September 2022 - Alsa-devel - mailman.alsa-project.org

[PATCH -next] slimbus: qcom-ngd: Add error handling in of_qcom_slim_ngd_register
by Lin Yujun 20 Sep '22

20 Sep '22

No error handling is performed when platform_device_add() return fails. Refer to the error handling of driver_set_override(), add error handling for platform_device_add(). Fixes: 917809e2280b ("slimbus: ngd: Add qcom SLIMBus NGD driver") Signed-off-by: Lin Yujun <linyujun809(a)huawei.com> --- drivers/slimbus/qcom-ngd-ctrl.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/slimbus/qcom-ngd-ctrl.c b/drivers/slimbus/qcom-ngd-ctrl.c index 0aa8408464ad..fb591990ddad 100644 --- a/drivers/slimbus/qcom-ngd-ctrl.c +++ b/drivers/slimbus/qcom-ngd-ctrl.c @@ -1470,7 +1470,13 @@ static int of_qcom_slim_ngd_register(struct device *parent, ngd->pdev->dev.of_node = node; ctrl->ngd = ngd; - platform_device_add(ngd->pdev); + ret = platform_device_add(ngd->pdev); + if (ret) { + platform_device_put(ngd->pdev); + kfree(ngd); + of_node_put(node); + return ret; + } ngd->base = ctrl->base + ngd->id * data->offset + (ngd->id - 1) * data->size; -- 2.17.1

2 1

[PATCH] Revert "ALSA: usb-audio: Split endpoint setups for hw_params and prepare"
by Takashi Iwai 20 Sep '22

20 Sep '22

This reverts commit ff878b408a03bef5d610b7e2302702e16a53636e. Unfortunately the recent fix seems bringing another regressions with PulseAudio / pipewire, at least for Steinberg and MOTU devices. As a temporary solution, do a straight revert. The issue for Android will be revisited again later by another different fix (if any). Fixes: ff878b408a03 ("ALSA: usb-audio: Split endpoint setups for hw_params and prepare") Cc: <stable(a)vger.kernel.org> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216500 Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/usb/endpoint.c | 23 ++++++++++++++--------- sound/usb/endpoint.h | 6 ++---- sound/usb/pcm.c | 14 ++++---------- 3 files changed, 20 insertions(+), 23 deletions(-) diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c index 8c8f9a851f89..eb71df9da831 100644 --- a/sound/usb/endpoint.c +++ b/sound/usb/endpoint.c @@ -758,8 +758,7 @@ bool snd_usb_endpoint_compatible(struct snd_usb_audio *chip, * The endpoint needs to be closed via snd_usb_endpoint_close() later. * * Note that this function doesn't configure the endpoint. The substream - * needs to set it up later via snd_usb_endpoint_set_params() and - * snd_usb_endpoint_prepare(). + * needs to set it up later via snd_usb_endpoint_configure(). */ struct snd_usb_endpoint * snd_usb_endpoint_open(struct snd_usb_audio *chip, @@ -1293,13 +1292,12 @@ static int sync_ep_set_params(struct snd_usb_endpoint *ep) /* * snd_usb_endpoint_set_params: configure an snd_usb_endpoint * - * It's called either from hw_params callback. * Determine the number of URBs to be used on this endpoint. * An endpoint must be configured before it can be started. * An endpoint that is already running can not be reconfigured. */ -int snd_usb_endpoint_set_params(struct snd_usb_audio *chip, - struct snd_usb_endpoint *ep) +static int snd_usb_endpoint_set_params(struct snd_usb_audio *chip, + struct snd_usb_endpoint *ep) { const struct audioformat *fmt = ep->cur_audiofmt; int err; @@ -1382,18 +1380,18 @@ static int init_sample_rate(struct snd_usb_audio *chip, } /* - * snd_usb_endpoint_prepare: Prepare the endpoint + * snd_usb_endpoint_configure: Configure the endpoint * * This function sets up the EP to be fully usable state. - * It's called either from prepare callback. + * It's called either from hw_params or prepare callback. * The function checks need_setup flag, and performs nothing unless needed, * so it's safe to call this multiple times. * * This returns zero if unchanged, 1 if the configuration has changed, * or a negative error code. */ -int snd_usb_endpoint_prepare(struct snd_usb_audio *chip, - struct snd_usb_endpoint *ep) +int snd_usb_endpoint_configure(struct snd_usb_audio *chip, + struct snd_usb_endpoint *ep) { bool iface_first; int err = 0; @@ -1414,6 +1412,9 @@ int snd_usb_endpoint_prepare(struct snd_usb_audio *chip, if (err < 0) goto unlock; } + err = snd_usb_endpoint_set_params(chip, ep); + if (err < 0) + goto unlock; goto done; } @@ -1441,6 +1442,10 @@ int snd_usb_endpoint_prepare(struct snd_usb_audio *chip, if (err < 0) goto unlock; + err = snd_usb_endpoint_set_params(chip, ep); + if (err < 0) + goto unlock; + err = snd_usb_select_mode_quirk(chip, ep->cur_audiofmt); if (err < 0) goto unlock; diff --git a/sound/usb/endpoint.h b/sound/usb/endpoint.h index e67ea28faa54..6a9af04cf175 100644 --- a/sound/usb/endpoint.h +++ b/sound/usb/endpoint.h @@ -17,10 +17,8 @@ snd_usb_endpoint_open(struct snd_usb_audio *chip, bool is_sync_ep); void snd_usb_endpoint_close(struct snd_usb_audio *chip, struct snd_usb_endpoint *ep); -int snd_usb_endpoint_set_params(struct snd_usb_audio *chip, - struct snd_usb_endpoint *ep); -int snd_usb_endpoint_prepare(struct snd_usb_audio *chip, - struct snd_usb_endpoint *ep); +int snd_usb_endpoint_configure(struct snd_usb_audio *chip, + struct snd_usb_endpoint *ep); int snd_usb_endpoint_get_clock_rate(struct snd_usb_audio *chip, int clock); bool snd_usb_endpoint_compatible(struct snd_usb_audio *chip, diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index b604f7e95e82..d45d1d7e6664 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -443,17 +443,17 @@ static int configure_endpoints(struct snd_usb_audio *chip, if (stop_endpoints(subs, false)) sync_pending_stops(subs); if (subs->sync_endpoint) { - err = snd_usb_endpoint_prepare(chip, subs->sync_endpoint); + err = snd_usb_endpoint_configure(chip, subs->sync_endpoint); if (err < 0) return err; } - err = snd_usb_endpoint_prepare(chip, subs->data_endpoint); + err = snd_usb_endpoint_configure(chip, subs->data_endpoint); if (err < 0) return err; snd_usb_set_format_quirk(subs, subs->cur_audiofmt); } else { if (subs->sync_endpoint) { - err = snd_usb_endpoint_prepare(chip, subs->sync_endpoint); + err = snd_usb_endpoint_configure(chip, subs->sync_endpoint); if (err < 0) return err; } @@ -551,13 +551,7 @@ static int snd_usb_hw_params(struct snd_pcm_substream *substream, subs->cur_audiofmt = fmt; mutex_unlock(&chip->mutex); - if (subs->sync_endpoint) { - ret = snd_usb_endpoint_set_params(chip, subs->sync_endpoint); - if (ret < 0) - goto unlock; - } - - ret = snd_usb_endpoint_set_params(chip, subs->data_endpoint); + ret = configure_endpoints(chip, subs); unlock: if (ret < 0) -- 2.35.3

1 0

[PATCH linux-next] ALSA: es18xx: Remove the unneeded result variable
by cgel.zte＠gmail.com 20 Sep '22

20 Sep '22

From: ye xingchen <ye.xingchen(a)zte.com.cn> Return the value inb() directly instead of storing it in another redundant variable. Reported-by: Zeal Robot <zealci(a)zte.com.cn> Signed-off-by: ye xingchen <ye.xingchen(a)zte.com.cn> --- sound/isa/es18xx.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/sound/isa/es18xx.c b/sound/isa/es18xx.c index 3fcd168480b6..0a32845b1017 100644 --- a/sound/isa/es18xx.c +++ b/sound/isa/es18xx.c @@ -1344,11 +1344,8 @@ ES18XX_SINGLE("GPO1 Switch", 0, ES18XX_PM, 1, 1, ES18XX_FL_PMPORT), static int snd_es18xx_config_read(struct snd_es18xx *chip, unsigned char reg) { - int data; - outb(reg, chip->ctrl_port); - data = inb(chip->ctrl_port + 1); - return data; + return inb(chip->ctrl_port + 1); } static void snd_es18xx_config_write(struct snd_es18xx *chip, -- 2.25.1

2 1

[PATCH] soundwire: bus: Fix wrong port number in sdw_handle_slave_alerts()
by Richard Fitzgerald 20 Sep '22

20 Sep '22

for_each_set_bit() gives the bit-number counting from 0 (LSbit==0). When processing INTSTAT2, bit 0 is DP4 so the port number is (bit + 4). Likewise for INTSTAT3 bit 0 is DP11 so port number is (bit + 11). Signed-off-by: Richard Fitzgerald <rf(a)opensource.cirrus.com> --- drivers/soundwire/bus.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c index 8eded1a55227..df0ae869ee51 100644 --- a/drivers/soundwire/bus.c +++ b/drivers/soundwire/bus.c @@ -1622,7 +1622,7 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave) port = buf2[0] & SDW_SCP_INTSTAT2_PORT4_10; for_each_set_bit(bit, &port, 8) { /* scp2 ports start from 4 */ - port_num = bit + 3; + port_num = bit + 4; sdw_handle_port_interrupt(slave, port_num, &port_status[port_num]); @@ -1634,7 +1634,7 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave) port = buf2[1] & SDW_SCP_INTSTAT3_PORT11_14; for_each_set_bit(bit, &port, 8) { /* scp3 ports start from 11 */ - port_num = bit + 10; + port_num = bit + 11; sdw_handle_port_interrupt(slave, port_num, &port_status[port_num]); -- 2.30.2

2 2

HDA HDMI PCM device allocation
by Jaroslav Kysela 20 Sep '22

20 Sep '22

Hi, I am trying to fix some issues in UCM for the HDA HDMI devices [1][2]. I would like to summary the current situation at first (correct me, if I miss something): We have two methods to map the PINs in the HDA HDMI driver to the PCM devices (legacy/static - 1:1 mapping, dynamic - used for new devices with the MST capability). There is also set of converters in each HDMI codec and the number of simultaneously used PCM devices cannot go beyond this count of converters in hardware (otherwise -EBUSY error is returned). The count of converters is 3 or 4 depending on the hardware. Things to discuss: It seems quite straight to limit the count of created PCMs to the count of converters. We cannot use more anyway and it does not help, if more PCM devices are allocated (and Jacks reported) to applications when they cannot be used simultaneously. Legacy/static mapping should be converted to dynamic (unless the count of created PCM devices is equal to the count of codec converters). There may be 1:1 mapping between the converter and the PCM device to make things easier. There is a corner case, when more HDMI devices are connected than the count of converters. In this case, an extra method (a module parameter and/or a control element and/or procfs) may be used to filter unwanted HDMI devices. It may be a bit difficult to select the proper filtering key - it may be the PIN/MST device hash or so. The driver may report this key in eld#* files (procfs). Impact to applications: Those days, pulseaudio or pipewire servers are mostly used on the current hardware. Both servers share the legacy probe code for HDMI devices - they are trying to open PCM devices sequentially and check for the error code. There should not be a problem when the connected HDMI devices do not go beyond the count of converters. A minor issue is that the name of the used sink/port may be different (users may be forced to reselect the output path). For other applications, the PCM device assigned to the connected HDMI device may be different (available in a different ALSA device name). I do not think that it's a big issue. It should be easy solvable with an updated software configuration. Let me know about your opinion about this. Thank you, Jaroslav [1] https://github.com/alsa-project/alsa-lib/issues/245 [2] https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/2481 -- Jaroslav Kysela <perex(a)perex.cz> Linux Sound Maintainer; ALSA Project; Red Hat, Inc.

3 2

[PATCH 0/8] ALSA: hda: document/simplify hdac_ext handling
by Pierre-Louis Bossart 20 Sep '22

20 Sep '22

This sound/hda/ext library is a confusing magic black box that very few understand. It needn't be that way, we can document/simplify and make the code clearer. Pierre-Louis Bossart (8): ALSA: hda: make snd_hdac_stream_clear() static ALSA: hda: document state machine for hdac_streams ALSA: hda: ext: make snd_hdac_ext_stream_init() static ALSA: hda: Use hdac_ext prefix in snd_hdac_stream_free_all() for clarity ALSA: hda: add snd_hdac_stop_streams() helper ALSA: hda: ext: simplify logic for stream assignment ALSA: hda: ext: fix locking in stream_release ALSA: hda: ext: remove always-true conditions on host and link release include/sound/hdaudio.h | 3 +- include/sound/hdaudio_ext.h | 5 +-- sound/hda/ext/hdac_ext_stream.c | 34 +++++++-------- sound/hda/hdac_stream.c | 74 +++++++++++++++++++++++++++++---- sound/pci/hda/hda_controller.c | 4 +- sound/soc/intel/avs/core.c | 4 +- sound/soc/intel/skylake/skl.c | 2 +- 7 files changed, 87 insertions(+), 39 deletions(-) -- 2.34.1

2 9

[PATCH] ALSA: hda/hdmi: Fix the converter allocation for the silent stream
by Jaroslav Kysela 20 Sep '22

20 Sep '22

Track the converters handling the silent stream using a new variable to avoid mixing of the open/close and silent stream use. This change ensures the proper allocation of the converters. Fixes: 5f80d6bd2b01 ("ALSA: hda/hdmi: Fix the converter reuse for the silent stream") Cc: Kai Vehmanen <kai.vehmanen(a)linux.intel.com> Signed-off-by: Jaroslav Kysela <perex(a)perex.cz> --- sound/pci/hda/patch_hdmi.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 4576af4cff90..dc36af2928b7 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -54,6 +54,7 @@ MODULE_PARM_DESC(enable_all_pins, "Forcibly enable all pins"); struct hdmi_spec_per_cvt { hda_nid_t cvt_nid; bool assigned; /* the stream has been assigned */ + bool silent_stream; /* silent stream activated */ unsigned int channels_min; unsigned int channels_max; u32 rates; @@ -977,7 +978,8 @@ static int hdmi_setup_stream(struct hda_codec *codec, hda_nid_t cvt_nid, * of the pin. */ static int hdmi_choose_cvt(struct hda_codec *codec, - int pin_idx, int *cvt_id) + int pin_idx, int *cvt_id, + bool silent) { struct hdmi_spec *spec = codec->spec; struct hdmi_spec_per_pin *per_pin; @@ -992,6 +994,9 @@ static int hdmi_choose_cvt(struct hda_codec *codec, if (per_pin && per_pin->silent_stream) { cvt_idx = cvt_nid_to_cvt_index(codec, per_pin->cvt_nid); + per_cvt = get_cvt(spec, cvt_idx); + if (per_cvt->assigned && !silent) + return -EBUSY; if (cvt_id) *cvt_id = cvt_idx; return 0; @@ -1002,7 +1007,7 @@ static int hdmi_choose_cvt(struct hda_codec *codec, per_cvt = get_cvt(spec, cvt_idx); /* Must not already be assigned */ - if (per_cvt->assigned) + if (per_cvt->assigned || per_cvt->silent_stream) continue; if (per_pin == NULL) break; @@ -1188,7 +1193,7 @@ static int hdmi_pcm_open_no_pin(struct hda_pcm_stream *hinfo, if (pcm_idx < 0) return -EINVAL; - err = hdmi_choose_cvt(codec, -1, &cvt_idx); + err = hdmi_choose_cvt(codec, -1, &cvt_idx, false); if (err) return err; @@ -1256,7 +1261,7 @@ static int hdmi_pcm_open(struct hda_pcm_stream *hinfo, } } - err = hdmi_choose_cvt(codec, pin_idx, &cvt_idx); + err = hdmi_choose_cvt(codec, pin_idx, &cvt_idx, false); if (err < 0) goto unlock; @@ -1267,7 +1272,6 @@ static int hdmi_pcm_open(struct hda_pcm_stream *hinfo, set_bit(pcm_idx, &spec->pcm_in_use); per_pin = get_pin(spec, pin_idx); per_pin->cvt_nid = per_cvt->cvt_nid; - per_pin->silent_stream = false; hinfo->nid = per_cvt->cvt_nid; /* flip stripe flag for the assigned stream if supported */ @@ -1749,14 +1753,14 @@ static void silent_stream_enable(struct hda_codec *codec, } pin_idx = pin_id_to_pin_index(codec, per_pin->pin_nid, per_pin->dev_id); - err = hdmi_choose_cvt(codec, pin_idx, &cvt_idx); + err = hdmi_choose_cvt(codec, pin_idx, &cvt_idx, true); if (err) { codec_err(codec, "hdmi: no free converter to enable silent mode\n"); goto unlock_out; } per_cvt = get_cvt(spec, cvt_idx); - per_cvt->assigned = true; + per_cvt->silent_stream = true; per_pin->cvt_nid = per_cvt->cvt_nid; per_pin->silent_stream = true; @@ -1816,7 +1820,7 @@ static void silent_stream_disable(struct hda_codec *codec, cvt_idx = cvt_nid_to_cvt_index(codec, per_pin->cvt_nid); if (cvt_idx >= 0 && cvt_idx < spec->num_cvts) { per_cvt = get_cvt(spec, cvt_idx); - per_cvt->assigned = false; + per_cvt->silent_stream = false; } if (spec->silent_stream_type == SILENT_STREAM_I915) { -- 2.35.3

3 2

[PATCH 00/11] soundwire: intel: cleanups/fixes before code reorganization
by Bard Liao 20 Sep '22

20 Sep '22

This is a really big cleanup to introduce well defined helpers, prior to a larger code reorganization. Pierre-Louis Bossart (11): soundwire: intel: fix error handling on dai registration issues soundwire: intel: simplify flow and use devm_ for DAI registration soundwire: intel: move DAI registration and debugfs init earlier soundwire: intel: move all PDI initialization under intel_register_dai() soundwire: intel: remove clock_stop parameter in intel_shim_init() soundwire: intel: move shim initialization before power up/down soundwire: intel: remove intel_init() wrapper soundwire: intel: simplify read ops assignment soundwire: intel: introduce intel_shim_check_wake() helper soundwire: intel: introduce helpers to start bus soundwire: intel: add helper to stop bus drivers/soundwire/intel.c | 775 +++++++++++++++++++------------------- 1 file changed, 380 insertions(+), 395 deletions(-) -- 2.25.1

2 12

[PATCH 1/2] soundwire: cadence: Fix error check in cdns_xfer_msg()
by Richard Fitzgerald 20 Sep '22

20 Sep '22

_cdns_xfer_msg() returns an sdw_command_response value, not a negative error code. Signed-off-by: Richard Fitzgerald <rf(a)opensource.cirrus.com> --- drivers/soundwire/cadence_master.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/soundwire/cadence_master.c b/drivers/soundwire/cadence_master.c index ca241bbeadd9..3543a923ee6b 100644 --- a/drivers/soundwire/cadence_master.c +++ b/drivers/soundwire/cadence_master.c @@ -708,7 +708,7 @@ cdns_xfer_msg(struct sdw_bus *bus, struct sdw_msg *msg) for (i = 0; i < msg->len / CDNS_MCP_CMD_LEN; i++) { ret = _cdns_xfer_msg(cdns, msg, cmd, i * CDNS_MCP_CMD_LEN, CDNS_MCP_CMD_LEN, false); - if (ret < 0) + if (ret != SDW_CMD_OK) goto exit; } -- 2.30.2

3 4

[PATCH] soundwire: cadence: Write to correct address for each FIFO chunk
by Richard Fitzgerald 20 Sep '22

20 Sep '22

_cdns_xfer_msg() must add the fragment offset to msg->addr to get the base target address of each FIFO chunk. Otherwise every chunk will be written to the first 32 register addresses. Signed-off-by: Richard Fitzgerald <rf(a)opensource.cirrus.com> --- drivers/soundwire/cadence_master.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/soundwire/cadence_master.c b/drivers/soundwire/cadence_master.c index 3ef472049980..ca241bbeadd9 100644 --- a/drivers/soundwire/cadence_master.c +++ b/drivers/soundwire/cadence_master.c @@ -569,7 +569,7 @@ _cdns_xfer_msg(struct sdw_cdns *cdns, struct sdw_msg *msg, int cmd, } base = CDNS_MCP_CMD_BASE; - addr = msg->addr; + addr = msg->addr + offset; for (i = 0; i < count; i++) { data = FIELD_PREP(CDNS_MCP_CMD_DEV_ADDR, msg->dev_num); -- 2.30.2

3 2