September 2020 - Alsa-devel - mailman.alsa-project.org

[PATCH v2] ALSA: firewire: Replace tasklet with work
by Takashi Iwai 11 Sep '20

11 Sep '20

The tasklet is an old API that should be deprecated, usually can be converted to another decent API. In FireWire driver, a tasklet is still used for offloading the AMDTP PCM stream handling. It can be achieved gracefully with a work queued, too. This patch replaces the tasklet usage in firewire-lib driver with a simple work. The conversion is fairly straightforward but for the in_interrupt() checks that are replaced with the check using the current_work(). Note that in_interrupt() in amdtp_packet tracepoint is still kept as is. This is the place that is probed by both softirq of 1394 OHCI and a user task of a PCM application, and the work handling is already filtered in amdtp_domain_stream_pcm_pointer(). Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- v1->v2: Drop in_interrupt() conversion in tracepoint sound/firewire/amdtp-stream.c | 25 +++++++++++++------------ sound/firewire/amdtp-stream.h | 2 +- 2 files changed, 14 insertions(+), 13 deletions(-) diff --git a/sound/firewire/amdtp-stream.c b/sound/firewire/amdtp-stream.c index ee1c428b1fd3..4e2f2bb7879f 100644 --- a/sound/firewire/amdtp-stream.c +++ b/sound/firewire/amdtp-stream.c @@ -64,7 +64,7 @@ #define IT_PKT_HEADER_SIZE_CIP 8 // For 2 CIP header. #define IT_PKT_HEADER_SIZE_NO_CIP 0 // Nothing. -static void pcm_period_tasklet(struct tasklet_struct *t); +static void pcm_period_work(struct work_struct *work); /** * amdtp_stream_init - initialize an AMDTP stream structure @@ -94,7 +94,7 @@ int amdtp_stream_init(struct amdtp_stream *s, struct fw_unit *unit, s->flags = flags; s->context = ERR_PTR(-1); mutex_init(&s->mutex); - tasklet_setup(&s->period_tasklet, pcm_period_tasklet); + INIT_WORK(&s->period_work, pcm_period_work); s->packet_index = 0; init_waitqueue_head(&s->callback_wait); @@ -203,7 +203,7 @@ int amdtp_stream_add_pcm_hw_constraints(struct amdtp_stream *s, // Linux driver for 1394 OHCI controller voluntarily flushes isoc // context when total size of accumulated context header reaches - // PAGE_SIZE. This kicks tasklet for the isoc context and brings + // PAGE_SIZE. This kicks work for the isoc context and brings // callback in the middle of scheduled interrupts. // Although AMDTP streams in the same domain use the same events per // IRQ, use the largest size of context header between IT/IR contexts. @@ -333,7 +333,7 @@ EXPORT_SYMBOL(amdtp_stream_get_max_payload); */ void amdtp_stream_pcm_prepare(struct amdtp_stream *s) { - tasklet_kill(&s->period_tasklet); + cancel_work_sync(&s->period_work); s->pcm_buffer_pointer = 0; s->pcm_period_pointer = 0; } @@ -437,13 +437,14 @@ static void update_pcm_pointers(struct amdtp_stream *s, s->pcm_period_pointer += frames; if (s->pcm_period_pointer >= pcm->runtime->period_size) { s->pcm_period_pointer -= pcm->runtime->period_size; - tasklet_hi_schedule(&s->period_tasklet); + queue_work(system_highpri_wq, &s->period_work); } } -static void pcm_period_tasklet(struct tasklet_struct *t) +static void pcm_period_work(struct work_struct *work) { - struct amdtp_stream *s = from_tasklet(s, t, period_tasklet); + struct amdtp_stream *s = container_of(work, struct amdtp_stream, + period_work); struct snd_pcm_substream *pcm = READ_ONCE(s->pcm); if (pcm) @@ -794,7 +795,7 @@ static void generate_pkt_descs(struct amdtp_stream *s, struct pkt_desc *descs, static inline void cancel_stream(struct amdtp_stream *s) { s->packet_index = -1; - if (in_interrupt()) + if (current_work() == &s->period_work) amdtp_stream_pcm_abort(s); WRITE_ONCE(s->pcm_buffer_pointer, SNDRV_PCM_POS_XRUN); } @@ -1184,7 +1185,7 @@ unsigned long amdtp_domain_stream_pcm_pointer(struct amdtp_domain *d, if (irq_target && amdtp_stream_running(irq_target)) { // This function is called in software IRQ context of - // period_tasklet or process context. + // period_work or process context. // // When the software IRQ context was scheduled by software IRQ // context of IT contexts, queued packets were already handled. @@ -1195,9 +1196,9 @@ unsigned long amdtp_domain_stream_pcm_pointer(struct amdtp_domain *d, // immediately to keep better granularity of PCM pointer. // // Later, the process context will sometimes schedules software - // IRQ context of the period_tasklet. Then, no need to flush the + // IRQ context of the period_work. Then, no need to flush the // queue by the same reason as described in the above - if (!in_interrupt()) { + if (current_work() != &s->period_work) { // Queued packet should be processed without any kernel // preemption to keep latency against bus cycle. preempt_disable(); @@ -1263,7 +1264,7 @@ static void amdtp_stream_stop(struct amdtp_stream *s) return; } - tasklet_kill(&s->period_tasklet); + cancel_work_sync(&s->period_work); fw_iso_context_stop(s->context); fw_iso_context_destroy(s->context); s->context = ERR_PTR(-1); diff --git a/sound/firewire/amdtp-stream.h b/sound/firewire/amdtp-stream.h index 703b710aaf7f..2ceb57d1d58e 100644 --- a/sound/firewire/amdtp-stream.h +++ b/sound/firewire/amdtp-stream.h @@ -163,7 +163,7 @@ struct amdtp_stream { /* For a PCM substream processing. */ struct snd_pcm_substream *pcm; - struct tasklet_struct period_tasklet; + struct work_struct period_work; snd_pcm_uframes_t pcm_buffer_pointer; unsigned int pcm_period_pointer; -- 2.16.4

2 2

[PATCH 1/4] ASoC: odroid: Add missing properties
by Krzysztof Kozlowski 11 Sep '20

11 Sep '20

Usage of "unevaluatedProperties: false" is not correct as it suppresses warnings about all undocumented properties. Instead, add all missing properties. Signed-off-by: Krzysztof Kozlowski <krzk(a)kernel.org> --- Fixup for: https://lore.kernel.org/lkml/30b8ea43-c2d0-5ddf-dc16-a8fe80d47c38@samsung.c… --- .../devicetree/bindings/sound/samsung,odroid.yaml | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml index de1be3d6d1e9..e8122bc87362 100644 --- a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml +++ b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml @@ -28,6 +28,11 @@ properties: $ref: /schemas/types.yaml#/definitions/string description: The user-visible name of this sound complex. + assigned-clock-parents: true + assigned-clock-rates: true + assigned-clocks: true + clocks: true + cpu: type: object properties: @@ -69,7 +74,7 @@ required: - cpu - codec -unevaluatedProperties: false +additionalProperties: false examples: - | -- 2.17.1

2 5

[PATCH] ASoC: core: Optionaly add the component driver name to the component name
by Dafna Hirschfeld 11 Sep '20

11 Sep '20

The ASoC platform driver for Mediatek MT8173 registers several components with identical name. This cause an error: "Directory '11220000.audio-controller' with parent 'mtk-rt5650' already present!" when adding debugfs directory for those components. To fix this, the function 'fmt_single_name' can receive the name of the component driver and concatenate it to the name of the debugfs directory for the component. Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld(a)collabora.com> --- sound/soc/soc-core.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 74df22486e30..f470e713b030 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -2227,7 +2227,7 @@ EXPORT_SYMBOL_GPL(snd_soc_unregister_card); * Simplify DAI link configuration by removing ".-1" from device names * and sanitizing names. */ -static char *fmt_single_name(struct device *dev, int *id) +static char *fmt_single_name(struct device *dev, int *id, const char *component_driver_name) { const char *devname = dev_name(dev); char *found, *name; @@ -2263,6 +2263,12 @@ static char *fmt_single_name(struct device *dev, int *id) *id = 0; } + if (component_driver_name) { + char *tmp = name; + + name = devm_kasprintf(dev, GFP_KERNEL, "%s-%s", name, component_driver_name); + devm_kfree(dev, tmp); + } return name; } @@ -2327,7 +2333,7 @@ struct snd_soc_dai *snd_soc_register_dai(struct snd_soc_component *component, */ if (legacy_dai_naming && (dai_drv->id == 0 || dai_drv->name == NULL)) { - dai->name = fmt_single_name(dev, &dai->id); + dai->name = fmt_single_name(dev, &dai->id, NULL); } else { dai->name = fmt_multiple_name(dev, dai_drv); if (dai_drv->id) @@ -2460,7 +2466,7 @@ int snd_soc_component_initialize(struct snd_soc_component *component, INIT_LIST_HEAD(&component->card_list); mutex_init(&component->io_mutex); - component->name = fmt_single_name(dev, &component->id); + component->name = fmt_single_name(dev, &component->id, driver->name); if (!component->name) { dev_err(dev, "ASoC: Failed to allocate name\n"); return -ENOMEM; -- 2.17.1

2 1

[PATCH] ASoC: ak4458: Add DSD support for ak4458 and ak4497
by Shengjiu Wang 11 Sep '20

11 Sep '20

ak4458 can't support DSD512 format, but ak4497 can, so add a new variable in ak4458_drvdata to distinguish these two platform. In hw_params(), calculate bit clock according to different DSD format and configure DSD register. Signed-off-by: Shengjiu Wang <shengjiu.wang(a)nxp.com> --- sound/soc/codecs/ak4458.c | 82 +++++++++++++++++++++++++++++++++++---- sound/soc/codecs/ak4458.h | 5 ++- 2 files changed, 79 insertions(+), 8 deletions(-) diff --git a/sound/soc/codecs/ak4458.c b/sound/soc/codecs/ak4458.c index 763e6839428f..9054964d5cfa 100644 --- a/sound/soc/codecs/ak4458.c +++ b/sound/soc/codecs/ak4458.c @@ -31,11 +31,13 @@ static const char *ak4458_supply_names[AK4458_NUM_SUPPLIES] = { struct ak4458_drvdata { struct snd_soc_dai_driver *dai_drv; const struct snd_soc_component_driver *comp_drv; + bool dsd512; /* DSD512 is supported or not */ }; /* AK4458 Codec Private Data */ struct ak4458_priv { struct regulator_bulk_data supplies[AK4458_NUM_SUPPLIES]; + const struct ak4458_drvdata *drvdata; struct device *dev; struct regmap *regmap; struct gpio_desc *reset_gpiod; @@ -136,6 +138,10 @@ static const char * const ak4458_ats_select_texts[] = { /* DIF2 bit Audio Interface Format Setting(BICK fs) */ static const char * const ak4458_dif_select_texts[] = {"32fs,48fs", "64fs",}; +/* DSD input pin select */ +static const char * const ak4497_dsd_input_path_select[] = { + "16_17_19pin", "3_4_5pin"}; + static const struct soc_enum ak4458_dac1_dem_enum = SOC_ENUM_SINGLE(AK4458_01_CONTROL2, 1, ARRAY_SIZE(ak4458_dem_select_texts), @@ -175,6 +181,10 @@ static const struct soc_enum ak4458_dif_enum = SOC_ENUM_SINGLE(AK4458_00_CONTROL1, 3, ARRAY_SIZE(ak4458_dif_select_texts), ak4458_dif_select_texts); +static const struct soc_enum ak4497_dsdp_enum = + SOC_ENUM_SINGLE(AK4458_09_DSD2, 2, + ARRAY_SIZE(ak4497_dsd_input_path_select), + ak4497_dsd_input_path_select); static int get_digfil(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) @@ -282,6 +292,7 @@ static const struct snd_kcontrol_new ak4497_snd_controls[] = { SOC_ENUM("AK4497 Sound Mode", ak4458_sm_enum), SOC_ENUM("AK4497 Attenuation transition Time Setting", ak4458_ats_enum), + SOC_ENUM("AK4497 DSD Data Input Pin", ak4497_dsdp_enum), }; /* ak4497 dapm widgets */ @@ -325,12 +336,54 @@ static int ak4458_hw_params(struct snd_pcm_substream *substream, struct snd_soc_component *component = dai->component; struct ak4458_priv *ak4458 = snd_soc_component_get_drvdata(component); int pcm_width = max(params_physical_width(params), ak4458->slot_width); - int nfs1; - u8 format; + u8 format, dsdsel0, dsdsel1; + int nfs1, dsd_bclk; nfs1 = params_rate(params); ak4458->fs = nfs1; + /* calculate bit clock */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_DSD_U8: + case SNDRV_PCM_FORMAT_DSD_U16_LE: + case SNDRV_PCM_FORMAT_DSD_U16_BE: + case SNDRV_PCM_FORMAT_DSD_U32_LE: + case SNDRV_PCM_FORMAT_DSD_U32_BE: + dsd_bclk = nfs1 * params_physical_width(params); + switch (dsd_bclk) { + case 2822400: + dsdsel0 = 0; + dsdsel1 = 0; + break; + case 5644800: + dsdsel0 = 1; + dsdsel1 = 0; + break; + case 11289600: + dsdsel0 = 0; + dsdsel1 = 1; + break; + case 22579200: + if (ak4458->drvdata->dsd512) { + dsdsel0 = 1; + dsdsel1 = 1; + } else { + dev_err(dai->dev, "DSD512 not supported.\n"); + return -EINVAL; + } + break; + default: + dev_err(dai->dev, "Unsupported dsd bclk.\n"); + return -EINVAL; + } + + snd_soc_component_update_bits(component, AK4458_06_DSD1, + AK4458_DSDSEL_MASK, dsdsel0); + snd_soc_component_update_bits(component, AK4458_09_DSD2, + AK4458_DSDSEL_MASK, dsdsel1); + break; + } + /* Master Clock Frequency Auto Setting Mode Enable */ snd_soc_component_update_bits(component, AK4458_00_CONTROL1, 0x80, 0x80); @@ -355,6 +408,9 @@ static int ak4458_hw_params(struct snd_pcm_substream *substream, case SND_SOC_DAIFMT_DSP_B: format = AK4458_DIF_32BIT_MSB; break; + case SND_SOC_DAIFMT_PDM: + format = AK4458_DIF_32BIT_MSB; + break; default: return -EINVAL; } @@ -393,6 +449,7 @@ static int ak4458_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt) case SND_SOC_DAIFMT_LEFT_J: case SND_SOC_DAIFMT_RIGHT_J: case SND_SOC_DAIFMT_DSP_B: + case SND_SOC_DAIFMT_PDM: ak4458->fmt = fmt & SND_SOC_DAIFMT_FORMAT_MASK; break; default: @@ -401,6 +458,12 @@ static int ak4458_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt) return -EINVAL; } + /* DSD mode */ + snd_soc_component_update_bits(component, AK4458_02_CONTROL3, + AK4458_DP_MASK, + ak4458->fmt == SND_SOC_DAIFMT_PDM ? + AK4458_DP_MASK : 0); + ak4458_rstn_control(component, 0); ak4458_rstn_control(component, 1); @@ -472,7 +535,10 @@ static int ak4458_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask, #define AK4458_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\ SNDRV_PCM_FMTBIT_S24_LE |\ - SNDRV_PCM_FMTBIT_S32_LE) + SNDRV_PCM_FMTBIT_S32_LE |\ + SNDRV_PCM_FMTBIT_DSD_U8 |\ + SNDRV_PCM_FMTBIT_DSD_U16_LE |\ + SNDRV_PCM_FMTBIT_DSD_U32_LE) static const unsigned int ak4458_rates[] = { 8000, 11025, 16000, 22050, @@ -668,11 +734,13 @@ static const struct regmap_config ak4458_regmap = { static const struct ak4458_drvdata ak4458_drvdata = { .dai_drv = &ak4458_dai, .comp_drv = &soc_codec_dev_ak4458, + .dsd512 = false, }; static const struct ak4458_drvdata ak4497_drvdata = { .dai_drv = &ak4497_dai, .comp_drv = &soc_codec_dev_ak4497, + .dsd512 = true, }; static const struct dev_pm_ops ak4458_pm = { @@ -684,7 +752,6 @@ static const struct dev_pm_ops ak4458_pm = { static int ak4458_i2c_probe(struct i2c_client *i2c) { struct ak4458_priv *ak4458; - const struct ak4458_drvdata *drvdata; int ret, i; ak4458 = devm_kzalloc(&i2c->dev, sizeof(*ak4458), GFP_KERNEL); @@ -698,7 +765,7 @@ static int ak4458_i2c_probe(struct i2c_client *i2c) i2c_set_clientdata(i2c, ak4458); ak4458->dev = &i2c->dev; - drvdata = of_device_get_match_data(&i2c->dev); + ak4458->drvdata = of_device_get_match_data(&i2c->dev); ak4458->reset_gpiod = devm_gpiod_get_optional(ak4458->dev, "reset", GPIOD_OUT_LOW); @@ -720,8 +787,9 @@ static int ak4458_i2c_probe(struct i2c_client *i2c) return ret; } - ret = devm_snd_soc_register_component(ak4458->dev, drvdata->comp_drv, - drvdata->dai_drv, 1); + ret = devm_snd_soc_register_component(ak4458->dev, + ak4458->drvdata->comp_drv, + ak4458->drvdata->dai_drv, 1); if (ret < 0) { dev_err(ak4458->dev, "Failed to register CODEC: %d\n", ret); return ret; diff --git a/sound/soc/codecs/ak4458.h b/sound/soc/codecs/ak4458.h index f906215f7e4e..9548c5d78621 100644 --- a/sound/soc/codecs/ak4458.h +++ b/sound/soc/codecs/ak4458.h @@ -83,4 +83,7 @@ #define AK4458_ATS_SHIFT 6 #define AK4458_ATS_MASK GENMASK(7, 6) -#endif /* _AK4458_H */ +#define AK4458_DSDSEL_MASK (0x1 << 0) +#define AK4458_DP_MASK (0x1 << 7) + +#endif -- 2.27.0

3 2

[PATCH v8 0/3] Add documentation and machine driver for SC7180 sound card
by Cheng-Yi Chiang 11 Sep '20

11 Sep '20

Note: - The machine driver patch is made by the collaboration of Cheng-Yi Chiang <cychiang(a)chromium.org> Rohit kumar <rohitkr(a)codeaurora.org> Ajit Pandey <ajitp(a)codeaurora.org> But Ajit has left codeaurora. - This patch series needs HDMI DAI name defined in sc7180-lpass.h. https://patchwork.kernel.org/patch/11745565/ Changes from v1 to v2: - Ducumentation: Addressed all suggestions from Doug. - Machine driver: - Fix comment style for license. - Sort includes. - Remove sc7180_snd_hw_params. - Remove sc7180_dai_init and use aux device instead for headset jack registration. - Statically define format for Primary MI2S. - Atomic is not a concern because there is mutex in card to make sure startup and shutdown happen sequentially. - Fix missing return -EINVAL in startup. - Use static sound card. - Use devm_kzalloc to avoid kfree. Changes from v2 to v3: - Ducumentation: Addressed suggestions from Srini. - Machine driver: - Reuse qcom_snd_parse_of to parse properties. - Remove playback-only and capture-only. - Misc fixes to address comments. Changes from v3 to v4: - Ducumentation: Addressed suggestions from Rob. - Remove definition of dai. - Use 'sound-dai: true' for sound-dai schema. - Add reg property to pass 'make dt_binding_check' check although reg is not used in the driver. - Machine driver: - Add Reviewed-by: Tzung-Bi Shih <tzungbi(a)google.com> Changes from v4 to v5: - Documentation: Addressed suggestions from Rob. - Add definition for "#address-cells" and "#size-cells". - Add additionalProperties: false - Add required properties. Changes from v5 to v6: - Documentation: Addressed suggestions from Rob. - Drop contains in compatible strings. - Only allow dai-link@[0-9] - Remove reg ref since it has a type definition already. Changes from v6 to v7 - Documentation: - Add headset-jack and hdmi-jack to specify the codec responsible for jack detection. - HDMI codec driver: - Use component set_jack ops instead of exporting hdmi_codec_set_jack_detect. - Machine driver: - Removed aux device following Stephan's suggestion. - Use headset-jack and hdmi-jack to specify the codec responsible for jack detection. - Add support for HDMI(actually DP) playback. Changes from v7 to v8 - Documentation: - Remove headset-jack and hdmi-jack. - Machine driver: - Let machine driver decide whether there is a jack on the DAI. Ajit Pandey (1): ASoC: qcom: sc7180: Add machine driver for sound card registration Cheng-Yi Chiang (2): ASoC: hdmi-codec: Use set_jack ops to set jack ASoC: qcom: dt-bindings: Add sc7180 machine bindings .../bindings/sound/qcom,sc7180.yaml | 130 +++++++++ include/sound/hdmi-codec.h | 3 - sound/soc/codecs/hdmi-codec.c | 12 +- sound/soc/mediatek/mt8173/mt8173-rt5650.c | 5 +- .../mediatek/mt8183/mt8183-da7219-max98357.c | 5 +- .../mt8183/mt8183-mt6358-ts3a227-max98357.c | 5 +- sound/soc/qcom/Kconfig | 12 + sound/soc/qcom/Makefile | 2 + sound/soc/qcom/sc7180.c | 270 ++++++++++++++++++ sound/soc/rockchip/rockchip_max98090.c | 3 +- 10 files changed, 425 insertions(+), 22 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/qcom,sc7180.yaml create mode 100644 sound/soc/qcom/sc7180.c -- 2.28.0.526.ge36021eeef-goog

2 5

[PATCH] soundwire: bus: add enumerated slave to device list
by Srinivas Kandagatla 11 Sep '20

11 Sep '20

Currently slave devices are only added either from device tree or acpi entries. However lets say, there is wrong or no entry of a slave device in DT that is enumerated, then there is no way for user to know all the enumerated devices on the bus. To fix this add slave device by default if there is no matching dt or acpi entry, so that we can see this in sysfs entry. In my case I had a wrong address entry in DT, However I had no way to know what devices are actually enumerated on the bus! Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> --- drivers/soundwire/bus.c | 1 + drivers/soundwire/bus.h | 2 ++ drivers/soundwire/bus_type.c | 6 ++++++ drivers/soundwire/slave.c | 4 ++-- 4 files changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c index e6e0fb9a81b4..55d9c22c4ec5 100644 --- a/drivers/soundwire/bus.c +++ b/drivers/soundwire/bus.c @@ -699,6 +699,7 @@ static int sdw_program_device_num(struct sdw_bus *bus) if (!found) { /* TODO: Park this device in Group 13 */ + sdw_slave_add(bus, &id, NULL); dev_err(bus->dev, "Slave Entry not found\n"); } diff --git a/drivers/soundwire/bus.h b/drivers/soundwire/bus.h index 82484f741168..1517d6789dff 100644 --- a/drivers/soundwire/bus.h +++ b/drivers/soundwire/bus.h @@ -19,6 +19,8 @@ static inline int sdw_acpi_find_slaves(struct sdw_bus *bus) int sdw_of_find_slaves(struct sdw_bus *bus); void sdw_extract_slave_id(struct sdw_bus *bus, u64 addr, struct sdw_slave_id *id); +int sdw_slave_add(struct sdw_bus *bus, struct sdw_slave_id *id, + struct fwnode_handle *fwnode); int sdw_master_device_add(struct sdw_bus *bus, struct device *parent, struct fwnode_handle *fwnode); int sdw_master_device_del(struct sdw_bus *bus); diff --git a/drivers/soundwire/bus_type.c b/drivers/soundwire/bus_type.c index 6fba55898cf0..ac036223046f 100644 --- a/drivers/soundwire/bus_type.c +++ b/drivers/soundwire/bus_type.c @@ -84,6 +84,12 @@ static int sdw_drv_probe(struct device *dev) const struct sdw_device_id *id; int ret; + /* + * fw description is mandatory to bind + */ + if (!dev->fwnode || !dev->of_node) + return -ENODEV; + id = sdw_get_device_id(slave, drv); if (!id) return -ENODEV; diff --git a/drivers/soundwire/slave.c b/drivers/soundwire/slave.c index 0839445ee07b..24a16ebf9ae2 100644 --- a/drivers/soundwire/slave.c +++ b/drivers/soundwire/slave.c @@ -20,8 +20,8 @@ struct device_type sdw_slave_type = { .uevent = sdw_slave_uevent, }; -static int sdw_slave_add(struct sdw_bus *bus, - struct sdw_slave_id *id, struct fwnode_handle *fwnode) +int sdw_slave_add(struct sdw_bus *bus, + struct sdw_slave_id *id, struct fwnode_handle *fwnode) { struct sdw_slave *slave; int ret; -- 2.21.0

3 8

[PATCH v2 0/2] ASoC: dt-bindings: audio-graph-card: switch to yaml base Documentation
by Kuninori Morimoto 10 Sep '20

10 Sep '20

Hi Rob, Mark These are v2 of switch to yaml base Documentation for audio-graph-card and renesas,rsnd which uses audio-graph-card. v1 -> v2 - upgrade dt-schema, and fixup errors for [2/2] patch Kuninori Morimoto (2): ASoC: dt-bindings: audio-graph-card: switch to yaml base Documentation ASoC: dt-bindings: renesas,rsnd: switch to yaml base Documentation .../bindings/sound/audio-graph-card.txt | 337 ------------ .../bindings/sound/audio-graph-card.yaml | 135 +++++ .../bindings/sound/renesas,rsnd.txt | 520 ------------------ .../bindings/sound/renesas,rsnd.yaml | 454 +++++++++++++++ .../devicetree/bindings/vendor-prefixes.yaml | 2 +- 5 files changed, 590 insertions(+), 858 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card.txt create mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card.yaml create mode 100644 Documentation/devicetree/bindings/sound/renesas,rsnd.yaml -- 2.25.1

2 6

[PATCH V6] ASoC: Intel: boards: Use FS as nau8825 sysclk in nau88125_* machine
by Radoslaw Biernacki 10 Sep '20

10 Sep '20

Since 256xFS clocks cannot be generated by SKL, the NAU8825 is configured to re-generate its system clock from the BCLK using the FLL. The link is configured to use a 48kHz frame rate, and 24 bits in 25-bit slot. The SSP configuration is extracted from NHLT settings and not dynamically changed. Listening tests and measurements do not show any distortion or issues Signed-off-by: John Hsu <KCHSU0(a)nuvoton.com> Signed-off-by: Yong Zhi <yong.zhi(a)intel.com> Signed-off-by: Mac Chiang <mac.chiang(a)intel.com> Signed-off-by: Ben Zhang <benzh(a)chromium.org> Signed-off-by: Radoslaw Biernacki <rad(a)semihalf.com> --- Notes: v1 -> v2: - adding same changes to skl_nau88l25_max98357a.c v2 -> v3: - removing msleep() in SNDRV_PCM_TRIGGER_RESUME as it unnecessarily increase playback/capture latency while actually FLL does not require it. - simplifing commit message v3 -> v4: - simplifing the PM resume callback code for setting the FLL - adding comment for the stream START/RESUME sequence which prevent audio pops - fixing mising var initialization in platform_clock_control() v4 -> v5: - removed stray change ~ SSP0 ops v5 -> v6: - fixing typos and comment style .../soc/intel/boards/skl_nau88l25_max98357a.c | 62 +++++++++++------- sound/soc/intel/boards/skl_nau88l25_ssm4567.c | 63 ++++++++++++------- 2 files changed, 83 insertions(+), 42 deletions(-) diff --git a/sound/soc/intel/boards/skl_nau88l25_max98357a.c b/sound/soc/intel/boards/skl_nau88l25_max98357a.c index d7b8154c43a4..12595138f44b 100644 --- a/sound/soc/intel/boards/skl_nau88l25_max98357a.c +++ b/sound/soc/intel/boards/skl_nau88l25_max98357a.c @@ -8,6 +8,7 @@ #include <linux/module.h> #include <linux/platform_device.h> +#include <linux/delay.h> #include <sound/core.h> #include <sound/jack.h> #include <sound/pcm.h> @@ -47,12 +48,12 @@ enum { }; static int platform_clock_control(struct snd_soc_dapm_widget *w, - struct snd_kcontrol *k, int event) + struct snd_kcontrol *k, int event) { struct snd_soc_dapm_context *dapm = w->dapm; struct snd_soc_card *card = dapm->card; struct snd_soc_dai *codec_dai; - int ret; + int ret = 0; codec_dai = snd_soc_card_get_codec_dai(card, SKL_NUVOTON_CODEC_DAI); if (!codec_dai) { @@ -60,14 +61,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, return -EIO; } - if (SND_SOC_DAPM_EVENT_ON(event)) { - ret = snd_soc_dai_set_sysclk(codec_dai, - NAU8825_CLK_MCLK, 24000000, SND_SOC_CLOCK_IN); - if (ret < 0) { - dev_err(card->dev, "set sysclk err = %d\n", ret); - return -EIO; - } - } else { + if (!SND_SOC_DAPM_EVENT_ON(event)) { ret = snd_soc_dai_set_sysclk(codec_dai, NAU8825_CLK_INTERNAL, 0, SND_SOC_CLOCK_IN); if (ret < 0) { @@ -292,24 +286,50 @@ static const struct snd_soc_ops skylake_nau8825_fe_ops = { .startup = skl_fe_startup, }; -static int skylake_nau8825_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) +static int skylake_nau8825_trigger(struct snd_pcm_substream *substream, int cmd) { struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_pcm_runtime *runtime = substream->runtime; struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); - int ret; - - ret = snd_soc_dai_set_sysclk(codec_dai, - NAU8825_CLK_MCLK, 24000000, SND_SOC_CLOCK_IN); - - if (ret < 0) - dev_err(rtd->dev, "snd_soc_dai_set_sysclk err = %d\n", ret); + int ret = 0; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + /* Since 256xFS clocks cannot be generated by SKL, the NAU8825 + * is configured to re-generate its system clock from the BCLK + * using the FLL. + * We must switch system clock (FLL to use BCLK) here as it is + * not given earlier by FW (like in hw_param). We let nau8825 to + * use internal VCO clock till now which reduces the audible + * pop's. + */ + case SNDRV_PCM_TRIGGER_RESUME: + /* Once device resumes, the system will only enable power + * sequence for playback without doing hardware parameter, audio + * format, and PLL configure. In the mean time, the jack + * detection sequence has changed PLL parameters and switched to + * internal clock. Thus, the playback signal distorted without + * correct PLL parameters. Therefore we need to configure PLL + * again + */ + ret = snd_soc_dai_set_sysclk(codec_dai, NAU8825_CLK_FLL_FS, 0, + SND_SOC_CLOCK_IN); + if (ret < 0) { + dev_err(codec_dai->dev, "can't set FS clock %d\n", ret); + break; + } + ret = snd_soc_dai_set_pll(codec_dai, 0, 0, runtime->rate, + runtime->rate * 256); + if (ret < 0) + dev_err(codec_dai->dev, "can't set FLL: %d\n", ret); + break; + } return ret; } -static const struct snd_soc_ops skylake_nau8825_ops = { - .hw_params = skylake_nau8825_hw_params, +static struct snd_soc_ops skylake_nau8825_ops = { + .trigger = skylake_nau8825_trigger, }; static int skylake_dmic_fixup(struct snd_soc_pcm_runtime *rtd, diff --git a/sound/soc/intel/boards/skl_nau88l25_ssm4567.c b/sound/soc/intel/boards/skl_nau88l25_ssm4567.c index 4b317bcf6ea0..38faaf20306e 100644 --- a/sound/soc/intel/boards/skl_nau88l25_ssm4567.c +++ b/sound/soc/intel/boards/skl_nau88l25_ssm4567.c @@ -12,6 +12,7 @@ #include <linux/module.h> #include <linux/platform_device.h> +#include <linux/delay.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/soc.h> @@ -57,12 +58,12 @@ static const struct snd_kcontrol_new skylake_controls[] = { }; static int platform_clock_control(struct snd_soc_dapm_widget *w, - struct snd_kcontrol *k, int event) + struct snd_kcontrol *k, int event) { struct snd_soc_dapm_context *dapm = w->dapm; struct snd_soc_card *card = dapm->card; struct snd_soc_dai *codec_dai; - int ret; + int ret = 0; codec_dai = snd_soc_card_get_codec_dai(card, SKL_NUVOTON_CODEC_DAI); if (!codec_dai) { @@ -70,14 +71,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, return -EIO; } - if (SND_SOC_DAPM_EVENT_ON(event)) { - ret = snd_soc_dai_set_sysclk(codec_dai, - NAU8825_CLK_MCLK, 24000000, SND_SOC_CLOCK_IN); - if (ret < 0) { - dev_err(card->dev, "set sysclk err = %d\n", ret); - return -EIO; - } - } else { + if (!SND_SOC_DAPM_EVENT_ON(event)) { ret = snd_soc_dai_set_sysclk(codec_dai, NAU8825_CLK_INTERNAL, 0, SND_SOC_CLOCK_IN); if (ret < 0) { @@ -85,6 +79,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, return -EIO; } } + return ret; } @@ -344,24 +339,50 @@ static int skylake_dmic_fixup(struct snd_soc_pcm_runtime *rtd, return 0; } -static int skylake_nau8825_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) +static int skylake_nau8825_trigger(struct snd_pcm_substream *substream, int cmd) { struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_pcm_runtime *runtime = substream->runtime; struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); - int ret; - - ret = snd_soc_dai_set_sysclk(codec_dai, - NAU8825_CLK_MCLK, 24000000, SND_SOC_CLOCK_IN); - - if (ret < 0) - dev_err(rtd->dev, "snd_soc_dai_set_sysclk err = %d\n", ret); + int ret = 0; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + /* Since 256xFS clocks cannot be generated by SKL, the NAU8825 + * is configured to re-generate its system clock from the BCLK + * using the FLL. + * We must switch system clock (FLL to use BCLK) here as it is + * not given earlier by FW (like in hw_param). We let nau8825 to + * use internal VCO clock till now which reduces the audible + * pop's. + */ + case SNDRV_PCM_TRIGGER_RESUME: + /* Once device resumes, the system will only enable power + * sequence for playback without doing hardware parameter, audio + * format, and PLL configure. In the mean time, the jack + * detection sequence has changed PLL parameters and switched to + * internal clock. Thus, the playback signal distorted without + * correct PLL parameters. Therefore we need to configure PLL + * again + */ + ret = snd_soc_dai_set_sysclk(codec_dai, NAU8825_CLK_FLL_FS, 0, + SND_SOC_CLOCK_IN); + if (ret < 0) { + dev_err(codec_dai->dev, "can't set FS clock %d\n", ret); + break; + } + ret = snd_soc_dai_set_pll(codec_dai, 0, 0, runtime->rate, + runtime->rate * 256); + if (ret < 0) + dev_err(codec_dai->dev, "can't set FLL: %d\n", ret); + break; + } return ret; } -static const struct snd_soc_ops skylake_nau8825_ops = { - .hw_params = skylake_nau8825_hw_params, +static struct snd_soc_ops skylake_nau8825_ops = { + .trigger = skylake_nau8825_trigger, }; static const unsigned int channels_dmic[] = { -- 2.17.1

2 1

[PATCH V4] ASoC: Intel: boards: Use FS as nau8825 sysclk in nau88125_* machine
by Radoslaw Biernacki 10 Sep '20

10 Sep '20

Since 256xFS clocks cannot be generated by SKL, the NAU8825 is configured to re-generate its system clock from the BCLK using the FLL. The link is configured to use a 48kHz frame rate, and 24 bits in 25-bit slot. The SSP configuration is extracted from NHLT settings and not dynamically changed. Listening tests and measurements do not show any distortion or issues Signed-off-by: John Hsu <KCHSU0(a)nuvoton.com> Signed-off-by: Yong Zhi <yong.zhi(a)intel.com> Signed-off-by: Mac Chiang <mac.chiang(a)intel.com> Signed-off-by: Ben Zhang <benzh(a)chromium.org> Signed-off-by: Radoslaw Biernacki <rad(a)semihalf.com> --- Notes: v1 -> v2: - adding same changes to skl_nau88l25_max98357a.c v2 -> v3: - removing msleep() in SNDRV_PCM_TRIGGER_RESUME as it unnecessarily increase playback/capture latency while actually FLL does not require it. - simplifing commit message v3 -> v4: - simplifing the PM resume callback code for setting the FLL - adding comment for the stream START/RESUME sequence which prevent audio pops - fixing mising var initialization in platform_clock_control() .../soc/intel/boards/skl_nau88l25_max98357a.c | 63 ++++++++++++------ sound/soc/intel/boards/skl_nau88l25_ssm4567.c | 65 +++++++++++++------ 2 files changed, 86 insertions(+), 42 deletions(-) diff --git a/sound/soc/intel/boards/skl_nau88l25_max98357a.c b/sound/soc/intel/boards/skl_nau88l25_max98357a.c index d7b8154c43a4..2f0abbd2dd8d 100644 --- a/sound/soc/intel/boards/skl_nau88l25_max98357a.c +++ b/sound/soc/intel/boards/skl_nau88l25_max98357a.c @@ -8,6 +8,7 @@ #include <linux/module.h> #include <linux/platform_device.h> +#include <linux/delay.h> #include <sound/core.h> #include <sound/jack.h> #include <sound/pcm.h> @@ -47,12 +48,12 @@ enum { }; static int platform_clock_control(struct snd_soc_dapm_widget *w, - struct snd_kcontrol *k, int event) + struct snd_kcontrol *k, int event) { struct snd_soc_dapm_context *dapm = w->dapm; struct snd_soc_card *card = dapm->card; struct snd_soc_dai *codec_dai; - int ret; + int ret = 0; codec_dai = snd_soc_card_get_codec_dai(card, SKL_NUVOTON_CODEC_DAI); if (!codec_dai) { @@ -60,14 +61,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, return -EIO; } - if (SND_SOC_DAPM_EVENT_ON(event)) { - ret = snd_soc_dai_set_sysclk(codec_dai, - NAU8825_CLK_MCLK, 24000000, SND_SOC_CLOCK_IN); - if (ret < 0) { - dev_err(card->dev, "set sysclk err = %d\n", ret); - return -EIO; - } - } else { + if (!SND_SOC_DAPM_EVENT_ON(event)) { ret = snd_soc_dai_set_sysclk(codec_dai, NAU8825_CLK_INTERNAL, 0, SND_SOC_CLOCK_IN); if (ret < 0) { @@ -292,24 +286,51 @@ static const struct snd_soc_ops skylake_nau8825_fe_ops = { .startup = skl_fe_startup, }; -static int skylake_nau8825_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) +static int skylake_nau8825_trigger(struct snd_pcm_substream *substream, int cmd) { struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_pcm_runtime *runtime = substream->runtime; struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); - int ret; - - ret = snd_soc_dai_set_sysclk(codec_dai, - NAU8825_CLK_MCLK, 24000000, SND_SOC_CLOCK_IN); - - if (ret < 0) - dev_err(rtd->dev, "snd_soc_dai_set_sysclk err = %d\n", ret); + int ret = 0; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + /* Since 256xFS clocks cannot be generated by SKL, the NAU8825 + * is configured to re-generate its system clock from the BCLK + * using the FLL. + * We must switch system clock (FLL to use BCLK) here as it is + * not given eariler by FW (like in hw_param). We let nau8825 to + * use internal VCO clock till now which reduces the audiable + * pop's. */ + + /* fall through */ + + case SNDRV_PCM_TRIGGER_RESUME: + /* Once device resumes, the system will only enable power + * sequence for playback without doing hardware parameter, audio + * format, and PLL configure. In the mean time, the jack + * detecion sequence has changed PLL parameters and switched to + * internal clock. Thus, the playback signal distorted without + * correct PLL parameters. Therefore we need to configure PLL + * again */ + ret = snd_soc_dai_set_sysclk(codec_dai, NAU8825_CLK_FLL_FS, 0, + SND_SOC_CLOCK_IN); + if (ret < 0) { + dev_err(codec_dai->dev, "can't set FS clock %d\n", ret); + break; + } + ret = snd_soc_dai_set_pll(codec_dai, 0, 0, runtime->rate, + runtime->rate * 256); + if (ret < 0) + dev_err(codec_dai->dev, "can't set FLL: %d\n", ret); + break; + } return ret; } -static const struct snd_soc_ops skylake_nau8825_ops = { - .hw_params = skylake_nau8825_hw_params, +static struct snd_soc_ops skylake_nau8825_ops = { + .trigger = skylake_nau8825_trigger, }; static int skylake_dmic_fixup(struct snd_soc_pcm_runtime *rtd, diff --git a/sound/soc/intel/boards/skl_nau88l25_ssm4567.c b/sound/soc/intel/boards/skl_nau88l25_ssm4567.c index 4b317bcf6ea0..d076f19f9b78 100644 --- a/sound/soc/intel/boards/skl_nau88l25_ssm4567.c +++ b/sound/soc/intel/boards/skl_nau88l25_ssm4567.c @@ -12,6 +12,7 @@ #include <linux/module.h> #include <linux/platform_device.h> +#include <linux/delay.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/soc.h> @@ -57,12 +58,12 @@ static const struct snd_kcontrol_new skylake_controls[] = { }; static int platform_clock_control(struct snd_soc_dapm_widget *w, - struct snd_kcontrol *k, int event) + struct snd_kcontrol *k, int event) { struct snd_soc_dapm_context *dapm = w->dapm; struct snd_soc_card *card = dapm->card; struct snd_soc_dai *codec_dai; - int ret; + int ret = 0; codec_dai = snd_soc_card_get_codec_dai(card, SKL_NUVOTON_CODEC_DAI); if (!codec_dai) { @@ -70,14 +71,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, return -EIO; } - if (SND_SOC_DAPM_EVENT_ON(event)) { - ret = snd_soc_dai_set_sysclk(codec_dai, - NAU8825_CLK_MCLK, 24000000, SND_SOC_CLOCK_IN); - if (ret < 0) { - dev_err(card->dev, "set sysclk err = %d\n", ret); - return -EIO; - } - } else { + if (!SND_SOC_DAPM_EVENT_ON(event)) { ret = snd_soc_dai_set_sysclk(codec_dai, NAU8825_CLK_INTERNAL, 0, SND_SOC_CLOCK_IN); if (ret < 0) { @@ -85,6 +79,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, return -EIO; } } + return ret; } @@ -344,24 +339,51 @@ static int skylake_dmic_fixup(struct snd_soc_pcm_runtime *rtd, return 0; } -static int skylake_nau8825_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) +static int skylake_nau8825_trigger(struct snd_pcm_substream *substream, int cmd) { struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_pcm_runtime *runtime = substream->runtime; struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); - int ret; - - ret = snd_soc_dai_set_sysclk(codec_dai, - NAU8825_CLK_MCLK, 24000000, SND_SOC_CLOCK_IN); - - if (ret < 0) - dev_err(rtd->dev, "snd_soc_dai_set_sysclk err = %d\n", ret); + int ret = 0; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + /* Since 256xFS clocks cannot be generated by SKL, the NAU8825 + * is configured to re-generate its system clock from the BCLK + * using the FLL. + * We must switch system clock (FLL to use BCLK) here as it is + * not given eariler by FW (like in hw_param). We let nau8825 to + * use internal VCO clock till now which reduces the audiable + * pop's. */ + + /* fall through */ + + case SNDRV_PCM_TRIGGER_RESUME: + /* Once device resumes, the system will only enable power + * sequence for playback without doing hardware parameter, audio + * format, and PLL configure. In the mean time, the jack + * detecion sequence has changed PLL parameters and switched to + * internal clock. Thus, the playback signal distorted without + * correct PLL parameters. Therefore we need to configure PLL + * again */ + ret = snd_soc_dai_set_sysclk(codec_dai, NAU8825_CLK_FLL_FS, 0, + SND_SOC_CLOCK_IN); + if (ret < 0) { + dev_err(codec_dai->dev, "can't set FS clock %d\n", ret); + break; + } + ret = snd_soc_dai_set_pll(codec_dai, 0, 0, runtime->rate, + runtime->rate * 256); + if (ret < 0) + dev_err(codec_dai->dev, "can't set FLL: %d\n", ret); + break; + } return ret; } -static const struct snd_soc_ops skylake_nau8825_ops = { - .hw_params = skylake_nau8825_hw_params, +static struct snd_soc_ops skylake_nau8825_ops = { + .trigger = skylake_nau8825_trigger, }; static const unsigned int channels_dmic[] = { @@ -582,6 +604,7 @@ static struct snd_soc_dai_link skylake_dais[] = { .init = skylake_ssm4567_codec_init, .ignore_pmdown_time = 1, .be_hw_params_fixup = skylake_ssp_fixup, + .ops = &skylake_nau8825_ops, .dpcm_playback = 1, .dpcm_capture = 1, SND_SOC_DAILINK_REG(ssp0_pin, ssp0_codec, platform), -- 2.17.1

3 3

[PATCH V5] ASoC: Intel: boards: Use FS as nau8825 sysclk in nau88125_* machine
by Radoslaw Biernacki 10 Sep '20

10 Sep '20

Since 256xFS clocks cannot be generated by SKL, the NAU8825 is configured to re-generate its system clock from the BCLK using the FLL. The link is configured to use a 48kHz frame rate, and 24 bits in 25-bit slot. The SSP configuration is extracted from NHLT settings and not dynamically changed. Listening tests and measurements do not show any distortion or issues Signed-off-by: John Hsu <KCHSU0(a)nuvoton.com> Signed-off-by: Yong Zhi <yong.zhi(a)intel.com> Signed-off-by: Mac Chiang <mac.chiang(a)intel.com> Signed-off-by: Ben Zhang <benzh(a)chromium.org> Signed-off-by: Radoslaw Biernacki <rad(a)semihalf.com> --- Notes: v1 -> v2: - adding same changes to skl_nau88l25_max98357a.c v2 -> v3: - removing msleep() in SNDRV_PCM_TRIGGER_RESUME as it unnecessarily increase playback/capture latency while actually FLL does not require it. - simplifing commit message v3 -> v4: - simplifing the PM resume callback code for setting the FLL - adding comment for the stream START/RESUME sequence which prevent audio pops - fixing mising var initialization in platform_clock_control() V4 -> V5: - removed stray change ~ SSP0 ops .../soc/intel/boards/skl_nau88l25_max98357a.c | 63 ++++++++++++------ sound/soc/intel/boards/skl_nau88l25_ssm4567.c | 64 +++++++++++++------ 2 files changed, 85 insertions(+), 42 deletions(-) diff --git a/sound/soc/intel/boards/skl_nau88l25_max98357a.c b/sound/soc/intel/boards/skl_nau88l25_max98357a.c index d7b8154c43a4..2f0abbd2dd8d 100644 --- a/sound/soc/intel/boards/skl_nau88l25_max98357a.c +++ b/sound/soc/intel/boards/skl_nau88l25_max98357a.c @@ -8,6 +8,7 @@ #include <linux/module.h> #include <linux/platform_device.h> +#include <linux/delay.h> #include <sound/core.h> #include <sound/jack.h> #include <sound/pcm.h> @@ -47,12 +48,12 @@ enum { }; static int platform_clock_control(struct snd_soc_dapm_widget *w, - struct snd_kcontrol *k, int event) + struct snd_kcontrol *k, int event) { struct snd_soc_dapm_context *dapm = w->dapm; struct snd_soc_card *card = dapm->card; struct snd_soc_dai *codec_dai; - int ret; + int ret = 0; codec_dai = snd_soc_card_get_codec_dai(card, SKL_NUVOTON_CODEC_DAI); if (!codec_dai) { @@ -60,14 +61,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, return -EIO; } - if (SND_SOC_DAPM_EVENT_ON(event)) { - ret = snd_soc_dai_set_sysclk(codec_dai, - NAU8825_CLK_MCLK, 24000000, SND_SOC_CLOCK_IN); - if (ret < 0) { - dev_err(card->dev, "set sysclk err = %d\n", ret); - return -EIO; - } - } else { + if (!SND_SOC_DAPM_EVENT_ON(event)) { ret = snd_soc_dai_set_sysclk(codec_dai, NAU8825_CLK_INTERNAL, 0, SND_SOC_CLOCK_IN); if (ret < 0) { @@ -292,24 +286,51 @@ static const struct snd_soc_ops skylake_nau8825_fe_ops = { .startup = skl_fe_startup, }; -static int skylake_nau8825_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) +static int skylake_nau8825_trigger(struct snd_pcm_substream *substream, int cmd) { struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_pcm_runtime *runtime = substream->runtime; struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); - int ret; - - ret = snd_soc_dai_set_sysclk(codec_dai, - NAU8825_CLK_MCLK, 24000000, SND_SOC_CLOCK_IN); - - if (ret < 0) - dev_err(rtd->dev, "snd_soc_dai_set_sysclk err = %d\n", ret); + int ret = 0; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + /* Since 256xFS clocks cannot be generated by SKL, the NAU8825 + * is configured to re-generate its system clock from the BCLK + * using the FLL. + * We must switch system clock (FLL to use BCLK) here as it is + * not given eariler by FW (like in hw_param). We let nau8825 to + * use internal VCO clock till now which reduces the audiable + * pop's. */ + + /* fall through */ + + case SNDRV_PCM_TRIGGER_RESUME: + /* Once device resumes, the system will only enable power + * sequence for playback without doing hardware parameter, audio + * format, and PLL configure. In the mean time, the jack + * detecion sequence has changed PLL parameters and switched to + * internal clock. Thus, the playback signal distorted without + * correct PLL parameters. Therefore we need to configure PLL + * again */ + ret = snd_soc_dai_set_sysclk(codec_dai, NAU8825_CLK_FLL_FS, 0, + SND_SOC_CLOCK_IN); + if (ret < 0) { + dev_err(codec_dai->dev, "can't set FS clock %d\n", ret); + break; + } + ret = snd_soc_dai_set_pll(codec_dai, 0, 0, runtime->rate, + runtime->rate * 256); + if (ret < 0) + dev_err(codec_dai->dev, "can't set FLL: %d\n", ret); + break; + } return ret; } -static const struct snd_soc_ops skylake_nau8825_ops = { - .hw_params = skylake_nau8825_hw_params, +static struct snd_soc_ops skylake_nau8825_ops = { + .trigger = skylake_nau8825_trigger, }; static int skylake_dmic_fixup(struct snd_soc_pcm_runtime *rtd, diff --git a/sound/soc/intel/boards/skl_nau88l25_ssm4567.c b/sound/soc/intel/boards/skl_nau88l25_ssm4567.c index 4b317bcf6ea0..6791be63c866 100644 --- a/sound/soc/intel/boards/skl_nau88l25_ssm4567.c +++ b/sound/soc/intel/boards/skl_nau88l25_ssm4567.c @@ -12,6 +12,7 @@ #include <linux/module.h> #include <linux/platform_device.h> +#include <linux/delay.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/soc.h> @@ -57,12 +58,12 @@ static const struct snd_kcontrol_new skylake_controls[] = { }; static int platform_clock_control(struct snd_soc_dapm_widget *w, - struct snd_kcontrol *k, int event) + struct snd_kcontrol *k, int event) { struct snd_soc_dapm_context *dapm = w->dapm; struct snd_soc_card *card = dapm->card; struct snd_soc_dai *codec_dai; - int ret; + int ret = 0; codec_dai = snd_soc_card_get_codec_dai(card, SKL_NUVOTON_CODEC_DAI); if (!codec_dai) { @@ -70,14 +71,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, return -EIO; } - if (SND_SOC_DAPM_EVENT_ON(event)) { - ret = snd_soc_dai_set_sysclk(codec_dai, - NAU8825_CLK_MCLK, 24000000, SND_SOC_CLOCK_IN); - if (ret < 0) { - dev_err(card->dev, "set sysclk err = %d\n", ret); - return -EIO; - } - } else { + if (!SND_SOC_DAPM_EVENT_ON(event)) { ret = snd_soc_dai_set_sysclk(codec_dai, NAU8825_CLK_INTERNAL, 0, SND_SOC_CLOCK_IN); if (ret < 0) { @@ -85,6 +79,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, return -EIO; } } + return ret; } @@ -344,24 +339,51 @@ static int skylake_dmic_fixup(struct snd_soc_pcm_runtime *rtd, return 0; } -static int skylake_nau8825_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) +static int skylake_nau8825_trigger(struct snd_pcm_substream *substream, int cmd) { struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_pcm_runtime *runtime = substream->runtime; struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); - int ret; - - ret = snd_soc_dai_set_sysclk(codec_dai, - NAU8825_CLK_MCLK, 24000000, SND_SOC_CLOCK_IN); - - if (ret < 0) - dev_err(rtd->dev, "snd_soc_dai_set_sysclk err = %d\n", ret); + int ret = 0; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + /* Since 256xFS clocks cannot be generated by SKL, the NAU8825 + * is configured to re-generate its system clock from the BCLK + * using the FLL. + * We must switch system clock (FLL to use BCLK) here as it is + * not given eariler by FW (like in hw_param). We let nau8825 to + * use internal VCO clock till now which reduces the audiable + * pop's. */ + + /* fall through */ + + case SNDRV_PCM_TRIGGER_RESUME: + /* Once device resumes, the system will only enable power + * sequence for playback without doing hardware parameter, audio + * format, and PLL configure. In the mean time, the jack + * detecion sequence has changed PLL parameters and switched to + * internal clock. Thus, the playback signal distorted without + * correct PLL parameters. Therefore we need to configure PLL + * again */ + ret = snd_soc_dai_set_sysclk(codec_dai, NAU8825_CLK_FLL_FS, 0, + SND_SOC_CLOCK_IN); + if (ret < 0) { + dev_err(codec_dai->dev, "can't set FS clock %d\n", ret); + break; + } + ret = snd_soc_dai_set_pll(codec_dai, 0, 0, runtime->rate, + runtime->rate * 256); + if (ret < 0) + dev_err(codec_dai->dev, "can't set FLL: %d\n", ret); + break; + } return ret; } -static const struct snd_soc_ops skylake_nau8825_ops = { - .hw_params = skylake_nau8825_hw_params, +static struct snd_soc_ops skylake_nau8825_ops = { + .trigger = skylake_nau8825_trigger, }; static const unsigned int channels_dmic[] = { -- 2.17.1

1 0