February 2021 - Alsa-devel - mailman.alsa-project.org

[PATCH AUTOSEL 5.11 48/67] ALSA: usb-audio: Add DJM-450 to the quirks table
by Sasha Levin 24 Feb '21

24 Feb '21

From: Olivia Mackintosh <livvy(a)base.nu> [ Upstream commit 9119e5661eab2c56a96b936cde49c6740dc49ff9 ] As with most Pioneer devices, the device descriptor is vendor specific and as such, the number of channels, the PCM format, endpoints and sample rate need to be specified. This device has 8 inputs and 8 outputs and a sample rate of 48000 only. The PCM format is S24_3LE like other devices. There seems to be an appetite for reducing duplication amongs these Pioneer patches but again, I feel this is a step to be taken after support has been added as it's not completely clear where the commonalities are. Signed-off-by: Olivia Mackintosh <livvy(a)base.nu> Link: https://lore.kernel.org/r/20210202134225.3217-3-livvy@base.nu Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/usb/quirks-table.h | 57 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 57 insertions(+) diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index 93d55cd1a5a4c..1165a5ac60f22 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -3817,6 +3817,63 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"), } } }, +{ + /* + * Pioneer DJ DJM-450 + * PCM is 8 channels out @ 48 fixed (endpoint 0x01) + * and 8 channels in @ 48 fixed (endpoint 0x82). + */ + USB_DEVICE_VENDOR_SPEC(0x2b73, 0x0013), + .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + .ifnum = QUIRK_ANY_INTERFACE, + .type = QUIRK_COMPOSITE, + .data = (const struct snd_usb_audio_quirk[]) { + { + .ifnum = 0, + .type = QUIRK_AUDIO_FIXED_ENDPOINT, + .data = &(const struct audioformat) { + .formats = SNDRV_PCM_FMTBIT_S24_3LE, + .channels = 8, // outputs + .iface = 0, + .altsetting = 1, + .altset_idx = 1, + .endpoint = 0x01, + .ep_attr = USB_ENDPOINT_XFER_ISOC| + USB_ENDPOINT_SYNC_ASYNC, + .rates = SNDRV_PCM_RATE_48000, + .rate_min = 48000, + .rate_max = 48000, + .nr_rates = 1, + .rate_table = (unsigned int[]) { 48000 } + } + }, + { + .ifnum = 0, + .type = QUIRK_AUDIO_FIXED_ENDPOINT, + .data = &(const struct audioformat) { + .formats = SNDRV_PCM_FMTBIT_S24_3LE, + .channels = 8, // inputs + .iface = 0, + .altsetting = 1, + .altset_idx = 1, + .endpoint = 0x82, + .ep_idx = 1, + .ep_attr = USB_ENDPOINT_XFER_ISOC| + USB_ENDPOINT_SYNC_ASYNC| + USB_ENDPOINT_USAGE_IMPLICIT_FB, + .rates = SNDRV_PCM_RATE_48000, + .rate_min = 48000, + .rate_max = 48000, + .nr_rates = 1, + .rate_table = (unsigned int[]) { 48000 } + } + }, + { + .ifnum = -1 + } + } + } +}, #undef USB_DEVICE_VENDOR_SPEC #undef USB_AUDIO_DEVICE -- 2.27.0

1 0

[PATCH AUTOSEL 5.11 47/67] ALSA: usb-audio: Add DJM450 to Pioneer format quirk
by Sasha Levin 24 Feb '21

24 Feb '21

From: Olivia Mackintosh <livvy(a)base.nu> [ Upstream commit 3b85f5fc75d564a9eb4171dcb6b8687b080cd4d5 ] Like the DJM-750, ensure that the format control message is passed to the device when opening a stream. It seems as though fmt->sync_ep is not always set when this function is called hence the passing of the value at the call site. If this can be fixed, fmt->sync_up should be used as the wvalue. There doesn't seem to be a "cpu_to_le24" type function defined hence for the open code but I did see a similar thing done in Bluez lib. Perhaps we can get these definitions defined in byteorder.h. See hci_cpu_to_le24 in include/net/bluetooth/hci.h:2543 for similar usage. Signed-off-by: Olivia Mackintosh <livvy(a)base.nu> Link: https://lore.kernel.org/r/20210202134225.3217-2-livvy@base.nu Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/usb/quirks.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index e196e364cef19..9ba4682ebc482 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1470,6 +1470,23 @@ static void set_format_emu_quirk(struct snd_usb_substream *subs, subs->pkt_offset_adj = (emu_samplerate_id >= EMU_QUIRK_SR_176400HZ) ? 4 : 0; } +static int pioneer_djm_set_format_quirk(struct snd_usb_substream *subs, + u16 windex) +{ + unsigned int cur_rate = subs->data_endpoint->cur_rate; + u8 sr[3]; + // Convert to little endian + sr[0] = cur_rate & 0xff; + sr[1] = (cur_rate >> 8) & 0xff; + sr[2] = (cur_rate >> 16) & 0xff; + usb_set_interface(subs->dev, 0, 1); + // we should derive windex from fmt-sync_ep but it's not set + snd_usb_ctl_msg(subs->stream->chip->dev, + usb_rcvctrlpipe(subs->stream->chip->dev, 0), + 0x01, 0x22, 0x0100, windex, &sr, 0x0003); + return 0; +} + void snd_usb_set_format_quirk(struct snd_usb_substream *subs, const struct audioformat *fmt) { @@ -1483,6 +1500,9 @@ void snd_usb_set_format_quirk(struct snd_usb_substream *subs, case USB_ID(0x534d, 0x2109): /* MacroSilicon MS2109 */ subs->stream_offset_adj = 2; break; + case USB_ID(0x2b73, 0x0013): /* Pioneer DJM-450 */ + pioneer_djm_set_format_quirk(subs, 0x0082); + break; } } -- 2.27.0

1 0

[PATCH AUTOSEL 5.11 34/67] ALSA: usb-audio: Add support for Pioneer DJM-750
by Sasha Levin 24 Feb '21

24 Feb '21

From: Olivia Mackintosh <livvy(a)base.nu> [ Upstream commit b952ac76a20bc0b23cd7e22de19fb407713238a3 ] This adds the Pioneer DJ DJM-750 to the quirks table and ensures skip_pioneer_sync_ep() is (also) called: this device uses the vendor ID of 0x08e4 (I'm not sure why they use multiple vendor IDs but many just like to be awkward it seems). Playback on all 8 channels works. I'll likely keep this working in the future and submit futher patches and improvements as necessary. Signed-off-by: Olivia Mackintosh <livvy(a)base.nu> Link: https://lore.kernel.org/r/20210118130621.77miiie47wp7mump@base.nu Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/usb/implicit.c | 3 +- sound/usb/quirks-table.h | 60 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 62 insertions(+), 1 deletion(-) diff --git a/sound/usb/implicit.c b/sound/usb/implicit.c index 521cc846d9d9f..e7216d0b860d8 100644 --- a/sound/usb/implicit.c +++ b/sound/usb/implicit.c @@ -302,7 +302,8 @@ static int audioformat_implicit_fb_quirk(struct snd_usb_audio *chip, /* Pioneer devices with vendor spec class */ if (attr == USB_ENDPOINT_SYNC_ASYNC && alts->desc.bInterfaceClass == USB_CLASS_VENDOR_SPEC && - USB_ID_VENDOR(chip->usb_id) == 0x2b73 /* Pioneer */) { + (USB_ID_VENDOR(chip->usb_id) == 0x2b73 || /* Pioneer */ + USB_ID_VENDOR(chip->usb_id) == 0x08e4 /* Pioneer */)) { if (skip_pioneer_sync_ep(chip, fmt, alts)) return 1; } diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index c8a4bdf18207c..93d55cd1a5a4c 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -3757,6 +3757,66 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"), } } }, +{ + /* + * Pioneer DJ DJM-750 + * 8 channels playback & 8 channels capture @ 44.1/48/96kHz S24LE + */ + USB_DEVICE_VENDOR_SPEC(0x08e4, 0x017f), + .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + .ifnum = QUIRK_ANY_INTERFACE, + .type = QUIRK_COMPOSITE, + .data = (const struct snd_usb_audio_quirk[]) { + { + .ifnum = 0, + .type = QUIRK_AUDIO_FIXED_ENDPOINT, + .data = &(const struct audioformat) { + .formats = SNDRV_PCM_FMTBIT_S24_3LE, + .channels = 8, + .iface = 0, + .altsetting = 1, + .altset_idx = 1, + .endpoint = 0x05, + .ep_attr = USB_ENDPOINT_XFER_ISOC| + USB_ENDPOINT_SYNC_ASYNC, + .rates = SNDRV_PCM_RATE_44100| + SNDRV_PCM_RATE_48000| + SNDRV_PCM_RATE_96000, + .rate_min = 44100, + .rate_max = 96000, + .nr_rates = 3, + .rate_table = (unsigned int[]) { 44100, 48000, 96000 } + } + }, + { + .ifnum = 0, + .type = QUIRK_AUDIO_FIXED_ENDPOINT, + .data = &(const struct audioformat) { + .formats = SNDRV_PCM_FMTBIT_S24_3LE, + .channels = 8, + .iface = 0, + .altsetting = 1, + .altset_idx = 1, + .endpoint = 0x86, + .ep_idx = 1, + .ep_attr = USB_ENDPOINT_XFER_ISOC| + USB_ENDPOINT_SYNC_ASYNC| + USB_ENDPOINT_USAGE_IMPLICIT_FB, + .rates = SNDRV_PCM_RATE_44100| + SNDRV_PCM_RATE_48000| + SNDRV_PCM_RATE_96000, + .rate_min = 44100, + .rate_max = 96000, + .nr_rates = 3, + .rate_table = (unsigned int[]) { 44100, 48000, 96000 } + } + }, + { + .ifnum = -1 + } + } + } +}, #undef USB_DEVICE_VENDOR_SPEC #undef USB_AUDIO_DEVICE -- 2.27.0

1 0

[PATCH AUTOSEL 5.11 33/67] ASoC: Intel: bytcr_rt5640: Add new BYT_RT5640_NO_SPEAKERS quirk-flag
by Sasha Levin 24 Feb '21

24 Feb '21

From: Hans de Goede <hdegoede(a)redhat.com> [ Upstream commit 1851ccf9e155b2a6f6cca1a7bd49325f5efbd5d2 ] Some devices, like mini PCs/media/top-set boxes do not have any speakers at all, an example of the is the Mele PCG03 Mini PC. Add a new BYT_RT5640_NO_SPEAKERS quirk-flag which when sets does not add speaker routes and modifies the components and the (optional) long_name strings to reflect that there are no speakers. Cc: Rasmus Porsager <rasmus(a)beat.dk> Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Link: https://lore.kernel.org/r/20210109210119.159032-2-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/intel/boards/bytcr_rt5640.c | 26 +++++++++++++++++++------- 1 file changed, 19 insertions(+), 7 deletions(-) diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index 5520d7c800196..dce2df30d4c5b 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -71,6 +71,7 @@ enum { #define BYT_RT5640_SSP0_AIF2 BIT(21) #define BYT_RT5640_MCLK_EN BIT(22) #define BYT_RT5640_MCLK_25MHZ BIT(23) +#define BYT_RT5640_NO_SPEAKERS BIT(24) #define BYTCR_INPUT_DEFAULTS \ (BYT_RT5640_IN3_MAP | \ @@ -132,6 +133,8 @@ static void log_quirks(struct device *dev) dev_info(dev, "quirk JD_NOT_INV enabled\n"); if (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER) dev_info(dev, "quirk MONO_SPEAKER enabled\n"); + if (byt_rt5640_quirk & BYT_RT5640_NO_SPEAKERS) + dev_info(dev, "quirk NO_SPEAKERS enabled\n"); if (byt_rt5640_quirk & BYT_RT5640_DIFF_MIC) dev_info(dev, "quirk DIFF_MIC enabled\n"); if (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF1) { @@ -946,7 +949,7 @@ static int byt_rt5640_init(struct snd_soc_pcm_runtime *runtime) ret = snd_soc_dapm_add_routes(&card->dapm, byt_rt5640_mono_spk_map, ARRAY_SIZE(byt_rt5640_mono_spk_map)); - } else { + } else if (!(byt_rt5640_quirk & BYT_RT5640_NO_SPEAKERS)) { ret = snd_soc_dapm_add_routes(&card->dapm, byt_rt5640_stereo_spk_map, ARRAY_SIZE(byt_rt5640_stereo_spk_map)); @@ -1188,6 +1191,7 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; static const char * const map_name[] = { "dmic1", "dmic2", "in1", "in3" }; + __maybe_unused const char *spk_type; const struct dmi_system_id *dmi_id; struct byt_rt5640_private *priv; struct snd_soc_acpi_mach *mach; @@ -1196,7 +1200,7 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) bool sof_parent; int ret_val = 0; int dai_index = 0; - int i; + int i, cfg_spk; is_bytcr = false; priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); @@ -1335,16 +1339,24 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) } } + if (byt_rt5640_quirk & BYT_RT5640_NO_SPEAKERS) { + cfg_spk = 0; + spk_type = "none"; + } else if (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER) { + cfg_spk = 1; + spk_type = "mono"; + } else { + cfg_spk = 2; + spk_type = "stereo"; + } + snprintf(byt_rt5640_components, sizeof(byt_rt5640_components), - "cfg-spk:%s cfg-mic:%s", - (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER) ? "1" : "2", + "cfg-spk:%d cfg-mic:%s", cfg_spk, map_name[BYT_RT5640_MAP(byt_rt5640_quirk)]); byt_rt5640_card.components = byt_rt5640_components; #if !IS_ENABLED(CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES) snprintf(byt_rt5640_long_name, sizeof(byt_rt5640_long_name), - "bytcr-rt5640-%s-spk-%s-mic", - (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER) ? - "mono" : "stereo", + "bytcr-rt5640-%s-spk-%s-mic", spk_type, map_name[BYT_RT5640_MAP(byt_rt5640_quirk)]); byt_rt5640_card.long_name = byt_rt5640_long_name; #endif -- 2.27.0

1 0

[PATCH alsa-lib 1/3] mixer: Unify simple_none: base_len() exception handling
by Hans de Goede 24 Feb '21

24 Feb '21

Unify simple_none: base_len() exception handling: 1. In the "Input Source" and "3D Control" cases the base-name is the same as the full-name and base_len() simply returns strlen(name). Instead of returning 0 when the type is unknown, set the type to CTL_SINGLE and return strlen(name). This allows removing the special case for base_len() returning 0 in simple_event_add(). 2. Move the special handling for "Capture Volume" and "Capture Switch" from simple_event_add() to base_len(), so that we handle all exceptions inside base_len(). Instead of handling some special cases in base_len() and other special cases in simple_event_add(). Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> --- src/mixer/simple_none.c | 43 ++++++++++++++++++++++++----------------- 1 file changed, 25 insertions(+), 18 deletions(-) diff --git a/src/mixer/simple_none.c b/src/mixer/simple_none.c index e9dc1730..7da7de1e 100644 --- a/src/mixer/simple_none.c +++ b/src/mixer/simple_none.c @@ -907,11 +907,22 @@ static const struct suf { }; #endif -/* Return base length or 0 on failure */ +/* Return base length */ static int base_len(const char *name, selem_ctl_type_t *type) { const struct suf *p; size_t nlen = strlen(name); + + /* exception: "Capture Volume" and "Capture Switch" */ + if (!strcmp(name, "Capture Volume")) { + *type = CTL_CAPTURE_VOLUME; + return strlen("Capture"); + } + if (!strcmp(name, "Capture Switch")) { + *type = CTL_CAPTURE_SWITCH; + return strlen("Capture"); + } + p = suffixes; while (p->suffix) { size_t slen = strlen(p->suffix); @@ -944,7 +955,9 @@ static int base_len(const char *name, selem_ctl_type_t *type) return strlen(name); } } - return 0; + + *type = CTL_SINGLE; + return strlen(name); } @@ -1605,8 +1618,10 @@ static int simple_add1(snd_mixer_class_t *class, const char *name, static int simple_event_add(snd_mixer_class_t *class, snd_hctl_elem_t *helem) { const char *name = snd_hctl_elem_get_name(helem); + selem_ctl_type_t type; + char ename[128]; size_t len; - selem_ctl_type_t type = CTL_SINGLE; /* to shut up warning */ + if (snd_hctl_elem_get_interface(helem) != SND_CTL_ELEM_IFACE_MIXER) return 0; if (strcmp(name, "Capture Source") == 0) { @@ -1633,22 +1648,14 @@ static int simple_event_add(snd_mixer_class_t *class, snd_hctl_elem_t *helem) } return 0; } + len = base_len(name, &type); - if (len == 0) { - return simple_add1(class, name, helem, CTL_SINGLE, 0); - } else { - char ename[128]; - if (len >= sizeof(ename)) - len = sizeof(ename) - 1; - memcpy(ename, name, len); - ename[len] = 0; - /* exception: Capture Volume and Capture Switch */ - if (type == CTL_GLOBAL_VOLUME && !strcmp(ename, "Capture")) - type = CTL_CAPTURE_VOLUME; - else if (type == CTL_GLOBAL_SWITCH && !strcmp(ename, "Capture")) - type = CTL_CAPTURE_SWITCH; - return simple_add1(class, ename, helem, type, 0); - } + if (len >= sizeof(ename)) + len = sizeof(ename) - 1; + memcpy(ename, name, len); + ename[len] = 0; + + return simple_add1(class, ename, helem, type, 0); } static int simple_event_remove(snd_hctl_elem_t *helem, -- 2.30.1

1 2

[PATCH v2] leds: trigger: audio: Add an activate callback to ensure the initial brightness is set
by Hans de Goede 24 Feb '21

24 Feb '21

Some 2-in-1s with a detachable (USB) keyboard(dock) have mute-LEDs in the speaker- and/or mic-mute keys on the keyboard. Examples of this are the Lenovo Thinkpad10 tablet (with its USB kbd-dock) and the HP x2 10 series. The detachable nature of these keyboards means that the keyboard and thus the mute LEDs may show up after the user (or userspace restoring old mixer settings) has muted the speaker and/or mic. Current LED-class devices with a default_trigger of "audio-mute" or "audio-micmute" initialize the brightness member of led_classdev with ledtrig_audio_get() before registering the LED. This makes the software state after attaching the keyboard match the actual audio mute state, e.g. cat /sys/class/leds/foo/brightness will show the right value. But before this commit nothing was actually calling the led_classdev's brightness_set[_blocking] callback so the value returned by ledtrig_audio_get() was never actually being sent to the hw, leading to the mute LEDs staying in their default power-on state, after attaching the keyboard, even if ledtrig_audio_get() returned a different state. This could be fixed by having the individual LED drivers call brightness_set[_blocking] themselves after registering the LED, but this really is something which should be done by a led-trigger activate callback. Add an activate callback for this, fixing the issue of the mute LEDs being out of sync after (re)attaching the keyboard. Cc: Takashi Iwai <tiwai(a)suse.de> Fixes: faa2541f5b1a ("leds: trigger: Introduce audio mute LED trigger") Reviewed-by: Marek Behún <kabel(a)kernel.org> Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> --- Changes in v2: - Fix a couple of grammar errors in the commit-message - Add Marek's Reviewed-by (thank you) --- drivers/leds/trigger/ledtrig-audio.c | 37 ++++++++++++++++++++++------ 1 file changed, 29 insertions(+), 8 deletions(-) diff --git a/drivers/leds/trigger/ledtrig-audio.c b/drivers/leds/trigger/ledtrig-audio.c index f76621e88482..c6b437e6369b 100644 --- a/drivers/leds/trigger/ledtrig-audio.c +++ b/drivers/leds/trigger/ledtrig-audio.c @@ -6,10 +6,33 @@ #include <linux/kernel.h> #include <linux/leds.h> #include <linux/module.h> +#include "../leds.h" -static struct led_trigger *ledtrig_audio[NUM_AUDIO_LEDS]; static enum led_brightness audio_state[NUM_AUDIO_LEDS]; +static int ledtrig_audio_mute_activate(struct led_classdev *led_cdev) +{ + led_set_brightness_nosleep(led_cdev, audio_state[LED_AUDIO_MUTE]); + return 0; +} + +static int ledtrig_audio_micmute_activate(struct led_classdev *led_cdev) +{ + led_set_brightness_nosleep(led_cdev, audio_state[LED_AUDIO_MICMUTE]); + return 0; +} + +static struct led_trigger ledtrig_audio[NUM_AUDIO_LEDS] = { + [LED_AUDIO_MUTE] = { + .name = "audio-mute", + .activate = ledtrig_audio_mute_activate, + }, + [LED_AUDIO_MICMUTE] = { + .name = "audio-micmute", + .activate = ledtrig_audio_micmute_activate, + }, +}; + enum led_brightness ledtrig_audio_get(enum led_audio type) { return audio_state[type]; @@ -19,24 +42,22 @@ EXPORT_SYMBOL_GPL(ledtrig_audio_get); void ledtrig_audio_set(enum led_audio type, enum led_brightness state) { audio_state[type] = state; - led_trigger_event(ledtrig_audio[type], state); + led_trigger_event(&ledtrig_audio[type], state); } EXPORT_SYMBOL_GPL(ledtrig_audio_set); static int __init ledtrig_audio_init(void) { - led_trigger_register_simple("audio-mute", - &ledtrig_audio[LED_AUDIO_MUTE]); - led_trigger_register_simple("audio-micmute", - &ledtrig_audio[LED_AUDIO_MICMUTE]); + led_trigger_register(&ledtrig_audio[LED_AUDIO_MUTE]); + led_trigger_register(&ledtrig_audio[LED_AUDIO_MICMUTE]); return 0; } module_init(ledtrig_audio_init); static void __exit ledtrig_audio_exit(void) { - led_trigger_unregister_simple(ledtrig_audio[LED_AUDIO_MUTE]); - led_trigger_unregister_simple(ledtrig_audio[LED_AUDIO_MICMUTE]); + led_trigger_unregister(&ledtrig_audio[LED_AUDIO_MUTE]); + led_trigger_unregister(&ledtrig_audio[LED_AUDIO_MICMUTE]); } module_exit(ledtrig_audio_exit); -- 2.30.1

3 3

[PATCH -next] sound: n64: Fix return value check in n64audio_probe()
by Wei Yongjun 24 Feb '21

24 Feb '21

In case of error, the function devm_platform_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: 1448f8acf4cc ("sound: Add n64 driver") Reported-by: Hulk Robot <hulkci(a)huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1(a)huawei.com> --- sound/mips/snd-n64.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/mips/snd-n64.c b/sound/mips/snd-n64.c index ca6b4b99da98..e35e93157755 100644 --- a/sound/mips/snd-n64.c +++ b/sound/mips/snd-n64.c @@ -312,14 +312,14 @@ static int __init n64audio_probe(struct platform_device *pdev) } priv->mi_reg_base = devm_platform_ioremap_resource(pdev, 0); - if (!priv->mi_reg_base) { - err = -EINVAL; + if (IS_ERR(priv->mi_reg_base)) { + err = PTR_ERR(priv->mi_reg_base); goto fail_dma_alloc; } priv->ai_reg_base = devm_platform_ioremap_resource(pdev, 1); - if (!priv->ai_reg_base) { - err = -EINVAL; + if (IS_ERR(priv->ai_reg_base)) { + err = PTR_ERR(priv->ai_reg_base); goto fail_dma_alloc; }

3 2

Re: [PATCH] ASoC: rt5682: remove jack detect delay
by Takashi Iwai 23 Feb '21

23 Feb '21

On Thu, 18 Feb 2021 09:38:53 +0100, Shuming [范書銘] <shumingf(a)realtek.com> wrote: > > > There is a 250ms delay on the jack detect interrupt currently, this delay is > > observable to users who are using inline controls. It can also mask multiple > > presses which is a negative experience. > > > > Cc: Bard liao <yung-chuan.liao(a)linux.intel.com> > > Cc: Shuming Fan <shumingf(a)realtek.com> > > > > Signed-off-by: Curtis Malainey <cujomalainey(a)chromium.org> > > --- > > sound/soc/codecs/rt5682-i2c.c | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/sound/soc/codecs/rt5682-i2c.c b/sound/soc/codecs/rt5682-i2c.c > > index 93c1603b42f1..b15c3e7d1f59 100644 > > --- a/sound/soc/codecs/rt5682-i2c.c > > +++ b/sound/soc/codecs/rt5682-i2c.c > > @@ -78,7 +78,7 @@ static irqreturn_t rt5682_irq(int irq, void *data) > > struct rt5682_priv *rt5682 = data; > > > > mod_delayed_work(system_power_efficient_wq, > > - &rt5682->jack_detect_work, msecs_to_jiffies(250)); > > + &rt5682->jack_detect_work, 0); > > How about using the device property to adjust the delay time? > I think it should keep the workqueue to do the jack/button detection because the jack type detection will take some times to do. One might check twice (or more) if it's not certain, too. That is, check the jack immediately, and if the jack state really changed, report it so. OTOH, if the jack state doesn't change from the old state, it can retry after some delay. thanks, Takashi

3 7

[PATCH v2 0/6] ASoC: samsung: remove cppcheck warnings
by Pierre-Louis Bossart 23 Feb '21

23 Feb '21

No functional changes except for patch 3 and 4 where missing error checks were added for consistency. v2: added Krzysztof Kozlowski's tags added fix for first patch already merged as suggested by Krzysztof Kozlowski moved variable to lower scope in patch6 Pierre-Louis Bossart (6): ASoC: samsung: tm2_wm5510: fix check of of_parse return value ASoC: samsung: i2s: remove unassigned variable ASoC: samsung: s3c24xx_simtec: add missing error check ASoC: samsung: smdk_wm8994: add missing return ASoC: samsung: snow: remove useless test ASoC: samsung: tm2_wm5510: remove shadowed variable sound/soc/samsung/i2s.c | 3 +-- sound/soc/samsung/s3c24xx_simtec.c | 5 +++++ sound/soc/samsung/smdk_wm8994.c | 1 + sound/soc/samsung/snow.c | 5 +---- sound/soc/samsung/tm2_wm5110.c | 5 +++-- 5 files changed, 11 insertions(+), 8 deletions(-) -- 2.25.1

4 17

[PATCH] ASoC: fsl_ssi: Fix TDM slot setup for I2S mode
by Alexander Shiyan 23 Feb '21

23 Feb '21

When using the driver in I2S TDM mode, the _fsl_ssi_set_dai_fmt() function rewrites the number of slots previously set by the fsl_ssi_set_dai_tdm_slot() function to 2 by default. To fix this, let's use the saved slot count value or, if TDM is not used and the slot count is not set, proceed as before. Fixes: 4f14f5c11db1 ("ASoC: fsl_ssi: Fix number of words per frame for I2S-slave mode") Signed-off-by: Alexander Shiyan <shc_work(a)mail.ru> --- sound/soc/fsl/fsl_ssi.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index 404be27c15fe..1d774c876c52 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -878,6 +878,7 @@ static int fsl_ssi_hw_free(struct snd_pcm_substream *substream, static int _fsl_ssi_set_dai_fmt(struct fsl_ssi *ssi, unsigned int fmt) { u32 strcr = 0, scr = 0, stcr, srcr, mask; + unsigned int slots; ssi->dai_fmt = fmt; @@ -909,10 +910,11 @@ static int _fsl_ssi_set_dai_fmt(struct fsl_ssi *ssi, unsigned int fmt) return -EINVAL; } + slots = ssi->slots ? : 2; regmap_update_bits(ssi->regs, REG_SSI_STCCR, - SSI_SxCCR_DC_MASK, SSI_SxCCR_DC(2)); + SSI_SxCCR_DC_MASK, SSI_SxCCR_DC(slots)); regmap_update_bits(ssi->regs, REG_SSI_SRCCR, - SSI_SxCCR_DC_MASK, SSI_SxCCR_DC(2)); + SSI_SxCCR_DC_MASK, SSI_SxCCR_DC(slots)); /* Data on rising edge of bclk, frame low, 1clk before data */ strcr |= SSI_STCR_TFSI | SSI_STCR_TSCKP | SSI_STCR_TEFS; -- 2.26.2

3 2