February 2022 - Alsa-devel - mailman.alsa-project.org

[PATCH v1] ASoC: nau8822: export right speaker inversion
by Francesco Dolcini 08 Feb '22

08 Feb '22

From: Max Krummenacher <max.krummenacher(a)toradex.com> This control inverts the signal fed to the right amplifier. This allows to connect one loudspeaker to the two speaker amplifiers in a bridge-tied load configuration getting higher output power. Signed-off-by: Max Krummenacher <max.krummenacher(a)toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini(a)toradex.com> --- sound/soc/codecs/nau8822.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/codecs/nau8822.c b/sound/soc/codecs/nau8822.c index 58123390c7a3..bf1155903421 100644 --- a/sound/soc/codecs/nau8822.c +++ b/sound/soc/codecs/nau8822.c @@ -351,6 +351,8 @@ static const struct snd_kcontrol_new nau8822_snd_controls[] = { NAU8822_REG_LHP_VOLUME, NAU8822_REG_RHP_VOLUME, 0, 63, 0, spk_tlv), + SOC_SINGLE("Speaker RInversion Switch", + NAU8822_REG_RIGHT_SPEAKER_CONTROL, 4, 1, 0), SOC_DOUBLE_R("Speaker ZC Switch", NAU8822_REG_LSPKOUT_VOLUME, NAU8822_REG_RSPKOUT_VOLUME, 7, 1, 0), -- 2.25.1

2 5

Re: Bug 215561 - snd-usb-audio:reset_resume error -22 after suspend (fwd from bugzilla)
by Thorsten Leemhuis 08 Feb '22

08 Feb '22

Hi, this is your Linux kernel regression tracker speaking. Top-posting for once, to make this easy accessible to everyone. Below issue is one of those those reports that seem to get stranded in bugzilla.kernel.org Greg, Jaroslav, Takashi, could one of you please take a look? The reporter submitted it as USB bug, but maybe that wasn't a wise choice. Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat) P.S.: As the Linux kernel's regression tracker I'm getting a lot of reports on my table. I can only look briefly into most of them and lack knowledge about most of the areas they concern. I thus unfortunately will sometimes get things wrong or miss something important. I hope that's not the case here; if you think it is, don't hesitate to tell me in a public reply, it's in everyone's interest to set the public record straight. #regzbot poke On 03.02.22 15:59, Thorsten Leemhuis wrote: > Hi, this is your Linux kernel regression tracker speaking. > > There is a regression in bugzilla.kernel.org I'd like to add to the > tracking: > > #regzbot introduced: v5.15..v5.16 > #regzbot from: antifermion(a)protonmail.com <antifermion(a)protonmail.com> > #regzbot title: snd: usb: snd-usb-audio:reset_resume error -22 after suspen > #regzbot link: https://bugzilla.kernel.org/show_bug.cgi?id=215561 > > Quote: > >> If I use the microphone, then suspend and wake up again, I get the error >> >> ``` >> snd-usb-audio 1-5:1.0: reset_resume error -22 >> ``` >> >> Aftewards, audio stops working completely. Both pipewire and pulseaudio (tried both; not at the same time) freeze. >> >> After running >> >> ``` >> rmmod -f snd_usb_audio >> ``` >> >> and replugging the microphone, audio works again. >> Here is the relevant log: >> >> ``` >> [ 157.791937] usbcore: deregistering interface driver snd-usb-audio >> [ 228.517855] usb 1-5: USB disconnect, device number 2 >> [ 236.464334] usb 1-5: new high-speed USB device number 3 using xhci_hcd >> [ 236.798863] usb 1-5: New USB device found, idVendor=0d8c, idProduct=0171, bcdDevice= 1.04 >> [ 236.798867] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=0 >> [ 236.798869] usb 1-5: Product: USB 2.0 HD Audio >> [ 236.798871] usb 1-5: Manufacturer: C-Media Electronics Inc. >> [ 236.826966] input: C-Media Electronics Inc. USB 2.0 HD Audio Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-5/1-5:1.3/0003:0D8C:0171.000B/input/input40 >> [ 236.878380] input: C-Media Electronics Inc. USB 2.0 HD Audio as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-5/1-5:1.3/0003:0D8C:0171.000B/input/input41 >> [ 236.878447] hid-generic 0003:0D8C:0171.000B: input,hiddev96,hidraw2: USB HID v1.11 Device [C-Media Electronics Inc. USB 2.0 HD Audio] on usb-0000:02:00.0-5/input3 >> [ 242.306593] usbcore: registered new interface driver snd-usb-audio >> >> ``` >> >> I'm running Arch Linux (5.16.4.arch1-1). The linux-lts kernel (5.15.18-1) works fine. >> >> Other uses report the same error: https://bbs.archlinux.org/viewtopic.php?id=273469 > > Ciao, Thorsten (wearing his 'Linux kernel regression tracker' hat) > > P.S.: As a Linux kernel regression tracker I'm getting a lot of reports > on my table. I can only look briefly into most of them. Unfortunately > therefore I sometimes will get things wrong or miss something important. > I hope that's not the case here; if you think it is, don't hesitate to > tell me about it in a public reply, that's in everyone's interest. > > BTW, I have no personal interest in this issue, which is tracked using > regzbot, my Linux kernel regression tracking bot > (https://linux-regtracking.leemhuis.info/regzbot/). I'm only posting > this mail to get things rolling again and hence don't need to be CC on > all further activities wrt to this regression. > > --- > Additional information about regzbot: > > If you want to know more about regzbot, check out its web-interface, the > getting start guide, and/or the references documentation: > > https://linux-regtracking.leemhuis.info/regzbot/ > https://gitlab.com/knurd42/regzbot/-/blob/main/docs/getting_started.md > https://gitlab.com/knurd42/regzbot/-/blob/main/docs/reference.md > > The last two documents will explain how you can interact with regzbot > yourself if your want to. > > Hint for reporters: when reporting a regression it's in your interest to > tell #regzbot about it in the report, as that will ensure the regression > gets on the radar of regzbot and the regression tracker. That's in your > interest, as they will make sure the report won't fall through the > cracks unnoticed. > > Hint for developers: you normally don't need to care about regzbot once > it's involved. Fix the issue as you normally would, just remember to > include a 'Link:' tag to the report in the commit message, as explained > in Documentation/process/submitting-patches.rst > That aspect was recently was made more explicit in commit 1f57bd42b77c: > https://git.kernel.org/linus/1f57bd42b77c

1 0

[PATCH][next] kselftest: alsa: fix spelling mistake "desciptor" -> "descriptor"
by Colin Ian King 08 Feb '22

08 Feb '22

There are some spelling mistakes in some ksft messages. Fix them. Signed-off-by: Colin Ian King <colin.i.king(a)gmail.com> --- tools/testing/selftests/alsa/mixer-test.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/alsa/mixer-test.c b/tools/testing/selftests/alsa/mixer-test.c index d0b788b8d287..eb2213540fe3 100644 --- a/tools/testing/selftests/alsa/mixer-test.c +++ b/tools/testing/selftests/alsa/mixer-test.c @@ -198,7 +198,7 @@ static void find_controls(void) err = snd_ctl_poll_descriptors_count(card_data->handle); if (err != 1) { - ksft_exit_fail_msg("Unexpected desciptor count %d for card %d\n", + ksft_exit_fail_msg("Unexpected descriptor count %d for card %d\n", err, card); } @@ -248,12 +248,12 @@ static int wait_for_event(struct ctl_data *ctl, int timeout) &(ctl->card->pollfd), 1, &revents); if (err < 0) { - ksft_print_msg("snd_ctl_poll_desciptors_revents() failed for %s: %d\n", + ksft_print_msg("snd_ctl_poll_descriptors_revents() failed for %s: %d\n", ctl->name, err); return err; } if (revents & POLLERR) { - ksft_print_msg("snd_ctl_poll_desciptors_revents() reported POLLERR for %s\n", + ksft_print_msg("snd_ctl_poll_descriptors_revents() reported POLLERR for %s\n", ctl->name); return -1; } -- 2.34.1

3 2

[PATCH] ALSA: usb-audio: remove redundant assignment to variable c
by Colin Ian King 07 Feb '22

07 Feb '22

The variable c is being initialized in an outer for-loop and also re-initialized inside an inner for-loop. The first initialization is redundant and can be removed. Signed-off-by: Colin Ian King <colin.i.king(a)gmail.com> --- sound/usb/mixer_s1810c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/usb/mixer_s1810c.c b/sound/usb/mixer_s1810c.c index 0255089c9efb..fac4bbc6b275 100644 --- a/sound/usb/mixer_s1810c.c +++ b/sound/usb/mixer_s1810c.c @@ -221,7 +221,7 @@ static int snd_s1810c_init_mixer_maps(struct snd_usb_audio *chip) e = 0xbc; for (n = 0; n < 2; n++) { off = n * 18; - for (b = off, c = 0; b < 18 + off; b++) { + for (b = off; b < 18 + off; b++) { /* This channel to all outputs ? */ for (c = 0; c <= 8; c++) { snd_s1810c_send_ctl_packet(dev, a, b, c, 0, e); -- 2.34.1

2 1

[RFC 00/37] ASoC: Intel: AVS - Audio DSP for cAVS
by Cezary Rojewski 07 Feb '22

07 Feb '22

A continuation of cleanup work of Intel SST solutions found in sound/soc/intel/. With two major chapters released last year catpt [1] and removal of haswell solution [2], time has come for Skylake-driver. Througout 2019, 2020 and 2021 Skylake-driver has had many fixes applied and even attempts of refactors as seen in fundamental overhaul [3], IPC flow adjustments [4] and LARGE_CONFIG overhaul [5] series. Unfortunately, story repeats itself - problems are found within the core of a driver. Painting it with different colors does not change the fact that is it still a house of cards. As changes needed to address those issues would make Skylake solution incompatible with its previous revisions, a decision has been made to provide a new solution instead. In time it would deprecate and replace Skylake-driver. That solution has been called AVS - from AudioDSP architecture name: Audio-Voice-Speech. It is meant to provide support for the exact same range of platforms as its predecessor: SKL, KBL, AML and APL. Several functions found within HDAudio and ASoC framework have been exported and are re-used later by the avs-driver to prevent code being duplicated in this solution. All of these act as driver dependencies and are found at the beginning of the series to make it clear what's needed for avs-driver to compile. Note: this series is dependent upon NHLT-series [6] which was recently merged by Takashi to his for-next branch yet is unavailable on current broonie/for-next. Note: this series does not add fully functional driver as its size would get out of control. Focus is put on adding new code. A SND_SOC_INTEL_SKYLAKE_FAMILY=n dependency is added so no probing attempts are performed. Until all patches are merged, Skylake-driver remains the recommended option. Series which will later follow this one, focus on filling all the remaining functionality gaps and provide filesystems support. Also, a range of machine boards will be added to match range of configurations supported by the avs-driver. Once avs-driver and its collaterals are merged, skylake-driver deprecation and removal process begins, along with all other components that are connected to it e.g.: skylake-driver-only machine boards. As AudioDSP firmware which avs-driver communicates with supports a wide range of audio formats, module configurations and multi-pipeline streams, couple of new concepts are introduce to enable all those functionalities: - Path template and path variants - Runtime path - Conditional path - Granular sound cards (as opposed to 'super-cards') These are later better explained by their respective patches: 'Topology parsing', 'Path management', 'Conditional-path support' and 'Machine board registration'. A 'path' represents a DSP side of audio stream in runtime - is a logical container for pipelines which are themselves composed of modules - processing units. Due to high range of possible audio format combinations, there can be more variants of given path (and thus, its pipelines and modules) than total number of pipelines and module instances which firmware supports concurrently, all the instance IDs are allocated dynamically with help of IDA interface. 'Path templates' come from topology file and describe a pattern which is later used to actually create runtime 'path'. To support modern audio usecases such as WaveOnVoice and EchoReference, conditional paths concept came into existence. These work similarly to standard paths except are a consequence of other paths being created or deleted, rather then being created when userspace app opens specific FE for streaming. Their state machine is controlled by source and sink paths which created them in the first place. Granular machine boards is a contrast to 'super-card' idea which is currently widely used throughout Intel ASoC drivers. Major reasons are: complexity reduction (each board now focuses on a single, concrete device) and overall reduction of topology file size when entire configuration is taken into account. This has functional benefits too: one card failing won't prevent others from probing and being operative. Changes [internal] RFC v2 -> [public] RFC v1: - dropped any sysfs related changes from this series, moved to follow up one - dropped entire subscription-mechanism found in ipc.c. Handlers that are delegated to service certain firmware notifications are now called directly - fixed kernel doc for snd_soc_dapm_new_dai_widgets() as reported by ikp - prefixed snd_hda_codec_device_init() as suggested by Amadeo - improved comments for d0ix transitions for APL-based platforms as suggested by Pierre - a ton of spelling related fixes in most of the commit messages - fixed remaining warnings pointed by scan-build (variable assigned but not used) - replaced most of 'cAVS X.Y' expression usages with 'platform-based' equivalents as suggested by Pierre e.g.: cAVS 1.5 -> SKL-based Changes [internal] RFC v1 -> [internal] RFC v2: - fixed memleak caused by lack of kfree(vols) if memory allocation fails in avs_peakvol_create() as reported by Curtis - fixed missing 'i' iterator incrementation in avs_widget_ready() causing reference loss as reported by Curtis - replace hardcode: 0x40 usage with snd_hdac_calc_stream_format as suggested by Curtis. In consequence, readability for all code loading (CL) procedues has increased and such approach auto-documents the CL stream preparation - updated behavior of all index-fetching functions found in utils.c: avs_module_entry_index(), avs_module_id_entry_index() and follow ups: avs_get_module_entry(), avs_get_module_id_entry() to better conform to linux-kernel standard when no entry is found (return -ENOENT) rather than C++ standard (return -1, what in kernel case translated to -EPERM) as suggested by Curtis and Peter - several suggestions have been made regarding spacing, and so far, I've agreed and applied with all of them. None proposed seemed out of place or redundant - avs_path_stop() renamed to avs_path_pause() pipeline states are represented by RESET/PAUSED/RUNNING. avs_path_reset() and avs_path_run() were already there and avs_path_stop() just didn't look cohesive - added missing parsers for num_output_pin and num_input_pin which are required for custom modules such as WAVES or DSM - dropped 'priv_param_length' from custom module descriptor as this field is obsolete in firmware - parse_dictionary() has been split into parse_dictionary_header() and parse_dictionary_entries() to drop code duplication present in several parsing function which could not re-use entire parse_dictionary() - added avs_tplg_vendor_array_lookup_next() and avs_tplg_vendor_entry_next() to drop code duplicated present in several parsing functions. This change greatly impacted readability of all parsers - parsing helpers such avs_tplg_vendor_array_lookup() now return offset by updating specified in function argument list u32 *offset variable. This is to address problem when u32 offset would be greater than max int, which is the return type for these functions - AVS_DEFINE_PTR_PARSER() macro has been introduced to drop code duplication for all ptr-parsing users - all struct avs_path_module creators have had their declaration updated: function argument *owner ceased to exist as it could already be accessed by mod->owner - fixed the order of operation for conditional paths (e.g.: echo reference) so these are no longer controlled by "source" path and instead are impacted by state changes of source and sink paths both. Previously only source path e.g. playback sourcing echo reference would trigger RUNNING status for conditional path. Equivalent RUNNING on WoV path which is in this case sink path, would not do so, leading to order-of-operation problems. Behavior has been changed to: both source and sink need to be RUNNING for conditional path to be set to RUNNING too. PAUSED for either source or sink will cause PAUSED transition for conditional path. - to achieve the above, path states are now saved in 'state' i.e. new u32 field for struct avs_path - resigned from fw_filename field usage in favour of newly added tplg_filename for machine board descriptors as suggested by Pierre - platform descriptor fields have had their names update better reflect their purpose as suggested by Pierre - fixed comp_list missing locking when manipulated - all message senders now accept request as pointer as suggeseted by Peter - resigned of AZX_ usage for all ADSP-related registers, leaving them only for HOST memory space related operations - fixed disable path for core DSP operations: power/reset/stall as reported by Peter - safety when locking between received responses (reply vs notification) has been lowered as suggested by Pierre. Most usages are not performed in IRQ context and none is done in hard-IRQ one - s/master/main/ plus AVS_MAIN_CORE_MASK has replaced ->master_mask - several functions have had their logging updated - logs have been moved to lower level functions as suggested by Pierre - hdac_ext_stream usage has been streamlined to estream, hdac_streams are represented by hstream instead - hw_params() are resilient to scenarios when they are called mutliple times as reported by Pierre - avs_dsp_enable() now collapses if any of its steps fails as reported by Pierre and Peter - avs_module_ida_empty() now returns value of type bool as suggested by Bard [1]: https://www.spinics.net/lists/alsa-devel/msg116440.html [2]: https://www.spinics.net/lists/alsa-devel/msg116901.html [3]: https://www.spinics.net/lists/alsa-devel/msg94199.html [4]: https://www.spinics.net/lists/alsa-devel/msg92588.html [5]: https://lore.kernel.org/all/20190808181549.12521-1-cezary.rojewski@intel.co… [6]: https://lore.kernel.org/all/YaDq7L1Mu++3UBL7@sirena.org.uk/T/ Cezary Rojewski (37): ALSA: hda: Add snd_hdac_ext_bus_link_at() helper ALSA: hda: Update and expose snd_hda_codec_device_init() ALSA: hda: Update and expose codec register procedures ALSA: hda: Expose codec cleanup and power-save functions ALSA: hda: Add helper macros for DSP capable devices ASoC: Export DAI register and widget ctor and dctor functions ASoC: Intel: Introduce AVS driver ASoC: Intel: avs: Inter process communication ASoC: Intel: avs: Add code loading requests ASoC: Intel: avs: Add pipeline management requests ASoC: Intel: avs: Add module management requests ASoC: Intel: avs: Add power management requests ASoC: Intel: avs: Add ROM requests ASoC: Intel: avs: Add basefw runtime-parameter requests ASoC: Intel: avs: Firmware resources management utilities ASoC: Intel: avs: Declare module configuration types ASoC: Intel: avs: Dynamic firmware resources management ASoC: Intel: avs: Topology parsing ASoC: Intel: avs: Path management ASoC: Intel: avs: Conditional-path support ASoC: Intel: avs: General code loading flow ASoC: Intel: avs: Implement CLDMA transfer ASoC: Intel: avs: Code loading over CLDMA ASoC: Intel: avs: Code loading over HDA ASoC: Intel: avs: Generic soc component driver ASoC: Intel: avs: Generic PCM FE operations ASoC: Intel: avs: non-HDA PCM BE operations ASoC: Intel: avs: HDA PCM BE operations ASoC: Intel: avs: Coredump and recovery flow ASoC: Intel: avs: Prepare for firmware tracing ASoC: Intel: avs: D0ix power state support ASoC: Intel: avs: Event tracing ASoC: Intel: avs: Machine board registration ASoC: Intel: avs: PCI driver implementation ASoC: Intel: avs: Power management ASoC: Intel: avs: SKL-based platforms support ASoC: Intel: avs: APL-based platforms support .../ABI/testing/sysfs-bus-pci-devices-avs | 24 + include/sound/hda_codec.h | 11 +- include/sound/hdaudio.h | 2 + include/sound/hdaudio_ext.h | 50 + include/sound/soc-acpi.h | 2 + include/sound/soc-dapm.h | 1 + include/uapi/sound/intel/avs/tokens.h | 147 ++ sound/hda/ext/hdac_ext_controller.c | 31 +- sound/pci/hda/hda_codec.c | 93 +- sound/pci/hda/hda_local.h | 2 - sound/soc/codecs/hdac_hda.c | 2 +- sound/soc/intel/Kconfig | 19 + sound/soc/intel/Makefile | 1 + sound/soc/intel/avs/Makefile | 12 + sound/soc/intel/avs/apl.c | 244 +++ sound/soc/intel/avs/avs.h | 331 ++++ sound/soc/intel/avs/board_selection.c | 459 +++++ sound/soc/intel/avs/cldma.c | 328 ++++ sound/soc/intel/avs/cldma.h | 29 + sound/soc/intel/avs/core.c | 737 +++++++ sound/soc/intel/avs/dsp.c | 326 ++++ sound/soc/intel/avs/ipc.c | 612 ++++++ sound/soc/intel/avs/loader.c | 672 +++++++ sound/soc/intel/avs/messages.c | 674 +++++++ sound/soc/intel/avs/messages.h | 813 ++++++++ sound/soc/intel/avs/path.c | 1287 +++++++++++++ sound/soc/intel/avs/path.h | 85 + sound/soc/intel/avs/pcm.c | 1240 ++++++++++++ sound/soc/intel/avs/registers.h | 83 + sound/soc/intel/avs/skl.c | 127 ++ sound/soc/intel/avs/topology.c | 1700 +++++++++++++++++ sound/soc/intel/avs/topology.h | 207 ++ sound/soc/intel/avs/trace.c | 34 + sound/soc/intel/avs/trace.h | 158 ++ sound/soc/intel/avs/utils.c | 305 +++ sound/soc/soc-core.c | 1 + sound/soc/soc-dapm.c | 15 + 37 files changed, 10824 insertions(+), 40 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-pci-devices-avs create mode 100644 include/uapi/sound/intel/avs/tokens.h create mode 100644 sound/soc/intel/avs/Makefile create mode 100644 sound/soc/intel/avs/apl.c create mode 100644 sound/soc/intel/avs/avs.h create mode 100644 sound/soc/intel/avs/board_selection.c create mode 100644 sound/soc/intel/avs/cldma.c create mode 100644 sound/soc/intel/avs/cldma.h create mode 100644 sound/soc/intel/avs/core.c create mode 100644 sound/soc/intel/avs/dsp.c create mode 100644 sound/soc/intel/avs/ipc.c create mode 100644 sound/soc/intel/avs/loader.c create mode 100644 sound/soc/intel/avs/messages.c create mode 100644 sound/soc/intel/avs/messages.h create mode 100644 sound/soc/intel/avs/path.c create mode 100644 sound/soc/intel/avs/path.h create mode 100644 sound/soc/intel/avs/pcm.c create mode 100644 sound/soc/intel/avs/registers.h create mode 100644 sound/soc/intel/avs/skl.c create mode 100644 sound/soc/intel/avs/topology.c create mode 100644 sound/soc/intel/avs/topology.h create mode 100644 sound/soc/intel/avs/trace.c create mode 100644 sound/soc/intel/avs/trace.h create mode 100644 sound/soc/intel/avs/utils.c -- 2.25.1

4 56

Add UCM for PinePhone
by GitHub pull_request - edited 07 Feb '22

07 Feb '22

alsa-project/alsa-ucm-conf pull request #134 was edited from tomfitzhenry: Fixes https://github.com/alsa-project/alsa-ucm-conf/issues/124. The DTS configuration has had a unique audio card name since 5.14: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arc… This UCM config is copied from https://gitlab.com/pine64-org/pine64-alsa-ucm/, which was developed by many developers ( https://gitlab.com/pine64-org/pine64-alsa-ucm/-/merge_requests/1 ) and is BSD-3-Clause licensed. I have tested that with this PR, the PinePhone has the expected HiFi and VoiceCall profiles.This testing found that the `File` directive in `SectionUseCase` needs to be absolute (for the symlink to work). I've fixed this in this PR: https://github.com/alsa-project/alsa-ucm-conf/pull/134/commits/5059e57a2197…. See also: * `alsa-info`: https://alsa-project.org/db/?f=5e331f5ef10bd167b3bd7640bfcf0e879100f80d * `pa-info`: [pa-info.txt](https://github.com/alsa-project/alsa-ucm-conf/files/8015083/pa… * https://gitlab.com/pine64-org/pine64-alsa-ucm/-/issues/3 Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/134 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/134.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Add UCM for PinePhone
by GitHub pull_request - edited 07 Feb '22

07 Feb '22

alsa-project/alsa-ucm-conf pull request #134 was edited from tomfitzhenry: Fixes https://github.com/alsa-project/alsa-ucm-conf/issues/124. The DTS configuration has had a unique audio card name since 5.14: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arc… This UCM config is copied from https://gitlab.com/pine64-org/pine64-alsa-ucm/, which is BSD-3-Clause licensed. I have tested that with this PR, the PinePhone has the expected HiFi and VoiceCall profiles.This testing found that the `File` directive in `SectionUseCase` needs to be absolute (for the symlink to work). I've fixed this in this PR: https://github.com/alsa-project/alsa-ucm-conf/pull/134/commits/5059e57a2197…. `alsa-info`: https://alsa-project.org/db/?f=5e331f5ef10bd167b3bd7640bfcf0e879100f80d `pa-info`: [pa-info.txt](https://github.com/alsa-project/alsa-ucm-conf/files/8015083/pa… See also: * https://gitlab.com/pine64-org/pine64-alsa-ucm/-/merge_requests/1 * https://gitlab.com/pine64-org/pine64-alsa-ucm/-/issues/3 Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/134 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/134.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Add UCM for PinePhone
by GitHub pull_request - edited 07 Feb '22

07 Feb '22

alsa-project/alsa-ucm-conf pull request #134 was edited from tomfitzhenry: Fixes https://github.com/alsa-project/alsa-ucm-conf/issues/124. The DTS configuration has had a unique audio card name since 5.14: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arc… This UCM config is copied from https://gitlab.com/pine64-org/pine64-alsa-ucm/, which is BSD-3-Clause licensed. I have tested that with this PR, the PinePhone has the expected HiFi and VoiceCall profiles.This testing found that the `File` directive in `SectionUseCase` needs to be absolute (for the symlink to work). I've fixed this in this PR: https://github.com/alsa-project/alsa-ucm-conf/pull/134/commits/5059e57a2197…. See also: * https://gitlab.com/pine64-org/pine64-alsa-ucm/-/merge_requests/1 * https://gitlab.com/pine64-org/pine64-alsa-ucm/-/issues/3 Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/134 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/134.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Add UCM for PinePhone
by GitHub pull_request - edited 07 Feb '22

07 Feb '22

alsa-project/alsa-ucm-conf pull request #134 was edited from tomfitzhenry: Fixes https://github.com/alsa-project/alsa-ucm-conf/issues/124. The DTS configuration has had a unique audio card name since 5.14: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arc… This UCM config is copied from https://gitlab.com/pine64-org/pine64-alsa-ucm/, which is BSD-3-Clause licensed. I have tested that with this PR, the PinePhone has the expected HiFi and VoiceCall profiles.This testing found that the `File` directive in `SectionUseCase` needs to be absolute (for the symlink to work). I've fixed this in https://github.com/alsa-project/alsa-ucm-conf/pull/134/commits/5059e57a2197…. See also: * https://gitlab.com/pine64-org/pine64-alsa-ucm/-/merge_requests/1 * https://gitlab.com/pine64-org/pine64-alsa-ucm/-/issues/3 Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/134 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/134.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Add UCM for PinePhone
by GitHub pull_request - edited 07 Feb '22

07 Feb '22

alsa-project/alsa-ucm-conf pull request #134 was edited from tomfitzhenry: Fixes https://github.com/alsa-project/alsa-ucm-conf/issues/124. The DTS configuration has had a unique audio card name since 5.14: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arc… This UCM config is copied from https://gitlab.com/pine64-org/pine64-alsa-ucm/, which is BSD-3-Clause licensed. This UCM has been tested via Pulseaudio's ALSA_CONFIG_UCM2 environment variable, but I've not yet tested that this UCM, when included in this package, is correctly recognised on a PinePhone as part of this Todo: * [x] Test that this UCM is correctly recognised on a PinePhone. **Done**. This testing found that the `File` directive in `SectionUseCase` needs to be absolute (for the symlink to work). I've fixed this in https://github.com/alsa-project/alsa-ucm-conf/pull/134/commits/5059e57a2197…. See also: * https://gitlab.com/pine64-org/pine64-alsa-ucm/-/merge_requests/1 * https://gitlab.com/pine64-org/pine64-alsa-ucm/-/issues/3 Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/134 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/134.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0