November 2021 - Alsa-devel - mailman.alsa-project.org

[PATCH] ASoC: wm_adsp: wm_adsp_control_add() error: uninitialized symbol 'ret'
by Simon Trimmer 16 Nov '21

16 Nov '21

This patch fixes the static analysis warning as it is correctly indicating a possible code path, it cannot know that for the affected firmware versions subname would always be NULL. Reported-by: kernel test robot <lkp(a)intel.com> Reported-by: Dan Carpenter <dan.carpenter(a)oracle.com> Signed-off-by: Simon Trimmer <simont(a)opensource.cirrus.com> --- sound/soc/codecs/wm_adsp.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c index d4f0d72cbcc8..6cb01a8e08fb 100644 --- a/sound/soc/codecs/wm_adsp.c +++ b/sound/soc/codecs/wm_adsp.c @@ -617,8 +617,9 @@ static int wm_adsp_control_add(struct cs_dsp_coeff_ctl *cs_ctl) switch (cs_dsp->fw_ver) { case 0: case 1: - snprintf(name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, "%s %s %x", - cs_dsp->name, region_name, cs_ctl->alg_region.alg); + ret = scnprintf(name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, + "%s %s %x", cs_dsp->name, region_name, + cs_ctl->alg_region.alg); break; case 2: ret = scnprintf(name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, -- 2.33.0

3 2

[PATCH 0/2] Add tfa9897 rcv-gpios support
by Vincent Knecht 15 Nov '21

15 Nov '21

This is the continuation of a previous series [1] where - patch 1/4 is removed in favor of using pin switch This will be posted independently of tfa989x support, since it mainly require changes to sound/soc/qcom/common.c and device DTS. - patch 2/4 is already merged so here are reworked patch 3/4 (bindings fixed and example added) and patch 4/4 unchanged. [1] https://patchwork.kernel.org/project/alsa-devel/cover/20211024085840.153643… Vincent Knecht (2): ASoC: dt-bindings: nxp, tfa989x: Add rcv-gpios property for tfa9897 ASoC: codecs: tfa989x: Add support for tfa9897 optional rcv-gpios .../bindings/sound/nxp,tfa989x.yaml | 41 +++++++++++++++++++ sound/soc/codecs/tfa989x.c | 20 ++++++++- 2 files changed, 60 insertions(+), 1 deletion(-) -- 2.31.1

3 4

[PATCH 00/10] ASoC: Intel: sof_sdw: Use fixed DAI link id
by Bard Liao 15 Nov '21

15 Nov '21

This series provides a way to use constant dailink numbers for different devices. So that we don't need to renumber them in topologies. Some patches with different purpose are sent together in this series since they are dependent. Bard Liao (8): ASoC: intel: sof_sdw: return the original error number ASoC: intel: sof_sdw: rename be_index/link_id to link_index ASoC: intel: sof_sdw: Use a fixed DAI link id for AMP ASoC: intel: sof_sdw: move DMIC link id overwrite to create_sdw_dailink ASoC: intel: sof_sdw: remove SOF_RT715_DAI_ID_FIX quirk ASoC: intel: sof_sdw: remove sof_sdw_mic_codec_mockup_init ASoC: intel: sof_sdw: remove get_next_be_id ASoC: intel: sof_sdw: add link adr order check Pierre-Louis Bossart (2): ASoC: Intel: sof_sdw: fix jack detection on HP Spectre x360 convertible ASoC: Intel: sof_sdw: add SKU for Dell Latitude 9520 sound/soc/intel/boards/sof_sdw.c | 152 ++++++++++---------- sound/soc/intel/boards/sof_sdw_common.h | 7 +- sound/soc/intel/boards/sof_sdw_rt715.c | 7 - sound/soc/intel/boards/sof_sdw_rt715_sdca.c | 7 - 4 files changed, 85 insertions(+), 88 deletions(-) -- 2.17.1

2 11

[PATCH 0/3] ASoC: SOF: Implement support for DMA trace free IPC command
by Peter Ujfalusi 15 Nov '21

15 Nov '21

Hi, This series adds support for the new DMA_TRACE_FREE IPC message to gracefully stop and free the DMA trace related resources on the firmware side. Regards, Peter --- Ranjani Sridharan (3): ASoC: SOF: IPC: Add new IPC command to free trace DMA ASoC: SOF: IPC: update ipc_log_header() ASoC: SOF: trace: send DMA_TRACE_FREE IPC during release include/sound/sof/header.h | 1 + sound/soc/sof/core.c | 2 +- sound/soc/sof/ipc.c | 17 ++++++++++++++++- sound/soc/sof/trace.c | 18 ++++++++++++++++++ 4 files changed, 36 insertions(+), 2 deletions(-) -- 2.33.1

2 4

[PATCH] ASoC: sunxi: sun4i-spdif: Implement IEC958 control
by Jernej Skrabec 15 Nov '21

15 Nov '21

SPDIF core is capable of sending custom status. Implement IEC958 control handling. Signed-off-by: Jernej Skrabec <jernej.skrabec(a)gmail.com> --- sound/soc/sunxi/sun4i-spdif.c | 99 +++++++++++++++++++++++++++++++++++ 1 file changed, 99 insertions(+) diff --git a/sound/soc/sunxi/sun4i-spdif.c b/sound/soc/sunxi/sun4i-spdif.c index a10949bf0ca1..f7438e3ece65 100644 --- a/sound/soc/sunxi/sun4i-spdif.c +++ b/sound/soc/sunxi/sun4i-spdif.c @@ -21,6 +21,7 @@ #include <linux/platform_device.h> #include <linux/pm_runtime.h> #include <linux/reset.h> +#include <sound/asoundef.h> #include <sound/dmaengine_pcm.h> #include <sound/pcm_params.h> #include <sound/soc.h> @@ -385,11 +386,109 @@ static int sun4i_spdif_trigger(struct snd_pcm_substream *substream, int cmd, return ret; } +static int sun4i_spdif_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958; + uinfo->count = 1; + + return 0; +} + +static int sun4i_spdif_get_status_mask(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + u8 *status = ucontrol->value.iec958.status; + + status[0] = 0xff; + status[1] = 0xff; + status[2] = 0xff; + status[3] = 0xff; + status[4] = 0xff; + status[5] = 0x03; + + return 0; +} + +static int sun4i_spdif_get_status(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol); + struct sun4i_spdif_dev *host = snd_soc_dai_get_drvdata(cpu_dai); + u8 *status = ucontrol->value.iec958.status; + unsigned int reg; + + regmap_read(host->regmap, SUN4I_SPDIF_TXCHSTA0, &reg); + + status[0] = reg & 0xff; + status[1] = (reg >> 8) & 0xff; + status[2] = (reg >> 16) & 0xff; + status[3] = (reg >> 24) & 0xff; + + regmap_read(host->regmap, SUN4I_SPDIF_TXCHSTA1, &reg); + + status[4] = reg & 0xff; + status[5] = (reg >> 8) & 0x3; + + return 0; +} + +static int sun4i_spdif_set_status(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol); + struct sun4i_spdif_dev *host = snd_soc_dai_get_drvdata(cpu_dai); + u8 *status = ucontrol->value.iec958.status; + unsigned int reg; + + reg = (u32)status[3] << 24; + reg |= (u32)status[2] << 16; + reg |= (u32)status[1] << 8; + reg |= (u32)status[0]; + + regmap_write(host->regmap, SUN4I_SPDIF_TXCHSTA0, reg); + + reg = (u32)(status[5] & 3) << 8; + reg |= (u32)status[4]; + + regmap_write(host->regmap, SUN4I_SPDIF_TXCHSTA1, reg); + + reg = SUN4I_SPDIF_TXCFG_CHSTMODE; + if (status[0] & IEC958_AES0_NONAUDIO) + reg |= SUN4I_SPDIF_TXCFG_NONAUDIO; + + regmap_update_bits(host->regmap, SUN4I_SPDIF_TXCFG, + SUN4I_SPDIF_TXCFG_CHSTMODE | + SUN4I_SPDIF_TXCFG_NONAUDIO, reg); + + return 0; +} + +static struct snd_kcontrol_new sun4i_spdif_controls[] = { + { + .access = SNDRV_CTL_ELEM_ACCESS_READ, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, + .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, MASK), + .info = sun4i_spdif_info, + .get = sun4i_spdif_get_status_mask + }, + { + .iface = SNDRV_CTL_ELEM_IFACE_PCM, + .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT), + .info = sun4i_spdif_info, + .get = sun4i_spdif_get_status, + .put = sun4i_spdif_set_status + } +}; + static int sun4i_spdif_soc_dai_probe(struct snd_soc_dai *dai) { struct sun4i_spdif_dev *host = snd_soc_dai_get_drvdata(dai); snd_soc_dai_init_dma_data(dai, &host->dma_params_tx, NULL); + snd_soc_add_dai_controls(dai, sun4i_spdif_controls, + ARRAY_SIZE(sun4i_spdif_controls)); + return 0; } -- 2.33.1

2 1

[PATCH v5 1/2] dt-bindings: sound: tlv320adc3xxx: New codec driver
by Ricard Wanderlof 15 Nov '21

15 Nov '21

DT bindings for tlv320adc3xxx driver, currently supporting Texas Instruments TLV320ADC3001 and TLV320ADC3101 audio ADCs. Signed-off-by: Ricard Wanderlof <ricardw(a)axis.com> --- .../bindings/sound/ti,tlv320adc3xxx.yaml | 137 ++++++++++++++++++ include/dt-bindings/sound/tlv320adc3xxx.h | 28 ++++ 2 files changed, 165 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml create mode 100644 include/dt-bindings/sound/tlv320adc3xxx.h diff --git a/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml b/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml new file mode 100644 index 000000000000..c4fed6335230 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml @@ -0,0 +1,137 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/ti,tlv320adc3xxx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TLV320ADC3001/TLV320ADC3101 Stereo ADC + +maintainers: + - Ricard Wanderlof <ricardw(a)axis.com> + +description: | + Texas Instruments TLV320ADC3001 and TLV320ADC3101 Stereo ADC + https://www.ti.com/product/TLV320ADC3001 + https://www.ti.com/product/TLV320ADC3101 + +properties: + compatible: + enum: + - ti,tlv320adc3001 + - ti,tlv320adc3101 + + reg: + maxItems: 1 + description: I2C address + + '#sound-dai-cells': + const: 0 + + '#gpio-cells': + const: 2 + + gpio-controller: true + + reset-gpios: + maxItems: 1 + description: GPIO pin used for codec reset (RESET pin) + + clocks: + maxItems: 1 + description: Master clock (MCLK) + + ti,dmdin-gpio1: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # ADC3XXX_GPIO_DISABLED - I/O buffers powered down and not used + - 1 # ADC3XXX_GPIO_INPUT - Various non-GPIO input functions + - 2 # ADC3XXX_GPIO_GPI - General purpose input + - 3 # ADC3XXX_GPIO_GPO - General purpose output + - 4 # ADC3XXX_GPIO_CLKOUT - Clock source set in CLKOUT_MUX reg + - 5 # ADC3XXX_GPIO_INT1 - INT1 output + - 6 # ADC3XXX_GPIO_SECONDARY_BCLK - Codec interface secondary BCLK + - 7 # ADC3XXX_GPIO_SECONDARY_WCLK - Codec interface secondary WCLK + default: 0 + description: | + Configuration for DMDIN/GPIO1 pin. + + When ADC3XXX_GPIO_GPO is configured, this causes corresponding the + ALSA control "GPIOx Output" to appear, as a switch control. + + ti,dmclk-gpio2: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # ADC3XXX_GPIO_DISABLED - I/O buffers powered down and not used + - 1 # ADC3XXX_GPIO_INPUT - Various non-GPIO input functions + - 2 # ADC3XXX_GPIO_GPI - General purpose input + - 3 # ADC3XXX_GPIO_GPO - General purpose output + - 4 # ADC3XXX_GPIO_CLKOUT - Clock source set in CLKOUT_MUX reg + - 5 # ADC3XXX_GPIO_INT1 - INT1 output + - 6 # ADC3XXX_GPIO_SECONDARY_BCLK - Codec interface secondary BCLK + - 7 # ADC3XXX_GPIO_SECONDARY_WCLK - Codec interface secondary WCLK + default: 0 + description: | + Configuration for DMCLK/GPIO2 pin. + + When ADC3XXX_GPIO_GPO is configured, this causes corresponding the + ALSA control "GPIOx Output" to appear, as a switch control. + + Note that there is currently no support for reading the GPIO pins as + inputs. + + ti,micbias1-vg: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # ADC3XXX_MICBIAS_OFF - Mic bias is powered down + - 1 # ADC3XXX_MICBIAS_2_0V - Mic bias is set to 2.0V + - 2 # ADC3XXX_MICBIAS_2_5V - Mic bias is set to 2.5V + - 3 # ADC3XXX_MICBIAS_AVDD - Mic bias is same as AVDD supply + default: 0 + description: | + Mic bias voltage output on MICBIAS1 pin + + ti,micbias2-vg: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # ADC3XXX_MICBIAS_OFF - Mic bias is powered down + - 1 # ADC3XXX_MICBIAS_2_0V - Mic bias is set to 2.0V + - 2 # ADC3XXX_MICBIAS_2_5V - Mic bias is set to 2.5V + - 3 # ADC3XXX_MICBIAS_AVDD - Mic bias is same as AVDD supply + default: 0 + description: | + Mic bias voltage output on MICBIAS2 pin + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/sound/tlv320adc3xxx.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + tlv320adc3101: tlv320adc3101@18 { + compatible = "ti,tlv320adc3101"; + reg = <0x18>; + reset-gpios = <&gpio_pc 3 GPIO_ACTIVE_LOW>; + clocks = <&audio_mclk>; + gpio-controller; + #gpio-cells = <2>; + ti,dmdin-gpio1 = <ADC3XXX_GPIO_GPO>; + ti,micbias1-vg = <ADC3XXX_MICBIAS_AVDD>; + }; + }; + + audio_mclk: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; +... diff --git a/include/dt-bindings/sound/tlv320adc3xxx.h b/include/dt-bindings/sound/tlv320adc3xxx.h new file mode 100644 index 000000000000..59ed510e6cf1 --- /dev/null +++ b/include/dt-bindings/sound/tlv320adc3xxx.h @@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Devicetree bindings definitions for tlv320adc3xxx driver. + * + * Copyright (C) 2021 Axis Communications AB + */ +#ifndef __DT_TLV320ADC3XXX_H +#define __DT_TLV320ADC3XXX_H + +#define ADC3XXX_GPIO_DISABLED 0 /* I/O buffers powered down */ +#define ADC3XXX_GPIO_INPUT 1 /* Various non-GPIO inputs */ +#define ADC3XXX_GPIO_GPI 2 /* General purpose input */ +#define ADC3XXX_GPIO_GPO 3 /* General purpose output */ +#define ADC3XXX_GPIO_CLKOUT 4 /* Source set in reg. CLKOUT_MUX */ +#define ADC3XXX_GPIO_INT1 5 /* INT1 output */ +#define ADC3XXX_GPIO_INT2 6 /* INT2 output */ +/* value 7 is reserved */ +#define ADC3XXX_GPIO_SECONDARY_BCLK 8 /* Codec interface secondary BCLK */ +#define ADC3XXX_GPIO_SECONDARY_WCLK 9 /* Codec interface secondary WCLK */ +#define ADC3XXX_GPIO_ADC_MOD_CLK 10 /* Clock output for digital mics */ +/* values 11-15 reserved */ + +#define ADC3XXX_MICBIAS_OFF 0 /* Micbias pin powered off */ +#define ADC3XXX_MICBIAS_2_0V 1 /* Micbias pin set to 2.0V */ +#define ADC3XXX_MICBIAS_2_5V 2 /* Micbias pin set to 2.5V */ +#define ADC3XXX_MICBIAS_AVDD 3 /* Use AVDD voltage for micbias pin */ + +#endif /* __DT_TLV320ADC3XXX_H */ -- 2.20.1 -- Ricard Wolf Wanderlof ricardw(at)axis.com Axis Communications AB, Lund, Sweden www.axis.com Phone +46 46 272 2016 Fax +46 46 13 61 30

1 0

[PATCH v5 0/2] Codec driver for TLV320ADC3001 and 3101
by Ricard Wanderlof 15 Nov '21

15 Nov '21

This is a codec driver for the TLV320ADC3001 and TLV320ADC3101 2 channel audio ADC chips from Texas Instruments. Based on an old driver for these chips that I was referred to by Texas Instruments, but which apparently was never upstreamed, I've taken patches from various incarnations, ported them and augmented them with various new features in order to make a working driver. There is currently no support for the on-chip "miniDSP". Although the TLV320ADC3001 and TLV320ADC3101 have similarities with other TI codec chips for which there are existing drivers, upon closer inspection I decided the differences were too great to warrant attempting to modify an existing driver, especially without access to all supported chips and resources for testing them all. There are certainly things that could be improved, among others in the area of PLL register value calculations, but it has been tested on the Axis ARTPEC-8 platform and has been found to work satisfactorily at least with a TLV320ADC3101 operating as an I2S slave at 48 kHz with 32 bit bit depth, 1 or 2 channels, both with the on-chip PLL enabled and disabled. I have not tested this on a TLV320ADC3001 chip; in the original driver the only differences were related to the now-removed initialization code, so I've just retained the compatible strings for both chips. Limitations: - GPIO pins on chip can only be set up as outputs. - Using BCLK as an input to clock chain is supported by the hw but not by driver. Changes v4->v5: Yet another fix based on kernel test robot (lkp(a)intel.com), this time a legitimate issue: the return value from of_get_named_gpio_flags() was crammed into an unsigned int so any potential negative error codes were lost. No changes to the devicetree bindings. Changes v3->v4: More fixes reported by kernel test robot (lkp(a)intel.com). Don't know why these weren't reported the first time. Changes v2->v3: Fix a couple of issues reported by the kernel test robot (lkp(a)intel.com). Changes v1->v2: Large portions of the driver have been reworked from v1 based on remarks from Mark. More specifically: - Remove an unneeded #ifdef and EXPORT_SYMBOL_GPL. - Add ADC3XXX_ prefix to all macro names to avoid namespace contention. - Clean up certain macro names with mixed lower case - upper case names. - Do away with the D0..D7 macros representing bit values. - Fix general formatting: spaces before and after {, }, replace multi spaces with tabs, maximum 2 blank lines anywhere, and other minor issues. - Page register does not need to be volatile. - Rather than use 0 / -6dB enum for input attenuator, use standard TLV. - The dither offset control contains reserved values so use VALUE_ENUM instead of straight ENUM. - Replace vector of SOC_ENUMs with individual variables. - Fix ALSA control names: - Use Volume at the end of all gain controls, and remove "Gain" where applicable. - Use "Switch" at the end of all switch controls, either adding it or changing "switch" into "Switch" as applicable. - Switches and Volumes related to capture should be set up as such, so add "Capture" to widget names where appropriate. This is mostly important for the PGA Capture and Switch widgets, not just for consistency, but also because amixer simple Switch controls expect different names (cap/nocap instead of on/off) for control values for capture. - Make widget names have capital first letters for all consitutent words. - When resuming, the registers will not have changed, so no need to call snd_soc_component_cache_sync(). - Move reset gpio init to I2C probe - Remove needless _priv at end of private struct name. - Make hex constants lower case - _CBM_CFM/_CBS_CFS -> _CBP_CFP/_CBC_CFC - Instead of using device specific ALSA controls to control the two GPIO pins, use GPIOLIB. GPIO pin functions still can be set up in the devicetree as the pins can be used for other functions which are not GPIO related. - Limitation: The GPIO pins can only be used as outputs, even though the hardware alternatively supports using them as inputs. - Handle GPIO configs in a vector rather than separately. - Use more appropriate module_i2c_driver instead of generic module_init/module_exit. - Remove useless initialization data. - As the ADC mute function had no control, add it. - Clean up GPIO initialization which was done both in the I2C probe and in the component probe. - Remove probe, remove, suspend and resume callbacks, which either do not do anything at all anymore, or uselessly just do set_bias_level. - The PLL should not be configured in the devicetree, so move the corresponding definitions to tlv320adc3xxx.h where they can be picked up by a machine driver if needed. - Default to PLL AUTO mode. - Use "reset-gpios" instead of too-generic "gpios" for dt property for configuring codec reset pin. - Use function for printing PLL mode rather than macro. - dev_info is too verbose for most of the printouts, change them to dev_dbg. - Add support for configuring micbias voltage in DT. - Remove ALSA control for mic bias. - Move PLL and NADC, MADC divisor enable to DAPM, including 10 ms post PLL start up delay via POST_PMU event. - ADC is powered on using DAPM, so needless to do it in set_bias_level, thus remove it. - Let DAPM handle BCLK divisor enable. With this, we can remove set_bias_level as it doesn't do anything anymore. - Fix incorrect argument order to a snd_soc_component_update_bits call. - Although the chip itself can operate using BCLK as the clock source, either directly to the divider chain or via the PLL, this is not yet supported in the driver, so require the clocks property for the MCLK for now. - Move PLL rate structure out of .h file where it does not belong. /Ricard Ricard Wanderlof (2): dt-bindings: sound: tlv320adc3xxx: New codec driver ASoC: codec: tlv320adc3xxx: New codec driver .../bindings/sound/ti,tlv320adc3xxx.yaml | 137 +++ include/dt-bindings/sound/tlv320adc3xxx.h | 28 + sound/soc/codecs/Kconfig | 7 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/tlv320adc3xxx.c | 1072 +++++++++++++++++ sound/soc/codecs/tlv320adc3xxx.h | 379 ++++++ 6 files changed, 1625 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml create mode 100644 include/dt-bindings/sound/tlv320adc3xxx.h create mode 100644 sound/soc/codecs/tlv320adc3xxx.c create mode 100644 sound/soc/codecs/tlv320adc3xxx.h -- 2.20.1 -- Ricard Wolf Wanderlof ricardw(at)axis.com Axis Communications AB, Lund, Sweden www.axis.com Phone +46 46 272 2016 Fax +46 46 13 61 30

1 0

[PATCH v4 2/2] ASoC: codec: tlv320adc3xxx: New codec driver
by Ricard Wanderlof 15 Nov '21

15 Nov '21

New codec driver for Texas Instruments TLV320ADC3001 and TLV320ADC3101 audio ADCs. Signed-off-by: Ricard Wanderlof <ricardw(a)axis.com> --- sound/soc/codecs/Kconfig | 7 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/tlv320adc3xxx.c | 1071 ++++++++++++++++++++++++++++++ sound/soc/codecs/tlv320adc3xxx.h | 379 +++++++++++ 4 files changed, 1459 insertions(+) create mode 100644 sound/soc/codecs/tlv320adc3xxx.c create mode 100644 sound/soc/codecs/tlv320adc3xxx.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 326f2d611ad4..b81c4721c0d5 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -220,6 +220,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_TDA7419 imply SND_SOC_TFA9879 imply SND_SOC_TFA989X + imply SND_SOC_TLV320ADC3XXX imply SND_SOC_TLV320ADCX140 imply SND_SOC_TLV320AIC23_I2C imply SND_SOC_TLV320AIC23_SPI @@ -1486,6 +1487,12 @@ config SND_SOC_TFA989X Note that the driver currently bypasses the built-in "CoolFlux DSP" and does not support (hardware) volume control. +config SND_SOC_TLV320ADC3XXX + tristate "Texas Instruments TLV320ADC3001/3101 audio ADC" + help + Enable support for Texas Instruments TLV320ADC3001 and TLV320ADC3101 + ADCs. + config SND_SOC_TLV320AIC23 tristate diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 9acfbcbfc46d..5112c12e6d76 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -238,6 +238,7 @@ snd-soc-tda7419-objs := tda7419.o snd-soc-tas2770-objs := tas2770.o snd-soc-tfa9879-objs := tfa9879.o snd-soc-tfa989x-objs := tfa989x.o +snd-soc-tlv320adc3xxx-objs := tlv320adc3xxx.o snd-soc-tlv320aic23-objs := tlv320aic23.o snd-soc-tlv320aic23-i2c-objs := tlv320aic23-i2c.o snd-soc-tlv320aic23-spi-objs := tlv320aic23-spi.o @@ -572,6 +573,7 @@ obj-$(CONFIG_SND_SOC_TDA7419) += snd-soc-tda7419.o obj-$(CONFIG_SND_SOC_TAS2770) += snd-soc-tas2770.o obj-$(CONFIG_SND_SOC_TFA9879) += snd-soc-tfa9879.o obj-$(CONFIG_SND_SOC_TFA989X) += snd-soc-tfa989x.o +obj-$(CONFIG_SND_SOC_TLV320ADC3XXX) += snd-soc-tlv320adc3xxx.o obj-$(CONFIG_SND_SOC_TLV320AIC23) += snd-soc-tlv320aic23.o obj-$(CONFIG_SND_SOC_TLV320AIC23_I2C) += snd-soc-tlv320aic23-i2c.o obj-$(CONFIG_SND_SOC_TLV320AIC23_SPI) += snd-soc-tlv320aic23-spi.o diff --git a/sound/soc/codecs/tlv320adc3xxx.c b/sound/soc/codecs/tlv320adc3xxx.c new file mode 100644 index 000000000000..fd048b084c1f --- /dev/null +++ b/sound/soc/codecs/tlv320adc3xxx.c @@ -0,0 +1,1071 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Based on sound/soc/codecs/tlv320aic3x.c by Vladimir Barinov +// +// History: +// +// Author: "Shahina Shaik" < shahina.s(a)mistralsolutions.com > +// Copyright: (C) 2010 Mistral Solutions Pvt Ltd. +// +// Author: Dongge wu <dgwu(a)ambarella.com> +// 2015/10/28 - [Dongge wu] Created file +// Copyright (C) 2014-2018, Ambarella, Inc. +// +// Author: Ricard Wanderlof <ricardw(a)axis.com> +// 2020/11/05: Fixing driver for Linux 4.14: more clocking modes, etc. +// 2021/09/03: Porting driver to Linux 5.4 and later. Added GPIO pin control, +// DAPM controlled clock chain, general cleanup. +// Copyright (C) 2021 Axis Communications AB +// + +#include <dt-bindings/sound/tlv320adc3xxx.h> +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/io.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/gpio/driver.h> +#include <linux/pm.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/cdev.h> +#include <linux/of_gpio.h> +#include <linux/slab.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/tlv.h> +#include <sound/initval.h> + +#include "tlv320adc3xxx.h" + +enum adc3xxx_type { + ADC3001 = 0, + ADC3101 +}; + +struct adc3xxx { + struct device *dev; + enum adc3xxx_type type; + struct clk *mclk; + struct regmap *regmap; + unsigned int pll_mode; + unsigned int rst_pin; + unsigned int rst_active; + unsigned int sysclk; + unsigned int gpio_cfg[ADC3XXX_GPIOS_MAX]; /* value+1 (0 => not set) */ + unsigned int micbias_vg[ADC3XXX_MICBIAS_PINS]; + int master; + u8 page_no; + int use_pll; +#ifdef CONFIG_GPIOLIB + struct gpio_chip gpio_chip; +#endif +}; + +static const unsigned int adc3xxx_gpio_ctrl_reg[ADC3XXX_GPIOS_MAX] = { + ADC3XXX_GPIO1_CTRL, + ADC3XXX_GPIO2_CTRL +}; + +static const unsigned int adc3xxx_micbias_shift[ADC3XXX_MICBIAS_PINS] = { + ADC3XXX_MICBIAS1_SHIFT, + ADC3XXX_MICBIAS2_SHIFT +}; + +static const struct reg_default adc3xxx_defaults[] = { + /* Page 0 */ + { 0, 0x00 }, { 1, 0x00 }, { 2, 0x00 }, { 3, 0x00 }, + { 4, 0x00 }, { 5, 0x11 }, { 6, 0x04 }, { 7, 0x00 }, + { 8, 0x00 }, { 9, 0x00 }, { 10, 0x00 }, { 11, 0x00 }, + { 12, 0x00 }, { 13, 0x00 }, { 14, 0x00 }, { 15, 0x00 }, + { 16, 0x00 }, { 17, 0x00 }, { 18, 0x01 }, { 19, 0x01 }, + { 20, 0x80 }, { 21, 0x80 }, { 22, 0x04 }, { 23, 0x00 }, + { 24, 0x00 }, { 25, 0x00 }, { 26, 0x01 }, { 27, 0x00 }, + { 28, 0x00 }, { 29, 0x02 }, { 30, 0x01 }, { 31, 0x00 }, + { 32, 0x00 }, { 33, 0x10 }, { 34, 0x00 }, { 35, 0x00 }, + { 36, 0x00 }, { 37, 0x00 }, { 38, 0x02 }, { 39, 0x00 }, + { 40, 0x00 }, { 41, 0x00 }, { 42, 0x00 }, { 43, 0x00 }, + { 44, 0x00 }, { 45, 0x00 }, { 46, 0x00 }, { 47, 0x00 }, + { 48, 0x00 }, { 49, 0x00 }, { 50, 0x00 }, { 51, 0x00 }, + { 52, 0x00 }, { 53, 0x12 }, { 54, 0x00 }, { 55, 0x00 }, + { 56, 0x00 }, { 57, 0x00 }, { 58, 0x00 }, { 59, 0x44 }, + { 60, 0x00 }, { 61, 0x01 }, { 62, 0x00 }, { 63, 0x00 }, + { 64, 0x00 }, { 65, 0x00 }, { 66, 0x00 }, { 67, 0x00 }, + { 68, 0x00 }, { 69, 0x00 }, { 70, 0x00 }, { 71, 0x00 }, + { 72, 0x00 }, { 73, 0x00 }, { 74, 0x00 }, { 75, 0x00 }, + { 76, 0x00 }, { 77, 0x00 }, { 78, 0x00 }, { 79, 0x00 }, + { 80, 0x00 }, { 81, 0x00 }, { 82, 0x88 }, { 83, 0x00 }, + { 84, 0x00 }, { 85, 0x00 }, { 86, 0x00 }, { 87, 0x00 }, + { 88, 0x7f }, { 89, 0x00 }, { 90, 0x00 }, { 91, 0x00 }, + { 92, 0x00 }, { 93, 0x00 }, { 94, 0x00 }, { 95, 0x00 }, + { 96, 0x7f }, { 97, 0x00 }, { 98, 0x00 }, { 99, 0x00 }, + { 100, 0x00 }, { 101, 0x00 }, { 102, 0x00 }, { 103, 0x00 }, + { 104, 0x00 }, { 105, 0x00 }, { 106, 0x00 }, { 107, 0x00 }, + { 108, 0x00 }, { 109, 0x00 }, { 110, 0x00 }, { 111, 0x00 }, + { 112, 0x00 }, { 113, 0x00 }, { 114, 0x00 }, { 115, 0x00 }, + { 116, 0x00 }, { 117, 0x00 }, { 118, 0x00 }, { 119, 0x00 }, + { 120, 0x00 }, { 121, 0x00 }, { 122, 0x00 }, { 123, 0x00 }, + { 124, 0x00 }, { 125, 0x00 }, { 126, 0x00 }, { 127, 0x00 }, + + /* Page 1 */ + { 128, 0x00 }, { 129, 0x00 }, { 130, 0x00 }, { 131, 0x00 }, + { 132, 0x00 }, { 133, 0x00 }, { 134, 0x00 }, { 135, 0x00 }, + { 136, 0x00 }, { 137, 0x00 }, { 138, 0x00 }, { 139, 0x00 }, + { 140, 0x00 }, { 141, 0x00 }, { 142, 0x00 }, { 143, 0x00 }, + { 144, 0x00 }, { 145, 0x00 }, { 146, 0x00 }, { 147, 0x00 }, + { 148, 0x00 }, { 149, 0x00 }, { 150, 0x00 }, { 151, 0x00 }, + { 152, 0x00 }, { 153, 0x00 }, { 154, 0x00 }, { 155, 0x00 }, + { 156, 0x00 }, { 157, 0x00 }, { 158, 0x00 }, { 159, 0x00 }, + { 160, 0x00 }, { 161, 0x00 }, { 162, 0x00 }, { 163, 0x00 }, + { 164, 0x00 }, { 165, 0x00 }, { 166, 0x00 }, { 167, 0x00 }, + { 168, 0x00 }, { 169, 0x00 }, { 170, 0x00 }, { 171, 0x00 }, + { 172, 0x00 }, { 173, 0x00 }, { 174, 0x00 }, { 175, 0x00 }, + { 176, 0x00 }, { 177, 0x00 }, { 178, 0x00 }, { 179, 0x00 }, + { 180, 0xff }, { 181, 0x00 }, { 182, 0x3f }, { 183, 0xff }, + { 184, 0x00 }, { 185, 0x3f }, { 186, 0x00 }, { 187, 0x80 }, + { 188, 0x80 }, { 189, 0x00 }, { 190, 0x00 }, { 191, 0x00 }, +}; + +static bool adc3xxx_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case ADC3XXX_RESET: + return true; + default: + return false; + } +} + +static const struct regmap_range_cfg adc3xxx_ranges[] = { + { + .range_min = 0, + .range_max = 2 * ADC3XXX_PAGE_SIZE, + .selector_reg = ADC3XXX_PAGE_SELECT, + .selector_mask = 0xff, + .selector_shift = 0, + .window_start = 0, + .window_len = ADC3XXX_PAGE_SIZE, + } +}; + +static const struct regmap_config adc3xxx_regmap = { + .reg_bits = 8, + .val_bits = 8, + + .reg_defaults = adc3xxx_defaults, + .num_reg_defaults = ARRAY_SIZE(adc3xxx_defaults), + + .volatile_reg = adc3xxx_volatile_reg, + + .cache_type = REGCACHE_RBTREE, + + .ranges = adc3xxx_ranges, + .num_ranges = ARRAY_SIZE(adc3xxx_ranges), + .max_register = 2 * ADC3XXX_PAGE_SIZE, +}; + +struct adc3xxx_rate_divs { + u32 mclk; + u32 rate; + u8 pll_p; + u8 pll_r; + u8 pll_j; + u16 pll_d; + u8 nadc; + u8 madc; + u8 aosr; +}; + +/* + * PLL and Clock settings. + * If p member is 0, PLL is not used. + * The order of the entries in this table have the PLL entries before + * the non-PLL entries, so that the PLL modes are preferred unless + * the PLL mode setting says otherwise. + */ +static const struct adc3xxx_rate_divs adc3xxx_divs[] = { + /* mclk, rate, p, r, j, d, nadc, madc, aosr */ + /* 8k rate */ + { 12000000, 8000, 1, 1, 7, 1680, 42, 2, 128 }, + { 12288000, 8000, 1, 1, 7, 0000, 42, 2, 128 }, + /* 11.025k rate */ + { 12000000, 11025, 1, 1, 6, 8208, 29, 2, 128 }, + /* 16k rate */ + { 12000000, 16000, 1, 1, 7, 1680, 21, 2, 128 }, + { 12288000, 16000, 1, 1, 7, 0000, 21, 2, 128 }, + /* 22.05k rate */ + { 12000000, 22050, 1, 1, 7, 560, 15, 2, 128 }, + /* 32k rate */ + { 12000000, 32000, 1, 1, 8, 1920, 12, 2, 128 }, + { 12288000, 32000, 1, 1, 8, 0000, 12, 2, 128 }, + /* 44.1k rate */ + { 12000000, 44100, 1, 1, 7, 5264, 8, 2, 128 }, + /* 48k rate */ + { 12000000, 48000, 1, 1, 7, 1680, 7, 2, 128 }, + { 12288000, 48000, 1, 1, 7, 0000, 7, 2, 128 }, + { 24576000, 48000, 1, 1, 3, 5000, 7, 2, 128 }, /* With PLL */ + { 24576000, 48000, 0, 0, 0, 0000, 2, 2, 128 }, /* Without PLL */ + /* 88.2k rate */ + { 12000000, 88200, 1, 1, 7, 5264, 4, 4, 64 }, + /* 96k rate */ + { 12000000, 96000, 1, 1, 8, 1920, 4, 4, 64 }, +}; + +static int adc3xxx_get_divs(struct device *dev, int mclk, int rate, int pll_mode) +{ + int i; + + dev_dbg(dev, "mclk = %d, rate = %d, clock mode %u\n", + mclk, rate, pll_mode); + for (i = 0; i < ARRAY_SIZE(adc3xxx_divs); i++) { + const struct adc3xxx_rate_divs *mode = &adc3xxx_divs[i]; + + /* Skip this entry if it doesn't fulfill the intended clock + * mode requirement. We consider anything besides the two + * modes below to be the same as ADC3XXX_PLL_AUTO. + */ + if ((pll_mode == ADC3XXX_PLL_BYPASS && mode->pll_p) || + (pll_mode == ADC3XXX_PLL_ENABLE && !mode->pll_p)) + continue; + + if (mode->rate == rate && mode->mclk == mclk) + return i; + } + + dev_info(dev, "Master clock rate %d and sample rate %d is not supported\n", + mclk, rate); + return -EINVAL; +} + +static int adc3xxx_pll_delay(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + /* 10msec delay needed after PLL power-up to allow + * PLL and dividers to stabilize (datasheet p13). + */ + usleep_range(10000, 20000); + + return 0; +} + +static const char * const adc_softstepping_text[] = { "1 step", "2 step", "off" }; +static SOC_ENUM_SINGLE_DECL(adc_softstepping_enum, ADC3XXX_ADC_DIGITAL, 0, + adc_softstepping_text); + +static const char * const multiplier_text[] = { "1", "2", "4", "8", "16", "32", "64", "128" }; +static SOC_ENUM_SINGLE_DECL(left_agc_attack_mult_enum, + ADC3XXX_LEFT_CHN_AGC_4, 0, multiplier_text); +static SOC_ENUM_SINGLE_DECL(right_agc_attack_mult_enum, + ADC3XXX_RIGHT_CHN_AGC_4, 0, multiplier_text); +static SOC_ENUM_SINGLE_DECL(left_agc_decay_mult_enum, + ADC3XXX_LEFT_CHN_AGC_5, 0, multiplier_text); +static SOC_ENUM_SINGLE_DECL(right_agc_decay_mult_enum, + ADC3XXX_RIGHT_CHN_AGC_5, 0, multiplier_text); + +static const char * const dither_dc_offset_text[] = { + "0mV", "15mV", "30mV", "45mV", "60mV", "75mV", "90mV", "105mV", + "-15mV", "-30mV", "-45mV", "-60mV", "-75mV", "-90mV", "-105mV" +}; +static const unsigned int dither_dc_offset_values[] = { + 0, 1, 2, 3, 4, 5, 6, 7, 9, 10, 11, 12, 13, 14, 15 +}; +static SOC_VALUE_ENUM_DOUBLE_DECL(dither_dc_offset_enum, + ADC3XXX_DITHER_CTRL, + 4, 0, 0xf, dither_dc_offset_text, + dither_dc_offset_values); + +static const DECLARE_TLV_DB_SCALE(pga_tlv, 0, 50, 0); +static const DECLARE_TLV_DB_SCALE(adc_tlv, -1200, 50, 0); +static const DECLARE_TLV_DB_SCALE(adc_fine_tlv, -40, 10, 0); +/* AGC target: 8 values: -5.5, -8, -10, -12, -14, -17, -20, -24 dB */ +/* It would be nice to declare these in the order above, but empirically + * TLV_DB_SCALE_ITEM doesn't take lightly to the increment (second) parameter + * being negative, despite there being examples to the contrary in other + * drivers. So declare these in the order from lowest to highest, and + * set the invert flag in the SOC_DOUBLE_R_TLV declaration instead. + */ +static const DECLARE_TLV_DB_RANGE(agc_target_tlv, + 0, 0, TLV_DB_SCALE_ITEM(-2400, 0, 0), + 1, 3, TLV_DB_SCALE_ITEM(-2000, 300, 0), + 4, 6, TLV_DB_SCALE_ITEM(-1200, 200, 0), + 7, 7, TLV_DB_SCALE_ITEM(-550, 0, 0)); +/* Since the 'disabled' value (mute) is at the highest value in the dB + * range (i.e. just before -32 dB) rather than the lowest, we need to resort + * to using a TLV_DB_RANGE in order to get the mute value in the right place. + */ +static const DECLARE_TLV_DB_RANGE(agc_thresh_tlv, + 0, 30, TLV_DB_SCALE_ITEM(-9000, 200, 0), + 31, 31, TLV_DB_SCALE_ITEM(0, 0, 1)); /* disabled = mute */ +/* AGC hysteresis: 4 values: 1, 2, 4 dB, disabled (= mute) */ +static const DECLARE_TLV_DB_RANGE(agc_hysteresis_tlv, + 0, 1, TLV_DB_SCALE_ITEM(100, 100, 0), + 2, 2, TLV_DB_SCALE_ITEM(400, 0, 0), + 3, 3, TLV_DB_SCALE_ITEM(0, 0, 1)); /* disabled = mute */ +static const DECLARE_TLV_DB_SCALE(agc_max_tlv, 0, 50, 0); +/* Input attenuation: -6 dB or 0 dB */ +static const DECLARE_TLV_DB_SCALE(input_attenuation_tlv, -600, 600, 0); + +static const struct snd_kcontrol_new adc3xxx_snd_controls[] = { + SOC_DOUBLE_R_TLV("PGA Capture Volume", ADC3XXX_LEFT_APGA_CTRL, + ADC3XXX_RIGHT_APGA_CTRL, 0, 80, 0, pga_tlv), + SOC_DOUBLE("PGA Capture Switch", ADC3XXX_ADC_FGA, 7, 3, 1, 1), + SOC_DOUBLE_R("AGC Capture Switch", ADC3XXX_LEFT_CHN_AGC_1, + ADC3XXX_RIGHT_CHN_AGC_1, 7, 1, 0), + SOC_DOUBLE_R_TLV("AGC Target Level Capture Volume", ADC3XXX_LEFT_CHN_AGC_1, + ADC3XXX_RIGHT_CHN_AGC_2, 4, 0x07, 1, agc_target_tlv), + SOC_DOUBLE_R_TLV("AGC Noise Threshold Capture Volume", ADC3XXX_LEFT_CHN_AGC_2, + ADC3XXX_RIGHT_CHN_AGC_2, 1, 0x1f, 1, agc_thresh_tlv), + SOC_DOUBLE_R_TLV("AGC Hysteresis Capture Volume", ADC3XXX_LEFT_CHN_AGC_2, + ADC3XXX_RIGHT_CHN_AGC_2, 6, 3, 0, agc_hysteresis_tlv), + SOC_DOUBLE_R("AGC Clip Stepping Capture Switch", ADC3XXX_LEFT_CHN_AGC_2, + ADC3XXX_RIGHT_CHN_AGC_2, 0, 1, 0), + /* + * Oddly enough, the data sheet says the default value + * for the left/right AGC maximum gain register field + * (ADC3XXX_LEFT/RIGHT_CHN_AGC_3 bits 0..6) is 0x7f = 127 + * (verified empirically) even though this value (indeed, above + * 0x50) is specified as 'Reserved. Do not use.' in the accompanying + * table in the data sheet. + */ + SOC_DOUBLE_R_TLV("AGC Maximum Capture Volume", ADC3XXX_LEFT_CHN_AGC_3, + ADC3XXX_RIGHT_CHN_AGC_3, 0, 0x50, 0, agc_max_tlv), + SOC_DOUBLE_R("AGC Attack Time", ADC3XXX_LEFT_CHN_AGC_4, + ADC3XXX_RIGHT_CHN_AGC_4, 3, 0x1f, 0), + /* Would like to have the multipliers as LR pairs, but there is + * no SOC_ENUM_foo which accepts two values in separate registers. + */ + SOC_ENUM("AGC Left Attack Time Multiplier", left_agc_attack_mult_enum), + SOC_ENUM("AGC Right Attack Time Multiplier", right_agc_attack_mult_enum), + SOC_DOUBLE_R("AGC Decay Time", ADC3XXX_LEFT_CHN_AGC_5, + ADC3XXX_RIGHT_CHN_AGC_5, 3, 0x1f, 0), + SOC_ENUM("AGC Left Decay Time Multiplier", left_agc_decay_mult_enum), + SOC_ENUM("AGC Right Decay Time Multiplier", right_agc_decay_mult_enum), + SOC_DOUBLE_R("AGC Noise Debounce", ADC3XXX_LEFT_CHN_AGC_6, + ADC3XXX_RIGHT_CHN_AGC_6, 0, 0x1f, 0), + SOC_DOUBLE_R("AGC Signal Debounce", ADC3XXX_LEFT_CHN_AGC_7, + ADC3XXX_RIGHT_CHN_AGC_7, 0, 0x0f, 0), + /* Read only register */ + SOC_DOUBLE_R_S_TLV("AGC Applied Capture Volume", ADC3XXX_LEFT_AGC_GAIN, + ADC3XXX_RIGHT_AGC_GAIN, 0, -24, 40, 6, 0, adc_tlv), + /* ADC soft stepping */ + SOC_ENUM("ADC Soft Stepping", adc_softstepping_enum), + /* Left/Right Input attenuation */ + SOC_SINGLE_TLV("Left Input IN_1L Capture Volume", + ADC3XXX_LEFT_PGA_SEL_1, 0, 1, 1, input_attenuation_tlv), + SOC_SINGLE_TLV("Left Input IN_2L Capture Volume", + ADC3XXX_LEFT_PGA_SEL_1, 2, 1, 1, input_attenuation_tlv), + SOC_SINGLE_TLV("Left Input IN_3L Capture Volume", + ADC3XXX_LEFT_PGA_SEL_1, 4, 1, 1, input_attenuation_tlv), + SOC_SINGLE_TLV("Left Input IN_1R Capture Volume", + ADC3XXX_LEFT_PGA_SEL_2, 0, 1, 1, input_attenuation_tlv), + SOC_SINGLE_TLV("Left Input DIF_2L_3L Capture Volume", + ADC3XXX_LEFT_PGA_SEL_1, 6, 1, 1, input_attenuation_tlv), + SOC_SINGLE_TLV("Left Input DIF_1L_1R Capture Volume", + ADC3XXX_LEFT_PGA_SEL_2, 4, 1, 1, input_attenuation_tlv), + SOC_SINGLE_TLV("Left Input DIF_2R_3R Capture Volume", + ADC3XXX_LEFT_PGA_SEL_2, 2, 1, 1, input_attenuation_tlv), + SOC_SINGLE_TLV("Right Input IN_1R Capture Volume", + ADC3XXX_RIGHT_PGA_SEL_1, 0, 1, 1, input_attenuation_tlv), + SOC_SINGLE_TLV("Right Input IN_2R Capture Volume", + ADC3XXX_RIGHT_PGA_SEL_1, 2, 1, 1, input_attenuation_tlv), + SOC_SINGLE_TLV("Right Input IN_3R Capture Volume", + ADC3XXX_RIGHT_PGA_SEL_1, 4, 1, 1, input_attenuation_tlv), + SOC_SINGLE_TLV("Right Input IN_1L Capture Volume", + ADC3XXX_RIGHT_PGA_SEL_2, 0, 1, 1, input_attenuation_tlv), + SOC_SINGLE_TLV("Right Input DIF_2R_3R Capture Volume", + ADC3XXX_RIGHT_PGA_SEL_1, 6, 1, 1, input_attenuation_tlv), + SOC_SINGLE_TLV("Right Input DIF_1L_1R Capture Volume", + ADC3XXX_RIGHT_PGA_SEL_2, 4, 1, 1, input_attenuation_tlv), + SOC_SINGLE_TLV("Right Input DIF_2L_3L Capture Volume", + ADC3XXX_RIGHT_PGA_SEL_2, 2, 1, 1, input_attenuation_tlv), + SOC_DOUBLE_R_S_TLV("ADC Volume Control Capture Volume", ADC3XXX_LADC_VOL, + ADC3XXX_RADC_VOL, 0, -24, 40, 6, 0, adc_tlv), + /* Empirically, the following doesn't work the way it's supposed + * to. Values 0, -0.1, -0.2 and -0.3 dB result in the same level, and + * -0.4 dB drops about 0.12 dB on a specific chip. + */ + SOC_DOUBLE_TLV("ADC Fine Volume Control Capture Volume", ADC3XXX_ADC_FGA, + 4, 0, 4, 1, adc_fine_tlv), + SOC_SINGLE("Left ADC Unselected CM Bias Capture Switch", + ADC3XXX_LEFT_PGA_SEL_2, 6, 1, 0), + SOC_SINGLE("Right ADC Unselected CM Bias Capture Switch", + ADC3XXX_RIGHT_PGA_SEL_2, 6, 1, 0), + SOC_ENUM("Dither Control DC Offset", dither_dc_offset_enum), +}; + +/* Left input selection, Single Ended inputs and Differential inputs */ +static const struct snd_kcontrol_new left_input_mixer_controls[] = { + SOC_DAPM_SINGLE("IN_1L Capture Switch", + ADC3XXX_LEFT_PGA_SEL_1, 1, 0x1, 1), + SOC_DAPM_SINGLE("IN_2L Capture Switch", + ADC3XXX_LEFT_PGA_SEL_1, 3, 0x1, 1), + SOC_DAPM_SINGLE("IN_3L Capture Switch", + ADC3XXX_LEFT_PGA_SEL_1, 5, 0x1, 1), + SOC_DAPM_SINGLE("DIF_2L_3L Capture Switch", + ADC3XXX_LEFT_PGA_SEL_1, 7, 0x1, 1), + SOC_DAPM_SINGLE("DIF_1L_1R Capture Switch", + ADC3XXX_LEFT_PGA_SEL_2, 5, 0x1, 1), + SOC_DAPM_SINGLE("DIF_2R_3R Capture Switch", + ADC3XXX_LEFT_PGA_SEL_2, 3, 0x1, 1), + SOC_DAPM_SINGLE("IN_1R Capture Switch", + ADC3XXX_LEFT_PGA_SEL_2, 1, 0x1, 1), +}; + +/* Right input selection, Single Ended inputs and Differential inputs */ +static const struct snd_kcontrol_new right_input_mixer_controls[] = { + SOC_DAPM_SINGLE("IN_1R Capture Switch", + ADC3XXX_RIGHT_PGA_SEL_1, 1, 0x1, 1), + SOC_DAPM_SINGLE("IN_2R Capture Switch", + ADC3XXX_RIGHT_PGA_SEL_1, 3, 0x1, 1), + SOC_DAPM_SINGLE("IN_3R Capture Switch", + ADC3XXX_RIGHT_PGA_SEL_1, 5, 0x1, 1), + SOC_DAPM_SINGLE("DIF_2R_3R Capture Switch", + ADC3XXX_RIGHT_PGA_SEL_1, 7, 0x1, 1), + SOC_DAPM_SINGLE("DIF_1L_1R Capture Switch", + ADC3XXX_RIGHT_PGA_SEL_2, 5, 0x1, 1), + SOC_DAPM_SINGLE("DIF_2L_3L Capture Switch", + ADC3XXX_RIGHT_PGA_SEL_2, 3, 0x1, 1), + SOC_DAPM_SINGLE("IN_1L Capture Switch", + ADC3XXX_RIGHT_PGA_SEL_2, 1, 0x1, 1), +}; + +/* Left Digital Mic input for left ADC */ +static const struct snd_kcontrol_new left_input_dmic_controls[] = { + SOC_DAPM_SINGLE("Left ADC Capture Switch", + ADC3XXX_ADC_DIGITAL, 3, 0x1, 0), +}; + +/* Right Digital Mic input for Right ADC */ +static const struct snd_kcontrol_new right_input_dmic_controls[] = { + SOC_DAPM_SINGLE("Right ADC Capture Switch", + ADC3XXX_ADC_DIGITAL, 2, 0x1, 0), +}; + +/* DAPM widgets */ +static const struct snd_soc_dapm_widget adc3xxx_dapm_widgets[] = { + + /* Left Input Selection */ + SND_SOC_DAPM_MIXER("Left Input", SND_SOC_NOPM, 0, 0, + &left_input_mixer_controls[0], + ARRAY_SIZE(left_input_mixer_controls)), + /* Right Input Selection */ + SND_SOC_DAPM_MIXER("Right Input", SND_SOC_NOPM, 0, 0, + &right_input_mixer_controls[0], + ARRAY_SIZE(right_input_mixer_controls)), + /* PGA selection */ + SND_SOC_DAPM_PGA("Left PGA", ADC3XXX_LEFT_APGA_CTRL, 7, 1, NULL, 0), + SND_SOC_DAPM_PGA("Right PGA", ADC3XXX_RIGHT_APGA_CTRL, 7, 1, NULL, 0), + + /* Digital Microphone Input Control for Left/Right ADC */ + SND_SOC_DAPM_MIXER("Left DMic Input", SND_SOC_NOPM, 0, 0, + &left_input_dmic_controls[0], + ARRAY_SIZE(left_input_dmic_controls)), + SND_SOC_DAPM_MIXER("Right DMic Input", SND_SOC_NOPM, 0, 0, + &right_input_dmic_controls[0], + ARRAY_SIZE(right_input_dmic_controls)), + + /* Left/Right ADC */ + SND_SOC_DAPM_ADC("Left ADC", "Left Capture", ADC3XXX_ADC_DIGITAL, 7, 0), + SND_SOC_DAPM_ADC("Right ADC", "Right Capture", ADC3XXX_ADC_DIGITAL, 6, 0), + + /* Inputs */ + SND_SOC_DAPM_INPUT("IN_1L"), + SND_SOC_DAPM_INPUT("IN_1R"), + SND_SOC_DAPM_INPUT("IN_2L"), + SND_SOC_DAPM_INPUT("IN_2R"), + SND_SOC_DAPM_INPUT("IN_3L"), + SND_SOC_DAPM_INPUT("IN_3R"), + SND_SOC_DAPM_INPUT("DIFL_1L_1R"), + SND_SOC_DAPM_INPUT("DIFL_2L_3L"), + SND_SOC_DAPM_INPUT("DIFL_2R_3R"), + SND_SOC_DAPM_INPUT("DIFR_1L_1R"), + SND_SOC_DAPM_INPUT("DIFR_2L_3L"), + SND_SOC_DAPM_INPUT("DIFR_2R_3R"), + SND_SOC_DAPM_INPUT("DMic_L"), + SND_SOC_DAPM_INPUT("DMic_R"), + + /* Digital audio interface output */ + SND_SOC_DAPM_AIF_OUT("AIF_OUT", "Capture", 0, SND_SOC_NOPM, 0, 0), + + /* Clocks */ + SND_SOC_DAPM_SUPPLY("PLL_CLK", ADC3XXX_PLL_PROG_PR, ADC3XXX_ENABLE_PLL_SHIFT, + 0, adc3xxx_pll_delay, SND_SOC_DAPM_POST_PMU), + + SND_SOC_DAPM_SUPPLY("ADC_CLK", ADC3XXX_ADC_NADC, ADC3XXX_ENABLE_NADC_SHIFT, + 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("ADC_MOD_CLK", ADC3XXX_ADC_MADC, ADC3XXX_ENABLE_MADC_SHIFT, + 0, NULL, 0), + + /* This refers to the generated BCLK in master mode. */ + SND_SOC_DAPM_SUPPLY("BCLK", ADC3XXX_BCLK_N_DIV, ADC3XXX_ENABLE_BCLK_SHIFT, + 0, NULL, 0), +}; + +static const struct snd_soc_dapm_route adc3xxx_intercon[] = { + /* Left input selection from switches */ + { "Left Input", "IN_1L Capture Switch", "IN_1L" }, + { "Left Input", "IN_2L Capture Switch", "IN_2L" }, + { "Left Input", "IN_3L Capture Switch", "IN_3L" }, + { "Left Input", "DIF_2L_3L Capture Switch", "DIFL_2L_3L" }, + { "Left Input", "DIF_1L_1R Capture Switch", "DIFL_1L_1R" }, + { "Left Input", "DIF_2R_3R Capture Switch", "DIFL_2R_3R" }, + { "Left Input", "IN_1R Capture Switch", "IN_1R" }, + + /* Left input selection to left PGA */ + { "Left PGA", NULL, "Left Input" }, + + /* Left PGA to left ADC */ + { "Left ADC", NULL, "Left PGA" }, + + /* Right input selection from switches */ + { "Right Input", "IN_1R Capture Switch", "IN_1R" }, + { "Right Input", "IN_2R Capture Switch", "IN_2R" }, + { "Right Input", "IN_3R Capture Switch", "IN_3R" }, + { "Right Input", "DIF_2R_3R Capture Switch", "DIFR_2R_3R" }, + { "Right Input", "DIF_1L_1R Capture Switch", "DIFR_1L_1R" }, + { "Right Input", "DIF_2L_3L Capture Switch", "DIFR_2L_3L" }, + { "Right Input", "IN_1L Capture Switch", "IN_1L" }, + + /* Right input selection to right PGA */ + { "Right PGA", NULL, "Right Input" }, + + /* Right PGA to right ADC */ + { "Right ADC", NULL, "Right PGA" }, + + /* Left DMic Input selection from switch */ + { "Left DMic Input", "Left ADC Capture Switch", "DMic_L" }, + + /* Left DMic to left ADC */ + { "Left ADC", NULL, "Left DMic Input" }, + + /* Right DMic Input selection from switch */ + { "Right DMic Input", "Right ADC Capture Switch", "DMic_R" }, + + /* Right DMic to right ADC */ + { "Right ADC", NULL, "Right DMic Input" }, + + /* ADC to AIF output */ + { "AIF_OUT", NULL, "Left ADC" }, + { "AIF_OUT", NULL, "Right ADC" }, + + /* Clocking */ + { "ADC_MOD_CLK", NULL, "ADC_CLK" }, + { "Left ADC", NULL, "ADC_MOD_CLK" }, + { "Right ADC", NULL, "ADC_MOD_CLK" }, + + { "BCLK", NULL, "ADC_CLK" }, +}; + +static const struct snd_soc_dapm_route adc3xxx_pll_intercon[] = { + { "ADC_CLK", NULL, "PLL_CLK" }, +}; + +static const struct snd_soc_dapm_route adc3xxx_bclk_out_intercon[] = { + { "AIF_OUT", NULL, "BCLK" } +}; + +#ifdef CONFIG_GPIOLIB +static int adc3xxx_gpio_request(struct gpio_chip *chip, unsigned int offset) +{ + struct adc3xxx *adc3xxx = gpiochip_get_data(chip); + + if (offset >= ADC3XXX_GPIOS_MAX) + return -EINVAL; + + /* GPIO1 is offset 0, GPIO2 is offset 1 */ + /* We check here that the GPIO pins are either not configured in the + * DT, or that they purposely are set as outputs. + * (Input mode not yet implemented). + */ + if (adc3xxx->gpio_cfg[offset] != 0 && + adc3xxx->gpio_cfg[offset] != ADC3XXX_GPIO_GPO + 1) + return -EINVAL; + + return 0; +} + +static int adc3xxx_gpio_direction_out(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct adc3xxx *adc3xxx = gpiochip_get_data(chip); + + /* Set GPIO output function. */ + return regmap_update_bits(adc3xxx->regmap, + adc3xxx_gpio_ctrl_reg[offset], + ADC3XXX_GPIO_CTRL_CFG_MASK | + ADC3XXX_GPIO_CTRL_OUTPUT_CTRL_MASK, + ADC3XXX_GPIO_GPO << ADC3XXX_GPIO_CTRL_CFG_SHIFT | + !!value << ADC3XXX_GPIO_CTRL_OUTPUT_CTRL_SHIFT); +} + +/* With only GPIO outputs configured, we never get the .direction_out call, + * so we set the output mode and output value in the same call. Hence + * .set in practice does the same thing as .direction_out . + */ +static void adc3xxx_gpio_set(struct gpio_chip *chip, unsigned int offset, + int value) +{ + (void) adc3xxx_gpio_direction_out(chip, offset, value); +} + +/* Even though we only support GPIO output for now, some GPIO clients + * want to read the current pin state using the .get callback. + */ +static int adc3xxx_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + struct adc3xxx *adc3xxx = gpiochip_get_data(chip); + unsigned int regval; + int ret; + + /* We only allow output pins, so just read the value set in the output + * pin register field. + */ + ret = regmap_read(adc3xxx->regmap, adc3xxx_gpio_ctrl_reg[offset], &regval); + if (ret) + return ret; + return !!(regval & ADC3XXX_GPIO_CTRL_OUTPUT_CTRL_MASK); +} + +static const struct gpio_chip adc3xxx_gpio_chip = { + .label = "adc3xxx", + .owner = THIS_MODULE, + .request = adc3xxx_gpio_request, + .direction_output = adc3xxx_gpio_direction_out, + .set = adc3xxx_gpio_set, + .get = adc3xxx_gpio_get, + .can_sleep = 1, +}; + +static void adc3xxx_free_gpio(struct adc3xxx *adc3xxx) +{ + gpiochip_remove(&adc3xxx->gpio_chip); +} + +#endif + +static void adc3xxx_init_gpio(struct adc3xxx *adc3xxx) +{ + int gpio, micbias; +#ifdef CONFIG_GPIOLIB + int ret; + + adc3xxx->gpio_chip = adc3xxx_gpio_chip; + adc3xxx->gpio_chip.ngpio = ADC3XXX_GPIOS_MAX; + adc3xxx->gpio_chip.parent = adc3xxx->dev; + adc3xxx->gpio_chip.base = -1; + + ret = gpiochip_add_data(&adc3xxx->gpio_chip, adc3xxx); + if (ret) + dev_err(adc3xxx->dev, "Failed to add gpios: %d\n", ret); +#endif + + /* Set up potential GPIO configuration from the devicetree. + * This allows us to set up things which are not software + * controllable GPIOs, such as PDM microphone I/O, + */ + for (gpio = 0; gpio < ADC3XXX_GPIOS_MAX; gpio++) { + unsigned int cfg = adc3xxx->gpio_cfg[gpio]; + + if (cfg) { + cfg--; /* actual value to use is stored +1 */ + regmap_update_bits(adc3xxx->regmap, + adc3xxx_gpio_ctrl_reg[gpio], + ADC3XXX_GPIO_CTRL_CFG_MASK, + cfg << ADC3XXX_GPIO_CTRL_CFG_SHIFT); + } + } + + /* Set up micbias voltage */ + for (micbias = 0; micbias < ADC3XXX_MICBIAS_PINS; micbias++) { + unsigned int vg = adc3xxx->micbias_vg[micbias]; + + regmap_update_bits(adc3xxx->regmap, + ADC3XXX_MICBIAS_CTRL, + ADC3XXX_MICBIAS_MASK << adc3xxx_micbias_shift[micbias], + vg << adc3xxx_micbias_shift[micbias]); + } +} + +static int adc3xxx_parse_dt_gpio(struct adc3xxx *adc3xxx, + const char *propname, unsigned int *cfg) +{ + struct device *dev = adc3xxx->dev; + struct device_node *np = dev->of_node; + unsigned int val; + + if (!of_property_read_u32(np, propname, &val)) { + if (val & ~15 || val == 7 || val >= 11) { + dev_err(dev, "Invalid property value for '%s'\n", propname); + return -EINVAL; + } + if (val == ADC3XXX_GPIO_GPI) + dev_warn(dev, "GPIO Input read not yet implemented\n"); + *cfg = val + 1; /* 0 => not set up, all others shifted +1 */ + } + return 0; +} + +static int adc3xxx_parse_dt_micbias(struct adc3xxx *adc3xxx, + const char *propname, unsigned int *vg) +{ + struct device *dev = adc3xxx->dev; + struct device_node *np = dev->of_node; + unsigned int val; + + if (!of_property_read_u32(np, propname, &val)) { + if (val >= ADC3XXX_MICBIAS_AVDD) { + dev_err(dev, "Invalid property value for '%s'\n", propname); + return -EINVAL; + } + *vg = val; + } + return 0; +} + +static int adc3xxx_parse_pll_mode(uint32_t val, unsigned int *pll_mode) +{ + if (val != ADC3XXX_PLL_ENABLE && val != ADC3XXX_PLL_BYPASS && + val != ADC3XXX_PLL_AUTO) + return -EINVAL; + + *pll_mode = val; + + return 0; +} + +static void adc3xxx_setup_pll(struct snd_soc_component *component, + int div_entry) +{ + int i = div_entry; + + /* P & R values */ + snd_soc_component_write(component, ADC3XXX_PLL_PROG_PR, + (adc3xxx_divs[i].pll_p << ADC3XXX_PLLP_SHIFT) | + (adc3xxx_divs[i].pll_r << ADC3XXX_PLLR_SHIFT)); + /* J value */ + snd_soc_component_write(component, ADC3XXX_PLL_PROG_J, + adc3xxx_divs[i].pll_j & ADC3XXX_PLLJ_MASK); + /* D value */ + snd_soc_component_write(component, ADC3XXX_PLL_PROG_D_LSB, + adc3xxx_divs[i].pll_d & ADC3XXX_PLLD_LSB_MASK); + snd_soc_component_write(component, ADC3XXX_PLL_PROG_D_MSB, + (adc3xxx_divs[i].pll_d >> 8) & ADC3XXX_PLLD_MSB_MASK); +} + +static int adc3xxx_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(dai->component); + struct adc3xxx *adc3xxx = snd_soc_component_get_drvdata(component); + int i, width = 16; + u8 iface_len, bdiv; + + i = adc3xxx_get_divs(component->dev, adc3xxx->sysclk, + params_rate(params), adc3xxx->pll_mode); + + if (i < 0) + return i; + + /* select data word length */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + iface_len = ADC3XXX_IFACE_16BITS; + width = 16; + break; + case SNDRV_PCM_FORMAT_S20_3LE: + iface_len = ADC3XXX_IFACE_20BITS; + width = 20; + break; + case SNDRV_PCM_FORMAT_S24_LE: + iface_len = ADC3XXX_IFACE_24BITS; + width = 24; + break; + case SNDRV_PCM_FORMAT_S32_LE: + iface_len = ADC3XXX_IFACE_32BITS; + width = 32; + break; + default: + dev_err(component->dev, "Unsupported serial data format\n"); + return -EINVAL; + } + snd_soc_component_update_bits(component, ADC3XXX_INTERFACE_CTRL_1, + ADC3XXX_WLENGTH_MASK, iface_len); + if (adc3xxx_divs[i].pll_p) { /* If PLL used for this mode */ + adc3xxx_setup_pll(component, i); + snd_soc_component_write(component, ADC3XXX_CLKGEN_MUX, ADC3XXX_USE_PLL); + if (!adc3xxx->use_pll) { + snd_soc_dapm_add_routes(dapm, adc3xxx_pll_intercon, + ARRAY_SIZE(adc3xxx_pll_intercon)); + adc3xxx->use_pll = 1; + } + } else { + snd_soc_component_write(component, ADC3XXX_CLKGEN_MUX, ADC3XXX_NO_PLL); + if (adc3xxx->use_pll) { + snd_soc_dapm_del_routes(dapm, adc3xxx_pll_intercon, + ARRAY_SIZE(adc3xxx_pll_intercon)); + adc3xxx->use_pll = 0; + } + } + + /* NADC */ + snd_soc_component_update_bits(component, ADC3XXX_ADC_NADC, + ADC3XXX_NADC_MASK, adc3xxx_divs[i].nadc); + /* MADC */ + snd_soc_component_update_bits(component, ADC3XXX_ADC_MADC, + ADC3XXX_MADC_MASK, adc3xxx_divs[i].madc); + /* AOSR */ + snd_soc_component_update_bits(component, ADC3XXX_ADC_AOSR, + ADC3XXX_AOSR_MASK, adc3xxx_divs[i].aosr); + /* BDIV N Value */ + /* BCLK is (by default) set up to be derived from ADC_CLK */ + bdiv = (adc3xxx_divs[i].aosr * adc3xxx_divs[i].madc) / (2 * width); + snd_soc_component_update_bits(component, ADC3XXX_BCLK_N_DIV, + ADC3XXX_BDIV_MASK, bdiv); + + return 0; +} + +static const char *adc3xxx_pll_mode_text(int pll_mode) +{ + switch (pll_mode) { + case ADC3XXX_PLL_AUTO: + return "PLL auto"; + case ADC3XXX_PLL_ENABLE: + return "PLL enable"; + case ADC3XXX_PLL_BYPASS: + return "PLL bypass"; + default: + break; + } + + return "PLL unknown"; +} + +static int adc3xxx_set_dai_sysclk(struct snd_soc_dai *codec_dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_component *component = codec_dai->component; + struct adc3xxx *adc3xxx = snd_soc_component_get_drvdata(component); + int ret; + + ret = adc3xxx_parse_pll_mode(clk_id, &adc3xxx->pll_mode); + if (ret < 0) + return ret; + + adc3xxx->sysclk = freq; + dev_dbg(component->dev, "Set sysclk to %u Hz, %s\n", + freq, adc3xxx_pll_mode_text(adc3xxx->pll_mode)); + return 0; +} + +static int adc3xxx_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) +{ + struct snd_soc_component *component = codec_dai->component; + struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component); + struct adc3xxx *adc3xxx = snd_soc_component_get_drvdata(component); + u8 clkdir = 0, format = 0; + int master = 0; + + /* set master/slave audio interface */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBP_CFP: + master = 1; + clkdir = ADC3XXX_BCLK_MASTER | ADC3XXX_WCLK_MASTER; + break; + case SND_SOC_DAIFMT_CBC_CFC: + master = 0; + break; + default: + dev_err(component->dev, "Invalid DAI clock setup\n"); + return -EINVAL; + } + + /* + * match both interface format and signal polarities since they + * are fixed + */ + switch (fmt & (SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_INV_MASK)) { + case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF: + format = ADC3XXX_FORMAT_I2S; + break; + case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_IB_NF: + format = ADC3XXX_FORMAT_DSP; + break; + case SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_IB_NF: + format = ADC3XXX_FORMAT_DSP; + break; + case SND_SOC_DAIFMT_RIGHT_J | SND_SOC_DAIFMT_NB_NF: + format = ADC3XXX_FORMAT_RJF; + break; + case SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_NB_NF: + format = ADC3XXX_FORMAT_LJF; + break; + default: + dev_err(component->dev, "Invalid DAI format\n"); + return -EINVAL; + } + + /* Add/del route enabling BCLK output as applicable */ + if (master && !adc3xxx->master) + snd_soc_dapm_add_routes(dapm, adc3xxx_bclk_out_intercon, + ARRAY_SIZE(adc3xxx_bclk_out_intercon)); + else if (!master && adc3xxx->master) + snd_soc_dapm_del_routes(dapm, adc3xxx_bclk_out_intercon, + ARRAY_SIZE(adc3xxx_bclk_out_intercon)); + adc3xxx->master = master; + + /* set clock direction and format */ + return snd_soc_component_update_bits(component, + ADC3XXX_INTERFACE_CTRL_1, + ADC3XXX_CLKDIR_MASK | ADC3XXX_FORMAT_MASK, + clkdir | format); +} + +static struct snd_soc_dai_ops adc3xxx_dai_ops = { + .hw_params = adc3xxx_hw_params, + .set_sysclk = adc3xxx_set_dai_sysclk, + .set_fmt = adc3xxx_set_dai_fmt, +}; + +struct snd_soc_dai_driver adc3xxx_dai = { + .name = "tlv320adc3xxx-hifi", + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 2, + .rates = ADC3XXX_RATES, + .formats = ADC3XXX_FORMATS, + }, + .ops = &adc3xxx_dai_ops, +}; + +static const struct snd_soc_component_driver soc_component_dev_adc3xxx = { + .controls = adc3xxx_snd_controls, + .num_controls = ARRAY_SIZE(adc3xxx_snd_controls), + .dapm_widgets = adc3xxx_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(adc3xxx_dapm_widgets), + .dapm_routes = adc3xxx_intercon, + .num_dapm_routes = ARRAY_SIZE(adc3xxx_intercon), +}; + +static int adc3xxx_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct device *dev = &i2c->dev; + struct device_node *np = dev->of_node; + struct adc3xxx *adc3xxx = NULL; + enum of_gpio_flags flags; + int ret; + + adc3xxx = devm_kzalloc(dev, sizeof(struct adc3xxx), GFP_KERNEL); + if (!adc3xxx) + return -ENOMEM; + adc3xxx->dev = dev; + + adc3xxx->mclk = devm_clk_get(dev, NULL); + if (IS_ERR(adc3xxx->mclk)) { + /* + * The chip itself supports running off the BCLK either + * directly or via the PLL, but the driver does not (yet), so + * having a specified mclk is required. Otherwise, we could + * use the lack of a clocks property to indicate when BCLK is + * intended as the clock source. + */ + return PTR_ERR(adc3xxx->mclk); + } else if (adc3xxx->mclk) { + ret = clk_prepare_enable(adc3xxx->mclk); + if (ret < 0) + return ret; + dev_dbg(dev, "Enabled MCLK, freq %lu Hz\n", clk_get_rate(adc3xxx->mclk)); + } + + adc3xxx_parse_dt_gpio(adc3xxx, "ti,dmdin-gpio1", &adc3xxx->gpio_cfg[0]); + adc3xxx_parse_dt_gpio(adc3xxx, "ti,dmclk-gpio2", &adc3xxx->gpio_cfg[1]); + adc3xxx_parse_dt_micbias(adc3xxx, "ti,micbias1-vg", &adc3xxx->micbias_vg[0]); + adc3xxx_parse_dt_micbias(adc3xxx, "ti,micbias2-vg", &adc3xxx->micbias_vg[1]); + + adc3xxx->regmap = devm_regmap_init_i2c(i2c, &adc3xxx_regmap); + if (IS_ERR(adc3xxx->regmap)) { + ret = PTR_ERR(adc3xxx->regmap); + return ret; + } + + i2c_set_clientdata(i2c, adc3xxx); + + adc3xxx->rst_pin = of_get_named_gpio_flags(np, "reset-gpios", 0, &flags); + if (adc3xxx->rst_pin < 0 || !gpio_is_valid(adc3xxx->rst_pin)) + return -ENXIO; + + adc3xxx->rst_active = !(flags & OF_GPIO_ACTIVE_LOW); + adc3xxx->type = id->driver_data; + + ret = devm_gpio_request(dev, adc3xxx->rst_pin, "adc3xxx reset"); + if (ret < 0) { + dev_err(dev, "Failed to request rst_pin: %d\n", ret); + return ret; + } + + /* Reset codec chip */ + gpio_direction_output(adc3xxx->rst_pin, adc3xxx->rst_active); + usleep_range(2000, 100000); /* Requirement: > 10 ns (datasheet p13) */ + gpio_direction_output(adc3xxx->rst_pin, !adc3xxx->rst_active); + + /* Potentially set up pins used as GPIOs */ + adc3xxx_init_gpio(adc3xxx); + + ret = snd_soc_register_component(dev, + &soc_component_dev_adc3xxx, &adc3xxx_dai, 1); + if (ret < 0) + dev_err(dev, "Failed to register codec: %d\n", ret); + + return ret; +} + +static int __exit adc3xxx_i2c_remove(struct i2c_client *client) +{ + struct adc3xxx *adc3xxx = i2c_get_clientdata(client); + + if (adc3xxx->mclk) + clk_disable_unprepare(adc3xxx->mclk); +#ifdef CONFIG_GPIOLIB + adc3xxx_free_gpio(adc3xxx); +#endif + snd_soc_unregister_component(&client->dev); + return 0; +} + +static const struct of_device_id tlv320adc3xxx_of_match[] = { + { .compatible = "ti,tlv320adc3001", }, + { .compatible = "ti,tlv320adc3101", }, + {}, +}; +MODULE_DEVICE_TABLE(of, tlv320adc3xxx_of_match); + +static const struct i2c_device_id adc3xxx_i2c_id[] = { + { "tlv320adc3001", ADC3001 }, + { "tlv320adc3101", ADC3101 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, adc3xxx_i2c_id); + +static struct i2c_driver adc3xxx_i2c_driver = { + .driver = { + .name = "tlv320adc3xxx-codec", + .of_match_table = tlv320adc3xxx_of_match, + }, + .probe = adc3xxx_i2c_probe, + .remove = adc3xxx_i2c_remove, + .id_table = adc3xxx_i2c_id, +}; + +module_i2c_driver(adc3xxx_i2c_driver); + +MODULE_DESCRIPTION("ASoC TLV320ADC3xxx codec driver"); +MODULE_AUTHOR(" shahina.s(a)mistralsolutions.com "); +MODULE_LICENSE("GPL v2"); diff --git a/sound/soc/codecs/tlv320adc3xxx.h b/sound/soc/codecs/tlv320adc3xxx.h new file mode 100644 index 000000000000..82f82c3e7bc5 --- /dev/null +++ b/sound/soc/codecs/tlv320adc3xxx.h @@ -0,0 +1,379 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Based on sound/soc/codecs/tlv320aic3x.c by Vladimir Barinov + * + * History: + * + * Author: "Shahina Shaik" < shahina.s(a)mistralsolutions.com > + * Copyright: (C) 2010 Mistral Solutions Pvt Ltd. + * + * Author: Dongge wu <dgwu(a)ambarella.com> + * 2015/10/28 - [Dongge wu] Created file + * Copyright (C) 2014-2018, Ambarella, Inc. + * + * Author: Ricard Wanderlof <ricardw(a)axis.com> + * 2020/11/05: Fixing driver for Linux 4.14: more clocking modes, etc. + * 2021/09/03: Porting to Linux 5.4, with enhancements. + * Copyright (C) 2021 Axis Communications AB + * + */ + +#ifndef _ADC3XXX_H +#define _ADC3XXX_H + +/* 8 bit mask value */ +#define ADC3XXX_8BITS_MASK 0xFF + +#define ADC3XXX_PAGE_SIZE 128 +#define ADC3XXX_REG(page, reg) ((page * ADC3XXX_PAGE_SIZE) + reg) + +#define ADC3XXX_MICBIAS_PINS 2 + +/* Number of GPIO pins exposed via the gpiolib interface */ +#define ADC3XXX_GPIOS_MAX 2 + +/* + * PLL modes, to be used for clk_id for set_sysclk callback. + * + * The default behavior (AUTO) is to take the first matching entry in the clock + * table, which is intended to be the PLL based one if there is more than one. + * + * Setting the clock source using simple-card (clocks or + * system-clock-frequency property) sets clk_id = 0 = ADC3XXX_PLL_AUTO. + */ +#define ADC3XXX_PLL_AUTO 0 /* Use first available mode */ +#define ADC3XXX_PLL_ENABLE 1 /* Use PLL for clock generation */ +#define ADC3XXX_PLL_BYPASS 2 /* Don't use PLL for clock generation */ + + +/****************************************************************************/ +/* Page 0 Registers */ +/****************************************************************************/ + +/* Page select register */ +#define ADC3XXX_PAGE_SELECT ADC3XXX_REG(0, 0) +/* Software reset register */ +#define ADC3XXX_RESET ADC3XXX_REG(0, 1) + +/* 2-3 Reserved */ + +/* PLL programming register B */ +#define ADC3XXX_CLKGEN_MUX ADC3XXX_REG(0, 4) +/* PLL P and R-Val */ +#define ADC3XXX_PLL_PROG_PR ADC3XXX_REG(0, 5) +/* PLL J-Val */ +#define ADC3XXX_PLL_PROG_J ADC3XXX_REG(0, 6) +/* PLL D-Val MSB */ +#define ADC3XXX_PLL_PROG_D_MSB ADC3XXX_REG(0, 7) +/* PLL D-Val LSB */ +#define ADC3XXX_PLL_PROG_D_LSB ADC3XXX_REG(0, 8) + +/* 9-17 Reserved */ + +/* ADC NADC */ +#define ADC3XXX_ADC_NADC ADC3XXX_REG(0, 18) +/* ADC MADC */ +#define ADC3XXX_ADC_MADC ADC3XXX_REG(0, 19) +/* ADC AOSR */ +#define ADC3XXX_ADC_AOSR ADC3XXX_REG(0, 20) +/* ADC IADC */ +#define ADC3XXX_ADC_IADC ADC3XXX_REG(0, 21) + +/* 23-24 Reserved */ + +/* CLKOUT MUX */ +#define ADC3XXX_CLKOUT_MUX ADC3XXX_REG(0, 25) +/* CLOCKOUT M divider value */ +#define ADC3XXX_CLKOUT_M_DIV ADC3XXX_REG(0, 26) +/*Audio Interface Setting Register 1*/ +#define ADC3XXX_INTERFACE_CTRL_1 ADC3XXX_REG(0, 27) +/* Data Slot Offset (Ch_Offset_1) */ +#define ADC3XXX_CH_OFFSET_1 ADC3XXX_REG(0, 28) +/* ADC interface control 2 */ +#define ADC3XXX_INTERFACE_CTRL_2 ADC3XXX_REG(0, 29) +/* BCLK N Divider */ +#define ADC3XXX_BCLK_N_DIV ADC3XXX_REG(0, 30) +/* Secondary audio interface control 1 */ +#define ADC3XXX_INTERFACE_CTRL_3 ADC3XXX_REG(0, 31) +/* Secondary audio interface control 2 */ +#define ADC3XXX_INTERFACE_CTRL_4 ADC3XXX_REG(0, 32) +/* Secondary audio interface control 3 */ +#define ADC3XXX_INTERFACE_CTRL_5 ADC3XXX_REG(0, 33) +/* I2S sync */ +#define ADC3XXX_I2S_SYNC ADC3XXX_REG(0, 34) + +/* 35 Reserved */ + +/* ADC flag register */ +#define ADC3XXX_ADC_FLAG ADC3XXX_REG(0, 36) +/* Data slot offset 2 (Ch_Offset_2) */ +#define ADC3XXX_CH_OFFSET_2 ADC3XXX_REG(0, 37) +/* I2S TDM control register */ +#define ADC3XXX_I2S_TDM_CTRL ADC3XXX_REG(0, 38) + +/* 39-41 Reserved */ + +/* Interrupt flags (overflow) */ +#define ADC3XXX_INTR_FLAG_1 ADC3XXX_REG(0, 42) +/* Interrupt flags (overflow) */ +#define ADC3XXX_INTR_FLAG_2 ADC3XXX_REG(0, 43) + +/* 44 Reserved */ + +/* Interrupt flags ADC */ +#define ADC3XXX_INTR_FLAG_ADC1 ADC3XXX_REG(0, 45) + +/* 46 Reserved */ + +/* Interrupt flags ADC */ +#define ADC3XXX_INTR_FLAG_ADC2 ADC3XXX_REG(0, 47) +/* INT1 interrupt control */ +#define ADC3XXX_INT1_CTRL ADC3XXX_REG(0, 48) +/* INT2 interrupt control */ +#define ADC3XXX_INT2_CTRL ADC3XXX_REG(0, 49) + +/* 50 Reserved */ + +/* DMCLK/GPIO2 control */ +#define ADC3XXX_GPIO2_CTRL ADC3XXX_REG(0, 51) +/* DMDIN/GPIO1 control */ +#define ADC3XXX_GPIO1_CTRL ADC3XXX_REG(0, 52) +/* DOUT Control */ +#define ADC3XXX_DOUT_CTRL ADC3XXX_REG(0, 53) + +/* 54-56 Reserved */ + +/* ADC sync control 1 */ +#define ADC3XXX_SYNC_CTRL_1 ADC3XXX_REG(0, 57) +/* ADC sync control 2 */ +#define ADC3XXX_SYNC_CTRL_2 ADC3XXX_REG(0, 58) +/* ADC CIC filter gain control */ +#define ADC3XXX_CIC_GAIN_CTRL ADC3XXX_REG(0, 59) + +/* 60 Reserved */ + +/* ADC processing block selection */ +#define ADC3XXX_PRB_SELECT ADC3XXX_REG(0, 61) +/* Programmable instruction mode control bits */ +#define ADC3XXX_INST_MODE_CTRL ADC3XXX_REG(0, 62) + +/* 63-79 Reserved */ + +/* Digital microphone polarity control */ +#define ADC3XXX_MIC_POLARITY_CTRL ADC3XXX_REG(0, 80) +/* ADC Digital */ +#define ADC3XXX_ADC_DIGITAL ADC3XXX_REG(0, 81) +/* ADC Fine Gain Adjust */ +#define ADC3XXX_ADC_FGA ADC3XXX_REG(0, 82) +/* Left ADC Channel Volume Control */ +#define ADC3XXX_LADC_VOL ADC3XXX_REG(0, 83) +/* Right ADC Channel Volume Control */ +#define ADC3XXX_RADC_VOL ADC3XXX_REG(0, 84) +/* ADC phase compensation */ +#define ADC3XXX_ADC_PHASE_COMP ADC3XXX_REG(0, 85) +/* Left Channel AGC Control Register 1 */ +#define ADC3XXX_LEFT_CHN_AGC_1 ADC3XXX_REG(0, 86) +/* Left Channel AGC Control Register 2 */ +#define ADC3XXX_LEFT_CHN_AGC_2 ADC3XXX_REG(0, 87) +/* Left Channel AGC Control Register 3 */ +#define ADC3XXX_LEFT_CHN_AGC_3 ADC3XXX_REG(0, 88) +/* Left Channel AGC Control Register 4 */ +#define ADC3XXX_LEFT_CHN_AGC_4 ADC3XXX_REG(0, 89) +/* Left Channel AGC Control Register 5 */ +#define ADC3XXX_LEFT_CHN_AGC_5 ADC3XXX_REG(0, 90) +/* Left Channel AGC Control Register 6 */ +#define ADC3XXX_LEFT_CHN_AGC_6 ADC3XXX_REG(0, 91) +/* Left Channel AGC Control Register 7 */ +#define ADC3XXX_LEFT_CHN_AGC_7 ADC3XXX_REG(0, 92) +/* Left AGC gain */ +#define ADC3XXX_LEFT_AGC_GAIN ADC3XXX_REG(0, 93) +/* Right Channel AGC Control Register 1 */ +#define ADC3XXX_RIGHT_CHN_AGC_1 ADC3XXX_REG(0, 94) +/* Right Channel AGC Control Register 2 */ +#define ADC3XXX_RIGHT_CHN_AGC_2 ADC3XXX_REG(0, 95) +/* Right Channel AGC Control Register 3 */ +#define ADC3XXX_RIGHT_CHN_AGC_3 ADC3XXX_REG(0, 96) +/* Right Channel AGC Control Register 4 */ +#define ADC3XXX_RIGHT_CHN_AGC_4 ADC3XXX_REG(0, 97) +/* Right Channel AGC Control Register 5 */ +#define ADC3XXX_RIGHT_CHN_AGC_5 ADC3XXX_REG(0, 98) +/* Right Channel AGC Control Register 6 */ +#define ADC3XXX_RIGHT_CHN_AGC_6 ADC3XXX_REG(0, 99) +/* Right Channel AGC Control Register 7 */ +#define ADC3XXX_RIGHT_CHN_AGC_7 ADC3XXX_REG(0, 100) +/* Right AGC gain */ +#define ADC3XXX_RIGHT_AGC_GAIN ADC3XXX_REG(0, 101) + +/* 102-127 Reserved */ + +/****************************************************************************/ +/* Page 1 Registers */ +/****************************************************************************/ +/* 1-25 Reserved */ + +/* Dither control */ +#define ADC3XXX_DITHER_CTRL ADC3XXX_REG(1, 26) + +/* 27-50 Reserved */ + +/* MICBIAS Configuration Register */ +#define ADC3XXX_MICBIAS_CTRL ADC3XXX_REG(1, 51) +/* Left ADC input selection for Left PGA */ +#define ADC3XXX_LEFT_PGA_SEL_1 ADC3XXX_REG(1, 52) + +/* 53 Reserved */ + +/* Right ADC input selection for Left PGA */ +#define ADC3XXX_LEFT_PGA_SEL_2 ADC3XXX_REG(1, 54) +/* Right ADC input selection for right PGA */ +#define ADC3XXX_RIGHT_PGA_SEL_1 ADC3XXX_REG(1, 55) + +/* 56 Reserved */ + +/* Right ADC input selection for right PGA */ +#define ADC3XXX_RIGHT_PGA_SEL_2 ADC3XXX_REG(1, 57) + +/* 58 Reserved */ + +/* Left analog PGA settings */ +#define ADC3XXX_LEFT_APGA_CTRL ADC3XXX_REG(1, 59) +/* Right analog PGA settings */ +#define ADC3XXX_RIGHT_APGA_CTRL ADC3XXX_REG(1, 60) +/* ADC Low current Modes */ +#define ADC3XXX_LOW_CURRENT_MODES ADC3XXX_REG(1, 61) +/* ADC analog PGA flags */ +#define ADC3XXX_ANALOG_PGA_FLAGS ADC3XXX_REG(1, 62) + +/* 63-127 Reserved */ + +/****************************************************************************/ +/* Macros and definitions */ +/****************************************************************************/ + +#define ADC3XXX_RATES SNDRV_PCM_RATE_8000_96000 +#define ADC3XXX_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S20_3LE | \ + SNDRV_PCM_FMTBIT_S24_3LE | \ + SNDRV_PCM_FMTBIT_S32_LE) + +/****************************************************************************/ +/* ADC3XXX Register bits */ +/****************************************************************************/ +/* PLL Enable bits */ +#define ADC3XXX_ENABLE_PLL_SHIFT 7 +#define ADC3XXX_ENABLE_PLL (1 << ADC3XXX_ENABLE_PLL_SHIFT) +#define ADC3XXX_ENABLE_NADC_SHIFT 7 +#define ADC3XXX_ENABLE_NADC (1 << ADC3XXX_ENABLE_NADC_SHIFT) +#define ADC3XXX_ENABLE_MADC_SHIFT 7 +#define ADC3XXX_ENABLE_MADC (1 << ADC3XXX_ENABLE_MADC_SHIFT) +#define ADC3XXX_ENABLE_BCLK_SHIFT 7 +#define ADC3XXX_ENABLE_BCLK (1 << ADC3XXX_ENABLE_BCLK_SHIFT) + +/* Power bits */ +#define ADC3XXX_LADC_PWR_ON 0x80 +#define ADC3XXX_RADC_PWR_ON 0x40 + +#define ADC3XXX_SOFT_RESET 0x01 +#define ADC3XXX_BCLK_MASTER 0x08 +#define ADC3XXX_WCLK_MASTER 0x04 + +/* Interface register masks */ +#define ADC3XXX_FORMAT_MASK 0xc0 +#define ADC3XXX_FORMAT_SHIFT 6 +#define ADC3XXX_WLENGTH_MASK 0x30 +#define ADC3XXX_WLENGTH_SHIFT 4 +#define ADC3XXX_CLKDIR_MASK 0x0c +#define ADC3XXX_CLKDIR_SHIFT 2 + +/* Interface register bit patterns */ +#define ADC3XXX_FORMAT_I2S (0 << ADC3XXX_FORMAT_SHIFT) +#define ADC3XXX_FORMAT_DSP (1 << ADC3XXX_FORMAT_SHIFT) +#define ADC3XXX_FORMAT_RJF (2 << ADC3XXX_FORMAT_SHIFT) +#define ADC3XXX_FORMAT_LJF (3 << ADC3XXX_FORMAT_SHIFT) + +#define ADC3XXX_IFACE_16BITS (0 << ADC3XXX_WLENGTH_SHIFT) +#define ADC3XXX_IFACE_20BITS (1 << ADC3XXX_WLENGTH_SHIFT) +#define ADC3XXX_IFACE_24BITS (2 << ADC3XXX_WLENGTH_SHIFT) +#define ADC3XXX_IFACE_32BITS (3 << ADC3XXX_WLENGTH_SHIFT) + +/* PLL P/R bit offsets */ +#define ADC3XXX_PLLP_SHIFT 4 +#define ADC3XXX_PLLR_SHIFT 0 +#define ADC3XXX_PLL_PR_MASK 0x7f +#define ADC3XXX_PLLJ_MASK 0x3f +#define ADC3XXX_PLLD_MSB_MASK 0x3f +#define ADC3XXX_PLLD_LSB_MASK 0xff +#define ADC3XXX_NADC_MASK 0x7f +#define ADC3XXX_MADC_MASK 0x7f +#define ADC3XXX_AOSR_MASK 0xff +#define ADC3XXX_IADC_MASK 0xff +#define ADC3XXX_BDIV_MASK 0x7f + +/* PLL_CLKIN bits */ +#define ADC3XXX_PLL_CLKIN_SHIFT 2 +#define ADC3XXX_PLL_CLKIN_MCLK 0x0 +#define ADC3XXX_PLL_CLKIN_BCLK 0x1 +#define ADC3XXX_PLL_CLKIN_ZERO 0x3 + +/* CODEC_CLKIN bits */ +#define ADC3XXX_CODEC_CLKIN_SHIFT 0 +#define ADC3XXX_CODEC_CLKIN_MCLK 0x0 +#define ADC3XXX_CODEC_CLKIN_BCLK 0x1 +#define ADC3XXX_CODEC_CLKIN_PLL_CLK 0x3 + +#define ADC3XXX_USE_PLL ((ADC3XXX_PLL_CLKIN_MCLK << ADC3XXX_PLL_CLKIN_SHIFT) | \ + (ADC3XXX_CODEC_CLKIN_PLL_CLK << ADC3XXX_CODEC_CLKIN_SHIFT)) +#define ADC3XXX_NO_PLL ((ADC3XXX_PLL_CLKIN_ZERO << ADC3XXX_PLL_CLKIN_SHIFT) | \ + (ADC3XXX_CODEC_CLKIN_MCLK << ADC3XXX_CODEC_CLKIN_SHIFT)) + +/* Analog PGA control bits */ +#define ADC3XXX_LPGA_MUTE 0x80 +#define ADC3XXX_RPGA_MUTE 0x80 + +#define ADC3XXX_LPGA_GAIN_MASK 0x7f +#define ADC3XXX_RPGA_GAIN_MASK 0x7f + +/* ADC current modes */ +#define ADC3XXX_ADC_LOW_CURR_MODE 0x01 + +/* Left ADC Input selection bits */ +#define ADC3XXX_LCH_SEL1_SHIFT 0 +#define ADC3XXX_LCH_SEL2_SHIFT 2 +#define ADC3XXX_LCH_SEL3_SHIFT 4 +#define ADC3XXX_LCH_SEL4_SHIFT 6 + +#define ADC3XXX_LCH_SEL1X_SHIFT 0 +#define ADC3XXX_LCH_SEL2X_SHIFT 2 +#define ADC3XXX_LCH_SEL3X_SHIFT 4 +#define ADC3XXX_LCH_COMMON_MODE 0x40 +#define ADC3XXX_BYPASS_LPGA 0x80 + +/* Right ADC Input selection bits */ +#define ADC3XXX_RCH_SEL1_SHIFT 0 +#define ADC3XXX_RCH_SEL2_SHIFT 2 +#define ADC3XXX_RCH_SEL3_SHIFT 4 +#define ADC3XXX_RCH_SEL4_SHIFT 6 + +#define ADC3XXX_RCH_SEL1X_SHIFT 0 +#define ADC3XXX_RCH_SEL2X_SHIFT 2 +#define ADC3XXX_RCH_SEL3X_SHIFT 4 +#define ADC3XXX_RCH_COMMON_MODE 0x40 +#define ADC3XXX_BYPASS_RPGA 0x80 + +/* MICBIAS control bits */ +#define ADC3XXX_MICBIAS_MASK 0x2 +#define ADC3XXX_MICBIAS1_SHIFT 5 +#define ADC3XXX_MICBIAS2_SHIFT 3 + +#define ADC3XXX_ADC_MAX_VOLUME 64 +#define ADC3XXX_ADC_POS_VOL 24 + +/* GPIO control bits (GPIO1_CTRL and GPIO2_CTRL) */ +#define ADC3XXX_GPIO_CTRL_CFG_MASK 0x3c +#define ADC3XXX_GPIO_CTRL_CFG_SHIFT 2 +#define ADC3XXX_GPIO_CTRL_OUTPUT_CTRL_MASK 0x01 +#define ADC3XXX_GPIO_CTRL_OUTPUT_CTRL_SHIFT 0 +#define ADC3XXX_GPIO_CTRL_INPUT_VALUE_MASK 0x02 +#define ADC3XXX_GPIO_CTRL_INPUT_VALUE_SHIFT 1 + +#endif /* _ADC3XXX_H */ -- 2.20.1 -- Ricard Wolf Wanderlof ricardw(at)axis.com Axis Communications AB, Lund, Sweden www.axis.com Phone +46 46 272 2016 Fax +46 46 13 61 30

2 1

[RESEND PATCH 00/10] ASoC: Intel: sof_sdw: Use fixed DAI link id
by Bard Liao 15 Nov '21

15 Nov '21

This series provides a way to use constant dailink numbers for different devices. So that we don't need to renumber them in topologies. Some patches with different purpose are sent together in this series since they are dependent. Bard Liao (8): ASoC: intel: sof_sdw: return the original error number ASoC: intel: sof_sdw: rename be_index/link_id to link_index ASoC: intel: sof_sdw: Use a fixed DAI link id for AMP ASoC: intel: sof_sdw: move DMIC link id overwrite to create_sdw_dailink ASoC: intel: sof_sdw: remove SOF_RT715_DAI_ID_FIX quirk ASoC: intel: sof_sdw: remove sof_sdw_mic_codec_mockup_init ASoC: intel: sof_sdw: remove get_next_be_id ASoC: intel: sof_sdw: add link adr order check Pierre-Louis Bossart (2): ASoC: Intel: sof_sdw: fix jack detection on HP Spectre x360 convertible ASoC: Intel: sof_sdw: add SKU for Dell Latitude 9520 sound/soc/intel/boards/sof_sdw.c | 152 ++++++++++---------- sound/soc/intel/boards/sof_sdw_common.h | 7 +- sound/soc/intel/boards/sof_sdw_rt715.c | 7 - sound/soc/intel/boards/sof_sdw_rt715_sdca.c | 7 - 4 files changed, 85 insertions(+), 88 deletions(-) -- 2.17.1

2 11

hw: add option to specify dynamic DAPM routing to apply when the plugin is opened
by GitHub pull_request - opened 15 Nov '21

15 Nov '21

alsa-project/alsa-lib pull request #192 was opened from bku-sue: The kernel's sound soc subsystem has a DAPM functionality, which makes complex audio routing easy, and most of it is done inside the kernel. However, in the case of dynamic routing (when there is a multiplexer in the signal path), the multiplexer is exposed as an enum MIXER control which must be set from userspace. As the selection of these controls directly influences what audio path is captured/played, the sensible thing to do is to create multiple HW plugins in the ALSA conf, each referring to the same HW device number, but with different routing parameters. Request URL : https://github.com/alsa-project/alsa-lib/pull/192 Patch URL : https://github.com/alsa-project/alsa-lib/pull/192.patch Repository URL: https://github.com/alsa-project/alsa-lib

1 0