December 2021 - Alsa-devel - mailman.alsa-project.org

[PATCH 0/4] ASoC: codecs: Qualcomm codecs fix kcontrol put return values
by Srinivas Kandagatla 01 Dec '21

01 Dec '21

Hi Mark, Some recent testing found few issues with wcd934x and wsa881x codec drivers that are not handling kcontrol put correctly. This patchset fixes those instances. Along with this there is also a bug fix for the way channel list was updated for wcd934x dais. --srini Srinivas Kandagatla (4): ASoC: codecs: wcd934x: handle channel mappping list correctly ASoC: codecs: wcd934x: remove redundant ret variable ASoC: codecs: wcd934x: return correct value from mixer put ASoC: codecs: wsa881x: fix return values from kcontrol put sound/soc/codecs/wcd934x.c | 132 ++++++++++++++++++++++++++----------- sound/soc/codecs/wsa881x.c | 16 +++-- 2 files changed, 107 insertions(+), 41 deletions(-) -- 2.21.0

2 8

[PATCH] ASoC: amd: fix uninitialized variable in snd_acp6x_probe()
by Dan Carpenter 01 Dec '21

01 Dec '21

The "index" is potentially used without being initialized on the error path. Fixes: fc329c1de498 ("ASoC: amd: add platform devices for acp6x pdm driver and dmic driver") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> --- sound/soc/amd/yc/pci-acp6x.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/soc/amd/yc/pci-acp6x.c b/sound/soc/amd/yc/pci-acp6x.c index 957eeb6fb8e3..7e9a9a9d8ddd 100644 --- a/sound/soc/amd/yc/pci-acp6x.c +++ b/sound/soc/amd/yc/pci-acp6x.c @@ -146,10 +146,11 @@ static int snd_acp6x_probe(struct pci_dev *pci, { struct acp6x_dev_data *adata; struct platform_device_info pdevinfo[ACP6x_DEVS]; - int ret, index; + int index = 0; int val = 0x00; u32 addr; unsigned int irqflags; + int ret; irqflags = IRQF_SHARED; /* Yellow Carp device check */ -- 2.20.1

2 1

[PATCH] ASoC: SOF: Intel: Retry codec probing if it fails
by Kai Vehmanen 01 Dec '21

01 Dec '21

From: Hui Wang <hui.wang(a)canonical.com> On the latest Lenovo Thinkstation laptops, we often experience the speaker failure after rebooting, check the dmesg, we could see: sof-audio-pci-intel-tgl 0000:00:1f.3: codec #0 probe error, ret: -5 The analogue codec on the machine is ALC287, then we designed a testcase to reboot and check the codec probing result repeatedly, we found the analogue codec probing always failed at least once within several minutes to several hours (roughly 1 reboot per min). This issue happens on all laptops of this Thinkstation model, but with legacy HDA driver, we couldn't reproduce this issue on those laptops. And so far, this issue is not reproduced on machines which don't belong to this model. We tried to make the hda_dsp_ctrl_init_chip() same as hda_intel_init_chip() which is the controller init routine in the legacy HDA driver, but it didn't help. We found when issue happens, the resp is -1, and if we let driver re-run send_cmd() and get_response(), it will get the correct response 10ec0287, then driver continues the rest work, finally boot to the desktop and all audio function work well. Here adding codec probing retries to 3 times, it could fix the issue on this Thinkstation model, and it doesn't bring impact to other machines. Reviewed-by: Bard Liao <bard.liao(a)intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Signed-off-by: Hui Wang <hui.wang(a)canonical.com> Signed-off-by: Kai Vehmanen <kai.vehmanen(a)linux.intel.com> --- sound/soc/sof/intel/hda-codec.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) Notes: - patch for-5.16 on top of for-5.16 8a724d5f60 diff --git a/sound/soc/sof/intel/hda-codec.c b/sound/soc/sof/intel/hda-codec.c index 6744318de612..13cd96e6724a 100644 --- a/sound/soc/sof/intel/hda-codec.c +++ b/sound/soc/sof/intel/hda-codec.c @@ -22,6 +22,7 @@ #if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA_AUDIO_CODEC) #define IDISP_VID_INTEL 0x80860000 +#define CODEC_PROBE_RETRIES 3 /* load the legacy HDA codec driver */ static int request_codec_module(struct hda_codec *codec) @@ -121,12 +122,15 @@ static int hda_codec_probe(struct snd_sof_dev *sdev, int address, u32 hda_cmd = (address << 28) | (AC_NODE_ROOT << 20) | (AC_VERB_PARAMETERS << 8) | AC_PAR_VENDOR_ID; u32 resp = -1; - int ret; + int ret, retry = 0; + + do { + mutex_lock(&hbus->core.cmd_mutex); + snd_hdac_bus_send_cmd(&hbus->core, hda_cmd); + snd_hdac_bus_get_response(&hbus->core, address, &resp); + mutex_unlock(&hbus->core.cmd_mutex); + } while (resp == -1 && retry++ < CODEC_PROBE_RETRIES); - mutex_lock(&hbus->core.cmd_mutex); - snd_hdac_bus_send_cmd(&hbus->core, hda_cmd); - snd_hdac_bus_get_response(&hbus->core, address, &resp); - mutex_unlock(&hbus->core.cmd_mutex); if (resp == -1) return -EIO; dev_dbg(sdev->dev, "HDA codec #%d probed OK: response: %x\n", base-commit: 8a724d5f60904084e09de2685ff9e77bc8a40815 -- 2.34.1

2 1

[PATCH v3] ASoC: rockchip: i2s_tdm: Dup static DAI template
by Nicolas Frattaroli 01 Dec '21

01 Dec '21

Previously, the DAI template was used directly, which lead to fun bugs such as "why is my channels_max changing?" when one instantiated more than one i2s_tdm IP block in a device tree. This change makes it so that we instead duplicate the template struct, and then use that. Fixes: 081068fd6414 ("ASoC: rockchip: add support for i2s-tdm controller") Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas(a)gmail.com> --- Changes in v3: - constify the i2s_tdm_dai struct - remove remaining direct i2s_tdm_dai uses - move symmetric_rate setting to _init_dai - store pointer to dai struct in rk_i2s_tdm_dev struct Changes in v2: - remove accidental whitespace changes sound/soc/rockchip/rockchip_i2s_tdm.c | 52 ++++++++++++++++----------- 1 file changed, 31 insertions(+), 21 deletions(-) diff --git a/sound/soc/rockchip/rockchip_i2s_tdm.c b/sound/soc/rockchip/rockchip_i2s_tdm.c index 17b9b287853a..5f9cb5c4c7f0 100644 --- a/sound/soc/rockchip/rockchip_i2s_tdm.c +++ b/sound/soc/rockchip/rockchip_i2s_tdm.c @@ -95,6 +95,7 @@ struct rk_i2s_tdm_dev { spinlock_t lock; /* xfer lock */ bool has_playback; bool has_capture; + struct snd_soc_dai_driver *dai; }; static int to_ch_num(unsigned int val) @@ -1310,19 +1311,14 @@ static const struct of_device_id rockchip_i2s_tdm_match[] = { {}, }; -static struct snd_soc_dai_driver i2s_tdm_dai = { +static const struct snd_soc_dai_driver i2s_tdm_dai = { .probe = rockchip_i2s_tdm_dai_probe, - .playback = { - .stream_name = "Playback", - }, - .capture = { - .stream_name = "Capture", - }, .ops = &rockchip_i2s_tdm_dai_ops, }; -static void rockchip_i2s_tdm_init_dai(struct rk_i2s_tdm_dev *i2s_tdm) +static int rockchip_i2s_tdm_init_dai(struct rk_i2s_tdm_dev *i2s_tdm) { + struct snd_soc_dai_driver *dai; struct property *dma_names; const char *dma_name; u64 formats = (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE | @@ -1337,19 +1333,33 @@ static void rockchip_i2s_tdm_init_dai(struct rk_i2s_tdm_dev *i2s_tdm) i2s_tdm->has_capture = true; } + dai = devm_kmemdup(i2s_tdm->dev, &i2s_tdm_dai, + sizeof(*dai), GFP_KERNEL); + if (!dai) + return -ENOMEM; + if (i2s_tdm->has_playback) { - i2s_tdm_dai.playback.channels_min = 2; - i2s_tdm_dai.playback.channels_max = 8; - i2s_tdm_dai.playback.rates = SNDRV_PCM_RATE_8000_192000; - i2s_tdm_dai.playback.formats = formats; + dai->playback.stream_name = "Playback"; + dai->playback.channels_min = 2; + dai->playback.channels_max = 8; + dai->playback.rates = SNDRV_PCM_RATE_8000_192000; + dai->playback.formats = formats; } if (i2s_tdm->has_capture) { - i2s_tdm_dai.capture.channels_min = 2; - i2s_tdm_dai.capture.channels_max = 8; - i2s_tdm_dai.capture.rates = SNDRV_PCM_RATE_8000_192000; - i2s_tdm_dai.capture.formats = formats; + dai->capture.stream_name = "Capture"; + dai->capture.channels_min = 2; + dai->capture.channels_max = 8; + dai->capture.rates = SNDRV_PCM_RATE_8000_192000; + dai->capture.formats = formats; } + + if (i2s_tdm->clk_trcm != TRCM_TXRX) + dai->symmetric_rate = 1; + + i2s_tdm->dai = dai; + + return 0; } static int rockchip_i2s_tdm_path_check(struct rk_i2s_tdm_dev *i2s_tdm, @@ -1541,8 +1551,6 @@ static int rockchip_i2s_tdm_probe(struct platform_device *pdev) spin_lock_init(&i2s_tdm->lock); i2s_tdm->soc_data = (struct rk_i2s_soc_data *)of_id->data; - rockchip_i2s_tdm_init_dai(i2s_tdm); - i2s_tdm->frame_width = 64; i2s_tdm->clk_trcm = TRCM_TXRX; @@ -1555,8 +1563,10 @@ static int rockchip_i2s_tdm_probe(struct platform_device *pdev) } i2s_tdm->clk_trcm = TRCM_RX; } - if (i2s_tdm->clk_trcm != TRCM_TXRX) - i2s_tdm_dai.symmetric_rate = 1; + + ret = rockchip_i2s_tdm_init_dai(i2s_tdm); + if (ret) + return ret; i2s_tdm->grf = syscon_regmap_lookup_by_phandle(node, "rockchip,grf"); if (IS_ERR(i2s_tdm->grf)) @@ -1678,7 +1688,7 @@ static int rockchip_i2s_tdm_probe(struct platform_device *pdev) ret = devm_snd_soc_register_component(&pdev->dev, &rockchip_i2s_tdm_component, - &i2s_tdm_dai, 1); + i2s_tdm->dai, 1); if (ret) { dev_err(&pdev->dev, "Could not register DAI\n"); -- 2.34.0

2 1

[PATCH] ASoC: rockchip: i2s_tdm: Dup static DAI template
by Nicolas Frattaroli 01 Dec '21

01 Dec '21

Previously, the DAI template was used directly, which lead to fun bugs such as "why is my channels_max changing?" when one instantiated more than one i2s_tdm IP block in a device tree. This change makes it so that we instead duplicate the template struct, and then use that. Fixes: 081068fd6414 ("ASoC: rockchip: add support for i2s-tdm controller") Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas(a)gmail.com> --- sound/soc/rockchip/rockchip_i2s_tdm.c | 42 +++++++++++++++------------ 1 file changed, 24 insertions(+), 18 deletions(-) diff --git a/sound/soc/rockchip/rockchip_i2s_tdm.c b/sound/soc/rockchip/rockchip_i2s_tdm.c index 17b9b287853a..e9ddbbf4563e 100644 --- a/sound/soc/rockchip/rockchip_i2s_tdm.c +++ b/sound/soc/rockchip/rockchip_i2s_tdm.c @@ -1312,22 +1312,17 @@ static const struct of_device_id rockchip_i2s_tdm_match[] = { static struct snd_soc_dai_driver i2s_tdm_dai = { .probe = rockchip_i2s_tdm_dai_probe, - .playback = { - .stream_name = "Playback", - }, - .capture = { - .stream_name = "Capture", - }, .ops = &rockchip_i2s_tdm_dai_ops, }; -static void rockchip_i2s_tdm_init_dai(struct rk_i2s_tdm_dev *i2s_tdm) +static int rockchip_i2s_tdm_init_dai(struct rk_i2s_tdm_dev *i2s_tdm) { + struct snd_soc_dai_driver *dai; struct property *dma_names; const char *dma_name; u64 formats = (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE | - SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_LE | - SNDRV_PCM_FMTBIT_S32_LE); + SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_LE | + SNDRV_PCM_FMTBIT_S32_LE); struct device_node *node = i2s_tdm->dev->of_node; of_property_for_each_string(node, "dma-names", dma_names, dma_name) { @@ -1337,19 +1332,28 @@ static void rockchip_i2s_tdm_init_dai(struct rk_i2s_tdm_dev *i2s_tdm) i2s_tdm->has_capture = true; } + dai = devm_kmemdup(i2s_tdm->dev, &i2s_tdm_dai, + sizeof(*dai), GFP_KERNEL); + if (!dai) + return -ENOMEM; + if (i2s_tdm->has_playback) { - i2s_tdm_dai.playback.channels_min = 2; - i2s_tdm_dai.playback.channels_max = 8; - i2s_tdm_dai.playback.rates = SNDRV_PCM_RATE_8000_192000; - i2s_tdm_dai.playback.formats = formats; + dai->playback.stream_name = "Playback"; + dai->playback.channels_min = 2; + dai->playback.channels_max = 8; + dai->playback.rates = SNDRV_PCM_RATE_8000_192000; + dai->playback.formats = formats; } if (i2s_tdm->has_capture) { - i2s_tdm_dai.capture.channels_min = 2; - i2s_tdm_dai.capture.channels_max = 8; - i2s_tdm_dai.capture.rates = SNDRV_PCM_RATE_8000_192000; - i2s_tdm_dai.capture.formats = formats; + dai->capture.stream_name = "Capture"; + dai->capture.channels_min = 2; + dai->capture.channels_max = 8; + dai->capture.rates = SNDRV_PCM_RATE_8000_192000; + dai->capture.formats = formats; } + + return 0; } static int rockchip_i2s_tdm_path_check(struct rk_i2s_tdm_dev *i2s_tdm, @@ -1541,7 +1545,9 @@ static int rockchip_i2s_tdm_probe(struct platform_device *pdev) spin_lock_init(&i2s_tdm->lock); i2s_tdm->soc_data = (struct rk_i2s_soc_data *)of_id->data; - rockchip_i2s_tdm_init_dai(i2s_tdm); + ret = rockchip_i2s_tdm_init_dai(i2s_tdm); + if (ret) + return ret; i2s_tdm->frame_width = 64; -- 2.34.0

2 1

What is "DMAR: PTE Read access is not set"?
by Mark Hills 01 Dec '21

01 Dec '21

Recently, seeing from the kernel when my audio device (Layla3G, PCI) is open: [ 2333.598177] DMAR: [DMA Read NO_PASID] Request device [0a:00.0] fault addr 0xfffe0000 [fault reason 0x06] PTE Read access is not set [ 2333.768836] DMAR: DRHD: handling fault status reg 3 [ 2338.376854] dmar_fault: 80 callbacks suppressed I'm not really sure where to begin here; does it mean that snd-echo3g should be making some up-front declaration of how it uses some DMA area? Seems to have appeared in the 5.14.x series (currently 5.14.16) but also I did a BIOS update in that time for another issue. 5.15.6 (latest stable) is also still affected. Audio plays fine; but my logs are full of these excess messages. -- Mark

1 0

[PATCH v3 0/5] Add pin control support for lpass sc7280
by Srinivasa Rao Mandadapu 01 Dec '21

01 Dec '21

This patch series is to split lpass variant common pin control functions and SoC specific functions and to add lpass sc7280 pincontrol support. It also Adds dt-bindings for lpass sc7280 lpass lpi pincontrol. Changes Since V2: -- Add new dt-bindings for sc7280 lpi driver. -- Make clock voting change as separate patch. -- Split existing pincontrol driver and make common functions as part of separate file. -- Rename lpass pincontrol lpi dt-bindings to sm8250 specific dt-bindings Changes Since V1: -- Make lpi pinctrl variant data structure as constant -- Add appropriate commit message -- Change signedoff by sequence. Srinivasa Rao Mandadapu (5): dt-bindings: pinctrl: qcom: Update lpass lpi file name to SoC specific dt-bindings: pinctrl: qcom: Add sc7280 lpass lpi pinctrl bindings pinctrl: qcom: Move chip specific functions to right files pinctrl: qcom: Update clock voting as optional pinctrl: qcom: Add SC7280 lpass pin configuration .../bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml | 130 ----------- .../pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml | 115 ++++++++++ .../pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml | 130 +++++++++++ drivers/pinctrl/qcom/Makefile | 2 + drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 253 +-------------------- drivers/pinctrl/qcom/pinctrl-lpass-lpi.h | 140 ++++++++++++ drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c | 127 +++++++++++ drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c | 125 ++++++++++ 8 files changed, 646 insertions(+), 376 deletions(-) delete mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml create mode 100644 drivers/pinctrl/qcom/pinctrl-lpass-lpi.h create mode 100644 drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c create mode 100644 drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c -- Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc., is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.

3 12

[PATCH v6 1/2] dt-bindings: sound: tlv320adc3xxx: New codec driver
by Ricard Wanderlof 01 Dec '21

01 Dec '21

DT bindings for tlv320adc3xxx driver, currently supporting Texas Instruments TLV320ADC3001 and TLV320ADC3101 audio ADCs. Signed-off-by: Ricard Wanderlof <ricardw(a)axis.com> --- .../bindings/sound/ti,tlv320adc3xxx.yaml | 137 ++++++++++++++++++ include/dt-bindings/sound/tlv320adc3xxx.h | 28 ++++ 2 files changed, 165 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml create mode 100644 include/dt-bindings/sound/tlv320adc3xxx.h diff --git a/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml b/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml new file mode 100644 index 000000000000..c4fed6335230 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml @@ -0,0 +1,137 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/ti,tlv320adc3xxx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TLV320ADC3001/TLV320ADC3101 Stereo ADC + +maintainers: + - Ricard Wanderlof <ricardw(a)axis.com> + +description: | + Texas Instruments TLV320ADC3001 and TLV320ADC3101 Stereo ADC + https://www.ti.com/product/TLV320ADC3001 + https://www.ti.com/product/TLV320ADC3101 + +properties: + compatible: + enum: + - ti,tlv320adc3001 + - ti,tlv320adc3101 + + reg: + maxItems: 1 + description: I2C address + + '#sound-dai-cells': + const: 0 + + '#gpio-cells': + const: 2 + + gpio-controller: true + + reset-gpios: + maxItems: 1 + description: GPIO pin used for codec reset (RESET pin) + + clocks: + maxItems: 1 + description: Master clock (MCLK) + + ti,dmdin-gpio1: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # ADC3XXX_GPIO_DISABLED - I/O buffers powered down and not used + - 1 # ADC3XXX_GPIO_INPUT - Various non-GPIO input functions + - 2 # ADC3XXX_GPIO_GPI - General purpose input + - 3 # ADC3XXX_GPIO_GPO - General purpose output + - 4 # ADC3XXX_GPIO_CLKOUT - Clock source set in CLKOUT_MUX reg + - 5 # ADC3XXX_GPIO_INT1 - INT1 output + - 6 # ADC3XXX_GPIO_SECONDARY_BCLK - Codec interface secondary BCLK + - 7 # ADC3XXX_GPIO_SECONDARY_WCLK - Codec interface secondary WCLK + default: 0 + description: | + Configuration for DMDIN/GPIO1 pin. + + When ADC3XXX_GPIO_GPO is configured, this causes corresponding the + ALSA control "GPIOx Output" to appear, as a switch control. + + ti,dmclk-gpio2: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # ADC3XXX_GPIO_DISABLED - I/O buffers powered down and not used + - 1 # ADC3XXX_GPIO_INPUT - Various non-GPIO input functions + - 2 # ADC3XXX_GPIO_GPI - General purpose input + - 3 # ADC3XXX_GPIO_GPO - General purpose output + - 4 # ADC3XXX_GPIO_CLKOUT - Clock source set in CLKOUT_MUX reg + - 5 # ADC3XXX_GPIO_INT1 - INT1 output + - 6 # ADC3XXX_GPIO_SECONDARY_BCLK - Codec interface secondary BCLK + - 7 # ADC3XXX_GPIO_SECONDARY_WCLK - Codec interface secondary WCLK + default: 0 + description: | + Configuration for DMCLK/GPIO2 pin. + + When ADC3XXX_GPIO_GPO is configured, this causes corresponding the + ALSA control "GPIOx Output" to appear, as a switch control. + + Note that there is currently no support for reading the GPIO pins as + inputs. + + ti,micbias1-vg: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # ADC3XXX_MICBIAS_OFF - Mic bias is powered down + - 1 # ADC3XXX_MICBIAS_2_0V - Mic bias is set to 2.0V + - 2 # ADC3XXX_MICBIAS_2_5V - Mic bias is set to 2.5V + - 3 # ADC3XXX_MICBIAS_AVDD - Mic bias is same as AVDD supply + default: 0 + description: | + Mic bias voltage output on MICBIAS1 pin + + ti,micbias2-vg: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # ADC3XXX_MICBIAS_OFF - Mic bias is powered down + - 1 # ADC3XXX_MICBIAS_2_0V - Mic bias is set to 2.0V + - 2 # ADC3XXX_MICBIAS_2_5V - Mic bias is set to 2.5V + - 3 # ADC3XXX_MICBIAS_AVDD - Mic bias is same as AVDD supply + default: 0 + description: | + Mic bias voltage output on MICBIAS2 pin + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/sound/tlv320adc3xxx.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + tlv320adc3101: tlv320adc3101@18 { + compatible = "ti,tlv320adc3101"; + reg = <0x18>; + reset-gpios = <&gpio_pc 3 GPIO_ACTIVE_LOW>; + clocks = <&audio_mclk>; + gpio-controller; + #gpio-cells = <2>; + ti,dmdin-gpio1 = <ADC3XXX_GPIO_GPO>; + ti,micbias1-vg = <ADC3XXX_MICBIAS_AVDD>; + }; + }; + + audio_mclk: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; +... diff --git a/include/dt-bindings/sound/tlv320adc3xxx.h b/include/dt-bindings/sound/tlv320adc3xxx.h new file mode 100644 index 000000000000..3b3fa43fa961 --- /dev/null +++ b/include/dt-bindings/sound/tlv320adc3xxx.h @@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Devicetree bindings definitions for tlv320adc3xxx driver. + * + * Copyright (C) 2021 Axis Communications AB + */ +#ifndef __DT_TLV320ADC3XXX_H +#define __DT_TLV320ADC3XXX_H + +#define ADC3XXX_GPIO_DISABLED 0 /* I/O buffers powered down */ +#define ADC3XXX_GPIO_INPUT 1 /* Various non-GPIO inputs */ +#define ADC3XXX_GPIO_GPI 2 /* General purpose input */ +#define ADC3XXX_GPIO_GPO 3 /* General purpose output */ +#define ADC3XXX_GPIO_CLKOUT 4 /* Source set in reg. CLKOUT_MUX */ +#define ADC3XXX_GPIO_INT1 5 /* INT1 output */ +#define ADC3XXX_GPIO_INT2 6 /* INT2 output */ +/* value 7 is reserved */ +#define ADC3XXX_GPIO_SECONDARY_BCLK 8 /* Codec interface secondary BCLK */ +#define ADC3XXX_GPIO_SECONDARY_WCLK 9 /* Codec interface secondary WCLK */ +#define ADC3XXX_GPIO_ADC_MOD_CLK 10 /* Clock output for digital mics */ +/* values 11-15 reserved */ + +#define ADC3XXX_MICBIAS_OFF 0 /* Micbias pin powered off */ +#define ADC3XXX_MICBIAS_2_0V 1 /* Micbias pin set to 2.0V */ +#define ADC3XXX_MICBIAS_2_5V 2 /* Micbias pin set to 2.5V */ +#define ADC3XXX_MICBIAS_AVDD 3 /* Use AVDD voltage for micbias pin */ + +#endif /* __DT_TLV320ADC3XXX_H */ -- 2.20.1 -- Ricard Wolf Wanderlof ricardw(at)axis.com Axis Communications AB, Lund, Sweden www.axis.com Phone +46 46 272 2016 Fax +46 46 13 61 30

2 2

[PATCH v6 0/2] Codec driver for TLV320ADC3001 and 3101
by Ricard Wanderlof 01 Dec '21

01 Dec '21

I've submitted this a couple of times, but the kernel test robot has come back with various remarks, so I've reworked it a bit more hopefully with positive results this time. This is a codec driver for the TLV320ADC3001 and TLV320ADC3101 2 channel audio ADC chips from Texas Instruments. Based on an old driver for these chips that I was referred to by Texas Instruments, but which apparently was never upstreamed, I've taken patches from various incarnations, ported them and augmented them with various new features in order to make a working driver. There is currently no support for the on-chip "miniDSP". Although the TLV320ADC3001 and TLV320ADC3101 have similarities with other TI codec chips for which there are existing drivers, upon closer inspection I decided the differences were too great to warrant attempting to modify an existing driver, especially without access to all supported chips and resources for testing them all. There are certainly things that could be improved, among others in the area of PLL register value calculations, but it has been tested on the Axis ARTPEC-8 platform and has been found to work satisfactorily at least with a TLV320ADC3101 operating as an I2S slave at 48 kHz with 32 bit bit depth, 1 or 2 channels, both with the on-chip PLL enabled and disabled. I have not tested this on a TLV320ADC3001 chip; in the original driver the only differences were related to the now-removed initialization code, so I've just retained the compatible strings for both chips. Limitations: - GPIO pins on chip can only be set up as outputs. - Using BCLK as an input to clock chain is supported by the hw but not by driver. Changes v5->v6: - Added missing "depends on I2C" in the Kconfig (reported by lkp(a)intel.com). - Fold include file into source as it is not needed elsewhere. - Fix SPDX-License-Identifier which was using a deprecated license. - Clean up authorship information in file header, removing history. - Remove useless GPIOLIB ifdefs. - Use devm_gpiod_get for reset gpio rather than devm_gpio_request etc. - Handle EPROBE_DEFER properly for reset gpio request. - Use dev_err_probe rather than explicit EPROBE_DEFER checking. - Properly check value from DT parsing for mic bias and codec gpio pins. No changes to the devicetree bindings. Changes v4->v5: Yet another fix based on kernel test robot (lkp(a)intel.com), this time a legitimate issue: the return value from of_get_named_gpio_flags() was crammed into an unsigned int so any potential negative error codes were lost. No changes to the devicetree bindings. Changes v3->v4: More fixes reported by kernel test robot (lkp(a)intel.com). Don't know why these weren't reported the first time. Changes v2->v3: Fix a couple of issues reported by the kernel test robot (lkp(a)intel.com). Changes v1->v2: Large portions of the driver have been reworked from v1 based on remarks from Mark. More specifically: - Remove an unneeded #ifdef and EXPORT_SYMBOL_GPL. - Add ADC3XXX_ prefix to all macro names to avoid namespace contention. - Clean up certain macro names with mixed lower case - upper case names. - Do away with the D0..D7 macros representing bit values. - Fix general formatting: spaces before and after {, }, replace multi spaces with tabs, maximum 2 blank lines anywhere, and other minor issues. - Page register does not need to be volatile. - Rather than use 0 / -6dB enum for input attenuator, use standard TLV. - The dither offset control contains reserved values so use VALUE_ENUM instead of straight ENUM. - Replace vector of SOC_ENUMs with individual variables. - Fix ALSA control names: - Use Volume at the end of all gain controls, and remove "Gain" where applicable. - Use "Switch" at the end of all switch controls, either adding it or changing "switch" into "Switch" as applicable. - Switches and Volumes related to capture should be set up as such, so add "Capture" to widget names where appropriate. This is mostly important for the PGA Capture and Switch widgets, not just for consistency, but also because amixer simple Switch controls expect different names (cap/nocap instead of on/off) for control values for capture. - Make widget names have capital first letters for all consitutent words. - When resuming, the registers will not have changed, so no need to call snd_soc_component_cache_sync(). - Move reset gpio init to I2C probe - Remove needless _priv at end of private struct name. - Make hex constants lower case - _CBM_CFM/_CBS_CFS -> _CBP_CFP/_CBC_CFC - Instead of using device specific ALSA controls to control the two GPIO pins, use GPIOLIB. GPIO pin functions still can be set up in the devicetree as the pins can be used for other functions which are not GPIO related. - Limitation: The GPIO pins can only be used as outputs, even though the hardware alternatively supports using them as inputs. - Handle GPIO configs in a vector rather than separately. - Use more appropriate module_i2c_driver instead of generic module_init/module_exit. - Remove useless initialization data. - As the ADC mute function had no control, add it. - Clean up GPIO initialization which was done both in the I2C probe and in the component probe. - Remove probe, remove, suspend and resume callbacks, which either do not do anything at all anymore, or uselessly just do set_bias_level. - The PLL should not be configured in the devicetree, so move the corresponding definitions to tlv320adc3xxx.h where they can be picked up by a machine driver if needed. - Default to PLL AUTO mode. - Use "reset-gpios" instead of too-generic "gpios" for dt property for configuring codec reset pin. - Use function for printing PLL mode rather than macro. - dev_info is too verbose for most of the printouts, change them to dev_dbg. - Add support for configuring micbias voltage in DT. - Remove ALSA control for mic bias. - Move PLL and NADC, MADC divisor enable to DAPM, including 10 ms post PLL start up delay via POST_PMU event. - ADC is powered on using DAPM, so needless to do it in set_bias_level, thus remove it. - Let DAPM handle BCLK divisor enable. With this, we can remove set_bias_level as it doesn't do anything anymore. - Fix incorrect argument order to a snd_soc_component_update_bits call. - Although the chip itself can operate using BCLK as the clock source, either directly to the divider chain or via the PLL, this is not yet supported in the driver, so require the clocks property for the MCLK for now. - Move PLL rate structure out of .h file where it does not belong. /Ricard Ricard Wanderlof (2): dt-bindings: sound: tlv320adc3xxx: New codec driver ASoC: codec: tlv320adc3xxx: New codec driver .../bindings/sound/ti,tlv320adc3xxx.yaml | 137 ++ include/dt-bindings/sound/tlv320adc3xxx.h | 28 + sound/soc/codecs/Kconfig | 8 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/tlv320adc3xxx.c | 1311 +++++++++++++++++ 5 files changed, 1486 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml create mode 100644 include/dt-bindings/sound/tlv320adc3xxx.h create mode 100644 sound/soc/codecs/tlv320adc3xxx.c -- 2.20.1 -- Ricard Wolf Wanderlof ricardw(at)axis.com Axis Communications AB, Lund, Sweden www.axis.com Phone +46 46 272 2016 Fax +46 46 13 61 30

2 2

[PATCH v6 2/2] ASoC: codec: tlv320adc3xxx: New codec driver
by Ricard Wanderlof 01 Dec '21

01 Dec '21

New codec driver for Texas Instruments TLV320ADC3001 and TLV320ADC3101 audio ADCs. Signed-off-by: Ricard Wanderlof <ricardw(a)axis.com> --- sound/soc/codecs/Kconfig | 8 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/tlv320adc3xxx.c | 1311 ++++++++++++++++++++++++++++++ 3 files changed, 1321 insertions(+) create mode 100644 sound/soc/codecs/tlv320adc3xxx.c diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index b4f70e27342c..d638113c5988 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -220,6 +220,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_TDA7419 imply SND_SOC_TFA9879 imply SND_SOC_TFA989X + imply SND_SOC_TLV320ADC3XXX imply SND_SOC_TLV320ADCX140 imply SND_SOC_TLV320AIC23_I2C imply SND_SOC_TLV320AIC23_SPI @@ -1494,6 +1495,13 @@ config SND_SOC_TFA989X Note that the driver currently bypasses the built-in "CoolFlux DSP" and does not support (hardware) volume control. +config SND_SOC_TLV320ADC3XXX + tristate "Texas Instruments TLV320ADC3001/3101 audio ADC" + depends on I2C + help + Enable support for Texas Instruments TLV320ADC3001 and TLV320ADC3101 + ADCs. + config SND_SOC_TLV320AIC23 tristate diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 485eee75502b..24bc6b34ba2f 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -239,6 +239,7 @@ snd-soc-tda7419-objs := tda7419.o snd-soc-tas2770-objs := tas2770.o snd-soc-tfa9879-objs := tfa9879.o snd-soc-tfa989x-objs := tfa989x.o +snd-soc-tlv320adc3xxx-objs := tlv320adc3xxx.o snd-soc-tlv320aic23-objs := tlv320aic23.o snd-soc-tlv320aic23-i2c-objs := tlv320aic23-i2c.o snd-soc-tlv320aic23-spi-objs := tlv320aic23-spi.o @@ -574,6 +575,7 @@ obj-$(CONFIG_SND_SOC_TDA7419) += snd-soc-tda7419.o obj-$(CONFIG_SND_SOC_TAS2770) += snd-soc-tas2770.o obj-$(CONFIG_SND_SOC_TFA9879) += snd-soc-tfa9879.o obj-$(CONFIG_SND_SOC_TFA989X) += snd-soc-tfa989x.o +obj-$(CONFIG_SND_SOC_TLV320ADC3XXX) += snd-soc-tlv320adc3xxx.o obj-$(CONFIG_SND_SOC_TLV320AIC23) += snd-soc-tlv320aic23.o obj-$(CONFIG_SND_SOC_TLV320AIC23_I2C) += snd-soc-tlv320aic23-i2c.o obj-$(CONFIG_SND_SOC_TLV320AIC23_SPI) += snd-soc-tlv320aic23-spi.o diff --git a/sound/soc/codecs/tlv320adc3xxx.c b/sound/soc/codecs/tlv320adc3xxx.c new file mode 100644 index 000000000000..fc4b75e0d944 --- /dev/null +++ b/sound/soc/codecs/tlv320adc3xxx.c @@ -0,0 +1,1311 @@ +// SPDX-License-Identifier: GPL-2.0-only +// +// Based on sound/soc/codecs/tlv320aic3x.c by Vladimir Barinov +// +// Copyright (C) 2010 Mistral Solutions Pvt Ltd. +// Author: Shahina Shaik <shahina.s(a)mistralsolutions.com> +// +// Copyright (C) 2014-2018, Ambarella, Inc. +// Author: Dongge wu <dgwu(a)ambarella.com> +// +// Copyright (C) 2021 Axis Communications AB +// Author: Ricard Wanderlof <ricardw(a)axis.com> +// + +#include <dt-bindings/sound/tlv320adc3xxx.h> +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/io.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/gpio/driver.h> +#include <linux/pm.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/cdev.h> +#include <linux/of_gpio.h> +#include <linux/slab.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/tlv.h> +#include <sound/initval.h> + +/* + * General definitions defining exported functionality. + */ + +#define ADC3XXX_MICBIAS_PINS 2 + +/* Number of GPIO pins exposed via the gpiolib interface */ +#define ADC3XXX_GPIOS_MAX 2 + +#define ADC3XXX_RATES SNDRV_PCM_RATE_8000_96000 +#define ADC3XXX_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S20_3LE | \ + SNDRV_PCM_FMTBIT_S24_3LE | \ + SNDRV_PCM_FMTBIT_S32_LE) + +/* + * PLL modes, to be used for clk_id for set_sysclk callback. + * + * The default behavior (AUTO) is to take the first matching entry in the clock + * table, which is intended to be the PLL based one if there is more than one. + * + * Setting the clock source using simple-card (clocks or + * system-clock-frequency property) sets clk_id = 0 = ADC3XXX_PLL_AUTO. + */ +#define ADC3XXX_PLL_AUTO 0 /* Use first available mode */ +#define ADC3XXX_PLL_ENABLE 1 /* Use PLL for clock generation */ +#define ADC3XXX_PLL_BYPASS 2 /* Don't use PLL for clock generation */ + +/* Register definitions. */ + +#define ADC3XXX_PAGE_SIZE 128 +#define ADC3XXX_REG(page, reg) ((page * ADC3XXX_PAGE_SIZE) + reg) + +/* + * Page 0 registers. + */ + +#define ADC3XXX_PAGE_SELECT ADC3XXX_REG(0, 0) +#define ADC3XXX_RESET ADC3XXX_REG(0, 1) + +/* 2-3 Reserved */ + +#define ADC3XXX_CLKGEN_MUX ADC3XXX_REG(0, 4) +#define ADC3XXX_PLL_PROG_PR ADC3XXX_REG(0, 5) +#define ADC3XXX_PLL_PROG_J ADC3XXX_REG(0, 6) +#define ADC3XXX_PLL_PROG_D_MSB ADC3XXX_REG(0, 7) +#define ADC3XXX_PLL_PROG_D_LSB ADC3XXX_REG(0, 8) + +/* 9-17 Reserved */ + +#define ADC3XXX_ADC_NADC ADC3XXX_REG(0, 18) +#define ADC3XXX_ADC_MADC ADC3XXX_REG(0, 19) +#define ADC3XXX_ADC_AOSR ADC3XXX_REG(0, 20) +#define ADC3XXX_ADC_IADC ADC3XXX_REG(0, 21) + +/* 23-24 Reserved */ + +#define ADC3XXX_CLKOUT_MUX ADC3XXX_REG(0, 25) +#define ADC3XXX_CLKOUT_M_DIV ADC3XXX_REG(0, 26) +#define ADC3XXX_INTERFACE_CTRL_1 ADC3XXX_REG(0, 27) +#define ADC3XXX_CH_OFFSET_1 ADC3XXX_REG(0, 28) +#define ADC3XXX_INTERFACE_CTRL_2 ADC3XXX_REG(0, 29) +#define ADC3XXX_BCLK_N_DIV ADC3XXX_REG(0, 30) +#define ADC3XXX_INTERFACE_CTRL_3 ADC3XXX_REG(0, 31) +#define ADC3XXX_INTERFACE_CTRL_4 ADC3XXX_REG(0, 32) +#define ADC3XXX_INTERFACE_CTRL_5 ADC3XXX_REG(0, 33) +#define ADC3XXX_I2S_SYNC ADC3XXX_REG(0, 34) +/* 35 Reserved */ +#define ADC3XXX_ADC_FLAG ADC3XXX_REG(0, 36) +#define ADC3XXX_CH_OFFSET_2 ADC3XXX_REG(0, 37) +#define ADC3XXX_I2S_TDM_CTRL ADC3XXX_REG(0, 38) +/* 39-41 Reserved */ +#define ADC3XXX_INTR_FLAG_1 ADC3XXX_REG(0, 42) +#define ADC3XXX_INTR_FLAG_2 ADC3XXX_REG(0, 43) +/* 44 Reserved */ +#define ADC3XXX_INTR_FLAG_ADC1 ADC3XXX_REG(0, 45) +/* 46 Reserved */ +#define ADC3XXX_INTR_FLAG_ADC2 ADC3XXX_REG(0, 47) +#define ADC3XXX_INT1_CTRL ADC3XXX_REG(0, 48) +#define ADC3XXX_INT2_CTRL ADC3XXX_REG(0, 49) +/* 50 Reserved */ +#define ADC3XXX_GPIO2_CTRL ADC3XXX_REG(0, 51) +#define ADC3XXX_GPIO1_CTRL ADC3XXX_REG(0, 52) +#define ADC3XXX_DOUT_CTRL ADC3XXX_REG(0, 53) +/* 54-56 Reserved */ +#define ADC3XXX_SYNC_CTRL_1 ADC3XXX_REG(0, 57) +#define ADC3XXX_SYNC_CTRL_2 ADC3XXX_REG(0, 58) +#define ADC3XXX_CIC_GAIN_CTRL ADC3XXX_REG(0, 59) +/* 60 Reserved */ +#define ADC3XXX_PRB_SELECT ADC3XXX_REG(0, 61) +#define ADC3XXX_INST_MODE_CTRL ADC3XXX_REG(0, 62) +/* 63-79 Reserved */ +#define ADC3XXX_MIC_POLARITY_CTRL ADC3XXX_REG(0, 80) +#define ADC3XXX_ADC_DIGITAL ADC3XXX_REG(0, 81) +#define ADC3XXX_ADC_FGA ADC3XXX_REG(0, 82) +#define ADC3XXX_LADC_VOL ADC3XXX_REG(0, 83) +#define ADC3XXX_RADC_VOL ADC3XXX_REG(0, 84) +#define ADC3XXX_ADC_PHASE_COMP ADC3XXX_REG(0, 85) +#define ADC3XXX_LEFT_CHN_AGC_1 ADC3XXX_REG(0, 86) +#define ADC3XXX_LEFT_CHN_AGC_2 ADC3XXX_REG(0, 87) +#define ADC3XXX_LEFT_CHN_AGC_3 ADC3XXX_REG(0, 88) +#define ADC3XXX_LEFT_CHN_AGC_4 ADC3XXX_REG(0, 89) +#define ADC3XXX_LEFT_CHN_AGC_5 ADC3XXX_REG(0, 90) +#define ADC3XXX_LEFT_CHN_AGC_6 ADC3XXX_REG(0, 91) +#define ADC3XXX_LEFT_CHN_AGC_7 ADC3XXX_REG(0, 92) +#define ADC3XXX_LEFT_AGC_GAIN ADC3XXX_REG(0, 93) +#define ADC3XXX_RIGHT_CHN_AGC_1 ADC3XXX_REG(0, 94) +#define ADC3XXX_RIGHT_CHN_AGC_2 ADC3XXX_REG(0, 95) +#define ADC3XXX_RIGHT_CHN_AGC_3 ADC3XXX_REG(0, 96) +#define ADC3XXX_RIGHT_CHN_AGC_4 ADC3XXX_REG(0, 97) +#define ADC3XXX_RIGHT_CHN_AGC_5 ADC3XXX_REG(0, 98) +#define ADC3XXX_RIGHT_CHN_AGC_6 ADC3XXX_REG(0, 99) +#define ADC3XXX_RIGHT_CHN_AGC_7 ADC3XXX_REG(0, 100) +#define ADC3XXX_RIGHT_AGC_GAIN ADC3XXX_REG(0, 101) +/* 102-127 Reserved */ + +/* + * Page 1 registers. + */ + +/* 1-25 Reserved */ +#define ADC3XXX_DITHER_CTRL ADC3XXX_REG(1, 26) +/* 27-50 Reserved */ +#define ADC3XXX_MICBIAS_CTRL ADC3XXX_REG(1, 51) +#define ADC3XXX_LEFT_PGA_SEL_1 ADC3XXX_REG(1, 52) +/* 53 Reserved */ +#define ADC3XXX_LEFT_PGA_SEL_2 ADC3XXX_REG(1, 54) +#define ADC3XXX_RIGHT_PGA_SEL_1 ADC3XXX_REG(1, 55) +#define ADC3XXX_RIGHT_PGA_SEL_2 ADC3XXX_REG(1, 57) +#define ADC3XXX_LEFT_APGA_CTRL ADC3XXX_REG(1, 59) +#define ADC3XXX_RIGHT_APGA_CTRL ADC3XXX_REG(1, 60) +#define ADC3XXX_LOW_CURRENT_MODES ADC3XXX_REG(1, 61) +#define ADC3XXX_ANALOG_PGA_FLAGS ADC3XXX_REG(1, 62) +/* 63-127 Reserved */ + +/* + * Register bits. + */ + +/* PLL Enable bits */ +#define ADC3XXX_ENABLE_PLL_SHIFT 7 +#define ADC3XXX_ENABLE_PLL (1 << ADC3XXX_ENABLE_PLL_SHIFT) +#define ADC3XXX_ENABLE_NADC_SHIFT 7 +#define ADC3XXX_ENABLE_NADC (1 << ADC3XXX_ENABLE_NADC_SHIFT) +#define ADC3XXX_ENABLE_MADC_SHIFT 7 +#define ADC3XXX_ENABLE_MADC (1 << ADC3XXX_ENABLE_MADC_SHIFT) +#define ADC3XXX_ENABLE_BCLK_SHIFT 7 +#define ADC3XXX_ENABLE_BCLK (1 << ADC3XXX_ENABLE_BCLK_SHIFT) + +/* Power bits */ +#define ADC3XXX_LADC_PWR_ON 0x80 +#define ADC3XXX_RADC_PWR_ON 0x40 + +#define ADC3XXX_SOFT_RESET 0x01 +#define ADC3XXX_BCLK_MASTER 0x08 +#define ADC3XXX_WCLK_MASTER 0x04 + +/* Interface register masks */ +#define ADC3XXX_FORMAT_MASK 0xc0 +#define ADC3XXX_FORMAT_SHIFT 6 +#define ADC3XXX_WLENGTH_MASK 0x30 +#define ADC3XXX_WLENGTH_SHIFT 4 +#define ADC3XXX_CLKDIR_MASK 0x0c +#define ADC3XXX_CLKDIR_SHIFT 2 + +/* Interface register bit patterns */ +#define ADC3XXX_FORMAT_I2S (0 << ADC3XXX_FORMAT_SHIFT) +#define ADC3XXX_FORMAT_DSP (1 << ADC3XXX_FORMAT_SHIFT) +#define ADC3XXX_FORMAT_RJF (2 << ADC3XXX_FORMAT_SHIFT) +#define ADC3XXX_FORMAT_LJF (3 << ADC3XXX_FORMAT_SHIFT) + +#define ADC3XXX_IFACE_16BITS (0 << ADC3XXX_WLENGTH_SHIFT) +#define ADC3XXX_IFACE_20BITS (1 << ADC3XXX_WLENGTH_SHIFT) +#define ADC3XXX_IFACE_24BITS (2 << ADC3XXX_WLENGTH_SHIFT) +#define ADC3XXX_IFACE_32BITS (3 << ADC3XXX_WLENGTH_SHIFT) + +/* PLL P/R bit offsets */ +#define ADC3XXX_PLLP_SHIFT 4 +#define ADC3XXX_PLLR_SHIFT 0 +#define ADC3XXX_PLL_PR_MASK 0x7f +#define ADC3XXX_PLLJ_MASK 0x3f +#define ADC3XXX_PLLD_MSB_MASK 0x3f +#define ADC3XXX_PLLD_LSB_MASK 0xff +#define ADC3XXX_NADC_MASK 0x7f +#define ADC3XXX_MADC_MASK 0x7f +#define ADC3XXX_AOSR_MASK 0xff +#define ADC3XXX_IADC_MASK 0xff +#define ADC3XXX_BDIV_MASK 0x7f + +/* PLL_CLKIN bits */ +#define ADC3XXX_PLL_CLKIN_SHIFT 2 +#define ADC3XXX_PLL_CLKIN_MCLK 0x0 +#define ADC3XXX_PLL_CLKIN_BCLK 0x1 +#define ADC3XXX_PLL_CLKIN_ZERO 0x3 + +/* CODEC_CLKIN bits */ +#define ADC3XXX_CODEC_CLKIN_SHIFT 0 +#define ADC3XXX_CODEC_CLKIN_MCLK 0x0 +#define ADC3XXX_CODEC_CLKIN_BCLK 0x1 +#define ADC3XXX_CODEC_CLKIN_PLL_CLK 0x3 + +#define ADC3XXX_USE_PLL ((ADC3XXX_PLL_CLKIN_MCLK << ADC3XXX_PLL_CLKIN_SHIFT) | \ + (ADC3XXX_CODEC_CLKIN_PLL_CLK << ADC3XXX_CODEC_CLKIN_SHIFT)) +#define ADC3XXX_NO_PLL ((ADC3XXX_PLL_CLKIN_ZERO << ADC3XXX_PLL_CLKIN_SHIFT) | \ + (ADC3XXX_CODEC_CLKIN_MCLK << ADC3XXX_CODEC_CLKIN_SHIFT)) + +/* Analog PGA control bits */ +#define ADC3XXX_LPGA_MUTE 0x80 +#define ADC3XXX_RPGA_MUTE 0x80 + +#define ADC3XXX_LPGA_GAIN_MASK 0x7f +#define ADC3XXX_RPGA_GAIN_MASK 0x7f + +/* ADC current modes */ +#define ADC3XXX_ADC_LOW_CURR_MODE 0x01 + +/* Left ADC Input selection bits */ +#define ADC3XXX_LCH_SEL1_SHIFT 0 +#define ADC3XXX_LCH_SEL2_SHIFT 2 +#define ADC3XXX_LCH_SEL3_SHIFT 4 +#define ADC3XXX_LCH_SEL4_SHIFT 6 + +#define ADC3XXX_LCH_SEL1X_SHIFT 0 +#define ADC3XXX_LCH_SEL2X_SHIFT 2 +#define ADC3XXX_LCH_SEL3X_SHIFT 4 +#define ADC3XXX_LCH_COMMON_MODE 0x40 +#define ADC3XXX_BYPASS_LPGA 0x80 + +/* Right ADC Input selection bits */ +#define ADC3XXX_RCH_SEL1_SHIFT 0 +#define ADC3XXX_RCH_SEL2_SHIFT 2 +#define ADC3XXX_RCH_SEL3_SHIFT 4 +#define ADC3XXX_RCH_SEL4_SHIFT 6 + +#define ADC3XXX_RCH_SEL1X_SHIFT 0 +#define ADC3XXX_RCH_SEL2X_SHIFT 2 +#define ADC3XXX_RCH_SEL3X_SHIFT 4 +#define ADC3XXX_RCH_COMMON_MODE 0x40 +#define ADC3XXX_BYPASS_RPGA 0x80 + +/* MICBIAS control bits */ +#define ADC3XXX_MICBIAS_MASK 0x2 +#define ADC3XXX_MICBIAS1_SHIFT 5 +#define ADC3XXX_MICBIAS2_SHIFT 3 + +#define ADC3XXX_ADC_MAX_VOLUME 64 +#define ADC3XXX_ADC_POS_VOL 24 + +/* GPIO control bits (GPIO1_CTRL and GPIO2_CTRL) */ +#define ADC3XXX_GPIO_CTRL_CFG_MASK 0x3c +#define ADC3XXX_GPIO_CTRL_CFG_SHIFT 2 +#define ADC3XXX_GPIO_CTRL_OUTPUT_CTRL_MASK 0x01 +#define ADC3XXX_GPIO_CTRL_OUTPUT_CTRL_SHIFT 0 +#define ADC3XXX_GPIO_CTRL_INPUT_VALUE_MASK 0x02 +#define ADC3XXX_GPIO_CTRL_INPUT_VALUE_SHIFT 1 + +enum adc3xxx_type { + ADC3001 = 0, + ADC3101 +}; + +struct adc3xxx { + struct device *dev; + enum adc3xxx_type type; + struct clk *mclk; + struct regmap *regmap; + struct gpio_desc *rst_pin; + unsigned int pll_mode; + unsigned int sysclk; + unsigned int gpio_cfg[ADC3XXX_GPIOS_MAX]; /* value+1 (0 => not set) */ + unsigned int micbias_vg[ADC3XXX_MICBIAS_PINS]; + int master; + u8 page_no; + int use_pll; + struct gpio_chip gpio_chip; +}; + +static const unsigned int adc3xxx_gpio_ctrl_reg[ADC3XXX_GPIOS_MAX] = { + ADC3XXX_GPIO1_CTRL, + ADC3XXX_GPIO2_CTRL +}; + +static const unsigned int adc3xxx_micbias_shift[ADC3XXX_MICBIAS_PINS] = { + ADC3XXX_MICBIAS1_SHIFT, + ADC3XXX_MICBIAS2_SHIFT +}; + +static const struct reg_default adc3xxx_defaults[] = { + /* Page 0 */ + { 0, 0x00 }, { 1, 0x00 }, { 2, 0x00 }, { 3, 0x00 }, + { 4, 0x00 }, { 5, 0x11 }, { 6, 0x04 }, { 7, 0x00 }, + { 8, 0x00 }, { 9, 0x00 }, { 10, 0x00 }, { 11, 0x00 }, + { 12, 0x00 }, { 13, 0x00 }, { 14, 0x00 }, { 15, 0x00 }, + { 16, 0x00 }, { 17, 0x00 }, { 18, 0x01 }, { 19, 0x01 }, + { 20, 0x80 }, { 21, 0x80 }, { 22, 0x04 }, { 23, 0x00 }, + { 24, 0x00 }, { 25, 0x00 }, { 26, 0x01 }, { 27, 0x00 }, + { 28, 0x00 }, { 29, 0x02 }, { 30, 0x01 }, { 31, 0x00 }, + { 32, 0x00 }, { 33, 0x10 }, { 34, 0x00 }, { 35, 0x00 }, + { 36, 0x00 }, { 37, 0x00 }, { 38, 0x02 }, { 39, 0x00 }, + { 40, 0x00 }, { 41, 0x00 }, { 42, 0x00 }, { 43, 0x00 }, + { 44, 0x00 }, { 45, 0x00 }, { 46, 0x00 }, { 47, 0x00 }, + { 48, 0x00 }, { 49, 0x00 }, { 50, 0x00 }, { 51, 0x00 }, + { 52, 0x00 }, { 53, 0x12 }, { 54, 0x00 }, { 55, 0x00 }, + { 56, 0x00 }, { 57, 0x00 }, { 58, 0x00 }, { 59, 0x44 }, + { 60, 0x00 }, { 61, 0x01 }, { 62, 0x00 }, { 63, 0x00 }, + { 64, 0x00 }, { 65, 0x00 }, { 66, 0x00 }, { 67, 0x00 }, + { 68, 0x00 }, { 69, 0x00 }, { 70, 0x00 }, { 71, 0x00 }, + { 72, 0x00 }, { 73, 0x00 }, { 74, 0x00 }, { 75, 0x00 }, + { 76, 0x00 }, { 77, 0x00 }, { 78, 0x00 }, { 79, 0x00 }, + { 80, 0x00 }, { 81, 0x00 }, { 82, 0x88 }, { 83, 0x00 }, + { 84, 0x00 }, { 85, 0x00 }, { 86, 0x00 }, { 87, 0x00 }, + { 88, 0x7f }, { 89, 0x00 }, { 90, 0x00 }, { 91, 0x00 }, + { 92, 0x00 }, { 93, 0x00 }, { 94, 0x00 }, { 95, 0x00 }, + { 96, 0x7f }, { 97, 0x00 }, { 98, 0x00 }, { 99, 0x00 }, + { 100, 0x00 }, { 101, 0x00 }, { 102, 0x00 }, { 103, 0x00 }, + { 104, 0x00 }, { 105, 0x00 }, { 106, 0x00 }, { 107, 0x00 }, + { 108, 0x00 }, { 109, 0x00 }, { 110, 0x00 }, { 111, 0x00 }, + { 112, 0x00 }, { 113, 0x00 }, { 114, 0x00 }, { 115, 0x00 }, + { 116, 0x00 }, { 117, 0x00 }, { 118, 0x00 }, { 119, 0x00 }, + { 120, 0x00 }, { 121, 0x00 }, { 122, 0x00 }, { 123, 0x00 }, + { 124, 0x00 }, { 125, 0x00 }, { 126, 0x00 }, { 127, 0x00 }, + + /* Page 1 */ + { 128, 0x00 }, { 129, 0x00 }, { 130, 0x00 }, { 131, 0x00 }, + { 132, 0x00 }, { 133, 0x00 }, { 134, 0x00 }, { 135, 0x00 }, + { 136, 0x00 }, { 137, 0x00 }, { 138, 0x00 }, { 139, 0x00 }, + { 140, 0x00 }, { 141, 0x00 }, { 142, 0x00 }, { 143, 0x00 }, + { 144, 0x00 }, { 145, 0x00 }, { 146, 0x00 }, { 147, 0x00 }, + { 148, 0x00 }, { 149, 0x00 }, { 150, 0x00 }, { 151, 0x00 }, + { 152, 0x00 }, { 153, 0x00 }, { 154, 0x00 }, { 155, 0x00 }, + { 156, 0x00 }, { 157, 0x00 }, { 158, 0x00 }, { 159, 0x00 }, + { 160, 0x00 }, { 161, 0x00 }, { 162, 0x00 }, { 163, 0x00 }, + { 164, 0x00 }, { 165, 0x00 }, { 166, 0x00 }, { 167, 0x00 }, + { 168, 0x00 }, { 169, 0x00 }, { 170, 0x00 }, { 171, 0x00 }, + { 172, 0x00 }, { 173, 0x00 }, { 174, 0x00 }, { 175, 0x00 }, + { 176, 0x00 }, { 177, 0x00 }, { 178, 0x00 }, { 179, 0x00 }, + { 180, 0xff }, { 181, 0x00 }, { 182, 0x3f }, { 183, 0xff }, + { 184, 0x00 }, { 185, 0x3f }, { 186, 0x00 }, { 187, 0x80 }, + { 188, 0x80 }, { 189, 0x00 }, { 190, 0x00 }, { 191, 0x00 }, +}; + +static bool adc3xxx_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case ADC3XXX_RESET: + return true; + default: + return false; + } +} + +static const struct regmap_range_cfg adc3xxx_ranges[] = { + { + .range_min = 0, + .range_max = 2 * ADC3XXX_PAGE_SIZE, + .selector_reg = ADC3XXX_PAGE_SELECT, + .selector_mask = 0xff, + .selector_shift = 0, + .window_start = 0, + .window_len = ADC3XXX_PAGE_SIZE, + } +}; + +static const struct regmap_config adc3xxx_regmap = { + .reg_bits = 8, + .val_bits = 8, + + .reg_defaults = adc3xxx_defaults, + .num_reg_defaults = ARRAY_SIZE(adc3xxx_defaults), + + .volatile_reg = adc3xxx_volatile_reg, + + .cache_type = REGCACHE_RBTREE, + + .ranges = adc3xxx_ranges, + .num_ranges = ARRAY_SIZE(adc3xxx_ranges), + .max_register = 2 * ADC3XXX_PAGE_SIZE, +}; + +struct adc3xxx_rate_divs { + u32 mclk; + u32 rate; + u8 pll_p; + u8 pll_r; + u8 pll_j; + u16 pll_d; + u8 nadc; + u8 madc; + u8 aosr; +}; + +/* + * PLL and Clock settings. + * If p member is 0, PLL is not used. + * The order of the entries in this table have the PLL entries before + * the non-PLL entries, so that the PLL modes are preferred unless + * the PLL mode setting says otherwise. + */ +static const struct adc3xxx_rate_divs adc3xxx_divs[] = { + /* mclk, rate, p, r, j, d, nadc, madc, aosr */ + /* 8k rate */ + { 12000000, 8000, 1, 1, 7, 1680, 42, 2, 128 }, + { 12288000, 8000, 1, 1, 7, 0000, 42, 2, 128 }, + /* 11.025k rate */ + { 12000000, 11025, 1, 1, 6, 8208, 29, 2, 128 }, + /* 16k rate */ + { 12000000, 16000, 1, 1, 7, 1680, 21, 2, 128 }, + { 12288000, 16000, 1, 1, 7, 0000, 21, 2, 128 }, + /* 22.05k rate */ + { 12000000, 22050, 1, 1, 7, 560, 15, 2, 128 }, + /* 32k rate */ + { 12000000, 32000, 1, 1, 8, 1920, 12, 2, 128 }, + { 12288000, 32000, 1, 1, 8, 0000, 12, 2, 128 }, + /* 44.1k rate */ + { 12000000, 44100, 1, 1, 7, 5264, 8, 2, 128 }, + /* 48k rate */ + { 12000000, 48000, 1, 1, 7, 1680, 7, 2, 128 }, + { 12288000, 48000, 1, 1, 7, 0000, 7, 2, 128 }, + { 24576000, 48000, 1, 1, 3, 5000, 7, 2, 128 }, /* With PLL */ + { 24576000, 48000, 0, 0, 0, 0000, 2, 2, 128 }, /* Without PLL */ + /* 88.2k rate */ + { 12000000, 88200, 1, 1, 7, 5264, 4, 4, 64 }, + /* 96k rate */ + { 12000000, 96000, 1, 1, 8, 1920, 4, 4, 64 }, +}; + +static int adc3xxx_get_divs(struct device *dev, int mclk, int rate, int pll_mode) +{ + int i; + + dev_dbg(dev, "mclk = %d, rate = %d, clock mode %u\n", + mclk, rate, pll_mode); + for (i = 0; i < ARRAY_SIZE(adc3xxx_divs); i++) { + const struct adc3xxx_rate_divs *mode = &adc3xxx_divs[i]; + + /* Skip this entry if it doesn't fulfill the intended clock + * mode requirement. We consider anything besides the two + * modes below to be the same as ADC3XXX_PLL_AUTO. + */ + if ((pll_mode == ADC3XXX_PLL_BYPASS && mode->pll_p) || + (pll_mode == ADC3XXX_PLL_ENABLE && !mode->pll_p)) + continue; + + if (mode->rate == rate && mode->mclk == mclk) + return i; + } + + dev_info(dev, "Master clock rate %d and sample rate %d is not supported\n", + mclk, rate); + return -EINVAL; +} + +static int adc3xxx_pll_delay(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + /* 10msec delay needed after PLL power-up to allow + * PLL and dividers to stabilize (datasheet p13). + */ + usleep_range(10000, 20000); + + return 0; +} + +static const char * const adc_softstepping_text[] = { "1 step", "2 step", "off" }; +static SOC_ENUM_SINGLE_DECL(adc_softstepping_enum, ADC3XXX_ADC_DIGITAL, 0, + adc_softstepping_text); + +static const char * const multiplier_text[] = { "1", "2", "4", "8", "16", "32", "64", "128" }; +static SOC_ENUM_SINGLE_DECL(left_agc_attack_mult_enum, + ADC3XXX_LEFT_CHN_AGC_4, 0, multiplier_text); +static SOC_ENUM_SINGLE_DECL(right_agc_attack_mult_enum, + ADC3XXX_RIGHT_CHN_AGC_4, 0, multiplier_text); +static SOC_ENUM_SINGLE_DECL(left_agc_decay_mult_enum, + ADC3XXX_LEFT_CHN_AGC_5, 0, multiplier_text); +static SOC_ENUM_SINGLE_DECL(right_agc_decay_mult_enum, + ADC3XXX_RIGHT_CHN_AGC_5, 0, multiplier_text); + +static const char * const dither_dc_offset_text[] = { + "0mV", "15mV", "30mV", "45mV", "60mV", "75mV", "90mV", "105mV", + "-15mV", "-30mV", "-45mV", "-60mV", "-75mV", "-90mV", "-105mV" +}; +static const unsigned int dither_dc_offset_values[] = { + 0, 1, 2, 3, 4, 5, 6, 7, 9, 10, 11, 12, 13, 14, 15 +}; +static SOC_VALUE_ENUM_DOUBLE_DECL(dither_dc_offset_enum, + ADC3XXX_DITHER_CTRL, + 4, 0, 0xf, dither_dc_offset_text, + dither_dc_offset_values); + +static const DECLARE_TLV_DB_SCALE(pga_tlv, 0, 50, 0); +static const DECLARE_TLV_DB_SCALE(adc_tlv, -1200, 50, 0); +static const DECLARE_TLV_DB_SCALE(adc_fine_tlv, -40, 10, 0); +/* AGC target: 8 values: -5.5, -8, -10, -12, -14, -17, -20, -24 dB */ +/* It would be nice to declare these in the order above, but empirically + * TLV_DB_SCALE_ITEM doesn't take lightly to the increment (second) parameter + * being negative, despite there being examples to the contrary in other + * drivers. So declare these in the order from lowest to highest, and + * set the invert flag in the SOC_DOUBLE_R_TLV declaration instead. + */ +static const DECLARE_TLV_DB_RANGE(agc_target_tlv, + 0, 0, TLV_DB_SCALE_ITEM(-2400, 0, 0), + 1, 3, TLV_DB_SCALE_ITEM(-2000, 300, 0), + 4, 6, TLV_DB_SCALE_ITEM(-1200, 200, 0), + 7, 7, TLV_DB_SCALE_ITEM(-550, 0, 0)); +/* Since the 'disabled' value (mute) is at the highest value in the dB + * range (i.e. just before -32 dB) rather than the lowest, we need to resort + * to using a TLV_DB_RANGE in order to get the mute value in the right place. + */ +static const DECLARE_TLV_DB_RANGE(agc_thresh_tlv, + 0, 30, TLV_DB_SCALE_ITEM(-9000, 200, 0), + 31, 31, TLV_DB_SCALE_ITEM(0, 0, 1)); /* disabled = mute */ +/* AGC hysteresis: 4 values: 1, 2, 4 dB, disabled (= mute) */ +static const DECLARE_TLV_DB_RANGE(agc_hysteresis_tlv, + 0, 1, TLV_DB_SCALE_ITEM(100, 100, 0), + 2, 2, TLV_DB_SCALE_ITEM(400, 0, 0), + 3, 3, TLV_DB_SCALE_ITEM(0, 0, 1)); /* disabled = mute */ +static const DECLARE_TLV_DB_SCALE(agc_max_tlv, 0, 50, 0); +/* Input attenuation: -6 dB or 0 dB */ +static const DECLARE_TLV_DB_SCALE(input_attenuation_tlv, -600, 600, 0); + +static const struct snd_kcontrol_new adc3xxx_snd_controls[] = { + SOC_DOUBLE_R_TLV("PGA Capture Volume", ADC3XXX_LEFT_APGA_CTRL, + ADC3XXX_RIGHT_APGA_CTRL, 0, 80, 0, pga_tlv), + SOC_DOUBLE("PGA Capture Switch", ADC3XXX_ADC_FGA, 7, 3, 1, 1), + SOC_DOUBLE_R("AGC Capture Switch", ADC3XXX_LEFT_CHN_AGC_1, + ADC3XXX_RIGHT_CHN_AGC_1, 7, 1, 0), + SOC_DOUBLE_R_TLV("AGC Target Level Capture Volume", ADC3XXX_LEFT_CHN_AGC_1, + ADC3XXX_RIGHT_CHN_AGC_2, 4, 0x07, 1, agc_target_tlv), + SOC_DOUBLE_R_TLV("AGC Noise Threshold Capture Volume", ADC3XXX_LEFT_CHN_AGC_2, + ADC3XXX_RIGHT_CHN_AGC_2, 1, 0x1f, 1, agc_thresh_tlv), + SOC_DOUBLE_R_TLV("AGC Hysteresis Capture Volume", ADC3XXX_LEFT_CHN_AGC_2, + ADC3XXX_RIGHT_CHN_AGC_2, 6, 3, 0, agc_hysteresis_tlv), + SOC_DOUBLE_R("AGC Clip Stepping Capture Switch", ADC3XXX_LEFT_CHN_AGC_2, + ADC3XXX_RIGHT_CHN_AGC_2, 0, 1, 0), + /* + * Oddly enough, the data sheet says the default value + * for the left/right AGC maximum gain register field + * (ADC3XXX_LEFT/RIGHT_CHN_AGC_3 bits 0..6) is 0x7f = 127 + * (verified empirically) even though this value (indeed, above + * 0x50) is specified as 'Reserved. Do not use.' in the accompanying + * table in the data sheet. + */ + SOC_DOUBLE_R_TLV("AGC Maximum Capture Volume", ADC3XXX_LEFT_CHN_AGC_3, + ADC3XXX_RIGHT_CHN_AGC_3, 0, 0x50, 0, agc_max_tlv), + SOC_DOUBLE_R("AGC Attack Time", ADC3XXX_LEFT_CHN_AGC_4, + ADC3XXX_RIGHT_CHN_AGC_4, 3, 0x1f, 0), + /* Would like to have the multipliers as LR pairs, but there is + * no SOC_ENUM_foo which accepts two values in separate registers. + */ + SOC_ENUM("AGC Left Attack Time Multiplier", left_agc_attack_mult_enum), + SOC_ENUM("AGC Right Attack Time Multiplier", right_agc_attack_mult_enum), + SOC_DOUBLE_R("AGC Decay Time", ADC3XXX_LEFT_CHN_AGC_5, + ADC3XXX_RIGHT_CHN_AGC_5, 3, 0x1f, 0), + SOC_ENUM("AGC Left Decay Time Multiplier", left_agc_decay_mult_enum), + SOC_ENUM("AGC Right Decay Time Multiplier", right_agc_decay_mult_enum), + SOC_DOUBLE_R("AGC Noise Debounce", ADC3XXX_LEFT_CHN_AGC_6, + ADC3XXX_RIGHT_CHN_AGC_6, 0, 0x1f, 0), + SOC_DOUBLE_R("AGC Signal Debounce", ADC3XXX_LEFT_CHN_AGC_7, + ADC3XXX_RIGHT_CHN_AGC_7, 0, 0x0f, 0), + /* Read only register */ + SOC_DOUBLE_R_S_TLV("AGC Applied Capture Volume", ADC3XXX_LEFT_AGC_GAIN, + ADC3XXX_RIGHT_AGC_GAIN, 0, -24, 40, 6, 0, adc_tlv), + /* ADC soft stepping */ + SOC_ENUM("ADC Soft Stepping", adc_softstepping_enum), + /* Left/Right Input attenuation */ + SOC_SINGLE_TLV("Left Input IN_1L Capture Volume", + ADC3XXX_LEFT_PGA_SEL_1, 0, 1, 1, input_attenuation_tlv), + SOC_SINGLE_TLV("Left Input IN_2L Capture Volume", + ADC3XXX_LEFT_PGA_SEL_1, 2, 1, 1, input_attenuation_tlv), + SOC_SINGLE_TLV("Left Input IN_3L Capture Volume", + ADC3XXX_LEFT_PGA_SEL_1, 4, 1, 1, input_attenuation_tlv), + SOC_SINGLE_TLV("Left Input IN_1R Capture Volume", + ADC3XXX_LEFT_PGA_SEL_2, 0, 1, 1, input_attenuation_tlv), + SOC_SINGLE_TLV("Left Input DIF_2L_3L Capture Volume", + ADC3XXX_LEFT_PGA_SEL_1, 6, 1, 1, input_attenuation_tlv), + SOC_SINGLE_TLV("Left Input DIF_1L_1R Capture Volume", + ADC3XXX_LEFT_PGA_SEL_2, 4, 1, 1, input_attenuation_tlv), + SOC_SINGLE_TLV("Left Input DIF_2R_3R Capture Volume", + ADC3XXX_LEFT_PGA_SEL_2, 2, 1, 1, input_attenuation_tlv), + SOC_SINGLE_TLV("Right Input IN_1R Capture Volume", + ADC3XXX_RIGHT_PGA_SEL_1, 0, 1, 1, input_attenuation_tlv), + SOC_SINGLE_TLV("Right Input IN_2R Capture Volume", + ADC3XXX_RIGHT_PGA_SEL_1, 2, 1, 1, input_attenuation_tlv), + SOC_SINGLE_TLV("Right Input IN_3R Capture Volume", + ADC3XXX_RIGHT_PGA_SEL_1, 4, 1, 1, input_attenuation_tlv), + SOC_SINGLE_TLV("Right Input IN_1L Capture Volume", + ADC3XXX_RIGHT_PGA_SEL_2, 0, 1, 1, input_attenuation_tlv), + SOC_SINGLE_TLV("Right Input DIF_2R_3R Capture Volume", + ADC3XXX_RIGHT_PGA_SEL_1, 6, 1, 1, input_attenuation_tlv), + SOC_SINGLE_TLV("Right Input DIF_1L_1R Capture Volume", + ADC3XXX_RIGHT_PGA_SEL_2, 4, 1, 1, input_attenuation_tlv), + SOC_SINGLE_TLV("Right Input DIF_2L_3L Capture Volume", + ADC3XXX_RIGHT_PGA_SEL_2, 2, 1, 1, input_attenuation_tlv), + SOC_DOUBLE_R_S_TLV("ADC Volume Control Capture Volume", ADC3XXX_LADC_VOL, + ADC3XXX_RADC_VOL, 0, -24, 40, 6, 0, adc_tlv), + /* Empirically, the following doesn't work the way it's supposed + * to. Values 0, -0.1, -0.2 and -0.3 dB result in the same level, and + * -0.4 dB drops about 0.12 dB on a specific chip. + */ + SOC_DOUBLE_TLV("ADC Fine Volume Control Capture Volume", ADC3XXX_ADC_FGA, + 4, 0, 4, 1, adc_fine_tlv), + SOC_SINGLE("Left ADC Unselected CM Bias Capture Switch", + ADC3XXX_LEFT_PGA_SEL_2, 6, 1, 0), + SOC_SINGLE("Right ADC Unselected CM Bias Capture Switch", + ADC3XXX_RIGHT_PGA_SEL_2, 6, 1, 0), + SOC_ENUM("Dither Control DC Offset", dither_dc_offset_enum), +}; + +/* Left input selection, Single Ended inputs and Differential inputs */ +static const struct snd_kcontrol_new left_input_mixer_controls[] = { + SOC_DAPM_SINGLE("IN_1L Capture Switch", + ADC3XXX_LEFT_PGA_SEL_1, 1, 0x1, 1), + SOC_DAPM_SINGLE("IN_2L Capture Switch", + ADC3XXX_LEFT_PGA_SEL_1, 3, 0x1, 1), + SOC_DAPM_SINGLE("IN_3L Capture Switch", + ADC3XXX_LEFT_PGA_SEL_1, 5, 0x1, 1), + SOC_DAPM_SINGLE("DIF_2L_3L Capture Switch", + ADC3XXX_LEFT_PGA_SEL_1, 7, 0x1, 1), + SOC_DAPM_SINGLE("DIF_1L_1R Capture Switch", + ADC3XXX_LEFT_PGA_SEL_2, 5, 0x1, 1), + SOC_DAPM_SINGLE("DIF_2R_3R Capture Switch", + ADC3XXX_LEFT_PGA_SEL_2, 3, 0x1, 1), + SOC_DAPM_SINGLE("IN_1R Capture Switch", + ADC3XXX_LEFT_PGA_SEL_2, 1, 0x1, 1), +}; + +/* Right input selection, Single Ended inputs and Differential inputs */ +static const struct snd_kcontrol_new right_input_mixer_controls[] = { + SOC_DAPM_SINGLE("IN_1R Capture Switch", + ADC3XXX_RIGHT_PGA_SEL_1, 1, 0x1, 1), + SOC_DAPM_SINGLE("IN_2R Capture Switch", + ADC3XXX_RIGHT_PGA_SEL_1, 3, 0x1, 1), + SOC_DAPM_SINGLE("IN_3R Capture Switch", + ADC3XXX_RIGHT_PGA_SEL_1, 5, 0x1, 1), + SOC_DAPM_SINGLE("DIF_2R_3R Capture Switch", + ADC3XXX_RIGHT_PGA_SEL_1, 7, 0x1, 1), + SOC_DAPM_SINGLE("DIF_1L_1R Capture Switch", + ADC3XXX_RIGHT_PGA_SEL_2, 5, 0x1, 1), + SOC_DAPM_SINGLE("DIF_2L_3L Capture Switch", + ADC3XXX_RIGHT_PGA_SEL_2, 3, 0x1, 1), + SOC_DAPM_SINGLE("IN_1L Capture Switch", + ADC3XXX_RIGHT_PGA_SEL_2, 1, 0x1, 1), +}; + +/* Left Digital Mic input for left ADC */ +static const struct snd_kcontrol_new left_input_dmic_controls[] = { + SOC_DAPM_SINGLE("Left ADC Capture Switch", + ADC3XXX_ADC_DIGITAL, 3, 0x1, 0), +}; + +/* Right Digital Mic input for Right ADC */ +static const struct snd_kcontrol_new right_input_dmic_controls[] = { + SOC_DAPM_SINGLE("Right ADC Capture Switch", + ADC3XXX_ADC_DIGITAL, 2, 0x1, 0), +}; + +/* DAPM widgets */ +static const struct snd_soc_dapm_widget adc3xxx_dapm_widgets[] = { + + /* Left Input Selection */ + SND_SOC_DAPM_MIXER("Left Input", SND_SOC_NOPM, 0, 0, + &left_input_mixer_controls[0], + ARRAY_SIZE(left_input_mixer_controls)), + /* Right Input Selection */ + SND_SOC_DAPM_MIXER("Right Input", SND_SOC_NOPM, 0, 0, + &right_input_mixer_controls[0], + ARRAY_SIZE(right_input_mixer_controls)), + /* PGA selection */ + SND_SOC_DAPM_PGA("Left PGA", ADC3XXX_LEFT_APGA_CTRL, 7, 1, NULL, 0), + SND_SOC_DAPM_PGA("Right PGA", ADC3XXX_RIGHT_APGA_CTRL, 7, 1, NULL, 0), + + /* Digital Microphone Input Control for Left/Right ADC */ + SND_SOC_DAPM_MIXER("Left DMic Input", SND_SOC_NOPM, 0, 0, + &left_input_dmic_controls[0], + ARRAY_SIZE(left_input_dmic_controls)), + SND_SOC_DAPM_MIXER("Right DMic Input", SND_SOC_NOPM, 0, 0, + &right_input_dmic_controls[0], + ARRAY_SIZE(right_input_dmic_controls)), + + /* Left/Right ADC */ + SND_SOC_DAPM_ADC("Left ADC", "Left Capture", ADC3XXX_ADC_DIGITAL, 7, 0), + SND_SOC_DAPM_ADC("Right ADC", "Right Capture", ADC3XXX_ADC_DIGITAL, 6, 0), + + /* Inputs */ + SND_SOC_DAPM_INPUT("IN_1L"), + SND_SOC_DAPM_INPUT("IN_1R"), + SND_SOC_DAPM_INPUT("IN_2L"), + SND_SOC_DAPM_INPUT("IN_2R"), + SND_SOC_DAPM_INPUT("IN_3L"), + SND_SOC_DAPM_INPUT("IN_3R"), + SND_SOC_DAPM_INPUT("DIFL_1L_1R"), + SND_SOC_DAPM_INPUT("DIFL_2L_3L"), + SND_SOC_DAPM_INPUT("DIFL_2R_3R"), + SND_SOC_DAPM_INPUT("DIFR_1L_1R"), + SND_SOC_DAPM_INPUT("DIFR_2L_3L"), + SND_SOC_DAPM_INPUT("DIFR_2R_3R"), + SND_SOC_DAPM_INPUT("DMic_L"), + SND_SOC_DAPM_INPUT("DMic_R"), + + /* Digital audio interface output */ + SND_SOC_DAPM_AIF_OUT("AIF_OUT", "Capture", 0, SND_SOC_NOPM, 0, 0), + + /* Clocks */ + SND_SOC_DAPM_SUPPLY("PLL_CLK", ADC3XXX_PLL_PROG_PR, ADC3XXX_ENABLE_PLL_SHIFT, + 0, adc3xxx_pll_delay, SND_SOC_DAPM_POST_PMU), + + SND_SOC_DAPM_SUPPLY("ADC_CLK", ADC3XXX_ADC_NADC, ADC3XXX_ENABLE_NADC_SHIFT, + 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("ADC_MOD_CLK", ADC3XXX_ADC_MADC, ADC3XXX_ENABLE_MADC_SHIFT, + 0, NULL, 0), + + /* This refers to the generated BCLK in master mode. */ + SND_SOC_DAPM_SUPPLY("BCLK", ADC3XXX_BCLK_N_DIV, ADC3XXX_ENABLE_BCLK_SHIFT, + 0, NULL, 0), +}; + +static const struct snd_soc_dapm_route adc3xxx_intercon[] = { + /* Left input selection from switches */ + { "Left Input", "IN_1L Capture Switch", "IN_1L" }, + { "Left Input", "IN_2L Capture Switch", "IN_2L" }, + { "Left Input", "IN_3L Capture Switch", "IN_3L" }, + { "Left Input", "DIF_2L_3L Capture Switch", "DIFL_2L_3L" }, + { "Left Input", "DIF_1L_1R Capture Switch", "DIFL_1L_1R" }, + { "Left Input", "DIF_2R_3R Capture Switch", "DIFL_2R_3R" }, + { "Left Input", "IN_1R Capture Switch", "IN_1R" }, + + /* Left input selection to left PGA */ + { "Left PGA", NULL, "Left Input" }, + + /* Left PGA to left ADC */ + { "Left ADC", NULL, "Left PGA" }, + + /* Right input selection from switches */ + { "Right Input", "IN_1R Capture Switch", "IN_1R" }, + { "Right Input", "IN_2R Capture Switch", "IN_2R" }, + { "Right Input", "IN_3R Capture Switch", "IN_3R" }, + { "Right Input", "DIF_2R_3R Capture Switch", "DIFR_2R_3R" }, + { "Right Input", "DIF_1L_1R Capture Switch", "DIFR_1L_1R" }, + { "Right Input", "DIF_2L_3L Capture Switch", "DIFR_2L_3L" }, + { "Right Input", "IN_1L Capture Switch", "IN_1L" }, + + /* Right input selection to right PGA */ + { "Right PGA", NULL, "Right Input" }, + + /* Right PGA to right ADC */ + { "Right ADC", NULL, "Right PGA" }, + + /* Left DMic Input selection from switch */ + { "Left DMic Input", "Left ADC Capture Switch", "DMic_L" }, + + /* Left DMic to left ADC */ + { "Left ADC", NULL, "Left DMic Input" }, + + /* Right DMic Input selection from switch */ + { "Right DMic Input", "Right ADC Capture Switch", "DMic_R" }, + + /* Right DMic to right ADC */ + { "Right ADC", NULL, "Right DMic Input" }, + + /* ADC to AIF output */ + { "AIF_OUT", NULL, "Left ADC" }, + { "AIF_OUT", NULL, "Right ADC" }, + + /* Clocking */ + { "ADC_MOD_CLK", NULL, "ADC_CLK" }, + { "Left ADC", NULL, "ADC_MOD_CLK" }, + { "Right ADC", NULL, "ADC_MOD_CLK" }, + + { "BCLK", NULL, "ADC_CLK" }, +}; + +static const struct snd_soc_dapm_route adc3xxx_pll_intercon[] = { + { "ADC_CLK", NULL, "PLL_CLK" }, +}; + +static const struct snd_soc_dapm_route adc3xxx_bclk_out_intercon[] = { + { "AIF_OUT", NULL, "BCLK" } +}; + +static int adc3xxx_gpio_request(struct gpio_chip *chip, unsigned int offset) +{ + struct adc3xxx *adc3xxx = gpiochip_get_data(chip); + + if (offset >= ADC3XXX_GPIOS_MAX) + return -EINVAL; + + /* GPIO1 is offset 0, GPIO2 is offset 1 */ + /* We check here that the GPIO pins are either not configured in the + * DT, or that they purposely are set as outputs. + * (Input mode not yet implemented). + */ + if (adc3xxx->gpio_cfg[offset] != 0 && + adc3xxx->gpio_cfg[offset] != ADC3XXX_GPIO_GPO + 1) + return -EINVAL; + + return 0; +} + +static int adc3xxx_gpio_direction_out(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct adc3xxx *adc3xxx = gpiochip_get_data(chip); + + /* Set GPIO output function. */ + return regmap_update_bits(adc3xxx->regmap, + adc3xxx_gpio_ctrl_reg[offset], + ADC3XXX_GPIO_CTRL_CFG_MASK | + ADC3XXX_GPIO_CTRL_OUTPUT_CTRL_MASK, + ADC3XXX_GPIO_GPO << ADC3XXX_GPIO_CTRL_CFG_SHIFT | + !!value << ADC3XXX_GPIO_CTRL_OUTPUT_CTRL_SHIFT); +} + +/* With only GPIO outputs configured, we never get the .direction_out call, + * so we set the output mode and output value in the same call. Hence + * .set in practice does the same thing as .direction_out . + */ +static void adc3xxx_gpio_set(struct gpio_chip *chip, unsigned int offset, + int value) +{ + (void) adc3xxx_gpio_direction_out(chip, offset, value); +} + +/* Even though we only support GPIO output for now, some GPIO clients + * want to read the current pin state using the .get callback. + */ +static int adc3xxx_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + struct adc3xxx *adc3xxx = gpiochip_get_data(chip); + unsigned int regval; + int ret; + + /* We only allow output pins, so just read the value set in the output + * pin register field. + */ + ret = regmap_read(adc3xxx->regmap, adc3xxx_gpio_ctrl_reg[offset], &regval); + if (ret) + return ret; + return !!(regval & ADC3XXX_GPIO_CTRL_OUTPUT_CTRL_MASK); +} + +static const struct gpio_chip adc3xxx_gpio_chip = { + .label = "adc3xxx", + .owner = THIS_MODULE, + .request = adc3xxx_gpio_request, + .direction_output = adc3xxx_gpio_direction_out, + .set = adc3xxx_gpio_set, + .get = adc3xxx_gpio_get, + .can_sleep = 1, +}; + +static void adc3xxx_free_gpio(struct adc3xxx *adc3xxx) +{ + gpiochip_remove(&adc3xxx->gpio_chip); +} + +static void adc3xxx_init_gpio(struct adc3xxx *adc3xxx) +{ + int gpio, micbias; + int ret; + + adc3xxx->gpio_chip = adc3xxx_gpio_chip; + adc3xxx->gpio_chip.ngpio = ADC3XXX_GPIOS_MAX; + adc3xxx->gpio_chip.parent = adc3xxx->dev; + adc3xxx->gpio_chip.base = -1; + + ret = gpiochip_add_data(&adc3xxx->gpio_chip, adc3xxx); + if (ret) + dev_err(adc3xxx->dev, "Failed to add gpios: %d\n", ret); + + /* Set up potential GPIO configuration from the devicetree. + * This allows us to set up things which are not software + * controllable GPIOs, such as PDM microphone I/O, + */ + for (gpio = 0; gpio < ADC3XXX_GPIOS_MAX; gpio++) { + unsigned int cfg = adc3xxx->gpio_cfg[gpio]; + + if (cfg) { + cfg--; /* actual value to use is stored +1 */ + regmap_update_bits(adc3xxx->regmap, + adc3xxx_gpio_ctrl_reg[gpio], + ADC3XXX_GPIO_CTRL_CFG_MASK, + cfg << ADC3XXX_GPIO_CTRL_CFG_SHIFT); + } + } + + /* Set up micbias voltage */ + for (micbias = 0; micbias < ADC3XXX_MICBIAS_PINS; micbias++) { + unsigned int vg = adc3xxx->micbias_vg[micbias]; + + regmap_update_bits(adc3xxx->regmap, + ADC3XXX_MICBIAS_CTRL, + ADC3XXX_MICBIAS_MASK << adc3xxx_micbias_shift[micbias], + vg << adc3xxx_micbias_shift[micbias]); + } +} + +static int adc3xxx_parse_dt_gpio(struct adc3xxx *adc3xxx, + const char *propname, unsigned int *cfg) +{ + struct device *dev = adc3xxx->dev; + struct device_node *np = dev->of_node; + unsigned int val; + + if (!of_property_read_u32(np, propname, &val)) { + if (val & ~15 || val == 7 || val >= 11) { + dev_err(dev, "Invalid property value for '%s'\n", propname); + return -EINVAL; + } + if (val == ADC3XXX_GPIO_GPI) + dev_warn(dev, "GPIO Input read not yet implemented\n"); + *cfg = val + 1; /* 0 => not set up, all others shifted +1 */ + } + return 0; +} + +static int adc3xxx_parse_dt_micbias(struct adc3xxx *adc3xxx, + const char *propname, unsigned int *vg) +{ + struct device *dev = adc3xxx->dev; + struct device_node *np = dev->of_node; + unsigned int val; + + if (!of_property_read_u32(np, propname, &val)) { + if (val >= ADC3XXX_MICBIAS_AVDD) { + dev_err(dev, "Invalid property value for '%s'\n", propname); + return -EINVAL; + } + *vg = val; + } + return 0; +} + +static int adc3xxx_parse_pll_mode(uint32_t val, unsigned int *pll_mode) +{ + if (val != ADC3XXX_PLL_ENABLE && val != ADC3XXX_PLL_BYPASS && + val != ADC3XXX_PLL_AUTO) + return -EINVAL; + + *pll_mode = val; + + return 0; +} + +static void adc3xxx_setup_pll(struct snd_soc_component *component, + int div_entry) +{ + int i = div_entry; + + /* P & R values */ + snd_soc_component_write(component, ADC3XXX_PLL_PROG_PR, + (adc3xxx_divs[i].pll_p << ADC3XXX_PLLP_SHIFT) | + (adc3xxx_divs[i].pll_r << ADC3XXX_PLLR_SHIFT)); + /* J value */ + snd_soc_component_write(component, ADC3XXX_PLL_PROG_J, + adc3xxx_divs[i].pll_j & ADC3XXX_PLLJ_MASK); + /* D value */ + snd_soc_component_write(component, ADC3XXX_PLL_PROG_D_LSB, + adc3xxx_divs[i].pll_d & ADC3XXX_PLLD_LSB_MASK); + snd_soc_component_write(component, ADC3XXX_PLL_PROG_D_MSB, + (adc3xxx_divs[i].pll_d >> 8) & ADC3XXX_PLLD_MSB_MASK); +} + +static int adc3xxx_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(dai->component); + struct adc3xxx *adc3xxx = snd_soc_component_get_drvdata(component); + int i, width = 16; + u8 iface_len, bdiv; + + i = adc3xxx_get_divs(component->dev, adc3xxx->sysclk, + params_rate(params), adc3xxx->pll_mode); + + if (i < 0) + return i; + + /* select data word length */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + iface_len = ADC3XXX_IFACE_16BITS; + width = 16; + break; + case SNDRV_PCM_FORMAT_S20_3LE: + iface_len = ADC3XXX_IFACE_20BITS; + width = 20; + break; + case SNDRV_PCM_FORMAT_S24_LE: + iface_len = ADC3XXX_IFACE_24BITS; + width = 24; + break; + case SNDRV_PCM_FORMAT_S32_LE: + iface_len = ADC3XXX_IFACE_32BITS; + width = 32; + break; + default: + dev_err(component->dev, "Unsupported serial data format\n"); + return -EINVAL; + } + snd_soc_component_update_bits(component, ADC3XXX_INTERFACE_CTRL_1, + ADC3XXX_WLENGTH_MASK, iface_len); + if (adc3xxx_divs[i].pll_p) { /* If PLL used for this mode */ + adc3xxx_setup_pll(component, i); + snd_soc_component_write(component, ADC3XXX_CLKGEN_MUX, ADC3XXX_USE_PLL); + if (!adc3xxx->use_pll) { + snd_soc_dapm_add_routes(dapm, adc3xxx_pll_intercon, + ARRAY_SIZE(adc3xxx_pll_intercon)); + adc3xxx->use_pll = 1; + } + } else { + snd_soc_component_write(component, ADC3XXX_CLKGEN_MUX, ADC3XXX_NO_PLL); + if (adc3xxx->use_pll) { + snd_soc_dapm_del_routes(dapm, adc3xxx_pll_intercon, + ARRAY_SIZE(adc3xxx_pll_intercon)); + adc3xxx->use_pll = 0; + } + } + + /* NADC */ + snd_soc_component_update_bits(component, ADC3XXX_ADC_NADC, + ADC3XXX_NADC_MASK, adc3xxx_divs[i].nadc); + /* MADC */ + snd_soc_component_update_bits(component, ADC3XXX_ADC_MADC, + ADC3XXX_MADC_MASK, adc3xxx_divs[i].madc); + /* AOSR */ + snd_soc_component_update_bits(component, ADC3XXX_ADC_AOSR, + ADC3XXX_AOSR_MASK, adc3xxx_divs[i].aosr); + /* BDIV N Value */ + /* BCLK is (by default) set up to be derived from ADC_CLK */ + bdiv = (adc3xxx_divs[i].aosr * adc3xxx_divs[i].madc) / (2 * width); + snd_soc_component_update_bits(component, ADC3XXX_BCLK_N_DIV, + ADC3XXX_BDIV_MASK, bdiv); + + return 0; +} + +static const char *adc3xxx_pll_mode_text(int pll_mode) +{ + switch (pll_mode) { + case ADC3XXX_PLL_AUTO: + return "PLL auto"; + case ADC3XXX_PLL_ENABLE: + return "PLL enable"; + case ADC3XXX_PLL_BYPASS: + return "PLL bypass"; + default: + break; + } + + return "PLL unknown"; +} + +static int adc3xxx_set_dai_sysclk(struct snd_soc_dai *codec_dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_component *component = codec_dai->component; + struct adc3xxx *adc3xxx = snd_soc_component_get_drvdata(component); + int ret; + + ret = adc3xxx_parse_pll_mode(clk_id, &adc3xxx->pll_mode); + if (ret < 0) + return ret; + + adc3xxx->sysclk = freq; + dev_dbg(component->dev, "Set sysclk to %u Hz, %s\n", + freq, adc3xxx_pll_mode_text(adc3xxx->pll_mode)); + return 0; +} + +static int adc3xxx_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) +{ + struct snd_soc_component *component = codec_dai->component; + struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component); + struct adc3xxx *adc3xxx = snd_soc_component_get_drvdata(component); + u8 clkdir = 0, format = 0; + int master = 0; + + /* set master/slave audio interface */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBP_CFP: + master = 1; + clkdir = ADC3XXX_BCLK_MASTER | ADC3XXX_WCLK_MASTER; + break; + case SND_SOC_DAIFMT_CBC_CFC: + master = 0; + break; + default: + dev_err(component->dev, "Invalid DAI clock setup\n"); + return -EINVAL; + } + + /* + * match both interface format and signal polarities since they + * are fixed + */ + switch (fmt & (SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_INV_MASK)) { + case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF: + format = ADC3XXX_FORMAT_I2S; + break; + case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_IB_NF: + format = ADC3XXX_FORMAT_DSP; + break; + case SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_IB_NF: + format = ADC3XXX_FORMAT_DSP; + break; + case SND_SOC_DAIFMT_RIGHT_J | SND_SOC_DAIFMT_NB_NF: + format = ADC3XXX_FORMAT_RJF; + break; + case SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_NB_NF: + format = ADC3XXX_FORMAT_LJF; + break; + default: + dev_err(component->dev, "Invalid DAI format\n"); + return -EINVAL; + } + + /* Add/del route enabling BCLK output as applicable */ + if (master && !adc3xxx->master) + snd_soc_dapm_add_routes(dapm, adc3xxx_bclk_out_intercon, + ARRAY_SIZE(adc3xxx_bclk_out_intercon)); + else if (!master && adc3xxx->master) + snd_soc_dapm_del_routes(dapm, adc3xxx_bclk_out_intercon, + ARRAY_SIZE(adc3xxx_bclk_out_intercon)); + adc3xxx->master = master; + + /* set clock direction and format */ + return snd_soc_component_update_bits(component, + ADC3XXX_INTERFACE_CTRL_1, + ADC3XXX_CLKDIR_MASK | ADC3XXX_FORMAT_MASK, + clkdir | format); +} + +static const struct snd_soc_dai_ops adc3xxx_dai_ops = { + .hw_params = adc3xxx_hw_params, + .set_sysclk = adc3xxx_set_dai_sysclk, + .set_fmt = adc3xxx_set_dai_fmt, +}; + +static struct snd_soc_dai_driver adc3xxx_dai = { + .name = "tlv320adc3xxx-hifi", + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 2, + .rates = ADC3XXX_RATES, + .formats = ADC3XXX_FORMATS, + }, + .ops = &adc3xxx_dai_ops, +}; + +static const struct snd_soc_component_driver soc_component_dev_adc3xxx = { + .controls = adc3xxx_snd_controls, + .num_controls = ARRAY_SIZE(adc3xxx_snd_controls), + .dapm_widgets = adc3xxx_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(adc3xxx_dapm_widgets), + .dapm_routes = adc3xxx_intercon, + .num_dapm_routes = ARRAY_SIZE(adc3xxx_intercon), +}; + +static int adc3xxx_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct device *dev = &i2c->dev; + struct adc3xxx *adc3xxx = NULL; + int ret; + + adc3xxx = devm_kzalloc(dev, sizeof(struct adc3xxx), GFP_KERNEL); + if (!adc3xxx) + return -ENOMEM; + adc3xxx->dev = dev; + + adc3xxx->rst_pin = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(adc3xxx->rst_pin)) { + return dev_err_probe(dev, PTR_ERR(adc3xxx->rst_pin), + "Failed to request rst_pin\n"); + } + + adc3xxx->mclk = devm_clk_get(dev, NULL); + if (IS_ERR(adc3xxx->mclk)) { + /* + * The chip itself supports running off the BCLK either + * directly or via the PLL, but the driver does not (yet), so + * having a specified mclk is required. Otherwise, we could + * use the lack of a clocks property to indicate when BCLK is + * intended as the clock source. + */ + return dev_err_probe(dev, PTR_ERR(adc3xxx->mclk), + "Failed to acquire MCLK\n"); + } else if (adc3xxx->mclk) { + ret = clk_prepare_enable(adc3xxx->mclk); + if (ret < 0) + return ret; + dev_dbg(dev, "Enabled MCLK, freq %lu Hz\n", clk_get_rate(adc3xxx->mclk)); + } + + ret = adc3xxx_parse_dt_gpio(adc3xxx, "ti,dmdin-gpio1", &adc3xxx->gpio_cfg[0]); + if (ret < 0) + return ret; + ret = adc3xxx_parse_dt_gpio(adc3xxx, "ti,dmclk-gpio2", &adc3xxx->gpio_cfg[1]); + if (ret < 0) + return ret; + ret = adc3xxx_parse_dt_micbias(adc3xxx, "ti,micbias1-vg", &adc3xxx->micbias_vg[0]); + if (ret < 0) + return ret; + ret = adc3xxx_parse_dt_micbias(adc3xxx, "ti,micbias2-vg", &adc3xxx->micbias_vg[1]); + if (ret < 0) + return ret; + + adc3xxx->regmap = devm_regmap_init_i2c(i2c, &adc3xxx_regmap); + if (IS_ERR(adc3xxx->regmap)) { + ret = PTR_ERR(adc3xxx->regmap); + return ret; + } + + i2c_set_clientdata(i2c, adc3xxx); + + adc3xxx->type = id->driver_data; + + /* Reset codec chip */ + gpiod_set_value_cansleep(adc3xxx->rst_pin, 1); + usleep_range(2000, 100000); /* Requirement: > 10 ns (datasheet p13) */ + gpiod_set_value_cansleep(adc3xxx->rst_pin, 0); + + /* Potentially set up pins used as GPIOs */ + adc3xxx_init_gpio(adc3xxx); + + ret = snd_soc_register_component(dev, + &soc_component_dev_adc3xxx, &adc3xxx_dai, 1); + if (ret < 0) + dev_err(dev, "Failed to register codec: %d\n", ret); + + return ret; +} + +static int __exit adc3xxx_i2c_remove(struct i2c_client *client) +{ + struct adc3xxx *adc3xxx = i2c_get_clientdata(client); + + if (adc3xxx->mclk) + clk_disable_unprepare(adc3xxx->mclk); + adc3xxx_free_gpio(adc3xxx); + snd_soc_unregister_component(&client->dev); + return 0; +} + +static const struct of_device_id tlv320adc3xxx_of_match[] = { + { .compatible = "ti,tlv320adc3001", }, + { .compatible = "ti,tlv320adc3101", }, + {}, +}; +MODULE_DEVICE_TABLE(of, tlv320adc3xxx_of_match); + +static const struct i2c_device_id adc3xxx_i2c_id[] = { + { "tlv320adc3001", ADC3001 }, + { "tlv320adc3101", ADC3101 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, adc3xxx_i2c_id); + +static struct i2c_driver adc3xxx_i2c_driver = { + .driver = { + .name = "tlv320adc3xxx-codec", + .of_match_table = tlv320adc3xxx_of_match, + }, + .probe = adc3xxx_i2c_probe, + .remove = adc3xxx_i2c_remove, + .id_table = adc3xxx_i2c_id, +}; + +module_i2c_driver(adc3xxx_i2c_driver); + +MODULE_DESCRIPTION("ASoC TLV320ADC3xxx codec driver"); +MODULE_AUTHOR("shahina.s(a)mistralsolutions.com"); +MODULE_LICENSE("GPL v2"); -- 2.20.1 -- Ricard Wolf Wanderlof ricardw(at)axis.com Axis Communications AB, Lund, Sweden www.axis.com Phone +46 46 272 2016 Fax +46 46 13 61 30

1 0