October 2021 - Alsa-devel - mailman.alsa-project.org

[PATCH v2 0/4] ALSA: hda: New NHLT functions and cleanup
by Cezary Rojewski 19 Oct '21

19 Oct '21

Changes add two crucial functions: endpoint presence-check and retrieval of endpoint's BLOB (hardware configuration) to NHLT API. Few cleanups accompany the above: Work is done to align NHLT-struct naming with other, commonly used ACPI-structs. While cleaning up, don't forget about "is DMIC in NHLT?" check. No need to check for channel count or anything DMIC-configuration related, just straight up verify link_type presence. Changes in v2: - patch "ALSA hda: Drop device-argument in NHLT functions" has been dropped - updated newly added declarations in intel-nhlt.h so warning: "no-previous-prototype-for-function" and error: "use-of-undeclared-identifier" are no longer observed when CONFIG_SND_INTEL_NHLT is not enabled - added Mark's tag to the last patch of the series Amadeusz Sławiński (4): ALSA: hda: Follow ACPI convention in NHLT struct naming ALSA: hda: Fill gaps in NHLT endpoint-interface ALSA: hda: Simplify DMIC-in-NHLT check ASoC: Intel: Skylake: Use NHLT API to search for blob include/sound/intel-nhlt.h | 53 ++++++++---- sound/hda/intel-dsp-config.c | 4 +- sound/hda/intel-nhlt.c | 110 ++++++++++++++++++++++++- sound/soc/intel/skylake/skl-nhlt.c | 108 +----------------------- sound/soc/intel/skylake/skl-pcm.c | 3 + sound/soc/intel/skylake/skl-topology.c | 29 ++++--- sound/soc/intel/skylake/skl-topology.h | 1 + sound/soc/intel/skylake/skl.h | 6 +- sound/soc/sof/intel/hda.c | 2 +- 9 files changed, 171 insertions(+), 145 deletions(-) -- 2.25.1

3 6

[PATCH v3 0/4] ASoC: SOF: Intel: power optimizations with HDaudio SPIB register
by Pierre-Louis Bossart 18 Oct '21

18 Oct '21

This patchset was initially provided in a larger series that was split in two [1]. This part only provides support for the SPIB register support, added on Intel platforms since Skylake (2015). The use of the SPIB register helps reduce power consumption - though to a smaller degree than DMI_L1. This hardware capability is however incompatible with userspace-initiated rewinds typically used by PulseAudio. In the past (2015..2017) Intel suggested an API extension to let applications disable rewinds. At the time the feedback was that such a capability was too Intel-specific and SPIB remained unused except for loading DSP code. We now see devices with smaller batteries being released, and it's time to revisit Linux support for SPIB to extend battery life. In this update the rewinds are disabled via an opt-in kernel parameter. In the previous reviews, there was consensus that a Kconfig option was too complicated for distributions to set, and we are missing a TBD API to expose such capabilities to user-space. The debate on whether or not to use rewinds, and the impact of disabling rewinds, will likely be closed when Intel releases the 'deep-buffer' support, currently under development [2][3]. With this solution, rewinds will not be needed, ever. When an application deals with content that is not latency-sensitive (e.g. music playback), it will be able to reduce power consumption by selecting a different PCM device with increased buffering capabilities. Low-latency streams will be handled by the 'regular' path. In other words, the impossible compromise between power and latency will be handled with different PCM devices/profiles for the same endpoint, and we can push the design of capability negotiation to a later time when all the building blocks (firmware topology, kernel, userspace) are ready - we still have firmware xruns, DPCM race conditions to solve, and a need to describe these alternate PCM devices with UCM using 'modifiers'. [1] https://lore.kernel.org/alsa-devel/20210610205326.1176400-1-pierre-louis.bo… [2] https://github.com/thesofproject/linux/pull/3146 [3] https://github.com/thesofproject/sof/pull/4611 Changes since v2: Added check on appl_ptr (Takashi) Moved rewind detection to deal with SYNC_PTR (Takashi) Pierre-Louis Bossart (2): ALSA: pcm: unconditionally check if appl_ptr is in 0..boundary range ALSA: pcm: introduce INFO_NO_REWINDS flag Ranjani Sridharan (2): ASOC: SOF: pcm: add .ack callback support ASoC: SOF: Intel: add .ack support for HDaudio platforms include/uapi/sound/asound.h | 2 +- sound/core/pcm_lib.c | 17 +++++++++++++ sound/soc/sof/intel/apl.c | 1 + sound/soc/sof/intel/cnl.c | 1 + sound/soc/sof/intel/hda-pcm.c | 41 ++++++++++++++++++++++++++++++-- sound/soc/sof/intel/hda-stream.c | 2 ++ sound/soc/sof/intel/hda.h | 1 + sound/soc/sof/intel/tgl.c | 1 + sound/soc/sof/ops.h | 10 ++++++++ sound/soc/sof/pcm.c | 9 +++++++ sound/soc/sof/sof-priv.h | 3 +++ 11 files changed, 85 insertions(+), 3 deletions(-) -- 2.25.1

2 12

[PATCH] ASoC: Intel: sof_sdw: Initialize the sof_sdw_quirk with RT711_JD_NULL
by Chris Chiu 18 Oct '21

18 Oct '21

The jd_src of RT711 which is initialized in rt711/rt711_sdca_init will be overridden by rt711/rt711_sdca_add_codec_device_props when the sof_sdw_quirk is not RT711_JD_NULL. It will force the JD mode to RT711_JD1 and cause confusion while debugging the JD mode of the boards without quirk. Initialize sof_sdw_quirk with RT711_JD_NULL to honor the jd_src value in rt711/rt711_sdca init. Signed-off-by: Chris Chiu <chris.chiu(a)canonical.com> --- sound/soc/intel/boards/sof_sdw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/intel/boards/sof_sdw.c b/sound/soc/intel/boards/sof_sdw.c index 6b06248a9327..d05c0565e09c 100644 --- a/sound/soc/intel/boards/sof_sdw.c +++ b/sound/soc/intel/boards/sof_sdw.c @@ -15,7 +15,7 @@ #include "sof_sdw_common.h" #include "../../codecs/rt711.h" -unsigned long sof_sdw_quirk = RT711_JD1; +unsigned long sof_sdw_quirk = RT711_JD_NULL; static int quirk_override = -1; module_param_named(quirk, quirk_override, int, 0444); MODULE_PARM_DESC(quirk, "Board-specific quirk override"); -- 2.20.1

2 3

[PATCH] ALSA: uapi: Fix a C++ style comment in asound.h
by Takashi Iwai 18 Oct '21

18 Oct '21

UAPI header should have no C++ style comment but only in the traditional C style comment, but there is still one place we used it mistakenly. This patch corrects it. Fixes: 542283566679 ("ALSA: ctl: remove unused macro for timestamping of elem_value") Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- include/uapi/sound/asound.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/uapi/sound/asound.h b/include/uapi/sound/asound.h index 5859ca0a1439..5fbb79e30819 100644 --- a/include/uapi/sound/asound.h +++ b/include/uapi/sound/asound.h @@ -1002,7 +1002,7 @@ typedef int __bitwise snd_ctl_elem_iface_t; #define SNDRV_CTL_ELEM_ACCESS_WRITE (1<<1) #define SNDRV_CTL_ELEM_ACCESS_READWRITE (SNDRV_CTL_ELEM_ACCESS_READ|SNDRV_CTL_ELEM_ACCESS_WRITE) #define SNDRV_CTL_ELEM_ACCESS_VOLATILE (1<<2) /* control value may be changed without a notification */ -// (1 << 3) is unused. +/* (1 << 3) is unused. */ #define SNDRV_CTL_ELEM_ACCESS_TLV_READ (1<<4) /* TLV read is possible */ #define SNDRV_CTL_ELEM_ACCESS_TLV_WRITE (1<<5) /* TLV write is possible */ #define SNDRV_CTL_ELEM_ACCESS_TLV_READWRITE (SNDRV_CTL_ELEM_ACCESS_TLV_READ|SNDRV_CTL_ELEM_ACCESS_TLV_WRITE) -- 2.26.2

2 1

[PATCH 0/5] ALSA: hda: New NHLT functions and cleanup
by Cezary Rojewski 18 Oct '21

18 Oct '21

Changes add two crucial functions: endpoint presence-check and retrieval of endpoint's BLOB (hardware configuration) to NHLT API. Few cleanups accompany the above: First, drop device pointer usage in NHLT interface as those function don't really make use of it. Work is done to align NHLT-struct naming with other, commonly used ACPI-structs. While cleaning up, don't forget about "is DMIC in NHLT?" check. No need to check for channel count or anything DMIC-configuration related, just straight up verify link_type presence. Amadeusz Sławiński (5): ALSA: hda: Drop device-argument in NHLT functions ALSA: hda: Follow ACPI convention in NHLT struct naming ALSA: hda: Fill gaps in NHLT endpoint-interface ALSA: hda: Simplify DMIC-in-NHLT check ASoC: Intel: Skylake: Use NHLT API to search for blob include/sound/intel-nhlt.h | 37 +++++-- sound/hda/intel-dsp-config.c | 6 +- sound/hda/intel-nhlt.c | 127 ++++++++++++++++++++++--- sound/soc/intel/skylake/skl-nhlt.c | 108 +-------------------- sound/soc/intel/skylake/skl-pcm.c | 3 + sound/soc/intel/skylake/skl-topology.c | 27 +++--- sound/soc/intel/skylake/skl-topology.h | 1 + sound/soc/intel/skylake/skl.c | 5 +- sound/soc/intel/skylake/skl.h | 6 +- sound/soc/sof/intel/hda.c | 6 +- 10 files changed, 173 insertions(+), 153 deletions(-) -- 2.25.1

5 15

[PATCH] ALSA: firewire: Fix C++ style comments in uapi header
by Takashi Iwai 18 Oct '21

18 Oct '21

UAPI headers are built with -std=c90 and C++ style comments are explicitly prohibited. The recent commit overlooked the rule and caused the error at header installation. This patch corrects those. Fixes: bea36afa102e ("ALSA: firewire-motu: add message parser to gather meter information in register DSP model") Fixes: 90b28f3bb85c ("ALSA: firewire-motu: add message parser for meter information in command DSP model") Fixes: 634ec0b2906e ("ALSA: firewire-motu: notify event for parameter change in register DSP model") Reported-by: Stephen Rothwell <sfr(a)canb.auug.org.au> Link: https://lore.kernel.org/r/20211018113812.0a16efb0@canb.auug.org.au Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- include/uapi/sound/firewire.h | 70 ++++++++++++++++++----------------- 1 file changed, 37 insertions(+), 33 deletions(-) diff --git a/include/uapi/sound/firewire.h b/include/uapi/sound/firewire.h index 76190a0cb069..e52a97b3ceaa 100644 --- a/include/uapi/sound/firewire.h +++ b/include/uapi/sound/firewire.h @@ -68,8 +68,8 @@ struct snd_firewire_event_tascam_control { struct snd_firewire_event_motu_register_dsp_change { unsigned int type; - __u32 count; // The number of changes. - __u32 changes[]; // Encoded event for change of register DSP. + __u32 count; /* The number of changes. */ + __u32 changes[]; /* Encoded event for change of register DSP. */ }; union snd_firewire_event { @@ -119,25 +119,27 @@ struct snd_firewire_tascam_state { __be32 data[SNDRV_FIREWIRE_TASCAM_STATE_COUNT]; }; -// In below MOTU models, software is allowed to control their DSP by accessing to registers. -// - 828mk2 -// - 896hd -// - Traveler -// - 8 pre -// - Ultralite -// - 4 pre -// - Audio Express -// -// On the other hand, the status of DSP is split into specific messages included in the sequence of -// isochronous packet. ALSA firewire-motu driver gathers the messages and allow userspace applications -// to read it via ioctl. In 828mk2, 896hd, and Traveler, hardware meter for all of physical inputs -// are put into the message, while one pair of physical outputs is selected. The selection is done by -// LSB one byte in asynchronous write quadlet transaction to 0x'ffff'f000'0b2c. -// -// I note that V3HD/V4HD uses asynchronous transaction for the purpose. The destination address is -// registered to 0x'ffff'f000'0b38 and '0b3c by asynchronous write quadlet request. The size of -// message differs between 23 and 51 quadlets. For the case, the number of mixer bus can be extended -// up to 12. +/* + * In below MOTU models, software is allowed to control their DSP by accessing to registers. + * - 828mk2 + * - 896hd + * - Traveler + * - 8 pre + * - Ultralite + * - 4 pre + * - Audio Express + * + * On the other hand, the status of DSP is split into specific messages included in the sequence of + * isochronous packet. ALSA firewire-motu driver gathers the messages and allow userspace applications + * to read it via ioctl. In 828mk2, 896hd, and Traveler, hardware meter for all of physical inputs + * are put into the message, while one pair of physical outputs is selected. The selection is done by + * LSB one byte in asynchronous write quadlet transaction to 0x'ffff'f000'0b2c. + * + * I note that V3HD/V4HD uses asynchronous transaction for the purpose. The destination address is + * registered to 0x'ffff'f000'0b38 and '0b3c by asynchronous write quadlet request. The size of + * message differs between 23 and 51 quadlets. For the case, the number of mixer bus can be extended + * up to 12. + */ #define SNDRV_FIREWIRE_MOTU_REGISTER_DSP_METER_COUNT 40 @@ -219,18 +221,20 @@ struct snd_firewire_motu_register_dsp_parameter { __u8 reserved[64]; }; -// In below MOTU models, software is allowed to control their DSP by command in frame of -// asynchronous transaction to 0x'ffff'0001'0000: -// -// - 828 mk3 (FireWire only and Hybrid) -// - 896 mk3 (FireWire only and Hybrid) -// - Ultralite mk3 (FireWire only and Hybrid) -// - Traveler mk3 -// - Track 16 -// -// On the other hand, the states of hardware meter is split into specific messages included in the -// sequence of isochronous packet. ALSA firewire-motu driver gathers the message and allow userspace -// application to read it via ioctl. +/* + * In below MOTU models, software is allowed to control their DSP by command in frame of + * asynchronous transaction to 0x'ffff'0001'0000: + * + * - 828 mk3 (FireWire only and Hybrid) + * - 896 mk3 (FireWire only and Hybrid) + * - Ultralite mk3 (FireWire only and Hybrid) + * - Traveler mk3 + * - Track 16 + * + * On the other hand, the states of hardware meter is split into specific messages included in the + * sequence of isochronous packet. ALSA firewire-motu driver gathers the message and allow userspace + * application to read it via ioctl. + */ #define SNDRV_FIREWIRE_MOTU_COMMAND_DSP_METER_COUNT 400 -- 2.26.2

2 1

[PATCH v3] ASoC: dt-bindings: mediatek: mt8192: re-add audio afe document
by Tzung-Bi Shih 18 Oct '21

18 Oct '21

The document was merged as commit 1afc60e00de3 ("dt-bindings: mediatek: mt8192: add audio afe document"). However, [1] revealed that the commit 1afc60e00de3 breaks dt_binding_check due to dt-bindings/clock/mt8192-clk.h doesn't exist. As a temporary fix, commit 7d94ca3c8acd ("ASoC: mt8192: revert add audio afe document") reverted commit 1afc60e00de3. dt-bindings/clock/mt8192-clk.h is in mainline per commit f35f1a23e0e1 ("clk: mediatek: Add dt-bindings of MT8192 clocks"). Re-adds the document back. [1]: https://mailman.alsa-project.org/pipermail/alsa-devel/2020-November/176873.… Signed-off-by: Tzung-Bi Shih <tzungbi(a)google.com> --- Changes from v2 (https://mailman.alsa-project.org/pipermail/alsa-devel/2021-August/189058.ht…): - Simplify the commit message. Changes from v1 (https://mailman.alsa-project.org/pipermail/alsa-devel/2021-August/189048.ht…): - Add more context to the commit message. .../bindings/sound/mt8192-afe-pcm.yaml | 100 ++++++++++++++++++ 1 file changed, 100 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml diff --git a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml new file mode 100644 index 000000000000..0170c93802d2 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/mt8192-afe-pcm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek AFE PCM controller for mt8192 + +maintainers: + - Jiaxin Yu <jiaxin.yu(a)mediatek.com> + - Shane Chien <shane.chien(a)mediatek.com> + +properties: + compatible: + const: mediatek,mt8192-audio + + interrupts: + maxItems: 1 + + resets: + maxItems: 1 + + reset-names: + const: audiosys + + mediatek,apmixedsys: + $ref: "/schemas/types.yaml#/definitions/phandle" + description: The phandle of the mediatek apmixedsys controller + + mediatek,infracfg: + $ref: "/schemas/types.yaml#/definitions/phandle" + description: The phandle of the mediatek infracfg controller + + mediatek,topckgen: + $ref: "/schemas/types.yaml#/definitions/phandle" + description: The phandle of the mediatek topckgen controller + + power-domains: + maxItems: 1 + + clocks: + items: + - description: AFE clock + - description: ADDA DAC clock + - description: ADDA DAC pre-distortion clock + - description: audio infra sys clock + - description: audio infra 26M clock + + clock-names: + items: + - const: aud_afe_clk + - const: aud_dac_clk + - const: aud_dac_predis_clk + - const: aud_infra_clk + - const: aud_infra_26m_clk + +required: + - compatible + - interrupts + - resets + - reset-names + - mediatek,apmixedsys + - mediatek,infracfg + - mediatek,topckgen + - power-domains + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8192-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/power/mt8192-power.h> + #include <dt-bindings/reset-controller/mt8192-resets.h> + + afe: mt8192-afe-pcm { + compatible = "mediatek,mt8192-audio"; + interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>; + resets = <&watchdog MT8192_TOPRGU_AUDIO_SW_RST>; + reset-names = "audiosys"; + mediatek,apmixedsys = <&apmixedsys>; + mediatek,infracfg = <&infracfg>; + mediatek,topckgen = <&topckgen>; + power-domains = <&scpsys MT8192_POWER_DOMAIN_AUDIO>; + clocks = <&audsys CLK_AUD_AFE>, + <&audsys CLK_AUD_DAC>, + <&audsys CLK_AUD_DAC_PREDIS>, + <&infracfg CLK_INFRA_AUDIO>, + <&infracfg CLK_INFRA_AUDIO_26M_B>; + clock-names = "aud_afe_clk", + "aud_dac_clk", + "aud_dac_predis_clk", + "aud_infra_clk", + "aud_infra_26m_clk"; + }; + +... -- 2.33.0.309.g3052b89438-goog

4 5

[PATCH RFC] virtio: wrap config->reset calls
by Michael S. Tsirkin 18 Oct '21

18 Oct '21

This will enable cleanups down the road. The idea is to disable cbs, then add "flush_queued_cbs" callback as a parameter, this way drivers can flush any work queued after callbacks have been disabled. Signed-off-by: Michael S. Tsirkin <mst(a)redhat.com> --- arch/um/drivers/virt-pci.c | 2 +- drivers/block/virtio_blk.c | 4 ++-- drivers/bluetooth/virtio_bt.c | 2 +- drivers/char/hw_random/virtio-rng.c | 2 +- drivers/char/virtio_console.c | 4 ++-- drivers/crypto/virtio/virtio_crypto_core.c | 8 ++++---- drivers/firmware/arm_scmi/virtio.c | 2 +- drivers/gpio/gpio-virtio.c | 2 +- drivers/gpu/drm/virtio/virtgpu_kms.c | 2 +- drivers/i2c/busses/i2c-virtio.c | 2 +- drivers/iommu/virtio-iommu.c | 2 +- drivers/net/caif/caif_virtio.c | 2 +- drivers/net/virtio_net.c | 4 ++-- drivers/net/wireless/mac80211_hwsim.c | 2 +- drivers/nvdimm/virtio_pmem.c | 2 +- drivers/rpmsg/virtio_rpmsg_bus.c | 2 +- drivers/scsi/virtio_scsi.c | 2 +- drivers/virtio/virtio.c | 5 +++++ drivers/virtio/virtio_balloon.c | 2 +- drivers/virtio/virtio_input.c | 2 +- drivers/virtio/virtio_mem.c | 2 +- fs/fuse/virtio_fs.c | 4 ++-- include/linux/virtio.h | 1 + net/9p/trans_virtio.c | 2 +- net/vmw_vsock/virtio_transport.c | 4 ++-- sound/virtio/virtio_card.c | 4 ++-- 26 files changed, 39 insertions(+), 33 deletions(-) diff --git a/arch/um/drivers/virt-pci.c b/arch/um/drivers/virt-pci.c index c08066633023..22c4d87c9c15 100644 --- a/arch/um/drivers/virt-pci.c +++ b/arch/um/drivers/virt-pci.c @@ -616,7 +616,7 @@ static void um_pci_virtio_remove(struct virtio_device *vdev) int i; /* Stop all virtqueues */ - vdev->config->reset(vdev); + virtio_reset_device(vdev); vdev->config->del_vqs(vdev); device_set_wakeup_enable(&vdev->dev, false); diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index 303caf2d17d0..83d0af3fbf30 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -910,7 +910,7 @@ static void virtblk_remove(struct virtio_device *vdev) mutex_lock(&vblk->vdev_mutex); /* Stop all the virtqueues. */ - vdev->config->reset(vdev); + virtio_reset_device(vdev); /* Virtqueues are stopped, nothing can use vblk->vdev anymore. */ vblk->vdev = NULL; @@ -929,7 +929,7 @@ static int virtblk_freeze(struct virtio_device *vdev) struct virtio_blk *vblk = vdev->priv; /* Ensure we don't receive any more interrupts */ - vdev->config->reset(vdev); + virtio_reset_device(vdev); /* Make sure no work handler is accessing the device. */ flush_work(&vblk->config_work); diff --git a/drivers/bluetooth/virtio_bt.c b/drivers/bluetooth/virtio_bt.c index 57908ce4fae8..24a9258962fa 100644 --- a/drivers/bluetooth/virtio_bt.c +++ b/drivers/bluetooth/virtio_bt.c @@ -364,7 +364,7 @@ static void virtbt_remove(struct virtio_device *vdev) struct hci_dev *hdev = vbt->hdev; hci_unregister_dev(hdev); - vdev->config->reset(vdev); + virtio_reset_device(vdev); hci_free_dev(hdev); vbt->hdev = NULL; diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c index a90001e02bf7..95980489514b 100644 --- a/drivers/char/hw_random/virtio-rng.c +++ b/drivers/char/hw_random/virtio-rng.c @@ -134,7 +134,7 @@ static void remove_common(struct virtio_device *vdev) vi->hwrng_removed = true; vi->data_avail = 0; complete(&vi->have_data); - vdev->config->reset(vdev); + virtio_reset_device(vdev); vi->busy = false; if (vi->hwrng_register_done) hwrng_unregister(&vi->hwrng); diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c index 7eaf303a7a86..08bbd693436f 100644 --- a/drivers/char/virtio_console.c +++ b/drivers/char/virtio_console.c @@ -1957,7 +1957,7 @@ static void virtcons_remove(struct virtio_device *vdev) spin_unlock_irq(&pdrvdata_lock); /* Disable interrupts for vqs */ - vdev->config->reset(vdev); + virtio_reset_device(vdev); /* Finish up work that's lined up */ if (use_multiport(portdev)) cancel_work_sync(&portdev->control_work); @@ -2139,7 +2139,7 @@ static int virtcons_freeze(struct virtio_device *vdev) portdev = vdev->priv; - vdev->config->reset(vdev); + virtio_reset_device(vdev); if (use_multiport(portdev)) virtqueue_disable_cb(portdev->c_ivq); diff --git a/drivers/crypto/virtio/virtio_crypto_core.c b/drivers/crypto/virtio/virtio_crypto_core.c index e2375d992308..8e977b7627cb 100644 --- a/drivers/crypto/virtio/virtio_crypto_core.c +++ b/drivers/crypto/virtio/virtio_crypto_core.c @@ -404,7 +404,7 @@ static int virtcrypto_probe(struct virtio_device *vdev) free_engines: virtcrypto_clear_crypto_engines(vcrypto); free_vqs: - vcrypto->vdev->config->reset(vdev); + virtio_reset_device(vdev); virtcrypto_del_vqs(vcrypto); free_dev: virtcrypto_devmgr_rm_dev(vcrypto); @@ -436,7 +436,7 @@ static void virtcrypto_remove(struct virtio_device *vdev) if (virtcrypto_dev_started(vcrypto)) virtcrypto_dev_stop(vcrypto); - vdev->config->reset(vdev); + virtio_reset_device(vdev); virtcrypto_free_unused_reqs(vcrypto); virtcrypto_clear_crypto_engines(vcrypto); virtcrypto_del_vqs(vcrypto); @@ -456,7 +456,7 @@ static int virtcrypto_freeze(struct virtio_device *vdev) { struct virtio_crypto *vcrypto = vdev->priv; - vdev->config->reset(vdev); + virtio_reset_device(vdev); virtcrypto_free_unused_reqs(vcrypto); if (virtcrypto_dev_started(vcrypto)) virtcrypto_dev_stop(vcrypto); @@ -492,7 +492,7 @@ static int virtcrypto_restore(struct virtio_device *vdev) free_engines: virtcrypto_clear_crypto_engines(vcrypto); free_vqs: - vcrypto->vdev->config->reset(vdev); + virtio_reset_device(vdev); virtcrypto_del_vqs(vcrypto); return err; } diff --git a/drivers/firmware/arm_scmi/virtio.c b/drivers/firmware/arm_scmi/virtio.c index 11e8efb71375..6b8d93fe8848 100644 --- a/drivers/firmware/arm_scmi/virtio.c +++ b/drivers/firmware/arm_scmi/virtio.c @@ -452,7 +452,7 @@ static void scmi_vio_remove(struct virtio_device *vdev) * outstanding message on any vqueue to be ignored by complete_cb: now * we can just stop processing buffers and destroy the vqueues. */ - vdev->config->reset(vdev); + virtio_reset_device(vdev); vdev->config->del_vqs(vdev); /* Ensure scmi_vdev is visible as NULL */ smp_store_mb(scmi_vdev, NULL); diff --git a/drivers/gpio/gpio-virtio.c b/drivers/gpio/gpio-virtio.c index d24f1c9264bc..5029f01966f4 100644 --- a/drivers/gpio/gpio-virtio.c +++ b/drivers/gpio/gpio-virtio.c @@ -203,7 +203,7 @@ static void virtio_gpio_request_vq(struct virtqueue *vq) static void virtio_gpio_free_vqs(struct virtio_device *vdev) { - vdev->config->reset(vdev); + virtio_reset_device(vdev); vdev->config->del_vqs(vdev); } diff --git a/drivers/gpu/drm/virtio/virtgpu_kms.c b/drivers/gpu/drm/virtio/virtgpu_kms.c index f3379059f324..6aa605b8d3a1 100644 --- a/drivers/gpu/drm/virtio/virtgpu_kms.c +++ b/drivers/gpu/drm/virtio/virtgpu_kms.c @@ -257,7 +257,7 @@ void virtio_gpu_deinit(struct drm_device *dev) flush_work(&vgdev->ctrlq.dequeue_work); flush_work(&vgdev->cursorq.dequeue_work); flush_work(&vgdev->config_changed_work); - vgdev->vdev->config->reset(vgdev->vdev); + virtio_reset_device(vgdev->vdev); vgdev->vdev->config->del_vqs(vgdev->vdev); } diff --git a/drivers/i2c/busses/i2c-virtio.c b/drivers/i2c/busses/i2c-virtio.c index f10a603b13fb..eb3261ac64dc 100644 --- a/drivers/i2c/busses/i2c-virtio.c +++ b/drivers/i2c/busses/i2c-virtio.c @@ -177,7 +177,7 @@ static int virtio_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, static void virtio_i2c_del_vqs(struct virtio_device *vdev) { - vdev->config->reset(vdev); + virtio_reset_device(vdev); vdev->config->del_vqs(vdev); } diff --git a/drivers/iommu/virtio-iommu.c b/drivers/iommu/virtio-iommu.c index 80930ce04a16..1d4e1e7cf175 100644 --- a/drivers/iommu/virtio-iommu.c +++ b/drivers/iommu/virtio-iommu.c @@ -1115,7 +1115,7 @@ static void viommu_remove(struct virtio_device *vdev) iommu_device_unregister(&viommu->iommu); /* Stop all virtqueues */ - vdev->config->reset(vdev); + virtio_reset_device(vdev); vdev->config->del_vqs(vdev); dev_info(&vdev->dev, "device removed\n"); diff --git a/drivers/net/caif/caif_virtio.c b/drivers/net/caif/caif_virtio.c index 91230894692d..444ef6a342f6 100644 --- a/drivers/net/caif/caif_virtio.c +++ b/drivers/net/caif/caif_virtio.c @@ -754,7 +754,7 @@ static void cfv_remove(struct virtio_device *vdev) debugfs_remove_recursive(cfv->debugfs); vringh_kiov_cleanup(&cfv->ctx.riov); - vdev->config->reset(vdev); + virtio_reset_device(vdev); vdev->vringh_config->del_vrhs(cfv->vdev); cfv->vr_rx = NULL; vdev->config->del_vqs(cfv->vdev); diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 79bd2585ec6b..8c10fcad73a4 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -3274,7 +3274,7 @@ static int virtnet_probe(struct virtio_device *vdev) return 0; free_unregister_netdev: - vi->vdev->config->reset(vdev); + virtio_reset_device(vdev); unregister_netdev(dev); free_failover: @@ -3290,7 +3290,7 @@ static int virtnet_probe(struct virtio_device *vdev) static void remove_vq_common(struct virtnet_info *vi) { - vi->vdev->config->reset(vi->vdev); + virtio_reset_device(vi->vdev); /* Free unused buffers in both send and recv, if any. */ free_unused_bufs(vi); diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 0adae76eb8df..9ee430c1d4a2 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -4369,7 +4369,7 @@ static void remove_vqs(struct virtio_device *vdev) { int i; - vdev->config->reset(vdev); + virtio_reset_device(vdev); for (i = 0; i < ARRAY_SIZE(hwsim_vqs); i++) { struct virtqueue *vq = hwsim_vqs[i]; diff --git a/drivers/nvdimm/virtio_pmem.c b/drivers/nvdimm/virtio_pmem.c index 726c7354d465..995b6cdc67ed 100644 --- a/drivers/nvdimm/virtio_pmem.c +++ b/drivers/nvdimm/virtio_pmem.c @@ -105,7 +105,7 @@ static void virtio_pmem_remove(struct virtio_device *vdev) nvdimm_bus_unregister(nvdimm_bus); vdev->config->del_vqs(vdev); - vdev->config->reset(vdev); + virtio_reset_device(vdev); } static struct virtio_driver virtio_pmem_driver = { diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c index 8e49a3bacfc7..6a11952822df 100644 --- a/drivers/rpmsg/virtio_rpmsg_bus.c +++ b/drivers/rpmsg/virtio_rpmsg_bus.c @@ -1015,7 +1015,7 @@ static void rpmsg_remove(struct virtio_device *vdev) size_t total_buf_space = vrp->num_bufs * vrp->buf_size; int ret; - vdev->config->reset(vdev); + virtio_reset_device(vdev); ret = device_for_each_child(&vdev->dev, NULL, rpmsg_remove_device); if (ret) diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c index 07d0250f17c3..f2502a8a5213 100644 --- a/drivers/scsi/virtio_scsi.c +++ b/drivers/scsi/virtio_scsi.c @@ -778,7 +778,7 @@ static void virtscsi_init_vq(struct virtio_scsi_vq *virtscsi_vq, static void virtscsi_remove_vqs(struct virtio_device *vdev) { /* Stop all the virtqueues. */ - vdev->config->reset(vdev); + virtio_reset_device(vdev); vdev->config->del_vqs(vdev); } diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c index 0a5b54034d4b..a67dd0eca578 100644 --- a/drivers/virtio/virtio.c +++ b/drivers/virtio/virtio.c @@ -204,6 +204,11 @@ int virtio_finalize_features(struct virtio_device *dev) } EXPORT_SYMBOL_GPL(virtio_finalize_features); +static void virtio_reset_device(struct virtio_device *dev) +{ + dev->config->reset(dev); +} + static int virtio_dev_probe(struct device *_d) { int err, i; diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c index c22ff0117b46..f4c34a2a6b8e 100644 --- a/drivers/virtio/virtio_balloon.c +++ b/drivers/virtio/virtio_balloon.c @@ -1056,7 +1056,7 @@ static void remove_common(struct virtio_balloon *vb) return_free_pages_to_mm(vb, ULONG_MAX); /* Now we reset the device so we can clean up the queues. */ - vb->vdev->config->reset(vb->vdev); + virtio_reset_device(vb->vdev); vb->vdev->config->del_vqs(vb->vdev); } diff --git a/drivers/virtio/virtio_input.c b/drivers/virtio/virtio_input.c index ce51ae165943..3aa46703872d 100644 --- a/drivers/virtio/virtio_input.c +++ b/drivers/virtio/virtio_input.c @@ -347,7 +347,7 @@ static void virtinput_remove(struct virtio_device *vdev) spin_unlock_irqrestore(&vi->lock, flags); input_unregister_device(vi->idev); - vdev->config->reset(vdev); + virtio_reset_device(vdev); while ((buf = virtqueue_detach_unused_buf(vi->sts)) != NULL) kfree(buf); vdev->config->del_vqs(vdev); diff --git a/drivers/virtio/virtio_mem.c b/drivers/virtio/virtio_mem.c index bef8ad6bf466..3bab0a625a4b 100644 --- a/drivers/virtio/virtio_mem.c +++ b/drivers/virtio/virtio_mem.c @@ -2722,7 +2722,7 @@ static void virtio_mem_remove(struct virtio_device *vdev) } /* reset the device and cleanup the queues */ - vdev->config->reset(vdev); + virtio_reset_device(vdev); vdev->config->del_vqs(vdev); kfree(vm); diff --git a/fs/fuse/virtio_fs.c b/fs/fuse/virtio_fs.c index 0ad89c6629d7..27c3b74070a2 100644 --- a/fs/fuse/virtio_fs.c +++ b/fs/fuse/virtio_fs.c @@ -895,7 +895,7 @@ static int virtio_fs_probe(struct virtio_device *vdev) return 0; out_vqs: - vdev->config->reset(vdev); + virtio_reset_device(vdev); virtio_fs_cleanup_vqs(vdev, fs); kfree(fs->vqs); @@ -927,7 +927,7 @@ static void virtio_fs_remove(struct virtio_device *vdev) list_del_init(&fs->list); virtio_fs_stop_all_queues(fs); virtio_fs_drain_all_queues_locked(fs); - vdev->config->reset(vdev); + virtio_reset_device(vdev); virtio_fs_cleanup_vqs(vdev, fs); vdev->priv = NULL; diff --git a/include/linux/virtio.h b/include/linux/virtio.h index 41edbc01ffa4..72292a62cd90 100644 --- a/include/linux/virtio.h +++ b/include/linux/virtio.h @@ -138,6 +138,7 @@ int virtio_finalize_features(struct virtio_device *dev); int virtio_device_freeze(struct virtio_device *dev); int virtio_device_restore(struct virtio_device *dev); #endif +void virtio_reset_device(struct virtio_device *dev); size_t virtio_max_dma_size(struct virtio_device *vdev); diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c index 490a4c900339..19c69821dd04 100644 --- a/net/9p/trans_virtio.c +++ b/net/9p/trans_virtio.c @@ -721,7 +721,7 @@ static void p9_virtio_remove(struct virtio_device *vdev) mutex_unlock(&virtio_9p_lock); - vdev->config->reset(vdev); + virtio_reset_device(vdev); vdev->config->del_vqs(vdev); sysfs_remove_file(&(vdev->dev.kobj), &dev_attr_mount_tag.attr); diff --git a/net/vmw_vsock/virtio_transport.c b/net/vmw_vsock/virtio_transport.c index 4f7c99dfd16c..fb3302fff627 100644 --- a/net/vmw_vsock/virtio_transport.c +++ b/net/vmw_vsock/virtio_transport.c @@ -665,7 +665,7 @@ static void virtio_vsock_remove(struct virtio_device *vdev) vsock_for_each_connected_socket(virtio_vsock_reset_sock); /* Stop all work handlers to make sure no one is accessing the device, - * so we can safely call vdev->config->reset(). + * so we can safely call virtio_reset_device(). */ mutex_lock(&vsock->rx_lock); vsock->rx_run = false; @@ -682,7 +682,7 @@ static void virtio_vsock_remove(struct virtio_device *vdev) /* Flush all device writes and interrupts, device will not use any * more buffers. */ - vdev->config->reset(vdev); + virtio_reset_device(vdev); mutex_lock(&vsock->rx_lock); while ((pkt = virtqueue_detach_unused_buf(vsock->vqs[VSOCK_VQ_RX]))) diff --git a/sound/virtio/virtio_card.c b/sound/virtio/virtio_card.c index 150ab3e37013..e2847c040f75 100644 --- a/sound/virtio/virtio_card.c +++ b/sound/virtio/virtio_card.c @@ -350,7 +350,7 @@ static void virtsnd_remove(struct virtio_device *vdev) snd_card_free(snd->card); vdev->config->del_vqs(vdev); - vdev->config->reset(vdev); + virtio_reset_device(vdev); for (i = 0; snd->substreams && i < snd->nsubstreams; ++i) { struct virtio_pcm_substream *vss = &snd->substreams[i]; @@ -379,7 +379,7 @@ static int virtsnd_freeze(struct virtio_device *vdev) virtsnd_ctl_msg_cancel_all(snd); vdev->config->del_vqs(vdev); - vdev->config->reset(vdev); + virtio_reset_device(vdev); for (i = 0; i < snd->nsubstreams; ++i) cancel_work_sync(&snd->substreams[i].elapsed_period); -- MST

12 13

[v2 1/2] ASoC: dt-bindings: max98520: changed signed-off-by email address
by George Song 18 Oct '21

18 Oct '21

changed signed-off-by email address to maximintegrated group. Signed-off-by: George Song <george.song(a)maximintegrated.com> --- Documentation/devicetree/bindings/sound/maxim,max98520.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/sound/maxim,max98520.yaml b/Documentation/devicetree/bindings/sound/maxim,max98520.yaml index d1f2b5ee775a..ad38f56e1c49 100644 --- a/Documentation/devicetree/bindings/sound/maxim,max98520.yaml +++ b/Documentation/devicetree/bindings/sound/maxim,max98520.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Maxim Integrated MAX98520 Speaker Amplifier Driver maintainers: - - George Song <George.song(a)analog.com> + - George Song <George.song(a)maximintegrated.com> properties: compatible: -- 2.25.1

2 5

[PATCH 0/4] Getting rid of the reset controller in i2s-tdm
by Nicolas Frattaroli 17 Oct '21

17 Oct '21

Hello, after some discussion with Heiko on IRC, he has admitted to me that the rockchip,cru property, and its corresponding half a reset controller in the driver, is weighing heavily on his mind. The background is that if the lrck only uses one clock for both rx and tx direction, then according to the downstream driver, the rx and tx resets should be asserted at roughly the same time to keep things in sync. Since there is no existing kernel way of doing this, the driver would manually write to the CRU's registers to achieve this, violating abstractions. We've agreed that an atomic bulk reset API would be the best way to achieve what it does in a clean fashion. The details of such an API have yet to be worked out by me, but as it turns out, this is not a pressing need. During my investigation, I noticed that I can simply drop the synchronised reset for now and assert the two resets manually one after the other, and deassert them in the same manner. For the case I care about, which is audio playback, this seems to work just fine. Should someone actually find a case where this causes a problem, it should be fixed with an atomic bulk reset API. Patch 1 removes the direct CRU writing stuff from the i2s-tdm driver. Patch 2 drops the rockchip,cru property from the bindings; they have not yet been in a kernel release, so as far as I know, we can still change them with no regard for backwards compatibility. Patch 3 adds the rk356x i2s1 node without the rockchip,cru property. Patch 4 adds the analog audio output on Quartz64, included here for Heiko's convenience. Regards, Nicolas Frattaroli Nicolas Frattaroli (4): ASoC: rockchip: i2s-tdm: Strip out direct CRU use ASoC: dt-bindings: rockchip: i2s-tdm: Drop rockchip,cru property arm64: dts: rockchip: Add i2s1 on rk356x arm64: dts: rockchip: Add analog audio on Quartz64 .../bindings/sound/rockchip,i2s-tdm.yaml | 16 --- .../boot/dts/rockchip/rk3566-quartz64-a.dts | 31 ++++- arch/arm64/boot/dts/rockchip/rk356x.dtsi | 25 ++++ sound/soc/rockchip/rockchip_i2s_tdm.c | 126 +++--------------- 4 files changed, 76 insertions(+), 122 deletions(-) -- 2.33.1

3 6