April 2023 - Alsa-devel - mailman.alsa-project.org

[PATCH 0/4] ASoC: cs35l56: Updates for B0 silicon
by Richard Fitzgerald 18 Apr '23

18 Apr '23

These patches make some small changes to align with the B0 silicon revision. Richard Fitzgerald (4): ASoC: cs35l56: Update comment on masking of EINT20 interrupts ASoC: cs35l56: Remove SDW1 TX5 and TX6 ASoC: cs35l56: Remove SDW2RX1 mixer source ASoC: cs35l56: Rename mixer source defines for SoundWire DP1 include/sound/cs35l56.h | 10 +++------ sound/soc/codecs/cs35l56-shared.c | 34 +++---------------------------- sound/soc/codecs/cs35l56.c | 30 ++------------------------- 3 files changed, 8 insertions(+), 66 deletions(-) -- 2.30.2

2 5

[PATCH 1/4] ASoC: codecs: wcd9335: Simplify with dev_err_probe
by Krzysztof Kozlowski 18 Apr '23

18 Apr '23

Code can be a bit simpler with dev_err_probe(). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- sound/soc/codecs/wcd9335.c | 27 +++++++++++---------------- 1 file changed, 11 insertions(+), 16 deletions(-) diff --git a/sound/soc/codecs/wcd9335.c b/sound/soc/codecs/wcd9335.c index d2548fdf9ae5..8bf3510a3ea3 100644 --- a/sound/soc/codecs/wcd9335.c +++ b/sound/soc/codecs/wcd9335.c @@ -5138,20 +5138,17 @@ static int wcd9335_irq_init(struct wcd9335_codec *wcd) * INTR2 is a subset of first interrupt sources MAD, VBAT, and SVA */ wcd->intr1 = of_irq_get_byname(wcd->dev->of_node, "intr1"); - if (wcd->intr1 < 0) { - if (wcd->intr1 != -EPROBE_DEFER) - dev_err(wcd->dev, "Unable to configure IRQ\n"); - - return wcd->intr1; - } + if (wcd->intr1 < 0) + return dev_err_probe(wcd->dev, wcd->intr1, + "Unable to configure IRQ\n"); ret = devm_regmap_add_irq_chip(wcd->dev, wcd->regmap, wcd->intr1, IRQF_TRIGGER_HIGH, 0, &wcd9335_regmap_irq1_chip, &wcd->irq_data); if (ret) - dev_err(wcd->dev, "Failed to register IRQ chip: %d\n", ret); + return dev_err_probe(wcd->dev, ret, "Failed to register IRQ chip\n"); - return ret; + return 0; } static int wcd9335_slim_probe(struct slim_device *slim) @@ -5207,17 +5204,15 @@ static int wcd9335_slim_status(struct slim_device *sdev, slim_get_logical_addr(wcd->slim_ifc_dev); wcd->regmap = regmap_init_slimbus(sdev, &wcd9335_regmap_config); - if (IS_ERR(wcd->regmap)) { - dev_err(dev, "Failed to allocate slim register map\n"); - return PTR_ERR(wcd->regmap); - } + if (IS_ERR(wcd->regmap)) + return dev_err_probe(dev, PTR_ERR(wcd->regmap), + "Failed to allocate slim register map\n"); wcd->if_regmap = regmap_init_slimbus(wcd->slim_ifc_dev, &wcd9335_ifc_regmap_config); - if (IS_ERR(wcd->if_regmap)) { - dev_err(dev, "Failed to allocate ifc register map\n"); - return PTR_ERR(wcd->if_regmap); - } + if (IS_ERR(wcd->if_regmap)) + return dev_err_probe(dev, PTR_ERR(wcd->if_regmap), + "Failed to allocate ifc register map\n"); ret = wcd9335_bring_up(wcd); if (ret) { -- 2.34.1

2 13

[PATCH v2 1/4] ASoC: codecs: wcd9335: Simplify with dev_err_probe
by Krzysztof Kozlowski 18 Apr '23

18 Apr '23

Replace dev_err() in probe() path with dev_err_probe() to: 1. Make code a bit simpler and easier to read, 2. Do not print messages on deferred probe. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- Changes in v2: 1. Re-write commit msg. --- sound/soc/codecs/wcd9335.c | 27 +++++++++++---------------- 1 file changed, 11 insertions(+), 16 deletions(-) diff --git a/sound/soc/codecs/wcd9335.c b/sound/soc/codecs/wcd9335.c index d2548fdf9ae5..8bf3510a3ea3 100644 --- a/sound/soc/codecs/wcd9335.c +++ b/sound/soc/codecs/wcd9335.c @@ -5138,20 +5138,17 @@ static int wcd9335_irq_init(struct wcd9335_codec *wcd) * INTR2 is a subset of first interrupt sources MAD, VBAT, and SVA */ wcd->intr1 = of_irq_get_byname(wcd->dev->of_node, "intr1"); - if (wcd->intr1 < 0) { - if (wcd->intr1 != -EPROBE_DEFER) - dev_err(wcd->dev, "Unable to configure IRQ\n"); - - return wcd->intr1; - } + if (wcd->intr1 < 0) + return dev_err_probe(wcd->dev, wcd->intr1, + "Unable to configure IRQ\n"); ret = devm_regmap_add_irq_chip(wcd->dev, wcd->regmap, wcd->intr1, IRQF_TRIGGER_HIGH, 0, &wcd9335_regmap_irq1_chip, &wcd->irq_data); if (ret) - dev_err(wcd->dev, "Failed to register IRQ chip: %d\n", ret); + return dev_err_probe(wcd->dev, ret, "Failed to register IRQ chip\n"); - return ret; + return 0; } static int wcd9335_slim_probe(struct slim_device *slim) @@ -5207,17 +5204,15 @@ static int wcd9335_slim_status(struct slim_device *sdev, slim_get_logical_addr(wcd->slim_ifc_dev); wcd->regmap = regmap_init_slimbus(sdev, &wcd9335_regmap_config); - if (IS_ERR(wcd->regmap)) { - dev_err(dev, "Failed to allocate slim register map\n"); - return PTR_ERR(wcd->regmap); - } + if (IS_ERR(wcd->regmap)) + return dev_err_probe(dev, PTR_ERR(wcd->regmap), + "Failed to allocate slim register map\n"); wcd->if_regmap = regmap_init_slimbus(wcd->slim_ifc_dev, &wcd9335_ifc_regmap_config); - if (IS_ERR(wcd->if_regmap)) { - dev_err(dev, "Failed to allocate ifc register map\n"); - return PTR_ERR(wcd->if_regmap); - } + if (IS_ERR(wcd->if_regmap)) + return dev_err_probe(dev, PTR_ERR(wcd->if_regmap), + "Failed to allocate ifc register map\n"); ret = wcd9335_bring_up(wcd); if (ret) { -- 2.34.1

2 6

[PATCH] ASoC: nau8825: fix bounds check for adc_delay
by Tom Rix 18 Apr '23

18 Apr '23

clang build reports sound/soc/codecs/nau8825.c:2826:31: error: overlapping comparisons always evaluate to false [-Werror,-Wtautological-overlap-compare] if (nau8825->adc_delay < 125 && nau8825->adc_delay > 500) ~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~ This is a bug, a logical-or should have been used. Fixes: fc0b096c9291 ("ASoC: nau8825: Add delay control for input path") Signed-off-by: Tom Rix <trix(a)redhat.com> --- sound/soc/codecs/nau8825.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index c4389f5fe603..f4eb999761a4 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -2823,7 +2823,7 @@ static int nau8825_read_device_properties(struct device *dev, ret = device_property_read_u32(dev, "nuvoton,adc-delay-ms", &nau8825->adc_delay); if (ret) nau8825->adc_delay = 125; - if (nau8825->adc_delay < 125 && nau8825->adc_delay > 500) + if (nau8825->adc_delay < 125 || nau8825->adc_delay > 500) dev_warn(dev, "Please set the suitable delay time!\n"); nau8825->mclk = devm_clk_get(dev, "mclk"); -- 2.27.0

3 2

[PATCH] ASoC: dt-bindings: wm8737: Convert to dtschema
by Saalim Quadri 18 Apr '23

18 Apr '23

Convert the WM8737 audio CODEC bindings to DT schema Signed-off-by: Saalim Quadri <danascape(a)gmail.com> --- .../devicetree/bindings/sound/wlf,wm8737.yaml | 40 +++++++++++++++++++ .../devicetree/bindings/sound/wm8737.txt | 18 --------- 2 files changed, 40 insertions(+), 18 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/wlf,wm8737.yaml delete mode 100644 Documentation/devicetree/bindings/sound/wm8737.txt diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8737.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8737.yaml new file mode 100644 index 000000000000..12d8765726d8 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/wlf,wm8737.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/wlf,wm8737.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: WM8737 audio CODEC + +maintainers: + - patches(a)opensource.cirrus.com + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: wlf,wm8737 + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + codec@1a { + compatible = "wlf,wm8737"; + reg = <0x1a>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/wm8737.txt b/Documentation/devicetree/bindings/sound/wm8737.txt deleted file mode 100644 index eda1ec6a7563..000000000000 --- a/Documentation/devicetree/bindings/sound/wm8737.txt +++ /dev/null @@ -1,18 +0,0 @@ -WM8737 audio CODEC - -This device supports both I2C and SPI (configured with pin strapping -on the board). - -Required properties: - - - compatible : "wlf,wm8737" - - - reg : the I2C address of the device for I2C, the chip select - number for SPI. - -Example: - -wm8737: codec@1a { - compatible = "wlf,wm8737"; - reg = <0x1a>; -}; -- 2.40.0

3 2

[PATCH] ASoC: dt-bindings: wm8728: Convert to dtschema
by Saalim Quadri 18 Apr '23

18 Apr '23

Convert the WM8728 audio CODEC bindings to DT schema Signed-off-by: Saalim Quadri <danascape(a)gmail.com> --- .../devicetree/bindings/sound/wlf,wm8728.yaml | 40 +++++++++++++++++++ .../devicetree/bindings/sound/wm8728.txt | 18 --------- 2 files changed, 40 insertions(+), 18 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/wlf,wm8728.yaml delete mode 100644 Documentation/devicetree/bindings/sound/wm8728.txt diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8728.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8728.yaml new file mode 100644 index 000000000000..fc89475a051e --- /dev/null +++ b/Documentation/devicetree/bindings/sound/wlf,wm8728.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/wlf,wm8728.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: WM8728 audio CODEC + +maintainers: + - patches(a)opensource.cirrus.com + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: wlf,wm8728 + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + codec@1a { + compatible = "wlf,wm8728"; + reg = <0x1a>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/wm8728.txt b/Documentation/devicetree/bindings/sound/wm8728.txt deleted file mode 100644 index a3608b4c78b9..000000000000 --- a/Documentation/devicetree/bindings/sound/wm8728.txt +++ /dev/null @@ -1,18 +0,0 @@ -WM8728 audio CODEC - -This device supports both I2C and SPI (configured with pin strapping -on the board). - -Required properties: - - - compatible : "wlf,wm8728" - - - reg : the I2C address of the device for I2C, the chip select - number for SPI. - -Example: - -wm8728: codec@1a { - compatible = "wlf,wm8728"; - reg = <0x1a>; -}; -- 2.40.0

3 2

[PATCH 1/2] ASoC: dt-bindings: nau8825: Add delay control for input path
by David Lin 18 Apr '23

18 Apr '23

Change the original fixed delay to the assignment from property. It will make more flexible to different platforms for avoiding pop noise at the beginning of recording. Signed-off-by: David Lin <CTLIN0(a)nuvoton.com> --- Documentation/devicetree/bindings/sound/nau8825.txt | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/nau8825.txt b/Documentation/devicetree/bindings/sound/nau8825.txt index cb861aca8d40..a9c34526f4cb 100644 --- a/Documentation/devicetree/bindings/sound/nau8825.txt +++ b/Documentation/devicetree/bindings/sound/nau8825.txt @@ -74,6 +74,9 @@ Optional properties: - nuvoton,adcout-drive-strong: make the drive strength of ADCOUT IO PIN strong if set. Otherwise, the drive keeps normal strength. + - nuvoton,adc-delay-ms: Delay (in ms) to make input path stable and avoid pop noise. The + default value is 125 and range between 125 to 500 ms. + - clocks: list of phandle and clock specifier pairs according to common clock bindings for the clocks described in clock-names - clock-names: should include "mclk" for the MCLK master clock -- 2.25.1

4 8

[PATCH] ALSA: hda/hdmi: Remove some dead code
by Christophe JAILLET 18 Apr '23

18 Apr '23

These snd_BUG_ON() can never trigger, so just remove them to save a few LoC. Signed-off-by: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> --- This patch is speculative. Maybe the other "if"s should be removed and the error code returned instead. I chose to remove these ones and the corresponding error code, because it seems that it is already handled this way in hdmi_pcm_open(). I don't know the code enough, so it is only my guess. Review with care :) --- sound/pci/hda/patch_hdmi.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 5c6980394dce..ee051bdfaff6 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -2104,10 +2104,6 @@ static int generic_hdmi_playback_pcm_prepare(struct hda_pcm_stream *hinfo, goto unlock; } - if (snd_BUG_ON(pin_idx < 0)) { - err = -EINVAL; - goto unlock; - } per_pin = get_pin(spec, pin_idx); /* Verify pin:cvt selections to avoid silent audio after S3. @@ -2199,13 +2195,13 @@ static int hdmi_pcm_close(struct hda_pcm_stream *hinfo, snd_hda_spdif_ctls_unassign(codec, pcm_idx); clear_bit(pcm_idx, &spec->pcm_in_use); pin_idx = hinfo_to_pin_index(codec, hinfo); + /* + * In such a case, return 0 to match the behavior in + * hdmi_pcm_open() + */ if (pin_idx < 0) goto unlock; - if (snd_BUG_ON(pin_idx < 0)) { - err = -EINVAL; - goto unlock; - } per_pin = get_pin(spec, pin_idx); if (spec->dyn_pin_out) { -- 2.34.1

2 1

[PATCH] ASoC: dt-bindings: wm8753: Convert to dtschema
by Saalim Quadri 17 Apr '23

17 Apr '23

Convert the WM8753 audio codec bindings to DT schema. Signed-off-by: Saalim Quadri <danascape(a)gmail.com> --- .../devicetree/bindings/sound/wlf,wm8753.yaml | 62 +++++++++++++++++++ .../devicetree/bindings/sound/wm8753.txt | 40 ------------ 2 files changed, 62 insertions(+), 40 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/wlf,wm8753.yaml delete mode 100644 Documentation/devicetree/bindings/sound/wm8753.txt diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8753.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8753.yaml new file mode 100644 index 000000000000..9eebe7d7f0b7 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/wlf,wm8753.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/wlf,wm8753.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: WM8753 audio CODEC + +description: | + Pins on the device (for linking into audio routes): + * LOUT1 + * LOUT2 + * ROUT1 + * ROUT2 + * MONO1 + * MONO2 + * OUT3 + * OUT4 + * LINE1 + * LINE2 + * RXP + * RXN + * ACIN + * ACOP + * MIC1N + * MIC1 + * MIC2N + * MIC2 + * Mic Bias + +maintainers: + - patches(a)opensource.cirrus.com + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: wlf,wm8753 + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + codec@1a { + compatible = "wlf,wm8753"; + reg = <0x1a>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/wm8753.txt b/Documentation/devicetree/bindings/sound/wm8753.txt deleted file mode 100644 index eca9e5a825a9..000000000000 --- a/Documentation/devicetree/bindings/sound/wm8753.txt +++ /dev/null @@ -1,40 +0,0 @@ -WM8753 audio CODEC - -This device supports both I2C and SPI (configured with pin strapping -on the board). - -Required properties: - - - compatible : "wlf,wm8753" - - - reg : the I2C address of the device for I2C, the chip select - number for SPI. - -Pins on the device (for linking into audio routes): - - * LOUT1 - * LOUT2 - * ROUT1 - * ROUT2 - * MONO1 - * MONO2 - * OUT3 - * OUT4 - * LINE1 - * LINE2 - * RXP - * RXN - * ACIN - * ACOP - * MIC1N - * MIC1 - * MIC2N - * MIC2 - * Mic Bias - -Example: - -wm8753: codec@1a { - compatible = "wlf,wm8753"; - reg = <0x1a>; -}; -- 2.40.0

4 7

[PATCH 1/2] ASoC: fsl_mqs: move of_node_put() to the correct location
by Liliang Ye 17 Apr '23

17 Apr '23

of_node_put() should have been done directly after mqs_priv->regmap = syscon_node_to_regmap(gpr_np); otherwise it creates a reference leak on the success path. To fix this, of_node_put() is moved to the correct location, and change all the gotos to direct returns. Fixes: a9d273671440 ("ASoC: fsl_mqs: Fix error handling in probe") Signed-off-by: Liliang Ye <yll(a)hust.edu.cn> Reviewed-by: Dan Carpenter <error27(a)gmail.com> --- sound/soc/fsl/fsl_mqs.c | 15 +++++---------- 1 file changed, 5 insertions(+), 10 deletions(-) diff --git a/sound/soc/fsl/fsl_mqs.c b/sound/soc/fsl/fsl_mqs.c index 4922e6795b73..32d20d351bbf 100644 --- a/sound/soc/fsl/fsl_mqs.c +++ b/sound/soc/fsl/fsl_mqs.c @@ -210,10 +210,10 @@ static int fsl_mqs_probe(struct platform_device *pdev) } mqs_priv->regmap = syscon_node_to_regmap(gpr_np); + of_node_put(gpr_np); if (IS_ERR(mqs_priv->regmap)) { dev_err(&pdev->dev, "failed to get gpr regmap\n"); - ret = PTR_ERR(mqs_priv->regmap); - goto err_free_gpr_np; + return PTR_ERR(mqs_priv->regmap); } } else { regs = devm_platform_ioremap_resource(pdev, 0); @@ -242,8 +242,7 @@ static int fsl_mqs_probe(struct platform_device *pdev) if (IS_ERR(mqs_priv->mclk)) { dev_err(&pdev->dev, "failed to get the clock: %ld\n", PTR_ERR(mqs_priv->mclk)); - ret = PTR_ERR(mqs_priv->mclk); - goto err_free_gpr_np; + return PTR_ERR(mqs_priv->mclk); } dev_set_drvdata(&pdev->dev, mqs_priv); @@ -252,13 +251,9 @@ static int fsl_mqs_probe(struct platform_device *pdev) ret = devm_snd_soc_register_component(&pdev->dev, &soc_codec_fsl_mqs, &fsl_mqs_dai, 1); if (ret) - goto err_free_gpr_np; - return 0; - -err_free_gpr_np: - of_node_put(gpr_np); + return ret; - return ret; + return 0; } static int fsl_mqs_remove(struct platform_device *pdev) -- 2.34.1

3 2