case 0xe400: + case 0xe706 ... 0xe707: + case 0xe806 ... 0xe807: + case 0xea00: + case 0xeb00 ... 0xebcc: + case 0xec00 ... 0xecb9: + case 0xed00 ... 0xed06: + case 0xf010 ... 0xf014: + case 0xf102 ... 0xf10b: + case 0xf20b: + case 0xf20d ... 0xf242: + case 0xf800 ... 0xf807: + return true; + default: + return false; + } +} + +static int rt1318_dac_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + regmap_update_bits(rt1318->regmap, RT1318_PWR_STA1, + RT1318_PDB_CTRL_MASK, RT1318_PDB_CTRL_HIGH); + break; + + case SND_SOC_DAPM_POST_PMD: + regmap_update_bits(rt1318->regmap, RT1318_PWR_STA1, + RT1318_PDB_CTRL_MASK, RT1318_PDB_CTRL_LOW); + break; + + default: + break; + } + return 0; +} + +static int rt1318_init_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + + rt1318->rt1318_init = ucontrol->value.integer.value[0]; + + if (rt1318->rt1318_init) + rt1318_reg_init(component); + + return 0; +} + +static int rt1318_init_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + + ucontrol->value.integer.value[0] = rt1318->rt1318_init; + + return 0; +} + +static int rt1318_dvol_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + + rt1318->rt1318_dvol = ucontrol->value.integer.value[0]; + + if (rt1318->rt1318_dvol <= RT1318_DVOL_STEP) { + regmap_write(rt1318->regmap, RT1318_DA_VOL_L_8, rt1318->rt1318_dvol >> 8); + regmap_write(rt1318->regmap, RT1318_DA_VOL_L_1_7, rt1318->rt1318_dvol & 0xff); + regmap_write(rt1318->regmap, RT1318_DA_VOL_R_8, rt1318->rt1318_dvol >> 8); + regmap_write(rt1318->regmap, RT1318_DA_VOL_R_1_7, rt1318->rt1318_dvol & 0xff); + } else { + rt1318->rt1318_dvol = RT1318_DVOL_STEP; + dev_err(component->dev, "Unsupported volume gain\n"); + } + + return 0; +} + +static int rt1318_dvol_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + + ucontrol->value.integer.value[0] = rt1318->rt1318_dvol; + + return 0; +} + +static const struct snd_kcontrol_new rt1318_snd_controls[] = { + SOC_SINGLE_EXT("rt1318 digital volume", SND_SOC_NOPM, 0, 383, 0, + rt1318_dvol_get, rt1318_dvol_put), + SOC_SINGLE_EXT("rt1318 init", SND_SOC_NOPM, 0, 1, 0, + rt1318_init_get, rt1318_init_put), +}; + +static const struct snd_soc_dapm_widget rt1318_dapm_widgets[] = { + /* Audio Interface */ + SND_SOC_DAPM_AIF_IN("AIF1RX", "AIF1 Playback", 0, SND_SOC_NOPM, 0, 0), + /* DACs */ + SND_SOC_DAPM_DAC_E("DAC", NULL, SND_SOC_NOPM, 0, 0, + rt1318_dac_event, SND_SOC_DAPM_PRE_PMU | + SND_SOC_DAPM_POST_PMD), + /* Output Lines */ + SND_SOC_DAPM_OUTPUT("Amp"), +}; + +static const struct snd_soc_dapm_route rt1318_dapm_routes[] = { + {"DAC", NULL, "AIF1RX"}, + {"Amp", NULL, "DAC"}, +}; + +static int rt1318_get_clk_info(int sclk, int rate) +{ + int i, pd[] = {1, 2, 4, 8, 16, 24}; + + if (sclk <= 0 || rate <= 0) + return -EINVAL; + + rate = rate << 8; + for (i = 0; i < ARRAY_SIZE(pd); i++) + if (sclk == rate * pd[i]) + return i; + + return -EINVAL; +} + +static int rt1318_clk_ip_info(struct snd_soc_component *component, int lrclk) +{ + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + + if (lrclk == RT1318_LRCLK_48000 || lrclk == RT1318_LRCLK_44100 || + lrclk == RT1318_LRCLK_16000) + regmap_update_bits(rt1318->regmap, RT1318_SRC_TCON, + RT1318_SRCIN_F12288_MASK | RT1318_SRCIN_DACLK_MASK, + RT1318_SRCIN_TCON4 | RT1318_DACLK_TCON4); + else if (lrclk == RT1318_LRCLK_96000) + regmap_update_bits(rt1318->regmap, RT1318_SRC_TCON, + RT1318_SRCIN_F12288_MASK | RT1318_SRCIN_DACLK_MASK, + RT1318_SRCIN_TCON4 | RT1318_DACLK_TCON2); + else if (lrclk == RT1318_LRCLK_192000) + regmap_update_bits(rt1318->regmap, RT1318_SRC_TCON, + RT1318_SRCIN_F12288_MASK | RT1318_SRCIN_DACLK_MASK, + RT1318_SRCIN_TCON4 | RT1318_DACLK_TCON1); + else + return -EINVAL; + + return 0; +} + +static int rt1318_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + int data_len = 0, ch_len = 0; + int pre_div, ret; + + rt1318->lrck = params_rate(params); + pre_div = rt1318_get_clk_info(rt1318->sysclk, rt1318->lrck); + if (pre_div < 0) { + dev_err(component->dev, "Unsupported clock setting\n"); + return -EINVAL; + } + ret = rt1318_clk_ip_info(component, rt1318->lrck); + if (ret < 0) { + dev_err(component->dev, "Unsupported clock setting\n"); + return -EINVAL; + } + + switch (params_width(params)) { + case 16: + break; + case 20: + data_len = RT1318_I2S_DL_20; + ch_len = RT1318_I2S_DL_20; + break; + case 24: + data_len = RT1318_I2S_DL_24; + ch_len = RT1318_I2S_DL_24; + break; + case 32: + data_len = RT1318_I2S_DL_32; + ch_len = RT1318_I2S_DL_32; + break; + case 8: + data_len = RT1318_I2S_DL_8; + ch_len = RT1318_I2S_DL_8; + break; + default: + return -EINVAL; + } + + regmap_update_bits(rt1318->regmap, RT1318_CLK2, + RT1318_DIV_AP_MASK | RT1318_DIV_DAMOD_MASK, + pre_div << RT1318_DIV_AP_SFT | + pre_div << RT1318_DIV_DAMOD_SFT); + regmap_update_bits(rt1318->regmap, RT1318_CLK3, + RT1318_AD_STO1_MASK | RT1318_AD_STO2_MASK, + pre_div << RT1318_AD_STO1_SFT | + pre_div << RT1318_AD_STO2_SFT); + regmap_update_bits(rt1318->regmap, RT1318_CLK4, + RT1318_AD_ANA_STO1_MASK | RT1318_AD_ANA_STO2_MASK, + pre_div << RT1318_AD_ANA_STO1_SFT | + pre_div << RT1318_AD_ANA_STO2_SFT); + regmap_update_bits(rt1318->regmap, RT1318_CLK5, + RT1318_DIV_FIFO_IN_MASK | RT1318_DIV_FIFO_OUT_MASK, + pre_div << RT1318_DIV_FIFO_IN_SFT | + pre_div << RT1318_DIV_FIFO_OUT_SFT); + regmap_update_bits(rt1318->regmap, RT1318_CLK6, + RT1318_DIV_NLMS_MASK | RT1318_DIV_AD_MONO_MASK | + RT1318_DIV_POST_G_MASK, pre_div << RT1318_DIV_NLMS_SFT | + pre_div << RT1318_DIV_AD_MONO_SFT | + pre_div << RT1318_DIV_POST_G_SFT); + + regmap_update_bits(rt1318->regmap, RT1318_TDM_CTRL2, + RT1318_I2S_DL_MASK, data_len << RT1318_I2S_DL_SFT); + regmap_update_bits(rt1318->regmap, RT1318_TDM_CTRL3, + RT1318_I2S_TX_CHL_MASK | RT1318_I2S_RX_CHL_MASK, + ch_len << RT1318_I2S_TX_CHL_SFT | + ch_len << RT1318_I2S_RX_CHL_SFT); + + return 0; +} + +static int rt1318_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt) +{ + struct snd_soc_component *component = dai->component; + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + unsigned int reg_val = 0, reg_val2 = 0; + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_NF: + reg_val2 |= RT1318_TDM_BCLK_INV; + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + break; + + case SND_SOC_DAIFMT_LEFT_J: + reg_val |= RT1318_FMT_LEFT_J; + break; + + case SND_SOC_DAIFMT_DSP_A: + reg_val |= RT1318_FMT_PCM_A_R; + break; + + case SND_SOC_DAIFMT_DSP_B: + reg_val |= RT1318_FMT_PCM_B_R; + break; + + default: + return -EINVAL; + } + + regmap_update_bits(rt1318->regmap, RT1318_TDM_CTRL1, + RT1318_I2S_FMT_MASK, reg_val); + regmap_update_bits(rt1318->regmap, RT1318_TDM_CTRL1, + RT1318_TDM_BCLK_MASK, reg_val2); + + return 0; +} + +static int rt1318_set_dai_sysclk(struct snd_soc_dai *dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_component *component = dai->component; + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + int reg_val = 0; + + if (freq == rt1318->sysclk && clk_id == rt1318->sysclk_src) + return 0; + + switch (clk_id) { + case RT1318_SCLK_S_BCLK: + reg_val |= RT1318_SYSCLK_BCLK; + break; + case RT1318_SCLK_S_SDW: + reg_val |= RT1318_SYSCLK_SDW; + break; + case RT1318_SCLK_S_PLL2F: + reg_val |= RT1318_SYSCLK_PLL2F; + break; + case RT1318_SCLK_S_PLL2B: + reg_val |= RT1318_SYSCLK_PLL2B; + break; + case RT1318_SCLK_S_MCLK: + reg_val |= RT1318_SYSCLK_MCLK; + break; + case RT1318_SCLK_S_RC0: + reg_val |= RT1318_SYSCLK_RC1; + break; + case RT1318_SCLK_S_RC1: + reg_val |= RT1318_SYSCLK_RC2; + break; + case RT1318_SCLK_S_RC2: + reg_val |= RT1318_SYSCLK_RC3; + break; + default: + dev_err(component->dev, "Invalid clock id (%d)\n", clk_id); + return -EINVAL; + } + + rt1318->sysclk = freq; + rt1318->sysclk_src = clk_id; + dev_dbg(dai->dev, "Sysclk is %dHz and clock id is %d\n", freq, clk_id); + regmap_update_bits(rt1318->regmap, RT1318_CLK1, + RT1318_SYSCLK_SEL_MASK, reg_val); + + return 0; +} + +static const struct pll_calc_map pll_preset_table[] = { + {512000, 4096000, 22, 190, 0, true, false}, + {1024000, 4096000, 22, 94, 0, true, false}, + {1024000, 16384000, 4, 190, 0, true, false}, + {1411200, 11289600, 6, 62, 0, true, false}, + {1536000, 12288000, 6, 62, 0, true, false}, + {2822400, 11289600, 6, 62, 0, true, false}, + {2822400, 45158400, 0, 62, 0, true, false}, + {2822400, 49152000, 0, 62, 0, true, false}, + {3072000, 12288000, 6, 62, 0, true, false}, + {3072000, 24576000, 2, 62, 0, true, false}, + {3072000, 49152000, 0, 62, 0, true, false}, + {6144000, 24576000, 2, 94, 4, false, false}, + {6144000, 49152000, 0, 30, 0, true, false}, + {6144000, 98304000, 0, 94, 4, false, true}, + {12288000, 49152000, 0, 62, 6, false, false}, +}; + +int rt1318_pll_calc(const unsigned int freq_in, + const unsigned int freq_out, struct rt1318_pll_code *pll_code) +{ + int max_n = RT1318_PLL_N_MAX, max_m = RT1318_PLL_M_MAX; + int i, k, red, n_t, pll_out, in_t, out_t; + int n = 0, m = 0, m_t = 0; + int red_t = abs(freq_out - freq_in); + bool m_bypass = false, k_bypass = false; + + if (RT1318_PLL_INP_MAX < freq_in || RT1318_PLL_INP_MIN > freq_in) + return -EINVAL; + + for (i = 0; i < ARRAY_SIZE(pll_preset_table); i++) { + if (freq_in == pll_preset_table[i].pll_in && + freq_out == pll_preset_table[i].pll_out) { + k = pll_preset_table[i].k; + m = pll_preset_table[i].m; + n = pll_preset_table[i].n; + m_bypass = pll_preset_table[i].m_bp; + k_bypass = pll_preset_table[i].k_bp; + goto code_find; + } + } + + k = 100000000 / freq_out - 2; + if (k > RT1318_PLL_K_MAX) + k = RT1318_PLL_K_MAX; + if (k < 0) { + k = 0; + k_bypass = true; + } + for (n_t = 0; n_t <= max_n; n_t++) { + in_t = freq_in / (k_bypass ? 1 : (k + 2)); + pll_out = freq_out / (n_t + 2); + if (in_t < 0) + continue; + if (in_t == pll_out) { + m_bypass = true; + n = n_t; + goto code_find; + } + red = abs(in_t - pll_out); + if (red < red_t) { + m_bypass = true; + n = n_t; + m = m_t; + if (red == 0) + goto code_find; + red_t = red; + } + for (m_t = 0; m_t <= max_m; m_t++) { + out_t = in_t / (m_t + 2); + red = abs(out_t - pll_out); + if (red < red_t) { + m_bypass = false; + n = n_t; + m = m_t; + if (red == 0) + goto code_find; + red_t = red; + } + } + } + pr_debug("Only get approximation about PLL\n"); + +code_find: + + pll_code->m_bp = m_bypass; + pll_code->k_bp = k_bypass; + pll_code->m_code = m; + pll_code->n_code = n; + pll_code->k_code = k; + return 0; +} + +static int rt1318_set_dai_pll(struct snd_soc_dai *dai, int pll_id, int source, + unsigned int freq_in, unsigned int freq_out) +{ + struct snd_soc_component *component = dai->component; + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + struct rt1318_pll_code pll_code; + int ret; + + if (!freq_in || !freq_out) { + dev_dbg(component->dev, "PLL disabled\n"); + rt1318->pll_in = 0; + rt1318->pll_out = 0; + return 0; + } + + if (source == rt1318->pll_src && freq_in == rt1318->pll_in && + freq_out == rt1318->pll_out) + return 0; + + switch (source) { + case RT1318_PLL_S_BCLK0: + regmap_update_bits(rt1318->regmap, RT1318_CLK1, + RT1318_PLLIN_MASK, RT1318_PLLIN_BCLK0); + break; + case RT1318_PLL_S_BCLK1: + regmap_update_bits(rt1318->regmap, RT1318_CLK1, + RT1318_PLLIN_MASK, RT1318_PLLIN_BCLK1); + break; + case RT1318_PLL_S_RC: + regmap_update_bits(rt1318->regmap, RT1318_CLK1, + RT1318_PLLIN_MASK, RT1318_PLLIN_RC); + break; + case RT1318_PLL_S_MCLK: + regmap_update_bits(rt1318->regmap, RT1318_CLK1, + RT1318_PLLIN_MASK, RT1318_PLLIN_MCLK); + break; + case RT1318_PLL_S_SDW_IN_PLL: + regmap_update_bits(rt1318->regmap, RT1318_CLK1, + RT1318_PLLIN_MASK, RT1318_PLLIN_SDW1); + break; + case RT1318_PLL_S_SDW_0: + regmap_update_bits(rt1318->regmap, RT1318_CLK1, + RT1318_PLLIN_MASK, RT1318_PLLIN_SDW2); + break; + case RT1318_PLL_S_SDW_1: + regmap_update_bits(rt1318->regmap, RT1318_CLK1, + RT1318_PLLIN_MASK, RT1318_PLLIN_SDW3); + break; + case RT1318_PLL_S_SDW_2: + regmap_update_bits(rt1318->regmap, RT1318_CLK1, + RT1318_PLLIN_MASK, RT1318_PLLIN_SDW4); + break; + default: + dev_err(component->dev, "Unknown PLL source %d\n", source); + return -EINVAL; + } + + ret = rt1318_pll_calc(freq_in, freq_out, &pll_code); + if (ret < 0) { + dev_err(component->dev, "Unsupport input clock %d\n", freq_in); + return ret; + } + + dev_dbg(component->dev, "bypass=%d m=%d n=%d k=%d\n", + pll_code.m_bp, (pll_code.m_bp ? 0 : pll_code.m_code), + pll_code.n_code, pll_code.k_code); + + regmap_update_bits(rt1318->regmap, RT1318_PLL1_K, + RT1318_K_PLL1_MASK, pll_code.k_code); + regmap_update_bits(rt1318->regmap, RT1318_PLL1_M, + RT1318_M_PLL1_MASK, (pll_code.m_bp ? 0 : pll_code.m_code)); + regmap_update_bits(rt1318->regmap, RT1318_PLL1_N_8, + RT1318_N_8_PLL1_MASK, pll_code.n_code >> 8); + regmap_update_bits(rt1318->regmap, RT1318_PLL1_N_7_0, + RT1318_N_7_0_PLL1_MASK, pll_code.n_code); + + rt1318->pll_in = freq_in; + rt1318->pll_out = freq_out; + rt1318->pll_src = source; + + return 0; +} + +static int rt1318_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask, + unsigned int rx_mask, int slots, int slot_width) +{ + struct snd_soc_component *component = dai->component; + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + unsigned int cn = 0, cl = 0, rx_slotnum; + int ret = 0, first_bit; + + switch (slots) { + case 4: + cn |= RT1318_I2S_CH_TX_4CH; + cn |= RT1318_I2S_CH_RX_4CH; + break; + case 6: + cn |= RT1318_I2S_CH_TX_6CH; + cn |= RT1318_I2S_CH_RX_6CH; + break; + case 8: + cn |= RT1318_I2S_CH_TX_8CH; + cn |= RT1318_I2S_CH_RX_8CH; + break; + case 2: + break; + default: + return -EINVAL; + } + + switch (slot_width) { + case 20: + cl |= RT1318_I2S_TX_CHL_20; + cl |= RT1318_I2S_RX_CHL_20; + break; + case 24: + cl |= RT1318_I2S_TX_CHL_24; + cl |= RT1318_I2S_RX_CHL_24; + break; + case 32: + cl |= RT1318_I2S_TX_CHL_32; + cl |= RT1318_I2S_RX_CHL_32; + break; + case 8: + cl |= RT1318_I2S_TX_CHL_8; + cl |= RT1318_I2S_RX_CHL_8; + break; + case 16: + break; + default: + return -EINVAL; + } + + /* Rx slot configuration */ + rx_slotnum = hweight_long(rx_mask); + if (rx_slotnum != 1) { + ret = -EINVAL; + dev_err(component->dev, "too many rx slots or zero slot\n"); + goto _set_tdm_err_; + } + + first_bit = __ffs(rx_mask); + switch (first_bit) { + case 0: + case 2: + case 4: + case 6: + regmap_update_bits(rt1318->regmap, + RT1318_TDM_CTRL9, + RT1318_TDM_I2S_TX_L_DAC1_1_MASK | + RT1318_TDM_I2S_TX_R_DAC1_1_MASK, + (first_bit << RT1318_TDM_I2S_TX_L_DAC1_1_SFT) | + ((first_bit + 1) << RT1318_TDM_I2S_TX_R_DAC1_1_SFT)); + break; + case 1: + case 3: + case 5: + case 7: + regmap_update_bits(rt1318->regmap, + RT1318_TDM_CTRL9, + RT1318_TDM_I2S_TX_L_DAC1_1_MASK | + RT1318_TDM_I2S_TX_R_DAC1_1_MASK, + ((first_bit - 1) << RT1318_TDM_I2S_TX_L_DAC1_1_SFT) | + (first_bit << RT1318_TDM_I2S_TX_R_DAC1_1_SFT)); + break; + default: + ret = -EINVAL; + goto _set_tdm_err_; + } + + regmap_update_bits(rt1318->regmap, RT1318_TDM_CTRL2, + RT1318_I2S_CH_TX_MASK | RT1318_I2S_CH_RX_MASK, cn); + regmap_update_bits(rt1318->regmap, RT1318_TDM_CTRL3, + RT1318_I2S_TX_CHL_MASK | RT1318_I2S_RX_CHL_MASK, cl); + +_set_tdm_err_: + return ret; +} + +static int rt1318_probe(struct snd_soc_component *component) +{ + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + + rt1318->component = component; + + rt1318_reg_init(component); + schedule_work(&rt1318->cali_work); + rt1318->rt1318_dvol = RT1318_DVOL_STEP; + + return 0; +} + +static void rt1318_remove(struct snd_soc_component *component) +{ + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + + cancel_work_sync(&rt1318->cali_work); +} + +#ifdef CONFIG_PM +static int rt1318_suspend(struct snd_soc_component *component) +{ + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + + regcache_cache_only(rt1318->regmap, true); + regcache_mark_dirty(rt1318->regmap); + return 0; +} + +static int rt1318_resume(struct snd_soc_component *component) +{ + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + + regcache_cache_only(rt1318->regmap, false); + regcache_sync(rt1318->regmap); + return 0; +} +#else +#define rt1318_suspend NULL +#define rt1318_resume NULL +#endif + +#define RT1318_STEREO_RATES SNDRV_PCM_RATE_8000_192000 +#define RT1318_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S8) + +static const struct snd_soc_dai_ops rt1318_aif_dai_ops = { + .hw_params = rt1318_hw_params, + .set_fmt = rt1318_set_dai_fmt, + .set_sysclk = rt1318_set_dai_sysclk, + .set_pll = rt1318_set_dai_pll, + .set_tdm_slot = rt1318_set_tdm_slot, +}; + +static struct snd_soc_dai_driver rt1318_dai[] = { + { + .name = "rt1318-aif", + .id = 0, + .playback = { + .stream_name = "AIF1 Playback", + .channels_min = 1, + .channels_max = 2, + .rates = RT1318_STEREO_RATES, + .formats = RT1318_FORMATS, + }, + .ops = &rt1318_aif_dai_ops, + } +}; + +static const struct snd_soc_component_driver soc_component_dev_rt1318 = { + .probe = rt1318_probe, + .remove = rt1318_remove, + .suspend = rt1318_suspend, + .resume = rt1318_resume, + .controls = rt1318_snd_controls, + .num_controls = ARRAY_SIZE(rt1318_snd_controls), + .dapm_widgets = rt1318_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(rt1318_dapm_widgets), + .dapm_routes = rt1318_dapm_routes, + .num_dapm_routes = ARRAY_SIZE(rt1318_dapm_routes), + .use_pmdown_time = 1, + .endianness = 1, +}; + +static const struct regmap_config rt1318_regmap = { + .reg_bits = 32, + .val_bits = 8, + .readable_reg = rt1318_readable_register, + .volatile_reg = rt1318_volatile_register, + .max_register = 0x41001888, + .reg_defaults = rt1318_reg, + .num_reg_defaults = ARRAY_SIZE(rt1318_reg), + .cache_type = REGCACHE_RBTREE, + .use_single_read = true, + .use_single_write = true, +}; + +static const struct i2c_device_id rt1318_i2c_id[] = { + { "rt1318", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, rt1318_i2c_id); + +static const struct of_device_id rt1318_of_match[] = { + { .compatible = "realtek,rt1318", }, + {}, +}; +MODULE_DEVICE_TABLE(of, rt1318_of_match); + +#ifdef CONFIG_ACPI +static const struct acpi_device_id rt1318_acpi_match[] = { + { "10EC1318", 0}, + { }, +}; +MODULE_DEVICE_TABLE(acpi, rt1318_acpi_match); +#endif + +static int rt1318_parse_dt(struct rt1318_priv *rt1318, struct device *dev) +{ + device_property_read_u32(dev, "realtek,r0_l", + &rt1318->pdata.init_r0_l); + device_property_read_u32(dev, "realtek,r0_r", + &rt1318->pdata.init_r0_r); + + return 0; +} + +static void rt1318_calibration_sequence(struct rt1318_priv *rt1318) +{ + regmap_write(rt1318->regmap, RT1318_CLK1, 0x22); + regmap_write(rt1318->regmap, RT1318_PLL1_N_7_0, 0x06); + regmap_write(rt1318->regmap, RT1318_STP_TEMP_L, 0xCC); + regmap_write(rt1318->regmap, RT1318_STP_SEL_L, 0x40); + regmap_write(rt1318->regmap, RT1318_STP_SEL_R, 0x40); + regmap_write(rt1318->regmap, RT1318_SINE_GEN0, 0x20); + regmap_write(rt1318->regmap, RT1318_SPK_VOL_TH, 0x00); + regmap_write(rt1318->regmap, RT1318_FEEDBACK_PATH, 0x0B); + regmap_write(rt1318->regmap, RT1318_TCON, 0x1C); + regmap_write(rt1318->regmap, RT1318_TCON_RELATE, 0x58); + regmap_write(rt1318->regmap, RT1318_TCON_RELATE, 0x78); + regmap_write(rt1318->regmap, RT1318_STP_R0_EN_L, 0xC2); +} + +static void rt1318_r0_calculate(struct rt1318_priv *rt1318) +{ + unsigned int r0_l, r0_l_byte0, r0_l_byte1, r0_l_byte2, r0_l_byte3; + unsigned int r0_r, r0_r_byte0, r0_r_byte1, r0_r_byte2, r0_r_byte3; + unsigned int r0_l_integer, r0_l_factor, r0_r_integer, r0_r_factor; + unsigned int format = 16777216; /* 2^24 */ + + regmap_read(rt1318->regmap, RT1318_R0_L_24, &r0_l_byte0); + regmap_read(rt1318->regmap, RT1318_R0_L_23_16, &r0_l_byte1); + regmap_read(rt1318->regmap, RT1318_R0_L_15_8, &r0_l_byte2); + regmap_read(rt1318->regmap, RT1318_R0_L_7_0, &r0_l_byte3); + r0_l = r0_l_byte0 << 24 | r0_l_byte1 << 16 | r0_l_byte2 << 8 | r0_l_byte3; + r0_l_integer = format / r0_l; + r0_l_factor = (format * 10) / r0_l - r0_l_integer * 10; + + regmap_read(rt1318->regmap, RT1318_R0_R_24, &r0_r_byte0); + regmap_read(rt1318->regmap, RT1318_R0_R_23_16, &r0_r_byte1); + regmap_read(rt1318->regmap, RT1318_R0_R_15_8, &r0_r_byte2); + regmap_read(rt1318->regmap, RT1318_R0_R_7_0, &r0_r_byte3); + r0_r = r0_r_byte0 << 24 | r0_r_byte1 << 16 | r0_r_byte2 << 8 | r0_r_byte3; + r0_r_integer = format / r0_r; + r0_r_factor = (format * 10) / r0_r - r0_r_integer * 10; + + dev_dbg(rt1318->component->dev, "r0_l_ch:%d.%d ohm\n", r0_l_integer, r0_l_factor); + dev_dbg(rt1318->component->dev, "r0_r_ch:%d.%d ohm\n", r0_r_integer, r0_r_factor); +} + +static void rt1318_r0_restore(struct rt1318_priv *rt1318) +{ + regmap_write(rt1318->regmap, RT1318_PRE_R0_L_24, + (rt1318->pdata.init_r0_l >> 24) & 0xff); + regmap_write(rt1318->regmap, RT1318_PRE_R0_L_23_16, + (rt1318->pdata.init_r0_l >> 16) & 0xff); + regmap_write(rt1318->regmap, RT1318_PRE_R0_L_15_8, + (rt1318->pdata.init_r0_l >> 8) & 0xff); + regmap_write(rt1318->regmap, RT1318_PRE_R0_L_7_0, + (rt1318->pdata.init_r0_l >> 0) & 0xff); + regmap_write(rt1318->regmap, RT1318_PRE_R0_R_24, + (rt1318->pdata.init_r0_r >> 24) & 0xff); + regmap_write(rt1318->regmap, RT1318_PRE_R0_R_23_16, + (rt1318->pdata.init_r0_r >> 16) & 0xff); + regmap_write(rt1318->regmap, RT1318_PRE_R0_R_15_8, + (rt1318->pdata.init_r0_r >> 8) & 0xff); + regmap_write(rt1318->regmap, RT1318_PRE_R0_R_7_0, + (rt1318->pdata.init_r0_r >> 0) & 0xff); + regmap_write(rt1318->regmap, RT1318_STP_SEL_L, 0x80); + regmap_write(rt1318->regmap, RT1318_STP_SEL_R, 0x80); + regmap_write(rt1318->regmap, RT1318_R0_CMP_L_FLAG, 0xc0); + regmap_write(rt1318->regmap, RT1318_R0_CMP_R_FLAG, 0xc0); + regmap_write(rt1318->regmap, RT1318_STP_R0_EN_L, 0xc0); + regmap_write(rt1318->regmap, RT1318_STP_R0_EN_R, 0xc0); + regmap_write(rt1318->regmap, RT1318_STP_TEMP_L, 0xcc); + regmap_write(rt1318->regmap, RT1318_TCON, 0x9c); +} + +static int rt1318_calibrate(struct rt1318_priv *rt1318) +{ + int chk_cnt = 30, count = 0; + int val, val2; + + regmap_write(rt1318->regmap, RT1318_PWR_STA1, 0x1); + usleep_range(0, 10000); + rt1318_calibration_sequence(rt1318); + + while (count < chk_cnt) { + msleep(100); + regmap_read(rt1318->regmap, RT1318_R0_CMP_L_FLAG, &val); + regmap_read(rt1318->regmap, RT1318_R0_CMP_R_FLAG, &val2); + val = (val >> 1) & 0x1; + val2 = (val2 >> 1) & 0x1; + if (val & val2) { + dev_dbg(rt1318->component->dev, "Calibration done.\n"); + break; + } + count++; + if (count == chk_cnt) { + regmap_write(rt1318->regmap, RT1318_PWR_STA1, 0x0); + return RT1318_R0_CALIB_NOT_DONE; + } + } + regmap_write(rt1318->regmap, RT1318_PWR_STA1, 0x0); + regmap_read(rt1318->regmap, RT1318_R0_CMP_L_FLAG, &val); + regmap_read(rt1318->regmap, RT1318_R0_CMP_R_FLAG, &val2); + if ((val & 0x1) & (val2 & 0x1)) + return RT1318_R0_IN_RANGE; + else + return RT1318_R0_OUT_OF_RANGE; +} + +static void rt1318_calibration_work(struct work_struct *work) +{ + struct rt1318_priv *rt1318 = + container_of(work, struct rt1318_priv, cali_work); + int ret; + + if (rt1318->pdata.init_r0_l && rt1318->pdata.init_r0_r) + rt1318_r0_restore(rt1318); + else { + ret = rt1318_calibrate(rt1318); + if (ret == RT1318_R0_IN_RANGE) + rt1318_r0_calculate(rt1318); + dev_dbg(rt1318->component->dev, "Calibrate R0 result:%d\n", ret); + } +} + +static int rt1318_i2c_probe(struct i2c_client *i2c) +{ + struct rt1318_platform_data *pdata = dev_get_platdata(&i2c->dev); + struct rt1318_priv *rt1318; + int ret, val, val2, dev_id; + + rt1318 = devm_kzalloc(&i2c->dev, sizeof(struct rt1318_priv), + GFP_KERNEL); + if (!rt1318) + return -ENOMEM; + + i2c_set_clientdata(i2c, rt1318); + + if (pdata) + rt1318->pdata = *pdata; + else + rt1318_parse_dt(rt1318, &i2c->dev); + + rt1318->regmap = devm_regmap_init_i2c(i2c, &rt1318_regmap); + if (IS_ERR(rt1318->regmap)) { + ret = PTR_ERR(rt1318->regmap); + dev_err(&i2c->dev, "Failed to allocate register map: %d\n", + ret); + return ret; + } + + regmap_read(rt1318->regmap, RT1318_DEV_ID1, &val); + regmap_read(rt1318->regmap, RT1318_DEV_ID2, &val2); + dev_id = (val << 8) | val2; + if (dev_id != 0x6821) { + dev_err(&i2c->dev, + "Device with ID register %#x is not rt1318\n", + dev_id); + return -ENODEV; + } + + INIT_WORK(&rt1318->cali_work, rt1318_calibration_work); + + return devm_snd_soc_register_component(&i2c->dev, + &soc_component_dev_rt1318, rt1318_dai, ARRAY_SIZE(rt1318_dai)); +} + +struct i2c_driver rt1318_i2c_driver = { + .driver = { + .name = "rt1318", + .of_match_table = of_match_ptr(rt1318_of_match), + .acpi_match_table = ACPI_PTR(rt1318_acpi_match), + }, + .probe_new = rt1318_i2c_probe, + .id_table = rt1318_i2c_id, +}; +module_i2c_driver(rt1318_i2c_driver); + +MODULE_DESCRIPTION("ASoC RT1318 driver"); +MODULE_AUTHOR("Jack Yu <jack.yu(a)realtek.com>"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/rt1318.h b/sound/soc/codecs/rt1318.h new file mode 100644 index 000000000000..cec40b484216 --- /dev/null +++ b/sound/soc/codecs/rt1318.h @@ -0,0 +1,342 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * rt1318.h -- Platform data for RT1318 + * + * Copyright 2024 Realtek Semiconductor Corp. + */ +#include <sound/rt1318.h> + +#ifndef __RT1318_H__ +#define __RT1318_H__ + +struct rt1318_priv { + struct snd_soc_component *component; + struct rt1318_platform_data pdata; + struct work_struct cali_work; + struct regmap *regmap; + + unsigned int r0_l_integer; + unsigned int r0_l_factor; + unsigned int r0_r_integer; + unsigned int r0_r_factor; + int rt1318_init; + int rt1318_dvol; + int sysclk_src; + int sysclk; + int lrck; + int bclk; + int master; + int pll_src; + int pll_in; + int pll_out; +}; + +#define RT1318_PLL_INP_MAX 40000000 +#define RT1318_PLL_INP_MIN 256000 +#define RT1318_PLL_N_MAX 0x1ff +#define RT1318_PLL_K_MAX 0x1f +#define RT1318_PLL_M_MAX 0x1f + +#define RT1318_LRCLK_192000 192000 +#define RT1318_LRCLK_96000 96000 +#define RT1318_LRCLK_48000 48000 +#define RT1318_LRCLK_44100 44100 +#define RT1318_LRCLK_16000 16000 +#define RT1318_DVOL_STEP 383 + +#define RT1318_CLK1 0xc001 +#define RT1318_CLK2 0xc003 +#define RT1318_CLK3 0xc004 +#define RT1318_CLK4 0xc005 +#define RT1318_CLK5 0xc006 +#define RT1318_CLK6 0xc007 +#define RT1318_CLK7 0xc008 +#define RT1318_PWR_STA1 0xc121 +#define RT1318_SPK_VOL_TH 0xc130 +#define RT1318_TCON 0xc203 +#define RT1318_SRC_TCON 0xc204 +#define RT1318_TCON_RELATE 0xc206 +#define RT1318_DA_VOL_L_8 0xc20b +#define RT1318_DA_VOL_L_1_7 0xc20c +#define RT1318_DA_VOL_R_8 0xc20d +#define RT1318_DA_VOL_R_1_7 0xc20e +#define RT1318_FEEDBACK_PATH 0xc321 +#define RT1318_STP_TEMP_L 0xdb00 +#define RT1318_STP_SEL_L 0xdb08 +#define RT1318_STP_R0_EN_L 0xdb12 +#define RT1318_R0_CMP_L_FLAG 0xdb35 +#define RT1318_PRE_R0_L_24 0xdbb5 +#define RT1318_PRE_R0_L_23_16 0xdbb6 +#define RT1318_PRE_R0_L_15_8 0xdbb7 +#define RT1318_PRE_R0_L_7_0 0xdbb8 +#define RT1318_R0_L_24 0xdbc5 +#define RT1318_R0_L_23_16 0xdbc6 +#define RT1318_R0_L_15_8 0xdbc7 +#define RT1318_R0_L_7_0 0xdbc8 +#define RT1318_STP_SEL_R 0xdd08 +#define RT1318_STP_R0_EN_R 0xdd12 +#define RT1318_R0_CMP_R_FLAG 0xdd35 +#define RT1318_PRE_R0_R_24 0xddb5 +#define RT1318_PRE_R0_R_23_16 0xddb6 +#define RT1318_PRE_R0_R_15_8 0xddb7 +#define RT1318_PRE_R0_R_7_0 0xddb8 +#define RT1318_R0_R_24 0xddc5 +#define RT1318_R0_R_23_16 0xddc6 +#define RT1318_R0_R_15_8 0xddc7 +#define RT1318_R0_R_7_0 0xddc8 +#define RT1318_DEV_ID1 0xf012 +#define RT1318_DEV_ID2 0xf013 +#define RT1318_PLL1_K 0xf20d +#define RT1318_PLL1_M 0xf20f +#define RT1318_PLL1_N_8 0xf211 +#define RT1318_PLL1_N_7_0 0xf212 +#define RT1318_SINE_GEN0 0xf800 +#define RT1318_TDM_CTRL1 0xf900 +#define RT1318_TDM_CTRL2 0xf901 +#define RT1318_TDM_CTRL3 0xf902 +#define RT1318_TDM_CTRL9 0xf908 + + +/* Clock-1 (0xC001) */ +#define RT1318_PLLIN_MASK (0x7 << 4) +#define RT1318_PLLIN_BCLK0 (0x0 << 4) +#define RT1318_PLLIN_BCLK1 (0x1 << 4) +#define RT1318_PLLIN_RC (0x2 << 4) +#define RT1318_PLLIN_MCLK (0x3 << 4) +#define RT1318_PLLIN_SDW1 (0x4 << 4) +#define RT1318_PLLIN_SDW2 (0x5 << 4) +#define RT1318_PLLIN_SDW3 (0x6 << 4) +#define RT1318_PLLIN_SDW4 (0x7 << 4) +#define RT1318_SYSCLK_SEL_MASK (0x7 << 0) +#define RT1318_SYSCLK_BCLK (0x0 << 0) +#define RT1318_SYSCLK_SDW (0x1 << 0) +#define RT1318_SYSCLK_PLL2F (0x2 << 0) +#define RT1318_SYSCLK_PLL2B (0x3 << 0) +#define RT1318_SYSCLK_MCLK (0x4 << 0) +#define RT1318_SYSCLK_RC1 (0x5 << 0) +#define RT1318_SYSCLK_RC2 (0x6 << 0) +#define RT1318_SYSCLK_RC3 (0x7 << 0) +/* Clock-2 (0xC003) */ +#define RT1318_DIV_AP_MASK (0x3 << 4) +#define RT1318_DIV_AP_SFT 4 +#define RT1318_DIV_AP_DIV1 (0x0 << 4) +#define RT1318_DIV_AP_DIV2 (0x1 << 4) +#define RT1318_DIV_AP_DIV4 (0x2 << 4) +#define RT1318_DIV_AP_DIV8 (0x3 << 4) +#define RT1318_DIV_DAMOD_MASK (0x3 << 0) +#define RT1318_DIV_DAMOD_SFT 0 +#define RT1318_DIV_DAMOD_DIV1 (0x0 << 0) +#define RT1318_DIV_DAMOD_DIV2 (0x1 << 0) +#define RT1318_DIV_DAMOD_DIV4 (0x2 << 0) +#define RT1318_DIV_DAMOD_DIV8 (0x3 << 0) +/* Clock-3 (0xC004) */ +#define RT1318_AD_STO1_MASK (0x7 << 4) +#define RT1318_AD_STO1_SFT 4 +#define RT1318_AD_STO1_DIV1 (0x0 << 4) +#define RT1318_AD_STO1_DIV2 (0x1 << 4) +#define RT1318_AD_STO1_DIV4 (0x2 << 4) +#define RT1318_AD_STO1_DIV8 (0x3 << 4) +#define RT1318_AD_STO1_DIV16 (0x4 << 4) +#define RT1318_AD_STO2_MASK (0x7 << 0) +#define RT1318_AD_STO2_SFT 0 +#define RT1318_AD_STO2_DIV1 (0x0 << 0) +#define RT1318_AD_STO2_DIV2 (0x1 << 0) +#define RT1318_AD_STO2_DIV4 (0x2 << 0) +#define RT1318_AD_STO2_DIV8 (0x3 << 0) +#define RT1318_AD_STO2_DIV16 (0x4 << 0) +#define RT1318_AD_STO2_SFT 0 +/* Clock-4 (0xC005) */ +#define RT1318_AD_ANA_STO1_MASK (0x7 << 4) +#define RT1318_AD_ANA_STO1_SFT 4 +#define RT1318_AD_ANA_STO1_DIV1 (0x0 << 4) +#define RT1318_AD_ANA_STO1_DIV2 (0x1 << 4) +#define RT1318_AD_ANA_STO1_DIV4 (0x2 << 4) +#define RT1318_AD_ANA_STO1_DIV8 (0x3 << 4) +#define RT1318_AD_ANA_STO1_DIV16 (0x4 << 4) +#define RT1318_AD_ANA_STO2_MASK (0x7 << 0) +#define RT1318_AD_ANA_STO2_DIV1 (0x0 << 0) +#define RT1318_AD_ANA_STO2_DIV2 (0x1 << 0) +#define RT1318_AD_ANA_STO2_DIV4 (0x2 << 0) +#define RT1318_AD_ANA_STO2_DIV8 (0x3 << 0) +#define RT1318_AD_ANA_STO2_DIV16 (0x4 << 0) +#define RT1318_AD_ANA_STO2_SFT 0 +/* Clock-5 (0xC006) */ +#define RT1318_DIV_FIFO_IN_MASK (0x3 << 4) +#define RT1318_DIV_FIFO_IN_SFT 4 +#define RT1318_DIV_FIFO_IN_DIV1 (0x0 << 4) +#define RT1318_DIV_FIFO_IN_DIV2 (0x1 << 4) +#define RT1318_DIV_FIFO_IN_DIV4 (0x2 << 4) +#define RT1318_DIV_FIFO_IN_DIV8 (0x3 << 4) +#define RT1318_DIV_FIFO_OUT_MASK (0x3 << 0) +#define RT1318_DIV_FIFO_OUT_DIV1 (0x0 << 0) +#define RT1318_DIV_FIFO_OUT_DIV2 (0x1 << 0) +#define RT1318_DIV_FIFO_OUT_DIV4 (0x2 << 0) +#define RT1318_DIV_FIFO_OUT_DIV8 (0x3 << 0) +#define RT1318_DIV_FIFO_OUT_SFT 0 +/* Clock-6 (0xC007) */ +#define RT1318_DIV_NLMS_MASK (0x3 << 6) +#define RT1318_DIV_NLMS_SFT 6 +#define RT1318_DIV_NLMS_DIV1 (0x0 << 6) +#define RT1318_DIV_NLMS_DIV2 (0x1 << 6) +#define RT1318_DIV_NLMS_DIV4 (0x2 << 6) +#define RT1318_DIV_NLMS_DIV8 (0x3 << 6) +#define RT1318_DIV_AD_MONO_MASK (0x7 << 3) +#define RT1318_DIV_AD_MONO_SFT 3 +#define RT1318_DIV_AD_MONO_DIV1 (0x0 << 3) +#define RT1318_DIV_AD_MONO_DIV2 (0x1 << 3) +#define RT1318_DIV_AD_MONO_DIV4 (0x2 << 3) +#define RT1318_DIV_AD_MONO_DIV8 (0x3 << 3) +#define RT1318_DIV_AD_MONO_DIV16 (0x4 << 3) +#define RT1318_DIV_POST_G_MASK (0x7 << 0) +#define RT1318_DIV_POST_G_SFT 0 +#define RT1318_DIV_POST_G_DIV1 (0x0 << 0) +#define RT1318_DIV_POST_G_DIV2 (0x1 << 0) +#define RT1318_DIV_POST_G_DIV4 (0x2 << 0) +#define RT1318_DIV_POST_G_DIV8 (0x3 << 0) +#define RT1318_DIV_POST_G_DIV16 (0x4 << 0) +/* Power Status 1 (0xC121) */ +#define RT1318_PDB_CTRL_MASK (0x1) +#define RT1318_PDB_CTRL_LOW (0x0) +#define RT1318_PDB_CTRL_HIGH (0x1) +#define RT1318_PDB_CTRL_SFT 0 +/* SRC Tcon(0xc204) */ +#define RT1318_SRCIN_IN_SEL_MASK (0x3 << 6) +#define RT1318_SRCIN_IN_48K (0x0 << 6) +#define RT1318_SRCIN_IN_44P1 (0x1 << 6) +#define RT1318_SRCIN_IN_32K (0x2 << 6) +#define RT1318_SRCIN_IN_16K (0x3 << 6) +#define RT1318_SRCIN_F12288_MASK (0x3 << 4) +#define RT1318_SRCIN_TCON1 (0x0 << 4) +#define RT1318_SRCIN_TCON2 (0x1 << 4) +#define RT1318_SRCIN_TCON4 (0x2 << 4) +#define RT1318_SRCIN_TCON8 (0x3 << 4) +#define RT1318_SRCIN_DACLK_MASK (0x3 << 2) +#define RT1318_DACLK_TCON1 (0x0 << 2) +#define RT1318_DACLK_TCON2 (0x1 << 2) +#define RT1318_DACLK_TCON4 (0x2 << 2) +#define RT1318_DACLK_TCON8 (0x3 << 2) +/* R0 Compare Flag (0xDB35) */ +#define RT1318_R0_RANGE_MASK (0x1) +#define RT1318_R0_OUTOFRANGE (0x0) +#define RT1318_R0_INRANGE (0x1) +/* PLL internal setting (0xF20D), K value */ +#define RT1318_K_PLL1_MASK (0x1f << 0) +/* PLL internal setting (0xF20F), M value */ +#define RT1318_M_PLL1_MASK (0x1f << 0) +/* PLL internal setting (0xF211), N_8 value */ +#define RT1318_N_8_PLL1_MASK (0x1 << 0) +/* PLL internal setting (0xF212), N_7_0 value */ +#define RT1318_N_7_0_PLL1_MASK (0xff << 0) +/* TDM CTRL 1 (0xf900) */ +#define RT1318_TDM_BCLK_MASK (0x1 << 7) +#define RT1318_TDM_BCLK_NORM (0x0 << 7) +#define RT1318_TDM_BCLK_INV (0x1 << 7) +#define RT1318_I2S_FMT_MASK (0x7 << 0) +#define RT1318_FMT_I2S (0x0 << 0) +#define RT1318_FMT_LEFT_J (0x1 << 0) +#define RT1318_FMT_PCM_A_R (0x2 << 0) +#define RT1318_FMT_PCM_B_R (0x3 << 0) +#define RT1318_FMT_PCM_A_F (0x6 << 0) +#define RT1318_FMT_PCM_B_F (0x7 << 0) +#define RT1318_I2S_FMT_SFT 0 +/* TDM CTRL 2 (0xf901) */ +#define RT1318_I2S_CH_TX_MASK (0x3 << 6) +#define RT1318_I2S_CH_TX_2CH (0x0 << 6) +#define RT1318_I2S_CH_TX_4CH (0x1 << 6) +#define RT1318_I2S_CH_TX_6CH (0x2 << 6) +#define RT1318_I2S_CH_TX_8CH (0x3 << 6) +#define RT1318_I2S_CH_RX_MASK (0x3 << 4) +#define RT1318_I2S_CH_RX_2CH (0x0 << 4) +#define RT1318_I2S_CH_RX_4CH (0x1 << 4) +#define RT1318_I2S_CH_RX_6CH (0x2 << 4) +#define RT1318_I2S_CH_RX_8CH (0x3 << 4) +#define RT1318_I2S_DL_MASK 0x7 +#define RT1318_I2S_DL_SFT 0 +#define RT1318_I2S_DL_16 0x0 +#define RT1318_I2S_DL_20 0x1 +#define RT1318_I2S_DL_24 0x2 +#define RT1318_I2S_DL_32 0x3 +#define RT1318_I2S_DL_8 0x4 +/* TDM CTRL 3 (0xf902) */ +#define RT1318_I2S_TX_CHL_MASK (0x7 << 4) +#define RT1318_I2S_TX_CHL_SFT 4 +#define RT1318_I2S_TX_CHL_16 (0x0 << 4) +#define RT1318_I2S_TX_CHL_20 (0x1 << 4) +#define RT1318_I2S_TX_CHL_24 (0x2 << 4) +#define RT1318_I2S_TX_CHL_32 (0x3 << 4) +#define RT1318_I2S_TX_CHL_8 (0x4 << 4) +#define RT1318_I2S_RX_CHL_MASK (0x7 << 0) +#define RT1318_I2S_RX_CHL_SFT 0 +#define RT1318_I2S_RX_CHL_16 (0x0 << 0) +#define RT1318_I2S_RX_CHL_20 (0x1 << 0) +#define RT1318_I2S_RX_CHL_24 (0x2 << 0) +#define RT1318_I2S_RX_CHL_32 (0x3 << 0) +#define RT1318_I2S_RX_CHL_8 (0x4 << 0) +/* TDM CTRL 9 (0xf908) */ +#define RT1318_TDM_I2S_TX_L_DAC1_1_MASK (0x7 << 4) +#define RT1318_TDM_I2S_TX_R_DAC1_1_MASK 0x7 +#define RT1318_TDM_I2S_TX_L_DAC1_1_SFT 4 +#define RT1318_TDM_I2S_TX_R_DAC1_1_SFT 0 + +#define RT1318_REG_DISP_LEN 23 + +/* System Clock Source */ +enum { + RT1318_SCLK_S_BCLK, + RT1318_SCLK_S_SDW, + RT1318_SCLK_S_PLL2F, + RT1318_SCLK_S_PLL2B, + RT1318_SCLK_S_MCLK, + RT1318_SCLK_S_RC0, + RT1318_SCLK_S_RC1, + RT1318_SCLK_S_RC2, +}; + +/* PLL Source */ +enum { + RT1318_PLL_S_BCLK0, + RT1318_PLL_S_BCLK1, + RT1318_PLL_S_RC, + RT1318_PLL_S_MCLK, + RT1318_PLL_S_SDW_IN_PLL, + RT1318_PLL_S_SDW_0, + RT1318_PLL_S_SDW_1, + RT1318_PLL_S_SDW_2, +}; + +/* TDM channel */ +enum { + RT1318_2CH, + RT1318_4CH, + RT1318_6CH, + RT1318_8CH, +}; + +/* R0 calibration result */ +enum { + RT1318_R0_OUT_OF_RANGE, + RT1318_R0_IN_RANGE, + RT1318_R0_CALIB_NOT_DONE, +}; + +/* PLL pre-defined M/N/K */ + +struct pll_calc_map { + unsigned int pll_in; + unsigned int pll_out; + int k; + int n; + int m; + bool m_bp; + bool k_bp; +}; + +struct rt1318_pll_code { + bool m_bp; /* Indicates bypass m code or not. */ + bool k_bp; /* Indicates bypass k code or not. */ + int m_code; + int n_code; + int k_code; +}; + +#endif /* __RT1318_H__ */ -- 2.34.1

3 6

[PATCH] ASoC: codecs: ES8326: Slove headphone detection issue
by Zhang Yi 05 Jun '24

05 Jun '24

When switching between OMTP and CTIA headset, we can hear pop noise. To solve this issue, We modified the configuration for headphone detection Signed-off-by: Zhang Yi <zhangyi(a)everest-semi.com> --- sound/soc/codecs/es8326.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/es8326.c b/sound/soc/codecs/es8326.c index 3031699a14c4..4d87bebca5c1 100755 --- a/sound/soc/codecs/es8326.c +++ b/sound/soc/codecs/es8326.c @@ -857,12 +857,16 @@ static void es8326_jack_detect_handler(struct work_struct *work) * set auto-check mode, then restart jack_detect_work after 400ms. * Don't report jack status. */ - regmap_write(es8326->regmap, ES8326_INT_SOURCE, - (ES8326_INT_SRC_PIN9 | ES8326_INT_SRC_BUTTON)); + regmap_write(es8326->regmap, ES8326_INT_SOURCE, 0x00); regmap_update_bits(es8326->regmap, ES8326_HPDET_TYPE, 0x03, 0x01); + regmap_update_bits(es8326->regmap, ES8326_HPDET_TYPE, 0x10, 0x00); es8326_enable_micbias(es8326->component); usleep_range(50000, 70000); regmap_update_bits(es8326->regmap, ES8326_HPDET_TYPE, 0x03, 0x00); + regmap_update_bits(es8326->regmap, ES8326_HPDET_TYPE, 0x10, 0x10); + usleep_range(50000, 70000); + regmap_write(es8326->regmap, ES8326_INT_SOURCE, + (ES8326_INT_SRC_PIN9 | ES8326_INT_SRC_BUTTON)); regmap_write(es8326->regmap, ES8326_SYS_BIAS, 0x1f); regmap_update_bits(es8326->regmap, ES8326_HP_DRIVER_REF, 0x0f, 0x08); queue_delayed_work(system_wq, &es8326->jack_detect_work, -- 2.17.1

1 0

[PATCH] ASoC: qcom: add missing MODULE_DESCRIPTION() macro
by Jeff Johnson 04 Jun '24

04 Jun '24

make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/qcom/snd-soc-qcom-sdw.o Add the missing invocation of the MODULE_DESCRIPTION() macro. Signed-off-by: Jeff Johnson <quic_jjohnson(a)quicinc.com> --- sound/soc/qcom/sdw.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/qcom/sdw.c b/sound/soc/qcom/sdw.c index eaa8bb016e50..f2eda2ff46c0 100644 --- a/sound/soc/qcom/sdw.c +++ b/sound/soc/qcom/sdw.c @@ -160,4 +160,5 @@ int qcom_snd_sdw_hw_free(struct snd_pcm_substream *substream, return 0; } EXPORT_SYMBOL_GPL(qcom_snd_sdw_hw_free); +MODULE_DESCRIPTION("Qualcomm ASoC SoundWire helper functions"); MODULE_LICENSE("GPL"); --- base-commit: 83814698cf48ce3aadc5d88a3f577f04482ff92a change-id: 20240602-md-snd-soc-qcom-sdw-07dac5b62d65

4 8

Using amixer to reduce right speaker volume to zero(and leave left unchanged)
by GitHub issues - opened 04 Jun '24

04 Jun '24

alsa-project/alsa-utils issue #269 was opened from sierret: I'm trying to right a script to reduce my right speaker volume to 0. I know the code: `amixer -D pulse sset Master -,0` sets the LEFT speaker to zero and leaves the right unchanged. However, for the life of me I can't manage to modify this code to do the opposite. And there don't seem to be adequate resources directing how to do so floating around the interwebs. Issue URL : https://github.com/alsa-project/alsa-utils/issues/269 Repository URL: https://github.com/alsa-project/alsa-utils

1 0