December 2022 - Alsa-devel - mailman.alsa-project.org

[PATCH AUTOSEL 6.0 06/73] ASoC: codecs: rt298: Add quirk for KBL-R RVP platform
by Sasha Levin 18 Dec '22

18 Dec '22

From: Amadeusz Sławiński <amadeuszx.slawinski(a)linux.intel.com> [ Upstream commit 953dbd1cef18ce9ac0d69c1bd735b929fe52a17e ] KBL-R RVP platforms also use combojack, so we need to enable that configuration for them. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski(a)linux.intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski(a)intel.com> Link: https://lore.kernel.org/r/20221010121955.718168-4-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/codecs/rt298.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/soc/codecs/rt298.c b/sound/soc/codecs/rt298.c index b0b53d4f07df..5f36064ed6e6 100644 --- a/sound/soc/codecs/rt298.c +++ b/sound/soc/codecs/rt298.c @@ -1166,6 +1166,13 @@ static const struct dmi_system_id force_combo_jack_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Geminilake") } }, + { + .ident = "Intel Kabylake R RVP", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Intel Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "Kabylake Client platform") + } + }, { } }; -- 2.35.1

1 0

[PATCH AUTOSEL 6.1 67/85] ASoC: amd: yc: Add Xiaomi Redmi Book Pro 14 2022 into DMI table
by Sasha Levin 18 Dec '22

18 Dec '22

From: Artem Lukyanov <dukzcry(a)ya.ru> [ Upstream commit c1dd6bf6199752890d8c59d895dd45094da51d1f ] This model requires an additional detection quirk to enable the internal microphone - BIOS doesn't seem to support AcpDmicConnected (nothing in acpidump output). Signed-off-by: Artem Lukyanov <dukzcry(a)ya.ru> Link: https://lore.kernel.org/r/20221130085247.85126-1-dukzcry@ya.ru Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/amd/yc/acp6x-mach.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/soc/amd/yc/acp6x-mach.c b/sound/soc/amd/yc/acp6x-mach.c index d9715bea965e..1f0b5527c594 100644 --- a/sound/soc/amd/yc/acp6x-mach.c +++ b/sound/soc/amd/yc/acp6x-mach.c @@ -213,6 +213,13 @@ static const struct dmi_system_id yc_acp_quirk_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m17 R5 AMD"), } }, + { + .driver_data = &acp6x_card, + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "TIMI"), + DMI_MATCH(DMI_PRODUCT_NAME, "Redmi Book Pro 14 2022"), + } + }, {} }; -- 2.35.1

1 0

[PATCH AUTOSEL 6.1 63/85] ALSA: usb-audio: Add quirk for Tascam Model 12
by Sasha Levin 18 Dec '22

18 Dec '22

From: John Keeping <john(a)metanate.com> [ Upstream commit 67df411db3f0209e4bb5227d4dd9d41b21368b9d ] Tascam's Model 12 is a mixer which can also operate as a USB audio interface. The audio interface uses explicit feedback but it seems that it does not correctly handle missing isochronous frames. When injecting an xrun (or doing anything else that pauses the playback stream) the feedback rate climbs (for example, at 44,100Hz nominal, I see a stable rate around 44,099 but xrun injection sees this peak at around 44,135 in most cases) and glitches are heard in the audio stream for several seconds - this is significantly worse than the single glitch expected for an underrun. While the stream does normally recover and the feedback rate returns to a stable value, I have seen some occurrences where this does not happen and the rate continues to increase while no audio is heard from the output. I have not found a solid reproduction for this. This misbehaviour can be avoided by totally resetting the stream state by switching the interface to alt 0 and back before restarting the playback stream. Add a new quirk flag which forces the endpoint and interface to be reconfigured whenever the stream is stopped, and use this for the Tascam Model 12. Separate interfaces are used for the playback and capture endpoints, so resetting the playback interface here will not affect the capture stream if it is running. While there are two endpoints on the interface, these are the OUT data endpoint and the IN explicit feedback endpoint corresponding to it and these are always stopped and started together. Signed-off-by: John Keeping <john(a)metanate.com> Link: https://lore.kernel.org/r/20221129130100.1257904-1-john@metanate.com Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/usb/endpoint.c | 7 +++++++ sound/usb/quirks.c | 2 ++ sound/usb/usbaudio.h | 4 ++++ 3 files changed, 13 insertions(+) diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c index 310cd6fb0038..4aaf0784940b 100644 --- a/sound/usb/endpoint.c +++ b/sound/usb/endpoint.c @@ -1673,6 +1673,13 @@ void snd_usb_endpoint_stop(struct snd_usb_endpoint *ep, bool keep_pending) stop_urbs(ep, false, keep_pending); if (ep->clock_ref) atomic_dec(&ep->clock_ref->locked); + + if (ep->chip->quirk_flags & QUIRK_FLAG_FORCE_IFACE_RESET && + usb_pipeout(ep->pipe)) { + ep->need_prepare = true; + if (ep->iface_ref) + ep->iface_ref->need_setup = true; + } } } diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 0f4dd3503a6a..58b37bfc885c 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -2044,6 +2044,8 @@ static const struct usb_audio_quirk_flags_table quirk_flags_table[] = { DEVICE_FLG(0x0644, 0x804a, /* TEAC UD-301 */ QUIRK_FLAG_ITF_USB_DSD_DAC | QUIRK_FLAG_CTL_MSG_DELAY | QUIRK_FLAG_IFACE_DELAY), + DEVICE_FLG(0x0644, 0x805f, /* TEAC Model 12 */ + QUIRK_FLAG_FORCE_IFACE_RESET), DEVICE_FLG(0x06f8, 0xb000, /* Hercules DJ Console (Windows Edition) */ QUIRK_FLAG_IGNORE_CTL_ERROR), DEVICE_FLG(0x06f8, 0xd002, /* Hercules DJ Console (Macintosh Edition) */ diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h index e97141ef730a..2aba508a4831 100644 --- a/sound/usb/usbaudio.h +++ b/sound/usb/usbaudio.h @@ -172,6 +172,9 @@ extern bool snd_usb_skip_validation; * Don't apply implicit feedback sync mode * QUIRK_FLAG_IFACE_SKIP_CLOSE * Don't closed interface during setting sample rate + * QUIRK_FLAG_FORCE_IFACE_RESET + * Force an interface reset whenever stopping & restarting a stream + * (e.g. after xrun) */ #define QUIRK_FLAG_GET_SAMPLE_RATE (1U << 0) @@ -194,5 +197,6 @@ extern bool snd_usb_skip_validation; #define QUIRK_FLAG_GENERIC_IMPLICIT_FB (1U << 17) #define QUIRK_FLAG_SKIP_IMPLICIT_FB (1U << 18) #define QUIRK_FLAG_IFACE_SKIP_CLOSE (1U << 19) +#define QUIRK_FLAG_FORCE_IFACE_RESET (1U << 20) #endif /* __USBAUDIO_H */ -- 2.35.1

1 0

[PATCH AUTOSEL 6.1 07/85] ASoC: Intel: avs: Add quirk for KBL-R RVP platform
by Sasha Levin 18 Dec '22

18 Dec '22

From: Amadeusz Sławiński <amadeuszx.slawinski(a)linux.intel.com> [ Upstream commit 9d0737fa0e7530313634c0ecd75f09a95ba8d44a ] KBL-R RVPs contain built-in rt298 codec which requires different PLL clock and .dai_fmt configuration than seen on other boards. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski(a)linux.intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski(a)intel.com> Link: https://lore.kernel.org/r/20221010121955.718168-5-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/intel/avs/boards/rt298.c | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-) diff --git a/sound/soc/intel/avs/boards/rt298.c b/sound/soc/intel/avs/boards/rt298.c index b28d36872dcb..58c9d9edecf0 100644 --- a/sound/soc/intel/avs/boards/rt298.c +++ b/sound/soc/intel/avs/boards/rt298.c @@ -6,6 +6,7 @@ // Amadeusz Slawinski <amadeuszx.slawinski(a)linux.intel.com> // +#include <linux/dmi.h> #include <linux/module.h> #include <sound/jack.h> #include <sound/pcm.h> @@ -14,6 +15,16 @@ #include <sound/soc-acpi.h> #include "../../../codecs/rt298.h" +static const struct dmi_system_id kblr_dmi_table[] = { + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Intel Corporation"), + DMI_MATCH(DMI_BOARD_NAME, "Kabylake R DDR4 RVP"), + }, + }, + {} +}; + static const struct snd_kcontrol_new card_controls[] = { SOC_DAPM_PIN_SWITCH("Headphone Jack"), SOC_DAPM_PIN_SWITCH("Mic Jack"), @@ -96,9 +107,15 @@ avs_rt298_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_param { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); + unsigned int clk_freq; int ret; - ret = snd_soc_dai_set_sysclk(codec_dai, RT298_SCLK_S_PLL, 19200000, SND_SOC_CLOCK_IN); + if (dmi_first_match(kblr_dmi_table)) + clk_freq = 24000000; + else + clk_freq = 19200000; + + ret = snd_soc_dai_set_sysclk(codec_dai, RT298_SCLK_S_PLL, clk_freq, SND_SOC_CLOCK_IN); if (ret < 0) dev_err(rtd->dev, "Set codec sysclk failed: %d\n", ret); @@ -139,7 +156,10 @@ static int avs_create_dai_link(struct device *dev, const char *platform_name, in dl->platforms = platform; dl->num_platforms = 1; dl->id = 0; - dl->dai_fmt = SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS; + if (dmi_first_match(kblr_dmi_table)) + dl->dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS; + else + dl->dai_fmt = SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS; dl->init = avs_rt298_codec_init; dl->be_hw_params_fixup = avs_rt298_be_fixup; dl->ops = &avs_rt298_ops; -- 2.35.1

1 0

[PATCH AUTOSEL 6.1 06/85] ASoC: codecs: rt298: Add quirk for KBL-R RVP platform
by Sasha Levin 18 Dec '22

18 Dec '22

From: Amadeusz Sławiński <amadeuszx.slawinski(a)linux.intel.com> [ Upstream commit 953dbd1cef18ce9ac0d69c1bd735b929fe52a17e ] KBL-R RVP platforms also use combojack, so we need to enable that configuration for them. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski(a)linux.intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski(a)intel.com> Link: https://lore.kernel.org/r/20221010121955.718168-4-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/codecs/rt298.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/soc/codecs/rt298.c b/sound/soc/codecs/rt298.c index a2ce52dafea8..cea26f3a02b6 100644 --- a/sound/soc/codecs/rt298.c +++ b/sound/soc/codecs/rt298.c @@ -1166,6 +1166,13 @@ static const struct dmi_system_id force_combo_jack_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Geminilake") } }, + { + .ident = "Intel Kabylake R RVP", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Intel Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "Kabylake Client platform") + } + }, { } }; -- 2.35.1

1 0

No front panel profile on Xonar D1
by GitHub issues - opened 18 Dec '22

18 Dec '22

alsa-project/alsa-ucm-conf issue #252 was opened from realnc: There is no way to switch to front panel headphone output through pipewire. I have to open a terminal, run `alsamixer` and unmute the "Front Panel" element every time I want to switch to/from front panel input and output: ![image](https://user-images.githubusercontent.com/1665903/208296363-67272f79-b3b9-4783-9f75-8527f0db8457.png) I've been told by a pipewire dev that alsa-ucm-conf must provide a profile, otherwise it can't work. My sound card is an Asus Xonar D1. `alsa-info.sh`: http://alsa-project.org/db/?f=beaa1236f0889f1f0ad8474c4c1825fb9488af1f Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/252 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Dell XPS 9320: Mic-Mute LED not working
by GitHub issues - edited 18 Dec '22

18 Dec '22

alsa-project/alsa-ucm-conf issue #251 was edited from heftig: The mic-mute LED on my XPS 9320 does not work. Reading `/sys/class/sound/ctl-led/mic/card0/list` outputs `52 18`. Control 18 is the expected `rt714 FU02 Capture Switch` set in `ucm2/codecs/rt715-sdca/init.conf`. Control 52 is: ``` numid=52,iface=MIXER,name='PGA5.0 5 Master Capture Switch' ; type=BOOLEAN,access=rw------,values=2 : values=on,on ``` In this state, the LED does turn on when both switches are off, but muting via PipeWire only toggles control 18. Detaching the LED from `52` (so that only `18` remains) makes it work properly. I've tried finding out how 52 gets attached, but couldn't find anything. Is this done in-kernel? Linux 6.1 ALSA 1.2.8 Arch Linux Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/251 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Dell XPS 9320: Mic-Mute LED not working
by GitHub issues - opened 18 Dec '22

18 Dec '22

alsa-project/alsa-ucm-conf issue #251 was opened from heftig: The mic-mute LED on my XPS 9320 does not work. Reading `/sys/class/sound/ctl-led/mic/card0/list` outputs `52 18`. Control `18` is the expected `rt714 FU02 Capture Switch` set in `ucm2/codecs/rt715-sdca/init.conf`. Control `52` is: ``` numid=52,iface=MIXER,name='PGA5.0 5 Master Capture Switch' ; type=BOOLEAN,access=rw------,values=2 : values=on,on ``` In this state, the LED does turn on when both switches are off, but muting via PipeWire only toggles control 18. Detaching the LED from `52` (so that only `18` remains) makes it work properly. I've tried finding out how `52` gets attached, but couldn't find anything. Is this done in-kernel? Linux 6.1 ALSA 1.2.8 Arch Linux Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/251 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

RE: [PATCH] ASoC: amd: yc: Add Razer Blade 14 2022 into DMI table
by Limonciello, Mario 16 Dec '22

16 Dec '22

[Public] > -----Original Message----- > From: Wim Van Boven <wimvanboven(a)gmail.com> > Sent: Friday, December 16, 2022 02:18 > Cc: wimvanboven(a)gmail.com; Liam Girdwood <lgirdwood(a)gmail.com>; > Mark Brown <broonie(a)kernel.org>; Jaroslav Kysela <perex(a)perex.cz>; > Takashi Iwai <tiwai(a)suse.com>; Limonciello, Mario > <Mario.Limonciello(a)amd.com>; Saba Kareem, Syed > <Syed.SabaKareem(a)amd.com>; Leohearts <leohearts(a)leohearts.com>; > Brent Mendelsohn <mendiebm(a)gmail.com>; Xiaoyan Li > <lxy.lixiaoyan(a)gmail.com>; linkt <xazrael(a)hotmail.com>; alsa-devel@alsa- > project.org; linux-kernel(a)vger.kernel.org > Subject: [PATCH] ASoC: amd: yc: Add Razer Blade 14 2022 into DMI table > > Razer Blade 14 (2022) - RZ09-0427 needs the quirk to enable the built in > microphone > > Signed-off-by: Wim Van Boven <wimvanboven(a)gmail.com> Thanks! Link: https://bugzilla.kernel.org/show_bug.cgi?id=216801 Reviewed-by: Mario Limonciello <mario.limonciello(a)amd.com> > --- > sound/soc/amd/yc/acp6x-mach.c | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/sound/soc/amd/yc/acp6x-mach.c b/sound/soc/amd/yc/acp6x- > mach.c > index 1f0b5527c594..469c5e79e0ea 100644 > --- a/sound/soc/amd/yc/acp6x-mach.c > +++ b/sound/soc/amd/yc/acp6x-mach.c > @@ -220,6 +220,13 @@ static const struct dmi_system_id > yc_acp_quirk_table[] = { > DMI_MATCH(DMI_PRODUCT_NAME, "Redmi Book > Pro 14 2022"), > } > }, > + { > + .driver_data = &acp6x_card, > + .matches = { > + DMI_MATCH(DMI_BOARD_VENDOR, "Razer"), > + DMI_MATCH(DMI_PRODUCT_NAME, "Blade 14 > (2022) - RZ09-0427"), > + } > + }, > {} > }; > > -- > 2.38.1

1 0

aplay,axfer: Replace off64_t with off_t
by GitHub pull_request - opened 15 Dec '22

15 Dec '22

alsa-project/alsa-utils pull request #183 was opened from kraj: Also replace lseek64 with lseek. _FILE_OFFSET_BITS=64 is passed to needed platforms since configure uses AC_SYS_LARGEFILE macro. Therefore off_t is already 64-bit and lseek is same as lseek64. Additionally this fixes buils with latest musl where these lfs64 functions are moved out from _GNU_SOURCE and under _LARGEFILE64_SOURCE macro alone. This makes the builds fail on 32-bit platforms even though default off_t on musl is 64-bit always. Signed-off-by: Khem Raj <raj.khem(a)gmail.com> Request URL : https://github.com/alsa-project/alsa-utils/pull/183 Patch URL : https://github.com/alsa-project/alsa-utils/pull/183.patch Repository URL: https://github.com/alsa-project/alsa-utils

1 0