February 2021 - Alsa-devel - mailman.alsa-project.org

[PATCH v2 0/9] Tegra186 and Tegra194 audio graph card
by Sameer Pujar 10 Feb '21

10 Feb '21

This series adds support for audio graph based solution on Tegra186 and Tegra194. This enables audio paths for I2S, DMIC and DSPK modules. Depending on the platform Jetson TX2 or Jetson AGX Xavier, required I/O module instances are enabled. Since the latter board has on board audio codec, DT support for the same is enabled and external audio playback and capture can be used. Changelog ========= v1 --> v2: ---------- - Dropped patch "ASoC: tegra: Select SND_SOC_RT5659" as per suggestion from Mark. - Add new patch "ASoC: rt5659: Add Kconfig prompt" - Add new patch "arm64: defconfig: Enable RT5659" - No changes in other patches from earlier series. Sameer Pujar (9): ASoC: dt-bindings: rt5659: Update binding doc ASoC: dt-bindings: tegra: Add iommus property to Tegra graph card ASoC: audio-graph-card: Add clocks property to endpoint node ASoC: rt5659: Add Kconfig prompt arm64: defconfig: Enable RT5659 arm64: tegra: Add RT5658 device entry Revert "arm64: tegra: Disable the ACONNECT for Jetson TX2" arm64: tegra: Audio graph sound card for Jetson TX2 arm64: tegra: Audio graph sound card for Jetson AGX Xavier .../bindings/sound/audio-graph-port.yaml | 3 + .../sound/nvidia,tegra-audio-graph-card.yaml | 3 + Documentation/devicetree/bindings/sound/rt5659.txt | 11 + arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 609 +++++++++++++++++++++ arch/arm64/boot/dts/nvidia/tegra186.dtsi | 22 + arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts | 468 ++++++++++++++++ arch/arm64/boot/dts/nvidia/tegra194.dtsi | 20 + arch/arm64/configs/defconfig | 1 + sound/soc/codecs/Kconfig | 2 +- 9 files changed, 1138 insertions(+), 1 deletion(-) -- 2.7.4

5 17

[PATCH v2 0/7] ASoC: codecs: add support for LPASS Codec TX and RX macros
by Srinivas Kandagatla 10 Feb '21

10 Feb '21

Thanks for reviewing v1, here is v2 patchset addressing comments from v1. This patchset adds support for two Codec Macro blocks(TX and RX) available in Qualcomm LPASS (Low Power Audio SubSystem). There are WSA, VA, TX and RX Macros on LPASS IP, each of the Macro block has specific connectivity like WSA Macros are intended to connect to WSA Smart speaker codecs via SoundWire. VA Macro is intended for DMICs, and TX/RX for Analog codecs via SoundWire like other WCD938x Codecs to provide headphone/ear/lineout/amic/dmic etc .. Most of the work is derived from downstream Qualcomm kernels. Credits to various Qualcomm authors from Patrick Lai's team who have contributed to this code. This patchset has been tested on support to SM8250 MTP Development Board. This board has 2 WSA881X smart speakers with onboard DMIC connected to internal LPASS codec via WSA and VA macros respectively and WCD938x TX and RX connected via Soundwire via TX and RX Macros reseptively. Thanks, srini Changes since v1 - make copyright header line with C++ one - correct usage of regcache! - moved ON/OFF enums to proper switch controls - Align all the control naming! - inline swrm_clock function. Srinivas Kandagatla (7): ASoC: qcom: dt-bindings: add bindings for lpass rx macro codec ASoC: codec: lpass-rx-macro: add support for lpass rx macro ASoC: codec: lpass-rx-macro: add dapm widgets and route ASoC: codec: lpass-rx-macro: add iir widgets ASoC: qcom: dt-bindings: add bindings for lpass tx macro codec ASoC: codec: lpass-tx-macro: add support for lpass tx macro ASoC: codec: lpass-tx-macro: add dapm widgets and route .../bindings/sound/qcom,lpass-rx-macro.yaml | 62 + .../bindings/sound/qcom,lpass-tx-macro.yaml | 67 + sound/soc/codecs/Kconfig | 10 + sound/soc/codecs/Makefile | 4 + sound/soc/codecs/lpass-rx-macro.c | 3604 +++++++++++++++++ sound/soc/codecs/lpass-tx-macro.c | 1877 +++++++++ 6 files changed, 5624 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml create mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml create mode 100644 sound/soc/codecs/lpass-rx-macro.c create mode 100644 sound/soc/codecs/lpass-tx-macro.c -- 2.21.0

3 11

[PATCH v3 0/9] ALSA: add virtio sound driver
by Anton Yakovlev 09 Feb '21

09 Feb '21

This series implements a driver part of the virtio sound device specification v8 [1]. The driver supports PCM playback and capture substreams, jack and channel map controls. A message-based transport is used to write/read PCM frames to/from a device. As a device part was used OpenSynergy proprietary implementation. Any comments are very welcome. v3 changes: - Fixed license headers for all files. - Many coding style and kernel doc fixes. - Replaced devm_kmalloc/devm_kfree with kmalloc/kfree wherever appropriate. - Made the names of the card and PCM devices more informative. - To process the DEVICE_NEEDS_RESET status, simply call device_reprobe(). - For control messages replaced atomic_t by refcount_t for the reference counter and simplified the general logic. - Use vmalloc'ed managed buffer for PCM substreams. - Replaced all atomic fields in the virtio substream structure with non-atomic + spinlock. - Use the non-atomic PCM ops. - Use ops->sync_stop() to release the substream on the device side. - Rebased and tested on top of v5.11-rc6. v2 changes: - For some reason, in the previous patch series, several patches were squashed. Fixed this issue to make the review easier. - Added mst(a)redhat.com to the MAINTAINERS. - When creating virtqueues, now only the event virtqueue is disabled. It's enabled only after successful initialization of the device. - Added additional comments to the reset worker function: [2/9] virtio_card.c:virtsnd_reset_fn() - Added check that VIRTIO_F_VERSION_1 feature bit is set. - Added additional comments to the device removing function: [2/9] virtio_card.c:virtsnd_remove() - Added additional comments to the tx/rx interrupt handler: [5/9] virtio_pcm_msg.c:virtsnd_pcm_msg_complete() - Added additional comments to substream release wait function. [6/9] virtio_pcm_ops.c:virtsnd_pcm_released() [1] https://lists.oasis-open.org/archives/virtio-dev/202003/msg00185.html Anton Yakovlev (9): uapi: virtio_ids: add a sound device type ID from OASIS spec ALSA: virtio: add virtio sound driver ALSA: virtio: handling control messages ALSA: virtio: build PCM devices and substream hardware descriptors ALSA: virtio: handling control and I/O messages for the PCM device ALSA: virtio: PCM substream operators ALSA: virtio: introduce jack support ALSA: virtio: introduce PCM channel map support ALSA: virtio: introduce device suspend/resume support MAINTAINERS | 9 + include/uapi/linux/virtio_ids.h | 1 + include/uapi/linux/virtio_snd.h | 334 +++++++++++++++++++++ sound/Kconfig | 2 + sound/Makefile | 3 +- sound/virtio/Kconfig | 10 + sound/virtio/Makefile | 13 + sound/virtio/virtio_card.c | 462 +++++++++++++++++++++++++++++ sound/virtio/virtio_card.h | 113 ++++++++ sound/virtio/virtio_chmap.c | 219 ++++++++++++++ sound/virtio/virtio_ctl_msg.c | 311 ++++++++++++++++++++ sound/virtio/virtio_ctl_msg.h | 78 +++++ sound/virtio/virtio_jack.c | 233 +++++++++++++++ sound/virtio/virtio_pcm.c | 499 ++++++++++++++++++++++++++++++++ sound/virtio/virtio_pcm.h | 121 ++++++++ sound/virtio/virtio_pcm_msg.c | 393 +++++++++++++++++++++++++ sound/virtio/virtio_pcm_ops.c | 493 +++++++++++++++++++++++++++++++ 17 files changed, 3293 insertions(+), 1 deletion(-) create mode 100644 include/uapi/linux/virtio_snd.h create mode 100644 sound/virtio/Kconfig create mode 100644 sound/virtio/Makefile create mode 100644 sound/virtio/virtio_card.c create mode 100644 sound/virtio/virtio_card.h create mode 100644 sound/virtio/virtio_chmap.c create mode 100644 sound/virtio/virtio_ctl_msg.c create mode 100644 sound/virtio/virtio_ctl_msg.h create mode 100644 sound/virtio/virtio_jack.c create mode 100644 sound/virtio/virtio_pcm.c create mode 100644 sound/virtio/virtio_pcm.h create mode 100644 sound/virtio/virtio_pcm_msg.c create mode 100644 sound/virtio/virtio_pcm_ops.c -- 2.30.0

1 9

[PATCH v3 0/7] ASoC: codecs: add support for LPASS Codec TX and RX macros
by Srinivas Kandagatla 09 Feb '21

09 Feb '21

Thanks for reviewing v2, here is v3 patchset addressing comments from v2. This patchset adds support for two Codec Macro blocks(TX and RX) available in Qualcomm LPASS (Low Power Audio SubSystem). There are WSA, VA, TX and RX Macros on LPASS IP, each of the Macro block has specific connectivity like WSA Macros are intended to connect to WSA Smart speaker codecs via SoundWire. VA Macro is intended for DMICs, and TX/RX for Analog codecs via SoundWire like other WCD938x Codecs to provide headphone/ear/lineout/amic/dmic etc .. Most of the work is derived from downstream Qualcomm kernels. Credits to various Qualcomm authors from Patrick Lai's team who have contributed to this code. This patchset has been tested on support to SM8250 MTP Development Board. This board has 2 WSA881X smart speakers with onboard DMIC connected to internal LPASS codec via WSA and VA macros respectively and WCD938x TX and RX connected via Soundwire via TX and RX Macros reseptively. Thanks, srini Changes since v2: - Suffix some of the simple on/off control names with "Switch" Srinivas Kandagatla (7): ASoC: qcom: dt-bindings: add bindings for lpass rx macro codec ASoC: codecs: lpass-rx-macro: add support for lpass rx macro ASoC: codecs: lpass-rx-macro: add dapm widgets and route ASoC: codecs: lpass-rx-macro: add iir widgets ASoC: qcom: dt-bindings: add bindings for lpass tx macro codec ASoC: codecs: lpass-tx-macro: add support for lpass tx macro ASoC: codecs: lpass-tx-macro: add dapm widgets and route .../bindings/sound/qcom,lpass-rx-macro.yaml | 62 + .../bindings/sound/qcom,lpass-tx-macro.yaml | 67 + sound/soc/codecs/Kconfig | 10 + sound/soc/codecs/Makefile | 4 + sound/soc/codecs/lpass-rx-macro.c | 3604 +++++++++++++++++ sound/soc/codecs/lpass-tx-macro.c | 1877 +++++++++ 6 files changed, 5624 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml create mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml create mode 100644 sound/soc/codecs/lpass-rx-macro.c create mode 100644 sound/soc/codecs/lpass-tx-macro.c -- 2.21.0

2 8

[PATCH v4 0/5] MFD/ASoC: Add support for Intel Bay Trail boards with WM5102 codec
by Hans de Goede 08 Feb '21

08 Feb '21

Hi All, Here is v4 of my series to add support for Intel Bay Trail based devices which use a WM5102 codec for audio output/input. This was developed and tested on a Lenovo Yoga Tablet 1051L. The MFD and ASoC parts do not have any build-time dependencies on each other. But the follow-up jack-detect series does have patches depending on each-other and on this series. So IMHO it would be best if this entire series would be merged through the MFD tree to make merging the follow-up series easier. Mark, if that is ok with you (and you are happy with the ASoC changes) can you please Ack this ? Changes in v4: - Add a comment to the irq-flags override explaining that theoretically DSDTs using IRQF_TRIGGER_FALLING could be correct on boards where the IRQ controller does not support active low level interrupts Changes in v3: - Fix compilation error when CONFIG_ACPI is not set Changes in v2: - Split my WM5102 work into 2 series, one series adding basic support for Bay Trail boards with a WM5102 codec and a second series with the jack-detect work - Various other minor code tweaks Hans de Goede (4): mfd: arizona: Add MODULE_SOFTDEP("pre: arizona_ldo1") mfd: arizona: Replace arizona_of_get_type() with device_get_match_data() mfd: arizona: Add support for ACPI enumeration of WM5102 connected over SPI ASoC: Intel: Add DMI quirk table to soc_intel_is_byt_cr() Pierre-Louis Bossart (1): ASoC: Intel: bytcr_wm5102: Add machine driver for BYT/WM5102 drivers/mfd/arizona-core.c | 11 - drivers/mfd/arizona-i2c.c | 11 +- drivers/mfd/arizona-spi.c | 138 +++++- drivers/mfd/arizona.h | 9 - sound/soc/intel/boards/Kconfig | 12 + sound/soc/intel/boards/Makefile | 2 + sound/soc/intel/boards/bytcr_wm5102.c | 465 ++++++++++++++++++ .../intel/common/soc-acpi-intel-byt-match.c | 16 + sound/soc/intel/common/soc-intel-quirks.h | 25 + 9 files changed, 661 insertions(+), 28 deletions(-) create mode 100644 sound/soc/intel/boards/bytcr_wm5102.c Regards, Hans

4 34

[PATCH v2] ASoC: SOF: debug: Fix a potential issue on string buffer termination
by Hui Wang 08 Feb '21

08 Feb '21

The function simple_write_to_buffer() doesn't add string termination at the end of buf, we need to handle it on our own. This change refers to the function tokenize_input() in debug.c and the function sof_dfsentry_trace_filter_write() in trace.c. Fixes: 091c12e1f50c ("ASoC: SOF: debug: add new debugfs entries for IPC flood test") Reviewed-by: Kai Vehmanen <kai.vehmanen(a)linux.intel.com> Signed-off-by: Hui Wang <hui.wang(a)canonical.com> --- sound/soc/sof/debug.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/sof/debug.c b/sound/soc/sof/debug.c index 30213a1beaaa..715a374b33cf 100644 --- a/sound/soc/sof/debug.c +++ b/sound/soc/sof/debug.c @@ -352,7 +352,7 @@ static ssize_t sof_dfsentry_write(struct file *file, const char __user *buffer, char *string; int ret; - string = kzalloc(count, GFP_KERNEL); + string = kzalloc(count+1, GFP_KERNEL); if (!string) return -ENOMEM; -- 2.25.1

3 2

[PATCH v3 0/2] Rename audio graph export functions
by Sameer Pujar 08 Feb '21

08 Feb '21

This series renames exported functions from audio graph for a better global visibility. In doing so update the references in audio graph and Tegra audio graph card drivers. Changelog ========= v2 -> v3: --------- [Patch v3 1/2]: - Squashed "patch v2 1/3" and "patch v2 2/3". Updated commit message accordingly. - Add "Acked-by" tag from Morimoto-san. [Patch v3 2/2]: - Add "Acked-by" tag from Morimoto-san. v1 -> v2: --------- [Patch v2 1/3]: - Rename graph_parse_of() to audio_graph_parse_of() and graph_card_probe() to audio_graph_card_probe() as well. - Update above references in audio graph driver. [Patch v2 2/3]: New patch - Update references for audio_graph_parse_of() and audio_graph_card_probe() in Tegra graph driver. - Add "Depends-on" tag [Patch v2 3/3]: - Update commit message to add "Depends-on" tag. Sameer Pujar (2): ASoC: audio-graph: Rename functions needed for export ASoC: tegra: Add driver remove() callback include/sound/graph_card.h | 6 ++++-- sound/soc/generic/audio-graph-card.c | 17 +++++++++-------- sound/soc/tegra/tegra_audio_graph_card.c | 9 +++++---- 3 files changed, 18 insertions(+), 14 deletions(-) -- 2.7.4

2 3

[PATCH] ASoC: fsl: constify static snd_soc_dai_ops structs
by Rikard Falkeborn 08 Feb '21

08 Feb '21

The only usage of these is to assign their address to the 'ops' field in the snd_soc_dai_driver struct, which is a pointer to const. Make them const to allow the compiler to put them in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn(a)gmail.com> --- sound/soc/fsl/fsl_easrc.c | 2 +- sound/soc/fsl/fsl_micfil.c | 2 +- sound/soc/fsl/fsl_xcvr.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/fsl/fsl_easrc.c b/sound/soc/fsl/fsl_easrc.c index 60951a8aabd3..636a702f37a6 100644 --- a/sound/soc/fsl/fsl_easrc.c +++ b/sound/soc/fsl/fsl_easrc.c @@ -1530,7 +1530,7 @@ static int fsl_easrc_hw_free(struct snd_pcm_substream *substream, return 0; } -static struct snd_soc_dai_ops fsl_easrc_dai_ops = { +static const struct snd_soc_dai_ops fsl_easrc_dai_ops = { .startup = fsl_easrc_startup, .trigger = fsl_easrc_trigger, .hw_params = fsl_easrc_hw_params, diff --git a/sound/soc/fsl/fsl_micfil.c b/sound/soc/fsl/fsl_micfil.c index 8aedf6590b28..5935af2e5ff4 100644 --- a/sound/soc/fsl/fsl_micfil.c +++ b/sound/soc/fsl/fsl_micfil.c @@ -381,7 +381,7 @@ static int fsl_micfil_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id, return ret; } -static struct snd_soc_dai_ops fsl_micfil_dai_ops = { +static const struct snd_soc_dai_ops fsl_micfil_dai_ops = { .startup = fsl_micfil_startup, .trigger = fsl_micfil_trigger, .hw_params = fsl_micfil_hw_params, diff --git a/sound/soc/fsl/fsl_xcvr.c b/sound/soc/fsl/fsl_xcvr.c index dd228b421e2c..6dd0a5fcd455 100644 --- a/sound/soc/fsl/fsl_xcvr.c +++ b/sound/soc/fsl/fsl_xcvr.c @@ -857,7 +857,7 @@ static struct snd_kcontrol_new fsl_xcvr_tx_ctls[] = { }, }; -static struct snd_soc_dai_ops fsl_xcvr_dai_ops = { +static const struct snd_soc_dai_ops fsl_xcvr_dai_ops = { .prepare = fsl_xcvr_prepare, .startup = fsl_xcvr_startup, .shutdown = fsl_xcvr_shutdown, -- 2.30.0

3 2

[PATCH v2] ASoC: fsl_esai: Remove unused 'imx' field
by Fabio Estevam 08 Feb '21

08 Feb '21

The 'imx' field is not used anywhere, so get rid of it. Signed-off-by: Fabio Estevam <festevam(a)gmail.com> --- Changes since v1: - Also remove the comment about the imx member. sound/soc/fsl/fsl_esai.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c index bac9f059c9fc..08056fa0a0fa 100644 --- a/sound/soc/fsl/fsl_esai.c +++ b/sound/soc/fsl/fsl_esai.c @@ -23,11 +23,9 @@ /** * struct fsl_esai_soc_data - soc specific data - * @imx: for imx platform * @reset_at_xrun: flags for enable reset operaton */ struct fsl_esai_soc_data { - bool imx; bool reset_at_xrun; }; @@ -86,17 +84,14 @@ struct fsl_esai { }; static struct fsl_esai_soc_data fsl_esai_vf610 = { - .imx = false, .reset_at_xrun = true, }; static struct fsl_esai_soc_data fsl_esai_imx35 = { - .imx = true, .reset_at_xrun = true, }; static struct fsl_esai_soc_data fsl_esai_imx6ull = { - .imx = true, .reset_at_xrun = false, }; -- 2.25.1

3 2

[PATCH] ASoC: fsl_esai: Remove unused 'imx' field
by Fabio Estevam 08 Feb '21

08 Feb '21

The 'imx' field is not used anywhere, so get rid of it. Signed-off-by: Fabio Estevam <festevam(a)gmail.com> --- sound/soc/fsl/fsl_esai.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c index 614e22a95f53..ae679fa4aed9 100644 --- a/sound/soc/fsl/fsl_esai.c +++ b/sound/soc/fsl/fsl_esai.c @@ -27,7 +27,6 @@ * @reset_at_xrun: flags for enable reset operaton */ struct fsl_esai_soc_data { - bool imx; bool reset_at_xrun; }; @@ -86,17 +85,14 @@ struct fsl_esai { }; static struct fsl_esai_soc_data fsl_esai_vf610 = { - .imx = false, .reset_at_xrun = true, }; static struct fsl_esai_soc_data fsl_esai_imx35 = { - .imx = true, .reset_at_xrun = true, }; static struct fsl_esai_soc_data fsl_esai_imx6ull = { - .imx = true, .reset_at_xrun = false, }; -- 2.17.1

2 1