August 2020 - Alsa-devel - mailman.alsa-project.org

[PATCH] ALSA: hda/realtek - Fix unused variable warning
by Takashi Iwai 12 Aug '20

12 Aug '20

The previous fix forgot to remove the unused variable that triggers a compile warning now: sound/pci/hda/patch_realtek.c: In function 'alc285_fixup_hp_gpio_led': sound/pci/hda/patch_realtek.c:4163:19: warning: unused variable 'spec' [-Wunused-variable] Fix it. Fixes: 404690649e6a ("ALSA: hda - reverse the setting value in the micmute_led_set") Reported-by: Stephen Rothwell <sfr(a)canb.auug.org.au> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/pci/hda/patch_realtek.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 073029aeaf3c..7f9d35273734 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -4160,8 +4160,6 @@ static void alc269_fixup_hp_gpio_led(struct hda_codec *codec, static void alc285_fixup_hp_gpio_led(struct hda_codec *codec, const struct hda_fixup *fix, int action) { - struct alc_spec *spec = codec->spec; - alc_fixup_hp_gpio_led(codec, action, 0x04, 0x01); } -- 2.16.4

1 0

[PATCH] conf: USB-Audio: Disable IEC958 on Lenovo ThinkStation P620
by Kai-Heng Feng 12 Aug '20

12 Aug '20

Both USB audio cards on Lenovo ThinkStation P620 don't support IEC958, so disable IEC958 accordingly. Signed-off-by: Kai-Heng Feng <kai.heng.feng(a)canonical.com> --- src/conf/cards/USB-Audio.conf | 2 ++ 1 file changed, 2 insertions(+) diff --git a/src/conf/cards/USB-Audio.conf b/src/conf/cards/USB-Audio.conf index 297629f3..9b64af3c 100644 --- a/src/conf/cards/USB-Audio.conf +++ b/src/conf/cards/USB-Audio.conf @@ -63,6 +63,8 @@ USB-Audio.pcm.iec958_device { "Scarlett 2i4 USB" 999 "Sennheiser USB headset" 999 "SWTOR Gaming Headset by Razer" 999 + "ThinkStation P620 Main" 999 + "ThinkStation P620 Rear" 999 "Thunderbolt Dock Audio Headset" 999 "Thunderbolt Dock Audio Module" 999 "USB Device 0x46d_0x821" 999 -- 2.17.1

2 4

[PATCH v3 00/13] ASoC: Intel: Catpt - Lynx and Wildcat point
by Cezary Rojewski 12 Aug '20

12 Aug '20

Implement support for Lynxpoint and Wildcat Point AudioDSP. Catpt solution deprecates existing sound/soc/intel/haswell which is removed in the following series. This cover-letter is followed by 'Developer's deep dive' message schedding light on catpt's key concepts and areas addressed. Due to high range of errors and desynchronization from recommendations set by Windows solution, re-write came as a lower-cost solution compared to refactoring /haswell/ with several series of patches. Special thanks go to Marcin Barlik and Piotr Papierkowski for sharing their LPT/WPT AudioDSP architecture expertise as well as helping backtrack its historical background. My thanks go to Amadeusz Slawinski for reviews and improvements proposed on and off the internal list. Most of internal diff below is his contribution. Krzysztof Hejmowski helped me setup my own Xtensa environment and recompile LPT/WPT FW binary sources what sped up the development greatly. This would not have been possible without help from these champions, especially considering how quickly the catpt was written: 2 weeks features, 3 weeks optimizations. Thank you. Userspace-exposed members are compatible with what is exposed by deprecated solution as well as FW binary being re-used thus no harm is done. The only visible differences are: the newly added 'Loopback Mute' kcontrol and volume support extending to quad from stereo. On top of fixing erros and design flows, catpt also adds module reload, dynamic SRAM memory allocation during PCM runtime and exposes missing userspace API: 'Loopback Mute' kcontrol, quad volume controls and sysfs fw-version entries. Event tracing is provided to easy solution debugging. Following are not included in this update and are scheduled as later addition: - fw logging - module (library) support Note: LPT power up/down sequences might get aligned with WPT once enough testing is done as capabilities are shared for both DSPs. Note #2: Both LPT and WPT power up/down sequences may get optimized in future updates as thanks to help from the Windows team, most of nuances behind why/what/when in regard to hw registers have been backtracked and reviewed again. Link to developer's deep dive message: https://www.spinics.net/lists/alsa-devel/msg113563.html Changes in v3: - fixed IRAM mask usage in lpt_dsp_power_up (dsp.c) - updated dbg message formatting in catpt_restore_fwimage as suggested by Andy - fixed alignment for struct catpt_ssp_device_format - catpt_set_ctlvol now verifies all-equal scenario based on all channels rather than just first two as requested by Amadeo - fixed SPDX for registers.h Changes in v2: - fixed SPDX formatting for all header files as well as pcm.c - fixed size used when memcping fs.c::fw_build_read as reported by Mark - renamed struct catpt_pdata to struct catpt_spec (cosmetic) - fixed erroneous path in catpt_load_block: region is properly released - trace.h events for updating registers have been removed and usages replaced by dev_dbg (SRAMPGE/ LPCS) - as requested by Andy, struct resource has replaced struct catpt_mbank and struct catpt_mregion. This change cascaded into: - catpt_mbank_size and catpt_mregion_size replaced by resource_size - catpt_mregion_intersects replaced by resource_overlaps - all catpt_mbank_ and catpt_mregion_ handlers found in loader.c (_request, _reserve, _release, _extract, _split, _join) have been removed - __request_region and __release_region have been enlisted in their place - catpt_mregion_intersecting renamed to catpt_resource_overlapping - catpt_request_region helper has been provided to deal with -size based requests o haven't found direct replacements in resource.c/ ioport.h for both functions - catpt_mbank_create and catpt_mbank_remove renamed to catpt_sram_init and catpt_sram_free respectively - catpt_sram_init now returns void instead of int and has been converted to simple initialized. This change ultimately cascaded into: o both SRAM banks initialization being moved to catpt_dev_init from catpt_acpi_probe (device.c) o catpt_dev::spec is now initialized first, with catpt_dev_init following it soon after o catpt_acpi_probe erroneous path has been simplified as SRAM banks no longer need to be freed - catpt_sram_free now frees all resources via child -> sibling enumeration rather than region_list iteration - catpt_dsp_update_srampge and catpt_dsp_set_srampge now accept new argument: unsigned long mask. Caused by removal of catpt_mbank - mask is taken directly from catpt_dev::spec::d/iram_mask - trace.h events for catpt_mbank and catpt_mregion have been removed Diff against last drop on internal list: - replaced spinlock with mutex for mregion allocation and release to address sleeping in atomic context warnings - fixed coredump fw_hash dumping - kcontrol values are now always stored regardless of stream of interest is running or not - kcontrol values are now applied after stream is prepared instead of ignoring what has been set by user initially - catpt_pdata instances have been renamed from hsw_ and bdw_ to lpt_ and wpt_ respectively - reordered Makefile .o(s) (cosmetic) Cezary Rojewski (13): ASoC: Intel: Add catpt device ASoC: Intel: catpt: Define DSP operations ASoC: Intel: catpt: Firmware loading and context restore ASoC: Intel: catpt: Implement IPC protocol ASoC: Intel: catpt: Add IPC messages ASoC: Intel: catpt: PCM operations ASoC: Intel: catpt: Event tracing ASoC: Intel: catpt: Simple sysfs attributes ASoC: Intel: Select catpt and deprecate haswell ASoC: Intel: haswell: Remove haswell-solution specific code ASoC: Intel: broadwell: Remove haswell-solution specific code ASoC: Intel: bdw-5650: Remove haswell-solution specific code ASoC: Intel: bdw-5677: Remove haswell-solution specific code sound/soc/intel/Kconfig | 22 +- sound/soc/intel/Makefile | 2 +- sound/soc/intel/boards/Kconfig | 8 +- sound/soc/intel/boards/bdw-rt5650.c | 36 - sound/soc/intel/boards/bdw-rt5677.c | 33 - sound/soc/intel/boards/broadwell.c | 33 - sound/soc/intel/boards/haswell.c | 28 +- sound/soc/intel/catpt/Makefile | 6 + sound/soc/intel/catpt/core.h | 187 +++++ sound/soc/intel/catpt/device.c | 376 +++++++++ sound/soc/intel/catpt/dsp.c | 596 +++++++++++++ sound/soc/intel/catpt/fs.c | 79 ++ sound/soc/intel/catpt/ipc.c | 298 +++++++ sound/soc/intel/catpt/loader.c | 673 +++++++++++++++ sound/soc/intel/catpt/messages.c | 312 +++++++ sound/soc/intel/catpt/messages.h | 401 +++++++++ sound/soc/intel/catpt/pcm.c | 1198 +++++++++++++++++++++++++++ sound/soc/intel/catpt/registers.h | 191 +++++ sound/soc/intel/catpt/trace.h | 83 ++ 19 files changed, 4420 insertions(+), 142 deletions(-) create mode 100644 sound/soc/intel/catpt/Makefile create mode 100644 sound/soc/intel/catpt/core.h create mode 100644 sound/soc/intel/catpt/device.c create mode 100644 sound/soc/intel/catpt/dsp.c create mode 100644 sound/soc/intel/catpt/fs.c create mode 100644 sound/soc/intel/catpt/ipc.c create mode 100644 sound/soc/intel/catpt/loader.c create mode 100644 sound/soc/intel/catpt/messages.c create mode 100644 sound/soc/intel/catpt/messages.h create mode 100644 sound/soc/intel/catpt/pcm.c create mode 100644 sound/soc/intel/catpt/registers.h create mode 100644 sound/soc/intel/catpt/trace.h -- 2.17.1

2 14

[PATCH v2 00/13] ASoC: Intel: Catpt - Lynx and Wildcat point
by Cezary Rojewski 11 Aug '20

11 Aug '20

Implement support for Lynxpoint and Wildcat Point AudioDSP. Catpt solution deprecates existing sound/soc/intel/haswell which is removed in the following series. This cover-letter is followed by 'Developer's deep dive' message schedding light on catpt's key concepts and areas addressed. Due to high range of errors and desynchronization from recommendations set by Windows solution, re-write came as a lower-cost solution compared to refactoring /haswell/ with several series of patches. Special thanks go to Marcin Barlik and Piotr Papierkowski for sharing their LPT/WPT AudioDSP architecture expertise as well as helping backtrack its historical background. My thanks go to Amadeusz Slawinski for reviews and improvements proposed on and off the internal list. Most of internal diff below is his contribution. Krzysztof Hejmowski helped me setup my own Xtensa environment and recompile LPT/WPT FW binary sources what sped up the development greatly. This would not have been possible without help from these champions, especially considering how quickly the catpt was written: 2 weeks features, 3 weeks optimizations. Thank you. Userspace-exposed members are compatible with what is exposed by deprecated solution as well as FW binary being re-used thus no harm is done. The only visible differences are: the newly added 'Loopback Mute' kcontrol and volume support extending to quad from stereo. On top of fixing erros and design flows, catpt also adds module reload, dynamic SRAM memory allocation during PCM runtime and exposes missing userspace API: 'Loopback Mute' kcontrol, quad volume controls and sysfs fw-version entries. Event tracing is provided to easy solution debugging. Following are not included in this update and are scheduled as later addition: - fw logging - module (library) support Note: LPT power up/down sequences might get aligned with WPT once enough testing is done as capabilities are shared for both DSPs. Note #2: Both LPT and WPT power up/down sequences may get optimized in future updates as thanks to help from the Windows team, most of nuances behind why/what/when in regard to hw registers have been backtracked and reviewed again. Link to developer's deep dive message: https://www.spinics.net/lists/alsa-devel/msg113563.html Changes in v2: - fixed SPDX formatting for all header files as well as pcm.c - fixed size used when memcping fs.c::fw_build_read as reported by Mark - renamed struct catpt_pdata to struct catpt_spec (cosmetic) - fixed erroneous patch in catpt_load_block: region if properly released - trace.h events for updating registers have been removed and usages replaced by dev_dbg (SRAMPGE/ LPCS) - as requested by Andy, struct resource has replaced struct catpt_mbank and struct catpt_mregion. This change cascaded into: - catpt_mbank_size and catpt_mregion_size replaced by resource_size - catpt_mregion_intersects replaced by resource_overlaps - all catpt_mbank_ and catpt_mregion_ handlers found in loader.c (_request, _reserve, _release, _extract, _split, _join) have been removed - __request_region and __release_region have been enlisted in their place - catpt_mregion_intersecting renamed to catpt_resource_overlapping - catpt_request_region helper has been provided to deal with -size based requests o haven't found direct replacements in resource.c/ ioport.h for both functions - catpt_mbank_create and catpt_mbank_remove renamed to catpt_sram_init and catpt_sram_free respectively - catpt_sram_init now returns void instead of int and has been converted to simple initialized. This change ultimately cascaded into: o both SRAM banks initialization being moved to catpt_dev_init from catpt_acpi_probe (device.c) o catpt_dev::spec is now initialized first, with catpt_dev_init following it soon after o catpt_acpi_probe erroneous path has been simplified as SRAM banks no longer need to be freed - catpt_sram_free now frees all resources via child -> sibling enumeration rather than region_list iteration - catpt_dsp_update_srampge and catpt_dsp_set_srampge now accept new argument: unsigned long mask. Caused by removal of catpt_mbank - mask is taken directly from catpt_dev::spec::d/iram_mask - trace.h events for catpt_mbank and catpt_mregion have been removed Diff against last drop on internal list: - replaced spinlock with mutex for mregion allocation and release to address sleeping in atomic context warnings - fixed coredump fw_hash dumping - kcontrol values are now always stored regardless of stream of interest is running or not - kcontrol values are now applied after stream is prepared instead of ignoring what has been set by user initially - catpt_pdata instances have been renamed from hsw_ and bdw_ to lpt_ and wpt_ respectively - reordered Makefile .o(s) (cosmetic) Cezary Rojewski (13): ASoC: Intel: Add catpt device ASoC: Intel: catpt: Define DSP operations ASoC: Intel: catpt: Firmware loading and context restore ASoC: Intel: catpt: Implement IPC protocol ASoC: Intel: catpt: Add IPC messages ASoC: Intel: catpt: PCM operations ASoC: Intel: catpt: Event tracing ASoC: Intel: catpt: Simple sysfs attributes ASoC: Intel: Select catpt and deprecate haswell ASoC: Intel: haswell: Remove haswell-solution specific code ASoC: Intel: broadwell: Remove haswell-solution specific code ASoC: Intel: bdw-5650: Remove haswell-solution specific code ASoC: Intel: bdw-5677: Remove haswell-solution specific code sound/soc/intel/Kconfig | 22 +- sound/soc/intel/Makefile | 2 +- sound/soc/intel/boards/Kconfig | 8 +- sound/soc/intel/boards/bdw-rt5650.c | 36 - sound/soc/intel/boards/bdw-rt5677.c | 33 - sound/soc/intel/boards/broadwell.c | 33 - sound/soc/intel/boards/haswell.c | 28 +- sound/soc/intel/catpt/Makefile | 6 + sound/soc/intel/catpt/core.h | 187 +++++ sound/soc/intel/catpt/device.c | 376 +++++++++ sound/soc/intel/catpt/dsp.c | 596 +++++++++++++ sound/soc/intel/catpt/fs.c | 79 ++ sound/soc/intel/catpt/ipc.c | 298 +++++++ sound/soc/intel/catpt/loader.c | 676 +++++++++++++++ sound/soc/intel/catpt/messages.c | 312 +++++++ sound/soc/intel/catpt/messages.h | 401 +++++++++ sound/soc/intel/catpt/pcm.c | 1194 +++++++++++++++++++++++++++ sound/soc/intel/catpt/registers.h | 191 +++++ sound/soc/intel/catpt/trace.h | 83 ++ 19 files changed, 4419 insertions(+), 142 deletions(-) create mode 100644 sound/soc/intel/catpt/Makefile create mode 100644 sound/soc/intel/catpt/core.h create mode 100644 sound/soc/intel/catpt/device.c create mode 100644 sound/soc/intel/catpt/dsp.c create mode 100644 sound/soc/intel/catpt/fs.c create mode 100644 sound/soc/intel/catpt/ipc.c create mode 100644 sound/soc/intel/catpt/loader.c create mode 100644 sound/soc/intel/catpt/messages.c create mode 100644 sound/soc/intel/catpt/messages.h create mode 100644 sound/soc/intel/catpt/pcm.c create mode 100644 sound/soc/intel/catpt/registers.h create mode 100644 sound/soc/intel/catpt/trace.h -- 2.17.1

5 24

[PATCH] ALSA: hda - reverse the setting value in the micmute_led_set
by Hui Wang 11 Aug '20

11 Aug '20

Before the micmute_led_set() is introduced, the function of alc_gpio_micmute_update() will set the gpio value with the !micmute_led.led_value, and the machines have the correct micmute led status. After the micmute_led_set() is introduced, it sets the gpio value with !!micmute_led.led_value, so the led status is not correct anymore, we need to set micmute_led_polarity = 1 to workaround it. Now we fix the micmute_led_set() and remove micmute_led_polarity = 1. Fixes: 87dc36482cab ("ALSA: hda/realtek - Add LED class support for micmute LED") Reported-and-suggested-by: Kai-Heng Feng <kai.heng.feng(a)canonical.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Hui Wang <hui.wang(a)canonical.com> --- sound/pci/hda/patch_realtek.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 09d93dd88713..073029aeaf3c 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -4125,7 +4125,7 @@ static int micmute_led_set(struct led_classdev *led_cdev, struct alc_spec *spec = codec->spec; alc_update_gpio_led(codec, spec->gpio_mic_led_mask, - spec->micmute_led_polarity, !!brightness); + spec->micmute_led_polarity, !brightness); return 0; } @@ -4162,8 +4162,6 @@ static void alc285_fixup_hp_gpio_led(struct hda_codec *codec, { struct alc_spec *spec = codec->spec; - spec->micmute_led_polarity = 1; - alc_fixup_hp_gpio_led(codec, action, 0x04, 0x01); } @@ -4414,7 +4412,6 @@ static void alc233_fixup_lenovo_line2_mic_hotkey(struct hda_codec *codec, { struct alc_spec *spec = codec->spec; - spec->micmute_led_polarity = 1; alc_fixup_hp_gpio_led(codec, action, 0, 0x04); if (action == HDA_FIXUP_ACT_PRE_PROBE) { spec->init_amp = ALC_INIT_DEFAULT; -- 2.17.1

2 1

[PATCH] ALSA: hda - fix the micmute led status for Lenovo ThinkCentre AIO
by Hui Wang 11 Aug '20

11 Aug '20

After installing the Ubuntu Linux, the micmute led status is not correct. Users expect that the led is on if the capture is disabled, but with the current kernel, the led is off with the capture disabled. We tried the old linux kernel like linux-4.15, there is no this issue. It looks like we introduced this issue when switching to the led_cdev. Cc: <stable(a)vger.kernel.org> Signed-off-by: Hui Wang <hui.wang(a)canonical.com> --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index daedcc0adc21..09d93dd88713 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -4414,6 +4414,7 @@ static void alc233_fixup_lenovo_line2_mic_hotkey(struct hda_codec *codec, { struct alc_spec *spec = codec->spec; + spec->micmute_led_polarity = 1; alc_fixup_hp_gpio_led(codec, action, 0, 0x04); if (action == HDA_FIXUP_ACT_PRE_PROBE) { spec->init_amp = ALC_INIT_DEFAULT; -- 2.17.1

3 8

[PATCH 1/2] ASoC: q6afe-dai: add dummy register read function
by Srinivas Kandagatla 11 Aug '20

11 Aug '20

Most of the DAPM widgets for DSP ASoC components reuse reg field of the widgets for its internal calculations, however these are not real registers. So read/writes to these numbers are not really valid. However ASoC core will read these registers to get default state during startup. With recent changes to ASoC core, every register read/write failures are reported very verbosely. Prior to this fails to reads are totally ignored, so we never saw any error messages. To fix this add dummy read function to return default value. Reported-by: John Stultz <john.stultz(a)linaro.org> Fixes: 24c4cbcfac09 ("ASoC: qdsp6: q6afe: Add q6afe dai driver") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> --- sound/soc/qcom/qdsp6/q6afe-dai.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/sound/soc/qcom/qdsp6/q6afe-dai.c b/sound/soc/qcom/qdsp6/q6afe-dai.c index 2a5302f1db98..492bdbaf13c4 100644 --- a/sound/soc/qcom/qdsp6/q6afe-dai.c +++ b/sound/soc/qcom/qdsp6/q6afe-dai.c @@ -1352,6 +1352,13 @@ static const struct snd_soc_dapm_widget q6afe_dai_widgets[] = { SND_SOC_DAPM_AIF_OUT("DISPLAY_PORT_RX", "NULL", 0, 0, 0, 0), }; +static unsigned int q6afe_reg_read(struct snd_soc_component *component, + unsigned int reg) +{ + /* default value */ + return 0; +} + static const struct snd_soc_component_driver q6afe_dai_component = { .name = "q6afe-dai-component", .dapm_widgets = q6afe_dai_widgets, @@ -1359,7 +1366,7 @@ static const struct snd_soc_component_driver q6afe_dai_component = { .dapm_routes = q6afe_dapm_routes, .num_dapm_routes = ARRAY_SIZE(q6afe_dapm_routes), .of_xlate_dai_name = q6afe_of_xlate_dai_name, - + .read = q6afe_reg_read, }; static void of_q6afe_parse_dai_data(struct device *dev, -- 2.21.0

3 4

[PATCH v5 00/12] ASoC: qcom: Add support for SC7180 lpass variant
by Rohit kumar 11 Aug '20

11 Aug '20

This patch chain add audio support for SC7180 soc by doing the required modification in existing common lpass-cpu/lpass-platform driver. This also fixes some concurrency issue. This patch series is already tested by Srinivas on Dragon Board 410c. Changes since v4: - Updated compatible string for sc7180 lpass cpu as suggested by Rob - Addressed comments by Rob in yaml Documentation. Ajit Pandey (4): ASoC: qcom: Add common array to initialize soc based core clocks ASoC: qcom: lpass-platform: Replace card->dev with component->dev include: dt-bindings: sound: Add sc7180-lpass bindings header ASoC: qcom: lpass-sc7180: Add platform driver for lpass audio Rohit kumar (8): ASoC: qcom: lpass-cpu: Move ahbix clk to platform specific function ASoC: qcom: lpass-platform: fix memory leak ASoC: qcom: lpass: Use regmap_field for i2sctl and dmactl registers ASoC: qcom: lpass-cpu: fix concurrency issue dt-bindings: sound: lpass-cpu: Add sc7180 lpass cpu node ASoC: qcom: lpass-cpu: Use platform_get_resource ASoC: qcom: lpass-platform: Use platform_get_irq dt-bindings: sound: lpass-cpu: Move to yaml format .../devicetree/bindings/sound/qcom,lpass-cpu.txt | 79 -------- .../devicetree/bindings/sound/qcom,lpass-cpu.yaml | 179 +++++++++++++++++ include/dt-bindings/sound/sc7180-lpass.h | 10 + sound/soc/qcom/Kconfig | 5 + sound/soc/qcom/Makefile | 2 + sound/soc/qcom/lpass-apq8016.c | 86 ++++++-- sound/soc/qcom/lpass-cpu.c | 204 ++++++++++--------- sound/soc/qcom/lpass-ipq806x.c | 67 +++++++ sound/soc/qcom/lpass-lpaif-reg.h | 157 ++++++++------- sound/soc/qcom/lpass-platform.c | 155 +++++++++++---- sound/soc/qcom/lpass-sc7180.c | 216 +++++++++++++++++++++ sound/soc/qcom/lpass.h | 63 +++++- 12 files changed, 924 insertions(+), 299 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt create mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml create mode 100644 include/dt-bindings/sound/sc7180-lpass.h create mode 100644 sound/soc/qcom/lpass-sc7180.c -- Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc., is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.

3 17

[PATCH 00/13] ASoC: Intel: Catpt - Lynx and Wildcat point
by Cezary Rojewski 11 Aug '20

11 Aug '20

Implement support for Lynxpoint and Wildcat Point AudioDSP. Catpt solution deprecates existing sound/soc/intel/haswell which is removed in the following series. This cover-letter is followed by 'Developer's deep dive' message schedding light on catpt's key concepts and areas addressed. Due to high range of errors and desynchronization from recommendations set by Windows solution, re-write came as a lower-cost solution compared to refactoring /haswell/ with several series of patches. Special thanks go to Marcin Barlik and Piotr Papierkowski for sharing their LPT/WPT AudioDSP architecture expertise as well as helping backtrack its historical background. My thanks go to Amadeusz Slawinski for reviews and improvements proposed on and off the internal list. Most of diff below is his contribution. Krzysztof Hejmowski helped me setup my own Xtensa environment and recompile LPT/WPT FW binary sources what sped up the development greatly. This would not have been possible without help from these champions, especially considering how quickly the catpt was written: 2 weeks features, 3 weeks optimizations. Thank you. Diff against last drop on internal list: - replaced spinlock with mutex for mregion allocation and release to address sleeping in atomic context warnings - fixed coredump fw_hash dumping - kcontrol values are now always stored regardless of stream of interest is running or not - kcontrol values are now applied after stream is prepared instead of ignoring what has been set by user initially - catpt_pdata instances have been renamed from hsw_ and bdw_ to lpt_ and wpt_ respectively - reordered Makefile .o(s) (cosmetic) Userspace-exposed members are compatible with what is exposed by deprecated solution as well as FW binary being re-used thus no harm is done. The only visible differences are: the newly added 'Loopback Mute' kcontrol and volume support extending to quad from stereo. On top of fixing erros and design flows, catpt also adds module reload, dynamic SRAM memory allocation during PCM runtime and exposes missing userspace API: 'Loopback Mute' kcontrol, quad volume controls and sysfs fw-version entries. Event tracing is provided to easy solution debugging. Following are not included in this update and are scheduled as later addition: - fw logging - module (library) support Note: LPT power up/down sequences might get aligned with WPT once enough testing is done as capabilities are shared for both DSPs. Note #2: Both LPT and WPT power up/down sequences may get optimized in future updates as thanks to help from the Windows team, most of nuances behind why/what/when in regard to hw registers have been backtracked and reviewed again. Cezary Rojewski (13): ASoC: Intel: Add catpt device ASoC: Intel: catpt: Define DSP operations ASoC: Intel: catpt: Firmware loading and context restore ASoC: Intel: catpt: Implement IPC protocol ASoC: Intel: catpt: Add IPC messages ASoC: Intel: catpt: PCM operations ASoC: Intel: catpt: Event tracing ASoC: Intel: catpt: Simple sysfs attributes ASoC: Intel: Select catpt and deprecate haswell ASoC: Intel: haswell: Remove haswell-solution specific code ASoC: Intel: broadwell: Remove haswell-solution specific code ASoC: Intel: bdw-5650: Remove haswell-solution specific code ASoC: Intel: bdw-5677: Remove haswell-solution specific code sound/soc/intel/Kconfig | 22 +- sound/soc/intel/Makefile | 2 +- sound/soc/intel/boards/Kconfig | 8 +- sound/soc/intel/boards/bdw-rt5650.c | 36 - sound/soc/intel/boards/bdw-rt5677.c | 33 - sound/soc/intel/boards/broadwell.c | 33 - sound/soc/intel/boards/haswell.c | 28 +- sound/soc/intel/catpt/Makefile | 6 + sound/soc/intel/catpt/core.h | 224 +++++ sound/soc/intel/catpt/device.c | 389 +++++++++ sound/soc/intel/catpt/dsp.c | 590 +++++++++++++ sound/soc/intel/catpt/fs.c | 79 ++ sound/soc/intel/catpt/ipc.c | 298 +++++++ sound/soc/intel/catpt/loader.c | 837 +++++++++++++++++++ sound/soc/intel/catpt/messages.c | 312 +++++++ sound/soc/intel/catpt/messages.h | 402 +++++++++ sound/soc/intel/catpt/pcm.c | 1194 +++++++++++++++++++++++++++ sound/soc/intel/catpt/registers.h | 191 +++++ sound/soc/intel/catpt/trace.h | 169 ++++ 19 files changed, 4711 insertions(+), 142 deletions(-) create mode 100644 sound/soc/intel/catpt/Makefile create mode 100644 sound/soc/intel/catpt/core.h create mode 100644 sound/soc/intel/catpt/device.c create mode 100644 sound/soc/intel/catpt/dsp.c create mode 100644 sound/soc/intel/catpt/fs.c create mode 100644 sound/soc/intel/catpt/ipc.c create mode 100644 sound/soc/intel/catpt/loader.c create mode 100644 sound/soc/intel/catpt/messages.c create mode 100644 sound/soc/intel/catpt/messages.h create mode 100644 sound/soc/intel/catpt/pcm.c create mode 100644 sound/soc/intel/catpt/registers.h create mode 100644 sound/soc/intel/catpt/trace.h -- 2.17.1

4 23

USB audio cuts 2-3 secs at start
by Stuart Naylor 11 Aug '20

11 Aug '20

http://alsa-project.org/db/?f=6b107178c9939f235a390c07cb5c1f71d6a6e0c0 Its an Anker power conf and for some reason the first couple of seconds of aplay do not play via USB. Alsa-info above anyone and tips or ideas? Stuart

2 2