February 2022 - Alsa-devel - mailman.alsa-project.org

[PATCH] ALSA: hda/hdmi: add keep-alive support for ADL-P and DG2
by Kai Vehmanen 16 Feb '22

16 Feb '22

Implement HDA keep alive (KAE) support for Intel display codecs. When no audio stream is active, the display codec will provide a continuous clock and a valid but silent audio stream to any connected HDMI/DP receiver. Without this, upon starting a new playback stream, initial samples may be lost as many receivers require time to initialize for new clock. This is a new feature in Intel AlderLake-P display codec implementation and replaces the Intel i915 silent-stream extension that has been used on older hardware. Main benefit of the new method is that codec no longer needs to be kept in D0 power state. This patch depends on commit 112a87c48e83 ("drm/i915/display: program audio CDCLK-TS for keepalives"). Signed-off-by: Kai Vehmanen <kai.vehmanen(a)linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Jyri Sarha <jyri.sarha(a)intel.com> --- Hi, with newer Intel hardware, we can support the HDMI/DP silent-stream/keep-alive with standard HDA KAE bit. This patch only enables KAE for Intel hardware, but the patch is done in a way to allow other vendor's to opt-in and use the same KAE code. As I can't validate this for other hw, I only enable the feature for hw I have. The Intel specific implementation is put under SILENT_STREAM_I915 and it continues to be used for older hardware. sound/pci/hda/Kconfig | 19 ++--- sound/pci/hda/patch_hdmi.c | 152 +++++++++++++++++++++++++++---------- 2 files changed, 122 insertions(+), 49 deletions(-) diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig index febe1c2b7d9a..9f6c99c1d87b 100644 --- a/sound/pci/hda/Kconfig +++ b/sound/pci/hda/Kconfig @@ -285,15 +285,16 @@ config SND_HDA_INTEL_HDMI_SILENT_STREAM bool "Enable Silent Stream always for HDMI" depends on SND_HDA_INTEL help - Intel hardware has a feature called 'silent stream', that - keeps external HDMI receiver's analog circuitry powered on - avoiding 2-3 sec silence during playback start. This mechanism - relies on setting channel_id as 0xf, sending info packet and - preventing codec D3 entry (increasing platform static power - consumption when HDMI receiver is plugged-in). 2-3 sec silence - at the playback start is expected whenever there is format change. - (default is 2 channel format). - Say Y to enable Silent Stream feature. + Say Y to enable HD-Audio Keep Alive (KAE) aka Silent Stream + for HDMI on hardware that supports the feature. + + When enabled, the HDMI/DisplayPort codec will continue to provide + a continuous clock and a valid but silent data stream to + any connected external receiver. This allows to avoid gaps + at start of playback. Many receivers require multiple seconds + to start playing audio after the clock has been stopped. + This feature can impact power consumption as resources + are kept reserved both at transmitter and receiver. endif diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 64fe025fda86..584af2aa2f41 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -120,6 +120,12 @@ struct hdmi_pcm { struct snd_kcontrol *eld_ctl; }; +enum { + SILENT_STREAM_OFF = 0, + SILENT_STREAM_KAE, /* use standard HDA Keep-Alive */ + SILENT_STREAM_I915, /* Intel i915 extension */ +}; + struct hdmi_spec { struct hda_codec *codec; int num_cvts; @@ -179,7 +185,7 @@ struct hdmi_spec { hda_nid_t vendor_nid; const int *port_map; int port_num; - bool send_silent_stream; /* Flag to enable silent stream feature */ + int silent_stream_type; }; #ifdef CONFIG_SND_HDA_COMPONENT @@ -1665,18 +1671,71 @@ static void hdmi_present_sense_via_verbs(struct hdmi_spec_per_pin *per_pin, #define I915_SILENT_FORMAT_BITS 16 #define I915_SILENT_FMT_MASK 0xf +static void silent_stream_enable_i915(struct hda_codec *codec, + struct hdmi_spec_per_pin *per_pin) +{ + unsigned int format; + + snd_hdac_sync_audio_rate(&codec->core, per_pin->pin_nid, + per_pin->dev_id, I915_SILENT_RATE); + + /* trigger silent stream generation in hw */ + format = snd_hdac_calc_stream_format(I915_SILENT_RATE, I915_SILENT_CHANNELS, + I915_SILENT_FORMAT, I915_SILENT_FORMAT_BITS, 0); + snd_hda_codec_setup_stream(codec, per_pin->cvt_nid, + I915_SILENT_FMT_MASK, I915_SILENT_FMT_MASK, format); + usleep_range(100, 200); + snd_hda_codec_setup_stream(codec, per_pin->cvt_nid, I915_SILENT_FMT_MASK, 0, format); + + per_pin->channels = I915_SILENT_CHANNELS; + hdmi_setup_audio_infoframe(codec, per_pin, per_pin->non_pcm); +} + +static void silent_stream_set_kae(struct hda_codec *codec, + struct hdmi_spec_per_pin *per_pin, + bool enable) +{ + unsigned int param; + + codec_dbg(codec, "HDMI: KAE %d cvt-NID=0x%x\n", enable, per_pin->cvt_nid); + + param = snd_hda_codec_read(codec, per_pin->cvt_nid, 0, AC_VERB_GET_DIGI_CONVERT_1, 0); + param = (param >> 16) & 0xff; + + if (enable) + param |= AC_DIG3_KAE; + else + param &= ~AC_DIG3_KAE; + + snd_hda_codec_write(codec, per_pin->cvt_nid, 0, AC_VERB_SET_DIGI_CONVERT_3, param); +} + static void silent_stream_enable(struct hda_codec *codec, struct hdmi_spec_per_pin *per_pin) { struct hdmi_spec *spec = codec->spec; struct hdmi_spec_per_cvt *per_cvt; int cvt_idx, pin_idx, err; - unsigned int format; + int keep_power = 0; + + /* + * Power-up will call hdmi_present_sense, so the PM calls + * have to be done without mutex held. + */ + + err = snd_hda_power_up_pm(codec); + if (err < 0 && err != -EACCES) { + codec_err(codec, + "Failed to power up codec for silent stream enable ret=[%d]\n", err); + snd_hda_power_down_pm(codec); + return; + } mutex_lock(&per_pin->lock); if (per_pin->setup) { codec_dbg(codec, "hdmi: PCM already open, no silent stream\n"); + err = -EBUSY; goto unlock_out; } @@ -1703,22 +1762,23 @@ static void silent_stream_enable(struct hda_codec *codec, /* configure unused pins to choose other converters */ pin_cvt_fixup(codec, per_pin, 0); - snd_hdac_sync_audio_rate(&codec->core, per_pin->pin_nid, - per_pin->dev_id, I915_SILENT_RATE); - - /* trigger silent stream generation in hw */ - format = snd_hdac_calc_stream_format(I915_SILENT_RATE, I915_SILENT_CHANNELS, - I915_SILENT_FORMAT, I915_SILENT_FORMAT_BITS, 0); - snd_hda_codec_setup_stream(codec, per_pin->cvt_nid, - I915_SILENT_FMT_MASK, I915_SILENT_FMT_MASK, format); - usleep_range(100, 200); - snd_hda_codec_setup_stream(codec, per_pin->cvt_nid, I915_SILENT_FMT_MASK, 0, format); - - per_pin->channels = I915_SILENT_CHANNELS; - hdmi_setup_audio_infoframe(codec, per_pin, per_pin->non_pcm); + switch (spec->silent_stream_type) { + case SILENT_STREAM_KAE: + silent_stream_set_kae(codec, per_pin, true); + break; + case SILENT_STREAM_I915: + silent_stream_enable_i915(codec, per_pin); + keep_power = 1; + break; + default: + break; + } unlock_out: mutex_unlock(&per_pin->lock); + + if (err || !keep_power) + snd_hda_power_down_pm(codec); } static void silent_stream_disable(struct hda_codec *codec, @@ -1726,7 +1786,16 @@ static void silent_stream_disable(struct hda_codec *codec, { struct hdmi_spec *spec = codec->spec; struct hdmi_spec_per_cvt *per_cvt; - int cvt_idx; + int cvt_idx, err; + + err = snd_hda_power_up_pm(codec); + if (err < 0 && err != -EACCES) { + codec_err(codec, + "Failed to power up codec for silent stream disable ret=[%d]\n", + err); + snd_hda_power_down_pm(codec); + return; + } mutex_lock(&per_pin->lock); if (!per_pin->silent_stream) @@ -1741,11 +1810,16 @@ static void silent_stream_disable(struct hda_codec *codec, per_cvt->assigned = 0; } + if (spec->silent_stream_type == SILENT_STREAM_KAE) + silent_stream_set_kae(codec, per_pin, false); + per_pin->cvt_nid = 0; per_pin->silent_stream = false; unlock_out: mutex_unlock(&per_pin->lock); + + snd_hda_power_down_pm(codec); } /* update ELD and jack state via audio component */ @@ -1767,29 +1841,11 @@ static void sync_eld_via_acomp(struct hda_codec *codec, monitor_next = per_pin->sink_eld.monitor_present; mutex_unlock(&per_pin->lock); - /* - * Power-up will call hdmi_present_sense, so the PM calls - * have to be done without mutex held. - */ - - if (spec->send_silent_stream) { - int pm_ret; - - if (!monitor_prev && monitor_next) { - pm_ret = snd_hda_power_up_pm(codec); - if (pm_ret < 0) - codec_err(codec, - "Monitor plugged-in, Failed to power up codec ret=[%d]\n", - pm_ret); + if (spec->silent_stream_type) { + if (!monitor_prev && monitor_next) silent_stream_enable(codec, per_pin); - } else if (monitor_prev && !monitor_next) { + else if (monitor_prev && !monitor_next) silent_stream_disable(codec, per_pin); - pm_ret = snd_hda_power_down_pm(codec); - if (pm_ret < 0) - codec_err(codec, - "Monitor plugged-out, Failed to power down codec ret=[%d]\n", - pm_ret); - } } } @@ -2982,7 +3038,7 @@ static int intel_hsw_common_init(struct hda_codec *codec, hda_nid_t vendor_nid, * module param or Kconfig option */ if (send_silent_stream) - spec->send_silent_stream = true; + spec->silent_stream_type = SILENT_STREAM_I915; return parse_intel_hdmi(codec); } @@ -3035,6 +3091,22 @@ static int patch_i915_tgl_hdmi(struct hda_codec *codec) return ret; } +static int patch_i915_adlp_hdmi(struct hda_codec *codec) +{ + struct hdmi_spec *spec; + int res; + + res = patch_i915_tgl_hdmi(codec); + if (!res) { + spec = codec->spec; + + if (spec->silent_stream_type) + spec->silent_stream_type = SILENT_STREAM_KAE; + } + + return res; +} + /* Intel Baytrail and Braswell; with eld notifier */ static int patch_i915_byt_hdmi(struct hda_codec *codec) { @@ -4391,10 +4463,10 @@ HDA_CODEC_ENTRY(0x80862814, "DG1 HDMI", patch_i915_tgl_hdmi), HDA_CODEC_ENTRY(0x80862815, "Alderlake HDMI", patch_i915_tgl_hdmi), HDA_CODEC_ENTRY(0x80862816, "Rocketlake HDMI", patch_i915_tgl_hdmi), HDA_CODEC_ENTRY(0x80862818, "Raptorlake HDMI", patch_i915_tgl_hdmi), -HDA_CODEC_ENTRY(0x80862819, "DG2 HDMI", patch_i915_tgl_hdmi), +HDA_CODEC_ENTRY(0x80862819, "DG2 HDMI", patch_i915_adlp_hdmi), HDA_CODEC_ENTRY(0x8086281a, "Jasperlake HDMI", patch_i915_icl_hdmi), HDA_CODEC_ENTRY(0x8086281b, "Elkhartlake HDMI", patch_i915_icl_hdmi), -HDA_CODEC_ENTRY(0x8086281c, "Alderlake-P HDMI", patch_i915_tgl_hdmi), +HDA_CODEC_ENTRY(0x8086281c, "Alderlake-P HDMI", patch_i915_adlp_hdmi), HDA_CODEC_ENTRY(0x80862880, "CedarTrail HDMI", patch_generic_hdmi), HDA_CODEC_ENTRY(0x80862882, "Valleyview2 HDMI", patch_i915_byt_hdmi), HDA_CODEC_ENTRY(0x80862883, "Braswell HDMI", patch_i915_byt_hdmi), base-commit: fc30f8dd54d4b42ace4e0bcf356ba2f2e1d8a2c7 -- 2.35.1

3 3

[PATCH v17 0/2] mtk: add ADSP mailbox controller for MT8195
by allen-kh.cheng 15 Feb '22

15 Feb '22

From: Allen-KH Cheng <Allen-KH.Cheng(a)mediatek.com> Mediatek ADSP IPC is used to send notification or short message between processors with dsp. It will place the message to the share buffer and will access the ADSP mailbox registers to kick dsp. Two mailboxes used to send notification or short message between processors with dsp. This patchset was tested and confirmed on MT8195 cherry board. Based on linux-next changes since v16: - fix WARNING: modpost: missing MODULE_LICENSE() in drivers/mailbox /mtk-adsp-mailbox.o. Add MODULE_LICENSE in the last line. - Due to WARNING: Missing or malformed SPDX-License-Identifier tag in line 1 in checkpatch, we don't remove SPDX-License in line 1. changes since v15: - add paragraphs to describe the config symbols fully changes since v14: - add inline for get_mtk_adsp_mbox_priv changes since v13: - rebase on v5.16-rc8 - add back ptr check from of_device_get_match_data changes since v12: - remove of_device_get_match_data ptr check: of_device_get_match_data(dev) will never going to return NULL. driver probe with compatible mediatek,mt8195-adsp-mbox. changes since v11: - remove useless MODULE_LICENSE changes since v10: - split up v9 into two separate submissions changes since v9: - rename adsp_mbox_chan_ops to mtk_adsp_mbox_chan_ops changes since v8: - remove struct adsp_mbox_ch_info - add get_mtk_adsp_mbox_priv - use mtk_adsp_mbox_priv va_mboxreg address in adsp mbox driver - add struct mtk_adsp_mbox_cfg for DSP mbox register offset - remove adsp mbox register offset hard code define - remove mtk-adsp-ipc.h reference in adsp mbox driver changes since v7: - add mtk prefix for adsp ipc functions - rename adsp_mbox_ch_info to mtk_adsp_mbox_ch_info - remove incorrect reviewers in commit message changes since v6: - dt-bindings: change example dtsi node. - rename config MTK_ADSP_IPC_MBOX to MTK_ADSP_MBOX - remove unused variable - add reviewers changes since v5: - remove some redundant code changes since v4: - use switch ... case in adsp_ipc_recv - add error handling path for chan_name pointer - refine some code to be concise changes since v3: - reorder MTK_ADSP_IPC_MBOX config - remove some redundant code - remove lock in mtk-adsp-mailbox changes since v2: - separate adsp_mailbox into two instances changes since v1: - fix dt_binding_check error Allen-KH Cheng (2): dt-bindings: mailbox: add mtk adsp-mbox document mailbox: mediatek: add support for adsp mailbox controller .../bindings/mailbox/mtk,adsp-mbox.yaml | 52 ++++++ drivers/mailbox/Kconfig | 9 + drivers/mailbox/Makefile | 2 + drivers/mailbox/mtk-adsp-mailbox.c | 176 ++++++++++++++++++ 4 files changed, 239 insertions(+) create mode 100644 Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml create mode 100644 drivers/mailbox/mtk-adsp-mailbox.c -- 2.18.0

2 4

[PATCH] ASoC: tegra20: spdif: make const array rates static
by Colin Ian King 15 Feb '22

15 Feb '22

Don't populate the read-only const array rates on the stack but instead it static. Also makes the object code a little smaller. Signed-off-by: Colin Ian King <colin.i.king(a)gmail.com> --- sound/soc/tegra/tegra20_spdif.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/tegra/tegra20_spdif.c b/sound/soc/tegra/tegra20_spdif.c index d09cd7ee6879..64c2f304f254 100644 --- a/sound/soc/tegra/tegra20_spdif.c +++ b/sound/soc/tegra/tegra20_spdif.c @@ -186,7 +186,7 @@ static int tegra20_spdif_filter_rates(struct snd_pcm_hw_params *params, struct snd_soc_dai *dai = rule->private; struct tegra20_spdif *spdif = dev_get_drvdata(dai->dev); struct clk *parent = clk_get_parent(spdif->clk_spdif_out); - const unsigned int rates[] = { 32000, 44100, 48000 }; + static const unsigned int rates[] = { 32000, 44100, 48000 }; long i, parent_rate, valid_rates = 0; parent_rate = clk_get_rate(parent); -- 2.34.1

2 1

[PATCH] ASoC: soc-core: skip zero num_dai component in searching dai name
by Shengjiu Wang 15 Feb '22

15 Feb '22

In the case like dmaengine which's not a dai but as a component, the num_dai is zero, dmaengine component has the same component_of_node as cpu dai, when cpu dai component is not ready, but dmaengine component is ready, try to get cpu dai name, the snd_soc_get_dai_name() return -EINVAL, not -EPROBE_DEFER, that cause below error: asoc-simple-card <card name>: parse error -22 asoc-simple-card: probe of <card name> failed with error -22 The sound card failed to probe. So this patch fixes the issue above by skipping the zero num_dai component in searching dai name. Signed-off-by: Shengjiu Wang <shengjiu.wang(a)nxp.com> --- sound/soc/soc-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 434e61b46983..a088bc9f7dd7 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -3233,7 +3233,7 @@ int snd_soc_get_dai_name(const struct of_phandle_args *args, for_each_component(pos) { struct device_node *component_of_node = soc_component_to_node(pos); - if (component_of_node != args->np) + if (component_of_node != args->np || !pos->num_dai) continue; ret = snd_soc_component_of_xlate_dai_name(pos, args, dai_name); -- 2.17.1

2 1

[PATCH v2] ASoC: SOF: Makefile: Fix randconfig sof-client build when SND_SOC_SOF=y
by Peter Ujfalusi 15 Feb '22

15 Feb '22

Intel's kernel test robot found the following randconfig combination: SND_SOC_SOF=y SND_SOC_SOF_CLIENT=m In this the sof-client object is not going to be built into the snd-sof.o and we will have undefined references to the sof-client functions. Fixes: 6955d9512d0e ("ASoC: SOF: Introduce IPC SOF client support") Reported-by: kernel test robot <lkp(a)intel.com> Signed-off-by: Peter Ujfalusi <Peter Ujfalusi <peter.ujfalusi(a)linux.intel.com>> --- Hi Mark, Pierre, Changes since v1: - fix author and SoB from gmail.com to linux.intel.com When the client support was added we did some permutation tests (at least I did) but missed this combination. It is a valid one for sure and the proper fix is via the Makefile. Sorry for mising this Regards, Peter sound/soc/sof/Makefile | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/soc/sof/Makefile b/sound/soc/sof/Makefile index 4d31282c847d..a0459f06c68a 100644 --- a/sound/soc/sof/Makefile +++ b/sound/soc/sof/Makefile @@ -2,7 +2,9 @@ snd-sof-objs := core.o ops.o loader.o ipc.o pcm.o pm.o debug.o topology.o\ control.o trace.o iomem-utils.o sof-audio.o stream-ipc.o -snd-sof-$(CONFIG_SND_SOC_SOF_CLIENT) += sof-client.o +ifneq ($(CONFIG_SND_SOC_SOF_CLIENT),) +snd-sof-objs += sof-client.o +endif snd-sof-$(CONFIG_SND_SOC_SOF_COMPRESS) += compress.o -- 2.35.1

2 1

[PATCH] ASoC: cs4265: Fix the duplicated control name
by Fabio Estevam 15 Feb '22

15 Feb '22

From: Fabio Estevam <festevam(a)denx.de> Currently, the following error messages are seen during boot: asoc-simple-card sound: control 2:0:0:SPDIF Switch:0 is already present cs4265 1-004f: ASoC: failed to add widget SPDIF dapm kcontrol SPDIF Switch: -16 Quoting Mark Brown: "The driver is just plain buggy, it defines both a regular SPIDF Switch control and a SND_SOC_DAPM_SWITCH() called SPDIF both of which will create an identically named control, it can never have loaded without error. One or both of those has to be renamed." Rename it from "SPDIF Switch" to "SPDIF" to avoid the name confict. Signed-off-by: Fabio Estevam <festevam(a)denx.de> --- sound/soc/codecs/cs4265.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/cs4265.c b/sound/soc/codecs/cs4265.c index c338c9f6cf91..8891e9275cba 100644 --- a/sound/soc/codecs/cs4265.c +++ b/sound/soc/codecs/cs4265.c @@ -150,7 +150,7 @@ static const struct snd_kcontrol_new cs4265_snd_controls[] = { SOC_SINGLE("E to F Buffer Disable Switch", CS4265_SPDIF_CTL1, 6, 1, 0), SOC_ENUM("C Data Access", cam_mode_enum), - SOC_SINGLE("SPDIF Switch", CS4265_SPDIF_CTL2, 5, 1, 1), + SOC_SINGLE("SPDIF", CS4265_SPDIF_CTL2, 5, 1, 1), SOC_SINGLE("Validity Bit Control Switch", CS4265_SPDIF_CTL2, 3, 1, 0), SOC_ENUM("SPDIF Mono/Stereo", spdif_mono_stereo_enum), -- 2.25.1

2 3

[PATCH] ASoC: codec: wm8960: complete discharge on BIAS OFF->STANDBY
by Viorel Suman (OSS) 15 Feb '22

15 Feb '22

From: Viorel Suman <viorel.suman(a)nxp.com> On BIAS STANDBY->OFF transition the current implementation sleeps 600ms on suspend in order to discharge the chip. The suspend is propagated from "snd_soc_suspend" call for all audio cards in a serial fashion, thus in case of boards like i.MX8DXL EVK which has 3 distinct WM8960 codecs the total cumulated sleep on suspend is 1.8 seconds. On the other hand the BIAS OFF->STANDBY transition happens asynchronously with regard to "snd_soc_resume" - the call is propagated from "soc_resume_deferred" which is just scheduled from "snd_soc_resume", each card having its own work scheduled to execute "soc_resume_deferred" call. The patch performs discharge completion on BIAS OFF->STANDBY transition so that the cumulated effect on suspend described above is avoided and discharge is completed in paralel in case of multiple WM8960 codecs on the board. Signed-off-by: Viorel Suman <viorel.suman(a)nxp.com> --- sound/soc/codecs/wm8960.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c index 75de6a81465df..b7a2246184e08 100644 --- a/sound/soc/codecs/wm8960.c +++ b/sound/soc/codecs/wm8960.c @@ -45,6 +45,8 @@ #define WM8960_DISOP 0x40 #define WM8960_DRES_MASK 0x30 +#define WM8960_DSCH_TOUT 600 /* discharge timeout, ms */ + static bool is_pll_freq_available(unsigned int source, unsigned int target); static int wm8960_set_pll(struct snd_soc_component *component, unsigned int freq_in, unsigned int freq_out); @@ -133,6 +135,7 @@ struct wm8960_priv { int freq_in; bool is_stream_in_use[2]; struct wm8960_data pdata; + ktime_t dsch_start; }; #define wm8960_reset(c) regmap_write(c, WM8960_RESET, 0) @@ -898,6 +901,7 @@ static int wm8960_set_bias_level_out3(struct snd_soc_component *component, struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component); u16 pm2 = snd_soc_component_read(component, WM8960_POWER2); int ret; + ktime_t tout; switch (level) { case SND_SOC_BIAS_ON: @@ -944,6 +948,11 @@ static int wm8960_set_bias_level_out3(struct snd_soc_component *component, case SND_SOC_BIAS_STANDBY: if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) { + /* ensure discharge is complete */ + tout = WM8960_DSCH_TOUT - ktime_ms_delta(ktime_get(), wm8960->dsch_start); + if (tout > 0) + msleep(tout); + regcache_sync(wm8960->regmap); /* Enable anti-pop features */ @@ -973,9 +982,9 @@ static int wm8960_set_bias_level_out3(struct snd_soc_component *component, WM8960_POBCTRL | WM8960_SOFT_ST | WM8960_BUFDCOPEN | WM8960_BUFIOEN); - /* Disable VMID and VREF, let them discharge */ + /* Disable VMID and VREF, mark discharge */ snd_soc_component_write(component, WM8960_POWER1, 0); - msleep(600); + wm8960->dsch_start = ktime_get(); break; } -- 2.26.3

3 2

[PATCH] conf: Remove left justification for SND_CONFIG_TYPE_REAL
by Simon Christensson 15 Feb '22

15 Feb '22

In order to avoid extra padding replace data type "%-16g" (left justification) with default right justification "%16g" when printing snd_config type SND_CONFIG_TYPE_REAL. Example for control "min_dB" available in softvol: Before patch: "min_dB -50 " After patch: "min_dB -50.0"

1 0

[PATCH 0/2] Add Euro Headset support for wcd938x codec
by Srinivasa Rao Mandadapu 15 Feb '22

15 Feb '22

This patch set is to add switch control for selecting CTIA/OMTP Headset Srinivasa Rao Mandadapu (2): ASoC: codec: wcd938x: Add switch control for selecting CTIA/OMTP Headset ASoC: dt-bindings: wcd938x: Add gpio property for selecting CTIA/OMTP headset .../devicetree/bindings/sound/qcom,wcd938x.yaml | 4 +++ sound/soc/codecs/wcd938x.c | 38 ++++++++++++++++++++++ 2 files changed, 42 insertions(+) -- 2.7.4

3 5

[PATCH 0/9] use GFP_KERNEL
by Julia Lawall 15 Feb '22

15 Feb '22

Platform_driver and pci_driver probe functions aren't called with locks held and thus don't need GFP_ATOMIC. Use GFP_KERNEL instead. All changes have been compile-tested. --- drivers/ata/pata_mpc52xx.c | 2 +- drivers/crypto/ux500/cryp/cryp_core.c | 2 +- drivers/crypto/ux500/hash/hash_core.c | 2 +- drivers/media/pci/cx18/cx18-driver.c | 2 +- drivers/media/platform/fsl-viu.c | 2 +- drivers/message/fusion/mptspi.c | 2 +- drivers/mfd/sta2x11-mfd.c | 2 +- drivers/mtd/devices/spear_smi.c | 2 +- drivers/net/ethernet/moxa/moxart_ether.c | 4 ++-- sound/soc/intel/boards/bytcr_wm5102.c | 2 +- 10 files changed, 11 insertions(+), 11 deletions(-)

5 5