June 2023 - Alsa-devel - mailman.alsa-project.org

[PATCH 1/2] ASoC: dt-bindings: qcom,wsa8840: Add WSA884x family of speakers
by Krzysztof Kozlowski 08 Jun '23

08 Jun '23

Add binding for WSA8840/WSA8845/WSA8845H smart speaker amplifiers used in Qualcomm QRD8550 board with SM8550 SoC. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- .../bindings/sound/qcom,wsa8840.yaml | 66 +++++++++++++++++++ 1 file changed, 66 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml new file mode 100644 index 000000000000..a999f787aa4d --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,wsa8840.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm WSA8840/WSA8845/WSA8845H smart speaker amplifier + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> + - Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> + +description: + WSA884X is a family of Qualcomm Aqstic smart speaker amplifiers using + SoundWire digital audio interface. + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: sdw10217020400 + + reg: + maxItems: 1 + + powerdown-gpios: + description: Powerdown/Shutdown line to use (pin SD_N) + maxItems: 1 + + '#sound-dai-cells': + const: 0 + + vdd-1p8-supply: true + vdd-io-supply: true + +required: + - compatible + - reg + - powerdown-gpios + - '#sound-dai-cells' + - vdd-1p8-supply + - vdd-io-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + soundwire-controller { + #address-cells = <2>; + #size-cells = <0>; + + speaker@0,1 { + compatible = "sdw10217020400"; + reg = <0 1>; + pinctrl-names = "default"; + pinctrl-0 = <&spkr_2_sd_n_active>; + powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l3g_1p2>; + }; + }; -- 2.34.1

1 2

[PATCH v2] SoC: mediatek: mt8188-mt6359: clean up a return in codec_init
by Dan Carpenter 08 Jun '23

08 Jun '23

This code triggers a Smatch static checker warning and does sort of look like an error path. sound/soc/mediatek/mt8188/mt8188-mt6359.c:597 mt8188_max98390_codec_init() warn: missing error code? 'ret' However, returning 0 is intentional. Make that explicit. Signed-off-by: Dan Carpenter <dan.carpenter(a)linaro.org> --- v2: At first I thought this was an error path but it is a not. sound/soc/mediatek/mt8188/mt8188-mt6359.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/mediatek/mt8188/mt8188-mt6359.c b/sound/soc/mediatek/mt8188/mt8188-mt6359.c index bc4b74970a46..5ad8d2a5bbc4 100644 --- a/sound/soc/mediatek/mt8188/mt8188-mt6359.c +++ b/sound/soc/mediatek/mt8188/mt8188-mt6359.c @@ -594,7 +594,7 @@ static int mt8188_max98390_codec_init(struct snd_soc_pcm_runtime *rtd) } if (rtd->dai_link->num_codecs <= 2) - return ret; + return 0; /* add widgets/controls/dapm for rear speakers */ ret = snd_soc_dapm_new_controls(&card->dapm, mt8188_rear_spk_widgets, -- 2.39.2

3 3

[PATCH V3 0/9] ASoC: amd: ps: add SoundWire support
by Vijendar Mukunda 08 Jun '23

08 Jun '23

This patch series add support for - Platform device creation for SoundWire Manager instances and PDM controller. - SoundWire DMA driver. - Interrupt handling for SoundWire manager related interrupts, SoundWire DMA interrupts and ACP error interrupts. - ACP PCI driver PM ops modification with respect to SoundWire Power modes. Changes since v1: - update "soundwire" as "SoundWire" in code. - add comments for platform device mask and platform device count - remove unused variables in acp pci driver private data structure - refactor dma enable register structures in SoundWire DMA driver - add TODO comments in IRQ handler - update IRQ mask values using bit macros - Fix build error reported in Makefile - rename "sdw_dma_stream_instance" structure name as "acp_sdw_dma_stream" changes since v2: - add comments in irq handler. - remove workqueue for SoundWire DMA interrupts and use thread implementation for DMA interrupt handling. - add error checks in sdw_amd_scan_controller() - remove passing "acp_lock" as platform resource for SoundWire DMA driver and PDM driver. - retrieve "acp_lock" reference from parent driver directly and use the reference in SoundWire DMA driver. - add handling for acp pci driver probe even when no ACP PDM or SoundWire manager platform devices created. - Fix indentation for acp_sdw_dma_count structure variables. - Use macro instead of hard coded values for FIFO offset and PTE offset. - Change pm_runtime enable sequence in SoundWire DMA driver probe function. - Refactor system level resume callback in SoundWire DMA driver. Vijendar Mukunda (9): ASoC: amd: ps: create platform devices based on acp config ASoC: amd: ps: handle SoundWire interrupts in acp pci driver ASoC: amd: ps: add SoundWire dma driver ASoC: amd: ps: add SoundWire dma driver dma ops ASoC: amd: ps: add support for SoundWire DMA interrupts ASoC: amd: ps: add pm ops support for SoundWire dma driver ASoC: amd: ps: enable SoundWire dma driver build ASoC: amd: update comments in Kconfig file ASoC: amd: ps: Add SoundWire specific checks in pci driver in pm ops. sound/soc/amd/Kconfig | 3 +- sound/soc/amd/ps/Makefile | 2 + sound/soc/amd/ps/acp63.h | 180 ++++++++++- sound/soc/amd/ps/pci-ps.c | 400 +++++++++++++++++++++-- sound/soc/amd/ps/ps-sdw-dma.c | 579 ++++++++++++++++++++++++++++++++++ 5 files changed, 1138 insertions(+), 26 deletions(-) create mode 100644 sound/soc/amd/ps/ps-sdw-dma.c -- 2.34.1

4 23

[PATCH v3 1/3] docs: sound: add 'pcmtest' driver documentation
by Ivan Orlov 08 Jun '23

08 Jun '23

Add documentation for the new Virtual PCM Test Driver. It covers all possible usage cases: errors and delay injections, random and pattern-based data generation, playback and ioctl redefinition functionalities testing. We have a lot of different virtual media drivers, which can be used for testing of the userspace applications and media subsystem middle layer. However, all of them are aimed at testing the video functionality and simulating the video devices. For audio devices we have only snd-dummy module, which is good in simulating the correct behavior of an ALSA device. I decided to write a tool, which would help to test the userspace ALSA programs (and the PCM middle layer as well) under unusual circumstances to figure out how they would behave. So I came up with this Virtual PCM Test Driver. This new Virtual PCM Test Driver has several features which can be useful during the userspace ALSA applications testing/fuzzing, or testing/fuzzing of the PCM middle layer. Not all of them can be implemented using the existing virtual drivers (like dummy or loopback). Here is what can this driver do: - Simulate both capture and playback processes - Check the playback stream for containing the looped pattern - Generate random or pattern-based capture data - Inject delays into the playback and capturing processes - Inject errors during the PCM callbacks Also, this driver can check the playback stream for containing the predefined pattern, which is used in the corresponding selftest to check the PCM middle layer data transferring functionality. Additionally, this driver redefines the default RESET ioctl, and the selftest covers this PCM API functionality as well. The driver supports both interleaved and non-interleaved access modes, and have separate pattern buffers for each channel. The driver supports up to 4 channels and up to 8 substreams. Signed-off-by: Ivan Orlov <ivan.orlov0322(a)gmail.com> --- V1 -> V2: - Rename the driver from from 'valsa' to 'pcmtest'. - Implement support for interleaved and non-interleaved access modes - Add support for 8 substreams and 4 channels - Extend supported formats - Extend and rewrite in C the selftest for the driver V2 -> V3: - Add separate pattern buffers for each channel - Speed up the capture data generation when using interleaved access mode - Extend the corresponding selftest to cover the multiple channels capturing and playback functionalities when using interleaved access mode. - Fix documentation issues Documentation/sound/cards/index.rst | 1 + Documentation/sound/cards/pcmtest.rst | 120 ++++++++++++++++++++++++++ 2 files changed, 121 insertions(+) create mode 100644 Documentation/sound/cards/pcmtest.rst diff --git a/Documentation/sound/cards/index.rst b/Documentation/sound/cards/index.rst index c016f8c3b88b..49c1f2f688f8 100644 --- a/Documentation/sound/cards/index.rst +++ b/Documentation/sound/cards/index.rst @@ -17,3 +17,4 @@ Card-Specific Information hdspm serial-u16550 img-spdif-in + pcmtest diff --git a/Documentation/sound/cards/pcmtest.rst b/Documentation/sound/cards/pcmtest.rst new file mode 100644 index 000000000000..e163522f3205 --- /dev/null +++ b/Documentation/sound/cards/pcmtest.rst @@ -0,0 +1,120 @@ +.. SPDX-License-Identifier: GPL-2.0 + +The Virtual PCM Test Driver +=========================== + +The Virtual PCM Test Driver emulates a generic PCM device, and can be used for +testing/fuzzing of the userspace ALSA applications, as well as for testing/fuzzing of +the PCM middle layer. Additionally, it can be used for simulating hard to reproduce +problems with PCM devices. + +What can this driver do? +~~~~~~~~~~~~~~~~~~~~~~~~ + +At this moment the driver can do the following things: + * Simulate both capture and playback processes + * Generate random or pattern-based capturing data + * Inject delays into the playback and capturing processes + * Inject errors during the PCM callbacks + +It supports up to 8 substreams and 4 channels. Also it supports both interleaved and +non-interleaved access modes. + +Also, this driver can check the playback stream for containing the predefined pattern, +which is used in the corresponding selftest (alsa/pcmtest-test.sh) to check the PCM middle +layer data transferring functionality. Additionally, this driver redefines the default +RESET ioctl, and the selftest covers this PCM API functionality as well. + +Configuration +------------- + +The driver has several parameters besides the common ALSA module parameters: + + * fill_mode (bool) - Buffer fill mode (see below) + * inject_delay (int) + * inject_hwpars_err (bool) + * inject_prepare_err (bool) + * inject_trigger_err (bool) + + +Capture Data Generation +----------------------- + +The driver has two modes of data generation: the first (0 in the fill_mode parameter) +means random data generation, the second (1 in the fill_mode) - pattern-based +data generation. Let's look at the second mode. + +First of all, you may want to specify the pattern for data generation. You can do it +by writing the pattern to the debugfs file. There are pattern buffer debugfs entries +for each channel, as well as entries which contain the pattern buffer length. + + * /sys/kernel/debug/pcmtest/fill_pattern[0-3] + * /sys/kernel/debug/pcmtest/fill_pattern[0-3]_len + +To set the pattern for the channel 0 you can execute the following command: + +.. code-block:: bash + + echo -n mycoolpattern > /sys/kernel/debug/pcmtest/fill_pattern0 + +Then, after every capture action performed on the 'pcmtest' device the buffer for the +channel 0 will contain 'mycoolpatternmycoolpatternmycoolpatternmy...'. + +The pattern itself can be up to 4096 bytes long. + +Delay injection +--------------- + +The driver has 'inject_delay' parameter, which has very self-descriptive name and +can be used for time delay/speedup simulations. The parameter has integer type, and +it means the delay added between module's internal timer ticks. + +If the 'inject_delay' value is positive, the buffer will be filled slower, if it is +negative - faster. You can try it yourself by starting a recording in any +audiorecording application (like Audacity) and selecting the 'pcmtest' device as a +source. + +This parameter can be also used for generating a huge amount of sound data in a very +short period of time (with the negative 'inject_delay' value). + +Errors injection +---------------- + +This module can be used for injecting errors into the PCM communication process. This +action can help you to figure out how the userspace ALSA program behaves under unusual +circumstances. + +For example, you can make all 'hw_params' PCM callback calls return EBUSY error by +writing '1' to the 'inject_hwpars_err' module parameter: + +.. code-block:: bash + + echo 1 > /sys/module/snd_pcmtest/parameters/inject_hwpars_err + +Errors can be injected into the following PCM callbacks: + + * hw_params (EBUSY) + * prepare (EINVAL) + * trigger (EINVAL) + +Playback test +------------- + +This driver can be also used for the playback functionality testing - every time you +write the playback data to the 'pcmtest' PCM device and close it, the driver checks the +buffer for containing the looped pattern (which is specified in the fill_pattern +debugfs file for each channel). If the playback buffer content represents the looped +pattern, 'pc_test' debugfs entry is set into '1'. Otherwise, the driver sets it to '0'. + +ioctl redefinition test +----------------------- + +The driver redefines the 'reset' ioctl, which is default for all PCM devices. To test +this functionality, we can trigger the reset ioctl and check the 'ioctl_test' debugfs +entry: + +.. code-block:: bash + + cat /sys/kernel/debug/pcmtest/ioctl_test + +If the ioctl is triggered successfully, this file will contain '1', and '0' otherwise. -- 2.34.1

3 6

[PATCH 0/4] ASoC: add new trigger ordering method
by Kuninori Morimoto 08 Jun '23

08 Jun '23

Hi Mark This patch-set adds new "trigger" starting/stopping method. Kuninori Morimoto (4): ASoC: add new trigger ordering method ASoC: amd: use use new trigger ordering method ASoC: atmel: use use new trigger ordering method ASoC: remove old trigger ordering method include/sound/soc-component.h | 11 ++- include/sound/soc.h | 23 ++++-- sound/soc/amd/acp-da7219-max98357a.c | 20 ++--- sound/soc/amd/acp-es8336.c | 2 +- sound/soc/atmel/mchp-pdmc.c | 2 +- sound/soc/soc-pcm.c | 105 ++++++++++++++------------- 6 files changed, 93 insertions(+), 70 deletions(-) -- 2.25.1

1 5

[PATCH] ASoC: codecs: wsa883x: use existing define instead of raw value
by Krzysztof Kozlowski 07 Jun '23

07 Jun '23

Use existing define for WSA883X_GLOBAL_PA_ENABLE instead of hard-coded value, just like in other places in this driver. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- sound/soc/codecs/wsa883x.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/wsa883x.c b/sound/soc/codecs/wsa883x.c index c609cb63dae6..5c1cfceb2956 100644 --- a/sound/soc/codecs/wsa883x.c +++ b/sound/soc/codecs/wsa883x.c @@ -1334,7 +1334,8 @@ static int wsa883x_digital_mute(struct snd_soc_dai *dai, int mute, int stream) WSA883X_DRE_GAIN_EN_MASK, WSA883X_DRE_GAIN_FROM_CSR); snd_soc_component_write_field(component, WSA883X_PA_FSM_CTL, - WSA883X_GLOBAL_PA_EN_MASK, 1); + WSA883X_GLOBAL_PA_EN_MASK, + WSA883X_GLOBAL_PA_ENABLE); } -- 2.34.1

2 1

[PATCH 0/3] ASoC: stm32: fix dtbs_check warnings
by Olivier Moysan 07 Jun '23

07 Jun '23

Fix dtbs_check warnings in STM32MP15 DK boards Devices Trees for STM32 I2S and Cirrus CS42L51 codec. - Add OF graph port property in I2S and CS42L51 DT bindings. Fixes warnings: audio-controller@4000b000: Unevaluated properties are not allowed ('port' was unexpected) cs42l51@4a: Unevaluated properties are not allowed ('port' was unexpected) - Correct OF graph DAI audio format property for STM32MP15x Dkx I2S node Olivier Moysan (3): ASoC: dt-bindings: stm32: document audio of graph port for i2s ASoC: dt-bindings: document audio of graph port for cs42l51 ARM: dts: stm32: fix i2s endpoint format property for stm32mp15xx-dkx Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml | 4 ++++ Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml | 4 ++++ arch/arm/boot/dts/stm32mp15xx-dkx.dtsi | 2 +- 3 files changed, 9 insertions(+), 1 deletion(-) -- 2.25.1

4 6

[PATCH] ASoC: mediatek: mt8188-mt6359: add i2c dependency
by Arnd Bergmann 07 Jun '23

07 Jun '23

From: Arnd Bergmann <arnd(a)arndb.de> The newly added driver is missing this dependency, causing a possible build failure: WARNING: unmet direct dependencies detected for SND_SOC_MAX98390 WARNING: unmet direct dependencies detected for SND_SOC_NAU8825 Depends on [m]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && I2C [=m] Selected by [y]: - SND_SOC_MT8188_MT6359 [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_MT8188 [=y] && MTK_PMIC_WRAP [=y] aarch64-linux-ld: sound/soc/codecs/max98390.o: in function `max98390_i2c_probe': max98390.c:(.text+0x514): undefined reference to `__devm_regmap_init_i2c' Fixes: 9f08dcbddeb30 ("ASoC: mediatek: mt8188-mt6359: support new board with nau88255") Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> --- sound/soc/mediatek/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/mediatek/Kconfig b/sound/soc/mediatek/Kconfig index 4ea012342b522..90db67e0ce4fb 100644 --- a/sound/soc/mediatek/Kconfig +++ b/sound/soc/mediatek/Kconfig @@ -223,6 +223,7 @@ config SND_SOC_MT8188 config SND_SOC_MT8188_MT6359 tristate "ASoC Audio driver for MT8188 with MT6359 and I2S codecs" depends on SND_SOC_MT8188 && MTK_PMIC_WRAP + depends on I2C select SND_SOC_MT6359 select SND_SOC_HDMI_CODEC select SND_SOC_DMIC -- 2.39.2

2 1

[PATCH 0/2] ASoC: Intel: HDA: two cleanups
by Pierre-Louis Bossart 07 Jun '23

07 Jun '23

One removal of a non-existent Kconfig initialization and one correction to enable SoundWire link when no HDaudio external codec is detected. This will generate more information and help resolve cases where the ACPI information is incorrect. Pierre-Louis Bossart (2): ASoC: SOF: Intel: fix SoundWire/HDaudio mutual exclusion ASoC: SOF: Intel: hda-pcm: remove kernel parameter init sound/soc/sof/intel/hda-pcm.c | 2 +- sound/soc/sof/intel/hda.c | 12 +++++++++++- 2 files changed, 12 insertions(+), 2 deletions(-) -- 2.37.2

2 3

[PATCH v2 0/9] Add support for IIO devices in ASoC
by Herve Codina 07 Jun '23

07 Jun '23

Several weeks ago, I sent a series [1] for adding a potentiometer as an auxiliary device in ASoC. The feedback was that the potentiometer should be directly handled in IIO (as other potentiometers) and something more generic should be present in ASoC in order to have a binding to import some IIO devices into sound cards. The series related to the IIO potentiometer device is already under review [2]. This series introduces audio-iio-aux. Its goal is to offer the binding between IIO and ASoC. It exposes attached IIO devices as ASoC auxiliary devices and allows to control them through mixer controls. On my system, the IIO device is a potentiometer and it is present in an amplifier design present in the audio path. Compare to the previous iteration https://lore.kernel.org/linux-kernel/20230421124122.324820-1-herve.codina@b… This v2 series mainly: - updates the binding using a simple-card subnode and handles this new subnode in the simple-card driver. - Improves existing IIO code and documentation. - Renames simple-iio-aux to audio-iio-aux and fixes the driver itself. Best regards, Hervé [1] https://lore.kernel.org/linux-kernel/20230203111422.142479-1-herve.codina@b… [2] https://lore.kernel.org/linux-kernel/20230421085245.302169-1-herve.codina@b… Changes v1 -> v2 - Patch 1 Rename simple-iio-aux to audio-iio-aux Rename invert to snd-control-invert-range Remove the /schemas/iio/iio-consumer.yaml reference Remove the unneeded '|' after description - Patch 2 (new in v2) Introduce the simple-audio-card additional-devs subnode - Patch 3 (new in v2) Check err before switch() in iio_channel_read_max() - Patch 4 (new in v2) Fix raw reads and raw writes documentation - Patch 5 (patch 2 in v1) Check err before switch() in iio_channel_read_min() Fix documentation - Patch 6 (path 3 in v1) No changes - Patch 7 (patch 4 in v1) Rename simple-iio-aux to audio-iio-aux Rename invert to snd-control-invert-range Remove the mask usage from audio_iio_aux_{get,put}_volsw helpers Use directly PTR_ERR() in dev_err_probe() parameter Remove the '!!' construction Remove of_match_ptr() - Patch 8 (new in v2) Add a missing of_node_put() in the simple-card driver - Patch 9 (new in v2) Handle additional-devs in the simple-card driver Herve Codina (9): ASoC: dt-bindings: Add audio-iio-aux ASoC: dt-bindings: simple-card: Add additional-devs subnode iio: inkern: Check error explicitly in iio_channel_read_max() iio: consumer.h: Fix raw values documentation notes iio: inkern: Add a helper to query an available minimum raw value ASoC: soc-dapm.h: Add a helper to build a DAPM widget dynamically ASoC: codecs: Add support for the generic IIO auxiliary devices ASoC: simple-card: Add missing of_node_put() in case of error ASoC: simple-card: Handle additional devices .../bindings/sound/audio-iio-aux.yaml | 64 ++++ .../bindings/sound/simple-card.yaml | 53 +++ drivers/iio/inkern.c | 75 ++++- include/linux/iio/consumer.h | 37 ++- include/sound/soc-dapm.h | 12 +- sound/soc/codecs/Kconfig | 12 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/audio-iio-aux.c | 302 ++++++++++++++++++ sound/soc/generic/simple-card.c | 53 ++- 9 files changed, 596 insertions(+), 14 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/audio-iio-aux.yaml create mode 100644 sound/soc/codecs/audio-iio-aux.c -- 2.40.1

7 37