January 2023 - Alsa-devel - mailman.alsa-project.org

struct snd_pcm_ops callbacks
by Muni Sekhar 25 Jan '23

25 Jan '23

Hi, struct snd_pcm_ops callbacks can be used for sending\receiving PDM audio data to and from a sound card? Or is it only designed for PCM audio data? -- Thanks, Sekhar

2 3

[PATCH] dt-bindings: Add missing (unevaluated|additional)Properties on child node schemas
by Rob Herring 25 Jan '23

25 Jan '23

Just as unevaluatedProperties or additionalProperties are required at the top level of schemas, they should (and will) also be required for child node schemas. That ensures only documented properties are present. Add unevaluatedProperties or additionalProperties as appropriate, and then add any missing properties flagged by the addition. Signed-off-by: Rob Herring <robh(a)kernel.org> --- To: Krzysztof Kozlowski <krzysztof.kozlowski+dt(a)linaro.org> To: David Airlie <airlied(a)gmail.com> To: Daniel Vetter <daniel(a)ffwll.ch> To: Bartosz Golaszewski <brgl(a)bgdev.pl> To: Jean Delvare <jdelvare(a)suse.com> To: Guenter Roeck <linux(a)roeck-us.net> To: Thomas Gleixner <tglx(a)linutronix.de> To: Marc Zyngier <maz(a)kernel.org> To: Jassi Brar <jassisinghbrar(a)gmail.com> To: Mauro Carvalho Chehab <mchehab(a)kernel.org> To: Lee Jones <lee(a)kernel.org> To: Ulf Hansson <ulf.hansson(a)linaro.org> To: Richard Weinberger <richard(a)nod.at> To: Vignesh Raghavendra <vigneshr(a)ti.com> To: Sebastian Reichel <sre(a)kernel.org> To: Mark Brown <broonie(a)kernel.org> To: "Rafael J. Wysocki" <rafael(a)kernel.org> To: Daniel Lezcano <daniel.lezcano(a)linaro.org> To: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Cc: linux-arm-kernel(a)lists.infradead.org Cc: dri-devel(a)lists.freedesktop.org Cc: linux-gpio(a)vger.kernel.org Cc: linux-hwmon(a)vger.kernel.org Cc: linux-media(a)vger.kernel.org Cc: openbmc(a)lists.ozlabs.org Cc: linux-mmc(a)vger.kernel.org Cc: linux-mtd(a)lists.infradead.org Cc: linux-pm(a)vger.kernel.org Cc: alsa-devel(a)alsa-project.org Cc: linux-spi(a)vger.kernel.org Cc: linux-usb(a)vger.kernel.org --- .../devicetree/bindings/arm/arm,vexpress-juno.yaml | 1 + .../bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml | 5 +++-- .../bindings/arm/tegra/nvidia,tegra20-pmc.yaml | 4 ++++ .../bindings/bus/allwinner,sun50i-a64-de2.yaml | 1 + .../bindings/bus/allwinner,sun8i-a23-rsb.yaml | 1 + .../bus/intel,ixp4xx-expansion-bus-controller.yaml | 6 ++++++ Documentation/devicetree/bindings/bus/palmbus.yaml | 1 + .../devicetree/bindings/display/msm/qcom,mdss.yaml | 5 +++++ Documentation/devicetree/bindings/example-schema.yaml | 2 ++ .../devicetree/bindings/gpio/x-powers,axp209-gpio.yaml | 1 + .../devicetree/bindings/hwmon/adi,ltc2992.yaml | 1 + .../bindings/interrupt-controller/arm,gic-v3.yaml | 2 ++ .../bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml | 1 + .../devicetree/bindings/media/i2c/maxim,max9286.yaml | 7 +++++++ .../bindings/memory-controllers/arm,pl35x-smc.yaml | 1 + .../bindings/memory-controllers/exynos-srom.yaml | 1 + .../memory-controllers/nvidia,tegra124-emc.yaml | 1 + .../bindings/memory-controllers/st,stm32-fmc2-ebi.yaml | 1 + .../devicetree/bindings/mfd/mediatek,mt6370.yaml | 2 ++ .../devicetree/bindings/mmc/aspeed,sdhci.yaml | 1 + Documentation/devicetree/bindings/mtd/mtd.yaml | 1 + .../devicetree/bindings/power/supply/ti,lp8727.yaml | 1 + .../devicetree/bindings/soc/imx/fsl,imx93-src.yaml | 3 ++- .../bindings/soc/microchip/atmel,at91rm9200-tcb.yaml | 1 + Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml | 1 + .../devicetree/bindings/sound/marvell,mmp-sspa.yaml | 1 + .../devicetree/bindings/sound/qcom,wcd934x.yaml | 1 + .../devicetree/bindings/sound/samsung,odroid.yaml | 2 ++ .../devicetree/bindings/soundwire/qcom,soundwire.yaml | 1 + .../bindings/spi/allwinner,sun4i-a10-spi.yaml | 1 + .../bindings/spi/allwinner,sun6i-a31-spi.yaml | 1 + .../devicetree/bindings/spi/spi-controller.yaml | 1 + .../sram/allwinner,sun4i-a10-system-control.yaml | 10 +++++----- Documentation/devicetree/bindings/sram/qcom,ocmem.yaml | 1 + .../devicetree/bindings/thermal/thermal-zones.yaml | 1 + Documentation/devicetree/bindings/usb/qcom,dwc3.yaml | 1 + 36 files changed, 65 insertions(+), 8 deletions(-) diff --git a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml index eec190a96225..09c319f803ba 100644 --- a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml +++ b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml @@ -144,6 +144,7 @@ patternProperties: it is stricter and always has two compatibles. type: object $ref: '/schemas/simple-bus.yaml' + unevaluatedProperties: false properties: compatible: diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml index b369b374fc4a..39e3c248f5b7 100644 --- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml @@ -30,6 +30,7 @@ properties: clocks: type: object + additionalProperties: false properties: compatible: @@ -47,6 +48,7 @@ properties: reset: type: object + additionalProperties: false properties: compatible: @@ -63,6 +65,7 @@ properties: pwm: type: object + additionalProperties: false properties: compatible: @@ -76,8 +79,6 @@ properties: - compatible - "#pwm-cells" - additionalProperties: false - required: - compatible - mboxes diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml index 4a00593b9f7f..89191cfdf619 100644 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml @@ -234,6 +234,7 @@ properties: patternProperties: "^[a-z0-9]+$": type: object + additionalProperties: false properties: clocks: @@ -252,6 +253,9 @@ properties: for controlling a power-gate. See ../reset/reset.txt for more details. + power-domains: + maxItems: 1 + '#power-domain-cells': const: 0 description: Must be 0. diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml index 85c4a979aec4..9845a187bdf6 100644 --- a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml +++ b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml @@ -46,6 +46,7 @@ patternProperties: # All other properties should be child nodes with unit-address and 'reg' "^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-fA-F]+$": type: object + additionalProperties: true properties: reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml index bee5f53f837f..24c939f59091 100644 --- a/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml +++ b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml @@ -45,6 +45,7 @@ properties: patternProperties: "^.*@[0-9a-fA-F]+$": type: object + additionalProperties: true properties: reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml b/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml index 5fb4e7bfa4da..8073988937a8 100644 --- a/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml +++ b/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml @@ -56,8 +56,11 @@ patternProperties: description: Devices attached to chip selects are represented as subnodes. type: object + additionalProperties: true properties: + reg: true + intel,ixp4xx-eb-t1: description: Address timing, extend address phase with n cycles. $ref: /schemas/types.yaml#/definitions/uint32 @@ -120,6 +123,9 @@ patternProperties: $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] + required: + - reg + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/bus/palmbus.yaml b/Documentation/devicetree/bindings/bus/palmbus.yaml index 30fa6526cfc2..c36c1e92a573 100644 --- a/Documentation/devicetree/bindings/bus/palmbus.yaml +++ b/Documentation/devicetree/bindings/bus/palmbus.yaml @@ -36,6 +36,7 @@ patternProperties: # All other properties should be child nodes with unit-address and 'reg' "@[0-9a-f]+$": type: object + additionalProperties: true properties: reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml index ba0460268731..14380596027b 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml @@ -86,18 +86,21 @@ required: patternProperties: "^mdp@[1-9a-f][0-9a-f]*$": type: object + additionalProperties: true properties: compatible: const: qcom,mdp5 "^dsi@[1-9a-f][0-9a-f]*$": type: object + additionalProperties: true properties: compatible: const: qcom,mdss-dsi-ctrl "^phy@[1-9a-f][0-9a-f]*$": type: object + additionalProperties: true properties: compatible: enum: @@ -110,6 +113,7 @@ patternProperties: "^hdmi-phy@[1-9a-f][0-9a-f]*$": type: object + additionalProperties: true properties: compatible: enum: @@ -121,6 +125,7 @@ patternProperties: "^hdmi-tx@[1-9a-f][0-9a-f]*$": type: object + additionalProperties: true properties: compatible: enum: diff --git a/Documentation/devicetree/bindings/example-schema.yaml b/Documentation/devicetree/bindings/example-schema.yaml index dfcf4c27d44a..f4eec4c42fb3 100644 --- a/Documentation/devicetree/bindings/example-schema.yaml +++ b/Documentation/devicetree/bindings/example-schema.yaml @@ -176,6 +176,8 @@ properties: description: Child nodes are just another property from a json-schema perspective. type: object # DT nodes are json objects + # Child nodes also need additionalProperties or unevaluatedProperties + additionalProperties: false properties: vendor,a-child-node-property: description: Child node properties have all the same schema diff --git a/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml b/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml index 7f26f6b1eea1..31906c253940 100644 --- a/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml @@ -35,6 +35,7 @@ properties: patternProperties: "^.*-pins?$": $ref: /schemas/pinctrl/pinmux-node.yaml# + additionalProperties: false properties: pins: diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml index 64a8fcb7bc46..14142b59ee9c 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml @@ -32,6 +32,7 @@ properties: patternProperties: "^channel@([0-1])$": type: object + additionalProperties: false description: | Represents the two supplies to be monitored. diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml index 9f7d3e11aacb..2e72d0acc13d 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml @@ -133,12 +133,14 @@ properties: ppi-partitions: type: object + additionalProperties: false description: PPI affinity can be expressed as a single "ppi-partitions" node, containing a set of sub-nodes. patternProperties: "^interrupt-partition-[0-9]+$": type: object + additionalProperties: false properties: affinity: $ref: /schemas/types.yaml#/definitions/phandle-array diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml index 2193141dd7fd..d546b9e0744d 100644 --- a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml +++ b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml @@ -72,6 +72,7 @@ patternProperties: '^mailbox@[0-9a-f]+$': description: Internal ipi mailbox node type: object # DT nodes are json objects + additionalProperties: false properties: xlnx,ipi-id: description: diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml index 90315e217003..13681748559e 100644 --- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml @@ -141,6 +141,7 @@ properties: patternProperties: "^i2c@[0-3]$": type: object + additionalProperties: false description: | Child node of the i2c bus multiplexer which represents a GMSL link. Each serializer device on the GMSL link remote end is represented with @@ -152,6 +153,12 @@ properties: description: The index of the GMSL channel. maxItems: 1 + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + patternProperties: "^camera@[a-f0-9]+$": type: object diff --git a/Documentation/devicetree/bindings/memory-controllers/arm,pl35x-smc.yaml b/Documentation/devicetree/bindings/memory-controllers/arm,pl35x-smc.yaml index bd23257fe021..6d3962a17e49 100644 --- a/Documentation/devicetree/bindings/memory-controllers/arm,pl35x-smc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/arm,pl35x-smc.yaml @@ -73,6 +73,7 @@ properties: patternProperties: "@[0-7],[a-f0-9]+$": type: object + additionalProperties: true description: | The child device node represents the controller connected to the SMC bus. The controller can be a NAND controller or a pair of any memory diff --git a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml index c6e44f47ce7c..10a2d97e5f8b 100644 --- a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml @@ -38,6 +38,7 @@ properties: patternProperties: "^.*@[0-3],[a-f0-9]+$": type: object + additionalProperties: true description: The actual device nodes should be added as subnodes to the SROMc node. These subnodes, in addition to regular device specification, should diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml index 9163c3f12a85..f5f03bf36413 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml @@ -50,6 +50,7 @@ properties: patternProperties: "^emc-timings-[0-9]+$": type: object + additionalProperties: false properties: nvidia,ram-code: $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml index e76ba767dfd2..14f1833d37c9 100644 --- a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml @@ -47,6 +47,7 @@ properties: patternProperties: "^.*@[0-4],[a-f0-9]+$": + additionalProperties: true type: object $ref: mc-peripheral-props.yaml# diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml index 5644882db2e8..c9574b243046 100644 --- a/Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml +++ b/Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml @@ -35,6 +35,7 @@ properties: adc: type: object + additionalProperties: false description: | Provides 9 channels for system monitoring, including VBUSDIV5 (lower accuracy, higher measure range), VBUSDIV2 (higher accuracy, lower @@ -73,6 +74,7 @@ properties: regulators: type: object + additionalProperties: false description: | List all supported regulators, which support the control for DisplayBias voltages and one general purpose LDO which commonly used to drive the diff --git a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml index 987b287f3bff..9fce8cd7b0b6 100644 --- a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml @@ -42,6 +42,7 @@ patternProperties: "^sdhci@[0-9a-f]+$": type: object $ref: mmc-controller.yaml + unevaluatedProperties: false properties: compatible: diff --git a/Documentation/devicetree/bindings/mtd/mtd.yaml b/Documentation/devicetree/bindings/mtd/mtd.yaml index 78da129e9985..da3d488c335f 100644 --- a/Documentation/devicetree/bindings/mtd/mtd.yaml +++ b/Documentation/devicetree/bindings/mtd/mtd.yaml @@ -44,6 +44,7 @@ patternProperties: "^otp(-[0-9]+)?$": $ref: ../nvmem/nvmem.yaml# + unevaluatedProperties: false description: | An OTP memory region. Some flashes provide a one-time-programmable diff --git a/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml b/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml index ce6fbdba8f6b..0542d4126cf5 100644 --- a/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml +++ b/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml @@ -28,6 +28,7 @@ properties: patternProperties: '^(ac|usb)$': type: object + additionalProperties: false description: USB/AC charging parameters properties: charger-type: diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-src.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-src.yaml index c1cc69b51981..9ce8d8b427fa 100644 --- a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-src.yaml +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-src.yaml @@ -38,8 +38,9 @@ properties: patternProperties: "power-domain@[0-9a-f]+$": - type: object + additionalProperties: false + properties: compatible: items: diff --git a/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml index 33748a061898..a46411149571 100644 --- a/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml +++ b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml @@ -54,6 +54,7 @@ patternProperties: "^timer@[0-2]$": description: The timer block channels that are used as timers or counters. type: object + additionalProperties: false properties: compatible: items: diff --git a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml index 847873289f25..7ab96baf2064 100644 --- a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml +++ b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml @@ -130,6 +130,7 @@ patternProperties: PRU-ICSS configuration space. CFG sub-module represented as a SysCon. type: object + additionalProperties: false properties: compatible: diff --git a/Documentation/devicetree/bindings/sound/marvell,mmp-sspa.yaml b/Documentation/devicetree/bindings/sound/marvell,mmp-sspa.yaml index f302fe89a253..4193d17d1c62 100644 --- a/Documentation/devicetree/bindings/sound/marvell,mmp-sspa.yaml +++ b/Documentation/devicetree/bindings/sound/marvell,mmp-sspa.yaml @@ -60,6 +60,7 @@ properties: properties: endpoint: type: object + additionalProperties: true properties: dai-format: diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml index 184e8ccbdd13..19c4deae74b8 100644 --- a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml @@ -132,6 +132,7 @@ properties: patternProperties: "^.*@[0-9a-f]+$": type: object + additionalProperties: true description: | WCD934x subnode for each slave devices. Bindings of each subnodes depends on the specific driver providing the functionality and diff --git a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml index 7b4e08ddef6a..51a101558c7b 100644 --- a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml +++ b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml @@ -35,12 +35,14 @@ properties: cpu: type: object + additionalProperties: false properties: sound-dai: description: phandles to the I2S controllers codec: type: object + additionalProperties: false properties: sound-dai: items: diff --git a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml index bcbfa71536cd..a191a966cf64 100644 --- a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml +++ b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml @@ -200,6 +200,7 @@ properties: patternProperties: "^.*@[0-9a-f],[0-9a-f]$": type: object + additionalProperties: true description: Child nodes for a standalone audio codec or speaker amplifier IC. It has RX and TX Soundwire secondary devices. diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml index f1176a28fd87..c18eafbfde8c 100644 --- a/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml +++ b/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml @@ -51,6 +51,7 @@ properties: patternProperties: "^.*@[0-9a-f]+": type: object + additionalProperties: true properties: reg: items: diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml index 58b7056f4a70..e2187d395bd1 100644 --- a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml +++ b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml @@ -63,6 +63,7 @@ properties: patternProperties: "^.*@[0-9a-f]+": type: object + additionalProperties: true properties: reg: items: diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index 5a7c72cadf76..90945f59b7e8 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -94,6 +94,7 @@ patternProperties: "^.*@[0-9a-f]+$": type: object $ref: spi-peripheral-props.yaml + additionalProperties: true properties: spi-3wire: diff --git a/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml index 98a7dc7f467d..a1c96985951f 100644 --- a/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml +++ b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml @@ -57,17 +57,17 @@ properties: patternProperties: "^sram@[a-z0-9]+": - type: object - - properties: - compatible: - const: mmio-sram + $ref: /schemas/sram/sram.yaml# + unevaluatedProperties: false patternProperties: "^sram-section?@[a-f0-9]+$": type: object + additionalProperties: false properties: + reg: true + compatible: oneOf: - const: allwinner,sun4i-a10-sram-a3-a4 diff --git a/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml b/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml index 071f2d676196..4bbf6db0b6bd 100644 --- a/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml +++ b/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml @@ -61,6 +61,7 @@ additionalProperties: false patternProperties: "-sram@[0-9a-f]+$": type: object + additionalProperties: false description: A region of reserved memory. properties: diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml index 8581821fa4e1..4f3acdc4dec0 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml @@ -171,6 +171,7 @@ patternProperties: cooling-maps: type: object + additionalProperties: false description: This node describes the action to be taken when a thermal zone crosses one of the temperature thresholds described in the trips diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml index a3f8a3f49852..3cdd40f8acc0 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -118,6 +118,7 @@ properties: patternProperties: "^usb@[0-9a-f]+$": $ref: snps,dwc3.yaml# + unevaluatedProperties: false properties: wakeup-source: false -- 2.39.0

8 10

Firewire ALSA Motu and Phase24
by M. Armsby 25 Jan '23

25 Jan '23

1 0

[PATCH 0/2] ALSA: memalloc: Fix for Xen PV and non-IOMMU systems
by Takashi Iwai 25 Jan '23

25 Jan '23

Hi, this is a patch series to address the recent regression on Xen PV (and possibly non-IOMMU) systems about the SG-buffer memory allocation. We switched to use dma_alloc_noncontiguous() as hoped it handling everything right, but it turned out that this doesn't work always. So this is one step back, use the explicit SG-buffer with dma_alloc_coherent() calls, but in a bit more optimized ways, and also applying only for those systems. Takashi === Takashi Iwai (2): ALSA: memalloc: Explicit SG-allocations for Xen PV and non-IOMMU systems ALSA: memalloc: Use coherent DMA allocation for fallback again sound/core/memalloc.c | 68 +++++++++++++++++++++++++++++++++---------- 1 file changed, 53 insertions(+), 15 deletions(-) -- 2.35.3

2 4

[PATCH] ASoC: ipc4-topology: use different channel mask for each sdw amp feedback
by Peter Ujfalusi 25 Jan '23

25 Jan '23

From: Bard Liao <yung-chuan.liao(a)linux.intel.com> Currently, we use the same channel mask for aggregated speakers. It works fine for playback because we duplicate the audio data for all aggregated speakers. But we need to get audio data from each aggregated speaker and combine them to the captured audio. So we need to set non-overlapping channel mask for aggregated ALH DAIs. Signed-off-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi(a)linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)linux.intel.com> --- sound/soc/sof/ipc4-topology.c | 26 ++++++++++++++++++++++++-- 1 file changed, 24 insertions(+), 2 deletions(-) diff --git a/sound/soc/sof/ipc4-topology.c b/sound/soc/sof/ipc4-topology.c index 59f4d42f9011..34586cbb461f 100644 --- a/sound/soc/sof/ipc4-topology.c +++ b/sound/soc/sof/ipc4-topology.c @@ -1203,8 +1203,11 @@ sof_ipc4_prepare_copier_module(struct snd_sof_widget *swidget, struct sof_ipc4_copier_data *alh_data; struct sof_ipc4_copier *alh_copier; struct snd_sof_widget *w; + u32 ch_count = 0; u32 ch_mask = 0; u32 ch_map; + u32 step; + u32 mask; int i; blob = (struct sof_ipc4_alh_configuration_blob *)ipc4_copier->copier_config; @@ -1214,11 +1217,15 @@ sof_ipc4_prepare_copier_module(struct snd_sof_widget *swidget, /* Get channel_mask from ch_map */ ch_map = copier_data->base_config.audio_fmt.ch_map; for (i = 0; ch_map; i++) { - if ((ch_map & 0xf) != 0xf) + if ((ch_map & 0xf) != 0xf) { ch_mask |= BIT(i); + ch_count++; + } ch_map >>= 4; } + step = ch_count / blob->alh_cfg.count; + mask = GENMASK(step - 1, 0); /* * Set each gtw_cfg.node_id to blob->alh_cfg.mapping[] * for all widgets with the same stream name @@ -1233,7 +1240,22 @@ sof_ipc4_prepare_copier_module(struct snd_sof_widget *swidget, alh_copier = (struct sof_ipc4_copier *)dai->private; alh_data = &alh_copier->data; blob->alh_cfg.mapping[i].alh_id = alh_data->gtw_cfg.node_id; - blob->alh_cfg.mapping[i].channel_mask = ch_mask; + /* + * Set the same channel mask for playback as the audio data is + * duplicated for all speakers. For capture, split the channels + * among the aggregated DAIs. For example, with 4 channels on 2 + * aggregated DAIs, the channel_mask should be 0x3 and 0xc for the + * two DAI's. + * The channel masks used depend on the cpu_dais used in the + * dailink at the machine driver level, which actually comes from + * the tables in soc_acpi files depending on the _ADR and devID + * registers for each codec. + */ + if (w->id == snd_soc_dapm_dai_in) + blob->alh_cfg.mapping[i].channel_mask = ch_mask; + else + blob->alh_cfg.mapping[i].channel_mask = mask << (step * i); + i++; } if (blob->alh_cfg.count > 1) { -- 2.39.1

1 1

[PATCH 0/3] firewire: use single object for user space listeners to dispatch request to IEC 61883-1 FCP region
by Takashi Sakamoto 25 Jan '23

25 Jan '23

Hi, This patch solves long standing issue mentioned by code comment[1] and a commit 281e20323ab7 ("firewire: core: fix use-after-free regression in FCP handler")[2]. This patchset is based on the kernel tree to which another fix is applied[3]. To Iwai-san, I would like to ask you picking them to your local tree, then send them to mainline tree as well as sound patches when the merge window is open for v6.3 kernel, unless any question and objection is posted. (Additionally, I have prepared the other patchset for the subsystem.) Linux FireWire subsystem allows multiple listeners to inbound request to IEC 61883-1 FCP region. The listeners need to access to the payload of request, while the core function needs to guarantee transaction completion by sending response. It is a risk to use-after-free by accessing to the object of request released at completion. The commit 281e20323ab7 solves the risk by the duplication of payload, while it is slightly redundant (and a risk of memory leak[3]). Developers have acknowledged that the advantage of reference count to maintain the lifetime of object. Furthermore, the commit uses NULL pointer for the listeners to distinguish whether the request is to FCP region or not. It is a risk that the listeners retrieve parameters by dereferencing it. For instance, a commit b2405aa948b9 ("firewire: add kernel API to access packet structure in request structure for AR context")[4] adds a kernel API to retrieve time stamp from the data of request, while it is not available in the case of request to FCP region. As a solution, this patchset uses kref structure to maintain lifetime of data for fw_request structure, then dismisses NULL pointer passing to the listeners. Finally, the duplication is obsoleted. This is a log to probe kmalloc/kfree tracepoints events in the case to handle the request to FCP region. irq/35-firewire-273881 [002] 373149.138580: kmalloc: (fw_core_handle_request+0x7b) call_site=fw_core_handle_request+0x7b ptr=0xffff99e93f007300 bytes_req=155 bytes_alloc=192 gfp_flags=GFP_ATOMIC irq/35-firewire-273881 [002] 373149.138582: kmalloc: (handle_request+0x22e) call_site=handle_request+0x22e ptr=0xffff99e96e54f240 bytes_req=56 bytes_alloc=64 gfp_flags=GFP_ATOMIC irq/35-firewire-273881 [002] 373149.138583: kmalloc: (handle_request+0x24b) call_site=handle_request+0x24b ptr=0xffff99e8b8a6ed20 bytes_req=96 bytes_alloc=96 gfp_flags=GFP_ATOMIC irq/35-firewire-273881 [002] 373149.138587: kmalloc: (handle_request+0x22e) call_site=handle_request+0x22e ptr=0xffff99e96e54fa80 bytes_req=56 bytes_alloc=64 gfp_flags=GFP_ATOMIC irq/35-firewire-273881 [002] 373149.138587: kmalloc: (handle_request+0x24b) call_site=handle_request+0x24b ptr=0xffff99e8a3f06960 bytes_req=96 bytes_alloc=96 gfp_flags=GFP_ATOMIC irq/35-firewire-273881 [002] 373149.138591: kmalloc: (handle_request+0x22e) call_site=handle_request+0x22e ptr=0xffff99e96e54f380 bytes_req=56 bytes_alloc=64 gfp_flags=GFP_ATOMIC irq/35-firewire-273881 [002] 373149.138591: kmalloc: (handle_request+0x24b) call_site=handle_request+0x24b ptr=0xffff99e8a3f06600 bytes_req=96 bytes_alloc=96 gfp_flags=GFP_ATOMIC irq/35-firewire-273881 [002] 373149.138598: kmalloc: (handle_request+0x22e) call_site=handle_request+0x22e ptr=0xffff99e96e54f7c0 bytes_req=56 bytes_alloc=64 gfp_flags=GFP_ATOMIC irq/35-firewire-273881 [002] 373149.138598: kmalloc: (handle_request+0x24b) call_site=handle_request+0x24b ptr=0xffff99e8a3f06180 bytes_req=96 bytes_alloc=96 gfp_flags=GFP_ATOMIC irq/35-firewire-273881 [002] 373149.138602: kmalloc: (handle_request+0x22e) call_site=handle_request+0x22e ptr=0xffff99e96e54f4c0 bytes_req=56 bytes_alloc=64 gfp_flags=GFP_ATOMIC irq/35-firewire-273881 [002] 373149.138603: kmalloc: (handle_request+0x24b) call_site=handle_request+0x24b ptr=0xffff99e94d48b660 bytes_req=96 bytes_alloc=96 gfp_flags=GFP_ATOMIC python3-278050 [000] 373149.138605: kfree: (fw_device_op_read+0x148) call_site=fw_device_op_read+0x148 ptr=0xffff99e8b8a6ed20 python3-278050 [000] 373149.138611: kfree: (ioctl_send_response+0x10a) call_site=ioctl_send_response+0x10a ptr=0xffff99e96e54f240 python3-278053 [001] 373149.138612: kfree: (fw_device_op_read+0x148) call_site=fw_device_op_read+0x148 ptr=0xffff99e8a3f06960 snd-oxfw-ctl-se-278061 [003] 373149.138618: kfree: (fw_device_op_read+0x148) call_site=fw_device_op_read+0x148 ptr=0xffff99e94d48b660 python3-278053 [001] 373149.138621: kfree: (ioctl_send_response+0x10a) call_site=ioctl_send_response+0x10a ptr=0xffff99e96e54fa80 python3-278057 [002] 373149.138627: kfree: (fw_device_op_read+0x148) call_site=fw_device_op_read+0x148 ptr=0xffff99e8a3f06180 snd-oxfw-ctl-se-278061 [003] 373149.138636: kfree: (ioctl_send_response+0x10a) call_site=ioctl_send_response+0x10a ptr=0xffff99e96e54f4c0 python3-278055 [000] 373149.138637: kfree: (fw_device_op_read+0x148) call_site=fw_device_op_read+0x148 ptr=0xffff99e8a3f06600 python3-278055 [000] 373149.138642: kfree: (ioctl_send_response+0x10a) call_site=ioctl_send_response+0x10a ptr=0xffff99e96e54f380 python3-278057 [002] 373149.138654: kfree: (fw_request_put+0x2c) call_site=fw_request_put+0x2c ptr=0xffff99e93f007300 python3-278057 [002] 373149.138654: kfree: (ioctl_send_response+0x10a) call_site=ioctl_send_response+0x10a ptr=0xffff99e96e54f7c0 There are five listeners of IEC 61883-1 FCP region: * Python 3: PID 278050 * Python 3: PID 278053 * Python 3: PID 278055 * Python 3: PID 278057 * snd-oxfw-ctl-service: PID 278061 When handling 1394 OHCI Asynchronous Receive context (for request) in softIRQ context, an object is allocated for the request (ptr=0xffff99e93f007300). When queueing event per client, the reference count of object is increased. The object is released when the last listener (PID 278057) executes ioctl(2) with FW_CDEV_IOC_SEND_REQUEST request to decrease the reference count and release event resource. Between the event queueing and event dispatching, the core function send response to complete transaction. The object is not released in the timing, expectedly. This is another log in the case to handle request to non-FCP region: irq/35-firewire-273881 [002] 377484.348477: kmalloc: (fw_core_handle_request+0x7b) call_site=fw_core_handle_request+0x7b ptr=0xffff99e96140cd80 bytes_req=148 bytes_alloc=192 gfp_flags=GFP_ATOMIC irq/35-firewire-273881 [002] 377484.348478: kmalloc: (handle_request+0xa8) call_site=handle_request+0xa8 ptr=0xffff99e9669303c0 bytes_req=56 bytes_alloc=64 gfp_flags=GFP_ATOMIC irq/35-firewire-273881 [002] 377484.348479: kmalloc: (handle_request+0xc4) call_site=handle_request+0xc4 ptr=0xffff99e99eaed0c0 bytes_req=96 bytes_alloc=96 gfp_flags=GFP_ATOMIC python3-280425 [001] 377484.348494: kfree: (fw_device_op_read+0x148) call_site=fw_device_op_read+0x148 ptr=0xffff99e99eaed0c0 python3-280425 [001] 377484.348563: kfree: (ioctl_send_response+0x10a) call_site=ioctl_send_response+0x10a ptr=0xffff99e9669303c0 irq/35-firewire-273881 [002] 377484.348603: kfree: (free_response_callback+0x5a) call_site=free_response_callback+0x5a ptr=0xffff99e96140cd80 The object is allocated (ptr=0xffff99e96140cd80) in the softIRQ, then event is queued. Python 3 process (PID 280425) dispatches the event, then execute ioctl(2) to send response. In softIRQ for 1394 OHCI Asynchronous Receive context (for response), the object is finally released as a result to decrease the reference count. The reference count looks to prevent memory leak. [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/dri… [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… [3] https://lore.kernel.org/lkml/20230117090610.93792-1-o-takashi@sakamocchi.jp/ [4] I should have elaborated the patch title... https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… Takashi Sakamoto (3): firewire: core: use kref structure to maintain lifetime of data for fw_request structure firewire: cdev: obsolete NULL check to detect IEC 61883-1 FCP region firewire: cdev: use single object to dispatch event for request to IEC 61883-1 FCP region drivers/firewire/core-cdev.c | 43 +++++++++-------------- drivers/firewire/core-transaction.c | 53 +++++++++++++++++++++-------- drivers/firewire/core.h | 9 +++++ include/linux/firewire.h | 5 ++- 4 files changed, 67 insertions(+), 43 deletions(-) -- 2.37.2

2 5

[PATCH v2] ALSA: aoa: make remove callback of soundbus driver void returned
by Dawei Li 25 Jan '23

25 Jan '23

Since commit fc7a6209d571 ("bus: Make remove callback return void") forces bus_type::remove be void-returned, it doesn't make much sense for any bus based driver implementing remove callbalk to return non-void to its caller. As such, change the remove function for soundbus based drivers to return void. Signed-off-by: Dawei Li <set_pte_at(a)outlook.com> --- v1 -> v2 - Update commit message. - Rebased to latest sound/for-next. v1 - https://lore.kernel.org/all/TYCP286MB2323BBFCE929111043E60D3BCA189@TYCP286M… --- sound/aoa/fabrics/layout.c | 3 +-- sound/aoa/soundbus/soundbus.h | 2 +- 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/sound/aoa/fabrics/layout.c b/sound/aoa/fabrics/layout.c index ec4ef18555bc..850dc8c53e9b 100644 --- a/sound/aoa/fabrics/layout.c +++ b/sound/aoa/fabrics/layout.c @@ -1094,7 +1094,7 @@ static int aoa_fabric_layout_probe(struct soundbus_dev *sdev) return -ENODEV; } -static int aoa_fabric_layout_remove(struct soundbus_dev *sdev) +static void aoa_fabric_layout_remove(struct soundbus_dev *sdev) { struct layout_dev *ldev = dev_get_drvdata(&sdev->ofdev.dev); int i; @@ -1123,7 +1123,6 @@ static int aoa_fabric_layout_remove(struct soundbus_dev *sdev) kfree(ldev); sdev->pcmid = -1; sdev->pcmname = NULL; - return 0; } #ifdef CONFIG_PM_SLEEP diff --git a/sound/aoa/soundbus/soundbus.h b/sound/aoa/soundbus/soundbus.h index 3a99c1f1a3ca..db40f9d042b4 100644 --- a/sound/aoa/soundbus/soundbus.h +++ b/sound/aoa/soundbus/soundbus.h @@ -185,7 +185,7 @@ struct soundbus_driver { /* we don't implement any matching at all */ int (*probe)(struct soundbus_dev* dev); - int (*remove)(struct soundbus_dev* dev); + void (*remove)(struct soundbus_dev *dev); int (*shutdown)(struct soundbus_dev* dev); -- 2.25.1

2 2

[PATCH v2] ALSA: ac97: make remove callback of ac97 driver void returned
by Dawei Li 25 Jan '23

25 Jan '23

Since commit fc7a6209d571 ("bus: Make remove callback return void") forces bus_type::remove be void-returned, it doesn't make much sense for any bus based driver implementing remove callbalk to return non-void to its caller. As such, change the remove function for ac97 based drivers to return void. Signed-off-by: Dawei Li <set_pte_at(a)outlook.com> --- v1 -> v2 - Update commit message. - Rebased to latest sound/for-next. v1 - https://lore.kernel.org/all/TYCP286MB2323207367F2D39D0D725828CA189@TYCP286M… --- drivers/mfd/wm97xx-core.c | 4 +--- include/sound/ac97/codec.h | 2 +- sound/ac97/bus.c | 5 ++--- 3 files changed, 4 insertions(+), 7 deletions(-) diff --git a/drivers/mfd/wm97xx-core.c b/drivers/mfd/wm97xx-core.c index 9a2331eb1bfa..663acbb1854c 100644 --- a/drivers/mfd/wm97xx-core.c +++ b/drivers/mfd/wm97xx-core.c @@ -319,13 +319,11 @@ static int wm97xx_ac97_probe(struct ac97_codec_device *adev) return ret; } -static int wm97xx_ac97_remove(struct ac97_codec_device *adev) +static void wm97xx_ac97_remove(struct ac97_codec_device *adev) { struct wm97xx_priv *wm97xx = ac97_get_drvdata(adev); snd_ac97_compat_release(wm97xx->ac97); - - return 0; } static const struct ac97_id wm97xx_ac97_ids[] = { diff --git a/include/sound/ac97/codec.h b/include/sound/ac97/codec.h index 9792d25fa369..2fc641cb1982 100644 --- a/include/sound/ac97/codec.h +++ b/include/sound/ac97/codec.h @@ -63,7 +63,7 @@ struct ac97_codec_device { struct ac97_codec_driver { struct device_driver driver; int (*probe)(struct ac97_codec_device *); - int (*remove)(struct ac97_codec_device *); + void (*remove)(struct ac97_codec_device *dev); void (*shutdown)(struct ac97_codec_device *); const struct ac97_id *id_table; }; diff --git a/sound/ac97/bus.c b/sound/ac97/bus.c index 045330883a96..6067c04ce4c0 100644 --- a/sound/ac97/bus.c +++ b/sound/ac97/bus.c @@ -524,10 +524,9 @@ static void ac97_bus_remove(struct device *dev) if (ret < 0) return; - ret = adrv->remove(adev); + adrv->remove(adev); pm_runtime_put_noidle(dev); - if (ret == 0) - ac97_put_disable_clk(adev); + ac97_put_disable_clk(adev); pm_runtime_disable(dev); } -- 2.25.1

2 2

[PATCH v2 0/8] Docs: Add missing SPDX license identifiers of
by SeongJae Park 25 Jan '23

25 Jan '23

Some subsystem documents are missing SPDX license identifiers on index files. This patchset adds those. Changes from v1 (https://lore.kernel.org/lkml/20230114194741.115855-2-sj@kernel.org/) - Separate from index file content changes - Separate patch for each subsystem doc (Alex Deucher) - Use MIT license for gpu (Alex Deucher) SeongJae Park (8): Docs/crypto/index: Add missing SPDX License Identifier Docs/driver-api/index: Add missing SPDX License Identifier Docs/gpu/index: Add missing SPDX License Identifier Docs/hwmon/index: Add missing SPDX License Identifier Docs/input/index: Add missing SPDX License Identifier Docs/mm/index: Add missing SPDX License Identifier Docs/scheduler/index: Add missing SPDX License Identifier Docs/sound/index: Add missing SPDX License Identifier Documentation/crypto/index.rst | 2 ++ Documentation/driver-api/index.rst | 2 ++ Documentation/gpu/index.rst | 2 ++ Documentation/hwmon/index.rst | 2 ++ Documentation/input/index.rst | 2 ++ Documentation/mm/index.rst | 2 ++ Documentation/scheduler/index.rst | 2 ++ Documentation/sound/index.rst | 2 ++ 8 files changed, 16 insertions(+) -- 2.25.1

4 7

[PATCH v2 1/1] Docs/subsystem-apis: Remove '[The ]Linux' prefixes from titles of listed documents
by SeongJae Park 25 Jan '23

25 Jan '23

Some documents that listed on subsystem-apis have 'Linux' or 'The Linux' title prefixes. It's duplicated information, and makes finding the document of interest with human eyes not easy. Remove the prefixes from the titles. Signed-off-by: SeongJae Park <sj(a)kernel.org> --- Changes from v1 (https://lore.kernel.org/lkml/20230114194741.115855-1-sj@kernel.org/) - Drop second patch (will post later for each subsystem) Documentation/PCI/index.rst | 6 +++--- Documentation/cpu-freq/index.rst | 6 +++--- Documentation/crypto/index.rst | 6 +++--- Documentation/driver-api/index.rst | 6 +++--- Documentation/gpu/index.rst | 6 +++--- Documentation/hwmon/index.rst | 6 +++--- Documentation/input/index.rst | 6 +++--- Documentation/mm/index.rst | 6 +++--- Documentation/peci/index.rst | 6 +++--- Documentation/scheduler/index.rst | 6 +++--- Documentation/scsi/index.rst | 6 +++--- Documentation/sound/index.rst | 6 +++--- Documentation/virt/index.rst | 6 +++--- Documentation/watchdog/index.rst | 6 +++--- 14 files changed, 42 insertions(+), 42 deletions(-) diff --git a/Documentation/PCI/index.rst b/Documentation/PCI/index.rst index c17c87af1968..e73f84aebde3 100644 --- a/Documentation/PCI/index.rst +++ b/Documentation/PCI/index.rst @@ -1,8 +1,8 @@ .. SPDX-License-Identifier: GPL-2.0 -======================= -Linux PCI Bus Subsystem -======================= +================= +PCI Bus Subsystem +================= .. toctree:: :maxdepth: 2 diff --git a/Documentation/cpu-freq/index.rst b/Documentation/cpu-freq/index.rst index 2fe32dad562a..de25740651f7 100644 --- a/Documentation/cpu-freq/index.rst +++ b/Documentation/cpu-freq/index.rst @@ -1,8 +1,8 @@ .. SPDX-License-Identifier: GPL-2.0 -============================================================================== -Linux CPUFreq - CPU frequency and voltage scaling code in the Linux(TM) kernel -============================================================================== +======================================================================== +CPUFreq - CPU frequency and voltage scaling code in the Linux(TM) kernel +======================================================================== Author: Dominik Brodowski <linux(a)brodo.de> diff --git a/Documentation/crypto/index.rst b/Documentation/crypto/index.rst index 21338fa92642..da5d5ad2bdf3 100644 --- a/Documentation/crypto/index.rst +++ b/Documentation/crypto/index.rst @@ -1,6 +1,6 @@ -======================= -Linux Kernel Crypto API -======================= +========== +Crypto API +========== :Author: Stephan Mueller :Author: Marek Vasut diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst index d3a58f77328e..b208e0dac3a0 100644 --- a/Documentation/driver-api/index.rst +++ b/Documentation/driver-api/index.rst @@ -1,6 +1,6 @@ -======================================== -The Linux driver implementer's API guide -======================================== +============================== +Driver implementer's API guide +============================== The kernel offers a wide variety of interfaces to support the development of device drivers. This document is an only somewhat organized collection diff --git a/Documentation/gpu/index.rst b/Documentation/gpu/index.rst index b99dede9a5b1..eee5996acf2c 100644 --- a/Documentation/gpu/index.rst +++ b/Documentation/gpu/index.rst @@ -1,6 +1,6 @@ -================================== -Linux GPU Driver Developer's Guide -================================== +============================ +GPU Driver Developer's Guide +============================ .. toctree:: diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index fe2cc6b73634..c2b3c1a822dd 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -1,6 +1,6 @@ -========================= -Linux Hardware Monitoring -========================= +=================== +Hardware Monitoring +=================== .. toctree:: :maxdepth: 1 diff --git a/Documentation/input/index.rst b/Documentation/input/index.rst index 9888f5cbf6d5..35581cd18e91 100644 --- a/Documentation/input/index.rst +++ b/Documentation/input/index.rst @@ -1,6 +1,6 @@ -============================= -The Linux Input Documentation -============================= +=================== +Input Documentation +=================== Contents: diff --git a/Documentation/mm/index.rst b/Documentation/mm/index.rst index 4aa12b8be278..5a94a921ea40 100644 --- a/Documentation/mm/index.rst +++ b/Documentation/mm/index.rst @@ -1,6 +1,6 @@ -===================================== -Linux Memory Management Documentation -===================================== +=============================== +Memory Management Documentation +=============================== Memory Management Guide ======================= diff --git a/Documentation/peci/index.rst b/Documentation/peci/index.rst index 989de10416e7..930e75217c33 100644 --- a/Documentation/peci/index.rst +++ b/Documentation/peci/index.rst @@ -1,8 +1,8 @@ .. SPDX-License-Identifier: GPL-2.0-only -==================== -Linux PECI Subsystem -==================== +============== +PECI Subsystem +============== .. toctree:: diff --git a/Documentation/scheduler/index.rst b/Documentation/scheduler/index.rst index b430d856056a..1aac972a652f 100644 --- a/Documentation/scheduler/index.rst +++ b/Documentation/scheduler/index.rst @@ -1,6 +1,6 @@ -=============== -Linux Scheduler -=============== +========= +Scheduler +========= .. toctree:: :maxdepth: 1 diff --git a/Documentation/scsi/index.rst b/Documentation/scsi/index.rst index 7c5f5f8f614e..919f3edfe1bf 100644 --- a/Documentation/scsi/index.rst +++ b/Documentation/scsi/index.rst @@ -1,8 +1,8 @@ .. SPDX-License-Identifier: GPL-2.0 -==================== -Linux SCSI Subsystem -==================== +============== +SCSI Subsystem +============== .. toctree:: :maxdepth: 1 diff --git a/Documentation/sound/index.rst b/Documentation/sound/index.rst index 4d7d42acf6df..5abed5fc6485 100644 --- a/Documentation/sound/index.rst +++ b/Documentation/sound/index.rst @@ -1,6 +1,6 @@ -=================================== -Linux Sound Subsystem Documentation -=================================== +============================= +Sound Subsystem Documentation +============================= .. toctree:: :maxdepth: 2 diff --git a/Documentation/virt/index.rst b/Documentation/virt/index.rst index 56e003ff28ff..7fb55ae08598 100644 --- a/Documentation/virt/index.rst +++ b/Documentation/virt/index.rst @@ -1,8 +1,8 @@ .. SPDX-License-Identifier: GPL-2.0 -============================ -Linux Virtualization Support -============================ +====================== +Virtualization Support +====================== .. toctree:: :maxdepth: 2 diff --git a/Documentation/watchdog/index.rst b/Documentation/watchdog/index.rst index c177645081d8..4603f2511f58 100644 --- a/Documentation/watchdog/index.rst +++ b/Documentation/watchdog/index.rst @@ -1,8 +1,8 @@ .. SPDX-License-Identifier: GPL-2.0 -====================== -Linux Watchdog Support -====================== +================ +Watchdog Support +================ .. toctree:: :maxdepth: 1 -- 2.25.1

4 3