September 2020 - Alsa-devel - mailman.alsa-project.org

[PATCH] ASoC: fsl_sai: Set SAI Channel Mode to Output Mode
by Shengjiu Wang 03 Sep '20

03 Sep '20

Transmit data pins will output zero when slots are masked or channels are disabled. In CHMOD TDM mode, transmit data pins are tri-stated when slots are masked or channels are disabled. When data pins are tri-stated, there is noise on some channels when FS clock value is high and data is read while fsclk is transitioning from high to low. Signed-off-by: Cosmin-Gabriel Samoila <cosmin.samoila(a)nxp.com> Signed-off-by: Shengjiu Wang <shengjiu.wang(a)nxp.com> --- sound/soc/fsl/fsl_sai.c | 12 ++++++++++-- sound/soc/fsl/fsl_sai.h | 2 ++ 2 files changed, 12 insertions(+), 2 deletions(-) diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c index 62c5fdb678fc..33b194a5c1dc 100644 --- a/sound/soc/fsl/fsl_sai.c +++ b/sound/soc/fsl/fsl_sai.c @@ -486,6 +486,12 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream, val_cr4 |= FSL_SAI_CR4_FRSZ(slots); + /* Output Mode - data pins transmit 0 when slots are masked + * or channels are disabled + */ + if (tx) + val_cr4 |= FSL_SAI_CR4_CHMOD; + /* * For SAI master mode, when Tx(Rx) sync with Rx(Tx) clock, Rx(Tx) will * generate bclk and frame clock for Tx(Rx), we should set RCR4(TCR4), @@ -494,7 +500,8 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream, if (!sai->is_slave_mode && fsl_sai_dir_is_synced(sai, adir)) { regmap_update_bits(sai->regmap, FSL_SAI_xCR4(!tx, ofs), - FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK, + FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK | + FSL_SAI_CR4_CHMOD_MASK, val_cr4); regmap_update_bits(sai->regmap, FSL_SAI_xCR5(!tx, ofs), FSL_SAI_CR5_WNW_MASK | FSL_SAI_CR5_W0W_MASK | @@ -502,7 +509,8 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream, } regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx, ofs), - FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK, + FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK | + FSL_SAI_CR4_CHMOD_MASK, val_cr4); regmap_update_bits(sai->regmap, FSL_SAI_xCR5(tx, ofs), FSL_SAI_CR5_WNW_MASK | FSL_SAI_CR5_W0W_MASK | diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h index 6aba7d28f5f3..19cd4e1bbff9 100644 --- a/sound/soc/fsl/fsl_sai.h +++ b/sound/soc/fsl/fsl_sai.h @@ -119,6 +119,8 @@ #define FSL_SAI_CR4_FRSZ_MASK (0x1f << 16) #define FSL_SAI_CR4_SYWD(x) (((x) - 1) << 8) #define FSL_SAI_CR4_SYWD_MASK (0x1f << 8) +#define FSL_SAI_CR4_CHMOD BIT(5) +#define FSL_SAI_CR4_CHMOD_MASK BIT(5) #define FSL_SAI_CR4_MF BIT(4) #define FSL_SAI_CR4_FSE BIT(3) #define FSL_SAI_CR4_FSP BIT(1) -- 2.27.0

3 2

[PATCH] ASoC: Intel: bytcr_rt5640: Add quirk for MPMAN Converter9 2-in-1
by Hans de Goede 02 Sep '20

02 Sep '20

The MPMAN Converter9 2-in-1 almost fully works with out default settings. The only problem is that it has only 1 speaker so any sounds only playing on the right channel get lost. Add a quirk for this model using the default settings + MONO_SPEAKER. Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> --- sound/soc/intel/boards/bytcr_rt5640.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index 479992f4e97a..fc202747ba83 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -591,6 +591,16 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { BYT_RT5640_SSP0_AIF1 | BYT_RT5640_MCLK_EN), }, + { /* MPMAN Converter 9, similar hw as the I.T.Works TW891 2-in-1 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "MPMAN"), + DMI_MATCH(DMI_PRODUCT_NAME, "Converter9"), + }, + .driver_data = (void *)(BYTCR_INPUT_DEFAULTS | + BYT_RT5640_MONO_SPEAKER | + BYT_RT5640_SSP0_AIF1 | + BYT_RT5640_MCLK_EN), + }, { /* MPMAN MPWIN895CL */ .matches = { -- 2.28.0

3 2

[PATCH] ALSA: hda: use consistent HDAudio spelling in comments/docs
by Kai Vehmanen 02 Sep '20

02 Sep '20

From: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> We use HDaudio and HDAudio, pick one to make searches easier. No functionality change Also fix timestamping typo in documentation. Reported-by: Guennadi Liakhovetski <guennadi.liakhovetski(a)linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski(a)linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen(a)linux.intel.com> --- Documentation/sound/designs/timestamping.rst | 2 +- sound/hda/intel-dsp-config.c | 10 +++++----- sound/x86/Kconfig | 2 +- 3 files changed, 7 insertions(+), 7 deletions(-) diff --git a/Documentation/sound/designs/timestamping.rst b/Documentation/sound/designs/timestamping.rst index 2b0fff503415..7c7ecf5dbc4b 100644 --- a/Documentation/sound/designs/timestamping.rst +++ b/Documentation/sound/designs/timestamping.rst @@ -143,7 +143,7 @@ timestamp shows when the information is put together by the driver before returning from the ``STATUS`` and ``STATUS_EXT`` ioctl. in most cases this driver_timestamp will be identical to the regular system tstamp. -Examples of typestamping with HDaudio: +Examples of timestamping with HDAudio: 1. DMA timestamp, no compensation for DMA+analog delay :: diff --git a/sound/hda/intel-dsp-config.c b/sound/hda/intel-dsp-config.c index 99aec7349167..1c5114dedda9 100644 --- a/sound/hda/intel-dsp-config.c +++ b/sound/hda/intel-dsp-config.c @@ -54,7 +54,7 @@ static const struct config_entry config_table[] = { #endif /* * Apollolake (Broxton-P) - * the legacy HDaudio driver is used except on Up Squared (SOF) and + * the legacy HDAudio driver is used except on Up Squared (SOF) and * Chromebooks (SST) */ #if IS_ENABLED(CONFIG_SND_SOC_SOF_APOLLOLAKE) @@ -89,7 +89,7 @@ static const struct config_entry config_table[] = { }, #endif /* - * Skylake and Kabylake use legacy HDaudio driver except for Google + * Skylake and Kabylake use legacy HDAudio driver except for Google * Chromebooks (SST) */ @@ -135,7 +135,7 @@ static const struct config_entry config_table[] = { #endif /* - * Geminilake uses legacy HDaudio driver except for Google + * Geminilake uses legacy HDAudio driver except for Google * Chromebooks */ /* Geminilake */ @@ -157,7 +157,7 @@ static const struct config_entry config_table[] = { /* * CoffeeLake, CannonLake, CometLake, IceLake, TigerLake use legacy - * HDaudio driver except for Google Chromebooks and when DMICs are + * HDAudio driver except for Google Chromebooks and when DMICs are * present. Two cases are required since Coreboot does not expose NHLT * tables. * @@ -391,7 +391,7 @@ int snd_intel_dsp_driver_probe(struct pci_dev *pci) if (pci->class == 0x040300) return SND_INTEL_DSP_DRIVER_LEGACY; if (pci->class != 0x040100 && pci->class != 0x040380) { - dev_err(&pci->dev, "Unknown PCI class/subclass/prog-if information (0x%06x) found, selecting HDA legacy driver\n", pci->class); + dev_err(&pci->dev, "Unknown PCI class/subclass/prog-if information (0x%06x) found, selecting HDAudio legacy driver\n", pci->class); return SND_INTEL_DSP_DRIVER_LEGACY; } diff --git a/sound/x86/Kconfig b/sound/x86/Kconfig index 77777192f650..4ffcc5e623c2 100644 --- a/sound/x86/Kconfig +++ b/sound/x86/Kconfig @@ -9,7 +9,7 @@ menuconfig SND_X86 if SND_X86 config HDMI_LPE_AUDIO - tristate "HDMI audio without HDaudio on Intel Atom platforms" + tristate "HDMI audio without HDAudio on Intel Atom platforms" depends on DRM_I915 select SND_PCM help -- 2.27.0

2 1

[PATCH] ALSA: hda: add dev_dbg log when driver is not selected
by Kai Vehmanen 02 Sep '20

02 Sep '20

From: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> On SKL+ Intel platforms, the driver selection is handled by the snd_intel_dspcfg, and when the HDaudio legacy driver is not selected, be it with the auto-selection or user preferences with a kernel parameter, the probe aborts with no logs, only a -ENODEV return value. Having no dmesg trace, even with dynamic debug enabled, makes support more complicated than it needs to be, and even experienced users can be fooled. A simple dev_dbg() trace solves this problem. BugLink: https://github.com/thesofproject/linux/issues/2330 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski(a)linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen(a)linux.intel.com> --- sound/pci/hda/hda_intel.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 0f86e3765bb3..36a9dbc33aa0 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2127,9 +2127,10 @@ static int azx_probe(struct pci_dev *pci, */ if (dmic_detect) { err = snd_intel_dsp_driver_probe(pci); - if (err != SND_INTEL_DSP_DRIVER_ANY && - err != SND_INTEL_DSP_DRIVER_LEGACY) + if (err != SND_INTEL_DSP_DRIVER_ANY && err != SND_INTEL_DSP_DRIVER_LEGACY) { + dev_dbg(&pci->dev, "HDAudio driver not selected, aborting probe\n"); return -ENODEV; + } } else { dev_warn(&pci->dev, "dmic_detect option is deprecated, pass snd-intel-dspcfg.dsp_driver=1 option instead\n"); } -- 2.27.0

2 1

[PATCH] ALSA: hda: fix a runtime pm issue in SOF when integrated GPU is disabled
by Kai Vehmanen 02 Sep '20

02 Sep '20

From: Rander Wang <rander.wang(a)intel.com> In snd_hdac_device_init pm_runtime_set_active is called to increase child_count in parent device. But when it is failed to build connection with GPU for one case that integrated graphic gpu is disabled, snd_hdac_ext_bus_device_exit will be invoked to clean up a HD-audio extended codec base device. At this time the child_count of parent is not decreased, which makes parent device can't get suspended. This patch calls pm_runtime_set_suspended to decrease child_count in parent device in snd_hdac_device_exit to match with snd_hdac_device_init. pm_runtime_set_suspended can make sure that it will not decrease child_count if the device is already suspended. Signed-off-by: Rander Wang <rander.wang(a)intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski(a)linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen(a)linux.intel.com> --- sound/hda/hdac_device.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/hda/hdac_device.c b/sound/hda/hdac_device.c index 333220f0f8af..3e9e9ac804f6 100644 --- a/sound/hda/hdac_device.c +++ b/sound/hda/hdac_device.c @@ -127,6 +127,8 @@ EXPORT_SYMBOL_GPL(snd_hdac_device_init); void snd_hdac_device_exit(struct hdac_device *codec) { pm_runtime_put_noidle(&codec->dev); + /* keep balance of runtime PM child_count in parent device */ + pm_runtime_set_suspended(&codec->dev); snd_hdac_bus_remove_device(codec->bus, codec); kfree(codec->vendor_name); kfree(codec->chip_name); -- 2.27.0

2 1

[PATCH] ALSA: hda: hdmi - add Rocketlake support
by Kai Vehmanen 02 Sep '20

02 Sep '20

From: Rander Wang <rander.wang(a)intel.com> Add Rocketlake HDMI codec support. Rocketlake shares the pin-to-port mapping table with Tigerlake. Signed-off-by: Rander Wang <rander.wang(a)intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen(a)linux.intel.com> --- sound/pci/hda/patch_hdmi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 1e1b13eb7829..402050088090 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -4269,6 +4269,7 @@ HDA_CODEC_ENTRY(0x8086280c, "Cannonlake HDMI", patch_i915_glk_hdmi), HDA_CODEC_ENTRY(0x8086280d, "Geminilake HDMI", patch_i915_glk_hdmi), HDA_CODEC_ENTRY(0x8086280f, "Icelake HDMI", patch_i915_icl_hdmi), HDA_CODEC_ENTRY(0x80862812, "Tigerlake HDMI", patch_i915_tgl_hdmi), +HDA_CODEC_ENTRY(0x80862816, "Rocketlake HDMI", patch_i915_tgl_hdmi), HDA_CODEC_ENTRY(0x8086281a, "Jasperlake HDMI", patch_i915_icl_hdmi), HDA_CODEC_ENTRY(0x8086281b, "Elkhartlake HDMI", patch_i915_icl_hdmi), HDA_CODEC_ENTRY(0x80862880, "CedarTrail HDMI", patch_generic_hdmi), -- 2.27.0

2 1

general protection fault in snd_ctl_release
by syzbot 02 Sep '20

02 Sep '20

Hello, syzbot found the following issue on: HEAD commit: b51594df Merge tag 'docs-5.9-3' of git://git.lwn.net/linux git tree: upstream console output: https://syzkaller.appspot.com/x/log.txt?x=172fea15900000 kernel config: https://syzkaller.appspot.com/x/.config?x=3c5f6ce8d5b68299 dashboard link: https://syzkaller.appspot.com/bug?extid=dd94e1d44f61c258d538 compiler: gcc (GCC) 10.1.0-syz 20200507 syz repro: https://syzkaller.appspot.com/x/repro.syz?x=179811c1900000 The issue was bisected to: commit a9ed4a6560b8562b7e2e2bed9527e88001f7b682 Author: Marc Zyngier <maz(a)kernel.org> Date: Wed Aug 19 16:12:17 2020 +0000 epoll: Keep a reference on files added to the check list bisection log: https://syzkaller.appspot.com/x/bisect.txt?x=14406199900000 final oops: https://syzkaller.appspot.com/x/report.txt?x=16406199900000 console output: https://syzkaller.appspot.com/x/log.txt?x=12406199900000 IMPORTANT: if you fix the issue, please add the following tag to the commit: Reported-by: syzbot+dd94e1d44f61c258d538(a)syzkaller.appspotmail.com Fixes: a9ed4a6560b8 ("epoll: Keep a reference on files added to the check list") general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 0 PID: 7429 Comm: syz-executor.0 Not tainted 5.9.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:snd_ctl_release+0x69/0x3e0 sound/core/control.c:114 Code: 44 24 10 4c 8b b0 b0 01 00 00 48 c7 80 b0 01 00 00 00 00 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7e 10 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 f7 02 00 00 49 8b 46 10 4d 8d 6e 08 4c 8d a0 48 RSP: 0018:ffffc900073bfe10 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff8880a2a9fcc0 RCX: 1ffffffff11eb3f0 RDX: 0000000000000002 RSI: ffffffff860cbd2b RDI: 0000000000000010 RBP: ffff8880a2a9fcc0 R08: 0000000000000001 R09: ffffffff89cc5567 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880a2a9fd44 R13: ffff8880a2a9fce8 R14: 0000000000000000 R15: ffff8880a4bc1468 FS: 00007f30f5cd0700(0000) GS:ffff8880ae600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000096ced000 CR4: 00000000001506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __fput+0x285/0x920 fs/file_table.c:281 task_work_run+0xdd/0x190 kernel/task_work.c:141 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_user_mode_loop kernel/entry/common.c:140 [inline] exit_to_user_mode_prepare+0x1e1/0x200 kernel/entry/common.c:167 syscall_exit_to_user_mode+0x7e/0x2e0 kernel/entry/common.c:242 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45d5b9 Code: 5d b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f30f5ccfc78 EFLAGS: 00000246 ORIG_RAX: 00000000000000e9 RAX: 0000000000000000 RBX: 0000000000002ac0 RCX: 000000000045d5b9 RDX: 0000000000000004 RSI: 0000000000000001 RDI: 0000000000000006 RBP: 000000000118cf88 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000020000180 R11: 0000000000000246 R12: 000000000118cf4c R13: 000000000169fb6f R14: 00007f30f5cd09c0 R15: 000000000118cf4c Modules linked in: ---[ end trace d1d5678dff9246de ]--- RIP: 0010:snd_ctl_release+0x69/0x3e0 sound/core/control.c:114 Code: 44 24 10 4c 8b b0 b0 01 00 00 48 c7 80 b0 01 00 00 00 00 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7e 10 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 f7 02 00 00 49 8b 46 10 4d 8d 6e 08 4c 8d a0 48 RSP: 0018:ffffc900073bfe10 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff8880a2a9fcc0 RCX: 1ffffffff11eb3f0 RDX: 0000000000000002 RSI: ffffffff860cbd2b RDI: 0000000000000010 RBP: ffff8880a2a9fcc0 R08: 0000000000000001 R09: ffffffff89cc5567 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880a2a9fd44 R13: ffff8880a2a9fce8 R14: 0000000000000000 R15: ffff8880a4bc1468 FS: 00007f30f5cd0700(0000) GS:ffff8880ae600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000096ced000 CR4: 00000000001506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 --- This report is generated by a bot. It may contain errors. See https://goo.gl/tpsmEJ for more information about syzbot. syzbot engineers can be reached at syzkaller(a)googlegroups.com. syzbot will keep track of this issue. See: https://goo.gl/tpsmEJ#status for how to communicate with syzbot. For information about bisection process see: https://goo.gl/tpsmEJ#bisection syzbot can test patches for this issue, for details see: https://goo.gl/tpsmEJ#testing-patches

3 4

Miss mapping to unmute the middle speakers for Creative X-Fi with 20K1 chipset cards in analog-output.conf
by GitHub issues - edited 02 Sep '20

02 Sep '20

alsa-project/alsa-utils issue #54 was edited from deathxxx123: Hi there. I want to report some bug, that is present from long time and i think that can be fixed now. With any configuration that uses center/subwoofer, that center gets muted by default for Creative X-Fi with 20K1 chipset cards, but if you have other card, that will not happen, because of missing configuration for Center/Subwoofer in `analog-output.conf`. The missing thing in `analog-output.conf` is: ``` [Element Center/LFE] switch = mute volume = merge override-map.1 = center,lfe ``` You can see my issue and fix there: https://github.com/gamer-os/gamer-os/issues/131 Issue URL : https://github.com/alsa-project/alsa-utils/issues/54 Repository URL: https://github.com/alsa-project/alsa-utils

1 0

Miss mapping to unmute the middle speakers for Creative X-Fi with 20K1 chipset cards in analog-output.conf
by GitHub issues - edited 02 Sep '20

02 Sep '20

alsa-project/alsa-utils issue #54 was edited from deathxxx123: Hi there. I want to report some bug, that is present from long time and i think that can be fixed now. With any configuration that uses center/subwoofer, that center gets muted by default for Creative X-Fi with 20K1 chipset cards, but if you have other card, that will not happen, because of missing configuration in `analog-output.conf`. The missing thing in `analog-output.conf` is: ``` [Element Center/LFE] switch = mute volume = merge override-map.1 = center,lfe ``` You can see my issue and fix there: https://github.com/gamer-os/gamer-os/issues/131 Issue URL : https://github.com/alsa-project/alsa-utils/issues/54 Repository URL: https://github.com/alsa-project/alsa-utils

1 0

Miss mapping to unmute the middle speakers for Creative X-Fi with 20K1 chipset cards in analog-output.conf
by GitHub issues - edited 02 Sep '20

02 Sep '20

alsa-project/alsa-utils issue #54 was edited from deathxxx123: Hi there. I want to report some bug, that is present from long time and i think that can be fixed now. With any configuration that uses center/subwoofer, that center gets muted by default for Creative X-Fi with 20K1 chipset cards, but if you have other card, that will not happen, because of missing mapping in `analog-output.conf`. The missing thing in `analog-output.conf` is: ``` [Element Center/LFE] switch = mute volume = merge override-map.1 = center,lfe ``` You can see my issue and fix there: https://github.com/gamer-os/gamer-os/issues/131 Issue URL : https://github.com/alsa-project/alsa-utils/issues/54 Repository URL: https://github.com/alsa-project/alsa-utils

1 0