October 2022 - Alsa-devel - mailman.alsa-project.org

[PATCH] ASoC: amd: acp: Add setbias level for rt5682s codec in machine driver
by Venkata Prasad Potturu 19 Oct '22

19 Oct '22

Add set_bais_level function for rt5682s codec to enable bclk and lrclk before codec widgets power on and disable bclk and lrclk after widgets power down, to avoid pop noise Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu(a)amd.com> --- sound/soc/amd/acp/acp-mach-common.c | 62 ++++++++++++++++++++++++++--- 1 file changed, 56 insertions(+), 6 deletions(-) diff --git a/sound/soc/amd/acp/acp-mach-common.c b/sound/soc/amd/acp/acp-mach-common.c index 4c69cb6e3400..a78cf29387a7 100644 --- a/sound/soc/amd/acp/acp-mach-common.c +++ b/sound/soc/amd/acp/acp-mach-common.c @@ -167,11 +167,14 @@ static int acp_card_hs_startup(struct snd_pcm_substream *substream) &constraints_channels); snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE, &constraints_rates); - if (!drvdata->soc_mclk) { - ret = acp_clk_enable(drvdata); - if (ret < 0) { - dev_err(rtd->card->dev, "Failed to enable HS clk: %d\n", ret); - return ret; + + if (strcmp(codec_dai->name, "rt5682s-aif1") && strcmp(codec_dai->name, "rt5682s-aif2")) { + if (!drvdata->soc_mclk) { + ret = acp_clk_enable(drvdata); + if (ret < 0) { + dev_err(rtd->card->dev, "Failed to enable HS clk: %d\n", ret); + return ret; + } } } @@ -280,7 +283,6 @@ static int acp_card_rt5682s_init(struct snd_soc_pcm_runtime *rtd) static const struct snd_soc_ops acp_card_rt5682s_ops = { .startup = acp_card_hs_startup, - .shutdown = acp_card_shutdown, }; static const unsigned int dmic_channels[] = { @@ -570,6 +572,52 @@ SND_SOC_DAILINK_DEF(sof_dmic, SND_SOC_DAILINK_DEF(pdm_dmic, DAILINK_COMP_ARRAY(COMP_CPU("acp-pdm-dmic"))); +static int acp_rtk_set_bias_level(struct snd_soc_card *card, + struct snd_soc_dapm_context *dapm, + enum snd_soc_bias_level level) +{ + struct snd_soc_component *component = dapm->component; + struct acp_card_drvdata *drvdata = card->drvdata; + int ret = 0; + + if (!component) + return 0; + + if (strncmp(component->name, "i2c-RTL5682", 11) && + strncmp(component->name, "i2c-10EC1019", 12)) + return 0; + + /* + * For Realtek's codec and amplifier components, + * the lrck and bclk must be enabled brfore their all dapms be powered on, + * and must be disabled after their all dapms be powered down + * to avoid any pop. + */ + switch (level) { + case SND_SOC_BIAS_STANDBY: + if (snd_soc_dapm_get_bias_level(dapm) == SND_SOC_BIAS_OFF) { + clk_set_rate(drvdata->wclk, 48000); + clk_set_rate(drvdata->bclk, 48000 * 64); + + /* Increase bclk's enable_count */ + ret = clk_prepare_enable(drvdata->bclk); + if (ret < 0) + dev_err(component->dev, "Failed to enable bclk %d\n", ret); + } else { + /* + * Decrease bclk's enable_count. + * While the enable_count is 0, the bclk would be closed. + */ + clk_disable_unprepare(drvdata->bclk); + } + break; + default: + break; + } + + return ret; +} + int acp_sofdsp_dai_links_create(struct snd_soc_card *card) { struct snd_soc_dai_link *links; @@ -730,6 +778,7 @@ int acp_sofdsp_dai_links_create(struct snd_soc_card *card) card->dai_link = links; card->num_links = num_links; + card->set_bias_level = acp_rtk_set_bias_level; return 0; } @@ -907,6 +956,7 @@ int acp_legacy_dai_links_create(struct snd_soc_card *card) card->dai_link = links; card->num_links = num_links; + card->set_bias_level = acp_rtk_set_bias_level; return 0; } -- 2.25.1

2 1

[PATCH 2/2] ASoC: rt1308-sdw: update the preset settings
by shumingf＠realtek.com 19 Oct '22

19 Oct '22

From: Shuming Fan <shumingf(a)realtek.com> This patch updates the pad control and checks the hardware version to set the different preset settings. Signed-off-by: Shuming Fan <shumingf(a)realtek.com> --- sound/soc/codecs/rt1308-sdw.c | 17 ++++++++++++++--- sound/soc/codecs/rt1308-sdw.h | 1 + sound/soc/codecs/rt1308.h | 5 +++++ 3 files changed, 20 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/rt1308-sdw.c b/sound/soc/codecs/rt1308-sdw.c index 5c29416aa781..f99aed353f10 100644 --- a/sound/soc/codecs/rt1308-sdw.c +++ b/sound/soc/codecs/rt1308-sdw.c @@ -50,6 +50,7 @@ static bool rt1308_volatile_register(struct device *dev, unsigned int reg) case 0x3008: case 0x300a: case 0xc000: + case 0xc710: case 0xc860 ... 0xc863: case 0xc870 ... 0xc873: return true; @@ -200,6 +201,7 @@ static int rt1308_io_init(struct device *dev, struct sdw_slave *slave) { struct rt1308_sdw_priv *rt1308 = dev_get_drvdata(dev); int ret = 0; + unsigned int tmp; if (rt1308->hw_init) return 0; @@ -231,6 +233,10 @@ static int rt1308_io_init(struct device *dev, struct sdw_slave *slave) /* sw reset */ regmap_write(rt1308->regmap, RT1308_SDW_RESET, 0); + regmap_read(rt1308->regmap, 0xc710, &tmp); + rt1308->hw_ver = tmp; + dev_dbg(dev, "%s, hw_ver=0x%x\n", __func__, rt1308->hw_ver); + /* initial settings */ regmap_write(rt1308->regmap, 0xc103, 0xc0); regmap_write(rt1308->regmap, 0xc030, 0x17); @@ -246,8 +252,14 @@ static int rt1308_io_init(struct device *dev, struct sdw_slave *slave) regmap_write(rt1308->regmap, 0xc062, 0x05); regmap_write(rt1308->regmap, 0xc171, 0x07); regmap_write(rt1308->regmap, 0xc173, 0x0d); - regmap_write(rt1308->regmap, 0xc311, 0x7f); - regmap_write(rt1308->regmap, 0xc900, 0x90); + if (rt1308->hw_ver == RT1308_VER_C) { + regmap_write(rt1308->regmap, 0xc311, 0x7f); + regmap_write(rt1308->regmap, 0xc300, 0x09); + } else { + regmap_write(rt1308->regmap, 0xc311, 0x4f); + regmap_write(rt1308->regmap, 0xc300, 0x0b); + } + regmap_write(rt1308->regmap, 0xc900, 0x5a); regmap_write(rt1308->regmap, 0xc1a0, 0x84); regmap_write(rt1308->regmap, 0xc1a1, 0x01); regmap_write(rt1308->regmap, 0xc360, 0x78); @@ -257,7 +269,6 @@ static int rt1308_io_init(struct device *dev, struct sdw_slave *slave) regmap_write(rt1308->regmap, 0xc070, 0x00); regmap_write(rt1308->regmap, 0xc100, 0xd7); regmap_write(rt1308->regmap, 0xc101, 0xd7); - regmap_write(rt1308->regmap, 0xc300, 0x09); if (rt1308->first_hw_init) { regcache_cache_bypass(rt1308->regmap, false); diff --git a/sound/soc/codecs/rt1308-sdw.h b/sound/soc/codecs/rt1308-sdw.h index b5f231f708cb..62ce27799307 100644 --- a/sound/soc/codecs/rt1308-sdw.h +++ b/sound/soc/codecs/rt1308-sdw.h @@ -165,6 +165,7 @@ struct rt1308_sdw_priv { bool first_hw_init; int rx_mask; int slots; + int hw_ver; }; struct sdw_stream_data { diff --git a/sound/soc/codecs/rt1308.h b/sound/soc/codecs/rt1308.h index ff7c423e879e..d3a0f91630ca 100644 --- a/sound/soc/codecs/rt1308.h +++ b/sound/soc/codecs/rt1308.h @@ -286,4 +286,9 @@ enum { RT1308_AIFS }; +enum rt1308_hw_ver { + RT1308_VER_C = 2, + RT1308_VER_D +}; + #endif /* end of _RT1308_H_ */ -- 2.37.0

2 1

[PATCH 1/2] ASoC: rt1308-sdw: add the default value of some registers
by shumingf＠realtek.com 19 Oct '22

19 Oct '22

From: Shuming Fan <shumingf(a)realtek.com> The driver missed the default value of register 0xc070/0xc360. This patch adds that default value to avoid invalid register access when the device doesn't be enumerated yet. BugLink: https://github.com/thesofproject/linux/issues/3924 Signed-off-by: Shuming Fan <shumingf(a)realtek.com> --- sound/soc/codecs/rt1308-sdw.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/codecs/rt1308-sdw.h b/sound/soc/codecs/rt1308-sdw.h index 6668e19d85d4..b5f231f708cb 100644 --- a/sound/soc/codecs/rt1308-sdw.h +++ b/sound/soc/codecs/rt1308-sdw.h @@ -139,10 +139,12 @@ static const struct reg_default rt1308_reg_defaults[] = { { 0x3005, 0x23 }, { 0x3008, 0x02 }, { 0x300a, 0x00 }, + { 0xc000 | (RT1308_DATA_PATH << 4), 0x00 }, { 0xc003 | (RT1308_DAC_SET << 4), 0x00 }, { 0xc000 | (RT1308_POWER << 4), 0x00 }, { 0xc001 | (RT1308_POWER << 4), 0x00 }, { 0xc002 | (RT1308_POWER << 4), 0x00 }, + { 0xc000 | (RT1308_POWER_STATUS << 4), 0x00 }, }; #define RT1308_SDW_OFFSET 0xc000 -- 2.37.0

2 1

[PATCH v2] ASoC: simple-card: Fix up checks for HW param fixups
by Aidan MacDonald 19 Oct '22

19 Oct '22

The "convert-xxx" properties only have an effect for DPCM DAI links. A DAI link is only created as DPCM if the device tree requires it; part of this involves checking for the use of "convert-xxx" properties. When the convert-sample-format property was added, the checks got out of sync. A DAI link that specified only convert-sample-format but did not pass any of the other DPCM checks would not go into DPCM mode and the convert-sample-format property would be silently ignored. Fix this by adding a function to do the "convert-xxx" property checks, instead of open-coding it in simple-card and audio-graph-card. And add "convert-sample-format" to the check function so that DAI links using it will be initialized correctly. Fixes: 047a05366f4b ("ASoC: simple-card-utils: Fixup DAI sample format") Acked-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0(a)gmail.com> --- v2: Rename helper function to asoc_simple_is_convert_required() as suggested by Kuninori Morimoto. include/sound/simple_card_utils.h | 1 + sound/soc/generic/audio-graph-card.c | 2 +- sound/soc/generic/simple-card-utils.c | 15 +++++++++++++++ sound/soc/generic/simple-card.c | 3 +-- 4 files changed, 18 insertions(+), 3 deletions(-) diff --git a/include/sound/simple_card_utils.h b/include/sound/simple_card_utils.h index a0b827f0c2f6..25e049f44178 100644 --- a/include/sound/simple_card_utils.h +++ b/include/sound/simple_card_utils.h @@ -177,6 +177,7 @@ void asoc_simple_convert_fixup(struct asoc_simple_data *data, struct snd_pcm_hw_params *params); void asoc_simple_parse_convert(struct device_node *np, char *prefix, struct asoc_simple_data *data); +bool asoc_simple_is_convert_required(const struct asoc_simple_data *data); int asoc_simple_parse_routing(struct snd_soc_card *card, char *prefix); diff --git a/sound/soc/generic/audio-graph-card.c b/sound/soc/generic/audio-graph-card.c index b327372f2e4a..fe7cf972d44c 100644 --- a/sound/soc/generic/audio-graph-card.c +++ b/sound/soc/generic/audio-graph-card.c @@ -417,7 +417,7 @@ static inline bool parse_as_dpcm_link(struct asoc_simple_priv *priv, * or has convert-xxx property */ if ((of_get_child_count(codec_port) > 1) || - (adata->convert_rate || adata->convert_channels)) + asoc_simple_is_convert_required(adata)) return true; return false; diff --git a/sound/soc/generic/simple-card-utils.c b/sound/soc/generic/simple-card-utils.c index bef16833c487..be69bbc47f81 100644 --- a/sound/soc/generic/simple-card-utils.c +++ b/sound/soc/generic/simple-card-utils.c @@ -85,6 +85,21 @@ void asoc_simple_parse_convert(struct device_node *np, } EXPORT_SYMBOL_GPL(asoc_simple_parse_convert); +/** + * asoc_simple_is_convert_required() - Query if HW param conversion was requested + * @data: Link data. + * + * Returns true if any HW param conversion was requested for this DAI link with + * any "convert-xxx" properties. + */ +bool asoc_simple_is_convert_required(const struct asoc_simple_data *data) +{ + return data->convert_rate || + data->convert_channels || + data->convert_sample_format; +} +EXPORT_SYMBOL_GPL(asoc_simple_is_convert_required); + int asoc_simple_parse_daifmt(struct device *dev, struct device_node *node, struct device_node *codec, diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c index 78419e18717d..feb55b66239b 100644 --- a/sound/soc/generic/simple-card.c +++ b/sound/soc/generic/simple-card.c @@ -393,8 +393,7 @@ static int __simple_for_each_link(struct asoc_simple_priv *priv, * or has convert-xxx property */ if (dpcm_selectable && - (num > 2 || - adata.convert_rate || adata.convert_channels)) { + (num > 2 || asoc_simple_is_convert_required(&adata))) { /* * np * |1(CPU)|0(Codec) li->cpu -- 2.38.0

3 2

[PATCH 05/17] ASoC: remove unused ep93xx files
by Arnd Bergmann 19 Oct '22

19 Oct '22

From: Arnd Bergmann <arnd(a)arndb.de> A couple of ep93xx board files were unused and got removed, so the corresponding ASoC support can also be removed. Cc: Mika Westerberg <mika.westerberg(a)iki.fi> Cc: Ryan Mallon <rmallon(a)gmail.com> Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> --- sound/soc/cirrus/Kconfig | 23 -- sound/soc/cirrus/Makefile | 6 - sound/soc/cirrus/ep93xx-ac97.c | 446 --------------------------------- sound/soc/cirrus/simone.c | 86 ------- sound/soc/cirrus/snappercl15.c | 134 ---------- 5 files changed, 695 deletions(-) delete mode 100644 sound/soc/cirrus/ep93xx-ac97.c delete mode 100644 sound/soc/cirrus/simone.c delete mode 100644 sound/soc/cirrus/snappercl15.c diff --git a/sound/soc/cirrus/Kconfig b/sound/soc/cirrus/Kconfig index 8039a8febefa..34870c2d0cba 100644 --- a/sound/soc/cirrus/Kconfig +++ b/sound/soc/cirrus/Kconfig @@ -27,29 +27,6 @@ config SND_EP93XX_SOC_I2S_WATCHDOG endif # if SND_EP93XX_SOC_I2S -config SND_EP93XX_SOC_AC97 - tristate - select AC97_BUS - select SND_SOC_AC97_BUS - -config SND_EP93XX_SOC_SNAPPERCL15 - tristate "SoC Audio support for Bluewater Systems Snapper CL15 module" - depends on SND_EP93XX_SOC && MACH_SNAPPER_CL15 && I2C - select SND_EP93XX_SOC_I2S - select SND_SOC_TLV320AIC23_I2C - help - Say Y or M here if you want to add support for I2S audio on the - Bluewater Systems Snapper CL15 module. - -config SND_EP93XX_SOC_SIMONE - tristate "SoC Audio support for Simplemachines Sim.One board" - depends on SND_EP93XX_SOC && MACH_SIM_ONE - select SND_EP93XX_SOC_AC97 - select SND_SOC_AC97_CODEC - help - Say Y or M here if you want to add support for AC97 audio on the - Simplemachines Sim.One board. - config SND_EP93XX_SOC_EDB93XX tristate "SoC Audio support for Cirrus Logic EDB93xx boards" depends on SND_EP93XX_SOC && (MACH_EDB9301 || MACH_EDB9302 || MACH_EDB9302A || MACH_EDB9307A || MACH_EDB9315A) diff --git a/sound/soc/cirrus/Makefile b/sound/soc/cirrus/Makefile index bfb8dc409f53..19a86daad660 100644 --- a/sound/soc/cirrus/Makefile +++ b/sound/soc/cirrus/Makefile @@ -2,17 +2,11 @@ # EP93xx Platform Support snd-soc-ep93xx-objs := ep93xx-pcm.o snd-soc-ep93xx-i2s-objs := ep93xx-i2s.o -snd-soc-ep93xx-ac97-objs := ep93xx-ac97.o obj-$(CONFIG_SND_EP93XX_SOC) += snd-soc-ep93xx.o obj-$(CONFIG_SND_EP93XX_SOC_I2S) += snd-soc-ep93xx-i2s.o -obj-$(CONFIG_SND_EP93XX_SOC_AC97) += snd-soc-ep93xx-ac97.o # EP93XX Machine Support -snd-soc-snappercl15-objs := snappercl15.o -snd-soc-simone-objs := simone.o snd-soc-edb93xx-objs := edb93xx.o -obj-$(CONFIG_SND_EP93XX_SOC_SNAPPERCL15) += snd-soc-snappercl15.o -obj-$(CONFIG_SND_EP93XX_SOC_SIMONE) += snd-soc-simone.o obj-$(CONFIG_SND_EP93XX_SOC_EDB93XX) += snd-soc-edb93xx.o diff --git a/sound/soc/cirrus/ep93xx-ac97.c b/sound/soc/cirrus/ep93xx-ac97.c deleted file mode 100644 index 37593abe6053..000000000000 --- a/sound/soc/cirrus/ep93xx-ac97.c +++ /dev/null @@ -1,446 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * ASoC driver for Cirrus Logic EP93xx AC97 controller. - * - * Copyright (c) 2010 Mika Westerberg - * - * Based on s3c-ac97 ASoC driver by Jaswinder Singh. - */ - -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/slab.h> - -#include <sound/core.h> -#include <sound/dmaengine_pcm.h> -#include <sound/ac97_codec.h> -#include <sound/soc.h> - -#include <linux/platform_data/dma-ep93xx.h> -#include <linux/soc/cirrus/ep93xx.h> - -#include "ep93xx-pcm.h" - -/* - * Per channel (1-4) registers. - */ -#define AC97CH(n) (((n) - 1) * 0x20) - -#define AC97DR(n) (AC97CH(n) + 0x0000) - -#define AC97RXCR(n) (AC97CH(n) + 0x0004) -#define AC97RXCR_REN BIT(0) -#define AC97RXCR_RX3 BIT(3) -#define AC97RXCR_RX4 BIT(4) -#define AC97RXCR_CM BIT(15) - -#define AC97TXCR(n) (AC97CH(n) + 0x0008) -#define AC97TXCR_TEN BIT(0) -#define AC97TXCR_TX3 BIT(3) -#define AC97TXCR_TX4 BIT(4) -#define AC97TXCR_CM BIT(15) - -#define AC97SR(n) (AC97CH(n) + 0x000c) -#define AC97SR_TXFE BIT(1) -#define AC97SR_TXUE BIT(6) - -#define AC97RISR(n) (AC97CH(n) + 0x0010) -#define AC97ISR(n) (AC97CH(n) + 0x0014) -#define AC97IE(n) (AC97CH(n) + 0x0018) - -/* - * Global AC97 controller registers. - */ -#define AC97S1DATA 0x0080 -#define AC97S2DATA 0x0084 -#define AC97S12DATA 0x0088 - -#define AC97RGIS 0x008c -#define AC97GIS 0x0090 -#define AC97IM 0x0094 -/* - * Common bits for RGIS, GIS and IM registers. - */ -#define AC97_SLOT2RXVALID BIT(1) -#define AC97_CODECREADY BIT(5) -#define AC97_SLOT2TXCOMPLETE BIT(6) - -#define AC97EOI 0x0098 -#define AC97EOI_WINT BIT(0) -#define AC97EOI_CODECREADY BIT(1) - -#define AC97GCR 0x009c -#define AC97GCR_AC97IFE BIT(0) - -#define AC97RESET 0x00a0 -#define AC97RESET_TIMEDRESET BIT(0) - -#define AC97SYNC 0x00a4 -#define AC97SYNC_TIMEDSYNC BIT(0) - -#define AC97_TIMEOUT msecs_to_jiffies(5) - -/** - * struct ep93xx_ac97_info - EP93xx AC97 controller info structure - * @lock: mutex serializing access to the bus (slot 1 & 2 ops) - * @dev: pointer to the platform device dev structure - * @regs: mapped AC97 controller registers - * @done: bus ops wait here for an interrupt - */ -struct ep93xx_ac97_info { - struct mutex lock; - struct device *dev; - void __iomem *regs; - struct completion done; - struct snd_dmaengine_dai_dma_data dma_params_rx; - struct snd_dmaengine_dai_dma_data dma_params_tx; -}; - -/* currently ALSA only supports a single AC97 device */ -static struct ep93xx_ac97_info *ep93xx_ac97_info; - -static struct ep93xx_dma_data ep93xx_ac97_pcm_out = { - .name = "ac97-pcm-out", - .port = EP93XX_DMA_AAC1, - .direction = DMA_MEM_TO_DEV, -}; - -static struct ep93xx_dma_data ep93xx_ac97_pcm_in = { - .name = "ac97-pcm-in", - .port = EP93XX_DMA_AAC1, - .direction = DMA_DEV_TO_MEM, -}; - -static inline unsigned ep93xx_ac97_read_reg(struct ep93xx_ac97_info *info, - unsigned reg) -{ - return __raw_readl(info->regs + reg); -} - -static inline void ep93xx_ac97_write_reg(struct ep93xx_ac97_info *info, - unsigned reg, unsigned val) -{ - __raw_writel(val, info->regs + reg); -} - -static unsigned short ep93xx_ac97_read(struct snd_ac97 *ac97, - unsigned short reg) -{ - struct ep93xx_ac97_info *info = ep93xx_ac97_info; - unsigned short val; - - mutex_lock(&info->lock); - - ep93xx_ac97_write_reg(info, AC97S1DATA, reg); - ep93xx_ac97_write_reg(info, AC97IM, AC97_SLOT2RXVALID); - if (!wait_for_completion_timeout(&info->done, AC97_TIMEOUT)) { - dev_warn(info->dev, "timeout reading register %x\n", reg); - mutex_unlock(&info->lock); - return -ETIMEDOUT; - } - val = (unsigned short)ep93xx_ac97_read_reg(info, AC97S2DATA); - - mutex_unlock(&info->lock); - return val; -} - -static void ep93xx_ac97_write(struct snd_ac97 *ac97, - unsigned short reg, - unsigned short val) -{ - struct ep93xx_ac97_info *info = ep93xx_ac97_info; - - mutex_lock(&info->lock); - - /* - * Writes to the codec need to be done so that slot 2 is filled in - * before slot 1. - */ - ep93xx_ac97_write_reg(info, AC97S2DATA, val); - ep93xx_ac97_write_reg(info, AC97S1DATA, reg); - - ep93xx_ac97_write_reg(info, AC97IM, AC97_SLOT2TXCOMPLETE); - if (!wait_for_completion_timeout(&info->done, AC97_TIMEOUT)) - dev_warn(info->dev, "timeout writing register %x\n", reg); - - mutex_unlock(&info->lock); -} - -static void ep93xx_ac97_warm_reset(struct snd_ac97 *ac97) -{ - struct ep93xx_ac97_info *info = ep93xx_ac97_info; - - mutex_lock(&info->lock); - - /* - * We are assuming that before this functions gets called, the codec - * BIT_CLK is stopped by forcing the codec into powerdown mode. We can - * control the SYNC signal directly via AC97SYNC register. Using - * TIMEDSYNC the controller will keep the SYNC high > 1us. - */ - ep93xx_ac97_write_reg(info, AC97SYNC, AC97SYNC_TIMEDSYNC); - ep93xx_ac97_write_reg(info, AC97IM, AC97_CODECREADY); - if (!wait_for_completion_timeout(&info->done, AC97_TIMEOUT)) - dev_warn(info->dev, "codec warm reset timeout\n"); - - mutex_unlock(&info->lock); -} - -static void ep93xx_ac97_cold_reset(struct snd_ac97 *ac97) -{ - struct ep93xx_ac97_info *info = ep93xx_ac97_info; - - mutex_lock(&info->lock); - - /* - * For doing cold reset, we disable the AC97 controller interface, clear - * WINT and CODECREADY bits, and finally enable the interface again. - */ - ep93xx_ac97_write_reg(info, AC97GCR, 0); - ep93xx_ac97_write_reg(info, AC97EOI, AC97EOI_CODECREADY | AC97EOI_WINT); - ep93xx_ac97_write_reg(info, AC97GCR, AC97GCR_AC97IFE); - - /* - * Now, assert the reset and wait for the codec to become ready. - */ - ep93xx_ac97_write_reg(info, AC97RESET, AC97RESET_TIMEDRESET); - ep93xx_ac97_write_reg(info, AC97IM, AC97_CODECREADY); - if (!wait_for_completion_timeout(&info->done, AC97_TIMEOUT)) - dev_warn(info->dev, "codec cold reset timeout\n"); - - /* - * Give the codec some time to come fully out from the reset. This way - * we ensure that the subsequent reads/writes will work. - */ - usleep_range(15000, 20000); - - mutex_unlock(&info->lock); -} - -static irqreturn_t ep93xx_ac97_interrupt(int irq, void *dev_id) -{ - struct ep93xx_ac97_info *info = dev_id; - unsigned status, mask; - - /* - * Just mask out the interrupt and wake up the waiting thread. - * Interrupts are cleared via reading/writing to slot 1 & 2 registers by - * the waiting thread. - */ - status = ep93xx_ac97_read_reg(info, AC97GIS); - mask = ep93xx_ac97_read_reg(info, AC97IM); - mask &= ~status; - ep93xx_ac97_write_reg(info, AC97IM, mask); - - complete(&info->done); - return IRQ_HANDLED; -} - -static struct snd_ac97_bus_ops ep93xx_ac97_ops = { - .read = ep93xx_ac97_read, - .write = ep93xx_ac97_write, - .reset = ep93xx_ac97_cold_reset, - .warm_reset = ep93xx_ac97_warm_reset, -}; - -static int ep93xx_ac97_trigger(struct snd_pcm_substream *substream, - int cmd, struct snd_soc_dai *dai) -{ - struct ep93xx_ac97_info *info = snd_soc_dai_get_drvdata(dai); - unsigned v = 0; - - switch (cmd) { - case SNDRV_PCM_TRIGGER_START: - case SNDRV_PCM_TRIGGER_RESUME: - case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { - /* - * Enable compact mode, TX slots 3 & 4, and the TX FIFO - * itself. - */ - v |= AC97TXCR_CM; - v |= AC97TXCR_TX3 | AC97TXCR_TX4; - v |= AC97TXCR_TEN; - ep93xx_ac97_write_reg(info, AC97TXCR(1), v); - } else { - /* - * Enable compact mode, RX slots 3 & 4, and the RX FIFO - * itself. - */ - v |= AC97RXCR_CM; - v |= AC97RXCR_RX3 | AC97RXCR_RX4; - v |= AC97RXCR_REN; - ep93xx_ac97_write_reg(info, AC97RXCR(1), v); - } - break; - - case SNDRV_PCM_TRIGGER_STOP: - case SNDRV_PCM_TRIGGER_SUSPEND: - case SNDRV_PCM_TRIGGER_PAUSE_PUSH: - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { - /* - * As per Cirrus EP93xx errata described below: - * - * https://www.cirrus.com/en/pubs/errata/ER667E2B.pdf - * - * we will wait for the TX FIFO to be empty before - * clearing the TEN bit. - */ - unsigned long timeout = jiffies + AC97_TIMEOUT; - - do { - v = ep93xx_ac97_read_reg(info, AC97SR(1)); - if (time_after(jiffies, timeout)) { - dev_warn(info->dev, "TX timeout\n"); - break; - } - } while (!(v & (AC97SR_TXFE | AC97SR_TXUE))); - - /* disable the TX FIFO */ - ep93xx_ac97_write_reg(info, AC97TXCR(1), 0); - } else { - /* disable the RX FIFO */ - ep93xx_ac97_write_reg(info, AC97RXCR(1), 0); - } - break; - - default: - dev_warn(info->dev, "unknown command %d\n", cmd); - return -EINVAL; - } - - return 0; -} - -static int ep93xx_ac97_dai_probe(struct snd_soc_dai *dai) -{ - struct ep93xx_ac97_info *info = snd_soc_dai_get_drvdata(dai); - - info->dma_params_tx.filter_data = &ep93xx_ac97_pcm_out; - info->dma_params_rx.filter_data = &ep93xx_ac97_pcm_in; - - dai->playback_dma_data = &info->dma_params_tx; - dai->capture_dma_data = &info->dma_params_rx; - - return 0; -} - -static const struct snd_soc_dai_ops ep93xx_ac97_dai_ops = { - .trigger = ep93xx_ac97_trigger, -}; - -static struct snd_soc_dai_driver ep93xx_ac97_dai = { - .name = "ep93xx-ac97", - .id = 0, - .probe = ep93xx_ac97_dai_probe, - .playback = { - .stream_name = "AC97 Playback", - .channels_min = 2, - .channels_max = 2, - .rates = SNDRV_PCM_RATE_8000_48000, - .formats = SNDRV_PCM_FMTBIT_S16_LE, - }, - .capture = { - .stream_name = "AC97 Capture", - .channels_min = 2, - .channels_max = 2, - .rates = SNDRV_PCM_RATE_8000_48000, - .formats = SNDRV_PCM_FMTBIT_S16_LE, - }, - .ops = &ep93xx_ac97_dai_ops, -}; - -static const struct snd_soc_component_driver ep93xx_ac97_component = { - .name = "ep93xx-ac97", - .legacy_dai_naming = 1, -}; - -static int ep93xx_ac97_probe(struct platform_device *pdev) -{ - struct ep93xx_ac97_info *info; - int irq; - int ret; - - info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); - if (!info) - return -ENOMEM; - - info->regs = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(info->regs)) - return PTR_ERR(info->regs); - - irq = platform_get_irq(pdev, 0); - if (irq <= 0) - return irq < 0 ? irq : -ENODEV; - - ret = devm_request_irq(&pdev->dev, irq, ep93xx_ac97_interrupt, - IRQF_TRIGGER_HIGH, pdev->name, info); - if (ret) - goto fail; - - dev_set_drvdata(&pdev->dev, info); - - mutex_init(&info->lock); - init_completion(&info->done); - info->dev = &pdev->dev; - - ep93xx_ac97_info = info; - platform_set_drvdata(pdev, info); - - ret = snd_soc_set_ac97_ops(&ep93xx_ac97_ops); - if (ret) - goto fail; - - ret = snd_soc_register_component(&pdev->dev, &ep93xx_ac97_component, - &ep93xx_ac97_dai, 1); - if (ret) - goto fail; - - ret = devm_ep93xx_pcm_platform_register(&pdev->dev); - if (ret) - goto fail_unregister; - - return 0; - -fail_unregister: - snd_soc_unregister_component(&pdev->dev); -fail: - ep93xx_ac97_info = NULL; - snd_soc_set_ac97_ops(NULL); - return ret; -} - -static int ep93xx_ac97_remove(struct platform_device *pdev) -{ - struct ep93xx_ac97_info *info = platform_get_drvdata(pdev); - - snd_soc_unregister_component(&pdev->dev); - - /* disable the AC97 controller */ - ep93xx_ac97_write_reg(info, AC97GCR, 0); - - ep93xx_ac97_info = NULL; - - snd_soc_set_ac97_ops(NULL); - - return 0; -} - -static struct platform_driver ep93xx_ac97_driver = { - .probe = ep93xx_ac97_probe, - .remove = ep93xx_ac97_remove, - .driver = { - .name = "ep93xx-ac97", - }, -}; - -module_platform_driver(ep93xx_ac97_driver); - -MODULE_DESCRIPTION("EP93xx AC97 ASoC Driver"); -MODULE_AUTHOR("Mika Westerberg <mika.westerberg(a)iki.fi>"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:ep93xx-ac97"); diff --git a/sound/soc/cirrus/simone.c b/sound/soc/cirrus/simone.c deleted file mode 100644 index 801c90877d77..000000000000 --- a/sound/soc/cirrus/simone.c +++ /dev/null @@ -1,86 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * simone.c -- ASoC audio for Simplemachines Sim.One board - * - * Copyright (c) 2010 Mika Westerberg - * - * Based on snappercl15 machine driver by Ryan Mallon. - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/soc/cirrus/ep93xx.h> - -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/soc.h> - -#include <asm/mach-types.h> - -SND_SOC_DAILINK_DEFS(hifi, - DAILINK_COMP_ARRAY(COMP_CPU("ep93xx-ac97")), - DAILINK_COMP_ARRAY(COMP_CODEC("ac97-codec", "ac97-hifi")), - DAILINK_COMP_ARRAY(COMP_PLATFORM("ep93xx-ac97"))); - -static struct snd_soc_dai_link simone_dai = { - .name = "AC97", - .stream_name = "AC97 HiFi", - SND_SOC_DAILINK_REG(hifi), -}; - -static struct snd_soc_card snd_soc_simone = { - .name = "Sim.One", - .owner = THIS_MODULE, - .dai_link = &simone_dai, - .num_links = 1, -}; - -static struct platform_device *simone_snd_ac97_device; - -static int simone_probe(struct platform_device *pdev) -{ - struct snd_soc_card *card = &snd_soc_simone; - int ret; - - simone_snd_ac97_device = platform_device_register_simple("ac97-codec", - -1, NULL, 0); - if (IS_ERR(simone_snd_ac97_device)) - return PTR_ERR(simone_snd_ac97_device); - - card->dev = &pdev->dev; - - ret = snd_soc_register_card(card); - if (ret) { - dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", - ret); - platform_device_unregister(simone_snd_ac97_device); - } - - return ret; -} - -static int simone_remove(struct platform_device *pdev) -{ - struct snd_soc_card *card = platform_get_drvdata(pdev); - - snd_soc_unregister_card(card); - platform_device_unregister(simone_snd_ac97_device); - - return 0; -} - -static struct platform_driver simone_driver = { - .driver = { - .name = "simone-audio", - }, - .probe = simone_probe, - .remove = simone_remove, -}; - -module_platform_driver(simone_driver); - -MODULE_DESCRIPTION("ALSA SoC Simplemachines Sim.One"); -MODULE_AUTHOR("Mika Westerberg <mika.westerberg(a)iki.fi>"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:simone-audio"); diff --git a/sound/soc/cirrus/snappercl15.c b/sound/soc/cirrus/snappercl15.c deleted file mode 100644 index a286f5beeaeb..000000000000 --- a/sound/soc/cirrus/snappercl15.c +++ /dev/null @@ -1,134 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * snappercl15.c -- SoC audio for Bluewater Systems Snapper CL15 module - * - * Copyright (C) 2008 Bluewater Systems Ltd - * Author: Ryan Mallon - */ - -#include <linux/platform_device.h> -#include <linux/module.h> -#include <linux/soc/cirrus/ep93xx.h> -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/soc.h> - -#include <asm/mach-types.h> - -#include "../codecs/tlv320aic23.h" - -#define CODEC_CLOCK 5644800 - -static int snappercl15_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); - struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); - struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0); - int err; - - err = snd_soc_dai_set_sysclk(codec_dai, 0, CODEC_CLOCK, - SND_SOC_CLOCK_IN); - if (err) - return err; - - err = snd_soc_dai_set_sysclk(cpu_dai, 0, CODEC_CLOCK, - SND_SOC_CLOCK_OUT); - if (err) - return err; - - return 0; -} - -static const struct snd_soc_ops snappercl15_ops = { - .hw_params = snappercl15_hw_params, -}; - -static const struct snd_soc_dapm_widget tlv320aic23_dapm_widgets[] = { - SND_SOC_DAPM_HP("Headphone Jack", NULL), - SND_SOC_DAPM_LINE("Line In", NULL), - SND_SOC_DAPM_MIC("Mic Jack", NULL), -}; - -static const struct snd_soc_dapm_route audio_map[] = { - {"Headphone Jack", NULL, "LHPOUT"}, - {"Headphone Jack", NULL, "RHPOUT"}, - - {"LLINEIN", NULL, "Line In"}, - {"RLINEIN", NULL, "Line In"}, - - {"MICIN", NULL, "Mic Jack"}, -}; - -SND_SOC_DAILINK_DEFS(aic23, - DAILINK_COMP_ARRAY(COMP_CPU("ep93xx-i2s")), - DAILINK_COMP_ARRAY(COMP_CODEC("tlv320aic23-codec.0-001a", - "tlv320aic23-hifi")), - DAILINK_COMP_ARRAY(COMP_PLATFORM("ep93xx-i2s"))); - -static struct snd_soc_dai_link snappercl15_dai = { - .name = "tlv320aic23", - .stream_name = "AIC23", - .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBC_CFC, - .ops = &snappercl15_ops, - SND_SOC_DAILINK_REG(aic23), -}; - -static struct snd_soc_card snd_soc_snappercl15 = { - .name = "Snapper CL15", - .owner = THIS_MODULE, - .dai_link = &snappercl15_dai, - .num_links = 1, - - .dapm_widgets = tlv320aic23_dapm_widgets, - .num_dapm_widgets = ARRAY_SIZE(tlv320aic23_dapm_widgets), - .dapm_routes = audio_map, - .num_dapm_routes = ARRAY_SIZE(audio_map), -}; - -static int snappercl15_probe(struct platform_device *pdev) -{ - struct snd_soc_card *card = &snd_soc_snappercl15; - int ret; - - ret = ep93xx_i2s_acquire(); - if (ret) - return ret; - - card->dev = &pdev->dev; - - ret = snd_soc_register_card(card); - if (ret) { - dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", - ret); - ep93xx_i2s_release(); - } - - return ret; -} - -static int snappercl15_remove(struct platform_device *pdev) -{ - struct snd_soc_card *card = platform_get_drvdata(pdev); - - snd_soc_unregister_card(card); - ep93xx_i2s_release(); - - return 0; -} - -static struct platform_driver snappercl15_driver = { - .driver = { - .name = "snappercl15-audio", - }, - .probe = snappercl15_probe, - .remove = snappercl15_remove, -}; - -module_platform_driver(snappercl15_driver); - -MODULE_AUTHOR("Ryan Mallon"); -MODULE_DESCRIPTION("ALSA SoC Snapper CL15"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:snappercl15-audio"); -- 2.29.2

2 1

[PATCH 00/17] ARM: remove old board files
by Arnd Bergmann 19 Oct '22

19 Oct '22

From: Arnd Bergmann <arnd(a)arndb.de> This is the first part of the removal of old board files, addressing all the easy cases: cns3xxx and iop32x get removed completely, including a handful of device driversm while ep93xx, dove, mv78xx0, orion, footbridge and omap1 all keep basic platform support but drop support for all boards that have no known users. There are seven patches for other subsystems in this series. It would be helpful to get everything merged in the same release if there are no objections, but I don't care if I include them in the soc tree with an Ack from the subsystem maintainers or the patches are applied directly into the subsystem trees. Arnd Bergmann (17): ARM: at91: remove stale MAINTAINER file entries ARM: cns3xxx: remove entire platform mmc: remove cns3xxx driver ARM: ep93xx: remove old board files ASoC: remove unused ep93xx files ARM: mv78xx0: un-deprecate Terastation WXL ARM: orion: remove unused board files ARM: orion5x: remove dsa_chip_data references ARM: iop32x: remove the platform dmaengine: remove iop-adma driver gpio: remove iop driver ARM: footbridge: remove CATS ARM: omap1: remove unused board files ARM: omap1: remove dead code fbdev: omapfb: remove unused board support spi: remove omap 100K driver mfd: remove htc-i2cpld driver CC: Russell King <linux(a)armlinux.org.uk> CC: Aaro Koskinen <aaro.koskinen(a)iki.fi> CC: Janusz Krzysztofik <jmkrzyszt(a)gmail.com> CC: Tony Lindgren <tony(a)atomide.com> CC: Andrew Lunn <andrew(a)lunn.ch> CC: Sebastian Hesselbarth <sebastian.hesselbarth(a)gmail.com> CC: Gregory Clement <gregory.clement(a)bootlin.com> CC: Hartley Sweeten <hsweeten(a)visionengravers.com> CC: Alexander Sverdlin <alexander.sverdlin(a)gmail.com> CC: Paul Walmsley <paul(a)pwsan.com> CC: Kevin Hilman <khilman(a)kernel.org> CC: Vinod Koul <vkoul(a)kernel.org> CC: Linus Walleij <linus.walleij(a)linaro.org> CC: Bartosz Golaszewski <brgl(a)bgdev.pl> CC: Lee Jones <lee(a)kernel.org> CC: Ulf Hansson <ulf.hansson(a)linaro.org> CC: Mark Brown <broonie(a)kernel.org> CC: Felipe Balbi <balbi(a)kernel.org> CC: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> CC: Alan Stern <stern(a)rowland.harvard.edu> CC: Bin Liu <b-liu(a)ti.com> CC: Helge Deller <deller(a)gmx.de> CC: Wim Van Sebroeck <wim(a)linux-watchdog.org> CC: Guenter Roeck <linux(a)roeck-us.net> CC: Liam Girdwood <lgirdwood(a)gmail.com> CC: Jaroslav Kysela <perex(a)perex.cz> CC: Takashi Iwai <tiwai(a)suse.com> Cc: Hubert Feurstein <hubert.feurstein(a)contec.at> Cc: Krzysztof Halasa <khalasa(a)piap.pl> Cc: Lennert Buytenhek <kernel(a)wantstofly.org> Cc: Sergey Lapin <slapin(a)ossfans.org> CC: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> CC: Dan Williams <dan.j.williams(a)intel.com> CC: "Pali Rohár" <pali(a)kernel.org> CC: linux-kernel(a)vger.kernel.org CC: linux-arm-kernel(a)lists.infradead.org CC: linux-omap(a)vger.kernel.org CC: linux-usb(a)vger.kernel.org CC: dmaengine(a)vger.kernel.org CC: linux-gpio(a)vger.kernel.org CC: linux-i2c(a)vger.kernel.org CC: linux-mmc(a)vger.kernel.org CC: linux-spi(a)vger.kernel.org CC: linux-fbdev(a)vger.kernel.org CC: dri-devel(a)lists.freedesktop.org CC: linux-watchdog(a)vger.kernel.org CC: alsa-devel(a)alsa-project.org MAINTAINERS | 57 - arch/arm/Kconfig | 6 +- arch/arm/Kconfig.debug | 52 +- arch/arm/Makefile | 2 - arch/arm/boot/compressed/misc-ep93xx.h | 13 +- arch/arm/configs/cns3420vb_defconfig | 63 - arch/arm/configs/iop32x_defconfig | 126 -- arch/arm/configs/mv78xx0_defconfig | 3 - arch/arm/configs/omap1_defconfig | 2 - arch/arm/kernel/entry-common.S | 15 - arch/arm/kernel/head.S | 2 +- arch/arm/mach-cns3xxx/Kconfig | 21 - arch/arm/mach-cns3xxx/Makefile | 6 - arch/arm/mach-cns3xxx/cns3420vb.c | 252 --- arch/arm/mach-cns3xxx/cns3xxx.h | 593 ------- arch/arm/mach-cns3xxx/core.c | 410 ----- arch/arm/mach-cns3xxx/core.h | 32 - arch/arm/mach-cns3xxx/devices.c | 108 -- arch/arm/mach-cns3xxx/devices.h | 17 - arch/arm/mach-cns3xxx/pcie.c | 290 ---- arch/arm/mach-cns3xxx/pm.c | 120 -- arch/arm/mach-cns3xxx/pm.h | 20 - arch/arm/mach-dove/Kconfig | 8 - arch/arm/mach-dove/Makefile | 1 - arch/arm/mach-dove/dove-db-setup.c | 101 -- arch/arm/mach-ep93xx/Kconfig | 63 - arch/arm/mach-ep93xx/Makefile | 5 - arch/arm/mach-ep93xx/adssphere.c | 41 - arch/arm/mach-ep93xx/gesbc9312.c | 41 - arch/arm/mach-ep93xx/micro9.c | 125 -- arch/arm/mach-ep93xx/simone.c | 128 -- arch/arm/mach-ep93xx/snappercl15.c | 162 -- arch/arm/mach-footbridge/Kconfig | 12 - arch/arm/mach-footbridge/Makefile | 2 - arch/arm/mach-footbridge/cats-hw.c | 98 -- arch/arm/mach-footbridge/cats-pci.c | 64 - arch/arm/mach-footbridge/common.c | 3 - arch/arm/mach-iop32x/Kconfig | 54 - arch/arm/mach-iop32x/Makefile | 20 - arch/arm/mach-iop32x/adma.c | 163 -- arch/arm/mach-iop32x/cp6.c | 48 - arch/arm/mach-iop32x/em7210.c | 232 --- arch/arm/mach-iop32x/glantank.c | 214 --- arch/arm/mach-iop32x/glantank.h | 12 - arch/arm/mach-iop32x/gpio-iop32x.h | 11 - arch/arm/mach-iop32x/hardware.h | 38 - arch/arm/mach-iop32x/i2c.c | 92 -- arch/arm/mach-iop32x/iop3xx.h | 326 ---- arch/arm/mach-iop32x/iq31244.c | 333 ---- arch/arm/mach-iop32x/iq31244.h | 16 - arch/arm/mach-iop32x/iq80321.c | 192 --- arch/arm/mach-iop32x/iq80321.h | 16 - arch/arm/mach-iop32x/irq.c | 95 -- arch/arm/mach-iop32x/irqs.h | 48 - arch/arm/mach-iop32x/n2100.c | 367 ----- arch/arm/mach-iop32x/n2100.h | 18 - arch/arm/mach-iop32x/pci.c | 404 ----- arch/arm/mach-iop32x/pmu.c | 29 - arch/arm/mach-iop32x/restart.c | 17 - arch/arm/mach-iop32x/setup.c | 31 - arch/arm/mach-iop32x/time.c | 179 -- arch/arm/mach-mv78xx0/Kconfig | 14 +- arch/arm/mach-mv78xx0/Makefile | 2 - arch/arm/mach-mv78xx0/db78x00-bp-setup.c | 101 -- arch/arm/mach-mv78xx0/rd78x00-masa-setup.c | 86 - arch/arm/mach-omap1/Kconfig | 93 +- arch/arm/mach-omap1/Makefile | 18 - arch/arm/mach-omap1/board-fsample.c | 366 ----- arch/arm/mach-omap1/board-generic.c | 85 - arch/arm/mach-omap1/board-h2-mmc.c | 74 - arch/arm/mach-omap1/board-h2.c | 448 ----- arch/arm/mach-omap1/board-h2.h | 38 - arch/arm/mach-omap1/board-h3-mmc.c | 64 - arch/arm/mach-omap1/board-h3.c | 455 ----- arch/arm/mach-omap1/board-h3.h | 35 - arch/arm/mach-omap1/board-htcherald.c | 585 ------- arch/arm/mach-omap1/board-innovator.c | 481 ------ arch/arm/mach-omap1/board-nand.c | 33 - arch/arm/mach-omap1/board-palmtt.c | 285 ---- arch/arm/mach-omap1/board-palmz71.c | 300 ---- arch/arm/mach-omap1/board-perseus2.c | 333 ---- arch/arm/mach-omap1/clock_data.c | 17 +- arch/arm/mach-omap1/common.h | 8 - arch/arm/mach-omap1/devices.c | 58 +- arch/arm/mach-omap1/dma.c | 25 +- arch/arm/mach-omap1/fpga.c | 186 --- arch/arm/mach-omap1/fpga.h | 49 - arch/arm/mach-omap1/gpio7xx.c | 272 --- arch/arm/mach-omap1/i2c.c | 14 +- arch/arm/mach-omap1/io.c | 24 - arch/arm/mach-omap1/irq.c | 20 +- arch/arm/mach-omap1/irqs.h | 9 - arch/arm/mach-omap1/mcbsp.c | 83 - arch/arm/mach-omap1/mtd-xip.h | 4 - arch/arm/mach-omap1/mux.c | 52 - arch/arm/mach-omap1/pm.c | 76 +- arch/arm/mach-omap1/pm.h | 39 +- arch/arm/mach-omap1/serial.c | 15 - arch/arm/mach-omap1/sleep.S | 80 - arch/arm/mach-omap1/sram-init.c | 7 +- arch/arm/mach-omap1/usb.c | 34 +- arch/arm/mach-orion5x/Kconfig | 59 - arch/arm/mach-orion5x/Makefile | 8 - arch/arm/mach-orion5x/common.c | 10 - arch/arm/mach-orion5x/common.h | 2 - arch/arm/mach-orion5x/db88f5281-setup.c | 376 ----- arch/arm/mach-orion5x/ls_hgl-setup.c | 275 ---- arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c | 172 -- arch/arm/mach-orion5x/rd88f5181l-ge-setup.c | 183 --- arch/arm/mach-orion5x/rd88f5182-setup.c | 288 ---- arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c | 120 -- arch/arm/mach-orion5x/wnr854t-setup.c | 175 -- arch/arm/mach-orion5x/wrt350n-v2-setup.c | 263 --- arch/arm/plat-orion/common.c | 31 - arch/arm/plat-orion/include/plat/common.h | 3 - drivers/dma/Kconfig | 8 - drivers/dma/Makefile | 1 - drivers/dma/iop-adma.c | 1554 ------------------ drivers/dma/iop-adma.h | 914 ---------- drivers/gpio/Kconfig | 10 - drivers/gpio/Makefile | 1 - drivers/gpio/gpio-iop.c | 59 - drivers/i2c/busses/Kconfig | 8 +- drivers/mfd/Kconfig | 11 +- drivers/mfd/Makefile | 1 - drivers/mfd/htc-i2cpld.c | 627 ------- drivers/mmc/host/Kconfig | 13 +- drivers/mmc/host/Makefile | 1 - drivers/mmc/host/sdhci-cns3xxx.c | 113 -- drivers/spi/Kconfig | 6 - drivers/spi/Makefile | 1 - drivers/spi/spi-omap-100k.c | 490 ------ drivers/spi/spi-omap-uwire.c | 16 +- drivers/usb/gadget/udc/Kconfig | 2 +- drivers/usb/gadget/udc/omap_udc.c | 24 +- drivers/usb/host/Kconfig | 25 +- drivers/usb/host/ohci-omap.c | 6 +- drivers/usb/musb/musb_dma.h | 11 +- drivers/usb/phy/phy-isp1301-omap.c | 91 +- drivers/video/fbdev/omap/Kconfig | 9 - drivers/video/fbdev/omap/Makefile | 6 - drivers/video/fbdev/omap/lcd_h3.c | 82 - drivers/video/fbdev/omap/lcd_htcherald.c | 59 - drivers/video/fbdev/omap/lcd_inn1510.c | 69 - drivers/video/fbdev/omap/lcd_inn1610.c | 99 -- drivers/video/fbdev/omap/lcd_palmtt.c | 65 - drivers/video/fbdev/omap/lcd_palmz71.c | 59 - drivers/video/fbdev/omap/lcdc.c | 2 - drivers/watchdog/wdt285.c | 2 - include/linux/htcpld.h | 23 - include/linux/platform_data/leds-omap.h | 19 - include/linux/soc/ti/omap1-soc.h | 35 - sound/soc/cirrus/Kconfig | 23 - sound/soc/cirrus/Makefile | 6 - sound/soc/cirrus/ep93xx-ac97.c | 446 ----- sound/soc/cirrus/simone.c | 86 - sound/soc/cirrus/snappercl15.c | 134 -- 157 files changed, 60 insertions(+), 18109 deletions(-) delete mode 100644 arch/arm/configs/cns3420vb_defconfig delete mode 100644 arch/arm/configs/iop32x_defconfig delete mode 100644 arch/arm/mach-cns3xxx/Kconfig delete mode 100644 arch/arm/mach-cns3xxx/Makefile delete mode 100644 arch/arm/mach-cns3xxx/cns3420vb.c delete mode 100644 arch/arm/mach-cns3xxx/cns3xxx.h delete mode 100644 arch/arm/mach-cns3xxx/core.c delete mode 100644 arch/arm/mach-cns3xxx/core.h delete mode 100644 arch/arm/mach-cns3xxx/devices.c delete mode 100644 arch/arm/mach-cns3xxx/devices.h delete mode 100644 arch/arm/mach-cns3xxx/pcie.c delete mode 100644 arch/arm/mach-cns3xxx/pm.c delete mode 100644 arch/arm/mach-cns3xxx/pm.h delete mode 100644 arch/arm/mach-dove/dove-db-setup.c delete mode 100644 arch/arm/mach-ep93xx/adssphere.c delete mode 100644 arch/arm/mach-ep93xx/gesbc9312.c delete mode 100644 arch/arm/mach-ep93xx/micro9.c delete mode 100644 arch/arm/mach-ep93xx/simone.c delete mode 100644 arch/arm/mach-ep93xx/snappercl15.c delete mode 100644 arch/arm/mach-footbridge/cats-hw.c delete mode 100644 arch/arm/mach-footbridge/cats-pci.c delete mode 100644 arch/arm/mach-iop32x/Kconfig delete mode 100644 arch/arm/mach-iop32x/Makefile delete mode 100644 arch/arm/mach-iop32x/adma.c delete mode 100644 arch/arm/mach-iop32x/cp6.c delete mode 100644 arch/arm/mach-iop32x/em7210.c delete mode 100644 arch/arm/mach-iop32x/glantank.c delete mode 100644 arch/arm/mach-iop32x/glantank.h delete mode 100644 arch/arm/mach-iop32x/gpio-iop32x.h delete mode 100644 arch/arm/mach-iop32x/hardware.h delete mode 100644 arch/arm/mach-iop32x/i2c.c delete mode 100644 arch/arm/mach-iop32x/iop3xx.h delete mode 100644 arch/arm/mach-iop32x/iq31244.c delete mode 100644 arch/arm/mach-iop32x/iq31244.h delete mode 100644 arch/arm/mach-iop32x/iq80321.c delete mode 100644 arch/arm/mach-iop32x/iq80321.h delete mode 100644 arch/arm/mach-iop32x/irq.c delete mode 100644 arch/arm/mach-iop32x/irqs.h delete mode 100644 arch/arm/mach-iop32x/n2100.c delete mode 100644 arch/arm/mach-iop32x/n2100.h delete mode 100644 arch/arm/mach-iop32x/pci.c delete mode 100644 arch/arm/mach-iop32x/pmu.c delete mode 100644 arch/arm/mach-iop32x/restart.c delete mode 100644 arch/arm/mach-iop32x/setup.c delete mode 100644 arch/arm/mach-iop32x/time.c delete mode 100644 arch/arm/mach-mv78xx0/db78x00-bp-setup.c delete mode 100644 arch/arm/mach-mv78xx0/rd78x00-masa-setup.c delete mode 100644 arch/arm/mach-omap1/board-fsample.c delete mode 100644 arch/arm/mach-omap1/board-generic.c delete mode 100644 arch/arm/mach-omap1/board-h2-mmc.c delete mode 100644 arch/arm/mach-omap1/board-h2.c delete mode 100644 arch/arm/mach-omap1/board-h2.h delete mode 100644 arch/arm/mach-omap1/board-h3-mmc.c delete mode 100644 arch/arm/mach-omap1/board-h3.c delete mode 100644 arch/arm/mach-omap1/board-h3.h delete mode 100644 arch/arm/mach-omap1/board-htcherald.c delete mode 100644 arch/arm/mach-omap1/board-innovator.c delete mode 100644 arch/arm/mach-omap1/board-nand.c delete mode 100644 arch/arm/mach-omap1/board-palmtt.c delete mode 100644 arch/arm/mach-omap1/board-palmz71.c delete mode 100644 arch/arm/mach-omap1/board-perseus2.c delete mode 100644 arch/arm/mach-omap1/fpga.c delete mode 100644 arch/arm/mach-omap1/fpga.h delete mode 100644 arch/arm/mach-omap1/gpio7xx.c delete mode 100644 arch/arm/mach-orion5x/db88f5281-setup.c delete mode 100644 arch/arm/mach-orion5x/ls_hgl-setup.c delete mode 100644 arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c delete mode 100644 arch/arm/mach-orion5x/rd88f5181l-ge-setup.c delete mode 100644 arch/arm/mach-orion5x/rd88f5182-setup.c delete mode 100644 arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c delete mode 100644 arch/arm/mach-orion5x/wnr854t-setup.c delete mode 100644 arch/arm/mach-orion5x/wrt350n-v2-setup.c delete mode 100644 drivers/dma/iop-adma.c delete mode 100644 drivers/dma/iop-adma.h delete mode 100644 drivers/gpio/gpio-iop.c delete mode 100644 drivers/mfd/htc-i2cpld.c delete mode 100644 drivers/mmc/host/sdhci-cns3xxx.c delete mode 100644 drivers/spi/spi-omap-100k.c delete mode 100644 drivers/video/fbdev/omap/lcd_h3.c delete mode 100644 drivers/video/fbdev/omap/lcd_htcherald.c delete mode 100644 drivers/video/fbdev/omap/lcd_inn1510.c delete mode 100644 drivers/video/fbdev/omap/lcd_inn1610.c delete mode 100644 drivers/video/fbdev/omap/lcd_palmtt.c delete mode 100644 drivers/video/fbdev/omap/lcd_palmz71.c delete mode 100644 include/linux/htcpld.h delete mode 100644 include/linux/platform_data/leds-omap.h delete mode 100644 sound/soc/cirrus/ep93xx-ac97.c delete mode 100644 sound/soc/cirrus/simone.c delete mode 100644 sound/soc/cirrus/snappercl15.c -- 2.29.2

1 0

[PATCH v2 00/11] ASoC: soc-dapm.c random cleanups
by Kuninori Morimoto 19 Oct '22

19 Oct '22

Hi Mark These are v2 of random cleanup for soc-dpam.c/h. Basically, these are just cleanup, nothing changed. v1 https://lore.kernel.org/r/8735bmqazf.wl-kuninori.morimoto.gx@renesas.com v1 -> v2 - add "break;" on default Kuninori Morimoto (11): ASoC: soc-dapm.c: replace snd_soc_dapm_wcache to snd_soc_dapm_widget ASoC: soc-dapm.c: tidyup error handling on snd_soc_dapm_add_route() ASoC: soc-dapm.c: remove no meaning variable from snd_soc_dapm_add_path() ASoC: soc-dapm.c: ignore parameter NULL at snd_soc_dapm_free_widget() ASoC: soc-dapm.c: cleanup dapm_widget_set_power() ASoC: soc-dapm.c: merge dapm_power_one_widget() and dapm_widget_set_power() ASoC: soc-dapm.c: cleanup snd_soc_dapm_new_dai() ASoC: soc-dapm.c: numerical order for dapm_up_seq ASoC: soc-dapm.h: cleanup white space ASoC: soc-dapm.h: fixup comment for snd_soc_dapm_widget_for_each_path() ASoC: soc-dpcm.h: remove snd_soc_dpcm::hw_param include/sound/soc-dapm.h | 188 +++++++++++++++---------------------- include/sound/soc-dpcm.h | 2 - sound/soc/codecs/hda.c | 6 +- sound/soc/intel/avs/pcm.c | 6 +- sound/soc/sh/rcar/core.c | 3 +- sound/soc/soc-dapm.c | 190 ++++++++++++++++---------------------- sound/soc/soc-pcm.c | 12 ++- 7 files changed, 171 insertions(+), 236 deletions(-) -- 2.25.1

3 13

[PATCH 00/11] ASoC: soc-dapm.c random cleanups
by Kuninori Morimoto 19 Oct '22

19 Oct '22

Hi Mark These are random cleanup for soc-dpam.c/h. Basically, these are just cleanup, nothing changed. Kuninori Morimoto (11): ASoC: soc-dapm.c: replace snd_soc_dapm_wcache to snd_soc_dapm_widget ASoC: soc-dapm.c: tidyup error handling on snd_soc_dapm_add_route() ASoC: soc-dapm.c: remove no meaning variable from snd_soc_dapm_add_path() ASoC: soc-dapm.c: ignore parameter NULL at snd_soc_dapm_free_widget() ASoC: soc-dapm.c: cleanup dapm_widget_set_power() ASoC: soc-dapm.c: merge dapm_power_one_widget() and dapm_widget_set_power() ASoC: soc-dapm.c: cleanup snd_soc_dapm_new_dai() ASoC: soc-dapm.c: numerical order for dapm_up_seq ASoC: soc-dapm.h: cleanup white space ASoC: soc-dapm.h: fixup comment for snd_soc_dapm_widget_for_each_path() ASoC: soc-dpcm.h: remove snd_soc_dpcm::hw_param include/sound/soc-dapm.h | 188 +++++++++++++++---------------------- include/sound/soc-dpcm.h | 2 - sound/soc/codecs/hda.c | 6 +- sound/soc/intel/avs/pcm.c | 6 +- sound/soc/sh/rcar/core.c | 3 +- sound/soc/soc-dapm.c | 189 ++++++++++++++++---------------------- sound/soc/soc-pcm.c | 12 ++- 7 files changed, 170 insertions(+), 236 deletions(-) -- 2.25.1 Thank you for your help !! Best regards --- Kuninori Morimoto

3 15

[PATCH 0/4] ASoC: SOF: Intel: Harden the IPC4 low level sequencing
by Peter Ujfalusi 19 Oct '22

19 Oct '22

Hi, The IPC4 use of doorbell registers leaves some corner cases not well defined and the 'correct sequences' are subjective in a sense. The DSP doorbell registers are used as separate and independent channels and the sequences for host -> DSP -> host (reply) can be racy. For example: The ACKing of a received message can happen before the firmware sends the reply or it can as well happen after the reply has been sent and received by the host. Both can be considered 'correct sequences' but they need different handling. This series will allow the kernel to service any interpretation of the sequencing on the firmware side. Regards, Peter --- Peter Ujfalusi (4): ASoC: SOF: ipc4: Log the tx message before sending it ASoC: SOF: Intel: ipc4: Read the interrupt reason registers at the same time ASoC: SOF: Intel: ipc4: Wait for channel to be free before sending a message ASoC: SOF: Intel: ipc4: Ack a received reply or notification separately sound/soc/sof/intel/cnl.c | 26 ++++++++++++++++++++++---- sound/soc/sof/intel/hda-ipc.c | 27 +++++++++++++++++++++++---- sound/soc/sof/intel/hda.c | 11 +++++++++++ sound/soc/sof/intel/hda.h | 9 +++++++++ sound/soc/sof/intel/mtl.c | 24 +++++++++++++++++++++--- sound/soc/sof/ipc4.c | 4 ++-- 6 files changed, 88 insertions(+), 13 deletions(-) -- 2.38.0

2 5

[PATCH -next] ASoC: soc-component: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
by Zhang Qilong 19 Oct '22

19 Oct '22

Using the newest pm_runtime_resume_and_get is more appropriate for simplifing code here. Signed-off-by: Zhang Qilong <zhangqilong3(a)huawei.com> --- sound/soc/soc-component.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/sound/soc/soc-component.c b/sound/soc/soc-component.c index e12f8244242b..659b9ade4158 100644 --- a/sound/soc/soc-component.c +++ b/sound/soc/soc-component.c @@ -1213,11 +1213,9 @@ int snd_soc_pcm_component_pm_runtime_get(struct snd_soc_pcm_runtime *rtd, int i; for_each_rtd_components(rtd, i, component) { - int ret = pm_runtime_get_sync(component->dev); - if (ret < 0 && ret != -EACCES) { - pm_runtime_put_noidle(component->dev); + int ret = pm_runtime_resume_and_get(component->dev); + if (ret < 0 && ret != -EACCES) return soc_component_ret(component, ret); - } /* mark stream if succeeded */ soc_component_mark_push(component, stream, pm); } -- 2.25.1

4 4