December 2023 - Alsa-devel - mailman.alsa-project.org

[RFC, PATCH v2 1/2] ASoC: qcom: sdw: Add TDM support
by Jianhua Lu 12 Dec '23

12 Dec '23

Add qcom TDM setup function to support TDM ports for qcom platform. Signed-off-by: Jianhua Lu <lujianhua000(a)gmail.com> --- Changes in v2: 1. remove EXPORT_SYMBOL_GPL 2. remove static modifier sound/soc/qcom/sdw.c | 63 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 63 insertions(+) diff --git a/sound/soc/qcom/sdw.c b/sound/soc/qcom/sdw.c index 77dbe0c28b29..948abbd2e0e3 100644 --- a/sound/soc/qcom/sdw.c +++ b/sound/soc/qcom/sdw.c @@ -4,6 +4,7 @@ #include <dt-bindings/sound/qcom,q6afe.h> #include <linux/module.h> +#include <sound/pcm_params.h> #include <sound/soc.h> #include "sdw.h" @@ -101,6 +102,65 @@ int qcom_snd_sdw_prepare(struct snd_pcm_substream *substream, } EXPORT_SYMBOL_GPL(qcom_snd_sdw_prepare); +int qcom_snd_tdm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream); + struct snd_soc_dai *cpu_dai = snd_soc_rtd_to_cpu(rtd, 0); + unsigned int tdm_slot_offset[8] = { 0, 4, 8, 12, 16, 20, 24, 28 }; + int channels, slot_width; + int ret; + + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + slot_width = 16; + break; + case SNDRV_PCM_FORMAT_S24_LE: + slot_width = 24; + break; + case SNDRV_PCM_FORMAT_S32_LE: + slot_width = 32; + break; + default: + dev_err(rtd->dev, "%s: invalid param format 0x%x\n", __func__, + params_format(params)); + return -EINVAL; + } + + channels = params_channels(params); + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + ret = snd_soc_dai_set_tdm_slot(cpu_dai, 0, 0x3, 8, slot_width); + if (ret < 0) { + dev_err(rtd->dev, "%s: failed to set tdm slot, err:%d\n", + __func__, ret); + return ret; + } + + ret = snd_soc_dai_set_channel_map(cpu_dai, 0, NULL, channels, + tdm_slot_offset); + if (ret < 0) { + dev_err(rtd->dev, "%s: failed to set channel map, err:%d\n", + __func__, ret); + return ret; + } + } else { + ret = snd_soc_dai_set_tdm_slot(cpu_dai, 0xf, 0, 8, slot_width); + if (ret < 0) { + dev_err(rtd->dev, "%s: failed to set tdm slot, err:%d\n", + __func__, ret); + return ret; + } + + ret = snd_soc_dai_set_channel_map(cpu_dai, channels, + tdm_slot_offset, 0, NULL); + if (ret < 0) { + dev_err(rtd->dev, "%s: failed to set channel map, err:%d\n", + __func__, ret); + return ret; + } + } +} + int qcom_snd_sdw_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, struct sdw_stream_runtime **psruntime) @@ -125,6 +185,9 @@ int qcom_snd_sdw_hw_params(struct snd_pcm_substream *substream, *psruntime = sruntime; } break; + case PRIMARY_TDM_RX_0...QUINARY_TDM_TX_7: + qcom_snd_tdm_hw_params(substream, params); + break; } return 0; -- 2.41.0

2 3

[PATCH 1/2] ASoC: cs42l43: Don't enable bias sense during type detect
by Charles Keepax 11 Dec '23

11 Dec '23

Alas on some headsets the bias sense can cause problems with the type detection. It can occasionally be falsely triggered by the type detect itself and as the clamp is applied when this happens, it will cause a headset to be incorrectly identified as headphones. As such it should be disabled whilst running type detect. This does mean a jack removal during type detect will cause a larger click but that is unfortunately unavoidable. Fixes: 1e4ce0d5c023 ("ASoC: cs42l43: Move headset bias sense enable earlier in process") Signed-off-by: Charles Keepax <ckeepax(a)opensource.cirrus.com> --- sound/soc/codecs/cs42l43-jack.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) diff --git a/sound/soc/codecs/cs42l43-jack.c b/sound/soc/codecs/cs42l43-jack.c index 73454de068cf8..54a3ea6064438 100644 --- a/sound/soc/codecs/cs42l43-jack.c +++ b/sound/soc/codecs/cs42l43-jack.c @@ -237,7 +237,7 @@ int cs42l43_set_jack(struct snd_soc_component *component, return ret; } -static void cs42l43_start_hs_bias(struct cs42l43_codec *priv, bool force_high) +static void cs42l43_start_hs_bias(struct cs42l43_codec *priv, bool type_detect) { struct cs42l43 *cs42l43 = priv->core; unsigned int val = 0x3 << CS42L43_HSBIAS_MODE_SHIFT; @@ -247,16 +247,17 @@ static void cs42l43_start_hs_bias(struct cs42l43_codec *priv, bool force_high) regmap_update_bits(cs42l43->regmap, CS42L43_HS2, CS42L43_HS_CLAMP_DISABLE_MASK, CS42L43_HS_CLAMP_DISABLE_MASK); - if (!force_high && priv->bias_low) - val = 0x2 << CS42L43_HSBIAS_MODE_SHIFT; - - if (priv->bias_sense_ua) { - regmap_update_bits(cs42l43->regmap, - CS42L43_HS_BIAS_SENSE_AND_CLAMP_AUTOCONTROL, - CS42L43_HSBIAS_SENSE_EN_MASK | - CS42L43_AUTO_HSBIAS_CLAMP_EN_MASK, - CS42L43_HSBIAS_SENSE_EN_MASK | - CS42L43_AUTO_HSBIAS_CLAMP_EN_MASK); + if (!type_detect) { + if (priv->bias_low) + val = 0x2 << CS42L43_HSBIAS_MODE_SHIFT; + + if (priv->bias_sense_ua) + regmap_update_bits(cs42l43->regmap, + CS42L43_HS_BIAS_SENSE_AND_CLAMP_AUTOCONTROL, + CS42L43_HSBIAS_SENSE_EN_MASK | + CS42L43_AUTO_HSBIAS_CLAMP_EN_MASK, + CS42L43_HSBIAS_SENSE_EN_MASK | + CS42L43_AUTO_HSBIAS_CLAMP_EN_MASK); } regmap_update_bits(cs42l43->regmap, CS42L43_MIC_DETECT_CONTROL_1, -- 2.39.2

2 2

[PATCH] ASoC: Intel: soc-acpi-intel-mtl-match: Change CS35L56 prefixes to AMPn
by Richard Fitzgerald 11 Dec '23

11 Dec '23

Change the ALSA prefix for the CS35L56 to "AMPn". This keeps them consistent with the CS35L56 HDA driver. It also avoids coding the chip ID into the control name, so that other Cirrus amps with the same controls can have the same control names. Signed-off-by: Richard Fitzgerald <rf(a)opensource.cirrus.com> Fixes: 05fe62842804 ("ASoC: Intel: soc-acpi-intel-mtl-match: add acpi match table for cdb35l56-eight-c") --- sound/soc/intel/common/soc-acpi-intel-mtl-match.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/soc/intel/common/soc-acpi-intel-mtl-match.c b/sound/soc/intel/common/soc-acpi-intel-mtl-match.c index f2c17cee1a5d..feb12c6c85d1 100644 --- a/sound/soc/intel/common/soc-acpi-intel-mtl-match.c +++ b/sound/soc/intel/common/soc-acpi-intel-mtl-match.c @@ -352,13 +352,13 @@ static const struct snd_soc_acpi_adr_device cs35l56_1_adr[] = { .adr = 0x00013701FA355601ull, .num_endpoints = 1, .endpoints = &spk_r_endpoint, - .name_prefix = "cs35l56-8" + .name_prefix = "AMP8" }, { .adr = 0x00013601FA355601ull, .num_endpoints = 1, .endpoints = &spk_3_endpoint, - .name_prefix = "cs35l56-7" + .name_prefix = "AMP7" } }; @@ -367,13 +367,13 @@ static const struct snd_soc_acpi_adr_device cs35l56_2_adr[] = { .adr = 0x00023301FA355601ull, .num_endpoints = 1, .endpoints = &spk_l_endpoint, - .name_prefix = "cs35l56-1" + .name_prefix = "AMP1" }, { .adr = 0x00023201FA355601ull, .num_endpoints = 1, .endpoints = &spk_2_endpoint, - .name_prefix = "cs35l56-2" + .name_prefix = "AMP2" } }; -- 2.30.2

2 1

[PATCH v7 00/13] Introduce STM32 Firewall framework
by Gatien Chevallier 11 Dec '23

11 Dec '23

Introduce STM32 Firewall framework for STM32MP1x and STM32MP2x platforms. STM32MP1x(ETZPC) and STM32MP2x(RIFSC) Firewall controllers register to the framework to offer firewall services such as access granting. This series of patches is a new approach on the previous STM32 system bus, history is available here: https://lore.kernel.org/lkml/20230127164040.1047583/ The need for such framework arises from the fact that there are now multiple hardware firewalls implemented across multiple products. Drivers are shared between different products, using the same code. When it comes to firewalls, the purpose mostly stays the same: Protect hardware resources. But the implementation differs, and there are multiple types of firewalls: peripheral, memory, ... Some hardware firewall controllers such as the RIFSC implemented on STM32MP2x platforms may require to take ownership of a resource before being able to use it, hence the requirement for firewall services to take/release the ownership of such resources. On the other hand, hardware firewall configurations are becoming more and more complex. These mecanisms prevent platform crashes or other firewall-related incoveniences by denying access to some resources. The stm32 firewall framework offers an API that is defined in firewall controllers drivers to best fit the specificity of each firewall. For every peripherals protected by either the ETZPC or the RIFSC, the firewall framework checks the firewall controlelr registers to see if the peripheral's access is granted to the Linux kernel. If not, the peripheral is configured as secure, the node is marked populated, so that the driver is not probed for that device. The firewall framework relies on the access-controller device tree binding. It is used by peripherals to reference a domain access controller. In this case a firewall controller. The bus uses the ID referenced by the access-controller property to know where to look in the firewall to get the security configuration for the peripheral. This allows a device tree description rather than a hardcoded peripheral table in the bus driver. The STM32 ETZPC device is responsible for filtering accesses based on security level, or co-processor isolation for any resource connected to it. The RIFSC is responsible for filtering accesses based on Compartment ID / security level / privilege level for any resource connected to it. STM32MP13/15/25 SoC device tree files are updated in this series to implement this mecanism. Changes in V7: - Separate indentation changes from access-controllers changes in the device tree file commits - Select OF_DYNAMIC when STM32_FIREWALL is set in order to use of_detach_node() in the firewall framework - Handle previously non-present RNG and HASH nodes in the STM32MP13 device tree file Changes in V6: - Rename access-controller to access-controllers - Remove access-controller-provider - Update device trees and other bindings accordingly - Rework ETZPC/RIFSC bindings to define what access-controllers cells contain inside #access-controller-cells - Some other minor fixes Changes in V5: - Integrate and rework the "feature-domains" binding patch in this patchset. The binding is renamed to "access-controller" - Rename every feature-domain* reference to access-control* ones - Correct loop bug and missing select STM32_FIREWALL in 32-bit platform Kconfig Changes in V4: - Fix typo in commit message and YAML check errors in "dt-bindings: Document common device controller bindings" Note: This patch should be ignored as stated in the cover letter. I've done this to avoid errors on this series of patch - Correct code syntax/style issues reported by Simon Horman - Added Jonathan's tag for IIO on the treewide patch Changes in V3: Change incorrect ordering for bindings commits leading to an error while running "make DT_CHECKER_FLAGS=-m dt_binding_check" Changes in V2: generic: - Add fw_devlink dependency for "feature-domains" property. bindings: - Corrected YAMLS errors highlighted by Rob's robot - Firewall controllers YAMLs no longer define the maxItems for the "feature-domains" property - Renamed st,stm32-rifsc.yaml to st,stm32mp25-rifsc.yaml - Fix examples in YAML files - Change feature-domains maxItems to 2 in firewall consumer files as there should not be more than 2 entries for now - Declare "feature-domain-names" as an optional property for firewall controllers child nodes. - Add missing "feature-domains" property declaration in bosch,m_can.yaml and st,stm32-cryp.yaml files firewall framework: - Support multiple entries for "feature-domains" property - Better handle the device-tree parsing using phandle+args APIs - Remove "resource firewall" type - Add a field for the name of the firewall entry - Fix licenses RIFSC: - Add controller name - Driver is now a module_platform_driver - Fix license ETZPC: - Add controller name - Driver is now a module_platform_driver - Fix license Device trees: - Fix rifsc node name - Move the "ranges" property under the "feature-domains" one Gatien Chevallier (12): dt-bindings: treewide: add access-controllers description dt-bindings: bus: document RIFSC dt-bindings: bus: document ETZPC firewall: introduce stm32_firewall framework of: property: fw_devlink: Add support for "access-controller" bus: rifsc: introduce RIFSC firewall controller driver arm64: dts: st: add RIFSC as an access controller for STM32MP25x boards bus: etzpc: introduce ETZPC firewall controller driver ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards ARM: dts: stm32: put ETZPC as an access controller for STM32MP15x boards ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards ARM: dts: stm32: put ETZPC as an access controller for STM32MP13x boards Oleksii Moisieiev (1): dt-bindings: document generic access controllers .../access-controllers.yaml | 84 + .../bindings/bus/st,stm32-etzpc.yaml | 87 + .../bindings/bus/st,stm32mp25-rifsc.yaml | 96 + .../bindings/crypto/st,stm32-cryp.yaml | 4 + .../bindings/crypto/st,stm32-hash.yaml | 4 + .../devicetree/bindings/dma/st,stm32-dma.yaml | 4 + .../bindings/dma/st,stm32-dmamux.yaml | 4 + .../devicetree/bindings/i2c/st,stm32-i2c.yaml | 4 + .../bindings/iio/adc/st,stm32-adc.yaml | 4 + .../bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 4 + .../bindings/iio/dac/st,stm32-dac.yaml | 4 + .../bindings/media/cec/st,stm32-cec.yaml | 4 + .../bindings/media/st,stm32-dcmi.yaml | 4 + .../memory-controllers/st,stm32-fmc2-ebi.yaml | 4 + .../bindings/mfd/st,stm32-lptimer.yaml | 4 + .../bindings/mfd/st,stm32-timers.yaml | 4 + .../devicetree/bindings/mmc/arm,pl18x.yaml | 4 + .../bindings/net/can/bosch,m_can.yaml | 4 + .../devicetree/bindings/net/stm32-dwmac.yaml | 4 + .../bindings/phy/phy-stm32-usbphyc.yaml | 4 + .../bindings/regulator/st,stm32-vrefbuf.yaml | 4 + .../devicetree/bindings/rng/st,stm32-rng.yaml | 4 + .../bindings/serial/st,stm32-uart.yaml | 4 + .../bindings/sound/st,stm32-i2s.yaml | 4 + .../bindings/sound/st,stm32-sai.yaml | 4 + .../bindings/sound/st,stm32-spdifrx.yaml | 4 + .../bindings/spi/st,stm32-qspi.yaml | 4 + .../devicetree/bindings/spi/st,stm32-spi.yaml | 4 + .../devicetree/bindings/usb/dwc2.yaml | 4 + MAINTAINERS | 7 + arch/arm/boot/dts/st/stm32mp131.dtsi | 1063 ++++--- arch/arm/boot/dts/st/stm32mp133.dtsi | 51 +- arch/arm/boot/dts/st/stm32mp13xc.dtsi | 19 +- arch/arm/boot/dts/st/stm32mp13xf.dtsi | 19 +- arch/arm/boot/dts/st/stm32mp151.dtsi | 2756 +++++++++-------- arch/arm/boot/dts/st/stm32mp153.dtsi | 52 +- arch/arm/boot/dts/st/stm32mp15xc.dtsi | 19 +- arch/arm/mach-stm32/Kconfig | 1 + arch/arm64/Kconfig.platforms | 1 + arch/arm64/boot/dts/st/stm32mp251.dtsi | 6 +- drivers/bus/Kconfig | 10 + drivers/bus/Makefile | 1 + drivers/bus/stm32_etzpc.c | 141 + drivers/bus/stm32_firewall.c | 294 ++ drivers/bus/stm32_firewall.h | 83 + drivers/bus/stm32_rifsc.c | 252 ++ drivers/of/property.c | 2 + include/linux/bus/stm32_firewall_device.h | 141 + 48 files changed, 3351 insertions(+), 1938 deletions(-) create mode 100644 Documentation/devicetree/bindings/access-controllers/access-controllers.yaml create mode 100644 Documentation/devicetree/bindings/bus/st,stm32-etzpc.yaml create mode 100644 Documentation/devicetree/bindings/bus/st,stm32mp25-rifsc.yaml create mode 100644 drivers/bus/stm32_etzpc.c create mode 100644 drivers/bus/stm32_firewall.c create mode 100644 drivers/bus/stm32_firewall.h create mode 100644 drivers/bus/stm32_rifsc.c create mode 100644 include/linux/bus/stm32_firewall_device.h -- 2.35.3

1 14

[RFC, PATCH 1/2] ASoC: qcom: sdw: Add TDM support
by Jianhua Lu 11 Dec '23

11 Dec '23

Add qcom TDM setup function to support TDM ports for qcom platform. Signed-off-by: Jianhua Lu <lujianhua000(a)gmail.com> --- sound/soc/qcom/sdw.c | 64 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 64 insertions(+) diff --git a/sound/soc/qcom/sdw.c b/sound/soc/qcom/sdw.c index 77dbe0c28b29..267a8cff01a4 100644 --- a/sound/soc/qcom/sdw.c +++ b/sound/soc/qcom/sdw.c @@ -4,6 +4,7 @@ #include <dt-bindings/sound/qcom,q6afe.h> #include <linux/module.h> +#include <sound/pcm_params.h> #include <sound/soc.h> #include "sdw.h" @@ -101,6 +102,66 @@ int qcom_snd_sdw_prepare(struct snd_pcm_substream *substream, } EXPORT_SYMBOL_GPL(qcom_snd_sdw_prepare); +static int qcom_snd_tdm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream); + struct snd_soc_dai *cpu_dai = snd_soc_rtd_to_cpu(rtd, 0); + unsigned int tdm_slot_offset[8] = { 0, 4, 8, 12, 16, 20, 24, 28 }; + int channels, slot_width; + int ret; + + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + slot_width = 16; + break; + case SNDRV_PCM_FORMAT_S24_LE: + slot_width = 24; + break; + case SNDRV_PCM_FORMAT_S32_LE: + slot_width = 32; + break; + default: + dev_err(rtd->dev, "%s: invalid param format 0x%x\n", __func__, + params_format(params)); + return -EINVAL; + } + + channels = params_channels(params); + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + ret = snd_soc_dai_set_tdm_slot(cpu_dai, 0, 0x3, 8, slot_width); + if (ret < 0) { + dev_err(rtd->dev, "%s: failed to set tdm slot, err:%d\n", + __func__, ret); + return ret; + } + + ret = snd_soc_dai_set_channel_map(cpu_dai, 0, NULL, channels, + tdm_slot_offset); + if (ret < 0) { + dev_err(rtd->dev, "%s: failed to set channel map, err:%d\n", + __func__, ret); + return ret; + } + } else { + ret = snd_soc_dai_set_tdm_slot(cpu_dai, 0xf, 0, 8, slot_width); + if (ret < 0) { + dev_err(rtd->dev, "%s: failed to set tdm slot, err:%d\n", + __func__, ret); + return ret; + } + + ret = snd_soc_dai_set_channel_map(cpu_dai, channels, + tdm_slot_offset, 0, NULL); + if (ret < 0) { + dev_err(rtd->dev, "%s: failed to set channel map, err:%d\n", + __func__, ret); + return ret; + } + } +} +EXPORT_SYMBOL_GPL(qcom_snd_tdm_hw_params); + int qcom_snd_sdw_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, struct sdw_stream_runtime **psruntime) @@ -125,6 +186,9 @@ int qcom_snd_sdw_hw_params(struct snd_pcm_substream *substream, *psruntime = sruntime; } break; + case PRIMARY_TDM_RX_0...QUINARY_TDM_TX_7: + qcom_snd_tdm_hw_params(substream, params); + break; } return 0; -- 2.41.0

2 3

[PATCH] ASoC: codec: wsa884x: make use of new mute_unmute_on_trigger flag
by Neil Armstrong 11 Dec '23

11 Dec '23

This fix is based on commit [1] fixing click and pop sounds during SoundWire port start because PA is left unmuted. making use of new mute_unmute_on_trigger flag and removing unmute at PA setup, removes the Click/Pop issue at SoundWire enable. [1] 805ce81826c8 ("ASoC: codecs: wsa883x: make use of new mute_unmute_on_trigger flag") Cc: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> Fixes: aa21a7d4f68a ("ASoC: codecs: wsa884x: Add WSA884x family of speakers") Signed-off-by: Neil Armstrong <neil.armstrong(a)linaro.org> --- sound/soc/codecs/wsa884x.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/sound/soc/codecs/wsa884x.c b/sound/soc/codecs/wsa884x.c index 993d76b18b53..f2653df84e4a 100644 --- a/sound/soc/codecs/wsa884x.c +++ b/sound/soc/codecs/wsa884x.c @@ -1654,15 +1654,9 @@ static int wsa884x_spkr_event(struct snd_soc_dapm_widget *w, snd_soc_component_write_field(component, WSA884X_PDM_WD_CTL, WSA884X_PDM_WD_CTL_PDM_WD_EN_MASK, 0x1); - snd_soc_component_write_field(component, WSA884X_PA_FSM_EN, - WSA884X_PA_FSM_EN_GLOBAL_PA_EN_MASK, - 0x1); break; case SND_SOC_DAPM_PRE_PMD: - snd_soc_component_write_field(component, WSA884X_PA_FSM_EN, - WSA884X_PA_FSM_EN_GLOBAL_PA_EN_MASK, - 0x0); snd_soc_component_write_field(component, WSA884X_PDM_WD_CTL, WSA884X_PDM_WD_CTL_PDM_WD_EN_MASK, 0x0); @@ -1786,6 +1780,7 @@ static const struct snd_soc_dai_ops wsa884x_dai_ops = { .hw_free = wsa884x_hw_free, .mute_stream = wsa884x_mute_stream, .set_stream = wsa884x_set_stream, + .mute_unmute_on_trigger = true, }; static struct snd_soc_dai_driver wsa884x_dais[] = { --- base-commit: bbd220ce4e29ed55ab079007cff0b550895258eb change-id: 20231211-topic-sm8x50-upstream-wsa884x-fix-plop-a7a7ca7ec21c Best regards, -- Neil Armstrong <neil.armstrong(a)linaro.org>

3 2

[PATCH v2 1/3] ASoC: qcom: audioreach: Commonize setting channel mappings
by Krzysztof Kozlowski 11 Dec '23

11 Dec '23

Move code assigning channel mapping values to a common helper function. This simplifies three out of four cases, with the last case using incompatible type (uint16_t array instead of uint8_t array). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- Changes in v2: 1. New patch --- sound/soc/qcom/qdsp6/audioreach.c | 35 ++++++++++++++----------------- 1 file changed, 16 insertions(+), 19 deletions(-) diff --git a/sound/soc/qcom/qdsp6/audioreach.c b/sound/soc/qcom/qdsp6/audioreach.c index 5974c7929dd3..3db5ff367a29 100644 --- a/sound/soc/qcom/qdsp6/audioreach.c +++ b/sound/soc/qcom/qdsp6/audioreach.c @@ -267,6 +267,16 @@ void *audioreach_alloc_apm_cmd_pkt(int pkt_size, uint32_t opcode, uint32_t token } EXPORT_SYMBOL_GPL(audioreach_alloc_apm_cmd_pkt); +static void audioreach_set_channel_mapping(u8 *ch_map, int num_channels) +{ + if (num_channels == 1) { + ch_map[0] = PCM_CHANNEL_L; + } else if (num_channels == 2) { + ch_map[0] = PCM_CHANNEL_L; + ch_map[1] = PCM_CHANNEL_R; + } +} + static void apm_populate_container_config(struct apm_container_obj *cfg, struct audioreach_container *cont) { @@ -864,12 +874,8 @@ static int audioreach_set_compr_media_format(struct media_format *media_fmt_hdr, mp3_cfg->endianness = PCM_LITTLE_ENDIAN; mp3_cfg->num_channels = mcfg->num_channels; - if (mcfg->num_channels == 1) { - mp3_cfg->channel_mapping[0] = PCM_CHANNEL_L; - } else if (mcfg->num_channels == 2) { - mp3_cfg->channel_mapping[0] = PCM_CHANNEL_L; - mp3_cfg->channel_mapping[1] = PCM_CHANNEL_R; - } + audioreach_set_channel_mapping(mp3_cfg->channel_mapping, + mcfg->num_channels); break; case SND_AUDIOCODEC_AAC: media_fmt_hdr->data_format = DATA_FORMAT_RAW_COMPRESSED; @@ -1089,13 +1095,8 @@ static int audioreach_pcm_set_media_format(struct q6apm_graph *graph, media_cfg->q_factor = mcfg->bit_width - 1; media_cfg->bits_per_sample = mcfg->bit_width; - if (num_channels == 1) { - media_cfg->channel_mapping[0] = PCM_CHANNEL_L; - } else if (num_channels == 2) { - media_cfg->channel_mapping[0] = PCM_CHANNEL_L; - media_cfg->channel_mapping[1] = PCM_CHANNEL_R; - - } + audioreach_set_channel_mapping(media_cfg->channel_mapping, + num_channels); rc = q6apm_send_cmd_sync(graph->apm, pkt, 0); @@ -1153,12 +1154,8 @@ static int audioreach_shmem_set_media_format(struct q6apm_graph *graph, cfg->endianness = PCM_LITTLE_ENDIAN; cfg->num_channels = mcfg->num_channels; - if (mcfg->num_channels == 1) - cfg->channel_mapping[0] = PCM_CHANNEL_L; - else if (num_channels == 2) { - cfg->channel_mapping[0] = PCM_CHANNEL_L; - cfg->channel_mapping[1] = PCM_CHANNEL_R; - } + audioreach_set_channel_mapping(cfg->channel_mapping, + num_channels); } else { rc = audioreach_set_compr_media_format(header, p, mcfg); if (rc) { -- 2.34.1

2 3

[PATCH 1/4] ASoC: dt-bindings: qcom,lpass-rx-macro: Add SM8650 LPASS RX
by Krzysztof Kozlowski 11 Dec '23

11 Dec '23

Add bindings for Qualcomm SM8650 Low Power Audio SubSystem (LPASS) RX macro codec, which looks like compatible with earlier SM8550. Cc: Neil Armstrong <neil.armstrong(a)linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- .../bindings/sound/qcom,lpass-rx-macro.yaml | 21 ++++++++++++------- 1 file changed, 13 insertions(+), 8 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml index ec4b0ac8ad68..cbc36646100f 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml @@ -11,12 +11,16 @@ maintainers: properties: compatible: - enum: - - qcom,sc7280-lpass-rx-macro - - qcom,sm8250-lpass-rx-macro - - qcom,sm8450-lpass-rx-macro - - qcom,sm8550-lpass-rx-macro - - qcom,sc8280xp-lpass-rx-macro + oneOf: + - enum: + - qcom,sc7280-lpass-rx-macro + - qcom,sm8250-lpass-rx-macro + - qcom,sm8450-lpass-rx-macro + - qcom,sm8550-lpass-rx-macro + - qcom,sc8280xp-lpass-rx-macro + - items: + - const: qcom,sm8650-lpass-rx-macro + - const: qcom,sm8550-lpass-rx-macro reg: maxItems: 1 @@ -96,8 +100,9 @@ allOf: - if: properties: compatible: - enum: - - qcom,sm8550-lpass-rx-macro + contains: + enum: + - qcom,sm8550-lpass-rx-macro then: properties: clocks: -- 2.34.1

3 7

[PATCH AUTOSEL 4.14 1/5] ASoC: cs43130: Fix the position of const qualifier
by Sasha Levin 11 Dec '23

11 Dec '23

From: Maciej Strozek <mstrozek(a)opensource.cirrus.com> [ Upstream commit e7f289a59e76a5890a57bc27b198f69f175f75d9 ] Signed-off-by: Maciej Strozek <mstrozek(a)opensource.cirrus.com> Acked-by: Charles Keepax <ckeepax(a)opensource.cirrus.com> Link: https://lore.kernel.org/r/20231117141344.64320-2-mstrozek@opensource.cirrus… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/codecs/cs43130.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/cs43130.c b/sound/soc/codecs/cs43130.c index 643e37fc218e1..793496e8d262d 100644 --- a/sound/soc/codecs/cs43130.c +++ b/sound/soc/codecs/cs43130.c @@ -1675,7 +1675,7 @@ static ssize_t cs43130_show_dc_r(struct device *dev, return cs43130_show_dc(dev, buf, HP_RIGHT); } -static u16 const cs43130_ac_freq[CS43130_AC_FREQ] = { +static const u16 cs43130_ac_freq[CS43130_AC_FREQ] = { 24, 43, 93, @@ -2351,7 +2351,7 @@ static const struct regmap_config cs43130_regmap = { .use_single_rw = true, /* needed for regcache_sync */ }; -static u16 const cs43130_dc_threshold[CS43130_DC_THRESHOLD] = { +static const u16 cs43130_dc_threshold[CS43130_DC_THRESHOLD] = { 50, 120, }; -- 2.42.0

1 1

[PATCH AUTOSEL 4.19 1/7] ASoC: Intel: Skylake: mem leak in skl register function
by Sasha Levin 11 Dec '23

11 Dec '23

From: Kamil Duljas <kamil.duljas(a)gmail.com> [ Upstream commit f8ba14b780273fd290ddf7ee0d7d7decb44cc365 ] skl_platform_register() uses krealloc. When krealloc is fail, then previous memory is not freed. The leak is also when soc component registration failed. Signed-off-by: Kamil Duljas <kamil.duljas(a)gmail.com> Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski(a)linux.intel.com> Link: https://lore.kernel.org/r/20231116224112.2209-2-kamil.duljas@gmail.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/intel/skylake/skl-pcm.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/sound/soc/intel/skylake/skl-pcm.c b/sound/soc/intel/skylake/skl-pcm.c index 6b2c8c6e7a00f..5195e012dc6d4 100644 --- a/sound/soc/intel/skylake/skl-pcm.c +++ b/sound/soc/intel/skylake/skl-pcm.c @@ -1450,6 +1450,7 @@ int skl_platform_register(struct device *dev) dais = krealloc(skl->dais, sizeof(skl_fe_dai) + sizeof(skl_platform_dai), GFP_KERNEL); if (!dais) { + kfree(skl->dais); ret = -ENOMEM; goto err; } @@ -1462,8 +1463,10 @@ int skl_platform_register(struct device *dev) ret = devm_snd_soc_register_component(dev, &skl_component, skl->dais, num_dais); - if (ret) + if (ret) { + kfree(skl->dais); dev_err(dev, "soc component registration failed %d\n", ret); + } err: return ret; } -- 2.42.0

1 2