December 2021 - Alsa-devel - mailman.alsa-project.org

[PATCH v6 00/10] Add support for CS35L41 in HDA systems
by Lucas Tanure 31 Oct '22

31 Oct '22

Add support for laptops that have CS35L41 connected to an HDA codec by I2S and direct I2C connection to the CPU. Laptops that use CS35L41 and are SPI will be added in the future, after the support for it is resolved at i2c-multi-instantiate driver. i2c-multi-instantiate thread: https://lkml.org/lkml/2021/12/10/557 Hardware: - Some laptops have two CS35L41 amplifiers, connected to Realtek ALC287 by an I2S bus and by and direct I2C to the CPU. - The ALC287 codec is connected to the CPU by an HDA bus. - The CS35L41 has a DSP which will require firmware to be loaded. Architecture: - Creation of a library of shared functions for CS35L41 ASoC and HDA - HDA codec driver (RealTek) and CS35L41 HDA driver are combined by using component binding, where it uses device names to find the components and bind to the master - The HDA CS35L41 driver applies pre-defined registers sequences for each action in playback for HDA Sound card Changes from V5: - Fix build issues reported by Intel Test Bot - Check devm_kasprintf return - Add ACPI dependency to HDA drivers V5: https://lkml.org/lkml/2021/12/16/430 Changes from V4: - Save index received from ACPI for latter use in DSP Support - Move CS35L41_DSP1_CCM_CORE_CTRL to regmap_write so doesn't affect DSP hibernation feature V4: https://lkml.org/lkml/2021/12/14/487 Changes from V3: - SPI bus driver starter added - Use separate modules approach instead of liking library - Add CSC3551 ACPI _HID for more I2C laptops - Removed regulators from HDA driver - Add note about Non-conforming _HID V3: https://lkml.org/lkml/2021/11/23/723 Changes from V2: - Not an RFC - Create a new HDA driver for CS35L41 instead of using the ASoC one - Use component binding and device names to find the CS35L41 driver - Create a shared library for ASoC and HDA CS35L41 drivers v2: https://lkml.org/lkml/2021/10/8/344 Lucas Tanure (9): ASoC: cs35l41: Convert tables to shared source code ASoC: cs35l41: Move cs35l41_otp_unpack to shared code ASoC: cs35l41: Move power initializations to reg_sequence ASoC: cs35l41: Create shared function for errata patches ASoC: cs35l41: Create shared function for setting channels ASoC: cs35l41: Create shared function for boost configuration hda: cs35l41: Add support for CS35L41 in HDA systems ACPI / scan: Create platform device for CLSA0100 and CSC3551 ACPI nodes ALSA: hda/realtek: Add support for Legion 7 16ACHg6 laptop Stefan Binding (1): ALSA: hda/realtek: Add CS35L41 support for Thinkpad laptops MAINTAINERS | 2 + drivers/acpi/scan.c | 3 + drivers/platform/x86/i2c-multi-instantiate.c | 11 + include/sound/cs35l41.h | 739 ++++++++++++++++++ sound/pci/hda/Kconfig | 29 + sound/pci/hda/Makefile | 10 + sound/pci/hda/cs35l41_hda.c | 527 +++++++++++++ sound/pci/hda/cs35l41_hda.h | 69 ++ sound/pci/hda/cs35l41_hda_i2c.c | 66 ++ sound/pci/hda/cs35l41_hda_spi.c | 63 ++ sound/pci/hda/hda_component.h | 20 + sound/pci/hda/patch_realtek.c | 146 ++++ sound/soc/codecs/Kconfig | 11 +- sound/soc/codecs/Makefile | 4 +- sound/soc/codecs/cs35l41-i2c.c | 1 - .../{cs35l41-tables.c => cs35l41-lib.c} | 355 ++++++++- sound/soc/codecs/cs35l41-spi.c | 1 - sound/soc/codecs/cs35l41.c | 360 +-------- sound/soc/codecs/cs35l41.h | 734 ----------------- 19 files changed, 2055 insertions(+), 1096 deletions(-) create mode 100644 sound/pci/hda/cs35l41_hda.c create mode 100644 sound/pci/hda/cs35l41_hda.h create mode 100644 sound/pci/hda/cs35l41_hda_i2c.c create mode 100644 sound/pci/hda/cs35l41_hda_spi.c create mode 100644 sound/pci/hda/hda_component.h rename sound/soc/codecs/{cs35l41-tables.c => cs35l41-lib.c} (71%) -- 2.34.1

11 28

[PATCH 1/2] ALSA: hda: Add Intel DG2 PCI ID and HDMI codec vid
by Kai Vehmanen 14 Oct '22

14 Oct '22

Add HD Audio PCI ID and HDMI codec vendor ID for Intel DG2. Reviewed-by: Uma Shankar <uma.shankar(a)intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen(a)linux.intel.com> --- sound/pci/hda/hda_intel.c | 12 +++++++++++- sound/pci/hda/patch_hdmi.c | 1 + 2 files changed, 12 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 221afacbc7fd..b98d7975adea 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -335,7 +335,10 @@ enum { ((pci)->device == 0x0c0c) || \ ((pci)->device == 0x0d0c) || \ ((pci)->device == 0x160c) || \ - ((pci)->device == 0x490d)) + ((pci)->device == 0x490d) || \ + ((pci)->device == 0x4f90) || \ + ((pci)->device == 0x4f91) || \ + ((pci)->device == 0x4f92)) #define IS_BXT(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0x5a98) @@ -2477,6 +2480,13 @@ static const struct pci_device_id azx_ids[] = { /* DG1 */ { PCI_DEVICE(0x8086, 0x490d), .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE}, + /* DG2 */ + { PCI_DEVICE(0x8086, 0x4f90), + .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE}, + { PCI_DEVICE(0x8086, 0x4f91), + .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE}, + { PCI_DEVICE(0x8086, 0x4f92), + .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE}, /* Alderlake-S */ { PCI_DEVICE(0x8086, 0x7ad0), .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE}, diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 65d2c5539919..98633d2684de 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -4382,6 +4382,7 @@ HDA_CODEC_ENTRY(0x80862814, "DG1 HDMI", patch_i915_tgl_hdmi), HDA_CODEC_ENTRY(0x80862815, "Alderlake HDMI", patch_i915_tgl_hdmi), HDA_CODEC_ENTRY(0x8086281c, "Alderlake-P HDMI", patch_i915_tgl_hdmi), HDA_CODEC_ENTRY(0x80862816, "Rocketlake HDMI", patch_i915_tgl_hdmi), +HDA_CODEC_ENTRY(0x80862819, "DG2 HDMI", patch_i915_tgl_hdmi), HDA_CODEC_ENTRY(0x8086281a, "Jasperlake HDMI", patch_i915_icl_hdmi), HDA_CODEC_ENTRY(0x8086281b, "Elkhartlake HDMI", patch_i915_icl_hdmi), HDA_CODEC_ENTRY(0x80862880, "CedarTrail HDMI", patch_generic_hdmi), base-commit: d7aca8d8f548570f650d9b1dfedf6902f56f2bce -- 2.34.1

3 3

[PATCH][next] ASoC: q6asm: use kcalloc() instead of kzalloc()
by Gustavo A. R. Silva 28 Jul '22

28 Jul '22

Use 2-factor multiplication argument form kcalloc() instead of kzalloc(). Link: https://github.com/KSPP/linux/issues/162 Signed-off-by: Gustavo A. R. Silva <gustavoars(a)kernel.org> --- sound/soc/qcom/qdsp6/q6asm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/qcom/qdsp6/q6asm.c b/sound/soc/qcom/qdsp6/q6asm.c index 9251d8548965..195780f75d05 100644 --- a/sound/soc/qcom/qdsp6/q6asm.c +++ b/sound/soc/qcom/qdsp6/q6asm.c @@ -513,7 +513,7 @@ int q6asm_map_memory_regions(unsigned int dir, struct audio_client *ac, return 0; } - buf = kzalloc(((sizeof(struct audio_buffer)) * periods), GFP_ATOMIC); + buf = kcalloc(periods, sizeof(*buf), GFP_ATOMIC); if (!buf) { spin_unlock_irqrestore(&ac->lock, flags); return -ENOMEM; -- 2.27.0

3 2

[PATCH] ALSA: usb-audio: Always apply the hw constraints for implicit fb sync
by Takashi Iwai 22 Apr '22

22 Apr '22

Since the commit 5a6c3e11c9c9 ("ALSA: usb-audio: Add hw constraint for implicit fb sync"), we apply the hw constraints for the implicit feedback sync to make the secondary open aligned with the already opened stream setup. This change assumed that the secondary open is performed after the first stream has been already set up, and adds the hw constraints to sync with the first stream's parameters only when the EP setup for the first stream was confirmed at the open time. However, most of applications handling the full-duplex operations do open both playback and capture streams at first, then set up both streams. This results in skipping the additional hw constraints since the counter-part stream hasn't been set up yet at the open of the second stream, and it eventually leads to "incompatible EP" error in the end. This patch corrects the behavior by always applying the hw constraints for the implicit fb sync. The hw constraint rules are defined so that they check the sync EP dynamically at each invocation, instead. This covers the concurrent stream setups better and lets the hw refine calls resolving to the right configuration. Also this patch corrects a minor error that has existed in the debug print that isn't built as default. Fixes: 5a6c3e11c9c9 ("ALSA: usb-audio: Add hw constraint for implicit fb sync") Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- This patched was developed primarily as an attemp for the regression of Pioneer devices. Although Pioneer devices have still some issues after this patch, this one itself should be good for all devices in general. Keith, Dylan, could you verify that this doesn't break things for your devices? sound/usb/pcm.c | 171 ++++++++++++++++++++++++++++++------------------ 1 file changed, 108 insertions(+), 63 deletions(-) diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index 56079901769f..f71965bf815f 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -663,7 +663,7 @@ static int hw_check_valid_format(struct snd_usb_substream *subs, check_fmts.bits[1] = (u32)(fp->formats >> 32); snd_mask_intersect(&check_fmts, fmts); if (snd_mask_empty(&check_fmts)) { - hwc_debug(" > check: no supported format %d\n", fp->format); + hwc_debug(" > check: no supported format 0x%llx\n", fp->formats); return 0; } /* check the channels */ @@ -775,24 +775,11 @@ static int hw_rule_channels(struct snd_pcm_hw_params *params, return apply_hw_params_minmax(it, rmin, rmax); } -static int hw_rule_format(struct snd_pcm_hw_params *params, - struct snd_pcm_hw_rule *rule) +static int apply_hw_params_format_bits(struct snd_mask *fmt, u64 fbits) { - struct snd_usb_substream *subs = rule->private; - const struct audioformat *fp; - struct snd_mask *fmt = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT); - u64 fbits; u32 oldbits[2]; int changed; - hwc_debug("hw_rule_format: %x:%x\n", fmt->bits[0], fmt->bits[1]); - fbits = 0; - list_for_each_entry(fp, &subs->fmt_list, list) { - if (!hw_check_valid_format(subs, params, fp)) - continue; - fbits |= fp->formats; - } - oldbits[0] = fmt->bits[0]; oldbits[1] = fmt->bits[1]; fmt->bits[0] &= (u32)fbits; @@ -806,6 +793,24 @@ static int hw_rule_format(struct snd_pcm_hw_params *params, return changed; } +static int hw_rule_format(struct snd_pcm_hw_params *params, + struct snd_pcm_hw_rule *rule) +{ + struct snd_usb_substream *subs = rule->private; + const struct audioformat *fp; + struct snd_mask *fmt = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT); + u64 fbits; + + hwc_debug("hw_rule_format: %x:%x\n", fmt->bits[0], fmt->bits[1]); + fbits = 0; + list_for_each_entry(fp, &subs->fmt_list, list) { + if (!hw_check_valid_format(subs, params, fp)) + continue; + fbits |= fp->formats; + } + return apply_hw_params_format_bits(fmt, fbits); +} + static int hw_rule_period_time(struct snd_pcm_hw_params *params, struct snd_pcm_hw_rule *rule) { @@ -833,64 +838,92 @@ static int hw_rule_period_time(struct snd_pcm_hw_params *params, return apply_hw_params_minmax(it, pmin, UINT_MAX); } -/* apply PCM hw constraints from the concurrent sync EP */ -static int apply_hw_constraint_from_sync(struct snd_pcm_runtime *runtime, - struct snd_usb_substream *subs) +/* get the EP or the sync EP for implicit fb when it's already set up */ +static const struct snd_usb_endpoint * +get_sync_ep_from_substream(struct snd_usb_substream *subs) { struct snd_usb_audio *chip = subs->stream->chip; - struct snd_usb_endpoint *ep; const struct audioformat *fp; - int err; + const struct snd_usb_endpoint *ep; list_for_each_entry(fp, &subs->fmt_list, list) { ep = snd_usb_get_endpoint(chip, fp->endpoint); if (ep && ep->cur_rate) - goto found; + return ep; if (!fp->implicit_fb) continue; /* for the implicit fb, check the sync ep as well */ ep = snd_usb_get_endpoint(chip, fp->sync_ep); if (ep && ep->cur_rate) - goto found; + return ep; } - return 0; + return NULL; +} + +/* additional hw constraints for implicit feedback mode */ +static int hw_rule_format_implicit_fb(struct snd_pcm_hw_params *params, + struct snd_pcm_hw_rule *rule) +{ + struct snd_usb_substream *subs = rule->private; + const struct snd_usb_endpoint *ep; + struct snd_mask *fmt = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT); - found: - if (!find_format(&subs->fmt_list, ep->cur_format, ep->cur_rate, - ep->cur_channels, false, NULL)) { - usb_audio_dbg(chip, "EP 0x%x being used, but not applicable\n", - ep->ep_num); + ep = get_sync_ep_from_substream(subs); + if (!ep) return 0; - } - usb_audio_dbg(chip, "EP 0x%x being used, using fixed params:\n", - ep->ep_num); - usb_audio_dbg(chip, "rate=%d, period_size=%d, periods=%d\n", - ep->cur_rate, ep->cur_period_frames, - ep->cur_buffer_periods); + hwc_debug("applying %s\n", __func__); + return apply_hw_params_format_bits(fmt, pcm_format_to_bits(ep->cur_format)); +} - runtime->hw.formats = subs->formats; - runtime->hw.rate_min = runtime->hw.rate_max = ep->cur_rate; - runtime->hw.rates = SNDRV_PCM_RATE_KNOT; - runtime->hw.periods_min = runtime->hw.periods_max = - ep->cur_buffer_periods; +static int hw_rule_rate_implicit_fb(struct snd_pcm_hw_params *params, + struct snd_pcm_hw_rule *rule) +{ + struct snd_usb_substream *subs = rule->private; + const struct snd_usb_endpoint *ep; + struct snd_interval *it; - err = snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS, - hw_rule_channels, subs, - SNDRV_PCM_HW_PARAM_FORMAT, - SNDRV_PCM_HW_PARAM_RATE, - -1); - if (err < 0) - return err; + ep = get_sync_ep_from_substream(subs); + if (!ep) + return 0; - err = snd_pcm_hw_constraint_minmax(runtime, - SNDRV_PCM_HW_PARAM_PERIOD_SIZE, - ep->cur_period_frames, - ep->cur_period_frames); - if (err < 0) - return err; + hwc_debug("applying %s\n", __func__); + it = hw_param_interval(params, SNDRV_PCM_HW_PARAM_RATE); + return apply_hw_params_minmax(it, ep->cur_rate, ep->cur_rate); +} + +static int hw_rule_period_size_implicit_fb(struct snd_pcm_hw_params *params, + struct snd_pcm_hw_rule *rule) +{ + struct snd_usb_substream *subs = rule->private; + const struct snd_usb_endpoint *ep; + struct snd_interval *it; - return 1; /* notify the finding */ + ep = get_sync_ep_from_substream(subs); + if (!ep) + return 0; + + hwc_debug("applying %s\n", __func__); + it = hw_param_interval(params, SNDRV_PCM_HW_PARAM_PERIOD_SIZE); + return apply_hw_params_minmax(it, ep->cur_period_frames, + ep->cur_period_frames); +} + +static int hw_rule_periods_implicit_fb(struct snd_pcm_hw_params *params, + struct snd_pcm_hw_rule *rule) +{ + struct snd_usb_substream *subs = rule->private; + const struct snd_usb_endpoint *ep; + struct snd_interval *it; + + ep = get_sync_ep_from_substream(subs); + if (!ep) + return 0; + + hwc_debug("applying %s\n", __func__); + it = hw_param_interval(params, SNDRV_PCM_HW_PARAM_PERIODS); + return apply_hw_params_minmax(it, ep->cur_buffer_periods, + ep->cur_buffer_periods); } /* @@ -899,20 +932,11 @@ static int apply_hw_constraint_from_sync(struct snd_pcm_runtime *runtime, static int setup_hw_info(struct snd_pcm_runtime *runtime, struct snd_usb_substream *subs) { - struct snd_usb_audio *chip = subs->stream->chip; const struct audioformat *fp; unsigned int pt, ptmin; int param_period_time_if_needed = -1; int err; - mutex_lock(&chip->mutex); - err = apply_hw_constraint_from_sync(runtime, subs); - mutex_unlock(&chip->mutex); - if (err < 0) - return err; - if (err > 0) /* found the matching? */ - goto add_extra_rules; - runtime->hw.formats = subs->formats; runtime->hw.rate_min = 0x7fffffff; @@ -964,7 +988,6 @@ static int setup_hw_info(struct snd_pcm_runtime *runtime, struct snd_usb_substre if (err < 0) return err; -add_extra_rules: err = snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS, hw_rule_channels, subs, SNDRV_PCM_HW_PARAM_FORMAT, @@ -993,6 +1016,28 @@ static int setup_hw_info(struct snd_pcm_runtime *runtime, struct snd_usb_substre return err; } + /* additional hw constraints for implicit fb */ + err = snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_FORMAT, + hw_rule_format_implicit_fb, subs, + SNDRV_PCM_HW_PARAM_FORMAT, -1); + if (err < 0) + return err; + err = snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_RATE, + hw_rule_rate_implicit_fb, subs, + SNDRV_PCM_HW_PARAM_RATE, -1); + if (err < 0) + return err; + err = snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_SIZE, + hw_rule_period_size_implicit_fb, subs, + SNDRV_PCM_HW_PARAM_PERIOD_SIZE, -1); + if (err < 0) + return err; + err = snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_PERIODS, + hw_rule_periods_implicit_fb, subs, + SNDRV_PCM_HW_PARAM_PERIODS, -1); + if (err < 0) + return err; + return 0; } -- 2.26.2

2 1

[alsa-devel] [PATCH 00/46] ARM: pxa: towards multiplatform support
by Arnd Bergmann 19 Apr '22

19 Apr '22

Hi PXA maintainers, I'm in the process of getting the old ARM platforms to all build in a single kernel. The largest part of that work is changing all the device drivers to no longer require mach/*.h header files. This series does it for arch/pxa/. As with the omap1 and s3c24xx series I sent before, I don't expect this all to be correct in the first version, though a lot of the patches are fairly simple and I did exhaustive compile-time testing on them. Please test if you have the hardware, or review! Arnd Bcc: Alexandre Belloni <alexandre.belloni(a)bootlin.com> Bcc: alsa-devel(a)alsa-project.org Bcc: Bartlomiej Zolnierkiewicz <b.zolnierkie(a)samsung.com> Bcc: Brian Norris <computersforpeace(a)gmail.com> Bcc: Daniel Thompson <daniel.thompson(a)linaro.org> Bcc: David Woodhouse <dwmw2(a)infradead.org> Bcc: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Bcc: Dominik Brodowski <linux(a)dominikbrodowski.net> Bcc: dri-devel(a)lists.freedesktop.org Bcc: Felipe Balbi <balbi(a)kernel.org> Bcc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Bcc: Guenter Roeck <linux(a)roeck-us.net> Bcc: Jacek Anaszewski <jacek.anaszewski(a)gmail.com> Bcc: Jens Axboe <axboe(a)kernel.dk> Bcc: Jingoo Han <jingoohan1(a)gmail.com> Bcc: Jonathan Cameron <jic23(a)cam.ac.uk> Bcc: Lee Jones <lee.jones(a)linaro.org> Bcc: Lubomir Rintel <lkundrak(a)v3.sk> Bcc: Marek Vasut <marek.vasut(a)gmail.com> Bcc: Mark Brown <broonie(a)kernel.org> Bcc: Michael Turquette <mturquette(a)baylibre.com> Bcc: Miquel Raynal <miquel.raynal(a)bootlin.com> Bcc: Paul Parsons <lost.distance(a)yahoo.com> Bcc: Pavel Machek <pavel(a)ucw.cz> Bcc: Philipp Zabel <philipp.zabel(a)gmail.com> Bcc: "Rafael J. Wysocki" <rjw(a)rjwysocki.net> Bcc: Richard Weinberger <richard(a)nod.at> Bcc: Russell King <linux(a)armlinux.org.uk> Bcc: Sebastian Reichel <sre(a)kernel.org> Bcc: Sergey Lapin <slapin(a)ossfans.org> Bcc: Stephen Boyd <sboyd(a)kernel.org> Bcc: Tomas Cech <sleep_walker(a)suse.com> Bcc: Ulf Hansson <ulf.hansson(a)linaro.org> Bcc: Vignesh Raghavendra <vigneshr(a)ti.com> Bcc: Viresh Kumar <viresh.kumar(a)linaro.org> Bcc: Wim Van Sebroeck <wim(a)linux-watchdog.org> Cc: linux-clk(a)vger.kernel.org Cc: linux-fbdev(a)vger.kernel.org Cc: linux-ide(a)vger.kernel.org Cc: linux-input(a)vger.kernel.org Cc: linux-leds(a)vger.kernel.org Cc: linux-mmc(a)vger.kernel.org Cc: linux-mtd(a)lists.infradead.org Cc: linux-pm(a)vger.kernel.org Cc: linux-rtc(a)vger.kernel.org Cc: linux-usb(a)vger.kernel.org Cc: linux-watchdog(a)vger.kernel.org Arnd Bergmann (46): ARM: pxa: split mach/generic.h ARM: pxa: make mainstone.h private ARM: pxa: make mach/regs-uart.h private ARM: pxa: remove mach/dma.h ARM: pxa: split up mach/hardware.h ARM: pxa: stop using mach/bitfield.h ARM: pxa: move mach/sound.h to linux/platform_data/ ARM: pxa: move regs-lcd.h into driver watchdog: sa1100: use platform device registration ARM: pxa: pxa2xx-ac97-lib: use IRQ resource ARM: pxa: cmx270: use platform device for nand ARM: pxa: make addr-map.h header local ARM: pxa: move pcmcia board data into mach-pxa ARM: pxa: use pdev resource for palmld mmio ARM: pxa: maybe fix gpio lookup tables ARM: pxa: tosa: use gpio descriptor for audio ARM: pxa: poodle: use platform data for poodle asoc driver ARM: pxa: corgi: use gpio descriptors for audio ARM: pxa: hx4700: use gpio descriptors for audio ARM: pxa: lubbock: pass udc irqs as resource ARM: pxa: spitz: use gpio descriptors for audio ARM: pxa: eseries: use gpio lookup for audio ARM: pxa: z2: use gpio lookup for audio device ARM: pxa: magician: use platform driver for audio ARM: pxa: mainstone-wm97xx: use gpio lookup table ARM: pxa: zylonite: use gpio lookup instead mfp header input: touchscreen: mainstone: fix pxa2xx+pxa3xx configuration input: touchscreen: mainstone: sync with zylonite driver Input: touchscreen: use wrapper for pxa2xx ac97 registers SoC: pxa: use pdev resource for FIFO regs ASoC: pxa: ac97: use normal MMIO accessors ASoC: pxa: i2s: use normal MMIO accessors ARM: pxa: pcmcia: move smemc configuration back to arch ARM: pxa: remove get_clk_frequency_khz() cpufreq: pxa3: move clk register access to clk driver ARM: pxa: move smemc register access from clk to platform ARM: pxa: move clk register definitions to driver video: backlight: tosa: use gpio lookup table power: tosa: simplify probe function ARM: pxa: tosa: use gpio lookup for battery ARM: pxa: move it8152 PCI support into machine ARM: pxa: remove unused mach/bitfield.h ARM: pxa: pci-it8152: add platform checks ARM: mmp: remove tavorevb board support ARM: mmp: rename pxa_register_device ARM: pxa: move plat-pxa to drivers/soc/ arch/arm/Kconfig | 9 - arch/arm/Makefile | 1 - arch/arm/common/Makefile | 1 - arch/arm/common/locomo.c | 1 - arch/arm/common/sa1111.c | 5 +- arch/arm/include/asm/hardware/sa1111.h | 2 - arch/arm/mach-mmp/Kconfig | 10 +- arch/arm/mach-mmp/Makefile | 1 - arch/arm/mach-mmp/devices.c | 2 +- arch/arm/mach-mmp/devices.h | 10 +- arch/arm/mach-mmp/mfp.h | 2 +- arch/arm/mach-mmp/mmp2.h | 48 ++--- arch/arm/mach-mmp/pxa168.h | 60 +++--- arch/arm/mach-mmp/pxa910.h | 38 ++-- arch/arm/mach-mmp/tavorevb.c | 113 ----------- arch/arm/mach-mmp/ttc_dkb.c | 6 +- arch/arm/mach-pxa/Kconfig | 8 +- arch/arm/mach-pxa/Makefile | 22 +- .../mach-pxa/{include/mach => }/addr-map.h | 0 .../arm/mach-pxa/balloon3-pcmcia.c | 4 +- arch/arm/mach-pxa/balloon3.c | 4 +- .../mach-pxa/{include/mach => }/balloon3.h | 2 +- arch/arm/mach-pxa/cm-x270.c | 25 +++ arch/arm/mach-pxa/cm-x2xx-pci.c | 2 +- arch/arm/mach-pxa/cm-x2xx.c | 7 +- arch/arm/mach-pxa/cm-x300.c | 12 +- .../arm/mach-pxa/cm_x255-pcmcia.c | 2 +- .../arm/mach-pxa/cm_x270-pcmcia.c | 2 +- .../arm/mach-pxa/cm_x2xx-pcmcia.c | 2 +- arch/arm/mach-pxa/colibri-evalboard.c | 1 - .../arm/mach-pxa/colibri-pcmcia.c | 2 +- arch/arm/mach-pxa/colibri-pxa270-income.c | 1 - arch/arm/mach-pxa/colibri-pxa270.c | 2 +- arch/arm/mach-pxa/colibri-pxa300.c | 3 +- arch/arm/mach-pxa/colibri-pxa320.c | 2 +- arch/arm/mach-pxa/colibri-pxa3xx.c | 1 - arch/arm/mach-pxa/corgi.c | 23 ++- arch/arm/mach-pxa/{include/mach => }/corgi.h | 2 +- arch/arm/mach-pxa/corgi_pm.c | 3 +- arch/arm/mach-pxa/csb726.c | 3 +- arch/arm/mach-pxa/devices.c | 15 +- .../arm/mach-pxa/e740-pcmcia.c | 2 +- arch/arm/mach-pxa/em-x270.c | 2 +- arch/arm/mach-pxa/eseries.c | 34 +++- arch/arm/mach-pxa/ezx.c | 1 - arch/arm/mach-pxa/generic.c | 78 ++++++-- arch/arm/mach-pxa/generic.h | 9 - arch/arm/mach-pxa/gumstix.c | 1 - .../arm/mach-pxa/hx4700-pcmcia.c | 4 +- arch/arm/mach-pxa/hx4700.c | 18 +- arch/arm/mach-pxa/{include/mach => }/hx4700.h | 2 +- arch/arm/mach-pxa/idp.c | 2 - arch/arm/mach-pxa/include/mach/bitfield.h | 114 ----------- arch/arm/mach-pxa/include/mach/dma.h | 17 -- arch/arm/mach-pxa/include/mach/generic.h | 1 - arch/arm/mach-pxa/include/mach/mfp.h | 2 +- arch/arm/mach-pxa/include/mach/pxa-regs.h | 52 +++++ arch/arm/mach-pxa/include/mach/pxa2xx-regs.h | 47 +---- arch/arm/mach-pxa/include/mach/pxa3xx-regs.h | 71 +------ arch/arm/mach-pxa/include/mach/regs-ost.h | 4 +- arch/arm/mach-pxa/include/mach/reset.h | 2 +- arch/arm/mach-pxa/include/mach/tosa.h | 15 -- arch/arm/mach-pxa/irq.c | 3 +- arch/arm/mach-pxa/littleton.c | 1 - arch/arm/mach-pxa/lpd270.c | 4 +- arch/arm/mach-pxa/lubbock.c | 15 +- .../arm/mach-pxa/{include/mach => }/lubbock.h | 2 - arch/arm/mach-pxa/magician.c | 54 ++++- arch/arm/mach-pxa/mainstone.c | 15 +- .../mach-pxa/{include/mach => }/mainstone.h | 2 - arch/arm/mach-pxa/mfp-pxa2xx.c | 1 + arch/arm/mach-pxa/mfp-pxa2xx.h | 2 +- arch/arm/mach-pxa/mfp-pxa3xx.c | 1 - arch/arm/mach-pxa/mfp-pxa3xx.h | 2 +- arch/arm/mach-pxa/mioa701.c | 2 +- arch/arm/mach-pxa/mxm8x10.c | 8 +- arch/arm/mach-pxa/palm27x.c | 2 +- .../arm/mach-pxa/palmld-pcmcia.c | 5 +- arch/arm/mach-pxa/palmld.c | 23 ++- arch/arm/mach-pxa/{include/mach => }/palmld.h | 2 +- arch/arm/mach-pxa/palmt5.c | 11 +- .../arm/mach-pxa/palmtc-pcmcia.c | 4 +- arch/arm/mach-pxa/palmtc.c | 4 +- arch/arm/mach-pxa/{include/mach => }/palmtc.h | 2 +- arch/arm/mach-pxa/palmte2.c | 2 +- arch/arm/mach-pxa/palmtreo.c | 2 +- .../arm/mach-pxa/palmtx-pcmcia.c | 4 +- arch/arm/mach-pxa/palmtx.c | 13 +- arch/arm/mach-pxa/{include/mach => }/palmtx.h | 2 +- arch/arm/mach-pxa/palmz72.c | 2 +- .../it8152.c => mach-pxa/pci-it8152.c} | 25 ++- .../it8152.h => mach-pxa/pci-it8152.h} | 2 - arch/arm/mach-pxa/pcm990-baseboard.c | 2 +- arch/arm/mach-pxa/poodle.c | 31 ++- arch/arm/mach-pxa/{include/mach => }/poodle.h | 4 +- arch/arm/mach-pxa/pxa-regs.h | 1 + arch/arm/mach-pxa/pxa25x.c | 6 +- arch/arm/mach-pxa/pxa25x.h | 2 +- arch/arm/mach-pxa/pxa27x-udc.h | 2 + arch/arm/mach-pxa/pxa27x.c | 6 +- arch/arm/mach-pxa/pxa27x.h | 2 +- arch/arm/mach-pxa/pxa2xx.c | 1 - arch/arm/mach-pxa/pxa300.c | 1 + arch/arm/mach-pxa/pxa320.c | 1 + arch/arm/mach-pxa/pxa3xx-ulpi.c | 2 +- arch/arm/mach-pxa/pxa3xx.c | 11 +- arch/arm/mach-pxa/pxa3xx.h | 2 +- arch/arm/mach-pxa/pxa930.c | 1 + arch/arm/mach-pxa/regs-rtc.h | 2 +- arch/arm/mach-pxa/regs-u2d.h | 2 - .../mach-pxa/{include/mach => }/regs-uart.h | 2 + arch/arm/mach-pxa/reset.c | 3 - arch/arm/mach-pxa/sleep.S | 5 +- arch/arm/mach-pxa/smemc.c | 11 +- arch/arm/mach-pxa/spitz.c | 33 ++- arch/arm/mach-pxa/{include/mach => }/spitz.h | 2 +- arch/arm/mach-pxa/spitz_pm.c | 3 +- arch/arm/mach-pxa/standby.S | 1 - .../arm/mach-pxa/stargate2-pcmcia.c | 2 +- arch/arm/mach-pxa/tosa.c | 63 +++++- .../arm/mach-pxa/trizeps4-pcmcia.c | 4 +- arch/arm/mach-pxa/trizeps4.c | 4 +- .../mach-pxa/{include/mach => }/trizeps4.h | 3 +- .../arm/mach-pxa/viper-pcmcia.c | 6 +- .../arm/mach-pxa/viper-pcmcia.h | 0 arch/arm/mach-pxa/viper.c | 8 +- .../arm/mach-pxa/vpac270-pcmcia.c | 4 +- arch/arm/mach-pxa/vpac270.c | 4 +- .../arm/mach-pxa/{include/mach => }/vpac270.h | 0 arch/arm/mach-pxa/xcep.c | 2 +- arch/arm/mach-pxa/z2.c | 11 + arch/arm/mach-pxa/zeus.c | 6 +- arch/arm/mach-pxa/zylonite.c | 34 +++- arch/arm/mach-pxa/zylonite.h | 2 + arch/arm/mach-pxa/zylonite_pxa300.c | 1 + arch/arm/mach-pxa/zylonite_pxa320.c | 1 + arch/arm/mach-sa1100/generic.c | 6 +- arch/arm/mach-sa1100/include/mach/reset.h | 1 - drivers/ata/pata_palmld.c | 3 +- drivers/clk/pxa/clk-pxa.c | 8 +- drivers/clk/pxa/clk-pxa.h | 9 +- drivers/clk/pxa/clk-pxa25x.c | 46 ++--- drivers/clk/pxa/clk-pxa27x.c | 68 +++---- drivers/clk/pxa/clk-pxa3xx.c | 139 +++++++++++-- drivers/cpufreq/pxa2xx-cpufreq.c | 6 +- drivers/cpufreq/pxa3xx-cpufreq.c | 65 +++--- drivers/input/mouse/pxa930_trkball.c | 1 - drivers/input/touchscreen/Kconfig | 2 + drivers/input/touchscreen/mainstone-wm97xx.c | 123 ++++++------ drivers/input/touchscreen/zylonite-wm97xx.c | 34 ++-- drivers/leds/leds-locomo.c | 1 - drivers/mmc/host/pxamci.c | 2 +- drivers/mtd/maps/pxa2xx-flash.c | 2 - drivers/mtd/nand/raw/cmx270_nand.c | 89 +++------ drivers/pcmcia/Makefile | 16 -- drivers/pcmcia/pxa2xx_base.c | 48 ++--- drivers/pcmcia/pxa2xx_sharpsl.c | 3 +- drivers/pcmcia/sa1111_generic.c | 1 - drivers/pcmcia/sa1111_lubbock.c | 1 - drivers/pcmcia/soc_common.c | 2 - drivers/pcmcia/soc_common.h | 120 +---------- drivers/power/supply/tosa_battery.c | 189 ++++++++++-------- drivers/rtc/rtc-pxa.c | 2 - drivers/soc/Kconfig | 1 + drivers/soc/Makefile | 1 + .../arm/plat-pxa => drivers/soc/pxa}/Kconfig | 5 +- .../arm/plat-pxa => drivers/soc/pxa}/Makefile | 4 - {arch/arm/plat-pxa => drivers/soc/pxa}/mfp.c | 2 +- {arch/arm/plat-pxa => drivers/soc/pxa}/ssp.c | 0 drivers/usb/gadget/udc/pxa25x_udc.c | 37 ++-- drivers/usb/gadget/udc/pxa25x_udc.h | 7 +- drivers/usb/host/ohci-pxa27x.c | 3 +- drivers/video/backlight/tosa_bl.c | 10 +- drivers/video/backlight/tosa_bl.h | 8 + drivers/video/backlight/tosa_lcd.c | 28 ++- .../video/fbdev/pxa3xx-regs.h | 24 +-- drivers/video/fbdev/pxafb.c | 4 +- drivers/watchdog/sa1100_wdt.c | 88 +++++--- include/linux/clk/pxa.h | 16 ++ include/linux/platform_data/asoc-poodle.h | 16 ++ .../linux/platform_data/asoc-pxa.h | 4 +- include/linux/platform_data/video-pxafb.h | 22 +- .../hardware.h => include/linux/soc/pxa/cpu.h | 61 +----- .../plat => include/linux/soc/pxa}/mfp.h | 6 +- include/linux/soc/pxa/smemc.h | 13 ++ include/pcmcia/soc_common.h | 125 ++++++++++++ include/sound/pxa2xx-lib.h | 4 + sound/arm/pxa2xx-ac97-lib.c | 145 +++++++++----- .../arm/pxa2xx-ac97-regs.h | 42 ++-- sound/arm/pxa2xx-ac97.c | 3 +- sound/soc/pxa/corgi.c | 42 ++-- sound/soc/pxa/e740_wm9705.c | 37 ++-- sound/soc/pxa/e750_wm9705.c | 33 ++- sound/soc/pxa/e800_wm9712.c | 33 ++- sound/soc/pxa/em-x270.c | 2 +- sound/soc/pxa/hx4700.c | 34 ++-- sound/soc/pxa/magician.c | 141 ++++--------- sound/soc/pxa/mioa701_wm9713.c | 2 +- sound/soc/pxa/palm27x.c | 2 +- sound/soc/pxa/poodle.c | 51 ++--- sound/soc/pxa/pxa2xx-ac97.c | 24 ++- sound/soc/pxa/pxa2xx-i2s.c | 112 ++++++----- sound/soc/pxa/spitz.c | 58 +++--- sound/soc/pxa/tosa.c | 18 +- sound/soc/pxa/z2.c | 8 +- 205 files changed, 1916 insertions(+), 1795 deletions(-) delete mode 100644 arch/arm/mach-mmp/tavorevb.c rename arch/arm/mach-pxa/{include/mach => }/addr-map.h (100%) rename drivers/pcmcia/pxa2xx_balloon3.c => arch/arm/mach-pxa/balloon3-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/balloon3.h (99%) rename drivers/pcmcia/pxa2xx_cm_x255.c => arch/arm/mach-pxa/cm_x255-pcmcia.c (98%) rename drivers/pcmcia/pxa2xx_cm_x270.c => arch/arm/mach-pxa/cm_x270-pcmcia.c (98%) rename drivers/pcmcia/pxa2xx_cm_x2xx.c => arch/arm/mach-pxa/cm_x2xx-pcmcia.c (96%) rename drivers/pcmcia/pxa2xx_colibri.c => arch/arm/mach-pxa/colibri-pcmcia.c (99%) rename arch/arm/mach-pxa/{include/mach => }/corgi.h (98%) rename drivers/pcmcia/pxa2xx_e740.c => arch/arm/mach-pxa/e740-pcmcia.c (98%) rename drivers/pcmcia/pxa2xx_hx4700.c => arch/arm/mach-pxa/hx4700-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/hx4700.h (99%) delete mode 100644 arch/arm/mach-pxa/include/mach/bitfield.h delete mode 100644 arch/arm/mach-pxa/include/mach/dma.h delete mode 100644 arch/arm/mach-pxa/include/mach/generic.h create mode 100644 arch/arm/mach-pxa/include/mach/pxa-regs.h rename arch/arm/mach-pxa/{include/mach => }/lubbock.h (97%) rename arch/arm/mach-pxa/{include/mach => }/mainstone.h (99%) rename drivers/pcmcia/pxa2xx_palmld.c => arch/arm/mach-pxa/palmld-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/palmld.h (98%) rename drivers/pcmcia/pxa2xx_palmtc.c => arch/arm/mach-pxa/palmtc-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/palmtc.h (98%) rename drivers/pcmcia/pxa2xx_palmtx.c => arch/arm/mach-pxa/palmtx-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/palmtx.h (98%) rename arch/arm/{common/it8152.c => mach-pxa/pci-it8152.c} (95%) rename arch/arm/{include/asm/hardware/it8152.h => mach-pxa/pci-it8152.h} (98%) rename arch/arm/mach-pxa/{include/mach => }/poodle.h (97%) create mode 100644 arch/arm/mach-pxa/pxa-regs.h rename arch/arm/mach-pxa/{include/mach => }/regs-uart.h (99%) rename arch/arm/mach-pxa/{include/mach => }/spitz.h (99%) rename drivers/pcmcia/pxa2xx_stargate2.c => arch/arm/mach-pxa/stargate2-pcmcia.c (99%) rename drivers/pcmcia/pxa2xx_trizeps4.c => arch/arm/mach-pxa/trizeps4-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/trizeps4.h (98%) rename drivers/pcmcia/pxa2xx_viper.c => arch/arm/mach-pxa/viper-pcmcia.c (97%) rename include/linux/platform_data/pcmcia-pxa2xx_viper.h => arch/arm/mach-pxa/viper-pcmcia.h (100%) rename drivers/pcmcia/pxa2xx_vpac270.c => arch/arm/mach-pxa/vpac270-pcmcia.c (98%) rename arch/arm/mach-pxa/{include/mach => }/vpac270.h (100%) rename {arch/arm/plat-pxa => drivers/soc/pxa}/Kconfig (83%) rename {arch/arm/plat-pxa => drivers/soc/pxa}/Makefile (51%) rename {arch/arm/plat-pxa => drivers/soc/pxa}/mfp.c (99%) rename {arch/arm/plat-pxa => drivers/soc/pxa}/ssp.c (100%) create mode 100644 drivers/video/backlight/tosa_bl.h rename arch/arm/mach-pxa/include/mach/regs-lcd.h => drivers/video/fbdev/pxa3xx-regs.h (90%) create mode 100644 include/linux/clk/pxa.h create mode 100644 include/linux/platform_data/asoc-poodle.h rename arch/arm/mach-pxa/include/mach/audio.h => include/linux/platform_data/asoc-pxa.h (93%) rename arch/arm/mach-pxa/include/mach/hardware.h => include/linux/soc/pxa/cpu.h (75%) rename {arch/arm/plat-pxa/include/plat => include/linux/soc/pxa}/mfp.h (98%) create mode 100644 include/linux/soc/pxa/smemc.h create mode 100644 include/pcmcia/soc_common.h rename arch/arm/mach-pxa/include/mach/regs-ac97.h => sound/arm/pxa2xx-ac97-regs.h (71%) -- 2.20.0

9 53

[PATCH] slimbus: qcom-ngd-ctrl: Use platform_get_irq() to get the interrupt
by Lad Prabhakar 11 Mar '22

11 Mar '22

platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj(a)bp.renesas.com> --- Hi, Dropping usage of platform_get_resource() was agreed based on the discussion [0]. [0] https://patchwork.kernel.org/project/linux-renesas-soc/ patch/20211209001056.29774-1-prabhakar.mahadev-lad.rj(a)bp.renesas.com/ Cheers, Prabhakar --- drivers/slimbus/qcom-ngd-ctrl.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/slimbus/qcom-ngd-ctrl.c b/drivers/slimbus/qcom-ngd-ctrl.c index 7040293c2ee8..0f29a08b4c09 100644 --- a/drivers/slimbus/qcom-ngd-ctrl.c +++ b/drivers/slimbus/qcom-ngd-ctrl.c @@ -1526,13 +1526,11 @@ static int qcom_slim_ngd_ctrl_probe(struct platform_device *pdev) if (IS_ERR(ctrl->base)) return PTR_ERR(ctrl->base); - res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!res) { - dev_err(&pdev->dev, "no slimbus IRQ resource\n"); - return -ENODEV; - } + ret = platform_get_irq(pdev, 0); + if (ret < 0) + return ret; - ret = devm_request_irq(dev, res->start, qcom_slim_ngd_interrupt, + ret = devm_request_irq(dev, ret, qcom_slim_ngd_interrupt, IRQF_TRIGGER_HIGH, "slim-ngd", ctrl); if (ret) { dev_err(&pdev->dev, "request IRQ failed\n"); -- 2.17.1

6 9

[PATCH v2] ASoC: soc-compress: prevent the potentially use of null pointer
by Jiasheng Jiang 02 Mar '22

02 Mar '22

There is one call trace that snd_soc_register_card() ->snd_soc_bind_card()->soc_init_pcm_runtime() ->snd_soc_dai_compress_new()->snd_soc_new_compress(). In the trace the 'codec_dai' transfers from card->dai_link, and we can see from the snd_soc_add_pcm_runtime() in snd_soc_bind_card() that, if value of card->dai_link->num_codecs is 0, then 'codec_dai' could be null pointer caused by index out of bound in 'asoc_rtd_to_codec(rtd, 0)'. And snd_soc_register_card() is called by various platforms. Therefore, it is better to add the check in the case of misusing. And because 'cpu_dai' has already checked in soc_init_pcm_runtime(), there is no need to check again. Adding the check as follow, then if 'codec_dai' is null, snd_soc_new_compress() will not pass through the check 'if (playback + capture != 1)', avoiding the leftover use of 'codec_dai'. Fixes: 467fece ("ASoC: soc-dai: move snd_soc_dai_stream_valid() to soc-dai.c") Signed-off-by: Jiasheng Jiang <jiasheng(a)iscas.ac.cn> Reported-by: kernel test robot <lkp(a)intel.com> Reported-by: Dan Carpenter <dan.carpenter(a)oracle.com> --- sound/soc/soc-compress.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/sound/soc/soc-compress.c b/sound/soc/soc-compress.c index b4f5935..67c3df1 100644 --- a/sound/soc/soc-compress.c +++ b/sound/soc/soc-compress.c @@ -535,12 +535,14 @@ int snd_soc_new_compress(struct snd_soc_pcm_runtime *rtd, int num) } /* check client and interface hw capabilities */ - if (snd_soc_dai_stream_valid(codec_dai, SNDRV_PCM_STREAM_PLAYBACK) && - snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_PLAYBACK)) - playback = 1; - if (snd_soc_dai_stream_valid(codec_dai, SNDRV_PCM_STREAM_CAPTURE) && - snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_CAPTURE)) - capture = 1; + if (codec_dai) { + if (snd_soc_dai_stream_valid(codec_dai, SNDRV_PCM_STREAM_PLAYBACK) && + snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_PLAYBACK)) + playback = 1; + if (snd_soc_dai_stream_valid(codec_dai, SNDRV_PCM_STREAM_CAPTURE) && + snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_CAPTURE)) + capture = 1; + } /* * Compress devices are unidirectional so only one of the directions -- 2.7.4

2 1

[PATCH v10 00/10] Add support for audio on SC7280 based targets
by Srinivasa Rao Mandadapu 25 Feb '22

25 Feb '22

This patch set is to add support for Audio over wcd codec, digital mics, through digital codecs and without ADSP. Changes Since V9: -- Change individual clock voting to bulk clock voting of lpass-sc7280 platform driver. -- Remove redundant clocks in lpass variant structure. -- Add mclk for MI2S based headset path. -- Remove unused lpass variant structure members in lpass header. Changes Since V8: -- Fix errors in sc7280 lpass cpu dt-bindings. -- Move to quicinc domain email id's. Changes Since V7: -- Fix indentation errors. -- Bisect patches to avoid interdependency. Changes Since V6: -- Split cdc dma regmap config macros. -- Add write dma reg fields for i2s path. -- Add helper function to distinguish rxtx and va dma ports. -- Optimizing clock and reg name in cpu dt-bindings. -- Update buffer management for cdc dma path. -- Remove Kconfig fields of machine driver. Changes Since V5: -- Include MI2S primary node to snd_soc_dai_driver in lpass-sc7280 platform driver. -- Move dependency patch list to corresponding patch. -- Add support for missing cdc-dma ports. -- Change if/else conditional statements to switch cases. -- Add missing error handlings. -- Typo errors fix. Changes Since V4: -- Remove unused variable in lpass-sc7280 platform driver. Changes Since V3: -- Remove redundant power domain controls. As power domains can be configured from dtsi. Changes Since V2: -- Split lpass sc7280 cpu driver patch and create regmap config patch. -- Create patches based on latest kernel tip. -- Add helper function to get dma control and lpaif handle. -- Remove unused variables. Changes Since V1: -- Typo errors fix -- CPU driver readable/writable apis optimization. -- Add Missing config patch -- Add Common api for repeated dmactl initialization. Srinivasa Rao Mandadapu (10): ASoC: qcom: SC7280: Update config for building codec dma drivers ASoC: qcom: Move lpass_pcm_data structure to lpass header ASoC: qcom: lpass: Add dma fields for codec dma lpass interface ASoC: qcom: Add helper function to get dma control and lpaif handle ASoC: qcom: Add register definition for codec rddma and wrdma ASoC: qcom: Add regmap config support for codec dma driver ASoC: qcom: Add support for codec dma driver ASoC: qcom: Add lpass CPU driver for codec dma control ASoC: dt-bindings: Add SC7280 lpass cpu bindings ASoC: qcom: lpass-sc7280: Add platform driver for lpass audio .../devicetree/bindings/sound/qcom,lpass-cpu.yaml | 75 ++- sound/soc/qcom/Kconfig | 11 + sound/soc/qcom/Makefile | 4 + sound/soc/qcom/lpass-cdc-dma.c | 275 +++++++++ sound/soc/qcom/lpass-cpu.c | 244 +++++++- sound/soc/qcom/lpass-lpaif-reg.h | 127 ++++- sound/soc/qcom/lpass-platform.c | 617 ++++++++++++++++++--- sound/soc/qcom/lpass-sc7280.c | 445 +++++++++++++++ sound/soc/qcom/lpass.h | 145 +++++ 9 files changed, 1856 insertions(+), 87 deletions(-) create mode 100644 sound/soc/qcom/lpass-cdc-dma.c create mode 100644 sound/soc/qcom/lpass-sc7280.c -- 2.7.4

2 12

[RESEND, v9 00/10] Add support for audio on SC7280 based targets
by Srinivasa Rao Mandadapu 25 Feb '22

25 Feb '22

This patch set is to add support for Audio over wcd codec, digital mics, through digital codecs and without ADSP. Changes Since V8: -- Fix errors in sc7280 lpass cpu dt-bindings. -- Move to quicinc domain email id's. Changes Since V7: -- Fix indentation errors. -- Bisect patches to avoid interdependency. Changes Since V6: -- Split cdc dma regmap config macros. -- Add write dma reg fields for i2s path. -- Add helper function to distinguish rxtx and va dma ports. -- Optimizing clock and reg name in cpu dt-bindings. -- Update buffer management for cdc dma path. -- Remove Kconfig fields of machine driver. Changes Since V5: -- Include MI2S primary node to snd_soc_dai_driver in lpass-sc7280 platform driver. -- Move dependency patch list to corresponding patch. -- Add support for missing cdc-dma ports. -- Change if/else conditional statements to switch cases. -- Add missing error handlings. -- Typo errors fix. Changes Since V4: -- Remove unused variable in lpass-sc7280 platform driver. Changes Since V3: -- Remove redundant power domain controls. As power domains can be configured from dtsi. Changes Since V2: -- Split lpass sc7280 cpu driver patch and create regmap config patch. -- Create patches based on latest kernel tip. -- Add helper function to get dma control and lpaif handle. -- Remove unused variables. Changes Since V1: -- Typo errors fix -- CPU driver readable/writable apis optimization. -- Add Missing config patch -- Add Common api for repeated dmactl initialization. Srinivasa Rao Mandadapu (10): ASoC: qcom: SC7280: Update config for building codec dma drivers ASoC: qcom: Move lpass_pcm_data structure to lpass header ASoC: qcom: lpass: Add dma fields for codec dma lpass interface ASoC: qcom: Add helper function to get dma control and lpaif handle ASoC: qcom: Add register definition for codec rddma and wrdma ASoC: qcom: Add regmap config support for codec dma driver ASoC: qcom: Add support for codec dma driver ASoC: qcom: Add lpass CPU driver for codec dma control ASoC: dt-bindings: Add SC7280 lpass cpu bindings ASoC: qcom: lpass-sc7280: Add platform driver for lpass audio .../devicetree/bindings/sound/qcom,lpass-cpu.yaml | 75 ++- sound/soc/qcom/Kconfig | 11 + sound/soc/qcom/Makefile | 4 + sound/soc/qcom/lpass-cdc-dma.c | 275 +++++++++ sound/soc/qcom/lpass-cpu.c | 244 +++++++- sound/soc/qcom/lpass-lpaif-reg.h | 127 ++++- sound/soc/qcom/lpass-platform.c | 617 ++++++++++++++++++--- sound/soc/qcom/lpass-sc7280.c | 441 +++++++++++++++ sound/soc/qcom/lpass.h | 162 ++++++ 9 files changed, 1869 insertions(+), 87 deletions(-) create mode 100644 sound/soc/qcom/lpass-cdc-dma.c create mode 100644 sound/soc/qcom/lpass-sc7280.c -- 2.7.4

3 13

[RFC PATCH 1/3] ASoC: simple-card-utils: add support for componants provideing jack events via set_jack
by Carl Philipp Klemm 20 Feb '22

20 Feb '22

This allows componants that want a jack to report state on to do so by calling set_jack on components implementing this function. Im not entirely sure this is the right way to do this so RFC Signed-off-by: Carl Philipp Klemm <philipp(a)uvos.xyz> --- include/sound/simple_card_utils.h | 6 ++-- sound/soc/generic/simple-card-utils.c | 47 +++++++++++++++++++-------- 2 files changed, 36 insertions(+), 17 deletions(-) diff --git a/include/sound/simple_card_utils.h b/include/sound/simple_card_utils.h index 51b3b485a92e..547ad537613d 100644 --- a/include/sound/simple_card_utils.h +++ b/include/sound/simple_card_utils.h @@ -57,8 +57,8 @@ struct asoc_simple_priv { struct prop_nums num; unsigned int mclk_fs; } *dai_props; - struct asoc_simple_jack hp_jack; - struct asoc_simple_jack mic_jack; + struct asoc_simple_jack *hp_jack; + struct asoc_simple_jack *mic_jack; struct snd_soc_dai_link *dai_link; struct asoc_simple_dai *dais; struct snd_soc_dai_link_component *dlcs; @@ -173,7 +173,7 @@ int asoc_simple_parse_pin_switches(struct snd_soc_card *card, char *prefix); int asoc_simple_init_jack(struct snd_soc_card *card, - struct asoc_simple_jack *sjack, + struct asoc_simple_jack **sjack, int is_hp, char *prefix, char *pin); int asoc_simple_init_priv(struct asoc_simple_priv *priv, struct link_info *li); diff --git a/sound/soc/generic/simple-card-utils.c b/sound/soc/generic/simple-card-utils.c index 10c63b73900c..1899feba16cc 100644 --- a/sound/soc/generic/simple-card-utils.c +++ b/sound/soc/generic/simple-card-utils.c @@ -395,6 +395,7 @@ int asoc_simple_dai_init(struct snd_soc_pcm_runtime *rtd) struct asoc_simple_priv *priv = snd_soc_card_get_drvdata(rtd->card); struct simple_dai_props *props = simple_priv_to_props(priv, rtd->num); struct asoc_simple_dai *dai; + struct snd_soc_component *component; int i, ret; for_each_prop_dai_codec(props, i, dai) { @@ -412,6 +413,21 @@ int asoc_simple_dai_init(struct snd_soc_pcm_runtime *rtd) if (ret < 0) return ret; + for_each_rtd_components(rtd, i, component) { + if (component->driver->set_jack) { + if (!priv->hp_jack) { + priv->hp_jack = devm_kzalloc(priv->snd_card.dev, + sizeof(*priv->hp_jack), GFP_KERNEL); + snd_soc_card_jack_new(&priv->snd_card, + "Headphones", + SND_JACK_HEADPHONE, + &priv->hp_jack->jack, + NULL, 0); + } + snd_soc_component_set_jack(component, &priv->hp_jack->jack, NULL); + } + } + return 0; } EXPORT_SYMBOL_GPL(asoc_simple_dai_init); @@ -554,7 +570,7 @@ int asoc_simple_parse_pin_switches(struct snd_soc_card *card, EXPORT_SYMBOL_GPL(asoc_simple_parse_pin_switches); int asoc_simple_init_jack(struct snd_soc_card *card, - struct asoc_simple_jack *sjack, + struct asoc_simple_jack **sjack, int is_hp, char *prefix, char *pin) { @@ -569,8 +585,6 @@ int asoc_simple_init_jack(struct snd_soc_card *card, if (!prefix) prefix = ""; - sjack->gpio.gpio = -ENOENT; - if (is_hp) { snprintf(prop, sizeof(prop), "%shp-det-gpio", prefix); pin_name = pin ? pin : "Headphones"; @@ -588,21 +602,26 @@ int asoc_simple_init_jack(struct snd_soc_card *card, return -EPROBE_DEFER; if (gpio_is_valid(det)) { - sjack->pin.pin = pin_name; - sjack->pin.mask = mask; + struct asoc_simple_jack *sjack_d; + + sjack = devm_kzalloc(dev, sizeof(*(*sjack)), GFP_KERNEL); + sjack_d = *sjack; + + sjack_d->pin.pin = pin_name; + sjack_d->pin.mask = mask; - sjack->gpio.name = gpio_name; - sjack->gpio.report = mask; - sjack->gpio.gpio = det; - sjack->gpio.invert = !!(flags & OF_GPIO_ACTIVE_LOW); - sjack->gpio.debounce_time = 150; + sjack_d->gpio.name = gpio_name; + sjack_d->gpio.report = mask; + sjack_d->gpio.gpio = det; + sjack_d->gpio.invert = !!(flags & OF_GPIO_ACTIVE_LOW); + sjack_d->gpio.debounce_time = 150; snd_soc_card_jack_new(card, pin_name, mask, - &sjack->jack, - &sjack->pin, 1); + &sjack_d->jack, + &sjack_d->pin, 1); - snd_soc_jack_add_gpios(&sjack->jack, 1, - &sjack->gpio); + snd_soc_jack_add_gpios(&sjack_d->jack, 1, + &sjack_d->gpio); } return 0; -- 2.34.1

3 14