September 2022 - Alsa-devel - mailman.alsa-project.org

mt8195-demo: redefine soundcard initialization
by GitHub pull_request - opened 01 Sep '22

01 Sep '22

alsa-project/alsa-ucm-conf pull request #211 was opened from fchiby: The previous initialization in Bootsequence set all Switch to off after boot. Whithout alsactl, alsa-ucm-conf does't work. So remove the setting off of the Switch in the BootSequence and define Enable/DisableSequence in each device section for a proper setting. Signed-off-by: Fadwa Chiby <fchiby(a)baylibre.com> Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/211 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/211.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH v2] soundwire: qcom: fix device status array range
by Srinivas Kandagatla 01 Sep '22

01 Sep '22

This patch updates device status array range from 11 to 12 as we will be reading status from device number 0 to device number 11 inclusive. Without this patch we can potentially access status array out of range during auto-enumeration. Fixes: aa1262ca6695 ("soundwire: qcom: Check device status before reading devid") Reported-by: Dan Carpenter <dan.carpenter(a)oracle.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> --- drivers/soundwire/qcom.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index 9df970eeca45..16a4a51978ca 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -169,7 +169,7 @@ struct qcom_swrm_ctrl { u8 wcmd_id; struct qcom_swrm_port_config pconfig[QCOM_SDW_MAX_PORTS]; struct sdw_stream_runtime *sruntime[SWRM_MAX_DAIS]; - enum sdw_slave_status status[SDW_MAX_DEVICES]; + enum sdw_slave_status status[SDW_MAX_DEVICES + 1]; int (*reg_read)(struct qcom_swrm_ctrl *ctrl, int reg, u32 *val); int (*reg_write)(struct qcom_swrm_ctrl *ctrl, int reg, int val); u32 slave_status; @@ -420,7 +420,7 @@ static int qcom_swrm_get_alert_slave_dev_num(struct qcom_swrm_ctrl *ctrl) ctrl->reg_read(ctrl, SWRM_MCP_SLV_STATUS, &val); - for (dev_num = 0; dev_num < SDW_MAX_DEVICES; dev_num++) { + for (dev_num = 0; dev_num <= SDW_MAX_DEVICES; dev_num++) { status = (val >> (dev_num * SWRM_MCP_SLV_STATUS_SZ)); if ((status & SWRM_MCP_SLV_STATUS_MASK) == SDW_SLAVE_ALERT) { @@ -440,7 +440,7 @@ static void qcom_swrm_get_device_status(struct qcom_swrm_ctrl *ctrl) ctrl->reg_read(ctrl, SWRM_MCP_SLV_STATUS, &val); ctrl->slave_status = val; - for (i = 0; i < SDW_MAX_DEVICES; i++) { + for (i = 0; i <= SDW_MAX_DEVICES; i++) { u32 s; s = (val >> (i * 2)); -- 2.25.1

2 1

[PATCH 0/6] ASoC: codecs: lpass: add support fro sm8450 and sc8280xp
by Srinivas Kandagatla 01 Sep '22

01 Sep '22

THis patchset adds support for SM8450 and SC8280XP SoC. Tested SmartSpeakers and Headset on SM8450 MTP and Lenovo Thinkpad X13s. THanks, Srini Srinivas Kandagatla (6): ASoC: qcom: dt-bindings: add sm8450 and sc8280xp compatibles ASoC: codecs: wsa-macro: add support for sm8450 and sc8280xp ASoC: codecs: tx-macro: add support for sm8450 and sc8280xp ASoC: codecs: rx-macro: add support for sm8450 and sc8280xp ASoC: codecs: va-macro: clear the frame sync counter before enabling ASoC: codecs: tx-macro: add support for sm8450 and sc8280xp .../bindings/sound/qcom,lpass-rx-macro.yaml | 2 + .../bindings/sound/qcom,lpass-tx-macro.yaml | 2 + .../bindings/sound/qcom,lpass-va-macro.yaml | 2 + .../bindings/sound/qcom,lpass-wsa-macro.yaml | 2 + sound/soc/codecs/lpass-rx-macro.c | 2 + sound/soc/codecs/lpass-tx-macro.c | 2 + sound/soc/codecs/lpass-va-macro.c | 72 +++++++++++++++++-- sound/soc/codecs/lpass-wsa-macro.c | 2 + 8 files changed, 82 insertions(+), 4 deletions(-) -- 2.21.0

3 15