December 2023 - Alsa-devel - mailman.alsa-project.org

[PATCHv3 00/10] ASoC: fsl-asoc-card: compatibility integration of a generic codec use case for use with S/PDIF controller
by Elinor Montmasson 19 Dec '23

19 Dec '23

Hello, This is the v3 of the series of patch aiming to make the machine driver "fsl-asoc-card" compatible with use cases where there is no real codec driver. It proposes to use the "spdif_receiver" and "spdif_transmitter" drivers instead of the dummy codec. This is a first step in using the S/PDIF controller with the ASRC. The five first patches add compatibility with the pair of codecs "spdif_receiver" and "spdif_transmitter" with a new compatible, "fsl,imx-audio-generic". Codec parameters are set with default values. Consequently, the driver is modified to work with multi-codec use cases. It can get 2 codecs phandles from the device tree, and the "fsl_asoc_card_priv" struct now has 2 "codec_priv" to store properties of both codecs. It is fixed to 2 codecs as only "fsl,imx-audio-generic" uses multiple codecs at the moment. However, the driver now uses for_each_codecs macros when possible to ease future implementations of multi-codec configurations. The remaining patches add configuration options for the device tree. They configure the CPU DAI when using "fsl,imx-audio-generic". These options are usually hard-coded in "fsl-asoc-card.c" for each audio codec. Because the generic codec could be used with other CPU DAIs than the S/PDIF controller, setting these parameters could be required. This series of patch was successfully built for arm64 and x86 on top of the latest for-next branch of the ASoC git tree on the 14th of December. These modifications have also been tested on an i.MX8MN evaluation board, with a linux kernel RT v6.1.26-rt8. Best regards, Elinor Montmasson Changelog: v2 -> v3: * when the bitmaster or framemaster are retrieved from the device tree, the driver will now compare them with the two codecs possibly given in the device tree, and not just the first codec. * improve driver modifications to use multiple codecs for better integration of future multi-codec use cases: * use for_each_codec macros when possible. * "fsl_asoc_card_priv" struct now has 2 "codec_priv" as the driver can currently retrieve 2 codec phandles from the device tree. * fix subject of patch 10/10 to follow the style of the subsystem and previous commits of the file. * v2 patch series at: https://lore.kernel.org/alsa-devel/20231027144734.3654829-1-elinor.montmass… v1 -> v2: * replace use of the dummy codec by the pair of codecs "spdif_receiver" / " spdif_transmitter". * adapt how dai links codecs are used to take into account the possibility for multiple codecs per link. * change compatible name. * adapt driver to be able to register two codecs given in the device tree. * v1 patch series at: https://lore.kernel.org/alsa-devel/20230901144550.520072-1-elinor.montmasso… Elinor Montmasson (10): ASoC: fsl-asoc-card: add support for dai links with multiple codecs ASoC: fsl-asoc-card: add second dai link component for codecs ASoC: fsl-asoc-card: add compatibility to use 2 codecs in dai-links ASoC: fsl-asoc-card: add new compatible for a generic codec use case ASoC: fsl-asoc-card: set generic codec as clock provider ASoC: fsl-asoc-card: add dts property "cpu-slot-width" ASoC: fsl-asoc-card: add dts property "cpu-slot-num" ASoC: fsl-asoc-card: add dts properties "cpu-sysclk-freq" ASoC: fsl-asoc-card: add dts properties "cpu-sysclk-dir-out" ASoC: bindings: fsl-asoc-card: add compatible for generic codec .../bindings/sound/fsl-asoc-card.txt | 28 +- sound/soc/fsl/fsl-asoc-card.c | 299 +++++++++++------- 2 files changed, 218 insertions(+), 109 deletions(-) -- 2.25.1

3 15

[PATCH v10 00/41] Introduce QC USB SND audio offloading support
by Wesley Cheng 19 Dec '23

19 Dec '23

Several Qualcomm based chipsets can support USB audio offloading to a dedicated audio DSP, which can take over issuing transfers to the USB host controller. The intention is to reduce the load on the main processors in the SoC, and allow them to be placed into lower power modes. There are several parts to this design: 1. Adding ASoC binding layer 2. Create a USB backend for Q6DSP 3. Introduce XHCI interrupter support 4. Create vendor ops for the USB SND driver USB | ASoC -------------------------------------------------------------------- | _________________________ | |sm8250 platform card | | |_________________________| | | | | ___V____ ____V____ | |Q6USB | |Q6AFE | | |"codec" | |"cpu" | | |________| |_________| | ^ ^ ^ | | |________| | ___V____ | | |SOC-USB | | ________ ________ | | | |USB SND |<--->|QC offld|<------------>|________| | |(card.c)| | |<---------- | |________| |________|___ | | | ^ ^ | | | ____________V_________ | | | | | |APR/GLINK | __ V_______________V_____ | | | |______________________| |USB SND (endpoint.c) | | | | ^ |_________________________| | | | | ^ | | | ___________V___________ | | | |->|audio DSP | ___________V_____________ | | |_______________________| |XHCI HCD |<- | |_________________________| | Adding ASoC binding layer: soc-usb: Intention is to treat a USB port similar to a headphone jack. The port is always present on the device, but cable/pin status can be enabled/disabled. Expose mechanisms for USB backend ASoC drivers to communicate with USB SND. Create a USB backend for Q6DSP: q6usb: Basic backend driver that will be responsible for maintaining the resources needed to initiate a playback stream using the Q6DSP. Will be the entity that checks to make sure the connected USB audio device supports the requested PCM format. If it does not, the PCM open call will fail, and userpsace ALSA can take action accordingly. Introduce XHCI interrupter support: XHCI HCD supports multiple interrupters, which allows for events to be routed to different event rings. This is determined by "Interrupter Target" field specified in Section "6.4.1.1 Normal TRB" of the XHCI specification. Events in the offloading case will be routed to an event ring that is assigned to the audio DSP. Create vendor ops for the USB SND driver: qc_audio_offload: This particular driver has several components associated with it: - QMI stream request handler - XHCI interrupter and resource management - audio DSP memory management When the audio DSP wants to enable a playback stream, the request is first received by the ASoC platform sound card. Depending on the selected route, ASoC will bring up the individual DAIs in the path. The Q6USB backend DAI will send an AFE port start command (with enabling the USB playback path), and the audio DSP will handle the request accordingly. Part of the AFE USB port start handling will have an exchange of control messages using the QMI protocol. The qc_audio_offload driver will populate the buffer information: - Event ring base address - EP transfer ring base address and pass it along to the audio DSP. All endpoint management will now be handed over to the DSP, and the main processor is not involved in transfers. Overall, implementing this feature will still expose separate sound card and PCM devices for both the platorm card and USB audio device: 0 [SM8250MTPWCD938]: sm8250 - SM8250-MTP-WCD9380-WSA8810-VA-D SM8250-MTP-WCD9380-WSA8810-VA-DMIC 1 [Audio ]: USB-Audio - USB Audio Generic USB Audio at usb-xhci-hcd.1.auto-1.4, high speed This is to ensure that userspace ALSA entities can decide which route to take when executing the audio playback. In the above, if card#1 is selected, then USB audio data will take the legacy path over the USB PCM drivers, etc... This feature was validated using: - tinymix: set/enable the multimedia path to route to USB backend - tinyplay: issue playback on platform card Changelog -------------------------------------------- Changes in v10: - Added new mixer for exposing kcontrol for sound card created by USB SND. This allows for applications to know which platform sound card has offload support. Will return the card number. - Broke down and cleaned up some functions/APIs within qc_audio_offload driver. - Exported xhci_initialize_ring_info(), and modified XHCI makefile to allow for the XHCI sideband to exist as a module. - Reworked the jack registration and moved it to the QCOM platform card driver, ie sm8250. - Added an SOC USB API to fetch a standard component tag that can be appended to the platform sound card. Added this tag to sm8250 if any USB path exists within the DT node. - Moved kcontrols that existed in the Q6USB driver, and made it a bit more generic, so that naming can be standardized across solutions. SOC USB is now responsible for creation of these kcontrols. - Added a SOC USB RST document explaining some code flows and implementation details so that other vendors can utilize the framework. - Addressed a case where USB device connection events are lost if usb offload driver (qc_audio_offload) is not probed when everything else has been initialized, ie USB SND, SOC USB and ASoC sound card. Add a rediscover device call during module init, to ensure that connection events will be propagated. - Rebased to usb-next. Changes in v9: - Fixed the dt binding check issue with regards to num-hc-interrupters. Changes in v8: - Cleaned up snd_soc_usb_find_priv_data() based on Mark's feedback. Removed some of the duplicate looping code that was present on previous patches. Also renamed the API. - Integrated Mathias' suggestions on his new sideband changes: https://git.kernel.org/pub/scm/linux/kernel/git/mnyman/xhci.git/log/?h=feat… - Addressed some of Mathias' fixme tags, such as: - Resetting transfer ring dequeue/enqueue pointers - Issuing stop endpoint command during ep removal - Reset ERDP properly to first segment ring during interrupter removal. (this is currently just being cleared to 0, but should be pointing to a valid segment if controller is still running. Changes in v7: - Fixed dt check error for q6usb bindings - Updated q6usb property from qcom,usb-audio-intr-num --> qcom,usb-audio-intr-idx - Removed separate DWC3 HC interrupters num property, and place limits to XHCI one. - Modified xhci_ring_to_sgtable() to use assigned IOVA/DMA address to fetch pages, as it is not ensured event ring allocated is always done in the vmalloc range. Changes in v6: - Fixed limits and description on several DT bindings (XHCI and Q6USB) - Fixed patch subjects to follow other ALSA/ASoC notations. USB SND - Addressed devices which expose multiple audio (UAC) interfaces. These devices will create a single USB sound card with multiple audio streams, and receive multiple interface probe routines. QC offload was not properly considering cases with multiple probe calls. - Renamed offload module name and kconfig to fit within the SND domain. - Renamed attach/detach endpoint API to keep the hw_params notation. Changes in v5: - Removed some unnescessary files that were included - Fixed some typos mentioned - Addressed dt-binding issues and added hc-interrupters definition to usb-xhci.yaml XHCI: - Moved secondary skip events API to xhci-ring and updated implementation - Utilized existing XHCI APIs, such as inc_deq and xhci_update_erst_dequeue() USB SND - Renamed and reworked the APIs in "sound: usb: Export USB SND APIs for modules" patch to include suggestions to utilize snd_usb_hw_params/free and to avoid generic naming. - Added a resume_cb() op for completion sake. - Addressed some locking concerns with regards to when registering for platform hooks. - Added routine to disconnect all offloaded devices during module unbind. ASoC - Replaced individual PCM parameter arguments in snd_soc_usb_connect() with new snd_soc_usb_device structure to pass along PCM info. - Modified snd_jack set report to notify HEADPHONE event, as we do not support record path. Changes in v4: - Rebased to xhci/for-usb-next - Addressed some dt-bindings comments XHCI: - Pulled in latest changes from Mathias' feature_interrupters branch: https://git.kernel.org/pub/scm/linux/kernel/git/mnyman/xhci.git/log/?h=feat… - Fixed commit text and signage for the XHCI sideband/interrupter related changes - Added some logic to address the FIXME tags mentioned throughout the commits, such as handling multi segment rings and building the SGT, locking concerns, and ep cleanup operations. - Removed some fixme tags for conditions that may not be needed/addressed. - Repurposed the new endpoint stop sync API to be utilized in other places. - Fixed potential compile issue if XHCI sideband config is not defined. ASoC: - Added sound jack control into the Q6USB driver. Allows for userpsace to know when an offload capable device is connected. USB SND: - Avoided exporting _snd_pcm_hw_param_set based on Takashi's recommendation. - Split USB QMI packet header definitions into a separate commit. This is used to properly allow the QMI interface driver to parse and route QMI packets accordingly - Added a "depends on" entry when enabling QC audio offload to avoid compile time issues. Changes in v3: - Changed prefix from RFC to PATCH - Rebased entire series to usb-next - Updated copyright years XHCI: - Rebased changes on top of XHCI changes merged into usb-next, and only added changes that were still under discussion. - Added change to read in the "num-hc-interrupters" device property. ASoC: - qusb6 USB backend - Incorporated suggestions to fetch iommu information with existing APIs - Added two new sound kcontrols to fetch offload status and offload device selection. - offload status - will return the card and pcm device in use tinymix -D 0 get 1 --> 1, 0 (offload in progress on card#1 pcm#0) - device selection - set the card and pcm device to enable offload on. Ex.: tinymix -D 0 set 1 2 0 --> sets offload on card#2 pcm#0 (this should be the USB card) USB SND: - Fixed up some locking related concerns for registering platform ops. - Moved callbacks under the register_mutex, so that - Modified APIs to properly pass more information about the USB SND device, so that the Q6USB backend can build a device list/map, in order to monitor offload status and device selection. Changes in v2: XHCI: - Replaced XHCI and HCD changes with Mathias' XHCI interrupter changes in his tree: https://git.kernel.org/pub/scm/linux/kernel/git/mnyman/xhci.git/log/?h=feat… Adjustments made to Mathias' changes: - Created xhci-intr.h to export/expose interrupter APIs versus exposing xhci.h. Moved dependent structures to this file as well. (so clients can parse out information from "struct xhci_interrupter") - Added some basic locking when requesting interrupters. - Fixed up some sanity checks. - Removed clearing of the ERSTBA during freeing of the interrupter. (pending issue where SMMU fault occurs if DMA addr returned is 64b - TODO) - Clean up pending events in the XHCI secondary interrupter. While testing USB bus suspend, it was seen that on bus resume, the xHCI HC would run into a command timeout. - Added offloading APIs to xHCI to fetch transfer and event ring information. ASoC: - Modified soc-usb to allow for multiple USB port additions. For this to work, the USB offload driver has to have a reference to the USB backend by adding a "usb-soc-be" DT entry to the device saved into XHCI sysdev. - Created separate dt-bindings for defining USB_RX port. - Increased APR timeout to accommodate the situation where the AFE port start command could be delayed due to having to issue a USB bus resume while handling the QMI stream start command. USB SND: - Added a platform ops during usb_audio_suspend(). This allows for the USB offload driver to halt the audio stream when system enters PM suspend. This ensures the audio DSP is not issuing transfers on the USB bus. - Do not override platform ops if they are already populated. - Introduce a shared status variable between the USB offload and USB SND layers, to ensure that only one path is active at a time. If the USB bus is occupied, then userspace is notified that the path is busy. Mathias Nyman (3): xhci: add support to allocate several interrupters xhci: add helper to stop endpoint and wait for completion xhci: sideband: add initial api to register a sideband entity Wesley Cheng (38): usb: host: xhci-mem: Cleanup pending secondary event ring events usb: host: xhci-mem: Allow for interrupter clients to choose specific index ASoC: Add SOC USB APIs for adding an USB backend ASoC: dt-bindings: qcom,q6dsp-lpass-ports: Add USB_RX port ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp ASoC: qdsp6: q6afe: Increase APR timeout ASoC: qcom: qdsp6: Add USB backend ASoC driver for Q6 ALSA: usb-audio: Introduce USB SND platform op callbacks ALSA: usb-audio: Export USB SND APIs for modules ALSA: usb-audio: Save UAC sample size information dt-bindings: usb: xhci: Add num-hc-interrupters definition dt-bindings: usb: dwc3: Limit num-hc-interrupters definition usb: dwc3: Specify maximum number of XHCI interrupters usb: host: xhci-plat: Set XHCI max interrupters if property is present ALSA: usb-audio: qcom: Add USB QMI definitions ALSA: usb-audio: qcom: Introduce QC USB SND offloading support ALSA: usb-audio: Check for support for requested audio format ASoC: usb: Add PCM format check API for USB backend ASoC: qcom: qdsp6: Ensure PCM format is supported by USB audio device ALSA: usb-audio: Prevent starting of audio stream if in use ALSA: usb-audio: Do not allow USB offload path if PCM device is in use ASoC: dt-bindings: Add Q6USB backend ASoC: dt-bindings: Update example for enabling USB offload on SM8250 ALSA: usb-audio: qcom: Populate PCM and USB chip information ASoC: qcom: qdsp6: Add support to track available USB PCM devices ASoC: Introduce SND kcontrols to select sound card and PCM device ASoC: qcom: qdsp6: Add SOC USB offload select get/put callbacks ASoC: Add SND kcontrol for fetching USB offload status ASoC: qcom: qdsp6: Add PCM ops to track current state ASoC: usb: Create SOC USB SND jack kcontrol ASoC: qcom: qdsp6: Add headphone jack for offload connection status ASoC: usb: Fetch ASoC sound card information ALSA: usb-audio: mixer: Add USB offloading mixer control ALSA: usb-audio: qcom: Use card and PCM index from QMI request ALSA: usb-audio: Allow for rediscovery of connected USB SND devices ASoC: usb: Rediscover USB SND devices on USB port add ASoC: qcom: Populate SoC components string ASoC: doc: Add documentation for SOC USB .../devicetree/bindings/sound/qcom,q6usb.yaml | 55 + .../bindings/sound/qcom,sm8250.yaml | 15 + .../devicetree/bindings/usb/snps,dwc3.yaml | 4 + .../devicetree/bindings/usb/usb-xhci.yaml | 6 + Documentation/sound/soc/index.rst | 1 + Documentation/sound/soc/usb.rst | 611 ++++++ drivers/usb/dwc3/core.c | 12 + drivers/usb/dwc3/core.h | 2 + drivers/usb/dwc3/host.c | 5 +- drivers/usb/host/Kconfig | 9 + drivers/usb/host/Makefile | 2 + drivers/usb/host/xhci-debugfs.c | 2 +- drivers/usb/host/xhci-mem.c | 113 +- drivers/usb/host/xhci-plat.c | 2 + drivers/usb/host/xhci-ring.c | 48 +- drivers/usb/host/xhci-sideband.c | 374 ++++ drivers/usb/host/xhci.c | 115 +- drivers/usb/host/xhci.h | 19 +- .../sound/qcom,q6dsp-lpass-ports.h | 1 + include/linux/usb/xhci-sideband.h | 67 + include/sound/q6usboffload.h | 20 + include/sound/soc-usb.h | 90 + sound/soc/Makefile | 2 +- sound/soc/qcom/Kconfig | 4 + sound/soc/qcom/common.c | 41 + sound/soc/qcom/common.h | 4 +- sound/soc/qcom/qdsp6/Makefile | 1 + sound/soc/qcom/qdsp6/q6afe-dai.c | 60 + sound/soc/qcom/qdsp6/q6afe.c | 193 +- sound/soc/qcom/qdsp6/q6afe.h | 36 +- sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c | 23 + sound/soc/qcom/qdsp6/q6dsp-lpass-ports.h | 1 + sound/soc/qcom/qdsp6/q6routing.c | 9 + sound/soc/qcom/qdsp6/q6usb.c | 401 ++++ sound/soc/qcom/sm8250.c | 14 +- sound/soc/soc-usb.c | 538 +++++ sound/usb/Kconfig | 19 + sound/usb/Makefile | 3 +- sound/usb/card.c | 123 ++ sound/usb/card.h | 24 + sound/usb/endpoint.c | 1 + sound/usb/format.c | 1 + sound/usb/helper.c | 1 + sound/usb/mixer.c | 5 + sound/usb/mixer_usb_offload.c | 82 + sound/usb/mixer_usb_offload.h | 14 + sound/usb/pcm.c | 94 +- sound/usb/pcm.h | 11 + sound/usb/qcom/Makefile | 2 + sound/usb/qcom/qc_audio_offload.c | 1909 +++++++++++++++++ sound/usb/qcom/usb_audio_qmi_v01.c | 892 ++++++++ sound/usb/qcom/usb_audio_qmi_v01.h | 162 ++ 52 files changed, 6161 insertions(+), 82 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6usb.yaml create mode 100644 Documentation/sound/soc/usb.rst create mode 100644 drivers/usb/host/xhci-sideband.c create mode 100644 include/linux/usb/xhci-sideband.h create mode 100644 include/sound/q6usboffload.h create mode 100644 include/sound/soc-usb.h create mode 100644 sound/soc/qcom/qdsp6/q6usb.c create mode 100644 sound/soc/soc-usb.c create mode 100644 sound/usb/mixer_usb_offload.c create mode 100644 sound/usb/mixer_usb_offload.h create mode 100644 sound/usb/qcom/Makefile create mode 100644 sound/usb/qcom/qc_audio_offload.c create mode 100644 sound/usb/qcom/usb_audio_qmi_v01.c create mode 100644 sound/usb/qcom/usb_audio_qmi_v01.h

3 45

[PATCH] ASoC: hdmi-codec: fix missing report for jack initial status
by Jerome Brunet 19 Dec '23

19 Dec '23

This fixes a problem introduced while fixing ELD reporting with no jack set. Most driver using the hdmi-codec will call the 'plugged_cb' callback directly when registered to report the initial state of the HDMI connector. With the commit mentionned, this occurs before jack is ready and the initial report is lost for platforms actually providing a jack for HDMI. Fix this by storing the hdmi connector status regardless of jack being set or not and report the last status when jack gets set. With this, the initial state is reported correctly even if it is disconnected. This was not done initially and is also a fix. Fixes: 15be353d55f9 ("ASoC: hdmi-codec: register hpd callback on component probe") Reported-by: Zhengqiao Xia <xiazhengqiao(a)huaqin.corp-partner.google.com> Closes: https://lore.kernel.org/alsa-devel/CADYyEwTNyY+fR9SgfDa-g6iiDwkU3MUdPVCYexs… Cc: Hsin-Yi Wang <hsinyi(a)google.com> Signed-off-by: Jerome Brunet <jbrunet(a)baylibre.com> --- sound/soc/codecs/hdmi-codec.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/hdmi-codec.c b/sound/soc/codecs/hdmi-codec.c index 20da1eaa4f1c..0938671700c6 100644 --- a/sound/soc/codecs/hdmi-codec.c +++ b/sound/soc/codecs/hdmi-codec.c @@ -850,8 +850,9 @@ static int hdmi_dai_probe(struct snd_soc_dai *dai) static void hdmi_codec_jack_report(struct hdmi_codec_priv *hcp, unsigned int jack_status) { - if (hcp->jack && jack_status != hcp->jack_status) { - snd_soc_jack_report(hcp->jack, jack_status, SND_JACK_LINEOUT); + if (jack_status != hcp->jack_status) { + if (hcp->jack) + snd_soc_jack_report(hcp->jack, jack_status, SND_JACK_LINEOUT); hcp->jack_status = jack_status; } } @@ -880,6 +881,13 @@ static int hdmi_codec_set_jack(struct snd_soc_component *component, if (hcp->hcd.ops->hook_plugged_cb) { hcp->jack = jack; + + /* + * Report the initial jack status which may have been provided + * by the parent hdmi driver while the hpd hook was registered. + */ + snd_soc_jack_report(jack, hcp->jack_status, SND_JACK_LINEOUT); + return 0; } -- 2.42.0

3 2

[PATCH] slimbus: qcom-ngd-ctrl: Make QMI message rules const
by Christophe JAILLET 19 Dec '23

19 Dec '23

Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that here. Before: ====== $ size drivers/slimbus/qcom-ngd-ctrl.o text data bss dec hex filename 30354 1993 96 32443 7ebb drivers/slimbus/qcom-ngd-ctrl.o After: ===== $ size drivers/slimbus/qcom-ngd-ctrl.o text data bss dec hex filename 30738 1593 96 32427 7eab drivers/slimbus/qcom-ngd-ctrl.o Compile tested only. Signed-off-by: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> --- drivers/slimbus/qcom-ngd-ctrl.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/slimbus/qcom-ngd-ctrl.c b/drivers/slimbus/qcom-ngd-ctrl.c index 77aa6d26476c..efeba8275a66 100644 --- a/drivers/slimbus/qcom-ngd-ctrl.c +++ b/drivers/slimbus/qcom-ngd-ctrl.c @@ -220,7 +220,7 @@ struct slimbus_power_resp_msg_v01 { struct qmi_response_type_v01 resp; }; -static struct qmi_elem_info slimbus_select_inst_req_msg_v01_ei[] = { +static const struct qmi_elem_info slimbus_select_inst_req_msg_v01_ei[] = { { .data_type = QMI_UNSIGNED_4_BYTE, .elem_len = 1, @@ -262,7 +262,7 @@ static struct qmi_elem_info slimbus_select_inst_req_msg_v01_ei[] = { }, }; -static struct qmi_elem_info slimbus_select_inst_resp_msg_v01_ei[] = { +static const struct qmi_elem_info slimbus_select_inst_resp_msg_v01_ei[] = { { .data_type = QMI_STRUCT, .elem_len = 1, @@ -284,7 +284,7 @@ static struct qmi_elem_info slimbus_select_inst_resp_msg_v01_ei[] = { }, }; -static struct qmi_elem_info slimbus_power_req_msg_v01_ei[] = { +static const struct qmi_elem_info slimbus_power_req_msg_v01_ei[] = { { .data_type = QMI_UNSIGNED_4_BYTE, .elem_len = 1, @@ -324,7 +324,7 @@ static struct qmi_elem_info slimbus_power_req_msg_v01_ei[] = { }, }; -static struct qmi_elem_info slimbus_power_resp_msg_v01_ei[] = { +static const struct qmi_elem_info slimbus_power_resp_msg_v01_ei[] = { { .data_type = QMI_STRUCT, .elem_len = 1, -- 2.34.1

1 0

[PATCH 1/2] ASoC: Intel: bytcr_rt5640: Add quirk for the Medion Lifetab S10346
by Hans de Goede 19 Dec '23

19 Dec '23

Add a quirk for the Medion Lifetab S10346, this BYTCR tablet has no CHAN package in its ACPI tables and uses SSP0-AIF1 rather then SSP0-AIF2 which is the default for BYTCR devices. Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> --- sound/soc/intel/boards/bytcr_rt5640.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index ed14d9e4aa53..ea9e562358b7 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -894,6 +894,18 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { BYT_RT5640_SSP0_AIF1 | BYT_RT5640_MCLK_EN), }, + { + /* Medion Lifetab S10346 */ + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), + DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"), + /* Above strings are much too generic, also match on BIOS date */ + DMI_MATCH(DMI_BIOS_DATE, "10/22/2015"), + }, + .driver_data = (void *)(BYTCR_INPUT_DEFAULTS | + BYT_RT5640_SSP0_AIF1 | + BYT_RT5640_MCLK_EN), + }, { /* Mele PCG03 Mini PC */ .matches = { DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "Mini PC"), -- 2.41.0

3 4

[PATCH 1/2] ASoC: qcom: Add x1e80100 sound machine driver
by Krzysztof Kozlowski 18 Dec '23

18 Dec '23

Add sound machine driver for the soundcards on Qualcomm X1E80100 SoC, supporting up to four channel audio playback over Soundwire bus. The driver is based on existing sc8280xp.c driver. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- sound/soc/qcom/Kconfig | 12 +++ sound/soc/qcom/Makefile | 2 + sound/soc/qcom/x1e80100.c | 168 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 182 insertions(+) create mode 100644 sound/soc/qcom/x1e80100.c diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig index e7b00d1d9e99..762491d6f2f2 100644 --- a/sound/soc/qcom/Kconfig +++ b/sound/soc/qcom/Kconfig @@ -221,4 +221,16 @@ config SND_SOC_SC7280 SC7280 SoC-based systems. Say Y or M if you want to use audio device on this SoCs. +config SND_SOC_X1E80100 + tristate "SoC Machine driver for X1E80100 boards" + depends on QCOM_APR && SOUNDWIRE + depends on COMMON_CLK + select SND_SOC_QDSP6 + select SND_SOC_QCOM_COMMON + select SND_SOC_QCOM_SDW + help + Add support for audio on Qualcomm Technologies Inc. + X1E80100 SoC-based systems. + Say Y or M if you want to use audio device on this SoCs. + endif #SND_SOC_QCOM diff --git a/sound/soc/qcom/Makefile b/sound/soc/qcom/Makefile index 254350d9dc06..34f3fcb8ee9a 100644 --- a/sound/soc/qcom/Makefile +++ b/sound/soc/qcom/Makefile @@ -29,6 +29,7 @@ snd-soc-sm8250-objs := sm8250.o snd-soc-sc8280xp-objs := sc8280xp.o snd-soc-qcom-common-objs := common.o snd-soc-qcom-sdw-objs := sdw.o +snd-soc-x1e80100-objs := x1e80100.o obj-$(CONFIG_SND_SOC_STORM) += snd-soc-storm.o obj-$(CONFIG_SND_SOC_APQ8016_SBC) += snd-soc-apq8016-sbc.o @@ -40,6 +41,7 @@ obj-$(CONFIG_SND_SOC_SDM845) += snd-soc-sdm845.o obj-$(CONFIG_SND_SOC_SM8250) += snd-soc-sm8250.o obj-$(CONFIG_SND_SOC_QCOM_COMMON) += snd-soc-qcom-common.o obj-$(CONFIG_SND_SOC_QCOM_SDW) += snd-soc-qcom-sdw.o +obj-$(CONFIG_SND_SOC_X1E80100) += snd-soc-x1e80100.o #DSP lib obj-$(CONFIG_SND_SOC_QDSP6) += qdsp6/ diff --git a/sound/soc/qcom/x1e80100.c b/sound/soc/qcom/x1e80100.c new file mode 100644 index 000000000000..c3c8bf7ffb5b --- /dev/null +++ b/sound/soc/qcom/x1e80100.c @@ -0,0 +1,168 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2023, Linaro Limited + +#include <dt-bindings/sound/qcom,q6afe.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/soundwire/sdw.h> +#include <sound/pcm.h> +#include <sound/jack.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> + +#include "common.h" +#include "qdsp6/q6afe.h" +#include "sdw.h" + +struct x1e80100_snd_data { + bool stream_prepared[AFE_PORT_MAX]; + struct snd_soc_card *card; + struct sdw_stream_runtime *sruntime[AFE_PORT_MAX]; + struct snd_soc_jack jack; + bool jack_setup; +}; + +static int x1e80100_snd_init(struct snd_soc_pcm_runtime *rtd) +{ + struct x1e80100_snd_data *data = snd_soc_card_get_drvdata(rtd->card); + + return qcom_snd_wcd_jack_setup(rtd, &data->jack, &data->jack_setup); +} + +static void x1e80100_snd_shutdown(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *cpu_dai = snd_soc_rtd_to_cpu(rtd, 0); + struct x1e80100_snd_data *data = snd_soc_card_get_drvdata(rtd->card); + struct sdw_stream_runtime *sruntime = data->sruntime[cpu_dai->id]; + + data->sruntime[cpu_dai->id] = NULL; + sdw_release_stream(sruntime); +} + +static int x1e80100_be_hw_params_fixup(struct snd_soc_pcm_runtime *rtd, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_dai *cpu_dai = snd_soc_rtd_to_cpu(rtd, 0); + struct snd_interval *rate = hw_param_interval(params, + SNDRV_PCM_HW_PARAM_RATE); + struct snd_interval *channels = hw_param_interval(params, + SNDRV_PCM_HW_PARAM_CHANNELS); + + rate->min = rate->max = 48000; + switch (cpu_dai->id) { + case TX_CODEC_DMA_TX_0: + case TX_CODEC_DMA_TX_1: + case TX_CODEC_DMA_TX_2: + case TX_CODEC_DMA_TX_3: + channels->min = 1; + break; + default: + break; + } + + return 0; +} + +static int x1e80100_snd_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *cpu_dai = snd_soc_rtd_to_cpu(rtd, 0); + struct x1e80100_snd_data *data = snd_soc_card_get_drvdata(rtd->card); + + return qcom_snd_sdw_hw_params(substream, params, &data->sruntime[cpu_dai->id]); +} + +static int x1e80100_snd_prepare(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *cpu_dai = snd_soc_rtd_to_cpu(rtd, 0); + struct x1e80100_snd_data *data = snd_soc_card_get_drvdata(rtd->card); + struct sdw_stream_runtime *sruntime = data->sruntime[cpu_dai->id]; + + return qcom_snd_sdw_prepare(substream, sruntime, + &data->stream_prepared[cpu_dai->id]); +} + +static int x1e80100_snd_hw_free(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct x1e80100_snd_data *data = snd_soc_card_get_drvdata(rtd->card); + struct snd_soc_dai *cpu_dai = snd_soc_rtd_to_cpu(rtd, 0); + struct sdw_stream_runtime *sruntime = data->sruntime[cpu_dai->id]; + + return qcom_snd_sdw_hw_free(substream, sruntime, + &data->stream_prepared[cpu_dai->id]); +} + +static const struct snd_soc_ops x1e80100_be_ops = { + .startup = qcom_snd_sdw_startup, + .shutdown = x1e80100_snd_shutdown, + .hw_params = x1e80100_snd_hw_params, + .hw_free = x1e80100_snd_hw_free, + .prepare = x1e80100_snd_prepare, +}; + +static void x1e80100_add_be_ops(struct snd_soc_card *card) +{ + struct snd_soc_dai_link *link; + int i; + + for_each_card_prelinks(card, i, link) { + if (link->no_pcm == 1) { + link->init = x1e80100_snd_init; + link->be_hw_params_fixup = x1e80100_be_hw_params_fixup; + link->ops = &x1e80100_be_ops; + } + } +} + +static int x1e80100_platform_probe(struct platform_device *pdev) +{ + struct snd_soc_card *card; + struct x1e80100_snd_data *data; + struct device *dev = &pdev->dev; + int ret; + + card = devm_kzalloc(dev, sizeof(*card), GFP_KERNEL); + if (!card) + return -ENOMEM; + /* Allocate the private data */ + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + card->owner = THIS_MODULE; + card->dev = dev; + dev_set_drvdata(dev, card); + snd_soc_card_set_drvdata(card, data); + + ret = qcom_snd_parse_of(card); + if (ret) + return ret; + + card->driver_name = "x1e80100"; + x1e80100_add_be_ops(card); + + return devm_snd_soc_register_card(dev, card); +} + +static const struct of_device_id snd_x1e80100_dt_match[] = { + { .compatible = "qcom,x1e80100-sndcard", }, + {} +}; +MODULE_DEVICE_TABLE(of, snd_x1e80100_dt_match); + +static struct platform_driver snd_x1e80100_driver = { + .probe = x1e80100_platform_probe, + .driver = { + .name = "snd-x1e80100", + .of_match_table = snd_x1e80100_dt_match, + }, +}; +module_platform_driver(snd_x1e80100_driver); +MODULE_AUTHOR("Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org"); +MODULE_AUTHOR("Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org>"); +MODULE_DESCRIPTION("Qualcomm X1E80100 ASoC Machine Driver"); +MODULE_LICENSE("GPL"); -- 2.34.1

3 3

[PATCH] ASoC: qcom: Fix trivial code style issues
by Krzysztof Kozlowski 18 Dec '23

18 Dec '23

Fix few trivial code style issues, pointed out by checkpatch, so they do not get copied to new code (when old code is used as template): WARNING: Prefer "GPL" over "GPL v2" - see commit bf7fbeeae6db ("module: Cure the MODULE_LICENSE "GPL" vs. "GPL v2" bogosity") WARNING: function definition argument 'struct platform_device *' should also have an identifier name ERROR: code indent should use tabs where possible WARNING: please, no spaces at the start of a line WARNING: Missing a blank line after declarations WARNING: unnecessary whitespace before a quoted newline Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- sound/soc/qcom/apq8016_sbc.c | 2 +- sound/soc/qcom/apq8096.c | 2 +- sound/soc/qcom/common.c | 2 +- sound/soc/qcom/lpass-apq8016.c | 2 +- sound/soc/qcom/lpass-cpu.c | 2 +- sound/soc/qcom/lpass-hdmi.c | 2 +- sound/soc/qcom/lpass-ipq806x.c | 2 +- sound/soc/qcom/lpass-platform.c | 2 +- sound/soc/qcom/lpass-sc7180.c | 2 +- sound/soc/qcom/lpass.h | 2 +- sound/soc/qcom/qdsp6/q6afe.c | 8 ++++---- sound/soc/qcom/qdsp6/q6apm-dai.c | 4 ++-- sound/soc/qcom/qdsp6/q6asm.h | 20 ++++++++++---------- sound/soc/qcom/qdsp6/topology.c | 3 ++- sound/soc/qcom/sc7180.c | 2 +- sound/soc/qcom/sc8280xp.c | 2 +- sound/soc/qcom/sdm845.c | 2 +- sound/soc/qcom/sdw.c | 2 +- sound/soc/qcom/sm8250.c | 2 +- sound/soc/qcom/storm.c | 2 +- 20 files changed, 34 insertions(+), 33 deletions(-) diff --git a/sound/soc/qcom/apq8016_sbc.c b/sound/soc/qcom/apq8016_sbc.c index efbdbb4dd753..4834a56eaa88 100644 --- a/sound/soc/qcom/apq8016_sbc.c +++ b/sound/soc/qcom/apq8016_sbc.c @@ -344,4 +344,4 @@ module_platform_driver(apq8016_sbc_platform_driver); MODULE_AUTHOR("Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org"); MODULE_DESCRIPTION("APQ8016 ASoC Machine Driver"); -MODULE_LICENSE("GPL v2"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/qcom/apq8096.c b/sound/soc/qcom/apq8096.c index 7ee6df02b906..4f6594cc723c 100644 --- a/sound/soc/qcom/apq8096.c +++ b/sound/soc/qcom/apq8096.c @@ -142,4 +142,4 @@ static struct platform_driver msm_snd_apq8096_driver = { module_platform_driver(msm_snd_apq8096_driver); MODULE_AUTHOR("Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org"); MODULE_DESCRIPTION("APQ8096 ASoC Machine Driver"); -MODULE_LICENSE("GPL v2"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/qcom/common.c b/sound/soc/qcom/common.c index 483bbf53a541..756706d5b493 100644 --- a/sound/soc/qcom/common.c +++ b/sound/soc/qcom/common.c @@ -239,4 +239,4 @@ int qcom_snd_wcd_jack_setup(struct snd_soc_pcm_runtime *rtd, return 0; } EXPORT_SYMBOL_GPL(qcom_snd_wcd_jack_setup); -MODULE_LICENSE("GPL v2"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/qcom/lpass-apq8016.c b/sound/soc/qcom/lpass-apq8016.c index 8e58e814a95f..9005c85f8c54 100644 --- a/sound/soc/qcom/lpass-apq8016.c +++ b/sound/soc/qcom/lpass-apq8016.c @@ -305,5 +305,5 @@ static struct platform_driver apq8016_lpass_cpu_platform_driver = { module_platform_driver(apq8016_lpass_cpu_platform_driver); MODULE_DESCRIPTION("APQ8016 LPASS CPU Driver"); -MODULE_LICENSE("GPL v2"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/qcom/lpass-cpu.c b/sound/soc/qcom/lpass-cpu.c index 88b80ed45c66..b0f3e02cb043 100644 --- a/sound/soc/qcom/lpass-cpu.c +++ b/sound/soc/qcom/lpass-cpu.c @@ -1294,4 +1294,4 @@ void asoc_qcom_lpass_cpu_platform_shutdown(struct platform_device *pdev) EXPORT_SYMBOL_GPL(asoc_qcom_lpass_cpu_platform_shutdown); MODULE_DESCRIPTION("QTi LPASS CPU Driver"); -MODULE_LICENSE("GPL v2"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/qcom/lpass-hdmi.c b/sound/soc/qcom/lpass-hdmi.c index 24b1a7523adb..ce753ebc0894 100644 --- a/sound/soc/qcom/lpass-hdmi.c +++ b/sound/soc/qcom/lpass-hdmi.c @@ -251,4 +251,4 @@ const struct snd_soc_dai_ops asoc_qcom_lpass_hdmi_dai_ops = { EXPORT_SYMBOL_GPL(asoc_qcom_lpass_hdmi_dai_ops); MODULE_DESCRIPTION("QTi LPASS HDMI Driver"); -MODULE_LICENSE("GPL v2"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/qcom/lpass-ipq806x.c b/sound/soc/qcom/lpass-ipq806x.c index e0e9ad35821c..5c874139f39d 100644 --- a/sound/soc/qcom/lpass-ipq806x.c +++ b/sound/soc/qcom/lpass-ipq806x.c @@ -177,4 +177,4 @@ static struct platform_driver ipq806x_lpass_cpu_platform_driver = { module_platform_driver(ipq806x_lpass_cpu_platform_driver); MODULE_DESCRIPTION("QTi LPASS CPU Driver"); -MODULE_LICENSE("GPL v2"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/qcom/lpass-platform.c b/sound/soc/qcom/lpass-platform.c index 333c427cfdb0..addd2c4bdd3e 100644 --- a/sound/soc/qcom/lpass-platform.c +++ b/sound/soc/qcom/lpass-platform.c @@ -1384,4 +1384,4 @@ int asoc_qcom_lpass_platform_register(struct platform_device *pdev) EXPORT_SYMBOL_GPL(asoc_qcom_lpass_platform_register); MODULE_DESCRIPTION("QTi LPASS Platform Driver"); -MODULE_LICENSE("GPL v2"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/qcom/lpass-sc7180.c b/sound/soc/qcom/lpass-sc7180.c index 22063b834554..e6bcdf6ed796 100644 --- a/sound/soc/qcom/lpass-sc7180.c +++ b/sound/soc/qcom/lpass-sc7180.c @@ -322,4 +322,4 @@ static struct platform_driver sc7180_lpass_cpu_platform_driver = { module_platform_driver(sc7180_lpass_cpu_platform_driver); MODULE_DESCRIPTION("SC7180 LPASS CPU DRIVER"); -MODULE_LICENSE("GPL v2"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/qcom/lpass.h b/sound/soc/qcom/lpass.h index 2f222bd4ffcc..27a2bf9a6613 100644 --- a/sound/soc/qcom/lpass.h +++ b/sound/soc/qcom/lpass.h @@ -398,7 +398,7 @@ struct lpass_pcm_data { }; /* register the platform driver from the CPU DAI driver */ -int asoc_qcom_lpass_platform_register(struct platform_device *); +int asoc_qcom_lpass_platform_register(struct platform_device *pdev); void asoc_qcom_lpass_cpu_platform_remove(struct platform_device *pdev); void asoc_qcom_lpass_cpu_platform_shutdown(struct platform_device *pdev); int asoc_qcom_lpass_cpu_platform_probe(struct platform_device *pdev); diff --git a/sound/soc/qcom/qdsp6/q6afe.c b/sound/soc/qcom/qdsp6/q6afe.c index 91d39f6ad0bd..ef7557be5d66 100644 --- a/sound/soc/qcom/qdsp6/q6afe.c +++ b/sound/soc/qcom/qdsp6/q6afe.c @@ -553,13 +553,13 @@ struct q6afe_port { }; struct afe_cmd_remote_lpass_core_hw_vote_request { - uint32_t hw_block_id; - char client_name[8]; + uint32_t hw_block_id; + char client_name[8]; } __packed; struct afe_cmd_remote_lpass_core_hw_devote_request { - uint32_t hw_block_id; - uint32_t client_handle; + uint32_t hw_block_id; + uint32_t client_handle; } __packed; diff --git a/sound/soc/qcom/qdsp6/q6apm-dai.c b/sound/soc/qcom/qdsp6/q6apm-dai.c index b799ac724627..052e40cb38fe 100644 --- a/sound/soc/qcom/qdsp6/q6apm-dai.c +++ b/sound/soc/qcom/qdsp6/q6apm-dai.c @@ -134,7 +134,7 @@ static void event_handler(uint32_t opcode, uint32_t token, uint32_t *payload, vo prtd->state = Q6APM_STREAM_STOPPED; break; case APM_CLIENT_EVENT_DATA_WRITE_DONE: - spin_lock_irqsave(&prtd->lock, flags); + spin_lock_irqsave(&prtd->lock, flags); prtd->pos += prtd->pcm_count; spin_unlock_irqrestore(&prtd->lock, flags); snd_pcm_period_elapsed(substream); @@ -143,7 +143,7 @@ static void event_handler(uint32_t opcode, uint32_t token, uint32_t *payload, vo break; case APM_CLIENT_EVENT_DATA_READ_DONE: - spin_lock_irqsave(&prtd->lock, flags); + spin_lock_irqsave(&prtd->lock, flags); prtd->pos += prtd->pcm_count; spin_unlock_irqrestore(&prtd->lock, flags); snd_pcm_period_elapsed(substream); diff --git a/sound/soc/qcom/qdsp6/q6asm.h b/sound/soc/qcom/qdsp6/q6asm.h index 0103d8dae5da..519e1b3a3f7c 100644 --- a/sound/soc/qcom/qdsp6/q6asm.h +++ b/sound/soc/qcom/qdsp6/q6asm.h @@ -35,16 +35,16 @@ enum { #define ASM_LAST_BUFFER_FLAG BIT(30) struct q6asm_flac_cfg { - u32 sample_rate; - u32 ext_sample_rate; - u32 min_frame_size; - u32 max_frame_size; - u16 stream_info_present; - u16 min_blk_size; - u16 max_blk_size; - u16 ch_cfg; - u16 sample_size; - u16 md5_sum; + u32 sample_rate; + u32 ext_sample_rate; + u32 min_frame_size; + u32 max_frame_size; + u16 stream_info_present; + u16 min_blk_size; + u16 max_blk_size; + u16 ch_cfg; + u16 sample_size; + u16 md5_sum; }; struct q6asm_wma_cfg { diff --git a/sound/soc/qcom/qdsp6/topology.c b/sound/soc/qcom/qdsp6/topology.c index 130b22a34fb3..70572c83e101 100644 --- a/sound/soc/qcom/qdsp6/topology.c +++ b/sound/soc/qcom/qdsp6/topology.c @@ -545,6 +545,7 @@ static struct audioreach_module *audioreach_parse_common_tokens(struct q6apm *ap if (mod) { int pn, id = 0; + mod->module_id = module_id; mod->max_ip_port = max_ip_port; mod->max_op_port = max_op_port; @@ -1271,7 +1272,7 @@ int audioreach_tplg_init(struct snd_soc_component *component) ret = request_firmware(&fw, tplg_fw_name, dev); if (ret < 0) { - dev_err(dev, "tplg firmware loading %s failed %d \n", tplg_fw_name, ret); + dev_err(dev, "tplg firmware loading %s failed %d\n", tplg_fw_name, ret); goto err; } diff --git a/sound/soc/qcom/sc7180.c b/sound/soc/qcom/sc7180.c index b0320a74d508..a15f385ede45 100644 --- a/sound/soc/qcom/sc7180.c +++ b/sound/soc/qcom/sc7180.c @@ -578,4 +578,4 @@ static struct platform_driver sc7180_snd_driver = { module_platform_driver(sc7180_snd_driver); MODULE_DESCRIPTION("sc7180 ASoC Machine Driver"); -MODULE_LICENSE("GPL v2"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/qcom/sc8280xp.c b/sound/soc/qcom/sc8280xp.c index 7c20b25ba3de..7c5a81681a2a 100644 --- a/sound/soc/qcom/sc8280xp.c +++ b/sound/soc/qcom/sc8280xp.c @@ -168,4 +168,4 @@ static struct platform_driver snd_sc8280xp_driver = { module_platform_driver(snd_sc8280xp_driver); MODULE_AUTHOR("Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org"); MODULE_DESCRIPTION("SC8280XP ASoC Machine Driver"); -MODULE_LICENSE("GPL v2"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/qcom/sdm845.c b/sound/soc/qcom/sdm845.c index 252a0f0819be..75701546b6ea 100644 --- a/sound/soc/qcom/sdm845.c +++ b/sound/soc/qcom/sdm845.c @@ -625,4 +625,4 @@ static struct platform_driver sdm845_snd_driver = { module_platform_driver(sdm845_snd_driver); MODULE_DESCRIPTION("sdm845 ASoC Machine Driver"); -MODULE_LICENSE("GPL v2"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/qcom/sdw.c b/sound/soc/qcom/sdw.c index 77dbe0c28b29..7f5089bbe022 100644 --- a/sound/soc/qcom/sdw.c +++ b/sound/soc/qcom/sdw.c @@ -160,4 +160,4 @@ int qcom_snd_sdw_hw_free(struct snd_pcm_substream *substream, return 0; } EXPORT_SYMBOL_GPL(qcom_snd_sdw_hw_free); -MODULE_LICENSE("GPL v2"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/qcom/sm8250.c b/sound/soc/qcom/sm8250.c index f298167c2a23..d70df72c0160 100644 --- a/sound/soc/qcom/sm8250.c +++ b/sound/soc/qcom/sm8250.c @@ -182,4 +182,4 @@ static struct platform_driver snd_sm8250_driver = { module_platform_driver(snd_sm8250_driver); MODULE_AUTHOR("Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org"); MODULE_DESCRIPTION("SM8250 ASoC Machine Driver"); -MODULE_LICENSE("GPL v2"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/qcom/storm.c b/sound/soc/qcom/storm.c index 553165f11d30..c8d5ac43a176 100644 --- a/sound/soc/qcom/storm.c +++ b/sound/soc/qcom/storm.c @@ -140,4 +140,4 @@ static struct platform_driver storm_platform_driver = { module_platform_driver(storm_platform_driver); MODULE_DESCRIPTION("QTi IPQ806x-based Storm Machine Driver"); -MODULE_LICENSE("GPL v2"); +MODULE_LICENSE("GPL"); -- 2.34.1

2 1

[PATCH] ASoC: tas2781: add support for FW version 0x0503
by Gergo Koteles 18 Dec '23

18 Dec '23

Layout of FW version 0x0503 is compatible with 0x0502. Already supported by TI's tas2781-linux-driver tree. https://git.ti.com/cgit/tas2781-linux-drivers/tas2781-linux-driver/ Fixes: 915f5eadebd2 ("ASoC: tas2781: firmware lib") CC: stable(a)vger.kernel.org Signed-off-by: Gergo Koteles <soyer(a)irl.hu> --- sound/soc/codecs/tas2781-fmwlib.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/tas2781-fmwlib.c b/sound/soc/codecs/tas2781-fmwlib.c index eb55abae0d7b..20dc2df034e9 100644 --- a/sound/soc/codecs/tas2781-fmwlib.c +++ b/sound/soc/codecs/tas2781-fmwlib.c @@ -2012,6 +2012,7 @@ static int tasdevice_dspfw_ready(const struct firmware *fmw, case 0x301: case 0x302: case 0x502: + case 0x503: tas_priv->fw_parse_variable_header = fw_parse_variable_header_kernel; tas_priv->fw_parse_program_data = base-commit: ffc253263a1375a65fa6c9f62a893e9767fbebfa -- 2.43.0

2 1

[PATCH 1/4] ASoC: dt-bindings: qcom,lpass-rx-macro: Add X1E80100 LPASS RX
by Krzysztof Kozlowski 18 Dec '23

18 Dec '23

Add bindings for Qualcomm X1E80100 SoC Low Power Audio SubSystem (LPASS) RX macro codec, which looks like compatible with earlier SM8550. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- .../devicetree/bindings/sound/qcom,lpass-rx-macro.yaml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml index cbc36646100f..b8540b30741e 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml @@ -19,7 +19,9 @@ properties: - qcom,sm8550-lpass-rx-macro - qcom,sc8280xp-lpass-rx-macro - items: - - const: qcom,sm8650-lpass-rx-macro + - enum: + - qcom,sm8650-lpass-rx-macro + - qcom,x1e80100-lpass-rx-macro - const: qcom,sm8550-lpass-rx-macro reg: -- 2.34.1

5 8

[PATCH AUTOSEL 6.6 03/18] soundwire: intel_ace2x: fix AC timing setting for ACE2.x
by Sasha Levin 18 Dec '23

18 Dec '23

From: Chao Song <chao.song(a)linux.intel.com> [ Upstream commit 393cae5f32d640b9798903702018a48c7a45e59f ] Start from ACE1.x, DOAISE is added to AC timing control register bit 5, it combines with DOAIS to get effective timing, and has the default value 1. The current code fills DOAIS, DACTQE and DODS bits to a variable initialized to zero, and updates the variable to AC timing control register. With this operation, We change DOAISE to 0, and force a much more aggressive timing. The timing is even unable to form a working waveform on SDA pin. This patch uses read-modify-write operation for the AC timing control register access, thus makes sure those bits not supposed and intended to change are not touched. Signed-off-by: Chao Song <chao.song(a)linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Link: https://lore.kernel.org/r/20231127124735.2080562-1-yung-chuan.liao@linux.in… Signed-off-by: Vinod Koul <vkoul(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/soundwire/intel_ace2x.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/soundwire/intel_ace2x.c b/drivers/soundwire/intel_ace2x.c index a9d25ae0b73fe..e320c91289135 100644 --- a/drivers/soundwire/intel_ace2x.c +++ b/drivers/soundwire/intel_ace2x.c @@ -23,8 +23,9 @@ static void intel_shim_vs_init(struct sdw_intel *sdw) { void __iomem *shim_vs = sdw->link_res->shim_vs; - u16 act = 0; + u16 act; + act = intel_readw(shim_vs, SDW_SHIM2_INTEL_VS_ACTMCTL); u16p_replace_bits(&act, 0x1, SDW_SHIM2_INTEL_VS_ACTMCTL_DOAIS); act |= SDW_SHIM2_INTEL_VS_ACTMCTL_DACTQE; act |= SDW_SHIM2_INTEL_VS_ACTMCTL_DODS; -- 2.43.0

1 0