September 2023 - Alsa-devel - mailman.alsa-project.org

[GIT PULL] ASoC fixes for v6.6-rc2
by Mark Brown 20 Sep '23

20 Sep '23

The following changes since commit 0bb80ecc33a8fb5a682236443c1e740d5c917d1d: Linux 6.6-rc1 (2023-09-10 16:28:41 -0700) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git tags/asoc-fix-v6.6-rc2 for you to fetch changes up to 31bb7bd9ffee50d09ec931998b823a86132ab807: ASoC: SOF: core: Only call sof_ops_free() on remove if the probe was successful (2023-09-15 17:14:22 +0100) ---------------------------------------------------------------- ASoC: Fixes for v6.6 Quite a large collection of fixes, with numbers boosted by multiple vendors sending multi-patch serieses. Nothing super major, and also one device quirk. ---------------------------------------------------------------- August Wikerfors (1): ASoC: amd: yc: Fix non-functional mic on Lenovo 82QF and 82UG Bard Liao (1): ASoC: SOF: ipc4-topology: fix wrong sizeof argument Chancel Liu (1): ASoC: imx-rpmsg: Set ignore_pmdown_time for dai_link Charles Keepax (2): ASoC: soc-pcm: Shrink stack frame for __soc_pcm_hw_params ASoC: cs42l43: Add shared IRQ flag for shutters Chen Ni (1): ASoC: hdaudio.c: Add missing check for devm_kstrdup Dan Carpenter (1): ASoC: codecs: aw88395: Fix some error codes Guenter Roeck (1): ASoC: wm8960: Fix error handling in probe Hans de Goede (6): ASoC: rt5640: Revert "Fix sleep in atomic context" ASoC: rt5640: Fix sleep in atomic context ASoC: rt5640: Do not disable/enable IRQ twice on suspend/resume ASoC: rt5640: Enable the IRQ on resume after configuring jack-detect ASoC: rt5640: Fix IRQ not being free-ed for HDA jack detect mode ASoC: rt5640: Only cancel jack-detect work on suspend if active Jerome Brunet (1): ASoC: meson: spdifin: start hw on dai probe Julia Lawall (1): ASoC: rsnd: add missing of_node_put Mark Brown (3): Fix redundant PLLA update ASoC: rt5640: Fix various IRQ handling issues ASoC: cs42l42: Fix handling of hard reset Peter Ujfalusi (2): ASoC: SOF: sof-audio: Fix DSP core put imbalance on widget setup failure ASoC: SOF: core: Only call sof_ops_free() on remove if the probe was successful Ranjani Sridharan (1): ASoC: SOF: Intel: MTL: Reduce the DSP init timeout Richard Fitzgerald (7): ASoC: cs35l56: Call pm_runtime_dont_use_autosuspend() ASoC: cs35l56: Disable low-power hibernation mode ASoC: cs42l42: Ensure a reset pulse meets minimum pulse width. ASoC: cs42l42: Don't rely on GPIOD_OUT_LOW to set RESET initially low ASoC: cs42l42: Avoid stale SoundWire ATTACH after hard reset firmware: cirrus: cs_dsp: Only log list of algorithms in debug build ASoC: wm_adsp: Fix missing locking in wm_adsp_[read|write]_ctl() Sameer Pujar (2): ASoC: soc-utils: Export snd_soc_dai_is_dummy() symbol ASoC: tegra: Fix redundant PLLA and PLLA_OUT0 updates Shengjiu Wang (2): ASoC: fsl: imx-pcm-rpmsg: Add SNDRV_PCM_INFO_BATCH flag ASoC: imx-audmix: Fix return error with devm_clk_get() Walt Holman (1): Add DMI ID for MSI Bravo 15 B7ED drivers/firmware/cirrus/cs_dsp.c | 34 +++++++++++----------- sound/soc/amd/yc/acp6x-mach.c | 21 ++++++++++++++ sound/soc/codecs/aw88395/aw88395_lib.c | 2 ++ sound/soc/codecs/cs35l56-i2c.c | 1 - sound/soc/codecs/cs35l56.c | 1 + sound/soc/codecs/cs42l42-sdw.c | 20 +++++++++++++ sound/soc/codecs/cs42l42.c | 21 +++++++++++++- sound/soc/codecs/cs42l42.h | 1 + sound/soc/codecs/cs42l43.c | 14 +++++---- sound/soc/codecs/rt5640.c | 29 ++++++++----------- sound/soc/codecs/wm8960.c | 19 +++++++++---- sound/soc/codecs/wm_adsp.c | 13 +++++++-- sound/soc/fsl/imx-audmix.c | 2 +- sound/soc/fsl/imx-pcm-rpmsg.c | 1 + sound/soc/fsl/imx-rpmsg.c | 8 ++++++ sound/soc/intel/avs/boards/hdaudio.c | 3 ++ sound/soc/meson/axg-spdifin.c | 49 +++++++++++--------------------- sound/soc/sh/rcar/core.c | 1 + sound/soc/soc-pcm.c | 23 +++++++-------- sound/soc/soc-utils.c | 1 + sound/soc/sof/core.c | 3 +- sound/soc/sof/intel/mtl.c | 2 +- sound/soc/sof/intel/mtl.h | 1 - sound/soc/sof/ipc4-topology.c | 2 +- sound/soc/sof/sof-audio.c | 3 +- sound/soc/tegra/tegra_audio_graph_card.c | 30 ++++++++++--------- 26 files changed, 192 insertions(+), 113 deletions(-)

2 1

[PATCH 4.19 163/273] um: Fix hostaudio build errors
by Greg Kroah-Hartman 20 Sep '23

20 Sep '23

4.19-stable review patch. If anyone has any objections, please let me know. ------------------ From: Randy Dunlap <rdunlap(a)infradead.org> [ Upstream commit db4bfcba7bb8d10f00bba2a3da6b9a9c2a1d7b71 ] Use "select" to ensure that the required kconfig symbols are set as expected. Drop HOSTAUDIO since it is now equivalent to UML_SOUND. Set CONFIG_SOUND=m in ARCH=um defconfig files to maintain the status quo of the default configs. Allow SOUND with UML regardless of HAS_IOMEM. Otherwise there is a kconfig warning for unmet dependencies. (This was not an issue when SOUND was defined in arch/um/drivers/Kconfig. I have done 50 randconfig builds and didn't find any issues.) This fixes build errors when CONFIG_SOUND is not set: ld: arch/um/drivers/hostaudio_kern.o: in function `hostaudio_cleanup_module': hostaudio_kern.c:(.exit.text+0xa): undefined reference to `unregister_sound_mixer' ld: hostaudio_kern.c:(.exit.text+0x15): undefined reference to `unregister_sound_dsp' ld: arch/um/drivers/hostaudio_kern.o: in function `hostaudio_init_module': hostaudio_kern.c:(.init.text+0x19): undefined reference to `register_sound_dsp' ld: hostaudio_kern.c:(.init.text+0x31): undefined reference to `register_sound_mixer' ld: hostaudio_kern.c:(.init.text+0x49): undefined reference to `unregister_sound_dsp' and this kconfig warning: WARNING: unmet direct dependencies detected for SOUND Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Fixes: d886e87cb82b ("sound: make OSS sound core optional") Signed-off-by: Randy Dunlap <rdunlap(a)infradead.org> Reported-by: kernel test robot <lkp(a)intel.com> Closes: lore.kernel.org/r/202307141416.vxuRVpFv-lkp@intel.com Cc: Richard Weinberger <richard(a)nod.at> Cc: Anton Ivanov <anton.ivanov(a)cambridgegreys.com> Cc: Johannes Berg <johannes(a)sipsolutions.net> Cc: linux-um(a)lists.infradead.org Cc: Tejun Heo <tj(a)kernel.org> Cc: Takashi Iwai <tiwai(a)suse.de> Cc: Jaroslav Kysela <perex(a)perex.cz> Cc: Masahiro Yamada <masahiroy(a)kernel.org> Cc: Nathan Chancellor <nathan(a)kernel.org> Cc: Nick Desaulniers <ndesaulniers(a)google.com> Cc: Nicolas Schier <nicolas(a)fjasle.eu> Cc: linux-kbuild(a)vger.kernel.org Cc: alsa-devel(a)alsa-project.org Reviewed-by: Masahiro Yamada <masahiroy(a)kernel.org> Signed-off-by: Richard Weinberger <richard(a)nod.at> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- arch/um/configs/i386_defconfig | 1 + arch/um/configs/x86_64_defconfig | 1 + arch/um/drivers/Kconfig | 16 +++------------- arch/um/drivers/Makefile | 2 +- sound/Kconfig | 2 +- 5 files changed, 7 insertions(+), 15 deletions(-) diff --git a/arch/um/configs/i386_defconfig b/arch/um/configs/i386_defconfig index 8f114e3b0a7a3..8d06b799a0e4e 100644 --- a/arch/um/configs/i386_defconfig +++ b/arch/um/configs/i386_defconfig @@ -35,6 +35,7 @@ CONFIG_TTY_CHAN=y CONFIG_XTERM_CHAN=y CONFIG_CON_CHAN="pts" CONFIG_SSL_CHAN="pts" +CONFIG_SOUND=m CONFIG_UML_SOUND=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y diff --git a/arch/um/configs/x86_64_defconfig b/arch/um/configs/x86_64_defconfig index 5d0875fc0db25..446bdda4cbfb6 100644 --- a/arch/um/configs/x86_64_defconfig +++ b/arch/um/configs/x86_64_defconfig @@ -33,6 +33,7 @@ CONFIG_TTY_CHAN=y CONFIG_XTERM_CHAN=y CONFIG_CON_CHAN="pts" CONFIG_SSL_CHAN="pts" +CONFIG_SOUND=m CONFIG_UML_SOUND=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y diff --git a/arch/um/drivers/Kconfig b/arch/um/drivers/Kconfig index 2638e46f50ccd..494f7c27056e3 100644 --- a/arch/um/drivers/Kconfig +++ b/arch/um/drivers/Kconfig @@ -104,24 +104,14 @@ config SSL_CHAN config UML_SOUND tristate "Sound support" + depends on SOUND + select SOUND_OSS_CORE help This option enables UML sound support. If enabled, it will pull in - soundcore and the UML hostaudio relay, which acts as a intermediary + the UML hostaudio relay, which acts as a intermediary between the host's dsp and mixer devices and the UML sound system. It is safe to say 'Y' here. -config SOUND - tristate - default UML_SOUND - -config SOUND_OSS_CORE - bool - default UML_SOUND - -config HOSTAUDIO - tristate - default UML_SOUND - endmenu menu "UML Network Devices" diff --git a/arch/um/drivers/Makefile b/arch/um/drivers/Makefile index 693319839f69e..d945abf90c319 100644 --- a/arch/um/drivers/Makefile +++ b/arch/um/drivers/Makefile @@ -52,7 +52,7 @@ obj-$(CONFIG_UML_NET) += net.o obj-$(CONFIG_MCONSOLE) += mconsole.o obj-$(CONFIG_MMAPPER) += mmapper_kern.o obj-$(CONFIG_BLK_DEV_UBD) += ubd.o -obj-$(CONFIG_HOSTAUDIO) += hostaudio.o +obj-$(CONFIG_UML_SOUND) += hostaudio.o obj-$(CONFIG_NULL_CHAN) += null.o obj-$(CONFIG_PORT_CHAN) += port.o obj-$(CONFIG_PTY_CHAN) += pty.o diff --git a/sound/Kconfig b/sound/Kconfig index 1140e9988fc50..76febc37862de 100644 --- a/sound/Kconfig +++ b/sound/Kconfig @@ -1,6 +1,6 @@ menuconfig SOUND tristate "Sound card support" - depends on HAS_IOMEM + depends on HAS_IOMEM || UML help If you have a sound card in your computer, i.e. if it can say more than an occasional beep, say Y. -- 2.40.1

1 0

[PATCH 5.4 200/367] um: Fix hostaudio build errors
by Greg Kroah-Hartman 20 Sep '23

20 Sep '23

5.4-stable review patch. If anyone has any objections, please let me know. ------------------ From: Randy Dunlap <rdunlap(a)infradead.org> [ Upstream commit db4bfcba7bb8d10f00bba2a3da6b9a9c2a1d7b71 ] Use "select" to ensure that the required kconfig symbols are set as expected. Drop HOSTAUDIO since it is now equivalent to UML_SOUND. Set CONFIG_SOUND=m in ARCH=um defconfig files to maintain the status quo of the default configs. Allow SOUND with UML regardless of HAS_IOMEM. Otherwise there is a kconfig warning for unmet dependencies. (This was not an issue when SOUND was defined in arch/um/drivers/Kconfig. I have done 50 randconfig builds and didn't find any issues.) This fixes build errors when CONFIG_SOUND is not set: ld: arch/um/drivers/hostaudio_kern.o: in function `hostaudio_cleanup_module': hostaudio_kern.c:(.exit.text+0xa): undefined reference to `unregister_sound_mixer' ld: hostaudio_kern.c:(.exit.text+0x15): undefined reference to `unregister_sound_dsp' ld: arch/um/drivers/hostaudio_kern.o: in function `hostaudio_init_module': hostaudio_kern.c:(.init.text+0x19): undefined reference to `register_sound_dsp' ld: hostaudio_kern.c:(.init.text+0x31): undefined reference to `register_sound_mixer' ld: hostaudio_kern.c:(.init.text+0x49): undefined reference to `unregister_sound_dsp' and this kconfig warning: WARNING: unmet direct dependencies detected for SOUND Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Fixes: d886e87cb82b ("sound: make OSS sound core optional") Signed-off-by: Randy Dunlap <rdunlap(a)infradead.org> Reported-by: kernel test robot <lkp(a)intel.com> Closes: lore.kernel.org/r/202307141416.vxuRVpFv-lkp@intel.com Cc: Richard Weinberger <richard(a)nod.at> Cc: Anton Ivanov <anton.ivanov(a)cambridgegreys.com> Cc: Johannes Berg <johannes(a)sipsolutions.net> Cc: linux-um(a)lists.infradead.org Cc: Tejun Heo <tj(a)kernel.org> Cc: Takashi Iwai <tiwai(a)suse.de> Cc: Jaroslav Kysela <perex(a)perex.cz> Cc: Masahiro Yamada <masahiroy(a)kernel.org> Cc: Nathan Chancellor <nathan(a)kernel.org> Cc: Nick Desaulniers <ndesaulniers(a)google.com> Cc: Nicolas Schier <nicolas(a)fjasle.eu> Cc: linux-kbuild(a)vger.kernel.org Cc: alsa-devel(a)alsa-project.org Reviewed-by: Masahiro Yamada <masahiroy(a)kernel.org> Signed-off-by: Richard Weinberger <richard(a)nod.at> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- arch/um/configs/i386_defconfig | 1 + arch/um/configs/x86_64_defconfig | 1 + arch/um/drivers/Kconfig | 16 +++------------- arch/um/drivers/Makefile | 2 +- sound/Kconfig | 2 +- 5 files changed, 7 insertions(+), 15 deletions(-) diff --git a/arch/um/configs/i386_defconfig b/arch/um/configs/i386_defconfig index 73e98bb57bf51..4229ac9165e83 100644 --- a/arch/um/configs/i386_defconfig +++ b/arch/um/configs/i386_defconfig @@ -35,6 +35,7 @@ CONFIG_TTY_CHAN=y CONFIG_XTERM_CHAN=y CONFIG_CON_CHAN="pts" CONFIG_SSL_CHAN="pts" +CONFIG_SOUND=m CONFIG_UML_SOUND=m CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y diff --git a/arch/um/configs/x86_64_defconfig b/arch/um/configs/x86_64_defconfig index 3281d7600225b..f6993a0067272 100644 --- a/arch/um/configs/x86_64_defconfig +++ b/arch/um/configs/x86_64_defconfig @@ -33,6 +33,7 @@ CONFIG_TTY_CHAN=y CONFIG_XTERM_CHAN=y CONFIG_CON_CHAN="pts" CONFIG_SSL_CHAN="pts" +CONFIG_SOUND=m CONFIG_UML_SOUND=m CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y diff --git a/arch/um/drivers/Kconfig b/arch/um/drivers/Kconfig index 388096fb45a25..12f54a4a3747d 100644 --- a/arch/um/drivers/Kconfig +++ b/arch/um/drivers/Kconfig @@ -104,24 +104,14 @@ config SSL_CHAN config UML_SOUND tristate "Sound support" + depends on SOUND + select SOUND_OSS_CORE help This option enables UML sound support. If enabled, it will pull in - soundcore and the UML hostaudio relay, which acts as a intermediary + the UML hostaudio relay, which acts as a intermediary between the host's dsp and mixer devices and the UML sound system. It is safe to say 'Y' here. -config SOUND - tristate - default UML_SOUND - -config SOUND_OSS_CORE - bool - default UML_SOUND - -config HOSTAUDIO - tristate - default UML_SOUND - endmenu menu "UML Network Devices" diff --git a/arch/um/drivers/Makefile b/arch/um/drivers/Makefile index a290821e355c2..4d7fb606a5f04 100644 --- a/arch/um/drivers/Makefile +++ b/arch/um/drivers/Makefile @@ -52,7 +52,7 @@ obj-$(CONFIG_UML_NET) += net.o obj-$(CONFIG_MCONSOLE) += mconsole.o obj-$(CONFIG_MMAPPER) += mmapper_kern.o obj-$(CONFIG_BLK_DEV_UBD) += ubd.o -obj-$(CONFIG_HOSTAUDIO) += hostaudio.o +obj-$(CONFIG_UML_SOUND) += hostaudio.o obj-$(CONFIG_NULL_CHAN) += null.o obj-$(CONFIG_PORT_CHAN) += port.o obj-$(CONFIG_PTY_CHAN) += pty.o diff --git a/sound/Kconfig b/sound/Kconfig index 36785410fbe15..aaf2022ffc57d 100644 --- a/sound/Kconfig +++ b/sound/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only menuconfig SOUND tristate "Sound card support" - depends on HAS_IOMEM + depends on HAS_IOMEM || UML help If you have a sound card in your computer, i.e. if it can say more than an occasional beep, say Y. -- 2.40.1

1 0

[PATCH v4 00/28] Add support for QMC HDLC, framer infrastruture and PEF2256 framer (v4)
by Christophe Leroy 20 Sep '23

20 Sep '23

From: Herve Codina <herve.codina(a)bootlin.com> Hi, TLDR: This is a resend of v3 with a build failure fix in patch 21. No other changes. I have a system where I need to handle an HDLC interface and some audio data. The HDLC data are transferred using a TDM bus on which a PEF2256 (E1/T1 framer) is present. The PEF2256 transfers data from/to the TDM bus to/from the E1 line. This PEF2256 is connected to a PowerQUICC SoC for the control path and the TDM is connected to the SoC (QMC component) for the data path. From the QMC HDLC driver, I need to handle HDLC data using the QMC, carrier detection using the PEF2256 (E1 line carrier) and set/get some PEF2256 configuration. The QMC HDLC driver considers the PEF2256 as a generic framer. It performs operations that involve the PEF2256 through the generic framer API. The audio data are exchanged with the PEF2256 using a CPU DAI connected to the TDM bus through the QMC and the PEF2256 needs to be seen as a codec in order to be linked to the CPU DAI. The codec handles the carrier detection using the PEF2256 and reports the carrier state to the ALSA subsystem using the ASoC jack detection. The codec, even if instantiated by the PEF2256 driver, considers the PEF2256 as a generic framer. The generic framer has: - 2 consumers (QMC HDLC drv and codec) - 1 provider (PEF2256) So, the design is the following: +------------------+ +---------+ | QMC | <- TDM -> | PEF2256 | <-> E1 +---------+ | +-------------+ | | | | CPU DAI | <-data--> | QMC channel | | | | +---------+ | +-------------+ | | | +--------------+ | +-------------+ | | | | QMC HDLC drv | <-data--> | QMC channel | | | | +--------------+ | +-------------+ | | | ^ +------------------+ | | | +--------+ +-------------+ | | +-> | framer | <-> | PEF2256 drv | <- local bus ->| | | | | | +---------+ +-> | | | | | +--------+ | +-------+ | +-------------------> | codec | | | +-------+ | +-------------+ Further more, the TDM timeslots used by the QMC HDLC driver need to be configured at runtime (QMC dynamic timeslots). Several weeks ago, I sent two series related to this topic: - Add the Lantiq PEF2256 audio support [1] - RFC Add support for QMC HDLC and PHY [2] This current series is a rework of these two series taking into account feedbacks previously received. In order to implement all of this, I do the following: 1) Perform some fixes (patches 1, 2, 3, 4) 2) Introduce the QMC HDLC driver (patches 5, 6, 7) 3) Add QMC dynamic timeslot support (patches 8 - 18) 4) Add timeslots change support in QMC HDLC (patch 19) 5) Introduce framer infrastructure (patch 20) 6) Add PEF2256 framer provider (patches 11, 22, 23, 24, 25) 7) Add framer codec as a framer consumer (patch 26) 8) Add framer support as a framer consumer in QMC HDLC (patch 27, 28) The series contains the full story and detailed modifications. If needed, the series can be split and/or commmits can be squashed. Let me know. Compare to the previous iteration https://lore.kernel.org/linux-kernel/20230726150225.483464-1-herve.codina@b… This v3 series mainly: - Fixes some implementation details. - Adds a new patch (patch 5) to remove existing inline keyword in the QMC driver. - Squashes patches related to the QMC HDLC binding together. Best regards, Hervé [1]: https://lore.kernel.org/all/20230417171601.74656-1-herve.codina@bootlin.com/ [2]: https://lore.kernel.org/all/20230323103154.264546-1-herve.codina@bootlin.co… Changes v3 -> v4 - Fixes build failure with CONFIG_MODULES in patch 21 (net: wan: Add framer framework support) Changes v2 -> v3 - Patches 1, 2, 3, 4 Add 'Reviewed-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>' - New patch Remove inline keyword from the existing registers accessors helpers - Patch 6 (patches 5, 27 in v2) Update the binding title Squash patch 27 - Patch 7 (patch 6 in v2) Remove the cast in netdev_to_qmc_hdlc() Add 'Reviewed-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>' - Patch 8 (patch 7 in v2): No change - Patches 9, 10 (patches 8, 9 in v2) Add 'Reviewed-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>' - Patch 11 (patch 10 in v2) Remove inline keyword from the introduced qmc_clrsetbits16() helper Add 'Reviewed-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>' - Patches 12, 13, 14, 15, 16, 17, 18, 19, 20 Add 'Reviewed-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>' - Patch 21 (patch 20 in v2) Remove unneeded framer NULL pointer check Add 'Reviewed-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>' - Patch 22 (patch 21 in v2) Change sclkr and sclkx clocks description Remove the framer phandle property from the framer subnodes (ie. from framer-codec nodes) - Patch 23 (patch 22 in v2) Initialize 'disabled' variable at declaration Fix commit log Add 'Reviewed-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>' - Patch 24 (patch 23 in v2) Remove inline keyword from the existing registers accessors helpers Use dev_warn_ratelimited() in default interrupt handler Add 'Reviewed-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>' - Patch 25 (patch 24 in v2) Replace #include "linux/bitfield.h" by #include <linux/bitfield.h> Fold the pinctrl anonymous struct into the struct pef2256_pinctrl Update commit log Add 'Reviewed-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>' - Patch 26 (patch 25 in v2) Add 'Reviewed-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>' - Patch 27 (patch 26 in v2) Fix error message Changed the ch.max computation in framer_dai_hw_rule_channels_by_format() Add 'Reviewed-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>' - Patch 28 Add 'Reviewed-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>' Changes v1 -> v2 - Patches 1, 2 (New in v2) Fix __iomem addresses declaration - Patch 19 (17 in v1) Fix a compilation warning - Patch 26 (24 in v1) Fix a typo in Kconfig file Fix issues raised by sparse (make C=1) Herve Codina (28): soc: fsl: cpm1: tsa: Fix __iomem addresses declaration soc: fsl: cpm1: qmc: Fix __iomem addresses declaration soc: fsl: cpm1: qmc: Fix rx channel reset soc: fsl: cpm1: qmc: Extend the API to provide Rx status soc: fsl: cpm1: qmc: Remove inline function specifiers dt-bindings: net: Add support for QMC HDLC net: wan: Add support for QMC HDLC MAINTAINERS: Add the Freescale QMC HDLC driver entry soc: fsl: cpm1: qmc: Introduce available timeslots masks soc: fsl: cpm1: qmc: Rename qmc_setup_tsa* to qmc_init_tsa* soc: fsl: cpm1: qmc: Introduce qmc_chan_setup_tsa* soc: fsl: cpm1: qmc: Remove no more needed checks from qmc_check_chans() soc: fsl: cpm1: qmc: Check available timeslots in qmc_check_chans() soc: fsl: cpm1: qmc: Add support for disabling channel TSA entries soc: fsl: cpm1: qmc: Split Tx and Rx TSA entries setup soc: fsl: cpm1: qmc: Introduce is_tsa_64rxtx flag soc: fsl: cpm1: qmc: Handle timeslot entries at channel start() and stop() soc: fsl: cpm1: qmc: Remove timeslots handling from setup_chan() soc: fsl: cpm1: qmc: Introduce functions to change timeslots at runtime wan: qmc_hdlc: Add runtime timeslots changes support net: wan: Add framer framework support dt-bindings: net: Add the Lantiq PEF2256 E1/T1/J1 framer mfd: core: Ensure disabled devices are skiped without aborting net: wan: framer: Add support for the Lantiq PEF2256 framer pinctrl: Add support for the Lantic PEF2256 pinmux MAINTAINERS: Add the Lantiq PEF2256 driver entry ASoC: codecs: Add support for the framer codec net: wan: fsl_qmc_hdlc: Add framer support .../devicetree/bindings/net/fsl,qmc-hdlc.yaml | 46 + .../bindings/net/lantiq,pef2256.yaml | 219 +++++ MAINTAINERS | 17 + drivers/mfd/mfd-core.c | 17 +- drivers/net/wan/Kconfig | 14 + drivers/net/wan/Makefile | 3 + drivers/net/wan/framer/Kconfig | 35 + drivers/net/wan/framer/Makefile | 7 + drivers/net/wan/framer/framer-core.c | 886 ++++++++++++++++++ drivers/net/wan/framer/pef2256/Makefile | 8 + drivers/net/wan/framer/pef2256/pef2256-regs.h | 250 +++++ drivers/net/wan/framer/pef2256/pef2256.c | 880 +++++++++++++++++ drivers/net/wan/fsl_qmc_hdlc.c | 820 ++++++++++++++++ drivers/pinctrl/Kconfig | 14 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-pef2256-regs.h | 65 ++ drivers/pinctrl/pinctrl-pef2256.c | 308 ++++++ drivers/soc/fsl/qe/qmc.c | 501 ++++++++-- drivers/soc/fsl/qe/tsa.c | 22 +- include/linux/framer/framer-provider.h | 194 ++++ include/linux/framer/framer.h | 199 ++++ include/linux/framer/pef2256.h | 31 + include/soc/fsl/qe/qmc.h | 25 +- sound/soc/codecs/Kconfig | 15 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/framer-codec.c | 413 ++++++++ sound/soc/fsl/fsl_qmc_audio.c | 2 +- 27 files changed, 4872 insertions(+), 122 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/fsl,qmc-hdlc.yaml create mode 100644 Documentation/devicetree/bindings/net/lantiq,pef2256.yaml create mode 100644 drivers/net/wan/framer/Kconfig create mode 100644 drivers/net/wan/framer/Makefile create mode 100644 drivers/net/wan/framer/framer-core.c create mode 100644 drivers/net/wan/framer/pef2256/Makefile create mode 100644 drivers/net/wan/framer/pef2256/pef2256-regs.h create mode 100644 drivers/net/wan/framer/pef2256/pef2256.c create mode 100644 drivers/net/wan/fsl_qmc_hdlc.c create mode 100644 drivers/pinctrl/pinctrl-pef2256-regs.h create mode 100644 drivers/pinctrl/pinctrl-pef2256.c create mode 100644 include/linux/framer/framer-provider.h create mode 100644 include/linux/framer/framer.h create mode 100644 include/linux/framer/pef2256.h create mode 100644 sound/soc/codecs/framer-codec.c -- 2.41.0

9 47

[PATCH] ALSA: hda: cirrus_scodec: Select GPIOLIB for KUnit test
by Richard Fitzgerald 20 Sep '23

20 Sep '23

The KUnit test for cirrus_scodec uses GPIO library functions so select GPIOLIB in Kconfig. This fixes the ld failures on builds that didn't already select GPIOLIB. ld: vmlinux.o: in function `cirrus_scodec_test_gpio_get': sound/pci/hda/cirrus_scodec_test.c:40: undefined reference to `gpiochip_get_data' ld: vmlinux.o: in function `cirrus_scodec_test_gpio_probe': sound/pci/hda/cirrus_scodec_test.c:94: undefined reference to `gpiochip_generic_request' ld: sound/pci/hda/cirrus_scodec_test.c:94: undefined reference to `gpiochip_generic_free' ld: sound/pci/hda/cirrus_scodec_test.c:95: undefined reference to `devm_gpiochip_add_data_with_key' Signed-off-by: Richard Fitzgerald <rf(a)opensource.cirrus.com> Reported-by: kernel test robot <lkp(a)intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202309201646.NnjfKPWk-lkp@intel.com/ Fixes: 2144833e7b41 ("ALSA: hda: cirrus_scodec: Add KUnit test") --- sound/pci/hda/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig index 706cdc589e6f..21a90b3c4cc7 100644 --- a/sound/pci/hda/Kconfig +++ b/sound/pci/hda/Kconfig @@ -97,6 +97,7 @@ config SND_HDA_CIRRUS_SCODEC config SND_HDA_CIRRUS_SCODEC_KUNIT_TEST tristate "KUnit test for Cirrus side-codec library" if !KUNIT_ALL_TESTS select SND_HDA_CIRRUS_SCODEC + select GPIOLIB depends on KUNIT default KUNIT_ALL_TESTS help -- 2.30.2

2 1

[PATCH] ASoC: hdac_hda: add HDA patch loader support
by Bard Liao 20 Sep '23

20 Sep '23

HDA patch loader is supported by legacy HDA driver. Implement it on ASoC HDA driver, too. Signed-off-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen(a)linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Rander Wang <rander.wang(a)intel.com> --- sound/soc/codecs/hdac_hda.c | 28 ++++++++++++++++++++++++++++ sound/soc/codecs/hdac_hda.h | 4 ++++ sound/soc/intel/skylake/skl.c | 1 + sound/soc/sof/intel/hda-codec.c | 1 + 4 files changed, 34 insertions(+) diff --git a/sound/soc/codecs/hdac_hda.c b/sound/soc/codecs/hdac_hda.c index be66853afbe2..8f5d97949d3d 100644 --- a/sound/soc/codecs/hdac_hda.c +++ b/sound/soc/codecs/hdac_hda.c @@ -7,6 +7,7 @@ * codec drivers using hdac_ext_bus_ops ops. */ +#include <linux/firmware.h> #include <linux/init.h> #include <linux/delay.h> #include <linux/module.h> @@ -35,6 +36,13 @@ SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 |\ SNDRV_PCM_RATE_192000) +#ifdef CONFIG_SND_HDA_PATCH_LOADER +static char *loadable_patch[SNDRV_CARDS]; + +module_param_array_named(patch, loadable_patch, charp, NULL, 0444); +MODULE_PARM_DESC(patch, "Patch file for Intel HD audio interface."); +#endif + static int hdac_hda_dai_open(struct snd_pcm_substream *substream, struct snd_soc_dai *dai); static void hdac_hda_dai_close(struct snd_pcm_substream *substream, @@ -423,6 +431,26 @@ static int hdac_hda_codec_probe(struct snd_soc_component *component) dev_err(&hdev->dev, "failed to create hda codec %d\n", ret); goto error_no_pm; } + +#ifdef CONFIG_SND_HDA_PATCH_LOADER + if (loadable_patch[hda_pvt->dev_index] && *loadable_patch[hda_pvt->dev_index]) { + dev_info(&hdev->dev, "Applying patch firmware '%s'\n", + loadable_patch[hda_pvt->dev_index]); + ret = request_firmware(&hda_pvt->fw, loadable_patch[hda_pvt->dev_index], + &hdev->dev); + if (ret < 0) + goto error_no_pm; + if (hda_pvt->fw) { + ret = snd_hda_load_patch(hcodec->bus, hda_pvt->fw->size, hda_pvt->fw->data); + if (ret < 0) { + dev_err(&hdev->dev, "failed to load hda patch %d\n", ret); + goto error_no_pm; + } + release_firmware(hda_pvt->fw); + hda_pvt->fw = NULL; + } + } +#endif /* * Overwrite type to HDA_DEV_ASOC since it is a ASoC driver * hda_codec.c will check this flag to determine if unregister diff --git a/sound/soc/codecs/hdac_hda.h b/sound/soc/codecs/hdac_hda.h index b65560981abb..b7a12aea8d32 100644 --- a/sound/soc/codecs/hdac_hda.h +++ b/sound/soc/codecs/hdac_hda.h @@ -26,6 +26,10 @@ struct hdac_hda_priv { struct hda_codec *codec; struct hdac_hda_pcm pcm[HDAC_DAI_ID_NUM]; bool need_display_power; + int dev_index; +#ifdef CONFIG_SND_HDA_PATCH_LOADER + const struct firmware *fw; +#endif }; struct hdac_ext_bus_ops *snd_soc_hdac_hda_get_ops(void); diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index 77408a981b97..d753d393a428 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -736,6 +736,7 @@ static int probe_codec(struct hdac_bus *bus, int addr) return PTR_ERR(codec); hda_codec->codec = codec; + hda_codec->dev_index = addr; dev_set_drvdata(&codec->core.dev, hda_codec); /* use legacy bus only for HDA codecs, idisp uses ext bus */ diff --git a/sound/soc/sof/intel/hda-codec.c b/sound/soc/sof/intel/hda-codec.c index 8a5e99a898ec..28ecbebb4b84 100644 --- a/sound/soc/sof/intel/hda-codec.c +++ b/sound/soc/sof/intel/hda-codec.c @@ -169,6 +169,7 @@ static int hda_codec_probe(struct snd_sof_dev *sdev, int address) return ret; hda_priv->codec = codec; + hda_priv->dev_index = address; dev_set_drvdata(&codec->core.dev, hda_priv); if ((resp & 0xFFFF0000) == IDISP_VID_INTEL) { -- 2.25.1

4 3

sound/hda: Module loading problem of controller and codec
by yu tian 20 Sep '23

20 Sep '23

Hi Takashi, The following commit only gives a warning in menuconfig: "Set to Y if you want auto-loading the codec driver" d8f66c71d547 ("ALSA: hda - Add warning texts when codec driver Kconfig doesn't match") 78e34f34ac27 ("ALSA: hda - remove PCI dependency in Kconfig") The problem with module loading is because when SND_HDA=y, sound/pci/hda/hda_bind.c is not compiled as a module.There is a “#ifdef MODULE“ in the codec_bind_module function in this file. Why can't it be deleted directly?Or am I missing something?

1 0

[PATCH] ALSA: pcm: oss: Fix race at SNDCTL_DSP_SETTRIGGER There is a small race window at snd_pcm_oss_set_trigger() that is called from OSS PCM SNDCTL_DSP_SETTRIGGER ioctl; namely the function calls snd_pcm_oss_make_ready() at first, then takes the params_lock mutex for the rest. When the stream is set up again by another thread between them, it leads to inconsistency, and may result in unexpected results such as NULL dereference of OSS buffer as a fuzzer spotted recently.
by Ma Ke 20 Sep '23

20 Sep '23

The fix is simply to cover snd_pcm_oss_make_ready() call into the same params_lock mutex with snd_pcm_oss_make_ready_locked() variant. Signed-off-by: Ma Ke <make_ruc2021(a)163.com> --- sound/core/oss/pcm_oss.c | 16 ++++++---------- 1 file changed, 6 insertions(+), 10 deletions(-) diff --git a/sound/core/oss/pcm_oss.c b/sound/core/oss/pcm_oss.c index 728c211142d1..9a830aeeba63 100644 --- a/sound/core/oss/pcm_oss.c +++ b/sound/core/oss/pcm_oss.c @@ -2083,21 +2083,14 @@ static int snd_pcm_oss_set_trigger(struct snd_pcm_oss_file *pcm_oss_file, int tr psubstream = pcm_oss_file->streams[SNDRV_PCM_STREAM_PLAYBACK]; csubstream = pcm_oss_file->streams[SNDRV_PCM_STREAM_CAPTURE]; - if (psubstream) { - err = snd_pcm_oss_make_ready(psubstream); - if (err < 0) - return err; - } - if (csubstream) { - err = snd_pcm_oss_make_ready(csubstream); - if (err < 0) - return err; - } if (psubstream) { runtime = psubstream->runtime; cmd = 0; if (mutex_lock_interruptible(&runtime->oss.params_lock)) return -ERESTARTSYS; + err = snd_pcm_oss_make_ready_locked(psubstream); + if (err < 0) + goto _skip1; if (trigger & PCM_ENABLE_OUTPUT) { if (runtime->oss.trigger) goto _skip1; @@ -2128,6 +2121,9 @@ static int snd_pcm_oss_set_trigger(struct snd_pcm_oss_file *pcm_oss_file, int tr cmd = 0; if (mutex_lock_interruptible(&runtime->oss.params_lock)) return -ERESTARTSYS; + err = snd_pcm_oss_make_ready_locked(csubstream); + if (err < 0) + goto _skip2; if (trigger & PCM_ENABLE_INPUT) { if (runtime->oss.trigger) goto _skip2; -- 2.37.2

1 0

[PATCH v3 0/2] Support mute notifications for CS35L41 HDA
by Stefan Binding 20 Sep '23

20 Sep '23

Some systems use a special keyboard shortcut to mute speaker audio. On systems using CS35L41 HDA which have this shortcut, add a mechanism which uses ACPI notifications to determine when the shortcut is pressed, and then mute the amps inside the driver. Since this is not a normal mute mechanism, it does not go through userspace. To allow userspace to be able to track this special state, add an ALSA control which tracks the state of this forced mute Changes since v2: - Fixed compile issue when CONFIG_ACPI is missing Stefan Binding (1): ALSA: hda: cs35l41: Add read-only ALSA control for forced mute Vitaly Rodionov (1): ALSA: hda: cs35l41: Support mute notifications for CS35L41 HDA sound/pci/hda/cs35l41_hda.c | 132 ++++++++++++++++++++++++++++++---- sound/pci/hda/cs35l41_hda.h | 3 + sound/pci/hda/hda_component.h | 4 ++ sound/pci/hda/patch_realtek.c | 85 +++++++++++++++++++++- 4 files changed, 210 insertions(+), 14 deletions(-) -- 2.34.1

3 4

[PATCH v2 0/2] ASoC: Add rtq9128 audio amplifier
by cy_huang＠richtek.com 20 Sep '23

20 Sep '23

From: ChiYuan Huang <cy_huang(a)richtek.com> This patch series adds Richtek rtq9128 automotive audio amplifier support. It can deliver up to 4x75W into 4Ohm speaker from a 25V supply in automotive applications. Change log v2 - dt document fix listed in patch extra comment ChiYuan Huang (2): ASoC: dt-bindings: Add Richtek rtq9128 audio amplifier ASoC: codecs: Add Richtek rtq9128audio amplifier support .../bindings/sound/richtek,rtq9128.yaml | 54 ++ sound/soc/codecs/Kconfig | 15 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/rtq9128.c | 742 ++++++++++++++++++ 4 files changed, 813 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/richtek,rtq9128.yaml create mode 100644 sound/soc/codecs/rtq9128.c base-commit: ce9ecca0238b140b88f43859b211c9fdfd8e5b70 -- 2.34.1

5 7