March 2024 - Alsa-devel - mailman.alsa-project.org

Alsamixer is exiting upon receiving some keys, such as volume control ones
by GitHub issues - opened 06 Mar '24

06 Mar '24

alsa-project/alsa-utils issue #255 was opened from Porkepix: When in an environment not intercepting those keys (usually managed by your compositor/window manager), upon receiving some keycodes such as volume up or down, alsamixer is exiting and writing the UTF-8 keycode inside the terminal while it shouldn't. Examples: Mute key > 440u Volume down key > 438u Volume up key > 439u Curiously enough, the microphone mute one doesn't do anything. These should at the very least not exit alsamixer. A bonus would be, when they're not intercepted, to actually use them to apply mutes and volumes up/down. Issue URL : https://github.com/alsa-project/alsa-utils/issues/255 Repository URL: https://github.com/alsa-project/alsa-utils

1 0

[PATCH v1] slimbus: stream: Add null pointer check to prevent crash
by Viken Dadhaniya 06 Mar '24

06 Mar '24

We are facing crash due to null pointer dereference of stream in slim_stream_disable(). there is a possible scenario where client driver is calling slimbus stream APIs in incorrect sequence and it might lead to null pointer access of the stream in slimbus enable/disable/prepare/unprepare/free functions. Fix this issue by adding null pointer check of the stream before accessing in all stream API’s exposed to client. Signed-off-by: Viken Dadhaniya <quic_vdadhani(a)quicinc.com> --- drivers/slimbus/stream.c | 37 +++++++++++++++++++++++++++++++++---- 1 file changed, 33 insertions(+), 4 deletions(-) diff --git a/drivers/slimbus/stream.c b/drivers/slimbus/stream.c index 1d6b38657917..c5a436fd0952 100644 --- a/drivers/slimbus/stream.c +++ b/drivers/slimbus/stream.c @@ -202,10 +202,16 @@ static int slim_get_prate_code(int rate) int slim_stream_prepare(struct slim_stream_runtime *rt, struct slim_stream_config *cfg) { - struct slim_controller *ctrl = rt->dev->ctrl; + struct slim_controller *ctrl; struct slim_port *port; int num_ports, i, port_id, prrate; + if (!rt || !cfg) { + pr_err("%s: Stream or cfg is NULL, Check from client side\n", __func__); + return -EINVAL; + } + + ctrl = rt->dev->ctrl; if (rt->ports) { dev_err(&rt->dev->dev, "Stream already Prepared\n"); return -EINVAL; @@ -358,9 +364,15 @@ int slim_stream_enable(struct slim_stream_runtime *stream) { DEFINE_SLIM_BCAST_TXN(txn, SLIM_MSG_MC_BEGIN_RECONFIGURATION, 3, SLIM_LA_MANAGER, NULL); - struct slim_controller *ctrl = stream->dev->ctrl; + struct slim_controller *ctrl; int ret, i; + if (!stream) { + pr_err("%s: Stream is NULL, Check from client side\n", __func__); + return -EINVAL; + } + + ctrl = stream->dev->ctrl; if (ctrl->enable_stream) { ret = ctrl->enable_stream(stream); if (ret) @@ -411,12 +423,18 @@ int slim_stream_disable(struct slim_stream_runtime *stream) { DEFINE_SLIM_BCAST_TXN(txn, SLIM_MSG_MC_BEGIN_RECONFIGURATION, 3, SLIM_LA_MANAGER, NULL); - struct slim_controller *ctrl = stream->dev->ctrl; + struct slim_controller *ctrl; int ret, i; + if (!stream) { + pr_err("%s: Stream is NULL, Check from client side\n", __func__); + return -EINVAL; + } + if (!stream->ports || !stream->num_ports) return -EINVAL; + ctrl = stream->dev->ctrl; if (ctrl->disable_stream) ctrl->disable_stream(stream); @@ -448,6 +466,11 @@ int slim_stream_unprepare(struct slim_stream_runtime *stream) { int i; + if (!stream) { + pr_err("%s: Stream is NULL, Check from client side\n", __func__); + return -EINVAL; + } + if (!stream->ports || !stream->num_ports) return -EINVAL; @@ -476,8 +499,14 @@ EXPORT_SYMBOL_GPL(slim_stream_unprepare); */ int slim_stream_free(struct slim_stream_runtime *stream) { - struct slim_device *sdev = stream->dev; + struct slim_device *sdev; + + if (!stream) { + pr_err("%s: Stream is NULL, Check from client side\n", __func__); + return -EINVAL; + } + sdev = stream->dev; spin_lock(&sdev->stream_list_lock); list_del(&stream->node); spin_unlock(&sdev->stream_list_lock); -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

1 0

[PATCH v1] slimbus: qcom-ngd-ctrl: Add timeout for wait operation
by Viken Dadhaniya 06 Mar '24

06 Mar '24

In current driver qcom_slim_ngd_up_worker() indefinitely waiting for ctrl->qmi_up completion object. This is resulting in workqueue lockup on Kthread. Added wait_for_completion_interruptible_timeout to allow the thread to wait for specific timeout period and bail out instead waiting infinitely. Signed-off-by: Viken Dadhaniya <quic_vdadhani(a)quicinc.com> --- drivers/slimbus/qcom-ngd-ctrl.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/slimbus/qcom-ngd-ctrl.c b/drivers/slimbus/qcom-ngd-ctrl.c index efeba8275a66..c27076d8b7db 100644 --- a/drivers/slimbus/qcom-ngd-ctrl.c +++ b/drivers/slimbus/qcom-ngd-ctrl.c @@ -83,6 +83,7 @@ #define QCOM_SLIM_NGD_AUTOSUSPEND MSEC_PER_SEC #define SLIM_RX_MSGQ_TIMEOUT_VAL 0x10000 +#define SLIM_QMI_TIMEOUT_MS 1000 #define SLIM_LA_MGR 0xFF #define SLIM_ROOT_FREQ 24576000 @@ -1451,7 +1452,11 @@ static void qcom_slim_ngd_up_worker(struct work_struct *work) ctrl = container_of(work, struct qcom_slim_ngd_ctrl, ngd_up_work); /* Make sure qmi service is up before continuing */ - wait_for_completion_interruptible(&ctrl->qmi_up); + if (!wait_for_completion_interruptible_timeout(&ctrl->qmi_up, + msecs_to_jiffies(SLIM_QMI_TIMEOUT_MS))) { + dev_err(ctrl->dev, "QMI wait timeout\n"); + return; + } mutex_lock(&ctrl->ssr_lock); qcom_slim_ngd_enable(ctrl, true); -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

2 2

[PATCH] ASoC: da7219: read fmw property to get mclk for non-dts systems
by cujomalainey＠chromium.org 05 Mar '24

05 Mar '24

From: Akshu Agrawal <akshu.agrawal(a)amd.com> Non-dts based systems can use ACPI DSDT to pass on the mclk to da7219. This enables da7219 mclk to be linked to system clock. Enable/Disable of the mclk is already handled in the codec so platform drivers don't have to explicitly do handling of mclk. Signed-off-by: Akshu Agrawal <akshu.agrawal(a)amd.com> Signed-off-by: Curtis Malainey <cujomalainey(a)chromium.org> Cc: Karthik Ramasubramanian <kramasub(a)google.com> --- include/sound/da7219.h | 2 ++ sound/soc/codecs/da7219.c | 8 +++++++- 2 files changed, 9 insertions(+), 1 deletion(-) diff --git a/include/sound/da7219.h b/include/sound/da7219.h index dde4542b084f3..4cf4c52be3f7f 100644 --- a/include/sound/da7219.h +++ b/include/sound/da7219.h @@ -40,6 +40,8 @@ struct da7219_pdata { const char *dai_clk_names[DA7219_DAI_NUM_CLKS]; + const char *mclk_name; + /* Mic */ enum da7219_micbias_voltage micbias_lvl; enum da7219_mic_amp_in_sel mic_amp_in_sel; diff --git a/sound/soc/codecs/da7219.c b/sound/soc/codecs/da7219.c index 311ea7918b312..800f61d993043 100644 --- a/sound/soc/codecs/da7219.c +++ b/sound/soc/codecs/da7219.c @@ -1782,6 +1782,8 @@ static struct da7219_pdata *da7219_fw_to_pdata(struct device *dev) pdata->dai_clk_names[DA7219_DAI_WCLK_IDX], pdata->dai_clk_names[DA7219_DAI_BCLK_IDX]); + device_property_read_string(dev, "dlg,mclk-name", &pdata->mclk_name); + if (device_property_read_u32(dev, "dlg,micbias-lvl", &of_val32) >= 0) pdata->micbias_lvl = da7219_fw_micbias_lvl(dev, of_val32); else @@ -2521,7 +2523,11 @@ static int da7219_probe(struct snd_soc_component *component) da7219_handle_pdata(component); /* Check if MCLK provided */ - da7219->mclk = clk_get(component->dev, "mclk"); + if (da7219->pdata->mclk_name) + da7219->mclk = clk_get(NULL, da7219->pdata->mclk_name); + if (!da7219->mclk) + da7219->mclk = clk_get(component->dev, "mclk"); + if (IS_ERR(da7219->mclk)) { if (PTR_ERR(da7219->mclk) != -ENOENT) { ret = PTR_ERR(da7219->mclk); -- 2.44.0.rc1.240.g4c46232300-goog

3 4

Dmic nhlt update
by GitHub pull_request - opened 05 Mar '24

05 Mar '24

alsa-project/alsa-utils pull request #254 was opened from jsarha: Driver version 4 update from for DMIC NHLT generator, and some error print improvements. Request URL : https://github.com/alsa-project/alsa-utils/pull/254 Patch URL : https://github.com/alsa-project/alsa-utils/pull/254.patch Repository URL: https://github.com/alsa-project/alsa-utils

1 0

[PATCH v3] ASoC: soc-core.c: Prefer to return dai->driver->name in snd_soc_dai_name_get()
by Chancel Liu 05 Mar '24

05 Mar '24

ASoC machine driver can use snd_soc_{of_}get_dlc() (A) to get DAI name for dlc (snd_soc_dai_link_component). In this function call dlc->dai_name is parsed via snd_soc_dai_name_get() (B). (A) int snd_soc_get_dlc(...) { ... (B) dlc->dai_name = snd_soc_dai_name_get(dai); ... } (B) has a priority to return dai->name as dlc->dai_name. In most cases card can probe successfully. However it has an issue that ASoC tries to rebind card. Here is a simplified flow for example: | a) Card probes successfully at first | b) One of the component bound to this card is removed for some | reason the component->dev is released | c) That component is re-registered v d) ASoC calls snd_soc_try_rebind_card() a) points dlc->dai_name to dai->name. b) releases all resource of the old DAI. c) creates new DAI structure. In result d) can not use dlc->dai_name to add new created DAI. So it's reasonable that prefer to return dai->driver->name in snd_soc_dai_name_get() because dai->driver is a pre-defined global variable. Also update snd_soc_is_matching_dai() for alignment. Signed-off-by: Chancel Liu <chancel.liu(a)nxp.com> --- changes in v2: - update snd_soc_is_matching_dai() for alignment changes in v3: - resolve conflicts when applying patch, no others changed sound/soc/soc-core.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 507cd3015ff4..1e94edba12eb 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -283,13 +283,13 @@ static int snd_soc_is_matching_dai(const struct snd_soc_dai_link_component *dlc, /* see snd_soc_dai_name_get() */ - if (strcmp(dlc->dai_name, dai->name) == 0) - return 1; - if (dai->driver->name && strcmp(dlc->dai_name, dai->driver->name) == 0) return 1; + if (strcmp(dlc->dai_name, dai->name) == 0) + return 1; + if (dai->component->name && strcmp(dlc->dai_name, dai->component->name) == 0) return 1; @@ -300,12 +300,12 @@ static int snd_soc_is_matching_dai(const struct snd_soc_dai_link_component *dlc, const char *snd_soc_dai_name_get(struct snd_soc_dai *dai) { /* see snd_soc_is_matching_dai() */ - if (dai->name) - return dai->name; - if (dai->driver->name) return dai->driver->name; + if (dai->name) + return dai->name; + if (dai->component->name) return dai->component->name; -- 2.43.0

2 1

[PATCH v3] ASoC: cs-amp-lib: Add KUnit test for calibration helpers
by Richard Fitzgerald 05 Mar '24

05 Mar '24

Add a KUnit test for the cs-amp-lib library. This has test cases for cs_amp_get_efi_calibration_data() and cs_amp_write_cal_coeffs(). A KUNIT_STATIC_STUB_REDIRECT() has been added to cs_amp_get_efi_variable() and cs_amp_write_cal_coeff() so that the KUnit test can redirect these to test harness functions. Much of the testing involves invoking the same function with different parameters, i.e. the number of amps and the amp index within the array. This uses parameterization rather than looping. The idea is to avoid looping over configurations within one test case as that has a higher chance of having a bug that doesn't actually test all the expected cases. Having the test run exactly one configuration, and then tear-down, is less prone to accidentally skipped configurations. Signed-off-by: Richard Fitzgerald <rf(a)opensource.cirrus.com> --- include/sound/cs-amp-lib.h | 14 + sound/soc/codecs/Kconfig | 13 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/cs-amp-lib-test.c | 709 +++++++++++++++++++++++++++++ sound/soc/codecs/cs-amp-lib.c | 18 +- 5 files changed, 754 insertions(+), 2 deletions(-) create mode 100644 sound/soc/codecs/cs-amp-lib-test.c diff --git a/include/sound/cs-amp-lib.h b/include/sound/cs-amp-lib.h index 077fe36885b5..f481148735e1 100644 --- a/include/sound/cs-amp-lib.h +++ b/include/sound/cs-amp-lib.h @@ -49,4 +49,18 @@ int cs_amp_write_cal_coeffs(struct cs_dsp *dsp, const struct cirrus_amp_cal_data *data); int cs_amp_get_efi_calibration_data(struct device *dev, u64 target_uid, int amp_index, struct cirrus_amp_cal_data *out_data); + +struct cs_amp_test_hooks { + efi_status_t (*get_efi_variable)(efi_char16_t *name, + efi_guid_t *guid, + unsigned long *size, + void *buf); + + int (*write_cal_coeff)(struct cs_dsp *dsp, + const struct cirrus_amp_cal_controls *controls, + const char *ctl_name, u32 val); +}; + +extern const struct cs_amp_test_hooks * const cs_amp_test_hooks; + #endif /* CS_AMP_LIB_H */ diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 15f287784d8b..f78ea2f86fa6 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -732,6 +732,19 @@ config SND_SOC_CROS_EC_CODEC config SND_SOC_CS_AMP_LIB tristate +config SND_SOC_CS_AMP_LIB_TEST + tristate "KUnit test for Cirrus Logic cs-amp-lib" + depends on KUNIT + default KUNIT_ALL_TESTS + select SND_SOC_CS_AMP_LIB + help + This builds KUnit tests for the Cirrus Logic common + amplifier library. + For more information on KUnit and unit tests in general, + please refer to the KUnit documentation in + Documentation/dev-tools/kunit/. + If in doubt, say "N". + config SND_SOC_CS35L32 tristate "Cirrus Logic CS35L32 CODEC" depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 0fc40640e5d0..7c075539dc47 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -60,6 +60,7 @@ snd-soc-cpcap-objs := cpcap.o snd-soc-cq93vc-objs := cq93vc.o snd-soc-cros-ec-codec-objs := cros_ec_codec.o snd-soc-cs-amp-lib-objs := cs-amp-lib.o +snd-soc-cs-amp-lib-test-objs := cs-amp-lib-test.o snd-soc-cs35l32-objs := cs35l32.o snd-soc-cs35l33-objs := cs35l33.o snd-soc-cs35l34-objs := cs35l34.o @@ -454,6 +455,7 @@ obj-$(CONFIG_SND_SOC_CQ0093VC) += snd-soc-cq93vc.o obj-$(CONFIG_SND_SOC_CPCAP) += snd-soc-cpcap.o obj-$(CONFIG_SND_SOC_CROS_EC_CODEC) += snd-soc-cros-ec-codec.o obj-$(CONFIG_SND_SOC_CS_AMP_LIB) += snd-soc-cs-amp-lib.o +obj-$(CONFIG_SND_SOC_CS_AMP_LIB_TEST) += snd-soc-cs-amp-lib-test.o obj-$(CONFIG_SND_SOC_CS35L32) += snd-soc-cs35l32.o obj-$(CONFIG_SND_SOC_CS35L33) += snd-soc-cs35l33.o obj-$(CONFIG_SND_SOC_CS35L34) += snd-soc-cs35l34.o diff --git a/sound/soc/codecs/cs-amp-lib-test.c b/sound/soc/codecs/cs-amp-lib-test.c new file mode 100644 index 000000000000..15f991b2e16e --- /dev/null +++ b/sound/soc/codecs/cs-amp-lib-test.c @@ -0,0 +1,709 @@ +// SPDX-License-Identifier: GPL-2.0-only +// +// KUnit test for the Cirrus common amplifier library. +// +// Copyright (C) 2024 Cirrus Logic, Inc. and +// Cirrus Logic International Semiconductor Ltd. + +#include <kunit/test.h> +#include <kunit/static_stub.h> +#include <linux/firmware/cirrus/cs_dsp.h> +#include <linux/firmware/cirrus/wmfw.h> +#include <linux/gpio/driver.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/random.h> +#include <sound/cs-amp-lib.h> + +struct cs_amp_lib_test_priv { + struct platform_device amp_pdev; + + struct cirrus_amp_efi_data *cal_blob; + struct list_head ctl_write_list; +}; + +struct cs_amp_lib_test_ctl_write_entry { + struct list_head list; + unsigned int value; + char name[16]; +}; + +struct cs_amp_lib_test_param { + int num_amps; + int amp_index; +}; + +static void cs_amp_lib_test_init_dummy_cal_blob(struct kunit *test, int num_amps) +{ + struct cs_amp_lib_test_priv *priv = test->priv; + unsigned int blob_size; + + blob_size = offsetof(struct cirrus_amp_efi_data, data) + + sizeof(struct cirrus_amp_cal_data) * num_amps; + + priv->cal_blob = kunit_kzalloc(test, blob_size, GFP_KERNEL); + KUNIT_ASSERT_NOT_NULL(test, priv->cal_blob); + + priv->cal_blob->size = blob_size; + priv->cal_blob->count = num_amps; + + get_random_bytes(priv->cal_blob->data, sizeof(struct cirrus_amp_cal_data) * num_amps); +} + +static u64 cs_amp_lib_test_get_target_uid(struct kunit *test) +{ + struct cs_amp_lib_test_priv *priv = test->priv; + const struct cs_amp_lib_test_param *param = test->param_value; + u64 uid; + + uid = priv->cal_blob->data[param->amp_index].calTarget[1]; + uid <<= 32; + uid |= priv->cal_blob->data[param->amp_index].calTarget[0]; + + return uid; +} + +/* Redirected get_efi_variable to simulate that the file is too short */ +static efi_status_t cs_amp_lib_test_get_efi_variable_nohead(efi_char16_t *name, + efi_guid_t *guid, + unsigned long *size, + void *buf) +{ + if (!buf) { + *size = offsetof(struct cirrus_amp_efi_data, data) - 1; + return EFI_BUFFER_TOO_SMALL; + } + + return EFI_NOT_FOUND; +} + +/* Should return -EOVERFLOW if the header is larger than the EFI data */ +static void cs_amp_lib_test_cal_data_too_short_test(struct kunit *test) +{ + struct cs_amp_lib_test_priv *priv = test->priv; + struct cirrus_amp_cal_data result_data; + int ret; + + /* Redirect calls to get EFI data */ + kunit_activate_static_stub(test, + cs_amp_test_hooks->get_efi_variable, + cs_amp_lib_test_get_efi_variable_nohead); + + ret = cs_amp_get_efi_calibration_data(&priv->amp_pdev.dev, 0, 0, &result_data); + KUNIT_EXPECT_EQ(test, ret, -EOVERFLOW); + + kunit_deactivate_static_stub(test, cs_amp_test_hooks->get_efi_variable); +} + +/* Redirected get_efi_variable to simulate that the count is larger than the file */ +static efi_status_t cs_amp_lib_test_get_efi_variable_bad_count(efi_char16_t *name, + efi_guid_t *guid, + unsigned long *size, + void *buf) +{ + struct kunit *test = kunit_get_current_test(); + struct cs_amp_lib_test_priv *priv = test->priv; + + if (!buf) { + /* + * Return a size that is shorter than required for the + * declared number of entries. + */ + *size = priv->cal_blob->size - 1; + return EFI_BUFFER_TOO_SMALL; + } + + memcpy(buf, priv->cal_blob, priv->cal_blob->size - 1); + + return EFI_SUCCESS; +} + +/* Should return -EOVERFLOW if the entry count is larger than the EFI data */ +static void cs_amp_lib_test_cal_count_too_big_test(struct kunit *test) +{ + struct cs_amp_lib_test_priv *priv = test->priv; + struct cirrus_amp_cal_data result_data; + int ret; + + cs_amp_lib_test_init_dummy_cal_blob(test, 8); + + /* Redirect calls to get EFI data */ + kunit_activate_static_stub(test, + cs_amp_test_hooks->get_efi_variable, + cs_amp_lib_test_get_efi_variable_bad_count); + + ret = cs_amp_get_efi_calibration_data(&priv->amp_pdev.dev, 0, 0, &result_data); + KUNIT_EXPECT_EQ(test, ret, -EOVERFLOW); + + kunit_deactivate_static_stub(test, cs_amp_test_hooks->get_efi_variable); +} + +/* Redirected get_efi_variable to simulate that the variable not found */ +static efi_status_t cs_amp_lib_test_get_efi_variable_none(efi_char16_t *name, + efi_guid_t *guid, + unsigned long *size, + void *buf) +{ + return EFI_NOT_FOUND; +} + +/* If EFI doesn't contain a cal data variable the result should be -ENOENT */ +static void cs_amp_lib_test_no_cal_data_test(struct kunit *test) +{ + struct cs_amp_lib_test_priv *priv = test->priv; + struct cirrus_amp_cal_data result_data; + int ret; + + /* Redirect calls to get EFI data */ + kunit_activate_static_stub(test, + cs_amp_test_hooks->get_efi_variable, + cs_amp_lib_test_get_efi_variable_none); + + ret = cs_amp_get_efi_calibration_data(&priv->amp_pdev.dev, 0, 0, &result_data); + KUNIT_EXPECT_EQ(test, ret, -ENOENT); + + kunit_deactivate_static_stub(test, cs_amp_test_hooks->get_efi_variable); +} + +/* Redirected get_efi_variable to simulate reading a cal data blob */ +static efi_status_t cs_amp_lib_test_get_efi_variable(efi_char16_t *name, + efi_guid_t *guid, + unsigned long *size, + void *buf) +{ + static const efi_char16_t expected_name[] = L"CirrusSmartAmpCalibrationData"; + static const efi_guid_t expected_guid = + EFI_GUID(0x02f9af02, 0x7734, 0x4233, 0xb4, 0x3d, 0x93, 0xfe, 0x5a, 0xa3, 0x5d, 0xb3); + struct kunit *test = kunit_get_current_test(); + struct cs_amp_lib_test_priv *priv = test->priv; + + KUNIT_EXPECT_NOT_ERR_OR_NULL(test, name); + KUNIT_EXPECT_NOT_ERR_OR_NULL(test, guid); + KUNIT_EXPECT_NOT_ERR_OR_NULL(test, size); + + KUNIT_EXPECT_MEMEQ(test, name, expected_name, sizeof(expected_name)); + KUNIT_EXPECT_MEMEQ(test, guid, &expected_guid, sizeof(expected_guid)); + + if (!buf) { + *size = priv->cal_blob->size; + return EFI_BUFFER_TOO_SMALL; + } + + KUNIT_ASSERT_GE_MSG(test, ksize(buf), priv->cal_blob->size, "Buffer to small"); + + memcpy(buf, priv->cal_blob, priv->cal_blob->size); + + return EFI_SUCCESS; +} + +/* Get cal data block for a given amp, matched by target UID. */ +static void cs_amp_lib_test_get_efi_cal_by_uid_test(struct kunit *test) +{ + struct cs_amp_lib_test_priv *priv = test->priv; + const struct cs_amp_lib_test_param *param = test->param_value; + struct cirrus_amp_cal_data result_data; + u64 target_uid; + int ret; + + cs_amp_lib_test_init_dummy_cal_blob(test, param->num_amps); + + /* Redirect calls to get EFI data */ + kunit_activate_static_stub(test, + cs_amp_test_hooks->get_efi_variable, + cs_amp_lib_test_get_efi_variable); + + target_uid = cs_amp_lib_test_get_target_uid(test); + ret = cs_amp_get_efi_calibration_data(&priv->amp_pdev.dev, target_uid, -1, &result_data); + KUNIT_EXPECT_EQ(test, ret, 0); + + kunit_deactivate_static_stub(test, cs_amp_test_hooks->get_efi_variable); + + KUNIT_EXPECT_EQ(test, result_data.calTarget[0], target_uid & 0xFFFFFFFFULL); + KUNIT_EXPECT_EQ(test, result_data.calTarget[1], target_uid >> 32); + KUNIT_EXPECT_EQ(test, result_data.calTime[0], + priv->cal_blob->data[param->amp_index].calTime[0]); + KUNIT_EXPECT_EQ(test, result_data.calTime[1], + priv->cal_blob->data[param->amp_index].calTime[1]); + KUNIT_EXPECT_EQ(test, result_data.calAmbient, + priv->cal_blob->data[param->amp_index].calAmbient); + KUNIT_EXPECT_EQ(test, result_data.calStatus, + priv->cal_blob->data[param->amp_index].calStatus); + KUNIT_EXPECT_EQ(test, result_data.calR, + priv->cal_blob->data[param->amp_index].calR); +} + +/* Get cal data block for a given amp index without checking target UID. */ +static void cs_amp_lib_test_get_efi_cal_by_index_unchecked_test(struct kunit *test) +{ + struct cs_amp_lib_test_priv *priv = test->priv; + const struct cs_amp_lib_test_param *param = test->param_value; + struct cirrus_amp_cal_data result_data; + int ret; + + cs_amp_lib_test_init_dummy_cal_blob(test, param->num_amps); + + /* Redirect calls to get EFI data */ + kunit_activate_static_stub(test, + cs_amp_test_hooks->get_efi_variable, + cs_amp_lib_test_get_efi_variable); + + ret = cs_amp_get_efi_calibration_data(&priv->amp_pdev.dev, 0, + param->amp_index, &result_data); + KUNIT_EXPECT_EQ(test, ret, 0); + + kunit_deactivate_static_stub(test, cs_amp_test_hooks->get_efi_variable); + + KUNIT_EXPECT_EQ(test, result_data.calTime[0], + priv->cal_blob->data[param->amp_index].calTime[0]); + KUNIT_EXPECT_EQ(test, result_data.calTime[1], + priv->cal_blob->data[param->amp_index].calTime[1]); + KUNIT_EXPECT_EQ(test, result_data.calAmbient, + priv->cal_blob->data[param->amp_index].calAmbient); + KUNIT_EXPECT_EQ(test, result_data.calStatus, + priv->cal_blob->data[param->amp_index].calStatus); + KUNIT_EXPECT_EQ(test, result_data.calR, + priv->cal_blob->data[param->amp_index].calR); +} + +/* Get cal data block for a given amp index with checked target UID. */ +static void cs_amp_lib_test_get_efi_cal_by_index_checked_test(struct kunit *test) +{ + struct cs_amp_lib_test_priv *priv = test->priv; + const struct cs_amp_lib_test_param *param = test->param_value; + struct cirrus_amp_cal_data result_data; + u64 target_uid; + int ret; + + cs_amp_lib_test_init_dummy_cal_blob(test, param->num_amps); + + /* Redirect calls to get EFI data */ + kunit_activate_static_stub(test, + cs_amp_test_hooks->get_efi_variable, + cs_amp_lib_test_get_efi_variable); + + target_uid = cs_amp_lib_test_get_target_uid(test); + ret = cs_amp_get_efi_calibration_data(&priv->amp_pdev.dev, target_uid, + param->amp_index, &result_data); + KUNIT_EXPECT_EQ(test, ret, 0); + + kunit_deactivate_static_stub(test, cs_amp_test_hooks->get_efi_variable); + + KUNIT_EXPECT_EQ(test, result_data.calTime[0], + priv->cal_blob->data[param->amp_index].calTime[0]); + KUNIT_EXPECT_EQ(test, result_data.calTime[1], + priv->cal_blob->data[param->amp_index].calTime[1]); + KUNIT_EXPECT_EQ(test, result_data.calAmbient, + priv->cal_blob->data[param->amp_index].calAmbient); + KUNIT_EXPECT_EQ(test, result_data.calStatus, + priv->cal_blob->data[param->amp_index].calStatus); + KUNIT_EXPECT_EQ(test, result_data.calR, + priv->cal_blob->data[param->amp_index].calR); +} + +/* + * Get cal data block for a given amp index with checked target UID. + * The UID does not match so the result should be -ENOENT. + */ +static void cs_amp_lib_test_get_efi_cal_by_index_uid_mismatch_test(struct kunit *test) +{ + struct cs_amp_lib_test_priv *priv = test->priv; + const struct cs_amp_lib_test_param *param = test->param_value; + struct cirrus_amp_cal_data result_data; + u64 target_uid; + int ret; + + cs_amp_lib_test_init_dummy_cal_blob(test, param->num_amps); + + /* Redirect calls to get EFI data */ + kunit_activate_static_stub(test, + cs_amp_test_hooks->get_efi_variable, + cs_amp_lib_test_get_efi_variable); + + /* Get a target UID that won't match the entry */ + target_uid = ~cs_amp_lib_test_get_target_uid(test); + ret = cs_amp_get_efi_calibration_data(&priv->amp_pdev.dev, target_uid, + param->amp_index, &result_data); + KUNIT_EXPECT_EQ(test, ret, -ENOENT); + + kunit_deactivate_static_stub(test, cs_amp_test_hooks->get_efi_variable); +} + +/* + * Get cal data block for a given amp, where the cal data does not + * specify calTarget so the lookup falls back to using the index + */ +static void cs_amp_lib_test_get_efi_cal_by_index_fallback_test(struct kunit *test) +{ + struct cs_amp_lib_test_priv *priv = test->priv; + const struct cs_amp_lib_test_param *param = test->param_value; + struct cirrus_amp_cal_data result_data; + static const u64 bad_target_uid = 0xBADCA100BABABABAULL; + int i, ret; + + cs_amp_lib_test_init_dummy_cal_blob(test, param->num_amps); + + /* Make all the target values zero so they are ignored */ + for (i = 0; i < priv->cal_blob->count; ++i) { + priv->cal_blob->data[i].calTarget[0] = 0; + priv->cal_blob->data[i].calTarget[1] = 0; + } + + /* Redirect calls to get EFI data */ + kunit_activate_static_stub(test, + cs_amp_test_hooks->get_efi_variable, + cs_amp_lib_test_get_efi_variable); + + ret = cs_amp_get_efi_calibration_data(&priv->amp_pdev.dev, bad_target_uid, + param->amp_index, &result_data); + KUNIT_EXPECT_EQ(test, ret, 0); + + kunit_deactivate_static_stub(test, cs_amp_test_hooks->get_efi_variable); + + KUNIT_EXPECT_EQ(test, result_data.calTime[0], + priv->cal_blob->data[param->amp_index].calTime[0]); + KUNIT_EXPECT_EQ(test, result_data.calTime[1], + priv->cal_blob->data[param->amp_index].calTime[1]); + KUNIT_EXPECT_EQ(test, result_data.calAmbient, + priv->cal_blob->data[param->amp_index].calAmbient); + KUNIT_EXPECT_EQ(test, result_data.calStatus, + priv->cal_blob->data[param->amp_index].calStatus); + KUNIT_EXPECT_EQ(test, result_data.calR, + priv->cal_blob->data[param->amp_index].calR); +} + +/* + * If the target UID isn't present in the cal data, and there isn't an + * index to fall back do, the result should be -ENOENT. + */ +static void cs_amp_lib_test_get_efi_cal_uid_not_found_noindex_test(struct kunit *test) +{ + struct cs_amp_lib_test_priv *priv = test->priv; + struct cirrus_amp_cal_data result_data; + static const u64 bad_target_uid = 0xBADCA100BABABABAULL; + int i, ret; + + cs_amp_lib_test_init_dummy_cal_blob(test, 8); + + /* Make all the target values != bad_target_uid */ + for (i = 0; i < priv->cal_blob->count; ++i) { + priv->cal_blob->data[i].calTarget[0] &= ~(bad_target_uid & 0xFFFFFFFFULL); + priv->cal_blob->data[i].calTarget[1] &= ~(bad_target_uid >> 32); + } + + /* Redirect calls to get EFI data */ + kunit_activate_static_stub(test, + cs_amp_test_hooks->get_efi_variable, + cs_amp_lib_test_get_efi_variable); + + ret = cs_amp_get_efi_calibration_data(&priv->amp_pdev.dev, bad_target_uid, -1, + &result_data); + KUNIT_EXPECT_EQ(test, ret, -ENOENT); + + kunit_deactivate_static_stub(test, cs_amp_test_hooks->get_efi_variable); +} + +/* + * If the target UID isn't present in the cal data, and the index is + * out of range, the result should be -ENOENT. + */ +static void cs_amp_lib_test_get_efi_cal_uid_not_found_index_not_found_test(struct kunit *test) +{ + struct cs_amp_lib_test_priv *priv = test->priv; + struct cirrus_amp_cal_data result_data; + static const u64 bad_target_uid = 0xBADCA100BABABABAULL; + int i, ret; + + cs_amp_lib_test_init_dummy_cal_blob(test, 8); + + /* Make all the target values != bad_target_uid */ + for (i = 0; i < priv->cal_blob->count; ++i) { + priv->cal_blob->data[i].calTarget[0] &= ~(bad_target_uid & 0xFFFFFFFFULL); + priv->cal_blob->data[i].calTarget[1] &= ~(bad_target_uid >> 32); + } + + /* Redirect calls to get EFI data */ + kunit_activate_static_stub(test, + cs_amp_test_hooks->get_efi_variable, + cs_amp_lib_test_get_efi_variable); + + ret = cs_amp_get_efi_calibration_data(&priv->amp_pdev.dev, bad_target_uid, 99, + &result_data); + KUNIT_EXPECT_EQ(test, ret, -ENOENT); + + kunit_deactivate_static_stub(test, cs_amp_test_hooks->get_efi_variable); +} + +/* + * If the target UID isn't given, and the index is out of range, the + * result should be -ENOENT. + */ +static void cs_amp_lib_test_get_efi_cal_no_uid_index_not_found_test(struct kunit *test) +{ + struct cs_amp_lib_test_priv *priv = test->priv; + struct cirrus_amp_cal_data result_data; + int ret; + + cs_amp_lib_test_init_dummy_cal_blob(test, 8); + + /* Redirect calls to get EFI data */ + kunit_activate_static_stub(test, + cs_amp_test_hooks->get_efi_variable, + cs_amp_lib_test_get_efi_variable); + + ret = cs_amp_get_efi_calibration_data(&priv->amp_pdev.dev, 0, 99, &result_data); + KUNIT_EXPECT_EQ(test, ret, -ENOENT); + + kunit_deactivate_static_stub(test, cs_amp_test_hooks->get_efi_variable); +} + +/* If neither the target UID or the index is given the result should be -ENOENT. */ +static void cs_amp_lib_test_get_efi_cal_no_uid_no_index_test(struct kunit *test) +{ + struct cs_amp_lib_test_priv *priv = test->priv; + struct cirrus_amp_cal_data result_data; + int ret; + + cs_amp_lib_test_init_dummy_cal_blob(test, 8); + + /* Redirect calls to get EFI data */ + kunit_activate_static_stub(test, + cs_amp_test_hooks->get_efi_variable, + cs_amp_lib_test_get_efi_variable); + + ret = cs_amp_get_efi_calibration_data(&priv->amp_pdev.dev, 0, -1, &result_data); + KUNIT_EXPECT_EQ(test, ret, -ENOENT); + + kunit_deactivate_static_stub(test, cs_amp_test_hooks->get_efi_variable); +} + +/* + * If the UID is passed as 0 this must not match an entry with an + * unpopulated calTarget + */ +static void cs_amp_lib_test_get_efi_cal_zero_not_matched_test(struct kunit *test) +{ + struct cs_amp_lib_test_priv *priv = test->priv; + struct cirrus_amp_cal_data result_data; + int i, ret; + + cs_amp_lib_test_init_dummy_cal_blob(test, 8); + + /* Make all the target values zero so they are ignored */ + for (i = 0; i < priv->cal_blob->count; ++i) { + priv->cal_blob->data[i].calTarget[0] = 0; + priv->cal_blob->data[i].calTarget[1] = 0; + } + + /* Redirect calls to get EFI data */ + kunit_activate_static_stub(test, + cs_amp_test_hooks->get_efi_variable, + cs_amp_lib_test_get_efi_variable); + + ret = cs_amp_get_efi_calibration_data(&priv->amp_pdev.dev, 0, -1, &result_data); + KUNIT_EXPECT_EQ(test, ret, -ENOENT); + + kunit_deactivate_static_stub(test, cs_amp_test_hooks->get_efi_variable); +} + +static const struct cirrus_amp_cal_controls cs_amp_lib_test_calibration_controls = { + .alg_id = 0x9f210, + .mem_region = WMFW_ADSP2_YM, + .ambient = "CAL_AMBIENT", + .calr = "CAL_R", + .status = "CAL_STATUS", + .checksum = "CAL_CHECKSUM", +}; + +static int cs_amp_lib_test_write_cal_coeff(struct cs_dsp *dsp, + const struct cirrus_amp_cal_controls *controls, + const char *ctl_name, u32 val) +{ + struct kunit *test = kunit_get_current_test(); + struct cs_amp_lib_test_priv *priv = test->priv; + struct cs_amp_lib_test_ctl_write_entry *entry; + + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctl_name); + KUNIT_EXPECT_PTR_EQ(test, controls, &cs_amp_lib_test_calibration_controls); + + entry = kunit_kzalloc(test, sizeof(*entry), GFP_KERNEL); + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, entry); + + INIT_LIST_HEAD(&entry->list); + strscpy(entry->name, ctl_name, sizeof(entry->name)); + entry->value = val; + + list_add_tail(&entry->list, &priv->ctl_write_list); + + return 0; +} + +static void cs_amp_lib_test_write_cal_data_test(struct kunit *test) +{ + struct cs_amp_lib_test_priv *priv = test->priv; + struct cs_amp_lib_test_ctl_write_entry *entry; + struct cirrus_amp_cal_data data; + struct cs_dsp *dsp; + int ret; + + dsp = kunit_kzalloc(test, sizeof(*dsp), GFP_KERNEL); + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, dsp); + dsp->dev = &priv->amp_pdev.dev; + + get_random_bytes(&data, sizeof(data)); + + /* Redirect calls to write firmware controls */ + kunit_activate_static_stub(test, + cs_amp_test_hooks->write_cal_coeff, + cs_amp_lib_test_write_cal_coeff); + + ret = cs_amp_write_cal_coeffs(dsp, &cs_amp_lib_test_calibration_controls, &data); + KUNIT_EXPECT_EQ(test, ret, 0); + + kunit_deactivate_static_stub(test, cs_amp_test_hooks->write_cal_coeff); + + KUNIT_EXPECT_EQ(test, list_count_nodes(&priv->ctl_write_list), 4); + + /* Checksum control must be written last */ + entry = list_last_entry(&priv->ctl_write_list, typeof(*entry), list); + KUNIT_EXPECT_STREQ(test, entry->name, cs_amp_lib_test_calibration_controls.checksum); + KUNIT_EXPECT_EQ(test, entry->value, data.calR + 1); + list_del(&entry->list); + + entry = list_first_entry(&priv->ctl_write_list, typeof(*entry), list); + KUNIT_EXPECT_STREQ(test, entry->name, cs_amp_lib_test_calibration_controls.ambient); + KUNIT_EXPECT_EQ(test, entry->value, data.calAmbient); + list_del(&entry->list); + + entry = list_first_entry(&priv->ctl_write_list, typeof(*entry), list); + KUNIT_EXPECT_STREQ(test, entry->name, cs_amp_lib_test_calibration_controls.calr); + KUNIT_EXPECT_EQ(test, entry->value, data.calR); + list_del(&entry->list); + + entry = list_first_entry(&priv->ctl_write_list, typeof(*entry), list); + KUNIT_EXPECT_STREQ(test, entry->name, cs_amp_lib_test_calibration_controls.status); + KUNIT_EXPECT_EQ(test, entry->value, data.calStatus); +} + +static void cs_amp_lib_test_dev_release(struct device *dev) +{ +} + +static int cs_amp_lib_test_case_init(struct kunit *test) +{ + struct cs_amp_lib_test_priv *priv; + int ret; + + KUNIT_ASSERT_NOT_NULL(test, cs_amp_test_hooks); + + priv = kunit_kzalloc(test, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + test->priv = priv; + INIT_LIST_HEAD(&priv->ctl_write_list); + + /* Create dummy amp driver dev */ + priv->amp_pdev.name = "cs_amp_lib_test_drv"; + priv->amp_pdev.id = -1; + priv->amp_pdev.dev.release = cs_amp_lib_test_dev_release; + ret = platform_device_register(&priv->amp_pdev); + KUNIT_ASSERT_GE_MSG(test, ret, 0, "Failed to register amp platform device\n"); + + return 0; +} + +static void cs_amp_lib_test_case_exit(struct kunit *test) +{ + struct cs_amp_lib_test_priv *priv = test->priv; + + if (priv->amp_pdev.name) + platform_device_unregister(&priv->amp_pdev); +} + +static const struct cs_amp_lib_test_param cs_amp_lib_test_get_cal_param_cases[] = { + { .num_amps = 2, .amp_index = 0 }, + { .num_amps = 2, .amp_index = 1 }, + + { .num_amps = 3, .amp_index = 0 }, + { .num_amps = 3, .amp_index = 1 }, + { .num_amps = 3, .amp_index = 2 }, + + { .num_amps = 4, .amp_index = 0 }, + { .num_amps = 4, .amp_index = 1 }, + { .num_amps = 4, .amp_index = 2 }, + { .num_amps = 4, .amp_index = 3 }, + + { .num_amps = 5, .amp_index = 0 }, + { .num_amps = 5, .amp_index = 1 }, + { .num_amps = 5, .amp_index = 2 }, + { .num_amps = 5, .amp_index = 3 }, + { .num_amps = 5, .amp_index = 4 }, + + { .num_amps = 6, .amp_index = 0 }, + { .num_amps = 6, .amp_index = 1 }, + { .num_amps = 6, .amp_index = 2 }, + { .num_amps = 6, .amp_index = 3 }, + { .num_amps = 6, .amp_index = 4 }, + { .num_amps = 6, .amp_index = 5 }, + + { .num_amps = 8, .amp_index = 0 }, + { .num_amps = 8, .amp_index = 1 }, + { .num_amps = 8, .amp_index = 2 }, + { .num_amps = 8, .amp_index = 3 }, + { .num_amps = 8, .amp_index = 4 }, + { .num_amps = 8, .amp_index = 5 }, + { .num_amps = 8, .amp_index = 6 }, + { .num_amps = 8, .amp_index = 7 }, +}; + +static void cs_amp_lib_test_get_cal_param_desc(const struct cs_amp_lib_test_param *param, + char *desc) +{ + snprintf(desc, KUNIT_PARAM_DESC_SIZE, "num_amps:%d amp_index:%d", + param->num_amps, param->amp_index); +} + +KUNIT_ARRAY_PARAM(cs_amp_lib_test_get_cal, cs_amp_lib_test_get_cal_param_cases, + cs_amp_lib_test_get_cal_param_desc); + +static struct kunit_case cs_amp_lib_test_cases[] = { + /* Tests for getting calibration data from EFI */ + KUNIT_CASE(cs_amp_lib_test_cal_data_too_short_test), + KUNIT_CASE(cs_amp_lib_test_cal_count_too_big_test), + KUNIT_CASE(cs_amp_lib_test_no_cal_data_test), + KUNIT_CASE(cs_amp_lib_test_get_efi_cal_uid_not_found_noindex_test), + KUNIT_CASE(cs_amp_lib_test_get_efi_cal_uid_not_found_index_not_found_test), + KUNIT_CASE(cs_amp_lib_test_get_efi_cal_no_uid_index_not_found_test), + KUNIT_CASE(cs_amp_lib_test_get_efi_cal_no_uid_no_index_test), + KUNIT_CASE(cs_amp_lib_test_get_efi_cal_zero_not_matched_test), + KUNIT_CASE_PARAM(cs_amp_lib_test_get_efi_cal_by_uid_test, + cs_amp_lib_test_get_cal_gen_params), + KUNIT_CASE_PARAM(cs_amp_lib_test_get_efi_cal_by_index_unchecked_test, + cs_amp_lib_test_get_cal_gen_params), + KUNIT_CASE_PARAM(cs_amp_lib_test_get_efi_cal_by_index_checked_test, + cs_amp_lib_test_get_cal_gen_params), + KUNIT_CASE_PARAM(cs_amp_lib_test_get_efi_cal_by_index_uid_mismatch_test, + cs_amp_lib_test_get_cal_gen_params), + KUNIT_CASE_PARAM(cs_amp_lib_test_get_efi_cal_by_index_fallback_test, + cs_amp_lib_test_get_cal_gen_params), + + /* Tests for writing calibration data */ + KUNIT_CASE(cs_amp_lib_test_write_cal_data_test), + + { } /* terminator */ +}; + +static struct kunit_suite cs_amp_lib_test_suite = { + .name = "snd-soc-cs-amp-lib-test", + .init = cs_amp_lib_test_case_init, + .exit = cs_amp_lib_test_case_exit, + .test_cases = cs_amp_lib_test_cases, +}; + +kunit_test_suite(cs_amp_lib_test_suite); + +MODULE_IMPORT_NS(SND_SOC_CS_AMP_LIB); +MODULE_DESCRIPTION("KUnit test for Cirrus Logic amplifier library"); +MODULE_AUTHOR("Richard Fitzgerald <rf(a)opensource.cirrus.com>"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/cs-amp-lib.c b/sound/soc/codecs/cs-amp-lib.c index 4e2e5157a73f..01ef4db5407d 100644 --- a/sound/soc/codecs/cs-amp-lib.c +++ b/sound/soc/codecs/cs-amp-lib.c @@ -6,6 +6,7 @@ // Cirrus Logic International Semiconductor Ltd. #include <asm/byteorder.h> +#include <kunit/static_stub.h> #include <linux/dev_printk.h> #include <linux/efi.h> #include <linux/firmware/cirrus/cs_dsp.h> @@ -27,6 +28,8 @@ static int cs_amp_write_cal_coeff(struct cs_dsp *dsp, __be32 beval = cpu_to_be32(val); int ret; + KUNIT_STATIC_STUB_REDIRECT(cs_amp_write_cal_coeff, dsp, controls, ctl_name, val); + if (IS_REACHABLE(CONFIG_FW_CS_DSP)) { mutex_lock(&dsp->pwr_lock); cs_ctl = cs_dsp_get_ctl(dsp, ctl_name, controls->mem_region, controls->alg_id); @@ -84,7 +87,7 @@ int cs_amp_write_cal_coeffs(struct cs_dsp *dsp, const struct cirrus_amp_cal_controls *controls, const struct cirrus_amp_cal_data *data) { - if (IS_REACHABLE(CONFIG_FW_CS_DSP)) + if (IS_REACHABLE(CONFIG_FW_CS_DSP) || IS_ENABLED(CONFIG_SND_SOC_CS_AMP_LIB_TEST)) return _cs_amp_write_cal_coeffs(dsp, controls, data); else return -ENODEV; @@ -98,6 +101,8 @@ static efi_status_t cs_amp_get_efi_variable(efi_char16_t *name, { u32 attr; + KUNIT_STATIC_STUB_REDIRECT(cs_amp_get_efi_variable, name, guid, size, buf); + if (IS_ENABLED(CONFIG_EFI)) return efi.get_variable(name, guid, &attr, size, buf); @@ -250,13 +255,22 @@ static int _cs_amp_get_efi_calibration_data(struct device *dev, u64 target_uid, int cs_amp_get_efi_calibration_data(struct device *dev, u64 target_uid, int amp_index, struct cirrus_amp_cal_data *out_data) { - if (IS_ENABLED(CONFIG_EFI)) + if (IS_ENABLED(CONFIG_EFI) || IS_ENABLED(CONFIG_SND_SOC_CS_AMP_LIB_TEST)) return _cs_amp_get_efi_calibration_data(dev, target_uid, amp_index, out_data); else return -ENOENT; } EXPORT_SYMBOL_NS_GPL(cs_amp_get_efi_calibration_data, SND_SOC_CS_AMP_LIB); +static const struct cs_amp_test_hooks cs_amp_test_hook_ptrs = { + .get_efi_variable = cs_amp_get_efi_variable, + .write_cal_coeff = cs_amp_write_cal_coeff, +}; + +const struct cs_amp_test_hooks * const cs_amp_test_hooks = + PTR_IF(IS_ENABLED(CONFIG_SND_SOC_CS_AMP_LIB_TEST), &cs_amp_test_hook_ptrs); +EXPORT_SYMBOL_NS_GPL(cs_amp_test_hooks, SND_SOC_CS_AMP_LIB); + MODULE_DESCRIPTION("Cirrus Logic amplifier library"); MODULE_AUTHOR("Richard Fitzgerald <rf(a)opensource.cirrus.com>"); MODULE_LICENSE("GPL"); -- 2.39.2

2 1

[PATCH v10] The tas2783 is a smart audio amplifier with integrated MIPI SoundWire interface (Version 1.2.1 compliant), I2C, and I2S/TDM interfaces designed for portable applications. An on-chip DSP supports Texas Instruments SmartAmp speaker protection algorithm. The integrated speaker voltage and current sense provides for real-time monitoring of loudspeakers.
by Shenghao Ding 05 Mar '24

05 Mar '24

The ASoC component provides the majority of the functionality of the device, all the audio functions. Signed-off-by: Shenghao Ding <shenghao-ding(a)ti.com> --- Change in v10: - simplify tasdevice_set_sdw_stream - fixed some Linux coding style - fixed the spelling mistakes - Select left/right channel based on unique id - a longer description has been added - remove unused crc8 in KCONFIG - Invert of RE here means reciprocal of RE - correct indentation - correct the wrong pow calibrated register - correct comment on RESET register - fixed usually lines don't end with an open parenthesis - fixed tasdevice_sdw_shutdown - use defines for function, entity, etc. for readable - remove unnecessary codec_lock in component_probe() - remove struct sdw_stream_data - remove unused macro definitions - use BIT(2) and BIT(1) instead of 0x2 and 0x1 - implement pm_runtime - reg_start is u8, reg_start + i only adds i byte, it should be reg_start + i * 4, because the calibration values - fixed total_sz in tas2783_calibration - add a define for TASDEVICE_REG(0, 0, 0x0a) - rework macro style in header file - Add select CRC32 - rewrite the mute and the return value handling - Add comments on bin file - Add link_id into the fw name to distinguish the same sdw id on different sdw id. - remove unnecessary mutex_lock - use set_active() in tasdevice_io_init and move all other parts in the probe. - move pm_runtime_get_noresume to the probe - fix the return value of putvol function - add put_noidle in tasdevice_sdw_remove - remove unused header file(of.h) - correct the style of the multi-line comment - Set the readable registers in tas2783_readable_register for debugfs - Use new PM macros - Use default put and get inline SOC_SINGLE_RANGE_TLV and SOC_SINGLE_SX_TLV - Use respective %pt to log the calibrated time - Remove unnecessary struct tm - Add trailing comma tasdevice_dapm_widgets and tasdevice_audio_map - Rewrite the return value handling in tasdevice_sdw_probe - use dev_num instead of id.unique_id - rework the log - Add code to check the size of calibrated data in UEFI - Add description of Layout of calibrated Data in UEFI - switch back link_id and unique_id to identify the devcie - unique_id offset as the device index of the calibrated data - update calibrated data layout stored in UEFI, add link_id and unique_id into the calibrated data in case of tas2783 sitting in different SDQW buses. --- sound/soc/codecs/Kconfig | 16 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/tas2783-sdw.c | 932 +++++++++++++++++++++++++++++++++ sound/soc/codecs/tas2783.h | 106 ++++ 4 files changed, 1056 insertions(+) create mode 100644 sound/soc/codecs/tas2783-sdw.c create mode 100644 sound/soc/codecs/tas2783.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 59f9742e9ff4..6ba3fd0c0811 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -247,6 +247,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_TAS2781_COMLIB imply SND_SOC_TAS2781_FMWLIB imply SND_SOC_TAS2781_I2C + imply SND_SOC_TAS2783 imply SND_SOC_TAS5086 imply SND_SOC_TAS571X imply SND_SOC_TAS5720 @@ -1847,6 +1848,21 @@ config SND_SOC_TAS2781_I2C algo coefficient setting, for one, two or even multiple TAS2781 chips. +config SND_SOC_TAS2783 + tristate "Texas Instruments TAS2783 speaker amplifier (sdw)" + depends on SOUNDWIRE + depends on EFI + select REGMAP + select REGMAP_SOUNDWIRE + select CRC32 + select CRC32_SARWATE + help + Enable support for Texas Instruments TAS2783 Smart Amplifier + Digital input mono Class-D and DSP-inside audio power amplifiers. + TAS2783 supports the MIPI SoundWire v1.2 compatible interface + for audio and control data. At the end of calibrated data appends + the crc data with crc32_sarwate for error detection. + config SND_SOC_TAS5086 tristate "Texas Instruments TAS5086 speaker amplifier" depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index f53baa2b9565..6afceb126ae3 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -284,6 +284,7 @@ snd-soc-tas2770-objs := tas2770.o snd-soc-tas2781-comlib-objs := tas2781-comlib.o snd-soc-tas2781-fmwlib-objs := tas2781-fmwlib.o snd-soc-tas2781-i2c-objs := tas2781-i2c.o +snd-soc-tas2783-objs := tas2783-sdw.o snd-soc-tfa9879-objs := tfa9879.o snd-soc-tfa989x-objs := tfa989x.o snd-soc-tlv320adc3xxx-objs := tlv320adc3xxx.o @@ -664,6 +665,7 @@ obj-$(CONFIG_SND_SOC_TAS2780) += snd-soc-tas2780.o obj-$(CONFIG_SND_SOC_TAS2781_COMLIB) += snd-soc-tas2781-comlib.o obj-$(CONFIG_SND_SOC_TAS2781_FMWLIB) += snd-soc-tas2781-fmwlib.o obj-$(CONFIG_SND_SOC_TAS2781_I2C) += snd-soc-tas2781-i2c.o +obj-$(CONFIG_SND_SOC_TAS2783) += snd-soc-tas2783.o obj-$(CONFIG_SND_SOC_TAS5086) += snd-soc-tas5086.o obj-$(CONFIG_SND_SOC_TAS571X) += snd-soc-tas571x.o obj-$(CONFIG_SND_SOC_TAS5720) += snd-soc-tas5720.o diff --git a/sound/soc/codecs/tas2783-sdw.c b/sound/soc/codecs/tas2783-sdw.c new file mode 100644 index 000000000000..7bd151942a83 --- /dev/null +++ b/sound/soc/codecs/tas2783-sdw.c @@ -0,0 +1,932 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// ALSA SoC Texas Instruments TAS2783 Audio Smart Amplifier +// +// Copyright (C) 2023 - 2024 Texas Instruments Incorporated +// https://www.ti.com +// +// Author: Baojun Xu <baojun.xu(a)ti.com> +// Kevin Lu <kevin-lu(a)ti.com> +// Shenghao Ding <shenghao-ding(a)ti.com> +// + +#include <asm/unaligned.h> +#include <linux/acpi.h> +#include <linux/crc32.h> +#include <linux/efi.h> +#include <linux/err.h> +#include <linux/firmware.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/pm.h> +#include <linux/pm_runtime.h> +#include <linux/regmap.h> +#include <linux/soundwire/sdw.h> +#include <linux/soundwire/sdw_registers.h> +#include <linux/soundwire/sdw_type.h> +#include <sound/pcm_params.h> +#include <sound/sdw.h> +#include <sound/soc.h> +#include <sound/tlv.h> + +#include <sound/tas2781-tlv.h> +#include "tas2783.h" + +static const unsigned int tas2783_cali_reg[] = { + TAS2783_CALIBRATION_RE, /* Resistance */ + TAS2783_CALIBRATION_RE_LOW, /* Low limitation of RE */ + TAS2783_CALIBRATION_INV_RE, /* Reciprocal of RE */ + TAS2783_CALIBRATION_POW, /* RMS Power */ + TAS2783_CALIBRATION_TLIMIT /* Temperature limitation */ +}; + +static const struct reg_default tas2783_reg_defaults[] = { + /* Default values for ROM mode. Activated. */ + { 0x8002, 0x1a }, /* AMP inactive. */ + { 0x8097, 0xc8 }, + { 0x80b5, 0x74 }, + { 0x8099, 0x20 }, + { 0xfe8d, 0x0d }, + { 0xfebe, 0x4a }, + { 0x8230, 0x00 }, + { 0x8231, 0x00 }, + { 0x8232, 0x00 }, + { 0x8233, 0x01 }, + { 0x8418, 0x00 }, /* Set volume to 0 dB. */ + { 0x8419, 0x00 }, + { 0x841a, 0x00 }, + { 0x841b, 0x00 }, + { 0x8428, 0x40 }, /* Unmute channel */ + { 0x8429, 0x00 }, + { 0x842a, 0x00 }, + { 0x842b, 0x00 }, + { 0x8548, 0x00 }, /* Set volume to 0 dB. */ + { 0x8549, 0x00 }, + { 0x854a, 0x00 }, + { 0x854b, 0x00 }, + { 0x8558, 0x40 }, /* Unmute channel */ + { 0x8559, 0x00 }, + { 0x855a, 0x00 }, + { 0x855b, 0x00 }, + { 0x800a, 0x3a }, /* Enable both channel */ + { 0x800e, 0x44 }, + { 0x800f, 0x40 }, + { 0x805c, 0x99 }, + { SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP, TAS2783_SDCA_ENT_FU21, + TAS2783_SDCA_CTL_FU_MUTE, 0), 0 }, + { SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP, TAS2783_SDCA_ENT_FU21, + TAS2783_SDCA_CTL_FU_VOLUME, 0), 0 }, + { SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP, TAS2783_SDCA_ENT_FU23, + TAS2783_SDCA_CTL_FU_MUTE, 0), 0 }, +}; + +static bool tas2783_readable_register(struct device *dev, + unsigned int reg) +{ + switch (reg) { + case 0x8000 ... 0x807F: /* Page 0 */ + return true; + default: + return false; + } +} + +static bool tas2783_volatile_register(struct device *dev, + unsigned int reg) +{ + switch (reg) { + /* + * Only software reset register was volatiled. + * Bit is self clearing. + * 0b = Don't reset + * 1b = reset + */ + case 0x8001: + return true; + default: + return false; + } +} + +static const struct regmap_config tasdevice_regmap = { + .reg_bits = 32, + .val_bits = 8, + .readable_reg = tas2783_readable_register, + .volatile_reg = tas2783_volatile_register, + .max_register = 0x44ffffff, + .reg_defaults = tas2783_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(tas2783_reg_defaults), + .cache_type = REGCACHE_RBTREE, + .use_single_read = true, + .use_single_write = true, +}; + +static const struct snd_kcontrol_new tas2783_snd_controls[] = { + SOC_SINGLE_RANGE_TLV("Digital Volume", TAS2783_DVC_LVL, + 0, 0, 200, 1, dvc_tlv), + SOC_SINGLE_SX_TLV("Amp Gain Volume", TAS2783_AMP_LEVEL, + 1, 0, 20, amp_vol_tlv), +}; + +static void tas2783_apply_calibv1(struct tasdevice_priv *tas_dev, + unsigned int *cali_data) +{ + struct regmap *map = tas_dev->regmap; + u8 *cali_start; + u16 offset; + int ret; + + if (!tas_dev->sdw_peripheral) { + dev_err(tas_dev->dev, "%s: peripheral doesn't exist.\n", + __func__); + return; + } + + offset = tas_dev->sdw_peripheral->id.unique_id - + TAS2783_UNIQUE_ID_BASE; + if (offset >= TAS2783_MAX_DEV_NUM) { + dev_err(tas_dev->dev, "%s: offset(%u) is out of range.\n", + __func__, offset); + return; + } + + /* + * The area saving tas2783 calibrated data is specified by its + * unique_id offset. cali_start is the first address of current + * tas2783's calibrated data. + */ + cali_start = (u8 *)(cali_data + offset * sizeof(tas2783_cali_reg)); + for (int i = 0; i < ARRAY_SIZE(tas2783_cali_reg); i++) { + ret = regmap_bulk_write(map, tas2783_cali_reg[i], + &cali_start[4 * i], 4); + if (ret) { + dev_err(tas_dev->dev, "Cali failed %x:%d\n", + tas2783_cali_reg[i], ret); + break; + } + } +} + +static void tas2783_apply_calibv2(struct tasdevice_priv *tas_dev, + unsigned int *cali_data) +{ + const unsigned int arr_size = ARRAY_SIZE(tas2783_cali_reg); + struct regmap *map = tas_dev->regmap; + unsigned int dev_sum = cali_data[1], i, j, k; + u8 *cali_start; + u16 dev_info; + int ret; + + if (!tas_dev->sdw_peripheral) { + dev_err(tas_dev->dev, "%s: peripheral doesn't exist.\n", + __func__); + return; + } + + dev_info = tas_dev->sdw_peripheral->bus->link_id | + tas_dev->sdw_peripheral->id.unique_id << 16; + + /* + * The area saving tas2783 calibrated data is specified by its + * unique_id offset. cali_start is the first address of current + * tas2783's calibrated data. + */ + cali_start = (u8 *)&cali_data[3]; + for (i = 0; i < dev_sum; i++) { + k = i * (arr_size + 1) + 3; + if (dev_info != cali_data[k]) { + for (j = 0; j < arr_size; j++) { + k = 4 * (k + 1 + j); + ret = regmap_bulk_write(map, + tas2783_cali_reg[j], + &cali_start[k], 4); + if (ret) { + dev_err(tas_dev->dev, + "Cali failed %x:%d\n", + tas2783_cali_reg[j], ret); + break; + } + } + break; + } + } +} + +/* + * Load the calibration data, including speaker impedance, f0, etc. + * Calibration is done by the manufacturer in the factory. The calibration + * data are used by the algorithm for calculating the speaker temperature, + * speaker membrane excursion and f0 in real time during playback. + * The DSP will work with default data values if calibrated data are + * missing or are invalid. + * Layout of calibrated Data in UEFI(total 256 bytes): + * V2: + * ChipID (2783, 4 bytes) + * Device-Sum (4 bytes) + * TimeStamp of Calibration (4 bytes) + * for (i = 0; i < Device-Sum; i++) { + * Device #i info () { + * SDW link id (2bytes) + * SDW unique_id (2bytes) + * } + * Calibrated Data of Device #i (20 bytes) + * } + * CRC (4 bytes) + * Reserved (the rest) + * Or + * V1: + * Calibrated Data of Dev 0(unique_id offset 0) (20 bytes) + * Calibrated Data of Dev 1(unique_id offset 1) (20 bytes) + * Calibrated Data of Dev 2(unique_id offset 2) (20 bytes) + * Calibrated Data of Dev 3(unique_id offset 3) (20 bytes) + * Calibrated Data of Dev 4(unique_id offset 4) (20 bytes) + * Calibrated Data of Dev 5(unique_id offset 5) (20 bytes) + * Calibrated Data of Dev 6(unique_id offset 6) (20 bytes) + * Calibrated Data of Dev 7(unique_id offset 7) (20 bytes) + * TimeStamp of Calibration (4 bytes) + * CRC (4 bytes) + * Reserved (88 bytes) + */ +static void tas2783_calibration(struct tasdevice_priv *tas_dev) +{ + efi_guid_t efi_guid = EFI_GUID(0x1f52d2a1, 0xbb3a, 0x457d, 0xbc, + 0x09, 0x43, 0xa3, 0xf4, 0x31, 0x0a, 0x92); + static efi_char16_t efi_name[] = L"CALI_DATA"; + struct calibration_data cali_data; + unsigned int *tmp_val; + unsigned int crc; + efi_status_t status; + + cali_data.total_sz = 0; + + status = efi.get_variable(efi_name, &efi_guid, NULL, + &cali_data.total_sz, NULL); + if (status == EFI_BUFFER_TOO_SMALL + && cali_data.total_sz < TAS2783_MAX_CALIDATA_SIZE) { + status = efi.get_variable(efi_name, &efi_guid, NULL, + &cali_data.total_sz, + cali_data.data); + dev_dbg(tas_dev->dev, "%s: cali get %lx bytes result:%ld\n", + __func__, cali_data.total_sz, status); + } + if (status != 0) { + /* Failed got calibration data from EFI. */ + dev_dbg(tas_dev->dev, "No calibration data in UEFI."); + return; + } + + tmp_val = (unsigned int *)cali_data.data; + + if (tmp_val[0] == 2783) { + /* Calibrated Data V2 */ + unsigned int dev_sum = tmp_val[1]; + + if (dev_sum > TAS2783_MAX_DEV_NUM || + dev_sum == 0) { + dev_dbg(tas_dev->dev, "No dev in calibrated data V2."); + return; + } + crc = crc32(~0, cali_data.data, 12 + dev_sum * 24) ^ ~0; + if (crc == tmp_val[3 + dev_sum * 6]) { + tas2783_apply_calibv2(tas_dev, tmp_val); + dev_dbg(tas_dev->dev, "V2: %ptTs", &tmp_val[40]); + } else { + dev_dbg(tas_dev->dev, + "V2: CRC 0x%08x not match 0x%08x\n", + crc, tmp_val[41]); + } + } else { + /* Calibrated Data V1 */ + /* 8 devs * 20 bytes calibrated data/dev + 4 bytes Timestamp */ + crc = crc32(~0, cali_data.data, 164) ^ ~0; + if (crc == tmp_val[41]) { + /* Date and time of when calibration was done. */ + tas2783_apply_calibv1(tas_dev, tmp_val); + dev_dbg(tas_dev->dev, "V1: %ptTs", &tmp_val[40]); + } else { + dev_dbg(tas_dev->dev, + "V1: CRC 0x%08x not match 0x%08x\n", + crc, tmp_val[41]); + } + } +} + +static void tasdevice_dspfw_ready(const struct firmware *fmw, + void *context) +{ + struct tasdevice_priv *tas_dev = + (struct tasdevice_priv *) context; + struct tas2783_firmware_node *p; + struct regmap *map = tas_dev->regmap; + unsigned char *buf = NULL; + int offset = 0, img_sz; + int ret; + + if (!fmw || !fmw->data) { + dev_warn(tas_dev->dev, + "%s: failed to read %s: work in bypass-dsp mode.\n", + __func__, tas_dev->dspfw_binaryname); + return; + } + buf = (unsigned char *)fmw->data; + + img_sz = get_unaligned_le32(&buf[offset]); + offset += sizeof(img_sz); + if (img_sz != fmw->size) { + dev_warn(tas_dev->dev, "%s: size not matching, %d %u.", + __func__, (int)fmw->size, img_sz); + return; + } + + while (offset < img_sz) { + p = (struct tas2783_firmware_node *)(buf + offset); + if (p->length > 1) { + ret = regmap_bulk_write(map, p->download_addr, + buf + offset + sizeof(unsigned int) * 5, p->length); + } else { + ret = regmap_write(map, p->download_addr, + *(buf + offset + sizeof(unsigned int) * 5)); + } + + if (ret != 0) { + dev_dbg(tas_dev->dev, + "%s: load FW fail: %d, work in bypass.\n", + __func__, ret); + return; + } + offset += sizeof(unsigned int) * 5 + p->length; + } + + tas2783_calibration(tas_dev); +} + +static const struct snd_soc_dapm_widget tasdevice_dapm_widgets[] = { + SND_SOC_DAPM_AIF_IN("ASI", "ASI Playback", 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_OUT("ASI OUT", "ASI Capture", 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_OUTPUT("OUT"), + SND_SOC_DAPM_INPUT("DMIC"), +}; + +static const struct snd_soc_dapm_route tasdevice_audio_map[] = { + {"OUT", NULL, "ASI"}, + {"ASI OUT", NULL, "DMIC"}, +}; + +static int tasdevice_set_sdw_stream(struct snd_soc_dai *dai, + void *sdw_stream, int direction) +{ + snd_soc_dai_dma_data_set(dai, direction, sdw_stream); + + return 0; +} + +static void tasdevice_sdw_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + snd_soc_dai_set_dma_data(dai, substream, NULL); +} + +static int tasdevice_sdw_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct tasdevice_priv *tas_priv = + snd_soc_component_get_drvdata(component); + struct sdw_stream_config stream_config = {0}; + struct sdw_port_config port_config = {0}; + struct sdw_stream_runtime *sdw_stream; + int ret; + + dev_dbg(dai->dev, "%s: dai_name %s", __func__, dai->name); + sdw_stream = snd_soc_dai_get_dma_data(dai, substream); + + if (!sdw_stream) + return -EINVAL; + + if (!tas_priv->sdw_peripheral) + return -EINVAL; + + /* SoundWire specific configuration */ + snd_sdw_params_to_config(substream, params, + &stream_config, &port_config); + + /* port 1 for playback */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + port_config.num = 1; + else + port_config.num = 2; + + ret = sdw_stream_add_slave(tas_priv->sdw_peripheral, + &stream_config, &port_config, 1, sdw_stream); + if (ret) { + dev_err(dai->dev, "%s: Unable to configure port\n", __func__); + return ret; + } + + dev_dbg(dai->dev, "%s: format: %i rate: %i\n", __func__, + params_format(params), params_rate(params)); + + return 0; +} + +static int tasdevice_sdw_pcm_hw_free(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct tasdevice_priv *tas_priv = + snd_soc_component_get_drvdata(component); + struct sdw_stream_runtime *sdw_stream = + snd_soc_dai_get_dma_data(dai, substream); + + if (!tas_priv->sdw_peripheral) + return -EINVAL; + + sdw_stream_remove_slave(tas_priv->sdw_peripheral, sdw_stream); + + return 0; +} + +static int tasdevice_mute(struct snd_soc_dai *dai, int mute, + int direction) +{ + struct snd_soc_component *component = dai->component; + struct tasdevice_priv *tas_dev = + snd_soc_component_get_drvdata(component); + struct regmap *map = tas_dev->regmap; + int ret; + + dev_dbg(tas_dev->dev, "%s: %d.\n", __func__, mute); + + if (mute) { + if (direction == SNDRV_PCM_STREAM_CAPTURE) { + ret = regmap_update_bits(map, TAS2873_REG_PWR_CTRL, + TAS2783_REG_AEF_MASK, + TAS2783_REG_AEF_INACTIVE); + if (ret) + dev_err(tas_dev->dev, + "%s: Disable AEF failed.\n", __func__); + } else { + /* FU23 mute (0x40400108) */ + ret = regmap_write(map, + SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP, + TAS2783_SDCA_ENT_FU23, + TAS2783_SDCA_CTL_FU_MUTE, 0), 1); + if (ret) { + dev_err(tas_dev->dev, + "%s: FU23 mute failed.\n", __func__); + goto out; + } + /* + * Both playback and echo data will be shutdown in + * playback stream. + */ + ret = regmap_update_bits(map, TAS2873_REG_PWR_CTRL, + TAS2783_REG_PWR_MODE_MASK | + TAS2783_REG_AEF_MASK, + TAS2783_REG_PWR_MODE_ACTIVE | + TAS2783_REG_PWR_MODE_SW_PWD); + if (ret) { + dev_err(tas_dev->dev, + "%s: PWR&AEF shutdown failed.\n", + __func__); + goto out; + } + tas_dev->pstream = false; + } + } else { + /* FU23 Unmute, 0x40400108. */ + if (direction == SNDRV_PCM_STREAM_PLAYBACK) { + ret = regmap_write(map, + SDW_SDCA_CTL(TAS2783_FUNC_TYPE_SMART_AMP, + TAS2783_SDCA_ENT_FU23, + TAS2783_SDCA_CTL_FU_MUTE, 0), 0); + if (ret) { + dev_err(tas_dev->dev, + "%s: FU23 Unmute failed.\n", __func__); + goto out; + } + ret = regmap_update_bits(map, TAS2873_REG_PWR_CTRL, + TAS2783_REG_PWR_MODE_MASK, + TAS2783_REG_PWR_MODE_ACTIVE); + if (ret) { + dev_err(tas_dev->dev, + "%s: PWR Unmute failed.\n", __func__); + goto out; + } + tas_dev->pstream = true; + } else { + /* Capture stream is the echo ref data for voice. + * Without playback, it can't be active. + */ + if (tas_dev->pstream == true) { + ret = regmap_update_bits(map, + TAS2873_REG_PWR_CTRL, + TAS2783_REG_AEF_MASK, + TAS2783_REG_AEF_ACTIVE); + if (ret) { + dev_err(tas_dev->dev, + "%s: AEF enable failed.\n", + __func__); + goto out; + } + } else { + dev_err(tas_dev->dev, + "%s: No playback, no AEF!", __func__); + ret = -EINVAL; + } + } + } +out: + if (ret) + dev_err(tas_dev->dev, "Mute or unmute %d failed %d.\n", + mute, ret); + + return ret; +} + +static const struct snd_soc_dai_ops tasdevice_dai_ops = { + .mute_stream = tasdevice_mute, + .hw_params = tasdevice_sdw_hw_params, + .hw_free = tasdevice_sdw_pcm_hw_free, + .set_stream = tasdevice_set_sdw_stream, + .shutdown = tasdevice_sdw_shutdown, +}; + +static struct snd_soc_dai_driver tasdevice_dai_driver[] = { + { + .name = "tas2783-codec", + .id = 0, + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 4, + .rates = TAS2783_DEVICE_RATES, + .formats = TAS2783_DEVICE_FORMATS, + }, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 4, + .rates = TAS2783_DEVICE_RATES, + .formats = TAS2783_DEVICE_FORMATS, + }, + .ops = &tasdevice_dai_ops, + .symmetric_rate = 1, + }, +}; + +static int tasdevice_comp_probe(struct snd_soc_component *comp) +{ + struct tasdevice_priv *tas_dev = snd_soc_component_get_drvdata(comp); + acpi_handle handle = ACPI_HANDLE(tas_dev->dev); + const struct firmware *fw_entry = NULL; + const char *sub = NULL; + int ret; + + if (handle) { + sub = acpi_get_subsystem_id(handle); + if (IS_ERR(sub)) + sub = NULL; + } + + tas_dev->component = comp; + + /* + * Each tas2783 in the system has its own dspfw. + */ + if (comp->name_prefix) { + /* + * name_prefix.bin stores the dsp firmware including speaker + * protection algorithm, audio acoustic algorithm, speaker + * characters and algorithm params, it must be copied into + * firmware folder. + */ + scnprintf(tas_dev->dspfw_binaryname, + TAS2783_DSPFW_FILENAME_LEN, "%s-tas2783.bin", + comp->name_prefix); + } else { + /* Compatible with the previous naming rule */ + if (sub) { + /* + * subsys_id-link_id[0,1,...,N]-unique_id[1,...,4].bin + * stores the dsp firmware including speaker protection + * algorithm, audio acoustic algorithm, speaker + * characters and algorithm params, it must be copied + * into firmware folder. + */ + scnprintf(tas_dev->dspfw_binaryname, + TAS2783_DSPFW_FILENAME_LEN, + "%s-%d-%d.bin", sub, + tas_dev->sdw_peripheral->bus->link_id, + tas_dev->sdw_peripheral->id.unique_id); + } else { + /* + * tas2783-link_id[0,1,...,N]-unique_id[1,...,4].bin + * stores the dsp firmware including speaker protection + * algorithm, audio acoustic algorithm, speaker + * characters and algorithm params, it must be copied + * into firmware folder. + */ + scnprintf(tas_dev->dspfw_binaryname, + TAS2783_DSPFW_FILENAME_LEN, + "tas2783-%d-%d.bin", + tas_dev->sdw_peripheral->bus->link_id, + tas_dev->sdw_peripheral->id.unique_id); + } + } + + ret = request_firmware(&fw_entry, tas_dev->dspfw_binaryname, + tas_dev->dev); + if (ret) { + dev_err(tas_dev->dev, + "%s: request_firmware %x open status: %d.\n", __func__, + tas_dev->sdw_peripheral->id.unique_id, ret); + goto out; + } + + tasdevice_dspfw_ready(fw_entry, tas_dev); + +out: + if (fw_entry) + release_firmware(fw_entry); + return 0; +} + +static const struct snd_soc_component_driver + soc_codec_driver_tasdevice = { + .probe = tasdevice_comp_probe, + .controls = tas2783_snd_controls, + .num_controls = ARRAY_SIZE(tas2783_snd_controls), + .dapm_widgets = tasdevice_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(tasdevice_dapm_widgets), + .dapm_routes = tasdevice_audio_map, + .num_dapm_routes = ARRAY_SIZE(tasdevice_audio_map), + .idle_bias_on = 1, + .endianness = 1, +}; + +static int tasdevice_init(struct tasdevice_priv *tas_dev) +{ + int ret; + + dev_set_drvdata(tas_dev->dev, tas_dev); + + ret = devm_snd_soc_register_component(tas_dev->dev, + &soc_codec_driver_tasdevice, + tasdevice_dai_driver, ARRAY_SIZE(tasdevice_dai_driver)); + if (ret) { + dev_err(tas_dev->dev, "%s: codec register error:%d.\n", + __func__, ret); + return ret; + } + + /* set autosuspend parameters */ + pm_runtime_set_autosuspend_delay(tas_dev->dev, 3000); + pm_runtime_use_autosuspend(tas_dev->dev); + + /* make sure the device does not suspend immediately */ + pm_runtime_mark_last_busy(tas_dev->dev); + pm_runtime_enable(tas_dev->dev); + + return 0; +} + +static int tasdevice_read_prop(struct sdw_slave *slave) +{ + struct sdw_slave_prop *prop = &slave->prop; + struct sdw_dpn_prop *dpn; + unsigned long addr; + int nval, i, j; + u32 bit; + + prop->scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY; + prop->quirks = SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY; + + prop->paging_support = true; + + /* first we need to allocate memory for set bits in port lists */ + prop->source_ports = BIT(2); /* BITMAP: 00000100 */ + prop->sink_ports = BIT(1); /* BITMAP: 00000010 */ + + nval = hweight32(prop->source_ports); + prop->src_dpn_prop = devm_kcalloc(&slave->dev, nval, + sizeof(*prop->src_dpn_prop), GFP_KERNEL); + if (!prop->src_dpn_prop) + return -ENOMEM; + + i = 0; + dpn = prop->src_dpn_prop; + addr = prop->source_ports; + for_each_set_bit(bit, &addr, 32) { + dpn[i].num = bit; + dpn[i].type = SDW_DPN_FULL; + dpn[i].simple_ch_prep_sm = true; + dpn[i].ch_prep_timeout = 10; + i++; + } + + /* do this again for sink now */ + nval = hweight32(prop->sink_ports); + prop->sink_dpn_prop = devm_kcalloc(&slave->dev, nval, + sizeof(*prop->sink_dpn_prop), GFP_KERNEL); + if (!prop->sink_dpn_prop) + return -ENOMEM; + + j = 0; + dpn = prop->sink_dpn_prop; + addr = prop->sink_ports; + for_each_set_bit(bit, &addr, 32) { + dpn[j].num = bit; + dpn[j].type = SDW_DPN_FULL; + dpn[j].simple_ch_prep_sm = true; + dpn[j].ch_prep_timeout = 10; + j++; + } + + /* set the timeout values */ + prop->clk_stop_timeout = 20; + + return 0; +} + +static int tasdevice_io_init(struct device *dev, + struct sdw_slave *slave) +{ + struct tasdevice_priv *tas_priv = dev_get_drvdata(dev); + int ret; + + regcache_cache_only(tas_priv->regmap, false); + + if (tas_priv->first_hw_init) { + regcache_cache_bypass(tas_priv->regmap, true); + } else { + /* + * PM runtime is only enabled when a Slave reports as Attached + * Update count of parent 'active' children. + */ + pm_runtime_set_active(&slave->dev); + } + + /* sw reset */ + ret = regmap_write(tas_priv->regmap, TAS2873_REG_SWRESET, + TAS2873_REG_SWRESET_RESET); + if (ret) { + dev_err(tas_priv->dev, "Reset failed.\n"); + goto out; + } + + if (tas_priv->first_hw_init) { + regcache_cache_bypass(tas_priv->regmap, false); + regcache_mark_dirty(tas_priv->regmap); + } + + tas_priv->first_hw_init = true; + tas_priv->hw_init = true; + +out: + return ret; +} + +static int tasdevice_update_status(struct sdw_slave *slave, + enum sdw_slave_status status) +{ + struct tasdevice_priv *tas_priv = dev_get_drvdata(&slave->dev); + + /* Update the status */ + tas_priv->status = status; + + if (status == SDW_SLAVE_UNATTACHED) + tas_priv->hw_init = false; + /* + * Perform initialization only if slave status + * is present and hw_init flag is false + */ + if (tas_priv->hw_init || tas_priv->status != SDW_SLAVE_ATTACHED) + return 0; + + /* perform I/O transfers required for Slave initialization */ + return tasdevice_io_init(&slave->dev, slave); +} + +/* + * slave_ops: callbacks for get_clock_stop_mode, clock_stop and + * port_prep are not defined for now + */ +static const struct sdw_slave_ops tasdevice_sdw_ops = { + .read_prop = tasdevice_read_prop, + .update_status = tasdevice_update_status, +}; + +static int tasdevice_sdw_probe(struct sdw_slave *peripheral, + const struct sdw_device_id *id) +{ + struct device *dev = &peripheral->dev; + struct tasdevice_priv *tas_dev; + + tas_dev = devm_kzalloc(dev, sizeof(*tas_dev), GFP_KERNEL); + if (!tas_dev) + return -ENOMEM; + + tas_dev->dev = dev; + tas_dev->chip_id = id->driver_data; + tas_dev->sdw_peripheral = peripheral; + /* + * Mark hw_init to false + * HW init will be performed when device reports present + */ + tas_dev->hw_init = false; + tas_dev->first_hw_init = false; + + dev_set_drvdata(dev, tas_dev); + + tas_dev->regmap = devm_regmap_init_sdw(peripheral, &tasdevice_regmap); + if (IS_ERR(tas_dev->regmap)) + return dev_err_probe(dev, PTR_ERR(tas_dev->regmap), + "Failed devm_regmap_init_sdw."); + + return tasdevice_init(tas_dev); +} + +static int tasdevice_sdw_remove(struct sdw_slave *peripheral) +{ + struct tasdevice_priv *tas_dev = dev_get_drvdata(&peripheral->dev); + + if (tas_dev->first_hw_init) + pm_runtime_disable(tas_dev->dev); + + return 0; +} + +static const struct sdw_device_id tasdevice_sdw_id[] = { + SDW_SLAVE_ENTRY(0x0102, 0x0000, 0), + {} +}; +MODULE_DEVICE_TABLE(sdw, tasdevice_sdw_id); + +static int __maybe_unused tas2783_sdca_dev_suspend(struct device *dev) +{ + struct tasdevice_priv *tas_priv = dev_get_drvdata(dev); + + if (!tas_priv->hw_init) + return 0; + + regcache_cache_only(tas_priv->regmap, true); + + return 0; +} + +#define TAS2783_PROBE_TIMEOUT_MS 5000 + +static int __maybe_unused tas2783_sdca_dev_resume(struct device *dev) +{ + struct sdw_slave *slave = dev_to_sdw_dev(dev); + struct tasdevice_priv *tas_priv = dev_get_drvdata(dev); + unsigned long time; + + if (!tas_priv->first_hw_init) + return 0; + + if (!slave->unattach_request) + goto regmap_sync; + + time = wait_for_completion_timeout(&slave->initialization_complete, + msecs_to_jiffies(TAS2783_PROBE_TIMEOUT_MS)); + if (!time) { + dev_err(&slave->dev, "Init not complete, timed out\n"); + sdw_show_ping_status(slave->bus, true); + + return -ETIMEDOUT; + } + +regmap_sync: + slave->unattach_request = 0; + regcache_cache_only(tas_priv->regmap, false); + regcache_sync(tas_priv->regmap); + + return 0; +} + +static const struct dev_pm_ops tas2783_sdca_pm = { + SYSTEM_SLEEP_PM_OPS(tas2783_sdca_dev_suspend, + tas2783_sdca_dev_resume) + RUNTIME_PM_OPS(tas2783_sdca_dev_suspend, + tas2783_sdca_dev_resume, NULL) +}; + +static struct sdw_driver tasdevice_sdw_driver = { + .driver = { + .name = "slave-tas2783", + .pm = &tas2783_sdca_pm, + }, + .probe = tasdevice_sdw_probe, + .remove = tasdevice_sdw_remove, + .ops = &tasdevice_sdw_ops, + .id_table = tasdevice_sdw_id, +}; + +module_sdw_driver(tasdevice_sdw_driver); + +MODULE_AUTHOR("Baojun Xu <baojun.xu(a)ti.com>"); +MODULE_AUTHOR("Shenghao Ding <shenghao-ding(a)ti.com>"); +MODULE_DESCRIPTION("ASoC TAS2783 SoundWire Driver"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/tas2783.h b/sound/soc/codecs/tas2783.h new file mode 100644 index 000000000000..631776dcec4c --- /dev/null +++ b/sound/soc/codecs/tas2783.h @@ -0,0 +1,106 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * ALSA SoC Texas Instruments TAS2783 Audio Smart Amplifier + * + * Copyright (C) 2023 - 2024 Texas Instruments Incorporated + * https://www.ti.com + * + * Author: Baojun Xu <baojun.xu(a)ti.com> + * Shenghao Ding <shenghao-ding(a)ti.com> + */ + +#ifndef __TAS2783_H__ +#define __TAS2783_H__ + +/* Unique id start */ +#define TAS2783_UNIQUE_ID_BASE 0x08 +#define TAS2783_MAX_DEV_NUM 8 + +#define TAS2783_DEVICE_RATES (SNDRV_PCM_RATE_44100 | \ + SNDRV_PCM_RATE_48000 | \ + SNDRV_PCM_RATE_96000 | \ + SNDRV_PCM_RATE_88200) + +#define TAS2783_DEVICE_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | \ + SNDRV_PCM_FMTBIT_S32_LE) + +/* BOOK, PAGE Control Register */ +#define TASDEVICE_REG(book, page, reg) ((book * 256 * 256) + 0x8000 + \ + (page * 128) + reg) + +/*Software Reset */ +#define TAS2873_REG_SWRESET TASDEVICE_REG(0x0, 0x00, 0x01) +#define TAS2873_REG_SWRESET_MASK BIT(0) +#define TAS2873_REG_SWRESET_RESET BIT(0) + +#define TAS2873_REG_PWR_CTRL TASDEVICE_REG(0x0, 0x00, 0x02) +#define TAS2783_REG_AEF_MASK GENMASK(4, 3) +#define TAS2783_REG_AEF_ACTIVE 0 +#define TAS2783_REG_AEF_INACTIVE GENMASK(4, 3) +#define TAS2783_REG_PWR_MODE_MASK GENMASK(2, 0) +#define TAS2783_REG_PWR_MODE_ACTIVE 0 +#define TAS2783_REG_PWR_MODE_SW_PWD BIT(1) + +#define TAS2783_REG_TDM_RX_CFG TASDEVICE_REG(0x0, 0x00, 0x0a) + +/* Volume control */ +#define TAS2783_DVC_LVL TASDEVICE_REG(0x0, 0x00, 0x1a) +#define TAS2783_AMP_LEVEL TASDEVICE_REG(0x0, 0x00, 0x03) +#define TAS2783_AMP_LEVEL_MASK GENMASK(5, 1) + +/* Calibration data */ +#define TAS2783_CALIBRATION_RE TASDEVICE_REG(0x0, 0x17, 0x74) +#define TAS2783_CALIBRATION_RE_LOW TASDEVICE_REG(0x0, 0x18, 0x14) +#define TAS2783_CALIBRATION_INV_RE TASDEVICE_REG(0x0, 0x18, 0x0c) +#define TAS2783_CALIBRATION_POW TASDEVICE_REG(0x0, 0x13, 0x70) +#define TAS2783_CALIBRATION_TLIMIT TASDEVICE_REG(0x0, 0x18, 0x7c) + +/* TAS2783 SDCA Control - function number */ +#define TAS2783_FUNC_TYPE_SMART_AMP 0x01 + +/* TAS2783 SDCA entity */ +#define TAS2783_SDCA_ENT_FU21 0x01 +#define TAS2783_SDCA_ENT_FU23 0x02 + +/* TAS2783 SDCA control */ +#define TAS2783_SDCA_CTL_REQ_POWER_STATE 0x01 +#define TAS2783_SDCA_CTL_FU_MUTE 0x01 +#define TAS2783_SDCA_CTL_FU_VOLUME 0x02 +#define TAS2783_SDCA_CTL_UDMPU_CLUSTER 0x10 + +#define TAS2783_DEVICE_CHANNEL_LEFT 1 +#define TAS2783_DEVICE_CHANNEL_RIGHT 2 +#define TAS2783_DSPFW_FILENAME_LEN 64 + +#define TAS2783_MAX_CALIDATA_SIZE 256 + +struct tas2783_firmware_node { + unsigned int vendor_id; + unsigned int file_id; + unsigned int version_id; + unsigned int length; + unsigned int download_addr; +}; + +struct calibration_data { + unsigned long total_sz; + unsigned char data[TAS2783_MAX_CALIDATA_SIZE]; +}; + +struct tasdevice_priv { + struct snd_soc_component *component; + struct sdw_slave *sdw_peripheral; + enum sdw_slave_status status; + struct sdw_bus_params params; + struct regmap *regmap; + struct device *dev; + unsigned char dspfw_binaryname[TAS2783_DSPFW_FILENAME_LEN]; + unsigned char dev_name[32]; + unsigned int chip_id; + bool pstream; + bool hw_init; + bool first_hw_init; +}; + +#endif /*__TAS2783_H__ */ -- 2.34.1

2 1

[PATCH] mfd: cs42l43: Fix wrong GPIO_FN_SEL and SPI_CLK_CONFIG1 defaults
by Maciej Strozek 05 Mar '24

05 Mar '24

Two regs have wrong values in existing fields, change them to match the datasheet. Fixes: ace6d1448138 ("mfd: cs42l43: Add support for cs42l43 core driver") Signed-off-by: Maciej Strozek <mstrozek(a)opensource.cirrus.com> --- drivers/mfd/cs42l43.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mfd/cs42l43.c b/drivers/mfd/cs42l43.c index 73c88ee6a866..1cea3f8f467d 100644 --- a/drivers/mfd/cs42l43.c +++ b/drivers/mfd/cs42l43.c @@ -84,7 +84,7 @@ const struct reg_default cs42l43_reg_default[CS42L43_N_DEFAULTS] = { { CS42L43_DRV_CTRL_5, 0x136C00C0 }, { CS42L43_GPIO_CTRL1, 0x00000707 }, { CS42L43_GPIO_CTRL2, 0x00000000 }, - { CS42L43_GPIO_FN_SEL, 0x00000000 }, + { CS42L43_GPIO_FN_SEL, 0x00000004 }, { CS42L43_MCLK_SRC_SEL, 0x00000000 }, { CS42L43_SAMPLE_RATE1, 0x00000003 }, { CS42L43_SAMPLE_RATE2, 0x00000003 }, @@ -217,7 +217,7 @@ const struct reg_default cs42l43_reg_default[CS42L43_N_DEFAULTS] = { { CS42L43_CTRL_REG, 0x00000006 }, { CS42L43_FDIV_FRAC, 0x40000000 }, { CS42L43_CAL_RATIO, 0x00000080 }, - { CS42L43_SPI_CLK_CONFIG1, 0x00000000 }, + { CS42L43_SPI_CLK_CONFIG1, 0x00000001 }, { CS42L43_SPI_CONFIG1, 0x00000000 }, { CS42L43_SPI_CONFIG2, 0x00000000 }, { CS42L43_SPI_CONFIG3, 0x00000001 }, -- 2.30.2

3 2

[BUG] snd_fireface: frozen buffer with full system lockup
by edmund.raile 04 Mar '24

04 Mar '24

Hello, I want to report a bug with snd_fireface. issue audio suddenly freezes, repeating the last buffer to infinity other symptoms Most of the time, the GUI also freezes to a point that no interaction is possible. Not even a user console can be reached (ctrl + alt + F#). The only way to get the system back in this scenario is to use REISUB or power it down, I can not reach any console. Luckily, sometimes the kernel messages at the bottom are written to the logfile. occurrence This issue is triggered by more "stressful" circumstances, specifically while using the Windows VST Kontakt in linux-native reaper through yabridge (wine). The timeframe is 5-20 minutes. Reaper connects to the interface using ALSA, no other application is playing audio. My default sample rate is 96k, increasing buffer size to 512 samples decreases CPU load but does not prevent this crash. variables I tried to exclude OS Manjaro or fresh Artix install makes no difference host application the crash happens just as well with linux-native bitwig under similar circumstances wine variants wine, wine-staging, wine-tkg w esync and fsync patches The reason why I attribute both these issues to snd_firewire is that I get no freezes / instabilities at all under these circumstances: * in Linux, using an usb audio interface or the onboard audio instead. To me, this suggests Wine, Reaper and Kontakt are not likely the culprit. * in Windows, using RME's dirver. To me, this suggests FW643 and my platform have no issue working together and the FireFace works as it should. * in Linux, passing the FW643 card through to a windows VM with vfio-pci. Here I am just booting the same physical drive in QEMU, so using the same RME driver. To me, this suggests there is no strange interaction between linux and FW643. system Interface: RME FireFace 800 FireWire controller: LSI FW643 rev 8 Platform: MSI ms7d25 Z690 Kernel: 6.8.0-rc5-1-mainline #8 SMP PREEMPT_DYNAMIC OS: Artix Xfce video driver: mesa An related issue? During normal use, as of recent kernel versions, just playing back audio from any pulse audio application, I get a similar freeze but less severe: no other applications are blocked and it can be removed by just stoping playback, then after 5 seconds the audible freeze stops and I can start playback again. This happens less often, 5-60 minutes between freezes. I managed to capture this unicorn event yesterday in a relatively short file using 'sudo trace-cmd record -e snd_firewire_lib:amdtp_packet', maybe it can give you a hint as to what may be going on: https://pixeldrain.com/u/tgoSA1mk I tried to do the same for my real issue (the one with the full system freeze but I can not stop the recording and the output after rebooting are files split by cpu cores. I hope this is the right place to turn to for help. It has prevented me from using my interface in linux for audio production for a long time and I want to help fix it. If I can provide any form of further assistance or somehow collect any more data, please let me know. Kind regards, Edmund Raile. watchdog: Watchdog detected hard LOCKUP on cpu 13 Modules linked in: ntfs3 fuse 8021q garp mrp stp llc bnep bluetooth ecdh_generic rfkill vfat fat snd_sof_pci_intel_tgl snd_sof_intel_hda_common soundwire_intel snd_sof_intel_hda_mlink snd_hda_codec_hdmi soundwire_cadence snd_sof_intel_hda snd_sof_pci snd_sof_xtensa_dsp snd_sof intel_rapl_msr snd_sof_utils intel_rapl_common snd_soc_hdac_hda snd_hda_ext_core snd_soc_acpi_intel_match intel_uncore_frequency intel_uncore_frequency_common snd_soc_acpi intel_tcc_cooling soundwire_generic_allocation snd_hda_codec_realtek x86_pkg_temp_thermal soundwire_bus intel_powerclamp snd_hda_codec_generic snd_soc_core coretemp snd_compress kvm_intel ac97_bus snd_pcm_dmaengine snd_hda_intel snd_usb_audio snd_intel_dspcfg snd_fireface snd_intel_sdw_acpi kvm snd_usbmidi_lib snd_dice snd_hda_codec snd_firewire_lib snd_ump snd_hda_core snd_rawmidi irqbypass mc snd_hwdep snd_seq_device rapl iTCO_wdt snd_pcm intel_pmc_bxt intel_cstate mei_pxp mei_hdcp iTCO_vendor_support ee1004 snd_timer intel_uncore psmouse pcspkr crypto_user spi_nor snd i2c_i801 mei_me mousedev wacom joydev mtd igc soundcore i2c_smbus intel_pmc_core intel_vsec mei pmt_telemetry pmt_class mac_hid coreboot_table intel_scu_pltdrv ext4 crc32c_generic crc16 mbcache jbd2 hid_logitech ff_memless hid_logitech_hidpp hid_logitech_dj dm_crypt cbc uas usb_storage encrypted_keys trusted asn1_encoder tee dm_mod usbhid crct10dif_pclmul crc32_pclmul crc32c_intel polyval_clmulni polyval_generic gf128mul ghash_clmulni_intel sha512_ssse3 sha256_ssse3 sha1_ssse3 serio_raw aesni_intel atkbd nvme libps2 spi_intel_pci vivaldi_fmap firewire_ohci crypto_simd nvme_core firewire_core cryptd xhci_pci spi_intel nvme_auth xhci_pci_renesas i8042 crc_itu_t serio i915 i2c_algo_bit drm_buddy video wmi ttm intel_gtt drm_display_helper cec CPU: 13 PID: 1993 Comm: reaper/audio Not tainted 6.8.0-rc5-1-mainline #8 c2061649224b2c533bd915b824b700586979f2da Hardware name: Micro-Star International Co., Ltd. MS-7D25/PRO Z690-A DDR4(MS-7D25), BIOS Dasharo (coreboot+UEFI) v1.1.3 01/17/2024 RIP: 0010:tasklet_unlock_spin_wait+0xd/0x20 Code: c0 c3 cc cc cc cc 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 eb 02 f3 90 <48> 8b 47 08 a8 02 75 f6 c3 cc cc cc cc 66 0f 1f 44 00 00 90 90 90 RSP: 0018:ffffb828c1cdbd08 EFLAGS: 00000002 RAX: 0000000000000002 RBX: ffff951841aba028 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff951841a2aa70 RDI: ffff951841aba0a8 RBP: ffffb828c1cdbea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000075800 R14: ffff951846a9f600 R15: 0000000000000000 FS: 00007f7f394006c0(0000) GS:ffff952b9fb40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc65c2a0000 CR3: 000000018516a000 CR4: 0000000000f50ef0 PKRU: 55555554 Call Trace: <NMI> ? watchdog_hardlockup_check+0xfc/0x1d0 ? __perf_event_overflow+0xe5/0x2a0 ? handle_pmi_common+0x16f/0x380 ? intel_pmu_handle_irq+0x104/0x480 ? perf_event_nmi_handler+0x2a/0x50 ? nmi_handle+0x5e/0x150 ? default_do_nmi+0x40/0x100 ? exc_nmi+0x139/0x1c0 ? end_repeat_nmi+0xf/0x60 ? tasklet_unlock_spin_wait+0xd/0x20 ? tasklet_unlock_spin_wait+0xd/0x20 ? tasklet_unlock_spin_wait+0xd/0x20 </NMI> <TASK> ohci_flush_iso_completions+0x1d/0x100 [firewire_ohci 83160820eab58a73fec0d1e78730dd51dd0ac98c] amdtp_domain_stream_pcm_pointer+0x41/0x50 [snd_firewire_lib 95578abd4cf50f7c2e87b0d8233b959be2154fc3] snd_pcm_update_hw_ptr0+0x6c/0x430 [snd_pcm df3bd3d8840cfa728bc0f17b93055a5a1595ec6d] ? sched_clock_cpu+0xf/0x190 ? __smp_call_single_queue+0xad/0x120 snd_pcm_delay+0x33/0x140 [snd_pcm df3bd3d8840cfa728bc0f17b93055a5a1595ec6d] snd_pcm_common_ioctl+0x922/0x12b0 [snd_pcm df3bd3d8840cfa728bc0f17b93055a5a1595ec6d] ? wake_up_q+0x4e/0x90 ? futex_wake+0x159/0x190 snd_pcm_ioctl+0x2e/0x50 [snd_pcm df3bd3d8840cfa728bc0f17b93055a5a1595ec6d] __x64_sys_ioctl+0x94/0xd0 do_syscall_64+0x86/0x170 ? do_syscall_64+0x96/0x170 ? do_syscall_64+0x96/0x170 ? do_syscall_64+0x96/0x170 ? do_syscall_64+0x96/0x170 ? __irq_exit_rcu+0x4b/0xc0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 RIP: 0033:0x7f7f47cfd4ff Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff ff 77 18 48 8b 44 24 18 64 48 2b 04 25 28 00 00 RSP: 002b:00007f7f393ffd50 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000003cfc060 RCX: 00007f7f47cfd4ff RDX: 00007f7f393ffdf0 RSI: 0000000080084121 RDI: 000000000000000a RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000004 R10: 00007f7f393ffb20 R11: 0000000000000246 R12: 0000000000005000 R13: 0000000003272a80 R14: 0000000000000050 R15: 00000000032706c0 </TASK> watchdog: Watchdog detected hard LOCKUP on cpu 6 CPU: 6 PID: 0 Comm: swapper/6 Not tainted 6.8.0-rc5-1-mainline #8 c2061649224b2c533bd915b824b700586979f2da Hardware name: Micro-Star International Co., Ltd. MS-7D25/PRO Z690-A DDR4(MS-7D25), BIOS Dasharo (coreboot+UEFI) v1.1.3 01/17/2024 RIP: 0010:native_queued_spin_lock_slowpath+0x6e/0x2e0 Code: 77 7f f0 0f ba 2b 08 0f 92 c2 8b 03 0f b6 d2 c1 e2 08 30 e4 09 d0 3d ff 00 00 00 77 5b 85 c0 74 10 0f b6 03 84 c0 74 09 f3 90 <0f> b6 03 84 c0 75 f7 b8 01 00 00 00 66 89 03 65 48 ff 05 83 a6 23 RSP: 0018:ffffb828c01ece08 EFLAGS: 00000002 RAX: 0000000000000001 RBX: ffff951846a9f6f8 RCX: 0000000000000300 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff951846a9f6f8 RBP: ffff95184684c438 R08: ffff951879f3f800 R09: ffff951841a94028 R10: ffff951879f3f800 R11: 0000000000000000 R12: 0000000000000031 R13: 0000000000000000 R14: ffff9518a562e000 R15: ffff9518c49e5800 FS: 0000000000000000(0000) GS:ffff952b9f980000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000001010fdac8 CR3: 000000018516a000 CR4: 0000000000f50ef0 PKRU: 55555554 Call Trace: <NMI> ? watchdog_hardlockup_check+0xfc/0x1d0 ? __perf_event_overflow+0xe5/0x2a0 ? handle_pmi_common+0x16f/0x380 ? intel_pmu_handle_irq+0x104/0x480 ? perf_event_nmi_handler+0x2a/0x50 ? nmi_handle+0x5e/0x150 ? default_do_nmi+0x40/0x100 ? exc_nmi+0x139/0x1c0 ? end_repeat_nmi+0xf/0x60 ? native_queued_spin_lock_slowpath+0x6e/0x2e0 ? native_queued_spin_lock_slowpath+0x6e/0x2e0 ? native_queued_spin_lock_slowpath+0x6e/0x2e0 </NMI> <IRQ> _raw_spin_lock_irqsave+0x3d/0x50 snd_pcm_period_elapsed+0x18/0x40 [snd_pcm df3bd3d8840cfa728bc0f17b93055a5a1595ec6d] process_rx_packets+0x245/0x5a0 [snd_firewire_lib 95578abd4cf50f7c2e87b0d8233b959be2154fc3] ? irqtime_account_irq+0x40/0xc0 irq_target_callback+0x16/0x20 [snd_firewire_lib 95578abd4cf50f7c2e87b0d8233b959be2154fc3] handle_it_packet+0x135/0x150 [firewire_ohci 83160820eab58a73fec0d1e78730dd51dd0ac98c] context_tasklet+0x140/0x160 [firewire_ohci 83160820eab58a73fec0d1e78730dd51dd0ac98c] tasklet_action_common.isra.0+0x146/0x240 __do_softirq+0xc9/0x2c8 __irq_exit_rcu+0xa3/0xc0 common_interrupt+0x86/0xa0 </IRQ> <TASK> asm_common_interrupt+0x26/0x40 RIP: 0010:cpuidle_enter_state+0xcc/0x440 Code: 2a 39 36 ff e8 05 f1 ff ff 8b 53 04 49 89 c5 0f 1f 44 00 00 31 ff e8 83 38 35 ff 45 84 ff 0f 85 56 02 00 00 fb 0f 1f 44 00 00 <45> 85 f6 0f 88 85 01 00 00 49 63 d6 48 8d 04 52 48 8d 04 82 49 8d RSP: 0018:ffffb828c00ffe90 EFLAGS: 00000246 RAX: ffff952b9f9b4800 RBX: ffff952b9f9be208 RCX: 000000000000001f RDX: 0000000000000006 RSI: 0000000022b8e38e RDI: 0000000000000000 RBP: 0000000000000001 R08: 0000000000000000 R09: 00000000000001c8 R10: 0000000000000018 R11: ffff952b9f9b31e4 R12: ffffffff83f49780 R13: 0000006b6114102b R14: 0000000000000001 R15: 0000000000000000 cpuidle_enter+0x2d/0x40 do_idle+0x1d8/0x230 cpu_startup_entry+0x2a/0x30 start_secondary+0x11e/0x140 secondary_startup_64_no_verify+0x184/0x18b </TASK> rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: rcu: \x096-...0: (1 GPs behind) idle=d7ec/1/0x4000000000000002 softirq=52862/52863 fqs=5201 rcu: \x0913-...0: (1 GPs behind) idle=c9d4/1/0x4000000000000000 softirq=53654/53655 fqs=5201 rcu: \x09(detected by 2, t=18002 jiffies, g=76629, q=5124 ncpus=16) Sending NMI from CPU 2 to CPUs 6: NMI backtrace for cpu 6 CPU: 6 PID: 0 Comm: swapper/6 Not tainted 6.8.0-rc5-1-mainline #8 c2061649224b2c533bd915b824b700586979f2da Hardware name: Micro-Star International Co., Ltd. MS-7D25/PRO Z690-A DDR4(MS-7D25), BIOS Dasharo (coreboot+UEFI) v1.1.3 01/17/2024 RIP: 0010:native_queued_spin_lock_slowpath+0x6e/0x2e0 Code: 77 7f f0 0f ba 2b 08 0f 92 c2 8b 03 0f b6 d2 c1 e2 08 30 e4 09 d0 3d ff 00 00 00 77 5b 85 c0 74 10 0f b6 03 84 c0 74 09 f3 90 <0f> b6 03 84 c0 75 f7 b8 01 00 00 00 66 89 03 65 48 ff 05 83 a6 23 RSP: 0018:ffffb828c01ece08 EFLAGS: 00000002 RAX: 0000000000000001 RBX: ffff951846a9f6f8 RCX: 0000000000000300 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff951846a9f6f8 RBP: ffff95184684c438 R08: ffff951879f3f800 R09: ffff951841a94028 R10: ffff951879f3f800 R11: 0000000000000000 R12: 0000000000000031 R13: 0000000000000000 R14: ffff9518a562e000 R15: ffff9518c49e5800 FS: 0000000000000000(0000) GS:ffff952b9f980000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000001010fdac8 CR3: 000000018516a000 CR4: 0000000000f50ef0 PKRU: 55555554 Call Trace: <NMI> ? nmi_cpu_backtrace+0x99/0x110 ? nmi_cpu_backtrace_handler+0x11/0x20 ? nmi_handle+0x5e/0x150 ? default_do_nmi+0x40/0x100 ? exc_nmi+0x139/0x1c0 ? end_repeat_nmi+0xf/0x60 ? native_queued_spin_lock_slowpath+0x6e/0x2e0 ? native_queued_spin_lock_slowpath+0x6e/0x2e0 ? native_queued_spin_lock_slowpath+0x6e/0x2e0 </NMI> <IRQ> _raw_spin_lock_irqsave+0x3d/0x50 snd_pcm_period_elapsed+0x18/0x40 [snd_pcm df3bd3d8840cfa728bc0f17b93055a5a1595ec6d] process_rx_packets+0x245/0x5a0 [snd_firewire_lib 95578abd4cf50f7c2e87b0d8233b959be2154fc3] ? irqtime_account_irq+0x40/0xc0 irq_target_callback+0x16/0x20 [snd_firewire_lib 95578abd4cf50f7c2e87b0d8233b959be2154fc3] handle_it_packet+0x135/0x150 [firewire_ohci 83160820eab58a73fec0d1e78730dd51dd0ac98c] context_tasklet+0x140/0x160 [firewire_ohci 83160820eab58a73fec0d1e78730dd51dd0ac98c] tasklet_action_common.isra.0+0x146/0x240 __do_softirq+0xc9/0x2c8 __irq_exit_rcu+0xa3/0xc0 common_interrupt+0x86/0xa0 </IRQ> <TASK> asm_common_interrupt+0x26/0x40 RIP: 0010:cpuidle_enter_state+0xcc/0x440 Code: 2a 39 36 ff e8 05 f1 ff ff 8b 53 04 49 89 c5 0f 1f 44 00 00 31 ff e8 83 38 35 ff 45 84 ff 0f 85 56 02 00 00 fb 0f 1f 44 00 00 <45> 85 f6 0f 88 85 01 00 00 49 63 d6 48 8d 04 52 48 8d 04 82 49 8d RSP: 0018:ffffb828c00ffe90 EFLAGS: 00000246 RAX: ffff952b9f9b4800 RBX: ffff952b9f9be208 RCX: 000000000000001f RDX: 0000000000000006 RSI: 0000000022b8e38e RDI: 0000000000000000 RBP: 0000000000000001 R08: 0000000000000000 R09: 00000000000001c8 R10: 0000000000000018 R11: ffff952b9f9b31e4 R12: ffffffff83f49780 R13: 0000006b6114102b R14: 0000000000000001 R15: 0000000000000000 cpuidle_enter+0x2d/0x40 do_idle+0x1d8/0x230 cpu_startup_entry+0x2a/0x30 start_secondary+0x11e/0x140 secondary_startup_64_no_verify+0x184/0x18b </TASK> Sending NMI from CPU 2 to CPUs 13: NMI backtrace for cpu 13 CPU: 13 PID: 1993 Comm: reaper/audio Not tainted 6.8.0-rc5-1-mainline #8 c2061649224b2c533bd915b824b700586979f2da Hardware name: Micro-Star International Co., Ltd. MS-7D25/PRO Z690-A DDR4(MS-7D25), BIOS Dasharo (coreboot+UEFI) v1.1.3 01/17/2024 RIP: 0010:tasklet_unlock_spin_wait+0xd/0x20 Code: c0 c3 cc cc cc cc 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 eb 02 f3 90 <48> 8b 47 08 a8 02 75 f6 c3 cc cc cc cc 66 0f 1f 44 00 00 90 90 90 RSP: 0018:ffffb828c1cdbd08 EFLAGS: 00000002 RAX: 0000000000000002 RBX: ffff951841aba028 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff951841a2aa70 RDI: ffff951841aba0a8 RBP: ffffb828c1cdbea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000075800 R14: ffff951846a9f600 R15: 0000000000000000 FS: 00007f7f394006c0(0000) GS:ffff952b9fb40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc65c2a0000 CR3: 000000018516a000 CR4: 0000000000f50ef0 PKRU: 55555554 Call Trace: <NMI> ? nmi_cpu_backtrace+0x99/0x110 ? nmi_cpu_backtrace_handler+0x11/0x20 ? nmi_handle+0x5e/0x150 ? default_do_nmi+0x40/0x100 ? exc_nmi+0x139/0x1c0 ? end_repeat_nmi+0xf/0x60 ? tasklet_unlock_spin_wait+0xd/0x20 ? tasklet_unlock_spin_wait+0xd/0x20 ? tasklet_unlock_spin_wait+0xd/0x20 </NMI> <TASK> ohci_flush_iso_completions+0x1d/0x100 [firewire_ohci 83160820eab58a73fec0d1e78730dd51dd0ac98c] amdtp_domain_stream_pcm_pointer+0x41/0x50 [snd_firewire_lib 95578abd4cf50f7c2e87b0d8233b959be2154fc3] snd_pcm_update_hw_ptr0+0x6c/0x430 [snd_pcm df3bd3d8840cfa728bc0f17b93055a5a1595ec6d] ? sched_clock_cpu+0xf/0x190 ? __smp_call_single_queue+0xad/0x120 snd_pcm_delay+0x33/0x140 [snd_pcm df3bd3d8840cfa728bc0f17b93055a5a1595ec6d] snd_pcm_common_ioctl+0x922/0x12b0 [snd_pcm df3bd3d8840cfa728bc0f17b93055a5a1595ec6d] ? wake_up_q+0x4e/0x90 ? futex_wake+0x159/0x190 snd_pcm_ioctl+0x2e/0x50 [snd_pcm df3bd3d8840cfa728bc0f17b93055a5a1595ec6d] __x64_sys_ioctl+0x94/0xd0 do_syscall_64+0x86/0x170 ? do_syscall_64+0x96/0x170 ? do_syscall_64+0x96/0x170 ? do_syscall_64+0x96/0x170 ? do_syscall_64+0x96/0x170 ? __irq_exit_rcu+0x4b/0xc0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 RIP: 0033:0x7f7f47cfd4ff Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff ff 77 18 48 8b 44 24 18 64 48 2b 04 25 28 00 00 RSP: 002b:00007f7f393ffd50 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000003cfc060 RCX: 00007f7f47cfd4ff RDX: 00007f7f393ffdf0 RSI: 0000000080084121 RDI: 000000000000000a RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000004 R10: 00007f7f393ffb20 R11: 0000000000000246 R12: 0000000000005000 R13: 0000000003272a80 R14: 0000000000000050 R15: 00000000032706c0 </TASK> INFO: task khugepaged:124 blocked for more than 122 seconds. Not tainted 6.8.0-rc5-1-mainline #8 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:khugepaged state:D stack:0 pid:124 tgid:124 ppid:2 flags:0x00004000 Call Trace: <TASK> __schedule+0x3e6/0x1520 ? place_entity+0x1b/0xf0 schedule+0x32/0xd0 schedule_timeout+0x151/0x160 wait_for_completion+0x8a/0x160 __flush_work.isra.0+0x173/0x280 ? __pfx_wq_barrier_func+0x10/0x10 __lru_add_drain_all+0x14c/0x200 khugepaged+0x72/0x950 ? __pfx_autoremove_wake_function+0x10/0x10 ? __pfx_khugepaged+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK>

1 0

ASoC: rockchip_i2s_tdm calibration clocking problem
by Pavel Hofman 04 Mar '24

04 Mar '24

Hi, I am hitting a clock issue with rockchip_i2s_tdm.c + simple-audio-card (+ RK3308). At boot the mclk clk_i2s0_8ch_tx is (somehow) initialized to some (unimportant?) value 50176000 Hz. Note that this frequency is not multiple of either 48kHz or 44.1kHz. Method asoc_simple_parse_clk() reads this value and sets it to simple_dai->sysclk. Subsequently at asoc_simple_dai_init this "random" initial value is stored to i2s_tdm->mclk_tx_freq: 17.839330] rockchip_i2s_tdm_set_sysclk+0x50/0xbc [snd_soc_rockchip_i2s_tdm] [ 17.839367] snd_soc_dai_set_sysclk+0x38/0xb8 [snd_soc_core] [ 17.839596] asoc_simple_init_dai+0x94/0xc0 [snd_soc_simple_card_utils] [ 17.839640] asoc_simple_dai_init+0x130/0x230 [snd_soc_simple_card_utils] [ 17.839672] snd_soc_link_init+0x28/0x90 [snd_soc_core] [ 17.839843] snd_soc_bind_card+0x60c/0xbb4 [snd_soc_core] When starting playback, called by rockchip_i2s_tdm_hw_params(), rockchip_i2s_tdm_calibrate_mclk() correctly switches parent of mclk_parent to correct root pll clock mclk_root0/1 for the given samplerate and correctly configures mclk_parent frequency. https://github.com/torvalds/linux/blob/master/sound/soc/rockchip/rockchip_i… But right after that, the next line of rockchip_i2s_tdm_hw_params() calls rockchip_i2s_tdm_set_mclk() https://github.com/torvalds/linux/blob/master/sound/soc/rockchip/rockchip_i… This method calls clk_set_rate(i2s_tdm->mclk_tx, i2s_tdm->mclk_tx_freq), which resets the clock and its parental chain to the original incorrect value stored in i2s_tdm->mclk_tx_freq from the dai initialization. https://github.com/torvalds/linux/blob/master/sound/soc/rockchip/rockchip_i… As a result, no matter what sample rate is being played, the i2s mclk clock always ends up configured incorrectly. DTS I2S sets all clocks, therefore the clk calibration in rockchip_i2s_tdm.c should be (and is) used: i2s_8ch_0: i2s@ff300000 { compatible = "rockchip,rk3308-i2s-tdm"; reg = <0x0 0xff300000 0x0 0x1000>; interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_I2S0_8CH_TX>, <&cru SCLK_I2S0_8CH_RX>, <&cru HCLK_I2S0_8CH>, <&cru SCLK_I2S0_8CH_TX_SRC>, <&cru SCLK_I2S0_8CH_RX_SRC>, <&cru PLL_VPLL0>, <&cru PLL_VPLL1>; clock-names = "mclk_tx", "mclk_rx", "hclk", "mclk_tx_src", "mclk_rx_src", "mclk_root0", "mclk_root1"; ......... It seems to me that the calibration code should also rewrite the initially incorrect i2s_tdm->mclk_tx_freq and i2s_tdm->mclk_rx_freq with correct values corresponding to the momentary hw_params rate, or maybe rockchip_i2s_tdm_set_mclk() should not be called if rockchip_i2s_tdm_calibrate_mclk() is called a line above (i.e. putting the call to rockchip_i2s_tdm_set_mclk() into "else" branch). Thank you very much for help. With regards, Pavel.

2 1

[PATCH 5.10/5.15/6.1 0/1] soundwire: stream: use consistent pattern for freeing buffers
by Daniil Dulov 04 Mar '24

04 Mar '24

Svacer reports NULL-pointer dereference and double free issues in do_bank_switch() in case sdw_ml_sync_bank_switch() returns an error not on the first iteration of the list_for_each_entry() loop. These problems are present in 5.10, 5.15 and 6.1 stable releases. These problems have been fixed by the following upstream patch that can be cleanly applied to 5.10, 5.15 and 6.1 branches.

1 1

[PATCH] [alsa-lib][PATCH] conf: USB-Audio: Add Corsair HS60 Pro to the IEC958 blacklist
by David Senoner 04 Mar '24

04 Mar '24

This device is just an external USB soundcard with a female 3.5mm jack for a headset, no S/PDIF | IEC958 connector. Add it to the blacklist to prevent it being opened. Signed-off-by: David Senoner <seda18(a)rolmail.net> --- src/conf/cards/USB-Audio.conf | 1 + 1 file changed, 1 insertion(+) diff --git a/src/conf/cards/USB-Audio.conf b/src/conf/cards/USB-Audio.conf index 80631b2e..08346a1b 100644 --- a/src/conf/cards/USB-Audio.conf +++ b/src/conf/cards/USB-Audio.conf @@ -53,6 +53,7 @@ USB-Audio.pcm.iec958_device { "Blue Snowball" 999 "C-Media USB Headphone Set" 999 "Cmedia Audio" 999 + "Corsair HS60 PRO Surround USB S" 999 "DELL PROFESSIONAL SOUND BAR AE5" 999 "HP Digital Stereo Headset" 999 "GN 9330" 999 -- 2.43.2

3 2

[PATCH RESEND] conf: USB-Audio: Add more Scarlett devices to the IEC958 blacklist
by Geoffrey D. Bennett 04 Mar '24

04 Mar '24

The Scarlett Solo and 2i2 don't have S/PDIF outputs. Signed-off-by: Geoffrey D. Bennett <g(a)b4.vu> --- src/conf/cards/USB-Audio.conf | 3 +++ 1 file changed, 3 insertions(+) diff --git a/src/conf/cards/USB-Audio.conf b/src/conf/cards/USB-Audio.conf index 80631b2e..05384a32 100644 --- a/src/conf/cards/USB-Audio.conf +++ b/src/conf/cards/USB-Audio.conf @@ -66,8 +66,11 @@ USB-Audio.pcm.iec958_device { "Plantronics USB Headset" 999 "Plantronics Wireless Audio" 999 "SB WoW Headset" 999 + "Scarlett 2i2 4th Gen" 999 "Scarlett 2i2 USB" 999 "Scarlett 2i4 USB" 999 + "Scarlett Solo 4th Gen" 999 + "Scarlett Solo USB" 999 "Sennheiser USB headset" 999 "SWTOR Gaming Headset by Razer" 999 "ThinkStation P620 Main" 999 -- 2.43.0

2 1

[PATCH v3 0/5] ALSA/ASoC: Conditionally skip i915 init and cleanups
by Cezary Rojewski 04 Mar '24

04 Mar '24

A small set of changes to improve initialization of the audio stack on HDAudio devices and pair of cleanups. As the first change is the most important one here, following is the technical background for it: Commit 78f613ba1efb ("drm/i915: finish removal of CNL") and its friends removed support for i915 for all CNL-based platforms. HDAudio library, however, still treats such platforms as valid candidates for i915 binding. Update query mechanism to reflect changes made in drm tree. At the same time, i915 support for LKF-based platforms has not been provided so remove them from valid binding candidates. The snd_soc_hda change is a follow up for the above and the cleanup patches do not bring any functional changes. Changes in v3: - snd_soc_hda_codec now returns -ENODEV on attach() if i915 is not present - denylist now const - added new patch for the avs-driver to address -ENODEV during probe_codec() - note: retained reviewed-by for patch 1/4 as changes are minimal Changes in v2: - list of problematic VGA devices is now declared locally, no more touching drm stuff Cezary Rojewski (5): ALSA: hda: Skip i915 initialization on CNL/LKF-based platforms ASoC: codecs: hda: Skip HDMI/DP registration if i915 is missing ASoC: Intel: avs: Ignore codecs with no suppoting driver ASoC: codecs: hda: Cleanup error messages ALSA: hda: Reuse for_each_pcm_streams() sound/hda/hdac_i915.c | 32 +++++++++++++++++++++++++++++--- sound/pci/hda/hda_codec.c | 2 +- sound/soc/codecs/hda.c | 15 ++++++++++----- sound/soc/intel/avs/core.c | 9 +++++---- 4 files changed, 45 insertions(+), 13 deletions(-) -- 2.25.1

3 9

[PATCH v1 0/3] ALSA: hda: cs35l41: Add support for a couple of Lenovo and Asus Laptops
by Stefan Binding 04 Mar '24

04 Mar '24

Add support for a couple of Lenovo Thinkbook 16P laptops using CS35L41 HDA. Also fix a _DSD BIOS error for the ASUS UM5302LA laptop. Stefan Binding (3): ALSA: hda: cs35l41: Support Lenovo Thinkbook 16P ALSA: hda/realtek: Add quirks for Lenovo Thinkbook 16P laptops ALSA: hda: cs35l41: Overwrite CS35L41 configuration for ASUS UM5302LA sound/pci/hda/cs35l41_hda_property.c | 6 ++++++ sound/pci/hda/patch_realtek.c | 2 ++ 2 files changed, 8 insertions(+) -- 2.34.1

2 4

Enable Headset Mic for Acer NB platform
by Kailang 04 Mar '24

04 Mar '24

Hi Takashi, This patch will enable headset Mic for Acer NB platform. Many Thanks. BR, Kailang

2 3

Scarlett Solo USB profiles missing or broken in 1.2.11
by GitHub issues - edited 03 Mar '24

03 Mar '24

alsa-project/alsa-ucm-conf issue #398 was edited from Slabity: Prior to version 1.2.10, my Scarlett Solo USB profiles looked like the following, where I could select profiles that explicitly enabled or disabled either the Inputs or Outputs: ![goodaudiooutput](https://github.com/alsa-project/alsa-ucm-conf/assets/3788421/b1bbc857-82b6-4fa5-b478-0c00c26b281c) As of 1.2.11, these profiles have disappeared and have left only a couple of profiles that do not provide the same functionality: ![badaudiooutputs](https://github.com/alsa-project/alsa-ucm-conf/assets/3788421/6c321638-3eb1-45ef-94a5-734c16477886) Other devices like my GPU's HDMI/DP Audio and motherboard's "Starship/Matisse HD Audio Controller" continue to expose the wider variety of profiles. It is only this device that seems to have the issue. I originally reported this on #346 as I thought it was related, but was told it might be a different issue. What makes me worried is the mention that this is "expected" now despite it breaking my audio setup. I can no longer select the "Digital Stereo (IEC958) Input" to exclusively enable the Input Device *without* enabling the Output Device. Here's some more information about the device: ``` $ lsusb | grep Focusrite Bus 007 Device 003: ID 1235:801c Focusrite-Novation Scarlett Solo USB $ alsaucm listcards 0: hw:2 Focusrite Scarlett Solo USB at usb-0000:10:00.3-3, high speed $ alsaucm -c hw:2 dump text Verb.HiFi { Comment Default Device.Line1 { Comment "Headphones / Line 1-2" Values { CaptureCTL "_ucm0001.hw:USB" PlaybackCTL "_ucm0001.hw:USB" PlaybackPCM "_ucm0001.hw:USB" PlaybackPriority 200 } } Device.Mic1 { Comment "Input 1 Mic" Values { CaptureCTL "_ucm0001.hw:USB" CaptureChannels 1 CapturePCM "_ucm0001.scarlett2i_mono_in:USB,0,0" CapturePriority 200 PlaybackCTL "_ucm0001.hw:USB" } } Device.Mic2 { Comment "Input 2 Inst/Line" Values { CaptureCTL "_ucm0001.hw:USB" CaptureChannels 1 CapturePCM "_ucm0001.scarlett2i_mono_in:USB,0,1" CapturePriority 100 PlaybackCTL "_ucm0001.hw:USB" } } } Verb.Direct { Comment "Direct Scarlett Solo USB" Device.Direct { Comment "Direct Scarlett Solo USB" Values { CaptureCTL "_ucm0001.hw:USB" CaptureChannels 2 CapturePCM "_ucm0001.hw:USB" CapturePriority 1000 PlaybackCTL "_ucm0001.hw:USB" PlaybackChannels 2 PlaybackPCM "_ucm0001.hw:USB" PlaybackPriority 1000 } } } ``` Some OS info it it helps: Linux distribution: NixOS on nixpkgs-unstable Kernel: 6.7.7 ALSA version: Advanced Linux Sound Architecture Driver Version k6.7.7 Pulseaudio version: 15.0.0 Pipewire version: 1.0.3 Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/398 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Scarlett Solo USB profiles missing or broken in 1.2.11
by GitHub issues - edited 03 Mar '24

03 Mar '24

alsa-project/alsa-ucm-conf issue #398 was edited from Slabity: Prior to version 1.2.10, my Scarlett Solo USB profiles looked like the following, where I could select profiles that explicitly enabled or disabled either the Inputs or Outputs: ![goodaudiooutput](https://github.com/alsa-project/alsa-ucm-conf/assets/3788421/b1bbc857-82b6-4fa5-b478-0c00c26b281c) As of 1.2.11, these profiles have disappeared and have left only a couple of profiles that do not provide the same functionality: ![badaudiooutputs](https://github.com/alsa-project/alsa-ucm-conf/assets/3788421/6c321638-3eb1-45ef-94a5-734c16477886) Other devices like my GPU's HDMI/DP Audio and motherboard's "Starship/Matisse HD Audio Controller" continue to expose the wider variety of profiles. It is only this device that seems to have the issue. I originally reported this on #346 as I thought it was related, but was told it might be a different issue. What makes me worried is the mention that this is "expected" now despite it breaking my audio setup. I can no longer select the "Digital Stereo (IEC958) Input" to exclusively enable the Input Device *without* enabling the Output Device. Here's some more information about the device: ``` $ lsusb | grep Focusrite Bus 007 Device 003: ID 1235:801c Focusrite-Novation Scarlett Solo USB $ alsaucm listcards 0: hw:2 Focusrite Scarlett Solo USB at usb-0000:10:00.3-3, high speed $ alsaucm -c hw:2 dump text Verb.HiFi { Comment Default Device.Line1 { Comment "Headphones / Line 1-2" Values { CaptureCTL "_ucm0001.hw:USB" PlaybackCTL "_ucm0001.hw:USB" PlaybackPCM "_ucm0001.hw:USB" PlaybackPriority 200 } } Device.Mic1 { Comment "Input 1 Mic" Values { CaptureCTL "_ucm0001.hw:USB" CaptureChannels 1 CapturePCM "_ucm0001.scarlett2i_mono_in:USB,0,0" CapturePriority 200 PlaybackCTL "_ucm0001.hw:USB" } } Device.Mic2 { Comment "Input 2 Inst/Line" Values { CaptureCTL "_ucm0001.hw:USB" CaptureChannels 1 CapturePCM "_ucm0001.scarlett2i_mono_in:USB,0,1" CapturePriority 100 PlaybackCTL "_ucm0001.hw:USB" } } } Verb.Direct { Comment "Direct Scarlett Solo USB" Device.Direct { Comment "Direct Scarlett Solo USB" Values { CaptureCTL "_ucm0001.hw:USB" CaptureChannels 2 CapturePCM "_ucm0001.hw:USB" CapturePriority 1000 PlaybackCTL "_ucm0001.hw:USB" PlaybackChannels 2 PlaybackPCM "_ucm0001.hw:USB" PlaybackPriority 1000 } } } ``` Some OS info it it helps: Linux distribution: NixOS Kernel: 6.7.7 ALSA version: Advanced Linux Sound Architecture Driver Version k6.7.7 Pulseaudio version: 15.0.0 Pipewire version: 1.0.3 Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/398 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Scarlett Solo USB profiles missing or broken in 1.2.11
by GitHub issues - edited 03 Mar '24

03 Mar '24

alsa-project/alsa-ucm-conf issue #398 was edited from Slabity: Prior to version 1.2.10, my Scarlett Solo USB profiles looked like the following, where I could select profiles that explicitly enabled or disabled either the Inputs or Outputs: ![goodaudiooutput](https://github.com/alsa-project/alsa-ucm-conf/assets/3788421/b1bbc857-82b6-4fa5-b478-0c00c26b281c) As of 1.2.11, these profiles have disappeared and have left only a couple of profiles that do not provide the same functionality: ![badaudiooutputs](https://github.com/alsa-project/alsa-ucm-conf/assets/3788421/6c321638-3eb1-45ef-94a5-734c16477886) Other devices like my GPU's HDMI/DP Audio and motherboard's "Starship/Matisse HD Audio Controller" continue to expose the wider variety of profiles. It is only this device that seems to have the issue. I originally reported this on #346 as I thought it was related, but was told it might be a different issue. What makes me worried is the mention that this is "expected" now despite it breaking my audio setup. I can no longer select the "Digital Stereo (IEC958) Input" to exclusively enable the Input Device *without* enabling the Output Device. Here's some more information about the device: ``` $ lsusb | grep Focusrite Bus 007 Device 003: ID 1235:801c Focusrite-Novation Scarlett Solo USB $ alsaucm listcards 0: hw:2 Focusrite Scarlett Solo USB at usb-0000:10:00.3-3, high speed $ alsaucm -c hw:2 dump text Verb.HiFi { Comment Default Device.Line1 { Comment "Headphones / Line 1-2" Values { CaptureCTL "_ucm0001.hw:USB" PlaybackCTL "_ucm0001.hw:USB" PlaybackPCM "_ucm0001.hw:USB" PlaybackPriority 200 } } Device.Mic1 { Comment "Input 1 Mic" Values { CaptureCTL "_ucm0001.hw:USB" CaptureChannels 1 CapturePCM "_ucm0001.scarlett2i_mono_in:USB,0,0" CapturePriority 200 PlaybackCTL "_ucm0001.hw:USB" } } Device.Mic2 { Comment "Input 2 Inst/Line" Values { CaptureCTL "_ucm0001.hw:USB" CaptureChannels 1 CapturePCM "_ucm0001.scarlett2i_mono_in:USB,0,1" CapturePriority 100 PlaybackCTL "_ucm0001.hw:USB" } } } Verb.Direct { Comment "Direct Scarlett Solo USB" Device.Direct { Comment "Direct Scarlett Solo USB" Values { CaptureCTL "_ucm0001.hw:USB" CaptureChannels 2 CapturePCM "_ucm0001.hw:USB" CapturePriority 1000 PlaybackCTL "_ucm0001.hw:USB" PlaybackChannels 2 PlaybackPCM "_ucm0001.hw:USB" PlaybackPriority 1000 } } } ``` Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/398 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Scarlett Solo USB profiles missing or broken in 1.2.11
by GitHub issues - opened 03 Mar '24

03 Mar '24

alsa-project/alsa-ucm-conf issue #398 was opened from Slabity: Prior to version 1.2.10, my Scarlett Solo USB profiles looked like the following, where I could select profiles that explicitly enabled or disabled either the Inputs or Outputs: ![goodaudiooutput](https://github.com/alsa-project/alsa-ucm-conf/assets/3788421/b1bbc857-82b6-4fa5-b478-0c00c26b281c) As of 1.2.11, these profiles have disappeared and have left only a couple of profiles that do not provide the same functionality: ![badaudiooutputs](https://github.com/alsa-project/alsa-ucm-conf/assets/3788421/6c321638-3eb1-45ef-94a5-734c16477886) Other devices like my GPU's HDMI/DP Audio and motherboard's "Starship/Matisse HD Audio Controller" continue to expose the wider variety of profiles. It is only this device that seems to have the issue. I originally reported this on #346 as I thought it was related, but was told it might be a different issue. What makes me worried is the mention that this is "expected" now despite it breaking my audio setup. I can no longer select the "Digital Stereo (IEC958) Input" to exclusively enable the Input Device *without* enabling the Output Device. Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/398 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH] soundwire: Use snd_soc_substream_to_rtd() to obtain rtd
by Cezary Rojewski 03 Mar '24

03 Mar '24

Utilize the helper function instead of casting from ->private_data directly. Signed-off-by: Cezary Rojewski <cezary.rojewski(a)intel.com> --- drivers/soundwire/stream.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c index f9c0adc0738d..4e9e7d2a942d 100644 --- a/drivers/soundwire/stream.c +++ b/drivers/soundwire/stream.c @@ -1718,7 +1718,7 @@ EXPORT_SYMBOL(sdw_deprepare_stream); static int set_stream(struct snd_pcm_substream *substream, struct sdw_stream_runtime *sdw_stream) { - struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream); struct snd_soc_dai *dai; int ret = 0; int i; @@ -1771,7 +1771,7 @@ EXPORT_SYMBOL(sdw_alloc_stream); int sdw_startup_stream(void *sdw_substream) { struct snd_pcm_substream *substream = sdw_substream; - struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream); struct sdw_stream_runtime *sdw_stream; char *name; int ret; @@ -1815,7 +1815,7 @@ EXPORT_SYMBOL(sdw_startup_stream); void sdw_shutdown_stream(void *sdw_substream) { struct snd_pcm_substream *substream = sdw_substream; - struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream); struct sdw_stream_runtime *sdw_stream; struct snd_soc_dai *dai; -- 2.25.1

2 1

[PATCH] soundwire: constify the struct device_type usage
by Ricardo B. Marliere 03 Mar '24

03 Mar '24

Since commit aed65af1cc2f ("drivers: make device_type const"), the driver core can properly handle constant struct device_type. Move the sdw_master_type and sdw_slave_type variables to be constant structures as well, placing it into read-only memory which can not be modified at runtime. Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Ricardo B. Marliere <ricardo(a)marliere.net> --- drivers/soundwire/master.c | 2 +- drivers/soundwire/slave.c | 2 +- include/linux/soundwire/sdw_type.h | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/soundwire/master.c b/drivers/soundwire/master.c index 51abedbbaa66..b2c64512739d 100644 --- a/drivers/soundwire/master.c +++ b/drivers/soundwire/master.c @@ -112,7 +112,7 @@ static const struct dev_pm_ops master_dev_pm = { pm_generic_runtime_resume, NULL) }; -struct device_type sdw_master_type = { +const struct device_type sdw_master_type = { .name = "soundwire_master", .release = sdw_master_device_release, .pm = &master_dev_pm, diff --git a/drivers/soundwire/slave.c b/drivers/soundwire/slave.c index 060c2982e26b..9963b92eb505 100644 --- a/drivers/soundwire/slave.c +++ b/drivers/soundwire/slave.c @@ -16,7 +16,7 @@ static void sdw_slave_release(struct device *dev) kfree(slave); } -struct device_type sdw_slave_type = { +const struct device_type sdw_slave_type = { .name = "sdw_slave", .release = sdw_slave_release, .uevent = sdw_slave_uevent, diff --git a/include/linux/soundwire/sdw_type.h b/include/linux/soundwire/sdw_type.h index b445f7200f06..693320b4f5c2 100644 --- a/include/linux/soundwire/sdw_type.h +++ b/include/linux/soundwire/sdw_type.h @@ -5,8 +5,8 @@ #define __SOUNDWIRE_TYPES_H extern const struct bus_type sdw_bus_type; -extern struct device_type sdw_slave_type; -extern struct device_type sdw_master_type; +extern const struct device_type sdw_slave_type; +extern const struct device_type sdw_master_type; static inline int is_sdw_slave(const struct device *dev) { --- base-commit: 81a7d0c4d059cb5c122110acbeec7bedfb91a741 change-id: 20240219-device_cleanup-soundwire-c037fffa2746 Best regards, -- Ricardo B. Marliere <ricardo(a)marliere.net>

2 1

[PATCH] soundwire: Use snd_soc_substream_to_rtd() to obtain rtd
by Amadeusz Sławiński 03 Mar '24

03 Mar '24

From: Cezary Rojewski <cezary.rojewski(a)intel.com> Utilize the helper function instead of casting from ->private_data directly. Signed-off-by: Cezary Rojewski <cezary.rojewski(a)intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski(a)linux.intel.com> --- drivers/soundwire/stream.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c index 69719b335bcb..652aae4e221d 100644 --- a/drivers/soundwire/stream.c +++ b/drivers/soundwire/stream.c @@ -1717,7 +1717,7 @@ EXPORT_SYMBOL(sdw_deprepare_stream); static int set_stream(struct snd_pcm_substream *substream, struct sdw_stream_runtime *sdw_stream) { - struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream); struct snd_soc_dai *dai; int ret = 0; int i; @@ -1770,7 +1770,7 @@ EXPORT_SYMBOL(sdw_alloc_stream); int sdw_startup_stream(void *sdw_substream) { struct snd_pcm_substream *substream = sdw_substream; - struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream); struct sdw_stream_runtime *sdw_stream; char *name; int ret; @@ -1814,7 +1814,7 @@ EXPORT_SYMBOL(sdw_startup_stream); void sdw_shutdown_stream(void *sdw_substream) { struct snd_pcm_substream *substream = sdw_substream; - struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream); struct sdw_stream_runtime *sdw_stream; struct snd_soc_dai *dai; -- 2.34.1

2 2

Internal mic does not work on IdeaPad 3 Chromebook
by GitHub issues - opened 03 Mar '24

03 Mar '24

alsa-project/alsa-ucm-conf issue #397 was opened from abhi-deshpande: Device - IdeaPad 3 Chromebook (Octopus Lick) OS - Fedora 39 Card - sof-glkda7219max I recently converted my Chromebook to Chultrabook and installed latest Fedora on it. It seems that most of the audio stuff works, but the internal DMIC doesn't work. I read some previous issues and commits and found that this is due to the fact that the DMIC needs channel split as CRAS does. This was being implemented in #154 I guess. I am currently on lastest alsa-lib and alsa-ucm-conf. What could be missing ? Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/397 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH V3 00/13] soundwire/SOF: add SoundWire Interface support for AMD SOF stack
by Vijendar Mukunda 02 Mar '24

02 Mar '24

This patch series is to redesign existing platform device creation logic for SoundWire managers and Implement generic functions for SoundWire manager probe, start and exit sequence which are common for both Legacy (NO DSP enabled) and SOF stack, and add SoundWire Interface support for AMD SOF stack (ACP 6.3 based platform). Below patch series is reviewed in https://github.com/thesofproject/linux/pull/4699 Changes since V1: - add new commit to update license for amd soundwire manager driver files. - wrap the commit message with in 75 characters. - add amd tag in commit title for soundwire patches Changes since V2: - drop "drivers" tag from commit title for SoundWire patches. This patch series has dependencies. "drivers: soundwire: amd: refactor amd soundwire manager device node creation" patch has dependency on below patch. "ASoC/soundwire: implement generic api for scanning amd soundwire controller" Similarly SOF patches has dependency on Soundwire tree patches. This patch series has to be reviewed and merged in one go. Vijendar Mukunda (13): ASoC/soundwire: implement generic api for scanning amd soundwire controller soundwire: amd: update license soundwire: amd: refactor amd soundwire manager device node creation soundwire: amd: implement function to extract slave information soundwire: amd: refactor soundwire pads enable soundwire: amd: refactor register mask structure ASoC: SOF: amd: add code for invoking soundwire manager helper functions ASoC: SOF: amd: add interrupt handling for SoundWire manager devices ASoC: SOF: amd: Add Soundwire DAI configuration support for AMD platforms ASoC: SOF: amd: add machine select logic for soundwire based platforms ASoC: SOF: amd: update descriptor fields for acp6.3 based platform ASoC: SOF: amd: select soundwire dependency flag for acp6.3 based platform ASoC: SOF: amd: refactor acp driver pm ops drivers/soundwire/Makefile | 2 +- drivers/soundwire/amd_init.c | 235 +++++++++++++++++++++++++++++ drivers/soundwire/amd_init.h | 13 ++ drivers/soundwire/amd_manager.c | 45 ++---- drivers/soundwire/amd_manager.h | 14 +- include/linux/soundwire/sdw_amd.h | 81 ++++++++-- include/sound/sof/dai-amd.h | 7 + include/sound/sof/dai.h | 2 + include/uapi/sound/sof/tokens.h | 4 + sound/soc/amd/acp/Kconfig | 7 + sound/soc/amd/acp/Makefile | 2 + sound/soc/amd/acp/amd-sdw-acpi.c | 62 ++++++++ sound/soc/sof/amd/Kconfig | 18 +++ sound/soc/sof/amd/acp-common.c | 65 +++++++- sound/soc/sof/amd/acp-dsp-offset.h | 10 ++ sound/soc/sof/amd/acp.c | 202 ++++++++++++++++++++++++- sound/soc/sof/amd/acp.h | 26 +++- sound/soc/sof/amd/pci-acp63.c | 7 + sound/soc/sof/ipc3-pcm.c | 25 +++ sound/soc/sof/ipc3-topology.c | 40 +++++ sound/soc/sof/sof-audio.h | 1 + sound/soc/sof/topology.c | 5 + 22 files changed, 802 insertions(+), 71 deletions(-) create mode 100644 drivers/soundwire/amd_init.c create mode 100644 drivers/soundwire/amd_init.h create mode 100644 sound/soc/amd/acp/amd-sdw-acpi.c -- 2.34.1

3 15

[PATCH v4 00/39] Add support for sam9x7 SoC family
by Varshini Rajendran 01 Mar '24

01 Mar '24

This patch series adds support for the new SoC family - sam9x7. - The device tree, configs and drivers are added - Clock driver for sam9x7 is added - Support for basic peripherals is added - Target board SAM9X75 Curiosity is added Changes in v4: -------------- - Addressed all the review comments in the patches - Picked up all Acked-by and Reviewed-by tags - Dropped applied patches from the series - Added pwm node and related dt binding documentation - Added support for exporting some clocks to DT - Dropped USB related patches and changes. See NOTE. - All the specific changes are captured in the corresponding patches NOTE: Owing to the discussion here https://lore.kernel.org/linux-devicetree/CAL_JsqJ9PrX6fj-EbffeJce09MXs=B7t+… the USB related changes are dropped from this series in order to enable us to work on the mentioned issues before adding new compatibles as said. The issues/warnings will be addressed in subsequent patches. After which the USB related support for sam9x7 SoCs will be added. Hope this works out fine. Changes in v3: -------------- - Fixed the DT documentation errors pointed out in v2. - Dropped Acked-by tag in tcb DT doc patch as it had to be adapted according to sam9x7 correctly. - Picked by the previously missed tags. - Dropped this patch "dt-bindings: usb: generic-ehci: Document clock-names property" as the warning was not found while validating DT-schema for at91-sam9x75_curiosity.dtb. - Dropped redundant words in the commit message. - Fixed the CHECK_DTBS warnings validated against at91-sam9x75_curiosity.dtb. - Renamed dt nodes according to naming convention. - Dropped unwanted status property in dts. - Removed nodes that are not in use from the board dts. - Removed spi DT doc patch from the series as it was already applied and a fix patch was applied subsequently. Added a patch to remove the compatible to adapt sam9x7. - Added sam9x7 compatibles in usb dt documentation. Changes in v2: -------------- - Added sam9x7 specific compatibles in DT with fallbacks - Documented all the newly added DT compatible strings - Added device tree for the target board sam9x75 curiosity and documented the same in the DT bindings documentation - Removed the dt nodes that are not supported at the moment - Removed the configs added by previous version that are not supported at the moment - Fixed all the corrections in the commit message - Changed all the instances of copyright year to 2023 - Added sam9x7 flag in PIT64B configuration - Moved macro definitions to header file - Added another divider in mck characteristics in the pmc driver - Fixed the memory leak in the pmc driver - Dropped patches that are no longer needed - Picked up Acked-by and Reviewed-by tags Varshini Rajendran (39): dt-bindings: net: cdns,macb: add sam9x7 ethernet interface dt-bindings: atmel-sysreg: add sam9x7 dt-bindings: crypto: add sam9x7 in Atmel AES dt-bindings: crypto: add sam9x7 in Atmel SHA dt-bindings: crypto: add sam9x7 in Atmel TDES dt-bindings: i2c: at91: Add sam9x7 compatible string dt-bindings: atmel-ssc: add microchip,sam9x7-ssc dt-bindings: atmel-nand: add microchip,sam9x7-pmecc dt-bindings: pinctrl: at91: add sam9x7 dt-bindings: rng: atmel,at91-trng: add sam9x7 TRNG dt-bindings: rtt: at91rm9260: add sam9x7 compatible dt-bindings: serial: atmel,at91-usart: add compatible for sam9x7. ASoC: dt-bindings: atmel-classd: add sam9x7 compatible dt-bindings: pwm: at91: Add sam9x7 compatible strings list dt-bindings: watchdog: sama5d4-wdt: add compatible for sam9x7-wdt spi: dt-bindings: atmel,at91rm9200-spi: remove 9x60 compatible from list ASoC: dt-bindings: microchip: add sam9x7 ARM: at91: pm: add support for sam9x7 SoC family ARM: at91: pm: add sam9x7 SoC init config ARM: at91: add support in SoC driver for new sam9x7 dt-bindings: clk: at91: add sam9x7 dt-bindings: clk: at91: add sam9x7 clock controller clk: at91: clk-sam9x60-pll: re-factor to support individual core freq outputs clk: at91: sam9x7: add support for HW PLL freq dividers clk: at91: sama7g5: move mux table macros to header file dt-bindings: clock: at91: Allow PLLs to be exported and referenced in DT clk: at91: sam9x7: add sam9x7 pmc driver dt-bindings: irqchip/atmel-aic5: Add support for sam9x7 aic irqchip/atmel-aic5: Add support to get nirqs from DT for sam9x60 & sam9x7 power: reset: at91-poweroff: lookup for proper pmc dt node for sam9x7 power: reset: at91-reset: add reset support for sam9x7 SoC power: reset: at91-reset: add sdhwc support for sam9x7 SoC dt-bindings: reset: atmel,at91sam9260-reset: add sam9x7 dt-bindings: power: reset: atmel,sama5d2-shdwc: add sam9x7 ARM: at91: Kconfig: add config flag for SAM9X7 SoC ARM: configs: at91: enable config flags for sam9x7 SoC family ARM: dts: at91: sam9x7: add device tree for SoC dt-bindings: arm: add sam9x75 curiosity board ARM: dts: at91: sam9x75_curiosity: add sam9x75 curiosity board .../devicetree/bindings/arm/atmel-at91.yaml | 6 + .../devicetree/bindings/arm/atmel-sysregs.txt | 7 +- .../bindings/clock/atmel,at91rm9200-pmc.yaml | 2 + .../bindings/clock/atmel,at91sam9x5-sckc.yaml | 4 +- .../crypto/atmel,at91sam9g46-aes.yaml | 6 +- .../crypto/atmel,at91sam9g46-sha.yaml | 6 +- .../crypto/atmel,at91sam9g46-tdes.yaml | 6 +- .../bindings/i2c/atmel,at91sam-i2c.yaml | 4 +- .../interrupt-controller/atmel,aic.txt | 2 +- .../devicetree/bindings/misc/atmel-ssc.txt | 1 + .../devicetree/bindings/mtd/atmel-nand.txt | 1 + .../devicetree/bindings/net/cdns,macb.yaml | 5 + .../bindings/pinctrl/atmel,at91-pinctrl.txt | 2 + .../power/reset/atmel,sama5d2-shdwc.yaml | 3 + .../bindings/pwm/atmel,at91sam-pwm.yaml | 3 + .../reset/atmel,at91sam9260-reset.yaml | 4 + .../bindings/rng/atmel,at91-trng.yaml | 4 + .../bindings/rtc/atmel,at91sam9260-rtt.yaml | 4 +- .../bindings/serial/atmel,at91-usart.yaml | 12 +- .../bindings/sound/atmel,sama5d2-classd.yaml | 7 +- .../sound/microchip,sama7g5-i2smcc.yaml | 11 +- .../bindings/spi/atmel,at91rm9200-spi.yaml | 1 - .../bindings/watchdog/atmel,sama5d4-wdt.yaml | 12 +- arch/arm/boot/dts/microchip/Makefile | 3 + .../dts/microchip/at91-sam9x75_curiosity.dts | 309 +++++ arch/arm/boot/dts/microchip/sam9x60.dtsi | 1 + arch/arm/boot/dts/microchip/sam9x7.dtsi | 1214 +++++++++++++++++ arch/arm/configs/at91_dt_defconfig | 1 + arch/arm/mach-at91/Kconfig | 23 +- arch/arm/mach-at91/Makefile | 1 + arch/arm/mach-at91/generic.h | 2 + arch/arm/mach-at91/pm.c | 35 + arch/arm/mach-at91/sam9x7.c | 34 + drivers/clk/at91/Makefile | 1 + drivers/clk/at91/clk-sam9x60-pll.c | 50 +- drivers/clk/at91/pmc.h | 18 + drivers/clk/at91/sam9x60.c | 7 + drivers/clk/at91/sam9x7.c | 946 +++++++++++++ drivers/clk/at91/sama7g5.c | 42 +- drivers/irqchip/irq-atmel-aic5.c | 12 +- drivers/power/reset/Kconfig | 4 +- drivers/power/reset/at91-sama5d2_shdwc.c | 1 + drivers/soc/atmel/soc.c | 23 + drivers/soc/atmel/soc.h | 9 + include/dt-bindings/clock/at91.h | 4 + 45 files changed, 2788 insertions(+), 65 deletions(-) create mode 100644 arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts create mode 100644 arch/arm/boot/dts/microchip/sam9x7.dtsi create mode 100644 arch/arm/mach-at91/sam9x7.c create mode 100644 drivers/clk/at91/sam9x7.c -- 2.25.1

6 8

[PATCH v1] ALSA: hda: optimize the probe codec process
by songxiebing 01 Mar '24

01 Mar '24

From: songxiebing <songxiebing(a)kylinos.cn> In azx_probe_codecs function，when bus->codec_mask is becomes to 0(no codecs), execute azx_init_chip, bus->codec_mask will be initialized to a value again， this causes snd_hda_codec_new function to run, the process is as follows: -->snd_hda_codec_new -->snd_hda_codec_device_init -->snd_hdac_device_init---snd_hdac_read_parm(...AC_PAR_VENDOR_ID) 2s ---snd_hdac_read_parm(...AC_PAR_VENDOR_ID) 2s ---snd_hdac_read_parm(...AC_PAR_SUBSYSTEM_ID) 2s ---snd_hdac_read_parm(...AC_PAR_REV_ID) 2s ---snd_hdac_read_parm(...AC_PAR_NODE_COUNT) 2s when no codecs, read communication is error, each command will be polled for 2 second，a total of 10s, it is easy to some problem. like this: 2 [ 14.833404][ 6] [ T164] hda 0006:00: Codec #0 probe error; disabling it... 3 [ 14.844178][ 6] [ T164] hda 0006:00: codec_mask = 0x1 4 [ 14.880532][ 6] [ T164] hda 0006:00: too slow response, last cmd=0x0f0000 5 [ 15.891988][ 6] [ T164] hda 0006:00: too slow response, last cmd=0x0f0000 6 [ 16.978090][ 6] [ T164] hda 0006:00: too slow response, last cmd=0x0f0001 7 [ 18.140895][ 6] [ T164] hda 0006:00: too slow response, last cmd=0x0f0002 8 [ 19.135516][ 6] [ T164] hda 0006:00: too slow response, last cmd=0x0f0004 10 [ 19.900086][ 6] [ T164] hda 0006:00: no codecs initialized 11 [ 45.573398][ 2] [ C2] watchdog: BUG: soft lockup - CPU#2 stuck for 22s! [kworker/2:0:25] Here, when bus->codec_mask is 0, use a direct break to avoid execute snd_hda_codec_new function. Signed-off-by: songxiebing <songxiebing(a)kylinos.cn> --- sound/pci/hda/hda_controller.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/pci/hda/hda_controller.c b/sound/pci/hda/hda_controller.c index e5c53ad..e1ece0a 100644 --- a/sound/pci/hda/hda_controller.c +++ b/sound/pci/hda/hda_controller.c @@ -1474,6 +1474,9 @@ int azx_probe_codecs(struct azx *chip, unsigned int max_slots) dev_warn(chip->card->dev, "Codec #%d probe error; disabling it...\n", c); bus->codec_mask &= ~(1 << c); + /* no codecs */ + if (bus->codec_mask == 0) + break; /* More badly, accessing to a non-existing * codec often screws up the controller chip, * and disturbs the further communications. -- 2.7.4

2 3

Headset Mic no show at resume back
by Kailang 01 Mar '24

01 Mar '24

Hi Takashi, Attach patch will fix headset Mic no show issue. BR, Kailang

2 1

[PATCH v2 0/2] ASoC: nau8325: Modify driver code and dtschema.
by Seven Lee 01 Mar '24

01 Mar '24

Remove the "Clock detection" switch control, and modify dtschema for the explanation of "nuvoton,dac-vref". Change: V1 -> V2 - Revise the driver description part for the C++ comment. - In the nau8325_clkdet_put function, modify the max variable to hard code. - Removed "Clock Detection" switch control. - modify the "ALC Enable" switch name. - Revise the dtschema for "nuvoton,dac-vref". Seven Lee (2): ASoC: dt-bindings: Added schema for "nuvoton,nau8325" ASoC: nau8325: new driver .../bindings/sound/nuvoton,nau8325.yaml | 82 ++ sound/soc/codecs/nau8325.c | 856 ++++++++++++++++++ sound/soc/codecs/nau8325.h | 391 ++++++++ 3 files changed, 1329 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/nuvoton,nau8325.yaml create mode 100755 sound/soc/codecs/nau8325.c create mode 100644 sound/soc/codecs/nau8325.h -- 2.25.1

4 7