October 2023 - Alsa-devel - mailman.alsa-project.org

[PATCH v3 1/2] ASoC: dt-bindings: sound-card-common: List DAPM endpoints ignoring system suspend
by Chancel Liu 16 Oct '23

16 Oct '23

Add a property to list DAPM endpoints which mark paths between these endpoints should not be disabled when system enters in suspend state. LPA means low power audio case. For example on asymmetric multiprocessor, there are Cortex-A core and Cortex-M core, Linux is running on Cortex-A core, RTOS or other OS is running on Cortex-M core. The audio hardware devices can be controlled by Cortex-M. LPA can be explained as a mechanism that Cortex-A allocates a large buffer and fill audio data, then Cortex-A can enter into suspend for the purpose of power saving. Cortex-M continues to play the sound during suspend phase of Cortex-A. LPA requires some audio paths still enabled when Cortex-A enters into suspend. Signed-off-by: Chancel Liu <chancel.liu(a)nxp.com> --- .../bindings/sound/sound-card-common.yaml | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/sound-card-common.yaml b/Documentation/devicetree/bindings/sound/sound-card-common.yaml index 3a941177f684..f43147c78651 100644 --- a/Documentation/devicetree/bindings/sound/sound-card-common.yaml +++ b/Documentation/devicetree/bindings/sound/sound-card-common.yaml @@ -17,6 +17,20 @@ properties: pair of strings, the first being the connection's sink, the second being the connection's source. + lpa-widgets: + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + description: | + A list of DAPM endpoints which mark paths between these endpoints should + not be disabled when system enters in suspend state. LPA means low power + audio case. For example on asymmetric multiprocessor, there are Cortex-A + core and Cortex-M core, Linux is running on Cortex-A core, RTOS or other + OS is running on Cortex-M core. The audio hardware devices can be + controlled by Cortex-M. LPA can be explained as a mechanism that Cortex-A + allocates a large buffer and fill audio data, then Cortex-A can enter + into suspend for the purpose of power saving. Cortex-M continues to play + the sound during suspend phase of Cortex-A. LPA requires some audio paths + still enabled when Cortex-A enters into suspend. + model: $ref: /schemas/types.yaml#/definitions/string description: User specified audio sound card name -- 2.25.1

3 5

[PATCH V1 0/3] ASoC: codecs: Add aw88399 amplifier driver
by wangweidong.a＠awinic.com 16 Oct '23

16 Oct '23

From: Weidong Wang <wangweidong.a(a)awinic.com> Add the awinic,aw88399 property to the awinic,aw88395.yaml file. Add i2c and amplifier registration for aw88399 and their associated operation functions. Weidong Wang (3): ASoC: dt-bindings: Add schema for "awinic,aw88399" ASoC: codecs: Add code for bin parsing compatible with aw88399 ASoC: codecs: Add aw88399 amplifier driver .../bindings/sound/awinic,aw88395.yaml | 1 + sound/soc/codecs/Kconfig | 14 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/aw88395/aw88395_lib.c | 3 + sound/soc/codecs/aw88395/aw88395_reg.h | 1 + sound/soc/codecs/aw88399.c | 1964 +++++++++++++++++ sound/soc/codecs/aw88399.h | 615 ++++++ 7 files changed, 2600 insertions(+) create mode 100644 sound/soc/codecs/aw88399.c create mode 100644 sound/soc/codecs/aw88399.h base-commit: ce583d5fb9d3f4e20473b9d5619d51ea3cc92283 -- 2.41.0

4 12

[PATCH] soundwire: dmi-quirks: update HP Omen match
by Bard Liao 16 Oct '23

16 Oct '23

From: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> New platforms have a slightly different DMI product name, remove trailing characters/digits to handle all cases Closes: https://github.com/thesofproject/linux/issues/4611 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Rander Wang <rander.wang(a)intel.com> Signed-off-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> --- drivers/soundwire/dmi-quirks.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/soundwire/dmi-quirks.c b/drivers/soundwire/dmi-quirks.c index 2a1096dab63d..9ebdd0cd0b1c 100644 --- a/drivers/soundwire/dmi-quirks.c +++ b/drivers/soundwire/dmi-quirks.c @@ -141,7 +141,7 @@ static const struct dmi_system_id adr_remap_quirk_table[] = { { .matches = { DMI_MATCH(DMI_SYS_VENDOR, "HP"), - DMI_MATCH(DMI_PRODUCT_NAME, "OMEN by HP Gaming Laptop 16-k0xxx"), + DMI_MATCH(DMI_PRODUCT_NAME, "OMEN by HP Gaming Laptop 16"), }, .driver_data = (void *)hp_omen_16, }, -- 2.25.1

2 1

[PATCH] soundwire: bus: improve error handling for clock stop prepare/deprepare
by Bard Liao 16 Oct '23

16 Oct '23

From: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> The same logic is used for clock stop prepare and deprepare, and having different logs for the two steps helps identify problems. In addition, when the "NotFinished" bit remains set, the error handling is not quite right: a) for the clock stop prepare, the error is handled at the caller level, and the error is ignored: there's no good reason to prevent the pm_runtime suspend from happening. Throwing an error that is later ignored is confusing. b) for the clock stop deprepare, the error is ignored in bus.c and a dev_warn() log shown. Throwing an error is also alarming users for no good reason. For both cases, demoting the error to dev_dbg() makes more sense. Link: https://github.com/thesofproject/linux/issues/4619 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Rander Wang <rander.wang(a)intel.com> Reviewed-by: Richard Fitzgerald <rf(a)opensource.cirrus.com> Signed-off-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> --- drivers/soundwire/bus.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c index 1720031f35a3..327ce316fed9 100644 --- a/drivers/soundwire/bus.c +++ b/drivers/soundwire/bus.c @@ -1022,7 +1022,7 @@ static int sdw_slave_clk_stop_prepare(struct sdw_slave *slave, return ret; } -static int sdw_bus_wait_for_clk_prep_deprep(struct sdw_bus *bus, u16 dev_num) +static int sdw_bus_wait_for_clk_prep_deprep(struct sdw_bus *bus, u16 dev_num, bool prepare) { int retry = bus->clk_stop_timeout; int val; @@ -1036,7 +1036,8 @@ static int sdw_bus_wait_for_clk_prep_deprep(struct sdw_bus *bus, u16 dev_num) } val &= SDW_SCP_STAT_CLK_STP_NF; if (!val) { - dev_dbg(bus->dev, "clock stop prep/de-prep done slave:%d\n", + dev_dbg(bus->dev, "clock stop %s done slave:%d\n", + prepare ? "prepare" : "deprepare", dev_num); return 0; } @@ -1045,7 +1046,8 @@ static int sdw_bus_wait_for_clk_prep_deprep(struct sdw_bus *bus, u16 dev_num) retry--; } while (retry); - dev_err(bus->dev, "clock stop prep/de-prep failed slave:%d\n", + dev_dbg(bus->dev, "clock stop %s did not complete for slave:%d\n", + prepare ? "prepare" : "deprepare", dev_num); return -ETIMEDOUT; @@ -1116,7 +1118,7 @@ int sdw_bus_prep_clk_stop(struct sdw_bus *bus) */ if (!simple_clk_stop) { ret = sdw_bus_wait_for_clk_prep_deprep(bus, - SDW_BROADCAST_DEV_NUM); + SDW_BROADCAST_DEV_NUM, true); /* * if there are no Slave devices present and the reply is * Command_Ignored/-ENODATA, we don't need to continue with the @@ -1236,7 +1238,7 @@ int sdw_bus_exit_clk_stop(struct sdw_bus *bus) * state machine */ if (!simple_clk_stop) { - ret = sdw_bus_wait_for_clk_prep_deprep(bus, SDW_BROADCAST_DEV_NUM); + ret = sdw_bus_wait_for_clk_prep_deprep(bus, SDW_BROADCAST_DEV_NUM, false); if (ret < 0) dev_warn(bus->dev, "clock stop deprepare wait failed:%d\n", ret); } -- 2.25.1

2 1

[PATCH v4 00/42] ep93xx device tree conversion
by Nikita Shubin via B4 Relay 16 Oct '23

16 Oct '23

This series aims to convert ep93xx from platform to full device tree support. The main goal is to receive ACK's to take it via Arnd's arm-soc branch. Major changes: - drop newline at the end from each YAML files - rename dma and clk bindings headers to match first compatible - shrink SoC exported functions number to only 2 - dropped some ep93xx_pata fixes from these series - dropped m48t86 stuff from these series Bit thanks to Andy Shevchenko for thorough review. Some parts are were sent in advance, so these series depends on the following: Link: https://lore.kernel.org/all/20230823-m48t86_device_tree-v2-0-21ff275f949d@m… Link: https://lore.kernel.org/all/20230823-ep93xx_pata_fixes-v1-0-d7e7229be148@ma… --- Changes in v4: - gpio: ep93xx: split device in multiple - s/generic_handle_irq/generic_handle_domain_irq/ - s/int offset/irq_hw_number_t offset/ though now it looks a bit odd to me - drop i = 0 - drop 'error' - use dev_err_probe withour printing devname once again dt-bindings: clock: Add Cirrus EP93xx - renamed cirrus,ep93xx-clock.h -> cirrus,ep9301-clk.h clk: ep93xx: add DT support for Cirrus EP93xx - drop unused includes - use .name only for xtali, pll1, pll2 parents - convert // to /* - pass clk_parent_data instead of char* clock name dt-bindings: pinctrl: Add Cirrus EP93xx - s/additionalProperties/unevaluatedProperties/ dt-bindings: soc: Add Cirrus EP93xx - move syscon to soc directory - add vendor prefix - make reboot same style as pinctrl, clk - use absolute path for ref - expand example soc: Add SoC driver for Cirrus ep93xx - s/0xf0000000/GENMASK(31, 28)/ - s/ret/ep93xx_chip_revision(map)/ - drop symbol exports - convert to platform driver dt-bindings: rtc: Add Cirrus EP93xx - allOf: with $ref to rtc.yaml - s/additionalProperties/unevaluatedProperties/ dt-bindings: watchdog: Add Cirrus EP93x - drop description - reword power: reset: Add a driver for the ep93xx reset - lets use 'GPL-2.0+' instead of '(GPL-2.0)' - s/of_device/of/ - drop mdelay with warning - return 0 at the end net: cirrus: add DT support for Cirrus EP93xx - fix leaking np mtd: nand: add support for ts72xx - +bits.h - drop comment - ok to fwnode_get_next_child_node - use goto to put handle and nand and report error ARM: dts: add Cirrus EP93XX SoC .dtsi - add simple-bus for ebi, as we don't require to setup anything - add arm,pl011 compatible to uart nodes - drop i2c-gpio, as it's isn't used anywhere ARM: dts: ep93xx: add ts7250 board - generic node name for temperature-sensor - drop i2c - move nand, rtc, watchdog to ebi node - Link to v3: https://lore.kernel.org/r/20230605-ep93xx-v3-0-3d63a5f1103e@maquefel.me --- Alexander Sverdlin (2): ARM: dts: ep93xx: Add EDB9302 DT ASoC: cirrus: edb93xx: Delete driver Nikita Shubin (40): gpio: ep93xx: split device in multiple ARM: ep93xx: add swlocked prototypes dt-bindings: clock: Add Cirrus EP93xx clk: ep93xx: add DT support for Cirrus EP93xx dt-bindings: pinctrl: Add Cirrus EP93xx pinctrl: add a Cirrus ep93xx SoC pin controller dt-bindings: power: reset: Add ep93xx reset power: reset: Add a driver for the ep93xx reset dt-bindings: soc: Add Cirrus EP93xx soc: Add SoC driver for Cirrus ep93xx dt-bindings: timers: Add Cirrus EP93xx clocksource: ep93xx: Add driver for Cirrus Logic EP93xx dt-bindings: rtc: Add Cirrus EP93xx rtc: ep93xx: add DT support for Cirrus EP93xx dt-bindings: watchdog: Add Cirrus EP93x watchdog: ep93xx: add DT support for Cirrus EP93xx dt-bindings: pwm: Add Cirrus EP93xx pwm: ep93xx: add DT support for Cirrus EP93xx dt-bindings: spi: Add Cirrus EP93xx spi: ep93xx: add DT support for Cirrus EP93xx dt-bindings: net: Add Cirrus EP93xx net: cirrus: add DT support for Cirrus EP93xx dt-bindings: dma: Add Cirrus EP93xx dma: cirrus: add DT support for Cirrus EP93xx dt-bindings: mtd: Add ts7200 nand-controller mtd: nand: add support for ts72xx dt-bindings: ata: Add Cirrus EP93xx ata: pata_ep93xx: add device tree support dt-bindings: input: Add Cirrus EP93xx keypad input: keypad: ep93xx: add DT support for Cirrus EP93xx dt-bindings: wdt: Add ts72xx wdt: ts72xx: add DT support for ts72xx gpio: ep93xx: add DT support for gpio-ep93xx ARM: dts: add Cirrus EP93XX SoC .dtsi ARM: dts: ep93xx: add ts7250 board ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms pwm: ep93xx: drop legacy pinctrl ata: pata_ep93xx: remove legacy pinctrl use ARM: ep93xx: delete all boardfiles ARM: ep93xx: soc: drop defines .../bindings/arm/cirrus/cirrus,ep9301.yaml | 38 + .../bindings/ata/cirrus,ep9312-pata.yaml | 42 + .../bindings/clock/cirrus,ep9301-clk.yaml | 46 + .../bindings/dma/cirrus,ep9301-dma-m2m.yaml | 69 + .../bindings/dma/cirrus,ep9301-dma-m2p.yaml | 121 ++ .../bindings/input/cirrus,ep9307-keypad.yaml | 87 ++ .../devicetree/bindings/mtd/technologic,nand.yaml | 45 + .../devicetree/bindings/net/cirrus,ep9301-eth.yaml | 59 + .../bindings/pinctrl/cirrus,ep9301-pinctrl.yaml | 57 + .../bindings/power/reset/cirrus,ep9301-reboot.yaml | 34 + .../devicetree/bindings/pwm/cirrus,ep9301-pwm.yaml | 46 + .../devicetree/bindings/rtc/cirrus,ep9301-rtc.yaml | 42 + .../bindings/soc/cirrus/cirrus,ep9301-syscon.yaml | 71 + .../devicetree/bindings/spi/cirrus,ep9301-spi.yaml | 61 + .../bindings/timer/cirrus,ep9301-timer.yaml | 49 + .../bindings/watchdog/cirrus,ep9301-wdt.yaml | 42 + .../bindings/watchdog/technologic,ts7200-wdt.yaml | 45 + arch/arm/Makefile | 1 - arch/arm/boot/dts/cirrus/Makefile | 4 + arch/arm/boot/dts/cirrus/ep93xx-bk3.dts | 124 ++ arch/arm/boot/dts/cirrus/ep93xx-edb9302.dts | 180 +++ arch/arm/boot/dts/cirrus/ep93xx-ts7250.dts | 143 ++ arch/arm/boot/dts/cirrus/ep93xx.dtsi | 454 +++++++ arch/arm/mach-ep93xx/Kconfig | 20 +- arch/arm/mach-ep93xx/Makefile | 11 - arch/arm/mach-ep93xx/clock.c | 733 ---------- arch/arm/mach-ep93xx/core.c | 1017 -------------- arch/arm/mach-ep93xx/dma.c | 114 -- arch/arm/mach-ep93xx/edb93xx.c | 344 ----- arch/arm/mach-ep93xx/ep93xx-regs.h | 38 - arch/arm/mach-ep93xx/gpio-ep93xx.h | 111 -- arch/arm/mach-ep93xx/hardware.h | 25 - arch/arm/mach-ep93xx/irqs.h | 76 -- arch/arm/mach-ep93xx/platform.h | 42 - arch/arm/mach-ep93xx/soc.h | 212 --- arch/arm/mach-ep93xx/ts72xx.c | 422 ------ arch/arm/mach-ep93xx/ts72xx.h | 94 -- arch/arm/mach-ep93xx/vision_ep9307.c | 311 ----- drivers/ata/pata_ep93xx.c | 33 +- drivers/clk/Kconfig | 8 + drivers/clk/Makefile | 1 + drivers/clk/clk-ep93xx.c | 753 +++++++++++ drivers/clocksource/Kconfig | 11 + drivers/clocksource/Makefile | 1 + .../clocksource}/timer-ep93xx.c | 155 ++- drivers/dma/ep93xx_dma.c | 125 +- drivers/gpio/gpio-ep93xx.c | 331 ++--- drivers/input/keyboard/ep93xx_keypad.c | 74 +- drivers/mtd/nand/raw/Kconfig | 7 + drivers/mtd/nand/raw/Makefile | 1 + drivers/mtd/nand/raw/technologic-nand-controller.c | 166 +++ drivers/net/ethernet/cirrus/ep93xx_eth.c | 63 +- drivers/pinctrl/Kconfig | 7 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-ep93xx.c | 1429 ++++++++++++++++++++ drivers/power/reset/Kconfig | 10 + drivers/power/reset/Makefile | 1 + drivers/power/reset/ep93xx-restart.c | 85 ++ drivers/pwm/pwm-ep93xx.c | 26 +- drivers/rtc/rtc-ep93xx.c | 8 + drivers/soc/Kconfig | 1 + drivers/soc/Makefile | 1 + drivers/soc/cirrus/Kconfig | 12 + drivers/soc/cirrus/Makefile | 2 + drivers/soc/cirrus/soc-ep93xx.c | 215 +++ drivers/spi/spi-ep93xx.c | 28 +- drivers/watchdog/ep93xx_wdt.c | 8 + drivers/watchdog/ts72xx_wdt.c | 8 + include/dt-bindings/clock/cirrus,ep9301-clk.h | 41 + include/dt-bindings/dma/cirrus,ep93xx-dma.h | 26 + include/linux/platform_data/dma-ep93xx.h | 25 +- include/linux/platform_data/eth-ep93xx.h | 10 - include/linux/platform_data/keypad-ep93xx.h | 32 - include/linux/soc/cirrus/ep93xx.h | 29 +- sound/soc/cirrus/Kconfig | 9 - sound/soc/cirrus/Makefile | 4 - sound/soc/cirrus/edb93xx.c | 117 -- 77 files changed, 5126 insertions(+), 4168 deletions(-) --- base-commit: bdc09c8e8b16d494ccd1c56e903e78dd76455a35 change-id: 20230605-ep93xx-01c76317e2d2 Best regards, -- Nikita Shubin <nikita.shubin(a)maquefel.me>

4 4

Use stdint.h types
by GitHub pull_request - opened 15 Oct '23

15 Oct '23

alsa-project/alsa-firmware pull request #10 was opened from thesamesam: u_int_* aren't standard, but uint* are. Use those instead for musl compat. Bug: https://bugs.gentoo.org/832969 Request URL : https://github.com/alsa-project/alsa-firmware/pull/10 Patch URL : https://github.com/alsa-project/alsa-firmware/pull/10.patch Repository URL: https://github.com/alsa-project/alsa-firmware

1 0

[PATCH] ASoC: dwc: Fix non-DT instantiation
by Mark Brown 13 Oct '23

13 Oct '23

Commit d6d6c513f5d2 ("ASoC: dwc: Use ops to get platform data") converted the DesignWare I2S driver to use a DT specific function to obtain platform data but this breaks at least non-DT systems such as AMD. Revert it. Fixes: d6d6c513f5d2 ("ASoC: dwc: Use ops to get platform data") Signed-off-by: Mark Brown <broonie(a)kernel.org> --- sound/soc/dwc/dwc-i2s.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/dwc/dwc-i2s.c b/sound/soc/dwc/dwc-i2s.c index 2ff619a29655..c04466f5492e 100644 --- a/sound/soc/dwc/dwc-i2s.c +++ b/sound/soc/dwc/dwc-i2s.c @@ -917,7 +917,7 @@ static int jh7110_i2stx0_clk_cfg(struct i2s_clk_config_data *config) static int dw_i2s_probe(struct platform_device *pdev) { - const struct i2s_platform_data *pdata = of_device_get_match_data(&pdev->dev); + const struct i2s_platform_data *pdata = pdev->dev.platform_data; struct dw_i2s_dev *dev; struct resource *res; int ret, irq; --- base-commit: fbfe616ad40c06d68b83b657a94cd2e709dda37b change-id: 20231013-asoc-fix-dwc-06294a3d3675 Best regards, -- Mark Brown <broonie(a)kernel.org>

1 1

configure.ac: fix UMP support detection
by GitHub pull_request - opened 13 Oct '23

13 Oct '23

alsa-project/alsa-utils pull request #240 was opened from bkuhls: https://github.com/alsa-project/alsa-utils/commit/b399fb85a919636b7da34e8bc… added usage of alsa/ump_msg.h without checking whether alsa-lib was compiled with rawmidi support: https://github.com/alsa-project/alsa-lib/blob/master/include/Makefile.am#L37 Fixes a build error when alsa-lib was compiled with --disable-rawmidi aplaymidi.c:34:10: fatal error: alsa/ump_msg.h: No such file or directory 34 | #include <alsa/ump_msg.h> Request URL : https://github.com/alsa-project/alsa-utils/pull/240 Patch URL : https://github.com/alsa-project/alsa-utils/pull/240.patch Repository URL: https://github.com/alsa-project/alsa-utils

1 0

[PATCH] ASoC: rt5650: fix the wrong result of key button
by shumingf＠realtek.com 13 Oct '23

13 Oct '23

From: Shuming Fan <shumingf(a)realtek.com> The RT5650 should enable a power setting for button detection to avoid the wrong result. Signed-off-by: Shuming Fan <shumingf(a)realtek.com> --- sound/soc/codecs/rt5645.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index 1a137ca3f496..7938b52d741d 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -3257,6 +3257,8 @@ int rt5645_set_jack_detect(struct snd_soc_component *component, RT5645_GP1_PIN_IRQ, RT5645_GP1_PIN_IRQ); regmap_update_bits(rt5645->regmap, RT5645_GEN_CTRL1, RT5645_DIG_GATE_CTRL, RT5645_DIG_GATE_CTRL); + regmap_update_bits(rt5645->regmap, RT5645_DEPOP_M1, + RT5645_HP_CB_MASK, RT5645_HP_CB_PU); } rt5645_irq(0, rt5645); -- 2.34.1

2 1

[PATCH] ASoC: codecs: tas2780: Fix log of failed reset via I2C.
by Roy Chateau 13 Oct '23

13 Oct '23

Correctly log failures of reset via I2C. Signed-off-by: Roy Chateau <roy.chateau(a)mep-info.com> --- sound/soc/codecs/tas2780.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/tas2780.c b/sound/soc/codecs/tas2780.c index 86bd6c18a944..41076be23854 100644 --- a/sound/soc/codecs/tas2780.c +++ b/sound/soc/codecs/tas2780.c @@ -39,7 +39,7 @@ static void tas2780_reset(struct tas2780_priv *tas2780) usleep_range(2000, 2050); } - snd_soc_component_write(tas2780->component, TAS2780_SW_RST, + ret = snd_soc_component_write(tas2780->component, TAS2780_SW_RST, TAS2780_RST); if (ret) dev_err(tas2780->dev, "%s:errCode:0x%x Reset error!\n", -- 2.39.2

2 1