March 2020 - Alsa-devel - mailman.alsa-project.org

[PATCH] ALSA: pcm: Fix superfluous snprintf() usage
by Takashi Iwai 13 Mar '20

13 Mar '20

show_pcm_class() returns obviously a short string that can't overflow PAGE_SIZE. And even if it were to overflow, using snprintf() there is just wrong, as it doesn't return the correct size. So simplify with sprintf() instead. Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/core/pcm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/core/pcm.c b/sound/core/pcm.c index a141a301369f..b6d2331a82f7 100644 --- a/sound/core/pcm.c +++ b/sound/core/pcm.c @@ -1019,7 +1019,7 @@ static ssize_t show_pcm_class(struct device *dev, str = "none"; else str = strs[pcm->dev_class]; - return snprintf(buf, PAGE_SIZE, "%s\n", str); + return sprintf(buf, "%s\n", str); } static DEVICE_ATTR(pcm_class, 0444, show_pcm_class, NULL); -- 2.16.4

1 0

[RESEND PATCH v2 0/9] ALSA: compress: Add wma, alac and ape support
by Vinod Koul 13 Mar '20

13 Mar '20

This series adds more WMA profiles and WMA decoder parameters to UAPI and then support for these in qcom driver. It also adds FLAC and APE IDs and decoder parameters to UAPI and then support in qcom driver This was tested on Dragon board RB3. Last, bump up the compressed version so that userspace can check for the support. Since the series touches compress uapi and asoc, it would make sense to go thru asoc tree with acks. Changes in v2: - use bitflags for wma profiles Vinod Koul (9): ALSA: compress: add wma codec profiles ALSA: compress: Add wma decoder params ASoC: qcom: q6asm: pass codec profile to q6asm_open_write ASoC: qcom: q6asm: add support to wma config ASoC: qcom: q6asm-dai: add support to wma decoder ALSA: compress: add alac & ape decoder params ASoC: qcom: q6asm: add support for alac and ape configs ASoC: qcom: q6asm-dai: add support for ALAC and APE decoders ALSA: compress: bump the version include/uapi/sound/compress_offload.h | 2 +- include/uapi/sound/compress_params.h | 37 +++- sound/soc/qcom/qdsp6/q6asm-dai.c | 136 +++++++++++++- sound/soc/qcom/qdsp6/q6asm.c | 243 +++++++++++++++++++++++++- sound/soc/qcom/qdsp6/q6asm.h | 51 +++++- 5 files changed, 462 insertions(+), 7 deletions(-) -- 2.24.1

2 15

[PATCH] soundwire: stream: use sdw_write instead of update
by Srinivas Kandagatla 13 Mar '20

13 Mar '20

There is no point in using update for registers with write mask as 0xFF, this adds unecessary traffic on the bus. Just use sdw_write directly. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> --- drivers/soundwire/stream.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c index 00348d1fc606..1b43d03c79ea 100644 --- a/drivers/soundwire/stream.c +++ b/drivers/soundwire/stream.c @@ -313,9 +313,9 @@ static int sdw_enable_disable_slave_ports(struct sdw_bus *bus, * it is safe to reset this register */ if (en) - ret = sdw_update(s_rt->slave, addr, 0xFF, p_rt->ch_mask); + ret = sdw_write(s_rt->slave, addr, p_rt->ch_mask); else - ret = sdw_update(s_rt->slave, addr, 0xFF, 0x0); + ret = sdw_write(s_rt->slave, addr, 0x0); if (ret < 0) dev_err(&s_rt->slave->dev, @@ -464,10 +464,9 @@ static int sdw_prep_deprep_slave_ports(struct sdw_bus *bus, addr = SDW_DPN_PREPARECTRL(p_rt->num); if (prep) - ret = sdw_update(s_rt->slave, addr, - 0xFF, p_rt->ch_mask); + ret = sdw_write(s_rt->slave, addr, p_rt->ch_mask); else - ret = sdw_update(s_rt->slave, addr, 0xFF, 0x0); + ret = sdw_write(s_rt->slave, addr, 0x0); if (ret < 0) { dev_err(&s_rt->slave->dev, -- 2.21.0

3 2

[PATCH v2 0/9] ALSA: compress: Add wma, alac and ape support
by Vinod Koul 13 Mar '20

13 Mar '20

This series adds more WMA profiles and WMA decoder parameters to UAPI and then support for these in qcom driver. It also adds FLAC and APE IDs and decoder parameters to UAPI and then support in qcom driver This was tested on Dragon board RB3. Last, bump up the compressed version so that userspace can check for the support. Since the series touches compress uapi and asoc, it would make sense to go thru asoc tree with acks. Changes in v2: - use bitflags for wma profiles Vinod Koul (9): ALSA: compress: add wma codec profiles ALSA: compress: Add wma decoder params ASoC: qcom: q6asm: pass codec profile to q6asm_open_write ASoC: qcom: q6asm: add support to wma config ASoC: qcom: q6asm-dai: add support to wma decoder ALSA: compress: add alac & ape decoder params ASoC: qcom: q6asm: add support for alac and ape configs ASoC: qcom: q6asm-dai: add support for ALAC and APE decoders ALSA: compress: bump the version include/uapi/sound/compress_offload.h | 2 +- include/uapi/sound/compress_params.h | 37 +++- sound/soc/qcom/qdsp6/q6asm-dai.c | 136 +++++++++++++- sound/soc/qcom/qdsp6/q6asm.c | 243 +++++++++++++++++++++++++- sound/soc/qcom/qdsp6/q6asm.h | 51 +++++- 5 files changed, 462 insertions(+), 7 deletions(-) -- 2.24.1

1 1

[PATCH v2 9/9] ALSA: compress: bump the version
by Vinod Koul 13 Mar '20

13 Mar '20

We have added support for bunch of new decoders and parameters for decoders. To help users find the support bump the version up to 0,2,0. Signed-off-by: Vinod Koul <vkoul(a)kernel.org> --- include/uapi/sound/compress_offload.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/uapi/sound/compress_offload.h b/include/uapi/sound/compress_offload.h index 56d95673ce0f..7184265c0b0d 100644 --- a/include/uapi/sound/compress_offload.h +++ b/include/uapi/sound/compress_offload.h @@ -31,7 +31,7 @@ #include <sound/compress_params.h> -#define SNDRV_COMPRESS_VERSION SNDRV_PROTOCOL_VERSION(0, 1, 2) +#define SNDRV_COMPRESS_VERSION SNDRV_PROTOCOL_VERSION(0, 2, 0) /** * struct snd_compressed_buffer - compressed buffer * @fragment_size: size of buffer fragment in bytes -- 2.24.1

1 0

[PATCH v2 8/9] ASoC: qcom: q6asm-dai: add support for ALAC and APE decoders
by Vinod Koul 13 Mar '20

13 Mar '20

Qualcomm DSPs also supports the ALAC and APE decoders, so add support for these and convert the snd_codec_params to qdsp format. Signed-off-by: Vinod Koul <vkoul(a)kernel.org> --- sound/soc/qcom/qdsp6/q6asm-dai.c | 67 +++++++++++++++++++++++++++++++- 1 file changed, 66 insertions(+), 1 deletion(-) diff --git a/sound/soc/qcom/qdsp6/q6asm-dai.c b/sound/soc/qcom/qdsp6/q6asm-dai.c index 53c250778eea..948710759824 100644 --- a/sound/soc/qcom/qdsp6/q6asm-dai.c +++ b/sound/soc/qcom/qdsp6/q6asm-dai.c @@ -628,12 +628,16 @@ static int q6asm_dai_compr_set_params(struct snd_compr_stream *stream, struct q6asm_dai_data *pdata; struct q6asm_flac_cfg flac_cfg; struct q6asm_wma_cfg wma_cfg; + struct q6asm_alac_cfg alac_cfg; + struct q6asm_ape_cfg ape_cfg; unsigned int wma_v9 = 0; struct device *dev = c->dev; int ret; union snd_codec_options *codec_options; struct snd_dec_flac *flac; struct snd_dec_wma *wma; + struct snd_dec_alac *alac; + struct snd_dec_ape *ape; codec_options = &(prtd->codec_param.codec.options); @@ -756,6 +760,65 @@ static int q6asm_dai_compr_set_params(struct snd_compr_stream *stream, dev_err(dev, "WMA9 CMD failed:%d\n", ret); return -EIO; } + break; + + case SND_AUDIOCODEC_ALAC: + memset(&alac_cfg, 0x0, sizeof(alac_cfg)); + alac = &codec_options->alac_d; + + alac_cfg.sample_rate = params->codec.sample_rate; + alac_cfg.avg_bit_rate = params->codec.bit_rate; + alac_cfg.bit_depth = prtd->bits_per_sample; + alac_cfg.num_channels = params->codec.ch_in; + + alac_cfg.frame_length = alac->frame_length; + alac_cfg.pb = alac->pb; + alac_cfg.mb = alac->mb; + alac_cfg.kb = alac->kb; + alac_cfg.max_run = alac->max_run; + alac_cfg.compatible_version = alac->compatible_version; + alac_cfg.max_frame_bytes = alac->max_frame_bytes; + + switch (params->codec.ch_in) { + case 1: + alac_cfg.channel_layout_tag = (100 << 16) | 1; + break; + case 2: + alac_cfg.channel_layout_tag = (101 << 16) | 2; + break; + } + ret = q6asm_stream_media_format_block_alac(prtd->audio_client, + &alac_cfg); + if (ret < 0) { + dev_err(dev, "ALAC CMD Format block failed:%d\n", ret); + return -EIO; + } + break; + + case SND_AUDIOCODEC_APE: + memset(&ape_cfg, 0x0, sizeof(ape_cfg)); + ape = &codec_options->ape_d; + + ape_cfg.sample_rate = params->codec.sample_rate; + ape_cfg.num_channels = params->codec.ch_in; + ape_cfg.bits_per_sample = prtd->bits_per_sample; + + ape_cfg.compatible_version = ape->compatible_version; + ape_cfg.compression_level = ape->compression_level; + ape_cfg.format_flags = ape->format_flags; + ape_cfg.blocks_per_frame = ape->blocks_per_frame; + ape_cfg.final_frame_blocks = ape->final_frame_blocks; + ape_cfg.total_frames = ape->total_frames; + ape_cfg.seek_table_present = ape->seek_table_present; + + ret = q6asm_stream_media_format_block_ape(prtd->audio_client, + &ape_cfg); + if (ret < 0) { + dev_err(dev, "APE CMD Format block failed:%d\n", ret); + return -EIO; + } + break; + default: break; } @@ -855,10 +918,12 @@ static int q6asm_dai_compr_get_caps(struct snd_compr_stream *stream, caps->max_fragment_size = COMPR_PLAYBACK_MAX_FRAGMENT_SIZE; caps->min_fragments = COMPR_PLAYBACK_MIN_NUM_FRAGMENTS; caps->max_fragments = COMPR_PLAYBACK_MAX_NUM_FRAGMENTS; - caps->num_codecs = 3; + caps->num_codecs = 5; caps->codecs[0] = SND_AUDIOCODEC_MP3; caps->codecs[1] = SND_AUDIOCODEC_FLAC; caps->codecs[2] = SND_AUDIOCODEC_WMA; + caps->codecs[3] = SND_AUDIOCODEC_ALAC; + caps->codecs[4] = SND_AUDIOCODEC_APE; return 0; } -- 2.24.1

1 0

[PATCH v2 7/9] ASoC: qcom: q6asm: add support for alac and ape configs
by Vinod Koul 13 Mar '20

13 Mar '20

Qualcomm DSPs expect ALAC and APE configs to be send for decoders, so add the API to program the respective config to the DSP. Signed-off-by: Vinod Koul <vkoul(a)kernel.org> --- sound/soc/qcom/qdsp6/q6asm.c | 118 +++++++++++++++++++++++++++++++++++ sound/soc/qcom/qdsp6/q6asm.h | 32 ++++++++++ 2 files changed, 150 insertions(+) diff --git a/sound/soc/qcom/qdsp6/q6asm.c b/sound/soc/qcom/qdsp6/q6asm.c index 4cec95c657ba..0e0e8f7a460a 100644 --- a/sound/soc/qcom/qdsp6/q6asm.c +++ b/sound/soc/qcom/qdsp6/q6asm.c @@ -48,6 +48,8 @@ #define ASM_STREAM_CMD_OPEN_READ_V3 0x00010DB4 #define ASM_DATA_EVENT_READ_DONE_V2 0x00010D9A #define ASM_STREAM_CMD_OPEN_READWRITE_V2 0x00010D8D +#define ASM_MEDIA_FMT_ALAC 0x00012f31 +#define ASM_MEDIA_FMT_APE 0x00012f32 #define ASM_LEGACY_STREAM_SESSION 0 @@ -133,6 +135,36 @@ struct asm_wmaprov10_fmt_blk_v2 { u32 advanced_enc_options2; } __packed; +struct asm_alac_fmt_blk_v2 { + struct asm_data_cmd_media_fmt_update_v2 fmt_blk; + u32 frame_length; + u8 compatible_version; + u8 bit_depth; + u8 pb; + u8 mb; + u8 kb; + u8 num_channels; + u16 max_run; + u32 max_frame_bytes; + u32 avg_bit_rate; + u32 sample_rate; + u32 channel_layout_tag; +} __packed; + +struct asm_ape_fmt_blk_v2 { + struct asm_data_cmd_media_fmt_update_v2 fmt_blk; + u16 compatible_version; + u16 compression_level; + u32 format_flags; + u32 blocks_per_frame; + u32 final_frame_blocks; + u32 total_frames; + u16 bits_per_sample; + u16 num_channels; + u32 sample_rate; + u32 seek_table_present; +} __packed; + struct asm_stream_cmd_set_encdec_param { u32 param_id; u32 param_size; @@ -941,6 +973,12 @@ int q6asm_open_write(struct audio_client *ac, uint32_t format, goto err; } break; + case SND_AUDIOCODEC_ALAC: + open->dec_fmt_id = ASM_MEDIA_FMT_ALAC; + break; + case SND_AUDIOCODEC_APE: + open->dec_fmt_id = ASM_MEDIA_FMT_APE; + break; default: dev_err(ac->dev, "Invalid format 0x%x\n", format); rc = -EINVAL; @@ -1198,6 +1236,86 @@ int q6asm_stream_media_format_block_wma_v10(struct audio_client *ac, } EXPORT_SYMBOL_GPL(q6asm_stream_media_format_block_wma_v10); +int q6asm_stream_media_format_block_alac(struct audio_client *ac, + struct q6asm_alac_cfg *cfg) +{ + struct asm_alac_fmt_blk_v2 *fmt; + struct apr_pkt *pkt; + void *p; + int rc, pkt_size; + + pkt_size = APR_HDR_SIZE + sizeof(*fmt); + p = kzalloc(pkt_size, GFP_KERNEL); + if (!p) + return -ENOMEM; + + pkt = p; + fmt = p + APR_HDR_SIZE; + + q6asm_add_hdr(ac, &pkt->hdr, pkt_size, true, ac->stream_id); + + pkt->hdr.opcode = ASM_DATA_CMD_MEDIA_FMT_UPDATE_V2; + fmt->fmt_blk.fmt_blk_size = sizeof(*fmt) - sizeof(fmt->fmt_blk); + + fmt->frame_length = cfg->frame_length; + fmt->compatible_version = cfg->compatible_version; + fmt->bit_depth = cfg->bit_depth; + fmt->num_channels = cfg->num_channels; + fmt->max_run = cfg->max_run; + fmt->max_frame_bytes = cfg->max_frame_bytes; + fmt->avg_bit_rate = cfg->avg_bit_rate; + fmt->sample_rate = cfg->sample_rate; + fmt->channel_layout_tag = cfg->channel_layout_tag; + fmt->pb = cfg->pb; + fmt->mb = cfg->mb; + fmt->kb = cfg->kb; + + rc = q6asm_ac_send_cmd_sync(ac, pkt); + kfree(pkt); + + return rc; +} +EXPORT_SYMBOL_GPL(q6asm_stream_media_format_block_alac); + +int q6asm_stream_media_format_block_ape(struct audio_client *ac, + struct q6asm_ape_cfg *cfg) +{ + struct asm_ape_fmt_blk_v2 *fmt; + struct apr_pkt *pkt; + void *p; + int rc, pkt_size; + + pkt_size = APR_HDR_SIZE + sizeof(*fmt); + p = kzalloc(pkt_size, GFP_KERNEL); + if (!p) + return -ENOMEM; + + pkt = p; + fmt = p + APR_HDR_SIZE; + + q6asm_add_hdr(ac, &pkt->hdr, pkt_size, true, ac->stream_id); + + pkt->hdr.opcode = ASM_DATA_CMD_MEDIA_FMT_UPDATE_V2; + fmt->fmt_blk.fmt_blk_size = sizeof(*fmt) - sizeof(fmt->fmt_blk); + + fmt->compatible_version = cfg->compatible_version; + fmt->compression_level = cfg->compression_level; + fmt->format_flags = cfg->format_flags; + fmt->blocks_per_frame = cfg->blocks_per_frame; + fmt->final_frame_blocks = cfg->final_frame_blocks; + fmt->total_frames = cfg->total_frames; + fmt->bits_per_sample = cfg->bits_per_sample; + fmt->num_channels = cfg->num_channels; + fmt->sample_rate = cfg->sample_rate; + fmt->seek_table_present = cfg->seek_table_present; + + rc = q6asm_ac_send_cmd_sync(ac, pkt); + kfree(pkt); + + return rc; +} +EXPORT_SYMBOL_GPL(q6asm_stream_media_format_block_ape); + /** * q6asm_enc_cfg_blk_pcm_format_support() - setup pcm configuration for capture * diff --git a/sound/soc/qcom/qdsp6/q6asm.h b/sound/soc/qcom/qdsp6/q6asm.h index 5d9fbc75688c..38a207d6cd95 100644 --- a/sound/soc/qcom/qdsp6/q6asm.h +++ b/sound/soc/qcom/qdsp6/q6asm.h @@ -58,6 +58,34 @@ struct q6asm_wma_cfg { u32 adv_enc_options2; }; +struct q6asm_alac_cfg { + u32 frame_length; + u8 compatible_version; + u8 bit_depth; + u8 pb; + u8 mb; + u8 kb; + u8 num_channels; + u16 max_run; + u32 max_frame_bytes; + u32 avg_bit_rate; + u32 sample_rate; + u32 channel_layout_tag; +}; + +struct q6asm_ape_cfg { + u16 compatible_version; + u16 compression_level; + u32 format_flags; + u32 blocks_per_frame; + u32 final_frame_blocks; + u32 total_frames; + u16 bits_per_sample; + u16 num_channels; + u32 sample_rate; + u32 seek_table_present; +}; + typedef void (*q6asm_cb) (uint32_t opcode, uint32_t token, void *payload, void *priv); struct audio_client; @@ -86,6 +114,10 @@ int q6asm_stream_media_format_block_wma_v9(struct audio_client *ac, struct q6asm_wma_cfg *cfg); int q6asm_stream_media_format_block_wma_v10(struct audio_client *ac, struct q6asm_wma_cfg *cfg); +int q6asm_stream_media_format_block_alac(struct audio_client *ac, + struct q6asm_alac_cfg *cfg); +int q6asm_stream_media_format_block_ape(struct audio_client *ac, + struct q6asm_ape_cfg *cfg); int q6asm_run(struct audio_client *ac, uint32_t flags, uint32_t msw_ts, uint32_t lsw_ts); int q6asm_run_nowait(struct audio_client *ac, uint32_t flags, uint32_t msw_ts, -- 2.24.1

1 0

[PATCH v2 6/9] ALSA: compress: add alac & ape decoder params
by Vinod Koul 13 Mar '20

13 Mar '20

Add ALAC (Apple Lossless Audio Codec) and APE (Monkey's Lossless Audio Codec) defines and parameters required to configure these. Signed-off-by: Vinod Koul <vkoul(a)kernel.org> --- include/uapi/sound/compress_params.h | 26 +++++++++++++++++++++++++- 1 file changed, 25 insertions(+), 1 deletion(-) diff --git a/include/uapi/sound/compress_params.h b/include/uapi/sound/compress_params.h index bf6f7155e775..79b14389ae41 100644 --- a/include/uapi/sound/compress_params.h +++ b/include/uapi/sound/compress_params.h @@ -75,7 +75,9 @@ #define SND_AUDIOCODEC_G723_1 ((__u32) 0x0000000C) #define SND_AUDIOCODEC_G729 ((__u32) 0x0000000D) #define SND_AUDIOCODEC_BESPOKE ((__u32) 0x0000000E) -#define SND_AUDIOCODEC_MAX SND_AUDIOCODEC_BESPOKE +#define SND_AUDIOCODEC_ALAC ((__u32) 0x0000000F) +#define SND_AUDIOCODEC_APE ((__u32) 0x00000010) +#define SND_AUDIOCODEC_MAX SND_AUDIOCODEC_APE /* * Profile and modes are listed with bit masks. This allows for a @@ -336,6 +338,26 @@ struct snd_dec_wma { __u32 reserved; } __attribute__((packed, aligned(4))); +struct snd_dec_alac { + __u32 frame_length; + __u8 compatible_version; + __u8 pb; + __u8 mb; + __u8 kb; + __u32 max_run; + __u32 max_frame_bytes; +} __attribute__((packed, aligned(4))); + +struct snd_dec_ape { + __u16 compatible_version; + __u16 compression_level; + __u32 format_flags; + __u32 blocks_per_frame; + __u32 final_frame_blocks; + __u32 total_frames; + __u32 seek_table_present; +} __attribute__((packed, aligned(4))); + union snd_codec_options { struct snd_enc_wma wma; struct snd_enc_vorbis vorbis; @@ -344,6 +366,8 @@ union snd_codec_options { struct snd_enc_generic generic; struct snd_dec_flac flac_d; struct snd_dec_wma wma_d; + struct snd_dec_alac alac_d; + struct snd_dec_ape ape_d; } __attribute__((packed, aligned(4))); /** struct snd_codec_desc - description of codec capabilities -- 2.24.1

1 0

[PATCH v2 5/9] ASoC: qcom: q6asm-dai: add support to wma decoder
by Vinod Koul 13 Mar '20

13 Mar '20

Qualcomm DSPs also supports the wma decoder, so add support for wma decoder and convert the snd_codec_params to qdsp format. Signed-off-by: Vinod Koul <vkoul(a)kernel.org> --- sound/soc/qcom/qdsp6/q6asm-dai.c | 67 +++++++++++++++++++++++++++++++- 1 file changed, 66 insertions(+), 1 deletion(-) diff --git a/sound/soc/qcom/qdsp6/q6asm-dai.c b/sound/soc/qcom/qdsp6/q6asm-dai.c index 8f245d03b6f5..53c250778eea 100644 --- a/sound/soc/qcom/qdsp6/q6asm-dai.c +++ b/sound/soc/qcom/qdsp6/q6asm-dai.c @@ -627,10 +627,13 @@ static int q6asm_dai_compr_set_params(struct snd_compr_stream *stream, int dir = stream->direction; struct q6asm_dai_data *pdata; struct q6asm_flac_cfg flac_cfg; + struct q6asm_wma_cfg wma_cfg; + unsigned int wma_v9 = 0; struct device *dev = c->dev; int ret; union snd_codec_options *codec_options; struct snd_dec_flac *flac; + struct snd_dec_wma *wma; codec_options = &(prtd->codec_param.codec.options); @@ -692,6 +695,67 @@ static int q6asm_dai_compr_set_params(struct snd_compr_stream *stream, return -EIO; } break; + + case SND_AUDIOCODEC_WMA: + wma = &codec_options->wma_d; + + memset(&wma_cfg, 0x0, sizeof(struct q6asm_wma_cfg)); + + wma_cfg.sample_rate = params->codec.sample_rate; + wma_cfg.num_channels = params->codec.ch_in; + wma_cfg.bytes_per_sec = params->codec.bit_rate / 8; + wma_cfg.block_align = params->codec.align; + wma_cfg.bits_per_sample = prtd->bits_per_sample; + wma_cfg.enc_options = wma->encoder_option; + wma_cfg.adv_enc_options = wma->adv_encoder_option; + wma_cfg.adv_enc_options2 = wma->adv_encoder_option2; + + if (wma_cfg.num_channels == 1) + wma_cfg.channel_mask = 4; /* Mono Center */ + else if (wma_cfg.num_channels == 2) + wma_cfg.channel_mask = 3; /* Stereo FL/FR */ + else + return -EINVAL; + + /* check the codec profile */ + switch (params->codec.profile) { + case SND_AUDIOPROFILE_WMA9: + wma_cfg.fmtag = 0x161; + wma_v9 = 1; + break; + + case SND_AUDIOPROFILE_WMA10: + wma_cfg.fmtag = 0x166; + break; + + case SND_AUDIOPROFILE_WMA9_PRO: + wma_cfg.fmtag = 0x162; + break; + + case SND_AUDIOPROFILE_WMA9_LOSSLESS: + wma_cfg.fmtag = 0x163; + break; + + case SND_AUDIOPROFILE_WMA10_LOSSLESS: + wma_cfg.fmtag = 0x167; + break; + + default: + dev_err(dev, "Unknown WMA profile:%x\n", + params->codec.profile); + return -EIO; + } + + if (wma_v9) + ret = q6asm_stream_media_format_block_wma_v9( + prtd->audio_client, &wma_cfg); + else + ret = q6asm_stream_media_format_block_wma_v10( + prtd->audio_client, &wma_cfg); + if (ret < 0) { + dev_err(dev, "WMA9 CMD failed:%d\n", ret); + return -EIO; + } default: break; } @@ -791,9 +855,10 @@ static int q6asm_dai_compr_get_caps(struct snd_compr_stream *stream, caps->max_fragment_size = COMPR_PLAYBACK_MAX_FRAGMENT_SIZE; caps->min_fragments = COMPR_PLAYBACK_MIN_NUM_FRAGMENTS; caps->max_fragments = COMPR_PLAYBACK_MAX_NUM_FRAGMENTS; - caps->num_codecs = 2; + caps->num_codecs = 3; caps->codecs[0] = SND_AUDIOCODEC_MP3; caps->codecs[1] = SND_AUDIOCODEC_FLAC; + caps->codecs[2] = SND_AUDIOCODEC_WMA; return 0; } -- 2.24.1

1 0

[PATCH v2 4/9] ASoC: qcom: q6asm: add support to wma config
by Vinod Koul 13 Mar '20

13 Mar '20

Qualcomm DSPs expect wma v9 and wma v10 configs to be set for wma decoders, so add the API to program the respective wma config to the DSP Signed-off-by: Vinod Koul <vkoul(a)kernel.org> --- sound/soc/qcom/qdsp6/q6asm.c | 123 +++++++++++++++++++++++++++++++++++ sound/soc/qcom/qdsp6/q6asm.h | 17 +++++ 2 files changed, 140 insertions(+) diff --git a/sound/soc/qcom/qdsp6/q6asm.c b/sound/soc/qcom/qdsp6/q6asm.c index 64eb7b6ba305..4cec95c657ba 100644 --- a/sound/soc/qcom/qdsp6/q6asm.c +++ b/sound/soc/qcom/qdsp6/q6asm.c @@ -39,6 +39,8 @@ #define ASM_MEDIA_FMT_MULTI_CHANNEL_PCM_V2 0x00010DA5 #define ASM_MEDIA_FMT_MP3 0x00010BE9 #define ASM_MEDIA_FMT_FLAC 0x00010C16 +#define ASM_MEDIA_FMT_WMA_V9 0x00010DA8 +#define ASM_MEDIA_FMT_WMA_V10 0x00010DA7 #define ASM_DATA_CMD_WRITE_V2 0x00010DAB #define ASM_DATA_CMD_READ_V2 0x00010DAC #define ASM_SESSION_CMD_SUSPEND 0x00010DEC @@ -104,6 +106,33 @@ struct asm_flac_fmt_blk_v2 { u16 reserved; } __packed; +struct asm_wmastdv9_fmt_blk_v2 { + struct asm_data_cmd_media_fmt_update_v2 fmt_blk; + u16 fmtag; + u16 num_channels; + u32 sample_rate; + u32 bytes_per_sec; + u16 blk_align; + u16 bits_per_sample; + u32 channel_mask; + u16 enc_options; + u16 reserved; +} __packed; + +struct asm_wmaprov10_fmt_blk_v2 { + struct asm_data_cmd_media_fmt_update_v2 fmt_blk; + u16 fmtag; + u16 num_channels; + u32 sample_rate; + u32 bytes_per_sec; + u16 blk_align; + u16 bits_per_sample; + u32 channel_mask; + u16 enc_options; + u16 advanced_enc_options1; + u32 advanced_enc_options2; +} __packed; + struct asm_stream_cmd_set_encdec_param { u32 param_id; u32 param_size; @@ -894,6 +923,24 @@ int q6asm_open_write(struct audio_client *ac, uint32_t format, case SND_AUDIOCODEC_FLAC: open->dec_fmt_id = ASM_MEDIA_FMT_FLAC; break; + case SND_AUDIOCODEC_WMA: + switch (codec_profile) { + case SND_AUDIOPROFILE_WMA9: + open->dec_fmt_id = ASM_MEDIA_FMT_WMA_V9; + break; + case SND_AUDIOPROFILE_WMA10: + case SND_AUDIOPROFILE_WMA9_PRO: + case SND_AUDIOPROFILE_WMA9_LOSSLESS: + case SND_AUDIOPROFILE_WMA10_LOSSLESS: + open->dec_fmt_id = ASM_MEDIA_FMT_WMA_V10; + break; + default: + dev_err(ac->dev, "Invalid codec profile 0x%x\n", + codec_profile); + rc = -EINVAL; + goto err; + } + break; default: dev_err(ac->dev, "Invalid format 0x%x\n", format); rc = -EINVAL; @@ -1075,6 +1122,82 @@ int q6asm_stream_media_format_block_flac(struct audio_client *ac, return rc; } EXPORT_SYMBOL_GPL(q6asm_stream_media_format_block_flac); + +int q6asm_stream_media_format_block_wma_v9(struct audio_client *ac, + struct q6asm_wma_cfg *cfg) +{ + struct asm_wmastdv9_fmt_blk_v2 *fmt; + struct apr_pkt *pkt; + void *p; + int rc, pkt_size; + + pkt_size = APR_HDR_SIZE + sizeof(*fmt); + p = kzalloc(pkt_size, GFP_KERNEL); + if (!p) + return -ENOMEM; + + pkt = p; + fmt = p + APR_HDR_SIZE; + + q6asm_add_hdr(ac, &pkt->hdr, pkt_size, true, ac->stream_id); + + pkt->hdr.opcode = ASM_DATA_CMD_MEDIA_FMT_UPDATE_V2; + fmt->fmt_blk.fmt_blk_size = sizeof(*fmt) - sizeof(fmt->fmt_blk); + fmt->fmtag = cfg->fmtag; + fmt->num_channels = cfg->num_channels; + fmt->sample_rate = cfg->sample_rate; + fmt->bytes_per_sec = cfg->bytes_per_sec; + fmt->blk_align = cfg->block_align; + fmt->bits_per_sample = cfg->bits_per_sample; + fmt->channel_mask = cfg->channel_mask; + fmt->enc_options = cfg->enc_options; + fmt->reserved = 0; + + rc = q6asm_ac_send_cmd_sync(ac, pkt); + kfree(pkt); + + return rc; +} +EXPORT_SYMBOL_GPL(q6asm_stream_media_format_block_wma_v9); + +int q6asm_stream_media_format_block_wma_v10(struct audio_client *ac, + struct q6asm_wma_cfg *cfg) +{ + struct asm_wmaprov10_fmt_blk_v2 *fmt; + struct apr_pkt *pkt; + void *p; + int rc, pkt_size; + + pkt_size = APR_HDR_SIZE + sizeof(*fmt); + p = kzalloc(pkt_size, GFP_KERNEL); + if (!p) + return -ENOMEM; + + pkt = p; + fmt = p + APR_HDR_SIZE; + + q6asm_add_hdr(ac, &pkt->hdr, pkt_size, true, ac->stream_id); + + pkt->hdr.opcode = ASM_DATA_CMD_MEDIA_FMT_UPDATE_V2; + fmt->fmt_blk.fmt_blk_size = sizeof(*fmt) - sizeof(fmt->fmt_blk); + fmt->fmtag = cfg->fmtag; + fmt->num_channels = cfg->num_channels; + fmt->sample_rate = cfg->sample_rate; + fmt->bytes_per_sec = cfg->bytes_per_sec; + fmt->blk_align = cfg->block_align; + fmt->bits_per_sample = cfg->bits_per_sample; + fmt->channel_mask = cfg->channel_mask; + fmt->enc_options = cfg->enc_options; + fmt->advanced_enc_options1 = cfg->adv_enc_options; + fmt->advanced_enc_options2 = cfg->adv_enc_options2; + + rc = q6asm_ac_send_cmd_sync(ac, pkt); + kfree(pkt); + + return rc; +} +EXPORT_SYMBOL_GPL(q6asm_stream_media_format_block_wma_v10); + /** * q6asm_enc_cfg_blk_pcm_format_support() - setup pcm configuration for capture * diff --git a/sound/soc/qcom/qdsp6/q6asm.h b/sound/soc/qcom/qdsp6/q6asm.h index 1cff7f68b95d..5d9fbc75688c 100644 --- a/sound/soc/qcom/qdsp6/q6asm.h +++ b/sound/soc/qcom/qdsp6/q6asm.h @@ -45,6 +45,19 @@ struct q6asm_flac_cfg { u16 md5_sum; }; +struct q6asm_wma_cfg { + u32 fmtag; + u32 num_channels; + u32 sample_rate; + u32 bytes_per_sec; + u32 block_align; + u32 bits_per_sample; + u32 channel_mask; + u32 enc_options; + u32 adv_enc_options; + u32 adv_enc_options2; +}; + typedef void (*q6asm_cb) (uint32_t opcode, uint32_t token, void *payload, void *priv); struct audio_client; @@ -69,6 +82,10 @@ int q6asm_media_format_block_multi_ch_pcm(struct audio_client *ac, uint16_t bits_per_sample); int q6asm_stream_media_format_block_flac(struct audio_client *ac, struct q6asm_flac_cfg *cfg); +int q6asm_stream_media_format_block_wma_v9(struct audio_client *ac, + struct q6asm_wma_cfg *cfg); +int q6asm_stream_media_format_block_wma_v10(struct audio_client *ac, + struct q6asm_wma_cfg *cfg); int q6asm_run(struct audio_client *ac, uint32_t flags, uint32_t msw_ts, uint32_t lsw_ts); int q6asm_run_nowait(struct audio_client *ac, uint32_t flags, uint32_t msw_ts, -- 2.24.1

1 0