August 2023 - Alsa-devel - mailman.alsa-project.org

[PATCH v4 00/32] Introduce QC USB SND audio offloading support
by Wesley Cheng 29 Aug '23

29 Aug '23

Several Qualcomm based chipsets can support USB audio offloading to a dedicated audio DSP, which can take over issuing transfers to the USB host controller. The intention is to reduce the load on the main processors in the SoC, and allow them to be placed into lower power modes. There are several parts to this design: 1. Adding ASoC binding layer 2. Create a USB backend for Q6DSP 3. Introduce XHCI interrupter support 4. Create vendor ops for the USB SND driver USB | ASoC -------------------------------------------------------------------- | _________________________ | |sm8250 platform card | | |_________________________| | | | | ___V____ ____V____ | |Q6USB | |Q6AFE | | |"codec" | |"cpu" | | |________| |_________| | ^ ^ ^ | | |________| | ___V____ | | |SOC-USB | | ________ ________ | | | |USB SND |<--->|QC offld|<------------>|________| | |(card.c)| | |<---------- | |________| |________|___ | | | ^ ^ | | | ____________V_________ | | | | | |APR/GLINK | __ V_______________V_____ | | | |______________________| |USB SND (endpoint.c) | | | | ^ |_________________________| | | | | ^ | | | ___________V___________ | | | |->|audio DSP | ___________V_____________ | | |_______________________| |XHCI HCD |<- | |_________________________| | Adding ASoC binding layer: soc-usb: Intention is to treat a USB port similar to a headphone jack. The port is always present on the device, but cable/pin status can be enabled/disabled. Expose mechanisms for USB backend ASoC drivers to communicate with USB SND. Create a USB backend for Q6DSP: q6usb: Basic backend driver that will be responsible for maintaining the resources needed to initiate a playback stream using the Q6DSP. Will be the entity that checks to make sure the connected USB audio device supports the requested PCM format. If it does not, the PCM open call will fail, and userpsace ALSA can take action accordingly. Introduce XHCI interrupter support: XHCI HCD supports multiple interrupters, which allows for events to be routed to different event rings. This is determined by "Interrupter Target" field specified in Section "6.4.1.1 Normal TRB" of the XHCI specification. Events in the offloading case will be routed to an event ring that is assigned to the audio DSP. Create vendor ops for the USB SND driver: qc_audio_offload: This particular driver has several components associated with it: - QMI stream request handler - XHCI interrupter and resource management - audio DSP memory management When the audio DSP wants to enable a playback stream, the request is first received by the ASoC platform sound card. Depending on the selected route, ASoC will bring up the individual DAIs in the path. The Q6USB backend DAI will send an AFE port start command (with enabling the USB playback path), and the audio DSP will handle the request accordingly. Part of the AFE USB port start handling will have an exchange of control messages using the QMI protocol. The qc_audio_offload driver will populate the buffer information: - Event ring base address - EP transfer ring base address and pass it along to the audio DSP. All endpoint management will now be handed over to the DSP, and the main processor is not involved in transfers. Overall, implementing this feature will still expose separate sound card and PCM devices for both the platorm card and USB audio device: 0 [SM8250MTPWCD938]: sm8250 - SM8250-MTP-WCD9380-WSA8810-VA-D SM8250-MTP-WCD9380-WSA8810-VA-DMIC 1 [Audio ]: USB-Audio - USB Audio Generic USB Audio at usb-xhci-hcd.1.auto-1.4, high speed This is to ensure that userspace ALSA entities can decide which route to take when executing the audio playback. In the above, if card#1 is selected, then USB audio data will take the legacy path over the USB PCM drivers, etc... This feature was validated using: - tinymix: set/enable the multimedia path to route to USB backend - tinyplay: issue playback on platform card Changelog -------------------------------------------- Changes in v4: - Rebased to xhci/for-usb-next - Addressed some dt-bindings comments XHCI: - Pulled in latest changes from Mathias' feature_interrupters branch: https://git.kernel.org/pub/scm/linux/kernel/git/mnyman/xhci.git/log/?h=feat… - Fixed commit text and signage for the XHCI sideband/interrupter related changes - Added some logic to address the FIXME tags mentioned throughout the commits, such as handling multi segment rings and building the SGT, locking concerns, and ep cleanup operations. - Removed some fixme tags for conditions that may not be needed/addressed. - Repurposed the new endpoint stop sync API to be utilized in other places. - Fixed potential compile issue if XHCI sideband config is not defined. ASoC: - Added sound jack control into the Q6USB driver. Allows for userpsace to know when an offload capable device is connected. USB SND: - Avoided exporting _snd_pcm_hw_param_set based on Takashi's recommendation. - Split USB QMI packet header definitions into a separate commit. This is used to properly allow the QMI interface driver to parse and route QMI packets accordingly - Added a "depends on" entry when enabling QC audio offload to avoid compile time issues. Changes in v3: - Changed prefix from RFC to PATCH - Rebased entire series to usb-next - Updated copyright years XHCI: - Rebased changes on top of XHCI changes merged into usb-next, and only added changes that were still under discussion. - Added change to read in the "num-hc-interrupters" device property. ASoC: - qusb6 USB backend - Incorporated suggestions to fetch iommu information with existing APIs - Added two new sound kcontrols to fetch offload status and offload device selection. - offload status - will return the card and pcm device in use tinymix -D 0 get 1 --> 1, 0 (offload in progress on card#1 pcm#0) - device selection - set the card and pcm device to enable offload on. Ex.: tinymix -D 0 set 1 2 0 --> sets offload on card#2 pcm#0 (this should be the USB card) USB SND: - Fixed up some locking related concerns for registering platform ops. - Moved callbacks under the register_mutex, so that - Modified APIs to properly pass more information about the USB SND device, so that the Q6USB backend can build a device list/map, in order to monitor offload status and device selection. Changes in v2: XHCI: - Replaced XHCI and HCD changes with Mathias' XHCI interrupter changes in his tree: https://git.kernel.org/pub/scm/linux/kernel/git/mnyman/xhci.git/log/?h=feat… Adjustments made to Mathias' changes: - Created xhci-intr.h to export/expose interrupter APIs versus exposing xhci.h. Moved dependent structures to this file as well. (so clients can parse out information from "struct xhci_interrupter") - Added some basic locking when requesting interrupters. - Fixed up some sanity checks. - Removed clearing of the ERSTBA during freeing of the interrupter. (pending issue where SMMU fault occurs if DMA addr returned is 64b - TODO) - Clean up pending events in the XHCI secondary interrupter. While testing USB bus suspend, it was seen that on bus resume, the xHCI HC would run into a command timeout. - Added offloading APIs to xHCI to fetch transfer and event ring information. ASoC: - Modified soc-usb to allow for multiple USB port additions. For this to work, the USB offload driver has to have a reference to the USB backend by adding a "usb-soc-be" DT entry to the device saved into XHCI sysdev. - Created separate dt-bindings for defining USB_RX port. - Increased APR timeout to accommodate the situation where the AFE port start command could be delayed due to having to issue a USB bus resume while handling the QMI stream start command. USB SND: - Added a platform ops during usb_audio_suspend(). This allows for the USB offload driver to halt the audio stream when system enters PM suspend. This ensures the audio DSP is not issuing transfers on the USB bus. - Do not override platform ops if they are already populated. - Introduce a shared status variable between the USB offload and USB SND layers, to ensure that only one path is active at a time. If the USB bus is occupied, then userspace is notified that the path is busy. Mathias Nyman (3): xhci: add support to allocate several interrupters xhci: add helper to stop endpoint and wait for completion xhci: sideband: add initial api to register a sideband entity Wesley Cheng (29): usb: host: xhci-mem: Cleanup pending secondary event ring events usb: host: xhci-mem: Allow for interrupter clients to choose specific index ASoC: Add SOC USB APIs for adding an USB backend ASoC: dt-bindings: qcom,q6dsp-lpass-ports: Add USB_RX port ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp ASoC: qdsp6: q6afe: Increase APR timeout ASoC: qcom: Add USB backend ASoC driver for Q6 sound: usb: card: Introduce USB SND platform op callbacks sound: usb: Export USB SND APIs for modules dt-bindings: usb: dwc3: Add snps,num-hc-interrupters definition usb: dwc3: Add DT parameter to specify maximum number of interrupters usb: host: xhci-plat: Set XHCI max interrupters if property is present sound: usb: pcm: Export fixed rate check USB SND API sound: usb: qcom: Add USB QMI definitions sound: usb: Introduce QC USB SND offloading support sound: usb: card: Check for support for requested audio format sound: soc: soc-usb: Add PCM format check API for USB backend sound: soc: qcom: qusb6: Ensure PCM format is supported by USB audio device sound: usb: Prevent starting of audio stream if in use ASoC: dt-bindings: Add Q6USB backend bindings ASoC: dt-bindings: Update example for enabling USB offload on SM8250 ASoC: qcom: qdsp6: q6afe: Split USB AFE dev_token param into separate API sound: Pass USB SND card and PCM information to SOC USB sound: soc: qdsp6: Add SND kcontrol to select offload device sound: soc: qdsp6: Add SND kcontrol for fetching offload status sound: soc: qcom: q6usb: Add headphone jack for offload connection status sound: usb: qc_audio_offload: Use card and PCM index from QMI request sound: usb: card: Allow for rediscovery of connected USB SND devices sound: soc: soc-usb: Rediscover USB SND devices on USB port add .../bindings/sound/qcom,q6usb-dais.yaml | 49 + .../bindings/sound/qcom,sm8250.yaml | 15 + .../devicetree/bindings/usb/snps,dwc3.yaml | 13 + arch/arm64/boot/dts/qcom/sm8350.dtsi.rej | 14 + arch/arm64/configs/defconfig.rej | 24 + drivers/usb/dwc3/core.c | 12 + drivers/usb/dwc3/core.h | 2 + drivers/usb/dwc3/host.c | 5 +- drivers/usb/host/Kconfig | 9 + drivers/usb/host/Makefile | 4 + drivers/usb/host/xhci-debugfs.c | 2 +- drivers/usb/host/xhci-hub.c | 29 +- drivers/usb/host/xhci-mem.c | 167 +- drivers/usb/host/xhci-plat.c | 2 + drivers/usb/host/xhci-ring.c | 2 +- drivers/usb/host/xhci-sideband.c | 195 ++ drivers/usb/host/xhci.c | 109 +- drivers/usb/host/xhci.h | 102 +- .../sound/qcom,q6dsp-lpass-ports.h | 1 + include/linux/usb/xhci-intr.h | 86 + include/linux/usb/xhci-sideband.h | 90 + include/sound/q6usboffload.h | 20 + include/sound/soc-usb.h | 39 + sound/core/oss/pcm_oss.c | 4 +- sound/soc/Makefile | 2 +- sound/soc/qcom/Kconfig | 4 + sound/soc/qcom/qdsp6/Makefile | 1 + sound/soc/qcom/qdsp6/q6afe-dai.c | 50 + sound/soc/qcom/qdsp6/q6afe.c | 208 +- sound/soc/qcom/qdsp6/q6afe.h | 47 +- sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c | 23 + sound/soc/qcom/qdsp6/q6dsp-lpass-ports.h | 1 + sound/soc/qcom/qdsp6/q6routing.c | 9 + sound/soc/qcom/qdsp6/q6usb.c | 458 +++++ sound/soc/soc-usb.c | 197 ++ sound/usb/Kconfig | 15 + sound/usb/Makefile | 2 +- sound/usb/card.c | 85 + sound/usb/card.h | 32 + sound/usb/endpoint.c | 2 + sound/usb/helper.c | 1 + sound/usb/pcm.c | 29 +- sound/usb/pcm.h | 12 + sound/usb/qcom/Makefile | 2 + sound/usb/qcom/qc_audio_offload.c | 1820 +++++++++++++++++ sound/usb/qcom/usb_audio_qmi_v01.c | 892 ++++++++ sound/usb/qcom/usb_audio_qmi_v01.h | 162 ++ 47 files changed, 4870 insertions(+), 179 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6usb-dais.yaml create mode 100644 arch/arm64/boot/dts/qcom/sm8350.dtsi.rej create mode 100644 arch/arm64/configs/defconfig.rej create mode 100644 drivers/usb/host/xhci-sideband.c create mode 100644 include/linux/usb/xhci-intr.h create mode 100644 include/linux/usb/xhci-sideband.h create mode 100644 include/sound/q6usboffload.h create mode 100644 include/sound/soc-usb.h create mode 100644 sound/soc/qcom/qdsp6/q6usb.c create mode 100644 sound/soc/soc-usb.c create mode 100644 sound/usb/qcom/Makefile create mode 100644 sound/usb/qcom/qc_audio_offload.c create mode 100644 sound/usb/qcom/usb_audio_qmi_v01.c create mode 100644 sound/usb/qcom/usb_audio_qmi_v01.h

10 68

[PATCH] ALSA: pcm: Fix missing fixup call in compat hw_refine ioctl
by Takashi Iwai 29 Aug '23

29 Aug '23

The update of rate_num/den and msbits were factored out to fixup_unreferenced_params() function to be called explicitly after the hw_refine or hw_params procedure. It's called from snd_pcm_hw_refine_user(), but it's forgotten in the PCM compat ioctl. This ended up with the incomplete rate_num/den and msbits parameters when 32bit compat ioctl is used. This patch adds the missing call in snd_pcm_ioctl_hw_params_compat(). Reported-by: Meng_Cai(a)novatek.com.cn Fixes: f9a076bff053 ("ALSA: pcm: calculate non-mask/non-interval parameters always when possible") Cc: <stable(a)vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/core/pcm_compat.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/sound/core/pcm_compat.c b/sound/core/pcm_compat.c index 42c2ada8e888..c96483091f30 100644 --- a/sound/core/pcm_compat.c +++ b/sound/core/pcm_compat.c @@ -253,10 +253,14 @@ static int snd_pcm_ioctl_hw_params_compat(struct snd_pcm_substream *substream, goto error; } - if (refine) + if (refine) { err = snd_pcm_hw_refine(substream, data); - else + if (err < 0) + goto error; + err = fixup_unreferenced_params(substream, data); + } else { err = snd_pcm_hw_params(substream, data); + } if (err < 0) goto error; if (copy_to_user(data32, data, sizeof(*data32)) || -- 2.35.3

3 2

[PATCH AUTOSEL 4.14 5/5] ALSA: seq: oss: Fix racy open/close of MIDI devices
by Sasha Levin 29 Aug '23

29 Aug '23

From: Takashi Iwai <tiwai(a)suse.de> [ Upstream commit 297224fc0922e7385573a30c29ffdabb67f27b7d ] Although snd_seq_oss_midi_open() and snd_seq_oss_midi_close() can be called concurrently from different code paths, we have no proper data protection against races. Introduce open_mutex to each seq_oss_midi object for avoiding the races. Reported-by: "Gong, Sishuai" <sishuai(a)purdue.edu> Closes: https://lore.kernel.org/r/7DC9AF71-F481-4ABA-955F-76C535661E33@purdue.edu Link: https://lore.kernel.org/r/20230612125533.27461-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/core/seq/oss/seq_oss_midi.c | 35 +++++++++++++++++++------------ 1 file changed, 22 insertions(+), 13 deletions(-) diff --git a/sound/core/seq/oss/seq_oss_midi.c b/sound/core/seq/oss/seq_oss_midi.c index cc8f06638edca..7226c03f15934 100644 --- a/sound/core/seq/oss/seq_oss_midi.c +++ b/sound/core/seq/oss/seq_oss_midi.c @@ -50,6 +50,7 @@ struct seq_oss_midi { struct snd_midi_event *coder; /* MIDI event coder */ struct seq_oss_devinfo *devinfo; /* assigned OSSseq device */ snd_use_lock_t use_lock; + struct mutex open_mutex; }; @@ -184,6 +185,7 @@ snd_seq_oss_midi_check_new_port(struct snd_seq_port_info *pinfo) mdev->flags = pinfo->capability; mdev->opened = 0; snd_use_lock_init(&mdev->use_lock); + mutex_init(&mdev->open_mutex); /* copy and truncate the name of synth device */ strlcpy(mdev->name, pinfo->name, sizeof(mdev->name)); @@ -332,14 +334,16 @@ snd_seq_oss_midi_open(struct seq_oss_devinfo *dp, int dev, int fmode) int perm; struct seq_oss_midi *mdev; struct snd_seq_port_subscribe subs; + int err; if ((mdev = get_mididev(dp, dev)) == NULL) return -ENODEV; + mutex_lock(&mdev->open_mutex); /* already used? */ if (mdev->opened && mdev->devinfo != dp) { - snd_use_lock_free(&mdev->use_lock); - return -EBUSY; + err = -EBUSY; + goto unlock; } perm = 0; @@ -349,14 +353,14 @@ snd_seq_oss_midi_open(struct seq_oss_devinfo *dp, int dev, int fmode) perm |= PERM_READ; perm &= mdev->flags; if (perm == 0) { - snd_use_lock_free(&mdev->use_lock); - return -ENXIO; + err = -ENXIO; + goto unlock; } /* already opened? */ if ((mdev->opened & perm) == perm) { - snd_use_lock_free(&mdev->use_lock); - return 0; + err = 0; + goto unlock; } perm &= ~mdev->opened; @@ -381,13 +385,17 @@ snd_seq_oss_midi_open(struct seq_oss_devinfo *dp, int dev, int fmode) } if (! mdev->opened) { - snd_use_lock_free(&mdev->use_lock); - return -ENXIO; + err = -ENXIO; + goto unlock; } mdev->devinfo = dp; + err = 0; + + unlock: + mutex_unlock(&mdev->open_mutex); snd_use_lock_free(&mdev->use_lock); - return 0; + return err; } /* @@ -401,10 +409,9 @@ snd_seq_oss_midi_close(struct seq_oss_devinfo *dp, int dev) if ((mdev = get_mididev(dp, dev)) == NULL) return -ENODEV; - if (! mdev->opened || mdev->devinfo != dp) { - snd_use_lock_free(&mdev->use_lock); - return 0; - } + mutex_lock(&mdev->open_mutex); + if (!mdev->opened || mdev->devinfo != dp) + goto unlock; memset(&subs, 0, sizeof(subs)); if (mdev->opened & PERM_WRITE) { @@ -423,6 +430,8 @@ snd_seq_oss_midi_close(struct seq_oss_devinfo *dp, int dev) mdev->opened = 0; mdev->devinfo = NULL; + unlock: + mutex_unlock(&mdev->open_mutex); snd_use_lock_free(&mdev->use_lock); return 0; } -- 2.40.1

1 0

[PATCH AUTOSEL 4.19 5/5] ALSA: seq: oss: Fix racy open/close of MIDI devices
by Sasha Levin 29 Aug '23

29 Aug '23

From: Takashi Iwai <tiwai(a)suse.de> [ Upstream commit 297224fc0922e7385573a30c29ffdabb67f27b7d ] Although snd_seq_oss_midi_open() and snd_seq_oss_midi_close() can be called concurrently from different code paths, we have no proper data protection against races. Introduce open_mutex to each seq_oss_midi object for avoiding the races. Reported-by: "Gong, Sishuai" <sishuai(a)purdue.edu> Closes: https://lore.kernel.org/r/7DC9AF71-F481-4ABA-955F-76C535661E33@purdue.edu Link: https://lore.kernel.org/r/20230612125533.27461-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/core/seq/oss/seq_oss_midi.c | 35 +++++++++++++++++++------------ 1 file changed, 22 insertions(+), 13 deletions(-) diff --git a/sound/core/seq/oss/seq_oss_midi.c b/sound/core/seq/oss/seq_oss_midi.c index 838c3c8b403cb..2ddfd6fed122e 100644 --- a/sound/core/seq/oss/seq_oss_midi.c +++ b/sound/core/seq/oss/seq_oss_midi.c @@ -50,6 +50,7 @@ struct seq_oss_midi { struct snd_midi_event *coder; /* MIDI event coder */ struct seq_oss_devinfo *devinfo; /* assigned OSSseq device */ snd_use_lock_t use_lock; + struct mutex open_mutex; }; @@ -184,6 +185,7 @@ snd_seq_oss_midi_check_new_port(struct snd_seq_port_info *pinfo) mdev->flags = pinfo->capability; mdev->opened = 0; snd_use_lock_init(&mdev->use_lock); + mutex_init(&mdev->open_mutex); /* copy and truncate the name of synth device */ strlcpy(mdev->name, pinfo->name, sizeof(mdev->name)); @@ -332,14 +334,16 @@ snd_seq_oss_midi_open(struct seq_oss_devinfo *dp, int dev, int fmode) int perm; struct seq_oss_midi *mdev; struct snd_seq_port_subscribe subs; + int err; if ((mdev = get_mididev(dp, dev)) == NULL) return -ENODEV; + mutex_lock(&mdev->open_mutex); /* already used? */ if (mdev->opened && mdev->devinfo != dp) { - snd_use_lock_free(&mdev->use_lock); - return -EBUSY; + err = -EBUSY; + goto unlock; } perm = 0; @@ -349,14 +353,14 @@ snd_seq_oss_midi_open(struct seq_oss_devinfo *dp, int dev, int fmode) perm |= PERM_READ; perm &= mdev->flags; if (perm == 0) { - snd_use_lock_free(&mdev->use_lock); - return -ENXIO; + err = -ENXIO; + goto unlock; } /* already opened? */ if ((mdev->opened & perm) == perm) { - snd_use_lock_free(&mdev->use_lock); - return 0; + err = 0; + goto unlock; } perm &= ~mdev->opened; @@ -381,13 +385,17 @@ snd_seq_oss_midi_open(struct seq_oss_devinfo *dp, int dev, int fmode) } if (! mdev->opened) { - snd_use_lock_free(&mdev->use_lock); - return -ENXIO; + err = -ENXIO; + goto unlock; } mdev->devinfo = dp; + err = 0; + + unlock: + mutex_unlock(&mdev->open_mutex); snd_use_lock_free(&mdev->use_lock); - return 0; + return err; } /* @@ -401,10 +409,9 @@ snd_seq_oss_midi_close(struct seq_oss_devinfo *dp, int dev) if ((mdev = get_mididev(dp, dev)) == NULL) return -ENODEV; - if (! mdev->opened || mdev->devinfo != dp) { - snd_use_lock_free(&mdev->use_lock); - return 0; - } + mutex_lock(&mdev->open_mutex); + if (!mdev->opened || mdev->devinfo != dp) + goto unlock; memset(&subs, 0, sizeof(subs)); if (mdev->opened & PERM_WRITE) { @@ -423,6 +430,8 @@ snd_seq_oss_midi_close(struct seq_oss_devinfo *dp, int dev) mdev->opened = 0; mdev->devinfo = NULL; + unlock: + mutex_unlock(&mdev->open_mutex); snd_use_lock_free(&mdev->use_lock); return 0; } -- 2.40.1

1 0

[PATCH AUTOSEL 5.4 6/6] ALSA: seq: oss: Fix racy open/close of MIDI devices
by Sasha Levin 29 Aug '23

29 Aug '23

From: Takashi Iwai <tiwai(a)suse.de> [ Upstream commit 297224fc0922e7385573a30c29ffdabb67f27b7d ] Although snd_seq_oss_midi_open() and snd_seq_oss_midi_close() can be called concurrently from different code paths, we have no proper data protection against races. Introduce open_mutex to each seq_oss_midi object for avoiding the races. Reported-by: "Gong, Sishuai" <sishuai(a)purdue.edu> Closes: https://lore.kernel.org/r/7DC9AF71-F481-4ABA-955F-76C535661E33@purdue.edu Link: https://lore.kernel.org/r/20230612125533.27461-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/core/seq/oss/seq_oss_midi.c | 35 +++++++++++++++++++------------ 1 file changed, 22 insertions(+), 13 deletions(-) diff --git a/sound/core/seq/oss/seq_oss_midi.c b/sound/core/seq/oss/seq_oss_midi.c index f73ee0798aeab..be80ce72e0c72 100644 --- a/sound/core/seq/oss/seq_oss_midi.c +++ b/sound/core/seq/oss/seq_oss_midi.c @@ -37,6 +37,7 @@ struct seq_oss_midi { struct snd_midi_event *coder; /* MIDI event coder */ struct seq_oss_devinfo *devinfo; /* assigned OSSseq device */ snd_use_lock_t use_lock; + struct mutex open_mutex; }; @@ -171,6 +172,7 @@ snd_seq_oss_midi_check_new_port(struct snd_seq_port_info *pinfo) mdev->flags = pinfo->capability; mdev->opened = 0; snd_use_lock_init(&mdev->use_lock); + mutex_init(&mdev->open_mutex); /* copy and truncate the name of synth device */ strlcpy(mdev->name, pinfo->name, sizeof(mdev->name)); @@ -319,14 +321,16 @@ snd_seq_oss_midi_open(struct seq_oss_devinfo *dp, int dev, int fmode) int perm; struct seq_oss_midi *mdev; struct snd_seq_port_subscribe subs; + int err; if ((mdev = get_mididev(dp, dev)) == NULL) return -ENODEV; + mutex_lock(&mdev->open_mutex); /* already used? */ if (mdev->opened && mdev->devinfo != dp) { - snd_use_lock_free(&mdev->use_lock); - return -EBUSY; + err = -EBUSY; + goto unlock; } perm = 0; @@ -336,14 +340,14 @@ snd_seq_oss_midi_open(struct seq_oss_devinfo *dp, int dev, int fmode) perm |= PERM_READ; perm &= mdev->flags; if (perm == 0) { - snd_use_lock_free(&mdev->use_lock); - return -ENXIO; + err = -ENXIO; + goto unlock; } /* already opened? */ if ((mdev->opened & perm) == perm) { - snd_use_lock_free(&mdev->use_lock); - return 0; + err = 0; + goto unlock; } perm &= ~mdev->opened; @@ -368,13 +372,17 @@ snd_seq_oss_midi_open(struct seq_oss_devinfo *dp, int dev, int fmode) } if (! mdev->opened) { - snd_use_lock_free(&mdev->use_lock); - return -ENXIO; + err = -ENXIO; + goto unlock; } mdev->devinfo = dp; + err = 0; + + unlock: + mutex_unlock(&mdev->open_mutex); snd_use_lock_free(&mdev->use_lock); - return 0; + return err; } /* @@ -388,10 +396,9 @@ snd_seq_oss_midi_close(struct seq_oss_devinfo *dp, int dev) if ((mdev = get_mididev(dp, dev)) == NULL) return -ENODEV; - if (! mdev->opened || mdev->devinfo != dp) { - snd_use_lock_free(&mdev->use_lock); - return 0; - } + mutex_lock(&mdev->open_mutex); + if (!mdev->opened || mdev->devinfo != dp) + goto unlock; memset(&subs, 0, sizeof(subs)); if (mdev->opened & PERM_WRITE) { @@ -410,6 +417,8 @@ snd_seq_oss_midi_close(struct seq_oss_devinfo *dp, int dev) mdev->opened = 0; mdev->devinfo = NULL; + unlock: + mutex_unlock(&mdev->open_mutex); snd_use_lock_free(&mdev->use_lock); return 0; } -- 2.40.1

1 0

[PATCH AUTOSEL 5.10 7/7] ALSA: seq: oss: Fix racy open/close of MIDI devices
by Sasha Levin 29 Aug '23

29 Aug '23

From: Takashi Iwai <tiwai(a)suse.de> [ Upstream commit 297224fc0922e7385573a30c29ffdabb67f27b7d ] Although snd_seq_oss_midi_open() and snd_seq_oss_midi_close() can be called concurrently from different code paths, we have no proper data protection against races. Introduce open_mutex to each seq_oss_midi object for avoiding the races. Reported-by: "Gong, Sishuai" <sishuai(a)purdue.edu> Closes: https://lore.kernel.org/r/7DC9AF71-F481-4ABA-955F-76C535661E33@purdue.edu Link: https://lore.kernel.org/r/20230612125533.27461-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/core/seq/oss/seq_oss_midi.c | 35 +++++++++++++++++++------------ 1 file changed, 22 insertions(+), 13 deletions(-) diff --git a/sound/core/seq/oss/seq_oss_midi.c b/sound/core/seq/oss/seq_oss_midi.c index f73ee0798aeab..be80ce72e0c72 100644 --- a/sound/core/seq/oss/seq_oss_midi.c +++ b/sound/core/seq/oss/seq_oss_midi.c @@ -37,6 +37,7 @@ struct seq_oss_midi { struct snd_midi_event *coder; /* MIDI event coder */ struct seq_oss_devinfo *devinfo; /* assigned OSSseq device */ snd_use_lock_t use_lock; + struct mutex open_mutex; }; @@ -171,6 +172,7 @@ snd_seq_oss_midi_check_new_port(struct snd_seq_port_info *pinfo) mdev->flags = pinfo->capability; mdev->opened = 0; snd_use_lock_init(&mdev->use_lock); + mutex_init(&mdev->open_mutex); /* copy and truncate the name of synth device */ strlcpy(mdev->name, pinfo->name, sizeof(mdev->name)); @@ -319,14 +321,16 @@ snd_seq_oss_midi_open(struct seq_oss_devinfo *dp, int dev, int fmode) int perm; struct seq_oss_midi *mdev; struct snd_seq_port_subscribe subs; + int err; if ((mdev = get_mididev(dp, dev)) == NULL) return -ENODEV; + mutex_lock(&mdev->open_mutex); /* already used? */ if (mdev->opened && mdev->devinfo != dp) { - snd_use_lock_free(&mdev->use_lock); - return -EBUSY; + err = -EBUSY; + goto unlock; } perm = 0; @@ -336,14 +340,14 @@ snd_seq_oss_midi_open(struct seq_oss_devinfo *dp, int dev, int fmode) perm |= PERM_READ; perm &= mdev->flags; if (perm == 0) { - snd_use_lock_free(&mdev->use_lock); - return -ENXIO; + err = -ENXIO; + goto unlock; } /* already opened? */ if ((mdev->opened & perm) == perm) { - snd_use_lock_free(&mdev->use_lock); - return 0; + err = 0; + goto unlock; } perm &= ~mdev->opened; @@ -368,13 +372,17 @@ snd_seq_oss_midi_open(struct seq_oss_devinfo *dp, int dev, int fmode) } if (! mdev->opened) { - snd_use_lock_free(&mdev->use_lock); - return -ENXIO; + err = -ENXIO; + goto unlock; } mdev->devinfo = dp; + err = 0; + + unlock: + mutex_unlock(&mdev->open_mutex); snd_use_lock_free(&mdev->use_lock); - return 0; + return err; } /* @@ -388,10 +396,9 @@ snd_seq_oss_midi_close(struct seq_oss_devinfo *dp, int dev) if ((mdev = get_mididev(dp, dev)) == NULL) return -ENODEV; - if (! mdev->opened || mdev->devinfo != dp) { - snd_use_lock_free(&mdev->use_lock); - return 0; - } + mutex_lock(&mdev->open_mutex); + if (!mdev->opened || mdev->devinfo != dp) + goto unlock; memset(&subs, 0, sizeof(subs)); if (mdev->opened & PERM_WRITE) { @@ -410,6 +417,8 @@ snd_seq_oss_midi_close(struct seq_oss_devinfo *dp, int dev) mdev->opened = 0; mdev->devinfo = NULL; + unlock: + mutex_unlock(&mdev->open_mutex); snd_use_lock_free(&mdev->use_lock); return 0; } -- 2.40.1

1 0

[PATCH AUTOSEL 5.15 9/9] ALSA: seq: oss: Fix racy open/close of MIDI devices
by Sasha Levin 29 Aug '23

29 Aug '23

From: Takashi Iwai <tiwai(a)suse.de> [ Upstream commit 297224fc0922e7385573a30c29ffdabb67f27b7d ] Although snd_seq_oss_midi_open() and snd_seq_oss_midi_close() can be called concurrently from different code paths, we have no proper data protection against races. Introduce open_mutex to each seq_oss_midi object for avoiding the races. Reported-by: "Gong, Sishuai" <sishuai(a)purdue.edu> Closes: https://lore.kernel.org/r/7DC9AF71-F481-4ABA-955F-76C535661E33@purdue.edu Link: https://lore.kernel.org/r/20230612125533.27461-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/core/seq/oss/seq_oss_midi.c | 35 +++++++++++++++++++------------ 1 file changed, 22 insertions(+), 13 deletions(-) diff --git a/sound/core/seq/oss/seq_oss_midi.c b/sound/core/seq/oss/seq_oss_midi.c index 07efb38f58ac1..f2940b29595f0 100644 --- a/sound/core/seq/oss/seq_oss_midi.c +++ b/sound/core/seq/oss/seq_oss_midi.c @@ -37,6 +37,7 @@ struct seq_oss_midi { struct snd_midi_event *coder; /* MIDI event coder */ struct seq_oss_devinfo *devinfo; /* assigned OSSseq device */ snd_use_lock_t use_lock; + struct mutex open_mutex; }; @@ -172,6 +173,7 @@ snd_seq_oss_midi_check_new_port(struct snd_seq_port_info *pinfo) mdev->flags = pinfo->capability; mdev->opened = 0; snd_use_lock_init(&mdev->use_lock); + mutex_init(&mdev->open_mutex); /* copy and truncate the name of synth device */ strscpy(mdev->name, pinfo->name, sizeof(mdev->name)); @@ -322,15 +324,17 @@ snd_seq_oss_midi_open(struct seq_oss_devinfo *dp, int dev, int fmode) int perm; struct seq_oss_midi *mdev; struct snd_seq_port_subscribe subs; + int err; mdev = get_mididev(dp, dev); if (!mdev) return -ENODEV; + mutex_lock(&mdev->open_mutex); /* already used? */ if (mdev->opened && mdev->devinfo != dp) { - snd_use_lock_free(&mdev->use_lock); - return -EBUSY; + err = -EBUSY; + goto unlock; } perm = 0; @@ -340,14 +344,14 @@ snd_seq_oss_midi_open(struct seq_oss_devinfo *dp, int dev, int fmode) perm |= PERM_READ; perm &= mdev->flags; if (perm == 0) { - snd_use_lock_free(&mdev->use_lock); - return -ENXIO; + err = -ENXIO; + goto unlock; } /* already opened? */ if ((mdev->opened & perm) == perm) { - snd_use_lock_free(&mdev->use_lock); - return 0; + err = 0; + goto unlock; } perm &= ~mdev->opened; @@ -372,13 +376,17 @@ snd_seq_oss_midi_open(struct seq_oss_devinfo *dp, int dev, int fmode) } if (! mdev->opened) { - snd_use_lock_free(&mdev->use_lock); - return -ENXIO; + err = -ENXIO; + goto unlock; } mdev->devinfo = dp; + err = 0; + + unlock: + mutex_unlock(&mdev->open_mutex); snd_use_lock_free(&mdev->use_lock); - return 0; + return err; } /* @@ -393,10 +401,9 @@ snd_seq_oss_midi_close(struct seq_oss_devinfo *dp, int dev) mdev = get_mididev(dp, dev); if (!mdev) return -ENODEV; - if (! mdev->opened || mdev->devinfo != dp) { - snd_use_lock_free(&mdev->use_lock); - return 0; - } + mutex_lock(&mdev->open_mutex); + if (!mdev->opened || mdev->devinfo != dp) + goto unlock; memset(&subs, 0, sizeof(subs)); if (mdev->opened & PERM_WRITE) { @@ -415,6 +422,8 @@ snd_seq_oss_midi_close(struct seq_oss_devinfo *dp, int dev) mdev->opened = 0; mdev->devinfo = NULL; + unlock: + mutex_unlock(&mdev->open_mutex); snd_use_lock_free(&mdev->use_lock); return 0; } -- 2.40.1

1 0

[PATCH AUTOSEL 6.1 15/15] ALSA: seq: oss: Fix racy open/close of MIDI devices
by Sasha Levin 29 Aug '23

29 Aug '23

From: Takashi Iwai <tiwai(a)suse.de> [ Upstream commit 297224fc0922e7385573a30c29ffdabb67f27b7d ] Although snd_seq_oss_midi_open() and snd_seq_oss_midi_close() can be called concurrently from different code paths, we have no proper data protection against races. Introduce open_mutex to each seq_oss_midi object for avoiding the races. Reported-by: "Gong, Sishuai" <sishuai(a)purdue.edu> Closes: https://lore.kernel.org/r/7DC9AF71-F481-4ABA-955F-76C535661E33@purdue.edu Link: https://lore.kernel.org/r/20230612125533.27461-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/core/seq/oss/seq_oss_midi.c | 35 +++++++++++++++++++------------ 1 file changed, 22 insertions(+), 13 deletions(-) diff --git a/sound/core/seq/oss/seq_oss_midi.c b/sound/core/seq/oss/seq_oss_midi.c index 07efb38f58ac1..f2940b29595f0 100644 --- a/sound/core/seq/oss/seq_oss_midi.c +++ b/sound/core/seq/oss/seq_oss_midi.c @@ -37,6 +37,7 @@ struct seq_oss_midi { struct snd_midi_event *coder; /* MIDI event coder */ struct seq_oss_devinfo *devinfo; /* assigned OSSseq device */ snd_use_lock_t use_lock; + struct mutex open_mutex; }; @@ -172,6 +173,7 @@ snd_seq_oss_midi_check_new_port(struct snd_seq_port_info *pinfo) mdev->flags = pinfo->capability; mdev->opened = 0; snd_use_lock_init(&mdev->use_lock); + mutex_init(&mdev->open_mutex); /* copy and truncate the name of synth device */ strscpy(mdev->name, pinfo->name, sizeof(mdev->name)); @@ -322,15 +324,17 @@ snd_seq_oss_midi_open(struct seq_oss_devinfo *dp, int dev, int fmode) int perm; struct seq_oss_midi *mdev; struct snd_seq_port_subscribe subs; + int err; mdev = get_mididev(dp, dev); if (!mdev) return -ENODEV; + mutex_lock(&mdev->open_mutex); /* already used? */ if (mdev->opened && mdev->devinfo != dp) { - snd_use_lock_free(&mdev->use_lock); - return -EBUSY; + err = -EBUSY; + goto unlock; } perm = 0; @@ -340,14 +344,14 @@ snd_seq_oss_midi_open(struct seq_oss_devinfo *dp, int dev, int fmode) perm |= PERM_READ; perm &= mdev->flags; if (perm == 0) { - snd_use_lock_free(&mdev->use_lock); - return -ENXIO; + err = -ENXIO; + goto unlock; } /* already opened? */ if ((mdev->opened & perm) == perm) { - snd_use_lock_free(&mdev->use_lock); - return 0; + err = 0; + goto unlock; } perm &= ~mdev->opened; @@ -372,13 +376,17 @@ snd_seq_oss_midi_open(struct seq_oss_devinfo *dp, int dev, int fmode) } if (! mdev->opened) { - snd_use_lock_free(&mdev->use_lock); - return -ENXIO; + err = -ENXIO; + goto unlock; } mdev->devinfo = dp; + err = 0; + + unlock: + mutex_unlock(&mdev->open_mutex); snd_use_lock_free(&mdev->use_lock); - return 0; + return err; } /* @@ -393,10 +401,9 @@ snd_seq_oss_midi_close(struct seq_oss_devinfo *dp, int dev) mdev = get_mididev(dp, dev); if (!mdev) return -ENODEV; - if (! mdev->opened || mdev->devinfo != dp) { - snd_use_lock_free(&mdev->use_lock); - return 0; - } + mutex_lock(&mdev->open_mutex); + if (!mdev->opened || mdev->devinfo != dp) + goto unlock; memset(&subs, 0, sizeof(subs)); if (mdev->opened & PERM_WRITE) { @@ -415,6 +422,8 @@ snd_seq_oss_midi_close(struct seq_oss_devinfo *dp, int dev) mdev->opened = 0; mdev->devinfo = NULL; + unlock: + mutex_unlock(&mdev->open_mutex); snd_use_lock_free(&mdev->use_lock); return 0; } -- 2.40.1

1 0

[PATCH AUTOSEL 6.4 12/17] ASoC: rt1308-sdw: fix random louder sound
by Sasha Levin 29 Aug '23

29 Aug '23

From: Shuming Fan <shumingf(a)realtek.com> [ Upstream commit 37aba3190891d4de189bd5192ee95220e295f34d ] This patch uses a vendor register to check whether the system hibernated ever. The driver will only set the preset when the driver brings up or the system hibernated. It will avoid the unknown issue that makes the speaker output louder and can't control the volume. Signed-off-by: Shuming Fan <shumingf(a)realtek.com Link: https://lore.kernel.org/r/20230811093822.37573-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie(a)kernel.org Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/codecs/rt1308-sdw.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/rt1308-sdw.c b/sound/soc/codecs/rt1308-sdw.c index 1797af824f60b..e2699c0b117be 100644 --- a/sound/soc/codecs/rt1308-sdw.c +++ b/sound/soc/codecs/rt1308-sdw.c @@ -52,6 +52,7 @@ static bool rt1308_volatile_register(struct device *dev, unsigned int reg) case 0x300a: case 0xc000: case 0xc710: + case 0xcf01: case 0xc860 ... 0xc863: case 0xc870 ... 0xc873: return true; @@ -213,7 +214,7 @@ static int rt1308_io_init(struct device *dev, struct sdw_slave *slave) { struct rt1308_sdw_priv *rt1308 = dev_get_drvdata(dev); int ret = 0; - unsigned int tmp; + unsigned int tmp, hibernation_flag; if (rt1308->hw_init) return 0; @@ -242,6 +243,10 @@ static int rt1308_io_init(struct device *dev, struct sdw_slave *slave) pm_runtime_get_noresume(&slave->dev); + regmap_read(rt1308->regmap, 0xcf01, &hibernation_flag); + if ((hibernation_flag != 0x00) && rt1308->first_hw_init) + goto _preset_ready_; + /* sw reset */ regmap_write(rt1308->regmap, RT1308_SDW_RESET, 0); @@ -282,6 +287,12 @@ static int rt1308_io_init(struct device *dev, struct sdw_slave *slave) regmap_write(rt1308->regmap, 0xc100, 0xd7); regmap_write(rt1308->regmap, 0xc101, 0xd7); + /* apply BQ params */ + rt1308_apply_bq_params(rt1308); + + regmap_write(rt1308->regmap, 0xcf01, 0x01); + +_preset_ready_: if (rt1308->first_hw_init) { regcache_cache_bypass(rt1308->regmap, false); regcache_mark_dirty(rt1308->regmap); -- 2.40.1

1 0

[PATCH AUTOSEL 6.4 10/17] ALSA: hda/cs8409: Support new Dell Dolphin Variants
by Sasha Levin 29 Aug '23

29 Aug '23

From: Stefan Binding <sbinding(a)opensource.cirrus.com> [ Upstream commit 7c761166399bedfc89c928bef8015546d85a9099 ] Add 4 new Dell Dolphin Systems, same configuration as older systems. Signed-off-by: Stefan Binding <sbinding(a)opensource.cirrus.com> Link: https://lore.kernel.org/r/20230811123044.1045651-1-sbinding@opensource.cirr… Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/pci/hda/patch_cs8409-tables.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/pci/hda/patch_cs8409-tables.c b/sound/pci/hda/patch_cs8409-tables.c index b288874e401e5..36b411d1a9609 100644 --- a/sound/pci/hda/patch_cs8409-tables.c +++ b/sound/pci/hda/patch_cs8409-tables.c @@ -550,6 +550,10 @@ const struct snd_pci_quirk cs8409_fixup_tbl[] = { SND_PCI_QUIRK(0x1028, 0x0C50, "Dolphin", CS8409_DOLPHIN), SND_PCI_QUIRK(0x1028, 0x0C51, "Dolphin", CS8409_DOLPHIN), SND_PCI_QUIRK(0x1028, 0x0C52, "Dolphin", CS8409_DOLPHIN), + SND_PCI_QUIRK(0x1028, 0x0C73, "Dolphin", CS8409_DOLPHIN), + SND_PCI_QUIRK(0x1028, 0x0C75, "Dolphin", CS8409_DOLPHIN), + SND_PCI_QUIRK(0x1028, 0x0C7D, "Dolphin", CS8409_DOLPHIN), + SND_PCI_QUIRK(0x1028, 0x0C7F, "Dolphin", CS8409_DOLPHIN), {} /* terminator */ }; -- 2.40.1

1 0