March 2023 - Alsa-devel - mailman.alsa-project.org

[PATCH 1/3] ASoC: dt-bindings: wlf,wm8960: Convert to dtschema
by Krzysztof Kozlowski 14 Mar '23

14 Mar '23

Convert the Wolfson WM8960 audio codecs bindings to DT schema. Changes against original binding: 1. Document clocks and clock-names - already present in DTS and used by Linux driver. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- One DTS warning still remains: uniphier-pxs2-gentil.dtb: wm8960@1a: Unevaluated properties are not allowed ('port@0' was unexpected) I am not sure if this is correct usage of endpoints. I would assume the codec should be used only as DAI. --- .../devicetree/bindings/sound/wlf,wm8960.yaml | 88 +++++++++++++++++++ .../devicetree/bindings/sound/wm8960.txt | 42 --------- 2 files changed, 88 insertions(+), 42 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/wlf,wm8960.yaml delete mode 100644 Documentation/devicetree/bindings/sound/wm8960.txt diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8960.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8960.yaml new file mode 100644 index 000000000000..ee8eba7f0104 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/wlf,wm8960.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/wlf,wm8960.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Wolfson WM8960 audio codec + +maintainers: + - patches(a)opensource.cirrus.com + +properties: + compatible: + const: wlf,wm8960 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: mclk + + '#sound-dai-cells': + const: 0 + + wlf,capless: + type: boolean + description: + If present, OUT3 pin will be enabled and disabled together with HP_L and + HP_R pins in response to jack detect events. + + wlf,gpio-cfg: + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 2 + description: | + A list of GPIO configuration register values. + - gpio-cfg[0]: ALRCGPIO of R9 (Audio interface) + - gpio-cfg[1]: {GPIOPOL:GPIOSEL[2:0]} of R48 (Additional Control 4). + + wlf,hp-cfg: + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 3 + description: | + A list of headphone jack detect configuration register values: + - hp-cfg[0]: HPSEL[1:0] of R48 (Additional Control 4). + - hp-cfg[1]: {HPSWEN:HPSWPOL} of R24 (Additional Control 2). + - hp-cfg[2]: {TOCLKSEL:TOEN} of R23 (Additional Control 1). + + wlf,shared-lrclk: + type: boolean + description: + If present, the LRCM bit of R24 (Additional control 2) gets set, + indicating that ADCLRC and DACLRC pins will be disabled only when ADC + (Left and Right) and DAC (Left and Right) are disabled. + When WM8960 works on synchronize mode and DACLRC pin is used to supply + frame clock, it will no frame clock for captrue unless enable DAC to + enable DACLRC pin. If shared-lrclk is present, no need to enable DAC for + captrue. + +required: + - compatible + - reg + +allOf: + - $ref: dai-common.yaml# + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + audio-codec@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + clocks = <&clks 0>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + wlf,hp-cfg = <3 2 3>; + wlf,gpio-cfg = <1 3>; + wlf,shared-lrclk; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/wm8960.txt b/Documentation/devicetree/bindings/sound/wm8960.txt deleted file mode 100644 index 85d3b287108c..000000000000 --- a/Documentation/devicetree/bindings/sound/wm8960.txt +++ /dev/null @@ -1,42 +0,0 @@ -WM8960 audio CODEC - -This device supports I2C only. - -Required properties: - - - compatible : "wlf,wm8960" - - - reg : the I2C address of the device. - -Optional properties: - - wlf,shared-lrclk: This is a boolean property. If present, the LRCM bit of - R24 (Additional control 2) gets set, indicating that ADCLRC and DACLRC pins - will be disabled only when ADC (Left and Right) and DAC (Left and Right) - are disabled. - When wm8960 works on synchronize mode and DACLRC pin is used to supply - frame clock, it will no frame clock for captrue unless enable DAC to enable - DACLRC pin. If shared-lrclk is present, no need to enable DAC for captrue. - - - wlf,capless: This is a boolean property. If present, OUT3 pin will be - enabled and disabled together with HP_L and HP_R pins in response to jack - detect events. - - - wlf,hp-cfg: A list of headphone jack detect configuration register values. - The list must be 3 entries long. - hp-cfg[0]: HPSEL[1:0] of R48 (Additional Control 4). - hp-cfg[1]: {HPSWEN:HPSWPOL} of R24 (Additional Control 2). - hp-cfg[2]: {TOCLKSEL:TOEN} of R23 (Additional Control 1). - - - wlf,gpio-cfg: A list of GPIO configuration register values. - The list must be 2 entries long. - gpio-cfg[0]: ALRCGPIO of R9 (Audio interface) - gpio-cfg[1]: {GPIOPOL:GPIOSEL[2:0]} of R48 (Additional Control 4). - -Example: - -wm8960: codec@1a { - compatible = "wlf,wm8960"; - reg = <0x1a>; - - wlf,shared-lrclk; -}; -- 2.34.1

5 7

[PATCH v2 1/5] ASoC: cs35l45: Support for GPIO pins configuration.
by Vlad Karpovich 13 Mar '23

13 Mar '23

From: "Vlad.Karpovich" <vkarpovi(a)opensource.cirrus.com> Adds device tree configuration for cs35l45 GPIOs Signed-off-by: Vlad Karpovich <vkarpovi(a)opensource.cirrus.com> --- include/dt-bindings/sound/cs35l45.h | 57 +++++++++++++++++++++++++++++ sound/soc/codecs/cs35l45-tables.c | 14 +++++++ sound/soc/codecs/cs35l45.c | 56 ++++++++++++++++++++++++++++ sound/soc/codecs/cs35l45.h | 27 +++++++++++++- 4 files changed, 152 insertions(+), 2 deletions(-) diff --git a/include/dt-bindings/sound/cs35l45.h b/include/dt-bindings/sound/cs35l45.h index 076da4b2c28d..25386af18445 100644 --- a/include/dt-bindings/sound/cs35l45.h +++ b/include/dt-bindings/sound/cs35l45.h @@ -17,4 +17,61 @@ #define CS35L45_ASP_TX_HIZ_UNUSED 0x1 #define CS35L45_ASP_TX_HIZ_DISABLED 0x2 +/* + * Optional GPIOX Sub-nodes: + * The cs35l45 node can have up to three "cirrus,gpio-ctrlX" ('X' = [1,2,3]) + * sub-nodes for configuring the GPIO pins. + * + * - gpio-dir : GPIO pin direction. Valid only when 'gpio-ctrl' + * is 1. + * 0 = Output + * 1 = Input (Default) + * + * - gpio-lvl : GPIO level. Valid only when 'gpio-ctrl' is 1 and 'gpio-dir' is 0. + * + * 0 = Low (Default) + * 1 = High + * + * - gpio-op-cfg : GPIO output configuration. Valid only when 'gpio-ctrl' is 1 + * and 'gpio-dir' is 0. + * + * 0 = CMOS (Default) + * 1 = Open Drain + * + * - gpio-pol : GPIO output polarity select. Valid only when 'gpio-ctrl' is 1 + * and 'gpio-dir' is 0. + * + * 0 = Non-inverted, Active High (Default) + * 1 = Inverted, Active Low + * + * - gpio-invert : Defines the polarity of the GPIO pin if configured + * as input. + * + * 0 = Not inverted (Default) + * 1 = Inverted + * + * - gpio-ctrl : Defines the function of the GPIO pin. + * + * GPIO1: + * 0 = High impedance input (Default) + * 1 = Pin acts as a GPIO, direction controlled by 'gpio-dir' + * 2 = Pin acts as MDSYNC, direction controlled by MDSYNC + * 3-7 = Reserved + * + * GPIO2: + * 0 = High impedance input (Default) + * 1 = Pin acts as a GPIO, direction controlled by 'gpio-dir' + * 2 = Pin acts as open drain INT + * 3 = Reserved + * 4 = Pin acts as push-pull output INT. Active low. + * 5 = Pin acts as push-pull output INT. Active high. + * 6,7 = Reserved + * + * GPIO3: + * 0 = High impedance input (Default) + * 1 = Pin acts as a GPIO, direction controlled by 'gpio-dir' + * 2-7 = Reserved + */ +#define CS35L45_NUM_GPIOS 0x3 + #endif /* DT_CS35L45_H */ diff --git a/sound/soc/codecs/cs35l45-tables.c b/sound/soc/codecs/cs35l45-tables.c index 5a2c2e684ef9..bca7e830821f 100644 --- a/sound/soc/codecs/cs35l45-tables.c +++ b/sound/soc/codecs/cs35l45-tables.c @@ -43,6 +43,9 @@ EXPORT_SYMBOL_NS_GPL(cs35l45_apply_patch, SND_SOC_CS35L45_TABLES); static const struct reg_default cs35l45_defaults[] = { { CS35L45_BLOCK_ENABLES, 0x00003323 }, { CS35L45_BLOCK_ENABLES2, 0x00000010 }, + { CS35L45_SYNC_GPIO1, 0x00000007 }, + { CS35L45_INTB_GPIO2_MCLK_REF, 0x00000005 }, + { CS35L45_GPIO3, 0x00000005 }, { CS35L45_REFCLK_INPUT, 0x00000510 }, { CS35L45_GLOBAL_SAMPLE_RATE, 0x00000003 }, { CS35L45_ASP_ENABLES1, 0x00000000 }, @@ -61,6 +64,9 @@ static const struct reg_default cs35l45_defaults[] = { { CS35L45_ASPTX4_INPUT, 0x00000028 }, { CS35L45_ASPTX5_INPUT, 0x00000048 }, { CS35L45_AMP_PCM_CONTROL, 0x00100000 }, + { CS35L45_GPIO1_CTRL1, 0x81000001 }, + { CS35L45_GPIO2_CTRL1, 0x81000001 }, + { CS35L45_GPIO3_CTRL1, 0x81000001 }, }; static bool cs35l45_readable_reg(struct device *dev, unsigned int reg) @@ -72,6 +78,9 @@ static bool cs35l45_readable_reg(struct device *dev, unsigned int reg) case CS35L45_BLOCK_ENABLES: case CS35L45_BLOCK_ENABLES2: case CS35L45_ERROR_RELEASE: + case CS35L45_SYNC_GPIO1: + case CS35L45_INTB_GPIO2_MCLK_REF: + case CS35L45_GPIO3: case CS35L45_REFCLK_INPUT: case CS35L45_GLOBAL_SAMPLE_RATE: case CS35L45_ASP_ENABLES1: @@ -92,6 +101,10 @@ static bool cs35l45_readable_reg(struct device *dev, unsigned int reg) case CS35L45_AMP_PCM_CONTROL: case CS35L45_AMP_PCM_HPF_TST: case CS35L45_IRQ1_EINT_4: + case CS35L45_GPIO_STATUS1: + case CS35L45_GPIO1_CTRL1: + case CS35L45_GPIO2_CTRL1: + case CS35L45_GPIO3_CTRL1: return true; default: return false; @@ -107,6 +120,7 @@ static bool cs35l45_volatile_reg(struct device *dev, unsigned int reg) case CS35L45_ERROR_RELEASE: case CS35L45_AMP_PCM_HPF_TST: /* not cachable */ case CS35L45_IRQ1_EINT_4: + case CS35L45_GPIO_STATUS1: return true; default: return false; diff --git a/sound/soc/codecs/cs35l45.c b/sound/soc/codecs/cs35l45.c index d15b3b77c7eb..901f3647fbda 100644 --- a/sound/soc/codecs/cs35l45.c +++ b/sound/soc/codecs/cs35l45.c @@ -536,7 +536,63 @@ static int __maybe_unused cs35l45_runtime_resume(struct device *dev) static int cs35l45_apply_property_config(struct cs35l45_private *cs35l45) { + struct device_node *node = cs35l45->dev->of_node; + unsigned int gpio_regs[] = {CS35L45_GPIO1_CTRL1, CS35L45_GPIO2_CTRL1, + CS35L45_GPIO3_CTRL1}; + unsigned int pad_regs[] = {CS35L45_SYNC_GPIO1, + CS35L45_INTB_GPIO2_MCLK_REF, CS35L45_GPIO3}; + struct device_node *child; unsigned int val; + char of_name[32]; + int ret, i; + + if (!node) + return 0; + + for (i = 0; i < CS35L45_NUM_GPIOS; i++) { + sprintf(of_name, "cirrus,gpio-ctrl%d", i + 1); + child = of_get_child_by_name(node, of_name); + if (!child) + continue; + + ret = of_property_read_u32(child, "gpio-dir", &val); + if (!ret) + regmap_update_bits(cs35l45->regmap, gpio_regs[i], + CS35L45_GPIO_DIR_MASK, + val << CS35L45_GPIO_DIR_SHIFT); + + ret = of_property_read_u32(child, "gpio-lvl", &val); + if (!ret) + regmap_update_bits(cs35l45->regmap, gpio_regs[i], + CS35L45_GPIO_LVL_MASK, + val << CS35L45_GPIO_LVL_SHIFT); + + ret = of_property_read_u32(child, "gpio-op-cfg", &val); + if (!ret) + regmap_update_bits(cs35l45->regmap, gpio_regs[i], + CS35L45_GPIO_OP_CFG_MASK, + val << CS35L45_GPIO_OP_CFG_SHIFT); + + ret = of_property_read_u32(child, "gpio-pol", &val); + if (!ret) + regmap_update_bits(cs35l45->regmap, gpio_regs[i], + CS35L45_GPIO_POL_MASK, + val << CS35L45_GPIO_POL_SHIFT); + + ret = of_property_read_u32(child, "gpio-ctrl", &val); + if (!ret) + regmap_update_bits(cs35l45->regmap, pad_regs[i], + CS35L45_GPIO_CTRL_MASK, + val << CS35L45_GPIO_CTRL_SHIFT); + + ret = of_property_read_u32(child, "gpio-invert", &val); + if (!ret) + regmap_update_bits(cs35l45->regmap, pad_regs[i], + CS35L45_GPIO_INVERT_MASK, + val << CS35L45_GPIO_INVERT_SHIFT); + + of_node_put(child); + } if (device_property_read_u32(cs35l45->dev, "cirrus,asp-sdout-hiz-ctrl", &val) == 0) { diff --git a/sound/soc/codecs/cs35l45.h b/sound/soc/codecs/cs35l45.h index 53fe9d2b7b15..f3a54fc57d53 100644 --- a/sound/soc/codecs/cs35l45.h +++ b/sound/soc/codecs/cs35l45.h @@ -14,6 +14,7 @@ #include <linux/pm_runtime.h> #include <linux/regmap.h> #include <linux/regulator/consumer.h> +#include <dt-bindings/sound/cs35l45.h> #define CS35L45_DEVID 0x00000000 #define CS35L45_REVID 0x00000004 @@ -24,6 +25,9 @@ #define CS35L45_BLOCK_ENABLES 0x00002018 #define CS35L45_BLOCK_ENABLES2 0x0000201C #define CS35L45_ERROR_RELEASE 0x00002034 +#define CS35L45_SYNC_GPIO1 0x00002430 +#define CS35L45_INTB_GPIO2_MCLK_REF 0x00002434 +#define CS35L45_GPIO3 0x00002438 #define CS35L45_REFCLK_INPUT 0x00002C04 #define CS35L45_GLOBAL_SAMPLE_RATE 0x00002C0C #define CS35L45_BOOST_CCM_CFG 0x00003808 @@ -48,8 +52,11 @@ #define CS35L45_AMP_PCM_CONTROL 0x00007000 #define CS35L45_AMP_PCM_HPF_TST 0x00007004 #define CS35L45_IRQ1_EINT_4 0x0000E01C -#define CS35L45_LASTREG 0x0000E01C - +#define CS35L45_GPIO_STATUS1 0x0000F000 +#define CS35L45_GPIO1_CTRL1 0x0000F008 +#define CS35L45_GPIO2_CTRL1 0x0000F00C +#define CS35L45_GPIO3_CTRL1 0x0000F010 +#define CS35L45_LASTREG 0x0000F010 /* SFT_RESET */ #define CS35L45_SOFT_RESET_TRIGGER 0x5A000000 @@ -165,6 +172,22 @@ #define CS35L45_OTP_BOOT_DONE_STS_MASK BIT(1) #define CS35L45_OTP_BUSY_MASK BIT(0) +/* GPIOX_CTRL1 */ +#define CS35L45_GPIO_DIR_SHIFT 31 +#define CS35L45_GPIO_DIR_MASK BIT(31) +#define CS35L45_GPIO_LVL_SHIFT 15 +#define CS35L45_GPIO_LVL_MASK BIT(15) +#define CS35L45_GPIO_OP_CFG_SHIFT 14 +#define CS35L45_GPIO_OP_CFG_MASK BIT(14) +#define CS35L45_GPIO_POL_SHIFT 12 +#define CS35L45_GPIO_POL_MASK BIT(12) + +/* SYNC_GPIO1, INTB_GPIO2_MCLK_REF, GPIO3 */ +#define CS35L45_GPIO_CTRL_SHIFT 20 +#define CS35L45_GPIO_CTRL_MASK GENMASK(22, 20) +#define CS35L45_GPIO_INVERT_SHIFT 19 +#define CS35L45_GPIO_INVERT_MASK BIT(19) + /* Mixer sources */ #define CS35L45_PCM_SRC_MASK 0x7F #define CS35L45_PCM_SRC_ZERO 0x00 -- 2.25.1

2 9

[PATCH 1/9] ASoC: qcom: lpass-sc7280: Drop of_match_ptr for ID table
by Krzysztof Kozlowski 13 Mar '23

13 Mar '23

The driver is specific to ARCH_QCOM which depends on OF thus the driver is OF-only. Its of_device_id table is built unconditionally, thus of_match_ptr() for ID table does not make sense. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- sound/soc/qcom/lpass-sc7280.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/qcom/lpass-sc7280.c b/sound/soc/qcom/lpass-sc7280.c index d43f480cbae3..956b974e322e 100644 --- a/sound/soc/qcom/lpass-sc7280.c +++ b/sound/soc/qcom/lpass-sc7280.c @@ -443,7 +443,7 @@ MODULE_DEVICE_TABLE(of, sc7280_lpass_cpu_device_id); static struct platform_driver sc7280_lpass_cpu_platform_driver = { .driver = { .name = "sc7280-lpass-cpu", - .of_match_table = of_match_ptr(sc7280_lpass_cpu_device_id), + .of_match_table = sc7280_lpass_cpu_device_id, .pm = &sc7280_lpass_pm_ops, }, .probe = asoc_qcom_lpass_cpu_platform_probe, -- 2.34.1

2 11

[PATCH] ASoC: SOF: sof-audio: add support for setting up loopback routes
by Peter Ujfalusi 13 Mar '23

13 Mar '23

From: Chao Song <chao.song(a)linux.intel.com> During route setup, playback stream routes are setup by going through sink path, capture stream routes are set up by going through source path. This is not sufficient to handle loopback cases between pipelines configured with different directions, e.g. a sidetone or an amplifier feedback connected to a speaker protection module. So, add the logic to handle such routes between widgets that aren't in the list of DAPM widgets associated with the same PCM. Link: https://github.com/thesofproject/linux/issues/4042 Suggested-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Signed-off-by: Chao Song <chao.song(a)linux.intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)linux.intel.com> --- sound/soc/sof/sof-audio.c | 61 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 60 insertions(+), 1 deletion(-) diff --git a/sound/soc/sof/sof-audio.c b/sound/soc/sof/sof-audio.c index 6de388a8d0b8..4f12e137ff63 100644 --- a/sound/soc/sof/sof-audio.c +++ b/sound/soc/sof/sof-audio.c @@ -280,9 +280,11 @@ int sof_route_setup(struct snd_sof_dev *sdev, struct snd_soc_dapm_widget *wsourc static int sof_setup_pipeline_connections(struct snd_sof_dev *sdev, struct snd_soc_dapm_widget_list *list, int dir) { + const struct sof_ipc_tplg_ops *tplg_ops = sof_ipc_get_ops(sdev, tplg); struct snd_soc_dapm_widget *widget; + struct snd_sof_route *sroute; struct snd_soc_dapm_path *p; - int ret; + int ret = 0; int i; /* @@ -325,6 +327,63 @@ static int sof_setup_pipeline_connections(struct snd_sof_dev *sdev, } } + /* + * The above loop handles connections between widgets that belong to the DAPM widget list. + * This is not sufficient to handle loopback cases between pipelines configured with + * different directions, e.g. a sidetone or an amplifier feedback connected to a speaker + * protection module. + */ + list_for_each_entry(sroute, &sdev->route_list, list) { + bool src_widget_in_dapm_list, sink_widget_in_dapm_list; + struct snd_sof_widget *swidget; + + if (sroute->setup) + continue; + + src_widget_in_dapm_list = widget_in_list(list, sroute->src_widget->widget); + sink_widget_in_dapm_list = widget_in_list(list, sroute->sink_widget->widget); + + /* + * if both source and sink are in the DAPM list, the route must already have been + * set up above. And if neither are in the DAPM list, the route shouldn't be + * handled now. + */ + if (src_widget_in_dapm_list == sink_widget_in_dapm_list) + continue; + + /* + * At this point either the source widget or the sink widget is in the DAPM list + * with a route that might need to be set up. Check the use_count of the widget + * that is not in the DAPM list to confirm if it is in use currently before setting + * up the route. + */ + if (src_widget_in_dapm_list) + swidget = sroute->sink_widget; + else + swidget = sroute->src_widget; + + mutex_lock(&swidget->setup_mutex); + if (!swidget->use_count) { + mutex_unlock(&swidget->setup_mutex); + continue; + } + + if (tplg_ops && tplg_ops->route_setup) { + /* + * this route will get freed when either the source widget or the sink + * widget is freed during hw_free + */ + ret = tplg_ops->route_setup(sdev, sroute); + if (!ret) + sroute->setup = true; + } + + mutex_unlock(&swidget->setup_mutex); + + if (ret < 0) + return ret; + } + return 0; } -- 2.39.2

2 1

[PATCH] ASoC: SMA1303: set sma_i2c_regmap storage-class-specifier to static
by Tom Rix 13 Mar '23

13 Mar '23

smatch reports sound/soc/codecs/sma1303.c:1594:28: warning: symbol 'sma_i2c_regmap' was not declared. Should it be static? sma_i2c_regmap is only used in sma1303, so it should be static Signed-off-by: Tom Rix <trix(a)redhat.com> --- sound/soc/codecs/sma1303.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/sma1303.c b/sound/soc/codecs/sma1303.c index fa4b0a60f8a9..b6c132edf3bd 100644 --- a/sound/soc/codecs/sma1303.c +++ b/sound/soc/codecs/sma1303.c @@ -1591,7 +1591,7 @@ static const struct snd_soc_component_driver sma1303_component = { .num_dapm_routes = ARRAY_SIZE(sma1303_audio_map), }; -const struct regmap_config sma_i2c_regmap = { +static const struct regmap_config sma_i2c_regmap = { .reg_bits = 8, .val_bits = 8, -- 2.27.0

2 1

[PATCH 0/4] ASoC: mediatek: fix coverity problems
by Trevor Wu 13 Mar '23

13 Mar '23

Coverity reports some UNINIT and CERT STR31-C problems, so we add initialization and dai id check to resolve problems. Trevor Wu (4): ASoC: mediatek: mt8195: add dai id check before accessing array ASoC: mediatek: mt9195-mt6359: fix UNINIT problem ASoC: mediatek: mt6358: fix UNINIT problem ASoC: mediatek: mt6359: fix UNINIT problem sound/soc/codecs/mt6358.c | 2 +- sound/soc/codecs/mt6359.c | 2 +- sound/soc/mediatek/mt8195/mt8195-dai-adda.c | 17 +- sound/soc/mediatek/mt8195/mt8195-dai-etdm.c | 177 +++++++++++++++++--- sound/soc/mediatek/mt8195/mt8195-dai-pcm.c | 26 ++- sound/soc/mediatek/mt8195/mt8195-mt6359.c | 2 +- 6 files changed, 188 insertions(+), 38 deletions(-) -- 2.18.0

2 5

[PATCH V5 00/15] spi: Add support for stacked/parallel memories
by Amit Kumar Mahapatra 13 Mar '23

13 Mar '23

This patch is in the continuation to the discussions which happened on 'commit f89504300e94 ("spi: Stacked/parallel memories bindings")' for adding dt-binding support for stacked/parallel memories. This patch series updated the spi-nor, spi core and the spi drivers to add stacked and parallel memories support. The first patch https://lore.kernel.org/all/20230119185342.2093323-1-amit.kumar-mahapatra@a… of the previous series got applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next But the rest of the patches in the series did not get applied due to merge conflict, so send the remaining patches in the series after rebasing it on top of for-next branch. --- BRANCH: for-next Changes in v5: - Rebased the patches on top of v6.3-rc1 and fixed the merge conflicts. - Fixed compilation warnings in spi-sh-msiof.c with shmobile_defconfig Changes in v4: - Fixed build error in spi-pl022.c file - reported by Mark. - Fixed build error in spi-sn-f-ospi.c file. - Added Reviewed-by: Serge Semin <fancer.lancer(a)gmail.com> tag. - Added two more patches to replace spi->chip_select with API calls in mpc832x_rdb.c & cs35l41_hda_spi.c files. Changes in v3: - Rebased the patches on top of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next - Added a patch to convert spi_nor_otp_region_len(nor) & spi_nor_otp_n_regions(nor) macros into inline functions - Added Reviewed-by & Acked-by tags Changes in v2: - Rebased the patches on top of v6.2-rc1 - Created separate patch to add get & set APIs for spi->chip_select & spi->cs_gpiod, and replaced all spi->chip_select and spi->cs_gpiod references with the API calls. - Created separate patch to add get & set APIs for nor->params. --- Amit Kumar Mahapatra (15): spi: Replace all spi->chip_select and spi->cs_gpiod references with function call net: Replace all spi->chip_select and spi->cs_gpiod references with function call iio: imu: Replace all spi->chip_select and spi->cs_gpiod references with function call mtd: devices: Replace all spi->chip_select and spi->cs_gpiod references with function call staging: Replace all spi->chip_select and spi->cs_gpiod references with function call platform/x86: serial-multi-instantiate: Replace all spi->chip_select and spi->cs_gpiod references with function call powerpc/83xx/mpc832x_rdb: Replace all spi->chip_select references with function call ALSA: hda: cs35l41: Replace all spi->chip_select references with function call spi: Add stacked and parallel memories support in SPI core mtd: spi-nor: Convert macros with inline functions mtd: spi-nor: Add APIs to set/get nor->params mtd: spi-nor: Add stacked memories support in spi-nor spi: spi-zynqmp-gqspi: Add stacked memories support in GQSPI driver mtd: spi-nor: Add parallel memories support in spi-nor spi: spi-zynqmp-gqspi: Add parallel memories support in GQSPI driver arch/powerpc/platforms/83xx/mpc832x_rdb.c | 2 +- drivers/iio/imu/adis16400.c | 2 +- drivers/mtd/devices/mtd_dataflash.c | 2 +- drivers/mtd/spi-nor/atmel.c | 17 +- drivers/mtd/spi-nor/core.c | 665 +++++++++++++++--- drivers/mtd/spi-nor/core.h | 8 + drivers/mtd/spi-nor/debugfs.c | 4 +- drivers/mtd/spi-nor/gigadevice.c | 4 +- drivers/mtd/spi-nor/issi.c | 11 +- drivers/mtd/spi-nor/macronix.c | 6 +- drivers/mtd/spi-nor/micron-st.c | 39 +- drivers/mtd/spi-nor/otp.c | 48 +- drivers/mtd/spi-nor/sfdp.c | 29 +- drivers/mtd/spi-nor/spansion.c | 50 +- drivers/mtd/spi-nor/sst.c | 7 +- drivers/mtd/spi-nor/swp.c | 22 +- drivers/mtd/spi-nor/winbond.c | 10 +- drivers/mtd/spi-nor/xilinx.c | 18 +- drivers/net/ethernet/adi/adin1110.c | 2 +- drivers/net/ethernet/asix/ax88796c_main.c | 2 +- drivers/net/ethernet/davicom/dm9051.c | 2 +- drivers/net/ethernet/qualcomm/qca_debug.c | 2 +- drivers/net/ieee802154/ca8210.c | 2 +- drivers/net/wan/slic_ds26522.c | 2 +- .../net/wireless/marvell/libertas/if_spi.c | 2 +- drivers/net/wireless/silabs/wfx/bus_spi.c | 2 +- drivers/net/wireless/st/cw1200/cw1200_spi.c | 2 +- .../platform/x86/serial-multi-instantiate.c | 3 +- drivers/spi/spi-altera-core.c | 2 +- drivers/spi/spi-amd.c | 4 +- drivers/spi/spi-ar934x.c | 2 +- drivers/spi/spi-armada-3700.c | 4 +- drivers/spi/spi-aspeed-smc.c | 13 +- drivers/spi/spi-at91-usart.c | 2 +- drivers/spi/spi-ath79.c | 4 +- drivers/spi/spi-atmel.c | 26 +- drivers/spi/spi-au1550.c | 4 +- drivers/spi/spi-axi-spi-engine.c | 2 +- drivers/spi/spi-bcm-qspi.c | 10 +- drivers/spi/spi-bcm2835.c | 19 +- drivers/spi/spi-bcm2835aux.c | 4 +- drivers/spi/spi-bcm63xx-hsspi.c | 30 +- drivers/spi/spi-bcm63xx.c | 2 +- drivers/spi/spi-bcmbca-hsspi.c | 30 +- drivers/spi/spi-cadence-quadspi.c | 5 +- drivers/spi/spi-cadence-xspi.c | 4 +- drivers/spi/spi-cadence.c | 4 +- drivers/spi/spi-cavium.c | 8 +- drivers/spi/spi-coldfire-qspi.c | 8 +- drivers/spi/spi-davinci.c | 18 +- drivers/spi/spi-dln2.c | 6 +- drivers/spi/spi-dw-core.c | 2 +- drivers/spi/spi-dw-mmio.c | 4 +- drivers/spi/spi-falcon.c | 2 +- drivers/spi/spi-fsi.c | 2 +- drivers/spi/spi-fsl-dspi.c | 16 +- drivers/spi/spi-fsl-espi.c | 6 +- drivers/spi/spi-fsl-lpspi.c | 2 +- drivers/spi/spi-fsl-qspi.c | 6 +- drivers/spi/spi-fsl-spi.c | 2 +- drivers/spi/spi-geni-qcom.c | 6 +- drivers/spi/spi-gpio.c | 4 +- drivers/spi/spi-gxp.c | 4 +- drivers/spi/spi-hisi-sfc-v3xx.c | 2 +- drivers/spi/spi-img-spfi.c | 14 +- drivers/spi/spi-imx.c | 30 +- drivers/spi/spi-ingenic.c | 4 +- drivers/spi/spi-intel.c | 2 +- drivers/spi/spi-jcore.c | 4 +- drivers/spi/spi-lantiq-ssc.c | 6 +- drivers/spi/spi-mem.c | 4 +- drivers/spi/spi-meson-spicc.c | 2 +- drivers/spi/spi-microchip-core.c | 6 +- drivers/spi/spi-mpc512x-psc.c | 8 +- drivers/spi/spi-mpc52xx.c | 2 +- drivers/spi/spi-mt65xx.c | 6 +- drivers/spi/spi-mt7621.c | 2 +- drivers/spi/spi-mux.c | 8 +- drivers/spi/spi-mxic.c | 10 +- drivers/spi/spi-mxs.c | 2 +- drivers/spi/spi-npcm-fiu.c | 20 +- drivers/spi/spi-nxp-fspi.c | 10 +- drivers/spi/spi-omap-100k.c | 2 +- drivers/spi/spi-omap-uwire.c | 8 +- drivers/spi/spi-omap2-mcspi.c | 24 +- drivers/spi/spi-orion.c | 4 +- drivers/spi/spi-pci1xxxx.c | 4 +- drivers/spi/spi-pic32-sqi.c | 2 +- drivers/spi/spi-pic32.c | 4 +- drivers/spi/spi-pl022.c | 4 +- drivers/spi/spi-pxa2xx.c | 6 +- drivers/spi/spi-qcom-qspi.c | 2 +- drivers/spi/spi-rb4xx.c | 2 +- drivers/spi/spi-rockchip-sfc.c | 2 +- drivers/spi/spi-rockchip.c | 26 +- drivers/spi/spi-rspi.c | 10 +- drivers/spi/spi-s3c64xx.c | 2 +- drivers/spi/spi-sc18is602.c | 4 +- drivers/spi/spi-sh-msiof.c | 6 +- drivers/spi/spi-sh-sci.c | 2 +- drivers/spi/spi-sifive.c | 6 +- drivers/spi/spi-sn-f-ospi.c | 2 +- drivers/spi/spi-st-ssc4.c | 2 +- drivers/spi/spi-stm32-qspi.c | 12 +- drivers/spi/spi-sun4i.c | 2 +- drivers/spi/spi-sun6i.c | 2 +- drivers/spi/spi-synquacer.c | 6 +- drivers/spi/spi-tegra114.c | 28 +- drivers/spi/spi-tegra20-sflash.c | 2 +- drivers/spi/spi-tegra20-slink.c | 6 +- drivers/spi/spi-tegra210-quad.c | 8 +- drivers/spi/spi-ti-qspi.c | 16 +- drivers/spi/spi-topcliff-pch.c | 4 +- drivers/spi/spi-wpcm-fiu.c | 12 +- drivers/spi/spi-xcomm.c | 2 +- drivers/spi/spi-xilinx.c | 6 +- drivers/spi/spi-xlp.c | 4 +- drivers/spi/spi-zynq-qspi.c | 2 +- drivers/spi/spi-zynqmp-gqspi.c | 58 +- drivers/spi/spi.c | 213 ++++-- drivers/spi/spidev.c | 6 +- drivers/staging/fbtft/fbtft-core.c | 2 +- drivers/staging/greybus/spilib.c | 2 +- include/linux/mtd/spi-nor.h | 18 +- include/linux/spi/spi.h | 34 +- include/trace/events/spi.h | 10 +- sound/pci/hda/cs35l41_hda_spi.c | 2 +- 127 files changed, 1342 insertions(+), 613 deletions(-) -- 2.25.1

4 20

[PATCH v2 0/8] ASoC: Initial support for Cirrus Logic CS35L56
by Richard Fitzgerald 13 Mar '23

13 Mar '23

The CS35L56 is a high-performance boosted mono audio amplifier. Supported control interfaces are I2C, SPI or SoundWire. Supported audio interfaces are I2S/TDM or SoundWire. The CS35L56 has a self-booting firmware in ROM, with the ability to patch the firmware and/or apply tunings. Patches #1 to #7 add support to cs_dsp and wm_adsp for self-booting firmware and the ability to apply a .bin file without having to apply a .wmfw. Changes since v1: - Check for error when getting pm_runtime in cs35l56_irq(). - Use SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK instead of the old define. - Re-word two comments in cs35l56-sdw.c. - Add an comment explaining the wait for init_completion in cs35l56_dsp_work(). - Omit patches to Intel machine driver. These will be done as a separate thread. Richard Fitzgerald (1): ASoC: cs35l56: Add driver for Cirrus Logic CS35L56 Simon Trimmer (7): firmware: cs_dsp: Introduce no_core_startstop for self-booting DSPs ASoC: wm_adsp: Use no_core_startstop to prevent creating preload control firmware: cs_dsp: Support DSPs that don't require firmware download ASoC: wm_adsp: Support DSPs that don't require firmware download ASoC: wm_adsp: Expose the DSP boot work actions as wm_adsp_power_up() ASoC: wm_adsp: Add support for loading bin files without wmfw ASoC: wm_adsp: Simplify the logging of requested firmware files MAINTAINERS | 1 + drivers/firmware/cirrus/cs_dsp.c | 17 +- include/linux/firmware/cirrus/cs_dsp.h | 1 + include/sound/cs35l56.h | 266 +++++ sound/soc/codecs/Kconfig | 34 + sound/soc/codecs/Makefile | 10 + sound/soc/codecs/cs35l56-i2c.c | 83 ++ sound/soc/codecs/cs35l56-sdw.c | 528 +++++++++ sound/soc/codecs/cs35l56-shared.c | 390 +++++++ sound/soc/codecs/cs35l56-spi.c | 81 ++ sound/soc/codecs/cs35l56.c | 1461 ++++++++++++++++++++++++ sound/soc/codecs/cs35l56.h | 77 ++ sound/soc/codecs/wm_adsp.c | 63 +- sound/soc/codecs/wm_adsp.h | 3 + 14 files changed, 2999 insertions(+), 16 deletions(-) create mode 100644 include/sound/cs35l56.h create mode 100644 sound/soc/codecs/cs35l56-i2c.c create mode 100644 sound/soc/codecs/cs35l56-sdw.c create mode 100644 sound/soc/codecs/cs35l56-shared.c create mode 100644 sound/soc/codecs/cs35l56-spi.c create mode 100644 sound/soc/codecs/cs35l56.c create mode 100644 sound/soc/codecs/cs35l56.h -- 2.30.2

1 8

topology: pre-processor: fix regular expression flags
by GitHub pull_request - opened 13 Mar '23

13 Mar '23

alsa-project/alsa-utils pull request #195 was opened from aiChaoSONG: The REG_ICASE flag is a compile-time flag (cflags), it should be used with regcomp() instead of regexec(). Also add the REG_EXTENDED flag in this patch to make patterns like 'tgl|adl' work. Request URL : https://github.com/alsa-project/alsa-utils/pull/195 Patch URL : https://github.com/alsa-project/alsa-utils/pull/195.patch Repository URL: https://github.com/alsa-project/alsa-utils

1 0

ALC4080 on MSI MPG Z590 Gaming Force (0db0:8af7)
by GitHub issues - opened 13 Mar '23

13 Mar '23

alsa-project/alsa-ucm-conf issue #290 was opened from Paris17: I have a MSI MPG Z590 GAMING FORCE motherboard with ALC4080. Front panel audio doesn't work in any Linux distribution I've tried. But adding in "USB-Audio.conf" the device ID number (0db0:8af7) to the command for "Define.ProfileName" works in Arch, OpenSuse, Manjaro and EndeavourOS. It doesn't work in Fedora and Clear Linux though. Please add audio support for this motherboard in USB-Audio.conf. Thank you. USB ID: 0db0:8af7 $ lsusb | grep 0db0 Bus 001 Device 003: ID 0db0:8af7 Micro Star International USB Audio Here is my alsa-info output: http://alsa-project.org/db/?f=a5339b54ab51163373c77dc45c267bfba2507531 Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/290 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0