February 2022 - Alsa-devel - mailman.alsa-project.org

[PATCH v4 1/2] ALSA: core: remove initialise static variables to 0
by Meng Tang 28 Feb '22

28 Feb '22

Initializing the static variable to 0 causes the following error when exec checkpatch: ERROR: do not initialise statics to 0 FILE: sound/sound_core.c:142: static int preclaim_oss = 0; In addition, considering the following way of writing 139: #ifdef config_sound_oss_core_preclaim 140: Static int preclaim_oss = 1; 141: #ELSE 142: Static int preclaim_oss = 0; 143: #ENDIF We can optimize it by IS_ENABLED(CONFIG_SOUND_OSS_CORE_PRECLAIM), so modified it to static int preclaim_oss = IS_ENABLED(CONFIG_SOUND_OSS_CORE_PRECLAIM); Signed-off-by: Meng Tang <tangmeng(a)uniontech.com> Signed-off-by: Joe Perches <joe(a)perches.com> --- sound/sound_core.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/sound/sound_core.c b/sound/sound_core.c index 90d118cd9164..aa4a57e488e5 100644 --- a/sound/sound_core.c +++ b/sound/sound_core.c @@ -136,11 +136,7 @@ struct sound_unit * All these clutters are scheduled to be removed along with * sound-slot/service-* module aliases. */ -#ifdef CONFIG_SOUND_OSS_CORE_PRECLAIM -static int preclaim_oss = 1; -#else -static int preclaim_oss = 0; -#endif +static int preclaim_oss = IS_ENABLED(CONFIG_SOUND_OSS_CORE_PRECLAIM); module_param(preclaim_oss, int, 0444); -- 2.20.1

4 6

[PATCH] ALSA: spi: Add check for clk_enable()
by Jiasheng Jiang 28 Feb '22

28 Feb '22

As the potential failure of the clk_enable(), it should be better to check it and return error if fails. Fixes: 3568459a5113 ("ALSA: at73c213: manage SSC clock") Signed-off-by: Jiasheng Jiang <jiasheng(a)iscas.ac.cn> --- sound/spi/at73c213.c | 27 +++++++++++++++++++++------ 1 file changed, 21 insertions(+), 6 deletions(-) diff --git a/sound/spi/at73c213.c b/sound/spi/at73c213.c index 76c0e37a838c..8a2da6b1012e 100644 --- a/sound/spi/at73c213.c +++ b/sound/spi/at73c213.c @@ -218,7 +218,9 @@ static int snd_at73c213_pcm_open(struct snd_pcm_substream *substream) runtime->hw = snd_at73c213_playback_hw; chip->substream = substream; - clk_enable(chip->ssc->clk); + err = clk_enable(chip->ssc->clk); + if (err) + return err; return 0; } @@ -776,7 +778,9 @@ static int snd_at73c213_chip_init(struct snd_at73c213 *chip) goto out; /* Enable DAC master clock. */ - clk_enable(chip->board->dac_clk); + retval = clk_enable(chip->board->dac_clk); + if (retval) + goto out; /* Initialize at73c213 on SPI bus. */ retval = snd_at73c213_write_reg(chip, DAC_RST, 0x04); @@ -889,7 +893,9 @@ static int snd_at73c213_dev_init(struct snd_card *card, chip->card = card; chip->irq = -1; - clk_enable(chip->ssc->clk); + retval = clk_enable(chip->ssc->clk); + if (retval) + return retval; retval = request_irq(irq, snd_at73c213_interrupt, 0, "at73c213", chip); if (retval) { @@ -1008,7 +1014,9 @@ static int snd_at73c213_remove(struct spi_device *spi) int retval; /* Stop playback. */ - clk_enable(chip->ssc->clk); + retval = clk_enable(chip->ssc->clk); + if (retval) + goto out; ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXDIS)); clk_disable(chip->ssc->clk); @@ -1088,9 +1096,16 @@ static int snd_at73c213_resume(struct device *dev) { struct snd_card *card = dev_get_drvdata(dev); struct snd_at73c213 *chip = card->private_data; + int retval; - clk_enable(chip->board->dac_clk); - clk_enable(chip->ssc->clk); + retval = clk_enable(chip->board->dac_clk); + if (retval) + return retval; + retval = clk_enable(chip->ssc->clk); + if (retval) { + clk_disable(chip->board->dac_clk); + return retval; + } ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXEN)); return 0; -- 2.25.1

2 1

[PATCH] sound/mips: Use platform_get_irq() to get the interrupt
by Meng Tang 28 Feb '22

28 Feb '22

platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypassed the hierarchical setup and messed up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by: Meng Tang <tangmeng(a)uniontech.com> --- sound/mips/snd-n64.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/sound/mips/snd-n64.c b/sound/mips/snd-n64.c index 463a6fe589eb..bff6d85b8fe2 100644 --- a/sound/mips/snd-n64.c +++ b/sound/mips/snd-n64.c @@ -289,8 +289,7 @@ static int __init n64audio_probe(struct platform_device *pdev) struct snd_card *card; struct snd_pcm *pcm; struct n64audio *priv; - struct resource *res; - int err; + int err, irq; err = snd_card_new(&pdev->dev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1, @@ -337,12 +336,12 @@ static int __init n64audio_probe(struct platform_device *pdev) strcpy(card->shortname, "N64 Audio"); strcpy(card->longname, "N64 Audio"); - res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!res) { + irq = platform_get_irq(pdev, 0); + if (irq < 0) { err = -EINVAL; goto fail_dma_alloc; } - if (devm_request_irq(&pdev->dev, res->start, n64audio_isr, + if (devm_request_irq(&pdev->dev, irq, n64audio_isr, IRQF_SHARED, "N64 Audio", priv)) { err = -EBUSY; goto fail_dma_alloc; -- 2.20.1

2 1

[PATCH V0 0/1] ALSA: pcm: fix blocking while loop in
by Raghu Bankapur 28 Feb '22

28 Feb '22

When period interrupts are disabled, while loop in snd_pcm_update_hw_ptr0() results in the machine locking up if runtime->hw_ptr_buffer_jiffies is 0. Validate runtime->hw_ptr_buffer_jiffies value before while loop to avoid delta check. when runtime->hw_ptr_buffer_jiffies is 0 then update of while condition hdelta > xrun_threshold will be always true because hdelta will not change. This will lead to infinite loop causing lock-up This issue found during stability test, below log explains CPU lock-up on CPU1 [ 922.249028] sched: RT throttling activated for rt_rq ffffffc0f9970778 (cpu 1) [ 922.249028] potential CPU hogs: [ 922.249028] **FastCapture (11426) [ 922.249105] ------------[ cut here ]--------- To fix this lock-up issue, added new condition to check if runtime-> hw_ptr_buffer_jiffies is ZERO or negative. Raghu Bankapur (1): ALSA: pcm: fix blocking while loop in snd_pcm_update_hw_ptr0() sound/core/pcm_lib.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) -- 2.17.1

4 5

Add UCM for PinePhone
by GitHub pull_request - edited 28 Feb '22

28 Feb '22

alsa-project/alsa-ucm-conf pull request #134 was edited from tomfitzhenry: Fixes https://github.com/alsa-project/alsa-ucm-conf/issues/124. The device-tree configuration has had a unique audio card name since 5.14: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arc… This UCM config is copied from https://gitlab.com/pine64-org/pine64-alsa-ucm/, which was developed by many developers ( https://gitlab.com/pine64-org/pine64-alsa-ucm/-/merge_requests/1 ) and is BSD-3-Clause licensed. I have tested that with this PR, the PinePhone has the expected HiFi and VoiceCall profiles.This testing found that the `File` directive in `SectionUseCase` needs to be absolute (for the symlink to work). I've fixed this in this PR: https://github.com/alsa-project/alsa-ucm-conf/pull/134/commits/5059e57a2197…. See also: * `alsa-info`: https://alsa-project.org/db/?f=5e331f5ef10bd167b3bd7640bfcf0e879100f80d * `pa-info`: [pa-info.txt](https://github.com/alsa-project/alsa-ucm-conf/files/8015083/pa… * https://gitlab.com/pine64-org/pine64-alsa-ucm/-/issues/3 Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/134 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/134.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH v2 0/3] soundwire: qcom: add pm runtime support
by Srinivas Kandagatla 28 Feb '22

28 Feb '22

This patchset adds pm runtime support to Qualcomm SounWire Controller using SoundWire Clock Stop and Wake up using Headset events on supported instances and instances like WSA which do not support clock stop a soft reset of controller along with full rest of slaves is done to resume from a low power state. Tested it on SM8250 MTP and Dragon Board DB845c --srini Changes since v1: - updated wake irq to not deal with slave pm runtime directly. - added delay after soft reset of SoundWire controller where clock stop is not supported Srinivas Kandagatla (3): soundwire: qcom: add runtime pm support dt-bindings: soundwire: qcom: document optional wake irq soundwire: qcom: add in-band wake up interrupt support .../bindings/soundwire/qcom,sdw.txt | 2 +- drivers/soundwire/qcom.c | 202 +++++++++++++++++- 2 files changed, 202 insertions(+), 2 deletions(-) -- 2.21.0

3 8

ucm2: add additional symlink for Pinebook Pro
by GitHub pull_request - opened 28 Feb '22

28 Feb '22

alsa-project/alsa-ucm-conf pull request #140 was opened from kmcopper: since 907f0a305186 ASoC: simple-card: Fill in driver name of the linux kernel, the base name is simple-card instead of rockchip_es8316 Fixes: 85eea19783cf ("ucm2: Add UCM support for rockchip_es8316 on Pinebook Pro") Signed-off-by: Kyle Copperfield <kmcopper(a)danwin1210.me> Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/140 Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/140.patch Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

[PATCH v3 1/2] ALSA: core: remove initialise static variables to 0
by Meng Tang 28 Feb '22

28 Feb '22

Initializing the static variable to 0 causes the following error when exec checkpatch: ERROR: do not initialise statics to 0 FILE: sound/sound_core.c:142: static int preclaim_oss = 0; In addition, considering the following way of writing 139: #ifdef config_sound_oss_core_preclaim 140: Static int preclaim_oss = 1; 141: #ELSE 142: Static int preclaim_oss = 0; 143: #ENDIF We can optimize it by IS_ENABLED(CONFIG_SOUND_OSS_CORE_PRECLAIM), so modified it to static int preclaim_oss = IS_ENABLED(CONFIG_SOUND_OSS_CORE_PRECLAIM); Signed-off-by: Meng Tang <tangmeng(a)uniontech.com> Signed-off-by: JOE Perches <joe(a)perches.com> --- sound/sound_core.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/sound/sound_core.c b/sound/sound_core.c index 90d118cd9164..aa4a57e488e5 100644 --- a/sound/sound_core.c +++ b/sound/sound_core.c @@ -136,11 +136,7 @@ struct sound_unit * All these clutters are scheduled to be removed along with * sound-slot/service-* module aliases. */ -#ifdef CONFIG_SOUND_OSS_CORE_PRECLAIM -static int preclaim_oss = 1; -#else -static int preclaim_oss = 0; -#endif +static int preclaim_oss = IS_ENABLED(CONFIG_SOUND_OSS_CORE_PRECLAIM); module_param(preclaim_oss, int, 0444); -- 2.20.1

2 2

[PATCH v2 1/2] ALSA: core: remove initialise static variables to 0
by Meng Tang 28 Feb '22

28 Feb '22

Initializing the static variable to 0 causes the following error when exec checkpatch: ERROR: do not initialise statics to 0 FILE: sound/sound_core.c:142: static int preclaim_oss = 0; In addition, considering the following way of writing 139: #ifdef config_sound_oss_core_preclaim 140: Static int preclaim_oss = 1; 141: #ELSE 142: Static int preclaim_oss = 0; 143: #ENDIF We can optimize it by IS_ENABLED(CONFIG_SOUND_OSS_CORE_PRECLAIM), so modified it to static int preclaim_oss = IS_ENABLED(CONFIG_SOUND_OSS_CORE_PRECLAIM); Signed-off-by: Meng Tang <tangmeng(a)uniontech.com> --- sound/sound_core.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/sound/sound_core.c b/sound/sound_core.c index 90d118cd9164..aa4a57e488e5 100644 --- a/sound/sound_core.c +++ b/sound/sound_core.c @@ -136,11 +136,7 @@ struct sound_unit * All these clutters are scheduled to be removed along with * sound-slot/service-* module aliases. */ -#ifdef CONFIG_SOUND_OSS_CORE_PRECLAIM -static int preclaim_oss = 1; -#else -static int preclaim_oss = 0; -#endif +static int preclaim_oss = IS_ENABLED(CONFIG_SOUND_OSS_CORE_PRECLAIM); module_param(preclaim_oss, int, 0444); -- 2.20.1

3 3

[PATCH 1/2] ALSA: core: remove initialise static variables to 0
by Meng Tang 27 Feb '22

27 Feb '22

Initializing the static variable to 0 causes the following error when exec checkpatch: ERROR: do not initialise statics to 0 FILE: sound/sound_core.c:142: static int preclaim_oss = 0; Static variable does not need to be initialised to 0, because compiler will initialise all uninitialised statics to 0. Thus, remove the unneeded initializations. Signed-off-by: Meng Tang <tangmeng(a)uniontech.com> --- sound/sound_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/sound_core.c b/sound/sound_core.c index 90d118cd9164..2ee54070b2b5 100644 --- a/sound/sound_core.c +++ b/sound/sound_core.c @@ -139,7 +139,7 @@ struct sound_unit #ifdef CONFIG_SOUND_OSS_CORE_PRECLAIM static int preclaim_oss = 1; #else -static int preclaim_oss = 0; +static int preclaim_oss; #endif module_param(preclaim_oss, int, 0444); -- 2.20.1

2 2