September 2020 - Alsa-devel - mailman.alsa-project.org

[PATCH AUTOSEL 5.8 04/20] ASoC: wm8994: Ensure the device is resumed in wm89xx_mic_detect functions
by Sasha Levin 21 Sep '20

21 Sep '20

From: Sylwester Nawrocki <s.nawrocki(a)samsung.com> [ Upstream commit f5a2cda4f1db89776b64c4f0f2c2ac609527ac70 ] When the wm8958_mic_detect, wm8994_mic_detect functions get called from the machine driver, e.g. from the card's late_probe() callback, the CODEC device may be PM runtime suspended and any regmap writes have no effect. Add PM runtime calls to these functions to ensure the device registers are updated as expected. This suppresses an error during boot "wm8994-codec: ASoC: error at snd_soc_component_update_bits on wm8994-codec" caused by the regmap access error due to the cache_only flag being set. Signed-off-by: Sylwester Nawrocki <s.nawrocki(a)samsung.com> Acked-by: Krzysztof Kozlowski <krzk(a)kernel.org> Acked-by: Charles Keepax <ckeepax(a)opensource.cirrus.com> Link: https://lore.kernel.org/r/20200827173357.31891-2-s.nawrocki@samsung.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/codecs/wm8994.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index c2116836a7203..58f21329d0e99 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -3491,6 +3491,8 @@ int wm8994_mic_detect(struct snd_soc_component *component, struct snd_soc_jack * return -EINVAL; } + pm_runtime_get_sync(component->dev); + switch (micbias) { case 1: micdet = &wm8994->micdet[0]; @@ -3538,6 +3540,8 @@ int wm8994_mic_detect(struct snd_soc_component *component, struct snd_soc_jack * snd_soc_dapm_sync(dapm); + pm_runtime_put(component->dev); + return 0; } EXPORT_SYMBOL_GPL(wm8994_mic_detect); @@ -3905,6 +3909,8 @@ int wm8958_mic_detect(struct snd_soc_component *component, struct snd_soc_jack * return -EINVAL; } + pm_runtime_get_sync(component->dev); + if (jack) { snd_soc_dapm_force_enable_pin(dapm, "CLK_SYS"); snd_soc_dapm_sync(dapm); @@ -3973,6 +3979,8 @@ int wm8958_mic_detect(struct snd_soc_component *component, struct snd_soc_jack * snd_soc_dapm_sync(dapm); } + pm_runtime_put(component->dev); + return 0; } EXPORT_SYMBOL_GPL(wm8958_mic_detect); -- 2.25.1

1 0

[PATCH AUTOSEL 5.8 02/20] ASoC: pcm3168a: ignore 0 Hz settings
by Sasha Levin 21 Sep '20

21 Sep '20

From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> [ Upstream commit 7ad26d6671db758c959d7e1d100b138a38483612 ] Some sound card try to set 0 Hz as reset, but it is impossible. This patch ignores it to avoid error return. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Link: https://lore.kernel.org/r/87a6yjy5sy.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/codecs/pcm3168a.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/soc/codecs/pcm3168a.c b/sound/soc/codecs/pcm3168a.c index 9711fab296ebc..045c6f8b26bef 100644 --- a/sound/soc/codecs/pcm3168a.c +++ b/sound/soc/codecs/pcm3168a.c @@ -306,6 +306,13 @@ static int pcm3168a_set_dai_sysclk(struct snd_soc_dai *dai, struct pcm3168a_priv *pcm3168a = snd_soc_component_get_drvdata(dai->component); int ret; + /* + * Some sound card sets 0 Hz as reset, + * but it is impossible to set. Ignore it here + */ + if (freq == 0) + return 0; + if (freq > PCM3168A_MAX_SYSCLK) return -EINVAL; -- 2.25.1

1 0

[PATCH 1/2] ASoC: rt700: wait for the delayed work to finish when the system suspends
by shumingf＠realtek.com 21 Sep '20

21 Sep '20

From: Shuming Fan <shumingf(a)realtek.com> To avoid the IO error, we need to cancel the delayed work and wait for it to finish. Signed-off-by: Shuming Fan <shumingf(a)realtek.com> --- sound/soc/codecs/rt700-sdw.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/soc/codecs/rt700-sdw.c b/sound/soc/codecs/rt700-sdw.c index ead4918bbf90..c7deb4e4fcf1 100644 --- a/sound/soc/codecs/rt700-sdw.c +++ b/sound/soc/codecs/rt700-sdw.c @@ -490,6 +490,9 @@ static int __maybe_unused rt700_dev_suspend(struct device *dev) if (!rt700->hw_init) return 0; + cancel_delayed_work_sync(&rt700->jack_detect_work); + cancel_delayed_work_sync(&rt700->jack_btn_check_work); + regcache_cache_only(rt700->regmap, true); return 0; -- 2.28.0

2 1

[PATCH 2/2] ASoC: rt711: wait for the delayed work to finish when the system suspends
by shumingf＠realtek.com 21 Sep '20

21 Sep '20

From: Shuming Fan <shumingf(a)realtek.com> To avoid the IO error, we need to cancel the delayed work and wait for it to finish. Signed-off-by: Shuming Fan <shumingf(a)realtek.com> --- sound/soc/codecs/rt711-sdw.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/soc/codecs/rt711-sdw.c b/sound/soc/codecs/rt711-sdw.c index 28d663673320..3a8ca600d1cf 100644 --- a/sound/soc/codecs/rt711-sdw.c +++ b/sound/soc/codecs/rt711-sdw.c @@ -491,6 +491,10 @@ static int __maybe_unused rt711_dev_suspend(struct device *dev) if (!rt711->hw_init) return 0; + cancel_delayed_work_sync(&rt711->jack_detect_work); + cancel_delayed_work_sync(&rt711->jack_btn_check_work); + cancel_work_sync(&rt711->calibration_work); + regcache_cache_only(rt711->regmap, true); return 0; -- 2.28.0

2 1

[PATCH v5 00/13] ASoC: Intel: Catpt - Lynx and Wildcat point
by Cezary Rojewski 21 Sep '20

21 Sep '20

Implement support for Lynxpoint and Wildcat Point AudioDSP. Catpt solution deprecates existing sound/soc/intel/haswell which is removed in the following series. This cover-letter is followed by 'Developer's deep dive' message schedding light on catpt's key concepts and areas addressed. Due to high range of errors and desynchronization from recommendations set by Windows solution, re-write came as a lower-cost solution compared to refactoring /haswell/ with several series of patches. Series is dependent on linux-spi change: spi: pxa2xx: Add SSC2 and SSPSP2 SSP registers https://www.spinics.net/lists/linux-spi/msg23885.html which has been already merged and is now part of linux-spi tree. Special thanks go to Marcin Barlik and Piotr Papierkowski for sharing their LPT/WPT AudioDSP architecture expertise as well as helping backtrack its historical background. My thanks go to Amadeusz Slawinski for reviews and improvements proposed on and off the internal list. Most of internal diff below is his contribution. Krzysztof Hejmowski helped me setup my own Xtensa environment and recompile LPT/WPT FW binary sources what sped up the development greatly. This would not have been possible without help from these champions, especially considering how quickly the catpt was written: 2 weeks features, 3 weeks optimizations. Thank you. Userspace-exposed members are compatible with what is exposed by deprecated solution as well as FW binary being re-used thus no harm is done. The only visible differences are: the newly added 'Loopback Mute' kcontrol and volume support extending to quad from stereo. On top of fixing erros and design flows, catpt also adds module reload, dynamic SRAM memory allocation during PCM runtime and exposes missing userspace API: 'Loopback Mute' kcontrol, quad volume controls and sysfs fw-version entries. Event tracing is provided to easy solution debugging. Following are not included in this update and are scheduled as later addition: - fw logging - module (library) support Note: LPT power up/down sequences might get aligned with WPT once enough testing is done as capabilities are shared for both DSPs. Note #2: Both LPT and WPT power up/down sequences may get optimized in future updates as thanks to help from the Windows team, most of nuances behind why/what/when in regard to hw registers have been backtracked and reviewed again. Link to developer's deep dive message: https://www.spinics.net/lists/alsa-devel/msg113563.html Changes in v5: Basically everything below is result of Andy's review. Thank you Andy for taking time into this detailed review - catpt now makes use of common linux/pxa2xx_ssp.h header file, removing redundant SSP register declarations in the process. As stated in the opening, this is dependent upon linux-spi change: spi: pxa2xx: Add SSC2 and SSPSP2 SSP registers - updated Kconfig by removing DMADEVICES and adding COMPILE_TEST as optional depends-on - updated all register macros definitions to be more safe against common arithmetics when specifying macro's parameters - removed CONFIG_PM and CONFIG_PM_SLEEP usage in favor of __maybe_unused - all 'if (ret < 0)' converted to simple 'if (ret)' whenever possible - fixed erroneous check for platform_device_register_data within catpt_register_board() - _SLAVE/_MASTER replaced with more inclusive _CONSUMER/_PROVIDER for enum catpt_ssp_mode - catpt_acpi_probe() is now making use of high-level wrappers for ioremapping and resource assignment, reducing function's code size - due to improved catpt_acpi_probe() behavior, catpt_acpi_remove() needs not to cast dma_free_coherent() any longer - DMA source and destrination maxburst now of value 16, see: https://www.spinics.net/lists/alsa-devel/msg114394.html - simplified catpt_dsp_update_lpclock() as list_for_each_entry() is empty-safe by default - dropped '_SSP_' from all names of all CATPT_SSP_SSXXX_DEFAULT macros - catpt_updatel_pci now makes use of linux/pci.h and uapi/linux/pci.h constants such as: PCI_PM_CTRL_STATE_MASK and PCI_D3hot Changes in v4: https://www.spinics.net/lists/alsa-devel/msg113762.html - fixed compilation with i386 kconfig (conflicting names) - streamlined naming for SHIM and PCI registers to match SSP ones (SHIM_REG -> SHIM) - catpt_component_probe removed and kcontrols again initializzed statically via snd_kcontrol_new array: this is to remove kctl->id.device shenanigans - renamed catpt_set_ctlvol to catpt_set_dspvol - function name wasn't matching its purpose Changes in v3: - fixed IRAM mask usage in lpt_dsp_power_up (dsp.c) - updated dbg message formatting in catpt_restore_fwimage as suggested by Andy - fixed alignment for struct catpt_ssp_device_format - catpt_set_ctlvol now verifies all-equal scenario based on all channels rather than just first two as requested by Amadeo - fixed SPDX for registers.h Changes in v2: https://www.spinics.net/lists/alsa-devel/msg113660.html - fixed SPDX formatting for all header files as well as pcm.c - fixed size provided to memcpy() in fw_build_read() as reported by Mark - renamed struct catpt_pdata to struct catpt_spec (cosmetic) - fixed erroneous path in catpt_load_block: region is properly released - trace.h events for updating registers have been removed and usages replaced by dev_dbg (SRAMPGE/ LPCS) - as requested by Andy, struct resource has replaced struct catpt_mbank and struct catpt_mregion. This change cascaded into: - catpt_mbank_size and catpt_mregion_size replaced by resource_size - catpt_mregion_intersects replaced by resource_overlaps - all catpt_mbank_ and catpt_mregion_ handlers found in loader.c (_request, _reserve, _release, _extract, _split, _join) have been removed - __request_region and __release_region have been enlisted in their place - catpt_mregion_intersecting renamed to catpt_resource_overlapping - catpt_request_region helper has been provided to deal with -size based requests o haven't found direct replacements in resource.c/ ioport.h for both functions - catpt_mbank_create and catpt_mbank_remove renamed to catpt_sram_init and catpt_sram_free respectively - catpt_sram_init now returns void instead of int and has been converted to simple initialized. This change ultimately cascaded into: o both SRAM banks initialization being moved to catpt_dev_init from catpt_acpi_probe (device.c) o catpt_dev::spec is now initialized first, with catpt_dev_init following it soon after o catpt_acpi_probe erroneous path has been simplified as SRAM banks no longer need to be freed - catpt_sram_free now frees all resources via child -> sibling enumeration rather than region_list iteration - catpt_dsp_update_srampge and catpt_dsp_set_srampge now accept new argument: unsigned long mask. Caused by removal of catpt_mbank - mask is taken directly from catpt_dev::spec::d/iram_mask - trace.h events for catpt_mbank and catpt_mregion have been removed Diff against last drop on internal list: https://www.spinics.net/lists/alsa-devel/msg113549.html - replaced spinlock with mutex for mregion allocation and release to address sleeping in atomic context warnings - fixed coredump fw_hash dumping - kcontrol values are now always stored regardless of stream of interest is running or not - kcontrol values are now applied after stream is prepared instead of ignoring what has been set by user initially - catpt_pdata instances have been renamed from hsw_ and bdw_ to lpt_ and wpt_ respectively - reordered Makefile .o(s) (cosmetic) Cezary Rojewski (13): ASoC: Intel: Add catpt device ASoC: Intel: catpt: Define DSP operations ASoC: Intel: catpt: Firmware loading and context restore ASoC: Intel: catpt: Implement IPC protocol ASoC: Intel: catpt: Add IPC messages ASoC: Intel: catpt: PCM operations ASoC: Intel: catpt: Event tracing ASoC: Intel: catpt: Simple sysfs attributes ASoC: Intel: Select catpt and deprecate haswell ASoC: Intel: haswell: Remove haswell-solution specific code ASoC: Intel: broadwell: Remove haswell-solution specific code ASoC: Intel: bdw-5650: Remove haswell-solution specific code ASoC: Intel: bdw-5677: Remove haswell-solution specific code sound/soc/intel/Kconfig | 24 +- sound/soc/intel/Makefile | 2 +- sound/soc/intel/boards/Kconfig | 8 +- sound/soc/intel/boards/bdw-rt5650.c | 36 - sound/soc/intel/boards/bdw-rt5677.c | 33 - sound/soc/intel/boards/broadwell.c | 33 - sound/soc/intel/boards/haswell.c | 28 +- sound/soc/intel/catpt/Makefile | 6 + sound/soc/intel/catpt/core.h | 187 +++++ sound/soc/intel/catpt/device.c | 354 ++++++++ sound/soc/intel/catpt/dsp.c | 572 +++++++++++++ sound/soc/intel/catpt/fs.c | 79 ++ sound/soc/intel/catpt/ipc.c | 298 +++++++ sound/soc/intel/catpt/loader.c | 673 +++++++++++++++ sound/soc/intel/catpt/messages.c | 313 +++++++ sound/soc/intel/catpt/messages.h | 401 +++++++++ sound/soc/intel/catpt/pcm.c | 1212 +++++++++++++++++++++++++++ sound/soc/intel/catpt/registers.h | 178 ++++ sound/soc/intel/catpt/trace.h | 83 ++ 19 files changed, 4377 insertions(+), 143 deletions(-) create mode 100644 sound/soc/intel/catpt/Makefile create mode 100644 sound/soc/intel/catpt/core.h create mode 100644 sound/soc/intel/catpt/device.c create mode 100644 sound/soc/intel/catpt/dsp.c create mode 100644 sound/soc/intel/catpt/fs.c create mode 100644 sound/soc/intel/catpt/ipc.c create mode 100644 sound/soc/intel/catpt/loader.c create mode 100644 sound/soc/intel/catpt/messages.c create mode 100644 sound/soc/intel/catpt/messages.h create mode 100644 sound/soc/intel/catpt/pcm.c create mode 100644 sound/soc/intel/catpt/registers.h create mode 100644 sound/soc/intel/catpt/trace.h -- 2.17.1

4 30

[PATCH] Revert "ALSA: hda - Fix silent audio output and corrupted input on MSI X570-A PRO"
by Takashi Iwai 21 Sep '20

21 Sep '20

This reverts commit 15cbff3fbbc6 ("ALSA: hda - Fix silent audio output and corrupted input on MSI X570-A PRO"). A regression reported by a Fedora user for MSI X570-A PRO mobo. Until the correct solution is found out, let's revert the quirk as a quick workaround. Fixes: 15cbff3fbbc6 ("ALSA: hda - Fix silent audio output and corrupted input on MSI X570-A PRO") Reported-by: Hans de Goede <hdegoede(a)redhat.com> Cc: <stable(a)vger.kernel.org> Cc: Dan Crawford <dnlcrwfrd(a)gmail.com> BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1879277 Link: https://lore.kernel.org/r/7efd2fe5-bf38-7f85-891a-eee3845d1493@redhat.com Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/pci/hda/patch_realtek.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index c4d615cf8de1..d4f17b465892 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -2475,7 +2475,6 @@ static const struct snd_pci_quirk alc882_fixup_tbl[] = { SND_PCI_QUIRK(0x1462, 0x1276, "MSI-GL73", ALC1220_FIXUP_CLEVO_P950), SND_PCI_QUIRK(0x1462, 0x1293, "MSI-GP65", ALC1220_FIXUP_CLEVO_P950), SND_PCI_QUIRK(0x1462, 0x7350, "MSI-7350", ALC889_FIXUP_CD), - SND_PCI_QUIRK(0x1462, 0x9c37, "MSI X570-A PRO", ALC1220_FIXUP_CLEVO_P950), SND_PCI_QUIRK(0x1462, 0xda57, "MSI Z270-Gaming", ALC1220_FIXUP_GB_DUAL_CODECS), SND_PCI_QUIRK_VENDOR(0x1462, "MSI", ALC882_FIXUP_GPIO3), SND_PCI_QUIRK(0x147b, 0x107a, "Abit AW9D-MAX", ALC882_FIXUP_ABIT_AW9D_MAX), -- 2.16.4

1 0

[PATCH v2 1/1] ALSA: hda: Refactor calculating SDnFMT according to specification
by Pawel Harlozinski 21 Sep '20

21 Sep '20

Fix setting SDnFMT based on High Definition Audio Specification Rev. 1.0a page 48. Bits per Sample (BITS): 000 = 8 bits. The data will be packed in memory in 8-bit containers on 16-bit boundaries. 001 = 16 bits. The data will be packed in memory in 16-bit containers on 16-bit boundaries. 010 = 20 bits. The data will be packed in memory in 32-bit containers on 32-bit boundaries. 011 = 24 bits. The data will be packed in memory in 32-bit containers on 32-bit boundaries. 100 = 32 bits. The data will be packed in memory in 32-bit containers on 32-bit boundaries. 101-111 = Reserved Set SDnFMT depending on which format was given. Henceforth split cases for formats 20, 24, 32 bits, but leave constraints to maxbps. Change-Id: I97771b16da14e85b7f35372f5dfc87bb13bb5ce0 Signed-off-by: Pawel Harlozinski <pawel.harlozinski(a)linux.intel.com> --- sound/hda/hdac_device.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/hda/hdac_device.c b/sound/hda/hdac_device.c index 3e9e9ac804f6..ccc47a10ba63 100644 --- a/sound/hda/hdac_device.c +++ b/sound/hda/hdac_device.c @@ -764,7 +764,14 @@ unsigned int snd_hdac_calc_stream_format(unsigned int rate, val |= AC_FMT_BITS_16; break; case 20: + val |= AC_FMT_BITS_20; + break; case 24: + if (maxbps >= 24) + val |= AC_FMT_BITS_24; + else + val |= AC_FMT_BITS_20; + break; case 32: if (maxbps >= 32 || format == SNDRV_PCM_FORMAT_FLOAT_LE) val |= AC_FMT_BITS_32; -- 2.17.1

3 2

PROBLEM: A page fault occurs when the sound driver is loaded (ThinkPad X13/T14)
by Philipp Leskovitz 21 Sep '20

21 Sep '20

[1.] One line summary of the problem: A page fault occurs when the sound driver is loaded. [2.] Full description of the problem/report: A page fault occurs when the sound driver for Intel Commet-Lake platform is loaded. This happens e.g. on Lenovo ThinkPad X13 and T14 at startup and version 1.4.3 of intel-sof-firmware binaries (https://github.com/thesofproject/sof-bin/tree/stable-v1.4.3). Same result with version 1.5.1. [3.] Keywords (i.e., modules, networking, kernel): [4.] Kernel information [4.1.] Kernel version (from /proc/version): >5.9-rc5 commit-id: fc4f28bb3daf3265d6bc5f73b497306985bb23ab [4.2.] Kernel .config file: See attachment for full configuration, the important part is: ... CONFIG_SND_SOC=y CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y CONFIG_SND_SOC_INTEL_CML_LP=y CONFIG_SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC=y CONFIG_SND_SOC_INTEL_MACH=y CONFIG_SND_SOC_INTEL_SKL_HDA_DSP_GENERIC_MACH=y CONFIG_SND_SOC_SOF_TOPLEVEL=y CONFIG_SND_SOC_SOF_PCI=y CONFIG_SND_SOC_SOF_INTEL_TOPLEVEL=y CONFIG_SND_SOC_SOF_COMETLAKE_LP_SUPPORT=y CONFIG_SND_SOC_SOF_HDA_LINK=y CONFIG_SND_SOC_SOF_HDA_AUDIO_CODEC=y CONFIG_SND_SOC_SOF_HDA_ALWAYS_ENABLE_DMI_L1=y ... [5.] Most recent kernel version which did not have the bug: - Ubuntu 20.04.1 works fine (5.4.0-45) - Kernel 5.4.61 with some backports from 5.7 [6.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/admin-guide/oops-tracing.rst) See attachment for full log. ... [ 6.380009] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 6.380536] snd_hda_intel 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver [ 6.381915] usbcore: registered new interface driver snd-usb-audio [ 6.382525] sof-audio-pci 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 6.383090] sof-audio-pci 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver [ 6.386039] sof-audio-pci 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040380 [ 6.386862] usb 1-1: New USB device found, idVendor=058f, idProduct=9540, bcdDevice= 1.20 [ 6.386959] IPv4 over IPsec tunneling driver [ 6.387207] sof-audio-pci 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops) [ 6.387747] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.389474] usb 1-1: Product: EMV Smartcard Reader [ 6.390069] usb 1-1: Manufacturer: Generic [ 6.390892] Initializing XFRM netlink socket [ 6.392858] NET: Registered protocol family 10 [ 6.395179] sof-audio-pci 0000:00:1f.3: use msi interrupt mode [ 6.396219] Segment Routing with IPv6 [ 6.399097] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 6.402236] NET: Registered protocol family 17 [ 6.405170] NET: Registered protocol family 15 [ 6.406068] 9pnet: Installing 9P2000 support [ 6.408354] microcode: sig=0x806ec, pf=0x4, revision=0xd6 [ 6.409081] microcode: Microcode Update Driver: v2.2. [ 6.409083] IPI shorthand broadcast: enabled [ 6.410374] sched_clock: Marking stable (6404500108, 5227507)->(6418014859, -8287244) [ 6.411127] Loading compiled-in X.509 certificates [ 6.412635] HDMI HDA Codec ehdaudio0D2: Max dais supported: 3 [ 6.413502] sof-audio-pci 0000:00:1f.3: hda codecs found, mask 5 [ 6.414129] sof-audio-pci 0000:00:1f.3: using HDA machine driver skl_hda_dsp_generic now [ 6.414714] sof-audio-pci 0000:00:1f.3: DMICs detected in NHLT tables: 2 [ 6.416290] Loaded X.509 cert 'Build time autogenerated kernel key: b521b2c060c3f56dd5ab1fbfb34c05c2916a8c0c' [ 6.416931] pstore: Using crash dump compression: deflate [ 6.423238] PM: Magic number: 4:125:733 [ 6.423900] hwmon hwmon0: hash matches [ 6.424597] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.429162] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.434042] ALSA device list: [ 6.434894] No soundcards found. [ 6.439211] Freeing unused kernel image (initmem) memory: 1572K [ 6.445948] Write protecting the kernel read-only data: 24576k [ 6.448072] Freeing unused kernel image (text/rodata gap) memory: 2044K [ 6.448904] Freeing unused kernel image (rodata/data gap) memory: 368K [ 6.449569] Run /init as init process [ 6.450203] with arguments: [ 6.450203] /init [ 6.450204] with environment: [ 6.450204] HOME=/ [ 6.450204] TERM=linux [ 6.450205] BOOT_IMAGE=/isolinux/bzImage [ 6.450205] intel_iommu=on,igfx_off [ 6.487322] usb 2-4: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 6.501610] usb 2-4: New USB device found, idVendor=0781, idProduct=5580, bcdDevice= 0.10 [ 6.502354] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.503080] usb 2-4: Product: Extreme [ 6.503794] usb 2-4: Manufacturer: SanDisk [ 6.504502] usb 2-4: SerialNumber: AA010121131224373982 [ 6.519956] sof-audio-pci 0000:00:1f.3: Firmware info: version 1:4:3-76052 [ 6.520648] sof-audio-pci 0000:00:1f.3: Firmware: ABI 3:11:0 Kernel ABI 3:16:0 [ 6.521724] sof-audio-pci 0000:00:1f.3: Topology: ABI 3:11:0 Kernel ABI 3:16:0 [ 6.522393] sof-audio-pci 0000:00:1f.3: warning: widget type 7 name iDisp3 Tx not handled [ 6.524941] sof-audio-pci 0000:00:1f.3: warning: widget type 0 name codec0_in not handled [ 6.528203] sof-audio-pci 0000:00:1f.3: warning: widget type 7 name iDisp2 Tx not handled [ 6.533912] sof-audio-pci 0000:00:1f.3: warning: widget type 0 name codec1_in not handled [ 6.534597] sof-audio-pci 0000:00:1f.3: warning: widget type 7 name iDisp1 Tx not handled [ 6.540491] sof-audio-pci 0000:00:1f.3: warning: widget type 1 name codec0_out not handled [ 6.541826] sof-audio-pci 0000:00:1f.3: warning: widget type 7 name Analog CPU Playback not handled [ 6.546622] sof-audio-pci 0000:00:1f.3: warning: widget type 1 name codec1_out not handled [ 6.547556] sof-audio-pci 0000:00:1f.3: warning: widget type 7 name Digital CPU Playback not handled [ 6.548221] sof-audio-pci 0000:00:1f.3: warning: widget type 0 name codec2_in not handled [ 6.548852] sof-audio-pci 0000:00:1f.3: warning: widget type 7 name Alt Analog CPU Playback not handled [ 6.549510] sof-audio-pci 0000:00:1f.3: warning: widget type 1 name codec2_out not handled [ 6.550316] sof-audio-pci 0000:00:1f.3: warning: widget type 0 name Analog CPU Capture not handled [ 6.551743] sof-audio-pci 0000:00:1f.3: warning: widget type 1 name iDisp1_out not handled [ 6.552380] sof-audio-pci 0000:00:1f.3: warning: widget type 0 name Digital CPU Capture not handled [ 6.554251] sof-audio-pci 0000:00:1f.3: warning: widget type 1 name iDisp2_out not handled [ 6.554853] sof-audio-pci 0000:00:1f.3: warning: widget type 0 name Alt Analog CPU Capture not handled [ 6.557362] sof-audio-pci 0000:00:1f.3: warning: widget type 1 name iDisp3_out not handled [ 6.578044] sof-audio-pci 0000:00:1f.3: ASoC: Parent card not yet available, widget card binding deferred [ 6.583577] HDMI HDA Codec ehdaudio0D2: hdac_hdmi_present_sense: disconnect for pin:port 5:0 [ 6.584601] HDMI HDA Codec ehdaudio0D2: hdac_hdmi_present_sense: disconnect for pin:port 6:0 [ 6.585451] HDMI HDA Codec ehdaudio0D2: hdac_hdmi_present_sense: disconnect for pin:port 7:0 [ 6.605984] snd_hda_codec_realtek ehdaudio0D0: autoconfig for ALC257: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 6.607282] snd_hda_codec_realtek ehdaudio0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 6.608474] snd_hda_codec_realtek ehdaudio0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 6.611586] snd_hda_codec_realtek ehdaudio0D0: mono: mono_out=0x0 [ 6.612904] snd_hda_codec_realtek ehdaudio0D0: inputs: [ 6.615225] snd_hda_codec_realtek ehdaudio0D0: Mic=0x19 [ 6.615902] usb 1-8: new high-speed USB device number 3 using xhci_hcd [ 6.667538] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi3 overwritten [ 6.668264] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi2 overwritten [ 6.668918] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi1 overwritten [ 6.669698] BUG: unable to handle page fault for address: ffffffffffffffe0 [ 6.670415] #PF: supervisor write access in kernel mode [ 6.670993] #PF: error_code(0x0002) - not-present page [ 6.671558] PGD 34180d067 P4D 34180d067 PUD 34180f067 PMD 0 [ 6.672142] Oops: 0002 [#1] SMP NOPTI [ 6.672675] CPU: 2 PID: 126 Comm: kworker/2:2 Not tainted 5.9.0-devel+ #2 [ 6.673225] Hardware name: LENOVO 20S1S19N00/20S1S19N00, BIOS N2XET16W (1.06 ) 05/13/2020 [ 6.673844] Workqueue: events sof_probe_work [ 6.674387] RIP: 0010:hda_dsp_hdmi_build_controls+0x5b/0xff [ 6.674942] Code: 48 8d 98 20 ff ff ff 49 39 c4 74 4c 45 31 ff 49 c7 c6 e0 1a 36 a2 44 89 fe 48 89 ef e8 1e ff ff ff 48 85 c0 0f 84 be 00 00 00 <48> 89 83 c0 00 00 00 44 8b 48 18 44 89 8b bc 00 00 00 0f 1f 44 00 [ 6.675525] RSP: 0000:ffff9e93038e7b08 EFLAGS: 00010286 [ 6.676113] RAX: ffff8ef56180f000 RBX: ffffffffffffff20 RCX: 0000000000000004 [ 6.676705] RDX: 0000000000000004 RSI: ffffffffa26e729f RDI: ffff8ef56180f02d [ 6.677291] RBP: ffffffffa291a240 R08: 0000000000000049 R09: 0000000000000000 [ 6.677889] R10: ffff8ef5635ef024 R11: ffff9e93207d8220 R12: ffff8ef56231dc68 [ 6.678481] R13: ffff8ef56231d828 R14: ffffffffa2361ae0 R15: 0000000000000000 [ 6.679064] FS: 0000000000000000(0000) GS:ffff8ef56f680000(0000) knlGS:0000000000000000 [ 6.679667] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.680322] CR2: ffffffffffffffe0 CR3: 0000000820c24003 CR4: 00000000003706e0 [ 6.680968] Call Trace: [ 6.681583] skl_hda_hdmi_jack_init+0x119/0x12b [ 6.682227] ? snprintf+0x49/0x60 [ 6.682844] snd_soc_card_late_probe+0x1e/0x70 [ 6.683461] snd_soc_bind_card+0x83f/0x960 [ 6.684075] devm_snd_soc_register_card+0x43/0x80 [ 6.684676] skl_hda_audio_probe+0x142/0x2e0 [ 6.685265] platform_drv_probe+0x35/0x80 [ 6.685851] really_probe+0x31b/0x430 [ 6.686428] ? driver_allows_async_probing+0x50/0x50 [ 6.687004] driver_probe_device+0xde/0x150 [ 6.687581] ? driver_allows_async_probing+0x50/0x50 [ 6.688162] bus_for_each_drv+0x79/0xc0 [ 6.688736] __device_attach+0xe0/0x160 [ 6.689310] bus_probe_device+0x87/0xa0 [ 6.689885] device_add+0x436/0x810 [ 6.690458] ? _cond_resched+0x15/0x30 [ 6.691032] platform_device_add+0x110/0x240 [ 6.691611] platform_device_register_full+0xc7/0x120 [ 6.692191] sof_machine_register+0x60/0xc0 [ 6.692777] sof_probe_work+0x11c/0x230 [ 6.693357] process_one_work+0x205/0x3d0 [ 6.693938] ? process_one_work+0x3d0/0x3d0 [ 6.694515] worker_thread+0x2d/0x3c0 [ 6.695090] ? process_one_work+0x3d0/0x3d0 [ 6.695664] kthread+0x116/0x130 [ 6.696235] ? kthread_park+0x80/0x80 [ 6.696804] ret_from_fork+0x1f/0x30 [ 6.697372] Modules linked in: [ 6.697936] CR2: ffffffffffffffe0 [7.] A small shell script or example program which triggers the problem (if possible) [8.] Environment [8.1.] Software (add the output of the ver_linux script here) [8.2.] Processor information (from /proc/cpuinfo): [8.3.] Module information (from /proc/modules): [8.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem) [8.5.] PCI information ('lspci -vvv' as root) [8.6.] SCSI information (from /proc/scsi/scsi) [8.7.] Other information that might be relevant to the problem (please look in /proc and include all information that you think to be relevant): [X.] Other notes, patches, fixes, workarounds:

2 1

[PATCH] ALSA: usb-audio: Add delay quirk for H570e USB headsets
by Joakim Tjernlund 21 Sep '20

21 Sep '20

Needs the same delay as H650e Signed-off-by: Joakim Tjernlund <joakim.tjernlund(a)infinera.com> Cc: stable(a)vger.kernel.org --- sound/usb/quirks.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 75bbdc691243..892296df131d 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1678,12 +1678,13 @@ void snd_usb_ctl_msg_quirk(struct usb_device *dev, unsigned int pipe, && (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS) msleep(20); - /* Zoom R16/24, Logitech H650e, Jabra 550a, Kingston HyperX needs a tiny - * delay here, otherwise requests like get/set frequency return as - * failed despite actually succeeding. + /* Zoom R16/24, Logitech H650e/H570e, Jabra 550a, Kingston HyperX + * needs a tiny delay here, otherwise requests like get/set + * frequency return as failed despite actually succeeding. */ if ((chip->usb_id == USB_ID(0x1686, 0x00dd) || chip->usb_id == USB_ID(0x046d, 0x0a46) || + chip->usb_id == USB_ID(0x046d, 0x0a56) || chip->usb_id == USB_ID(0x0b0e, 0x0349) || chip->usb_id == USB_ID(0x0951, 0x16ad)) && (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS) -- 2.26.2

3 4

[PATCH] ALSA: compat_ioctl: avoid compat_alloc_user_space
by Arnd Bergmann 21 Sep '20

21 Sep '20

Using compat_alloc_user_space() tends to add complexity to the ioctl handling, so I am trying to remove it everywhere. The two callers in sound/core can rewritten to just call the same code that operates on a kernel pointer as the native handler. Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> --- sound/core/control.c | 38 ++++++++++++++++++++++++------------- sound/core/control_compat.c | 14 ++++++-------- sound/core/hwdep.c | 27 ++++++++++++++++---------- sound/core/hwdep_compat.c | 23 +++++++--------------- 4 files changed, 55 insertions(+), 47 deletions(-) diff --git a/sound/core/control.c b/sound/core/control.c index aa0c0cf182af..e014598142df 100644 --- a/sound/core/control.c +++ b/sound/core/control.c @@ -717,22 +717,19 @@ static int snd_ctl_card_info(struct snd_card *card, struct snd_ctl_file * ctl, } static int snd_ctl_elem_list(struct snd_card *card, - struct snd_ctl_elem_list __user *_list) + struct snd_ctl_elem_list *list) { - struct snd_ctl_elem_list list; struct snd_kcontrol *kctl; struct snd_ctl_elem_id id; unsigned int offset, space, jidx; int err = 0; - if (copy_from_user(&list, _list, sizeof(list))) - return -EFAULT; - offset = list.offset; - space = list.space; + offset = list->offset; + space = list->space; down_read(&card->controls_rwsem); - list.count = card->controls_count; - list.used = 0; + list->count = card->controls_count; + list->used = 0; if (space > 0) { list_for_each_entry(kctl, &card->controls, list) { if (offset >= kctl->count) { @@ -741,12 +738,12 @@ static int snd_ctl_elem_list(struct snd_card *card, } for (jidx = offset; jidx < kctl->count; jidx++) { snd_ctl_build_ioff(&id, kctl, jidx); - if (copy_to_user(list.pids + list.used, &id, + if (copy_to_user(list->pids + list->used, &id, sizeof(id))) { err = -EFAULT; goto out; } - list.used++; + list->used++; if (!--space) goto out; } @@ -755,11 +752,26 @@ static int snd_ctl_elem_list(struct snd_card *card, } out: up_read(&card->controls_rwsem); - if (!err && copy_to_user(_list, &list, sizeof(list))) - err = -EFAULT; return err; } +static int snd_ctl_elem_list_user(struct snd_card *card, + struct snd_ctl_elem_list __user *_list) +{ + struct snd_ctl_elem_list list; + int err; + + if (copy_from_user(&list, _list, sizeof(list))) + return -EFAULT; + err = snd_ctl_elem_list(card, &list); + if (err) + return err; + if (copy_to_user(_list, &list, sizeof(list))) + return -EFAULT; + + return 0; +} + /* Check whether the given kctl info is valid */ static int snd_ctl_check_elem_info(struct snd_card *card, const struct snd_ctl_elem_info *info) @@ -1703,7 +1715,7 @@ static long snd_ctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg case SNDRV_CTL_IOCTL_CARD_INFO: return snd_ctl_card_info(card, ctl, cmd, argp); case SNDRV_CTL_IOCTL_ELEM_LIST: - return snd_ctl_elem_list(card, argp); + return snd_ctl_elem_list_user(card, argp); case SNDRV_CTL_IOCTL_ELEM_INFO: return snd_ctl_elem_info_user(ctl, argp); case SNDRV_CTL_IOCTL_ELEM_READ: diff --git a/sound/core/control_compat.c b/sound/core/control_compat.c index 02df1d7db9a1..1d708aab9c98 100644 --- a/sound/core/control_compat.c +++ b/sound/core/control_compat.c @@ -22,24 +22,22 @@ struct snd_ctl_elem_list32 { static int snd_ctl_elem_list_compat(struct snd_card *card, struct snd_ctl_elem_list32 __user *data32) { - struct snd_ctl_elem_list __user *data; + struct snd_ctl_elem_list data = {}; compat_caddr_t ptr; int err; - data = compat_alloc_user_space(sizeof(*data)); - /* offset, space, used, count */ - if (copy_in_user(data, data32, 4 * sizeof(u32))) + if (copy_from_user(&data, data32, 4 * sizeof(u32))) return -EFAULT; /* pids */ - if (get_user(ptr, &data32->pids) || - put_user(compat_ptr(ptr), &data->pids)) + if (get_user(ptr, &data32->pids)) return -EFAULT; - err = snd_ctl_elem_list(card, data); + data.pids = compat_ptr(ptr); + err = snd_ctl_elem_list(card, &data); if (err < 0) return err; /* copy the result */ - if (copy_in_user(data32, data, 4 * sizeof(u32))) + if (copy_to_user(data32, &data, 4 * sizeof(u32))) return -EFAULT; return 0; } diff --git a/sound/core/hwdep.c b/sound/core/hwdep.c index 21edb8ac95eb..0c029892880a 100644 --- a/sound/core/hwdep.c +++ b/sound/core/hwdep.c @@ -203,28 +203,35 @@ static int snd_hwdep_dsp_status(struct snd_hwdep *hw, } static int snd_hwdep_dsp_load(struct snd_hwdep *hw, - struct snd_hwdep_dsp_image __user *_info) + struct snd_hwdep_dsp_image *info) { - struct snd_hwdep_dsp_image info; int err; if (! hw->ops.dsp_load) return -ENXIO; - memset(&info, 0, sizeof(info)); - if (copy_from_user(&info, _info, sizeof(info))) - return -EFAULT; - if (info.index >= 32) + if (info->index >= 32) return -EINVAL; /* check whether the dsp was already loaded */ - if (hw->dsp_loaded & (1u << info.index)) + if (hw->dsp_loaded & (1u << info->index)) return -EBUSY; - err = hw->ops.dsp_load(hw, &info); + err = hw->ops.dsp_load(hw, info); if (err < 0) return err; - hw->dsp_loaded |= (1u << info.index); + hw->dsp_loaded |= (1u << info->index); return 0; } +static int snd_hwdep_dsp_load_user(struct snd_hwdep *hw, + struct snd_hwdep_dsp_image __user *_info) +{ + struct snd_hwdep_dsp_image info = {}; + + if (copy_from_user(&info, _info, sizeof(info))) + return -EFAULT; + return snd_hwdep_dsp_load(hw, &info); +} + + static long snd_hwdep_ioctl(struct file * file, unsigned int cmd, unsigned long arg) { @@ -238,7 +245,7 @@ static long snd_hwdep_ioctl(struct file * file, unsigned int cmd, case SNDRV_HWDEP_IOCTL_DSP_STATUS: return snd_hwdep_dsp_status(hw, argp); case SNDRV_HWDEP_IOCTL_DSP_LOAD: - return snd_hwdep_dsp_load(hw, argp); + return snd_hwdep_dsp_load_user(hw, argp); } if (hw->ops.ioctl) return hw->ops.ioctl(hw, file, cmd, arg); diff --git a/sound/core/hwdep_compat.c b/sound/core/hwdep_compat.c index bc81db9cb3d4..a0b76706c083 100644 --- a/sound/core/hwdep_compat.c +++ b/sound/core/hwdep_compat.c @@ -19,26 +19,17 @@ struct snd_hwdep_dsp_image32 { static int snd_hwdep_dsp_load_compat(struct snd_hwdep *hw, struct snd_hwdep_dsp_image32 __user *src) { - struct snd_hwdep_dsp_image __user *dst; + struct snd_hwdep_dsp_image info = {}; compat_caddr_t ptr; - u32 val; - dst = compat_alloc_user_space(sizeof(*dst)); - - /* index and name */ - if (copy_in_user(dst, src, 4 + 64)) - return -EFAULT; - if (get_user(ptr, &src->image) || - put_user(compat_ptr(ptr), &dst->image)) - return -EFAULT; - if (get_user(val, &src->length) || - put_user(val, &dst->length)) - return -EFAULT; - if (get_user(val, &src->driver_data) || - put_user(val, &dst->driver_data)) + if (copy_from_user(&info, src, 4 + 64) || + get_user(ptr, &src->image) || + get_user(info.length, &src->length) || + get_user(info.driver_data, &src->driver_data)) return -EFAULT; + info.image = compat_ptr(ptr); - return snd_hwdep_dsp_load(hw, dst); + return snd_hwdep_dsp_load(hw, &info); } enum { -- 2.27.0

2 1

[PATCH] sound/pci/asihpi: fix spellint typo in comments
by Wang Qing 21 Sep '20

21 Sep '20

Change the comment typo: "ununsed" -> "unused". Signed-off-by: Wang Qing <wangqing(a)vivo.com> --- sound/pci/asihpi/hpios.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/asihpi/hpios.h b/sound/pci/asihpi/hpios.h index 26f7cf4..9e551bc --- a/sound/pci/asihpi/hpios.h +++ b/sound/pci/asihpi/hpios.h @@ -67,7 +67,7 @@ struct hpi_ioctl_linux { }; /* Conflict?: H is already used by a number of drivers hid, bluetooth hci, - and some sound drivers sb16, hdsp, emu10k. AFAIK 0xFC is ununsed command + and some sound drivers sb16, hdsp, emu10k. AFAIK 0xFC is unused command */ #define HPI_IOCTL_LINUX _IOWR('H', 0xFC, struct hpi_ioctl_linux) -- 2.7.4

2 1

[PATCH] ALSA: hda/realtek: Enable front panel headset LED on Lenovo ThinkStation P520
by Kai-Heng Feng 21 Sep '20

21 Sep '20

On Lenovo P520, the front panel headset LED isn't lit up right now. Realtek states that the LED needs to be enabled by ALC233's GPIO2, so let's do it accordingly to light the LED up. Signed-off-by: Kai-Heng Feng <kai.heng.feng(a)canonical.com> --- sound/pci/hda/patch_realtek.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index c521a1f17096..ba941bd0b792 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6017,6 +6017,7 @@ static void alc_fixup_thinkpad_acpi(struct hda_codec *codec, #include "hp_x360_helper.c" enum { + ALC269_FIXUP_GPIO2, ALC269_FIXUP_SONY_VAIO, ALC275_FIXUP_SONY_VAIO_GPIO2, ALC269_FIXUP_DELL_M101Z, @@ -6194,6 +6195,10 @@ enum { }; static const struct hda_fixup alc269_fixups[] = { + [ALC269_FIXUP_GPIO2] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc_fixup_gpio2, + }, [ALC269_FIXUP_SONY_VAIO] = { .type = HDA_FIXUP_PINCTLS, .v.pins = (const struct hda_pintbl[]) { @@ -7013,6 +7018,8 @@ static const struct hda_fixup alc269_fixups[] = { [ALC233_FIXUP_LENOVO_MULTI_CODECS] = { .type = HDA_FIXUP_FUNC, .v.func = alc233_alc662_fixup_lenovo_dual_codecs, + .chained = true, + .chain_id = ALC269_FIXUP_GPIO2 }, [ALC233_FIXUP_ACER_HEADSET_MIC] = { .type = HDA_FIXUP_VERBS, -- 2.17.1

3 5

[PATCH] ALSA: hda/realtek - Couldn't detect Mic if booting with headset plugged
by Hui Wang 21 Sep '20

21 Sep '20

We found a Mic detection issue on many Lenovo laptops, those laptops belong to differnt models and they have different audio design like internal mic connects to the codec or PCH, they all have this problem, the problem is if plugging a headset before powerup/reboot the machine, after booting up, the headphone could be detected but Mic couldn't. If we plug out and plug in the headset, both headphone and Mic could be detected then. Through debugging we found the codec on those laptops are same, it is alc257, and if we don't disable the 3k pulldown in alc256_shutup(), the issue will be fixed. So far there is no pop noise or power consumption regression on those laptops after this change. Cc: Kailang Yang <kailang(a)realtek.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Hui Wang <hui.wang(a)canonical.com> --- sound/pci/hda/patch_realtek.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 85e207173f5d..b6dc47da1d7b 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3428,7 +3428,11 @@ static void alc256_shutup(struct hda_codec *codec) /* 3k pull low control for Headset jack. */ /* NOTE: call this before clearing the pin, otherwise codec stalls */ - alc_update_coef_idx(codec, 0x46, 0, 3 << 12); + /* If disable 3k pulldown control for alc257, the Mic detection will not work correctly + * when booting with headset plugged. So skip setting it for the codec alc257 + */ + if (codec->core.vendor_id != 0x10ec0257) + alc_update_coef_idx(codec, 0x46, 0, 3 << 12); if (!spec->no_shutup_pins) snd_hda_codec_write(codec, hp_pin, 0, -- 2.17.1

3 2

[PATCH] ALSA: asihpi: fix iounmap in error handler
by trix＠redhat.com 21 Sep '20

21 Sep '20

From: Tom Rix <trix(a)redhat.com> clang static analysis flags this problem hpioctl.c:513:7: warning: Branch condition evaluates to a garbage value if (pci.ap_mem_base[idx]) { ^~~~~~~~~~~~~~~~~~~~ If there is a failure in the middle of the memory space loop, only some of the memory spaces need to be cleaned up. At the error handler, idx holds the number of successful memory spaces mapped. So rework the handler loop to use the old idx. There is a second problem, the memory space loop conditionally iomaps()/sets the mem_base so it is necessay to initize pci. Fixes: 719f82d3987a ("ALSA: Add support of AudioScience ASI boards") Signed-off-by: Tom Rix <trix(a)redhat.com> --- sound/pci/asihpi/hpioctl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/pci/asihpi/hpioctl.c b/sound/pci/asihpi/hpioctl.c index 6cc2b6964bb5..bb31b7fe867d 100644 --- a/sound/pci/asihpi/hpioctl.c +++ b/sound/pci/asihpi/hpioctl.c @@ -352,7 +352,7 @@ int asihpi_adapter_probe(struct pci_dev *pci_dev, struct hpi_message hm; struct hpi_response hr; struct hpi_adapter adapter; - struct hpi_pci pci; + struct hpi_pci pci = { 0 }; memset(&adapter, 0, sizeof(adapter)); @@ -509,7 +509,7 @@ int asihpi_adapter_probe(struct pci_dev *pci_dev, return 0; err: - for (idx = 0; idx < HPI_MAX_ADAPTER_MEM_SPACES; idx++) { + while (--idx >= 0) { if (pci.ap_mem_base[idx]) { iounmap(pci.ap_mem_base[idx]); pci.ap_mem_base[idx] = NULL; -- 2.18.1

2 1

[PATCH v3 00/19] Add Allwinner H3/H5/H6/A64 HDMI audio
by Clément Péron 21 Sep '20

21 Sep '20

Hi, New test done by Maxime using TDM show that's LRCK is indeed inverted so I drop the patch reverted in v2. And HDMI requires an inverted LRCK so let's readd the frame-inversion in the device-tree. I have also added a patch to change set_chan_cfg. Please note that I can't test TDM and only have a Allwinner H6. So test and comment on other Allwinner chips are welcome! Regards, Clement Change since v2: - rebase on next-20200918 - drop revert LRCK polarity patch - readd simple-audio-card,frame-inversion in dts - Add patch for changing set_chan_cfg params Change since v1: - rebase on next-20200828 - add revert LRCK polarity - remove all simple-audio-card,frame-inversion in dts - add Ondrej patches for Orange Pi board - Add arm64 defconfig patch Clément Péron (4): ASoC: sun4i-i2s: Change set_chan_cfg params ASoC: sun4i-i2s: Fix sun8i volatile regs arm64: dts: allwinner: h6: Enable HDMI sound for Beelink GS1 arm64: defconfig: Enable Allwinner i2s driver Jernej Skrabec (3): ASoC: sun4i-i2s: Add support for H6 I2S dt-bindings: ASoC: sun4i-i2s: Add H6 compatible arm64: dts: allwinner: h6: Add HDMI audio node Marcus Cooper (9): ASoC: sun4i-i2s: Set sign extend sample ASoc: sun4i-i2s: Add 20 and 24 bit support arm: dts: sunxi: h3/h5: Add DAI node for HDMI arm: dts: sunxi: h3/h5: Add HDMI audio arm64: dts: allwinner: a64: Add DAI node for HDMI arm64: dts: allwinner: a64: Add HDMI audio arm: sun8i: h3: Add HDMI audio to Orange Pi 2 arm: sun8i: h3: Add HDMI audio to Beelink X2 arm64: dts: allwinner: a64: Add HDMI audio to Pine64 Ondrej Jirman (3): arm64: dts: allwinner: Enable HDMI audio on Orange Pi PC 2 ARM: dts: sun8i-h3: Enable HDMI audio on Orange Pi PC/One arm64: dts: sun50i-h6-orangepi-3: Enable HDMI audio .../sound/allwinner,sun4i-a10-i2s.yaml | 2 + arch/arm/boot/dts/sun8i-h3-beelink-x2.dts | 8 + arch/arm/boot/dts/sun8i-h3-orangepi-2.dts | 8 + arch/arm/boot/dts/sun8i-h3-orangepi-one.dts | 8 + arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts | 8 + arch/arm/boot/dts/sunxi-h3-h5.dtsi | 33 +++ .../boot/dts/allwinner/sun50i-a64-pine64.dts | 8 + arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 34 +++ .../dts/allwinner/sun50i-h5-orangepi-pc2.dts | 8 + .../dts/allwinner/sun50i-h6-beelink-gs1.dts | 8 + .../dts/allwinner/sun50i-h6-orangepi-3.dts | 8 + arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 33 +++ arch/arm64/configs/defconfig | 1 + sound/soc/sunxi/sun4i-i2s.c | 280 ++++++++++++++++-- 14 files changed, 427 insertions(+), 20 deletions(-) -- 2.25.1

2 25

Re: [PATCH v3 3/7] ASoC: sun4i-i2s: Add support for H6 I2S
by Samuel Holland 20 Sep '20

20 Sep '20

Maxime, On 9/10/20 9:33 AM, Maxime Ripard wrote: > On Thu, Sep 03, 2020 at 09:54:39PM -0500, Samuel Holland wrote: >> On 9/3/20 3:58 PM, Maxime Ripard wrote: >>> On Thu, Sep 03, 2020 at 10:02:31PM +0200, Clément Péron wrote: >>>> Hi Maxime, >>>> >>>> On Wed, 29 Jul 2020 at 17:16, Mark Brown <broonie(a)kernel.org> wrote: >>>>> >>>>> On Wed, Jul 29, 2020 at 04:39:27PM +0200, Maxime Ripard wrote: >>>>> >>>>>> It really looks like the polarity of LRCK is fine though. The first word >>>>>> is sent with LRCK low, and then high, so we have channel 0 and then >>>>>> channel 1 which seems to be the proper ordering? >> >> Which image file is this in reference to? >> >>>>> Yes, that's normal. >>>> >>>> Thank you very much for this test. >>>> >>>> So I will revert the following commit: >>>> >>>> ASoC: sun4i-i2s: Fix the LRCK polarity >>>> >>>> https://github.com/clementperon/linux/commit/dd657eae8164f7e4bafe8b875031a7… >>> >>> Like I said, the current code is working as expected with regard to the >>> LRCK polarity. The issue is that the samples are delayed and start to be >>> transmitted on the wrong phase of the signal. >> >> Since an I2S LRCK frame is radially symmetric, "wrong phase" and "inverted >> polarity" look the same. The only way to definitively distinguish them is by >> looking at the sample data. >> >> In "i2s-h6.png", the samples are all zeroes, so you're assuming that the first >> sample transmitted (that is, when the bit clock starts transitioning) was a >> "left" sample. >> >> However, in "h6-i2s-start-data.png", there are pairs of samples we can look at. >> I'm still assuming that similar samples are a left/right pair, but that's >> probably a safe assumption. Here we see the first sample in each pair is >> transmitted with LRCK *high*, and the second sample in the pair is transmitted >> with LRCK *low*. This is the opposite of your claim above. >> >> An ideal test would put left/right markers and frame numbers in the data >> channel. The Python script below can generate such a file. Then you would know >> how much startup delay there is, which channel the "first sample" came from, and >> how each channel maps to the LRCK level. >> >> It would also be helpful to test DSP_A mode, where the LRCK signal is >> asymmetric and an inversion would be obvious. > > I had no idea that there was a wave module in Python, that's a great > suggestion, thanks! > > You'll find attached the screenshots for both the I2S and DSP_A formats. > I zoomed out a bit to be able to have the first valid samples, but it > should be readable. > > The code I used is there: > https://github.com/mripard/linux/tree/sunxi/h6-i2s-test > > It's basically the v3, plus the DT bits. > > As you can see, in the i2s case, LRCK starts low and then goes up, with > the first channel (0x2*** samples) transmitted first, so everything > looks right here. > > On the DSP_A screenshot, LRCK will be low with small bursts high, and > once again with the first channel being transmitted first, so it looks > right to me too. Indeed, for H6 i2s0 with LRCK inversion in software, everything looks correct on the wire. It's still concerning to me that the BSP has no evidence of this inversion, either for i2s0 or i2s1[1]. And the inversion seems not to be required for HDMI audio on mainline either (but there could be an inversion on the HDMI side or on the interconnect). Even so, your research is sufficient justification for me that the code is correct as-is (with the inversion). Thank you very much for collecting the data! Cheers, Samuel [1]: https://github.com/Allwinner-Homlet/H6-BSP4.9-linux/blob/e634a960316dddd1eb… where 1 == SND_SOC_DAIFMT_NB_NF, and there's no inversion in sunxi_daudio_init_fmt().

3 4

USB-Audio.conf patch for ASUS Xonar SE IEC958
by Brian McCarter 20 Sep '20

20 Sep '20

Hello, I recently purchased an ASUS Xonar SE sound card and found that the IEC958 output did not work under ALSA. The attached patch to alsa-lib enables the output. I can see that the SE is among several other Xonar models which require special treatment to enable the S/PDIF output, but this one appears to be the only one which puts the digital output on PCM #2. Brian McCarter

1 0

[PATCH 1/2] ASoC: tas2770: Fix calling reset in probe
by Dan Murphy 18 Sep '20

18 Sep '20

tas2770_reset is called during i2c probe. The reset calls the snd_soc_component_write which depends on the tas2770->component being available. The component pointer is not set until codec_probe so move the reset to the codec_probe after the pointer is set. Fixes: 1a476abc723e6 ("tas2770: add tas2770 smart PA kernel driver") Signed-off-by: Dan Murphy <dmurphy(a)ti.com> --- sound/soc/codecs/tas2770.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/tas2770.c b/sound/soc/codecs/tas2770.c index c09851834395..03d7ad1885b8 100644 --- a/sound/soc/codecs/tas2770.c +++ b/sound/soc/codecs/tas2770.c @@ -575,6 +575,8 @@ static int tas2770_codec_probe(struct snd_soc_component *component) tas2770->component = component; + tas2770_reset(tas2770); + return 0; } @@ -771,8 +773,6 @@ static int tas2770_i2c_probe(struct i2c_client *client, tas2770->channel_size = 0; tas2770->slot_width = 0; - tas2770_reset(tas2770); - result = tas2770_register_codec(tas2770); if (result) dev_err(tas2770->dev, "Register codec failed.\n"); -- 2.28.0

1 2

[PATCH 0/2] DAI driver for new XCVR IP
by Viorel Suman (OSS) 18 Sep '20

18 Sep '20

From: Viorel Suman <viorel.suman(a)nxp.com> DAI driver for new XCVR IP found in i.MX8MP. Viorel Suman (2): ASoC: fsl_xcvr: Add XCVR ASoC CPU DAI driver ASoC: dt-bindings: fsl_xcvr: Add document for XCVR .../devicetree/bindings/sound/fsl,xcvr.yaml | 104 ++ sound/soc/fsl/Kconfig | 10 + sound/soc/fsl/Makefile | 2 + sound/soc/fsl/fsl_xcvr.c | 1352 ++++++++++++++++++++ sound/soc/fsl/fsl_xcvr.h | 266 ++++ 5 files changed, 1734 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/fsl,xcvr.yaml create mode 100644 sound/soc/fsl/fsl_xcvr.c create mode 100644 sound/soc/fsl/fsl_xcvr.h -- 2.7.4

5 10

[PATCH 0/7] SOF fixes and updates
by Ranjani Sridharan 18 Sep '20

18 Sep '20

This series includes fixes for error reporting, topology parsing and runtime PM issues along with updates for DMIC support and IMX platforms. Iulian Olaru (2): ASoC: SOF: imx: Replace sdev->private with sdev->pdata->hw_pdata ASoC: SOF: sof-of-dev: Add .arch_ops field Jaska Uimonen (1): ASoC: SOF: intel: hda: support also devices with 1 and 3 dmics Keyon Jie (1): ASoC: SOF: topology: fix the ipc_size calculation for process component Rander Wang (1): ASoC: SOF: fix a runtime pm issue in SOF when HDMI codec doesn't work Ranjani Sridharan (2): ASoC: SOF: Intel: hda: report error only for the last ROM init iteration ASoC: SOF: Intel: hda: add extended rom status dump to error log sound/soc/sof/imx/Kconfig | 2 ++ sound/soc/sof/imx/imx8.c | 17 +++++++++---- sound/soc/sof/imx/imx8m.c | 10 +++++--- sound/soc/sof/intel/hda-codec.c | 4 +-- sound/soc/sof/intel/hda-loader.c | 42 +++++++++++++++++++------------- sound/soc/sof/intel/hda.c | 26 +++++++++++++++++++- sound/soc/sof/topology.c | 4 +-- 7 files changed, 74 insertions(+), 31 deletions(-) -- 2.25.1

3 10

[PATCH v2] ALSA: HDA: Early Forbid of runtime PM
by Harsha Priya 18 Sep '20

18 Sep '20

For certain codecs (like Realtek), pm_runtime_forbid() is invoked in the probe function after build_controls(). In a stress test, its observed occasionally that runtime PM calls are invoked before controls are built. This causes the codec to be runtime suspended before probe completes. Because of this, not all controls are enumerated correctly, and audio does not work until system is rebooted. This issue being common across all codecs, pm_runtime_forbid() is called when the codec object is created to fix this issue. A codec enables or disables runtime pm in its own probe function. Multiple stress tests of 2000+ cycles has been done to test the fix. Signed-off-by: Harsha Priya <harshapriya.n(a)intel.com> Signed-off-by: Emmanuel Jillela <emmanuel.jillela(a)intel.com> Reviewed-by: Kailang Yang <kailang(a)realtek.com> --- sound/pci/hda/hda_codec.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index e96a87f1b611..a356c21edb90 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -1000,6 +1000,9 @@ int snd_hda_codec_device_new(struct hda_bus *bus, struct snd_card *card, if (err < 0) goto error; + /* PM runtime needs to be enabled later after binding codec */ + pm_runtime_forbid(&codec->core.dev); + return 0; error: -- 2.17.1

3 3

[PATCH] ASoC: fix kconfig dependency warnings for SND_SOC_WM8731
by Necip Fazil Yildiran 18 Sep '20

18 Sep '20

SND_SOC_WM8731 was made visible and dependent on other symbols with commit 1291e14175e6 ("ASoC: codecs: Make OF supported CODECs visible in Kconfig"). To this respect, the symbols selecting SND_SOC_WM8731 turned out to be overlooking its dependencies. For example, enabling SND_SOC_DB1200 and disabling SND_SOC_I2C_AND_SPI results in the following Kconfig warning since SND_SOC_DB1200 selects SND_SOC_WM8731 but does not account for its dependencies: WARNING: unmet direct dependencies detected for SND_SOC_WM8731 Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_I2C_AND_SPI [=n] Selected by [y]: - SND_SOC_DB1200 [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_AU1XPSC [=y] Switch reverse dependencies on SND_SOC_WM8731 to normal dependencies. Fixes: 1291e14175e6 ("ASoC: codecs: Make OF supported CODECs visible in Kconfig") Signed-off-by: Necip Fazil Yildiran <fazilyildiran(a)gmail.com> --- sound/soc/atmel/Kconfig | 7 +++---- sound/soc/au1x/Kconfig | 3 +-- sound/soc/pxa/Kconfig | 4 ++-- 3 files changed, 6 insertions(+), 8 deletions(-) diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig index 71f2d42188c4..abb1284835c0 100644 --- a/sound/soc/atmel/Kconfig +++ b/sound/soc/atmel/Kconfig @@ -44,8 +44,8 @@ config SND_AT91_SOC_SAM9G20_WM8731 tristate "SoC Audio support for WM8731-based At91sam9g20 evaluation board" depends on ARCH_AT91 || COMPILE_TEST depends on ATMEL_SSC && SND_SOC_I2C_AND_SPI + depends on SND_SOC_WM8731 select SND_ATMEL_SOC_SSC_PDC - select SND_SOC_WM8731 help Say Y if you want to add support for SoC audio on WM8731-based AT91sam9g20 evaluation board. @@ -64,8 +64,8 @@ config SND_AT91_SOC_SAM9X5_WM8731 tristate "SoC Audio support for WM8731-based at91sam9x5 board" depends on ARCH_AT91 || COMPILE_TEST depends on ATMEL_SSC && SND_SOC_I2C_AND_SPI + depends on SND_SOC_WM8731 select SND_ATMEL_SOC_SSC_DMA - select SND_SOC_WM8731 help Say Y if you want to add support for audio SoC on an at91sam9x5 based board that is using WM8731 codec. @@ -110,8 +110,7 @@ config SND_ATMEL_SOC_I2S config SND_SOC_MIKROE_PROTO tristate "Support for Mikroe-PROTO board" depends on OF - depends on SND_SOC_I2C_AND_SPI - select SND_SOC_WM8731 + depends on SND_SOC_I2C_AND_SPI && SND_SOC_WM8731 help Say Y or M if you want to add support for MikroElektronika PROTO Audio Board. This board contains the WM8731 codec, which can be configured diff --git a/sound/soc/au1x/Kconfig b/sound/soc/au1x/Kconfig index 38de7c0efbc7..749e59fddfcd 100644 --- a/sound/soc/au1x/Kconfig +++ b/sound/soc/au1x/Kconfig @@ -53,12 +53,11 @@ config SND_SOC_DB1000 config SND_SOC_DB1200 tristate "DB1200/DB1300/DB1550 Audio support" - depends on SND_SOC_AU1XPSC + depends on SND_SOC_AU1XPSC && SND_SOC_WM8731 select SND_SOC_AU1XPSC_AC97 select SND_SOC_AC97_CODEC select SND_SOC_WM9712 select SND_SOC_AU1XPSC_I2S - select SND_SOC_WM8731 help Select this option to enable audio (AC97 and I2S) on the Alchemy/AMD/RMI/NetLogic Db1200, Db1550 and Db1300 evaluation boards. diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index 0ac85eada75c..eeb1dde59468 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -44,8 +44,8 @@ config SND_MMP_SOC_SSPA config SND_PXA2XX_SOC_CORGI tristate "SoC Audio support for Sharp Zaurus SL-C7x0" depends on SND_PXA2XX_SOC && PXA_SHARP_C7xx && I2C + depends on SND_SOC_WM8731 select SND_PXA2XX_SOC_I2S - select SND_SOC_WM8731 help Say Y if you want to add support for SoC audio on Sharp Zaurus SL-C7x0 models (Corgi, Shepherd, Husky). @@ -70,8 +70,8 @@ config SND_PXA2XX_SOC_Z2 config SND_PXA2XX_SOC_POODLE tristate "SoC Audio support for Poodle" depends on SND_PXA2XX_SOC && MACH_POODLE && I2C + depends on SND_SOC_WM8731 select SND_PXA2XX_SOC_I2S - select SND_SOC_WM8731 help Say Y if you want to add support for SoC audio on Sharp Zaurus SL-5600 model (Poodle). -- 2.25.1

2 1

Re: [PATCH v2 0/2] soundwire: use {u32|u16}p_replace_bits
by Liao, Bard 18 Sep '20

18 Sep '20

On 9/17/2020 8:01 PM, Vinod Koul wrote: > This is v2 of the series to fix usage of FIELD_PREP and use > {u32|u16}p_replace_bits. > > v1 used u32_replace_bits but looks like it might be removed so use the > {u32|u16}p_replace_bits() instead. Also this helped to find that one > instance in intel driver should have used u16p_replace_bits() so that is > fixed too > > Vinod Koul (2): > soundwire: cadence: use u32p_replace_bits > soundwire: intel: use {u32|u16}p_replace_bits > > drivers/soundwire/cadence_master.c | 21 ++++++++++----------- > drivers/soundwire/intel.c | 14 +++++++------- > 2 files changed, 17 insertions(+), 18 deletions(-) Tested it on a Intel platform. So Tested-by: Bard Liao <yung-chuan.liao(a)linux.intel.com>

2 1

[PATCH v4 0/3] soundwire: qcom: fix IP version v1.5.1 support
by Srinivas Kandagatla 18 Sep '20

18 Sep '20

While testing Qualcomm soundwire controller version 1.5.1, found two issue, Firstly the frame shape information configured vs the bus parameters are out of sync. secondly some ports on this ip version require block packing mode support. With this patchset I was able to test 2 WSA speakers! Also I found a regression due to move to REG_FIELD, which patch 1 fixes it! thanks, srini Change since v3: - use u32p_replace_bits instead of u32_replace_bits Srinivas Kandagatla (3): soundwire: qcom: clear BIT FIELDs before value set. soundwire: qcom: add support to block packing mode soundwire: qcom: get max rows and cols info from compatible drivers/soundwire/qcom.c | 70 +++++++++++++++++++++++++++++----------- 1 file changed, 51 insertions(+), 19 deletions(-) -- 2.21.0

2 4

[PATCH] soundwire: Add generic bandwidth allocation algorithm
by Bard Liao 18 Sep '20

18 Sep '20

This algorithm computes bus parameters like clock frequency, frame shape and port transport parameters based on active stream(s) running on the bus. Developers can also implement their own .compute_params() callback for specific resource management algorithm, and set if before calling sdw_add_bus_master() Credits: this patch is based on an earlier internal contribution by Vinod Koul, Sanyog Kale, Shreyas Nc and Hardik Shah. All hard-coded values were removed from the initial contribution to use BIOS information instead. Signed-off-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> --- drivers/soundwire/Kconfig | 5 + drivers/soundwire/Makefile | 3 + drivers/soundwire/bus.c | 6 + drivers/soundwire/bus.h | 46 +- .../soundwire/generic_bandwidth_allocation.c | 427 ++++++++++++++++++ drivers/soundwire/intel.c | 3 + drivers/soundwire/stream.c | 12 + include/linux/soundwire/sdw.h | 3 + 8 files changed, 503 insertions(+), 2 deletions(-) create mode 100644 drivers/soundwire/generic_bandwidth_allocation.c diff --git a/drivers/soundwire/Kconfig b/drivers/soundwire/Kconfig index f83d02c9c60a..016e74230bb7 100644 --- a/drivers/soundwire/Kconfig +++ b/drivers/soundwire/Kconfig @@ -24,6 +24,7 @@ config SOUNDWIRE_CADENCE config SOUNDWIRE_INTEL tristate "Intel SoundWire Master driver" select SOUNDWIRE_CADENCE + select SOUNDWIRE_GENERIC_ALLOCATION depends on ACPI && SND_SOC help SoundWire Intel Master driver. @@ -40,4 +41,8 @@ config SOUNDWIRE_QCOM If you have an Qualcomm platform which has a SoundWire Master then enable this config option to get the SoundWire support for that device + +config SOUNDWIRE_GENERIC_ALLOCATION + tristate + endif diff --git a/drivers/soundwire/Makefile b/drivers/soundwire/Makefile index 7c53ffae9f50..bf1e250d50dd 100644 --- a/drivers/soundwire/Makefile +++ b/drivers/soundwire/Makefile @@ -8,6 +8,9 @@ soundwire-bus-y := bus_type.o bus.o master.o slave.o mipi_disco.o stream.o \ sysfs_slave.o sysfs_slave_dpn.o obj-$(CONFIG_SOUNDWIRE) += soundwire-bus.o +soundwire-generic-allocation-objs := generic_bandwidth_allocation.o +obj-$(CONFIG_SOUNDWIRE_GENERIC_ALLOCATION) += soundwire-generic-allocation.o + ifdef CONFIG_DEBUG_FS soundwire-bus-y += debugfs.o endif diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c index d808f0256ba0..11c5a402afcd 100644 --- a/drivers/soundwire/bus.c +++ b/drivers/soundwire/bus.c @@ -61,6 +61,12 @@ int sdw_bus_master_add(struct sdw_bus *bus, struct device *parent, return -EINVAL; } + if (!bus->compute_params) { + dev_err(bus->dev, + "Bandwidth allocation not configured, compute_params no set\n"); + return -EINVAL; + } + mutex_init(&bus->msg_lock); mutex_init(&bus->bus_lock); INIT_LIST_HEAD(&bus->slaves); diff --git a/drivers/soundwire/bus.h b/drivers/soundwire/bus.h index 82484f741168..d2fda8c69f0d 100644 --- a/drivers/soundwire/bus.h +++ b/drivers/soundwire/bus.h @@ -69,6 +69,7 @@ struct sdw_msg { }; #define SDW_DOUBLE_RATE_FACTOR 2 +#define SDW_STRM_RATE_GROUPING 1 extern int sdw_rows[SDW_FRAME_ROWS]; extern int sdw_cols[SDW_FRAME_COLS]; @@ -154,9 +155,50 @@ int sdw_transfer_defer(struct sdw_bus *bus, struct sdw_msg *msg, int sdw_fill_msg(struct sdw_msg *msg, struct sdw_slave *slave, u32 addr, size_t count, u16 dev_num, u8 flags, u8 *buf); +/* Retrieve and return channel count from channel mask */ +static inline int sdw_ch_mask_to_ch(int ch_mask) +{ + int c = 0; + + for (c = 0; ch_mask; ch_mask >>= 1) + c += ch_mask & 1; + + return c; +} + +/* Fill transport parameter data structure */ +static inline void sdw_fill_xport_params(struct sdw_transport_params *params, + int port_num, bool grp_ctrl_valid, + int grp_ctrl, int sample_int, + int off1, int off2, + int hstart, int hstop, + int pack_mode, int lane_ctrl) +{ + params->port_num = port_num; + params->blk_grp_ctrl_valid = grp_ctrl_valid; + params->blk_grp_ctrl = grp_ctrl; + params->sample_interval = sample_int; + params->offset1 = off1; + params->offset2 = off2; + params->hstart = hstart; + params->hstop = hstop; + params->blk_pkg_mode = pack_mode; + params->lane_ctrl = lane_ctrl; +} + +/* Fill port parameter data structure */ +static inline void sdw_fill_port_params(struct sdw_port_params *params, + int port_num, int bps, + int flow_mode, int data_mode) +{ + params->num = port_num; + params->bps = bps; + params->flow_mode = flow_mode; + params->data_mode = data_mode; +} + /* Read-Modify-Write Slave register */ -static inline int -sdw_update(struct sdw_slave *slave, u32 addr, u8 mask, u8 val) +static inline int sdw_update(struct sdw_slave *slave, u32 addr, u8 mask, u8 val) { int tmp; diff --git a/drivers/soundwire/generic_bandwidth_allocation.c b/drivers/soundwire/generic_bandwidth_allocation.c new file mode 100644 index 000000000000..6088775b67a5 --- /dev/null +++ b/drivers/soundwire/generic_bandwidth_allocation.c @@ -0,0 +1,427 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) +// Copyright(c) 2015-2020 Intel Corporation. + +/* + * Bandwidth management algorithm based on 2^n gears + * + */ + +#include <linux/device.h> +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/slab.h> +#include <linux/soundwire/sdw.h> +#include "bus.h" + +#define SDW_STRM_RATE_GROUPING 1 + +struct sdw_group_params { + unsigned int rate; + int full_bw; + int payload_bw; + int hwidth; +}; + +struct sdw_group { + unsigned int count; + unsigned int max_size; + unsigned int *rates; +}; + +struct sdw_transport_data { + int hstart; + int hstop; + int block_offset; + int sub_block_offset; +}; + +static void sdw_compute_slave_ports(struct sdw_master_runtime *m_rt, + struct sdw_transport_data *t_data) +{ + struct sdw_slave_runtime *s_rt = NULL; + struct sdw_port_runtime *p_rt; + int port_bo, sample_int; + unsigned int rate, bps, ch = 0; + unsigned int slave_total_ch; + + port_bo = t_data->block_offset; + + list_for_each_entry(s_rt, &m_rt->slave_rt_list, m_rt_node) { + rate = m_rt->stream->params.rate; + bps = m_rt->stream->params.bps; + sample_int = (m_rt->bus->params.curr_dr_freq / rate); + slave_total_ch = 0; + + list_for_each_entry(p_rt, &s_rt->port_list, port_node) { + ch = sdw_ch_mask_to_ch(p_rt->ch_mask); + + sdw_fill_xport_params(&p_rt->transport_params, + p_rt->num, false, + SDW_BLK_GRP_CNT_1, + sample_int, port_bo, port_bo >> 8, + t_data->hstart, + t_data->hstop, + (SDW_BLK_GRP_CNT_1 * ch), 0x0); + + sdw_fill_port_params(&p_rt->port_params, + p_rt->num, bps, + SDW_PORT_FLOW_MODE_ISOCH, + SDW_PORT_DATA_MODE_NORMAL); + + port_bo += bps * ch; + slave_total_ch += ch; + } + + if (m_rt->direction == SDW_DATA_DIR_TX && + m_rt->ch_count == slave_total_ch) { + /* + * Slave devices were configured to access all channels + * of the stream, which indicates that they operate in + * 'mirror mode'. Make sure we reset the port offset for + * the next device in the list + */ + port_bo = t_data->block_offset; + } + } +} + +static void sdw_compute_master_ports(struct sdw_master_runtime *m_rt, + struct sdw_group_params *params, + int port_bo, int hstop) +{ + struct sdw_transport_data t_data = {0}; + struct sdw_port_runtime *p_rt; + struct sdw_bus *bus = m_rt->bus; + int sample_int, hstart = 0; + unsigned int rate, bps, ch, no_ch; + + rate = m_rt->stream->params.rate; + bps = m_rt->stream->params.bps; + ch = m_rt->ch_count; + sample_int = (bus->params.curr_dr_freq / rate); + + if (rate != params->rate) + return; + + t_data.hstop = hstop; + hstart = hstop - params->hwidth + 1; + t_data.hstart = hstart; + + list_for_each_entry(p_rt, &m_rt->port_list, port_node) { + no_ch = sdw_ch_mask_to_ch(p_rt->ch_mask); + + sdw_fill_xport_params(&p_rt->transport_params, p_rt->num, + false, SDW_BLK_GRP_CNT_1, sample_int, + port_bo, port_bo >> 8, hstart, hstop, + (SDW_BLK_GRP_CNT_1 * no_ch), 0x0); + + sdw_fill_port_params(&p_rt->port_params, + p_rt->num, bps, + SDW_PORT_FLOW_MODE_ISOCH, + SDW_PORT_DATA_MODE_NORMAL); + + /* Check for first entry */ + if (!(p_rt == list_first_entry(&m_rt->port_list, + struct sdw_port_runtime, + port_node))) { + port_bo += bps * ch; + continue; + } + + t_data.hstart = hstart; + t_data.hstop = hstop; + t_data.block_offset = port_bo; + t_data.sub_block_offset = 0; + port_bo += bps * ch; + } + + sdw_compute_slave_ports(m_rt, &t_data); +} + +static void _sdw_compute_port_params(struct sdw_bus *bus, + struct sdw_group_params *params, int count) +{ + struct sdw_master_runtime *m_rt = NULL; + int hstop = bus->params.col - 1; + int block_offset, port_bo, i; + + /* Run loop for all groups to compute transport parameters */ + for (i = 0; i < count; i++) { + port_bo = 1; + block_offset = 1; + + list_for_each_entry(m_rt, &bus->m_rt_list, bus_node) { + sdw_compute_master_ports(m_rt, &params[i], + port_bo, hstop); + + block_offset += m_rt->ch_count * + m_rt->stream->params.bps; + port_bo = block_offset; + } + + hstop = hstop - params[i].hwidth; + } +} + +static int sdw_compute_group_params(struct sdw_bus *bus, + struct sdw_group_params *params, + int *rates, int count) +{ + struct sdw_master_runtime *m_rt = NULL; + int sel_col = bus->params.col; + unsigned int rate, bps, ch; + int i, column_needed = 0; + + /* Calculate bandwidth per group */ + for (i = 0; i < count; i++) { + params[i].rate = rates[i]; + params[i].full_bw = bus->params.curr_dr_freq / params[i].rate; + } + + list_for_each_entry(m_rt, &bus->m_rt_list, bus_node) { + rate = m_rt->stream->params.rate; + bps = m_rt->stream->params.bps; + ch = m_rt->ch_count; + + for (i = 0; i < count; i++) { + if (rate == params[i].rate) + params[i].payload_bw += bps * ch; + } + } + + for (i = 0; i < count; i++) { + params[i].hwidth = (sel_col * + params[i].payload_bw + params[i].full_bw - 1) / + params[i].full_bw; + + column_needed += params[i].hwidth; + } + + if (column_needed > sel_col - 1) + return -EINVAL; + + return 0; +} + +static int sdw_add_element_group_count(struct sdw_group *group, + unsigned int rate) +{ + int num = group->count; + int i; + + for (i = 0; i <= num; i++) { + if (rate == group->rates[i]) + break; + + if (i != num) + continue; + + if (group->count >= group->max_size) { + unsigned int *rates; + + group->max_size += 1; + rates = krealloc(group->rates, + (sizeof(int) * group->max_size), + GFP_KERNEL); + if (!rates) + return -ENOMEM; + group->rates = rates; + } + + group->rates[group->count++] = rate; + } + + return 0; +} + +static int sdw_get_group_count(struct sdw_bus *bus, + struct sdw_group *group) +{ + struct sdw_master_runtime *m_rt; + unsigned int rate; + int ret = 0; + + group->count = 0; + group->max_size = SDW_STRM_RATE_GROUPING; + group->rates = kcalloc(group->max_size, sizeof(int), GFP_KERNEL); + if (!group->rates) + return -ENOMEM; + + list_for_each_entry(m_rt, &bus->m_rt_list, bus_node) { + rate = m_rt->stream->params.rate; + if (m_rt == list_first_entry(&bus->m_rt_list, + struct sdw_master_runtime, + bus_node)) { + group->rates[group->count++] = rate; + + } else { + ret = sdw_add_element_group_count(group, rate); + if (ret < 0) { + kfree(group->rates); + return ret; + } + } + } + + return ret; +} + +/** + * sdw_compute_port_params: Compute transport and port parameters + * + * @bus: SDW Bus instance + */ +static int sdw_compute_port_params(struct sdw_bus *bus) +{ + struct sdw_group_params *params = NULL; + struct sdw_group group; + int ret; + + ret = sdw_get_group_count(bus, &group); + if (ret < 0) + return ret; + + if (group.count == 0) + goto out; + + params = kcalloc(group.count, sizeof(*params), GFP_KERNEL); + if (!params) { + ret = -ENOMEM; + goto out; + } + + /* Compute transport parameters for grouped streams */ + ret = sdw_compute_group_params(bus, params, + &group.rates[0], group.count); + if (ret < 0) + goto free_params; + + _sdw_compute_port_params(bus, params, group.count); + +free_params: + kfree(params); +out: + kfree(group.rates); + + return ret; +} + +static int sdw_select_row_col(struct sdw_bus *bus, int clk_freq) +{ + struct sdw_master_prop *prop = &bus->prop; + int frame_int, frame_freq; + int r, c; + + for (c = 0; c < SDW_FRAME_COLS; c++) { + for (r = 0; r < SDW_FRAME_ROWS; r++) { + if (sdw_rows[r] != prop->default_row || + sdw_cols[c] != prop->default_col) + continue; + + frame_int = sdw_rows[r] * sdw_cols[c]; + frame_freq = clk_freq / frame_int; + + if ((clk_freq - (frame_freq * SDW_FRAME_CTRL_BITS)) < + bus->params.bandwidth) + continue; + + bus->params.row = sdw_rows[r]; + bus->params.col = sdw_cols[c]; + return 0; + } + } + + return -EINVAL; +} + +/** + * sdw_compute_bus_params: Compute bus parameters + * + * @bus: SDW Bus instance + */ +static int sdw_compute_bus_params(struct sdw_bus *bus) +{ + unsigned int max_dr_freq, curr_dr_freq = 0; + struct sdw_master_prop *mstr_prop = NULL; + int i, clk_values, ret; + bool is_gear = false; + u32 *clk_buf; + + mstr_prop = &bus->prop; + if (!mstr_prop) + return -EINVAL; + + if (mstr_prop->num_clk_gears) { + clk_values = mstr_prop->num_clk_gears; + clk_buf = mstr_prop->clk_gears; + is_gear = true; + } else if (mstr_prop->num_clk_freq) { + clk_values = mstr_prop->num_clk_freq; + clk_buf = mstr_prop->clk_freq; + } else { + clk_values = 1; + clk_buf = NULL; + } + + max_dr_freq = mstr_prop->max_clk_freq * SDW_DOUBLE_RATE_FACTOR; + + for (i = 0; i < clk_values; i++) { + if (!clk_buf) + curr_dr_freq = max_dr_freq; + else + curr_dr_freq = (is_gear) ? + (max_dr_freq >> clk_buf[i]) : + clk_buf[i] * SDW_DOUBLE_RATE_FACTOR; + + if (curr_dr_freq <= bus->params.bandwidth) + continue; + + break; + + /* + * TODO: Check all the Slave(s) port(s) audio modes and find + * whether given clock rate is supported with glitchless + * transition. + */ + } + + if (i == clk_values) + return -EINVAL; + + ret = sdw_select_row_col(bus, curr_dr_freq); + if (ret < 0) + return -EINVAL; + + bus->params.curr_dr_freq = curr_dr_freq; + return 0; +} + +/** + * sdw_compute_params: Compute bus, transport and port parameters + * + * @bus: SDW Bus instance + */ +int sdw_compute_params(struct sdw_bus *bus) +{ + int ret; + + /* Computes clock frequency, frame shape and frame frequency */ + ret = sdw_compute_bus_params(bus); + if (ret < 0) { + dev_err(bus->dev, "Compute bus params failed: %d", ret); + return ret; + } + + /* Compute transport and port params */ + ret = sdw_compute_port_params(bus); + if (ret < 0) { + dev_err(bus->dev, "Compute transport params failed: %d", ret); + return ret; + } + + return 0; +} +EXPORT_SYMBOL(sdw_compute_params); + +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_DESCRIPTION("SoundWire Generic Bandwidth Allocation"); diff --git a/drivers/soundwire/intel.c b/drivers/soundwire/intel.c index e047910d73f5..1211d114ff59 100644 --- a/drivers/soundwire/intel.c +++ b/drivers/soundwire/intel.c @@ -1318,6 +1318,9 @@ static int intel_master_probe(struct platform_device *pdev) /* set driver data, accessed by snd_soc_dai_get_drvdata() */ dev_set_drvdata(dev, cdns); + /* use generic bandwidth allocation algorithm */ + sdw->cdns.bus.compute_params = sdw_compute_params; + ret = sdw_bus_master_add(bus, dev, dev->fwnode); if (ret) { dev_err(dev, "sdw_bus_master_add fail: %d\n", ret); diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c index b8b1973e3ee2..f3219d1fa63b 100644 --- a/drivers/soundwire/stream.c +++ b/drivers/soundwire/stream.c @@ -25,8 +25,10 @@ int sdw_rows[SDW_FRAME_ROWS] = {48, 50, 60, 64, 75, 80, 125, 147, 96, 100, 120, 128, 150, 160, 250, 0, 192, 200, 240, 256, 72, 144, 90, 180}; +EXPORT_SYMBOL(sdw_rows); int sdw_cols[SDW_FRAME_COLS] = {2, 4, 6, 8, 10, 12, 14, 16}; +EXPORT_SYMBOL(sdw_cols); int sdw_find_col_index(int col) { @@ -1782,6 +1784,16 @@ static int _sdw_deprepare_stream(struct sdw_stream_runtime *stream) bus->params.bandwidth -= m_rt->stream->params.rate * m_rt->ch_count * m_rt->stream->params.bps; + /* Compute params */ + if (bus->compute_params) { + ret = bus->compute_params(bus); + if (ret < 0) { + dev_err(bus->dev, "Compute params failed: %d", + ret); + return ret; + } + } + /* Program params */ ret = sdw_program_params(bus, false); if (ret < 0) { diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h index 1e9010c139f0..3fa1b18f7f97 100644 --- a/include/linux/soundwire/sdw.h +++ b/include/linux/soundwire/sdw.h @@ -955,6 +955,9 @@ struct sdw_stream_runtime { struct sdw_stream_runtime *sdw_alloc_stream(const char *stream_name); void sdw_release_stream(struct sdw_stream_runtime *stream); + +int sdw_compute_params(struct sdw_bus *bus); + int sdw_stream_add_master(struct sdw_bus *bus, struct sdw_stream_config *stream_config, struct sdw_port_config *port_config, -- 2.17.1

3 3