July 2023 - Alsa-devel - mailman.alsa-project.org

[PATCH v3 0/3] AMD Vangogh support for NAU8821/MAX98388
by Cristian Ciocaltea 12 Jul '23

12 Jul '23

This patch series extends the Vangogh machine driver to support a variant based on the Nuvoton NAU88L21 Codec and the Analog Devices MAX98388 Speaker Amplifier. Changes in v3: * Dropped acp5x_max98388_hw_params() in PATCH 3/3 and rely on dai_link to set format, according to Mark's review * v2: https://lore.kernel.org/all/20230705134341.175889-1-cristian.ciocaltea@coll… Changes in v2: * Reworked series to ensure the existing devices based on the CS35L41 codec continue to work fine * Rebased onto next-20230703 Cristian Ciocaltea (3): ASoC: amd: vangogh: Make use of DRV_NAME ASoC: amd: vangogh: Use dmi_first_match() for DMI quirk handling ASoC: amd: vangogh: Add support for NAU8821/MAX98388 variant sound/soc/amd/Kconfig | 5 +- sound/soc/amd/vangogh/acp5x-mach.c | 149 +++++++++++++++++++++++++---- 2 files changed, 131 insertions(+), 23 deletions(-) -- 2.41.0

2 4

[PATCH v2 0/4] ASoC: remove copy of intlog10()
by Andy Shevchenko 12 Jul '23

12 Jul '23

The first three patches moves intlog10() to be available in entire kernel. The last one removes copy of it in one driver. Besides already good Lines of Code (LoC) statistics the upcoming users, if any, can utilize the exported functions. The series can be routed via ASoC tree (as Mauro suggested). Note, int_log.h is separated from math.h due to licensing. I dunno if we can mix two in a single header file. In any case we may do it later on. Changelog v2: - moved kernel doc inclusion to the generic place (Mauro) - added tags (Mauro, Mark) Andy Shevchenko (4): lib/math: Move dvb_math.c into lib/math/int_log.c lib/math/int_log: Use ARRAY_SIZE(logtable) where makes sense lib/math/int_log: Replace LGPL-2.1-or-later boilerplate with SPDX identifier ASoC: nau8825: Replace copied'n'pasted intlog10() Documentation/core-api/kernel-api.rst | 7 +- Documentation/driver-api/media/dtv-common.rst | 9 -- drivers/media/dvb-core/Makefile | 2 +- drivers/media/dvb-frontends/af9013_priv.h | 2 +- drivers/media/dvb-frontends/af9033_priv.h | 2 +- drivers/media/dvb-frontends/cxd2820r_priv.h | 2 +- drivers/media/dvb-frontends/cxd2841er.c | 2 +- .../cxd2880/cxd2880_tnrdmd_dvbt2_mon.c | 2 +- .../cxd2880/cxd2880_tnrdmd_dvbt_mon.c | 2 +- .../media/dvb-frontends/cxd2880/cxd2880_top.c | 2 +- drivers/media/dvb-frontends/dib7000p.c | 2 +- drivers/media/dvb-frontends/dib8000.c | 2 +- drivers/media/dvb-frontends/dib9000.c | 2 +- drivers/media/dvb-frontends/drxk_hard.c | 2 +- drivers/media/dvb-frontends/lgdt3305.c | 2 +- drivers/media/dvb-frontends/lgdt3306a.c | 2 +- drivers/media/dvb-frontends/lgdt330x.c | 2 +- drivers/media/dvb-frontends/m88ds3103_priv.h | 2 +- drivers/media/dvb-frontends/mn88443x.c | 2 +- drivers/media/dvb-frontends/mn88472_priv.h | 2 +- drivers/media/dvb-frontends/mn88473_priv.h | 2 +- drivers/media/dvb-frontends/or51132.c | 2 +- drivers/media/dvb-frontends/or51211.c | 2 +- drivers/media/dvb-frontends/rtl2830_priv.h | 2 +- drivers/media/dvb-frontends/rtl2832_priv.h | 2 +- drivers/media/dvb-frontends/si2165.c | 2 +- drivers/media/dvb-frontends/stv0367.c | 2 +- drivers/media/dvb-frontends/tc90522.c | 2 +- drivers/media/dvb-frontends/tda10048.c | 2 +- include/{media/dvb_math.h => linux/int_log.h} | 18 +--- lib/math/Makefile | 2 +- .../dvb-core/dvb_math.c => lib/math/int_log.c | 26 ++---- sound/soc/codecs/nau8825.c | 93 +------------------ 33 files changed, 49 insertions(+), 160 deletions(-) rename include/{media/dvb_math.h => linux/int_log.h} (63%) rename drivers/media/dvb-core/dvb_math.c => lib/math/int_log.c (84%) -- 2.40.0.1.gaa8946217a0b

3 6

[PATCH 1/2] ASoC: SOF: amd: add revision check for sending sha dma completion command
by Mastan Katragadda 12 Jul '23

12 Jul '23

ACP driver should send SHA DMA completion command to PSP module for RN platform only. Add a revision check for RN platform. Signed-off-by: Mastan Katragadda <Mastan.Katragadda(a)amd.com> --- sound/soc/sof/amd/acp.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/sound/soc/sof/amd/acp.c b/sound/soc/sof/amd/acp.c index 2ae76bcd3590..afb505461ea1 100644 --- a/sound/soc/sof/amd/acp.c +++ b/sound/soc/sof/amd/acp.c @@ -217,6 +217,7 @@ int configure_and_run_sha_dma(struct acp_dev_data *adata, void *image_addr, unsigned int image_length) { struct snd_sof_dev *sdev = adata->dev; + const struct sof_amd_acp_desc *desc = get_chip_info(sdev->pdata); unsigned int tx_count, fw_qualifier, val; int ret; @@ -251,9 +252,12 @@ int configure_and_run_sha_dma(struct acp_dev_data *adata, void *image_addr, return ret; } - ret = psp_send_cmd(adata, MBOX_ACP_SHA_DMA_COMMAND); - if (ret) - return ret; + /* psp_send_cmd only required for renoir platform (rev - 3) */ + if (desc->rev == 3) { + ret = psp_send_cmd(adata, MBOX_ACP_SHA_DMA_COMMAND); + if (ret) + return ret; + } ret = snd_sof_dsp_read_poll_timeout(sdev, ACP_DSP_BAR, ACP_SHA_DSP_FW_QUALIFIER, fw_qualifier, fw_qualifier & DSP_FW_RUN_ENABLE, -- 2.25.1

3 9

[PATCH v2] ASoC: stac9766: fix build errors with REGMAP_AC97
by Randy Dunlap 12 Jul '23

12 Jul '23

Select REGMAP_AC97 to fix these build errors: ERROR: modpost: "regmap_ac97_default_volatile" [sound/soc/codecs/snd-soc-stac9766.ko] undefined! ERROR: modpost: "__regmap_init_ac97" [sound/soc/codecs/snd-soc-stac9766.ko] undefined! Fixes: 6bbf787bb70c ("ASoC: stac9766: Convert to regmap") Signed-off-by: Randy Dunlap <rdunlap(a)infradead.org> Cc: Lars-Peter Clausen <lars(a)metafoo.de> Cc: Mark Brown <broonie(a)kernel.org> Cc: Liam Girdwood <lgirdwood(a)gmail.com> Cc: alsa-devel(a)alsa-project.org --- v2: rebase/resend sound/soc/codecs/Kconfig | 1 + 1 file changed, 1 insertion(+) diff -- a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -1707,6 +1707,7 @@ config SND_SOC_STA529 config SND_SOC_STAC9766 tristate depends on SND_SOC_AC97_BUS + select REGMAP_AC97 config SND_SOC_STI_SAS tristate "codec Audio support for STI SAS codec"

2 1

[PATCH 0/2] ASoC: mt8188: add memory-region support
by Trevor Wu 12 Jul '23

12 Jul '23

This series introduces support for memory-region, allowing afe memif to utilize the region specified in dts. Trevor Wu (2): ASoC: mediatek: mt8188: add memory-region support ASoC: dt-bindings: mediatek,mt8188-afe: add memory-region .../devicetree/bindings/sound/mediatek,mt8188-afe.yaml | 7 +++++++ sound/soc/mediatek/mt8188/mt8188-afe-pcm.c | 8 ++++++-- 2 files changed, 13 insertions(+), 2 deletions(-) -- 2.18.0

3 4

[PATCH] ASoC: soc-core: protect dlc->of_node under mutex
by Kuninori Morimoto 12 Jul '23

12 Jul '23

dlc->of_node will be set on snd_soc_get_dlc(), but we want 1) protect it by mutex, 2) set only when successed. This patch do it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> --- sound/soc/soc-core.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 11bc5250ffd0..fcc798e0b8f0 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -3262,8 +3262,6 @@ int snd_soc_get_dlc(const struct of_phandle_args *args, struct snd_soc_dai_link_ struct snd_soc_component *pos; int ret = -EPROBE_DEFER; - dlc->of_node = args->np; - mutex_lock(&client_mutex); for_each_component(pos) { struct device_node *component_of_node = soc_component_to_node(pos); @@ -3317,6 +3315,10 @@ int snd_soc_get_dlc(const struct of_phandle_args *args, struct snd_soc_dai_link_ break; } + + if (ret == 0) + dlc->of_node = args->np; + mutex_unlock(&client_mutex); return ret; } -- 2.25.1

2 1

[PATCH 0/8] ASoC: Intel: avs: New boards and fixes to existing ones
by Cezary Rojewski 12 Jul '23

12 Jul '23

Series adds support for two boards: es8336 and rt5663. The former is utilized by some KBL-based tablets whereas the latter unlocks Chromebooks with rt5663 i2c codecs. As existing implementation of es8336 (es8316.c) codec driver is not prepared to cope with KBL-based platforms, couple of small, clock-related changes precede anything avs-driver related. The tail of patchset cleans up existing implementation of rt5682. Amadeusz Sławiński (2): ASoC: Intel: avs: Add rt5663 machine board ASoC: Intel: avs: Load rt5663 board on KBL-based platforms Cezary Rojewski (6): ASoC: codecs: es8316: Add support for 24 MHz MCLK ASoC: codecs: es8316: Add support for S24_3LE format ASoC: Intel: avs: Add es8336 machine board ASoC: Intel: avs: Load es8336 board on KBL-based platforms ASoC: Intel: avs: rt5682: Add missing components ASoC: Intel: avs: rt5682: Tidy up hw_params() sound/soc/codecs/es8316.c | 5 +- sound/soc/intel/avs/board_selection.c | 16 ++ sound/soc/intel/avs/boards/Kconfig | 20 ++ sound/soc/intel/avs/boards/Makefile | 4 + sound/soc/intel/avs/boards/es8336.c | 315 ++++++++++++++++++++++++++ sound/soc/intel/avs/boards/rt5663.c | 254 +++++++++++++++++++++ sound/soc/intel/avs/boards/rt5682.c | 67 +++--- 7 files changed, 652 insertions(+), 29 deletions(-) create mode 100644 sound/soc/intel/avs/boards/es8336.c create mode 100644 sound/soc/intel/avs/boards/rt5663.c -- 2.25.1

2 9

[PATCH] ASoC: imx-pcm-rpmsg: Set PCM hardware parameters separately
by Chancel Liu 12 Jul '23

12 Jul '23

Different PCM devices may have different PCM hardware parameters. It requires PCM hardware parameters set separately if there is more than one rpmsg sound card. Signed-off-by: Chancel Liu <chancel.liu(a)nxp.com> --- sound/soc/fsl/imx-pcm-rpmsg.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/sound/soc/fsl/imx-pcm-rpmsg.c b/sound/soc/fsl/imx-pcm-rpmsg.c index 765dad607bf6..d63782b8bdef 100644 --- a/sound/soc/fsl/imx-pcm-rpmsg.c +++ b/sound/soc/fsl/imx-pcm-rpmsg.c @@ -228,6 +228,10 @@ static int imx_rpmsg_pcm_open(struct snd_soc_component *component, struct snd_pcm_substream *substream) { struct rpmsg_info *info = dev_get_drvdata(component->dev); + struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); + struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0); + struct fsl_rpmsg *rpmsg = dev_get_drvdata(cpu_dai->dev); + struct snd_pcm_hardware pcm_hardware; struct rpmsg_msg *msg; int ret = 0; int cmd; @@ -255,10 +259,11 @@ static int imx_rpmsg_pcm_open(struct snd_soc_component *component, info->send_message(msg, info); - imx_rpmsg_pcm_hardware.period_bytes_max = - imx_rpmsg_pcm_hardware.buffer_bytes_max / 2; + pcm_hardware = imx_rpmsg_pcm_hardware; + pcm_hardware.buffer_bytes_max = rpmsg->buffer_size; + pcm_hardware.period_bytes_max = pcm_hardware.buffer_bytes_max / 2; - snd_soc_set_runtime_hwparams(substream, &imx_rpmsg_pcm_hardware); + snd_soc_set_runtime_hwparams(substream, &pcm_hardware); ret = snd_pcm_hw_constraint_integer(substream->runtime, SNDRV_PCM_HW_PARAM_PERIODS); @@ -597,7 +602,6 @@ static int imx_rpmsg_pcm_new(struct snd_soc_component *component, if (ret) return ret; - imx_rpmsg_pcm_hardware.buffer_bytes_max = rpmsg->buffer_size; return snd_pcm_set_fixed_buffer_all(pcm, SNDRV_DMA_TYPE_DEV_WC, pcm->card->dev, rpmsg->buffer_size); } -- 2.25.1

3 2

[PATCH] ASoC: dt-bindings: nau8821: Convert to dtschema
by Seven Lee 12 Jul '23

12 Jul '23

Convert the NAU8821 audio CODEC bindings to DT schema. Signed-off-by: Seven Lee <wtli(a)nuvoton.com> --- .../devicetree/bindings/sound/nau8821.txt | 55 -------- .../bindings/sound/nuvoton,nau8821.yaml | 125 ++++++++++++++++++ 2 files changed, 125 insertions(+), 55 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/nau8821.txt create mode 100644 Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml diff --git a/Documentation/devicetree/bindings/sound/nau8821.txt b/Documentation/devicetree/bindings/sound/nau8821.txt deleted file mode 100644 index 7c84e7c7327a..000000000000 --- a/Documentation/devicetree/bindings/sound/nau8821.txt +++ /dev/null @@ -1,55 +0,0 @@ -Nuvoton NAU88L21 audio codec - -This device supports I2C only. - -Required properties: - - compatible : Must be "nuvoton,nau8821" - - - reg : the I2C address of the device. This is either 0x1B (CSB=0) or 0x54 (CSB=1). - -Optional properties: - - nuvoton,jkdet-enable: Enable jack detection via JKDET pin. - - nuvoton,jkdet-pull-enable: Enable JKDET pin pull. If set - pin pull enabled, - otherwise pin in high impedance state. - - nuvoton,jkdet-pull-up: Pull-up JKDET pin. If set then JKDET pin is pull up, otherwise pull down. - - nuvoton,jkdet-polarity: JKDET pin polarity. 0 - active high, 1 - active low. - - - nuvoton,vref-impedance: VREF Impedance selection - 0 - Open - 1 - 25 kOhm - 2 - 125 kOhm - 3 - 2.5 kOhm - - - nuvoton,micbias-voltage: Micbias voltage level. - 0 - VDDA - 1 - VDDA - 2 - VDDA * 1.1 - 3 - VDDA * 1.2 - 4 - VDDA * 1.3 - 5 - VDDA * 1.4 - 6 - VDDA * 1.53 - 7 - VDDA * 1.53 - - - nuvoton,jack-insert-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms - - nuvoton,jack-eject-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms - - - nuvoton,dmic-clk-threshold: the ADC threshold of DMIC clock. - - nuvoton,key_enable: Headset button detection switch. - -Example: - - headset: nau8821@1b { - compatible = "nuvoton,nau8821"; - reg = <0x1b>; - interrupt-parent = <&gpio>; - interrupts = <23 IRQ_TYPE_LEVEL_LOW>; - nuvoton,jkdet-enable; - nuvoton,jkdet-pull-enable; - nuvoton,jkdet-pull-up; - nuvoton,jkdet-polarity = <GPIO_ACTIVE_LOW>; - nuvoton,vref-impedance = <2>; - nuvoton,micbias-voltage = <6>; - nuvoton,jack-insert-debounce = <7>; - nuvoton,jack-eject-debounce = <7>; - nuvoton,dmic-clk-threshold = 3072000; - }; diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml new file mode 100644 index 000000000000..fc2f4ce4db88 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml @@ -0,0 +1,125 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nuvoton,nau8821.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NAU88L21 audio codec + +maintainers: + - Seven Lee <wtli(a)nuvoton.com> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: nuvoton,nau8821 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + nuvoton,jkdet-enable: + description: Enable jack detection via JKDET pin. + type: boolean + + nuvoton,jkdet-pull-enable: + description: Enable JKDET pin pull. If set - pin pull enabled, + otherwise pin in high impedance state. + type: boolean + + nuvoton,jkdet-pull-up: + description: Pull-up JKDET pin. If set then JKDET pin is pull up, + otherwise pull down. + type: boolean + + nuvoton,key-enable: + description: handles key press detection. + type: boolean + + nuvoton,jkdet-polarity: + description: JKDET pin polarity. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # active high + - 1 # active low + default: 1 + + nuvoton,micbias-voltage: + description: MICBIAS output level select. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # VDDA + - 1 # VDDA * 1 + - 2 # VDDA * 1.1 + - 3 # VDDA * 1.2 + - 4 # VDDA * 1.3 + - 5 # VDDA * 1.4 + - 6 # VDDA * 1.53 + - 7 # VDDA * 1.53 + default: 6 + + nuvoton,vref-impedance: + description: VMID Tie-off impedance select. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # open + - 1 # 25KOhms + - 2 # 125KOhms + - 3 # 2.5KOhms + default: 2 + + nuvoton,jack-insert-debounce: + description: number from 0 to 7 that sets debounce time to 2^(n+2)ms. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 7 + default: 7 + + nuvoton,jack-eject-debounce: + description: number from 0 to 7 that sets debounce time to 2^(n+2)ms. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 7 + default: 0 + + nuvoton,dmic-clk-threshold: + description: DMIC clock speed expected value. Unit is Hz. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 3072000 + + '#sound-dai-cells': + const: 0 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + codec@1b { + compatible = "nuvoton,nau8821"; + reg = <0x1b>; + interrupt-parent = <&gpio>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + nuvoton,jkdet-enable; + nuvoton,jkdet-pull-enable; + nuvoton,jkdet-pull-up; + nuvoton,key-enable; + nuvoton,jkdet-polarity = <GPIO_ACTIVE_LOW>; + nuvoton,micbias-voltage = <6>; + nuvoton,vref-impedance = <2>; + nuvoton,jack-insert-debounce = <7>; + nuvoton,jack-eject-debounce = <0>; + nuvoton,dmic-clk-threshold = <3072000>; + #sound-dai-cells = <0>; + }; + }; -- 2.25.1

4 4

[PATCH v6 00/13] Add support for IIO devices in ASoC
by Herve Codina 12 Jul '23

12 Jul '23

Several weeks ago, I sent a series [1] for adding a potentiometer as an auxiliary device in ASoC. The feedback was that the potentiometer should be directly handled in IIO (as other potentiometers) and something more generic should be present in ASoC in order to have a binding to import some IIO devices into sound cards. The series related to the IIO potentiometer device is already applied. This series introduces audio-iio-aux. Its goal is to offer the binding between IIO and ASoC. It exposes attached IIO devices as ASoC auxiliary devices and allows to control them through mixer controls. On my system, the IIO device is a potentiometer and it is present in an amplifier design present in the audio path. Compare to the previous iteration https://lore.kernel.org/linux-kernel/20230615152631.224529-1-herve.codina@b… This v6 series mainly: - Fixes comments - Does some minor code modification Best regards, Hervé [1] https://lore.kernel.org/linux-kernel/20230203111422.142479-1-herve.codina@b… [2] https://lore.kernel.org/linux-kernel/20230421085245.302169-1-herve.codina@b… Changes v5 -> v6 - Patches 3, 4, 11, 13 No changes - Patch 1 Add 'Reviewed-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com>' Add 'Reviewed-by: Rob Herring <robh(a)kernel.org>' - Patch 2 Add 'Reviewed-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com>' - Patches 5, 6 Add 'Acked-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com>' - Patch 7 Fix comments: 'buf' -> 'buff', '__unconst_typeof' -> '__unconst_integer_typeof' - Patch 8, 9, 10 Add 'Acked-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com>' - Patch 12 Set struct snd_kcontrol_new fields for the constrol variable at variable initalization. Add a missing blank line Add a comment related to min/max swapping Add 'Reviewed-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com>' Changes v4 -> v5 - Patches 1, 2, 3, 4, 5, 9, 10, 11, 12, 13 No changes. - Patch 6 Fix commit log. Add 'Reviewed-by: Andy Shevchenko <andy.shevchenko(a)gmail.com>' - Patch 7 Fix the macros to be able to use them with: - an array defined as int *buff; - an array defined as int buff[N]; - Rework the way to "unconstify" the temporary variable to avoid issues due to integer promotion. Add 'Reviewed-by: Andy Shevchenko <andy.shevchenko(a)gmail.com>' - Patch 8 Add 'Reviewed-by: Andy Shevchenko <andy.shevchenko(a)gmail.com>' Changes v3 -> v4 - Patches 1, 2 No changes. - Patches 3, 4, 5 Add 'Reviewed-by: Andy Shevchenko <andy.shevchenko(a)gmail.com>'. - Patch 6 (new in v4) Fix headers inclusion order. - Patch 7 (patch 6 in v3) Add a comment related to __must_be_array() Use __array[0] of *__array - Patch 8 (patch 7 in v3) Fix minmax.h inclusion order. Add 'Reviewed-by: Andy Shevchenko <andy.shevchenko(a)gmail.com>'. - Patch 9 (patch 8 in v3) Add 'Suggested-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com>'. Add 'Reviewed-by: Andy Shevchenko <andy.shevchenko(a)gmail.com>'. - Patch 10 (patch 9 in v3) Add 'Reviewed-by: Andy Shevchenko <andy.shevchenko(a)gmail.com>'. - Patch 11 (patch 10 in v3) Fix a typo. Add 'Suggested-by: Andy Shevchenko <andy.shevchenko(a)gmail.com>'. Add 'Reviewed-by: Andy Shevchenko <andy.shevchenko(a)gmail.com>'. - Patch 12 (patch 11 in v3) Fix typos in the commit log. Fix headers inclusion order. Removed unneeded variable initialization. Replace {0} by {}. Use struct device *dev in probe(). Check an error on the snd-control-invert-range property read. - Patch 13 (patch12 in v3) No changes. Changes v2 -> v3 - Patches 1, 2 No changes. - Patch 3, 4 Add 'Acked-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com>'. - Patch 5 (new in v3) Removed the 'unused' variable and check the null pointer when used. - Patch 6 (new in v3) Introduce {min,max}_array(). - Patch 7 (new in v3) Use max_array() in iio_channel_read_max(). - Patch 8 (new in v3) Replace a FIXME comment by a TODO one. - Patch 9 (patch 5 in v2) Removed the 'unused' variable and check the null pointer when used. Use min_array(). Remplace a FIXME comment by a TODO one. - Patch 10 (patch 6 in v2) Convert existing macros to return a compound litteral instead of adding a new helper. - Patch 11 (patch 7 in v2) Remove the file name from the C file header. Use directly converted DAPM macros. Replace <linux/module.h> by <linux/mod_devicetable.h>. Add <linux/platform_device.h>. Be sure that min <= max. Swap values if it is not the case. Move the bool structure member after the int ones. Remove unneeded assignements. Use dev_err_probe() when relevant. Use str_on_off(). Use static_assert() instead of BUILD_BUG_ON(). Remove unneeded comma and blank line. Use device_property_*() instead of the OF API. - patch 8 available in v2 removed as already applied - Patch 12 (patch 9 in v2) Use devm_add_action_or_reset(). Call simple_populate_aux() from simple_parse_of(). Changes v1 -> v2 - Patch 1 Rename simple-iio-aux to audio-iio-aux Rename invert to snd-control-invert-range Remove the /schemas/iio/iio-consumer.yaml reference Remove the unneeded '|' after description - Patch 2 (new in v2) Introduce the simple-audio-card additional-devs subnode - Patch 3 (new in v2) Check err before switch() in iio_channel_read_max() - Patch 4 (new in v2) Fix raw reads and raw writes documentation - Patch 5 (patch 2 in v1) Check err before switch() in iio_channel_read_min() Fix documentation - Patch 6 (path 3 in v1) No changes - Patch 7 (patch 4 in v1) Rename simple-iio-aux to audio-iio-aux Rename invert to snd-control-invert-range Remove the mask usage from audio_iio_aux_{get,put}_volsw helpers Use directly PTR_ERR() in dev_err_probe() parameter Remove the '!!' construction Remove of_match_ptr() - Patch 8 (new in v2) Add a missing of_node_put() in the simple-card driver - Patch 9 (new in v2) Handle additional-devs in the simple-card driver Herve Codina (13): ASoC: dt-bindings: Add audio-iio-aux ASoC: dt-bindings: simple-card: Add additional-devs subnode iio: inkern: Check error explicitly in iio_channel_read_max() iio: consumer.h: Fix raw values documentation notes iio: inkern: Remove the 'unused' variable usage in iio_channel_read_max() iio: inkern: Fix headers inclusion order minmax: Introduce {min,max}_array() iio: inkern: Use max_array() to get the maximum value from an array iio: inkern: Replace a FIXME comment by a TODO one iio: inkern: Add a helper to query an available minimum raw value ASoC: soc-dapm.h: Convert macros to return a compound literal ASoC: codecs: Add support for the generic IIO auxiliary devices ASoC: simple-card: Handle additional devices .../bindings/sound/audio-iio-aux.yaml | 64 ++++ .../bindings/sound/simple-card.yaml | 53 +++ drivers/iio/inkern.c | 86 ++++- include/linux/iio/consumer.h | 37 +- include/linux/minmax.h | 64 ++++ include/sound/soc-dapm.h | 138 ++++--- sound/soc/codecs/Kconfig | 12 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/audio-iio-aux.c | 344 ++++++++++++++++++ sound/soc/generic/simple-card.c | 46 ++- 10 files changed, 775 insertions(+), 71 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/audio-iio-aux.yaml create mode 100644 sound/soc/codecs/audio-iio-aux.c -- 2.40.1

3 29