April 2020 - Alsa-devel - mailman.alsa-project.org

[PATCH AUTOSEL 5.5 63/75] ALSA: usb-audio: Add Pioneer DJ DJM-250MK2 quirk
by Sasha Levin 18 Apr '20

18 Apr '20

From: František Kučera <franta-linux(a)frantovo.cz> [ Upstream commit 73d8c94084341e2895169a0462dbc18167f01683 ] Pioneer DJ DJM-250MK2 is a mixer that acts like a USB sound card. The MIDI controller part is standard but the PCM part is "vendor specific". Output is enabled by this quirk: 8 channels, 48 000 Hz, S24_3LE. Input is not working. Signed-off-by: František Kučera <franta-linux(a)frantovo.cz> Link: https://lore.kernel.org/r/20200401095907.3387-1-konference@frantovo.cz Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/usb/quirks-table.h | 42 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index d187aa6d50db0..dcaf9eed9a415 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -3592,5 +3592,47 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"), } } }, +{ + /* + * Pioneer DJ DJM-250MK2 + * PCM is 8 channels out @ 48 fixed (endpoints 0x01). + * The output from computer to the mixer is usable. + * + * The input (phono or line to computer) is not working. + * It should be at endpoint 0x82 and probably also 8 channels, + * but it seems that it works only with Pioneer proprietary software. + * Even on officially supported OS, the Audacity was unable to record + * and Mixxx to recognize the control vinyls. + */ + USB_DEVICE_VENDOR_SPEC(0x2b73, 0x0017), + .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + .ifnum = QUIRK_ANY_INTERFACE, + .type = QUIRK_COMPOSITE, + .data = (const struct snd_usb_audio_quirk[]) { + { + .ifnum = 0, + .type = QUIRK_AUDIO_FIXED_ENDPOINT, + .data = &(const struct audioformat) { + .formats = SNDRV_PCM_FMTBIT_S24_3LE, + .channels = 8, // outputs + .iface = 0, + .altsetting = 1, + .altset_idx = 1, + .endpoint = 0x01, + .ep_attr = USB_ENDPOINT_XFER_ISOC| + USB_ENDPOINT_SYNC_ASYNC, + .rates = SNDRV_PCM_RATE_48000, + .rate_min = 48000, + .rate_max = 48000, + .nr_rates = 1, + .rate_table = (unsigned int[]) { 48000 } + } + }, + { + .ifnum = -1 + } + } + } +}, #undef USB_DEVICE_VENDOR_SPEC -- 2.20.1

1 0

[PATCH AUTOSEL 5.5 61/75] ASoC: Intel: bytcr_rt5640: Add quirk for MPMAN MPWIN895CL tablet
by Sasha Levin 18 Apr '20

18 Apr '20

From: Hans de Goede <hdegoede(a)redhat.com> [ Upstream commit c8b78f24c1247b7bd0882885c672d9dec5800bc6 ] The MPMAN MPWIN895CL tablet almost fully works with out default settings. The only problem is that it has only 1 speaker so any sounds only playing on the right channel get lost. Add a quirk for this model using the default settings + MONO_SPEAKER. Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Link: https://lore.kernel.org/r/20200405133726.24154-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/intel/boards/bytcr_rt5640.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index 243f683bc02a7..e62e1d7815aa9 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -591,6 +591,17 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { BYT_RT5640_SSP0_AIF1 | BYT_RT5640_MCLK_EN), }, + { + /* MPMAN MPWIN895CL */ + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "MPMAN"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "MPWIN8900CL"), + }, + .driver_data = (void *)(BYTCR_INPUT_DEFAULTS | + BYT_RT5640_MONO_SPEAKER | + BYT_RT5640_SSP0_AIF1 | + BYT_RT5640_MCLK_EN), + }, { /* MSI S100 tablet */ .matches = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Micro-Star International Co., Ltd."), -- 2.20.1

1 0

[PATCH AUTOSEL 5.5 59/75] ALSA: hda: Fix potential access overflow in beep helper
by Sasha Levin 18 Apr '20

18 Apr '20

From: Takashi Iwai <tiwai(a)suse.de> [ Upstream commit 0ad3f0b384d58f3bd1f4fb87d0af5b8f6866f41a ] The beep control helper function blindly stores the values in two stereo channels no matter whether the actual control is mono or stereo. This is practically harmless, but it annoys the recently introduced sanity check, resulting in an error when the checker is enabled. This patch corrects the behavior to store only on the defined array member. Fixes: 0401e8548eac ("ALSA: hda - Move beep helper functions to hda_beep.c") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207139 Reviewed-by: Jaroslav Kysela <perex(a)perex.cz> Cc: <stable(a)vger.kernel.org> Link: https://lore.kernel.org/r/20200407084402.25589-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/pci/hda/hda_beep.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/hda_beep.c b/sound/pci/hda/hda_beep.c index b7d9160ed8688..c6e1e03a5e4da 100644 --- a/sound/pci/hda/hda_beep.c +++ b/sound/pci/hda/hda_beep.c @@ -290,8 +290,12 @@ int snd_hda_mixer_amp_switch_get_beep(struct snd_kcontrol *kcontrol, { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); struct hda_beep *beep = codec->beep; + int chs = get_amp_channels(kcontrol); + if (beep && (!beep->enabled || !ctl_has_mute(kcontrol))) { - ucontrol->value.integer.value[0] = + if (chs & 1) + ucontrol->value.integer.value[0] = beep->enabled; + if (chs & 2) ucontrol->value.integer.value[1] = beep->enabled; return 0; } -- 2.20.1

1 0

[PATCH AUTOSEL 5.5 58/75] ALSA: ice1724: Fix invalid access for enumerated ctl items
by Sasha Levin 18 Apr '20

18 Apr '20

From: Takashi Iwai <tiwai(a)suse.de> [ Upstream commit c47914c00be346bc5b48c48de7b0da5c2d1a296c ] The access to Analog Capture Source control value implemented in prodigy_hifi.c is wrong, as caught by the recently introduced sanity check; it should be accessing value.enumerated.item[] instead of value.integer.value[]. This patch corrects the wrong access pattern. Fixes: 6b8d6e5518e2 ("[ALSA] ICE1724: Added support for Audiotrak Prodigy 7.1 HiFi & HD2, Hercules Fortissimo IV") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207139 Reviewed-by: Jaroslav Kysela <perex(a)perex.cz> Cc: <stable(a)vger.kernel.org> Link: https://lore.kernel.org/r/20200407084402.25589-3-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/pci/ice1712/prodigy_hifi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/pci/ice1712/prodigy_hifi.c b/sound/pci/ice1712/prodigy_hifi.c index 9d71e9d5c9a06..3cf41c11a4050 100644 --- a/sound/pci/ice1712/prodigy_hifi.c +++ b/sound/pci/ice1712/prodigy_hifi.c @@ -536,7 +536,7 @@ static int wm_adc_mux_enum_get(struct snd_kcontrol *kcontrol, struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol); mutex_lock(&ice->gpio_mutex); - ucontrol->value.integer.value[0] = wm_get(ice, WM_ADC_MUX) & 0x1f; + ucontrol->value.enumerated.item[0] = wm_get(ice, WM_ADC_MUX) & 0x1f; mutex_unlock(&ice->gpio_mutex); return 0; } @@ -550,7 +550,7 @@ static int wm_adc_mux_enum_put(struct snd_kcontrol *kcontrol, mutex_lock(&ice->gpio_mutex); oval = wm_get(ice, WM_ADC_MUX); - nval = (oval & 0xe0) | ucontrol->value.integer.value[0]; + nval = (oval & 0xe0) | ucontrol->value.enumerated.item[0]; if (nval != oval) { wm_put(ice, WM_ADC_MUX, nval); change = 1; -- 2.20.1

1 0

[PATCH AUTOSEL 5.5 54/75] ALSA: hda/realtek - Add quirk for MSI GL63
by Sasha Levin 18 Apr '20

18 Apr '20

From: Takashi Iwai <tiwai(a)suse.de> [ Upstream commit 1d3aa4a5516d2e4933fe3cca11d3349ef63bc547 ] MSI GL63 laptop requires the similar quirk like other MSI models, ALC1220_FIXUP_CLEVO_P950. The board BIOS doesn't provide a PCI SSID for the device, hence we need to take the codec SSID (1462:1275) instead. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207157 Cc: <stable(a)vger.kernel.org> Link: https://lore.kernel.org/r/20200408135645.21896-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index f44d8e2589337..62eac992ebd55 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -2449,6 +2449,7 @@ static const struct snd_pci_quirk alc882_fixup_tbl[] = { SND_PCI_QUIRK(0x1458, 0xa0b8, "Gigabyte AZ370-Gaming", ALC1220_FIXUP_GB_DUAL_CODECS), SND_PCI_QUIRK(0x1458, 0xa0cd, "Gigabyte X570 Aorus Master", ALC1220_FIXUP_CLEVO_P950), SND_PCI_QUIRK(0x1462, 0x1228, "MSI-GP63", ALC1220_FIXUP_CLEVO_P950), + SND_PCI_QUIRK(0x1462, 0x1275, "MSI-GL63", ALC1220_FIXUP_CLEVO_P950), SND_PCI_QUIRK(0x1462, 0x1276, "MSI-GL73", ALC1220_FIXUP_CLEVO_P950), SND_PCI_QUIRK(0x1462, 0x1293, "MSI-GP65", ALC1220_FIXUP_CLEVO_P950), SND_PCI_QUIRK(0x1462, 0x7350, "MSI-7350", ALC889_FIXUP_CD), -- 2.20.1

1 0

[PATCH AUTOSEL 5.5 53/75] ALSA: hda: Add driver blacklist
by Sasha Levin 18 Apr '20

18 Apr '20

From: Takashi Iwai <tiwai(a)suse.de> [ Upstream commit 3c6fd1f07ed03a04debbb9a9d782205f1ef5e2ab ] The recent AMD platform exposes an HD-audio bus but without any actual codecs, which is internally tied with a USB-audio device, supposedly. It results in "no codecs" error of HD-audio bus driver, and it's nothing but a waste of resources. This patch introduces a static blacklist table for skipping such a known bogus PCI SSID entry. As of writing this patch, the known SSIDs are: * 1043:874f - ASUS ROG Zenith II / Strix * 1462:cb59 - MSI TRX40 Creator * 1462:cb60 - MSI TRX40 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206543 Cc: <stable(a)vger.kernel.org> Link: https://lore.kernel.org/r/20200408140449.22319-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/pci/hda/hda_intel.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 9d3b28bcba9b4..d2d5a19bdecce 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2074,6 +2074,17 @@ static void pcm_mmap_prepare(struct snd_pcm_substream *substream, #endif } +/* Blacklist for skipping the whole probe: + * some HD-audio PCI entries are exposed without any codecs, and such devices + * should be ignored from the beginning. + */ +static const struct snd_pci_quirk driver_blacklist[] = { + SND_PCI_QUIRK(0x1043, 0x874f, "ASUS ROG Zenith II / Strix", 0), + SND_PCI_QUIRK(0x1462, 0xcb59, "MSI TRX40 Creator", 0), + SND_PCI_QUIRK(0x1462, 0xcb60, "MSI TRX40", 0), + {} +}; + static const struct hda_controller_ops pci_hda_ops = { .disable_msi_reset_irq = disable_msi_reset_irq, .pcm_mmap_prepare = pcm_mmap_prepare, @@ -2090,6 +2101,11 @@ static int azx_probe(struct pci_dev *pci, bool schedule_probe; int err; + if (snd_pci_quirk_lookup(pci, driver_blacklist)) { + dev_info(&pci->dev, "Skipping the blacklisted device\n"); + return -ENODEV; + } + if (dev >= SNDRV_CARDS) return -ENODEV; if (!enable[dev]) { -- 2.20.1

1 0

[PATCH AUTOSEL 5.5 20/75] ASoC: Intel: atom: Take the drv->lock mutex before calling sst_send_slot_map()
by Sasha Levin 18 Apr '20

18 Apr '20

From: Hans de Goede <hdegoede(a)redhat.com> [ Upstream commit 81630dc042af998b9f58cd8e2c29dab9777ea176 ] sst_send_slot_map() uses sst_fill_and_send_cmd_unlocked() because in some places it is called with the drv->lock mutex already held. So it must always be called with the mutex locked. This commit adds missing locking in the sst_set_be_modules() code-path. Fixes: 24c8d14192cc ("ASoC: Intel: mrfld: add DSP core controls") Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Link: https://lore.kernel.org/r/20200402185359.3424-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/intel/atom/sst-atom-controls.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/intel/atom/sst-atom-controls.c b/sound/soc/intel/atom/sst-atom-controls.c index baef461a99f19..2c3798034b1de 100644 --- a/sound/soc/intel/atom/sst-atom-controls.c +++ b/sound/soc/intel/atom/sst-atom-controls.c @@ -966,7 +966,9 @@ static int sst_set_be_modules(struct snd_soc_dapm_widget *w, dev_dbg(c->dev, "Enter: widget=%s\n", w->name); if (SND_SOC_DAPM_EVENT_ON(event)) { + mutex_lock(&drv->lock); ret = sst_send_slot_map(drv); + mutex_unlock(&drv->lock); if (ret) return ret; ret = sst_send_pipe_module_params(w, k); -- 2.20.1

1 0

[PATCH AUTOSEL 5.5 17/75] ASoC: dpcm: allow start or stop during pause for backend
by Sasha Levin 18 Apr '20

18 Apr '20

From: 이경택 <gt82.lee(a)samsung.com> [ Upstream commit 21fca8bdbb64df1297e8c65a746c4c9f4a689751 ] soc_compr_trigger_fe() allows start or stop after pause_push. In dpcm_be_dai_trigger(), however, only pause_release is allowed command after pause_push. So, start or stop after pause in compress offload is always returned as error if the compress offload is used with dpcm. To fix the problem, SND_SOC_DPCM_STATE_PAUSED should be allowed for start or stop command. Signed-off-by: Gyeongtaek Lee <gt82.lee(a)samsung.com> Reviewed-by: Vinod Koul <vkoul(a)kernel.org> Link: https://lore.kernel.org/r/004d01d607c1$7a3d5250$6eb7f6f0$@samsung.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/soc-pcm.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index 8de29f48442f6..e4ff0796526c7 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -2256,7 +2256,8 @@ int dpcm_be_dai_trigger(struct snd_soc_pcm_runtime *fe, int stream, switch (cmd) { case SNDRV_PCM_TRIGGER_START: if ((be->dpcm[stream].state != SND_SOC_DPCM_STATE_PREPARE) && - (be->dpcm[stream].state != SND_SOC_DPCM_STATE_STOP)) + (be->dpcm[stream].state != SND_SOC_DPCM_STATE_STOP) && + (be->dpcm[stream].state != SND_SOC_DPCM_STATE_PAUSED)) continue; ret = dpcm_do_trigger(dpcm, be_substream, cmd); @@ -2286,7 +2287,8 @@ int dpcm_be_dai_trigger(struct snd_soc_pcm_runtime *fe, int stream, be->dpcm[stream].state = SND_SOC_DPCM_STATE_START; break; case SNDRV_PCM_TRIGGER_STOP: - if (be->dpcm[stream].state != SND_SOC_DPCM_STATE_START) + if ((be->dpcm[stream].state != SND_SOC_DPCM_STATE_START) && + (be->dpcm[stream].state != SND_SOC_DPCM_STATE_PAUSED)) continue; if (!snd_soc_dpcm_can_be_free_stop(fe, be, stream)) -- 2.20.1

1 0

[PATCH AUTOSEL 5.6 68/73] ALSA: hda/realtek - Add quirk for Lenovo Carbon X1 8th gen
by Sasha Levin 18 Apr '20

18 Apr '20

From: Hans de Goede <hdegoede(a)redhat.com> [ Upstream commit ca707b3f00b4f31a6e1eb37e8ae99f15f2bb1fe5 ] The audio setup on the Lenovo Carbon X1 8th gen is the same as that on the Lenovo Carbon X1 7th gen, as such it needs the same ALC285_FIXUP_THINKPAD_HEADSET_JACK quirk. This fixes volume control of the speaker not working among other things. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1820196 Cc: stable(a)vger.kernel.org Suggested-by: Jaroslav Kysela <perex(a)perex.cz> Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Reviewed-by: Jaroslav Kysela <perex(a)perex.cz> Link: https://lore.kernel.org/r/20200402174311.238614-1-hdegoede@redhat.com Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 5cced684cf41f..3f3484455080d 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -7300,6 +7300,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x225d, "Thinkpad T480", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), SND_PCI_QUIRK(0x17aa, 0x2292, "Thinkpad X1 Yoga 7th", ALC285_FIXUP_THINKPAD_HEADSET_JACK), SND_PCI_QUIRK(0x17aa, 0x2293, "Thinkpad X1 Carbon 7th", ALC285_FIXUP_THINKPAD_HEADSET_JACK), + SND_PCI_QUIRK(0x17aa, 0x22be, "Thinkpad X1 Carbon 8th", ALC285_FIXUP_THINKPAD_HEADSET_JACK), SND_PCI_QUIRK(0x17aa, 0x30bb, "ThinkCentre AIO", ALC233_FIXUP_LENOVO_LINE2_MIC_HOTKEY), SND_PCI_QUIRK(0x17aa, 0x30e2, "ThinkCentre AIO", ALC233_FIXUP_LENOVO_LINE2_MIC_HOTKEY), SND_PCI_QUIRK(0x17aa, 0x310c, "ThinkCentre Station", ALC294_FIXUP_LENOVO_MIC_LOCATION), -- 2.20.1

1 0

[PATCH AUTOSEL 5.6 67/73] ALSA: usb-audio: Add Pioneer DJ DJM-250MK2 quirk
by Sasha Levin 18 Apr '20

18 Apr '20

From: František Kučera <franta-linux(a)frantovo.cz> [ Upstream commit 73d8c94084341e2895169a0462dbc18167f01683 ] Pioneer DJ DJM-250MK2 is a mixer that acts like a USB sound card. The MIDI controller part is standard but the PCM part is "vendor specific". Output is enabled by this quirk: 8 channels, 48 000 Hz, S24_3LE. Input is not working. Signed-off-by: František Kučera <franta-linux(a)frantovo.cz> Link: https://lore.kernel.org/r/20200401095907.3387-1-konference@frantovo.cz Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/usb/quirks-table.h | 42 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index d187aa6d50db0..dcaf9eed9a415 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -3592,5 +3592,47 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"), } } }, +{ + /* + * Pioneer DJ DJM-250MK2 + * PCM is 8 channels out @ 48 fixed (endpoints 0x01). + * The output from computer to the mixer is usable. + * + * The input (phono or line to computer) is not working. + * It should be at endpoint 0x82 and probably also 8 channels, + * but it seems that it works only with Pioneer proprietary software. + * Even on officially supported OS, the Audacity was unable to record + * and Mixxx to recognize the control vinyls. + */ + USB_DEVICE_VENDOR_SPEC(0x2b73, 0x0017), + .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + .ifnum = QUIRK_ANY_INTERFACE, + .type = QUIRK_COMPOSITE, + .data = (const struct snd_usb_audio_quirk[]) { + { + .ifnum = 0, + .type = QUIRK_AUDIO_FIXED_ENDPOINT, + .data = &(const struct audioformat) { + .formats = SNDRV_PCM_FMTBIT_S24_3LE, + .channels = 8, // outputs + .iface = 0, + .altsetting = 1, + .altset_idx = 1, + .endpoint = 0x01, + .ep_attr = USB_ENDPOINT_XFER_ISOC| + USB_ENDPOINT_SYNC_ASYNC, + .rates = SNDRV_PCM_RATE_48000, + .rate_min = 48000, + .rate_max = 48000, + .nr_rates = 1, + .rate_table = (unsigned int[]) { 48000 } + } + }, + { + .ifnum = -1 + } + } + } +}, #undef USB_DEVICE_VENDOR_SPEC -- 2.20.1

1 0