Added mixer quirks to allow controlling the internal DSP of the
RME Babyface Pro and its successor Babyface Pro FS.
v2 fixes the initially wrong upper limit of the volume control.
Signed-off-by: Thomas Ebeling <penguins(a)bollie.de>
---
sound/usb/mixer_quirks.c | 418 +++++++++++++++++++++++++++++++++++++++
1 file changed, 418 insertions(+)
diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c
index a5f65a9a0254..aad2683ff793 100644
--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -2185,6 +2185,421 @@ static int snd_rme_controls_create(struct usb_mixer_interface *mixer)
return 0;
}
+/*
+ * RME Babyface Pro (FS)
+ *
+ * These devices exposes a couple of DSP functions via request to EP0.
+ * Switches are available via control registers, while routing is controlled
+ * by controlling the volume on each possible crossing point.
+ * Volume control is linear, from -inf (dec. 0) to +6dB (dec. 65536) with
+ * 0dB being at dec. 32768.
+ */
+enum {
+ SND_BBFPRO_CTL_REG1 = 0,
+ SND_BBFPRO_CTL_REG2
+};
+
+#define SND_BBFPRO_CTL_REG_MASK 1
+#define SND_BBFPRO_CTL_IDX_MASK 0xff
+#define SND_BBFPRO_CTL_IDX_SHIFT 1
+#define SND_BBFPRO_CTL_VAL_MASK 1
+#define SND_BBFPRO_CTL_VAL_SHIFT 9
+#define SND_BBFPRO_CTL_REG1_CLK_MASTER 0
+#define SND_BBFPRO_CTL_REG1_CLK_OPTICAL 1
+#define SND_BBFPRO_CTL_REG1_SPDIF_PRO 7
+#define SND_BBFPRO_CTL_REG1_SPDIF_EMPH 8
+#define SND_BBFPRO_CTL_REG1_SPDIF_OPTICAL 10
+#define SND_BBFPRO_CTL_REG2_48V_AN1 0
+#define SND_BBFPRO_CTL_REG2_48V_AN2 1
+#define SND_BBFPRO_CTL_REG2_SENS_IN3 2
+#define SND_BBFPRO_CTL_REG2_SENS_IN4 3
+#define SND_BBFPRO_CTL_REG2_PAD_AN1 4
+#define SND_BBFPRO_CTL_REG2_PAD_AN2 5
+
+#define SND_BBFPRO_MIXER_IDX_MASK 0x1ff
+#define SND_BBFPRO_MIXER_VAL_MASK 0x3ffff
+#define SND_BBFPRO_MIXER_VAL_SHIFT 9
+#define SND_BBFPRO_MIXER_VAL_MIN 0 // -inf
+#define SND_BBFPRO_MIXER_VAL_MAX 65536 // +6dB
+
+#define SND_BBFPRO_USBREQ_CTL_REG1 0x10
+#define SND_BBFPRO_USBREQ_CTL_REG2 0x17
+#define SND_BBFPRO_USBREQ_MIXER 0x12
+
+static int snd_bbfpro_ctl_update(struct usb_mixer_interface *mixer, u8 reg,
+ u8 index, u8 value)
+{
+ int err;
+ u16 usb_req, usb_idx, usb_val;
+ struct snd_usb_audio *chip = mixer->chip;
+
+ err = snd_usb_lock_shutdown(chip);
+ if (err < 0)
+ return err;
+
+ if (reg == SND_BBFPRO_CTL_REG1) {
+ usb_req = SND_BBFPRO_USBREQ_CTL_REG1;
+ if (index == SND_BBFPRO_CTL_REG1_CLK_OPTICAL) {
+ usb_idx = 3;
+ usb_val = value ? 3 : 0;
+ } else {
+ usb_idx = 1 << index;
+ usb_val = value ? usb_idx : 0;
+ }
+ } else {
+ usb_req = SND_BBFPRO_USBREQ_CTL_REG2;
+ usb_idx = 1 << index;
+ usb_val = value ? usb_idx : 0;
+ }
+
+ err = snd_usb_ctl_msg(chip->dev,
+ usb_sndctrlpipe(chip->dev, 0), usb_req,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ usb_val, usb_idx, 0, 0);
+
+ snd_usb_unlock_shutdown(chip);
+ return err;
+}
+
+static int snd_bbfpro_ctl_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ u8 reg, idx, val;
+ int pv;
+
+ pv = kcontrol->private_value;
+ reg = pv & SND_BBFPRO_CTL_REG_MASK;
+ idx = (pv >> SND_BBFPRO_CTL_IDX_SHIFT) & SND_BBFPRO_CTL_IDX_MASK;
+ val = kcontrol->private_value >> SND_BBFPRO_CTL_VAL_SHIFT;
+
+ if ((reg == SND_BBFPRO_CTL_REG1 &&
+ idx == SND_BBFPRO_CTL_REG1_CLK_OPTICAL) ||
+ (reg == SND_BBFPRO_CTL_REG2 &&
+ (idx == SND_BBFPRO_CTL_REG2_SENS_IN3 ||
+ idx == SND_BBFPRO_CTL_REG2_SENS_IN4))) {
+ ucontrol->value.enumerated.item[0] = val;
+ } else {
+ ucontrol->value.integer.value[0] = val;
+ }
+ return 0;
+}
+
+static int snd_bbfpro_ctl_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ u8 reg, idx;
+ int pv;
+
+ pv = kcontrol->private_value;
+ reg = pv & SND_BBFPRO_CTL_REG_MASK;
+ idx = (pv >> SND_BBFPRO_CTL_IDX_SHIFT) & SND_BBFPRO_CTL_IDX_MASK;
+
+ if (reg == SND_BBFPRO_CTL_REG1 &&
+ idx == SND_BBFPRO_CTL_REG1_CLK_OPTICAL) {
+ static const char * const texts[2] = {
+ "AutoSync",
+ "Internal"
+ };
+ return snd_ctl_enum_info(uinfo, 1, 2, texts);
+ } else if (reg == SND_BBFPRO_CTL_REG2 &&
+ (idx == SND_BBFPRO_CTL_REG2_SENS_IN3 ||
+ idx == SND_BBFPRO_CTL_REG2_SENS_IN4)) {
+ static const char * const texts[2] = {
+ "-10dBV",
+ "+4dBu"
+ };
+ return snd_ctl_enum_info(uinfo, 1, 2, texts);
+ }
+
+ uinfo->count = 1;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 1;
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+ return 0;
+}
+
+static int snd_bbfpro_ctl_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ int err;
+ u8 reg, idx;
+ int old_value, pv, val;
+
+ struct usb_mixer_elem_list *list = snd_kcontrol_chip(kcontrol);
+ struct usb_mixer_interface *mixer = list->mixer;
+
+ pv = kcontrol->private_value;
+ reg = pv & SND_BBFPRO_CTL_REG_MASK;
+ idx = (pv >> SND_BBFPRO_CTL_IDX_SHIFT) & SND_BBFPRO_CTL_IDX_MASK;
+ old_value = (pv >> SND_BBFPRO_CTL_VAL_SHIFT) & SND_BBFPRO_CTL_VAL_MASK;
+
+ if ((reg == SND_BBFPRO_CTL_REG1 &&
+ idx == SND_BBFPRO_CTL_REG1_CLK_OPTICAL) ||
+ (reg == SND_BBFPRO_CTL_REG2 &&
+ (idx == SND_BBFPRO_CTL_REG2_SENS_IN3 ||
+ idx == SND_BBFPRO_CTL_REG2_SENS_IN4))) {
+ val = ucontrol->value.enumerated.item[0];
+ } else {
+ val = ucontrol->value.integer.value[0];
+ }
+
+ if (val > 1)
+ return -EINVAL;
+
+ if (val == old_value)
+ return 0;
+
+ kcontrol->private_value = reg
+ | ((idx & SND_BBFPRO_CTL_IDX_MASK) << SND_BBFPRO_CTL_IDX_SHIFT)
+ | ((val & SND_BBFPRO_CTL_VAL_MASK) << SND_BBFPRO_CTL_VAL_SHIFT);
+
+ err = snd_bbfpro_ctl_update(mixer, reg, idx, val);
+ return err < 0 ? err : 1;
+}
+
+static int snd_bbfpro_ctl_resume(struct usb_mixer_elem_list *list)
+{
+ u8 reg, idx;
+ int value, pv;
+
+ pv = list->kctl->private_value;
+ reg = pv & SND_BBFPRO_CTL_REG_MASK;
+ idx = (pv >> SND_BBFPRO_CTL_IDX_SHIFT) & SND_BBFPRO_CTL_IDX_MASK;
+ value = (pv >> SND_BBFPRO_CTL_VAL_SHIFT) & SND_BBFPRO_CTL_VAL_MASK;
+
+ return snd_bbfpro_ctl_update(list->mixer, reg, idx, value);
+}
+
+static int snd_bbfpro_vol_update(struct usb_mixer_interface *mixer, u16 index,
+ u32 value)
+{
+ struct snd_usb_audio *chip = mixer->chip;
+ int err;
+ u16 idx;
+ u16 usb_idx, usb_val;
+ u32 v;
+
+ err = snd_usb_lock_shutdown(chip);
+ if (err < 0)
+ return err;
+
+ idx = index & SND_BBFPRO_MIXER_IDX_MASK;
+ // 18 bit linear volume, split so 2 bits end up in index.
+ v = value & SND_BBFPRO_MIXER_VAL_MASK;
+ usb_idx = idx | (v & 0x3) << 14;
+ usb_val = (v >> 2) & 0xffff;
+
+ err = snd_usb_ctl_msg(chip->dev,
+ usb_sndctrlpipe(chip->dev, 0),
+ SND_BBFPRO_USBREQ_MIXER,
+ USB_DIR_OUT | USB_TYPE_VENDOR |
+ USB_RECIP_DEVICE,
+ usb_val, usb_idx, 0, 0);
+
+ snd_usb_unlock_shutdown(chip);
+ return err;
+}
+
+static int snd_bbfpro_vol_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ ucontrol->value.integer.value[0] =
+ kcontrol->private_value >> SND_BBFPRO_MIXER_VAL_SHIFT;
+ return 0;
+}
+
+static int snd_bbfpro_vol_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 1;
+ uinfo->value.integer.min = SND_BBFPRO_MIXER_VAL_MIN;
+ uinfo->value.integer.max = SND_BBFPRO_MIXER_VAL_MAX;
+ return 0;
+}
+
+static int snd_bbfpro_vol_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ int err;
+ u16 idx;
+ u32 new_val, old_value, uvalue;
+ struct usb_mixer_elem_list *list = snd_kcontrol_chip(kcontrol);
+ struct usb_mixer_interface *mixer = list->mixer;
+
+ uvalue = ucontrol->value.integer.value[0];
+ idx = kcontrol->private_value & SND_BBFPRO_MIXER_IDX_MASK;
+ old_value = kcontrol->private_value >> SND_BBFPRO_MIXER_VAL_SHIFT;
+
+ if (uvalue > SND_BBFPRO_MIXER_VAL_MAX)
+ return -EINVAL;
+
+ if (uvalue == old_value)
+ return 0;
+
+ new_val = uvalue & SND_BBFPRO_MIXER_VAL_MASK;
+
+ kcontrol->private_value = idx
+ | (new_val << SND_BBFPRO_MIXER_VAL_SHIFT);
+
+ err = snd_bbfpro_vol_update(mixer, idx, new_val);
+ return err < 0 ? err : 1;
+}
+
+static int snd_bbfpro_vol_resume(struct usb_mixer_elem_list *list)
+{
+ int pv = list->kctl->private_value;
+ u16 idx = pv & SND_BBFPRO_MIXER_IDX_MASK;
+ u32 val = (pv >> SND_BBFPRO_MIXER_VAL_SHIFT)
+ & SND_BBFPRO_MIXER_VAL_MASK;
+ return snd_bbfpro_vol_update(list->mixer, idx, val);
+}
+
+// Predfine elements
+static const struct snd_kcontrol_new snd_bbfpro_ctl_control = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .index = 0,
+ .info = snd_bbfpro_ctl_info,
+ .get = snd_bbfpro_ctl_get,
+ .put = snd_bbfpro_ctl_put
+};
+
+static const struct snd_kcontrol_new snd_bbfpro_vol_control = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .index = 0,
+ .info = snd_bbfpro_vol_info,
+ .get = snd_bbfpro_vol_get,
+ .put = snd_bbfpro_vol_put
+};
+
+static int snd_bbfpro_ctl_add(struct usb_mixer_interface *mixer, u8 reg,
+ u8 index, char *name)
+{
+ struct snd_kcontrol_new knew = snd_bbfpro_ctl_control;
+
+ knew.name = name;
+ knew.private_value = (reg & SND_BBFPRO_CTL_REG_MASK)
+ | ((index & SND_BBFPRO_CTL_IDX_MASK)
+ << SND_BBFPRO_CTL_IDX_SHIFT);
+
+ return add_single_ctl_with_resume(mixer, 0, snd_bbfpro_ctl_resume,
+ &knew, NULL);
+}
+
+static int snd_bbfpro_vol_add(struct usb_mixer_interface *mixer, u16 index,
+ char *name)
+{
+ struct snd_kcontrol_new knew = snd_bbfpro_vol_control;
+
+ knew.name = name;
+ knew.private_value = index & SND_BBFPRO_MIXER_IDX_MASK;
+
+ return add_single_ctl_with_resume(mixer, 0, snd_bbfpro_vol_resume,
+ &knew, NULL);
+}
+
+static int snd_bbfpro_controls_create(struct usb_mixer_interface *mixer)
+{
+ int err, i, o;
+ char name[48];
+
+ static const char * const input[] = {
+ "AN1", "AN2", "IN3", "IN4", "AS1", "AS2", "ADAT3",
+ "ADAT4", "ADAT5", "ADAT6", "ADAT7", "ADAT8"};
+
+ static const char * const output[] = {
+ "AN1", "AN2", "PH3", "PH4", "AS1", "AS2", "ADAT3", "ADAT4",
+ "ADAT5", "ADAT6", "ADAT7", "ADAT8"};
+
+ for (o = 0 ; o < 12 ; ++o) {
+ for (i = 0 ; i < 12 ; ++i) {
+ // Line routing
+ snprintf(name, sizeof(name),
+ "%s-%s-%s Playback Volume",
+ (i < 2 ? "Mic" : "Line"),
+ input[i], output[o]);
+ err = snd_bbfpro_vol_add(mixer, (26 * o + i), name);
+ if (err < 0)
+ return err;
+
+ // PCM routing... yes, it is output remapping
+ snprintf(name, sizeof(name),
+ "PCM-%s-%s Playback Volume",
+ output[i], output[o]);
+ err = snd_bbfpro_vol_add(mixer, (26 * o + 12 + i),
+ name);
+ if (err < 0)
+ return err;
+ }
+ }
+
+ // Control Reg 1
+ err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG1,
+ SND_BBFPRO_CTL_REG1_CLK_OPTICAL,
+ "Sample Clock Source");
+ if (err < 0)
+ return err;
+
+ err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG1,
+ SND_BBFPRO_CTL_REG1_SPDIF_PRO,
+ "IEC958 Pro Mask");
+ if (err < 0)
+ return err;
+
+ err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG1,
+ SND_BBFPRO_CTL_REG1_SPDIF_EMPH,
+ "IEC958 Emphasis");
+ if (err < 0)
+ return err;
+
+ err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG1,
+ SND_BBFPRO_CTL_REG1_SPDIF_OPTICAL,
+ "IEC958 Switch");
+ if (err < 0)
+ return err;
+
+ // Control Reg 2
+ err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG2,
+ SND_BBFPRO_CTL_REG2_48V_AN1,
+ "Mic-AN1 48V");
+ if (err < 0)
+ return err;
+
+ err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG2,
+ SND_BBFPRO_CTL_REG2_48V_AN2,
+ "Mic-AN2 48V");
+ if (err < 0)
+ return err;
+
+ err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG2,
+ SND_BBFPRO_CTL_REG2_SENS_IN3,
+ "Line-IN3 Sens.");
+ if (err < 0)
+ return err;
+
+ err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG2,
+ SND_BBFPRO_CTL_REG2_SENS_IN4,
+ "Line-IN4 Sens.");
+ if (err < 0)
+ return err;
+
+ err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG2,
+ SND_BBFPRO_CTL_REG2_PAD_AN1,
+ "Mic-AN1 PAD");
+ if (err < 0)
+ return err;
+
+ err = snd_bbfpro_ctl_add(mixer, SND_BBFPRO_CTL_REG2,
+ SND_BBFPRO_CTL_REG2_PAD_AN2,
+ "Mic-AN2 PAD");
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer)
{
int err = 0;
@@ -2286,6 +2701,9 @@ int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer)
case USB_ID(0x0194f, 0x010c): /* Presonus Studio 1810c */
err = snd_sc1810_init_mixer(mixer);
break;
+ case USB_ID(0x2a39, 0x3fb0): /* RME Babyface Pro FS */
+ err = snd_bbfpro_controls_create(mixer);
+ break;
}
return err;
--
2.26.2
