November 2021 - Alsa-devel - mailman.alsa-project.org

[PATCH v1 00/20] Support HDMI audio on NVIDIA Tegra20
by Dmitry Osipenko 26 Nov '21

26 Nov '21

This series revives Tegra20 S/PDIF driver which was upstreamed long time ago, but never was used. It also turns Tegra DRM HDMI driver into HDMI audio CODEC provider. Finally, HDMI audio is enabled in device-trees. For now the audio is enable only for Acer A500 tablet and Toshiba AC100 netbook because they're already supported by upstream, later on ASUS TF101 tablet will join them. I based S/PDIF patches on Arnd's Bergmann patch from a separate series [1] that removes obsolete slave_id. This eases merging of the patches by removing the merge conflict. [1] https://patchwork.ozlabs.org/project/linux-tegra/list/?submitter=80402 Arnd Bergmann (1): ASoC: tegra20-spdif: stop setting slave_id Dmitry Osipenko (19): ASoC: dt-bindings: Add binding for Tegra20 S/PDIF ASoC: dt-bindings: tegra20-i2s: Convert to schema ASoC: dt-bindings: tegra20-i2s: Document new nvidia,fixed-parent-rate property dt-bindings: host1x: Document optional HDMI sound-dai-cells ASoC: tegra20: spdif: Support device-tree ASoC: tegra20: spdif: Set FIFO trigger level ASoC: tegra20: spdif: Improve driver's code ASoC: tegra20: spdif: Use more resource-managed helpers ASoC: tegra20: spdif: Reset hardware ASoC: tegra20: spdif: Support system suspend ASoC: tegra20: spdif: Filter out unsupported rates ASoC: tegra20: i2s: Filter out unsupported rates drm/tegra: hdmi: Unwind tegra_hdmi_init() errors drm/tegra: hdmi: Register audio CODEC on Tegra20 ARM: tegra_defconfig: Enable S/PDIF driver ARM: tegra: Add S/PDIF node to Tegra20 device-tree ARM: tegra: Add HDMI audio graph to Tegra20 device-tree ARM: tegra: acer-a500: Enable S/PDIF and HDMI audio ARM: tegra: paz00: Enable S/PDIF and HDMI audio .../display/tegra/nvidia,tegra20-host1x.txt | 1 + .../bindings/sound/nvidia,tegra20-i2s.txt | 30 --- .../bindings/sound/nvidia,tegra20-i2s.yaml | 78 +++++++ .../bindings/sound/nvidia,tegra20-spdif.yaml | 88 ++++++++ .../boot/dts/tegra20-acer-a500-picasso.dts | 8 + arch/arm/boot/dts/tegra20-paz00.dts | 8 + arch/arm/boot/dts/tegra20.dtsi | 40 +++- arch/arm/configs/tegra_defconfig | 1 + drivers/gpu/drm/tegra/Kconfig | 3 + drivers/gpu/drm/tegra/hdmi.c | 168 +++++++++++++-- sound/soc/tegra/tegra20_i2s.c | 49 +++++ sound/soc/tegra/tegra20_spdif.c | 195 +++++++++++++----- sound/soc/tegra/tegra20_spdif.h | 1 + sound/soc/tegra/tegra_pcm.c | 6 + sound/soc/tegra/tegra_pcm.h | 1 + 15 files changed, 575 insertions(+), 102 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.yaml create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra20-spdif.yaml -- 2.33.1

3 29

[PATCH v2] ASoC: dt-bindings: davinci-mcasp: convert McASP bindings to yaml schema
by Jayesh Choudhary 25 Nov '21

25 Nov '21

Convert the bindings for McASP controllers for TI SOCs from txt to YAML schema. Adds additional properties 'clocks', 'clock-names', 'power-domains' '#sound-dai-cells', 'num-serializer' and 'port' which were not there in the txt file. Adds 'dmas' and 'dma-names' in the example which were not there in the txt file. Changes 'interrupts' and 'interrupt-names' from optional to required properties. Signed-off-by: Jayesh Choudhary <j-choudhary(a)ti.com> --- Changelog: v2: - changes the commit message - modifies the properties 'clocks', 'clock-names', 'dma-names', 'dmas', 'interrupts' and 'interrupt-names' according to the arm SOCs - adds 'port' and 'num-serializer' as node properties. .../bindings/sound/davinci-mcasp-audio.txt | 86 --------- .../bindings/sound/davinci-mcasp-audio.yaml | 179 ++++++++++++++++++ 2 files changed, 179 insertions(+), 86 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt create mode 100644 Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml diff --git a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt deleted file mode 100644 index bd863bd69501..000000000000 --- a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt +++ /dev/null @@ -1,86 +0,0 @@ -Texas Instruments McASP controller - -Required properties: -- compatible : - "ti,dm646x-mcasp-audio" : for DM646x platforms - "ti,da830-mcasp-audio" : for both DA830 & DA850 platforms - "ti,am33xx-mcasp-audio" : for AM33xx platforms (AM33xx, AM43xx, TI81xx) - "ti,dra7-mcasp-audio" : for DRA7xx platforms - "ti,omap4-mcasp-audio" : for OMAP4 - -- reg : Should contain reg specifiers for the entries in the reg-names property. -- reg-names : Should contain: - * "mpu" for the main registers (required). For compatibility with - existing software, it is recommended this is the first entry. - * "dat" for separate data port register access (optional). -- op-mode : I2S/DIT ops mode. 0 for I2S mode. 1 for DIT mode used for S/PDIF, - IEC60958-1, and AES-3 formats. -- tdm-slots : Slots for TDM operation. Indicates number of channels transmitted - or received over one serializer. -- serial-dir : A list of serializer configuration. Each entry is a number - indication for serializer pin direction. - (0 - INACTIVE, 1 - TX, 2 - RX) -- dmas: two element list of DMA controller phandles and DMA request line - ordered pairs. -- dma-names: identifier string for each DMA request line in the dmas property. - These strings correspond 1:1 with the ordered pairs in dmas. The dma - identifiers must be "rx" and "tx". - -Optional properties: - -- ti,hwmods : Must be "mcasp<n>", n is controller instance starting 0 -- tx-num-evt : FIFO levels. -- rx-num-evt : FIFO levels. -- dismod : Specify the drive on TX pin during inactive slots - 0 : 3-state - 2 : logic low - 3 : logic high - Defaults to 'logic low' when the property is not present -- sram-size-playback : size of sram to be allocated during playback -- sram-size-capture : size of sram to be allocated during capture -- interrupts : Interrupt numbers for McASP -- interrupt-names : Known interrupt names are "tx" and "rx" -- pinctrl-0: Should specify pin control group used for this controller. -- pinctrl-names: Should contain only one value - "default", for more details - please refer to pinctrl-bindings.txt -- fck_parent : Should contain a valid clock name which will be used as parent - for the McASP fck -- auxclk-fs-ratio: When McASP is bus master indicates the ratio between AUCLK - and FS rate if applicable: - AUCLK rate = auxclk-fs-ratio * FS rate - -Optional GPIO support: -If any McASP pin need to be used as GPIO then the McASP node must have: -... - gpio-controller - #gpio-cells = <2>; -... - -When requesting a GPIO, the first parameter is the PIN index in McASP_P* -registers. -For example to request the AXR2 pin of mcasp8: -function-gpios = <&mcasp8 2 0>; - -Or to request the ACLKR pin of mcasp8: -function-gpios = <&mcasp8 29 0>; - -For generic gpio information, please refer to bindings/gpio/gpio.txt - -Example: - -mcasp0: mcasp0@1d00000 { - compatible = "ti,da830-mcasp-audio"; - reg = <0x100000 0x3000>; - reg-names "mpu"; - interrupts = <82>, <83>; - interrupt-names = "tx", "rx"; - op-mode = <0>; /* MCASP_IIS_MODE */ - tdm-slots = <2>; - serial-dir = < - 0 0 0 0 /* 0: INACTIVE, 1: TX, 2: RX */ - 0 0 0 0 - 0 0 0 1 - 2 0 0 0 >; - tx-num-evt = <1>; - rx-num-evt = <1>; -}; diff --git a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml new file mode 100644 index 000000000000..2f8b2aca8c34 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml @@ -0,0 +1,179 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/davinci-mcasp-audio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: McASP Controller for TI SoCs + +maintainers: + - Jayesh Choudhary <j-choudhary(a)ti.com> + +properties: + compatible: + enum: + - ti,dm646x-mcasp-audio + - ti,da830-mcasp-audio + - ti,am33xx-mcasp-audio + - ti,dra7-mcasp-audio + - ti,omap4-mcasp-audio + + reg: + minItems: 1 + items: + - description: main registers + - description: data port register + + reg-names: + minItems: 1 + items: + - const: mpu + - const: dat + + op-mode: + description: I2S - 0 or DIT - 1 mode + enum: + - 0 + - 1 + + tdm-slots: + maxItems: 1 + + serial-dir: + description: + A list of serializer configuration + Entry is indication for serializer pin direction + 0 - Inactive, 1 - TX, 2 - RX + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 16 + items: + minimum: 0 + maximum: 2 + default: 0 + + dmas: + minItems: 1 + items: + - description: transmission DMA channel + - description: reception DMA channel + + dma-names: + minItems: 1 + items: + - const: tx + - const: rx + + ti,hwmods: + $ref: /schemas/types.yaml#/definitions/string + description: Name of hwmod associated with McASP + maxItems: 1 + deprecated: true + + tx-num-evt: + maxItems: 1 + + rx-num-evt: + maxItems: 1 + + dismod: + enum: + - 0 + - 2 + - 3 + default: 2 + + sram-size-playback: + maxItems: 1 + + sram-size-capture: + maxItems: 1 + + interrupts: + minItems: 1 + items: + - description: TX FIFO interrupt + - description: RX FIFO interrupt + + interrupt-names: + oneOf: + - minItems: 1 + items: + - const: tx + - const: rx + - const: common + + fck_parent: + description: parent clock for McASP fck + maxItems: 1 + + auxclk-fs-ratio: + description: ratio of AUCLK and FS if applicable + maxItems: 1 + + gpio-controller: true + + "#gpio-cells": + const: 2 + + function-gpios: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 3 + + clock-names: + minItems: 1 + maxItems: 3 + items: + - const: fck + - const: ahclkx + - const: ahclkr + + power-domains: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + + num-serializer: + maxItems: 1 + + port: + type: object + +required: + - compatible + - reg + - reg-names + - dmas + - dma-names + - interrupts + - interrupt-names + - serial-dir + - op-mode + - tdm-slots + +additionalProperties: false + +examples: + - | + mcasp0: mcasp0@1d00000 { + compatible = "ti,da830-mcasp-audio"; + reg = <0x100000 0x3000>; + reg-names = "mpu"; + interrupts = <82>, <83>; + interrupt-names = "tx", "rx"; + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>; + dma-names = "tx", "rx"; + serial-dir = < + 0 0 0 0 /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 0 0 + 0 0 0 1 + 2 0 0 0 >; + tx-num-evt = <1>; + rx-num-evt = <1>; + }; -- 2.17.1

2 2

[PATCH 0/5] xen: cleanup detection of non-essential pv devices
by Juergen Gross 25 Nov '21

25 Nov '21

Today the non-essential pv devices are hard coded in the xenbus driver and this list is lacking multiple entries. This series reworks the detection logic of non-essential devices by adding a flag for that purpose to struct xenbus_driver. Juergen Gross (5): xen: add "not_essential" flag to struct xenbus_driver xen: flag xen_drm_front to be not essential for system boot xen: flag hvc_xen to be not essential for system boot xen: flag pvcalls-front to be not essential for system boot xen: flag xen_snd_front to be not essential for system boot drivers/gpu/drm/xen/xen_drm_front.c | 1 + drivers/input/misc/xen-kbdfront.c | 1 + drivers/tty/hvc/hvc_xen.c | 1 + drivers/video/fbdev/xen-fbfront.c | 1 + drivers/xen/pvcalls-front.c | 1 + drivers/xen/xenbus/xenbus_probe_frontend.c | 14 +++----------- include/xen/xenbus.h | 1 + sound/xen/xen_snd_front.c | 1 + 8 files changed, 10 insertions(+), 11 deletions(-) -- 2.26.2

5 8

[GIT PULL] ASoC fixes for v5.16-rc3
by Mark Brown 25 Nov '21

25 Nov '21

The following changes since commit 424fe7edbed18d47f7b97f7e1322a6f8969b77ae: ASoC: stm32: i2s: fix 32 bits channel length without mclk (2021-11-17 13:04:38 +0000) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git tags/asoc-fix-v5.16-rc3 for you to fetch changes up to 86f74ba3fef56dd1cee19b7a15ae27fc0da5bb61: ASoC: SOF: hda: reset DAI widget before reconfiguring it (2021-11-24 12:57:11 +0000) ---------------------------------------------------------------- ASoC: Fixes for v5.16 There's a large but repetitive set of fixes here for issues with the Tegra kcontrols not correctly reporting changes to userspace, a fix for some issues with matching on older x86 platforms introduced during the merge window together with a set of smaller fixes and one new system quirk. ---------------------------------------------------------------- Hans de Goede (1): ASoC: soc-acpi: Set mach->id field on comp_ids matches Lucas Tanure (1): ASoC: cs35l41: Set the max SPI speed for the whole device Nicolas Frattaroli (1): ASoC: rk817: Add module alias for rk817-codec Pierre-Louis Bossart (1): ASoC: Intel: soc-acpi: add entry for ESSX8336 on CML Ranjani Sridharan (1): ASoC: SOF: hda: reset DAI widget before reconfiguring it Sameer Pujar (16): ASoC: tegra: Fix wrong value type in ADMAIF ASoC: tegra: Fix wrong value type in I2S ASoC: tegra: Fix wrong value type in DMIC ASoC: tegra: Fix wrong value type in DSPK ASoC: tegra: Fix wrong value type in SFC ASoC: tegra: Fix wrong value type in MVC ASoC: tegra: Fix kcontrol put callback in ADMAIF ASoC: tegra: Fix kcontrol put callback in I2S ASoC: tegra: Fix kcontrol put callback in DMIC ASoC: tegra: Fix kcontrol put callback in DSPK ASoC: tegra: Fix kcontrol put callback in AHUB ASoC: tegra: Fix kcontrol put callback in MVC ASoC: tegra: Fix kcontrol put callback in SFC ASoC: tegra: Fix kcontrol put callback in AMX ASoC: tegra: Fix kcontrol put callback in ADX ASoC: tegra: Fix kcontrol put callback in Mixer include/sound/soc-acpi.h | 2 +- sound/soc/codecs/cs35l41-spi.c | 32 +-- sound/soc/codecs/cs35l41.c | 7 - sound/soc/codecs/cs35l41.h | 4 +- sound/soc/codecs/rk817_codec.c | 1 + sound/soc/intel/common/soc-acpi-intel-cml-match.c | 6 + sound/soc/soc-acpi.c | 4 +- sound/soc/sof/intel/hda.c | 7 + sound/soc/tegra/tegra186_dspk.c | 181 ++++++++++--- sound/soc/tegra/tegra210_admaif.c | 140 +++++++--- sound/soc/tegra/tegra210_adx.c | 3 + sound/soc/tegra/tegra210_ahub.c | 11 +- sound/soc/tegra/tegra210_amx.c | 3 + sound/soc/tegra/tegra210_dmic.c | 184 +++++++++++--- sound/soc/tegra/tegra210_i2s.c | 296 +++++++++++++++++----- sound/soc/tegra/tegra210_mixer.c | 26 +- sound/soc/tegra/tegra210_mvc.c | 30 ++- sound/soc/tegra/tegra210_sfc.c | 123 ++++++--- 18 files changed, 802 insertions(+), 258 deletions(-)

2 1

[PATCH 0/2] Kconfig symbol clean-up for sound
by Lukas Bulwahn 25 Nov '21

25 Nov '21

Dear sound maintainers, The script ./scripts/checkkconfigsymbols.py warns on invalid references to Kconfig symbols (often, minor typos, name confusions or outdated references). This is a patch series addressing the issues reported by ./scripts/checkkconfigsymbols.py in the ./sound/ directory for Kconfig files, quickly filtered down with: ./scripts/checkkconfigsymbols.py | grep "sound.*Kconfig" -B 1 This patch series addresses: SND_SOC_UNIPHIER_AIO_DMA Referencing files: sound/soc/uniphier/Kconfig SND_SOC_WCD937X Referencing files: sound/soc/codecs/Kconfig This patch series does not address: CLK_FIXED_FCH Referencing files: sound/soc/amd/Kconfig, sound/soc/amd/acp/Kconfig Rationale: config definition has been submitted, but is still pending for inclusion through another tree. SND_SOC_AC97_BUS_NEW Referencing files: sound/soc/pxa/Kconfig Rationale: waiting for response; the kernel developer has been informed here: https://lore.kernel.org/all/CAKXUXMzqgyNGEnxAMQqZiXJYSK-X8uB-nxHWwPg41H6yS0… Both patches in this series can be discussed and applied individually. They are sent in one patch series, as they orginate from the investigation guided by the same tool and hence share similar topics and resolutions. Please pick this series of minor clean-up patches. It applies cleanly on next-20211124. Best regards, Lukas Lukas Bulwahn (2): ASoC: uniphier: drop selecting non-existing SND_SOC_UNIPHIER_AIO_DMA ASoC: codecs: wcd938x: add SND_SOC_WCD938_SDW to codec list instead sound/soc/codecs/Kconfig | 3 +-- sound/soc/uniphier/Kconfig | 2 -- 2 files changed, 1 insertion(+), 4 deletions(-) -- 2.26.2

2 3

[PATCH -next] ASoC: SOF: mediatek: Add missing of_node_put() in platform_parse_resource()
by Yang Yingliang 25 Nov '21

25 Nov '21

The node pointer is returned by of_parse_phandle() with refcount incremented in platform_parse_resource(). Calling of_node_put() to aovid the refcount leak. Reported-by: Hulk Robot <hulkci(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- sound/soc/sof/mediatek/mt8195/mt8195.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/sof/mediatek/mt8195/mt8195.c b/sound/soc/sof/mediatek/mt8195/mt8195.c index 40e5a25875a6..55d9812870a4 100644 --- a/sound/soc/sof/mediatek/mt8195/mt8195.c +++ b/sound/soc/sof/mediatek/mt8195/mt8195.c @@ -43,6 +43,7 @@ static int platform_parse_resource(struct platform_device *pdev, void *data) } ret = of_address_to_resource(mem_region, 0, &res); + of_node_put(mem_region); if (ret) { dev_err(dev, "of_address_to_resource dma failed\n"); return ret; @@ -64,6 +65,7 @@ static int platform_parse_resource(struct platform_device *pdev, void *data) } ret = of_address_to_resource(mem_region, 0, &res); + of_node_put(mem_region); if (ret) { dev_err(dev, "of_address_to_resource sysmem failed\n"); return ret; -- 2.25.1

2 1

[PATCH 1/2] ASoC: rt5640: Add the binding include file for the HDA header support
by Oder Chiou 25 Nov '21

25 Nov '21

The patch adds the binding include file for the HDA header support. Signed-off-by: Oder Chiou <oder_chiou(a)realtek.com> --- include/dt-bindings/sound/rt5640.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/dt-bindings/sound/rt5640.h b/include/dt-bindings/sound/rt5640.h index 154c9b4414f2..655f6946388a 100644 --- a/include/dt-bindings/sound/rt5640.h +++ b/include/dt-bindings/sound/rt5640.h @@ -16,6 +16,7 @@ #define RT5640_JD_SRC_GPIO2 4 #define RT5640_JD_SRC_GPIO3 5 #define RT5640_JD_SRC_GPIO4 6 +#define RT5640_JD_SRC_HDA_HEADER 7 #define RT5640_OVCD_SF_0P5 0 #define RT5640_OVCD_SF_0P75 1 -- 2.33.1

2 2

[PATCH] ASoC: mediatek: remove unnecessary CONFIG_PM
by Jiaxin Yu 25 Nov '21

25 Nov '21

The unnecessary conditional inclusion caused the following warning. Such as: >> sound/soc/mediatek/mt8192/mt8192-afe-pcm.c:2368:32: warning: unused >> variable 'mt8192_afe_pm_ops' [-Wunused-const-variable] static const struct dev_pm_ops mt8192_afe_pm_ops = { Because runtime_pm already handles the case without CONFIG_PM, we can remove CONFIG_PM condition. Signed-off-by: Jiaxin Yu <jiaxin.yu(a)mediatek.com> Reported-by: kernel test robot <lkp(a)intel.com> --- sound/soc/mediatek/mt2701/mt2701-afe-pcm.c | 2 -- sound/soc/mediatek/mt6797/mt6797-afe-pcm.c | 2 -- sound/soc/mediatek/mt8173/mt8173-max98090.c | 2 -- sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c | 2 -- sound/soc/mediatek/mt8173/mt8173-rt5650-rt5676.c | 2 -- sound/soc/mediatek/mt8173/mt8173-rt5650.c | 2 -- sound/soc/mediatek/mt8183/mt8183-afe-pcm.c | 2 -- sound/soc/mediatek/mt8192/mt8192-afe-pcm.c | 2 -- 8 files changed, 16 deletions(-) diff --git a/sound/soc/mediatek/mt2701/mt2701-afe-pcm.c b/sound/soc/mediatek/mt2701/mt2701-afe-pcm.c index bc3d0466472b..0f178de92a0f 100644 --- a/sound/soc/mediatek/mt2701/mt2701-afe-pcm.c +++ b/sound/soc/mediatek/mt2701/mt2701-afe-pcm.c @@ -1474,9 +1474,7 @@ static struct platform_driver mt2701_afe_pcm_driver = { .driver = { .name = "mt2701-audio", .of_match_table = mt2701_afe_pcm_dt_match, -#ifdef CONFIG_PM .pm = &mt2701_afe_pm_ops, -#endif }, .probe = mt2701_afe_pcm_dev_probe, .remove = mt2701_afe_pcm_dev_remove, diff --git a/sound/soc/mediatek/mt6797/mt6797-afe-pcm.c b/sound/soc/mediatek/mt6797/mt6797-afe-pcm.c index 3d68e4726ea2..fb4abec9aa5f 100644 --- a/sound/soc/mediatek/mt6797/mt6797-afe-pcm.c +++ b/sound/soc/mediatek/mt6797/mt6797-afe-pcm.c @@ -901,9 +901,7 @@ static struct platform_driver mt6797_afe_pcm_driver = { .driver = { .name = "mt6797-audio", .of_match_table = mt6797_afe_pcm_dt_match, -#ifdef CONFIG_PM .pm = &mt6797_afe_pm_ops, -#endif }, .probe = mt6797_afe_pcm_dev_probe, .remove = mt6797_afe_pcm_dev_remove, diff --git a/sound/soc/mediatek/mt8173/mt8173-max98090.c b/sound/soc/mediatek/mt8173/mt8173-max98090.c index fc94314bfc02..2408c9d3d9b3 100644 --- a/sound/soc/mediatek/mt8173/mt8173-max98090.c +++ b/sound/soc/mediatek/mt8173/mt8173-max98090.c @@ -193,9 +193,7 @@ static struct platform_driver mt8173_max98090_driver = { .driver = { .name = "mt8173-max98090", .of_match_table = mt8173_max98090_dt_match, -#ifdef CONFIG_PM .pm = &snd_soc_pm_ops, -#endif }, .probe = mt8173_max98090_dev_probe, }; diff --git a/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c b/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c index 0f28dc2217c0..e6e824f3d24a 100644 --- a/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c +++ b/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c @@ -231,9 +231,7 @@ static struct platform_driver mt8173_rt5650_rt5514_driver = { .driver = { .name = "mtk-rt5650-rt5514", .of_match_table = mt8173_rt5650_rt5514_dt_match, -#ifdef CONFIG_PM .pm = &snd_soc_pm_ops, -#endif }, .probe = mt8173_rt5650_rt5514_dev_probe, }; diff --git a/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5676.c b/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5676.c index 077c6ee06780..ba6fe3d90bfc 100644 --- a/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5676.c +++ b/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5676.c @@ -298,9 +298,7 @@ static struct platform_driver mt8173_rt5650_rt5676_driver = { .driver = { .name = "mtk-rt5650-rt5676", .of_match_table = mt8173_rt5650_rt5676_dt_match, -#ifdef CONFIG_PM .pm = &snd_soc_pm_ops, -#endif }, .probe = mt8173_rt5650_rt5676_dev_probe, }; diff --git a/sound/soc/mediatek/mt8173/mt8173-rt5650.c b/sound/soc/mediatek/mt8173/mt8173-rt5650.c index 2cbf679f5c74..9b933cce0b20 100644 --- a/sound/soc/mediatek/mt8173/mt8173-rt5650.c +++ b/sound/soc/mediatek/mt8173/mt8173-rt5650.c @@ -336,9 +336,7 @@ static struct platform_driver mt8173_rt5650_driver = { .driver = { .name = "mtk-rt5650", .of_match_table = mt8173_rt5650_dt_match, -#ifdef CONFIG_PM .pm = &snd_soc_pm_ops, -#endif }, .probe = mt8173_rt5650_dev_probe, }; diff --git a/sound/soc/mediatek/mt8183/mt8183-afe-pcm.c b/sound/soc/mediatek/mt8183/mt8183-afe-pcm.c index 14e77df06b01..86c8a523fe9e 100644 --- a/sound/soc/mediatek/mt8183/mt8183-afe-pcm.c +++ b/sound/soc/mediatek/mt8183/mt8183-afe-pcm.c @@ -1279,9 +1279,7 @@ static struct platform_driver mt8183_afe_pcm_driver = { .driver = { .name = "mt8183-audio", .of_match_table = mt8183_afe_pcm_dt_match, -#ifdef CONFIG_PM .pm = &mt8183_afe_pm_ops, -#endif }, .probe = mt8183_afe_pcm_dev_probe, .remove = mt8183_afe_pcm_dev_remove, diff --git a/sound/soc/mediatek/mt8192/mt8192-afe-pcm.c b/sound/soc/mediatek/mt8192/mt8192-afe-pcm.c index 31c280339c50..e1e4ca931551 100644 --- a/sound/soc/mediatek/mt8192/mt8192-afe-pcm.c +++ b/sound/soc/mediatek/mt8192/mt8192-afe-pcm.c @@ -2381,9 +2381,7 @@ static struct platform_driver mt8192_afe_pcm_driver = { .driver = { .name = "mt8192-audio", .of_match_table = mt8192_afe_pcm_dt_match, -#ifdef CONFIG_PM .pm = &mt8192_afe_pm_ops, -#endif }, .probe = mt8192_afe_pcm_dev_probe, .remove = mt8192_afe_pcm_dev_remove, -- 2.25.1

3 2

[PATCH] ASoC: dt-bindings: wlf, wm8962: add missing interrupt property
by David Heidelberg 25 Nov '21

25 Nov '21

Both, hardware and drivers does support interrupts. Fix warnings as: arch/arm/boot/dts/tegra30-microsoft-surface-rt-efi.dt.yaml: audio-codec@1a: 'interrupt-parent', 'interrupts' do not match any of the regexes: 'pinctrl-[0-9]+' From schema: /home/runner/work/linux/linux/Documentation/devicetree/bindings/sound/wlf,wm8962.yaml Fixes: cd51b942f344 ("ASoC: dt-bindings: wlf,wm8962: Convert to json-schema") Signed-off-by: David Heidelberg <david(a)ixit.cz> --- Documentation/devicetree/bindings/sound/wlf,wm8962.yaml | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8962.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8962.yaml index 0e6249d7c133..5e172e9462b9 100644 --- a/Documentation/devicetree/bindings/sound/wlf,wm8962.yaml +++ b/Documentation/devicetree/bindings/sound/wlf,wm8962.yaml @@ -19,6 +19,9 @@ properties: clocks: maxItems: 1 + interrupts: + maxItems: 1 + "#sound-dai-cells": const: 0 -- 2.33.0

4 3

[PATCH] ASoC: dt-bindings: davinci-mcasp: convert McASP bindings to yaml schema
by Jayesh Choudhary 25 Nov '21

25 Nov '21

Convert the bindings for McASP controllers for TI SOCs from txt to YAML schema. Adds additional properties 'clocks', 'clock-names', 'power-domains' and '#sound-dai-cells' which were not there in txt file. Adds 'dmas' and 'dma-names' in the example which were not there in txt file. Changes 'interrupts' and 'interrupt-names' from optional to required properties. Signed-off-by: Jayesh Choudhary <j-choudhary(a)ti.com> --- .../bindings/sound/davinci-mcasp-audio.txt | 86 ---------- .../bindings/sound/davinci-mcasp-audio.yaml | 161 ++++++++++++++++++ 2 files changed, 161 insertions(+), 86 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt create mode 100644 Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml diff --git a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt deleted file mode 100644 index bd863bd69501..000000000000 --- a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt +++ /dev/null @@ -1,86 +0,0 @@ -Texas Instruments McASP controller - -Required properties: -- compatible : - "ti,dm646x-mcasp-audio" : for DM646x platforms - "ti,da830-mcasp-audio" : for both DA830 & DA850 platforms - "ti,am33xx-mcasp-audio" : for AM33xx platforms (AM33xx, AM43xx, TI81xx) - "ti,dra7-mcasp-audio" : for DRA7xx platforms - "ti,omap4-mcasp-audio" : for OMAP4 - -- reg : Should contain reg specifiers for the entries in the reg-names property. -- reg-names : Should contain: - * "mpu" for the main registers (required). For compatibility with - existing software, it is recommended this is the first entry. - * "dat" for separate data port register access (optional). -- op-mode : I2S/DIT ops mode. 0 for I2S mode. 1 for DIT mode used for S/PDIF, - IEC60958-1, and AES-3 formats. -- tdm-slots : Slots for TDM operation. Indicates number of channels transmitted - or received over one serializer. -- serial-dir : A list of serializer configuration. Each entry is a number - indication for serializer pin direction. - (0 - INACTIVE, 1 - TX, 2 - RX) -- dmas: two element list of DMA controller phandles and DMA request line - ordered pairs. -- dma-names: identifier string for each DMA request line in the dmas property. - These strings correspond 1:1 with the ordered pairs in dmas. The dma - identifiers must be "rx" and "tx". - -Optional properties: - -- ti,hwmods : Must be "mcasp<n>", n is controller instance starting 0 -- tx-num-evt : FIFO levels. -- rx-num-evt : FIFO levels. -- dismod : Specify the drive on TX pin during inactive slots - 0 : 3-state - 2 : logic low - 3 : logic high - Defaults to 'logic low' when the property is not present -- sram-size-playback : size of sram to be allocated during playback -- sram-size-capture : size of sram to be allocated during capture -- interrupts : Interrupt numbers for McASP -- interrupt-names : Known interrupt names are "tx" and "rx" -- pinctrl-0: Should specify pin control group used for this controller. -- pinctrl-names: Should contain only one value - "default", for more details - please refer to pinctrl-bindings.txt -- fck_parent : Should contain a valid clock name which will be used as parent - for the McASP fck -- auxclk-fs-ratio: When McASP is bus master indicates the ratio between AUCLK - and FS rate if applicable: - AUCLK rate = auxclk-fs-ratio * FS rate - -Optional GPIO support: -If any McASP pin need to be used as GPIO then the McASP node must have: -... - gpio-controller - #gpio-cells = <2>; -... - -When requesting a GPIO, the first parameter is the PIN index in McASP_P* -registers. -For example to request the AXR2 pin of mcasp8: -function-gpios = <&mcasp8 2 0>; - -Or to request the ACLKR pin of mcasp8: -function-gpios = <&mcasp8 29 0>; - -For generic gpio information, please refer to bindings/gpio/gpio.txt - -Example: - -mcasp0: mcasp0@1d00000 { - compatible = "ti,da830-mcasp-audio"; - reg = <0x100000 0x3000>; - reg-names "mpu"; - interrupts = <82>, <83>; - interrupt-names = "tx", "rx"; - op-mode = <0>; /* MCASP_IIS_MODE */ - tdm-slots = <2>; - serial-dir = < - 0 0 0 0 /* 0: INACTIVE, 1: TX, 2: RX */ - 0 0 0 0 - 0 0 0 1 - 2 0 0 0 >; - tx-num-evt = <1>; - rx-num-evt = <1>; -}; diff --git a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml new file mode 100644 index 000000000000..ce1bd02decd3 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml @@ -0,0 +1,161 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/davinci-mcasp-audio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: McASP Controller for TI SoCs + +maintainers: + - Jayesh Choudhary <j-choudhary(a)ti.com> + +properties: + compatible: + enum: + - ti,dm646x-mcasp-audio + - ti,da830-mcasp-audio + - ti,am33xx-mcasp-audio + - ti,dra7-mcasp-audio + - ti,omap4-mcasp-audio + + reg: + minItems: 1 + items: + - description: main registers + - description: data port register + + reg-names: + minItems: 1 + items: + - const: mpu + - const: dat + + op-mode: + description: I2S - 0 or DIT - 1 mode + enum: + - 0 + - 1 + + tdm-slots: + maxItems: 1 + + serial-dir: + description: + A list of serializer configuration + Entry is indication for serializer pin direction + 0 - Inactive, 1 - TX, 2 - RX + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 16 + items: + minimum: 0 + maximum: 2 + default: 0 + + dmas: + items: + - description: transmission DMA channel + - description: reception DMA channel + + dma-names: + items: + - const: tx + - const: rx + + ti,hwmods: + $ref: /schemas/types.yaml#/definitions/string + description: Name of hwmod associated with McASP + maxItems: 1 + deprecated: true + + tx-num-evt: + maxItems: 1 + + rx-num-evt: + maxItems: 1 + + dismod: + enum: + - 0 + - 2 + - 3 + default: 2 + + sram-size-playback: + maxItems: 1 + + sram-size-capture: + maxItems: 1 + + interrupts: + items: + - description: TX FIFO interrupt + - description: RX FIFO interrupt + + interrupt-names: + items: + - const: tx + - const: rx + + fck_parent: + description: parent clock for McASP fck + maxItems: 1 + + auxclk-fs-ratio: + description: ratio of AUCLK and FS if applicable + maxItems: 1 + + gpio-controller: true + + "#gpio-cells": + const: 2 + + function-gpios: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: fck + + power-domains: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + +required: + - compatible + - reg + - reg-names + - dmas + - dma-names + - interrupts + - interrupt-names + - serial-dir + - op-mode + - tdm-slots + +additionalProperties: false + +examples: + - | + mcasp0: mcasp0@1d00000 { + compatible = "ti,da830-mcasp-audio"; + reg = <0x100000 0x3000>; + reg-names = "mpu"; + interrupts = <82>, <83>; + interrupt-names = "tx", "rx"; + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>; + dma-names = "tx", "rx"; + serial-dir = < + 0 0 0 0 /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 0 0 + 0 0 0 1 + 2 0 0 0 >; + tx-num-evt = <1>; + rx-num-evt = <1>; + }; -- 2.17.1

3 3